GE CleanDesign PHP900DM User Manual

Built-in CleanDesigncooktops  
Cooktop dimensions (in inches)  
GE Profile™  
PHP960SM  
PHP960DM  
PHP900SM  
To edge of front  
counter (min.)  
G
PHP900DM  
Overall  
Cutout  
ADA-compliant  
Features  
Model  
PHP960DM  
PHP900DM  
W
36  
29-3/4  
D
20-7/8  
21-3/8  
H
E
F
3-1/4*  
3-1/4*  
33-7/8  
19-1/8  
2-1/2**  
2-1/2**  
Pattern. black  
Pattern. black  
Pattern. black  
Pattern. black  
28-1/2  
19-5/8  
Ceramic-glass surface  
Number of elements  
Induction elements  
11" heating elements  
8" heating elements  
7" heating elements  
*Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.  
5 induction  
4 induction  
**Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.  
1 (3700W)  
1 (3200W)**  
2 (2500W)**  
1 (3700W) )**  
2 (2500W)**  
1 (1800W)**  
Stainless steel cooktop dimensions (in inches)  
6" heating elements  
Hot surface indicator lights  
Precise Digital Control System™  
Pan presence sensor  
Pan size sensor  
1 (1800W) )**  
To edge of front  
counter (min.)  
G
5
4
Overall  
D
Cutout  
Model  
W
H
E
F
36-1/8  
29-7/8  
21  
21-1/2  
3-1/4*  
3-1/4*  
33-7/8  
28-1/2  
19-1/8  
19-5/8  
2-1/2**  
2-1/2**  
PHP960SM  
PHP900SM  
Kitchen timer  
Control lock capability  
*Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.  
**Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.  
Appearance  
SS  
SS  
Color appearance*  
Frameless  
BB  
BB  
BB  
BB  
Cooktop dimensions (in inches)  
Stainless steel frame  
Weight & Dimensions  
Cooktop width (in inches)  
Approx. shipping wt. (lbs.)  
Power/Ratings  
SS models only  
SS models only  
D
36  
59  
30  
49  
W
H
Cooktop  
240V  
8.6  
6.5  
50  
7.4  
5.6  
40  
40  
KW rating @  
208V  
240V  
208V  
F
Amps @  
50  
*SS = Stainless Steel, BB = Black on black.  
**Highest wattage available using power share. Consult use and care manual for more  
information on powershare.  
E
G
Required  
Built-in induction cooktops  
Filler trim kit  
When replacing an old GE 30" cooktop (with  
larger opening) with 30" models, use the  
following one-piece trim kit to fill in the over-  
size hole. Available at additional cost.  
JXTR32B (Black)  
Requires a 12” min. free area between the  
bottom of the cooktop to any combustible  
material, i.e. shelving. Free area not required  
when installing wall oven underneath cooktop.  
Refer to installation instructions. Unite are  
furnished with a 36” flexible armored cable.  
Installation information:  
Before installing, consult installation  
instructions packed with product for current  
dimensional data.  
30” and 36” induction cooktops are approved  
for use over GE, GE Profile and GE Monogram  
30” and 27” single wall ovens*. Refer to cooktop  
and wall oven installation instructions packed  
with product for current dimensional data.  
*Except Trivection® wall ovens.  
Notes: If installing with a 36" GE Profile or GE Monogram® Telescopic Downdraft System, consult  
both cooktop and downdraft installation instructions packed with product before installing.  
Cooktop gas/electric supply may need to be re-routed to install downdraft.  
The countertop must be at least 26" deep with a flat surface area of 23-1/2" or more, front to back.  
Stainless CleanDesign and gas on glass cooktops require 23-5/8" flat surface area. In addition,  
other clearances to the front edge of the countertop must be considered.  
Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation prior to install.  
70  

Hanns G Computer Monitor HSG1078 User Manual
GE 28821xx5 User Manual
Diamond Multimedia Radeon X1950XT User Manual
Dell E178WFP User Manual1
Cypress CY7C1525KV18 User Manual
Asus P8H77 V User Manual
Asus P5WD2 User Manual
Apple 5 inch flat panel monitor User Manual
Aluratek ACDUES350F User Manual
Accell MPC 816 Series User Manual