American Standard Indoor Furnishings 0066000 User Manual

RETROSPECT COLLECTION®  
PEDESTAL SINK  
FIRE CLAY  
RETROSPECT COLLECTION® PEDESTAL SINK  
• Authentically styled rectangle pedestal  
• Made from fine fireclay  
• Generous deck area for toiletries  
• Hidden front overflow  
• Supplied with mounting kit  
• Right Height™ for greater comfort  
Part of design matched Retrospect Collection®  
0282.800 Faucet holes on 8" (203mm) centers  
Nominal Dimensions:  
27" x 19-3/4" x 36"  
(686 x 502 x 914mm)  
Separate Components:  
13-3/4"  
3 Holes  
0282.008 Pedestal top 8" (203mm) centers  
0066.000 Pedestal only  
(349mm)  
1-3/8" (35mm) Dia.  
8"  
(203mm)  
FINISHED WALL  
3-3/8"  
(86mm)  
Bowl sizes:  
9"  
(229mm)  
15-1/2" (394mm) wide  
12" (305mm) front to back  
6-1/8" (156mm) deep  
15"  
(381mm)  
19-3/4"  
(502mm)  
1-3/4" DIA.  
STD. DRAIN  
OUTLET  
Compliance Certifications -  
Meets or Exceeds the Following Specifications:  
• ASME A112.19.9M for Non-Vitreous  
Ceramic Fixtures  
PED TOP  
OUTLINE  
27"  
(686mm)  
• CAN/CSA B45 Series  
8-1/8"  
7-1/4"  
(184mm)  
TO BOTTOM  
OF DRAIN OUTLET  
(206mm)  
8"  
3/8" (10mm) DIA.  
(203mm)  
SINK ANCHOR  
SCREW HOLES  
ON 13-3/4" (349mm)  
CENTRES  
SUPPLIES  
AS REQ'D  
36"  
(914mm)  
1-1/4 O.D.  
WASTE  
To Be Specified:  
Color: White  
Recommended Faucet: 2373.701  
Faucet Finish:  
24"  
*
(610mm)  
28-1/4"  
(718mm)  
1-1/4" O.D.  
TAILPIECE  
22"  
*
(559mm)  
Supplies:  
1-1/4" Trap:  
FINISHED  
FLOOR  
PEDESTAL  
SIDE SECTION  
3/8" (10mm) DIA.  
BASE ANCHOR  
SCREW HOLE  
CENTER  
9-7/8"  
(251mm)  
NOTES:  
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE  
*
SUGGESTED.  
PEDESTAL ANCHORING SCREWS NOT INCLUDED.  
SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST  
BE TAKEN FROM FIXTURE.  
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.  
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.  
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.  
IMPORTANT: Dimensions of fixtures are nominal and may vary within the  
range of tolerances established by ANSI Standard A112.19.9.  
These measurements are subject to change or cancellation. No responsibility  
is assumed for use of superseded or voided pages.  
J8  
© 2008 AS America Inc.  
Revised 2/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  

ADC Clothes Dryer ADG 758 User Manual
ADTRAN Network Card E220 HFAC HDSL User Manual
AEG Freezer AGN71200F0 User Manual
Aiwa Stereo System CSD TD901 User Manual
Amana Refrigerator A4TXNWFW User Manual
American Aldes Ventilation Hood LT 15 User Manual
Audiovox Stereo Amplifier PA S2100 User Manual
Barco Car Video System MDNC 4130 User Manual
BC Speakers Portable Speaker ME75 User Manual
Beko Dishwasher DSFN 1532 User Manual