Canon Switch M15 155 User Manual

Avaya  
Installation Guide  
M15-155  
ATM SWITCHING MODULES  
FOR THE AVAYA M770  
Catalog No. 130030 Rev. F. July, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Overview  
This installation guide is divided into the following main sections:  
Overview: A general description of the Avaya M15-155F, M15-155SF and  
M15 155MS modules, including interfaces, LED indicators, a front panel  
illustration and a list of hardware features.  
Installation: Step-by-step instructions for installing the M15-155 in an  
Avaya M770 ATM switch.  
Troubleshooting: Suggested solutions for commonly encountered problems.  
Appendix: Port connector pin assignments.  
Note: The Command Line Interface (CLI) software setup and control of the  
Avaya M770 ATM modules is described in the Avaya M770 ATM Switch User’s  
Guide.  
Description  
There are three 15-port ATM OC-3 modules for the Avaya M770 Multifunction  
switch: the M15-155F Multi-Mode Fiber (MMF) module, the M15-155SF Single-  
Mode Fiber (SMF) module and the combined M15-155MS module which has 2  
Single-Mode and 13 Multi-Mode ports. They provide connection for OC-3 ATM  
servers and end stations and act as a backbone between switches.  
The M15-155 modules and other M770 ATM switching modules comprise a fully  
functional ATM switch within the Avaya M770 Multifunction chassis. There is no  
need for a central ATM switching or processing module. The only central module  
required is the M-SPV/M-SPX/M-SPS Supervisor module (one or two for  
redundancy) for clock generation for all the Avaya M770 ATM modules.  
The M770 ATM switch is a high-performance distributed Asynchronous Transfer  
Mode (ATM) switch that is designed for building campus backbone applications,  
high-performance centralized servers, and power-user environments. Its advanced  
architecture can support very high traffic loads with no data loss or breaks in  
communication. The M770 ATM Switch also implements LAN Emulation (LANE)  
components. LANE enables legacy LAN applications to use a transparent ATM  
transport medium. In this way, end-stations on existing LANs can communicate  
with ATM end-stations.  
The Avaya M770 supports a range of ATM switching modules that enable you to  
customize the switch for different applications in your network. The M770 ATM  
switch is designed as a software-upgradeable product, so that you can expand the  
functionality of the switch by downloading new software.  
The M15-155 is manageable with CajunView™, Avaya’s family of SNMP network  
management systems, or any other SNMP-based management system.  
M15-155 Installation Guide  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Overview  
Features  
Note: For Software Features please refer to the Avaya M770 ATM Switch User’s  
Guide.  
M15-155F — 15 ATM OC-3 Multi-Mode Fiber (MMF) ports with SC connectors  
(3 m to 2000 m cable lengths)  
M15-155SF — 15 ATM OC-3 Single-Mode Fiber (SMF) ports with SC connectors  
(3 m to 15 km cable lengths)  
M15-155MS — 2 ATM OC-3 Single-Mode Fiber ports with (SMF – 3 m to 15 km  
cable lengths) and 13 Multi-Mode Fiber ports (MMF – 3 m to 2000 m cable  
lengths) with SC connectors.  
32K cells output buffers  
16K cells input buffers  
Low Cell Transfer Delay through the switch is 20 µsec (in port to out port)  
Low Cell Variation Delay through the switch is 5 µsec (in port to out port)  
Clock Generation /Clock Propagation of clock to all other ports  
Supports CBR, VBR-rt, VBR-nrt, ABR, UBR Classes of Service  
Supports AAL1, AAL2, AAL3/4 and AAL5 classes  
Cell Loss Priority (CLP) discard  
Early Packet Discard (EPD) and Partial Packet Discard (PPD) for AAL5  
ABR with EFCI Tagging  
Hot swapping of modules  
Line Indication – Loss of Signal (LOS), Remote Defect Indicator (RDI), Transmit  
and Receive traffic  
32K Virtual Channels per port and 120K Virtual Channels per module. The  
Software version may limit the number of the VCs currently supported.  
LANE servers: LECS, BUS, LES, on each module. LEC on elected module.  
Idt R4650 (100 MIPS) RISC processor, 32 Mbyte RAM and 4 Mbyte Flash on  
EACH module for fast call set up and protocol processing.  
2
M15-155 Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                             
                                                
Chapter 1  
Overview  
Front Panel Components  
Table 1  
M15-155 Front Panel Diagnostic LEDs  
LED  
Description  
State  
Meaning  
Indicator  
OPR  
Module  
ON  
Module is OK  
Operational  
Status  
OFF  
Blink  
Module is not operational  
Module Fault  
BIT  
Built-In Test  
ON  
BIT in progress  
OFF  
BIT not in progress  
NMA  
Network  
Management  
Agent  
ON  
This module is the Master Agent  
OFF  
Not currently the Master Agent  
ETM  
For future  
use  
SRV  
For future  
use  
Function LED*  
Port LED (1 … 15, CPU)  
LNK  
Port Status  
ON  
Port is enabled and Link OK  
(default)  
OFF  
Port is disabled  
1 Blink  
Link failure (LOS or RDI)  
Tx  
Transmit to  
line  
ON  
OFF  
Data transmitted to line  
No activity on port  
Rx  
Receive from  
line  
ON  
OFF  
Data received from line  
No activity on port  
LOS  
RDI  
Loss of Signal ON  
OFF  
Loss of Signal State  
No LOS  
Remote  
Defect  
ON  
OFF  
Remote defect (RDI) detected  
No RDI  
Indicator  
* Use the 34pushbuttons on the front panel to select the  
Function to be displayed on the Port LEDs.  
Table 2  
M15-155 Front Panel Ports  
Function  
Port/Connector  
Ports 1 and 2  
M15-155F – ATM OC-3 MMF ports  
M15-155SF and M15-155MS – ATM OC-3 SMF ports  
Ports 3 … 15  
M15-155F and M15-155MS – ATM OC-3 MMF ports  
M15-155SF – ATM OC-3 SMF ports  
Console  
Terminal setup of M15-155  
Connector  
M15-155 Installation Guide  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                                       
                                                          
                                                              
                                                                 
Chapter 1  
Overview  
Resetting the Module  
To reset the module, press both the 34 pushbuttons simultaneously and hold  
for about 2 seconds, until all LEDs light ON.  
Entering Boot Loader Program  
To enter Boot Loader Mode, press both the 34 pushbuttons simultaneously  
and hold until the OPR LED switches OFF (about 4 seconds).  
4
M15-155 Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Installation  
Installation Overview  
There are several stages involved in the installation of the M15-155:  
Module Installation: Inserting the module in the Avaya M770 chassis and  
connecting cables to the module’s ports for connection to other equipment such  
as a switch or station.  
Command Line Interface (CLI): Connecting a terminal to the local console to  
access the CLI and configuring all parameters. The CLI commands and the  
explanation of how to configure the switch are described in the Avaya M770  
ATM Switch User’s Guide.  
Caution: The M15-155 contains components sensitive to electrostatic discharge.  
To prevent ESD damage, always hold the card by its sides only, and do not touch  
the circuit board components unless instructed to do so.  
Before handling the module or inserting it in the hub, touch the chassis of the hub  
to discharge any electrostatic charge on your body.  
Note: The recommended Avaya M770 configuration is two M-PS800 units, plus a  
third unit for redundancy. Such a configuration supports any number of ATM,  
DomainX and Avaya M400 Gate Switch Modules in the chassis.  
One M-PS800 supports 7 M15-155 modules.  
One M-PS500 supports 4 M15-155 modules.  
Three M-PS500 support up to 12 M15-155 modules with no power supply  
redundancy.  
Laser Safety  
The M15-155SF Single-Mode transceiver module and the two M15-155MS Single-  
Mode transceiver ports are Class 1 Laser devices. They comply with IEC 825-1 and  
Food and Drug Administration (FDA) 21 CFR 1040.10 and 1040.11.  
The transceivers must be operated under recommended operating conditions.  
CLASS 1  
LASER PRODUCT  
M15-155 Installation Guide  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Installation  
Laser Classification  
Note: Class 1 lasers are inherently safe under reasonably foreseeable  
conditions of operation.  
Caution: The use of optical instruments with this product will increase eye hazard.  
Usage Restriction  
The optical ports of the module must be terminated with an optical connector or a  
dust plug when not in use.  
Laser Data  
Wavelength: 1300 nm  
Single-Mode Ports:  
Transmit power (M15-155SF, M15-155MS SM ports, 9 µm SMF):  
Minimum -15 dbm, Maximum -8 dbm  
Receive power (M15-155SF, M15-155MS SM ports, 9 µm SMF):  
Minimum -30 dbm, Maximum -8 dbm  
Multi-Mode Ports:  
Transmit power (M15-155F, M15-155MS MM ports, 62.5 µm and 50 µm MMF):  
Minimum -20 dbm, Maximum -14 dbm  
Receive power (M15-155F, M15-155MS MM ports, 62.5 µm and 50 µm MMF):  
Minimum -31 dbm, Maximum -14 dbm  
Installing the Module  
The M15-155 modules occupy one slot in the Avaya M770 chassis and can be  
inserted into any available position. The Avaya M770 chassis ATM Backplane is  
available in two versions: a single-domain or a dual domain ATM Backplane. If  
you have the dual-domain version note that slots 1 to 7 and slots 8 to 14 in the  
chassis function as two separate, unconnected ATM switching domains. Therefore,  
if you intend to use several ATM modules as a single switch they should be on the  
same side of the Avaya M770 chassis.  
The M15-155 can be installed or removed while power is on.  
To install the M15-155:  
Hold the module (shaped like an upside down L) using both hands. The  
colored module name panel and LEDs should be on top (see Figure 3).  
Fold out the plastic handles on the top and bottom of the front panel.  
6
M15-155 Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Installation  
While holding the module by its handles, place it onto the top and bottom  
guide rails in the chassis and gently slide it in by pressing in the middle of the  
module. The module should slide in smoothly.  
Caution: Ensure that the metal edges of the card (not the PCB) are aligned with the  
guide rails. Align the bottom edge first and then the top edge since the module  
slots in the bottom rail before the top rail.  
Plug in the module by pressing firmly on the mid-section of the front panel.  
Fold down the handles and secure the module using the two screws at the top  
and bottom of the front panel. Do not over-tighten the screws.  
Note: Even though the modules are hot-swappable, a self initialization period is  
required when inserting them into the chassis. Allow about 30 seconds  
initialization time after inserting the module for self testing and decompression of  
code from Flash to RAM. If the local LECS is in Resilient mode then it will take 2  
minutes for the LANE to function (see the Avaya M770 ATM Switch User’s  
Guide).  
Figure 3  
Inserting the Module into the Chassis  
ATM  
Motherboard  
Upper Guide  
Rails  
DomainX or  
ATM Module  
Plastic  
Handle  
A
Multifunction Switch  
vaya M770  
Module  
Name and  
LEDs Panel  
Plastic  
Handle  
DomainX  
Motherboard  
Lower Guide  
Rails  
M15-155 Installation Guide  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Installation  
Power-on Check  
When you plug in the M15-155, wait until first the CPU LED lights and then the  
OPR lights steadily before commencing work. If there are several M15-155  
modules, one module will be elected as the Master Agent, and the NMA LED on  
that module will also light ON. For a detailed explanation of the Master Agent  
please refer to the Avaya M770 ATM Switch User’s Guide.  
Connecting the Console Terminal  
Initial software configuration of the M15-155 is done using a console terminal  
connected to the Console connector on the front panel of the module. See the  
Appendix for connector pin assignments.  
To connect the M15-155 to a console terminal:  
1. Turn on the VT100 terminal (or PC terminal emulator in VT100 or VT52 mode)  
and set its communication parameters to:  
Baud rate:  
Start bit:  
Data bits:  
Stop bit:  
Parity:  
9600 bps  
1
8
1
None  
Refer to your terminal’s user manual for instructions on how to set these  
parameters.  
2. Insert the RJ-45 connector of the cable into the Console port on the M15-155  
front panel (see Table 3 for connector pinout).  
3. Insert the other end of the cable into the terminal’s RS-232 port.  
4. Press <Enter> to verify that the cabling process was successful. The system  
prompt appears (M770sXX:/>).  
5. The CLI commands and the explanation of how to configure the switch are  
described in the Avaya M770 ATM Switch User’s Guide.  
8
M15-155 Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
Troubleshooting  
Use the table below to troubleshoot common problems. If you still experience  
problems, please contact Avaya Communication Technical Support.  
Problem  
Probable Cause  
Solution  
BIT LED remains ON  
after power up or reset  
Module self-test failed  
i) Check that the module is  
correctly and fully inserted into  
the M770 ATM switch chassis  
ii) Reboot or power-up again  
Reboot or power-up again  
All LEDs remain ON  
after power up or reset  
Module fault  
Link failure  
Port LED blinks while  
function LED is on  
LNK  
Check the fiber connection to the  
port  
OPR LED does not  
light ON after reboot  
(after more than 30  
seconds)  
The module may be in  
Monitor mode because  
of a Long Reset  
Reset the module again but this  
time make a Short Reset (less than 4  
seconds)  
M15-155 Installation Guide  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
Troubleshooting  
Software Download Troubleshooting  
The following are Activity Status messages that can appear during software  
download, their meanings, and suggested solutions.  
Activity Status  
message  
Description  
Suggested action  
File format unknown  
File format  
unknown  
Ensure that the correct agent software file  
is being downloaded to the agent  
File not found  
Failure of TFTP  
Get  
Type in the correct path and filename  
Server is unreachable  
or  
Server timeout  
Failed to find the  
server after 1  
minute  
Check that you typed in the correct TFTP  
Server IP address. Ensure the server is  
accessible to the agent by typing  
ip ping <ip_address_of_agent>.  
The router is defined in the IP Gateway  
menu.  
To many Boot Images  
in Flash  
Erase one of the Boot Images from Flash  
memory  
To many Main Images  
in Flash  
Erase one of the Software Version from  
Flash memory  
Access Violation  
You do not have  
the required  
You must obtain the required access  
permission  
access permission  
10  
M15-155 Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Connector Pin Assignments  
The following table shows the wiring connection to the Terminal port of the  
M15-155 module.  
Table 3  
M15-155 Terminal Port Wiring Connections  
DCE  
Name  
DTE  
DTE  
RJ-45 PINS  
DB-25 PINS  
DB-9 PINS  
1
2
3
4
5
6
7
8
no connection  
TXD  
3
2
3
1
5
RCV  
2
DTR  
20  
7
GND  
no connection  
CTS  
4
5
7
8
RTS  
M15-155 Installation Guide  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
avaya.com  
CajunView is a trademark, and in some jurisdictions may be a registered trademark of Avaya Inc. or its affiliated companies.  
Other trademarks appearing in this document are the property of their respective owners.  
Copyright © 2001, Avaya Inc. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bionaire Humidifier BCM7205 User Manual
Black Decker Juicer BDPRJE600 AR User Manual
Bosch Power Tools Drill 0601916460 User Manual
Briggs Stratton Lawn Mower BTXPV22725 User Manual
Butler Audio Stereo Amplifier TDB 3150 User Manual
Canon Camera Flash 155 A User Manual
Carrier Air Conditioner 38BRC User Manual
Chamberlain Garage Door Opener 3245M 1 3 HP User Manual
CH Tech Network Card M223 User Manual
Cisco Systems IP Phone 7906 7911G User Manual