DC S30 Digital Camera
User’s Manual
Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1
1.2.3 Bottom View..........................................................2
2.3 Charging the Battery ..............................................6
2.4 Loading an SD Memory Card................................7
2.5 Attaching the Strap.................................................8
3. Using the DC S30
9
3.1 Capture Mode........................................................ 9
3.1.1 Composing Pictures ................................................9
3.1.2 About the LCD Monitor Icons..................................9
3.1.3 Using the LCD Monitor in Manual Mode.................10
3.1.4 LCD Monitor Display (Capture Mode)....................10
3.1.5 Using the Optical Zoom............................................... 11
3.1.6 Using the Digital Zoom................................................ 11
I
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
3.3.9 Protect Mode ......................................................25
3.3.10 SlideShow .........................................................26
3.4 Listening to Music................................................26
3.4.1 Transferring MP3 files to the Camera ......................26
3.4.2 Playing MP3 Files .................................................27
3.4.3 Playing FM Radio Files ..........................................27
3.5 SET-UP MODE....................................................28
3.5.1 Memory .............................................................28
3.5.2 Number Reset .....................................................28
3.5.3 Date/Time ..........................................................29
3.5.4 Date Format .......................................................29
3.5.5 LCD Brightness ...................................................30
II
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
3.5.7 Video Out Format ................................................30
3.5.10 Reset ................................................................32
33
4.1 Installing the Digital Camera Software ...............33
4.2 Bundled Software .................................................34
4.3 Transferring Files with your PC ..........................35
4.3.1 Transferring Images, Movies, and MP3 Files ............35
4.4 Viewing Images on TV.........................................36
5. Troubleshooting
37
5.1 Error Message Table.............................................37
6. Specifications
38
40
7. Service information
III
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
BenQ DC 5330 Table of Contents
IV
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
1
TOURING YOUR DC S30
1.1 Checking the Package Contents
The package includes the following items:
7
DC S30 Digital Camera
User’s Manual
1
8
9
BenQ
Welcome
2
3
4
10
5
6
1. User's manual
2. DC S30 digital camera
3. AVcable
4. USB cable
5. Lithium-ion battery (rechargeable)
6. Hand strap
7. DC S30 software CD-ROM
8. Camera pouch
9. AC power adapter
10. Earphones
If anything is missing or appears damaged, contact your dealer. Save the packaging in the
event you need to ship your camera for service.
1
Touring your DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
1.2 DC S30 Components
1.2.1 Front View
1. Speaker
2
1
2. Shutter button
3. Built-in flash
4. Optical viewfinder
5. Lens/lens cover
3
6. Self-timer/AF assist lamp
4
7. Microphone
8. Earphone and A/V OUT terminal
9. USB port
10. DC IN 5V terminal
7
8
5
6
9
10
1.2.2 Rear View
1. Shutter button
5
4
3
2
1
2. Flash/right navigation button
3. Zoom/volume adjust/menu
up & down navigation button
6
4. Macro/left navigation button
5. Viewfinder LED
6. Viewfinder
M
A
7
7. LCD panel
8. Quick View/delete button
O-VIEW/DEL
8
MENU-C
LCD/SET
9
9. Menu/cancel
10. LCD/SET
11. Mode dial
12. Strap attachment
10
11
12
1.2.3 Bottom View
1. Tripod socket
2. Battery cover open detector
Note: Do not touch this detector.
3. Lithium ion battery compartment
4. SD memory card slot
1
2
3
4
Notes
•
•
The LCD on the digital camera is manufactured with sophisticated technology.
However, the display may have some light spots or show unusual colors. This is
normal and does not indicate display malfunction, and will not affect the pictures
you take with the camera.
The AF assist lamp is used to illuminate the focus subject in low light situations
where other camera’s autofocus will likely have failed.
2
Touring your DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
1.2.4 Button Functions
1. Macro
1
2
3
• Recording/Video Mode – press this button
to enable Macro mode.
• Playback Mode – press to select previous
file.
• Menu Mode – press to move left in the
menus.
• MP3 Mode – press to skip to the previous
track.
4
• FM Radio Mode – press to scan for a
previous channel.
2. Zoom
Q-VIEW/DEL
MENU/C
5
6
• Recording/Playback/Video Mode – press
up to zoom in; press down to zoom out.
LCD/SET
7
•
MP3/FM Radio Mode – press up to
increase the volume; press down to decrease
it.
• Thumbnail Mode – press up or down to navigate thumbnail images.
• Menu Mode – press up or down to change values.
3. Flash
• Manual Record Mode – press button to cycle through Flash modes.
• Playback Mode – press to select next file.
• MP3 Mode – press to skip to the next track.
• FM Radio Mode – press to scan for the next channel.
• Menu Mode – press to move right in the menus.
4. Mode Dial (refer to next page)
5. Q-View/Delete
• Recording Mode – press to view the last image that was taken.
• Playback Mode – press to delete current image or movie.
• MP3 Mode – press for less than two seconds to switch between playback modes
(repeat all, repeat one, standard play). Press for more than two seconds to lock
camera buttons; only the power button functions in this mode.
• FM Mode – press for two seconds to lock buttons; only the power button functions in
this mode. Press for less than two seconds to switch the audio output between the
earphone and speaker.
6. Menu/Cancel
• Recording/Playback/Video Modes – opens the menus.
• Menu Mode – cancels an operation or exits menu mode.
7. LCD/SET
• Recording/Video Mode – press to switch between display modes: OSD (on-screen-
display) full display, OSD display OFF, and LCD OFF.
• Playback Mode – press to switch between playback modes: standard image, image
only, and thumbnail mode.
• Menu Mode – press to confirm action.
• MP3 Mode – press to toggle between play and pause modes.
• FM Radio Mode – press for less than two seconds to switch FM radio stations. Press
for more than two seconds to save the current station to a channel; select the channel
to tune to the station.
3
Touring your DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
1.2.5 Mode Dial
1
1.
2.
Manual Mode
Auto mode
2
3
4
3.
Playback mode
4.
5.
Movie mode
Audio Mode
5
1.2.6 Viewfinder LED Indicator
Green
Orange
1. Power on detected
2. Ready to use or AF action
completed
ON
Battery charging in progress
3. USB connection
(non accessing)
Blinking (slow)
Blinking (fast)
1. Warning message
2. Power low
Processing
Accessing mass storage
Flash is charging
1.2.7 Rotating the LCD Panel
The LCD panel can be rotated 180 degrees as shown,
enabling you to take pictures of yourself.
4
Touring your DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
2
PREPARING YOUR DC S30 FOR USE
The Lithium Ion battery enables you to capture images and video clips, and listen to music or
FM radio on the go. Use the AC adapter whenever possible to conserve battery power.
2.1 Inserting the Battery
1. Turn the camera off.
2. Slide the battery cover in the direction of the
A
O
-V
IE
arrow (A) and open the battery cover (B).
3. Push the battery latch in the direction of the
arrow (C) and insert the battery in the cor-
rect orientation as shown (D) with the
notches facing up.
W
-D
E
L
MENU/C
L
C
D
/S
E
T
4. Close the battery/SD Memory Card cover (E).
A
To remove the battery: Open the battery cover and
then push the battery latch. The battery pops out
slightly; pull the battery out.
M
A
Q-V
IEW
/D
EL
MEN
U-C
LC
D/S
ET
B
Notches
Battery latch
A
M
A
O
-V
IE
W
-D
E
L
Q-VIEW/DEL
MENU/C
MEN
U-C
L
C
D
/S
E
T
LC
D/S
ET
C
E
D
Notes
•
•
Use only the specified battery type (Lithium Ion).
If you are not going to use the battery for an extended period of time, remove it
from the camera to prevent leakage or corrosion.
•
Avoid using battery in extremely cold environments as low temperatures can
shorten the battery life and reduce camera performance.
5
Preparing Your DC S30 for Use
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
2.2 Using an AC Power Adapter
1. Make sure the camera power is off.
2. Connect one end of the AC power adapter to the
DC IN 5V terminal (A).
B
3. Connect the other end of the AC power adapter to
a power outlet (B).
A
Notes
• Use only the AC power adapter specified for the camera. Damage caused by the use of
an incorrect adapter is not covered under the warranty.
• Use an AC power adapter while transferring images to your computer in order to pre-
vent data loss from unexpected automatic power off of the camera.
2.3 Charging the Battery
1. Insert the battery as described in 2.1“Inserting the Battery” on page 5.
2. Connect the AC power adapter as described in the previous section, or connect the USB
cable to your camera and a USB enabled device such as a notebook or PC.
The following describes the LED indicators:
•
•
Orange LED: charging starts
LED Off: charging is complete
Notes
•
•
•
Use only the AC power adapter specified for the camera. Damage caused by the
use of an incorrect adapter is not covered under the warranty.
When using the USB cable to charge the camera, turn the camera off for better
charging performance.
Avoid exposing the camera to hot temperatures. Use it at room temperature for
best results.
6
Preparing Your DC S30 for Use
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
2.4 Loading an SD Memory Card
All images and video clips taken by the camera can be stored in an SD (Secure Digital)
Memory Card as well as the camera’s internal memory. Even if the camera’s power is OFF, the
images saved in the SD Memory Card are not erased.
1. Make sure the camera is off.
2. Slide the battery/SD Memory Card cover in the
direction of the arrow on the cover.
M
A
Q-V
IEW
/DE
L
ME
3. Insert an SD Memory Card:
NU-C
LC
D/S
ET
•
The front side of the memory card (printed
arrow) should face towards the front side of
the camera.
•
If the card cannot be inserted, check the ori-
entation.
4. Close the battery/SD Memory Card cover.
To remove the SD Memory Card, make sure the camera is off. Open the battery/SD Memory
Card card cover. Press lightly on the edge of the memory card and it will eject.
Notes
•
To prevent valuable data from being
accidentally erased from an SD Memory
Card, slide the write-protect tab (on the
side of the SD Memory Card) to
"LOCK".
Press the tab in the
direction of the arrow
on the card to write
protect the SD Memory
Card.
K
C
O
L
Write-protect tab
•
•
To save, edit, or erase data on an SD
Memory Card, you must unlock the card.
Format your SD Memory Card before use. Refer to 3.5.1“Memory” on page 28.
7
Preparing Your DC S30 for Use
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
2.5 Attaching the Strap
To prevent accidentally dropping the
camera when using your camera, always
use the strap.
1. Thread the small loop of the hand
strap through the strap eyelet on the
camera (A).
A
2. Pull the large loop through the small
loop until the strap is firmly secured (B).
B
8
Preparing Your DC S30 for Use
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3
USING THE DC S30
This chapter describes the camera operating modes, and explains how to take pictures, make
movies, and listen to audio such as MP3 files or FM radio.
3.1 Capture Mode
Auto capture mode enables you to take pictures and allow the camera to set camera functions
such as the white balance and focus automatically. Manual mode enables you to make more
precise settings to accommodate different shooting conditions.
3.1.1 Composing Pictures
Your camera provides three capture mode options: single image capturing, continuous image
capturing, and self-timer capturing. It is equipped with both an optical viewfinder and a 1.5-
inch full color LTPS LCD monitor to compose images. Taking images using the optical
viewfinder conserves battery power. Using the LCD monitor helps you accurately compose
pictures and examine all details. However, the LCD consumes more battery power.
1. Turn the camera on by pressing the POWER button.
2. Set the mode dial to Auto
or Manual mode
.
3. Compose your shot in the viewfinder.
4. Press the shutter button down halfway to enable the autofocus
to get a clear image, and then press it down fully to capture the
image.
3.1.2 About the LCD Monitor Icons
The following icons are displayed in the LCD screen when Auto mode
is selected.
Scene
Picture size
Flash status
Effect
Remaining number of
shots
A
L15
A
Self-timer
T
Zoom state
Focus area
W
Battery condition
9
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.3 Using the LCD Monitor in Manual Mode
The following additional icons are displayed in the LCD screen when Manual
mode
is selected.
ISO
White balance
Metering
1
A
XL15
A
A
A
T
Macro mode
W
EV+1.0
Exposure value
3.1.4 LCD Monitor Display (Capture Mode)
Press the LCD/SET button to
select the display format. In
"Still Image"or "Movie"
mode, preview image with full
OSD is displayed.
Q-VIEW/DEL
MENU/C
LCD/SET
LCD/SET button
The following illustration shows the LCD monitor display sequence.
OSD (on-screen-display) full display OSD display OFF
LCD OFF
Notes
•
•
The image in the LCD monitor darkens in strong sunlight or bright light. This is not a
malfunction.
Using the LCD monitor for an extended period of time uses battery power and there-
fore decreases the number of images you can take. To conserve battery power, it is rec-
ommended to turn the LCD monitor off and use the viewfinder instead.
10
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.5 Using the Optical Zoom
The lens moves during zoom photography. Zoom photography allows you to take telephoto
and wide-angle shots. The subject appears closer by pressing the
farther away by pressing the button.
1. Set the mode dial to Manual mode
mode , or Movie mode
2. Power on the camera.
button and appears
, Auto
Zoom button
.
3. Compose the picture in the LCD screen by
pressing zoom in or zoom out.
•
Pressing the zoom button up zooms in on
the subject, and enlarges the subject in the
LCD monitor.
•
Pressing the zoom button down provides a
wider angle picture.The lens position moves
according to the zoom button setting.
4. Press the shutter button down halfway to enable the autofocus to get a clear image, and
then press it down fully to capture the image.
3.1.6 Using the Digital Zoom
By using the digital zoom, images can be enlarged so that the subject appears closer. However,
the more the image is enlarged, the grainer the image will become. The digital zoom function
is only available when you set the LCD monitor and the digital zoom to ON. To capture a
digitally zoomed image, perform the following steps:
Digital Zoom
1. Set the mode dial to Manual mode
mode , or Movie mode
2. Power on the camera.
, Auto
.
A
L15
A
3. Compose the picture in the LCD screen.
T
4. Press the zoom button up
to zoom in on
the subject. When maximum optical zoom is
reached, continue pressing the zoom in
button to activate the digital zoom. The zoom
bar indicates the current digital zoom level.
W
Optical Zoom
Notes
•
•
The camera has a 1.0X to 3.0X optical zoom and 1.0X to 4.0X digital zoom func-
tion.
The digital zoom function is unavailable when you turn the LCD off.
11
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.7 Using the Flash
The flash is designed to function automatically when lighting conditions warrant the use of
flash. You can take an image using a suitable Flash mode to your circumstances. If you change
the Flash mode, the camera will retain that setting even if the camera is turned off.
1. Set the mode dial to Manual mode
2. Power on the camera.
or Auto mode
.
3. Press the
button repeatedly to toggle the Flash modes. Available Flash modes are
displayed in the following order:
Auto
Red-Eye Reduction
Flash off
Forced Flash
4. Press the shutter button down halfway to enable the autofocus to get a clear image, and
then press it down fully to capture the image.
Note
After the flash fires, it takes approximately 5 to 10 seconds to be ready for the next
shot.
The camera has four Flash modes: Auto, Red-Eye Reduction, Forced Flash, and Flash Off.
The table below helps you to choose the appropriate Flash mode:
Icon
Flash Mode
Description
Auto Flash
The flash fires automatically according to the ambient lighting conditions.
The flash fires automatically according to the ambient lighting conditions.
Select this mode for general photography. The flash emits a precursor-flash
before the main flash fires. This causes the pupil in the human eyes to
contract, reducing the red-eye phenomenon. Select this mode when taking
images of people and animals in low-light conditions.
Red-Eye
Reduction
The flash fires regardless of the surrounding brightness. Select this mode to
record images with high contrast (back lighting) and deep shadows.
Forced Flash
Flash Off
The flash does not fire.Select this mode when taking images in a place where
flash photography is prohibited, or when the distance to the subject is beyond
the effective range of the flash.
Note
•
•
•
In
In
In
Portrait mode, the flash setting is fixed to Red-Eye Reduction mode automatically.
Sports mode, the flash setting is fixed to
Night scene mode, the flash setting is fixed to
.
.
12
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.8 Changing the Focus
1. Set the mode dial to Manual mode
Auto mode
or
Macro button
.
2. Power on the camera.
3. Press the macro button
.
When Macro mode is enabled, the icon
is displayed on the LCD monitor.
1
A
A
XL15
A
A
Macro icon
[No Icon]: Normal Auto Focus
(50 cm to infinity). Use for far away
subjects and landscapes.
T
Macro Auto Focus (15 cm to 50
cm). This preset optimizes the camera
for taking close up shots of objects at a
distance of around 15 cm from the
camera. Close-up photos taken with
the Macro preset have betters results
than close up photos taken under other
presets.
W
EV+1.0
Notes
•
•
When shooting a close-up in Macro mode, use the LCD monitor to compose your
shot, avoiding the off-center parallax phenomenon.
There is not a distinct point (subject range) at which Normal mode is favored over
Macro mode; take an image in both optical modes and compare the results to decide
which mode is optimal in any given situation.
•
After a Macro shot is taken DO NOT FORGET to reset the lens to the normal posi-
tion.
13
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.9 Capture Mode Setup
This menu is for setting the basic setting to be used for photography in Manual
and
Auto
capture modes. The Manual and Auto mode icons denote whether the setting is
available for that mode or not.
3.1.9.1 Navigating in the Capture Setting Menus
1. Set the mode dial to one of the
Capture Mode
Setup Mode
Setting Options
available modes.
2. Press the MENU/C button. The
menu screen is displayed.
Shoottmode
1
3. Press the zoom in
buttons to go up and down in
the menus.
and zoom out
XL
4. Press the macro
and flash
buttons to select and set the mode
setting.
Current Setting
X
Indicates currently selected mode item
5. Press the zoom in
and flash buttons to select and set the mode setting as before.
6. Press MENU/C to exit the menus.
or zoom out
buttons to select another mode. Press the macro
Note
When you select a setting for a mode, it is set—you don’t need to perform any other
action.
3.1.9.2 Capture Mode
Sets the capture mode at which the image is to be recorded.
1
Single: 1 shot mode (default)
Shoottmode
Continuous: In this mode, photographs are
1
taken continuously at a maximum speed of 0.5 second
XL
speed interval. The maximum number of photographs
that can be taken continuously is 3 photographs.
Self-timer: enables you to set the timer to take a
shot. When this mode is enabled, the picture will be
taken 10 seconds after the shutter button is pressed.
Notes
•
•
Use self-timer mode when you want to be included in the shot.
Use a tripod for best results.
14
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.9.3 Resolution
Set the desired image size.
XL
Size
Extra Large: 2848 x 2160 pixels (interpolated)
1
XL
L
M
S
Large: 2048 x 1536 pixels (default)
L
Medium: 1600 x 1200 pixels
M
S Small: 1280 x 960 pixels
Notes
•
•
Larger image sizes use more memory.
XL (2848 x 2160) cannot be used with continuous mode or digital zoom.
3.1.9.4 Quality
Set the quality (compression ratio) sharpness at which
the image is to be recorded.
Quality
1
Fine: 1/8 compression (still image) (default)
Economy: 1/16 compression (still image)
3.1.9.5 Scene
XL
Enables you to load preset settings for different
shooting conditions.
Scene
A Auto: Select this mode to enable the camera to
make automatic adjustments. (default)
1
XL
A
Portrait: Select this mode to make people stand
out with the background out-of-focus. Flash setting is
fixed to red-eye reduction mode automatically.
Landscape: Select this mode when taking
pictures of landscape subjects. Flash photography is not possible.
Night Scene: Select this mode to take photographs at night. Flash setting is fixed to
Flash Off at a slower shutter speed.
15
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
Sport: Select this mode to take photographs of fast-moving subjects.
Back Light: Select this mode when the subject has a strong light source behind it.
3.1.9.6 White Balance
The camera determines the white balance by averaging
the various kinds of light that actually enters the lens.
You may set in advance the white balance when taking
WB
photographs under specific lighting conditions.
1
XL
A Auto: Auto white balance (default). Automatically
adjusts the white balance.
A
Daylight: Adjusts the white balance for bright
daylight conditions.
Cloudy: Adjusts the white balance for cloudy, twilight, or shady conditions.
Tungsten: Adjusts the white balance for subjects illuminated by tungsten light.
Fluorescent: Adjusts the white balance for subjects illuminated by fluorescent light.
3.1.9.7 Effect
Enables you to apply a tone or color to your images to
create an artistic effect.
Effect
RGB: Photographs using standard settings.
(default)
A
B&W: Pictures include no colors except black,
white and shades of gray. This is another easy way to
add distinctiveness to your pictures.
Sepia: Photographs to create a warmer print
tone use sepia toning. The shadows remain black while the mid-tones of the image are
adjusted towards brown and orange colors. This produces warm, old-fashioned artistic style
photographs.
Vivid: Photographs to bring out sharper and more vibrant colors.
16
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.9.8 ISO
Set the photographic sensitivity at which the image is to
be recorded.
ISO
A Auto: Automatically set between ISO 100 to ISO
400. (default)
A
1
00
2
00
400
1
00
100: Equivalent to color ISO100. Use for outdoor
photography in bright sunlight.
2
00
200: High-sensitive photography equivalent to
color ISO200. Use for outdoor photography or brightly lit indoor photography.
4
00
400: High-sensitive photography equivalent to color ISO400. Use for indoor
photography or other low-light environments.
3.1.9.9 Focusing
Enables you to change the focus. Select the region of the
subject seen in the LCD display that the digital camera
focuses on by setting the Auto focus window position.
Focusing
A
Central: In central auto focus window mode, the
camera focuses on the center region of the framed shot.
(default)
5 Area: In this mode, the camera displays five
focus points. To use this mode, press the shutter button
halfway. The five focus areas appear as shown. The green
square indicates the recommended focus.
17
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.9.10 Exposure Value
This setting allows you to intentionally lighten or
darken the entire image. Use this setting when the
optimum brightness (exposure) cannot be obtained, for
example, when the brightness between the subject and
the background is not balanced or when the subject to
photograph occupies only an extremely small part of
the screen.
Exposure
A
EV BIAS: Press the macro
and flash
buttons to adjust the EV from -2.0 to +2.0.
Effective Subjects and Set Values
Positive (+) Compensation
•
•
•
•
Copying of printed text (black characters on white paper)
Backlit portraits
Very bright scenes (such as snowfields) and highly reflective subjects
Shots made up predominantly of sky
Negative (-) Compensation
•
•
•
Spotlit subjects, particularly against dark backgrounds
Copying of printed text (white characters on black paper)
Scenes with low reflectivity, such as shots of green or dark foliage
Notes
•
In “Exposure compensation”, the default value is “0.0EV”. The setting range is as fol-
lows:
-2.0 / -1.6 / -1.3 / -1.0 /- 0.6 / -0.3 / 0 (default) / +0.3 / +0.6/ +1.0 / +1.3 / +1.6 / +2.0
•
•
Exposure Compensation cannot be set in
mode.
The ideal brightness sometimes cannot be obtained even if a large exposure value is
set in dark photographic conditions. In this case, you can check the brightness in the
preview image directly (photographed still image).
18
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.1.9.11 Metering
The camera calculates the exposure level before a
photograph is taken.
Metering
Center-weighted Average: The camera
adjusts itself based on the average light measurement
over the center region of the viewfinder. (default)
A
Spot: The exposure is measured in a very small
area at the center of the screen. It is possible to calculate
the exposure of a subject without being affected by the
surrounding environment.
Matrix: The camera adjusts itself based on the average light measurement over the
entire region of the viewfinder.
3.1.9.12 Date Imprint
Enables you to imprint a date mark on your printed
images.
Focusing
On
On: The current date is imprinted on your image.
A
Off
Off: Date imprinting is disabled. (default)
19
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.2 Taking Videos
7. Video mode enables you to record video clips. The video length depends on the capacity
of the inserted memory card or built-in memory.
Set the mode dial
to take moving images with voice recording. The camera shows the
preview image on the LCD monitor.
Note
In
mode, the LCD monitor cannot be turned off.
3.2.1 Movie Mode
Mode dial setting
Zoom state
00:00/15:57
REC (Shutter)
Battery condition
Available recording time
Follow these instructions to take a movie.
1. Set the mode dial to
.
Compose the picture, press the shutter button down halfway, and then press it down fully.
Photography begins. [REC] appears on the LCD
monitor.
REC
2. To stop making movies, press the shutter button
down fully again.
If you do not do this, photography is automatically
stopped when there is no more free space on the SD
Memory Card or built-in memory.
15:57
(Shutter)
Note
•
•
In
In
mode, EV compensation cannot be set or activated.
mode, the Flash mode is automatically set to [OFF].
20
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.3 Playing Back Images
Playback mode enables you to view your images or movies either one at a time or in
thumbnail mode.
1. Set the mode dial to
The last recorded image or movie appears on the LCD monitor.
2. Press the button to advance to the next frame. Press the button to go back one
frame.
and power on the camera.
3.3.1 Playback Mode
The following illustration shows the movie and image playback screen in detailed mode.
File number
Playback
movie
Playback
image
007/007
003/007
Volume
level
Zoom
level
00:19/00:19
(Shutter)
(Shutter)
Movie
length
Voice memo record index
Playback index
Image Playback
Movie Playback
Note
Press LCD/SET to switch between standard mode, image only mode, and
thumbnail mode.
Standard
Image Only
Thumbnail
21
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.3.2 Thumbnail Display
This function allows you to view nine thumbnail images
on the LCD monitor simultaneously so that you can
quickly scan for a particular image.
1. Press the LCD/SET button until nine images are
displayed simultaneously.
2. Press zoom in
down in thumbnail display. Press macro
flash to move left and right.
and zoom out
to move up and
and
3. Press the LCD/SET button to display the selected
image or movie on the full screen.
3.3.3 Voice Memo Record
Press the shutter button during image playback to
record a voice memo for the picture. When voice memo
recording is in process, the LCD displays the recording
time. Voice memos can be up to 20 seconds long and are
saved in WAV and HTML format.
Press the shutter button again to end the voice
recording.
00:11/00:20
(Shutter)
If an image has a voice memo attached to it, press the
shutter button to listen to the voice memo.
Note
To replace a voice memo, delete the current voice memo first by pressing
MENU/C under Playback mode. Refer to 3.3.7.1“Erasing Files” on page 24.
22
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.3.4 Playing Back Movies
Press the shutter button to play back movies that you have recorded. Press the shutter button
again to stop movie playback.
Volume indicator
Pressing zoom in
to increase the movie playback
to decrease the volume. The
volume. Press zoom out
volume indicator shows the volume setting.
003/007
00:19/00:19
(Shutter)
Movie playback mode
00:19/00:19
(Shutter)
Playback in progress
3.3.5 Zoom Playback
The camera has up to 4x playback digital zoom. While reviewing your images, you may
enlarge a selected portion of an image. This magnification allows you to view fine details.
Movies cannot be displayed using the zoom playback feature.
•
•
Pressing zoom in
enlarges the image.
Press zoom out
tion.
to return to normal magnifica-
•
When zoomed in on an image, press LCD/SET.
Four arrows appear in the display. Press zoom in
and zoom out
to pan up and down in the
zoomed image. Press macro
and flash
to
(Set)
pan left and right in the image.
23
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.3.6 Erasing Images and Movies
Press Q-VIEW/DEL to delete an image or
movie during playback. You are prompted to
confirm the deletion as shown below.
Q-VIEW/DEL
Delete button
MENU/C
LCD/SET
Yes
No
Press macro
to select YES and then press LCD/SET to delete the image. If you decide you
to select NO and press LCD/SET.
do not want to delete the image, press flash
Note
•
•
You can also delete images in Playback Mode Setup. Refer to the next section.
You cannot delete images in Thumbnail mode.
3.3.7 Playback Mode Setup
This section describes the Playback mode Setup menus. Playback mode Setup enables you to
erase files, set thumbnail view mode, lock files, and set the slide show.
3.3.7.1 Erasing Files
1. In Playback Mode, press MENU/C.
2. Select Erase
available.
. The following options are
Erase
Erase Single: erases a single image or
movie.
Erase All: erases all images and movies.
Erase Voice Memo: erases the voice memo
attached to the currently viewed image.
3. Make your selection and press LCD/SET to delete
the files. You are prompted to confirm the deletion.
4. Select Yes and press LCD/SET to delete the files.
Yes
No
24
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
Note
Images cannot be erased when they are protected or the SD Memory Card is write-
protected.
3.3.8 Thumbnail Mode
1. In Playback Mode, press MENU/C.
2. Select Thumbnail
.
Thumbbnail
3. Press LCD/SET. The LCD displays thumbnail
mode.
4. Select an image or movie and press LCD/SET to
display the image or movie in full screen mode.
3.3.9 Protect Mode
This function prevents an image from being erased.
1. In Playback Mode, press MENU/C.
2. Select Lock
. The following options are available:
Thumbbnail
Lock Single: locks the currently selected
image or movie
Unlock Single: unlocks the currently
selected image or movie
Lock All: locks all images and movies
Unlock All: unlocks all images and movies
3. When you have made your selection, you are
prompted to confirm the action.
Yes
No
4. Select Yes, and press LCD/SET to complete the
action.
25
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.3.10 SlideShow
The slide show function enables you to play back your images automatically in sequential
order as a slide show. This is a very useful and entertaining feature for reviewing recorded
images and for presentations.
1. In Playback mode, press the MENU button.
2. Select SlideShow
3. Press LCD/SET.
.
Slideshow
The slide show begins. The pictures are displayed at
3 second intervals.
4. Press MENU/C to stop the slide show.
Note
The Auto Power Off function does not operate during the slide show.
3.4 Listening to Music
The camera features both MP3 and FM radio playback. Copy MP3 files from your PC to the
camera’s internal or external memory using the USB cable.
3.4.1 Transferring MP3 files to the Camera
1. Establish a connection between the camera and your computer.
2. There is a folder called ‘MP3’ on your camera’s memory card. Transfer the MP3 files from
your computer to the camera's MP3 folder.
Notes
•
•
You can play MP3 music files through the camera's speaker or through the ear-
phones.
If power saving is enabled, the LCD turns on normally, and after 1 minutes of
user inaction, the LCD screen enters suspend mode; press any button to awaken
the LCD screen from suspend mode. If power saving is not enabled, the LCD
screen does not turn off.
•
When a warning message (such as battery power empty warning) occurs, the
MP3 playback stops and the camera emits warning sounds.
26
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.4.2 Playing MP3 Files
Follow these instructions to play MP3 files.
1. Power on the camera and select music mode
The music mode screen appears.
2. Select the MP3 player and press LCD/SET. The first
MP3 track appears and begins playing. The
following explains how to control playback.
.
MP3 Player
FM Radio
•
Press Q-VIEW/DEL for less than two seconds to
switch between playback modes: All tracks
repeat/one track repeats/normal playback. Press
Q-VIEW/DEL for more than two seconds to
lock and unlock the camera. When locked, only
the power button is functional.
01 / 01 TRACK
•
•
Press LCD/SET to stop and start playback.
Press zoom in
and zoom out
to raise and
00:37/03:32
lower the volume.
•
Press macro
flash to play the next track.
to play the previous track. Press
Your camera supports the following
audio types:
•
•
•
MPEG-1 Audio Layer-3
Bitrates from 32 to 320 kbps
Sampling frequencies: 32, 44.1,
48 kHz
3.4.3 Playing FM Radio Files
1. Power on the camera and select music mode
The music mode screen appears.
.
2. You must connect your earphones for the FM radio
to work (the earphone wire acts as an antenna).
Select the FM Radio and press LCD/SET. The FM
radio screen appears. The following explains how to
control playback.
MP3 Player
FM Radio
•
Press Q-VIEW/DEL for less than two seconds to
switch the audio output between the earphone
(default) and the camera speaker. Press
Q-VIEW/DEL for more than two seconds to
lock and unlock the camera. When locked, only
the power button is functional.
87 . 50 MHZ
STEREO
•
Press LCD/SET for less than two seconds to
switch between common stations. Press
LCD/SET for more than two seconds to save the
current station to a common channel.
2
3
4
5
6
7
8
9
10
Example: Press LCD/SET to select a channel (e.g, 6).
Scan to a frequency (e.g, 101.1). Press LCD/SET for
more than two seconds. 101.1 is saved to channel 6.
•
•
Press zoom in
Press macro
next available channel. Press macro
and zoom out
or flash for more than two seconds to scan for the previous or
or flash for less than two seconds to adjust
the tuning to the previous/next frequency in 0.1 MHz steps.
to raise and lower the volume.
27
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.5 SET-UP MODE
This feature allows you to set up the default settings for using your camera in addition to
image-related settings. Select your personal preferences for the camera with this mode.
SD
3.5.1 Memory
This item enables you to format the SD Memory Card
or built-in memory in your camera. All images and
movies, including protected images are erased. An SD
Memory
SD
SD
Memory Card can’t be formatted if it is write-protected.
This item also lets you copy images and movies on the
internal memory to the SD Memory Card.
SD
09 / 07 / 2018
YMD
YMD
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press
to navigate to the top of the menu, and
then press
to select Setup mode
.
SD
3. Select Memory
available:
. The following options are
SD
Copy: copies the internal memory to the external flash card.
Format: formats the memory.
SD
4. Press LCD/SET when you have made your selection. You are prompted to confirm the
action.
5. Select Yes and press LCD/SET to complete the action. Otherwise, select No.
123
3.5.2 Number Reset
Enables you to reset file numbering in memory to 0001.
1. In Manual, Auto, or Movie mode, press MENU/C.
NumReset
2. Press
to navigate to the top of the menu, and
SD
SD
then press
to select Setup mode
.
09 / 07 / 2018
YMD
123
3. Select NumReset
.
YMD
4. Press LCD/SET. You are prompted to confirm the
action.
5. Select Yes and press LCD/SET to complete the
action. Otherwise, select No.
28
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.5.3 Date/Time
Enables you to set the date and time.
1. In Manual, Auto, or Movie mode, press MENU/C.
Date/Time
2. Press
to navigate to the top of the menu, and
to select Setup mode
SD
SD
then press
.
YMD
3. Select Date/Time
.
YMD
Edit
4. Select Edit
and press LCD/SET.
•
•
Press macro
month, day, hour and minute fields.
Press zoom in and zoom out
the value for each field
and flash
to select the year,
to change
5. Press LCD/SET to save the setting and exit the date time submenu. To exit without saving
the settings, press MENU/C.
YMD
3.5.4 Date Format
Enables you to set the date format.
1. In Manual, Auto, or Movie mode, press MENU/C.
DateStyle
2. Press
to navigate to the top of the menu, and
to select Setup mode
SD
SD
then press
.
09 / 07 / 2018
YMD MDY DMY
3. Select Date Style. The following options are
available:
YMD
YMD
YY/MM/DD: year, month day
MDY
MM/DD/YY: month, day, year
DMY
DD/MM/YY: day, month, year
4. Press LCD/SET to save the setting and exit the date time submenu. To exit without saving
the settings, press MENU/C.
29
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
3.5.5 LCD Brightness
Enables you to set the LCD brightness.
1. In Manual, Auto, or Movie mode, press MENU/C.
LCDbright
2. Press
then press
3. Select LCD Brightness
to navigate to the top of the menu, and
SD
SD
to select Setup mode
.
09 / 07 / 2018
YMD
.
YMD
4. Press macro
brightness.
and flash
to raise and lower the
: brighter
: normal (default)
5. After you have made your selection, press MENU/C to exit the Setup menu.
3.5.6 Beep
Enables you to enable and disable the status beep
sound, which alerts you when the camera is turned on,
or a button is pressed.
Beep
On
NT
SC
Off
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press to navigate to the top of the menu, and
then press
Tv
z
z
On
to select Setup mode
.
.
English
3. Select Beep
4. Select Yes to enable the beep. Select No to disable it.
The default setting is No.
5. After you have made your selection, press MENU/C to exit the Setup menu.
Tv
3.5.7 Video Out Format
Enables you to set the video out format for connecting
the camera to your TV.
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press to navigate to the top of the menu, and
then press to select Setup mode
Videoout
On
NT
SC
PAL
Tv
.
z
z
On
English
3. Select Video Format
.
Tv
4. Select NTSC (default) or PAL.
5. After you have made your selection, press MENU/C
to exit the Setup menu.
30
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
z
z
3.5.8 Power Saving
Enables you to set the power saving mode.
1. In Manual, Auto, or Movie mode, press MENU/C.
PowerrSave
2. Press
to navigate to the top of the menu, and
to select Setup mode
On
NT
SC
then press
.
Tv
z
z
On
Off
3. Select PowerSave. The following options are
available.
English
On: when set to on, the camera enters sleep mode
in three minutes, and turns off after five minutes.
(default)
Off: disables power saving mode.
4. After you have made your selection, press MENU/C to exit the Setup menu.
3.5.9 Language
Enables you to set the display language.
1. In Manual, Auto, or Movie mode, press MENU/C.
Language
2. Press
to navigate to the top of the menu, and
to select Setup mode
On
NT
SC
then press
.
Tv
z
z
On
English
3. Press macro
and flash
to select the desired
Language. The following options are available.
•
•
•
•
•
•
•
•
English
French
German
Italian
Spanish
Portuguese
Traditional Chinese
Simple Chinese
4. After you have made your selection, press MENU/C to exit the Setup menu.
31
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
Reset
3.5.10 Reset
Enables you to reset the camera to factory defaults.
1. In Manual, Auto, or Movie mode, press MENU/C.
Reset
2. Press
press
to navigate to the top of the menu, and then
to select Setup mode
On
NT
SC
Tv
.
z
z
On
English
3. Select Reset
.
4. Press LCD/SET. You are prompted to confirm the
action. Select Yes.
5. Press LCD/SET. The camera’s settings are returned to the factory defaults.
6. Press MENU/C exit the Setup menu.
3.5.11 SW Version
Displays the camera’s SW version.
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press
to navigate to the top of the menu, and
to select Setup mode
Version
then press
.
V1023
3. Select Version. The version screen displays the
camera’s software version.
32
Using the DC S30
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
4
PC DEPENDENT FEATURES
To use the PC dependent functions, you need to install your digital camera software and
connect the camera to your PC.
4.1 Installing the Digital Camera Software
•
•
If your operating system is Windows 98SE, set up the DC S30 driver first. If the oper-
ating system is Windows ME/2000/XP, then it's not necessary for you to set up the
driver in advance.
It's recommended that you set up the driver and software before connecting the digi-
tal camera to your PC. Normally, a software installation menu appears automatically
after this installation CD is inserted into your CD-ROM drive. If the menu did not
appear, browse the CD and find a program file named “Autorun.exe” in the root
directory and double-click it. The menu will appear.
•
Click each item to install the software program of your choice.
To browse the content of this CD and install software manually, refer to the descriptions of
the CD content in the next section.
33
PC Dependent Features
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
4.2 Bundled Software
Software
PhotoBase
Description
Arcsoft PhotoBase enables you to efficiently find and
organize your media-files. Use it to create slide shows,
Web albums, or video postcards, and share your
media-files with your friends on the Internet.
PhotoImpression
ArcSoft PhotoImpression is an easy-to-use photo
editing and creative design program. Edit and
retouch your photos, then add special effects or place
them in cards, calendars, frames and fantasy
templates. PhotoImpression also includes a wide
variety of printing options.
VideoImpression
PhotoPrinter Pro.
Arcsoft Video Impression lets you edit and combine
video files. New videos can be created by existing
video, animation, and image files. Quickly and easily
create desktop video presentations for use at home,
business, or on the Internet.
Arcsoft Photo Printer is a versatile printing utility
that lets you print out several different images on a
single sheet of paper. It's as simple as opening your
image, selecting from an assortment of templates and
clicking Print.
Microsoft DirectX
Microsoft DirectX is an all-in-one and cross-platform
media tool.
Microsoft Media Player
Microsoft Media Player is a Windows utility that
plays audio, video, and streaming formats as well as
many other popular audio and video formats,
including MP3, CD audio, and MIDI files.
Acrobat reader
Q-link
Adobe Acrobat Reader is a “must have” utility to read
files in the popular cross-platform PDF file format.
BenQ Q-link is a utility for your smart photo
downloads, and has printout and edit functions.
Share via email with others, for photos folders
management and show slide show photos on screen.
Q-music
BenQ Q-Music lets you manage your music
selections, transfer MP3 files with your camera, create
and manage playlists, convert your CDs tracks into
MP3s, apply sound effects, and more.
34
PC Dependent Features
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
4.3 Transferring Files with your PC
This section explains how to transfer images, movies, and MP3 files with your PC using
Windows XP/ME/2000/98SE
4.3.1 Transferring Images, Movies, and MP3 Files
1. Turn on the PC.
2. Switch on the camera.
3. Connect the camera to the PC with the
included USB cable. Ensure that the
connection is secure.
When the USB cable is connected to the PC, a
hard disk is created in Windows Explorer
labeled “Removable Disk.”
Stored images or movies can be found in
Removable Disk\DCIM\100MEDIA.
MP3 files can be transferred to
Removable Disk\MP3
USB
4. Copy, view, delete, and move images, movies
and MP3 files using standard Windows
Explorer commands.
.
35
PC Dependent Features
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
4.4 Viewing Images on TV
1. Turn on the TV.
2. Switch on the camera.
AV
L
VIDEO
R
3. Connect the camera to the TV
with the included AV cable as
shown.
4. Switch your TV channel to the
proper video mode for viewing
video in media. Consult your TV
users manual.
5. Playback images or movies as
described in 3.3“Playing Back
Images” on page 21.
36
PC Dependent Features
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
5
TROUBLESHOOTING
5.1 Error Message Table
Symptoms
Causes
Solutions
The power won’t turn
on.
•
•
The battery is out of power.
The AC power adapter is not con-
nected or is damaged.
•
•
Use the AC power adapter to charge
the battery.
Make sure the AC power is con-
nected and it's not damaged.
The power turns off
during use.
•
•
•
The battery is out of power.
Auto power off is enabled.
The battery/SD card cover is opened
when in use.
The adapter has not been connected
properly.
•
Use the AC power adapter to charge
the battery.
Switch on the power.
Do not open the battery/SD card
cover when the camera is in use.
Connect the adapter correctly.
•
•
•
•
•
The battery power is
being used up too
quickly.
•
•
The external temperature is too cold.
The battery is not used for a long
time.
Keep the camera away from extreme
temperatures.
Recharge the battery with AC power
adapter.
•
The camera does not
take pictures when the
shutter button is
pressed.
•
The camera is not set at Recording
Mode.
The battery is weak.
The power has not been switched
on.
•
•
•
Set the Mode Dial to Capture Mode.
Replace the battery.
Switch on the power.
•
•
The close-up image is
blurred.
•
Select the correct focus range.
•
•
•
If the subject is within 15 cm, select
Macro mode.
The flash does not fire.
•
•
The camera flash is turned off.
The light source is sufficient.
Set the flash mode to Auto Flash or
Forced Flash mode.
There is something
wrong with the color of
the captured image.
•
White balance is not set properly.
Set the white balance to Auto mode
or other suitable mode.
The picture is too bright
or too dark.
•
•
There is excessive or inadequate
exposure.
•
•
Reset exposure compensation.
You should clean the LCD cover.
The LCD monitor is not
clear.
The LCD monitor plastic cover is
dirty.
The camera cannot
download images to the
PC.
•
•
•
Cable is not connected properly.
Camera is off.
There are no battery or the adapter
is not well connected.
OS is not Window 98SE
/2000/ME/XP or PC is not equipped
with USB port.
•
•
•
Check the cable connection.
Turn on the power.
Load new battery or check the AC
power adapter connection.
Install Windows 98SE/2000/ME/XP
and USB Port.
•
•
•
•
Install USB Driver.
USB driver is not installed.
37
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
5
SPECIFICATIONS
Image Sensor
Lens
1/2.7-inch CCD with 3.34 Megapixels
f=35-104 mm (film equivalent)
F2.8 / F4.8
Digital Zoom
Capture Mode:4x (continuous)&
Play Mode:4x (continuous)
Viewfinder
LCD Monitor
Focusing
Optical real image viewfinder
1.5-inch color LTPS LCD
TTL Auto Focus
Focusing Range
Shutter
Macro: 15 cm, Normal: 50 cm-infinity
Mechanical shutter and Electrical shutter
1/30 ~ 1/1000 sec. Mechanical shutter
Shutter Speed
Exposure
Center-weighted Average, Spot, Matrix
Exposure compensation +2 EV (0.3 EV / step)
ISO Equivalent
White Balance
Flash
Auto, 100, 200, 400
Auto / Daylight / Cloudy / Tungsten / Fluorescent
Auto / Red - eye reduction / Forced Flash / Flash off
0.5 ~ 2.5m
Flash Range
Still Image Mode
Single image / Continuous (3 pic) / Self-timer (10 seconds
with LED indicator)
Movie Clips
Storage
Size: 320x240with sound
Recording time: depending on memory
Built-in memory: 14 MB
External memory: SD Card (8~256 MB) compatible.
File Format
Image size
Still Image: JPEG (EXIF 2.2), DCF, PIM
Movie Clip: ASF format
2848 x 2160 pixels, 2048 x 1536 pixels
1600 x 1200 pixels, 1280 x 960 pixels
Image Play
Interface
Single image / ASF play / Thumbnails / Slide show
Digital output connector: USB 1.1
AV output
DC power input connector: 5V
Power Source
Specific rechargeable Lithium-ion battery / AC adapter /
USB cable
Dimensions
(WxHxD)
96 x 63 x 40 mm
Weight
180g (without battery)
38
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
Camera Driver
PC Driver (Windows 98SE / 2000 /ME / XP)
Software Application
Q-link
Q-music
PhotoBase
PhotoImpression
VideoImpression
PhotoPrinter
Acrobat Reader
DirectX
Media Player
System Requirements
FOR WINDOWS
Pentium MMX class or higher CPU
64 MB RAM
CD-ROM drive
100 MB free hard disk space
Available USB port
Windows XP/ME/2000/98SE
39
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
BenQ DC 5530 User’s Manual
5
SERVICE INFORMATION
Technical Suppor t
If you encountered problems using DC S30 and the camera driver program, please send an E-mail
(containing detailed descriptions of the problem you came upon, the hardware and software
environment of your system) to the following addresses:
USA: [email protected]
Europe: [email protected]
Taiwan: [email protected]
China: [email protected]
Asia and other countries: [email protected]
For free driver program updates, product information and news release, please visit the
following web address:
40
Service information
Download from Www.Somanuals.com. All Manuals Search And Download.
|