Alcatel-Lucent 1511 BA
BUSINESS ACCESS MULTIPLEXER | 2 MB/S 30 -CHANNEL PRIMARy R ATE MULTIPLEXER
The Alcatel-Lucent 1511 BA is a 2 Mb/s 30-channel multiservice access multiplexer, which can be used across
a wide range of companies for business access and utility network applications. It also provides grooming func-
tionalities for GSM and wireless local loop networks. For example, railway networks, pipelines for oil, gas and
water and power utilities use utility network applications with different sets of service requirements. Whereas
railway and pipeline installations require a linear or ring type of network with drop-and-insert functions, other
installations require a mesh type of network. For all of these applications the Alcatel-Lucent 1511 BA offers
the ideal solution.
Features
Benefits
• Channel bank for 30 x 64 kb/s channels
• 2 Mb/s G.703/G.704 aggregates
• Protection of business-critical services
with high reliability, APS and trail
protection
• Variety of tributary boards for voice,
• Ease of upgrading with a modular
architecture for rapidly growing
or changing networks
data and Ethernet
• Local or remote craft terminal and
centralized element management
platform
• Full software control of network
configuration, maintenance and
supervision
• Drop-and-insert facility at 64 kb/s
granularity
• Voice and data conference circuits
Network Element Management
• Built-in ringing generator and 12
or 16 kHz metering pulses for coin
boxes and private meters
Fast, efficient and flexible management
is the key to success for any network.
Alcatel-Lucent’s network management
software, based on ITU-T M.3010,
satisfies all three of these criteria in an
easy-to-learn and easy-to-use package.
Network management of all elements
in a system is performed from a single
terminal comprising a compatible PC
running Windows or a workstation
loaded with Alcatel-Lucent network
management software.
• Support for incorporation of PDH
terminal units for transport of E1
streams over optical fiber and cop-
per cable (G.shdsl)
• Automatic trail protection of N x
64 kb/s payload
• 48 V DC power supply or 110 V AC
or 220 V AC with optional battery
backup
• Redundant DC/DC or AC/DC
conversion
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1. Alcatel-Lucent 1511 BA User Interfaces
10/100 Mb/s
U (2Wire)
Ethernet
LAN
Remote 2x64 kb/s; 128 kb/s and A-LL
VAM
Uko (2Wire)
S0 (4Wire)
ISDN-BRA
ISDN-BRA
ab (2Wire)
PSTN/Hotline/Payphone
PABX
FE1 (G.703)
ab (2Wire)
1511 BA
Magneto Set
V.35/V.36/V.28/X.21
64 kb/s-LL and V.110 Subrate
64 kb/s-G.703
Co- and Contra 64 kb/s
V.35/V.36/X.21
Nx64 kb/s-LL
2Wire
Hifi-Audio
4/2Wire
Analog-LL Modem
Figure 2. Alcatel-Lucent 1511 Typical Applications
Main Office
Satellite Offices
ab HotLine
ab HotLine
ab PABX Line
Tie Line
1515 CXC
ab PABX Line
Tie Line
PABX
PABX
2 Mb/s
G.703
2 Mb/s
G.703
Server
LAN
LAN
Transport
64 kb/s
1511 BA
1511 BA
SCADA
Host
SCADA PLC
Controls
Alarms and Data
CCTV Camera
CCTV Monitor
and Control
Alcatel-Lucent 1511 BA | 2 Mb/s 30-Channel Primary Rate Multiplexer | Data Sheet
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
• -38.5 V to -72 V DC
• 110/220 V AC ± 20%
Automatic Protection Switch
Technical Specifications
The automatic protection switch (APS)
enables route protection on E1 level.
If used, the Alcatel-Lucent 1511 BA
transmits data via two different E1
routes. At the receive side, data coming
from the preferred route is used; if this
route fails, data is taken from the
other side.
Main Characteristics
• Compliant with all relevant ITU-T
recommendations including:
G.703, G.704, G.706, G.711, G.712,
G.732, G.784, G.823, G.826, V.28,
V.35, V.36, and X.21
Environment
> Operating temperature: -5 C to
+50 C (23 F to 122 F)
> Transport and storage temperature:
-40 C to +70 C (-40 F to +158 F)
Clock Synchronization
• Internal clock (50 ppm)
• Extracted from E1 port
• Compliant with:
¬ ETS 300 019-2-1
¬ ETS 300 019-2-2
¬ ETS 300 019-2-3
Ethernet Switching
• External via 2,048 MHz clock
(ITU-T G.703 § 10) or 64 kHz
(G.703 § 1.2.2)
On an E1 trail across multiple Alcatel-
Lucent 1511 BA multiplexers, a group
of 64-kb timeslots (N: 1...31) is reserved
to carry Ethernet frames. In each Alcatel-
Lucent 1511 BA, one 10/100Base-T LAN
board (LANtrib) can drop/insert its local
Ethernet traffic onto these reserved
timeslots. To connect multiple Ethernet-
based end devices, the LANtrib offers
five external RJ-45 interfaces. The
LANtrib also switches LANs across mul-
tiple and distinct Alcatel-Lucent 1511
BA multiplexers. Switching between
the local five Ethernet ports runs at
wire speed.
EMC
Clock and backup priority rules
are selectable via configuration
management.
• EMC on rack basis (EMC directive
89/336/EEG [EN 50081-1, EN
50082-1])
• EMC on subrack basis
(ETS 300-386-1)
Mechanical Design
• Uses same technology as the other
products in the Alcatel-Lucent
access product family
• Plug-in printed boards with Double
Euro format. State-of-the-art
components ensure low power
consumption and high reliability.
• Subracks (can be mounted in rack
or cabinet):
¬ T9 subrack: Width of 120 mm
(4.72 in.), 240 mm (9.45 in.),
360 mm (14.17 in.) or 480 mm
(18.89 in.)
¬ 19-in. subrack:
- height: 7U (1U = 44.45 mm,
1.75 in.)
- Can be mounted in a 300-mm
deep (11.81 in.) ETSI rack
• ETSI T9 and 19-in. racks:
¬ available in two heights:
2,200 mm (86.61 in.) (with six
Alcatel-Lucent 1511 BA subrack
mounting levels) and 1,800 mm
(70.87 in.) (with five mounting
levels)
• Cabinets: Both indoor and outdoor
variants available
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other
trademarks are the property of their respective owners. The information presented is subject to change
without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
© 2008 Alcatel-Lucent. All rights reserved. CAR9718080111 (02)
Download from Www.Somanuals.com. All Manuals Search And Download.
|