EN
Welcome
Quick start guide
Connect
1
2
3
Install
Enjoy
EN
Connect
Connect the base station
1
1. Place the base station in a central location near the telephone line socket and electricity sockets.
Power supply
Line cord
Splitter
2. Connect the supplied splitter to the connector at the back of the base station and then plug the line
cord and the power cable into the respective line jacks on the splitter.
3. Connect the other end of the line cord to the telephone line socket and the other end of the power
cable to the electricity socket.
Install
Insert batteries and charge
2
1. Use the coin or screwdriver
to unlock the battery cover.
2. Place the batteries as indicated 3. Charge handset for 24 hours
and replace the cover
anticlockwise
Set date and time
1. Press mMENU.
2. Scroll : to Clock & Alarm and press mSELECT.
3. Press mSELECT to enter Set Date/Time.
4. Enter current time (HH:MM) and current date (DD/MM/YY) and press mOK.
Now, you are ready to use your phone.
3
Enjoy
3
Make a call
Enter the phone number and press r.
OR
Press r and enter the phone number.
Answer a call
When the phone rings, press r key.
End a call
Press e key.
Adjust earpiece volume during a call
Press : to select from Volume 1 to Volume 5.
Set the ring melody
1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter
Handset Tones, scroll : to Ring Melody and press mSELECT.
2. Scroll : to your desired melody to play the melody.
3. Press mSELECT to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
Store a contact in the phonebook
1. Press mMENU, scroll : to Phonebook and press mSELECT, press mSELECT to enter
New Entry.
2. Enter the name of the contact (maximum 14 characters) and press mOK.
3. Enter the number (maximum 20 digits) and press mOK.
4. Enter the SMS Box number and press mOK (only for UK).
(The default SMS Box is 9. To modify, press >CLEAR and then enter the number (0 to 9).)
5. Scroll : to choose a group (<No Group>, <Group A>, <Group B>, <Group C>) and press
mSELECT.
A validation tone is emitted.
Access the phonebook
1. Press d in stand-by mode or press mMENU, scroll : to Phonebook and press mSELECT,
scroll : to List and press mSELECT.
2. Press : to browse the phonebook.
4
EN
Switch the handset On/Off
Press and hold e key for 3 seconds to switch off the handset in stand-by mode.
Short press e key to switch on the handset again.
Keypad lock/unlock
Press and hold * key for 2 seconds to lock or unlock keypad in stand-by mode.
Paging
1. Short press p key on the base. The handset starts to ring.
2. Once retrieved, press any key on the handset to end the paging.
Press
To
Enter the main menu from stand-by mode.
Select the function displayed on the handset screen directly above it.
Activate mute function during a call.
m
(Left soft key)
Switch on the backlight.
Go to redial list from stand-by mode.
Select the function displayed on the handset screen directly above it.
Initiate a second call, consult phonebook, call transfer or activate/deactivate HD Sound mode
>
(Right soft key)
during a call.
Switch on the backlight.
Answer an incoming external or internal call
Insert R for operator services when on the line.
r
e
Hang up a call.
Return to stand-by mode.
Long press in stand-by mode to switch off the handset, short press to switch on the
handset again.
Access call log from stand-by mode.
Scroll up a menu list or go to the previous phonebook or call log record.
Increase earpiece volume during a call.
u
d
Go to the previous character in editing mode.
Access phonebook from stand-by mode.
Scroll down a menu list or go to the next phonebook or call log record.
Decrease earpiece volume during a call.
Go to the next character in editing mode.
Initiate an internal call.
c
v
Answer an incoming call in handsfree mode.
Activate and deactivate the loudspeaker during a call.
Dial # in stand-by mode.
#
Long press to mute the ringer in stand-by mode.
Long press to insert a pause in dialling mode.
Long press to switch between upper and lower case in editing mode.
Dial * in stand-by mode.
Long press to activate and deactivate keypad lock.
*
5
Troubleshooting
For more information, please refer to page 58 of the user manual.
Problem
Solution
• No dialling tone
• Check the connections
• Charge the batteries for at least 24 hours
• Use the line cable provided
• Poor audio quality
• Move closer to the base station
• Move the base station at least one metre away from
any electrical appliances
• Register the handset to the base station
• The
icon is blinking
• Move closer to the base station
• Caller Line Identification
• Check your subscription with your network operator
(CLI) service does not work
Need help?
User Manual
Refer to the User Manual that is supplied with your ID937.
Online Support
3111 285 28021
6
|