Belkin Switch F5D4071 User Manual

Powerline Turbo  
Ethernet Adapter  
User Manual  
F5D4071  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
1
2
3
4
Thank you for purchasing the Powerline Turbo Ethernet Adapter (the  
Adapter). Most people don’t enjoy buying long and expensive Ethernet  
cables or pulling the cables from one place to another, but the Adapter  
offers one of the easiest ways to enjoy home or small-business  
networking. Users can now experience a total network solution with  
the Adapter. The Powerline Turbo Ethernet Adapter operates on the  
®
HomePlug Powerline Specification 1.0 Turbo standard, providing up to  
85Mbps* bandwidth over home AC wiring. Since the home power lines  
are the most pervasive medium in households with multiple outlets in  
every room, the Adapter allows multiple home desktop and notebook  
computers to be networked to share an Internet connection, printers,  
and files, and play games without any additional wiring.  
The installation of the Adapter only requires that a 10/100Mbps  
network adapter is installed on the computers. This makes the  
Powerline Turbo Ethernet Adapter compatible with any device,  
including Mac, Windows, and UNIX machines.  
For security, all HomePlug devices are equipped with 56-bit DES  
encryption. The private home power grid plus encryption makes  
HomePlug significantly more secure than competing technologies.  
The Powerline Turbo Ethernet Adapter provides the best solution for  
no-new-wires home networking. With easy plug-and-play installation,  
and the reliability of HomePlug Ethernet’s products, the Powerline  
Turbo Ethernet Adapter is the best solution for high-speed networking.  
Features  
• Up to 85Mbps* bandwidth over standard home power lines  
• Estimated range of 300m in wall power lines  
• HomePlug signal easily passes through circuit breaker  
• 56-bit DES encryption ensures data security  
• Encryption completed by hardware, without sacrifice to bandwidth  
• Uses IEEE 802.3 computer interface  
• Plug-and-play installation  
• HomePlug Powerline Specification 1.0 Turbo-compliant  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Introduction  
Product Specifications  
Computer Interface: IEEE 802.3/802.3u  
Operating Temperature: 32–104 degrees F (0–40 degrees C)  
Storage Temperature: -4–176 degrees F (-20–80 degrees C)  
Humidity: Max. 5%–90% (non-condensing)  
Typical Operating Range: Up to 300m in wall power lines  
*The standard transmission rate—85Mbps—is the physical data rate.  
Actual data throughput will be lower.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Introduction  
1
2
3
4
Powerline Link LED  
®
On  
Blinking  
Another HomePlug unit detected  
Powerline network activity  
Ethernet Link LED  
On  
Connected to Ethernet  
Blinking  
Ethernet network activity  
System Requirements  
At least 2 HomePlug devices  
Available Ethernet port on each computer or network  
Available power outlet  
Standard home powerline wiring  
CD-ROM drive  
Package Contents  
Two Powerline Turbo Ethernet Adapters  
HomePlug Quick Installation Guide  
HomePlug User Manual (on CD)  
Installation CD  
Limited Warranty Card  
Two Power Cables  
Two CAT5/RJ45 Ethernet Cables  
Two Wall Plug Adapters  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Installing and Setting Up the Adapters  
Overview  
Installation of the Powerline Turbo Ethernet Adapter takes only minutes  
and does not require setting up long wires throughout the house. Simply  
install the included software CD and after installation, physically plug  
the unit into the computer and the wall outlet. Users have the option to  
adjust security functions and the network platform once installation  
is complete.  
Running the InstallShield Wizard  
1. Insert the CD into your CD-ROM drive and wait for the setup screen  
to appear. If the CD-ROM does not automatically run the CD, click on  
“Start” in the bottom left corner of your screen (for most Microsoft  
Windows operating systems) and go to “Run”. Type in: “(CD Drive  
Letter):\eth\setup.exe” and click “OK”.  
2. Once the software loads, the following dialog box will appear:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Installing and Setting Up the Adapters  
1
2
3
4
3. Click “Next” to continue the installation:  
4.Please enter the user name and organization information. The “Install this  
application for” option is applicable to circumstances in which multiple  
logins are applied. For example, if you only want to allow yourself access to  
that particular account, then select “Only for me”. If you don’t have multiple  
accounts or you want to allow all users to access the utility, choose “Anyone  
who uses this computer (all users)”. Then, click “Next” to continue.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Installing and Setting Up the Adapters  
This section allows you to change the default directory where the program is  
installed. If you don’t want to change the directory, click “Next” to continue the  
installation process.  
5. This section allows you to go back to change the settings or to install the  
utility. If you wish to change the previous options, click “Back”. If not, click  
the “Install” button.  
6. Installation is complete. Click “Finish” to exit the wizard. Refer to the  
following diagrams to set up your hardware connections.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Installing and Setting Up the Adapters  
1
2
3
4
Hardware Setup  
1. Plug your network cable into the computer’s RJ45 network adapter port.  
2. Plug the other end of your network cable into the RJ45 port located at  
the back of the Adapter. re Setup  
3. Plug the power cable into the power connector at the back of  
the Adapter.  
4. Plug the power plug of your power cable directly into a power outlet in  
the wall.  
NOTE: Do not plug the device into a UPS or power strip with surge protection.  
The Adapter has its own power filter for protection against surges.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Configuration  
Overview  
The Adapter uses 56-bit DES encryption to block access from the outside. The  
key is set by using the HomePlug Configuration Utility on the CD. By default, the  
protection is enabled. However, it is recommended that you change the default  
network password. All your HomePlug devices must use the same network password  
in order for the computers to be networked. Make sure that all devices are loaded  
with the same network password.  
Diagnose Powerline Network  
Part 1: Diagnose a Local HomePlug Device  
Double-click the “Belkin HomePlug Utility” icon on your desktop to open  
the utility shown in the screen below.  
The “Main” tab shows the HomePlug units that are connected to the current  
computer and other devices on the network. It also tells you the MAC address of  
each device. It lets you refresh the window, if you change devices, and also allows  
you to connect to different networks if multiple units are connected to  
your computer.  
Note: If the link quality is poor, and appears red, or the MAC address of any of  
the units connected to this computer appears to be all 0s, then you may have a  
defective unit. Please contact technical support.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Configuration  
1
2
3
4
Note: If you do not see ANY units in the device status, and there is a device  
connected to your computer, try unplugging and re-plugging all devices. Also  
make sure that the cable connecting your computer to the HomePlug device is  
the right type and is working correctly. If everything seems to be correct, and  
you do not see anything in the “Device” window, try rebooting your computer. If  
the problem still persists, please contact technical support.  
Part 2: Diagnose a Network HomePlug Device  
The “Main” tab shows all the other HomePlug units on your powerline network.  
It represents them by MAC address, and also shows the available bandwidth to  
each unit (units farther away from the current computer might have a lower data  
rate). If you add or subtract units from your home network, you might want to  
re-scan, by clicking the “Scan” button. This will re-scan the network and refresh  
with any changes.  
Note: Only units with the same network password will appear; please verify  
that they all have the same network password (case-sensitive).  
Note: If a unit shows a MAC address of all 0s, this unit may not have a solid  
connection, or may not connect at all. If this is the case, please contact  
technical support.  
Note: If there are units in your home that do not appear in this network scan,  
unplug and re-plug all devices (only do this with the units that do not appear in  
the network screen). If the problem persists, move the unit closer to this current  
unit (adjacent plugs in the same wall socket is preferred). If the problem still  
persists and that unit still does not appear on the network, then the unit may be  
defective and you will need to contact technical support. Otherwise, if you view  
the unit working, distance might be the only issue.  
The networked HomePlug devices can be renamed by selecting the device and  
clicking “Rename”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Configuration  
Setting Up Security on a Local HomePlug Device  
The “Privacy” tab allows you to change the network password to the unit that is  
currently connected to this computer. This network password encrypts all data  
that is sent from this unit using 56-bit data encryption standard (DES). The DES  
encryption is very secure and difficult to crack.  
Note: Every unit on your home network MUST have the same network  
password in order for connectivity to be established throughout your home.  
The default network password is “HomePlug”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Configuration  
1
2
3
4
Setting Up Security on a Network HomePlug Device  
1. The “Privacy” tab allows users to use one primary computer to control the  
network password of all units on the home network.  
2. You will have to go back to the “Main” tab first to enter the DEK (Device  
Encryption Key) for each networked HomePlug device. Select the device and  
click “Enter Password”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Configuration  
3. In the following window, enter the DEK located on the bottom of each device into  
the “Password” field.  
4. You can change the password for all networked devices from one computer using  
this utility, instead of changing the password individually.  
Note: The DEK is unique for EACH HomePlug device. To use this utility, you  
will need to input the DEK for each unit.  
5. The network password can be changed on all devices on which DEKs have been  
entered. On the “Privacy” tab, simply change the private network name (network  
password) and click “Set all devices”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Configuration  
1
2
3
4
Diagnostics  
This page provides diagnostics information for your HomePlug network. It also  
allows you to create, email, and print a report of this information.  
Technical Support  
please call:  
US: 877-736-5771  
800-223-5546 ext. 2263  
310-898-1100 ext. 2263  
UK: 0845 607 77 87  
Australia: 1800 235 546  
New Zealand: 0800 235 546  
Singapore: 65 64857620  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Information  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, Belkin International, Inc., of 501 West Walnut  
Street, Compton, CA 90220, declare under our sole  
responsibility that the product,  
F5D4071  
to which this declaration relates,  
complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device  
may not cause harmful interference, and (2) this device  
must accept any interference received, including  
interference that may cause undesired operation.  
Caution: Exposure to Radio Frequency Radiation.  
The radiated output power of this device is far below the FCC radio frequency  
exposure limits. Nevertheless, the device shall be used in such a manner that the  
potential for human contact during normal operation is minimized.  
When connecting an external antenna to the device, the antenna shall be placed in  
such a manner to minimize the potential for human contact during normal operation.  
In order to avoid the possibility of exceeding the FCC radio frequency exposure  
limits, human proximity to the antenna shall not be less than 20cm (8 inches) during  
normal operation.  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation.  
This equipment generates, uses, and can radiate radio frequency energy. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to  
try and correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the distance between the equipment and the receiver.  
• Connect the equipment to an outlet on a circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Information  
1
2
3
4
Modifications  
The FCC requires the user to be notified that any changes or modifications to this  
device that are not expressly approved by Belkin International, Inc., may void the  
user’s authority to operate the equipment.  
Europe – EU Declaration of Conformity  
This device complies with the essential requirements of the R&TTE Directive  
1999/5/EC. The following test methods have been applied in order to prove  
presumption of conformity with the essential requirements of the R&TTE Directive  
1999/5/EC:  
-
EN60950-1:2001 A11:2004  
Safety of Information Technology Equipment  
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě  
se základními požadavky a dalšími příslušnými ustanoveními směrnice  
1999/5/ES.  
Česky [Czech]  
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr  
Dansk [Danish] [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige  
relevante krav i direktiv 1999/5/EF.  
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp]  
Deutsch  
in Übereinstimmung mit den grundlegenden Anforderungen und den  
[German]  
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.  
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme  
[seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ  
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele  
Eesti [Estonian]  
sätetele.  
Hereby, [name of manufacturer], declares that this [type of equipment]  
is in compliance with the essential requirements and other relevant  
provisions of Directive 1999/5/EC.  
English  
Por medio de la presente [nombre del fabricante] declara que el [clase  
de equipo] cumple con los requisitos esenciales y cualesquiera otras  
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.  
Español  
[Spanish]  
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ  
[type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ  
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ  
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.  
Ελληνική  
[Greek]  
Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil]  
est conforme aux exigences essentielles et aux autres dispositions  
pertinentes de la directive 1999/5/CE.  
Français  
[French]  
Con la presente [nome del costruttore] dichiara che questo [tipo di  
Italiano [Italian] apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni  
pertinenti stabilite dalla direttiva 1999/5/CE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Information  
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type  
of equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām  
prasībām un citiem ar to saistītajiem noteikumiem.  
Latviski  
[Latvian]  
Lietuvių  
[Lithuanian]  
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka  
esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.  
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel]  
in overeenstemming is met de essentiële eisen en de andere relevante  
bepalingen van richtlijn 1999/5/EG.  
Nederlands  
[Dutch]  
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott]  
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li  
hemm fid-Dirrettiva 1999/5/EC.  
Malti [Maltese]  
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a  
vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb  
elõírásainak.  
Magyar  
[Hungarian]  
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest  
zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi  
postanowieniami Dyrektywy 1999/5/EC.  
Polski [Polish]  
[Nome do fabricante] declara que este [tipo de equipamento] está  
conforme com os requisitos essenciais e outras disposições da Directiva  
1999/5/CE.  
Português  
[Portuguese]  
Slovensko  
[Slovenian]  
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi  
zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.  
Slovensky  
[Slovak]  
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné  
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.  
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment  
= laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY  
oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen  
mukainen.  
Suomi [Finnish]  
Härmed intygar [företag] att denna [utrustningstyp] står I  
överensstämmelse med de väsentliga egenskapskrav och övriga  
relevanta bestämmelser som framgår av direktiv 1999/5/EG.  
Svenska  
[Swedish]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Information  
1
2
3
4
Belkin International, Inc., Limited Lifetime Product Warranty  
What this warranty covers.  
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin  
product that the product shall be free of defects in design, assembly, material,  
or workmanship.  
What the period of coverage is.  
Belkin warrants the Belkin product for the lifetime of the product.  
What will we do to correct problems?  
Product Warranty.  
Belkin will repair or replace, at its option, any defective product free of charge  
(except for shipping charges for the product).  
What is not covered by this warranty?  
All above warranties are null and void if the Belkin product is not provided to  
Belkin for inspection upon Belkin’s request at the sole expense of the purchaser,  
or if Belkin determines that the Belkin product has been improperly installed,  
altered in any way, or tampered with. The Belkin Product Warranty does not  
protect against acts of God such as flood, lightning, earthquake, war, vandalism,  
theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage  
due to low voltage disturbances (i.e. brownouts or sags), non-authorized program,  
or system equipment modification or alteration.  
How to get service.  
To get service for your Belkin product you must take the following steps:  
1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA  
90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the  
Occurrence. Be prepared to provide the following information:  
a. The part number of the Belkin product.  
b. Where you purchased the product.  
c. When you purchased the product.  
d. Copy of original receipt.  
2. Your Belkin Customer Service Representative will then instruct you on how to  
forward your receipt and Belkin product and how to proceed with your claim.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Information  
Belkin reserves the right to review the damaged Belkin product. All costs of shipping  
the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If  
Belkin determines, in its sole discretion, that it is impractical to ship the damaged  
equipment to Belkin, Belkin may designate, in its sole discretion, an equipment  
repair facility to inspect and estimate the cost to repair such equipment. The  
cost, if any, of shipping the equipment to and from such repair facility and of such  
estimate shall be borne solely by the purchaser. Damaged equipment must remain  
available for inspection until the claim is finalized. Whenever claims are settled,  
Belkin reserves the right to be subrogated under any existing insurance policies the  
purchaser may have.  
How state law relates to the warranty.  
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE  
NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW,  
IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY,  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH  
IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF  
THIS WARRANTY.  
Some states do not allow limitations on how long an implied warranty lasts, so the  
above limitations may not apply to you.  
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT,  
INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT  
LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE  
OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
This warranty gives you specific legal rights, and you may also have other rights,  
which may vary from state to state. Some states do not allow the exclusion or  
limitation of incidental, consequential, or other damages, so the above limitations  
may not apply to you.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Information  
1
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Powerline Turbo  
Ethernet Adapter  
Belkin Tech Support  
Belkin Ltd.  
US: 877-736-5771  
4 Pioneer Avenue  
800-223-5546 ext. 2263  
310-898-1100 ext. 2263  
UK: 0845 607 77 87  
Australia: 1800 235 546  
New Zealand: 0800 235 546  
Singapore: 65 64857620  
Tuggerah Business Park  
Tuggerah, NSW 2259, Australia  
+61 (0) 2 4350 4600  
+61 (0) 2 4350 4700 fax  
Belkin B.V.  
Boeing Avenue 333  
1119 PH Schiphol-Rijk, The Netherlands  
+31 (0) 20 654 7300  
+31 (0) 20 654 7349 fax  
Belkin International, Inc.  
501 West Walnut Street  
Los Angeles, CA 90220, USA  
310-898-1100  
310-898-1111 fax  
Belkin Ltd.  
Express Business Park, Shipton Way  
Rushden, NN10 6GL, United Kingdom  
+44 (0) 1933 35 2000  
+44 (0) 1933 31 2000 fax  
© 2007 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective  
manufacturers listed. Windows and Windows Vista are either registered trademarks or trademarks of  
Microsoft Corporation in the United States and/or other countries.  
P75595  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Network Card F5U104 User Manual
Black Box Computer Accessories BLACK BOX CAT5 5e 6 LAN Performance Verifier User Manual
Bowers Wilkins Speaker CWM LCR8 User Manual
Braun Lawn Mower 5316 User Manual
Cambex Network Card Bus Adapter User Manual
Canon Switch M15 155 User Manual
Carrier Portable Generator ASPASICCA007 User Manual
Casio Digital Camera EX Z37 User Manual
Casio Electronic Keyboard PX 860 User Manual
CFM Corporation Indoor Fireplace ICVCEFP01 User Manual