Datasheet | Switches
AT-8000S/24POE
Layer 2 Stackable Fast Ethernet Switch
AT-8000S/24POE
Secure Management
Key Features
24 port stackable 10/100TX Power over
Ethernet switch with 2 active SFP bays
(unpopulated) and 2 standby 10/100/1000T
ports (RJ-45)
Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.
Easy,Well Known Management
• Industry standard CLI
• Simple intuitive, fully featured AlliedTelesis
Web Interface
Overview
• Secure encrypted Web and CLI management
with SSHv2 and SSL
• SNMP
One of a series of stackable switches from
AlliedTelesis, the AT-8000S/24POE provides
high performance Layer 2 switching in an
affordable fixed configuration platform
combined with Power over Ethernet to provide
power to edge devices including IP phones and
wireless access points.This switch offers 24
10/100 ports, two fixed SFP Combo slots plus
two integrated stacking connectors that deliver
a total of 4Gbps stacking bandwidth.The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher port density
applications.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a pre-
determined part of your network offering guests
such benefits as Internet access while ensuring
the integrity of your private network data.
• Two level access privileges
Power over Ethernet
• Provides standards-based IEEE 802.3af
Power over Ethernet to all 24 10/100 ports
• Support for up to 24 class 2 powered
devices at 7.3 watts
• Support for up to 12 class 3 powered
devices at 15.4 watts
Gigabit and Fast Ethernet SFP
Support
Affordable Truly Stackable 10/100 Switching
Platform
All switches in the 8000S family support both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs).This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased-in over time.The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Support for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.
• Single IP address stack management
• 4G resilient ring stacking architecture
• Across stack link aggregation
• Across stackVLAN configuration
• Across stack port mirroring
• Redundant standby stack master
Combined Ethernet and Power for
Branch Office and Wiring Closet
Connectivity
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices where power is
needed for remote devices.The state-of-the-art
QoS capability of this product ensures reliable
delivery of advanced network services such as
voice while effectively controlling the continually
increasing traffic needs found in today’s networks.
All the QoS Needed in the Wiring Closet for
Today’sVoice and Data Networking
• Eight priorities assigned to four queues
• IEEE 802.1p for Layer 2 QoS
• DSCP (DiffServ) for Layer 3 QoS
• IEEE 802.1p to DSCP remarking traffic ready
for transport to the Layer 3 core of the
network
Easy Access Networking
• Layer 2 and Layer 3 ACL
Featuring an industry standard CLI and Allied
Telesis’ intuitive yet fully featured Web interface
the advanced features of the AT-8000S/24POE
are accessible to a wide range of system
administrators.The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
Securing the Network at its MostVulnerable
Point
• IEEE 802.1x and RADIUS network login: for
advanced control of user authentication and
accountability
• GuestVLAN: to ensure visitors or unauthorized
users connect only to services defined by IT
e.g. Internet
• TACACS+: for ease of management security
administration
%
+
0
Power Supply Efficiency
• Layer 2 and Layer 3 ACL
• Port MAC address security options
Allied Telesis
Download from Www.Somanuals.com. All Manuals Search And Download.
Layer 2 Stackable Fast Ethernet Switch
AT-8000S/24POE |
Security
Environmental Specifications
Operating temp 0°C to 40°C (32°F to 104°F)
Ordering Information
Management security: username and password protection
SSHv2
SSLv3
RFC 1492
AT-8000S/24POE-xx
Telnet management
Web management
TACACS+
RADIUS Authentication
Port-based network access control
Dynamic VLAN1
Storage temp
-25°C to 70°C (-13°F to 158°F)
24 port stackable 10/100TX PoE Layer 2 switch with
2 active SFP bays (unpopulated) and 2 standby
10/100/1000T ports (RJ-45)
Relative humidity 10% to 90% non-condensing
Storage humidity 5% to 95% non-condensing
Operating altitude Maximum 3,000m (9,843ft)
RFC 2138
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
Where xx = 10 for US power cord
20 for no power cord
RADIUS accounting1
Multi-session mode1
Action on violation1
Single-host violation1
Guest VLAN timeout1
Authentication not-required1
Electrical/ Mechanical Approvals
30 for UK power cord
40 for Australian power cord
50 for European power cord
Safety
EMI
UL 1950 (UL/cUL), EN60950 (TUV)
FCC Class A, EN55022 Class A,
VCCI Class A, C-Tick,
EN61000-3-2, EN61000-3-3
EN55024
Immunity
Accessories
Small Form Pluggables (SFPs)
Security login banner1
Guest VLANs
RoHS compliant
RFC 2865
IEEE 802.1x port-based network
access control
AT-SPFX/2
Multi-mode Fiber, 2km, 100FX, SFP, 1310nm
Package Description
One AT-8000S/24POE switch
Power cord AC
MAC-based network access control
ACL - Access Control Lists
AT-SPFX/15
Single-mode Fiber, 15km, 100FX, SFP, 1310nm
Rack-mount kit
Rubber feet for desktop installation
RS232 management cable
Stacking cable
AT-SPFX/40
Single-mode Fiber, 40km, 100FX, SFP, 1310nm
Fault Protection
Broadcast storm control
Install guide and user guide in CD and at
AT-SPTX
Copper, GbE Small Form-factor Pluggable (SFP)
Power Characteristics
AT-SPSX
Voltage input
100-240V AC
Multi-mode Fiber, GbE Small Form-factor Pluggable (SFP)
850nm
Voltage output
Current
48vDC
Country of Origin
China
3.5A
Power consumption
Power supply efficiency
Heat dissipation
Clock frequency
Acoustic noise
236W2
AT-SPLX10
Single-mode Fiber, 10km, GbE SFP, 1310nm
72.67%
768.3 BTU/hour
166Mhz
50.8dB
AT-SPLX40
Single-mode Fiber, 40km, GbE SFP, 1310nm
AT-SPLX40/1550
Single-mode Fiber, 40km, GbE SFP, 1550nm
AT-SPZX80
Single-mode Fiber, 80km, GbE SFP, 1550nm
1
New feature on AT-S94 version 3.0.0.32
2 Worst case load condition for actual measured power on sample unit
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters |Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
© 2011 AlliedTelesis Inc.All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-000180 Rev. S
Download from Www.Somanuals.com. All Manuals Search And Download.
|