Title page
Nortel Communication Server 1000
Nortel WLAN Handset 6120 and
WLAN Handset 6140
User Guide
Contents
Contents
Contents 3
European Union Directives Conformance Statement 11
FCC Rules – Part 15 11
Charger information 12
International certifications 16
Specific Absorption Rate (SAR) information 17
Handset controls and descriptions 22
Status indicators 24
Modes of operation 25
Menu navigation 26
Shortcut Keys 26
Handset Displays 26
Feature Activation displays 27
Soft key labels 28
Cleaning your handset 29
Powering on and off the WLAN Handset 6120 and 6140 31
Locking the keypad 31
Unlocking the keypad 31
Making an internal call 31
Making an external call 31
Selecting a line 32
Entering a number 32
3
Contents
Redialing a number 32
Answering a call 32
Answering a call on a second line 33
Muting the microphone 33
Placing a call on hold 33
Resuming a held call 33
Hanging up 34
Adjusting the speaker volume 34
Changing the ring volume 34
Silencing the ringing 34
Opening the speed-dial list 34
Activating the speakerphone 34
Answering using the headset 35
Adjusting the headset volume 35
Changing the user profile 35
Opening the Personal Directory 35
Displaying additional features 36
Turning on the backlight 36
Facility-specific features 37
Speakerphone 37
Redial 37
Personal Directory 37
Real-Time Location System 37
Speed-dial call 38
The Config Menu 39
User-profiles 41
Default profile settings 42
Data entry and editing 42
Alphanumeric Entries 43
Push-to-talk 43
Security 46
The headset 47
Handset display 49
User Option menu 49
4
Contents
Locking the Keypad 50
Selecting a Language 50
Selecting Ring Options 51
Selecting Phone Options 56
Viewing system information 61
Entering Extension number 62
Setting up Push-to-talk 63
Call features 67
Making calls 69
Use Autodial 69
Activate Ring Again 70
Redial last number called 70
Use Speed Call 71
Make a System Speed Call 72
Use Conference Hotline 73
Place a call on hold 75
Transfer a call 75
Use Attendant Recall 76
Use Call Park 77
Record a Calling Party Number 77
Display incoming calls 78
Trace a malicious call 78
Incoming calls 79
Activate Call Pickup 79
Use Call Waiting 80
While away from your desk 83
Use Call Forward 83
Use Internal Call Forward 84
Talk with more than one person 85
5
Contents
Use Call Join 85
Set up a conference call 85
Use Conferee Selectable Display 86
Use Group Call 87
Activate Make Set Busy 91
Use Centrex/Exchange Switchhook Flash 93
Charge a call or charge a forced call 94
Use Forced Camp-on 96
Use Privacy Release 97
Branch Office 99
Normal Mode 99
Local Mode 99
Troubleshoot Branch Office 99
Hospitality features 101
Activate Message Registration 101
Use Maid Identification 102
Display Room Status 103
Battery packs 105
Low battery indicators 105
Removing and inserting the battery pack 106
Charging your handset 106
Desktop Chargers 108
Single Charger 108
Using the Single desktop charger 109
Cleaning the Desktop Charger 109
6
Contents
Dual Charger 111
Using the Dual Charger 112
Cleaning the Dual Charger 112
Quad Charger 114
Using the Quad Charger 114
Cleaning the Quad Charger 115
Terms you should know 117
7
Contents
8
Revision history
Revision history
December 2007
Standard 02.01. This document is up-issued to support
Communication Server 1000 Release 5.5.
November 2007
July 2007
Standard 01.05. This document is up-issued to include new
information about the Real-Time Location System (RTLS).
Standard 01.04. This document is up-issued to include new
information added to the Handset Display Section, Selecting
Phone Options.
July 2007
Standard 01.03. This document is up-issued to include document
feedback.
June 2007
May 2007
Standard 01.02. This document is up-issued to include new
regulatory information.
Standard 01.01. This document is issued to support
Communication Server 1000 Release 5.0.
9
Revision history
10
Regulatory and safety information
Regulatory and safety information
European Union Directives Conformance Statement
This device complies with the essential requirements and other relevant provisions of
directive 1999/5/EC. A copy of the Declaration may be obtained from
<http://www.nortel.com/corporate/community/environment/life_cycle/declarati
ons.html> or Nortel Networks GmbH address: Ingolstaedter Strasse 14-18, 80807
Munich Germany.
FCC Rules – Part 15
FCC registration number: IYG702X, IYG703X
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement: This portable device with its antenna complies
with FCC’s RF radiation exposure limits set forth for an uncontrolled environment.
To maintain compliance this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Industry Canada (IC) Notice
This device complies with RSS-210 of Industry Canada. Operation is subject to the
following two conditions: 1) This device may not cause interference, and 2) this
device must accept any interference, including interference that may cause undesired
operation of the device.
Privacy of communications may not be ensured when using this telephone.
Certification Number IC: 2128B-702X, 2128B-703X
WARNING
Changes or modifications to this equipment not approved
by Nortel can cause this equipment to not comply with
Part 15 of the FCC rules and void the user's authority to
operate this equipment.
11
Regulatory and safety information
CAUTION
This equipment contains no user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING
•
Follow standard acceptance procedures before
operating the WLAN Handset 6120 and 6140 near
life-support systems.
•
To minimize risk of interference, pacemaker users
should not carry the WLAN Handset 6120 and 6140
next to the pacemaker.
•
•
Avoid placing the handset near small metallic objects.
The handset earpiece attracts magnetic objects.
The WLAN Handset 6120 and 6140 produce noise
noticeable to hearing aid users. Use a headset
compatible with hearing aids.
•
The WLAN Handset 6120 and 6140 complies with Part
15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not
cause harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
•
•
Privacy of communications cannot be ensured when
using the WLAN Handset 6120 and 6140.
To prevent radio interference to the licensed service,
the WLAN Handset 6120 and 6140 must be operated
only indoors and kept away from windows to provide
maximum shielding.
Charger information
Charger models Nortel WLAN Handset 6100 Series Chargers (Single, Dual-slot and
Quad-slot Charger models).
This equipment has been tested and complies with the limits for a Class A digital
device, pursuant to Part 15 of FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
12
Regulatory and safety information
manual, can cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This Class A digital apparatus complies with Canadian ICES-003.
Operational warnings
WARNING
For vehicles equipped with an air bag: Do not place a
portable radio product in the area over the air bag or in
the air bag deployment area. An air bag inflates with great
force. If a portable radio is placed in the air bag
deployment area and the air bag inflates, the radio
product can be propelled with great force and cause
serious injury to occupants of the vehicle.
WARNING
Potentially explosive atmospheres: Turn off your radio
product prior to entering any area with a potentially
explosive atmosphere, unless it is a radio product type
especially qualified for use in such areas (for example,
Factory Mutual Approved). Do not remove, install, or
charge batteries in such areas. Sparks in a potentially
explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
CAUTION
Loud noise environment: The WLAN Handset 6120
and 6140 are designed to produce optimal voice quality.
However, when used in extremely loud noise
environments (for example, close to working heavy
machinery), users may experience degradation in call
quality performance due to echo. Avoid using the handset
when traversing these types of environments.
The areas with potentially explosive atmospheres referred to above include fueling
areas such as below decks on boats, fuel or chemical transfer or storage facilities,
areas where the air contains chemicals or particles such as grain, dust, or metal
powders, and any other area where you are normally advised to turn off your vehicle
13
Regulatory and safety information
engine. Areas with potentially explosive atmospheres are often but not always posted.
Batteries: All batteries can cause property damage and/or bodily injury, such as
burns, if a conductive material such as jewelry, keys, or beaded chains touch exposed
terminals. The conductive material can complete an electrical circuit (short circuit)
and become quite hot. Exercise care in handling any charged battery, particularly
when placing it inside a pocket, purse, or other container with metal objects.
Cleaning and drying considerations: Aleather carrying case can help to protect the
surfaces of the radio product and help prevent liquids (for example, rain) from
entering into its interior. This product is not waterproof and exposing it to liquids can
result in permanent damage.
Electromagnetic interference and compatibility
Attention: Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed, or otherwise configured for
electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your
radio product in any facility where posted notices instruct you to do so. Hospitals or
health care facilities can be using equipment that is sensitive to external RF energy.
Medical devices
Pacemakers: The Health Industry Manufacturers Association recommends that a
minimum separation of 6 inches (15 cm) is maintained between a handheld wireless
radio product and a pacemaker. These recommendations are consistent with the
independent research by, and recommendations of Wireless Technology Research.
WARNING
Persons with pacemakers should:
•
always keep the radio product more than 6 inches
(15 cm) from their pacemaker when the radio
product is turned on
•
•
not carry the radio product in a breast pocket
use the ear opposite the pacemaker to minimize
the potential for interference
•
turn the radio product off immediately if they
suspect the occurrence of interference.
Hearing aids: Some digital wireless radio products may interfere with some hearing
14
Regulatory and safety information
aids. In the event of such interference, consult your hearing aid manufacturer to
discuss alternatives.
US/Canada: Hearing Aid Compatibility (HAC) as per FCC Part 68
Other medical devices: If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately shielded from external RF
energy. Your physician may be able to assist you in obtaining this information.
Use while driving:
Check the laws and regulations on the use of radio products in the area where you
drive. Always obey them. When using the radio product while driving:
• Give full attention to driving and to the road.
• Use handsfree operation, if available.
• Pull off the road and park before making or answering a call, if driving
conditions so require.
Handset operation normal position: Hold the handset as you would any other tele-
phone, with the earpiece to your ear and speak into the microphone. The internal
antenna is then positioned properly.
Handset operation body-worn position: To maintain compliance with RF energy
exposure guidelines, if you wear a handset on your body when transmitting, always
use the handset with a Nortel-supplied accessory as described in the user guide for
this handset. Nortel supplies belt clips, holsters, and lanyards for body-worn opera-
tion. Use of accessories not supplied by Nortel may cause the handset emissions to
exceed RF energy exposure guidelines.
15
Regulatory and safety information
Specific Absorption Rate (SAR) information
Your WLAN Handsets 6120 and 6140 is a low-power radio transmitter and receiver.
When it is on, it receives and also sends radio frequency (RF) signals. In August
1996, the Federal Communications Commissions (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless telephones. Those guidelines are
consistent with the safety standards previously set by both U.S. and international
standards bodies:
• ANSI C95.1 (1992) American National Standards Institute
• NCRP—Report 86 (1986) National Council on Radiation Protection and
Measurements
• ICNIRP (1996) International Commission on Non-Ionizing Radiation
Protection;
• DHWC—Safety Code 6 Department of Health and Welfare Canada
These standards are developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons, regardless of
age and health. The exposure standard for wireless mobile phones employs a unit of
17
Regulatory and safety information
measurement known as the Specific Absorption Rate (SAR). The SAR limit set by
the FCC is 1.6W/kg. Tests for SAR are conducted by using standard operating
positions specified by the FCC with the telephone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the telephone while operating
can be well below the maximum value. This is because the telephone is designed to
operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless Base Station antenna, the lower
the power output. Before a telephone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body) as required by the FCC
for each model. While there may be differences between the SAR levels of various
telephones and at various positions, they all meet the government requirement for
safe exposure.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model telephone is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID IYG702X or FCC ID IYG703X.
Additional information on Specific Absorption Rates (SAR) can be found on the
Cellular Telecommunications Industry Association (CTIA) website at
http://www.ctia.org/.
The only authorized headsets that may be utilized with the Nortel WLAN Handset
6120 or 6140 are those obtainable from Nortel Networks or its reseller partners.
18
Regulatory and safety information
19
Regulatory and safety information
20
Your WLAN Handset 6120 and 6140
Your WLAN Handset 6120 and 6140
This section describes the WLAN Handset 6120 and 6140 and their features when
operating on Nortel Communication Server 1000. The WLAN Handset 6120 and
6140 are fully functional handsets specifically designed for the busy office
environment.
Note: Not all features described in this guide are available on all handsets. Consult
your system administrator to verify which features are available for your use.
WARNING
•
To minimize risk of interference, pacemaker users
should not carry the WLAN Handset 6120 and 6140
next to the pacemaker.
•
•
Avoid placing the handset near small metallic objects.
The handset earpiece attracts magnetic objects.
The WLAN Handset 6120 and 6140 produce noise
noticeable to hearing aid users. Use a headset
compatible with hearing aids.
•
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device cannot cause harmful interference and (2)
this device must accept any interference received,
including interference that can cause undesired
operation.
21
Your WLAN Handset 6120 and 6140
WLAN Handset 6120 and 6140
Handset controls and descriptions
Press and hold the End button to turn your
WLAN Handset 6120 and 6140 off.
This key also affects some of the states of the
handset.
Press the End button to terminate an active
call.
Press the Start button to place a call.
Press the Line button to access the key labels
for line appearances and line features.
Attention: Line emulates the six feature keys
on a i2004 deskset.
Attention: All features activated by Line are
locally programmed and may or may not be
available in any given facility
22
Your WLAN Handset 6120 and 6140
Press FCN to open the Features list when in
the active (idle) state. Other handset
functions are accessed via the Actv soft key.
Soft keys (self-labeled) are located below
the display area. The liquid crystal display
(LCD) indicator above the key changes,
based on the state of the handset. Use the
four Soft keys to activate the displayed soft
key feature.
Use the Nav buttons and Enter to navigate
and activate the various menu options.
23
Your WLAN Handset 6120 and 6140
Status indicators
Function
Indicator
These symbols give a visual indication (from weak to strong)
of the signal strength to the handset.
You have a new voicemail message.
The battery icon indicates the amount of charge that remains
in the battery pack. When only one level remains, the battery
pack must be recharged.
The speakerphone icon displays when the speakerphone is
active.
The Line Indicator area displays the line currently in use.
Any lines which are not idle or active (for example, if the line
is on hold or forwarded) have a plus sign (+) in front of the
entry for that line.
1
Up and down arrows are displayed when the menu has
additional options above or below. Left or right arrows are
displayed during editing when the cursor can be moved left
or right.
The telephone ring icon indicates a regular incoming
telephone call.
The messaging ring icon indicates an incoming call from a
Messaging application.
The push-to-talk (PTT) ring icon indicates an incoming PTT
call.
The priority PTT ring icon indicating an incoming call on the
priority PTT channel. This call overrides any other calls.
Muted
The muted indicator is displayed after the Mute soft key is
pressed. It indicates that the microphone is not transmitting
sound. Press the Mute soft key again to unmute the
microphone.
Locked
The locked indicator is displayed when the keypad is locked.
No Service
The no service indicator indicates that you are out of the
coverage area and cannot receive or place calls. The
out-of-service tone plays. Return to the coverage area to
reestablish the connection.
24
Your WLAN Handset 6120 and 6140
The download icon indicates that the handset is downloading
code. This icon only appears while the handset is running the
over-the-air downloader. It appears to the right of the signal
strength icon in the same location as the voicemail icon.
The ring indicator icon is used to display the Real-Time
Location System (RTLS) icon, indicating that the
administration option has been set to ON. An incoming call,
triggering the ring indicator icon, takes priority over the
RTLS icon.
Modes of operation
The WLAN Handset 6120 and 6140 have six modes of operation (see Table 1).
Table 1
The WLAN Handset 6120 and 6140 Modes of operation (Part 1 of 2)
Mode
Description
Standby
This is the normal state when the handsets are online but inactive.
In the standby state, the handset can receive calls and access the
User Option menu. To perform other operations, the handsets
must be active (off-hook). The standby state uses less power than
the active (idle) state.
Active
This is equivalent to a regular telephone being off-hook. The
handsets go to the active (off-hook) state when you press Start
when the handsets are in the standby or active (idle) state. When
in the active (off-hook) state, the handsets use a soft ring.
Active idle
The soft key display area is active but there is no dial tone. From
the standby mode, press the Actv soft key to enter the active idle
mode and display available soft keys.
Config Menu
Message Alert
User preferences are accessed in the Config Menu. In this mode
the handsets are on, but cannot receive calls.
Custom text messaging applications can be programmed for your
facility. This mode is activated through FCN+8, 9, # or * if
programmed..
25
Your WLAN Handset 6120 and 6140
Table 1
The WLAN Handset 6120 and 6140 Modes of operation (Part 2 of 2)
Mode
Description
Push-to-talk
(PTT)
This feature is only available in the WLAN Handset 6140. The
WLAN Handset 6140 uses channels for incoming and outgoing
radio communication.While PTT is active, the handset is in PTT
mode.
Menu navigation
The navigation keys (Nav keys) located below the soft keys are used to navigate
through menu options. These keys are referred to in this guide as Nav keys (NavS,
NavT, NavW, NavX) and Enter.
Figure 1
Menu navigation
Shortcut Keys
When a menu is displayed, a shortcut key can be displayed on the right edge of the
menu line. Press the corresponding number on the keypad to activate the
corresponding menu option.
Handset Displays
The top row of the display provides status indicators for various handset conditions. It
is referred to as the status bar.
The middle row displays information about the handset identity, user profile, calls in
progress, menu options, and data from the telephone.
The bottom row displays soft key labels.
26
Your WLAN Handset 6120 and 6140
Figure 2 Standby Mode Display
Figure 3
Feature mode display
Feature Activation displays
The handset enters Active Idle mode when Actv is pressed from standby mode,
displaying feature activation softkeys. These softkeys also display during an active
call.
When FCN is pressed during active idle mode or while in an active call, the softkey
labels shown below display additional features that can be activated for call handling.
Additionally, when FCN is pressed during active or active idle mode, a Feature List
displays that lists features that have been configured for your facility. The Exit
softkey or END returns to the previous display.
Features may also be programmed to the Line key. Press Line when in active mode to
view the list of features that have been programmed for your facility. Line features are
explained later in this text.
27
Your WLAN Handset 6120 and 6140
Soft key labels
The bottom row of the display shows labels that are associated with the four soft keys
just below it. When a soft key is active, a label appears to describe its function. If you
press the soft key, the feature is activated. When additional softkeys are available, the
More softkey displays. Press More to view additional soft key labels.
The following table shows some of the soft keys that are available.
Table 2
WLAN Handset 6120 and 6140 soft key labels
Soft key label
Description
Action
Back
Go Back
Returns to the previous menu display.
CAPS
caps
Change case
Toggles to allow a change in case when you
enter alphabetical text.
Clr
Clear
Deletes the entry.
Cncl
Cancel
Returns to the previous menu display without
saving any data that is entered.
Del
Delete
Deletes the character to the left of the cursor.
Done
Finished
Exits a list when more than one selection is
possible.
Exit
Hold
Cfg
Exit
Exits the menus.
Hold
Places a call on hold.
Configure
Mute
Opens the config menu.
Mute
No
Toggles to mute or unmute the microphone.
Press to reply No to a displayed question.
Negative
reply
Play
Prof
Redl
Spdc
Play
Plays the selected ring tone.
Profile
Redial
Opens the profile menu.
Displays a list of the last 10 numbers entered.
Opens the list of speed-dial numbers.
Speed-dial
call
28
Cleaning your handset
Table 2
WLAN Handset 6120 and 6140 soft key labels
Soft key label
Spkr
Description
Action
Speakerphone Toggles the speakerphone function.
Lock
Lock keys
Press Cfg + Enter, to lock the keypad.
Unlk
Unlock keys
Active USB
Press Cfg + Unlk to unlock a locked keypad.
USB
Displays when the handset is being configured
by the USB port of the dual charger.
Yes
Positive reply Press to reply Yes to a displayed question.
Cleaning your handset
The WLAN Handset 6120 and 6140 occasionally need to be cleaned to maintain
appearance. In general, wiping the handset surface with a plain-water-dampened cloth
or paper towel removes most films or residues.
If more rigorous cleaning is required, you can use:
• A mild detergent solution. Be sure to wipe away any detergent residue with a
plain-water-dampened cloth.
• Any general-purpose household glass and surface cleaner. A spray cleaner may
be used with care. Do not spray at an angle. Do not allow liquid cleaners to seep
into keypad. Be sure to wipe away any detergent residue with a clean
water-dampened cloth. Do not immerse. Spray the cleaner on a soft cloth or
paper towel and then wipe the handset.
• Pre-treated cloths, like those used for eyeglasses or cameras.
• Pre-moistened towelettes. Avoid those containing lanolin or aloe as it leaves a
slippery residue.
• Isopropyl alcohol, applied by a damp cloth or paper towel. When you use
alcohol, do not rub the keypad characters vigorously, as this significantly
29
Care of your handset
degrades legibility.
ATTENTION
Do not use furniture polishes, waxes, or plasticizer-based cleaner.
•
•
•
•
Do not use lanolin, aloe, glycerin, or other skin care products.
Do not apply any solvent such as acetone or mineral spirits.
Do not directly spray or immerse the handset.
If the headset connector is dirty, you can experience a scratchy or intermittent signal.
To clean the connector, dip the padded end of a cotton swab in isopropyl alcohol.
Gently insert in the connector and twist, repeating several times. If available, blow
compressed air into the connector to clear debris.
Care of your handset
To ensure proper care of your handset:
• Avoid dropping the handset or knocking it against hard surfaces. To protect the
handset, carry it in a holster or carrying case.
• Do not open the handset or disassemble the charger. Either of these actions will
void your warranty.
• Turn off the handset and unplug the charger before cleaning. Do not exert
undue pressure on the electrical contacts of the charger while cleaning.
• Keep the headset jack covered when not in use.
• Use a carrying case to help protect the surfaces and to help prevent liquids, for
example, rain from entering into the interior of the handset.
• If your handset gets wet, follow the procedure below:
1
2
3
4
Power off the handset.
Remove the battery pack from the handset.
Shake excess liquid from the handset.
Place the handset and battery pack in an upright position
in a dry, well ventilated area.
5
Allow the handset and battery pack to dry for 72 hours
before you reconnect the battery pack and power on the
handset.
If the handset still does not work, contact your phone system administrator for
assistance.
30
Basic handset operation
Basic handset operation
Attention: Press End to disconnect from a previous call.
Powering on and off the WLAN Handset 6120 and 6140
To power on/off the handset:
Press End to turn on. Press and hold End to
turn off.
Locking the keypad
Press Cfg + Enter to manually lock the
keypad.
Unlocking the keypad
Press Unlk + # to unlock the keypad.
Making an internal call
To make an internal call
1. Press Start and wait for a dial tone.
2. Enter the internal extension.
Making an external call
To make an external call
1. Press Start and wait for a dial tone.
2. Enter the external number.
31
Basic handset operation
Selecting a line
To select a line
If multiple lines are available, your telephone
system can require you to select a line before
you enter a number.
1. Press the Line button.
2. Press the number key that corresponds
to the desired line.You will hear a dial
tone.
Entering a number
To enter a number
1. While the handset is in standby mode,
press Start.
+
2. Listen for the dial tone.
3. Press the number pad to enter the
number.
Redialing a number
To redial a number
1. While the handset is in standby mode
press the Actv soft key.
2. Press the Redl soft key.
A list of recently-called numbers is
displayed.
3. Use the Nav keys to select the number
you wish to redial.
4. Press the Dial soft key.
Answering a call
The handset rings or vibrates to alert you of an incoming call. A line indicator on the
display shows the caller’s name and extension.
32
Basic handset operation
To answer a call
1. Press Start and hold the earpiece to your
ear.
2. Alternatively, activate the speakerphone
by selecting the spkr soft key.
Answering a call on a second line
If you are on a call and hear subdued ringing, a call is incoming on a second line. The
line number on the display is flashing.
1. Press FCN.
2. Place your first call on hold.
3. Press Line.
4. Scroll using the Nav keys to select the
line displaying the incoming call.
5. Press Enter to answer the call.
Muting the microphone
To mute the microphone
Press FCN + Mute.
Placing a call on hold
To place a call on hold
Press FCN + Hold.
Resuming a held call
To resume a held call
Press Line and then press the line number
key.
33
Basic handset operation
Hanging up
To hang up a call
Press End.
To return to the standby mode, do this action
at the end of each call.
Adjusting the speaker volume
To adjust the speaker volume
Press volume up/down on the side of the
handset during the call.
Changing the ring volume
To change the ring volume
Press volume up/down on the side of the
handset while the phone is ringing. The
default ring volumes are set in the User
Profile menus.
Silencing the ringing
To silence the ringing
Press End to silence the ring.
Opening the speed-dial list
To open the speed-dial call list
1. Press Actv.
2. While the handset is in standby mode,
press the Spdc soft key.
Activating the speakerphone
To activate the speakerphone
Press the Spkr soft key and speak into the
34
Basic handset operation
handset. Note that this feature may not be
activated at your facility.
Answering using the headset
To answer using the headset
Press any key (other than End) to answer a
call when the headset is plugged in.
Adjusting the headset volume
To adjust the headset volume
Press volume up/down on the side of the
handset during the call.
Changing the user profile
To change the user profile
1. While the handset is in standby mode,
select the Prof soft key.
2. To select a new profile, scroll up or
down using the Nav keys and press
Enter.
Opening the Personal Directory
To open the Personal Directory
1. While the handset is in the inactive state,
select FCN.
2. Using the navigation keys, navigate to
Directories and press Enter.
3. Continue to navigate to Personal
Directories and press Enter.
4. Navigate to the number you wish to call.
5. Press the Dial soft key.
35
Basic handset operation
Displaying additional features
To display additional features
During a call, press FCN to display
additional features that are customized for
your facility.
Turning on the backlight
To turn on the backlight
The backlight illuminates when any key is
pressed or when there is an incoming call,
and stays on for 10 seconds. If another key is
not pressed within 10 seconds, the backlight
automatically turns off.
36
Advanced features
Advanced features
Facility-specific features
Press FCN while off-hook to display the menu of advanced telephone features
available at your facility. Features can be activated by pressing the corresponding
shortcut key or by scrolling up and down using the Nav keys to highlight the option
and pressing Enter.
Speakerphone
Your system administrator can enable or disable the speakerphone mode. If the
speakerphone is enabled, it is activated by selecting the Spkr soft key. Select Spkr
again to end speakerphone mode. The audio transfers to the handset earpiece. When
speakerphone is disabled, Spkr does not appear as a soft key label.
Redial
Redl is available in the standby mode. When Redl is selected, a list of the last 10
outgoing calls are displayed. Scroll using the Nav keys to highlight the number and
then press Start to enter the number.
Personal Directory
The Personal Directory in your WLAN Handset 6120 and 6140 can store up to 20
user-defined numbers. Open the Personal Directory list by selecting FCN from the
inactive state and use the navigation keys. You can add, delete, or edit an entry in the
Personal Directory.
The Personal Directory list is sorted alphabetically. If the system speed-dial call key is
programmed, it is listed as the first entry with a greater-than (>) symbol as the first
character. Only the system administrator can change this entry. The <new> option
appears until the maximum number of entries is entered.
Real-Time Location System
The Real-Time Location System (RTLS) is a feature on the WLAN 6120 and 6140
Handsets enabling location tracking and monitoring of the device. Your system
administrator turns this function ON or OFF. When the RTLS is turned ON, this
information is displayed as an icon on a map of a selected area, such as an office
37
Advanced features
interior.
The Ring Indicator icon location on the handset displays the RTLS icon, and indicates
that the RTLS administration option has been set to ON. When a call comes in, the
ring indicator replaces the RTLS icon.
When you are in the Config Menu and a call comes in, the RTLS icon starts blinking
on the top of the screen. There are two ways to get the phone to ring from this point:
1.
Leave it alone and in 20 seconds the Config Menu will time out and
the phone will return to the idle screen and start ringing.
2.
Press END or the Exit softkey to exit the Config Menu (because you
noticed the flashing phone icon) and the phone will return to the idle
screen and will start ringing.
At this point, the phone can be answered by pressing the START (offhook) key. If
desired, you can answer the call immediately without pressing END/Exit or letting
the menus timeout.
Speed-dial call
You can use your WLAN Handset 6120 and 6140 to assign up to 10 speed-dial call
keys to numbers in the Personal Directory.
From standby mode, open the speed-dial call list by selecting the Spdc soft key. If
programmed, the first item on this list is the system-wide speed-dial call number set
by the system administrator. It is marked with a greater-than (>) symbol on the left
side of the row. It is usually reserved for emergency situations.
To place a speed-dial call, press and hold the corresponding key for one second. The
system speed-dial key must be pressed for three seconds. The handset displays the
name and number for one second before it dials the call. You can press End during
this second to terminate the call.
Alternatively, you can scroll using the Nav keys to highlight a number or listing and
press Start or Spkr to enter the number. Press Exit to return to standby mode.
A Personal Directory entry number can be assigned to a speed-dial key from the
speed-dial list. Select the speed-dial call key that you wish to assign and press Set to
open the Personal Directory list. Use the Search feature or scroll using the Nav keys
to select the desired entry.
38
Advanced features
Speed Dial Key 3
Choose a Number
>[System Name]
[Name]
[Name]
[Name]
Back
Press Enter to assign the selected name to that speed-dial call key. Press Back to
return to the speed-dial call list. You can edit speed-dial call entries through the
Personal Directory, as described above.
The Config Menu
When the handset is in standby mode, press the Cfg soft key to enter the Config
Menu. The handset cannot make or receive calls while in the Config Menu. You can
set your user preferences in the Config Menu.
Config Menu
3
General Settings
Lock Keys
User Profiles
Phone Settings
System Info
Prof
Pl
Exit
Scroll through the menu options using the Nav keys. When an asterisk (*) appears to
the left of an option, it indicates that the option is selected. Press Exit to return to
standby mode. Press Back to return to the previous menu.
39
Advanced features
Config Menu options
Lock Keys
User Profiles
Silent
Vibrate
Loud
Set as Active
Ring Settings
Noise Mode
Telephone
Soft
Message Alert 1
Message Alert 2
Custom
Ring in Headset
Ring in Speaker
Ring Cadence
Ring Tone
Warning Tones
Key Tones
Ring Volume
Vibrate Cadence
Ring Delay
Push-to-talk
continued on next page
40
Advanced features
User-profiles
Your handset ring behavior is established by five User Profiles:
• Silent
• Vibrate
• Loud
• Soft
• Custom
The currently-active user profile is shown on the standby display. While the handset is
in standby mode, you can change the ring behavior by pressing Prof and selecting a
new profile from the list. The currently-active profile is marked with an asterisk (*).
41
Advanced features
To change the ring-tone or any other ring setting for any profile, go to User Profiles
and select the profile, and then select Ring Settings and Telephone Ring for standard
phone calls or one of the Message Alerts for text message. Then, select the ring
option that you want to adjust.
Default profile settings
Setting/Profile
Silent
Vibrate
Soft
Loud
Custom
Ring Cadence
Off
Off
Telephone
Telephone
Telephone
Ring Tone
Ring Volume
Vibrate Cadence
Ring Delay
Tone 1
1
Tone 1
1
Tone 1
3
Tone 1
7
Tone 1
5
Off
Telephone
0
Off
Off
Telephone
5
0
0
0
Noise Mode
Normal
Speaker
Off
Normal
Speaker
Off
Normal
Speaker
On
Normal
Speaker
On
Normal
Speaker
On
Headset/Speaker
Key Tones
Warning Tones
Push-to-talk*
Off
Off
On
On
On
Off
Off
On
On
On
*Push-to-talk is available only on the WLAN Handset 6140 .
To reset all user profiles to the default settings, contact your system administrator.
Data entry and editing
Enter number by pressing the keypad buttons. The blinking underscore, identifies the
cursor position. To enter alphanumeric strings, CAPS/caps is displayed and can be
used to toggle the case. Enter letters by repeatedly pressing the corresponding key
until the desired letter is displayed on the screen. Use CAPS to change the case as
needed.
To edit during entry
1. Press Del to delete the character to the
left of the entry.
2. Press Clr to delete an entry.
3. Enter the new data.
To edit an existing entry
1. Scroll using the Nav keys to move the
cursor position.
42
Advanced features
2. Press Del to delete the character to the
left.
3. Insert new data by using the buttons on
the keypad.
Alphanumeric Entries
Table 3
Alphanumeric entries
Key
caps
CAPS
1
1
2
3
4
5
6
7
8
2abc
3def
4ghi
5jkl
2ABC
3DEF
4GHI
5JKL
6MNO
7PQRS
8TUV
6mno
7pqrs
8tuv
9wxyz
0
9
0
*
9WXYZ
0
* . - ! $ % & ’ ( ) + , : ; / \ = @ ~
#
# <space>
Push-to-talk
This feature is available only on the WLAN Handset 6140.
In PTT mode, the WLAN Handset 6140 can be used in a group broadcast mode in
which the handsets operate like walkie-talkies, and in which a single handset can
transmit to multiple listeners.
43
Advanced features
Push-to-talk (PTT) is enabled by the system administrator and set up by the user using
the Config Menu. See Config Menu options for details about setting up the PTT. If the
system administrator disables the PTT, the PTT options do not appear in the Config
Menu.
To initiate a PTT call
1. Press Push-to-talk.
Wait for the display to show
Transmitting.
2. Speak into the microphone.
All WLAN 6140 handsets that are
monitoring the channel can hear the
transmission.
To respond to a PTT call
Press Push-to-talk during the 10 second
wait period.
To select a different PTT channel
1. Press and release Push-to-talk.
2. Select a new channel from the list by
scrolling using Nav keys.
To end one PTT call and start
another call
1. Press End to exit the PTT call.
2. Press Push-to-talk and select a different
channel from the list.
3. Press Push-to-talk to begin to transmit
on the new channel.
To receive a PTT call while in a
telephone call
1. Press End to end the telephone call.
2. You hear the PTT call.
To subscribe to additional PTT
channels
1. Open the Config Menu and select
Push-to-talk (PTT).
2. Select Subscribed Channels.
3. Select the channel that you want to add.
Subscribed channels are marked with an
asterisk (*).
To transmit on the priority channel
1. Press Push-to-talk.
2. Select the priority channel from the list.
44
Advanced features
3. Press Push-to-talk and then speak.
To end a PTT call
Press End to exit the PTT call.
To change PTT volume
Use the Up and Down volume buttons
located on the side of the handset.
To answer a call during a PTT
transmission
Press Start. The PTT transmission is
preempted by the telephone call.
To start a telephone call during a
PTT transmission
1. Press Start.
2. Enter the number that you wish to call.
The PTT transmission is preempted
during the telephone call.
To turn off PTT
Change to a different profile. Silent and
Vibrate disable PTT by default, or
unsubscribe from all PTT channels.
45
The headset
The headset
Nortel offers optional headsets (depending on market region) for use in noisy
environments or if you need to have your hands free while talking.
To use the headset, plug it into the jack on the bottom of the handset. The headset is
specifically designed for the WLAN Handset 6120 and 6140.
When you receive a call using a headset, the headset and the handset ring.
Use only authorized headsets with WLAN Handset 6120 and 6140.
47
The headset
48
Handset display
Handset display
This section summarizes the display features of the WLAN Handset 6120 and 6140.
Figure 4
WLAN Handset 6120 and 6140 display
Locked
Ext. 555
John Doe
07-05 12:19p
Profile: Loud
1: General
Spkr Phbk Redl Spdl
The WLAN Handset 6120 and 6140 have three display areas:
• The top row of the display provides status indicators for various
handset conditions. It is referred to as the status bar.
• The middle section displays information about the handset identity,
user profile, calls in progress, menu options, and data from
telephone.
• The lower display area shows the soft key labels.
User Option menu
When the WLAN Handset 6120 and 6140 are in standby mode (power is on, but the
handset is not in use), press the Cfg button to display the User Option menu.
This section describes the following standard User Option menu items:
• Lock Keys
• Language
• Ring Options
• Phone Options
• System Info
• Extension
Check with your system administrator for the specific features that are supported by
your WLAN Handset 6120 and 6140.
49
Handset display
Locking the Keypad
You can lock the handset by using the Lock Key menu.
To lock the keypad
1. While the handset is in the standby
mode, press the Cfg soft key.
2. Use the Nav keys to scroll through the
feature menu and highlight the
Lock Keys feature.
3. Press Enter to lock the keypad.
To unlock the keypad
1. While the handset is in standby mode,
press the Unlk soft key.
2. Press # to unlock the keypad.
Selecting a Language
For systems that support multiple languages, you can select the display language from
a list of supported languages.
To change the language
1. While the handset is in standby mode,
select the Cfg soft key.
2. Use the Nav buttons to scroll through
the menu and highlight Languages.
3. Press Enter.
4. Use the Nav buttons to scroll through
the menu and highlight the desired
language.
5. Press Enter.
6. Do one of the following:
•
Press back to return to the previous
menu and choose another option.
50
Handset display
•
Press the End button to exit all
menus and return to the standby
state.
Selecting Ring Options
Phone Options presents a menu of choices:
• Telephone Ring — presents a submenu of choices that you can set:
• Ring Cadence
• Ring Tone (see the following note 1)
• Ring Volume
• Vibrate Cadence
• Ring Delay (see the following note 2)
• Message Alert 1 — reserved for future use.
• Message Alert 2 — reserved for future use.
Note 1: Ring Tone does not appear in the menu when Ring Cadence is off.
Note 2: Ring Delay does not appear in the menu when Ring Cadence or
Vibrate Cadence is off.
To select Ring Cadence
1. While the handset is in standby mode,
select the Cfg soft key.
2. Use the Nav keys to scroll to User
Profiles.
3. Press Enter to select User Profiles.
The next menu level is displayed.
4. Use the Nav keys to scroll through the
menu and highlight one of the settings.
(an asterisk [*] indicates the
selected/active setting).
5. Press Enter to select the option.
6. Use the Nav keys to scroll to Ring
Settings.
7. Press Enter to select the option.
51
Handset display
8. Use the Nav keys to select Telephone
Ring.
9. Press Enter to select the option.
10. Use the Nav keys to scroll to Ring
Cadence and select one of the
following:
•
•
•
•
•
Off
PBX — This is the default.
Continuous
Short Pulse
Long Pulse
11. Press Enter to choose the cadence.
12. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
To select Ring Tone
Ring Tone does not appear in the menu when
Ring Cadence is off.
1. While the handset is in the standby
mode, press the Cfg soft key.
2. Use the Nav keys to scroll to User
Profiles.
3. Press Enter to select User Profiles. The
next menu level is displayed.
4. Use the Nav keys to scroll through the
menu and highlight one of the settings
(an asterisk [*] indicates the
selected/active setting).
52
Handset display
5. Press Enter to select the option.
6. Use the Nav keys to scroll to Ring
Tone.
7. Press Enter to select the option.
8. Use the Nav keys to select Telephone
Ring.
9. Press Enter to select the option.
10. Use the Nav keys to scroll through the
menu and select Ring Tone.
11. Press Enter to select the option.
12. Use the Nav keys to scroll through the
list and to highlight one of the
following:
•
•
•
•
•
Tone 1 — This is the default
Tone 2
Tone 3
Tone 4
Tone 5
13. To play the highlighted setting, press
Play.
14. Press Enter to choose the tone.
15. Do one of the following:
•
•
Press Back to return to the previous
menu and choose another option.
Press the End button to exit all
menus and return to the standby
state.
53
Handset display
To select Ring Volume
1. While the handset is in the standby
mode, press the Cfg soft key.
2. Use the Nav keys to scroll to User
Profiles.
3. Press Enter to select User Profiles. The
next menu level is displayed.
4. Use the Nav keys to scroll through the
menu and highlight one of the settings.
(an asterisk [*] indicates the
selected/active setting).
5. Press Enter to select the option.
6. Use the Nav keys to scroll to
Ring Setting.
7. Press Enter to select the option.
8. Use the Nav keys to select Ring
Volume.
9. Press Enter to select the option.
10. Do one of the following:
•
Press the Back to return to the
previous menu and choose another
option.
•
Press the End button to exit all
menus and return to the standby
state.
To select Vibrate Cadence
1. While the handset is in standby mode,
press the Cfg soft key.
2. Use the Nav keys to scroll to Use
Profiles.
3. Press Enter to select the Use Profiles.
The next menu level is displayed.
54
Handset display
4. Use the Nav keys to scroll through the
menu and highlight one of the settings
(an asterisk [*] indicates the
selected/active setting).
5. Press Enter to select the option.
6. Use the Nav keys to scroll to
Vibrate Cadence.
7. Press Enter to select the option.
8. Use the Nav keys to highlight one of the
following:
•
•
•
•
•
Off — This is the default.
PBX
Continuous
Short Pulse
Long Pulse
9. Press Enter to choose the cadence.
10. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
To select Ring Delay
Ring Delay does not appear in the menu
when Ring Cadence or Vibrate Cadence is
turned off.
1. While the handset is in standby mode,
press the Cfg soft key.
2. Use the Nav keys to scroll to User
Profiles.
55
Handset display
3. Press Enter to select User Profiles. The
next menu level is displayed.
4. Use the Nav keys to scroll through the
menu and highlight one of the settings
(an asterisk [*] indicates the
selected/active setting).
5. Press Enter to select the option.
6. Use the Nav keys to scroll to
Ring Delay.
7. Press Enter to select the option.
8. Use the Nav keys to highlight one of the
following:
•
•
•
No Delay — This is the default.
5 Second Delay
10 Second Delay
9. Press Enter to choose the delay.
10. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
Selecting Phone Options
Phone Options presents a menu of choices:
• Noise Mode — enables the user to adjust the handset for different levels of
noise within the work environment. Changing the Noise Mode to High or
Severe adjusts the handset’s microphone and in-ear speaker volume to account
for background noise. Select Normal: for most office environments; High: for
moderate background noise; or Severe: for extremely noisy conditions. If you
use High or Severe modes in a quiet environment, your caller may find it
56
Handset display
difficult to hear your voice.
• Key Tones — controls whether pressing a key plays a tone.
• Warning Tones — controls whether warning tones are played when
out-of-range or during power up and power down.
• Display Contrast — controls the amount of contrast for the display.
• Keypad Autolock — controls automatic locking of the keypad when the
handset is in standby mode.
To select Noise Mode
1. While the handset is in standby mode,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Phone Options.
3. Press Enter to select the option. The
next menu level is displayed.
4. Use the nav keys to scroll through the
menu and select Noise Mode.
5. Press Enter to select the option.
6. Use the Nav keys to scroll through the
menu and highlight one of the following
settings (an asterisk [*] indicates the
selected setting):
•
Normal: For most office
environments. This is the default
setting.
•
•
High: For moderate background
noise.
Severe: For extremely noisy
conditions.
7. Press Enter to select the level.
8. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
57
Handset display
•
Press the End button to exit all
menus and return to the standby
state.
.
To change the key tones
1. While the handset is in standby mode,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
list of menu items and highlight User
Profiles.
3. Press Enter to select the setting.
4. Use the Nav keys to scroll through the
menu and highlight one of the following
settings (an asterisk [*] indicates the
selected setting):
•
•
Enable Tones — This is the default.
Disable Tones
5. Press Enter to choose this setting.
6. Navigate to enable/disable key tones.
7. Press Enter to toggle between
Enable/Disable.
8. Do one of the following:
Press Back to return to the previous
menu and choose another option.
Press the End button to exit all menus
and return to the standby state.
To change the warning tones
1. While the handset is in standby mode,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Phone Options.
58
Handset display
3. Press Enter to select the setting.
4. Use the Nav keys to scroll through the
menu and highlight Warning Tones.
5. Press Enter to select the setting.
6. Use the Nav keys to scroll through the
menu and highlight one of the following
settings (an asterisk [*] indicates the
selected setting):
•
•
Enable Warnings — This is the
default.
Disable Warnings
7. Press Enter.
8. Do one of the following:
•
•
Press Back to return to the previous
menu and choose another option.
Press the End button to exit all
menus and return to the standby
state.
To change the display contrast
1. While the handset is in the standby state,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Phone Settings.
3. Press Enter to select the menu item.
4. Use the Nav keys to scroll through the
menu and highlight Display Contrast.
5. Press Enter to select the setting.
6. Use the Nav keys to adjust the contrast
to a suitable level.
7. Press Enter to save the setting.
59
Handset display
8. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
To change the keypad autolock
1. While the handset is in the standby
mode, press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Phone Settings.
3. Press Enter to select the setting.
4. Use the Nav keys to scroll through the
menu and highlight Keypad Autolock.
5. Press Enter to select the setting.
6. Use the Nav keys to scroll through the
menu and highlight one of the following
settings (an asterisk [*] indicates the
selected setting):
•
•
•
•
Disable — this is the default.
5 seconds
10 seconds
20 seconds
7. Press Enter.
8. Do one of the following:
•
•
Press Back to return to the previous
menu and choose another option.
Press the End button to exit all
menus and return to the standby
state.
60
Handset display
Viewing system information
The System Information option displays the following:
• Phone IP Address — displays the Internet Protocol (IP) address assigned to the
handset.
• Server IP Address — displays the Server IP address.
• Firmware Version — displays the software version running on the handset.
Note: The information in the System Information option is for display purposes only.
You cannot edit this information.
To view the handset IP address
1. While the handset is in the standby state,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight
System Information.
3. Press Enter to select the setting.
4. Use the Nav keys to scroll through the
menu and highlight Phone IP Address.
5. Press Enter to view the IP address.
6. Do one of the following:
•
•
Press Back to return to the previous
menu and choose another option.
Press the End button to exit all
menus and return to the standby
state.
To view the Server information
1. While the handset is in the standby state,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight System
Information.
3. Press Enter to select the setting.
61
Handset display
4. Use the Nav keys to scroll through the
menu and highlight Server IP Address.
5. Press Enter to view the Server IP
address.
6. Do one of the following:
•
•
Press Back to return to the previous
menu and choose another option.
Press the End button to exit all
menus and return to the standby
state.
To view the Firmware information
1. While the handset is in the standby state,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight System Info.
3. Press Enter to select the setting.
4. Use the Nav keys to scroll through the
menu and highlight FirmwareVersion.
5. Press Enter to view the hardware
identification number (MAC address),
downloader version, function file
version, and phint1 file version.
6. Do one of the following:
•
•
Press Back to return to the previous
menu and choose another option.
Press the End button to exit all
menus and return to the standby
state.
Entering Extension number
The Extension option enables the user to view the extension number for the handset.
62
Handset display
This number is used to identify the handset. It is displayed when the handset is in the
standby state.
The Extension option is for display purposes. You cannot edit this option.
To view the Extension
1. While the handset is in standby state,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Extension.
3. Press Enter to select the option.
4. Do one of the following:
•
Press Exit to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
Setting up Push-to-talk
Note: The Push-to-talk feature is only available on the WLAN 6140 Handset.
Push-to-talk (PTT) mode enables two-way radio communication with another handset
user. You can configure PTT by using the following:
• Channel — selects the channel to be used.
• Enable/Disable — enable or disable Push-to-talk.
• Audio Volume — set the audio volume when using Push-to-talk.
• Tone Volume — set the volume of the tone played for Push-to-talk.
To set up a Push-to-talk channel
1. While the handset is in the standby state,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Push-to-talk.
3. Press Enter to select the option. The
next menu level is displayed.
63
Handset display
4. Use the Nav keys to scroll through the
menu and highlight Subscribed
Channel.
5. Press Enter to select the option.
6. Select a channel (one to eight).
7. Do one of the following:
•
Press Done to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
To enable or disable Push-to-talk
1. While the handset is in the standby state,
press the Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight User Profiles.
3. Select the profile option. The next menu
level is displayed.
4. Use the Nav keys to scroll through the
menu and select Enable/Disable
Push-to-talk.
5. Use the Nav keys to scroll through the
menu and highlight one of the following
settings (an asterisk indicates the
selected setting):
•
•
PTT Enabled
PTT Disabled — default.
6. Press Enter to toggle between
Enable/Disable.
7. Press Enter to select the setting.
64
Handset display
8. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
To change the Push-to-talk audio
volume
1. While the handset is in the standby state,
press Cfg soft key.
2. Use the Nav keys to scroll through the
menu and select Push-to-talk.
3. Press Enter to select the profile option.
The next menu level is displayed.
4. Use the Nav keys to scroll through the
menu and highlight Push-to-talk
Audio Volume.
5. Press Enter to select the option.
6. Use the Nav keys to adjust the volume
up or down.
7. Press Enter to select the setting.
8. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
To change the Push-to-talk tone
volume
1. While the handset is in the standby state,
press Cfg.
65
Handset display
2. Use the Nav keys to scroll through the
menu and highlight Push-to-talk.
3. Press Enter to select the next menu
level.
4. Use the Nav keys to scroll through the
menu and highlight Tone Volume.
5. Press Enter to select the option.
6. Use the Nav keys to adjust the volume.
7. Press Enter to select the setting.
8. Do one of the following:
•
Press Back to return to the previous
menu and choose another option.
•
Press the End button to exit all
menus and return to the standby
state.
66
Call features
Call features
System administration is required for Call features. Contact your system
administrator to ensure that these features are supported by the system software and to
configure them on your handset.
ATTENTION!
Access to the features and functions in the following sections are
dependent on your system configuration. Contact your system
administrator to determine whether specific features are accessible
through your WLAN Handset 6120 and 6140.
67
Call features
68
Making calls
Making calls
This section describes the features associated with making a call.
Use Autodial
The Autodial feature displays, stores, and automatically enters telephone numbers.
To use Autodial:
1. While the handset is in standby mode,
press the Start button.
2. To access the Feature Keys press the
Line button.
3. To enter the number press a number
(one through six) that corresponds with
the DN.
To display Autodial number:
1. While the handset is in standby mode,
press the End button.
2. Press the Line button to view the first
page of Autodial numbers.
3. Press the Line button again to view the
next page of Autodial numbers.
To store an Autodial number:
1. Press the Line button to access the
Feature Keys menu.
2. Press a number (one through six) that
corresponds to the desired location to
store the number.
3. Enter the telephone number (including
the access code) that you want to store
on the selected AutoDial key.
4. Press the Line button again to access the
Feature Keys menu.
5. Press the number key (one through six)
that corresponds to the desired location
selected in step 4 to store the number.
69
Making calls
The selected line number flashes in the
upper display area.
Activate Ring Again
Use the Ring Again (RingA) feature if a busy tone sounds or when there is no answer
after placing a call. RingA causes the ring again indicator to flash, indicating that the
person you tried to call is available. RingA automatically reenters the number. The
RingA feature is available only when the handset is in the active state and you have
selected the More softkey.
To use Ring Again (RingA):
1. Press the End button.
2. Enter a number.
3. If you hear a busy tone or there is no
answer, press the RingA soft key.
To call a RingA party when you
receive notification:
1. After you receive the visual notification,
press End.
2. Press the RingA soft key to
automatically call the number.
To quit RingA before notification:
Before you see the visual notification,
press the RingA soft key a second time.
Redial last number called
The Last Number Redial (Redl) feature automatically redials the last dialed number.
To use Last Number Redial (Redl):
1. Press the End button.
2. Press the Actv soft key.
3. Press the Redl soft key.
4. Scroll using the Nav keys to select the
number that you wish to re-dial.
70
Making calls
5. Press the Dial soft key.
Use Speed Call
By entering a two-digit code (01–99), use the Speed Call(Spdc) feature to store, edit,
and automatically enter frequently-called telephone numbers.
To store a Speed Call (Spdc) number:
1. Press the End button.
2. Press the Actv soft key.
3. Press the Spdc soft key (one through
six) corresponding to the
Speed Call Controller feature.
The triangular icon flashes indicating
programming mode.
4. At the prompt, enter a two-digit code
(01-99) and the telephone number. This
number can be internal, external, or long
distance.
5. Enter the access code, if required.
71
Making calls
6. Press a number key (one through six)
that corresponds to the
Speed Call Controller feature again to
save the code and number.
The flashing icon turns off.
To make a Speed Call:
1. Press the End button.
2. Select the Actv soft key.
3. Select the speed-dial number that you
wish to call.
Make a System Speed Call
Use the System Speed Call feature to enter Speed Call codes that override all
restrictions on a call.
To make a System Speed Call:
1. Press the Start button.
2. Press the Spdc soft key.
3. Select the system speed call number that
you wish to call.
72
Making calls
Use Conference Hotline
Use the Conference Hotline feature to automatically enter a specific number. You can
program other features such as Call Redirection to the Conference Hotline. Call
Redirection redirects a Conference Hotline call so that it is answered only by one
person.
To use Conference Hotline:
1. Press Start.
2. To access the Feature Keys menu, press
the Line button.
3. Press the number key (one through six)
that correspond to the
Conference Hotline feature to
automatically enter the number.
73
Making calls
74
While on an active call
While on an active call
This section describes the features that are available during an active call.
Place a call on hold
Use the Hold feature when talking on one line and another call arrives on a second
line. Retain the original call by placing it on hold and then answer the second call.
To place a call on hold:
To activate the Hold function, press
FCN and select the Hold soft key. The
number that corresponds to the line on
hold flashes in the upper display area.
If Automatic Hold is enabled, the
active call is automatically placed on
hold when you answer the second call.
To retrieve a call on hold:
1. Press the Line button plus the line
number of the call that you wish to
retrieve to access the Feature Keys
menu in the active (off-hook) state.
2. Press Enter.
Transfer a call
Use the Transfer feature to redirect a call to the appropriate person.
To use the Transfer feature to direct
a call to a third party:
1. Select the Transfer soft key.
2. Enter the DN to which the call is being
transferred.
3. When the number rings or a person
answers, press the Transfer soft key
again to talk.
75
While on an active call
Use Attendant Recall
Use the Attendant Recall feature to contact an attendant during a call and to connect
the call to the attendant.
To contact the attendant while on a
call:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Attendant Recall feature. Stay on
the line until the attendant answers.
3. Press the End button. The caller
remains connected to the attendant.
76
While on an active call
Use Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call from any
telephone or handset. Using Call Park does not tie up a line and, when configured
network-wide, you can use it across networks. You can configure a System Park
Extension to automatically park most calls.
To park a call on the System Park DN
or your own DN:
During an active call, select the Park soft
key.
By default, the call is parked on your DN
unless a System Park is enabled to
automatically park calls on the system.
To park a call on a DN other than the
System Park DN or your own DN:
1. Select the Park soft key.
2. Enter the DN where you want to park
the call.
3. Select the Park soft key again.
Record a Calling Party Number
Use the Calling Party Number feature to record a caller’s number or to charge a call to
an account number for accounting purposes during an established call.
To record a caller’s number for
accounting purposes:
1. Press the Call Party soft key to place
the caller on hold. The entered number
displays.
77
While on an active call
2. Enter a charge account number or the
caller’s number.
3. Press the Call Party soft key to return to
the call.
Display incoming calls
Use the Display feature to display a second incoming caller’s number and name
(if available) during an active call, without interfering with the call in progress.
To view the information on an
incoming call while on a call in
progress:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number that corresponds to the
Display feature to activate the feature.
3. Press the Line button to access the
Feature Keys menu.
4. Press the number key that corresponds
to the flashing line. The call waiting
information displays.
Trace a malicious call
Use the Malicious Call Trace feature to trace nuisance calls within your system.
To use Call Trace while on a call:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Call Trace feature.
78
Incoming calls
Incoming calls
This section describes the features that are available to you when a call is incoming.
Activate Call Pickup
Use the Call Pickup feature to pick up calls from any telephone or handset in the same
pickup group or in another pickup group.
To answer a call in your own
Call Pickup group:
1. Press the Start button.
2. Press Pickup.
To answer an incoming call in
another Call Pickup group:
1. Press the Start button.
2. Press the Line button to access the
Feature Keys menu.
3. Press the number key that corresponds
to the Group Pickup feature.
4. Enter the pickup group number of the
ringing handset.
To answer a call at a specific
extension in any pickup group:
1. Press the End button.
2. Press the Line button to access the
Feature Keys menu.
3. Press the number key that corresponds
to the Pickup feature.
79
Incoming calls
4. Enter the DN of the handset that is
ringing (in your call pickup group).
If the pickup DN or group number is
invalid, press the End button.
Use Call Waiting
The Call Waiting feature alerts you to an incoming call by producing a tone. It also
puts the current call on hold while you answer the new call.
To answer an incoming call while on
another call:
1. When the incoming call tone sounds,
press FCN to place the current call on
hold.
If Automatic Hold is enabled, it is not
necessary to put the current call on hold.
Begin with step two.
2. Press the Line button to access the
Feature Keys menu.
3. Press the number key that corresponds
to the Call Waiting feature.
To return to the first telephone call:
1. Choose one of the following:
•
•
Select FCN to place the second call
on hold.
or
Press the End button to end the
second call and then press the Start
button to enter the active (idle) state.
80
Incoming calls
2. Press the Line button to access the
Feature Keys menu.
3. Press the number key that corresponds
to the first call.
The first call that is on hold flashes so
the number indicator for that line
flashes.
81
Incoming calls
82
While away from your desk
While away from your desk
This section describes features that are used when you are away from your desk.
Use Call Forward
Use the Call Forward feature to direct incoming calls to ring at another Line (DN).
Note: If the handset is in the process of ringing, that call cannot be forwarded.
To forward your calls or change the
forward number:
1. Press the End button.
2. Place the handset in the active (idle)
state by pressing the Actv soft key.
3. Press Fwrd.
4. Enter the DN where you want to
forward your calls.
5. Press Fwrd a second time.
6. Press the End button to turn off the
handset.
To quit Call Forward:
Press Fwrd.
To reinstate Call Forward to the
same number:
Press Fwrd twice.
83
While away from your desk
Use Internal Call Forward
Use Internal Call Forward to accept only calls that originate at internal DNs to ring at
another DN. Calls that originate outside your telephone system still ring at your
handset. Current incoming calls cannot be forwarded.
To forward internal calls:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that correspond to
the Internal Call Forward feature.
3. Enter the DN to which your internal
calls are to be forwarded.
4. Press the Line button to access the
Feature Keys menu.
5. Press the number key that corresponds
to the Internal Call Forward feature.
To quit Internal Call Forward:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Internal Call Forward feature.
To reinstate Call Forward to the
same number:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Internal Call Forward feature
twice.
84
Talk with more than one person
Talk with more than one person
This section describes the features that you can use to hold conversations among more
than two people.
Use Call Join
Use the Call Join feature to connect calls to the current active call. This feature
creates a conference between two callers and yourself.
To connect a call on hold (on a
different line) to your current call:
1. Press the Conference soft key.
2. Press the Line button to access the
Feature Keys menu.
3. Press the number key that corresponds
to the number of the caller that you want
to connect to your current call.
4. Press the Conference soft key a second
time to add the person on hold to your
conversation.
Set up a conference call
Use the Conference feature to set up a conference call for three people (or six people,
depending on your handset configuration), including yourself.
To set up a conference call:
1. While on a call, press the Conference
soft key and place the party on hold.
You hear a dial tone.
2. Enter the number of the person you want
to add to the conference call. Before you
add this person to the call, you can talk
privately to them.
3. Press the Conference soft key a second
time to add all the parties to the call.
85
Talk with more than one person
4. If necessary, repeat the procedure until
all the required people are in the
conference.
If the person you attempt to add to
the conference is unavailable:
1. Press the End button.
2. Press the Line button to access the
Feature Keys menu.
3. Press the number key that corresponds
to the flashing icon to return to your
original call.
Use Conferee Selectable Display
Use the Conferee Selectable Display feature to list active conferees and to disconnect
a conferee from the conference call.
To view active conferees:
1. Press the End button.
2. While on a conference call, press the
Line button to access the Feature Keys
menu.
3. Press the number key that corresponds
to the Conferee Selectable Display
feature to turn on the liquid crystal
display (LCD) indicator. Each key press
changes the screen to show a different
active conferee.
This action has no effect on the display
of other telephones that are involved in
the conference.
86
Talk with more than one person
4. Press the End button. If configured, the
Conference Count Display returns an
updated total count of conferees. The
LCD indicator turns off.
To disconnect a conferee:
1. While on a conference call, press the
Line button to access the Feature Keys
menu.
2. Press the number key that corresponds
to the Conferee Selectable Display
feature until the conferee that you want
to disconnect appears on the screen.
3. Press the number key that corresponds
to the line on which the conference call
is established.
4. Choose one of the following:
•
For a single conferee, press the End
button. If configured, the
Conference Count Display returns
an updated total count of conferees.
The LCD indicator turns off.
•
For multiple conferees, repeat steps
one, two and three until all the
conferees are disconnected.
5. Press the End button.
Use Group Call
Use the Group Call feature to automatically call members of a predefined group, one
at a time, until they all answer.
To call group members:
1. Press the End button.
2. Press the Line button to access the
Feature Keys menu.
3. Press the number key that corresponds
87
Talk with more than one person
to the Group Call feature.
The feature automatically calls all group
members. The icon flashes until all
members answer.
The line numbers of the group members
appear on the display as they answer.
When the last participant answers, the
Group Call indicator lights steadily.
When a party in your group is on a
conference call or another group call,
they are not connected to your group
call.
After everyone in the group answers,
only the party who made the group call
can put the call on hold.
To answer a group call:
Press the End button.
About Notification tones:
•
•
•
If you are on a call and receive three
10-second tones, this is the notification
of a group call on your current exten-
sion.
If you are on a call on another line on
your handset when a group call is made,
you receive a long tone through the
handset or speaker.
You do not receive a notification of a
group call if you are already on a confer-
ence call or another group call.
88
Talk with more than one person
To end a group call:
Press the End button..
When the party who made the group call
disconnects, the call terminates for all
members of the group. However, the other
members of the group call can disconnect
from the call and not affect the members still
on the call.
89
Talk with more than one person
90
Work without interruption
Work without interruption
This section describes the features that provide uninterrupted work time.
Activate Make Set Busy
Use the Make Set Busy feature to make your handset appear busy to all callers.
To activate Make Set Busy:
1. With the handset in standby mode, press
the Line button to access the Feature
Keys menu.
2. Scroll using the Nav keys and highlight
the Make Set Busy feature.
3. Select Enter.
To deactivate Make Set Busy:
1. With the handset in standby mode, press
the Line button to access the Feature
Keys menu.
2. Scroll using the Nav keys and highlight
the Make Set Busy feature a second
time.
3. Select Enter.
91
Work without interruption
92
Other call features
Other call features
This section describes some of the call features available on your WLAN Handsets
6120 and 6140.
Use Call Page Connect to make an announcement
Use the Call Page Connect feature to make an announcement over a paging system.
Note: A Page key on an attendant console overrides and disconnects the telephones.
The telephones must reaccess the Page trunk.
To connect to Call Page:
1. While the handset is in standby mode,
enter the Page Trunk Access Code to
complete the connection to the page
system.
2. Make your announcement.
To disconnect Call Page:
3. Press the End button.
Use Centrex/Exchange Switchhook Flash
Use the Centrex/Exchange Switchhook Flash feature during an established call to use
a Centrex service, such as Call Transfer or Three-Way Calling.
To use Centrex/Exchange Line
Switchhook Flash:
1. While in a call, press the Line button to
access the Feature Keys menu.
2. Press the number that corresponds to the
Centrex Switchhook Flash feature.
A special dial tone sounds.
3. Enter the codes for your custom
Centrex feature.
4. Press the End button.
93
Other call features
Charge a call or charge a forced call
Use the Call Charge feature to charge a call to a specific account. The Forced Charge
feature charges long-distance calls from a handset that is restricted to local calls.
To charge a local or long-distance call
to an account before you dial:
1. Select More.
2. Select the Charge soft key.
3. Enter the charge account number.
4. Press the Charge soft key again.
5. At the tone, dial the number.
To charge a call in progress:
1. Select the Transfer soft key or the
Conference soft key. The call is placed
on hold.
2. Press the Charge soft key.
3. Enter the charge account number.
4. Press the Line button to access the
Feature Keys menu.
5. Press the number key that corresponds
to the line of the call to return to the call.
94
Other call features
To charge a call to an account when
you transfer a call:
1. To place the call on hold, select the
More soft key.
2. Press the Charge soft key.
3. Enter the charge account number.
4. After you hear the dial tone, enter the
number to which the call is to be
transferred.
5. Press the Transfer soft key when you
hear the handset ring.
You can talk privately to the person at
the transfer number before you press the
Transfer soft key.
To charge a call to an account when
you add someone to a conference call:
1. Select the More soft key. The call is
placed on hold.
2. Select the Charge soft key.
3. Enter the charge account number.
4. Enter the number of the person that you
want to add to the conference.
5. Select the Conference soft key.
Use Enhanced Override
Use the Enhanced Override feature to override an active call after you attempt to use
a Forced Camp-on. Use Enhanced Override to make a simple call or a consultation
call (such as placing a call on hold and calling another party).
To use Enhanced Override:
1. If you receive a busy signal after
entering a number, press the Line button
to access the Feature Keys menu.
2. Press the number key that corresponds
95
Other call features
to the Override feature to initiate a
Forced Camp-on.
If either party on the call disconnects at
this time, you hear an overflow (fast
busy/engaged) signal.
3. Press the number key that corresponds
to the Override feature again.
The two parties remaining on the call
hear an override tone, and a conference
call is established between all three
participants. If a participant disconnects,
the other two remain connected.
To end the connection:
Press the End button.
Use Forced Camp-on
Use the Forced Camp-on feature to automatically ring another handset (internal or
external) immediately after that handset disconnects from its current call. Using
Forced Camp-on in conjunction with Priority Override is referred to as Enhanced
Override.
To use Forced Camp-on:
1. If you receive a busy signal after
entering a number, press the Line button
to access the Feature Keys menu.
96
Other call features
2. Press the number key that corresponds
to the Override feature to initiate a
Forced Camp-on.
The party that you called receives a
tone, and you receive a ring/ringback
signal or busy/engaged signal,
depending on the options chosen. You
are now camped-on to the number you
entered.
3. When the party that you called finishes
their call, your handset automatically
enters the number. Both your handset
and their handset rings.
To answer a call camped on to your
extension:
When the handset rings, press the Start
button.
You can program your handset for either
Camp-on or Call Waiting, but not both.
Use Privacy Release
Use the Privacy Release feature to enable one or more people who share your DN to
join a call.
To use Privacy Release:
1. Press the Line button.
2. Press the Privacy Release soft key
during a call. A party joins the call by
pressing the shared number (DN) key on
their handset (Multiple Appearance DN
feature).
97
Other call features
98
Branch Office
Branch Office
This section describes the Branch Office handset which can operate in Normal Mode
or Local Mode.
Normal Mode
In Normal Mode, the handset registers with the Main Office and receives services
from the Main Office. At any time during Normal Mode, you can check local mode
functionality (make and receive calls) by enabling Local Mode and then return to
Normal Mode.
Local Mode
If the WAN connection goes down, the handset loses communication with the Main
Office TPS. The handset then registers with the Branch Office and receives services
from the Branch Office. When in Local Mode, Local Mode displays on the handset.
Troubleshoot Branch Office
When using Branch Office, you can see error messages on your screen. Table 4 lists
error messages and corrective actions.
Table 4
Troubleshoot Branch Office
Display Message
Probable Cause
Actions
Local Mode
Network problem.
Contact local network
administrator if problem
persists.
Local Mode
Invalid ID (1)
Gatekeeper unable to find end
point from Branch User ID.
Notify local network
administrator.
Local Mode
Invalid ID (2)
Branch User ID not found in
any equipped TN.
Notify local network
administrator.
99
Branch Office
100
Hospitality features
Hospitality features
The hospitality features in this section are intended for hotel operations.
Activate Message Registration
Use the Message Registration feature to read, change, or reset meters that log your
hotel calls.
To read meters:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Message Registration feature.
3. Enter the room Directory Number (DN).
4. Press the number key that corresponds
to the Message Registration feature
again.
To change a meter:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Message Registration feature.
3. Enter the room DN number.
4. Enter the correct meter count.
5. Press the * key.
6. Press the Line button to access the
Feature Keys menu.
7. Press the number key that corresponds
to the Message Registration feature
again.
To reset a meter to zero:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
101
Hospitality features
to the Message Registration feature.
3. Enter the room Directory Number (DN).
4. Press the * key.
5. Press the Line button to access the
Feature Keys menu.
6. Press the number key that corresponds
to the Message Registration feature
again.
Use Maid Identification
Use the Maid Identification feature to track the cleaning status of rooms. The maid
enters the information from the telephone in each room.
To enter cleaning status:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Room Status feature.
3. Enter the Directory Number (DN) for
the room for which the cleaning status is
being changed.
4. Enter one of the following cleaning
status codes:
1 = Cleaning requested
2 = Cleaning in progress
3 = Room cleaned
4 = Room passed inspection
5 = Room failed inspection
6 = Cleaning skipped
7 = Not for sale
The interrupted dial tone sounds.
5. Press the * key.
6. Enter the Maid ID. If you enter the
102
Hospitality features
wrong Maid ID, press the * key and
redial the ID.
7. Press the Line button to access the
Feature Keys menu.
8. Press the number key that corresponds
to the Room Status feature.
Display Room Status
The Room Status feature prints the status of a room by using the Display Module.
To read the status of a room:
1. Press the Line button to access the
Feature Keys menu.
2. Press the number key that corresponds
to the Room Status feature.
3. Enter the Directory Number (DN) for
the room. The DN displays followed by
a two-digit code.
The first digit indicates the occupancy
status:
0 = Room vacant
1 = Room occupied
The second digit indicates the cleaning
status of the room:
1 = Cleaning requested
2 = Cleaning in progress
3 = Room cleaned
4 = Room passed inspection
5 = Room failed inspection
6 = Cleaning skipped
7 = Not for sale
4. Press the Line button to access the
Feature Keys menu.
103
Hospitality features
5. Press the number that corresponds to the
Room Status feature.
To change the status of a room:
1. Press the Line button to access the
Feature Keys.
2. Press the number key that corresponds
to the Room Status feature.
3. Enter the Directory Number (DN) for
the room. The DN displays followed by
a two-digit code.
The first digit indicates the
occupancy status:
0 = Room vacant
1 = Room occupied
The next digit indicates the cleaning
status of the room:
1 = Cleaning requested
2 = Cleaning in progress
3 = Room cleaned
4 = Room passed inspection
5 = Room failed inspection
6 = Cleaning skipped
7 = Not for sale
4. Enter the status code for the room. A
three-digit code appears. The first digit
indicates the occupancy status, the
second the old cleaning status, and the
third the new status.
5. Press the Line button to access the
Feature Keys menu.
6. Press the number key that corresponds
to the Room Status feature.
104
Battery packs
Battery packs
This section provides information on the battery packs for the WLAN Handset 6120
and 6140.
The interchangeable Lithium Ion battery with standard capacity battery pack for the
WLAN Handset 6120 and 6140 must be recharged periodically. Interchangeable
Lithium Ion battery with standard capacity Standby time is when the handset is turned
on, but not in an active call.
— Standard Battery Pack capacity:
• for moderate call usage
• requires up to two hours to fully charge
— Extended Battery Pack capacity:
• for intermediate call usage
• requires up to three hours to fully charge
— Ultra-Extended Battery Pack capacity:
• for heavy call usage
• requires up to four hours to fully charge
Recommended battery replacement interval is every 12 - 13 months under normal
usage duty cycle.
Batteries deteriorate continuously at various rates from the time they are
manufactured. Storage temperature is an important deterioration factor for all types of
batteries. The cooler a battery is kept, the slower it will deteriorate, as long as its
temperature remains above freezing. Damaging changes can occur in some types of
batteries below freezing, so generally batteries should not be stored in a freezer or
otherwise in freezing temperatures.
Low battery indicators
The Battery Pack icon on the status line of the handset display provides a visual
indication of the amount of charge that remains in the Battery Pack. When the icon
shows empty, if the handset is in standby mode, you hear a brief, modulated-ring
signal, and the Battery Low message appears. The handset cannot be used until it is
charged. If you are in a call you hear soft beeps, first slow and then fast, until the
handset is unusable. When you first hear the beeps, you have two minutes to end the
call or change the Battery Pack.
105
Battery packs
Removing and inserting the battery pack
To remove a battery pack
1. Press down on the latch on the battery
pack at the back of the handset.
2. Pull the battery pack towards you.
The battery pack releases outward.
To insert a battery pack
1. Slide the lip of the battery pack into the
handset cavity.
2. Push the top of the battery pack until it
snaps into place.
Do not force the battery pack into the
handset.
Charging your handset
To charge a battery pack
You must charge the battery pack before its
first use.
1. Press End to terminate any calls.
The handset can be off or in standby
state during charging.
2. Place the handset, face forward, into the
Desktop Charger.
An animated charge icon indicates that
charging is in progress.
3. Charge the battery pack.
If the handset is in standby mode, it
displays its extension number and
Charging. It is fully operational and can
receive calls. If the handset is off, only
Charging is displayed and the handset
cannot receive calls.
106
Battery packs
It is normal for the battery pack to
become warm when charging.
4. When the handset is fully charged,
Charge Complete is displayed.
Remove the handset from the charger.
107
Desktop Chargers
Desktop Chargers
Three charger models are available for the WLAN Handset 6120 and 6140.
— Charges one handset with an installed battery pack.
— Charges the handset and a spare battery pack.
— Charges up to four battery packs at one time.
• Single Charger
• Dual Charger
• Quad Charger
Single Charger
The single charger is designed so that the handset can remain operational through
speakerphone or headset use while the battery pack is being charged. The handset can
also be charged while in standby mode or powered off mode.
Figure 5
The WLAN Handset 6120 and 6140 Desktop Charger
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
W
XYZ
<
*
0
# >
FCN
LINE
ATTENTION
Do not place anything in the Desktop Charger other than the WLAN
Handset 6120 and 6140. Because you might damage the contacts.
Bent contacts can stop the charging of the handset.
108
Desktop Chargers
Using the Single desktop charger
To charge the WLAN Handset 6120
and 6140
1. Press End to terminate any calls.
The handset can be off or in standby
state during charging.
2. Place the handset, face forward, into the
Desktop Charger.
An animated charge icon indicates that
charging is in progress.
3. Charge the battery pack.
If the handset is in standby mode, it
displays its extension number and
Charging. It is fully operational and can
receive calls. If the handset is off, only
Charging is displayed and the handset
cannot receive calls.
It is normal for the battery pack to
become warm when charging.
4. When the handset is fully charged,
Charge Complete is displayed.
Remove the handset from the charger.
Cleaning the Desktop Charger
Clean the Desktop Charger by wiping the surface with a plain-water-dampened cloth
or paper towel. A mild detergent solution can be used. Be sure to wipe away any
detergent residue with a plain-water-dampened cloth.
CAUTION
Do not immerse the charger in water or any other liquid.
Do not pour liquids into the charger slot.
You can clean the battery pack contacts on the handset with isopropyl (rubbing)
alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the
109
Desktop Chargers
exposed battery pack contacts.
ATTENTION
Always use the Desktop Charger provided to charge the battery
•
pack. Other chargers can damage the battery pack.
•
•
•
Only use the original plug-in power adapter for the Desktop Charger.
Do not dip the battery pack in water or throw into a fire.
Do not dispose of the battery pack with your domestic waste.Take
used battery packs to an appropriate collection point for recycling or
send them back to your supplier or servicing agent.
•
Replacement battery packs are available from your supplier or
servicing agent.
110
Dual Charger
Dual Charger
This section describes the dual charger available with the WLAN Handset 6120 and
6140.
The Dual Charger for the WLAN Handset 6120 and 6140 charges the battery pack in
the handset while it remains operational and also charges an additional battery pack in
the rear charging bay.
Figure 6
The WLAN Handset 6120 and 6140 Dual Charger
1
2AB
C
3DEF
4GH
I
5JKL
6MNO
7PQR
S
8TUV
9WXY
Z
<
*
0
#
>
FCN
LIN
E
The Dual Charger comes with the appropriate power supply for the site. Place the
Dual Charger on a flat, horizontal surface. Plug the power supply into the Dual
Charger and into an appropriate wall outlet.
ATTENTION
Do not place anything in the Dual Charger other than the WLAN
Handset 6120 and 6140 battery packs because you can damage the
contacts. Bent contacts can stop the charging of the battery packs.
The handset and spare battery cannot charge simultaneously. If both require charging,
the handset has priority and recharges first. After the handset is fully charged, the
spare battery is charged.
111
Dual Charger
Using the Dual Charger
To charge the WLAN Handset 6120
and 6140
1. Place the handset, face forward, into the
front slot of the Dual Charger.
The handset can be off or in standby
mode during charging. The LED
displays the charging status. See
instruction Single charger.
2. Charge the handset battery.
If the handset is in standby mode, it
displays its extension number and
Charging. It is fully operational and can
receive calls. If the handset is off, only
Charging is displayed and the handset
cannot receive calls.
It is normal for the battery pack to
become warm when charging.
3. When the handset is fully charged,
Charge Complete is displayed.
Remove the handset from the charger.
The battery pack starts to charge.
Cleaning the Dual Charger
Clean the Dual Charger by wiping the surface with a plain-water-dampened cloth or
paper towel. A mild detergent solution can be used. Be sure to wipe away any
detergent residue with a plain-water-dampened cloth.
CAUTION
Do not immerse the charger in water or other liquid.
Do not pour liquids into the charger slot.
You can clean the battery pack contacts on the handset with isopropyl (rubbing)
alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the
112
Dual Charger
exposed battery pack contacts.
IMPORTANT
Always use the Desktop Charger provided to charge the battery
•
pack. Other chargers can damage the battery pack.
•
•
•
Only use the original plug-in power adapter for the Desktop Charger.
Do not dip the battery pack in water or throw into a fire.
Do not dispose of the battery pack with your domestic waste. Take
used battery packs to an appropriate collection point for recycling or
send them back to your supplier or servicing agent.
•
Replacement battery packs are available from your supplier or
servicing agent.
113
Quad Charger
Quad Charger
This section describes the quad charger that is available with the WLAN Handset
6120 and 6140.
The quad charger is designed so that the handset can remain operational through
speakerphone or headset use while the battery pack is being charged. The Nortel
WLAN Handset 6120 and 6140 Quad Charger (see Figure 7) can simultaneously
charge four battery packs. You can mount the quad charger on either a horizontal or a
vertical surface. The battery pack snaps into the charging slot. The indicator light
above the occupied bay indicates the charging status of the battery pack in the bay.
Figure 7
The WLAN Handset 6120 and 6140 Quad Charger
The Quad Charger includes the appropriate power supply for the site. Place the Quad
Charger on a flat, horizontal surface. Plug the power supply into the Quad Charger
and into an appropriate wall outlet.
IMPORTANT
Do not place anything in the Quad Charger other than the WLAN
Handset 6120 and 6140 battery packs. You might damage the contacts.
Bent contacts can keep the battery packs from charging.
Using the Quad Charger
To charge a battery pack
1. Insert the battery pack into one of the
four charging bays.
The LED above the charging bay turns
on. If the LED starts to blink as soon as
114
Quad Charger
the battery pack is inserted, remove the
battery pack and reinsert it into the
charger.
If a flashing LED indicates a battery
pack failure, check the battery pack in a
different bay or substitute another
charger and repeat the operation that
caused the failure. If the same battery
pack lights a steady LED when inserted
in a different bay or charger, the first
charger can be faulty. Contact your
system administrator for service
information.
2. When charging is complete, the LED
turns off. Remove the battery pack from
the charger.
Cleaning the Quad Charger
Clean the Quad Charger by wiping the surface with a plain-water-dampened cloth or
paper towel. A mild detergent solution can be used. Be sure to wipe away any
detergent residue with a plain-water-dampened cloth.
CAUTION
Do not immerse the charger in water or any other liquid.
Do not pour liquids into the charger slot.
You can clean the battery pack contacts on the handset with isopropyl (rubbing)
alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the
115
Quad Charger
exposed battery pack contacts.
IMPORTANT
Always use the Quad Charger provided to charge the battery pack.
•
Other chargers can damage the battery pack.
•
•
•
Only use the original plug-in power adapter for the Quad Charger.
Do not dip the battery pack in water or throw into a fire.
Do not dispose of the battery pack with your domestic waste. Take
used battery packs to an appropriate collection point for recycling or
send them back to your supplier or servicing agent.
•
Replacement battery packs are available from your supplier or
servicing agent.
116
Terms you should know
Terms you should know
Attendant
A telephone operator in your organization.
Autodial
A telephone number programmed on the Autodial key
for one-touch dialing.
Call party information
The display showing Call Party Name Display (CPND)
information including the telephone number and name
of the incoming call. The system must have CPND
enabled.
Desktop Charger
The Desktop Charger is used to recharge the battery
pack for the WLAN Handset 6120 and 6140 and a spare
battery pack.
DNS
Domain Name System (DNS), an industry-standard
protocol, locates computers on an IP-based network.
Directory Number (DN)
Dual Charger
Feature display
A number consisting of one to seven digits for a handset.
This number is also known as an extension number.
The Dual Charger is used to recharge the battery pack
for the WLAN Handset 6120 and 6140
An area that shows status information about the feature
in use. It also displays the name and status of the active
session.
Feature keys
The features that are accessed by pressing the Line key.
117
Terms you should know
Fixed key
The hard-labeled keys on your handset..
Indicator
An LCD or an LED that indicates the status of a feature
by a flash, wink, steady on, or off.
Interrupted dial tone
More
A broken or pulsed dial tone, heard when you access
some of the features on your handset.
An option that enables access to the multiple layers of
the soft key features. These keys are the four keys
located directly below the display area.
Paging tone
A special tone that is heard when you use the Radio
Paging feature. You hear two beeps followed by dial
tone.
Primary Directory Number
The main extension number on your handset. It is also
called the Primary Directory Number (PDN) key.
Private Line
You can assign the Private Line feature to your handset.
With this line, you can reach an outside number without
dialing a code to access an outside line. Internal
extensions cannot be dialed from a private line.
Quad Charger
The Quad Charger is used to recharge up to four battery
packs at one time for the WLAN Handset 6120 and
6140.
Real-Time Location System (RTLS)
The Real-Time Location System (RTLS), a position and
tracking tool, is a fully automated system that
continually monitors the location of assets and
personnel.
118
Terms you should know
Secondary Directory Number
A second incoming/outgoing line for your handset.
Shared Directory Number
A DN (extension) that is shared by two or more persons.
Soft keys (self-labeled)
A set of keys programmed by your system
administrator. These four keys located directly below
the display area have four programmable layers. The
layers are accessed through the More key.
Special dial tone
Status Messages
The three consecutive tones followed by a dial tone that
you hear when you access handset features.
A message displayed to inform the user of important
information. A right arrow appears if more than one
Status Message is present. Examples of Status Messages
include: Message Waiting; All Lines Forwarded to:
6453; Do Not Disturb On; Ring Again active; Ringer is
OFF; and Line x Unavailable.
System or switch
TFTP
Your office communications system.
TFTP is used to update the WLAN Handsets 6120 and
6140 software over the 802.11b wireless LAN.
User Interface
In this User Guide, User Interface refers to the display
screen that interacts with the end user as a result of an
action or event.
119
Terms you should know
120
Index
Conference call 85
Index
Conference Hotline 73
A
Active (off-hook) state 25
Attendant 117
Attendant Recall 76
Auto Dial 117
Autodial 69
Desktop Charger 108, 109, 117
Directory Number 117
B
Battery packs 105
Branch Office 99
C
Call Forward 83
Call Join 85
Call Page Connect 93
Call Park 77
Call Party 77
Call party information 117
Call Pickup 79
Call Trace, Malicious 78
Call Waiting 80
Centrex/Exchange Switchhook Flash 93
Charge a call 94
Feature display 117
G
Group Call 87
Charge a Forced call 94
Charge the battery pack 112, 114
Charge the Wireless Handset 109, 112
Clean the Desktop Charger 109
Clean the Dual Charger 112
Clean the Quad Charger 115
H
High Noise Mode 56
Hold a call 75
Hospitality features 101
121
Index
I
Indicator status 118
Insert the battery pack 106
Internal Call Forward 84
Interrupted dial tone 118
Record a Caller’s Number 77
Redial last number called 70
L
Last Number Redial 70
Line key 22
Local mode 99
Lock the keypad 50
Low battery indicators 105
S
Security 46
M
Maid Identification 102
Make Set Busy 91
Message Registration 101
More Key 118
Shared Directory Numbers 119
Soft keys 119
speakerphone 24
N
Normal mode 99
System Speed Call 72
O
Override a busy signal 97
P
Paging tone 118
Power Off/End Call key 22
Power On/Start Call key 22, 25
Primary Directory Number 118
Privacy Release 97
Private Line 118
T
Transfer a call 75
Troubleshoot Branch Office 99
U
Push-to-Talk 38, 63
Up, Down, and Select buttons 23
122
Index
User Interface 119
User Option menu 50, 51, 56, 61, 62, 63
V
Volume
Ring 42
123
Index
124
Nortel Communication Server 1000
Nortel WLAN Handset 6120
and WLAN Handset 6140
Copyright © 2007 Nortel Networks. All Rights Reserved.
LEGAL NOTICE
While the information in this document is believed to be accurate and
reliable, except as otherwise expressly agreed to in writing NORTEL
PROVIDES THIS DOCUMENT “AS IS” WITHOUT WARRANTY OR
CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The
information and/or products described in this document are subject to
change without notice.
Nortel, the Nortel logo and the Globemark are trademarks of
Nortel Networks.
All other trademarks are the property of their respective owners.
Publication Number: NN43150-100
Document Release: Standard 02.01
Date: December 2007
Sourced in Canada
To provide feedback or report a problem in this document, go to
www.nortel.com
|