Diagnostic Desktop
®
NEC MultiSync MD Series
21.3” grayscale medical-grade LCD displays ideal for diagnostic imaging
3061 shades of gray. 1024 shades
of gray out of a palette of 3061 can
be depicted when used with a 10-bit
video card.
lengthens the life of the screen by fending off scratches caused
by surface contact. The 98.5% transparent shield features anti-
reflective coating on both sides, anti-fingerprint coating on the
outside layer, a hard coat for ruggedness and excellent perma-
nent marker resistance.
Onboard selectable look-up tables
(LUTs). The LUT for adjustment
is built into the monitor, making
it independent of the video card.
The monitor’s gamma is factory
set to the DICOM GSDF standard,
but custom gamma settings can be
selected using the built-in LUTs.
1
SentryDX remote network sen-
sor. For non-assisted confor-
mance, calibration and report-
ing functions, an optional,
retractable remote sensor (Fig.
4) is available for NEC Multi-
Sync MD Series displays. This
component, which also can be
used with non-MD Series moni-
tors, is capable of measuring
monitor brightness, whitepoint
and ambient lighting, while
performing a quality check for DICOM confor-
mance and contrast response.
2
3
4
SA Superfine TFT displays with
anti-glare and low reflection. The
innovative SA Superfine TFT glass
with 2- or 3-Megapixel resolution
delivers a brilliant picture with a
wide viewing angle of up to 176°
and minimal off-angle color shift.
A typical NEC MultiSync MD
Series display system configuration
Figure 4. SentryDX attachable
remote network sensor
1
2
3
Single or dual head displays
Display controller board
GammaComp MD quality
control software
4
Calibrator (optional)
Therefore, it provides the best conditions for several doctors doing
consultation in front of the display.
GammaComp MD colorimeter. Featuring perfect-
ly matched coding for NEC MultiSync MD Series
displays, this allows for improved accuracy and
communication to the display and provides an
ideal solution for radiology technicians. Working
in conjunction with X-Light, the sensor (Fig. 5)
also supports standalone calibration and exact
Mutiple video card support. NEC MultiSync MD Series monitors
work with 10-bit or 8-bit cards, however, 10-bit is recommended
for optimum performance. 10-bit provides 1024 out of 3061
shades, while 8-bit provides only 256 out of 3061.
monitor matching, while enhancing calibra-
Figure 5.
Internal power supply. The NEC MultiSync MD Series features an
internal power supply. There is no brick to kick, therefore, clutter
from a clunky power supply is eliminated.
tion and whitepoint matching for better DICOM
GSDF conformance.
GammaComp
MD colorimeter
Optional accessories. To add further performance and conve-
nience, these accessories are available for the NEC MultiSync
MD Series.
* Each end-user environment is unique, therefore NEC Display Solutions
recommends that the user follows the quality control and calibration
Protective shield. As these displays are often used by diagnostic
professionals for illustration purposes, it is common for them
to encounter frequent
contact from fingers,
pointers and pens. To
help protect against LCD
screen damage while
maintaining the display’s
optimal image quality, an
optional protective shield
(Fig. 3) is available. This
lightweight accessory,
which is quickly and eas-
ily attached and removed,
When combined with an NEC MultiSync 90 Series display (left), NEC
MultiSync MD Series monitors can help provide an ideal PACS configura-
tion for your facility.
Figure 3. Attachable protective shield
Model
MultiSync MD21GS-3MP
MultiSync MD21GS-2MP
LCD Viewable Image Size
LCD Module Technology
Active Screen Area
21.3"
21.3"
SA-Superfine Grayscale TFT Glass
SA-Superfine Grayscale TFT Glass
43.3 x 32.5 cm
43.2 x 32.4 cm
Native Resolution
2048 x 1536 Landscape/1536 x 2048 Portrait
1600 x 1200 Landscape/1200 x 1600 Portrait
Pixel Pitch
0.21mm
0.27mm
700 cd/m2 (204 fl) max, 400 cd/m2 (117 fl) calibrated
900 cd/m2 (263 fl) max, 400 cd/m2 (117 fl) calibrated
Brightness at Native (typical)
Contrast Ratio (typical)
Response Time (typical)
Viewing Angle (typical) (up/down/left/right)
Grayscale Tone
700:1
35ms
700:1
35ms
88°/88°/88°/88°
10-bit: 1024 shades of gray from a pallet of 3061
88°/88°/88°/88°
10-bit: 1024 shades of gray from a pallet of 3061
Input Connectors
DVI-D
DVI-D and VGA
Selectable Gamma
DICOM, log-linear, 2.2, 1.8 and programmable
Clear base x=.292, y=.321, Approx. 8000 K
DICOM, log-linear, 2.2, 1.8 and programmable
Clear base x=.292, y=.321, Approx. 8000 K
White Point (color temperature)
Sensor Calibration
Brightness/White Point/External
Yes / Yes / Yes
Yes / Yes / Yes
Power Supply (internal)
Power Consumption (typical)(120V)
Power Savings
Yes
65W
<3W
Yes
65W
<3W
Tilt, Swivel Stand
Height Adjustable Stand
Pivot Enabled Stand
25° up/5° down, 340°
46mm
Yes
25° up/5° down, 340°
46mm
Yes
VESA Mounting
100 x 100mm
100 x 100mm
USB Input (for external colorimeter)
Dimensions (WxHxD)
GammaComp MD sensor (calibration mode)
GammaComp MD sensor (calibration mode)
18.4 x 18.1 x 7.9 in. (Landscape)
14.1 x 20.2 x 7.9 in. (Portrait)
18.4 x 18.1 x 7.9 in. (Landscape)
14.1 x 20.2 x 7.9 in. (Portrait)
Bezel Width
Net Weight
16mm
25.8 lbs.
16mm
25.8 lbs.
Regulatory Standards
UL2601/EN60601-1/EC601, FCC part 15 class B, CE/MDD,
PCT, C-tick, PCBC/B Mark, PSB, EnergyStar, GEEA Energy
Label, DIN 6868-57, FDA-510K
UL2601/EN60601-1/EC601, FCC part 15 class B, CE/MDD,
PCT, C-tick, PCBC/B Mark, PSB, EnergyStar, GEEA Energy
Label, DIN 6868-57, FDA-510K
Protection Glass (optional)
Display Video Cards (preferred)
Remote Network Sensor (optional)
Colorimeter
MD21PS-BK
MD21PS-BK
MDM10B-3MP
MDM10B-2MP
SentryDX (MD-N2M5B)
GammaComp MD Sensor (MDSVSENSOR)
SentryDX (MD-N2M5B)
GammaComp MD Sensor (MDSVSENSOR)
Limited Warranty
3 years, parts and labor (includes Advanced Overnight
Exchange)*
EW1-MD3MP21 / EW2-MD3MP21
3 years, parts and labor (includes Advanced Overnight
Exchange)*
EW1-MD2MP21 / EW2-MD2MP21
Extended Warranty (addtl. 1 yr./addtl. 2 yr.)
* Limited to a luminance setting up to 450 cd/m2 with guaranteed chromaticity match (whitepoint) +/- .01 of CIE x,y, of original factory
setting via X-Light technology
NOTE 1: American College of Radiology (ACR) recommends minimum of 171 cd/m2
MDM10B-AVX3MP
MDM10B-2MP
MDM10B-3MP
Display video card
Matrox 256-bit GPU
DDR (Double Data Rate) SDRAM
128 MB
Matrox 512-bit GPU
DDR (Double Data Rate) SDRAM
256 MB
Matrox 512-bit GPU
DDR (Double Data Rate) SDRAM
256 MB
Graphics Chip
Memory Type
Memory Size
400 MHz
400 MHz
400 MHz
Main RAMDAC
Secondary RAMDAC
Card Type
165 MHz
PCIe x16, low profile
Low profile
400 MHz
PCI 64-bit, 66 MHz
ATX
400 MHz
PCI 64-bit, 66 MHz
ATX
Form Factor
1600 x 1200 (analog); 2048 x 1536 (digital)
3 x DVI-I (1 analog, 2 digital)
Class A: FCC, CE, CSA, VCCI
1 Year
1920 x 1200 (digital / analog)
2 x DVI-I
Class A: FCC, CE, CSA, VCCI
1 year
2048 x 1536 (digital)
2 x DVI-I
Class A: FCC, CE, CSA, VCCI
1 Year
Maximum Resolution
Connectors
Certifcations
Limited Warranty
MultiSync is a registered trademark, and GammaComp, NaViSet and
X-Light are trademarks of NEC Display Solutions. All other brand or
product names are trademarks or registered trademarks of their respec-
tive holders. Product specifications subject to change. 3/08 Ver. 3.
NEC Display Solutions
500 Park Boulevard, Suite 1100
Itasca, IL 60143
©2008 NEC Display Solutions of America, Inc. All rights reserved.
866-NEC-MORE
|