BB Electronics Network Card 232HSPCC User Manual

Not Recommended for New Installations.  
Please contact Technical Support for more information.  
PCMCIA High Speed Serial Card CE  
Model 232HSPCC  
Documentation Number 232HSPCC1199  
International Headquarters  
B&B Electronics Mfg. Co. Inc.  
707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 USA  
Phone (815) 433-5100 -- General Fax (815) 433-5105  
Home Page: www.bb-elec.com  
Sales e-mail: orders -- Fax (815) 433-5109  
Technical Support e-mail: [email protected] -- Fax (815) 433-5104  
European Headquarters  
B&B Electronics Ltd.  
Westlink Commercial Park, Oranmore, Co. Galway, Ireland  
Phone (353) 91 792444 -- Fax (353) 91 792445  
Sales e-mail: [email protected]  
Technical Support e-mail: [email protected]  
February 1999 -- B&B Electronics  
November 1995 B&B Electronics RESERVED. No part of this publication may be reproduced or transmitted  
in any form or by any means, electronic or mechanical, including photography, recording, or any information  
storage and retrieval system without written consent. Information in this manual is subject to change without  
notice, and does not represent a commitment on the part of B&B Electronics.  
B&B Electronics shall not be liable for incidental or consequential damages resulting from the furnishing,  
performance, or use of this manual.  
All brand names used in this manual are the registered trademarks of their respective owners. The use of  
trademarks or other designations in this publication is for reference purposes only and does not constitute an  
endorsement by the trademark holder.  
Documentation Number 232HSPCC1199 Manual  
Cover Page  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Introduction  
Congratulations on your purchase of B&B Electronics’ High  
Speed Serial Card. We are pleased to have you as a customer and  
are proud to be shipping you a quality PCMCIA product. You are  
now the owner of a serial card that will give you years of error free  
service. The built-in 16650 UART (Universal Asynchronous  
Receiver / Transmitter) ensures error free data communications at  
speeds up to 460k bits per second. Once the serial card is set up  
and configured, it will be recognized as a COM port (1-4) by the  
communication software running on your machine.  
DOS and Windows 3.x Installation  
In most notebooks, the B&B Electronics’ Serial Card will be  
recognized and configured as soon as you insert the card into a free  
PCMCIA socket. If your notebook or desktop does recognize the  
Serial Card automatically, you can treat the card exactly the same  
as a DOS COM port. If the Serial Card is not recognized  
automatically, you should check with your manufacturer to see if  
your machine is loading the Card and Socket Service programs  
correctly. There may be a later version of Card and Socket  
Services available for your machine.  
Installing the Serial Card  
To install your Serial Card into your PCMCIA computer do the  
following:  
1. Locate the PCMCIA socket on your computer. (Refer to your  
PC users guide if needed.)  
2. With the product logo facing up (reference to B&B Electronics)  
and the 68-pin connector facing the PCMCIA socket, insert the  
card into the socket. Push firmly to fully engage the RS-232  
cable into the exposed side of the Serial Card.  
3. Any standard serial device may now be plugged into the 9-pin D  
connector.  
NOTE: Refer to the section of the manual labeled Serial Card  
Setup Examples.  
Documentation Number 232HSPCC1199 Manual  
PCMCIA Card  
1
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the Serial Card  
Once the Serial Card has been inserted, the PCMCIA socket  
must be configured for serial port operation. All PCMCIA  
input/output devices must be configured by software before they  
can be used. This configuring/enabling process must be repeated  
(that is, the enabling program must be run again) whenever the  
Card is powered off, then on again. A PCMCIA Serial Card will be  
powered off when the user removes it from the laptop and then re-  
inserts it. It may also be powered off, when the laptop goes into a  
"sleep" mode to conserve power.  
There are two kinds of PCMCIA enabling software:  
Card and Socket Services, and Point Enablers. You must  
choose which software enabling method you will use to  
activate your Serial Card. Each method has its advantages and  
disadvantages. (See Card and Socket Service Users section or  
Point Enabler Users section for more information.)  
Most laptops and desktops, that come equipped with PCMCIA  
slots, come with Card and Socket Services (CSS) software. This  
software manages the PCMCIA ports. If Card and Socket Services  
are running on your machine, your Serial Card will be set up and  
configured for you automatically when you insert the card into the  
PCMCIA slot. This is usually the easiest and best way to configure  
your Card. In most cases all you will need to do is plug in your  
Serial Card and access the assigned COM port. (Refer to your PC  
documentation for information concerning the Card and Socket  
Services provided with your system.)  
Software Setup  
Once your card is configured, it can be accessed through your  
application software by choosing the appropriate COM port. (Refer  
to the users manual associated with the software you are using for  
information on how to assign COM ports.)  
Card and Socket Service Users  
Card and Socket Services is a set of programs which are  
installed so that they are executed when the laptop is turned on.  
The Card and Socket Service programs then stay resident - they  
remain in memory all of the time. Card and Socket Services are  
designed to detect when a PCMCIA device has been inserted or  
powered off and then it automatically re-enables the device. This  
allows "hot swapping" - you can pull a PCMCIA card out and put in  
a different one and the new card is automatically enabled. Card and  
Socket Services also "know" how to enable a variety of devices from  
different manufacturers and attempt to prevent all conflicts between  
different PCMCIA cards.  
2
PCMCIA Card  
Documentation Number 232HSPCC1199 Manual  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The main disadvantage of using Card and Socket Services are  
that they permanently occupy a certain amount of laptop or desktop  
memory, which could be used by other programs.  
Most Card and Socket Service programs are loaded from the  
CONFIG.SYS file and use from 40K to 85K of memory space. If  
Card and Socket Services is running properly on your machine, then  
your Serial Card will be recognized and configured properly by  
simply inserting the card into one of the PCMCIA slots.  
Point Enabler Users  
Point Enablers are programs that run, enable a specific device  
(such as your B&B Electronics Serial Card), and exit. Point Enabler  
commands are typically installed in the AUTOEXEC.BAT file so that  
they will be executed once each time the laptop or desktop is turned  
on. The advantage of a Point Enabler, is that it uses system  
memory only while it runs. The disadvantage is that when the  
PCMCIA device is powered off, the user must remember to execute  
the Point Enabler command to re-enable the Serial Card. Another  
disadvantage in using Point Enablers is that you need a different  
one for each manufacturer's PCMCIA device. One manufacturer's  
Point Enabler may conflict with another's Point Enabler. A Point  
Enabler program may also conflict with an already running Card and  
Socket Service program. It is best NOT to run a Point Enabler if  
Card and Socket Services have already been loaded on your PC.  
Using the Point Enabler Program  
B&B Electronics has supplied a Point Enabler program called  
ENABLE.EXE. To use this program perform the following:  
1. Copy the file “ENABLE.EXE” from the supplied diskette onto  
your root directory. (Typing ENABLE /? on the command line  
will bring up a program help screen.)  
2. Use a text editor to add the following line to your  
AUTOEXEC.BAT file:  
ENABLE /com2 /sA /MD000  
Documentation Number 232HSPCC1199 Manual  
PCMCIA Card  
3
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Putting the above line in your AUTOEXEC.BAT file will  
cause the Enable program to run each time you reboot or turn  
your PC on. Do not add this line if Card and Socket Service  
programs are being used.  
The "/com#" switch indicates what COM port you want your  
Serial Card to be set up on. If you want COM4 instead of  
COM2, you would use the following:  
ENABLE /com4 /sA /MD000  
The "/s" switch indicates which PCMCIA slot contains your  
Serial Card. If you wanted slot B instead of slot A, you would  
use the following:  
ENABLE /com2 /sB /MD000  
(On machines with more than one slot, there is no standard way  
to distinguish which port will be A and which will be B. Usually  
they are not labeled. You may need to find out through trial and  
error.)  
The "/M" switch indicates what memory window the ENABLE  
program will use for communication with your Serial Card. The  
four-character number following the /M is a hexadecimal  
address. If you have a memory conflict at the default D000  
range, you could change it to something else. For example, if  
you wanted D800, you would enter:  
ENABLE /com2 /sA /MD800  
3.  
If you are not using an expanded memory manager such as  
EMM386.SYS, skip to step 4. If you are using an expanded  
memory manager such as EMM386.SYS, you must exclude the  
memory range you specified in step 2. (Each expanded  
memory manager has a command line switch that allows you to  
exclude a range of memory addresses from the memory  
manager's control. See your memory manager documentation  
for the exact form of the command line switch.) If you used the  
default D000 in step 2, you must exclude the range D000-D3FF;  
if you used D800, you must exclude D800-DBFF, etc.  
If you are using an expanded memory manager before you run  
Microsoft Windows, you must also add an "EMMExclude" line to  
the [386Enh] section of your SYSTEM.INI file to inform  
Windows of the excluded range. For example:  
4
PCMCIA Card  
Documentation Number 232HSPCC1199 Manual  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[386Enh]  
...  
EMMExclude=D000-D3FF  
...  
4. If you are using Windows 3.1, you may want to use a high-  
speed COMM driver instead of the standard COMM driver  
shipped with Windows. (Do not make this change if you are  
using Windows for Workgroups.) In your Windows SYSTEM.INI  
file, replace the line in the [boot] section that reads  
comm.drv=comm.drv  
with  
comm.drv=New High Speed Driver  
Refer to your software vendor for a new high speed COMM  
driver. This is optional and will allow your Serial Card to  
perform reliably in Windows at higher speeds.  
5. With your Serial Card inserted in a PCMCIA slot, it should now  
be configured and set up each time you turn on or reboot your  
PC. Note that since ENABLE.EXE is a Point Enabler, you will  
need to re-run the ENABLE command line with the appropriate  
switches each time your laptop goes to sleep or each time you  
remove and re-insert the Serial Card.  
NOTE: The ENABLE.EXE program does not support all  
PCMCIA controller types out on the market. It will work on all  
controllers that are compatible with the Intel 82365 PCMCIA  
controller.  
NOTE: The IBM 360 and 755/755C do not allow the range  
D000-D3FF to be used. We recommend using the range C800-  
CBFF instead.  
Windows 9x Installation  
To allow easy configuration of the 232HSPCC, a Windows 9x "INF"  
configuration file has been included on the distribution diskette. This file  
provides all of the setup information required by Windows 9x to allocate  
resources for the card.  
The 232HSPCC installation procedure differs slightly between  
versions of Windows 9x. In either case, the first step is to supply  
Windows 9x with the .inf configuration files supplied on the 232HSPCC  
disk.  
Documentation Number 232HSPCC1199 Manual  
PCMCIA Card  
5
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing a 232HSPCC in Windows 9x.  
The following procedure is used to configure a 232HSPCC for use with  
Windows 9x:  
1. Insert the 232HSPCC into any available PC Card socket.  
2. The first time a new PC Card type is installed, either the New  
Hardware Found window or the Update Device Driver Wizard  
window is displayed. After the initial installation, Windows 9x will  
automatically detect and configure the card. If neither window is  
displayed, skip to the section "232HSPCC Resource Settings".  
3. If your version of Windows displays the New Hardware Found  
window, select the Driver from Disk option button and click OK to  
continue. An Install From Disk dialog box should open. Insert the  
232HSPCC disk, select the correct drive letter (generally A:), and  
click the OK button. Windows 9x automatically browses the root  
directory for an INF file that defines configurations for the new  
hardware.  
4. If your version of Windows displays the Update Device Driver  
Wizard window, insert the 232HSPCC disk into the A: or B: drive  
and click Next. Windows 9x automatically browses the root directory  
of A: and B: for an INF file that defines configurations for the new  
hardware. Windows 9x will report that is has found the driver for the  
device. Click Finish to complete the installation.  
5. During the installation, it may be necessary to supply the Windows 9x  
CD or installation disks. Two drivers are required for serial devices,  
SERIALUI.DLL and SERIAL.VXD. In many cases, these files are  
already installed on the host computer. If this is the case, click “OK”  
when prompted for disks and select the “skip” option. The version of  
these files that exists in the Windows system directory will be used.  
6. Windows 9x socket services should indicate the 232HSPCC PCMCIA  
card configuration by a low-high tone beep.  
The 232HSPCC should now be configured. Windows 9x  
automatically assigns the 232HSPCC to the first available COM port  
number. For detailed configuration information read the "232HSPCC  
Resource Settings" section. In the future, Windows 9x will automatically  
recognize and configure the 232HSPCC in this default configuration. The  
232HSPCC will default to low speed mode when installed. To set the card  
to high speed click on the B&B HIGH SPEED RS-232 PC CARD under  
the PORTS in the DEVICE MANAGER. Click on the HIGH-SPEED tab,  
then select 1x or 4x mode, and click on apply.  
6
PCMCIA Card  
Documentation Number 232HSPCC1199 Manual  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
232HSPCC Resource Settings in Windows 9x  
To view and/or edit hardware devices in Windows 9x, use the system Device  
Manager. Consult Windows 9x on-line help for details on the use of the  
Device Manager.  
1. Open the Windows 9x System Properties window. To access the System  
Properties window double click the System icon in the Windows 95  
control panel, or click the My Computer icon on the Windows 95 desktop  
with the right mouse button and select Properties from the pull down  
menu.  
2. Click the Device Manager tab located along the top of the System  
Properties box. This lists all hardware devices connected to your  
computer. Configuration information is available on any of these devices  
via the Properties command button.  
3. Double click the device group Ports (COM and LPT). The 232HSPCC  
device name should appear in the list of adapters.  
4. Click the 232HSPCC’s device name and then click the Properties button  
to open a Port Properties box for this hardware adapter.  
5. Click the Resources tab located along the top of the properties box.  
6. The current address and interrupt configuration assigned by Windows 95  
is shown in this window. Several predefined Basic Configurations have  
been included allowing easy selection of different configurations that  
match standard serial port settings.  
7. When selecting a different basic configuration from the "Setting based on  
list" pay attention to the Conflicting device list information. Try to select  
a configuration that displays "No conflicts". If resource conflicts can be  
resolved by switching to one of the predefined basic configurations then  
skip down to the last step.  
8. To modify any of the system resources showing a conflict click the  
resource name and click the Change Setting button. An Edit Resource  
window will open up. Note that basic configuration 7 must be selected to  
modify the I/O address resource.  
9. Inside the Edit Resource window click on the up/down arrows to the right  
of the resource value. This scrolls you through all of the allowable  
resources for the 232HSPCC. Pay attention to the conflict information at  
the bottom of the window. Select a resource value that reports "No  
devices are conflicting". Click OK to save your changes, or Cancel to  
abort.  
10. Repeat the above steps to resolve of resource conflicts. Once satisfied  
with the settings make a note of the new settings and click the OK button  
to accept. Clicking the Cancel button does not save your changes.  
11. The 232HSPCC will automatically be reconfigured to the new resources  
specified. Any time the 232HSPCC is inserted Windows 95 will attempt  
to configure the card at these resource settings. Click the Use Automatic  
Settings to reset the 232HSPCC for automatic configuration.  
Documentation Number 232HSPCC1199 Manual  
PCMCIA Card  
7
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
Card Specifications  
°
°
PCMCIA Type II Card (85.6 x 54.0 x 5 mm)  
Power Consumption:  
25mA - Active  
5mA - Non-active  
°
Major PCMCIA ports supported:  
Type II, III & Toshiba IV  
Data Bits: 5, 6, 7, 8  
°
°
°
°
°
°
°
°
Stop Bits: 1, 1½, 2  
Parity:  
Speed:  
Temp.:  
N, 0, E  
460kbps - <2bps  
0° C - 50° C  
Driver Output Resistance:  
Driver Output Short-Circuit Current: 100mA Max  
Driver Output Voltage  
300Ω  
0 Level at 3-7KLoad:  
+5.0V to +15V  
1 Level at 3-7KLoad:  
-5.0V to -15V  
Output Level, No Load Max.: ±25V  
RS-232 input resistance  
3KMin, 5KTypical, 7KMax  
Receiver Input Threshold Low  
°
°
Active Mode:  
Shutdown Mode:  
0.8V Min, 1.2V Typical  
0.6V Min, 1.5V Typical  
°
Receiver Input Threshold High  
Active Mode:  
Shutdown mode:  
1.7V Typical, 2.4V Max  
1.5V Typical, 2.4V Max  
Documentation Number 232HSPCC1199 Manual  
PCMCIA Card  
A-1  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable Pinout Diagrams  
9-pin D Connector Pin Assignments  
Pin #  
Signal Name  
1
2
3
4
5
6
7
8
9
DCD  
RXD  
TXD  
DTR  
GND  
DSR  
RTS  
CTS  
RI  
Signal Pinout for 9-pin D connector  
Null Modem Cable Pinout  
3 - T X D  
2 - R X D  
4 - D TR  
6 - D SR  
7 - R TS  
8 -C TS  
1 - D C D  
9 - R I  
3 - TX D  
2 - R X D  
4 - D TR  
6 - D SR  
7 - R TS  
8 -C TS  
1 - D C D  
9 - R I  
5 - G N D  
5 - G N D  
R S 232 - N U LL M O D EM P IN O U T  
Com Port Information  
COM Port  
IoBase  
3F8  
2F8  
3E8  
2E8  
IRQ  
1
2
3
4
4
3
4
3
A-2  
PCMCIA Card  
Documentation Number 232HSPCC1199 Manual  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
B&B Electronics provides a ONE Year Limited Warranty. This  
Limited Warranty is given by B&B Electronics - only to the original  
purchaser of the accompanying hardware and/or software product,  
and it is not assignable to any other person. This Warranty covers  
defects in materials and/or workmanship under normal use and  
service. This Warranty also covers any failure of the product to  
perform in accordance with the description in the documentation  
accompanying the product. This Warranty does NOT cover  
damages caused by malfunction, product misuse, acts of nature, or  
is not responsible for products damaged by abuse, accident, misuse  
or misapplication, nor as a result of service or modification other  
than by an authorized B&B Electronics representative.  
During the Warranty period, B&B Electronics will, at its option, repair  
or replace the product at no charge when furnished with proof of  
purchase, provided that you deliver the product to B&B Electronics.  
The returned product must be accompanied by a return material  
authorization (RMA) number issued by B&B Electronics. If you ship  
the product, you must use the original container or equivalent, and  
you must pay the shipping charges to B&B Electronics. B&B  
Electronics will pay shipping charges back to any location in the  
contiguous United States. B&B Electronics may replace or repair the  
product with new or reconditioned parts, and the returned product  
becomes the property of B&B Electronics.  
Documentation Number 232HSPCC1199 Manual  
PCMCIA Card  
A-3  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC Part 15 Compliance  
The B&B Electronics Serial Card is covered by FCC rules for a  
Class B computing device, FCC ID Number MHI751001. As  
required by FCC regulations, the following is provided for the  
information and guidance of the user:  
Warning  
1. This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device many not cause  
harmful interference, and (2) this device must accept any interference  
received, including interference that that may cause undesired  
operation.  
2. This device has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy. If not installed and used  
in accordance with the instructions, it can cause harmful interference to  
radio communications. There is no guarantee that interference will or  
will not occur in a particular installation. Determine if the equipment  
does cause interference to radio or television reception, by turning the  
equipment off and on. The user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorientate or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment to an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
3. Changes or modifications not expressly approved by B&B Electronics  
could void the user's authority to operate this equipment.  
A-4  
PCMCIA Card  
Documentation Number 232HSPCC1199 Manual  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B: Declaration of Conformity  
DECLARATION OF CONFORMITY  
Importer’s Name:  
Importer’s Address:  
B&B Electronics Manufacturing Company  
P.O. Box 1040  
707 Dayton Road  
Ottawa, IL 61350 USA  
Model Numbers:  
Description:  
Type:  
Application of Council Directive:  
Standards:  
232HSPCC  
PCMCIA High-Speed Serial Card  
Light industrial ITE equipment  
89/336/EEC  
EN 50082-1 (IEC 801-2, IEC 801-3, IEC 801-4)  
EN 50081-1 (EN 55022, IEC 1000-4-2)  
EN 61000 (-4-3, -4-4)  
Michael J. Fahrion, Director of Engineering  
Documentation Number 232HSPCC1199 Manual  
PCMCIA Card  
B-1  
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104  
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Gas Grill GNS 430 430A User Manual
ADC Network Card FL2000 Series User Manual
Advantech Personal Computer AWS 8248 User Manual
Alcatel Lucent Network Router 7750 SR OS User Manual
Alliance Laundry Systems Fan UW35B2 User Manual
Amana Microwave Oven AMC5101AAB W User Manual
Amana Range W10533015A User Manual
American Standard Outdoor Shower 3636NEOE2 User Manual
Audiovox Car Stereo System CDC TO2 User Manual
Avenview TV Cables SPLIT HDSDI 6 User Manual