Register your product and get support at
CD 155
US-EN Telephone answering machine
!
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Table of contents
1
Safety information
3
4.3
4.4
Install your phone
Menu structure
15
17
1.1
Equipment Approval
Information
3
4
5
Using your phone
Make a call
19
19
20
20
1.2
1.3
Interference Information
5.1
5.2
5.3
Hearing Aid Compatibility
(HAC)
5
5
Answer a call
End a call
1.4
FCC RF Radiation Exposure
Statement
6
Use more of your phone 21
2
Important
6
6
7
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
Switch the handset on/off
Keypad lock/unlock
Text or number entry
Call in progress
21
21
21
21
22
24
24
26
27
2.1
2.2
2.3
Power requirements
Conformity
Electric, Magnetic and
Electromagnetic Fields ("EMF") 7
2.4
2.5
Recycle your batteries
Service Centers
7
8
Using your phonebook
Using the redial list
Using the call log
3
Your phone
9
9
3.1
3.2
3.3
3.4
What’s in the box
Overview of your phone
Display icons
Using the intercom
Handset locating
10
12
7
Personal settings
Change the handset name
Handset Tones
28
28
28
Overview of the base station 13
7.1
4
Getting started
14 7.2
4.1
4.2
Connect the base station
Wall mounting the base
14
14
7.3
7.4
Change the display language 29
Activate/deactivate auto
hang-up
29
Table of contents
1
Table of contents
8
Clock and Alarm
Set date and time
Set date/time format
Set alarm
30 10.4 Record your personalised
outgoing message (OGM)
38
38
8.1
8.2
8.3
8.4
30
10.5 Set the answer mode
30
10.6 Answering machine settings 39
30
31
11
12
Technical data
41
Set alarm tone
Frequently asked
questions
9
Advanced settings
Change Master PIN
Registration
32
32
32
32
33
33
33
34
34
34
35
42
44
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
13
Index
Unregister
Reset unit
Set area code
Set prefix
Change flash time
Change the dial mode
Set first ring
9.10 Default settings
10
Telephone answering
machine (TAM)
36
36
37
10.1 Play
10.2 Delete all messages
10.3 Switch the answering machine
on/off via handset
38
2
Table of contents
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. See
installation instructions for details.
Notes
1
Safety information
1.1
Equipment Approval
Information
•
This equipment may not be used on
coin service provided by the telephone
company.
Your telephone equipment is approved
for connection to the Public Switched
Telephone Network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
•
Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
Notice must be given to the telephone
company upon permanent
disconnection of your telephone from
your line.
If your home has specially wired alarm
equipment connected to the
Requirements for Telephone Terminal
Equipment published by ACTA.
•
•
1.1.1 Notification to the Local
Telephone Company
On the bottom of this equipment is a
label indicating, among other information,
the US number and Ringer Equivalence
Number (REN) for the equipment. You
must, upon request, provide this
information to your telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have questions
about what will disable alarm
equipment, consult your telephone
company or a qualified installer.
US Number is located on the cabinet
bottom.
REN Number is located on the cabinet
bottom.
1.1.2 Rights of the Telephone
Company
determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
Should your equipment cause trouble on
your line which may harm the telephone
network, the telephone company shall,
where practicable, notify you that
temporary discontinuance of service may
be required. Where prior notice is not
practicable and the circumstances
requirements adopted by the ACTA. A
compliant telephone cord and modular
Safety information
3
warrant such action, the telephone
company may temporarily discontinue
service immediately. In case of such
temporary discontinuance, the telephone
company must: (1) promptly notify you of
such temporarydiscontinuance; (2) afford
you the opportunity to correct the
situation; and (3) inform you of your right
to bring a complaint to the Commission
pursuant to procedures set forth in
Subpart E of Part 68, FCC Rules and
Regulations.
The telephone company may make
changes in its communications facilities,
equipment, operations or procedures
where such action is required in the
operation of its business and not
inconsistent with FCC Rules and
Regulations. If these changes are
expected to affect the use or
interference by one or more of the
following measures: Reorient the radio/
television receiver’s antenna, relocate
the equipment with respect to the
receiver, plug the equipment and receiver
into separate circuit outlets. The user
may also wish to consult a qualified radio/
television technician for additional
suggestions. This equipment has been
fully tested and complies with all limits for
Class B computing devices pursuant to
part 15 FCC Rules and Regulations. This
device complies with RSS-210 of Industry
Canada. Operation is subject to the
following two conditions: (1) This device
may not cause interference, and (2) This
device must accept any interference,
including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
performance of your telephone
equipment, the telephone company must
give you adequate notice, in writing, to
allow you to maintain uninterrupted
service.
(1) This device may not cause harmful
interference; and (2) This device must
accept any interference received,
including interference that may cause
undesired operation.
1.2
Interference Information
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
This equipment generates and uses radio
frequency energy which may interfere
with residential radio and television
reception if not properly installed and
used in accordance with instructions
contained in this manual. Reasonable
protection against such interference is
ensured, although there is no guarantee
this will not occur in a given installation. If
interference is suspected and verified by
switching this equipment on and off, the
user is encouraged to try to correct the
interference to radio communications.
4
Safety information
However, there is no guarantee that
interference will not occur in a particular
installation.
Notice: The changes or modifications not
expressly approved by the party
responsible for compliance could void the
user's authority to operate the
equipment.
Privacy of Communications may not be
ensured when using this product.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
1.3
Hearing Aid Compatibility
(HAC)
This telephone system meets FCC/
Industry Canada standards for Hearing
Aid Compatibility.
•
•
•
Reorient or relocate the receiving
antenna (that is, the antenna for radio
or television that is “receiving” the
interference).
Reorient or relocate and increase the
separation between the
telecommunications equipment and
receiving antenna.
Connect the telecommunications
equipment into an outlet on a circuit
different from that to which the
receiving antenna is connected.
1.4
FCC RF Radiation Exposure
Statement
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment. This
equipment should be installed and
operated with a minimum distance of 20
centimeters between the radiator and
your body. This transmitter must not be
co-located or operated in conjunction
with any other antenna or transmitter.
For body worn operation, this phone has
been tested and meets the FCC RF
exposure guidelines when used with the
belt clip supplied with this product. Use of
other accessories may not ensure
compliance with FCC RF exposure
guidelines.
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio/television
technician for additional suggestions.
Also, the Federal Communications
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio/TV Interference Problems.” This
booklet is available from the U.S.
GovernmentPrinting Office, Washington,
D.C. 20402. Please specify stock number
004-000-00345-4 when ordering copies.
Safety information
5
2.1
Power requirements
2
Important
•
This product requires an electrical
supply of 120 volts AC. In case of
power failure, the communication can
be lost.
The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical outlet
is always easily accessible.
The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the standard
UL 60950.
Take time to read this user manual before
you use your phone. It contains important
information and notes regarding your phone.
•
NOTICE: This product meets the
applicable Industry Canada technical
specifications.
The equipment must be installed using an
acceptable method of connection. The
customer should be aware that compliance
with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made
by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe systems, if present, are
connected together. This precaution may
be particularly important in rural areas.
CAUTION: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
•
!
Warning
To avoid damage or malfunction:
•
Do not allow the charging contacts or
the battery to come into contact with
metal objects.
Do not open it as you could be
exposed to high voltages.
Do not allow the charger to come into
contact with liquids.
Never use any other battery than the
one delivered with the product or
recommended by Philips: risk of
explosion.
•
•
•
•
•
Always use the cables provided with
the product.
Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
•
NOTES: This equipment may not be used
on coin service provided by the
telephone company.
6
Important
•
Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.
2.3
Electric, Magnetic and
Electromagnetic Fields
("EMF")
•
•
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the set.
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
1. Philips Royal Electronics
manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
2. One of Philips' leading Business
Principles is to take all necessary
health and safety precautions for our
products, to comply with all
•
•
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
•
Active mobile phones in the vicinity
may cause interference.
About operating and storage temperatures:
•
•
•
Operate in a place where temperature
is always between 0 and 35º C (32 to
95º F).
Store in a place where temperature is
always between -20 and 45º C (-4 to
113º F).
3. Philips is committed to develop,
produce and market products that
cause no adverse health effects.
4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Battery life may be shortened in low
temperature conditions.
5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
2.2
Conformity
We, Philips declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
integration in its products.
2.4
Recycle your batteries
Do not dispose your rechargeable
batteries. Call the toll fee number 1-800-
822-8837 to get instructions on how to
recycle your batteries.
Important
7
®
The RBRC Seal on
the nickel metal
hydride battery
2.5
Service Centers
US service center
Philips Accessories & Computer
Peripherals North America1881 Route
46 WestLedgewood, NJ 07852
Phone: (800) 233-8413
E-mail support:
indicates that Philips
Royal Electronics is
voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
®
The RBRC program provides a
convenient alternative to placing used
nickel metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
®
Philips’s participation in RBRC makes it
easy for you to drop off the spent battery
at local retailers participating in the
®
RBRC program or at authorized Philips
product service centers.
Please call 1-800-8-BATTERY for
information on Ni-MH battery recycling
and disposal bans/restrictions in your
area. Philips’s involvement in this program
is part of its commitment to protecting
our environment and conserving natural
resources.
®
RBRC is a registered trademark of
Rechargeable Battery Recycling
Corporation.
8
Important
3
Your phone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
3.1
What’s in the box
Handset
Base station with
bracket
Battery door
Belt clip
2 AAA rechargeable
NiMH batteries
Power supply
Line cord*
User manual
Note
Guarantee
Quick start
guide
*You may find in the box the line adaptor delivered separately from the line cable. In
this case, you have to connect the line adaptor to the line cord first before
plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
Your phone
9
D
Navigation keys
:
3.2
Overview of your phone
In idle mode: Scroll up to access the Call log
and scroll down to access the Phonebook.
During a call: Scroll up/down to increase or
decrease earpiece and loudspeaker volume.
In other modes: Scroll up/down a menu list
or go to the previous or next record.
E
Talk key
r
In idle mode: Answer an incoming
external or internal call.
During a call: Activate the recall function.
In phonebook/call log/redial list reviewing
mode: Dial the selected number.
F
Hang-up/Exit key
e
In idle mode: Long press to switch on/off
the handset.
During a call: Hang up a call.
In other modes: Short press to return to
idle mode.
G
Menu key
m
In idle mode: Access the main menu.
Loudspeaker key
H
v
In idle mode: Turn on the loudspeaker
and dial the number. Answer an incoming
call using handsfree mode.
During a call: Toggle the loudspeaker
on/off.
In phonebook/call log/dial list reviewing
mode: Dial the selected number using
handsfree mode.
A
B
Earpiece
OK key
<
In other modes: Select the function
displayed on the handset screen directly
above it.
I
Redial key
l
In idle mode: Access the Redial list.
In direct dialing mode: Dial the last dialed
number.
C
Back/Clear key
c
In text or number editing mode: Short
press to delete one digit/character.
In other modes: Select the function
displayed on the handset screen directly
above it.
J
Keypad lock/format key
*
In idle mode: Insert *. Long press to lock/
unlock keypad.
10
Your phone
During a call: Switch from pulse dialing to
tone dialing.
In calllog reviewing mode: Press repeatedly
to view the alternate dialing sequences.
M
Call transfer/Intercom key
i
In idle mode: Initiate an internal call.
During a call: Hold the line and page
another handset or toggle between an
external and internal call. Long press to
initiate a conference call.
N
O
P
!
K
Ringer off key
#
In idle mode: Insert #. Long press to turn
the ringer on/off.
Microphone
Battery door
Loudspeaker
During a call: Insert #. Long press to insert
a pause.
In text editing mode: Switch
between upper and lower case. Long press
to insert a pause.
Warning
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
L
Mute key
M
During a call: Mute/unmute the handset
microphone.
Q
Belt clip
Your phone
11
3.3
Display icons
A
Status bar
Indicates battery is fully
Displays when the answering
machine is activated. Icon
blinks when new answering
machine messages are
received. Icon blinks rapidly
when the answering machine
memory is full.
charged.
Indicates battery is fully
discharged.
Indicates that an external call
is connected or held. Icon
blinks when receiving an
incoming call.
Indicates new voice messages
received. Icon blinks when
there are unread messages.
Displays when the call log is
accessed. Icon blinks when
there are new missed calls.
Displays when the
Indicates that the handset is
registered and within range
of the base station. Icon
blinks when the handset is
out of range or is searching
for a base.
B
OK key
Displays when in menu mode to confirm
your selection.
phonebook is accessed.
Displays when the alarm
clock is activated.
C
key
Indicates that more options are available.
Use the navigation keys to scroll up/down.
Displays when the
Increase
loudspeaker volume during a call.
BACK key
Displays when in menu mode. Select
BACK to return to the previous menu
level. Select BACK to delete the last digit/
character entered.
or Decrease
earpiece or
loudspeaker is activated.
Displays when ringer off is
activated.
D
12
Your phone
3.4
Overview of the base station
A
B
Earpiece
Volume keys
F
Next key
s
Skip to next message during message
playback.
G
Play phone messages (the last recorded
will be played first).
Press again to stop message playback.
- +
Increase (+) or Decrease (-) speaker
volume.
There are 5 levels of speaker volume.
Play/Stop key
p
C
On/Off key
o
Short press to switch on/off the
answering machine.
D
Delete current message during message
playback.
Long press to delete all messages when
TAM is in idle mode (unread messages
will not be deleted).
H
Handset locator key
V
Delete key
Page handset.
Long press to start registration procedure.
I
f
LED indicator around the Play/
Stop key
Slow Blinking (1 second interval):
Indicates that there are unread new
messages.
Fast Blinking (0.5 seconds interval):
Indicates that the answering machine
memory is full.
E
Previous key
R
Go to previous message if pressed within
1 second of current message playback.
Replay current message if pressed after 1
second of current message playback.
Steady On:
Indicates that the answering machine is on.
Indicates an on-going TAM operation.
Indicates an on-going remote operation
via handset.
Your phone
13
the line adaptor to the line cord first before
plugging the line cord to the line socket.
4
Getting started
!
Warning
Avoid placing the base station too close to
large metal objects such as filing cabinets,
radiators or electrical appliances. This can
impair the range and sound quality.
Buildings with thick internal and external
walls may impair transmission of signals to
and from the base.
4.1
1
Connect the base station
Place the base station in a central
location near the telephone line
socket and electricity socket.
!
Warning
The base station does not have an ON/OFF
power switch. Power is applied when the
power adaptor is plugged into the unit and
connected to the electricity socket. The
only way to power down the unit is to
unplug the power adaptor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and telephone line cord
have to beconnected correctly, asincorrect
connection could damage the unit.
Always use the telephone line cord
supplied with the unit. Otherwise, you
may not get a dial tone.
Connect the line cord and the
power cable to their corresponding
connectors at the back of the base
station.
2
4.2
Wall mounting the base
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
!
Warning
Other wall mounting methods are not
recommended and may damage the
product.
Remove the bracket from the back
of the base station by pressing down
the two latches on the top of the
bracket.
Connect the other end of the line
cord and power cable to their
respective sockets.
1
3
Note
The line adaptor may not be attached to the
line cord. In this case, you have to connect
14
Getting started
4.3
Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
4.3.1 Install battery
!
Warning
Always use AAA rechargeable batteries
supplied with your unit. There could be
risk of battery leakage if you use alkaline
batteries or other battery types.
Turn the bracket around and re-
insert the bracket to the back of
the base station.
2
Slide out the battery cover.
1
Place the batteries in the correct
polarity as indicated and replace the
cover.
2
Slide the base down into place.
3
4.3.2 Charge battery
Use the pedestral wall mounting to
plug your base station.
4
!
Warning
The handset must be charged for at least 24
hours before using it for the first time.
When the battery level becomes low, the
low battery sensor alerts you by sounding an
audible tone and blinking the battery icon.
If the battery level becomes exceedingly
low, the phone automatically switches off
shortly after the alert and any function in
progress will not be saved.
Placethehandsetonthechargingcradle
of the base station. A beep is emitted if
1
the handset is placed correctly.
Getting started
15
The battery icon
blinks during charge.
The battery icon
on the display
becomes steady
2
3
when the handset is fully charged.
Note
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the phone
is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
icon
will blink.
Tip
When reaching the range limit and the
conversation becomes crackly, move
closer to the base.
16
Getting started
4.4
Menu structure
The table below describes the menu tree of your phone.
Press m key to display the main menu. Use navigation keys : to navigate within
the menus and press < key to enter each option.
PHONEBOOK
NEW ENTRY
LIST
Phonebook entries
EDIT ENTRY
DELETE ENTRY
DELETE ALL
DIRECT MEMORY
HANDSET NAME
HANDSET TONES
KEY 1/2
PERSONAL SET
RING VOLUME
RING TONES
KEY BEEP
OFF/LEVEL 1/LEVEL 2/LEVEL 3/LEVEL 4
Melody list
ON/OFF
LANGUAGE
ENGLISH/ESPANOL/FRANCAIS
AUTO HANG-UP
SET DATE/TIME
SET FORMAT
ON/OFF
CLOCK & ALARM
TIME FORMAT
DATE FORMAT
12 HOURS
24 HOURS
DD/MM
MM/DD
ALARM
OFF/ON ONCE/ON DAILY
MELODY 1/2/3
ALARM TONE
Getting started
17
ADVANCED SET
CHANGE PIN
REGISTRATION
UNREGISTER
RESET
AREA CODE
AUTO PREFIX
DETECT DIGIT
PREFIX
FLASH TIME
DIAL MODE
FIRST RING
PLAY
SHORT/MEDIUM/LONG
TONE/PULSE
ON/OFF
ANSWER MACHINE
During playback
REPEAT/PREVIOUS/NEXT/DELETE
DELETE ALL
ANSWER ON/OFF
RECORD OGM
ON/OFF
ANSWER & REC
PLAY OGM/
RECORD OGM/
DELETE
ANSWER ONLY
PLAY OGM/
RECORD OGM/
DELETE
ANSWER MODE
SETTINGS
ANSWER & REC
ANSWER ONLY
RING DELAY
2/3/4/5/6/7/ECONOMY
REMOTE ACCESS
VOICE LANGUAGE
ACTIVATE/DEACTIVATE
ENGLISH/ESPANOL/FRANCAIS
18
Getting started
example, pressing 2 will show the
entries starting with A. Pressing 2again
will show the entries starting with B, etc...
5
Using your phone
5.1
Make a call
5.1.5 Call from the call log
Press u in idle mode.
1
2
3
5.1.1 Predialling
Scroll :to an entry in the call log.
Dial the number (maximum 24 digits).
1
2
Press r key.
Press r key.
•
The call is initiated.
•
The call is initiated.
Note
!
Tip
You need to subscribe to Caller Line
Identification service to be able to see the
caller’s number or name in the call log.
(see “Access call list” on chapter 6.7.1)
You may insert a prefix number to the
beginning of your predial number, see
“Set Prefix” on chapter 9.6 for more
information.
5.1.5.1
To choose the format for
call log display
5.1.2 Direct dialling
Press r or v key to take the
1
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will
automatically appear in front of the 10-
digit local calls.
line.
Dial the number.
The call is initiated.
2
•
5.1.3 Call from redial list
Press l key in idle mode.
1
2
Scroll : to an entry in the redial
list.
When viewing the call log, press
*to change the format of the call
log display as it should be dialled
from your location. For example, if
the call log entry appears as
“234-567-8900”:
1
Press r key.
3
•
The call is initiated.
5.1.4 Call from the phonebook
Press d in idle mode.
1
2
3
Scroll : to a phonebook entry.
•
Press * once to display
Press r key.
“1-234-567-8900”
•
The call is initiated.
•
•
Press *twice to display “567-8900”
Press * 3 times to display
“1-567-8900”
Tip
Instead of scrolling : to browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate. For
•
Press * 4 times to display
“1-234-567-8900” again.
Using your phone
19
To dial the current displayed
2
5.2.1 Handsfree answering
number, press r key.
Danger
•
The call is initiated.
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
Note
You need to subscribe to Caller Line
Identification service to be able to see the
caller’s number or name in the call log
(see “Access call list” on chapter 6.7.1).
When saving the call list entry to
phonebook, theoriginal incomingnumber
will be saved instead of the current
displayed number.
When the phone rings, press v key.
•
The handset loudspeaker is
activated.
5.3
End a call
To end a conversation, press e key.
If the first 3 digits of the incoming number
corresponds to the local area code set in
your phone, they will be filtered
•
The call ends.
Tip
automatically when you press the r or
vkey to dial. To change the local area
code, please refer to see “Set area code”
on chapter 9.5.
You can simply place the handset back to its
base station to end the call (see “Activate/
deactivate auto hang-up” on chapter 7.4).
This feature is activated by default.
Note
The call duration (HH-MM-SS) will be
5.2
Answer a call
Danger
dcispBlaAyCedK.otnotrheetuhranndtoseitdlsecrmeoend.eP. ress
When the handset rings during an incoming
call, please do not hold the handset too
close to your ear as the volume of the
ringing tone may damage your hearing.
When the phone rings, press r key.
•
The call is established.
Note
Incoming call has priority over other events.
Whenever there is an incoming call, other
status in progress such as phone setting,
menu navigation, etc will be aborted.
20
Using your phone
T U V 8 ?
8
9
0
#
*
6
Use more of your
phone
W X Y Z 9
0 - / \ # +
6.1
Switch the handset on/off
#
*
Press and hold e key for more than 5
seconds to switch on/off the handset in
idle mode.
Tip
Press cBACK to delete the last digit or
6.2
Keypad lock/unlock
character entered.
Press and hold * key for 1 second to
lock/unlock the keypad in idle mode.
6.4
Call in progress
Some options are available to you during a
call. The available options are:
6.3
Text or number entry
When you select a field in which you can
enter text, you can enter the letters that
are printed on the keys by pressing the
relevant key once or several times. For
example, to enter the name “PAUL”:
6.4.1 Adjust earpiece volume
During a call, press : to select from
VOLUME 1 to VOLUME 3
.
Press 7 once:
P
1
2
3
4
Press 2 once: PA
6.4.2 Mute/unmute microphone
When the microphone is muted, your
correspondent cannot hear you.
Press 8 twice: PAU
Press 5 three times: PAUL
During a call, press Mkey to turn
1
The table below gives you the character
assignment during text or number entry:
off the microphone.
Press M key again to turn on the
2
Keys
Assigned characters
microphone.
space 1 _ < > *
1
6.4.3 Activate/deactivate
loudspeaker mode
A B C 2
D E F 3
G H I 4
J K L 5
2
3
4
5
6
7
Danger
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
M N O 6
P Q R S 7
During a call, press v key to
1
activate the loudspeaker mode.
Press v key again to return to
2
normal mode.
Use more of your phone
21
Enter the number (maximum 24
5
6.4.4 Adjust loudspeaker volume
digits) and press <OK to confirm.
During a call, press : to select from
•
A validation tone is emitted.
VOLUME 1 to VOLUME 5
.
Note
Press cBACK to delete the last digit or
6.4.5 Call waiting
character entered.
If you have subscribed to Call Waiting
service, the earpiece will emit a beep tone
to inform you that there is a second
incoming call. The number or name of the
second caller will also be displayed on your
phone if you have subscribed to Caller
Line Identification service (CLI). Please
contact your network provider for more
To return to idle mode, press e key.
Tip
You cannot store a new phonebook entry
when the memory is full. In this case, you
have to delete existing entries to make
space for new entries.
6.5.2 Access phonebook
information on this service
.
Press d in idle mode to browse
When you receive a second incoming call
while on the phone, press rkey to put
the current call on hold and answer the
second call. Press r key again to go
back to the first caller.
1
the phonebook entries.
Alternatively, you can press m
key, scroll : to PHONEBOOK
and press < , scroll :to LIST
and press <OOKK
.
The above operations may be different
according to your network.
•
The phonebook entries will be listed
in alphabetical order.
To view the details, press <OK.
6.5
Using your phonebook
2
Your phone can store up to 50 phonebook
memories. Each phonebook entry can
have a maximum of 24 digits for the phone
number and 12 characters for name.
Tip
Instead of scrolling : to browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate. For
example, pressing 2 will show the
entries starting with A. Pressing 2again
will show the entries starting with B, etc...
6.5.1 Store a contact in the
phonebook
1
Press m key in idle mode, scroll
: to PHONEBOOK and press
<OK. Press <OK again to enter
6.5.3 Modify a phonebook entry
NEW ENTRY
.
Press m key in idle mode, scroll
1
ENTER NAME is displayed on the screen.
Enter the name of the contact
(maximum 12 characters) and press
<OK.
2
3
: to PHONEBOOK and press
<OK, scroll : to EDIT ENTRY
and press <OK.
Scroll :to select an entry to edit.
2
3
ENTER NUMBER is displayed on the
screen.
4
Press <OK to display name. Edit
the name and press <OK.
22
Use more of your phone
Edit the number and press <OK to
4
6.5.6.1
Add/edit direct access
memory
confirm.
•
A validation tone is emitted.
Press m key in idle mode, scroll
: to PHONEBOOK and press
<OK, scroll : to DIRECT
1
6.5.4 Delete a phonebook entry
Press m in idle mode, scroll :
1
Scroll :atnod press <
KEY 1 or KEY 2 and
MEMORY
OK.
to PHONEBOOK and press <OK
scroll : to DELETE ENTRY and
press <OK.
,
2
press <OK.
•
The stored number is displayed (if
any).
Scroll : to select an entry to
delete and press <OK.
2
3
Press m to enter direct memory
3
4
5
6
CONFIRM? is displayed on the
screen. Press <OK again to
confirm deletion.
menu.
Scroll : to select EDIT and press
<OK.
•
A validation tone is emitted.
ENTER NAME is displayed on the
screen.
Note
Press cBACK to discard change and the
Enter the name of the contact
(maximum 12 characters) and press
screen returns to phonebook list.
OK
.
6.5.5 Delete the phonebook list
ENTER NUMBER is displayed on the
screen.
Enter the number (maximum 24
digits) and press OK to confirm.
7
8
Press m key in idle mode, scroll
1
: to PHONEBOOK and press
<OK.
Scroll : to DELETE ALL and
2
•
A validation tone is emitted.
press <OK.
CONFIRM? is displayed on the screen.
3
6.5.6.2
Delete direct access
memory
Press <OK again to confirm deletion.
•
A validation tone is emitted.
Press m key in idle mode, scroll
: to PHONEBOOK and press
<OK, scroll : to DIRECT
1
Note
Press cBACK to discard change and the
screen returns to phonebook list.
Scroll :atnod press <
KEY 1 or KEY 2 and
MEMORY
OK.
2
6.5.6 Direct access memory
There are 2 direct access memories
(Keys 1 and 2) included in the
phonebook memory. A long press on the
keys in idle mode will automatically dial
the stored phone number.
press <OK.
•
The stored number is displayed (if
any).
Press m to enter direct memory
3
4
menu.
Scroll : to DELETE and press
<OK.
Use more of your phone
23
CONFIRM? is displayed on the
screen. Press <OK to confirm
deletion.
5
6.6.3 Delete a redial number
Press l key in idle mode to go to
1
the redial list, scroll :to select an
•
A validation tone is emitted and the
screen returns to previous menu.
entry and press m.
Scroll : to DELETE and press
2
<OK.
6.6
Using the redial list
CONFIRM? is displayed on the
screen.
3
The redial list stores the last 5 numbers
dialed. A maximum of 24 digits can be
displayed for each entry.
Press <OK to confirm deletion.
•
A validation tone is emitted and the
screen returns to redial list.
6.6.1 Access redial list
Note
Press l key to go to the redial
1
Press cBACK to discard change and the
list and scroll : to browse the
screen returns to redial list.
redial list.
•
The last number dialed will appear
first in the redial list. If the redial
number matches a phonebook
entry, the name will be displayed
instead.
6.6.4 Delete the redial list
Press l key in idle mode to go to
1
the redial list and press m, scroll
to DELETE ALL and press <OK
.
To view the details, press <OK key.
Note
2
CONFIRM?
Press mistodicsoplnafyiremd odneltehteiosnc.reen.
2
•
A validation tone is emitted and the
screen returns to redial list.
To return to idle mode, press e key.
6.6.2 Save a redial number into
the phonebook
Note
Press cBACK to discard change and the
Press l key in idle mode to go to
1
screen returns to redial list.
the redial list, scroll :to select an
entry and press <OK. Press m
6.7
Using the call log
again to enter SAVE NUMBER
.
The call log stores the last 10 external calls
and any new voice mail and answering
machine messages received. If you have
subscribed to Caller Line Identification
(CLI), and provided the identity of the
caller is not withheld, the name (or
number) of the caller will be displayed.
ENTER NAME is displayed on the
screen.
2
3
Enter the name of the contact
(maximum 12 characters) and press
<OK.
•
A validation tone is emitted. SAVED !
is displayed for 2 seconds and the
screen returns to redial list.
Note
If the identity of the caller is withheld or
the network does not provide the date
and time information, then the information
will not be displayed in the call log.
Note
Press cBACK to delete the last character
entered.
24
Use more of your phone
If you have not subscribed to Caller Line
Identification service, there will not be
any information displayed in the call log.
ENTER NAME is displayed on the
screen.
3
4
Enter the name of the contact
(maximum 12 characters) and press
<OK.
6.7.1 Access call list
•
SAVE ! is displayed for 2 seconds
Press u in idle mode to browse
1
and the screen returns to call log.
the call list.
Note
•
The calls (missed and received) are
displayed in chronological order
with the most recent call at the top
of the list.
Press cBACK to delete the last character
entered.
6.7.4 Delete a call list entry
To view the details, press <OK.
2
Press u in idle mode, scroll :
1
•
The call number is displayed. Press
to a call list entry and press m.
<OK again to view more details.
Scroll : to DELETE and press
2
<OK to confirm deletion.
6.7.2 Consulting the call list
The screen can either display :
the caller’s number*
the caller’s name (if recorded in the
phonebook)*
CONFIRM? is displayed on the
screen.
3
•
•
Press <OK to confirm deletion.
•
A validation tone is emitted and the
screen returns to call log.
•
•
<
<
WITHHELD> if it is a private call.
UNAVAILABLE> if it is a public or
Note
Press cBACK to discard change and the
out of area call.
Subject to a subscription with your
screen returns to call log.
*
network operator. If Caller Line
Identification (CLI) is not subscribed, there
will be no entries in the call log.
6.7.5 Delete the call list
Press u in idle mode, scroll :
1
to a call list entry and press m.
Note
Scroll : to DELETE ALL and
2
You can display the phone number, the
time and the date of the call by pressing
<OK. The time and date displayed is
dependent on the network.
press <OK.
CONFIRM? is displayed on the
screen.
3
Press <OK again to confirm
deletion.
6.7.3 Save call list entry into the
phonebook
•
A validation tone is emitted and the
screen returns to call log.
Press u in idle mode, scroll :
1
Note
to a call list entry and press m.
Press cBACK to discard change and the
Scroll : to SAVE NUMBER and
2
screen returns to call log.
press <OK.
Use more of your phone
25
both internal callers can talk.
Intercom is established.
Press ekey on the first handset to
transfer the external call to the
called handset.
6.8
!
Using the intercom
Warning
•
4
Intercom and call transfer is only possible
with handsets registered to the same base
station.
•
The external call is transferred.
This feature is only available when there are
at least 2 registered handsets. It allows you
to make free internal calls, transfer external
calls from one handset to another and use
the conference option.
Note
If there is no answer from the called
handset, press i key to resume the
external call.
6.8.3 Answer an external call
during intercom
6.8.1 Intercom another handset
During intercom, a new call tone is
emitted when there is an incoming
external call.
1
Note
If the handset does not belong to CD150/
155 range, this function may not be available.
Press rto answer the external call
2
Press i key in idle mode.
1
and end the intercom.
•
Intercom is established immediately if
there are only 2 registered handsets.
•
Connection with the external call is
established.
If there are more than 2 registered
handsets, the handset numbers which
are available for intercom will be
displayed. Press the specific handset
number you wish to call to start
intercom.
2
Note
To put the internal call on hold and answer
the incoming external call, press ikey.
6.8.4 Switch between an internal
and external call
6.8.2 Transfer an external call to
another handset
During the call, long press * key to
switch between an internal or external
call.
During the call, press and hold i
1
key to put the external call on hold
(the caller can no longer hear you).
6.8.5 Establish a three-party
conference call
•
Intercom is established immediately if
there are only 2 registered handsets.
The conference call feature allows one
external call to be shared with two
handsets (in intercom). The three parties
can share the conversation and no
network subscription is required.
If there are more than 2 registered
handsets, the handset numbers
which are available for intercom will
be displayed. Press the specific
handset number you wish to call to
start intercom
2
During the call, long press i key
1
to put the external call on hold (the
caller can no longer hear you).
Press r key on the called handset
3
to answer the internal call, where
26
Use more of your phone
If there are more than 2 registered
handsets, the handset numbers which
are available for intercom will be
displayed. Press the specific handset
number you wish to call.
2
Press ror vkey on the called
handset to answer the internal call,
where both internal callers can talk.
3
4
•
Intercom is established.
Press and hold i key for 2
seconds on the first handset to start
the three-party conference.
•
CONFERENCE will be displayed on
the screen once the conference call
is established.
Tip
To establish intercom using handsfree
mode, press vkey again on the called
handset to turn on speakerphone.
6.9
Handset locating
The paging feature enables you to locate
a missing handset if the handset is in range
and contains charged batteries.
Press V key on the base station.
1
•
All the registered handsets start to
ring.
Once retrieved, press any key on the
handset to end the handset locating.
2
Note
If there are no key presses within 30
seconds, the handset and base station will
automatically return to idle mode.
Tip
Press V key on the base station again
to stop handset locating.
Use more of your phone
27
Scroll : to your desired volume
2
level and press <OK to confirm.
7
Personal settings
•
A validation tone is emitted and the
screen returns to previous menu.
7.1
Change the handset name
Note
You can name the handset and display the
handset name in idle mode. The default
handset name of your handset is PHILIPS
When RINGER OFF is activated, the icon
will be displayed on the screen.
.
Press m key in idle mode, scroll
1
7.2.2 Set the tones melody
There are 10 ring melodies available on
your handset.
: to PERSONAL SET and press
<OK, scroll : to HANDSET
NAME and press <OK
.
Press m key in idle mode, scroll
1
The last stored name is displayed.
Press cBACK key to delete the
characters one by one.
2
3
: to PERSONAL SET and press
<OK, press <OK to enter
HANDSET TONES, scroll : to
Enter the new name (maximum 10
characters) and press <OK to
confirm.
RING TONES and press <OK
.
Scroll : to your desired melody
2
3
to play the melody.
•
A validation tone is emitted and the
screen returns to previous menu.
Press <OK to set the ring melody.
•
A validation tone is emitted and the
screen returns to previous menu.
7.2
Handset Tones
7.2.3 Activate/deactivate key
tone
7.2.1 Set the ring volume
Danger
A single tone is emitted when a key is
pressed. You can enable or disable the
key tone. By default, the key tone is ON
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
.
Press m key in idle mode, scroll
1
: to PERSONAL SET and press
<OK, press <OK to enter
HANDSET TONES, scroll : to
There are 5 ringer volume options (OFF
,
KEY BEEP
OK.
Scroll :atnod press <
ON or OFF and press
LEVEL 1
,
LEVEL 2, LEVEL 3 and LEVEL 4).
2
The default level is LEVEL 2
.
<OK to confirm.
Press m key in idle mode, scroll
: to PERSONAL SET and press
<OK, press <OK to enter
1
•
A validation tone is emitted and the
screen returns to previous menu.
HANDSET TONES and press <OK
again to enter RING VOLUME
.
28
Personal settings
7.3
Change the display language
Your handset can support different
display languages.
Press m key in idle mode, scroll
1
: to PERSONAL SET and press
<OK, scroll : to LANGUAGE
and press <OK.
Scroll :to your desired language
2
and press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Tip
Once the display language is set, the
option menus on the handset will switch
to display in the selected language
immediately. However, it will not change
the language of the predefined outgoing
message of your answering machine.
7.4
Activate/deactivate auto
hang-up
This function enables you to end a call
automatically by simply placing the
handset on the base station. By default,
the Auto Hang up feature is ON
.
Press m key in idle mode, scroll
: to PERSONAL SET and press
<OK, scroll : to AUTO HANG-
1
UP and press <OK
.
Scroll : to ON or OFF and press
2
<OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Personal settings
29
8.2
Set date/time format
8
Clock and Alarm
You can set your preferred date/time
format for your phone. The default
This feature allows you to set the date,
time and alarm settings for your phone.
The default date and time is 2008/01/01
and 12:00 am respectively.
format is MM/DD and 12 HOURS
.
8.2.1 Set time format
Press m in idle mode, scroll :
to CLOCK & ALARM and press
<OK, scroll :to SET FORMAT
and press <OK.
1
8.1
Set date and time
Press m in idle mode, scroll :
to CLOCK & ALARM and press
<OK, press <OK to enter SET
1
Press <OK to enter TIME
2
3
FORMAT
.
DATE/TIME
.
•
The current setting is displayed.
The last stored date is displayed.
Enter the current date (YYYY/MM/
DD) and press <OK.
2
3
Scroll : to select time format
display (12 HOURS or 24 HOURS
and press <OK to confirm.
)
The last stored time is displayed.
Enter the current time (HH:MM) and
•
A validation tone is emitted and the
screen returns to previous menu.
scroll : to select am or pm
.
Press <OK to confirm.
8.2.2 Set date format
•
A validation tone is emitted.
Press m in idle mode, scroll :
1
Note
to CLOCK & ALARM and press
<OK, scroll :to SET FORMAT
and press <OK.
An error tone will be emitted if an invalid
digit is entered in the date/time fields.
Hour: 00 to 12; Minute: 00 to 59
Date: 01 to 31; Month: 01 to 12
Scroll : to enter SET FORMAT
2
and press <OK.
!
•
The current setting is displayed.
Warning
Scroll : to select date format
display (DD/MM or MM/DD) and
press <OK to confirm.
3
If your phone is connected to an ISDN
line through an adaptor, the date & time
may be updated after each call. The
availability of date & time update is
dependent on your network provider.
Please check the date & time settings in
your ISDN system or contact your
network provider.
•
A validation tone is emitted and the
screen returns to previous menu.
8.3
1
Set alarm
Press m in idle mode, scroll :
to CLOCK & ALARM and press
<OK, scroll : to ALARM and
press <OK.
30
Clock and Alarm
Scroll :to OFF, ON ONCE or ON
2
3
DAILY and press <OK
.
If you select ON ONCE or ON
DAILY, enter the time (HH:MM) for
the alarm and scroll : to select
am or pm. Press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Note
The alarm tone and alarm icon
will
only sound/blink for 1 minute when the
alarm time is reached. To mute the alarm
tone, simply press any key on the handset.
8.4
Set alarm tone
Press m in idle mode, scroll :
to CLOCK & ALARM and press
<OK, scroll :to ALARM TONE
and press <OK.
1
Scroll : to MELODY 1
,
MELODY
2
2
or MELODY 3 and press <OK to
confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Clock and Alarm
31
9.2
Registration
9
Advanced settings
The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 4 handsets can be registered to one
base station.
9.1
Change Master PIN
The Master PIN is used for accessing the
answering machine remotely. The default
Master PIN number is 0000. The
maximum length of the Master PIN is 8
digits. This PIN is also used to protect the
settings of your handset. Your handset
will prompt you whenever the PIN is
required.
Insert battery to power up the
handset. The LCD displays "PRESS
OK KEY TO REGISTER".
Press <OK on handset, the LCD
displays "HOLD LOCATOR KEY
DURING 5s".
Within 5 minutes, press the locator
key on base station to start
registration.
1
2
3
Note
The default pin code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN
code.
Press m key in idle mode, scroll
1
: to ADVANCED SET and press
<OK, scroll : to CHANGE PIN
and press <OK.
If registration succeeds, the handset
returnsto idle mode.
If registration fails, the LCD will
display "PRESS OK KEY TO
REGISTER". Repeat the process
again.
4
5
Enter the Master PIN when
prompted and press <OK to
confirm.
2
3
•
The PIN entered will be shown as
asterisks (*) on the screen.
9.3
Unregister
Enter the new PIN and press <OK
Press m key in idle mode, scroll
: to ADVANCED SET and press
<OK, scroll : to UNREGISTER
and press <OK.
1
to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Tip
Scroll :to select the handset
number to unregister and press <OK.
2
If you forget your PIN, you will need to
reset your phone to its default settings.
See “Reset unit” on chapter 9.4 for more
details.
•
A validation tone is emitted to indicate
successful unregistration and the
screen return to previous menu.
32
Advanced settings
Note
is set, the phone automatically filters
the area code for all incoming calls, by
removing the area code for local calls and
retaining the area code for calls from other
areas. If it is a local call, then only the phone
number of the caller is displayed during an
incoming call or when you call the number
from the call log. If it is a long distance call,
then both the area code and phone number
will be displayed in a proper format to be
dialed out directly from the call log, or
saved into the phonebook.
If no action is taken on the handset within
15 seconds, the unregistration procedure
will be aborted and the handset returns
to idle mode.
To unregister a handset that does not
belong to the CD150/155 range, you can
only use the CD150/155 handset to
unregister it.
9.4
Reset unit
You can reset your phone to its default
settings with this feature.
Note
!
You can enter a maximum of 3 digits for
the area code. You need to subscribe to
Caller Line Identification service to be
able to see the caller’s number or name in
the call log. See “Using the call log” on
chapter 6.7 for details.
Warning
Upon reset, all your personal settings, call
log and redial list entries will be deleted
and the phone will return to its default
settings. However, your phonebook will
remain unchanged after reset.
Press m in idle mode, scroll :
1
Note
to ADVANCED SET and press
<OK, scroll : to AREA CODE
and press <OK.
You may have to configure your phone
once again.
Press m key in idle mode, scroll
1
Enter the local area code (maximum
2
: to ADVANCED SET and press
<OK, scroll : to RESET and
press <OK.
3 digits) and press <OK to save.
•
A validation tone is emitted and the
screen returns to previous menu.
CONFIRM? is displayed on the
screen.
2
3
9.6
Set prefix
Press <OK again to confirm.
This feature allows you to define a prefix
number to be added to the beginning of a
number during predialling (see
“Predialling” on chapter 5.1.1). You may
also use this feature to add a detect string
to match and replace the first few digits of
the number during predialling.
You can enter up to a maximum of 5
digits for the detect string and auto prefix
number respectively.
•
•
A validation tone is emitted.
The unit is reset to its default
settings. (see “Default settings” on
chapter 9.10)
9.5
Set area code
This feature is useful when you have
subscribed to Caller Line Identification
service. It allows you to set an area code
in your CD155. Once the local area code
Advanced settings
33
Press m key in idle mode, scroll
: to ADVANCED SET and press
<OK, scroll : to AUTO PREFIX
and press <OK.
Press m key in idle mode, scroll
: to ADVANCED SET and press
<OK, scroll : to FLASH TIME
and press <OK.
1
2
3
1
2
Scroll :to SHORT MEDIUM or
LONG and press <O,K to confirm.
DETECT DIGIT is displayed on the
screen. Press <OK to enter.
•
A validation tone is emitted and the
screen returns to previous menu.
•
The last stored detect string is
displayed (if any).
Enter a detect string number
(maximum 5 digits) and press <OK
to confirm.
9.8
Change the dial mode
The default value for dial mode that is
preset in your handset should be the best
suited for your country network and
therefore you should not need to change it.
•
A validation tone is emitted and the
screen returns to previous menu.
Press :to scroll to PREFIX. Press
4
5
There are two dial modes: Tone or Pulse
.
<OK to enter.
Press m key in idle mode, scroll
1
•
The last stored prefix number is
displayed (if any).
: to ADVANCED SET and press
<OK, scroll : to DIAL MODE
and press <OK.
Enter the prefix number (maximum
10 digits) and press <OK to confirm.
Scroll : to TONE or PULSE and
2
•
A validation tone is emitted and the
screen returns to previous menu.
press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Note
If no detect string (blank) is entered, the
prefix number will be automatically added
to the predial number after r key is
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after r key is pressed.
9.9
Set first ring
When this function is set to Off, the first
ring from a voice call will not sound. This is
particularly useful in countries where calling
line identity is sent after the first ring.
Consequently, the phones in the house will
not ring when a message arrives.
9.7
Change flash time
Press m in idle mode, scroll :
1
Flash time (or dial delay) is the time delay
by which the line will be disconnected
after you press r key. It can be set to
short, medium or long.
The default value of flash time that is preset
in your handset should be the best suited
for your country network and therefore
you should not need to change it.
to ADVANCED SET and press
<OK, scroll to FIRST RING and
press <OK.
Scroll : to ON or OFF and press
2
<OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
34
Advanced settings
9.10 Default settings
Ringer Volume
Tone Melody
LEVEL 2
FLICK
Earpiece Volume VOLUME 2
Key Tone
ON
Language
Auto Hang Up
Country dependent
ON
Handset Name PHILIPS
Time/Date
2008/01/01; 12:00am
Time format
Date format
Dialing Mode
Flash Time
First Ring
Master PIN
Alarm
12 HOURS
MM/DD
Country dependent
Country dependent
Country dependent
0000
OFF
Alarm Tone
Auto Prefix
Area Code
Answering Machine
Answer Mode
MELODY 1
EMPTY
EMPTY
ANSWER & REC
mode
5
Number of rings
before answer
Outgoing
Messages
Handset
EMPTY
OFF
screening
Remote access
Base speaker
DEACTIVATE
LEVEL 5
Advanced settings
35
10 Telephone answering machine (TAM)
Your phone features an answering machine that records unanswered calls when it is
activated. The answering machine can store up to 99 messages. The maximum
recording time is 18 minutes.
You can use the control keys on the base station to perform the basic functions of the
answering machine such as paging, message playback, deleting messages and adjustment of
volume on the base station. For a description of each function of the control keys on the
base station, please see “Overview of the base station” on chapter 3.4 for more details.
You can also use the answer machine menu on the handset to access the answering
machine functions and to set the answering machine options.
To begin, press o key on your base station to switch on the answering machine.
Alternatively, you may switch on the answering machine via your handset (see “Switch
the answering machine on/off via handset” on chapter 10.3).
10.1 Play
10.1.1 Answering machine control keys on the base station
Buttons on the
base station
Description
Press to turn on/off the answering machine
o
Press to play the message or stop the message playback
p
f
Press to delete the current message
Press and hold for two seconds to delete all the old
messages in idle mode
Press to go back to previous message if it is pressed within
one second of current message playback
R
Press to replay current message if it is pressed after one
second of current message playback
Press to skip the current message and play the next message
s
Decrease (-) or increase (+) speaker volume during message
playback
- +
Press to page the handset
Press and hold for more than three seconds to start
registration procedure
V
36
Telephone answering machine (TAM)
10.1.2
10.1.3 Playback of new messages via handset
The last recorded message is played first via the loudspeaker. When all new messages
have been played, the answering machine will stop and the
icon stops blinking.
Press m key in idle mode, scroll :to ANSWER MACHINE and press <OK
,
1
press <OK to enter PLAY menu.
•
During playback, the message number, the date and the time of the current message
are displayed on the screen. LED indicator around the Play/Stop key on the base
station blinks.
Note
Press loudspeaker keypad to deactivate the loudspeaker during playback.
During playback, you can:
2
Adjust volume
Stop playback
Repeat
Press : key.
Press cBACK to return to PLAY menu.
Press m and press <OK to enter REPEAT
.
Next message
Press m, scroll : to NEXT and press <OK.
Previous
message
Press m, scroll :to PREVIOUS and press <OK.
Delete
message
Press m, scroll : to DELETE and press <OK.
A validation tone is emitted and the screen returns to previous menu.
press m to select the available
10.1.4 Playback of old messages via
handset
Old messages can only be played if there
are no new messages. The last recorded
message will start to play until the first
recorded message.
options (see options available under
see “Playback of new messages via
handset” on chapter 10.1.2).
10.2 Delete all messages
!
Warning
Messages deleted cannot be recovered.
Press m key in idle mode, scroll
1
: to ANSWER MACHINE and
press <OK, press <OK to enter
PLAY menu.
Note
Unread messages will not be deleted.
Press <OK to start playback
2
Press m key in idle mode, scroll
1
•
The last recorded message will start to
play until the first recorded message.
: to ANSWER MACHINE and
press <OK, scroll :to DELETE
During message playback, you can
3
ALL and press <OK
.
Telephone answering machine (TAM)
37
CONFIRM? is displayed on the
screen.
2
Options
Description
available for
Personalized
OGM
Press <OK again to confirm
deletion of all your messages.
•
A validation tone is emitted and the
screen returns to previous menu.
Play OGM* Press <OK to playback
existing outgoing
messages (if any)
10.3 Switch the answering
machine on/off via handset
Record
Press <OK to start
Messages** recording the outgoing
message, press <OK
again to stop and save the
recording.
Press m key in idle mode, scroll
1
: to ANSWER MACHINE and
press <OK, scroll : to
ANSWER ON/OFF and press <OK
.
Scroll : to ON or OFF and press
2
Note
<OK to confirm.
The maximum length of
an outgoing message is 2
minute.
•
A validation tone is emitted and the
screen returns to previous menu.
Delete
OGM
Press <OK to delete
thepersonalizedoutgoing
message and change back
to default OGM.
10.4 Record your personalised
outgoing message (OGM)
This personal outgoing message replaces
the default ones. To revert to the default
outgoing message, simply delete the
personal outgoing message you have
recorded. If you are not satisfied with the
recorded outgoing message, simply
record a new message to overwrite the
old one.
**When you record a new personalized
outgoing message, the previous one is
overwritten automatically.
10.5 Set the answer mode
There are 2 answer modes available:
Answer Only and Answer & Record
By default, the answer mode is ANSWER &
REC, by which your correspondent can
leave a message on the answering machine.
This can be changed to ANSWER ONLY
mode, by which your correspond cannot
leave any messages on the answering
machine.
Press m key in idle mode, scroll
1
: to ANSWER MACHINE and
press <OK, scroll : to
RECORD OGM and press <OK
,
Scroll to ANSWER ONLY or
2
ANSWER & REC and press <OK to
select the following outgoing
message options:
Press m key in idle mode, scroll
1
: to ANSWER MACHINE and
press <OK, scroll : to
ANSWER MODE and press <OK
.
38
Telephone answering machine (TAM)
Scroll : to ANSWER ONLY
ANSWER & REC and press <OorK
.
2
10.6.2 Remote control access
If you are far away from home and want to
check the messages on your answering
machine, you can make use of the remote
access feature to check your messages
using another phone. Once you dial your
home number from any other phone and
enter the remote access code*, you will be
able to obtain the messages on your
answering machine. The keypad on the
phone you use to dial acts like the functions
on your answering machine where you can
play or delete messages, turn your
•
The answer mode is set.
Note
Depending on the answer mode you have
selected, the appropriate default outgoing
message is played once the answering
machine picks up an incoming call.
10.6 Answering machine settings
10.6.1 Ring delay
This is the number of rings before the
answering machine answers and starts
playing your greeting message. You can
set the answering machine to start playing
your greeting message after 2 to 7 rings
answering machine on or off, etc.
Note
This feature is deactivated by default.
* Remote access code (which is the same
as your Master PIN code) prevents any
unauthorised remote access of your
answering machine.
or Economy. The default ring delay is
5.
Press m key in idle mode, scroll
: to ANSWER MACHINE and
press <OK, scroll : to
1
SETTINGS and press <OK, press
<OK to enter RING DELAY
.
10.6.2.1 Activate/deactivate
remote access
Scroll :to your desired ring delay
2
setting ( to 7 RINGS or
2
Press m key in idle mode, scroll
1
ECONOMY) and press <OK to
: to ANSWER MACHINE and
press <OK, scroll : to
SETTINGS and press <OK, scroll
: to REMOTE ACCESS and press
<OK.
confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Tip
Scroll : to ACTIVATE or
2
Economy mode can save you the cost of a
long distance call when you check your
message remotely. If there are new
messages in your answering machine, the
outgoing message will start playing after 3
rings. If there are no new messages, the
outgoing message will be played after 5 rings
DEACTIVATE and press <OK to
confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Telephone answering machine (TAM)
39
9
Turn off the answering
machine
10.6.2.2 Controlling the
answering machine from
an external call
From another phone, dial home.
Note
1
If the answering machine is off, the phone
will enter into the remote access mode
after 10 rings. Enter the remote access
PIN (default is 0000) to activate the
remote access feature.
•
The answering machine answers
and starts playing your greeting
message.
Within 8 seconds, press # key on the
phone you used to dial and enter the
remote access code (same as your
Master PIN code).
2
10.6.3 Set voice language
This menu allows you to change the
language of the predefined outgoing
message. The availability of this menu and
the language options available are country
dependent.
•
If the access code is incorrect, an
error tone will be emitted. After the
error tone is emitted, you can try to
press the remote access code again
until you enter the correct number.
The answer machine will drop the
line immediately if there is no
detection of the master PIN entry
within 8 seconds.
Press m in idle mode, scroll :
1
•
•
to ANSWER MACHINE and press
<OK, scroll :to SETTINGS and
press <OK, scroll :to
LANGUAGE and press <VOICE
OK.
If the remote access code is correct,
a validation tone can be heard.
•
The current selected language is
highlighted.
The following table indicates how to
access the below features during remote
access procedure:
Keys
#
Scroll :to your preferred
2
language and press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Description
Enter the remote access
code if the answering
machine is on and outgoing
message is playing.
10.6.4 Call screening
Call screening allows you to hear the
caller while he is leaving a message. You
can then decide if you want to talk to the
caller directly.
1
2
3
6
7
Return to previous message
Play the message
Skip to next message
Delete current message
Turn on the answering
machine
From the base,
You can use + and - to adjust the
speaker's volume during call screening.
The lowest volume level turns call
screening off.
8
Stop message playback
40
Telephone answering machine (TAM)
11 Technical data
Display
Relative humidity
•
•
Progressive LCD backlight
•
•
Operation: Up to 95% at 40°C
Storage: Up to 95% at 40°C
The backlight remains on for 15
seconds after each activation such as
an incoming call, key presses, lifting the
handset off the base station, etc.
The colour of the LCD backlight is
Amber.
•
General telephone features
•
Dual mode caller name & number
identification
•
5 standard ringer melodies and 5
polyphonic ringer melodies
Phonebook list, Redial list
and Call log
•
•
•
Phonebook list with 50 entries
Redial list with 5 entries
Call log with 10 entries
Battery
•
2 x HR AAA NiMh 550 mAh batteries
Power consumption
•
Power consumption at idle mode:
around 800mW
Temperature range
•
Operation: Between 0 and 35º C (32
to 95º F).
•
Storage: Between -20 and 45º C (-4 to
113º F).
Technical data
41
12 Frequently asked
questions
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
Connection
Sound
The handset does not switch on!
Handset does not ring!
Check that the RING VOLUME is not set
to RINGER OFF, and make sure icon is
not displayed on the screen (see “Set the
ring volume” on chapter 7.2.1).
•
Charge the batteries: Put the handset on
the base station to charge. After a few
moments, the phone will switch on.
The handset does not charge!
•
Check charger connections.
Caller does not hear me!
Microphone may be muted: During a call,
press M.
icon is not blinking during
charge!
•
•
•
Battery is full: There is no need to
charge the battery.
There’s no dialling tone!
•
•
No power: Check the connections.
Batteries are empty: Charge the
batteries.
Bad battery contact: Adjust the
handset slightly.
Dirty contact: Clean the batteries
contact with a cloth moistened with
alcohol.
•
•
Move closer to the base station.
Wrong line cable used: Use the line
cable provided.
Communication is lost during a call!
•
•
•
Line adaptor is required: Connect the
line adaptor to the line cord.
Charge the battery
Move closer to the base station.
The phone is "Out of range"!
Move closer to the base station.
•
Set-up
SEARCHING... is displayed on handset
and
icon is blinking!
Frequent noise interference on my
radio or television!
•
•
•
Move closer to the base station.
Make sure that your base station is on.
Reset your unit and restart handset
registration.
•
Move the base station as far away as
possible from the electrical appliances.
42
Frequently asked questions
I cannot change the settings of my
voice mail
idle mode automatically when you place
the handset back on the base station.
•
Operator voice mail is managed by
your operator and not the phone itself.
Please contact your operator should
you want to change the settings.
Phonebook entry cannot be stored
Delete an entry to free memory
•
before saving your contact again.
Product behaviour
The Master PIN code is wrong!
•
The default master PIN is 0000.
Keypad does not work!
•
Unlock your keypad: Long press *in
•
Reset the handset to revert to the default
master PIN code if it has been changed
before (see “Reset unit” on chapter 9.4).
idle mode.
The handset warms up when
making a long call!
•
The answering machine does not
record messages!
•
This is a normal behavior. The handset
consumes energy while calling.
Memory is full: Delete your old
messages.
The handset cannot be registered to
the base station!
•
The ANSWER ONLY mode has been
activated. Deactivate ANSWER ONLY
and activate ANSWER & REC mode (see
“Set the answer mode” on chapter 10.5).
•
Maximum number of handsets (4) has
been reached. To register a new
handset, unregister an existing
handset.
Remote control access does not
work!
Activate Remote Control Access (see
“Remote control access” on chapter
10.6.2).
•
•
Remove and replace the handset
batteries.
•
Try again by disconnecting and
connecting the base station power
supply and follow the procedure to
register a handset (see “Registration”
on chapter 9.2).
The phone hangs up during remote
access!
You have taken more than 4 seconds
to enter the Master PIN code. Enter
the code again within 4 seconds.
•
Caller number is not displayed!
•
Service is not activated: Check your
subscription with your network
operator.
Answering machine stops before
the recording is finished!
•
Memory is full: Delete your old messages.
My handset keeps going into idle
mode!
•
If there are no key presses for 15
seconds, the handset will automatically
return to idle mode. It will also return to
Frequently asked questions
43
13 Index
I
A
Install battery 15
Install phone 14
Intercom 26
Accessories 9
Alarm 30
Alarm tone 31
Answer a call 20
Answer an external call 26
Answering machine mode 38
Auto hang-up 29
K
Key tone 28
Keypad lock/unlock 21
C
L
Call in progress 21
Call log 19, 24
Language 29
LCD Backlight 41
LED indicator 13
Loudspeaker mode 21
Loudspeaker volume 22
Call screening 40
Charge battery 15
Clock and alarm 30
Conference call 26
Connect base station 14
M
Make a call 19
Master PIN 32
Menu structure 17
Mute 21
D
Date and time 30
Default settings 35
Delete a call list entry 25
Delete a redial number 24
Delete call list 25
O
Overview of the base station 13
Overview of your phone 10
Delete phonebook 23
Delete redial list 24
Dial mode 34
Direct dialling 19
Display icons 12
P
Page 36
Phonebook 19, 22
Predialling 19
Prefix 33
E
End a call 20
R
H
Recall time 34
Handset locating 27
Handset name 28
Recycle your batteries 7
Redial list 19, 24
Registration 32
Remote control access 39
Reset unit 33
Ring delay 39
Ring volume 28
Handset tones 28
Handsfree answering 20
44
Index
S
Save a redial number 24
Set area code 33
Store a contact 22
Switch handset on/off 21
T
Telephone answering machine 36
Text or number entry 21
Tones Melody 28
Transfer an external call 26
U
Unmute 21
Unregister 32
V
Volume 21
Index
45
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner
P r i n t e d i n C h i n a
Document number: 3111 285 42492
|