Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.3.2 Jpeg File Preview Setup ...............................................................................22
2.2.3.3 Language Selection Setup............................................................................22
2.2.3.4 Check Firmware Version...............................................................................22
2.3 Basic Screen Menu..................................................................................23
2.3.1 Media Type Selection .......................................................................................23
2.3.2 File Selection......................................................................................................23
2.4 Play Video Files ........................................................................................24
2.5 Play DVD Files...........................................................................................27
2.6 Play Music Files........................................................................................29
2.7 Play Photo Files........................................................................................31
2.8 Make a Play-List........................................................................................33
2.9 Remote Controls.......................................................................................34
2.10 Others .......................................................................................................35
2.10.1 Music Slide Show............................................................................................35
2.10.2 MP3 Quick Play...............................................................................................35
2.10.3 Change Background Image...........................................................................35
2.10.4 Change OSD Text Color ................................................................................35
2.10.5 Firmware Upgrade ..........................................................................................35
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Portable Mpeg4 Player is 2.5” HDD interface type of MPEG4 player based on USB 2.0 High Speed.
It can be connected to TV in home or a monitor. It is not only an external USB HDD but also the best portable AV
device that displays Music, Movie and photo.
¾ Digital Multimedia Player via Home TV or Car TV
¾ USB 2.0 External Storage via PC(NTFS, FAT32)
¾ Audio - Stereo, Digital Coaxial 5.1ch. Sound
¾ Video - Composite, HD Component 480p, 720p, 1080i
¾ DVD Manager - Playback of DVD File same as Original DVD Title
¾ Easy Firmware Upgrade.
Specifications
Product Name
Power
Portable Mpeg4 Plyaer
DC 5V / 2A
Weight
160g (without HDD) approx.
Dimension
Available OS
USB Interface
HDD Type
HDD File System
TV Type
80 x 148 x 24 mm approx.
Windows 98SE/ME/2000/XP, Mac OS 9.0 Higher, Linux 2.4 Higher
480Mbps USB 2.0 (USB 1.1 Compatible) / Slave
2.5” IDE HDD
NTFS / FAT32
NTSC / PAL
MPEG 1, 2, 4 (MPG, MPEG, AVI, M2V, DAT, VOB, IFO etc.)
Movie
DivX, XviD (except GMC, Qpel option applied)
Supported Format
Music
Photo
MP3, OGG Vorbis, WAV, WMA (except WMA9 pro.lossless)
JPG(JPEG)
COMPOSITE
Video Output
Audio Output
COMPONENT Y, Pb, Pr (480p, 720p, 1080i Progressive Scan)
STEREO L-R
DIGITAL COAXIAL (DTS Pass-Through Only)
External IR
Support (Optional)
0˚C ~ 60˚C
Working Temperature
Working Humidity
10% ~ 50%
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
▪ We strongly recommend you to back up the data to another safe media. We are not responsible for data damage or
loss in built-in HDD.
▪
▪
▪
▪
▪
▪
▪
▪
It’s better unplug the power adaptor when you do not use for a long time.
The Mpeg4 Player does not support the DivX, XviD codec of video files that has GMC, Qpel option.
The Mpeg4 Player supports only “Pass-Through” for DTS Audio codec.
Don’t power off while a file is playing.
If the length of USB cable is too long, it may not be connected smoothly (Recommend: up to 3 meters)
If you have USB 1.1 Host Adapter, Mpeg4 Player is working at USB1.1 speed. Mpeg4 Player
On less than 6GB HDD, data damage or loss may be caused. We recommend you to use more than 6GB HDD.
[Very Important] : If unformatted HDD is insert into Mpeg4 Player, a PC can not detect the HDD. Make sure that the
HDD is formatted.
Be careful of dropping or impact or shock. If a HDD is damaged by dropping, impacting, shocking, then contact
manufacturer or the seller.
We recommend you to use the all supplied cables or accessories that are customized for the best performance of
Mpeg4 Player. Using other cables or accessories may not support the best performance.
[Very Important] : Be away from water, heavy moisture. If Mpeg4 Player has a liquid, unplug from a PC or Power
right away. If you use Mpeg4 Player under this condition, the HDD may be fired or you may have electric shock.
▪
▪
▪
▪
▪
▪
▪
Don’t touch Mpeg4 Player by wet hands. It may cause electric shock.
Be away from heat, a direct ray of light.
Be away from devices that transmit strong magnetic signal. It may cause data damage or loss on HDD.
Don’t disassemble as the user’s own accord. It may cause Mpeg4 Player damaged or loose the data.
System Requirements
▪ Interface : 480Mbps USB 2.0 High-Speed (USB 1.1 compatible)
▪ Power Supply : USB Bus Power or DC Power
▪ Available OS : Windows 98SE/ME/2000/XP, MAC 9.0 higher, Linux 2.4 higher
▪ Available System : Desktop / Laptop PC that has USB port(s)
Package Content
Primary Package
▪
Mpeg4 Player ▪ Remote Control & Battery ▪ USB Cable ▪ AV Cable( Composite + Stereo L-R),
▪ Component Video Cable ▪ Coaxial Audio Cable ▪ Power Adapter ▪ Windows 98 Driver CD ▪ User Manual
Optional Package
▪ External Remote Control IR Receiver ▪ Cigar Jack Lighter
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
- Front View -
① Power
③ IR
④ IR Receiving Area
② HDD
① Power
Power LED
HDD LED
IR LED
Front
View
② HDD
③ IR
④ IR Receiving Area
IR receiving area for remote signals
- Back View -
① USB
② 5V
④ SD/HD
③ IR/5.1
⑤ AV
① USB
② 5V
Connect USB cable
Connect power Cable
Back
View
③ IR/5.1
Connect coaxial cable for 5.1 ch. digital audio output
(or Connect external remote control IR receiver)
④ SD/HD
⑤ AV
Connect component Y, Pb, Pr cable for video output
Connect AV cable for composite video and(or) Stereo audio output
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Use as External USB HDD
1.1 Insert Hard Disk
9 Use 2.5” IDE Hard Disk for Laptop(or Notebook) PC.
9 Hard Disk should be “Master”. However, if the Hard Disk supports “Single” mode, you need to try to set
“Single “mode.
① Grip the hasp and pull back
the front panel, and then open
the top cover.
② Pull the PCB out.
③ Grip HDD and insert it into
the pins of PCB (be sure to
match the 44 pins)
④ Screw HDD on PCB by using
the supplied screws.
⑤ Insert the PCB into the case,
and then close the top cover
and front panel.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Format Built-in HDD via USB
If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the
following guide. * If the hard disk drive is already formatted, see “1.3 Copy Data via USB”.
1.2.1 Windows 98SE, ME
1) Install Windows 98 Driver. Find the driver at
Windows 98 CD→Windows 98 Driver Directory.
After finishing installation, Connect Mpeg4 Player to
PC via USB cable. (If not detected, plug power
cable of Mpeg4 Player)
5) Select “5. Change current fixed disk drive” and
press [Enter].
2) Select [Start→Program→Accessories→MS-
DOS Prompt] on Windows.
3) Type “fdisk” command at Command Prompt
window and press [Enter].
6) Type the last Disk number in 0% usage.
4) Type the “Y” at the “Do you wish to enable large
disk support (Y/N)” and press [Enter].
7) Select “1. Create DOS partition or Logical DOS
Drive” and press [Enter].
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8) Select “ 1. Create Primary DOS Partition ” and
press [Enter].
11) Type the capacity or % which you want to use and
press [Enter].
12) Drive integrity verification will start again. After
finishing that, press [ESC] key when the “Primary DOS
Partition created, drive letters changed or added”
message displays.
9) Wait until finishing verifying the drive integrity.
13) Press [ESC] key again. “ Shut down Windows
before restarting” message will be displayed. Press
[ESC] key finally for exiting FDISK.
10) After finishing drive integrity verification, type “Y”
at “Do you wish to use the maximum available size for
a Primary DOS Partition (Y/N)”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
14) Type “ exit ” command at “ C:\WINDOWS> ” and
press [Enter] for returning to windows screen.
15) Unplug the Mpeg4 Player and plug again. New
volume will be appeared at [My Computer]. Click
mouse right button at the new volume and select
[Format].
1.2.2 Windows 2000
1) Connect Mpeg4 Player to PC via USB cable.
3) If the [Disk Signature and Upgrade Disk Wizard] is
started, click Next to progress for finishing the wizard.
If this wizard not started, right click the left area of
unallocated drive at no. 4 figure, and start the wizard.
(If not detected, plug power cable of Mpeg4 Player)
2) Select [Start → Settings → Control Panel →
Administrative Tools → Computer Management
→ Disk Management] on Windows.
4) After finishing the [Disk Signature and Upgrade
Disk Wizard], Right-click the Unallocated Drive. And
then, click [Create Partition].
Right Click for
starting Disk
Wizard.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Click [Next] at the Create Partition Wizard
Windows.
9) Choose FAT32 or NTFS at File system to use and
click [Next].
6) Check [Primary Partition] and click [Next].
9
FAT 32 system is available on windows
98SE/ME/2000/XP, but NTFS system is available on
windows 2000/XP only.
7) Type number that you want to use and click [Next].
9 If you choose FAT32 system on Windows 2000/XP,
one drive letter’s maximum size will be limited to 32GB. If
you want to use one drive letter of 32GB more, you have
to format on windows 98SE/ME.
9 If you want to create two or more partition with one
disk drive, it will be recommended “Primary Partition”
10) After finishing Wizard setup, formatting will be
progressed automatically.
8) Assign a drive letter and click [Next].
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.3 Windows XP
1) Connect Mpeg4 Player to PC via USB cable.
6) Check [Primary Partition] and click [Next].
7) Type number that you want to use and click [Next].
8) Assign a drive letter and click [Next].
(If not detected, plug the power cable of Mpeg4 Player)
2) Click [Settings→Control Panel→ Administrative
Tools→Computer Management→Disk Management]
on Windows. If you can not find Administrative Tools
at Control Panel, click “ switch to classic view” in
left – up corner on screen.
3) If the [Disk Signature and Upgrade Disk Wizard]
starts, click [Next] to progress for finishing the wizard.
If this wizard not started, right click the marked left
area of unallocated drive at no 4. figure and start the
wizard.
4) After finishing the [Disk Signature and Upgrade
Disk Wizard], Right-click the ‘Unallocated’ Drive. And
then, click [Create Partition].
Right Click for
starting Disk
Wizard.
5) Click [Next] at the New Partition Wizard.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
9) Choose FAT32 or NTFS at File system to use and
click [Next].
9
FAT 32 system is available on windows
98SE/ME/2000/XP, but NTFS system is available on
windows 2000/XP only.
9 If you choose FAT32 system on Windows 2000/XP,
one drive letter’s maximum size will be limited to 32GB. If
you want to use one drive letter of 32GB more, you have
to format on windows 98SE/ME.
9 If you want to create two or more partition with one
disk drive, it will be recommended “Primary Partition”
10) After finishing Wizard setup, formatting will be
progressed automatically.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 Copy Data via USB
It is possible to use as a external USB hard disk drive.. You can copy data from your PC to built-in HDD of Mpeg4
Player via USB. It is possible to play media files at the hard disk on TV set.
* If not detected when connecting PC, recommend to connect power cable of Mpeg4 Player.
1.3.1 Windows 98SE
9First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD > Windows 98
Driver Directory. After finishing installation, Connect Mpeg4 Player to PC via USB cable. If not detected, plug power cable of
Mpeg4 Player.
1) After installing the driver, connect Mpeg4 Player.
And then, check the driver installation at Windows
[Start→Settings→Control Panel→System →Device
Manager→Hard disk controllers→Hi-Speed USB-IDE
Bridge Controller].
3) After copying data, remove Mpeg4 Player with
using remove icon
at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
9If a new volume is not be appeared, check HDD format or
not, and HDD file system. Windows 98SE only detect FAT32
file system. Or connect power cable of Mpeg4 Player.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.2 Windows ME
1) After connecting Mpeg4 Player, windows itself will
install driver automatically. And then, check the driver
installation at Windows [Start > Settings > Control
Panel > (view all Control Panel options) > System >
Device Manager > Universal Serial Bus controllers >
USB Mass Storage Device]
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
9If a new volume is not be appeared, check HDD format
or not, and HDD file system. Windows ME only detect
FAT32 file system. Or connect power cable of Mpeg4
Player.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.3 Windows 2000, XP
1) After connecting Mpeg4 Player, windows itself will
install driver automatically. And then, check the driver
installation at Windows [Start > Settings > Control
panel > (switch to classic View on Windows XP) >
system > Hardware > Device manager > Universal
Serial Bus controllers > USB Mass Storage Device ].
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
9When you see ‘Non High-Speed USB Hub Message’
The message will be displayed On windows XP when
you plug Mpeg4 Player into USB 1.1 spec. Host adapter.
9If new volume is not be appeared, check HDD format
or not. and HDD file system. Windows 2000, XP detect
both FAT32 and NTFS file system. Or connect power
cable of Mpeg4 Player.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.4 Linux
9It can be available on Linux 2.4 higher.
[Automatic Mount]
After booting, do log-in.
Connect Mpeg4 Player -> Power On Mpeg4 Player -> Check the detection with [fdisk] -> make Mount Pointer (ex.
mediatest) at Folder Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
/dev/sda /mnt/mediatest vfat noauto, user 0 0 (in case of FAT32 HDD)
/dev/sda /mnt/mediatest ntfs noauto, user 0 0 (in case of NTFS HDD)
Do Log-in again.
9above example “sda” is assumed that the Mpeg4 Player will be detected as “sda” on your system. If not, you have to write the
drive name which is detected as “USB Mass Storage”, not “sda”
[Manual Mount]
Connect Mpeg4 Player -> Power On Mpeg4 Player -> Check the detection with [fdisk] -> make Mount Pointer (ex.
mediatest) at Folder Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
mount –t vfat /dev/sda /mnt/mediatest (in case of FAT32 HDD)
mount –t ntfs /dev/sda /mnt/mediatest (in case of FAT32 HDD)
9above example “sda” is assumed that the Mpeg4 Player will be detected as “sda” on your system. If not, you have to write the
drive name which is detected as “USB Mass Storage”, not “sda”
[How to stop using]
Do [unmount] at Device Control.
1.3.5 Mac
9It can be available on Mac 9.0 higher.
No need to install the installation driver at Mac OS 9.x version and the Mpeg4 Player will be detected automatically. If
the Mpeg4 Player is detected correctly, an icon is appeared at a monitor.
When removing Mpeg4 Player safely, drag the icon to a trash and unplug Mpeg4 Player.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use as Multimedia Player
2.1 Connect to External AV Device
2.1.1 Connect Video Cable
Mpeg4 Player supports 2 type of video output; “Composite, Component”. Use video connection that your TV supports.
Normally, TV supports composite video connection. Do not connect USB cable when connecting TV.
•Component Y, Pb, Pr •
•Composite•
: Connect to SD/HD jack of Mpeg4 Player.
: Connect to AV jack of Mpeg4 Player.
Supplied
Component
Cable
Supplied
AV Cable
Blue
Red
Green`
Yellow
White
Red
[Blue]Connect to Pb jack of TV.
[Green]Connect to Y jack of TV.
[Yellow] Connect to Composite(CVBS) jack
of TV.
[Red] Connect to Pr jack of TV.
9 When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user
manual.
2. “Mpeg4 Player” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output
signal is changed.
3. After you see normal screen, you have to save video configurations of Mpeg4 Player. See “2.2.1 Video Setup”.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1.2 Connect Audio Cable
Mpeg4 Player supports 2 type of audio output; “Stereo, Coaxial”. Use audio connection that your TV or Audio set
supports. Do not connect USB cable when connecting TV.
•Coaxial: Digital 5.1 Ch. •
•Stereo•
: Connect to IR/5.1 jack of Mpeg4 Player.
: Connect to AV jack of Mpeg4 Player.
Supplied
AV Cable
Supplied
Coaxial
Cable
Connect to Coaxial jack of Amplifier
or Receiver.
Yellow
White
Red
Connect to Audio Jacks of TV
White = L (Left) Audio Input / Red = R (Right) Audio Input
9When you can not hear sound after connecting Coaxial Cable, you have to change audio setup of Mpeg4 Player as Encoded
Digital. See “2.2.2 Audio Setup”
2.1.3 Connect External IR Receiver
External IR Receiver is optional package, not primary one.
Connect the external IR receiver to IR/5.1 jack of Mpeg4 Player instead of Coaxial cable. External IR Receiver and
Coaxial cable are not used at the same time.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Basic Setup
2.2.1 Video Setup
This is guide for setting video output of Mpeg4 Player. You have to setup Mpeg4 Player’s video output mode same as
TV set’s video input mode.
9When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user
manual.
2. “Mpeg4 Player” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output
signal is changed.
3. After you see normal screen, you have to save video configurations of Mpeg4 Player.
TV Video
Mpeg4 Player Video
Output Mode
Connection Jack
Video Cable Type
Input Mode
of TV, Mpeg4 Player
TV Out: NTSC C/S-Video
(HD Component OFF)
TV Out: PAL C/S-Video
(HD Component OFF)
CVBS or Composite Jack
(Generally Yellow Jack)
Normal Video
S-Video
Supplied AV Cable
Not supported
Not supported
-
-
TV Out: NTSC C/YPbPr
(HD Component OFF)
TV Out: PAL C/YPbPr
(HD Component OFF)
Component 480i
Component 3 Jack
Supplied Component Cable
* Y(Green), Pb(Blue), Pr(Red)
* Y(Green), Pb(Blue), Pr(Red)
Component 480p
Component 720p
Component 1080i
HD Component Out On 480p
HD Component Out On 720p
HD Component Out On 1080i
9NTSC, PAL : Standard of TV Output. Select a proper one for using in your country.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
< Setup Procedure>
① Turn on Mpeg4 Player and press [SETUP] on
MediaType Selection screen.
② Move to ‘Video Setup’ icon and press
[ENTER].
③ Move to Video Output Mode that you want
and press [ENTER].
④
Finally, press [SETUP] again for saving
configurations.
Example of component video output settings.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.2 Audio Setup
This is guide for setting audio output of Mpeg4 Player. You can use Stereo or Digital 5.1 ch..
9Analogue/DCPM: Select when you connect the supplied AV cables (Red / White) to TV or Audio set directly.
9Encoded Digital: Select when you want to listen through 5.1Ch by connecting receiver (or amplifier) with supplied coaxial
cable.
<Setup Procedure>
① Turn on Mpeg4 Player and press [SETUP] in
②
Move to ‘Audio Setup’ icon and press
MediaType Selection screen.
[ENTER].
③ Move to Audio Output Mode that you want
and press [ENTER].
④ Finally, press [SETUP] again for saving
configurations.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.3 Other Setup
This is guide for setting TV Type, JPEG File Preview, Language Selection. In addition, current firmware version shows.
<Setup Procedure>
① Turn on Mpeg4 Player and press [SETUP] in
②
Move to ‘Other Setup’ icon and press
MediaType Selection Screen.
[ENTER].
③ Move to settings that you want and press
[ENTER].
④
Finally, press [SETUP] again for saving
configurations.
2.2.3.1 TV Type Setup
Select one among 4:3 Letter Box, 4:3 Pan Scan, or 16:9.
2.2.3.2 Jpeg File Preview Setup
It is possible to enable or disable preview the photo file as a thumbnail image before playing.
2.2.3.3 Language Selection Setup
Select one language among English, German, Spanish, French, Italian, Portuguese, Danish, Swedish, or Dutch. User
interface language will be changed according to the language.
2.2.3.4 Check Firmware Version
Current Firmware version will be displayed on the Other Setup screen.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Basic Screen Menu
2.3.1 Media Type Selection
After turning on Mpeg4 Player, you can see MediaType Selection screen. In this screen, you can select “Video”, “Audio”, Photo”
or make “Play-List” with ◀▶ arrow button. Press [ENTER]. Select one media type that you want to play.
2.3.2 File Selection
After selecting a Media type, ‘File Selection’ screen will be displayed. Move to a file that you want to play and press
[ENTER] or [PLAY/PAUSE].
☞
☞
☞
☞
☞
[ENTER] button
Play one file that you select. After finishing playback, return to ‘file selection screen’.
[PLAY/PAUSE] button After playing the file that you select, play next all files continuously.
▲▼ button
◀ button
Move to files with pressing ▲▼arrow buttons.
Move to left icon with pressing ◀arrow button. Press ▶button in order to return to file selection screen.
NEXT▶▶I, PREV I◀◀ button Move to Next or Previous page when there is too many files to list on one screen.
☞ Left Icon Descriptions
Play All
After the file that you select, play next all files continuously. It is same as
[PLAY/PAUSE] button.
Media Select
Go to Media Type Selection directly.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Play Video Files
It is possible to play video files like AVI, MPG, MPEG, DAT, M2V, and VOB.
Select ‘Video’ icon in Media Type Selection screen. Video file list will be displayed. Just move to a file and press
[ENTER] or [PLAY/PAUSE] button.
Select ‘Video’ icon in Media Type Selection screen.
Move to a file and press [ENTER] or [PLAY/PAUSE]
button. Press [ENTER] for playing just the file or
[PLAY/PAUSE] for playing all files from the selected file.
< Function and Button Descriptions>
Remote Control
AUDIO
Function
Descriptions
It is possible to switch each audio language when the audio
format is dual-audio, for example, including a local language
and English.
Dual Audio
It is possible to change subtitle size and location.
◀▶ arrow button changes size and ▼▲ arrow button
changes location. After doing, press [ENTER].
Subtitle
SUBTITLE
Move& Size
The subtitle name same as video file is displayed on screen
automatically. However, it is possible to open the other
preferable subtitle files or hide.
Subtitle
Select or Hide
24
Download from Www.Somanuals.com. All Manuals Search And Download.
It is possible to switch each subtitle language when the
subtitle is dual language format, for example, including a
local language and English.
Subtitle
Language Select
*
When selecting ‘Discriminating subtitle language’, first subtitle
language will be displayed.
It is possible to set the subtitle sync. with ◀▶(one second)
▼▲(60 second) when motion and subtitle sync is not
matched.
Subtitle
Sync.
4, 5, 6
Subtitle
Color Change
Zoom Vertical
Zoom Full
Custom
Subtitle color is changed when pressing number 4, 6 button.
In order to return default color (white), press number 5.
Zoom screen vertically.
Number Button
Enlarge the overall screen.
Enlarge or reduce the screen by ▲▼◀▶ arrow buttons.
Return to original screen size and position.
Move the screen to the direction with ▼▲◀▶ arrow
buttons. Press [Brt.Cont] key for returning to the original
screen position when applying Screen position.
Scr. SIZE
Default
Screen Position
Jump to
Preferable
TIME SEARCH
CANCEL
Move to a selected time of a file.
Playback Time
Delete Input
Numbers
In time search box, this button deletes all numbers in 0.
Control luminosity,
color depth,
When pressing this button, 3 modes switch. After selecting
Brt. CONT
FILE INFO
a mode, change settings with ◀▶ arrow buttons.
brightness
Show File
Show the file information which is being played. In order to
hide the information, press this button again.
Whenever pressing this button, play speed is changed with
8x, 16x, 32x in forward.
Information
FF ▶▶
▶ arrow button
REW ◀◀
Fast Forward
Rewind
Whenever pressing this button, play speed is changed with
8x, 16x, 32x in backward.
◀ arrow button
VOLUME +
Volume Up
Volume Down
Sound Off
Volume up.
▲arrow button
VOLUME -
Volume down.
▼arrow button
Mute the sound. In order to hear sound, press this button
MUTE
again.
Play a file. After finishing playback, return to file selections
screen.
ENTER
Playback a File
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY / PAUSE
▶II
Playback
After the file that you select, play next all files continuously. It
is same as [PLAY/PAUSE] button.
Next All Files
PLAY / PAUSE
▶II
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Play a previous file before a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
Pause
PREV
Playback
I◀◀
Previous File
Play a next file after a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
NEXT
Playback
Next File
▶▶I
0
If a frame of a video file is broken, green color runs on a
overall screen. Press number [o “Zero”] for screen reset.
Screen Reset
Number button
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 Play DVD Files
DVD manager function support to play DVD Ripping File same as original DVD.
Make a folder and then save all ripping files into the folder. After connecting TV(or Monitor), select VIDEO_TS.IFO file
at the folder. Make sure that all the ripping files including VIDEO_TS.IFO from one DVD title will be located at one
folder.
9If you can not find VIDEO_TS.IFO file among all the ripping files from an original DVD title, DVD manager function will not
work.
Select ‘Video’ icon in Media Type Selection screen.
Move to the folder including DVD ripping files and select
‘video_ts.ifo’ file and press [ENTER] button.
< Function and Button Descriptions>
Remote Control
Function
Description
AUDIO
SUBTITLE
Scr. SIZE
MENU
Select Audio Type
Audio type will be changed whenever pressing this button.
Select Subtitle Type Subtitle type will be changed whenever pressing this button.
Screen Size
Go to Menu
Screen size will be changed when press the button.
Move to main menu while playing DVD.
Play slowly 1/2x, 1/4x, and 1/8x whenever pressing this
button.
SLOW
Playback Slow
Chapter, Title
Repeat
REPEAT
Set chapter, title repeat.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
A-B REPEAT
TITLE
A-B repeat
Go to Title Menu
Angle
Set the A-B repeat.
Move to title menu while playing DVD.
Apply angle function.
ANGLE
Show File
Show the file information which is being played. In order to
hide the information, press this button again.
FILE INFO
TIME SEARCH
CANCEL
Information
Jump to Preferable
Playback Time
Delete Input
Numbers
Move to a selected time of a file.
In time search box, this button deletes all numbers in 0.
Control luminosity,
color depth, brightness
Playback
When pressing this button, 3 modes switch. After selecting
Brt. CONT
a mode, change settings with ◀▶ arrow buttons.
PREV
I◀◀
Play a previous chapter.
Play a next chapter.
Previous Chapter
Playback
NEXT
▶▶I
Next Chapter
FF
Whenever pressing this button, play speed is changed with
8x, 16x, 32x, 48x in forward.
Fast Forward
▶▶
REW
Whenever pressing this button, play speed is changed with
8x, 16x, 32x, 48x in backward.
Rewind
Playback
Pause
◀◀
ENTER
PLAY / PAUSE
▶II
Play ‘Video_ts.ifo’ file.
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Volume up.
VOLUME +
VOLUME -
Volume Up
Volume Down
Volume down.
Mute the sound. In order to hear sound, press this button
again.
MUTE
Sound Off
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6 Play Music Files
It is possible to play music files like MP3, OGG, WAV, WMA.
Select Audio icon in Media Type Selection screen. Music file list will be displayed. Just move to a file and press
[ENTER] or [PLAY/PAUSE] button.
Select ‘Audio’ icon in Media Type Selection screen.
Move to a file and press [ENTER] or [PLAY/PAUSE]
button. Press [ENTER] for playing just the file or
[PLAY/PAUSE] for playing all files from the selected file.
< Function and Button Descriptions>
Remote Control
FILE INFO
Function
Description
Show File
Information
Show the file information which is being played. In order to
hide the information, press this button again.
Jump to Preferable
Playback Time
Delete Input
TIME SEARCH
CANCEL
Move to a selected time of a file.
In time search box, this button deletes all numbers in 0.
Numbers
Control luminosity,
color depth, brightness
When pressing this button, 3 modes switch. After selecting
a mode, change settings with ◀▶ arrow buttons.
Play a previous file before a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
Brt. CONT
PREV
Playback
I◀◀
Previous File
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Play a next file after a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
NEXT
Playback
Next File
▶▶I
FF
Go to 10 Sec. in
Forward
Go to 10 sec. in forward and play when a file is being played.
▶▶
REW
◀◀
Go to 10 Sec. in
Backward
Go to 10 sec. in backward and play when a file is being
played.
Play a file. After finishing playback, return to file selections
screen.
ENTER
Playback a File
PLAY / PAUSE
▶II
Playback
After the file that you select, play next all files continuously. It
is same as [PLAY/PAUSE] button.
Next All Files
PLAY / PAUSE
▶II
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Volume up.
Pause
VOLUME +
VOLUME -
Volume Up
Volume Down
Volume down.
Mute the sound. In order to hear sound, press this button
again.
MUTE
Sound Off
It is possible to show mp3 subtitle which the mp3 file
supports subtitle. In that case, this button will hide the
subtitle.
SUBTITLE
Hide Mp3 Subtitle
* mp3 subtitle supported file must be made by iriver caption editior
program, not support LDB program.
9How to Play MP3 without TV set. MP3 Quick Play
Make a 'music' folder (in a small letter not a capital letter) at root directory of built-in HDD and save MP3 files at the folder. If the
HDD is divided into two or more partitions, make a 'music' folder at first partition.
Turn on Mpeg4 Player and just press [PLAY/PAUSE] button. MP3 files at 'music' folder will be played automatically. Additionally,
after rebooting Mpeg4 Player, the last played file will be continued to play.
9How to See MP3 Subtitle
It is possible to show MP3 subtitle which the MP3 file supports subtitle. MP3 subtitle supported file must be made by ‘iriver
caption editior’ program, not support LDB program.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
2.7 Play Photo Files
It is possible to play photo files like JPG(JPEG).
Select Photo icon in Media Type Selection screen. Photo file list will be displayed. Just move to a file and press
[ENTER] or [PLAY/PAUSE] button.
Select Picture icon in Media Type Selection screen.
Move to a file and press [ENTER] or [PLAY/PAUSE]
button. Press [ENTER] for playing just the file or
[PLAY/PAUSE] for playing all files from the selected file.
< Function and Button Descriptions>
Remote Control
FILE INFO
Function
Description
Show File
Show the file information which is being played. In order to
hide the information, press this button again.
Play a previous file before a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
Information
PREV
Playback
I◀◀
Previous File
Play a next file after a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
NEXT
Playback
Next File
▶▶I
Play a file. After finishing playback, return to file selections
screen.
ENTER
Playback a File
31
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY / PAUSE
▶II
Playback
After the file that you select, play next all files continuously. It
is same as [PLAY/PAUSE] button.
Next All Files
PLAY / PAUSE
▶II
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Pause
FF
Zoom In
Enlarge a photo.
▶▶
REW
Zoom Out
Rotation
Panning
Reduce a photo.
◀◀
ANGLE
방향키
▲▼◀▶
ENTER
Rotate a photo.
Move the position of photo.
ReturntoOriginalPhoto
Control luminosity,
Return to original photo.
When pressing this button, 3 modes switch. After selecting a
mode, change settings with ▲▼ arrow buttons.
Brt. CONT
color depth, brightness
9 Photo Slide Show
If you play all files with 'Play All' icon or [PLAY/PAUSE], photo slide shows will be started.
9 Music Slide Show
Make a 'music' folder (in a small letter not a capital letter at root directory) of built-in HDD and save MP3 files at the folder. If the
HDD is divided into two or more partitions, make a 'music' folder at first partition.
When you play one or all photo files, you can listen mp3 and see photo slide show together.
9Photo Preview On, Off
It is possible to enable or disable preview the photo file as a thumbnail image before playing at Other Setup screen.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
2.8 Make a Play-List
User can register all media type of files like video, music, and photo to play-list. The registered media files to play-list
will be played without discriminating media type.
9It is not possible to play each registered files independently. Use 'Play All, Random Play' icon or [PLAY/PAUSE] button.
Additionally, registered play-list will be deleted after rebooting.
① Select Play List icon in Media Type Selection screen.
② Move to a file and press [ENTER] for adding to Play-
List. After adding, press ◀ for moving to Left Icon.
Move to 'Display' icon and press [ENTER].
③ Play-List screen appears. You can see just added
files. Play as followings,
- Play All icon: play in order from selected file.
- Random Play icon: play in random.
- Play/Pause button: play in order from selected file.
* In order to move up to Left Icon, press [◀] button.
* Delete All icon means to delete all the added files.
* In order to delete a added file, move to a file on Play-List screen and press [ENTER] twice.
* In order to change location among added files, move to a file which you want to move and press [ENTER] and then
move to the other file where you want to add and press [ENTER].
33
Download from Www.Somanuals.com. All Manuals Search And Download.
2.9 Remote Controls
This is guide for basic use of remote control. For more details, ‘2.3 Basic Screen Menu’, ‘2.4 Play Video Files’, ‘2.5 Play
DVD Files’, ‘2.6 Play Music Files’, ‘2.7 Play Photo Files’, ‘2.8 Make a Play-List’.
POWER Turn On / Off SETUP Go to Setup Screen.
MENU Go to DVD MainMenu
TITLE Go to DVD Title Menu ANGLE DVD Angle, Photo Rotation
REPEAT Set DVD Chapter, Title Repeat A-B REPEAT Set DVD A-B Repeat
SLOW PlayDVD Slowly
ENTER Playa File
▲▼◄► Arrow Key
FILE INFO Show File Info
TIME SEARCH Jump to Specific playtime
Brt.CONT Set Luminosity, Color Depth, Brightness
MEDIA TYPE Go to Media Type Selection Screen
MAIN PAGE Go to Media Type Selection Screen.
PLAY/PAUSE Playnext all files
Pause
STOP Stop Play
VIDEO Change Video Output Mode
REW PlayFaster in Backward
AUDIO Change Audio Type of Video, DVD file
FF PlayFaster in Forward.
SUBTITLE Subtitle Settings
PREV Go to Previous Page
Scr. SIZE Screen Size Settings
PlayPrevious File in PlayAll
NEXT Go to Next Page
PlayNext File in PlayAll
How to Insert/Change Battery
① Pull off the battery tray for remote controller’s body completely. ② Put the enclosed battery on the tray. ③ Insert the tray into
remote controller’s body completely.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2.10 Others
2.10.1 Music Slide Show
Make a 'music' folder (in a small letter not a capital letter) at root directory of built-in HDD and save MP3 files at the
folder. If the HDD is divided into two or more partitions, make a 'music' folder at first partition.
When you play one or all photo files, you can listen mp3 and see photo slide show together.
2.10.2 MP3 Quick Play
This is for listening MP3 files without TV set.
Make a 'music' folder (in a small letter not a capital letter) at root directory of built-in HDD and save MP3 files at the
folder. If the HDD is divided into two or more partitions, make a 'music' folder at first partition.
Turn on Mpeg4 Player and just press [PLAY/PAUSE] button. MP3 files at 'music' folder will be played automatically.
Additionally, after rebooting Mpeg4 Player, the last played file will be continued to play.
2.10.3 Change Background Image
It is possible to change a background image on Mpeg4 Player. Save ‘mybg.jpg’ at root directory of built-in HDD.
Background image will be changed as ‘mybg.jpg’.
* Recommend to use 720x480 pixels image.
2.10.4 Change OSD Text Color
Press number 1 button before playing a file, OSD text color will be changed in dark or white. When you change
background image in dark or white, this function will allow to read the text easily.
2.10.5 Firmware Upgrade
Download a upgrade file from local distributor in your country or visit at www.airlinktek.com
After connecting TV set, move to the upgrade file and press [ENTER]. Upgrade is progressed automatically.
After finishing upgrade, you can check firmware version on Setup screen. Press [SETUP] button.
Technical Support
Contact your local distributor in your country or
AL Tech, Inc. in Korea www.airlinktek.com, Tel 82-2-3011-9219, Fax 82-2-566-6186, E-mail [email protected]
35
Download from Www.Somanuals.com. All Manuals Search And Download.
|