Assembly instructions
for tAilwind trAiler And
switchbAck trAiler hybrid
Amazing Quick fold system (patented)
1
3
2
SwiTchback Trailer/hybrid
Tailwind Trailer
Read these instructions carefully
before use and keep them
for future reference.
Your children’s safety
may be affected if you
do not follow these instructions.
These products comply with ASTM F1975-02
Download from Www.Somanuals.com. All Manuals Search And Download.
frAme
2 before unfolding trailer frame, you will need
to unsnap storage straps on both sides.
these are located near the trailer handle.
1
set wheels aside for now.
3 flip trailer frame so handle
is laying on top.
4 pull handle up until frame locks into place.
Warning: EnsurE that all locking dEvicEs arE EngagEd bEforE usE.
failurE to do so could causE thE trailEr to collapsE.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
reAr wheels
• to install rear wheel, gently slide
the wheel’s rear axle into the
trailer’s axle end until you hear it
click into place.
• to remove rear wheels, simply
push the red release button on
the trailer’s rear axle while pulling
the wheel out.
IMPORTANT: to ensure the wheel is
properly secured to the frame, test by
trying to pull the wheel out after installing.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
tow bAr
Tow Bar
1 locate tow bar under front end of
trailer frame.
2 pull tow bar up and to the side.
3 insert tow bar into frame bracket by pushing down on the tow bar’s quick release skewer.
once the quick release skewer has popped into place, secure tow bar by pressing quick
release lever until it is locked into position.
(To ensure tow bar is properly secured, test by pushing inward.)
Warning: failurE to lock tow bar’s Quick rElEasE skEwEr propErly to thE framE
could causE an unstablE condition rEsulting in sErious injury or dEath.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
securinG hitch to bicycle
if your rear wheel bicycle has a quick release skewer please skip to page 5.
rear Wheel With Lock nut
1
remove lock nut (turning counterclockwise)
from bicycle’s rear wheel hub.
The adaptor piece isn’t needed on this
style hub, you may want to store it for
future need.
mount hitch to bicycle’s rear wheel
bolt with lock nut and tighten (turning
clockwise) using a wrench while holding
the hitch in place to prevent it from
moving.
2
iMPOrTanT: we strongly recommend that the bicycle on which the trailer will be attached,
undergo a safety check by a qualified bicycle mechanic before attaching the trailer.
Warning: failurE to propErly tightEn lock nut to bicyclE could causE
hitch failurE and whEEl loss rEsulting in a sErious injury or dEath.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
securinG hitch to bicycle
if your rear wheel bicycle has a lock nut, please follow instructions on page 4.
rear Wheel With Quick release Skewer (Use only a standard Chromoly steel skewer.
Trailer mounting bracket is not designed for use with lightweight or speciality skewers.)
Adaptor
Hitch
insert skewer through
adaptor and mounting
hole in the hitch.
You will find the adaptor
secured to the hitch.
3
1
2
secure hitch and adapter
piece using the quick
remove the quick
release skewer
from bicycle’s rear
wheel hub.
release skewer to bicycle’s
rear wheel and tighten
skewer by securing the nut
on the opposite side until
finger tight. you will need
to hold the hitch in place
to prevent it from moving.
iMPOrTanT: we strongly recommend that the bicycle on
which the trailer will be attached, undergo a
safety check by a qualified bicycle mechanic
before attaching the trailer.
Continue on page 6
Warning: failurE to propErly tightEn bicyclE’s Quick rElEasE skEwEr could
causE hitch failurE and whEEl loss rEsulting in a sErious injury or dEath.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
securinG hitch to bicycle
now you will need to prepare the tow bar so that it can connect to the hitch already
on the bicycle. release the trailer’s quick release pin from tow bar.
3
insert tow bar into hitch and secure with trailer quick release pin.
4
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
release safety strap from tow bar by unclipping from storage peg and metal d-ring.
5
ꢀ
wrap safety strap around bicycle frame and clip it back to the metal d-ring on the tow
bar. (The quick release lever should face to the rear of the bike to prevent it from getting
accidentally caught on something and opening.)
Warning: do not usE thE hitch if you cannot propErly install thE back-up
safEty strap to your bicyclE.
failurE to propErly install and tightEn Quick rElEasE skEwEr or axlE nut could
causE hitch failurE and whEEl loss rEsulting in a sErious injury or dEath.
do not ridE without a flag. failurE to usE high visibility flag could rEsult
in an othErwisE avoidablE accidEnt.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
storinG tow bAr
1 lay trailer back so it is resting on handle with front end in the air. secure tow bar under
trailer making sure to push down at center of tow bar until it clicks into place and the
lock lip is over the tow bar.
2 to store the trailer quick release pin,
insert pin into front of trailer as shown.
(To secure safety strap clip safety strap back
onto the metal D-ring and secure back to
storage peg. Refer to SECURING HITCH TO
BICYCLE, step 5)
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Applies to switchbAck
trAiler hybrid model only
when in stroller mode
front wheel
Front Wheel Fork Legs
1 tip trailer back on its handle
to reveal the front fork.
2 slide front wheel fork legs into the closed position until they lock
into place.
Axle Flats
3 insert front wheel into forktips
by aligning the axle flats with the
forktip flats. secure front wheel to
frame by turning the front wheel
lever while holding the lock nut
on the opposite side. tighten until
you feel tension on lever and then
flip wheel lever over so that the
word “closed” is visible. the wheel
lever should face the rear of the
trailer to prevent it from getting
accidentally caught on something
and opening up during use.
Forktips
Continue on page 10
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable
Guide
Tube
Accordion
Cable Protector
Cantilever
Latch
4 pull on cable guide with your right hand while pushing the cantilever latch with your thumb.
with your left hand push the other caliper arm toward your right hand and secure cable guide
tube into cantilever latch. you will have to pull the accordion cable protector back in order to see
better when securing the cable guide tube into the cantilever latch.
V-Brake Components
a. cable guide tube (turn pipe)
B. accordion cable protector
C. Easy fitting cable fixing bolt
D. cartridge type pad
E. caliper arm
E
D
B
F
C
F. cantilever latch
a
Storing Front Wheel Fork (Switchback Model)
Lock Tab Button
lay trailer back so it’s resting on handle with front end in the air. remove front wheel.
release front wheel forks by pushing the lock tab button and sliding forks under trailer.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Applies to switchbAck
trAiler hybrid model only
when in stroller mode
hAnd brAke
AdjustinG
hAnd brAke
• if you do not have
good braking
action, simply
Parking
Button
squeeze the brake
handle five or
Cylinder
Ring
six times. if the
problem persists,
loosen the brake’s
cylinder ring to
adjust the small
Small Ring
the hand brake will only
function when front wheel
is attached to trailer.
ring, and then move the small ring away from the handle
to tighten the cable. (Please do not over tighten!) to lock
the rings, tighten the cylinder ring against the handle while
holding the small ring in place.
• to use the parking button
feature, simply squeeze the
brake handle and push the
park brake button.
reAr wheel pArkinG brAke
• push brake pedal
down to engage
• to release rear
parking brake,
simply lift up on
brake pedal.
rear parking brake.
Warning: EngagE rEar whEEl parking brakE bEforE loading
and unloading passEngEr(s).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
sAfety flAG
2 insert flag
pole into
flag pocket
located
on the left
side when
standing
behind trailer
making sure
to go in
between the
canopy fabric
and plastic
bracket as
shown.
1 locate flag and
connect both
parts of flag pole
together.
Flag
Pocket
3 to store and protect safety flag when not in
use, remove safety flag and disconnect the
two poles. standing behind trailer un-velcro
canopy’s back flap and flip over top of trailer
to locate flag pouch. roll flap up and insert
into flag pouch and velcro pouch closed.
Warning: do not ridE without flag in placE.
failurE to usE thE high visibility flag could
rEsults in an othErwisE avoidablE accidEnt.
nOTE: make sure to remove the
safety flag before folding trailer.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
cAnopy cover
3 during warm weather
you can roll rain flap
up. secure rain flap
by using the elastic
4 for more ventilation,
unzip one or both of
the side window vents
and secure them open
with the elastic loops.
1 Zip mesh flap all the
way around to keep
child(ren) safe from
flying debris.
2 during cooler weather
use the rain flap
to keep child(ren)
warmer.
loops on both sides.
Warning: failurE to usE thE mEsh covEr could ExposE your child(rEn)
to flying rocks and othEr dEbris. plEasE makE surE to havE thE mEsh covEr
closEd at all timEs.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning: whEn usEd with
only onE child, thE child
should bE sEatEd in thE
cEntEr sEating position.
sAfety hArness
Plastic Guide
2
1
3
1. to make the necessary adjustments to
the safety harness, detach the trailer
seat padding from the back of the
trailer to reveal the webbing straps.
5. velcro seat padding to back of trailer.
ꢀ. to adjust waist straps, feed webbing
through buckles to lengthen or shorten.
ꢁ. to adjust crotch strap, feed webbing
through tri-glide and slide webbing
strap to lengthen or shorten.
2. to adjust shoulder straps, hold plastic
guide and slide webbing strap to
lengthen or shorten.
ꢂ. secure shoulder straps to d-ring on
crotch strap.
3. to make shoulder straps longer, feed
webbing through tri-glide and pull on
bottom webbing strap.
ꢃ. secure waist straps through the crotch
strap and buckle up.
4. pull shoulder strap through seat
padding. Repeat steps 1-4 to remaining
shoulder straps.
ꢁ
14
Download from Www.Somanuals.com. All Manuals Search And Download.
PROPER FIVE POINT HARNESS CONFIGURATIONS
Warning: child(rEn) must wEar hElmEts whEn trailEring.
hElmEts can prEvEnt or significantly rEducE hEad injury
in EvEnt of accidEnt. chEck child pEriodically to EnsurE
that thEy havE not slippEd from corrEct sEating position.
only passEngErs who havE propEr nEck strEngth to hold
hEad up with hElmEt and sit upright on thEir own, should
ridE in a bicyclE trailEr.
ONE PASSENGER
TWO PASSENGERS
5
4
ꢀ
Warning: failurE to propErly attach
sEat bElts could rEsult in sErious
injury or dEath to occupant(s) in thE
EvEnt of an accidEnt.
failurE to sEat a singlE child in
thE cEntEr position could causE an
unstablE condition causing trailEr
to tip ovEr.
always adjust shouldEr harnEss
and crotch strap so thEy mEEt at
child’s lowEr chEst. adjusting harnEss
and bucklEs nEar your child’s nEck
could causE a sErious injury.
ꢂ
ꢃ
15
Download from Www.Somanuals.com. All Manuals Search And Download.
foldinG
1 stand in front of trailer to locate the fold handle straps on each side. pull on fold handles
with a snap and lift up to fold.
2 to keep trailer in the closed
position when folded, secure
storage strap to its partner strap
located on the opposite side of
the trailer frame when folded.
you will need to remove the rear
wheels to secure storage straps.
replace rear wheels once the
storage straps have been secured.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
mAintenAnce And storAGe
Hitch Maintenance
Before Each Ride:
Wheels tightly attached
Tire pressure
Check the hitch and back up safety straps are properly secured to trailer before every ride.
Periodically check the hitch for damage or cracks; if any damage is found do not use trailer!
Any damage/deterioration on any parts of your trailer, should be replaced immediately to
reduce the risk of personal injury. Contact our Customer Service Department at 800.241.1848.
Hitch properly secured with safety strap
Maximum load 100lbs (40kg)
Bicycle safety check, especially brakes
and tires
Canopy Care
You can machine wash your trailer’s canopy in cold water, gentle cycle with a mild detergent.
To minimize shrinkage, simply re-attach canopy to frame to dry. (Please do not put canopy
fabric in the dryer!) Be sure to remove the boards from seats before washing. Trailer frame
can be cleaned using a soft, dry cloth, and an occasional spray of household wax will
maintain its healthy glow.
Helmets
Safety flag in place
Children are securely fastened in
safety harness
Monthly Checklist
Windows
Inspect hitch for damage or loose parts
Plastic windows can crack at these low temperatures. If carrier is stored or left out in the cold
Inspect tow bar for smooth operation:
it should fold and unfold freely.
weather you will need to let it warm up before folding or assembling unit.
Inspect frame tubing and hardware
for cracks, damage or loose parts
Wheels and Axles
Check wheels for loose spokes and axles before every use. Moisture – especially from the
beach – can rust the wheels, footbrake and parts of frame. Spraying regularly with a silicone
lubricant will keep your trailer looking healthy.
Inspect tires for wear and cracks
Inspect wheels for trueness, cracks
and bearings for wear
Inspect fabric parts, child seat,
safety harness for any damage
Storage
Store your trailer in a dry, well ventilated area. To avoid mildew, make sure carrier is dry
before storing. Sunshine can fade fabric and dry out tires, so storing your trailer indoors
will prolong its good looks. However if you do store it outside, using a tarp will help protect
against weather wear. Do not store the carrier attached to your bicycle.
Please contact an authorized Baby Jogger
dealer or distributor for replacement parts if
you find any damage or worn out parts.
Warning: do not usE or storE trailEr at tEmpEraturEs bElow 32°f (0°c), as plastic
connEctor can bEcomE brittlE and possibly brEak, causing accidEnt rEsulting in
sErious injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You!
We wish you many happy journeys with your new trailer! Your
trailer is a great product, and we are proud to manufacture it.
If you have any questions or comments, please give us a call at.
1.800.241.1848
baby jogger is a division of dynamic brands
8575 magellan parkway, suite 1000 • richmond, va 23227
t: 800.241.1848 • f: 804.262.6277
www.babyjogger.com
bjc trailer 3.1.07
Download from Www.Somanuals.com. All Manuals Search And Download.
|