QUICK INSTALLATION GUIDE
Version 1.0
Step1 : Hardware Setup
Package Contents
1a
Connect the power adapter to the power socket and the other end to the DC 9V jack of the DSL
Router. Switch on both POWER adapter and the DSL MODEM.
1. 1 x DSL600E(C) Ethernet Modem
2. Quick Installation Guide
3. User Manual (Found in CD)
4. Utility CD
5. 1 x RJ-45 Straight Cable
6. 1 x Telephone Cable ( RJ-11)
7. 1x Power Adaptor (9V)
8. 2 x POTS Splitter
DSL MODEM
Power Cable
Aztech DSL600E(C)
Ethernet Modem
DC 9V JACK
POWER SWITCH
Power Adapter
Minimum System Requirements
- Windows 98SE/ ME/ 2000/ XP
- MAC 9.x to 10.x
- 64 MB RAM for Win 98 SE/ ME
- 128 MB RAM for Win XP/ 2000
- 64 MB or 128 MB RAM for Mac
- 4 x CDROM Drive
1b
Connect one end of the telephone line to the modem labeled ADSL and the other end to the
pots splitter labeled MODEM (optional) to connect a physical telephone, use another telephone
line connect from the telephone to the pots splitter labeled PHONE.
For Technical Support
Support Hotline Hours
Mon-Fri, 9am to 6pm
(Except public holidays)
Please contact
Aztech Systems Ltd
Tel: 6749-2062
CONNECT TO WALL SOCKET
- Ethernet Port (LAN Card)
POTS
SPLITTER
WALL SOCKET
(OPTIONAL)
FOR WINDOWS USERS:
Important
TELEPHONE
LINE
Before you run the utility CD, please make sure that PC’s Network Card TCP/IP
Properties and the Internet browser proxy is set accordingly. It is also assumed that the
computer/ notebook has the network card already installed.
DSL MODEM
DSL JACK
TELEPHONE
(Note: Settings for TCP/IP may be optional as the DSL Modem has a built-in function that allows the
user who has a Static IP Address on the network card to access either the DSL Modem configuration
page or surf web)
Note:
2. Settings for Internet Browser Proxy:
1a. Configure TCP/IP settings for Win 98SE/Me
The picture illustrates the connection t o a single telephone or fax machine. If you have another telephone
or fax machine connected to other telephone wall socket (sharing the same line), please attach another
POTS Splitter to telephone wall socket to prevent DSL signal from getting disconnected while surfing.
i) Windows Desktop-> right click on Internet Explorer (IE) icon, scroll
down to select Properties
i) Windows Desktop -> right click Network Neighborhood
for Win98SE / Network Places for Win ME -> Properties
ii) “Internet Properties” window -> click Connections tab -> Select
Never dial a connection -> click LAN Settings …
ii) “Network” window -> click the Configuration tab -> scroll down to
select and double click TCP/IP xxx (xxx refers refers to the model
of the Ethernet Network Card connected to the DSL600E(C))
1c Connect one end of the Ethernet cable to the Ethernet port of t he computer and the
other end to the ETHERNET Port of the DSL Modem.
iii) “Local Area Network (LAN) Settings “window ->remove the tick for
the option for the Automatic configuration -> remove the tick for the
option box for Proxy Server -> click OK -> click again to exit from
“Internet Properties” window
iii) “TCP/IP Properties” window -> select IP Address tab ->Select
Obtain an IP address automatically -> click DNS Configuration
tab -> click Disable DNS -> Click OK
ADSL MODEM
ETHERNET
CABLE
3. For Singnet Filtering Service User (e.g. Family On-line)
1b. Configure TCP/IP settings for Windows 2K/XP
i) Windows Desktop -> right click Internet Explorer (IE) -> click
Properties
i) Windows Desktop-> right click on Network Place icon, scroll down
to select Properties
ii) “Internet Properties” window -> click Connections tab Select Never
dial a connection -> click LAN Settings kkdk
ETHERNET PORT
ii) “Network & Dial-Up Connection” window -> click Local
Area Connection -> scroll down to select and double click
Internet Protocol TCP/IP
COMPUTER
iii) Click to put a tick for Automatically detect settings
iii) “Internet Protocol (TCP/IP) Properties” ->select Obtain an
IP address automatically -> select Obtain DNS server
address automatically -> click OK
iv) Click to put a tick for “Use a proxy server for your LAN ...”
-Type filter.singnet.com.sg in “Address” field ->
Type 8080 in “Port” -> click Advanced
-Proxy Settings window - > click to put a tick for “Use the
Same Proxy Server for all protocols”
-Type 192.168.1.1 in the space provided under
“Exceptions”. Click OK to exit “Proxy Setting” -> click OK
to exit “LAN Settings” -> click OK again to exit “Internet Properties”
Step2 : Configuring Using Setup Utility
Step3 : Connect to the Internet
3C It will show info that the internet connection was
3a Enter your Username and Password given by the
2b Setup Wizard will start to check and configure
FOR WINDOWS 98SE/ME/XP/2000 USERS
2a
successfully established. You may click on the
ISP. Depending on the service where you
the PC and DSL Router. In event the Wizard
prompts error, please follow the guide to rectify
the problem.
cube to start surfing or click EXIT to exit the utility
subscribed, you need to include the suffix
IMPORTANT: Insert the Utility CD into the CD-ROM. The utility
will auto-run and display the main menu. Select Setup Wizard
button to proceed.
“@singnet” or “@singnet1500” or
“@singnetbusiness” after the username. Click
CONTINUE to proceed.
(Note: If doesn’t auto-run, then go to the CD-ROM
drive and execute the Setup.exe)
FIREWALL REMINDERS:
If your computer is installed with a firewall, it might prompt that
the setup launcher is trying to access the internet, just click on
Allow or Grant Access to proceed with setup. If the firewall
does not give you the prompt and utility informed you that your
computer is with a firewall, exit the utility and try disabling the
firewall rerun the utility CD. Enable the firewall after completing
the setup.
3b Upon successful connection to the Internet, it will
display a summary of the settings, you may save
or print for future reference. Click CONTINUE to
proceed
2c After checking, it will prompt you to enter
Username and Password to setup the Internet
Connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
|