������������������������
������������
Dishwasher
DSFN 1532
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1 Know your dishwasher / speci-
7 How to clean your machine 21
Upper spray arm
Lower spray arm
22
22
fication
3
2 Warning and safety
information
Electrical Safety
Children’s Safety
General
Recycling
Energy and water saving
What should not be washed in your
dishwasher
8 Before calling service
/ Trouble shooting
5
5
5
5
6
6
23
6
3 Before first use
Hot Air Drying
Electrical requirements
7
7
7
4 Installation
Warning
7
8
8
8
8
9
9
This appliance must be earthed
Important
Fitting a different plug
Water inlet hose connection
Drain Hose Connection
5 How to use
11
Water hardness & regeneration
settings
Detergent use
Filling detergent dispenser
Rinse aid
Loading the dishwasher
Folding plate support rods
Movable Cutlery Basket
Upper basket with variable height
setting
11
14
16
16
17
18
18
19
6 Operating the dishwasher 20
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Know your dishwasher / specification
���������
��������
��������������
�����
���������
������������
������������������������
���������������
����������������
���������
�������������������
������������
�����
���������
��������������
�������
�������������������
�������������
���������
����������
���������
������������������
�����
Start/Cancel Button
LED Progress Indicator Lights
Door Handle
Programme Selection Button
Programme Indicator Lights
Salt Level Indicator Light
Half Load Button
Rinse Aid Indicator Light
On/Off Button
3
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Specification
Load Capacity
Height
: 12 Place settings
: 850 mm
Width
: 598 mm
Depth
: 598 mm
Depth/Height (without worktop)
Net weight
: 570 mm / 820 mm
: 44 kg
Supply voltage
Fuse currrent
Total power
: 220-240 V ~ 50 Hz
: 13 A
: 1900-2200 W
: 2000 W
Heater power
Pump powers
Diameter of plates for
Upper basket
Lower basket
: 125/30 W
: 25 cm max.
: 31 cm max.
Because we continually strive to improve our products, we may change our
specifications and designs without prior notice.
Note for Testing Institutes
The necessary information for performance testing will be provided upon request.
The request can be done by e-mail through:
Please do not forget to write the model code ,stock code and serial number
information of the appliance besides your contact information in the e-mail.
The model code, stock code and serial number information can be found on the
rating label, which is placed on the side of the door.
4
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Warning and safety information
2
Never allow your children to play on or
sit onto the front door when the front
door is open.
Electrical Safety
The dishwasher should only be
operated on the voltage specified. For
electrical safety, only earthed plugs
and sockets should be used. Always
use the fused plug provided with the
appliance. The user is responsible
for meeting these basic safety
requirements. The life of your machine
and your safety depend on you using
an electrical installation compliant to
standards.
After unpacking your machine, keep
the packing material out of children’s
reach.
Warning !
Long cutlery, such as ladles and
long knives, etc must be placed
horizontally on top of the full cutlery
basket or on the racks to prevent
accidental injury.
Do not use an extension cable.
When disconnecting your machine
from the mains supply, always pull from
the plug. Never pull the cord itself.
General
This dishwasher has been designed to
clean your dirty dishes at home.
Never use chemical solvents in your
machine; this may lead to explosion
risk.
Children’s Safety
Never allow your children to play with
your dishwasher.
Never use materials other than
specially produced softening salts in
the salt dispenser of your machine.
Dishwasher detergents contain irritants
and abrasives. These ingredients might
have caustic effects in the eyes, mouth
and throat.
Never use materials other than
specially produced detergents and
rinse-aids in the detergent and rinse
aid dispensers of your machine.
They can be extremely dangerous if
swallowed. Avoid contact with skin
and eyes. Check that the detergent
receptacle is empty after completion of
the wash cycle.
Please dispose of the packaging
material and old appliances carefully.
Please ensure old machines do not
become a threat to child safety. It is
known that children lock themselves
in unused machines. To avoid such a
problem it is advised that you cut the
mains cable off and break the door
latch so it does not lock.
Keep detergents out of children’s
reach and do not put detergent in the
machine until right before you start the
washing programme.
The water in your dishwasher is not
suitable for drinking, for this reason
do not allow your children near your
machine when the front door is open.
5
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
The door of your machine is designed
to support the weight of a full basket
when the lower basket is pulled all the
way out. Never place any other load
on the door, otherwise the machine
may tip over.
human health due to the presence of
hazardous substances.
Energy and water saving
Scrape excess food from the dishes
before loading. Start your dishwasher
after fully loading the machine. Do not
use the pre-wash programme unless
required. Make your programme
After using the dishwasher always
close the door as an open door can be
a hazard.
selection as per the programme chart
and quick reference guide supplied.
Do not open the door whilst the
appliance is in operation.
What should not be washed in
your dishwasher
Recycling
Do not wash items soiled with cigarette
ash, candle/paint wax, dyes, chemicals
etc. since these may damage your
machine
Please help us to protect our
environment. Packing materials and
some parts of your machine are
produced using recyclable materials.
These materials are marked up with
recycling symbol and material type
information (>PE<, >PS<, >POM< …).
These raw materials should not be
mixed with general refuse and should
be given to recycling centers.
We suggest you contact your local
authority for disposal information and
facilities available.
Do not wash forks, knives and spoons
with wooden or bone handles, items
stuck together with adhesives,
plastic items not resistant to high
temperatures. Copper, tin items and
aluminium ware in your dishwasher.
As with hand washing, some “on-
glaze” decorated china, aluminum or
silver have a tendency to discolour or
fade. Also, certain types of glassware
and crystals may lose their shine and
become opaque in time.
This product bears the
selective sorting symbol
for waste electrical and
electronic equipment
(WEEE).
A chemical reaction can occur between
silver cutlery and stainless steel
cutlery. As a precaution, do not wash
together.
This means that this product must
be handled pursuant to European
Directive 2002/96/EC in order to be
recycled or dismantled to minimize its
impact on the environment. For further
information, please contact your local
or regional authorities.
Iron and cast iron objects can rust and
stain other items.
Pay special attention to whether or not
the item you wash in the dishwasher is
dishwasher-proof.
Electronic products not included in the
selective sorting process are potentially
dangerous for the environment and
6
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
If in doubt, contact the manufacturer of
the item.
Hot Air Drying
Hot Air Drying ensures your dishes are
dried efficiently.
Do not overload your dishwasher or
do not load items other than those
mentioned in this manual.
Before first use
3
After unpacking your dishwasher,
check the machine against any
possible transportation damage. Never
install and use damaged machines. If
your machine is damaged contact your
retailer. Always have your machine
installed by qualified electrician/
4
Installation
When deciding on where to install
your new dishwasher, ensure that the
position of your dishwasher makes it
easy and quick for you to place the
dishes in the dishwasher and also to
take them out and store away after the
dishwashing is completed.
plumber to ensure correct installation.
Any repairs and maintenance work
on this dishwasher should be carried
out by authorised service staff only.
Unauthorised repairs are not only
dangerous, but also lead to the
cancellation of your warranty.
Avoid placing the dishwasher where
the ambient temperature is likely to fall
below. 5 degrees C. (41° F)
If your dishwasher has an Internal
Lighting; incase of a defect broken
lamps can be changed by an
authorized service technican.
When positioning your appliance, take
care not to damage your flooring, pipes
wall coverings etc. Do not move the
appliance by pulling by the door or
handle
Make sure the electricity and water
connections of your dishwasher are
in compliance with the instructions for
assembly as stated in the relevant part
of this booklet.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
It is recommended that the
dishwasher is operated on the
Economy programme with prewash
before loading with dishes.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
Before the first wash, add 1 Litre of
water to the salt container of your
machine.
7
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
If the supply cord or the mains lead
is damaged please do not replace it
yourself. The supply cord or the mains
lead must be replaced by a Beko
Authorised Service Agent or a similarly
qualified person.
1. Connect the green - yellow or
green (earth) wire to the terminal
in the plug marked ‘E’ or with the
symbol
or coloured green
and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’
or coloured black.
3. Connect the brown (live) wire to
the terminal in the plug marked ‘L’
or coloured red.
Warning
This appliance must be
earthed
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
If the fitted moulded plug is not suitable
for your socket, then the plug should
be cut off and an appropriate plug
fitted.
Destroy the old plug, which is cut off as
a plug with a bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
����������������
��������
The moulded plug on this appliance
incorporates a 13A fuse. Should the
fuse need to be replaced an ASTA
approved BS1362 fuse of the same
rating must be used. Do not forget
to refit the fuse cover. In the event of
losing the fuse cover, the plug must
not be used until a replacement fuse
cover has been fitted. Colour of the
replacement fuse cover must be the
same colour as that visible on the
pin face of the plug. Fuse covers are
available from any good electrical
store.
�
�
�������
������������
�����
Important
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
8
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Water inlet hose connection
Make sure your plumbing is suitable to
install your new dishwasher. If in doubt
contact a qualified plumber.
Drain Hose Connection
Fit the drainage hose of your machine
to the drainage pipe without bending.
Secure your hose firmly to the waste
pipe to avoid it coming off during the
washing process.
The appliance must be connected
to the water mains using the new
hose set supplied with your new
dishwasher. Old hose sets must not
be re-used.
The waste pipe must only be
connected into the foul drains and not
surface water drainage system.
The water pressure coming from
the water mains supply must be a
minimum of 0.3 and a maximum of 10
bars.
The hose should be placed between
50 cm and 110 cm from the floor level
and must not be extended otherwise
the machine may not empty the waste
water.
Connect the straight end to your water
1
mains supply
Ensure plastic filter
and black rubber seal is in place.
Please turn on the tap and check for
leakages after connecting the hose.
We recommend the tap is turned off
when the machine is not being used.
If you only have one cold water
feed (For example for your washing
machine) don’t worry, a Y adaptor
will provide you with the additional
cold water feed you need for your
dishwasher. Y adaptor is available from
most DIY stores.
����������
���������
�������
�
9
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
tap and a drain.
Installation of dishwasher
Remove all packaging before
positioning the machine.
When inserting the machine, ensure
that the water inlet and drain hoses are
not linked or squashed.
See the following diagram. Ensure
there is a clearance each side of the
machine to allow slight side ways
movement for servicing.
Care must be taken to ensure that
the appliance does not stand on the
electrical supply cable.
Note:
Good levelling is essential for correct
closure and sealing of the door.
If there is already enough space, you
don’t need to remove the worktop to
install it under the counter.
Make sure your dishwasher is perfectly
level using the adjustable feet.
Position the machine next to a water
10
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
When the appliance is
correctly levelled, the
door will not catch on the
inner liner on either side
of the cabinet.
If the door does not
close correctly, loosen
or tighten the adjustable
feet, until the machine is
perfectly level.
��
�
�
5 How to use
Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on your
dishes. Your dishwasher has a special water softening system to remove the
hardness of the tap water. Setting this system correctly will increase the washing
effectiveness.
To find out the water hardness level of water in your area, contact your local
Water Board or Determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness will possibly
be different. It is essential to reset the water hardness in order to obtain
optimum washing efficiency.
����������
�������
�������
�
�
�
�
��������
�
�
�������
�������
�������
�������
�������
���������������������
����������������
�������������������
�����������������
��������
����������������������
����������
�������������
�������������������
��������������������
���������
��������
���������
�����������������������������������������������
������������������������������������������������
������������������
�������������
��������������� ��������������
������������ ����������������� ������������������
����������������
�������
11
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
��������������������
�������� ������ ������ ������
�
�����
������� ������� ��������
������������������������
���
���
���
���
��
���������������������������������������������
�������������
���
�������
����������������������������������������������
�������������
�������
�������
����
����
�����
�����
���������������������������������������������
�������������
�����
�����
�������������������������������������������������
����������������������������
�������
�������
�������
�����
�����
�����
�����
�����
�����
�����
�����
�����
��������������������������������������������������
����������������������������
! For level 5 and level 6 there is no
difference between hardness level
settings.
Programme Follow-up indicators
light up continously when machine
enters into the water hardness
adjustment mode.
If the hardness of the water you
use is more than 80°dF (French
Hardness) or if you are using pit
water, we recommend that you use
filters and purifiers.
•
•
To adjust new Water Hardness
Level: adjust the water hardness
level according to the “Water
Hardness Level Adjustment Table”
( See Water Hardness Level
Adjustment Table ) by pressing the
programme selection button again.
If you select a water hardness
level other than stored in the
memory, programme follow up
indicators flash with an interval
of 1 second. The selected water
hardness level in indicated by the
Programme Selection indicators.
Press “Start/Pause/Cancel” button
once to store the level you have
selected. Programme follow-up
indicators light up continuously
when the water hardness level is
stored.
* If your tap water is below 9F
(French hardness), you do not need
to use special dishwasher salt in your
machine. In this case, salt indicator
light will be on continuously.
•
•
Open the door of the machine
Press programme selection button
when machine is switched off.
Keep programme selection button
pressed and press on/off button
to turn your machine on. Do not
release the programme selection
button until the defined “Water
Hardness Level Indicator” of your
machine is displayed ( See Water
Hardness Level Adjustment Table )
•
•
•
Press the on/off button to turn off
your machine.
12
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
! If you move your house, it is very
important to make the water
After you fill the container, screw cap
tightly back into place turning clockwise
until you hear a click sound.
In case the light of the salt indicator is
still on for a long time after filling with
salt, mix the salty water inside the salt
box using a spoon.
hardness level adjustment of your
machine according to the new
location you move in order to
preserve the washing efficiency.
Adding Dishwasher Salt
Only use special pelletized dishwasher
salt in your machine to soften the hard
water. Never use other types of salts
including table salt, animal feeding salt,
sea salt, culinary salt. These types of
salt do not dissolve in water easily and
will damage your appliance beyond
repair.
When you run the dishwasher, the
Water softener will be full of water.
Therefore, adding softening salt should
always be done immediately before
you start the dishwasher.
������
�
�
�
�
�
�
�
�
�
�
�
�
�
�
Caution: Only fill with salt just before
starting one of the complete washing
programmes to prevent any grains of
salt causing corrosion. Ensure 1lt of
water has been added. You can put
approximately 2 kg softening salt in the
Water softener.
To fill the container with softening
salt, remove the lower rack first and
unscrew the cap of the water softener
turning anti clockwise.
Using the funnel provided will make
filling easier.
13
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Warning!
Detergent use
Two-in-one and three-in-one
detergents
You will obtain the best results from
your dishwasher if you use separate
detergent, rinse aid and water-
softening salt.
Any brand of powder, gel and tablet
detergents that have been designed for
household dishwashers, may be used.
Keep detergents in a cool and dry
place and out of the reach of children.
Detergent manufacturers also produce
combined detergents known as ‘two-in-
one’ and ‘three-in-one’.
Detergent must be added to the
container before each use.
Detergent overdose may cause
scratches on your dishes and there
may be traces of detergent left in your
machine.
Three-in-one: These products contain
detergent, rinse aid and water-
softening salt.
Two-in-one: These products contain
detergent and either rinse aid or water-
softening salt.
Three types of detergent are available
•
Phosphate and containing
chlorine.
In general, you will obtain satisfactory
results from combined detergents only
under specific usage conditions. These
detergents contain predetermined
amounts of rinse aid and/or softening
salt. This means that you cannot adjust
the amount of water-softening salt
and rinse aid required to suit the water
hardness level in your home.
•
•
Phosphate containing no chlorine
Neither containing phosphate nor
chlorine
New compact powders are generally
phosphate-free. As phosphates have
water softening properties, we suggest
you add salt to the salt container even
if the hardness of your water is as low
as a 6 clarke degrees.
You should bear the following points in
mind when using such detergents:
In hard water areas if a phosphate free
detergent is used, white marks on the
dishes and glasses may be observed.
It may be prevented by increasing the
amount of detergent.
•
Be sure to check the specifications
of the product you are using and
whether it is a combined product
or not.
•
•
Follow the instructions on the
packet when using these products.
The use of these products at the
correct appliance settings will
ensure economical use of salt and/
or rinse aid.
If the detergent is in tablet form,
never place these in the internal
section or cutlery basket of the
Detergents without chlorine have less
bleaching effect. Coloured stains may
not be completely removed. This may
be prevented by increasing the amount
of detergent, using a programme with
a higher wash temperature or using a
detergent with chlorine.
•
14
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
dishwasher. Always place the
tablets in the detergent dispenser of
the detergent holder.
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
Put your appliance’s rinse aid
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
If you use combined detergents
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
These detergents do not contain
softening salt so you need to use
the softening setting as described
in the manual, making sure that
there is salt in the water softener
with every wash and that you refill
the water softener with salt every
time it is empty.
Using three-in-one detergent,
softening salt and rinse aid.
•
•
•
•
•
These detergents will not give you
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
Put your appliance’s rinse aid
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
If you use combined detergents
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
If you use combined detergents
without adding salt, lime scale may
form especially on glasses. To avoid
lime scale formation:
Put your appliance’s water softener
setting at “1” and add salt. When
the salt is used up, add more salt to
the water softener.
•
•
•
Important warning
Should you encounter a problem that
has previously never occured after you
start using these detergents, contact
the detergent manufacturer directly.
You will find contact details on the
packet.
Using two-in-one detergent: detergent
and softening salt
If you stop using this kind of
detergent:
•
These detergents do not contain
rinse aid so you need to use the
rinse aid setting as described in the
manual, making sure that there is
rinse aid in the rinse aid dispenser
with every wash and that you refill
the rinse aid dispenser with rinse aid
every time it is empty.
•
Ensure that the salt and rinse aid
dispensers are full.
•
Put the water hardness setting at
the highest level and run a wash
cycle with the appliance empty.
After washing while empty, return
the water hardness setting to the
correct level for your mains water
hardness shown in the manual.
Put the rinse aid setting at the
correct level.
•
•
Using two-in-one detergent and rinse
aid
•
These detergents will not give you
15
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Filling
detergent
dispenser
If the dishwasher
service wash at the highest temperature
possible every 3 - 4 months with the
dishwasher empty and without using
detergent. It is not recommended to carry
it out with auto programme.
is considerably full
and the dishes are
Rinse aid
Use only rinse aid intended for household
dishwashers.
relatively dirty, fill the
main container (A)
up to 25cm³ level.
If the dishwasher is not quite full and
the dishes are only slightly soiled, fill
the main container (A) only up to 15cm³
level.
If your dishes are kept unwashed for
a long time and the food particles are
stuck on the dishes also fill the small
container (B) up to 5cm³. Depending
on the degree of soiling and the
water hardness in your area it may be
necessary to add more detergent.
The rinse aid is specially formulated
to be used in the dishwashers for the
prevention of watermarks and scale on
dishes and to increase the efficiency
of the washing and drying processes.
Therefore, make sure that
there is adequate amount of rinse aid in
the rinse aid dispenser of your machine.
You can adjust the amount of rinse aid
used during the wash programme by
turning the rinse aid dispenser regulator
(C).
The dispenser regulator (C) may be set
between levels 1 and 6 (6 being the
maximum amount of rinse aid usage).
Your machine is pre-set at the factory to
level 4.
According to the finish and drying results
obtained, adjust the dose of rinse aid by
means of the six position
Powder and gel detergents are poured
into the dispenser.
If you are using tablet detergent read the
manufacturer’s recommendations on the
packaging in order to determine where
the tablets should be placed inside the
dishwasher (detergent dispenser, cutlery
basket, etc.)
After you put in the detergent, shut the
container lid (D) and ensure you hear
the clicking sound.
During the wash programme the
detergent will dispense automatically
and the lid (D) will remain open when the
programme finishes.
Do not use detergent when using the
pre-wash programme.
selector. (Position 1: minimum dose,
Position 6: maximum dose.) Gradually
increase the dose if there are drops of
����������������
Detergent residues
Regular use of low temperature washes
and/or short duration programmes can
lead to undissolved detergent residue
build up. We recommend to carry out a
���������������������������
���������������������
16
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
water or lime spots on the dishes after
washing. Reduce it if there are sticky
whitish streaks on the dishes.
Filling the rinse aid dispenser
Open the rinse aid dispenser lid by
pressing the button as shown in the
diagram.
Fill up with rinse aid until the container
is full to level of ’max’ mark .
Put the lid (E) on and ensure you hear
the clicking sound.
Remember to CLOSE the lid after
every refill.
Make sure you clean any rinse aid that
you might have spilled.
����������������
�
Loading the dishwasher
Loading the dishwasher correctly will
increase the washing, drying and
energy performance of your machine.
Examine the information given in this
section and the information stated
in the Programme chart and quick
reference card given with the manual.
Remove any large scraps of food
from the dishes before placing in the
dishwasher to avoid clogging the filters.
�
�
There are three separate baskets, in
which you can put your dishes.
Place large or heavily soiled items in
the lower basket, and small, light or
delicate articles in the upper basket.
Put forks, small and medium size
knives and spoons in the cutlery
basket.
Place tall, narrow items in the middle of
the racks.
Long-stemmed glasses should lean
against the basket, the racks, or the
supports not against the dishes.
When loading your dishwasher please
ensure tall glasses (and/or wine glasses)
rest against the sides of the upper basket.
Do not allow tall glasses to rest against
each other since they may be damaged
during washing if not properly supported.
Always arrange saucepans, cups and
glasses etc. upside down.
The shelves on the rack are made
height adjustable to accommodate tall
items.
You can fold the racks in the upper basket
when you need more space for larger
items.
17
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Folding plate support rods
There are four separate “folding plate
support rods” in the lower basket of
your dishwasher designed to allow
you more space to accommodate
saucepans and large bowls in the
lower basket. You can either fold each
section (1,2,3,4) individually or, all at
once, to create a large empty space.
Simply press the handgrips (A) and
fold them down”
Movable Cutlery Basket
Designed to allow free placement of
the dishes according to their size, the
movable cutlery basket can slide over
the tines to the left (A) and right (B)
side.
�
�
�
18
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Upper basket with variable
height setting
The upper basket is equipped with a
lifting mechanism which enables you
to change the height of the basket
without having to remove it from the
dishwasher, even if it is fully loaded.
The height of the upper basket was
set to its lowest position at the factory.
To lift the upper basket to the “high”
(A) position, hold it on one side and
carefully pull it upwards. To lift the
opposite side of the basket, hold it and
pull it upwards in the same manner (A).
�
To lower the upper rack, hold and
press in the rack lever on one side
and carefully lower the rack without
releasing the lever (B). Repeat the
procedure with the lever on the
opposite side of the basket. Make sure
that both levers catch at the same
height.
�
�
19
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
6
Operating the dishwasher
•
•
Turn the water tap on. Open the
door of the machine.
Check that the upper and lower
arms can rotate freely.
! Just after the dishwasher has started
the selected programme, if you find
that you want to put in another item to
be washed, open the door carefully.
Care must be taken if opening the
door, as steam and water will escape.
Then after putting in the item, close
the door. The dishwasher will resume
operation.
•
•
•
Add the detergent
Close the door of the machine
Push in the on/off button and
check that the programme
indicator lights come on.
•
Check the salt and rinse aid level
indicator lights before you start the
Unloading dishwasher
machine. If necessary add salt and Dishes should be allowed to cool for
rinse aid.
about 15 - 30 minutes after the end of
the programme.
•
•
Select the required programme by
referring to the programme chart.
Choose the desired programme
You will improve drying results by
Press start / stop button and check leaving the dishwasher door ajar for
that the start / stop indicator light
comes on.
at least 15-30 minutes as soon as the
programme finishes.
! Do not open the dishwasher door
whilst the appliance is in operation.
However, in case the door is opened
while the machine is working, then
a safety mechanism ensures the
! Care must be taken when opening
the door, as steam will escape.
First unload the lower, then the upper
rack. This prevents drops of water from
machine immediately stops. Water may falling onto the full lower basket when
be very hot, so be careful.
the dishes in the upper basket are
being removed.
! Care must be taken if opening the
door, as steam and water will escape.
•
Press the on/off button after the
programme is completed. The
indicator lights will go off.
Unload the baskets - we
recommend to turn off the water
tap when not in use
•
20
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
7 How to clean your machine
Cleaning your machine at regular
intervals ensures longer product life
and reduces the risk of recurring
problems. Clean spray arms and in
particular filters at least once a week
! Always unplug the appliance and turn
off the water supply before cleaning.
�����������
To clean the door seal, use a neutral
detergent and a damp cloth. To clean
the control panel, use only slightly
damp cloth.
�������������
������������
! Do not use abrasive detergents.
If the appliance is not going to be used
for a long period of time, switch off,
turn off the water clean and leave the
door ajar.
How to clean the filters and spray
arms filters
For the efficient operation of your
dishwasher, check the filters and the
spray arms regularly.
There are three different filters in your
machine
Main filter
Coarse filter
Micro filter
To remove the coarse and micro
filter assembly to clean, turn it anti
clockwise as far as it goes and lift it up.
Then press the two tongues inwards
and pull out the coarse filter.
Pull the main filter off.
21
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
Clean all three filters under running tap
water with a brush.
Reinsert the main filter in its place.
Place the coarse filter into the micro
filter. Ensure the marks align properly.
Turn the coarse filter clockwise until
you hear a clicking sound.
It is important that you fit the filters
correctly.
Caution: the dishwasher must not
be used without filters.
Incorrect repositioning of the filters
will produce poor washing results.
Cleaning of the filters is vital to
ensure correct operation of the
machine.
Upper spray arm
Turn the nut anti clockwise and remove
both the nut and the spray arm.
Flush away food particles under
running water.
Put the spray arm back on and screw
on the nut turning clockwise until a
clicking sound is heard.
Lower spray arm
Remove the spray arm from its slot
by releasing the catches and pulling it
upwards.
Flush away the food particles under
running water.
Reinsert the spray arm back into its
original position.
22
Download from Www.Somanuals.com.GAlBl Manuals Search And Download.
8 Before calling service / Trouble shooting
Before calling service check the following & Trouble shooting guide supplied on
the following page.
�
�������������������������������������
������������������������
��������������������������
������������������������������
�
��� ���� ���������� ������� ������
������ ���� ������������ ��� �����
����������������������������������
�������������������������������
����������
���������������������������
TROUBLE SHOOTING GUIDE
SYMPTOMS
POSSIBLE CAUSES
SOLUTIONS
Insufficient amount of
detergent
Increase the amount of detergent, especially when
washing full loads, or in hard water.
Increase water softener dosage. Use additional
detergent, increase rinse agent dosage.
Hard water.
Check the nozzle holes in the spray arms. They may
be blocked with a soil particle. Check and clean them
periodically.
Spray arms need cleaning
Spotting /
filming / poor
cleaning results
Follow instructions for use for proper loading
procedures. Place dishes so water spray reaches all
soiled surfaces. Do not overcrowd the baskets since
this will block the water spray.
Improper loading.
Insufficient water fill.
Check mains water pressure
Remove any accumulated or deposited foods. Check
and clean them periodically.
Filter system needs cleaning.
Oversudsing - Prewashing withRinse items thoroughly before putting them in the
a liquid dishwashing detergent.dishwasher to remove dishwashing detergent.
Check to be sure water action is not blocked by
Water not reaching surfaces, dishes. Check filter system for accumulated or
dishwasher overcrowded.
deposited food or detergent. Load dishwasher
correctly. Keep filter system clean.
Small particles
(food or
Insufficient water fill.
Check mains water pressure
detergent) left
on items
Use powder detergent within one to two months after
purchase. Open one box at a time. Always close
pouring spout after each use. Store in a cool, dry
place.
Powder detergent stored
too long or under adverse
conditions.
Rinse aid supply depleted.
Add rinse aid to the dispenser.
23
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove spots with silver polish. Rewash. Wash soon
after use, or pre-wash items if they will not be washed
right away. Do not overload cutlery basket. Avoid
spilling or pouring detergent directly on flatware. Make
sure dispenser cup is properly closed.
Prolonged contact with salty
or highly acidic foods or
with undissolved or highly
concentrated detergent.
Pitting of
stainless steel
items
Load so that all items are properly tilted for good
drainage. Avoid nesting of dishes and/or silverware.
Improper loading.
Dishes not dry
Rinse aid supply depleted.
Add liquid rinse aid .
The condition may not always be preventable. To
minimize the possibility of etching, use minimum
amount of detergent.
A water or chemical reaction
with some glassware. Usually
caused by some combination
of soft or softened water and
alkaline washing solutions
reacting with the glassware.
Can be accelerated by poor
rinsing, overloading and
Scratches on
glassware
Use of the appropriate programme.
Use of a rinse aid may also help.
excessive temperature.
If using powder detergent,
there may be dampness in the
dispenser.
Make sure dispenser is dry before adding powder
detergent. Start dishwasher immediately.
If using gel detergent, the
detergent may be left in
dispenser too long before
using.
Start dishwasher soon after adding gel detergent. Do
not allow detergent to dry out in dispenser.
Detergent
cakes in
detergent
dispenser.
Do not overfill. Cover should close tightly. Check
cover for fit.
Faulty cover.
Improper loading.
Do not place large items in front of dispenser.
Use detergent within one to two months of purchase.
To assure freshness, buy detergent as needed and
no more than one or two at a time. Store in a cool, dry
place.
Old detergent.
Chipping and
breakage of
dishes/glasses
Load with care following the instructions for use.
Place glassware so it does not touch the other dishes.
Remove from dishwasher carefully.
Improper loading.
Use the pre-wash cycle at least once a day until a
load accumulates, or hand rinse dishes before loading
dishwasher.
Dishes washed only every two
or three days.
Odour in
dishwasher
A dirty filter system may
contribute to a bad odour.
Clean filter system.
24
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Loss of frozen food in freezers
or fridge/freezers. (Food loss
insurance is often included within
your household contents insurance
policy, or may be available
Guarantee for Refrigeration,
Cooking Appliances, Washing
Machines & Dishwashers.
separately from your retailer).
Important notes.
Your new Beko product is guaranteed
against the cost of breakdown repairs
for one year from the date of the
original purchase.
•
Your Beko product is designed and
built for domestic household use
only.
•
The guarantee will be void if the
product is installed or used in
commercial or non-residential
domestic household premises.
The product must be correctly
installed, located and operated in
accordance with the instructions
contained in the User Instructions
Booklet provided.
What is covered?
•
Repairs necessary as a result
of faulty materials, defective
components or manufacturing
defect.
•
•
•
•
The cost of functional replacement
parts, but excluding consumable
items.
The labour costs of a Beko
approved repairer to carry out the
repair.
Professional installation
by a qualified Electrical
Domestic Appliance Installer is
recommended for all Washing
Machines, Dishwashers and
Electric Cookers
What is not covered?
•
Transit, delivery or accidental
damage or misuse and abuse.
Cabinet or appearance parts,
including knobs, flaps, handles or
container lids.
•
•
Gas Cookers must only be
installed by a Gas safe (or BORD
GAIS) registered Gas Installer.
The guarantee is given only within
the boundaries of the United
Kingdom and the Republic of
Ireland.
•
•
•
Accessories or consumable items
including but not limited to, ice
trays, scrapers, cutlery baskets,
filters and light bulbs.
Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
•
The guarantee is applicable
only to new products and is not
transferable if the product is
resold.
•
•
Beko disclaims any liability for
incidental or consequential
damages.
The guarantee does not in anyway
diminish your statutory or legal
rights.
•
Repairs to products used on
commercial or non-residential
household premises.
25
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The product guarantee does not
cover damages to plates,glass
ware, cutlery, crockery and also
damage to the product itself as
a result of using these “Three-in-
one”, “Two-in-one” detergents.
Before requesting service please
check the trouble-shooting guide
in the Operating Instructions as a
charge may be levied where no fault
is found even though your product
may still be under guarantee.
Please keep your purchase receipt
or other proof of purchase in a
safe place; you will need to have it
should the product require attention
under guarantee.
Service once the manufacturers
guarantee has expired.
If you have purchased an extended
guarantee please refer to the
instructions contained within the
extended guarantee agreement
document. Otherwise please call the
appropriate number above where
service can be obtained at a charge.
You should also complete the details
below; it will help us assist you when
requesting service. (The model
number is printed on the Instruction
Booklet and the serial number is
printed on the Rating Label affixed to
the appliance)
Should you experience any difficulty
in obtaining service please contact the
Beko Customer Help-Line.
Model No:
Tel: 0845 6004911
Serial No:
e-mail: [email protected]
Retailer:
Date of purchase:
Beko plc, Beko House, Caxton Way,
Watford, Herts, WD18 8UF
For service under guarantee simply
telephone the appropriate number
below
UK Mainland & Northern Ireland
Fridges & Freezers
Electric Cookers
0845 6004903
0845 6004902
Gas&Dual Fuel Cookers 0845 6004905
Washing Machines
& Dishwashers
0845 6004906
Republic of Ireland
All Refrigeration, All Cookers
01 862 3411
Washing Machines & Dishwashers
17 9425 0100 Revision: AA-04/12
Download from Www.Somanuals.com. All Manuals Search And Download.
������������������������������������������������������������������
Download from Www.Somanuals.com. All Manuals Search And Download.
�����������������������������������������������������������������������������������������
|