COLOR TELEVISION
AND
REMOTE CONTROL
(USE AND SET-UP GUIDE)
OWNER’S MANUAL
▼
▲
MENU
▼
CH
▲
–▼
VOL +▲
POWER
FEATURES
TABLE OF CONTENTS
Getting Started
• First Time Set Up which automatically sets
the TV for local channels and the correct pic-
ture signal (antenna or cable).
NOTE: This owner's manual is used with
several different television models. Not all
features (and drawings) discussed in this
manual will necessarily match those found
with your television set. This is normal and
does not require you contacting your dealer
or requesting service.
Warning/Precautions..............................................1, 8
Hooking Up Your TV ................................................2
VCR to TV Antenna Connections .............................2
• Infrared Remote Control which works your
TV as well as all on-screen feature controls.
Basic TV and Remote Control Operation .................3
How to Use the First Time Set-Up ...........................3
• Standard Broadcast (VHF/UHF) or Cable
TV (CATV) channel capability.
On-Screen Features
✧Setting the TV for Cable TV Operation .............4
✧Adding Channels in Memory (Manually) ..........4
✧Using the TV Volume Bar Control ....................5
✧Setting the TV Sleep Timer Control...................5
✧Using the TV Stereo Control..............................6
✧How to Set the TV for Closed Captioning ........6
✧Using the TV Picture and Color Controls .........7
For Customer Use
• Closed Captioning which allows the viewer to
read TV program dialogue or voice conversa-
tions as on-screen text.
Enter (below) the Serial Number and the
Model Number of this television
(located on the rear of the TV cabinet).
• Automatic Programming of Channels for
quick and easy selection of favorite stations
available in your area.
Retain this information for future reference.
• Sleep-Timer which automatically turns the TV
OFF at preset times.
General Information
Model No. __________________________
• Language control allows the user to select
from three options; English, Spanish or
French. This controls the On-Screen Menu text
only. (Does not work for Closed Captioning.)
Glossary of TV Terms................................................7
Tips if Something Isn’t Working ...............................8
Index ..........................................................................8
Warranty.....................................................................8
• Stereo TV with built-in audio amplifier and
twin speaker system for receiving TV pro-
grams broadcast in stereo sound.
Serial No.___________________________
Return your Warranty Registration card today to ensure you
receive all the benefits you’re entitled to.
Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product.
So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Warranty
Owner
Model
Verification
Confirmation
Registration
Registering your product within 10 days
confirms your right to maximum protection
under the terms and conditions of your
PHILIPS MAGNAVOX warranty.
Your completed Warranty
Returning your Warranty Registration Card
right away guarantees you’ll receive all
the information and special offers which
you qualify for as the owner of your model.
Registration Card serves as
verification of ownership in the
event of product theft or loss.
Congratulations on your purchase, and welcome to the “family!”
Dear PHILIPS MAGNAVOX product owner:
Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, best-backed products
available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and out-
standing service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to
accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome–and thanks for investing in a PHILIPS MAGNAVOX product.
Sincerely,
P.S. Remember, to get the most from your PHILIPS MAGNAVOX product, you must return
your Warranty Registration Card within 10 days. So please mail it to us right now!
Robert Minkhorst
President and Chief Executive Officer
t
This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety
of everyone in your household, please do not remove product covering.
Know these
safetysymbols
C AUTION
s
The “exclamation point” calls attention to features for which you should read the enclosed literature closely to pre-
vent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
RIS K OF ELECTRIC S HOCK
DO NOT OP EN
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu’au fond.
CAUTION: TO REDUCE THE RIS K OF ELECTRIC S HOCK, DO NOT
REM OVE COVER (OR BACK). NO US ER-S ERVICEABLE P ARTS
INS IDE. REFER S ERVICING TO QUALIFIED S ERVICE P ERS ONNEL.
1 - IB7755 E001
HOW TO USE AND SETUP OUR TV FOR THE FIRST TIME
SMART
HELP
Remember,
you can press
TELEVISION
BEGIN
Press the VOLUME UP
(▲) or DOWN (▼) button to
adjust the sound level.
Press the CHANNEL UP
(▲) or DOWN (▼) button to
select TV channels.
Press the POWER
button to turn the TV ON.
any button on the
front of the TV to
turn the TV ON.The
tuned channel num-
ber will always
briefly appear when
the TV is first turned
ON (and with chan-
nel changes.) You
can also press the
STATUS button (on
the remote) to see
what channel the TV
is ON.
Press the MENU UP (▲) or
DOWN (▼) button to display
the TV’s on-screen menu. Then
press the MENU UP (▲) or
DOWN (▼) button to scroll
through the list of on-screen fea-
tures.
4
3
2
1
SETUP
PRESS
+
BRIGHTNESS
PICTURE
COLOR
▲
▲
▼ MENU
▼ CH
–▼ VOL ▲+ POWER
TINT
SHARPNESS
The SETUP on-screen control is auto-
matically selected when you first plug
in your TV and press the MENU but-
ton (on the TV or remote.)
▼
▲
MENU
▼
CH
▲
–▼
VOL +▲
POWER
SETUP MENU
AUTOMATIC SETTINGS
SMART
HELP
BEGIN
Press the STATUS/EXIT
button on the remote to clear
the screen after an adjustment,
or scroll to the “EXIT” option
in the SETUP screen and press
the VOL (+) button to bring
you back to the main on-screen
menu.
Press MENU (M)
button on the remote (or
MENU ▲ or ▼ buttons on the
TV). An on-screen list of fea-
tures appears on the TV screen.
Press the CH (+) or (–)
buttons on the remote (or the
MENU ▲ or ▼ buttons on the
TV) to select the SETUP feature
with the on-screen arrow.
Press the
remote’s STATUS
button (or use
“EXIT”) to back out
of the SETUP menu.
irst Time Setup takes care
Fof some basic TV control
settings for you. Follow the
steps in this section to quickly
add area channel numbers into
the TV’s memory, set the
Language, and the TV for
Antenna or Cable signal.
Remember, SETUP
is a first-use, one-
time operation and
will not have to be
repeated (even if the
TV is unplugged.)
Press the VOL (+) button to
access the SETUP on-screen
menu. Then, press the CH (+)
or (–) buttons to scroll the
SETUP options. Next press the
VOL (+) or (–) buttons as direct-
ed to use the selected menu items.
You can also just wait and after
a minute the MENU will drop
automatically from the screen.
ENGLIS
SPANISH
FRENCH
SETUP
LANGUAGE
With the Language feature
selected, press the VOL (+)
button to choose English,
Espanol (Spanish), or Francais
(French) for the TV’s on-screen
menu controls.
LANGUAGE
AUTO CABLE SELECT
AUTO PROGRAMMING
EXIT
BEGIN
REMOTE
PRESS + TO SELECT LANGUAGE
Point the remote
control toward the remote
sensor window on the TV
when operating the TV with
the remote.
ENGLISH
ESPANOL
FRANCAIS
Battery Lid
o load the supplied batter-
Ties into the remote:
1. Remove the battery com-
partment lid on the back of
the remote.
AUTO CABLE SELECT
2. Place the batteries (2-
AAA) in the remote. Be
sure the (+) and (-) ends of
the batteries line up correct-
ly (inside of case is
SETUP
LANGUAGE
AUTO CABLE SELECT
AUTO PROGRAMMING
EXIT
With Auto Cable Select cho-
sen, press the VOL (+) button
to automatically determine if
cable channels are present.
PRESS + TO DETERMINE
IF CABLE CHANGES ARE PRESENT
Battery Compartment
marked.)
3. Reattach the battery lid.
AUTO CABLE SEARCH
PLEASE W AIT
Channel Scan Button
AUTO CABLE SEARCH
Press to scan up or down through
channel numbers. (Also can be
used with the MENU button to
select on-screen controls. With the
Menu displayed, press Channel ▲
or ▼ buttons to move up or down
the list of controls.)
TV set to receive Cable TV
supplied channels.
CABLE CHANNELS ARE PRESENT
Power Button
Press to turn TV ON and
OFF.
OR
TV set to receive Antenna
supplied channels
AUTO CABLE SEARCH
NO CABLE CHANNELS ARE PRESENT
STATUS/EXIT
POWER
CH
Volume (–) and (+)
Buttons
31
28
20
Press to adjust the TV
sound level. When used
with the MENU button,
press to adjust the selected
on-screen (MENU) feature
controls.
VOL
MENU
CH
VOL
AUTO
PROGRAMMING
8
Status/Exit Button
SETUP
MUTE
A/CH
Press to see the current channel
number on the TV screen. Also
press this button to clear the TV
screen after control adjustments.
LANGUAGE
AUTO CABLE SELECT
AUTO PROGRAMMING
EXIT
With the Auto Programming
feature selected, press the VOL
(+) button to automatically
store all available channels into
the TV’s memory.
1
4
2
3
PRESS + TO
AUTO PROGRAM CHANNELS
5
8
0
6
9
A/CH Button
Menu Buttons
Press to toggle between cur-
rent and previously viewed
channel.
7
Press the M button to show on-
screen controls. Press Channel (+)
or (–) buttons to move through the
list of controls. Press the Volume
(+) or (–) buttons to adjust the
MENU controls.
AUTOPROGRAM
CC
SLEEP
SEARCHING FOR
CHANNEL 1 2 FOUND
Number Buttons
AUTOPROGRAM
Press two number buttons
to select TV channels. For
example: to select channel
6... press "0" first; then "6".
SEARCH COMPLETED
Mute Button
Press to turn the sound OFF on the
TV. Press again to return the sound
to its previous level.
EXIT
EXIT
SETUP
LANGUAGE
AUTO CABLE SELECT
AUTO PROGRAMMING
EXIT
Pressing the VOL (+) button
with the Exit feature selected
will return you to the main on-
screen menu.
Sleep Button
Press to set the TV to auto-
matically turn itself OFF.
CC Button
PRESS + TO
EXIT
Press to select the Closed Captioning
mode. (CC w MUTE, CAPTION 1,
CAPTION 2, or OFF)
3 - IB7755 E001
ON-SCREEN MENU CONTROLS (CONTINUED)
BEGIN
SMART
HELP
CABLE
Press the MENU (M)
button on the remote, then the
CH (+) or (–) buttons (or press
the MENU ▲ or ▼ on the TV)
to select the word CABLE
Press STATUS button on
the remote control to clear the
screen.
Press the VOL (+) or (-)
buttons (on the TV or the
remote) to select either:
Try it out.
CABLE OR ANTENNA INPUT
Press the CHANNEL
(+) or (–) buttons and
scan the channels. CH
(+), (–) works only
after STATUS button
is pressed to clear the
screen (or Menu times
out - about 1 minute.)
OTE: If you went
YES- If you DO have Cable
TV connected to the
TV. Channels 1-125
Nthrough First Time Setup
(page 3), this task has already
been completed for you.
with the TV’s on-screen Arrow.
can be selected.
You need to make sure that
the TV is set to pick up either
Cable TV stations or Antenna
signals. In other words, the
TV needs to know whether
you have connected a Cable
TV signal or a normal anten-
na to its ANTENNA plug (see
page 2).
NO- If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
Remember, to set the
TV to select the chan-
nels on your Cable
system, or in your
area, see the "Auto
Programming" steps in
the SETUP section on
page 3, and “Adding
Channels ” in the sec-
tion below.
CABLE
CHANNEL
SLEEP
YES
NO
CAPTION
VOL. BAR
EXIT
3
STATUS/EXIT
CH
VOL
POWER
MENU
MUTE
VOL
CH
2
1
A/CH
2
4
3
5
7
6
8
CC
9
0
SLEEP
1
BEGIN
CHANNEL
Press the MENU (M)
button on the remote, then the
CH (+) or (–) buttons (or the
MENU ▲ or ▼ on the TV) to
select the word CHANNEL
with the TV’s on-screen Arrow.
Press the VOL (+) button
to SAVE the selected channel
number into memory.
Press the STATUS button
to clear the screen after adding
(or deleting) all the channels
you want.
Press Channel Number
buttons on the remote (or CH
▲ or ▼ buttons on the TV) to
select the channel you want to
SAVE (or DELETE.)
ADD/DELETE CHANNELS
uto Programming (see
Apage 3) adds all the
Press VOL (-) button to
DELETE a channel from
memory.
channels it can find (on your
Antenna or Cable TV system)
into the TV's memory.
Save/Delete channels makes
it easy for you to add other
channels, or drop unwanted
channels, from the list of
channels in the TV's memory.
12
CHANNEL
SLEEP
SAVED
CAPTION
VOL. BAR
EXIT
DELETED
SETUP
4
STATUS/EXIT
CH
1
3
VOL
MENU
MUTE
VOL
CH
1
A/CH
2
4
3
5
7
6
8
CC
9
SMART HELP
SLEEP
To SAVE a channel above 100, use the CH
▲▼ buttons on the TV. The remote number
buttons only go up to channel 99.
2
4 - IB7755 E001
ON-SCREEN MENU CONTROLS (CONTINUED)
BEGIN
SMART
HELP
VOLUME
Press the MENU (M)
button on the remote, then
press the CH (+) or (–) (or
press the MENU ▲ or ▼ but-
tons on the TV) to select the
word VOL. BAR with the
TV’s on-screen Arrow.
Press STATUS button to
clear the screen.
Press the VOL (+) or (-)
buttons to turn the VOL BAR
control ON or OFF.
Try it out.
VOLUME BAR
Press the VOL (+)
or (–) buttons. The
VOLUME BAR
should appear at the
bottom of the
se the Volume Bar con-
Utrol to see the TV’s vol-
ume level settings on the TV
screen. Once set the Volume
Bar will be seen each time
the VOLUME buttons (on the
TV or remote) are pressed.
screen.
NOTE: The TV's
volume level can
also be lowered
when the set is
turned OFF.
VOL. BAR
EXIT
SETUP
ON
BRIGHTNESS
PICTURE
COLOR
OFF
3
TATUS/EXIT
CH
1
VOL
POWER
MENU
E
VOL
CH
1
A/CH
2
4
3
5
7
6
8
CC
9
0
SLEEP
2
VOLUME
BEGIN
SMART
SLEEP
Press the SLEEP but-
ton on the remote.
Press the SLEEP button
HELP
Remember. If
you ever want to see how
many minutes are left
before the TV shuts itself
off, press the STATUS
button on the remote.
Press the STATUS button
to clear the screen after you
have set the time for the TV to
turn off.
repeatedly to pick the amount
of time (15 minutes to 2 hours
ahead) before the TV will turn
itself off.
SLEEP TIMER
OR
ave you ever fallen
Hasleep in front of the TV
only to have it wake you up
at two in the morning with a
test pattern screeching in
your ears? Well, your TV
can save you all that trouble
by automatically turning
itself off.
Press the MENU (M) button
on the remote, then press the
CH (+) or (–) (or press the
MENU ▲ or ▼ buttons on the
TV) to select the word SLEEP
with the TV’s on-screen Arrow.
An on-screen count down will
appear during the last minute
before the TV shuts itself off.
The VOL (+) or (-) buttons can
also be used to set the amount
of time.
If you want to stop a
SLEEP TIMER setting,
reset the timer back to
OFF. You could also turn
the TV off, and then back
on again, to cancel a set-
ting.
Pressing any key on the
remote or TV in the last
60 seconds will cancel the
SLEEP TIMER setting.
SLEEP
1 5 MIN
CAPTION
VOL. BAR
EXIT
SETUP
BRIGHTNESS
3
STATUS/EXIT
CH
VOL
POWER
MENU
MUTE
VOL
CH
1
A/CH
2
4
3
5
7
6
8
CC
9
1
0
SLEEP
SLEEP TIMER :58
2
During the last minute of a SLEEP TIMER setting
an on-screen count down will be displayed.
5 - IB7755 E001
ON-SCREEN MENU CONTROLS (CONTINUED)
BEGIN
SMART
HELP
Remember,
if the TV is
set to STEREO but
the current channel
is not broadcasted
in stereo, the sound
at the TV will
STEREO
Press the MENU (M)
button on the remote, then the
CH (+) or (–) buttons (or the
MENU ▲ or ▼ buttons on the
TV) to select the word STEREO
with the TV’s on-screen Arrow.
Press the STATUS but-
ton on the remote control to
clear the screen.
Press the VOL (+) or (–)
buttons to turn the STEREO
mode ON or off.
STEREO TV SOUND
our TV can receive
Ybroadcast stereo TV pro-
grams. The TV has both an
amplifier and twin speakers
through which the stereo
sound can be heard.
remain monaural.
STEREO
CABLE
ON
12
CHANNEL
SLEEP
CAPTION
VOL. BAR
1
3
STATUS/EXIT
VOL
R
OFF
M
MUTE
VOL
CH
STEREO
1
A/CH
2
4
3
5
7
6
8
CC
9
0
NOTE: The TV’s on-screen “STEREO”
SLEEP
indicator appears whenever the TV detects an
incoming stereo signal. Be sure the TV’s
STEREO control is also turned “ON” in order
for the stereo sound to be heard through the
TV’s twin speaker system.
2
BEGIN
SMART
CAPTION
Press MENU (M)
button on the remote, then
press the CH (+) or (–) (or
press the MENU ▲ or ▼ but-
tons on the TV) to select the
word CAPTION with the TV’s
on-screen Arrow.
HELP
Remember,
not all TV
Press the STATUS but-
Press VOL (+) or (-) but-
tons to select the desired
Closed Caption (CC) mode -
For Example: CAPTION 1.
ton after making your Caption
mode selection. The TV dis-
play will clear and Captioning
material (if available on the
currently selected TV program)
will appear on the TV screen.
CLOSED CAPTIONING
losed Captioning allows
Cyou to read the voice
content of television pro-
grams on the TV screen.
Designed to help the hearing
impaired, this feature uses
on-screen "text boxes" to
show dialogue and conversa-
programs and prod-
uct commercials are
made for broadcast
with Closed
Caption (CC) infor-
mation included.
Neither are all
Closed Caption
modes (CAPTION
1 or 2) necessarily
being used by a
broadcast station
during the transmis-
sion of a closed
caption program.
Refer to your area's
TV program listings
for the stations and
times of Closed
Caption shows.
Note: Usually “CAPTION 1" is
the most used mode to view
captioned material.
To cancel, set the CAPTION
feature to OFF when finished
viewing.
NOTE: The “CC W/MUTE” setting automatically switches the
TV to the Closed Caption 1 mode whenever the MUTE button
(on the remote control) is pressed. The Closed Caption 1 mode
will turn OFF when the TV sound is returned or unmuted.
tions while the TV program is
in progress.
Note: Broadcast stations will
often use spelling abbrevia-
tions, symbols, dropouts and
other grammatical shortcuts
in order to keep pace with the
on-screen action. These type
factors vary upon the source
of the captioned text material
and do not indicate a need
for service on the part of the
TV.
CAPTION
OFF
2
CC W MUTE
CAPTION
VOL. BAR
EXIT
CAPTION
1
SETUP
BRIGHTNESS
PICTURE
1
STATUS/EXIT
CH
VOL
POWER
MENU
3
TE
VOL
CH
1
A/CH
2
4
3
5
7
6
8
CC
9
0
SLEEP
JOHN: Why did they move the
meeting up to this week?
2
MARSHA: I don't know, but they
are pushing to close the deal.
CAPTION 1 or 2 mode: dialogue (and descriptions) for
the action on the captioned TV program shows on-screen.
(See Smart Help on this page.)
6
This symbol will appear
with channels that contain
Closed Captioning material.
CC
6 - IB7755 E001
ON-SCREEN MENU CONTROLS (CONTINUED)
BEGIN
SMART
HELP
PICTURE
Press the MENU (M)
button on the remote, then
press the CH (+) or (–) (or
press MENU ▲ or ▼ button-
son the TV) until the desired
control shows on-screen.
Press STATUS button (or
EXIT Menu) to clear the screen
when picture adjustments are
completed.
Press the VOL (+) and (-)
to adjust the selected picture
control.
Remember,
PICTURE ADJUSTMENTS
with the bar scale
centered the control
settings are at normal
mid-range levels.
o adjust your TV picture
Tcontrols, select a channel
and follow the steps shown to
the right.
BRIGHTNESS
PICTURE
COLOR
BRIGHTNESS
TINT
PICTURE
SHARPNESS
CABLE
COLOR
TINT
BRIGHTNESS
PICTURE
COLOR
1
SHARPNESS
CABLE
TINT
3
SHARPNESS
CABLE
BRIGHTNESS
PICTURE
COLOR
STATUS/EXIT
TINT
VOL
ER
SHARPNESS
CABLE
ME
BRIGHTNESS
PICTURE
COLOR
MUTE
VOL
CH
1
A/CH
2
TINT
4
3
SHARPNESS
CABLE
5
7
6
8
CC
9
0
SLEEP
2
BRIGHTNESS Press VOL (-) or (+) until darkest parts of the picture are
as bright as you prefer.
PICTURE Press VOL (-) or (+) until lightest parts of the picture show
good detail.
COLOR Press VOL (-) or (+) to add or eliminate color.
TINT Press VOL (-) or (+) to obtain natural skin tones.
SHARPNESS Press VOL (-) or (+) to improve detail in the picture.
GLOSSARY
Round Cable 75Ω * A single solid antenna wire normally matched with a metal
plug (F-type) end connector that screws (or pushes) directly onto a 75 Ohm input
found on the Television or VCR. (Also known as Coaxial Cable.)
Programming * The procedure of adding or deleting channel numbers into the
Television’s memory circuits. In this way the Television “remembers’’ only the local-
ly available or desired channel numbers and skips over any unwanted channel num-
bers.
Display * An on screen message or graphics that help the user operate and adjust
his Television feature controls. See On Screen Displays (OSD).
Remote Sensor Window * A window or opening found on the Television control
panel through which infrared remote control command signals are received.
Status * Allows the user to quickly confirm what channel number is currently being
viewed. Status can also be used to clear the Television of on screen displays or infor-
mation (rather than waiting for the displays to “time out” or automatically disappear
from the screen).
Jack Panel * Refers to the area on the back of the TV cabinet where the input and
output connections are located.
On Screen Displays (OSD) * Refers to the wording or messages generated by the
television (or VCR) to help the user with specific feature controls (color adjust-
ment, programming, etc.).
Twin Lead Wire * The more commonly used name for the two strand 300 Ohm
antenna wire used with many indoor and outdoor antenna systems. In many cases this
type of antenna wire requires an additional adapter (or balun) in order to connect to
the 75 Ohm Input terminals designed into the more recent Televisions and VCRs.
Menu * An on-screen listing of feature controls shown on the Television screen
that are made available for user adjustments.
Volume Bar * When in the ON position, this feature displays an on-screen display
of the TV’s volume setting.
7 - IB7755 E001
GENERAL INFORMATION
BEGIN
TIPS
No Power
Remote Doesn't
Work
Cleaning and Care
No Sound
• Check the VOLUME buttons.
• Check the MUTE button on
the remote control.
• Check the TV power cord.
Unplug the TV, wait 1
TROUBLESHOOTING
• Unplug the TV before clean-
ing.
• Check batteries. Replace
with AAA Heavy Duty (Zinc
Chloride) or Alkaline batter-
ies if necessary.
• Clean the remote and the
remote sensor window on the
TV.
• Check the TV power cord.
Unplug the TV, wait 1
minute, then reinsert plug
into outlet and push POWER
button again.
lease make these simple
Pchecks before calling for
service. These tips can save
you time and money since
charges for TV installation
and adjustment of customer
controls are not covered
under your warranty.
minute, then reinsert plug
into outlet and push POWER
button again.
• Check to be sure outlet is not
on a wall switch.
• Avoid using anything abra-
sive that could scratch the
screen.
• Wipe the TV screen with a
clean cloth dampened with
water.
• Gently wipe cabinet surfaces
with a clean cloth or sponge
dampened with cool clear
water. Use a clean dry cloth
to dry the wiped surfaces.
• Occasionally vacuum the
ventilation holes or slots in
the cabinet back.
No Picture
• This TV is equipped with
protective circuitry that shuts
the TV off in case of moder-
ate power surges. Should
this occur turn the TV back
on by pressing the POWER
button once or twice, or
unplug (wait 10 seconds) and
then replug the power cord at
the AC outlet. This feature is
NOT designed to prevent
damage due to high power
surges such as those caused
by lightning, which is not
covered by your warranty.
• Check the CABLE/ YES NO
control for correct position.
• Check antenna connections
on the rear of the TV. Are
they properly secured to the
antenna plug on the TV?
CAUTION: A video source
(such as a video game,
Compact Disc Interactive -
CDI, or TV information
channel) which shows a con-
stant non-moving pattern on
the TV screen, can cause pic-
ture tube damage. When not
in use, turn the video source
OFF. Regularly alternate the
use of such video sources
with normal TV viewing.
• Never use thinners, insecti-
cide sprays, or other chemi-
cals on or near the cabinet.
Wrong Channel
(or no Channels
above 13)
• Repeat channel selection.
• Add desired channel num-
bers (CHANNEL control)
into TV memory.
• Check CABLE/ YES NO
control for correct position.
INDEX
Accessories . . . . . . . . . . . .2
Add Channels . . . . . . . . . .4
Antenna Connect . . . . . . . .2
Autoprogram . . . . . . . . . . .3
Batteries . . . . . . . . . . . . . . .3
Cable TV Connect . . . . . . .2
Cable TV Control . . . . . . . .4
Channel Memory . . . . . .3, 4
Closed Caption . . . . . . . . . .6
Coaxial Cable . . . . . . . . . .2
Controls/TV . . . . . . . . . . . .3
Controls/Remote . . . . . . . .3
Display . . . . . . . . . . . . . . .3
Features . . . . . . . . . . . . . . .1
First Time Use . . . . . . . . . .3
Glossary . . . . . . . . . . . . . .7
Language . . . . . . . . . . . . .3
Menu Button . . . . . . . . . . .3
Minus(-) Buttons . . . . . . . .3
Picture Adjustments . . . . . .7
Plus(+) Button . . . . . . . . . .3
Precautions . . . . . . . . . . .1, 8
Programming . . . . . . . . . . .3
Remote Control . . . . . . . . .3
RF Cable . . . . . . . . . . . . . .2
Safety Notes . . . . . . . . . . . .1
Service . . . . . . . . . . . . . . . .8
Sensor Remote . . . . . . . . . .3
SETUP . . . . . . . . . . . . . . . .3
Sleep Timer . . . . . . . . . . . .5
Status Button . . . . . . . . . . .3
Stereo Control . . . . . . . . . .6
Tips for Service . . . . . . . . .8
VCR Connections . . . . . . .2
Volume Bar . . . . . . . . . . . .5
Warranty . . . . . . . . . . . . . .8
WARRANTY
COLOR TELEVISION
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product can be repaired in-home.
W HO IS CO VERED?
You must have proof of purchase to receive warranty service. A sales receipt or other doc-
ument showing that you purchased the product is considered proof of purchase.
MAKE SURE YO U KEEP...
Please keep your sales receipt or other document showing proof of purchase. Attach it to
this owner’s manual and keep both nearby. Also keep the original box and packing material
in case you need to return your product.
W HAT IS CO VERED?
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service. Adjustments of the controls
discussed there may save you a service call.
Warranty coverage begins the day you buy your product. For 90 days thereafter, all parts will
be repaired or replaced free, and labor is free. From 90 days to one year from the day of
purchase, all parts will be repaired or replaced free, but you pay for all labor charges. From
one to two years from the day of purchase, you pay for the replacement or repair of all
parts except the picture tube, and for all labor charges. After two years from the day of pur-
chase, you pay for the replacement or repair of all parts, and for all labor charges.
TO GET W ARRANTY SERVICE IN U.S.A.,
PUERTO RICO O R U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or authorized service center to
arrange repair.
All parts, including repaired and replaced parts, are covered only for the original warranty
period. When the warranty on the product expires, the warranty on all replaced and
repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied war-
ranties of merchantability and fitness for a particular purpose, are limited in duration to the
duration of this express warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
•
•
•
labor charges for installation or setup of the product, adjustment of customer controls on
the product, and installation or repair of antenna systems outside of the product.
product repair and/or part replacement because of misuse, accident, unauthorized repair
or other cause not within the control of Philips Consumer Electronics Company.
reception problems caused by signal conditions or cable or antenna systems outside the
unit.
a product that requires modification or adaptation to enable it to operate in any country
other than the country for which it was designed, manufactured, approved and/or autho-
rized, or repair of products damaged by these modifications.
incidental or consequential damages resulting from the product. (Some states do not
allow the exclusion of incidental or consequential damages, so the above exclusion may
not apply to you. This includes, but is not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
TO GET W ARRANTY SERVICE IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
(In Canada, this warranty is given in lieu of all other warranties. No other warranties are
expressed or implied, including any implied warranties of merchantability or fitness for a par-
ticular purpose. Philips is not liable under any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever incurred, even if notified of the possibility of
such damages.)
•
• a product used for commercial or institutional purposes.
REMEMBER...
W HERE IS SERVICE AVAILABLE?
Please record the model and serial numbers found on the product below. Also, please fill
out and mail your warranty registration card promptly. It will be easier for us to notify you
if necessary.
Warranty service is available in all countries where the product is officially distributed by
Philips Consumer Electronics Company. In countries where Philips Consumer Electronics
Company does not distribute the product, the local Philips service organization will attempt
to provide service (although there may be a delay if the appropriate spare parts and technical
manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
Philips Service Com pany, P.O . Box 555, Jefferson City, Tennessee 37760
(423) 475-8869
8 - IB7755 E001
|