FUNAI FDR 90E User Manual

Owner’s Manual

DVD Recorder

FDR-90E

VCR Plus+ and PlusCode are registered trademarks of

Gemstar Development Corporation.TheVCR Plus+

system is manufactured under license from Gemstar

Development Corporation.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS

INSTRUCTIONS EN FRANÇAIS INCLUSES

Supplied Accessory

• Remote control

(NA816UD)

with two AA batteries WPZ0901CAB01)

• RF cable

(WPZ0901TM002 or

• Audio/Video cables

(WPZ0102TM015 or

WPZ0102LTE01)

• Owner’s Manual

(1VMN20268)

• Quick Use Guide

(1VMN20269)

Owner's Manual

Please read before using this equipment.

If you need additional operating assistance after reading this owner’s manual or to

order replacement accessories, please call

TOLL FREE : 1-800-605-8453

or visit our web site at http://www.funai.us

Before you use this unit, you need to complete connections.

Refer to “Connections” on pages 13-15.

To record a program easily, refer to “Easy DVD recording” on pages 16-17

after connections are completed.

(You CANNOT record on any copyright protected DVD disc with this DVD recorder.)

Before you start

Precautions (cont’d)

Important Safeguards

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

porting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of anten-

na-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig.A)

2. Retain Instructions-The safety and operating instructions should

be retained for future reference.

3. HeedWarnings -All warnings on the appliance and in the oper-

ating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should

be followed.

FIGURE A

ANTENNA

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

LEAD

WIRE

5. Cleaning - Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

EXCEPTION:A product that is meant for uninterrupted ser-

vice and, that for some specific reason, such as the possibility

of the loss of an authorization code for a CATV converter, is

not intended to be unplugged by the user for cleaning or any

other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in

item 5.

6.Attachments - Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7.Water and Moisture- Do not use this product near water, for

example, near a bath tub, wash bowl, kitchen sink, or laundry

tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories - Do not place this product on an unstable cart,

stand,tripod,bracket,or table.The product may fall,causing seri-

ous injury to a child or adult, and serious damage to the appli-

ance. Use only with a cart, stand, tripod, bracket, or table rec-

ommended by the manufacturer, or sold

with the product. Any mounting of the

appliance should follow the manufacturer's

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

14. Lightning - For added protection for this product during a light-

ning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect

the antenna or cable system. This will prevent damage to the

product due to lightning and power-line surges.

15. Power Lines -An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or cir-

cuits.When installing an outside antenna system, extreme care

should be taken to keep from touching such power lines or cir-

cuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension cords

as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind into

this product through any openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the product.

18. Servicing - Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous volt-

age or other hazards. Refer all servicing to qualified service per-

sonnel.

19. Damage Requiring Service - Unplug this product from the wall

outlet and refer servicing to qualified service personnel under

the following conditions:

a. When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the product.

c.If the product has been exposed to rain or water.

d.If the product does not operate normally by following the oper-

ating instructions.Adjust only those controls that are covered by

the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive

work by a qualified technician to restore the product to its nor-

mal operation.

instructions and should use a mounting

accessory recommended by the manufac-

turer. An appliance and cart combination

should be moved with care. Quick stops,

excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

9.Ventilation - Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and

to protect it from overheating, and these openings must not be

blocked or covered.The openings should never be blocked by

placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

10. Power Sources -This product should be operated only from the

type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home,consult your

appliance dealer or local power company. For products intend-

ed to operate from battery power,or other sources,refer to the

operating instructions.

11. Grounding or Polarization - This product is equipped with a

polarized alternating-current line plug (a plug having one blade

wider than the other).This plug will fit into the power outlet

only one way.This is a safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the polar-

ized plug.

12. Power Cord Protection - Power supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them,paying particular attention to cords

at plugs, convenience receptacles, and the point where they exit

from the appliance.

e.If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance this

indicates a need for service.

20. Replacement Parts - When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, elec-

tric shock or other hazards.

21. Safety Check - Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

22. Heat -This product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

13. Outdoor Antenna Grounding - If an outside antenna or cable

system is connected to the product, be sure the antenna or

cable system is grounded so as to provide some protection

against voltage surges and built-up static charges.Article 810 of

the National Electrical Code,ANSI/NFPA No.70,provides infor-

mation with regard to proper grounding of the mast and sup-

Before you start

Precautions (cont’d)

Installation Location

Symbol in this owner's manual

Many functions of this DVD recorder are depending on

the disc type or the recording mode.

To specify for what disc type or recording mode each

function is, we put the following symbols at the beginning

of each item to operate.

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do not

place anything directly on top of the unit. Do not place

the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat

dissipation. Do not block the ventilation holes on the

sides of the unit. Avoid locations subject to strong vibra-

tion or strong magnetic fields.

Symbol

DVD-V

Description

Available to DVDVideo discs

Avaialble to DVD-RW inVideo mode

Avaialble to DVD-RW inVR mode

Available to DVD-R discs

DVD-RW

DVD-R

CCDD

Avoid the Hazards of Electrical Shock

and Fire

Available to Audio CDs

Available to CD-R/RW discs with

MP3 files

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

MP3

• If, by accident, water is spilled on this unit, unplug the

power cord immediately and take the unit to our

Authorized Service Center for servicing.

Maintenance

SERVICING

• Please refer to relevant topics on the Troubleshooting

Guide on pages 96-99 before returning the product.

• If this unit becomes inoperative, do not try to correct the

problem by yourself.There are no user-serviceable parts

inside.Turn off, unplug the power plug, and please call our

help line mentioned on the front page to locate an

Authorized Service Center.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it

is moved from a cold place to a warm place, or after heat-

ing a cold room or under conditions of high humidity. Do

not use this unit at least for 2 hours until its inside gets

dry.

About Copyright

Unauthorized copying, broadcasting, public performance

and lending of discs are prohibited.

CLEANINGTHE CABINET

• Use a soft cloth slightly moistened with a mild detergent

solution. Do not use a solution containing alcohol, spirits,

ammonia or abrasive.

This product incorporates copyright protection technolo-

gy that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by

Macrovision Corporation and other rights owners. Use of

this copyright protection technology must be authorized

by Macrovision Corporation, and is intended for home and

other limited viewing uses only unless otherwise autho-

rized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

CLEANING DISCS

• When a disc becomes dirty, clean it with a cleaning

cloth.Wipe the disc from the center out. Do not wipe in

a circular motion.

• Do not use solvents such as benzine, thinner, commer-

cially available cleaners, detergent, abrasive cleaning

agents or antistatic spray intended for analogue records.

Notice for progressive scan outputs

CLEANINGTHE DISC LENS

Consumers should note that not all high definition televi-

sion sets are fully compatible with this product and may

cause artifacts to be displayed in the picture. In case of

525 progressive scan picture problems, it is recommended

that the user switch the connection to the ‘standard defin-

ition’ output. If there are questions regarding our TV set

compatibility with this model 525p DVD recorder, please

contact our customer service center.

• If this unit still does not perform properly although you

refer to the relevant sections and to “TROUBLESHOOT-

ING GUIDE” in this Owner’s Manual, the laser optical pick-

up unit may be dirty. Consult your dealer or an Authorized

Service Center for inspection and cleaning of the laser opti-

cal pickup unit.

DISC HANDLING

• Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is

not used.

Before you start

Table of contents

Skipping TV commercials during play . . . . . . . . . . . .50

Before you start . . . . . . . . . . . . . . . . . . .2

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .51

Slow forward / Slow reverse play . . . . . . . . . . . . . . .51

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Spatializer setting (Virtual surround) . . . . . . . . . . . .52

Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .54

Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .5

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Functional overview . . . . . . . . . . . . . . . . . . . . . . .7

Installing batteries in the remote control . . . . . . . . . .9

Using a remote control . . . . . . . . . . . . . . . . . . . . . . .9

SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . .10

DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Repeat/Random/Program playback . . . . . . . . . .56

Connections . . . . . . . . . . . . . . . . . . . . .13

Connection to aTV . . . . . . . . . . . . . . . . . . . . . . .13

Connection to a cable box or satellite box . . . .14

When connecting to a cable box or satellite box with

only a few scrambled channels . . . . . . . . . . . . . . . . .14

When connecting to a cable box or satellite box with

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Random playback . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Selecting the format of audio and video . . . . . .58

Switching audio soundtrack . . . . . . . . . . . . . . . . . . .58

Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .59

Switching camera angles . . . . . . . . . . . . . . . . . . . . . .60

Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .60

many scrambled channels . . . . . . . . . . . . . . . . . . . . .14

Connection to an Audio System . . . . . . . . . . . . .15

Getting started . . . . . . . . . . . . . . . . . . .16

Editing . . . . . . . . . . . . . . . . . . . . . . . . .61

Information on disc editing . . . . . . . . . . . . . . . . .61

Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .61

Editing discs withVideo mode . . . . . . . . . . . . . . . . .61

Editing discs withVR mode . . . . . . . . . . . . . . . . . . .62

Editing DVD-RW discs inVideo mode . . . . . . . .63

Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Putting names on titles . . . . . . . . . . . . . . . . . . . . . .64

Setting or clearing chapter markers . . . . . . . . . . . . .66

Editing DVD-RW discs inVR mode (Original) . .67

Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .68

Putting names on titles . . . . . . . . . . . . . . . . . . . . . .69

Setting or clearing chapter markers . . . . . . . . . . . . .71

Setting pictures for thumbnails . . . . . . . . . . . . . . . . .72

Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .74

Releasing titles from protecting . . . . . . . . . . . . . . . .75

Editing DVD-RW discs inVR mode (Playlist) . . .76

Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .77

Putting names on titles . . . . . . . . . . . . . . . . . . . . . .78

Setting or clearing chapter markers . . . . . . . . . . . . .80

Setting pictures for thumbnails . . . . . . . . . . . . . . . . .81

Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .83

Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .85

Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Putting names on titles . . . . . . . . . . . . . . . . . . . . . .86

Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .16

Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .18

Getting channels automatically . . . . . . . . . . . . . . . . .18

Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .19

Guide channel setting . . . . . . . . . . . . . . . . . . . . . . .20

Selecting theTV stereo or SAP . . . . . . . . . . . . .22

Clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .23

Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .24

Setting the daylight saving time . . . . . . . . . . . . . . . .26

Selecting theTV aspect ratio . . . . . . . . . . . . . . .27

Recording . . . . . . . . . . . . . . . . . . . . . . .28

Information on DVD recording . . . . . . . . . . . . . .28

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Restrictions on recording . . . . . . . . . . . . . . . . . . . .28

Information on copy control . . . . . . . . . . . . . . . . . .29

Making discs playable in other DVD player (Finalize) 29

Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .30

Settings for the recording format to a blank disc . . .30

Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .32

Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .33

Checking the recording picture quality . . . . . . . . . .34

One-touch timer recording . . . . . . . . . . . . . . . .35

Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .36

Hints for timer recording . . . . . . . . . . . . . . . . . . . . .38

Timer recording usingVCR Plus+ system . . . . .39

Settings for an external source . . . . . . . . . . . . . .40

Connection to an external source . . . . . . . . . . . . . .40

Recording from an external source . . . . . . . . . . . . .41

Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .42

Changing the SETUP menu . . . . . . . . .87

Tour of the SETUP menu . . . . . . . . . . . . . . . . . .87

Settings for Language . . . . . . . . . . . . . . . . . . . . .88

Settings for Display . . . . . . . . . . . . . . . . . . . . . . .90

Settings for Audio . . . . . . . . . . . . . . . . . . . . . . . .92

Settings for Parental lock level . . . . . . . . . . . . . .94

Setting a disc to protect . . . . . . . . . . . . . . . . . . .43

Playing discs . . . . . . . . . . . . . . . . . . . . .44

Information on DVD play . . . . . . . . . . . . . . . . . .44

Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Playing discs using the disc menu . . . . . . . . . . . . . . .47

Playing discs using the title menu . . . . . . . . . . . . . . .48

Special playback . . . . . . . . . . . . . . . . . . . . . . . . .49

Others . . . . . . . . . . . . . . . . . . . . . . . . .96

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .96

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Language code . . . . . . . . . . . . . . . . . . . . . . . . .101

Español . . . . . . . . . . . . . . . . . . . . . . . .102

Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .49

Françaisl . . . . . . . . . . . . . . . . . . . . . . .104

Before you start

Features

This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and

edit them after that.

The following features are offered with this DVD recorder.

Recording

Editing

This DVD recorder is compatible with both DVD-RW,

which is rewritable repeatedly and DVD-R, which is avail-

able for recording once.You can choose either one for

your convenience.

Setting/Clearing chapter markers:

You can easily add chapter markers anywhere in your

recordings for easy editing. (VR mode)

Making your own Playlist:

Up to 8 program recording:

With the original remains as it is, you can edit titles on

various Playlist as you prefer.

Putting names on titles

You can program the DVD recorder to record up to 8

programs, up to a year in advance. Daily or weekly pro-

gram recordings are also available.

Setting pictures for thumbnails

One-touch timer recording:

Setting/clearing chapter markers

Deleting parts of titles etc

Protecting titles:

To avoid editing or erasing titles, the protect function is

useful when it is ON in the original list.

You can easily set a recording time as you prefer. Every

time the REC/OTR button on the remote control or the

REC button on the front panel pressed during recording,

the recording time will be increased by 30 minutes up to 4

hours.The recording automatically stops when the record-

ing time you set is reached.

Compatibility

TheVCR Plus+ system:

Available for playing discs recorded inVideo mode

on a regular DVD player (Video mode):

Discs recorded inVideo mode can be played on regular

DVD players, including computer DVD drives compatible

with DVD-Video playback*.You will need to finalize the

discs recorded inVideo mode to play in other DVD play-

ers.

You can program the automatic timer recording using the

PlusCode programming numbers that are printed in most

newspaper TV listings and TV Guide magazine.

REC MONITOR:

You can confirm the picture quality for recording in the

current recording speed which you set. If you want to

change the recording speed, press REC SPEED button to

set the desired recording mode.

* DVD-Video Format (Video mode) is a new format for record-

ing on DVD-R/RW discs that was approved by the DVD Forum

in 2000. Adoption of this format is optional for manufactures

of DVD playback devices and there are DVD-Video players,

DVD-ROM drives or other DVD playback devices that do not

play DVD-R/RW discs recorded in the DVD-Video Format.

Automatic Chapter marker setting:

Chapter markers will be put on recordings as you set in

SETUP menu before attempting to record.

AutomaticTitle menu making:

The DVD recorder makes title menus automatically when

finalizing the disc which are recorded inVideo mode.

Automatic PLAYLIST making (VR mode):

A Playlist will be prepared from an Original list, so that

you can edit titles in a Playlist as you prefer.

An Original list is kept as it is.

Others

Progressive Scan system

Unlike conventional interlace scanning, the progressive scan

system provides less flickering and images in higher resolu-

tion than that of traditional television signals.

Play

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

Spatializer:

You can enjoy stereophonic virtual sound of Spatializer®

N-2-2 ultra™ method provided by Desper Products, Inc.

Theater surround sound in your home:

“DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

When connecting the DVD recorder to an amplifier or a

decoder which is compatible with Dolby Digital or DTS,

you are allowed to experience the theater surround sound

from discs with surround sound system.

Certain audio features of this product manufactured

under a license from Desper Products, Inc.

Spatializer® N-2-2 Ultra™ and the circle-in-square

device are trademarks owned by Desper Products,

Inc.

Quick search for what you want to watch:

You can easily find the part you want to watch using the

search function. Search for a desired point on a disc by

title, chapter or time.

Start to play from Original and Playlist:

Title playing is available from either an Original list or

Playlist.

Before you start

Functional overview

Front Panel

2 3 4 5 6 7

STOP

REV

PLAY FWD

CHANNEL

OPEN/CLOSE

POWER

S-VIDEO

VIDEO

AUDIO

REC

REC SPEED

15 14 13 12 11

1. POWER button

9. Display

Press to turn the DVD recorder on and off.

If timer programmings have been set, press to

set the unit in timer-standby mode.

2. STOP C button

Press to stop play or recording.

3. REV H button

Refer to “Guide to Displays on the front panel” on

page 12.

10. Remote control sensor

Receive signals from your remote control so that you

can control the DVD recorder from a distance.

11. REC SPEED button

Press to skip to the previous chapter or track.

Press and hold for 1.5 seconds to fast reverse.

4. PLAY B button

Press to switch the recording speed.

12. REC button

Press once to start a recording. Press repeatedly to

start a One-Touch Recording.

Press to start or resume play.

5. FWD G button

13. AUDIO (L/R) input jacks (LINE2)

Use to connect external equipment with standard

audio cables.

14. VIDEO input jack (LINE2)

Use to connect external equipment with a standard

video cable.

15. S-VIDEO input jack (LINE2)

Use to connect the S-Video output of external equip-

ment with an S-Video cable.

Press to skip to the next chapter or track.

Press and hold for 1.5 seconds to fast forward.

6. CHANNEL L / K button

Press to change the channel up and down.

7. A OPEN/CLOSE button

Press to open or close the disc tray.

8. Disc tray

Place a disc when open.

Rear Panel

3 4 5

OUTPUT

VIDEO

AUDIO

S-VIDEO

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

PB/CB

PR/CR

OUT

INPUT

(L1)

VIDEO

TV ANTENNA

COMPONENT

VIDEO OUTPUT

COAXIAL

AUDIO

S-VIDEO

11 10

9 8

1. AC Power Cord

7. TV ANTENNA OUT jack

Connect to a standard AC outlet to supply power to this

unit.

2. AUDIO OUTPUT jacks 1, 2

Use to connect a TV monitor,AV receiver or other

equipment with standard audio cables.

3. VIDEO OUTPUT jack

Use to connect a TV monitor,AV receiver or other

equipment with a standard video cable.

4. S-VIDEO OUTPUT jack

Use to connect the S-Video input of a TV monitor,AV

receiver or other equipment with an S-Video cable.

5. COMPONENTVIDEO OUTPUT jacks

Use to connect a TV monitor with component video

inputs with component video cables.

Use to connect an antenna cable to pass the signal

from the TV ANTENNA IN to your TV monitor.

8. S-VIDEO INPUT jack(LINE1)

Use to connect the S-Video output of external equip-

ment with an S-Video cable.

9. VIDEO INPUT jack(LINE1)

Use to connect external equipment with a standard

video cable.

10. AUDIO INPUT jacks(LINE1)

Use to connect external equipment with standard

audio cables.

11. DIGITAL AUDIO OUTPUT jacks

Use to connect an AV receiver, Dolby Digital decoder,

DTS decoder or other equipment with digital input

jacks with a digital coaxial cable or a digital optical

cable.

6. TV ANTENNA IN jack

Use to connect an antenna.

Note

• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to

the DVD recorder.

• This unit does not have the RF modulator

Before you start

Functional overview (cont’d)

Remote Control

11. REV E button

During playback, press to play

fast reverse.

OPEN/

POWER

Or during playback is paused,

press to play slow reverse.

12. STOP C button

Press to stop play or record-

ing.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

13. PAUSE F button

Press to pause play or

recording.

SPACE

14. OPEN/CLOSE A button

Press to open or close the

disc tray.

15. Number buttons

Press to select channel numbers.

Press to select a title/chap-

ter/track on display or a TV

channel.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press to enter theVCR Plus+

programming number.

Or press to enter values for

the settings in the SETUP

menu.

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

16. DISPLAY button

Press to display or change the

on-screen display.

SKIP

STOP

PLAY

17. ZOOM button

During playback, press to

enlarge the picture on the

screen.

REV

FWD

PAUSE

18. TOP MENU button

Press to display the top

menu.

1. POWER button

Press to turn the DVD

recorder on and off.

6. MENU/LIST button

Press to display the Disc

menu.

19. ENTER button

Press to confirm or select

menu items.

If timer programmings have

been set, press to set the unit

in timer-standby mode.

To change ORIGINAL and

PLAYLIST on the TV screen.

(VR mode only)

20. SETUP button

Press to display the setup

menu.

2. VCR Plus+ button

Press to set a timer recording

with theVCR Plus+ program-

ming system.

7. K / L / { / B buttons

Press to select items or set-

tings.

During DVD playback, press

and hold for more than 3 sec-

onds to switch to the pro-

gressive scanning mode or

the interlace mode.

8. RETURN

button

Press to display the timer

program setting menu.

Press to return to the previ-

ously displayed menu screen.

9. REC MONITOR button

Press to check the video to be

recorded before attempting.

10. SKIP H button

21. REC SPEED button

Press to switch the recording

speed.

22. REC/OTR button

Press once to start a record-

ing. Press repeatedly to start

a One-Touch Recording.

23. CH K / L buttons

Press to change the channel

up and down.

24. FWD D button

During playback, press to play

fast forward.

Or during playback is paused,

press to play slow forward.

25. PLAY B button

Press to start or resume play.

3. CLEAR button

Press to clear the password

once entered or to cancel the

programming for CD or to

clear the selecting marker num-

ber in the marker setup mode

or to clear the program once

entered in the timer recording

setting mode,etc.

During playback, press to skip to

the previous chapter or track. Or

during play is paused, press to play

reverse step by step.

SKIP G button

4. REPEAT button

Press to display the repeat

setting menu.

5. CM SKIP button

During playback, press to skip

the 30 seconds.

During playback, press to skip to

the next chapter or track.

Or during playback is paused,

press to play forward step by step.

Before you start

Functional overview (cont’d)

Installing batteries in the remote control Using a remote control

Install two AA batteries (supplied) matching the

polarity indicated inside battery compartment of the

remote control.

Keep in mind the following when using the remote

control:

• Make sure that there is no obstacle between the

remote control and the remote sensor on the

DVD recorder.

• Use within the operating range and angle as

shown.

• Remote operation may become unreliable if strong

sunlight or fluorescent light is shining on the

remote sensor of the DVD recorder.

• Remote control for different devices can interfere

with each other. Avoid using remote control for

other equipment located close to the DVD

recorder.

• Replace the batteries when you notice a fall off in

the operating range of the remote control.

Within about

23feet (7m)

60˚

WER

.@/

GHI

JKL

DEF

TUV

MNO

Remote

WXYZ

ZOOM

control

Note:

Incorrect use of batteries can result in hazards such

as leakage and bursting. Please observe the following:

• Do not mix new and old batteries together.

• Do not use different kinds of batteries together,

although they may look similar, different batteries

may have different voltages.

• Make sure that the plus and minus ends of each

battery match the indications in the battery com-

partment.

• Remove batteries from equipment that is not going

to be used for a month or more.

• When disposing of used batteries, please comply

with governmental regulations or environmental

public instruction's rules that apply in your country

or area.

• Do not recharge, short-circuit, heat, burn or disas-

semble batteries.

Before you start

Functional overview (cont’d)

Guide to On Screen Menu

The DVD recorder uses the following types of display for most operations. SETUP/DISC/CD menu,Title list,

and DISPLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you some

disc information for checking the status of the disc.

SETUP/DISC/CD menu

Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by { / B button.

Then, press ENTER button to display each menu.

These provides entries to all main functions of the DVD recorder.

“DISC” is available only when a DVD-R/RW disc is

inserted into the DVD recorder.

When a DVD-Video disc (commercially available), a

“CD” is available only when an

Audio CD disc or a CD-R/RW

disc with MP3 files is inserted

“SETUP” is available only in

the Stop mode.

new DVD-R disc or the finalized DVD-R disc is insert- into the DVD recorder.

ed into the DVD recorder, you cannot select “DISC”.

Setup Menu

Setup

Disc Setting

CD Playback Mode

Disc

Edit

Random Play

Program Play

Format

Finalize

Disc Protect OFF ON

1 2 3 4

1 2

Playback Setting

1. Playback:

1. Edit:

1. Random Play:

To set up the DVD recorder to

play discs as you prefer.

2. Recording:

Turns on a title list, (When a disc

withVR mode is inserted,

'Original' or 'PlayList' is available.), 2. Program Play:

To set the random play program-

ming.

To set up the DVD recorder to

record to discs as you prefer.

3. Display:

which shows the recorded titles

on the disc.

2. Format:

To set the program playing.

To set up the OSD screen and the Allows you to erase all of the

front display of the DVD recorder recorded content on the disc.

as you prefer.

4. SelectVideo:

The disc will be completely blank.

3. Finalize:

To choose a line input to record

to DVD discs from other video

equipment.

Allows you to finalize a disc

recorded titles.

4. Disc Protect (VR mode

only) :

5. Clock:

To set up the clock of the DVD

recorder as you need.

6. Channel:

Allows you to protect a disc from

accidental editing or recording.

To make the channel setting of

the DVD recorder as youprefer.

Before you start

Functional overview (cont’d)

DISPLAY menu

1. Indicates a disc type and a

format mode.

4. Each icon means:

Press DISPLAY button to call up

the display menu.This menu will

give you the information on the

playing disc. Some operations are

available while disc is playing.

: Search

Note:

: Audio

In some descriptions on this

manual, only one disc type is

indicated as an example.

2. Indicates a recording mode

and possible recording time

left/lndicates a channel num-

ber.

3. Indicates a title number, chap-

ter number and the time

elapsed of disc play.

: Subtitle

: Angle (exceptVR mode)

: Repeat

Details are on page 44.

: Marker

: Noise Reduction

: Zoom

DVD-RW

00:00:00

Video mode

SP 1:25 Rem.

: Spatializer

Before you start

Functional overview (cont’d)

Guide to Displays on the front panel

1. Current status of the

2. Disc type

4. Title/Track and Chapter

DVD recorder

mark

Appears when an audio

CD or a disc with MP3

files is inserted in the disc

tray.

: Appears when a disc play

is paused.

: Appears when indicating

a title/track number.

: Appears when playing a

disc.

: Appears when indicating

a chapter number.

5. Displays the following

• Playing time / remaining time

• Current title / chapter / track

number

• Recording time

• Clock

• Channel number

• OTR remaining time

: Appears when a DVD

disc is inserted in the

disc tray.

: Appears when the timer

programming has been

set and is proceeding.

Appears when a DVD-R

disc is inserted in the

disc tray.

: Appears during recording

process.

Appears when repeat

play.

Appears when a DVD-

RW disc is inserted in

the disc tray.

: Appears in the after-

noon with the clock

displaying.

3. Recording speed

Indicates the recording speed of

the disc.

Appears when the pro-

gressive scan system is

activated.

Display message

1. Appears when the DVD

recorder is powered on.

2. Appears when the DVD

recorder is powered off.

3. Appears when the disc tray is

opening.

4. Appears when the disc tray is

closing.

5. Appears when a disc is load-

ing in the disc tray.

6. Appears when recording data

is writing on to the disc.

Connections

Connection to aTV

Antenna

Cable

Signal

Cable

Signal

(Back of TV)

AUDIO IN

VIDEO

(Back of TV)

Connect

Video

Cable

(supplied)

Audio

Cable

(supplied)

Connect

RF Cable

(supplied)

OUTPUT

VIDEO

AUDIO

S-VIDEO

DIGITAL AUDIO OUTPUT

PCM

BITSTREAM

PB/CB

PR/CR

OUT

Connect

INPUT

(L1)

VIDEO

TV ANTENNA

Disconnect

COMPONENT

VIDEO OUTPUT

COAXIAL

AUDIO

S-VIDEO

(Back of DVD recorder)

Plug in the AC power cord of the DVD recorder.

Make one of the following connections, depending on the capabilities of your existing equipment.

Method 1

Method 2

Basic Audio

Better picture

Best picture

COMPONENT

VIDEO IN

AUDIO IN

S-VIDEO IN

PB/CB

PR/CR

S-Video

Audio cable

(supplied)

Component

Video cables

(commercially

available)

cable

(commercially

available)

DVD Recorder

OUTPUT

S-VIDEO

AUDIO

PB/CB

PR/CR

OUTPUT

VIDEO

AUDIO

S-VIDEO

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

PB/CB

OUT

PR/CR

INPUT

(L1) VIDEO

TV ANTENNA

COMPONENT

VIDEO OUTPUT

COMPONENT

VIDEO OUTPUT

COAXIAL

AUDIO

S-VIDEO

S-VIDEO OUT

OUTPUT

AUDIO

COMPONENT VIDEO OUT

AUDIO OUT

Note

•

Connect this unit directly to the TV. If the A/V cables are connected to aVCR, pictures may be distorted due to the copy

protection system.

When progressive scanning mode is selected, no video signal will be output from theVIDEO OUT or S-VIDEO OUT jack.

If yourTV is compatible with 525p (480p) progressive scanning and you want

to enjoy that high quality picture;

RETURN

SETUP

You must select the connection Method 2 above and progressive scanning mode.To set

the mode, press and hold the SETUP button on the remote control for more than 3 sec-

onds during DVD playback, so that “P.SCAN” will appear on the display of this unit.

If yourTV is not compatible with progressive scanning;

Use this unit in interlace mode. Make sure that no “P.SCAN” is on the display of this unit.

If not, press and hold the SETUP button on the remote control for more than 3 seconds

during DVD playback, so that “P.SCAN” on the display of this unit will disappear.

more than 3 seconds

during DVD playback

[Interlace mode]

[Progressive scanning mode]

Connections

Connection to a cable box or satellite box

When connecting to a cable box or satellite box with only a few scrambled

channels

If you are using a cable box or satellite box with only a few scrambled channels, follow the setup on this

page. If many or all the channels are scrambled, we recommend using the setup on the following page.

With this setup:

• You can record any unscrambled channel by selecting the channel on the DVD recorder.

• You cannot record scrambled channels that require a cable box or satellite box.

(Cable box or

Satellite box)

(Back of TV)

AUDIO IN

VIDEO

OUT

RF cable

Connect

RF cable

(supplied)

Connect

Video

cable

(supplied)

Audio

cable

(supplied)

Cable

Signal

OUTPUT

RF cable

AUDIO

VIDEO

S-VIDEO

DIGITAL AUDIO OUTPUT

PCM

BITSTREAM

PB/CB

PR/CR

OUT

Connect

INPUT

(L1)

TV ANTENNA

COMPONENT

VIDEO OUTPUT

COAXIAL

AUDIO

VIDEO

S-VIDEO

(Back of DVD recorder)

When connecting to a cable box or satellite box with many scrambled

channels

If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.

With this setup:

• You can record any unscrambled channel by selecting the channel on the cable box or satellite box. Be sure

that the cable box or satellite box is turned on.

• You cannot record one channel while watching another channel.

(Back of TV)

AUDIO IN

VIDEO

Connect

Video

cable

(supplied)

Audio

cable

(supplied)

Connect

(Cable box or

Satellite box)

Cable

Signal

RF cable

(supplied)

OUT

OUTPUT

VIDEO

AUDIO

S-VIDEO

DIGITAL AUDIO OUTPUT

PCM

BITSTREAM

PB/CB

PR/CR

RF cable

Connect

OUT

INPUT

(L1)

VIDEO

TV ANTENNA

COMPONENT

VIDEO OUTPUT

COAXIAL

AUDIO

(Back of DVD recorder)

Note to the Cable TV System Installer :

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the

National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the

cable ground shall be connected to the grounding system of the building, as close to the point of cable

entry as possible.

Connections

Connection to an Audio System

• When you change the connections, all devices should be turned off.

• Refer to each owner’s manual for further information on other devices.

Method 1

Method 2

Stereo system

Dolby Digital decoder, DTS

decoder, MD deck or DAT deck

Analog audio

input jacks

Digital audio

input jacks

AUDIO

COAXIAL

OPTICAL

Audio Coaxial

Digital cable

(commercially

available)

Audio Optical

Digital cable

(commercially

available)

Audio cable

(supplied)

DVD Recorder

AUDIO OUT

OUTPUT

DIGITAL AUDIO OUTPUT

PCM / BITSTREAM

AUDIO

DIGITAL

AUDIO OUT

COAXIAL

OUTPUT

Note

AUDIO

• If output is Dolby Digital encoded audio, connect to a

Dolby Digital decoder and set “Dolby Digital” to

“Stream” for the “Digital Out” setting in the SETUP

menu. (Refer to pages 92-93.)

• If output is DTS encoded audio, connect to a DTS

decoder and set “DTS” to “ON” for the “Digital Out”

setting in the SETUP menu. (Refer to pages 92-93.)

• The audio source on a disc in a Dolby Digital 5.1 channel

surround format cannot be recorded as digital sound by

an MD or DAT deck.

• Unless connected to a Dolby Digital decoder or a DTS

decoder, set “Dolby Digital” to “PCM” and “DTS” to “OFF”

for the “Digital Out” setting in the SETUP menu. Playing a

DVD using incorrect settings may generate noise distor-

tion and may also damage the speakers. (Refer to pages

92-93.)

• Set “Dolby Digital” to “PCM” for the “Digital Out” set-

ting in the SETUP menu for connecting to an MD deck

or DAT deck. (Refer to pages 92-93.)

• By hooking this unit up to a Multi-channel Dolby Digital

decoder, you can enjoy high-quality Dolby Digital 5.1

channel surround sound as heard in the movie theaters.

• By hooking this unit up to the DTS decoder, you can

enjoy 5.1 channel surround system which reproduces the

original sound as truthfully as possible. 5.1 channel sur-

round system is developed by the Digital Theater System,

Inc.

Optical cable (not supplied)

• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a

diameter of 15 cm or more when storing them.

• Use a cable which is 3 m or shorter.

• Insert cable plugs firmly into the connectors when making connections.

• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.

Getting started

Easy DVD recording

The following will help you to understand easily how to record to DVD discs.

Note:

Make sure batteries are in the remote control and you have connected this unit and the TV correctly.

Step 1: Choose a disc type

Step 2:

Insert a blank

disc

Step 3:

Select the

There are several types of recordable

DVD discs to choose from. Choose a

recordable DVD disc type based on

your playing/recording/editing require-

ments. See “DVD disc type” below.

This unit can record on the follow-

ing type of discs only.

Recording speed

Turn on the unit

Open the disc tray

PQRS

TUV

WXYZ

CLEAR

SPACE

Close the disc tray

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Remote Control

(or)

OPEN/

POWER

* This unit cannot record on the fol-

lowing discs.

.@/:

ABC

DEF

VCR Plus

RETURN

SETUP

• DVD-R GeneralVer 2.0 / 8x

• DVD-RWVer 1.2 / 2-4x CPRM com-

patible

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

For example, when you want to

record repeatedly on the same disc,

or when you want to edit the disc

after recording, select the

rewritable DVD-RW type disc.

When you want to save recordings

without any alteration, a non-

rewritable DVD-R can be your

choice.

REV

FWD

PAUSE

OPEN/

POWER

.@/:

ABC

DEF

VCR Plus

SP 2:01 Rem.

This operation may

take a while to be

recognized.

DVD disc types

Format the disc

Insert the disc in the unit.

Then format the disc from

SETUP menu.Video format

(Video mode) orVideo

recording format (VR mode)

will be available depending on

the disc type inserted.

This is necessary to pre-

pare the disc for record-

ing. Details are on pages

30-32.

*When you format, the entire

contents on that disc will be

erased.

Getting started

Easy DVD recording (Cont’d)

Step 4:

Select the

desired channel

Step 5:

Record to DVD

discs

Step 6:

Stop the Record

REC

MONITOR

REC

SPEED

REC/OTR

MENU/LIST

TOP MENU

SKIP

OPEN/

POWER

STOP

PLAY

REV

FWD

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PAUSE

RETURN

SETUP

PQRS

CLEAR

TUV

REC

MONITOR

REC

SPEED

SPACE

REC/OTR

SKIP

REPEAT CM SKIP

ZOOM DISPLAY

58%

Writing to Disc

STOP

PLAY

SKIP

STOP

REV

PLAY

FWD

CH 1

This operation may take

a while to be completed.

Hint 1: Play the recorded contents

Start Rec.

Stop/Start

Stop Rec.

You can select the title you want to play from a displayed menu and

immediately start to play. Recorded contents are very accessible on

a disc, the procedure is really simple as you choose a title on a

chapter from the menu screen.

Title 1

Title 2

What are titles and chapters?

The contents of DVD disc are generally divided into titles.Titles may

be further subdivided into chapters.

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2

Hint 2: Edit the recorded disc

You will find editing discs very easy.This unit offers convenient edit functions, which are possible only with

DVD-R/RW discs.

You can edit the following from a title list.

• Putting names on titles

• Setting pictures for thumbnails (VR mode)

• Setting/clearing chapter markers

• Deleting parts of titles or scenes (VR mode)

Title Delete :This deletes an entire scene permanently from the disc.

Scene Delete :This allows a user to edit within a specific scene (ex. commercials).

Original and Playlist (VR mode)

You can edit the recordings in Playlist without changing the original recordings. A Playlist does not take up

much disc space.

What “Original” or “Playlist” is for?

Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version.

• Original content refers to what’s actually recorded on the disc.

• Playlist content refers to the edited version of the disc; how the Original content is to be played.

Finalizing a Disc

• This will allow a disc that is recorded on our unit to be played back on a different DVD player- without

finalization it will not be playable on another player.

•

After finalizing a disc if the recording was in video mode, you can not edit any information that is on that disc.

• If you have recorded inVR mode on DVD-RW disc then editing is still permitted after finalizing.

Getting started

Channel setting

All channels are stored in the

DVD recorder when purchased.

We recommend that you pro-

gram available channels in your

area using “Auto Preset” in the

Channel Preset of the SETUP

menu.

OPEN/

POWER

Select “SETUP” using { /

buttons, then press ENTER

button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SETUP menu will appear.

SPACE

Setup

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Getting channels auto-

matically

Press POWER button to turn

on the DVD recorder.

RETURN

SETUP

Playback Setting

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Turn theTV on and be sure

to select the input to which

the DVD recorder is connect-

ed.

Select “Channel” using K /

{ / B buttons, then press

ENTER button.

To select a channel

You can select a channel by

directly entering channel using

the Number buttons on the

remote control.

Channel Preset menu will appear.

Setup > Channel Preset

Auto Preset

Manual Preset

Notes for using the

Number buttons:

Guide Channel Setting

TV Audio Select

Stereo

• When selecting cable channels

which are higher than 99,

enter channel numbers as a

three-digit number.(For exam-

ple: 117, press 1,1,7)

•You must precede single-digit

channel numbers with a zero

(For example: 02, 03, 04 and

so on).

•You can select the line input

mode (“L1” or “L2”). To select

“L1” by pressing [0], [0], [1].To

select “L2” by pressing [0], [0],

[2]. Details are on page 41.

Select “Auto Preset” using

L buttons, then press

ENTER button.

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

The DVD recorder will start get-

ting channels available in your

area.

CH 18

Auto Presetting Now

Note

• If the auto presetting is can-

celled during presetting, some

channels not yet preset may

not be received.

Setup Menu

• The selection will depend on

how you receive the TV chan-

nels.

To cancel the auto preset-

ting during scanning:

Press RETURN button or

SETUP button to cancel.

Press SETUP button to exit.

•You can select only the channels

memorized in this unit by using

the CHANNEL buttons.

Getting started

Channel setting (cont’d)

Adding/deleting chan-

nels

Select “Manual Preset” using

The channels you no longer

OPEN/

POWER

K / L buttons, then press

ENTER button.

Manual Preset menu will appear.

receive or seldom watch can be

deleted from the memory.You also

may add channels into memory.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Setup > Channel Preset > Manual Preset

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

CH2

Add

Delete

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

Select the channel number to

add or delete.

Press { button to move to a

SKIP

STOP

PLAY

REV

FWD

Setup Menu

PAUSE

lower channel number.

Press B button to move to a

higher channel number.

Setup > Channel Preset > Manual Preset

Select “SETUP” using { /

buttons, then press ENTER

button.

SETUP menu will appear.

CH18

Add

Delete

Setup

Select “Add” or “Delete”

Playback Setting

using K / L buttons, then

press ENTER button.

The channel number will be

added or deleted from the chan-

nel memory.Then a next channel

number will appear so that you

can continue adding or deleting

channels.

Select “Channel” using K /

{ / B buttons, then press

ENTER button.

Channel Preset menu will appear.

Setup > Channel Preset

Auto Preset

Manual Preset

Press SETUP button to exit.

Guide Channel Setting

TV Audio Select

Stereo

Getting started

Channel setting (cont’d)

Guide channel setting

Channel Line-Up Chart

First, fill in the boxes on this page:

Call letters

(Local TV station)

Guide Channel

(Guide channel number)

TV Channel

(Local channel number)

Write your local channel numbers in “TV Channel”

column, which you can receive in your area by

channel preset.

Write local TV stations corresponding TV Channel

in “Call letters” column, and write guide channel

numbers corresponding call letters in “Guide

Channel” column, consulting your TV guide maga-

zine or the TV listings of your local newspaper.

Now, compare the channel numbers you have writ-

ten in the Guide Channel and TV Channel columns.

You must set all of these channel numbers that

don’t match using the following procedure before

you program the automatic timer recording using

theVCR Plus+ system.

• This setting only needs to be set once, but must

be done again if you have moved to a different

area and channel numbers have been changed.

Setup

OPEN/

POWER

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Playback Setting

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Select “Channel” using K /

{ / B buttons, then press

ENTER button.

RETURN

SETUP

Setup Menu

Channel Preset menu will appear.

REC

SPEED

MONITOR

REC/OTR

Setup > Channel Preset

SKIP

Auto Preset

STOP

PLAY

Manual Preset

Select SETUP using { /

REV

FWD

Guide Channel Setting

PAUSE

buttons, then press ENTER

button.

TV Audio Select

Stereo

SETUP menu will appear.

Getting started

Channel setting (cont’d)

Select “Guide Channel

Press SETUP button to exit

SETUP menu.

OPEN/

POWER

Setting” using K / L buttons,

then press ENTER button.

Guide Channel Setting list will

appear.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SPACE

Setup> Channel Preset> Guide Channel Setting

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Guide Channel :

TV Channel

CH1

CH---

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

SKIP

Assign channel numbers to

the guide channels as neces-

sary.

STOP

PLAY

REV

FWD

PAUSE

Look in your TV guide to see

which channel numbers should be

assigned to which guide channels.

Choose a guide channel num-

ber using K / L buttons, then

press ENTER button.

A cursor will move to a TV chan-

nel.

If the channel you wish to set is

not on the screen, press { /

buttons to change the displayed

page until you reach the correct

page.

Select an external input (L)

or CATV/TV (CH) using { /

B buttons.

Enter aTV channel using K /

L buttons or number but-

tons, then press ENTER but-

ton.

The channel number is assigned.

To continue assigning, repeat the

steps 1-3.

Note

• To erase a TV channel, press

{ button at step 5-3.

Getting started

Selecting theTV stereo or SAP

You can select a sound channel to

output from TV. “Stereo” has

been selected as the default.

Select “TV Audio Select”

OPEN/

POWER

using K / L buttons, then

press ENTER button.

Option window will appear.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

PQRS

CLEAR

TUV

Setup > Channel Preset

SPACE

Auto Preset

Manual Preset

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Guide Channel Setting

TV Audio Select

Stereo

SAP

RETURN

SETUP

Setup Menu

REC

MONITOR

REC

SPEED

REC/OTR

Select “Stereo” or “SAP”

SKIP

using K / L buttons, then

press ENTER button.

STOP

PLAY

REV

FWD

PAUSE

Select “SETUP” using { /

buttons, then press ENTER

button.

Stereo:

Outputs main-audio.

SAP:

SETUP menu will appear.

(Secondary Audio Program)

Outputs Sub-audio.

Setup

Refer to the item in “Glossary” on

page 100 for more information.

Playback Setting

Press SETUP button to exit.

Notes onTV channel audio

• When you record a TV program which has Stereo and Secondary

Audio Programs on a DVD-RW/R, you have to select the TV chan-

nel audio (Stereo or SAP) beforehand. Only the selected channel

audio will be recorded. Refer to the following table to check an

appropriate setting.

Select “Channel” using K /

{ / B buttons, then press

ENTER button.

Channel Preset menu will appear.

Selected

audio

Broadcast

audio

Disc

recording

Audio

output

Setup > Channel Preset

Stereo

SAP

STEREO+SAP STEREO

STEREO

MONO

SAP

Auto Preset

Manual Preset

STEREO

MONO+SAP

MONO

STEREO

MONO

Guide Channel Setting

TV Audio Select

Stereo

STEREO+SAP SAP

STEREO

MONO+SAP

MONO

STEREO

SAP

MONO

STEREO

SAP

MONO

• As can be seen in the above table, if your TV channel audio is set to

SAP and the recorded TV program has Stereo and Secondary Audio

Programs, you can only view the program in the sub-audio.

Getting started

Clock setting

Set the clock before you try the

timer recording. If a Public

Broadcasting Station (PBS) is available

in your area, follow Auto Clock

Setting below. If not, follow Manual

Clock Setting on pages 24-25.

Select “Auto Clock Setting”

using K / L buttons, then

press ENTER button.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Option window will appear.

Auto Clock Setting

Make sure

PQRS

CLEAR

TUV

Setup > Clock

SPACE

• The antenna/Cable TV connec-

tions are correct.

• If this unit is connected to a

Cable Box or Satellite Box, select

the local PBS station on them to

set the clock automatically.

Clock Setting

OFF

Auto Clock Setting

Auto

OMfaf nual

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Daylight Saving Time

RETURN

SETUP

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

REC

MONITOR

REC

SPEED

REC/OTR

• If you do not know your

PBS channel number, select

“Auto” using K / L buttons,

then press ENTER button.

SKIP

STOP

PLAY

REV

FWD

PAUSE

• If you know your PBS chan-

nel number, select “Manual”

using K / L buttons, then

press ENTER button.

Setup Menu

Setup > Clock

Clock Setting

OFF

Set Channel No.

Auto Clock Setting

Auto

CH1

Daylight Saving Time

OMfaf nual

Select “SETUP” using { /

but-

tons, then press ENTER button.

SETUP menu will appear.

Setup

Enter your PBS channel

number using Number or

L buttons, then press

ENTER button.

Playback Setting

Note

Press SETUP button to exit.

• The clock may set itself auto-

matically after you connect the

antenna/cable signal to this

unit and plug in the power

cord. In this case, the current

time will appear on the front

display on the front panel.

• The current time is not dis-

played or the displayed clock

is not correct, set the clock

manually.

Select “Clock” using K / L / { /

buttons, then press ENTER button.

Clock menu will appear.

Press POWER button to turn

off the DVD recorder. This unit

will search for the time only

Setup > Clock

Clock Setting

when the power is off. Leave it off

for several minutes to give this

unit time to set the clock on the

front display of the front panel.

Auto Clock Setting

Auto

Daylight Saving Time

Getting started

Clock setting (cont’d)

Manual Clock Setting

Select “Clock Setting” using

OPEN/

POWER

K / L buttons, then press

ENTER button.

A clock setting window will

appear.

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SPACE

Setup > Clock

Clock Setting

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Auto Clock Setting

Auto

Daylight Saving Time

- - - / - - / - - - - ( - - - )

- - : - -

Setup Menu

RETURN

SETUP

Press ENTER button again.

Default date will appear.

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Select “SETUP” using { /

buttons, then press ENTER

button.

STOP

PLAY

REV

FWD

PAUSE

Enter the date (month / day /

year) using K / L buttons.

Press { / B button to move the

cursor.

SETUP menu will appear.

Setup

Setup > Clock

Clock Setting

Auto Clock Setting

Auto

Daylight Saving Time

JAN / 12 / 2004 (MON)

12 : 00AM

Playback Setting

Select “Clock” using K / L /

{ / B buttons, then press

ENTER button.

Enter the time (hour /

minute) using K / L buttons,

then press { / B buttons.

A cursor will move on AM or PM.

Clock menu will appear.

Setup > Clock

Clock Setting

Auto Clock Setting

Auto

Setup > Clock

Clock Setting

Daylight Saving Time

Auto Clock Setting

Auto

Daylight Saving Time

JAN / 12 / 2004 (MON)

09 : 24 AM

Note

•

Your clock setting will be lost if

either there is a power failure

or this unit has been unplugged

for more than 30 seconds

when you set the clock manu-

ally.

Getting started

Clock setting (cont’d)

Press SETUP button to exit.

Although seconds are not displayed,

they begin counting from zero.

Press K / L buttons to select

AM or PM, then press ENTER

button.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Clock menu will appear, then the

settings will be activated.

PQRS

CLEAR

TUV

SPACE

Setup > Clock

Clock Setting

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Auto Clock Setting

Auto

Daylight Saving Time

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

When “Auto Clock Setting” is selected to “Auto” or

“Manual”, change it to “OFF” as following steps.

Repeat steps (1) to (3) in “Manual Clock Setting”.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Select “Auto Clock Setting”

Select “OFF” using K /

buttons, then press ENTER

button.

using K / L buttons, then

press ENTER button.

Option window will appear.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Setup > Clock

Clock Setting

OFF

Press SETUP button to exit.

Auto Clock Setting

Auto

Daylight Saving Time

OMfaf nual

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Getting started

Clock setting (cont’d)

Setting the daylight sav-

ing time

When Daylight Saving Time is

ON, the DVD recorder clock will

automatically move forward one

hour on the first Sunday in April

and move back one hour on the

last Sunday in October.

Select “Daylight Saving

OPEN/

POWER

Time” using K / L buttons,

then press ENTER button.

Daylight Saving Time options will

appear.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SPACE

Setup > Clock

Clock Setting

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Auto Clock Setting

Auto

OFF

Daylight Saving Time

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Select “ON” or “OFF” using

K / L buttons, then press

ENTER button.

Choose “ON” when currently

observing the daylight saving time.

STOP

PLAY

REV

FWD

PAUSE

Setup Menu

Select “SETUP” using { /

Press SETUP button to exit.

buttons, then press ENTER

button.

SETUP menu will appear.

Setup

Playback Setting

Select “Clock” using K / L /

{ / B buttons, then press

ENTER button.

Clock menu will appear.

Setup > Clock

Clock Setting

Auto Clock Setting

Auto

Daylight Saving Time

Getting started

Selecting theTV aspect ratio

You can select the TV aspect ratio

Playback menu will appear.

to match the formats of what you

are playing with the DVD

recorder and your TV screen (4:3

standard or 16:9 widescreen TV).

“4:3 Letter Box” has been select-

ed as the default.

Setup > Playback

TV Aspect

4:3 Letter Box

All

OPEN/

POWER

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Dynamic Range Control

Fast Forward with Audio

PQRS

CLEAR

TUV

OFF

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

Select “TV Aspect” using K /

L buttons, then press ENTER

button.

RETURN

SETUP

Option window will appear.

REC

MONITOR

REC

SPEED

REC/OTR

Setup > Playback

TV Aspect

16:9 Wide

4:3 Letter Box

SKIP

Parental Lock

4:3 Pan & Scan

16:9 Wide

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

STOP

PLAY

Original

OFF

REV

FWD

Setup Menu

PAUSE

Dynamic Range Control

Fast Forward with Audio

OFF

Refer to the Note on this

page.

Select “SETUP” using { /

buttons, then press ENTER

button.

SETUP menu will appear.

Select a desired option using

K / L buttons, then press

ENTER button.

Setup

Press SETUP button to exit.

Playback Setting

Select “Playback” using K /

{ / B buttons, then press

ENTER button.

Note

If you have a standardTV:

Select “4:3 Letter Box”, so that

black bars appear on the top

and bottom of the screen.

Select “4:3 Pan & Scan” for a

full height picture with both

sides trimmed.

If you have a widescreenTV:

Select “16:9 Wide”.

Recording

Information on DVD recording

Information

Recording speed

You can select a recording speed among 6 options,

and the recording time will depend on the record-

ing speed you select as follows.

This DVD recorder can record to DVD-R and

DVD-RW discs.When recording, you will need to

select a recording format betweenVideo mode and

VR mode depending on the disc format.The disc

format for DVD-R is always “Video format,” so a

recording format will be “Video mode”.

On the other hand, when recording to DVD-RW, a

recording format will be “Video mode” or “VR

mode” because a disc format is available between

“Video Recording format” and “Video format” for

DVD-RW.

Recording Recording

Video/Sound Quality

speed

time *

XP (1H)

60 min

SP (2H)

LP (4H)

EP (6H)

120 min

240 min

360 min

Logo

Attributes

12cm, single-sided, single layer disc

Approx. max. recording time (SEP mode):

600 minutes (4.7GB)

SLP (8H) 480 min

DVD-RW

SEP (10H) 600 min

12cm, single-sided, single layer disc

Approx. max. recording time (SEP mode):

600 minutes (4.7GB)

*This table is designed for a new single-sided 12cm

disc as the standard.The recording time are esti-

mates and actual recording time may differ.

*The audio and video quality is getting poorer as

the Recording time becomes longer.

DVD-R

*This unit cannot record on the following discs.

• DVD-R GeneralVer 2.0/8x

• DVD-RWVer 1.2/2-4x CPRM compatible

Restrictions on recording

AboutVideo mode andVR (Video Recording)

mode

You cannot record copy-protected video using this

DVD recorder. Copy-protected video includes

DVD-Video discs and some satellite broadcasts.

If copy-protected material is encountered during a

recording, recording will pause or stop automatically

and an error message will be displayed on-screen.

Video that is “copy-once only” can only be recorded

using a DVD-RW disc inVR mode with CPRM (see

below).

Video mode is the same recording format as DVD-

Video discs purchased locally, so that you can play in

most DVD players.To play in other DVD players,

you will need to finalize (see page 42). Unless final-

ized, you can play, record additionally or edit discs

recorded inVideo mode with this unit.

VR (Video Recording) mode is a basic recording

format for DVD-RW.You can record and edit

repeatedly.

When recording a TV broadcast or through an

external input, you can display copy control informa-

tion on screen.

DVD players with

are capable of playing

DVD-RW recorded inVR mode.

What is “CPRM”?

CPRM is a copy protection system with scram-

ble system regarding the recording of “copy

once” broadcast programs. CPRM stands for

Content Protection for Recordable Media.

This DVD recorder is CPRM compatible, which

means that you can record copy-once broad-

cast programs, but you cannot then make a

copy of those recordings. CPRM recordings can

only be made on DVD-RW discs formatted in

VR mode, and CPRM recordings can only be

played on players that are specifically compati-

ble with CPRM.

Disc type Disc format Functions

Video mode

Video

Playing, limited recording,

limited editing

DVD-RW

VR mode

Playing, recording,

Original/Playlist editing

DVD-RW

DVD-R

DVD-RW

Video mode

Playing, limited recording,

limited editing

DVD-R

Recording

Information on DVD recording (cont’d)

Information on copy control

Making discs playable in other DVD

player (Finalize)

Some satellite broadcasts include copy-protected

information. For recording these, refer to the fol-

lowing.

After recording, you must finalize a disc in order to

play on any other unit. (Refer to page 39.)

Copy-

prohibited

Disc type / format

Copy-free Copy-once

ver.1.1

Playable

DVD-RW

ver.1.1 CPRM compatible

ver.1.1

Video

DVD-RW

DVD recorder

DVD player

ver.1.1 CPRM compatible

Not Playable

ver.2.0

DVD-R

Recordable

Not Recordable

After finalizing:

• Once DVD-R/RW (Video mode) is finalized, you

cannot record additionally or edit.

• Even if DVD-RW (VR mode) is finalized, you can

record additionally to or edit.

• When DVD-R/RW (Video mode) is finalized, title

menu will be created automatically.

Note

• The audio and video quality gets poorer as the

Recording time becomes longer.

• This recorder cannot record CD-R or CD-

RW discs.

• DVD-R/RW and CD-R/RW discs recorded on a

personal computer or a DVD or CD recorder

may not play if the disc is damaged or dirty, or if

there is dirt of condensation on the player’s lens.

• If you record a disc using a personal computer,

even if it is recorded in a compatible format,

there are cases in which it may not play because

of the settings of the application software used

to create the disc. (Check with the software pub-

lisher for more detailed information.)

To play in other DVD players, finalize discs recorded

on this DVD recorder with the following condition.

Disc type

Mode

DVD-R

ver.2.0

Video mode

DVD-RW

Video mode

VR mode

ver.1.1

ver.1.1 CPRM compatible

• Discs recorded inVideo mode on this DVD

recorder cannot record additionally using other

DVD recorders.

Recording

Formatting a disc

Settings for the recording format to a blank disc

Video

DVD-RW

When inserting a blank disc, the

DVD recorder starts to initialize

the blank disc.

After that, you can record to the

disc with the recording format

selected in SETUP menu.

OPEN/

POWER

Select “Recording” using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Recording menu will appear.

SPACE

You are allowed to set a specified

time for chapter marks.

Setup > Recording

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

DVD-RW Recording Format

Auto Chapter

Video mode

10 minutes

Timer Programming

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

Select “DVD-RW Recording

REV

FWD

Format” using K / L buttons,

then press ENTER button.

Option window will appear.

PAUSE

Setup > Recording

Setup Menu

Video mode

VR mode

DVD-RW Recording Format

Auto Chapter

VR mode

10 minutes

Timer Programming

Video mode

DVD Player Compatibility mode.

VR mode

Select “SETUP” using { /

Editing possibility mode.

buttons, then press ENTER

button.

SETUP menu will appear.

Note

Video mode has been selected as

the default.

• The recording format setting

is effective only for DVD-RW

discs.You cannot change the

recording format on a DVD-R

disc. DVD-R discs will always

be inVideo mode.

Setup

Select “Video mode” or “VR

mode” using K / L buttons,

then press ENTER button.

The recording mode will be set.

•

You cannot mix two for-

mats on one DVD-RW

disc.When you load a disc

once recorded before, the

recording format cannot be

changed even if you change

it in SETUP menu.

Playback Setting

• When inserting a blank

DVD+R or DVD+RW disc,

the error message ("Disc

Error") will appear.This DVD

recorder is not compatible

with a DVD+R/RW disc.

• PLAYLIST will be created

automatically when recording

on DVD-RW inVR mode.

Recording

Formatting a disc (cont’d)

OPEN/

POWER

Select “Auto Chapter” using

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

K / L buttons, then press

ENTER button.

Option window will appear.

PQRS

CLEAR

TUV

SPACE

Setup > Recording

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

DVD-RW Recording Format

Auto Chapter

VR mode

OFF

5 minutes

10 minutes

15 minutes

30 minutes

60 minutes

Timer Programming

RETURN

SETUP

“10 minutes” has been selected as

the default.

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Select a desired time option

using K / L buttons, then

press ENTER button.

Chapter marks will be put as you

specified.

Press SETUP button to exit

SETUP menu.

Note

• The time for chapter marks is

not accurate inVideo mode.

Recording

Formatting a disc (cont’d)

Reformatting a disc

Video

DVD-RW

If you are using a DVD-RW disc,

by default it will beVideo mode.

You can change this toVR mode

from SETUP menu.

OPEN/

POWER

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Option window will appear.

SPACE

Disc

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

Edit

Format

Finalize

Disc Protect OFF ON

Yes

Are you sure?

Yes

RETURN

SETUP

*VR mode only

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

Setup Menu

REV

FWD

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

PAUSE

Formatting will start.

Select “DISC” using { /

buttons, then press ENTER

button.

DISC menu will appear.

Disc

58%

Edit

Formatting

Format

Finalize

Disc Protect OFF ON

Formatting is complete.

100% will be indicated.

*VR mode only

Select “Format” using K /

buttons, then press ENTER

button.

100%

Formatting

Option window will appear.

Disc

This operation may take a

while to be completed.

Edit

Note

Format

Finalize

• When you reformat the disc,

the contents of the disc will

be erased.

Disc Protect OFF ON

Yes

• If you want to cancel format

at step 5, select "No".

*VR mode only

Recording

Basic recording

Video

DVD-RW

DVD-R

Follow the steps below to record

TV programs.

OPEN/

POWER

Select a desired channel to

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

record using CH K / L but-

tons or number buttons.

PQRS

CLEAR

TUV

Turn on the DVD recorder

and load a recordable disc.

Make sure that the TV input is set

on the DVD recorder.

SPACE

CH 1

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

This operation may take a

while to be recognized.

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

Select a recording speed

using REC SPEED button.

SKIP

Press REC/OTR button to

start recording.

STOP

PLAY

REV

FWD

REC mark will be displayed for 5

seconds.

PAUSE

SP 2:01 Rem.

Refer to “Recording speed” on

page 28.

To pause the recording, press

PAUSE F button. Press REC/OTR

button to restart the recording.

Note

Make sure that the recording

format is set to the desired

mode.

• Recording starts immediately

and continues until the disc

becomes full or you stop

recording.

• When the clock setting has

not been made, the space for

a date and time of title names

in the original or playlist will

be blank.

Refer to “Formatting a disc” on

pages 30-32.

Press STOP C button to stop

the recording.

When a DVD-RW disc is

loaded:

This operation may take a

while to be completed.

You can chooseVideo mode or

VR mode from SETUP menu.

“Video mode” has been selected

as the default. Refer to “Settings

for the recording format to a

blank disc” on pages 30-32.

•

You cannot mix two for-

mats on one DVD-RW disc.

When you load a disc once

recorded before, the

recording format cannot be

changed even if you change

it in SETUP menu.

• You cannot change the

recording speed during the

REC pause mode.

When a DVD-R disc is loaded:

DVD-R discs will always be in

Video mode.

• You can change a channel

during the REC pause mode.

Recording

Basic recording (cont’d)

Checking the recording picture quality

Video

DVD-RW

DVD-R

You can confirm the recording pic-

ture quality with the recording

speed you have selected before

attempting to record to a DVD disc.

OPEN/

POWER

Press REC MONITOR button

again to exit.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

While the DVD recorder is in

STOP or REC with a DVD

disc to record inserted, press

REC MONITOR button.

The TV program will be on the

screen in the recording picture

quality with the recording speed

you have selected.

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

CH 18

Rec Monitor

If you want to change the

recording speed, press REC

SPEED button repeatedly.

The recording speed will be

changed as you press the button

as shown. Refer to “Recording

speed” on page 28.

• You cannot change the record-

ing speed during recording.

SEP

SLP

Note

• You cannot check the record-

ing sound with the Rec moni-

tor function.

Recording

One-touch timer recording

Video

DVD-RW

DVD-R

This is a simple way to set the

recording time in blocks of 30

minutes. Check that the disc you

are recording onto has enough

space for the time you set.

When the recording finishes the

recorder automatically goes into

standby.

OPEN/

POWER

Select a desired channel to

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

record using CH K / L but-

tons or number buttons.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press REC/OTR button on

the remote control or REC

button on the front panel,

then press REC/OTR or REC

button repeatedly until a

desired recording time (30

minutes to 4 hours) appears

on theTV screen.

Turn on the DVD recorder

and load a recordable disc.

Make sure that the TV input is set

on the DVD recorder.

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Recording will start.

This operation may take a

while to be recognized.

STOP

PLAY

REV

FWD

PAUSE

Select a recording speed

using REC SPEED button.

Refer to "Recording speed" on

page 28.

0:30

(Normal Recording) 1:00

Make sure that the recording

format is set to the desired

mode.

4:00

3:30

When the DVD recorder reaches

the specified time, it will be

turned off automatically.

Refer to "Formatting a disc" on

pages 30-32.

When a DVD-RW disc is

loaded:

To cancel the one-touch timer

recording within the specified

time, press STOP C button.

You can chooseVideo mode or

VR mode from SETUP menu.

"Video mode" has been selected

as the default. Refer to pages 30-

31 "Settings for the recording for-

mat to a blank disc."

Note

This operation may take a

while to be completed.

• The remaining recording time

will appear on the display

panel during an OTR. Press

DISPLAY button to see it on

the TV screen.

• You cannot pause an OTR.

The DVD recorder will be

turned off automatically under

the conditions following.

• No space remained on the

disc.

When a DVD-R disc is loaded:

DVD-R discs will always be in

Video mode.

• When a power failure occurs.

Recording

Timer recording

Video

DVD-RW

DVD-R

You can choose the timer

You can program the unit to

record up to 8 programs, up to a

year in advance. Daily or weekly

program recordings are also avail-

able.

• Be sure to set the clock before

making a timer programming.

• Insert a recordable disc.

programming menu by press-

ingVCR Plus+ button twice. In

this case, continue with step 5.

Select “Timer Programming”

using K / L buttons, then

press ENTER button.

Timer Programming list will

appear.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Setup > Recording > Timer Programming

Date

1. - - -

- - -

Start

End

Speed

PQRS

CLEAR

TUV

3. - - -

SPACE

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Select the program which is

not set up using K / L but-

tons, then press ENTER but-

ton.

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Setup Menu

STOP

PLAY

Enter the date using K /

REV

FWD

buttons, then press B button.

PAUSE

Setup > Recording > Timer Programming

Date

Start

End

Speed

1. JAN / 01 - - : - -AM - - : - -AM CH8

Select “SETUP” using { /

buttons, then press ENTER

button.

2. - - -

3. - - -

4. - - -

e.g. January 1st

SETUP menu will appear.

JAN/01

When pressing L button at the

current date, timer recording

mode will change as follows.

Setup

Daily

MON-SAT

MON-FRI

SAT

Playback Setting

FRI

Note

• If you have not set the

clock yet:

SUN

Select “Recording” using K /

L / { / B buttons, then press

ENTER button.

A clock setting window will

appear after step 4. Continue

with the step 4 in “Auto

Clock Setting” on page 23 or

“Manual Clock Setting” on

page 24 before making a

timer programming.

• Press { or B buttons to

move the cursor to the left

and the right in the timer

programming menu.

DEC/31

Recording menu will appear.

Setup > Recording

Enter the time to start and

to end using K / L buttons,

then press B button.

DVD-RW Recording Format

Auto Chapter

Video mode

10 minutes

Timer Programming

Setup > Recording > Timer Programming

Date

Start

End

Speed

1. JAN/12 10 :00PM - - : - -AM CH8

2. - - -

3. - - -

Recording

Timer recording (cont’d)

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Select the channel number to

record using K / L buttons,

then press B button.

Press ENTER button when all

information required is

entered. Your program setting

will be stored.

PQRS

CLEAR

TUV

SPACE

Setup > Recording > Timer Programming

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

• To set another program, repeat

steps 5 to 10.

• To exit, press SETUP button.

Date

Start

End

Speed

1. JAN/12 10:00PM

2. - - -

10:30PM CH8

To record from external input, L1

or L2.

RETURN

SETUP

Press POWER button to turn

off.

indicator will appear on

REC

MONITOR

REC

SPEED

REC/OTR

Select a recording speed

using K / L buttons.

the front display.

SKIP

Setup > Recording > Timer Programming

Date

Start

End

10:30PM CH8

Speed

Note

1. JAN/12 10:00PM

2. - - -

• After step 11, the DVD

recorder will be turned on

automatically 2 minutes in

advance of the recording time

to start and waits to start.

Then the recording will start

at the recording time you set.

Refer to “Recording speed” on

page 28.

Checking, canceling, or correcting the timer programming

information

OPEN/

POWER

Press POWER button so that

To clear the timer programming,

select your desired program

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

indicator disappears from

the front display.

using K / L buttons.Then,

CLEAR button.

PQRS

CLEAR

TUV

SPACE

To correct the timer program-

ming, select your desired pro-

gram using K / L buttons.Then,

press ENTER button. Next, cor-

rect the timer programming by using

PressVCR Plus+ button twice.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Timer Programming list will appear.

Setup > Recording > Timer Programming

Date

Start

End

10:30PM CH8

Speed

press K/L/{/B buttons.

Finally, press ENTER button again.

1. JAN/12 10:00PM

2. - - -

RETURN

SETUP

PressVCR Plus+ button to exit.

Check the information on the

list you will need.

Note

• PressVCR Plus+ button to

check the timer programming

in process.

Press POWER button to return

to the timer standby mode.

When the timer recording is

proceeding, that program will

be highlighted with red. In this

case, you cannot select any

other program.

To stop the timer recording in process

Press STOP C button on the front panel of the main unit.

STOP C button on the remote control is not effective.

Recording

Timer recording (cont’d)

Hints for timer recording

•

If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

If a disc is not on the tray, the indicator flashes and timer recording cannot be performed. Please insert a recordable disc.

indicator flashes.To play or eject the recorded disc, press POWER

button first, and then press PLAY B or OPEN/CLOSE A button.

• When all the timer recording is completed, the

•

During timer recording or timer standby (

indicator is on the front display), any operations on the unit will not be

available.To make these operations available, cancel the timer recording or timer standby first (

indicator disappears).

• To cancel the timer standby mode, press POWER button.

• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc

reaches at the end during the recording, the DVD recorder turns itself off.

• When the programmed Start and End time are earlier than the current time, the recording will be set on the same

date in the next year.

• If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on

for recording standby right after you turn the power off.

The priority of overlapped settings

This unit records the programs according to priority if the timer programmings are overlapped.The timer programming

set previously has priority.

A timer recording of lower priority will be canceled, start from the middle or stop on the way.

Check the overlapped timer programmings and change the priority if necessary.

A programming set previously has priority

When the starting time is same:

A program set previously (PROG.A) has priority.

When some programming have been made at the end

time of the programming currently being recorded:

A program set previously (PROG. B) has priority.

ex. 2

ex.1

PROG.A

PROG. B

PROG. C

PROG.A

PROG. B

Actual

recording

Actual

recording

PROG.A

PROG. B

PROG.A

PROG. B

The first 20-90 seconds will be cut off.

When the recording time is partially overlapped:

PROG.A will start after PROG. B is complete to be recorded.

When the recording time is entirely overlapped:

PROG.A will not be recorded.

PROG.A

PROG. B

Actual

recording

Actual

recording

PROG. B

PROG.A

PROG. B

The first 20-90 seconds will be cut off.

Note

• When the recording time

of two programs are

Example:

When the end time of the programming currently

being recorded and the starting time of the one to be recorded

sequentially are same:

overlapped, or the End

time of a program and the

Start time of another is

the same, the first 20-90

seconds of the subsequent

program will be cut off.

PROG.A

PROG. B

Actual

PROG.A

PROG. B

recording

The first 20-90 seconds will be cut off.

Recording

Timer recording usingVCR Plus+ system

Video

DVD-RW

appear.

DVD-R

OPEN/

TheVCR Plus+ system lets you

set timer recordings very simply.

Just enter the PlusCode number

listed in the TV program guide.

The date, time, and channel for

the TV program to record will set

automatically.

Before setting timer recording

usingVCR Plus+ system, read

“Guide channel setting” on pages

20-21.

POWER

When the Guide channel has

not been assigned:

The CH area has been selected,

then enter the channel number to

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

record using K / L buttons

SPACE

Setup > Recording > Timer Programming

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Date

Start

End

10:30PM

Speed

1. JAN/12 10:00PM

2. - - -

3. - - -

4. - - -

5. - - -

6. - - -

7. - - -

RETURN

SETUP

8. - - -

REC

MONITOR

REC

SPEED

REC/OTR

In stop mode, pressVCR

Plus+ button.

When the Guide channel has

been assigned:

The programming you made with

VCR Plus+ system is hilighted to

check.

SKIP

VCR Plus+ setting menu will

appear.

STOP

PLAY

REV

FWD

PAUSE

Screen:

VCR Plus+

Setup > Recording > Timer Programming

Date

Start

End

10:30PM CH8

Speed

1. JAN/12 10:00PM

2. - - -

Please enter a Plus Code No.

3. - - -

4. - - -

5. - - -

6. - - -

7. - - -

8. - - -

Note:

• If you want to change the set-

ting, use K / L / { / B but-

tons.

Note

When eight timer recordings have

been scheduled, the Timer

Programming list will appear

instead.

• Press { button to erase the

latest number entered incor-

rectly at step 2.

• Press CLEAR button to erase

all numbers entered incor-

rectly at step 2.

• If you enter an incorrect

PlusCode number at step 2

or the programming is not

available, the error message

“Code Error!” will appear.

Enter the correct PlusCode

Press ENTER button after

you entered or confirm the

information.

Enter the PlusCode number

correctly using number but-

tons.

YourVCR Plus+ program setting

will be stored.

VCR Plus+

number.

Remember:

PressVCR Plus+ button to exit.

Please enter a Plus Code No.

1 2 3 4 -

If your cable box or satellite

box is connected as in

“Connection B” on page 14,

set your cable box or satellite

box to the channel you want

to record; leave your cable

box or satellite box on for

the timer recording.

Press POWER button to

return to the timer standby

mode.

Press ENTER button.

The Timer Programming list will

Recording

Settings for an external source

Connection to an external source

Video

DVD-RW

DVD-R

Connect the external source properly to the DVD recorder by using input jacks either LINE2 (Front) or

LINE1 (Rear).

Use commercially available S-Video orVideo cable and an Audio cable for this connection.

Another source

OUTPUT

VIDEO AUDIO

OUTPUT

(VCR camcorder etc.)

S-VIDEO

AUDIO VIDEO

S -VIDEO

S-Video

Video

Audio

cable

Audio

cable

Video S-Video

cable cable

cable

S-VIDEO

VIDEO

AUDIO

INPUT

(L1) VIDEO

AUDIO

S-VIDEO

To LINE 2 IN

To LINE 1 IN

Front of DVD recorder

Rear of DVD recorder

STOP

REV

PLAY

FWD

CHANNEL

OPEN/CLOSE

POWER

OUTPUT

AUDIO

VIDEO

S-VIDEO

DIGITAL AUDIO OUTPUT

PCM BITSTREAM

PB/CB

PR/CR

S-VIDEO

VIDEO

AUDIO

OUT

REC

REC SPEED

INPUT

(L1) VIDEO

TV ANTENNA

COMPONENT

VIDEO OUTPUT

COAXIAL

AUDIO

S-VIDEO

1. Press SETUP button to display SETUP/DISC 1. Press SETUP button to display SETUP/DISC

menu.

2. Select “SETUP” using { / B buttons, then

press ENTER button.

2. Select “SETUP” using { / B buttons, then

press ENTER button.

3. Select “SelectVideo” using K / L / { / B but-

tons, then press ENTER button.

Setup > Select Video

L1 (Rear)

L2 (Front)

L1 (Rear)

L2 (Front)

Video In

4. Select “L2 (Front)” using K / L buttons, then

press ENTER button.

4. Select “L1 (Rear)”using K / L buttons, then

press ENTER button.

Setup > Select Video

L1 (Rear)

L2 (Front)

L1 (Rear)

L2 (Front)

Video In

S-Video In

Video In

S-Video In

5. Select the input jack type to connect using

K / L buttons, then press ENTER button.

If you want to use S-VIDEO input, select “S-Video

In”.

K / L buttons, then press ENTER button.

If you want to use S-VIDEO INPUT, select “S-Video

In”.

If you want to useVIDEO input (Composite), select

“Video In”.

If you want to useVIDEO INPUT (Composite),

select “Video In”.

Setup > Select Video

L1 (Rear)

L2 (Front)

L1 (Rear)

L2 (Front)

Video In

S-Video In

Video In

S-Video In

Recording

Settings for an external source (cont’d)

Recording from an external source

Video

DVD-RW

DVD-R

Before recording from an external source, see the instructions for the connection on page 40.

1. Turn theTV and the DVD recorder on, and be sure to select

OPEN/

POWER

the input of theTV to which the DVD recorder is connected.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

2. Press OPEN/CLOSE A button to open the disc tray, then

place the disc to record properly.

PQRS

CLEAR

TUV

SPACE

This operation may take a while to be recognized.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

3. Select the input of the DVD recorder which the external

equipment is connected. (L2 or L1)

•To use the input jacks on the back of this unit, select “L1” position by

pressing [0], [0], [1] on the remote control or the CH L / K buttons.

•To use the input jacks on the front of this unit, select “L2” position by

pressing [0], [0], [2] on the remote control or the CH L / K buttons.

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

4. Select a recording speed using REC SPEED button. Refer to

SKIP

“Recording speed” on page 28.

STOP

PLAY

REV

FWD

PAUSE

SEP

SLP

5. Press REC button on the DVD recorder to start recording.

6. Press Play button on the external source to record from.

7. Press STOP C button on the DVD recorder to stop record-

ing.

This operation may take a while to be completed.

Recording

Finalizing the discs

Video

DVD-R

DVD-RW

CLEAR

SPACE

You will need to finalize discs

recorded inVideo mode to play in

other DVD players.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Finalizing may take several minutes

up to an hour. (A disc recorded in

Video mode can take up to15

minutes.A disc recorded inVR

mode can take up to 60 minutes.)

A shorter recording period on the

disc will require a longer time

period for finalization. Do not

unplug the power cord during

finalization.

Finalizing will start.

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

REV

FWD

58%

PAUSE

Finalizing

Details are on pages 28-29.

To cancel finalizing, press STOP

button.

Note

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

•

Finalizing discs inVideo mode

automatically creates title menus.

• Once you have finalized a disc

recorded inVideo mode, you

cannot edit or record any-

thing else on that disc.

Do you want to cancel?

Yes

58%

Discs recorded inVR mode

can still be recorded and edit-

ed on this recorder even

after finalized.

• When you insert a DVD-RW

disc finalized with this DVD

recorder,“Undo Finalize” will

appear instead of “Finalize”.

Finalizing

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Finalizing is cancelled, then the

DVD recorder will be in stop

mode.

Setup Menu

Select “DISC” using { /

Disc

buttons, then press ENTER

button.

Edit

Finalizing is complete.

Format

DISC menu will appear.

Undo Finalize

To release the finalizing for

the disc, select “Undo

Finalize” at step 3.

Disc

Edit

Format

Finalize

• If

appear when pressing

Disc Protect OFF ON

STOP button at step 4, you

cannot cancel finalizing

because the finalizing has

been in certain progress.

• When selecting “No” at step

4 and press ENTER or

RETURN button, finalizing will

be continued.

*VR mode only

100%

Finalizing

Select “Finalize” using K /

buttons, then press ENTER

button.

This operation may take a

while to be completed.

Option window will appear.

• You cannot cancel finalizing

the DVD-R disc once it has

started.

Disc

Edit

Format

Finalize

*DO NOT power off during

finalizing, this will result in

malfunction.

Disc Protect OFF ON

Yes

*VR mode only

Recording

Setting a disc to protect

DVD-RW

To prevent accidental recording,

editing or erasing the titles, you

can protect them from DISC

menu.

OPEN/

Select “Disc Protect OFF ➔

POWER

ON” using K / L buttons,

then press ENTER button.

Option window will appear.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SPACE

Disc

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

Edit

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Format

Finalize

Disc Protect OFF ON

Yes

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

STOP

PLAY

Setup Menu

REV

FWD

PAUSE

A disc will be protected.

Select “DISC” using { /

buttons, then press ENTER

button.

DISC menu will appear.

58%

Note

Writing to Disc

Disc

• The Disc Protect setting is

available only when a disc

withVR mode is inserted.

• You can select only Disc

Protect Menu when a pro-

tected disc is inserted.

Edit

Format

This operation may take a

while to be completed.

Finalize

Disc Protect OFF ON

To cancel the disc protect:

• When you insert a disc pro-

tected with this unit,“Disc

Protect ON → OFF” will

appear instead of “OFF →

ON”.

Disc

Edit

Format

Finalize

Disc Protect ON

Yes

OFF

To release the protect for the

disc, select “Disc Protect ON

→ OFF” at step 3, then select

“Yes”.

Playing discs

Information on DVD play

Before you attempt to play DVD discs, read the following information.

Playable discs

This DVD recorder is compatible to play the follow-

ing discs.

Region codes

This DVD recorder has been designed to play DVD

discs with Region One (1). DVDs must be labeled

for ALL regions or for Region 1 in order to play on

the DVD recorder.You cannot play DVDs that are

labeled for other regions. Look for the symbols

below on your DVDs. If these region symbols do

not appear on your DVD, you cannot play the DVD

in this DVD recorder.

To play a DVD, make sure that it meets the require-

ments for Region Codes and Color Systems as

described below. Discs that have the following logos

will play on the DVD recorder. Other Disc types

are not guaranteed to play.

Disc

Logo

DVDVIDEO

DVD-RW (VIDEO/VR mode)

DVD-R (VIDEO mode)

The number inside the globe refers to region of the

world. Region 1 represents the United States,

Canada, Bermuda, the U.S.Virgin Islands and small

regions near Australia.

A DVD labeled for a specific region can only play on

the DVD recorder with the same region code.

CD-DA (AUDIO CD)

Hint for DVD playback

The contents of DVD disc are generally divided into

titles.Titles may be further subdivided into chapters.

CD-R (CD-DA FORMAT, MP3 files)

CD-RW (CD-DA FORMAT, MP3 files)

Color systems

Start Rec.

Stop/Start

Stop Rec.

Title 1

Title 2

DVDs are recorded in different color systems

throughout the world.The most common color sys-

tems are NTSC (which is used primarily in the

United States and Canada), PAL and SECAM.

This DVD Recorder uses NTSC, so DVDs you play

must be recorded in the NTSC system.You cannot

play DVDs recorded in other color system .

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2

Guide to displays

Press DISPLAY button to call up

the display menu.This menu will

give you the information on the

playing disc. Some operations are

available while disc is playing.

1. Indicates a disc type and a

4. Each icon means:

: Search

format mode.

2. Indicates a recording speed

and possible recording time

left. / Indicates a channel num-

ber.

3. Indicates a title number, chap-

ter number and the time

elapsed of disc play.

: Audio

: Subtitle

: Angle (exceptVR mode)

: Repeat

DVD-RW

00:00:00

: Marker

Video mode

SP 1:25 Rem.

: Noise Reduction

: Zoom

: Spatializer

Playing discs

Basic playback

Playback

VR mode:

Video

DVD-RW

DVD-R

OPEN/

POWER

Original

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

JAN/1 12:00AM

JAN/1 1:00AM

JAN/1 2:00AM

PQRS

CLEAR

TUV

Press POWER button on the

remote control or the front

panel of the DVD recorder.

When you are playing a DVD, turn

the TV on and be sure to select

the input to which the DVD

recorder is connected.

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

JAN/1 3:00AM

JAN/1 4:00AM

MENU / LIST button

Playlist

RETURN

SETUP

JAN/1 12:00AM

JAN/1 1:00AM

JAN/1 2:00AM

REC

SPEED

MONITOR

REC/OTR

Press OPEN/CLOSE A but-

ton to open the disc tray.

The disc tray will open.

SKIP

JAN/1 3:00AM

JAN/1 4:00AM

STOP

PLAY

REV

FWD

PAUSE

Place the disc onto the disc

tray with its label facing up

and make sure to align the

disc to the disc tray guide.

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

Playing will start.

Press STOP C button to stop

play.

Note

disc

tray

guide

• For DVD-R (Video mode)

To eject the disc, press

and DVD-RW (Video mode)

discs which are already final-

ized, a title list will be dis-

played instead of thumbnails.

OPEN/CLOSE A button to open

the disc tray, then remove the disc

before turning off the DVD

recorder.

This operation may take a

while to be recognized.

Title Menu

JAN/1 12:24AM CH96 XP

PressTOP MENU button to

display the title menu.

You can change “Original” or

“Playlist” of VR mode using

MENU / LIST button.

Video mode:

• You can resume play from

where you stopped playing

the disc. (Resume play)

Refer to page 49 for details

about resume play.

Title List

JAN/1 12:00AM

JAN/1 1:00AM

JAN/1 2:00AM

• Some discs may start playing

automatically.

JAN/1 3:00AM

JAN/1 4:00AM

Playing discs

Basic playback (cont’d)

OPEN/

POWER

DVD-V

MP3

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Place the disc onto the disc

tray with its label facing up

and make sure to align the

disc to the disc tray guide.

PQRS

CLEAR

TUV

Press POWER button on the

remote control or the front

panel of the DVD recorder.

When you are playing a DVD, turn

the TV on and be sure to select

the input to which the DVD

recorder is connected.

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press PLAY B button to start

playing.

Playing will start.

RETURN

SETUP

If you are playing a DVD-Video

disc, a menu may appear.

Refer to pages 47-48 for details

about a disc menu.

REC

MONITOR

REC

SPEED

REC/OTR

Press OPEN/CLOSE A but-

ton to open the disc tray.

The disc tray will open.

SKIP

STOP

PLAY

REV

FWD

PAUSE

Note

Press STOP C button to stop

• Some discs may start playing

automatically.

playing.

For MP3 playback

• When selecting a folder, press

PLAY B, ENTER or B button

to go to the lower hierarchy.

• Press s button or RETURN

button to the previous hierarchy.

• Press STOP button to return to

the first to the first item.

OPEN/

POWER

In stop mode, pressTOP

MENU button to call up the

MP3 menu.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

List of MP3 Files

DISC NAME

SPACE

Hints for MP3 files:

• Folders are known as Groups,

files are known as Tracks.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

FOLDER NAME 1

FOLDER NAME 2

FOLDER NAME 3

FOLDER NAME 4

FOLDER NAME 5

FOLDER NAME 6

•

Folders are accompanied by

icon.

FILE NAME 1

FILE NAME 2

1/2

•

MP3 files are accompanied by

icon.

Reproduction will start from the

selected track and go to the

next one in turn.

RETURN

SETUP

• To exit the menu, press TOP

MENU button again.

Note

•

The system can recognize up to 255

groups (or folders) and up to 255 tracks.

The name of group and track can

be displayed in up to 32 charac-

ters. Unrecognizable characters

will be replaced with asterisks.

• The audio source of MP3 files

cannot be recorded as digital

sound by an MD or DAT

deck.

• Files whose extension is

other than “.mp3(MP3)” will

not be listed in the MP3

menu.

• Some unplayable folders or

tracks may be listed in the

MP3 menu due to the record-

ing status.

Press K / L buttons to select a

desired folder (group) or track,

then press ENTER button.

• If there are no files in the folder,

“No Files” will be displayed.

When selecting track:

Playback will start.

This unit recommends the files

recorded under the following cir-

cumstances:

When selecting the folder:

The files in folder will appear.

Press K / L buttons to select the

track you want, then press ENTER

button.

•

Sampling frequency: 44.1kHz or 48kHz.

Constant bit rate: 112kbps - 320kbps.

Playing discs

Basic playback (cont’d)

Playing discs using the disc menu

DVD-V

A DVD disc contains a disc menu

that describes the contents or

allows you to customize the play-

back. For example, the menu may

offer choices for subtitle lan-

guages, special features, or chapter

selection.

Sometimes these are displayed

automatically when you start play-

back, otherwise only appear when

you press MENU/LIST button.

OPEN/

POWER

Select an item using K / L /

{ / B buttons, then press

ENTER button to confirm.

Continue this step to set up all

the features you want or to start

playing the disc from the menu.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

MENU/LIST button:

Displays a DVD disc menu which

varies with the disc and may be

the same as the ‘Title menu.’

RETURN

SETUP

K / L / { / B buttons:

Moves the cursor around screen.

REC

MONITOR

REC

SPEED

REC/OTR

Press MENU/LIST button.

SKIP

The DVD main menu will appear.

STOP

PLAY

Enter button:

REV

FWD

Selects the currently highlighted

menu option.

If the feature is not available,

may appear on the TV screen.

PAUSE

Number buttons:

Selects a numbered menu option

(some discs only). (Press ENTER

button after.)

Press MENU/LIST button to

exit the menu.

Note

• Menus vary among discs.

Refer to the information

accompanying the disc for

details.

Playing discs

Basic playback (cont’d)

Playing discs using the title menu

DVD-V

Some DVDs have a title menu,

which lists the titles available on

them. It helps you to start play at

a specific title.

OPEN/

POWER

Select a title to play using the

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

K / L / { / B buttons, then

press ENTER button.

Play will begin at the title you

selected.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

PressTOP MENU button.

TOP MENU button:

Displays the ‘Title menu’ of a

DVD disc which varies with the

disc.

The title menu will appear.

If the feature is not available,

may appear on the TV screen.

RETURN

SETUP

K / L / { / B buttons:

Moves the cursor around screen.

REC

SPEED

MONITOR

REC/OTR

SKIP

Enter button:

Selects the currently highlighted

menu option.

STOP

PLAY

REV

FWD

PAUSE

Number buttons:

Selects a numbered menu option

(some discs only). (Press ENTER

button after.)

PressTOP MENU button to

exit the title menu.

Note

• The TOP MENU button will

not always be active with all

DVDs.

• Menus vary among discs.

Refer to the information

accompanying the disc for

details.

Playing discs

Special playback

Resume play

Video

DVD-V

DVD-R

DVD-RW

CLEAR

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

MP3

DVD-RW

Press PLAY B button.

You can resume play from where

you stopped playing the disc last.

In a few seconds, play will resume

from the point at which it

stopped last.You can resume play

at the same point even if you turn

off the DVD recorder.

RETURN

SETUP

During play, press STOP

button.

REC

MONITOR

REC

SPEED

REC/OTR

To cancel the resume play and

start playing the disc from the

beginning, press STOP C button

the second time while the play is

stopped.

The resume message will appear.

Screen:

SKIP

STOP

PLAY

REV

FWD

PAUSE

Note

• For MP3 files, playback will

resume from the beginning of

the track at which playback

was stopped.

Resume ON

Fast forward / Fast reverse

Video

DVD-V

DVD-R

MP3

MENU/LIST

TOP MENU

DVD-RW

During play, press FWD D or REV E button.

RETURN

SETUP

Every time you press FWD D or REV E button, approximate speed

will be changed as follows. (For DVD discs, the sound will be output

during playback in fast forward of x2 only if you set “Fast Forward with

Audio” to “ON” for the “Playback” setting in the SETUP menu.)

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

FWD

STOP

PLAY

Normal

speed

REV

FWD

REV

PAUSE

x40

x20

x40

playback

For Audio CDs, approximate speed is fixed at x8 with sound.

For MP3 files, approximate speed is fixed at x16.

To return to the normal play, press PLAY B button.

Note

• Forward/reverse speed will be

indicated with icons as fol-

lows.

Forward (Approx. Speed)

x2:

x20:

x40:

Reverse (Approx. Speed)

x5:

x20:

x40:

Playing discs

Special playback (cont’d)

SkippingTV commercials during play

Video

DVD-RW

e.g. Press CM SKIP button once

DVD-R

You can skip TV commercials by

pressing CM SKIP button, so that

you can enjoy the recorded pro-

grams without interrupting.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

CM Skip

30 sec.

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

During play, press CM SKIP

button.

(forwarding 30 seconds.)

Normal play will start at 30 sec-

onds ahead from the point you

press CM SKIP button.

RETURN

SETUP

Every time you press CM SKIP

button, the searching point will be

extended by 30 seconds ahead.

You can press up to 6 times (180

seconds).

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Playback will restart automatically.

Pause

Video

DVD-RW

DVD-V

DVD-R

OPEN/

POWER

MP3

DVD-RW

Press PLAY B button to

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

resume play.

During play, press PAUSE

button.

PQRS

CLEAR

TUV

SPACE

Play will pause and sound will be

muted.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Playing discs

Special playback (cont’d)

Step by step playback

Video

DVD-V

DVD-R

DVD-RW

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

DVD-RW

Press SKIP G button

repeatedly.

PQRS

CLEAR

TUV

SPACE

The play will advance one frame

(or step) at a time when you

press the SKIP button with the

sound muted.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

During play, press PAUSE

button.

Play will pause and sound will be

muted.

To play step by step back-

ward:

RETURN

SETUP

Press SKIP H button repeatedly.

Every time you press the button,

the play will go backward by one

frame.

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Press PLAY B button to

resume play.

Slow forward / Slow reverse play

Video

DVD-RW

DVD-V

DVD-R

MENU/LIST

TOP MENU

During play, press PAUSE k button, then press FWD D or

REV E button.

RETURN

SETUP

Every time you press FWD D or REV E button, approximate speed

will be changed as follows. (The sound will remain mute.)

REC

MONITOR

REC

SPEED

REC/OTR

FWD

SKIP

STOP

PLAY

REV

Pause

REV

x1/4

x1/8

x1/16

x1/8

x1/2

REV

FWD

PAUSE

To return to the normal play, press PLAY B button.

Note

• Forward/reverse speed will be

indicated with icons as fol-

lows.

Forward (Approx. Speed)

x1/16:

x1/8:

x1/2:

Reverse (Approx. Speed)

x1/16:

x1/8:

x1/4:

Playing discs

Special playback (cont’d)

Zoom

OPEN/

POWER

Video

DVD-RW

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

DVD-V

DVD-R

DVD-RW

Select a desired zoom factor

to zoom using { / B buttons,

then press ENTER button.

The zoom area will be displayed.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

During play, press ZOOM but-

ton.

Zoom menu will appear.

Screen:

DVD-Video

01:23:45

RETURN

SETUP

x1.2

x1.5

x2.0

Note

• When selecting a smaller factor

than the current one, the zoom

area will not be displayed.

• To remove the zoom menu, press

ZOOM button again at step 1.

• To cancel the zoom function,

select x1.0 using { / B buttons,

then press ENTER button.

Select a desired zoom position

There are four options

using K / L / { / B buttons, then

press ENTER button.

The zoom play will start.

(x1.0,x1.2,x1.5 and x2.0), these

are displayed excluding the cur-

rent zoom rate.

Spatializer setting (Virtual surround)

Video

OPEN/

POWER

DVD-V

DVD-R

DVD-RW

DVD-Video

00:00:00

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

DVD-RW

OFF

PQRS

CLEAR

TUV

SPACE

During playback, press

DISPLAY button.

The display menu will appear.

Screen:

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

DVD-Video

01:23:45

RETURN

SETUP

Select a desired option using

K / L buttons, then press

ENTER button.

Your setting will be activated.

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

ON: Outputs the virtual surround

sound.

REV

FWD

PAUSE

OFF: Outputs the original sound.

Select

icon using { /

Note

buttons, then press ENTER

button.

Spatializer menu will appear.

• This feature is not available

for some discs.

•Select “OFF” at step 3 if the

sound is distorted.

Playing discs

Special playback (cont’d)

Marker Setup

Video

DVD-RW

DVD-V

DVD-R

OPEN/

POWER

DVD-RW

Select a desired marker num-

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

This feature allows you to assign

a specific point on a disc to be

called back later.

ber using { / B buttons.

When it reaches the desired

point, press ENTER button.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

During play, press DISPLAY

button.

To return to the marker later,

select the desired marker

The display menu will appear.

Screen:

number using { / B buttons,

then press ENTER button.

RETURN

SETUP

DVD-Video

01:23:45

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Select

icon using { /

buttons, then press ENTER

button.

Marker setup menu will appear.

Screen for DVD:

DVD-Video

01:23:45

Screen for CD:

Note

• To clear a marker, select the

Audio CD

01:23:45

marker number to be cleared,

then press CLEAR button.

• All markers will be erased

when you operate these opera-

tions listed below.

– Opening the disc tray.

– Turning off the power.

– Recording to a recordable

disc.

–

Changing the mode between

Original and Playlist. (VR mode)

• You can mark up to 6 points.

Playing discs

Title/Chapter search

Video

DVD-RW

DVD-V

DVD-R

OPEN/

POWER

DVD-RW

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Using SKIP H / G buttons

Using DISPLAY button

PQRS

CLEAR

TUV

During play, press SKIP

During play, press DISPLAY

button.

SPACE

button to skip the current

title or chapter and move to

the next.

The title or chapter will move

forward by one at a time.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

The display menu will appear.

Screen:

DVD-Video

01:23:45

RETURN

SETUP

To go back to the previous title

or chapter, press SKIP H but-

ton.The title or chapter will move

backward one title at a time.

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Select

icon using { /

buttons, then press ENTER

button.

STOP

PLAY

REV

FWD

PAUSE

‘T’ for title will be highlighted.

Title:

Enter a desired title number

to search using K / L buttons

or number buttons, then

press ENTER button.

Title search will start.

Chapter:

To move to ‘C’ for chapter, press

B button.

Enter a desired chapter num-

ber to search using K / L but-

tons or number buttons, then

press ENTER button.

Chapter search will start.

Playing discs

Search (cont’d)

Track search

MP3

OPEN/

Using SKIP H / G buttons

POWER

Using DISPLAY button

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

During play, press SKIP

During play, press DISPLAY

button.

PQRS

CLEAR

TUV

button to skip the current

track and move to the next.

The track will move forward one

at a time.

SPACE

The display menu will appear.

Screen:

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Audio CD

01:23:45

To go back to the previous track,

press SKIP H button.The track

will move backward one at a time.

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

Select

icon using { /

SKIP

buttons, then press ENTER

button.

STOP

PLAY

REV

FWD

‘T’ for track will be highlighted.

PAUSE

Enter a desired track number

to search using K / L buttons

or number buttons, then

press ENTER button.

Track search will start.

Time search

OPEN/

POWER

Video

DVD-RW

DVD-V

DVD-R

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

DVD-RW

Select

icon using { /

PQRS

CLEAR

TUV

buttons, then press ENTER

button.

‘T’ for title or track will be high-

lighted.

SPACE

During play, press DISPLAY

button.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

The display menu will appear.

Screen for DVD:

To move to the clock icon, press

B button.

DVD-Video

01:23:45

RETURN

SETUP

Enter a desired time to

Screen for CD:

search using K / L buttons or

number buttons, then press

ENTER button.

Note

Audio CD

01:23:45

• Time search function is avail-

able only in the same track or

title.

Time search will start.

Playing discs

Repeat/Random/Program playback

Repeat play

Video

DVD-RW

Chapter:

The current chapter will be played

repeatedly. (DVD only)

OPEN/

DVD-V

DVD-R

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

MP3

DVD-RW

PQRS

CLEAR

TUV

All:

During play, press REPEAT

button.

Repeat menu will appear.

Screen:

SPACE

The current disc will be played

repeatedly. (CD, MP3, DVD-RW

(VR mode) only)

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

DVD-Video

01:23:45

A-B:

The A-B point will be played

repeatedly.

OFF

Title

Chapter

A-B

RETURN

SETUP

When pressing ENTER button

while A-B is highlighted, the start-

ing point (A) will be decided.

REC

SPEED

MONITOR

REC/OTR

SKIP

Select a desired option to

Press ENTER button again to

select the ending point (B).

Note

repeat using K / L buttons,

then press ENTER button.

The selected repeat play will start.

• The A-B Repeat playback can

only be set with in the cur-

rent title (for DVDs), or cur-

rent track (for Audio CDs).

• To cancel the repeat playback,

select OFF at step 2.

• You cannot select “Group”

during the random playback

of MP3 files.

Track:

The current track will be played

repeatedly. (CD, MP3 only)

Title:

The current title will be played

repeatedly. (DVD only)

Group:

The current group will be played

repeatedly. (MP3 only)

Random playback

MP3

OPEN/

POWER

With this function, you can play a

disc randomly instead of playing in

the original order.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Select “CD” using { / B but-

tons, then press ENTER but-

ton.

PQRS

CLEAR

TUV

CD Playback Mode menu will

appear.

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press SETUP button to dis-

play SETUP/CD menu.

SETUP/CD menu will appear.

Screen:

CD Playback Mode

Random Play

Program Play

RETURN

SETUP

Select “Random Play” using

Note

K / L buttons, then press

ENTER button.

Random play will start.

• To cancel random play, press

STOP C button twice during

random play.

Setup Menu

Playing discs

Repeat/Random/Program playback (cont’d)

Program play

You can program the disc to play

in your desired order.

OPEN/

POWER

Select “Program Play” using

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

K / L buttons, then press

ENTER button.

Program play list will appear.

PQRS

CLEAR

TUV

Press SETUP button to dis-

play SETUP/CD menu.

SETUP/CD menu will appear.

Screen:

SPACE

CD Playback Mode > Program Play

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

- - - - - - - - - - - - - - - - - - - -

Total

00:00:00

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Setup Menu

STOP

PLAY

Select a desired track using

L buttons, then press

REV

FWD

PAUSE

ENTER button or B button.

A cursor will move to next.

Select “CD” using { / B but-

tons, then press ENTER but-

ton.

CD Playback Mode > Program Play

07 - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - -

CD Playback Mode menu will

appear.

CD Playback Mode

Total

00:04:30

Random Play

Program Play

Press PLAY B button to start

program play.

Program play will start.

Note

• To erase tracks you selected,

press CLEAR button.

• You can make program set-

tings up to 50.

• To cancel program play, press

STOP C button twice during

program play.

• You may also select a desired

track using Number buttons

at step 4.

Playing discs

Selecting the format of audio and video

You can select an audio or video format as you prefer depending on

the contents of the disc you are playing.

Switching audio soundtrack

DVD-V

DVD-RW

<DVD-RWVR mode>

When playing a DVD-Video disc

recorded with two or more

soundtracks (these are often in

different languages), you can

switch them during play.

On DVD-RW discs recorded in

VR mode, you can switch to main

(L), sub audio (R) or a mix of

both (L/R).

OPEN/

POWER

DVD-RW

VR Original

00:00:00

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

1 Dolby Digital Dual L/R

2 Dolby Digital 2ch ----

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Select a desired audio sound-

RETURN

SETUP

During play, press DISPLAY

button.

track using K / L buttons,

then press ENTER button.

<DVD-Video>

REC

MONITOR

REC

SPEED

REC/OTR

The display menu will appear.

Screen:

SKIP

Audio soundtrack will switch.

STOP

PLAY

DVD-Video

01:23:45

REV

FWD

<DVD-RWVR mode>

PAUSE

DVD-RW

VR Original

00:00:00

1 Dolby Digital Dual

2 Dolby Digital 2ch

L/R

Select

Audio channel menu will appear.

Follow the step 4.

icon using { /

buttons, then press ENTER

button.

Audio menu will appear.

<DVD-Video>

Note

•

Some discs will only allow

you to change the sound-

track from the disc’s menu.

Press TOP MENU button or

MENU / LIST button to dis-

play the disc’s menu.

On DVD-RW discs recorded

inVR mode that may have

both a main and a sub audio

channel, you can switch to

main (L), sub audio (R) or a

mix of both (L/R).

Select a desired audio chan-

nel using K / L buttons, then

press ENTER button.

Audio channel will switch.

DVD-Video

00:00:00

1 Dolby Digital 5.1ch English

2 Dolby Digital 2ch Japanese

This unit CANNOT record in

both stereo and SAP

(Secondary Audio Program) at

the same time.

Playing discs

Selecting the format of audio and video (cont’d)

MP3

When playing Audio CDs or MP3

files you can switch between

stereo, just the left channel or

just the right channel.

OPEN/

POWER

Select

icon using { /

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

buttons, then press ENTER

button.

Audio menu will appear.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

During play, press DISPLAY

button.

The display menu will appear.

Screen:

Select a desired audio chan-

nel using K / L buttons, then

press ENTER button.

Audio channel will switch.

RETURN

SETUP

Audio CD

00:00:00

Audio CD

00:00:00

REC

MONITOR

REC

SPEED

REC/OTR

L/R

SKIP

STOP

PLAY

REV

FWD

PAUSE

Switching subtitles

DVD-V

DVD-RW

Many DVDVideo discs have subti-

tles in one or more languages –

the case usually tells you which

subtitle languages are available.

You can switch subtitle languages

anytime during playback.

OPEN/

POWER

Select

icon using { /

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

buttons, then press ENTER

button.

Subtitle menu will appear.

PQRS

CLEAR

TUV

SPACE

DVD-Video

00:00:00

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

OFF

1English

2Japanese

During play, press DISPLAY

button.

The display menu will appear.

Screen:

RETURN

SETUP

DVD-Video

01:23:45

REC

SPEED

MONITOR

REC/OTR

SKIP

Select a desired subtitle lan-

guage using K / L buttons,

then press ENTER button.

Subtitle will be displayed in the

selected language.

Note

• Some discs will only allow

you to change the subtitle

from the disc menu. Press

TOP MENU button or MENU

/ LIST button to display the

disc menu.

When selecting “OFF,” subtitle will

disappear.

Playing discs

Selecting the format of audio and video (cont’d)

Switching camera angles

DVD-V

Some DVDVideo discs feature

scenes shot from two or more

angles, check the case for details:

it should be marked with a angle

icon if it contains multi-angle

scenes.

OPEN/

POWER

Select

icon using { /

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

buttons, then press ENTER

button.

Angle will switch each time you

press ENTER button.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

During play, press DISPLAY

button.

The display menu will appear.

Screen:

RETURN

SETUP

DVD-Video

01:23:45

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Angle icon appears when a switch-

ing camera angle is available.

Reducing block noise

Video

OPEN/

DVD-V

DVD-R

POWER

DVD-RW

DVD-Video

00:00:00

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

DVD-RW

OFF

Type 1

Type 2

PQRS

CLEAR

TUV

SPACE

During play, press DISPLAY

button.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

The display menu will appear.

Screen:

DVD-Video

01:23:45

RETURN

SETUP

Select a desired option using

K / L buttons, then press

ENTER button.

Your setting will be activated.

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

This function reduces noise in the

playback picture.When playing

back discs recorded in long time

mode such as SLP or SEP mode,

select "Type 1" or "Type 2".

("Type 2" is more effective.)

When playing back discs with a

few noises such as DVD-Video

discs, select "OFF".

REV

FWD

PAUSE

Select

icon using { /

buttons, then press ENTER

button.

NR menu will appear.

Editing

Information on disc editing

Guide to a title list

Editing discs withVideo mode

Title list allows you to check the titles recorded on

the disc easily.You can choose a title to edit from this

screen and easily edit the titles as you prefer.

You can edit discs withVideo mode for the following

items. Be sure that once you edit titles, they will not

remain as original.

• Deleting titles (Refer to page 63)

• Putting names on titles (Refer to pages 64-65)

• Setting or clearing chapter markers (Refer to page 66)

Disc > Edit > Original

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Note

•

Once a disc is finalized, editing the disc or

recording to the disc will not be available.

(Except DVD-RW discs inVR mode.)

A playlist is not available with the DVD-R discs

and DVD-RW discs inVideo mode.

JAN/1 6:00AM

JAN/1 4:00AM

JAN/1 5:00AM

•

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

JAN/1 1:00AM CH12 XP

0:01:25

1. Titles recorded on the disc can be selected to

edit by pressing ENTER button with the cursor

on the title.

2. Protect icon, which appears when the title has

been protected.

3. The arrow icon, which means the title list

includes a next or a previous page. Press B or

{ button by following direction of the icon.

4. The menus in here for editing titles as you pre-

fer. The available menus depends on the disc

type and the format type.

5. The details of the title, which can be changed to

the title name you will edit.

6. Time status bar of the title.

7. The selected title thumbnails from the title list.

8. Playback status of the current disc.

Editing

Information on disc editing (cont’d)

Editing discs withVR mode

For discs withVR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the

original.

Editing original titles

The following items can be used to edit the original

titles.

• Deleting titles (Refer to page 67)

• Deleting parts of titles (Refer to pages 68-69)

• Putting names on titles (Refer to pages 69-70)

• Setting or clearing chapter markers (Refer to

pages 71-72)

Editing playlists

You can create a playlist from original titles, so that

you can edit as you prefer without losing original

titles.

The following items you can edit with a playlist.

• Deleting titles (Refer to page 76)

• Deleting parts of titles (Refer to pages 77-78)

• Putting names on titles (Refer to pages 78-79)

• Setting or clearing chapter markers (Refer to

pages 80-81)

• Setting pictures for thumbnails (Refer to pages

72-73)

• Setting titles to protect (Refer to page 74)

• Releasing titles from protecting (Refer to page 75)

• Setting pictures for thumbnails (Refer to pages

81-82)

• Adding titles to a playlist (Refer to page 83)

• Deleting a playlist (Refer to page 84)

Note

•

Original titles once edited will not remain as recorded originally.When you want to leave the original as

it is, edit the playlist as you prefer. (Refer to pages 76-84)

Editing

Editing DVD-RW discs inVideo mode

Deleting titles

Video

DVD-RW

You can delete titles which you

do not need anymore.

Be advised that the titles once

deleted cannot be brought back

to the disc.

When the last title in the title list

inVideo mode is deleted, the disc

space to record will be increased.

OPEN/

POWER

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Edit menu will appear.

SPACE

Disc > Edit

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Title Delete

Edit Title Name

Chapter Mark

JAN/ 1 1:00AM CH12 XP

Press SETUP button. Select

RETURN

SETUP

0:01:25

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Disc

STOP

PLAY

Select “Title Delete” using

L buttons, then press

ENTER button.

Edit

REV

FWD

Format

Finalize

PAUSE

Option window will appear.

Disc > Edit

Title Delete

Edit Title Name

Chapter Mark

Yes

JAN/ 1 1:00AM CH12 XP

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

0:01:25

Titlelist will appear.

Screen:

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Disc > Edit

Title will be deleted.

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Disc > Edit

Title Delete

JAN/1 4:00AM

JAN/1 5:00AM

Edit Title Name

Chapter Mark

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

This operation may take a

while to be completed.

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Editing

Editing DVD-RW discs inVideo mode (cont’d)

Putting names on titles

Video

DVD-RW

You can put title names on the

titles and change the names from

this menu.

The names you put on the titles

will be displayed on a titlelist.

OPEN/

POWER

Select “EditTitle Name”

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

using K / L buttons, then

press ENTER button.

A window for entering a title

name will appear.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit > Edit Title Name

Press SETUP button. Select

A B C

a b c

1 2 3

@ ! ?

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

RETURN

SETUP

JAN/ 1 1:00AM CH12 XP

0:01:25

Disc

REC

MONITOR

REC

SPEED

Edit

REC/OTR

Format

Finalize

SKIP

STOP

PLAY

REV

FWD

To enter a title name, follow

the steps of “Guide to edit

title name” on this page.

character set

PAUSE

Disc > Edit > Edit Title Name

A B C

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

[

]

Guide to edit title name

a b c

1 2 3

@ ! ?

[

]

Step1 : Select a desired character set using

buttons, then press

ENTER button.

A B C

a b c

1 2 3

@ ! ?

Titlelist will appear.

Screen:

JAN/ 1 1:00AM CH12 XP

0:01:25

]

Step2 : Press Number buttons following by the list

below.

Select

ABC

abc

123

@ ! ?

Disc > Edit

Press

area for entering title names

<space>

! ” # $ %

& ’ ( ) *

+ , - . / : ;

< = > ?

@ [ ] ^

_ { | }

When you finish entering a title

name, press ENTER button.

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

(*1)

JAN/1 4:00AM

JAN/1 5:00AM

(*2)

ABC

DEF

abc

def

(*2)

GHI

ghi

JKL

jkl

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

wxyz

*1 Press

*2 Press

button, character set will be changed

to the " @ " mode automatically.

buttons, character set will

be changed to the previous input mode

automatically.

Edit menu will appear.

To delete letters, press CLEAR button repeatedly.

Holding CLEAR button to delete all letters.

To go on to the next entering area for letters,

Disc > Edit

Title Delete

Edit Title Name

Chapter Mark

press

button.

You can enter up to 30 letters.

JAN/ 1 1:00AM CH12 XP

0:01:25

Editing

Editing DVD-RW discs inVideo mode (cont’d)

OPEN/

POWER

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

The name you entered will be

activated for the title.

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

Yes

RETURN

SETUP

abc

Writing to Disc

REC

SPEED

MONITOR

REC/OTR

SKIP

This operation may take a

while to be completed.

STOP

PLAY

REV

FWD

PAUSE

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Editing

Editing DVD-RW discs inVideo mode (cont’d)

Setting or clearing chapter markers

Video

DVD-RW

You can put chapter markers in

each title. Once a chapter is

marked, you can use it for the

chapter search feature.

You can set chapter markers at a

specified time you selected for

titles with more than 5 minutes.

OPEN/

Disc > Edit

POWER

Title Delete

Edit Title Name

Chapter Mark

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

JAN/ 1 1:00AM CH12 XP

SPACE

0:01:25

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press SETUP button. Select

Select “Chapter Mark” using

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

K / L buttons, then press

ENTER button.

Option window will appear.

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

SKIP

Disc

Disc > Edit

Edit

Title Delete

OFF

STOP

PLAY

Edit Title Name

5 minutes

Format

Finalize

Chapter Mark

REV

FWD

10 minutes

15 minutes

30 minutes

60 minutes

PAUSE

JAN/ 1 1:00AM CH12 XP

0:01:25

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Select a desired time using

L buttons, then press

ENTER button.

Titlelist will appear.

Screen:

Option window will appear.

Disc > Edit

Title Delete

OFF

5 minutes

Chapter Mark

10 minutes

Disc > Edit

Edit Title Name

15 minutes

30 minutes

60 minutes

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

JAN/1 4:00AM

JAN/1 5:00AM

Note

• You cannot select a time for

putting markers beyond a

length of a title.

• When recording at the

recording speed other than

XP or SEP, the leugth of chap-

ters may be slightly longer or

shorter than the one speci-

fied at the step 5.

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

Chapter markers will be added at

the specified time.

Edit menu will appear.

• A chapter marker may be

delayed according to the

recording content.

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Editing

Editing DVD-RW discs inVR mode (Original)

Deleting titles

DVD-RW

When a title is deleted from an

original list inVR mode, the disc

space to record will be increased.

Be advised that the titles once

deleted cannot be brought back

to the disc.

OPEN/

POWER

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Original menu will appear.

SPACE

Disc > Edit > Original

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

Press SETUP button. Select

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

JAN/ 1 1:00AM CH12 XP

RETURN

SETUP

0:01:25

REC

MONITOR

REC

SPEED

REC/OTR

Disc

Edit

SKIP

Format

Finalize

STOP

PLAY

Select “Title Delete” using

L buttons, then press

ENTER button.

Disc Protect OFF ON

REV

FWD

PAUSE

Option window will appear.

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture

Protect OFF ON

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Original/PlayList menu will appear.

Screen:

Disc > Edit

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Title will be deleted.

Original

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture

Protect OFF ON

Select “Original” using { /

buttons, then press ENTER

button.

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

Original list will appear.

This operation may take a

while to be completed.

Disc > Edit > Original

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

JAN/1 4:00AM

JAN/1 5:00AM

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

Deleting parts of titles

DVD-RW

You can delete part of a title, the

disc space to record will be

increased.

Be advised that the parts once

deleted cannot be brought back

to the disc.

OPEN/

POWER

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Original menu will appear.

SPACE

Disc > Edit > Original

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

Press SETUP button. Select

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

JAN/ 1 1:00AM CH12 XP

RETURN

SETUP

0:01:25

REC

MONITOR

REC

SPEED

REC/OTR

Disc

Edit

SKIP

Format

Finalize

STOP

PLAY

Select “Scene Delete” using

K / L buttons, then press

ENTER button.

Disc Protect OFF ON

REV

FWD

PAUSE

Option window will appear.

Disc > Edit > Original

Title Delete

Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

Index Picture

Select “Edit” using K / L but-

tons, then press ENTER button.

Original/PlayList menu will appear.

Screen:

Delete

Protect OFF

JAN/ 1 1:00AM CH12 XP

0:00:55

Disc > Edit

Press ENTER button to

decide a start point, then

press ENTER button to

decide an end point.

Original

A cursor will move to “Preview.”

You can check a preview.

Select “Original” using { /

buttons, then press ENTER

button.

Original list will appear.

Start point End point

Before

editing

Disc > Edit > Original

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Edited

JAN/1 4:00AM

JAN/1 5:00AM

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Select “Delete” using K /

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

buttons, then press ENTER

button.

Option window will appear.

PQRS

CLEAR

TUV

SPACE

Part of a title will be deleted.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit > Original

Title Delete

Scene Delete

Start

Edit Title Name

End

Edit Title Name

End

Chapter Mark

Preview

Index Picture

Delete

Protect OFF

Yes

JAN/ 1 1:00AM CH12 XP

Yes

RETURN

SETUP

JAN/ 1 1:00AM CH12 XP

Writing to Disc

0:01:25

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

This operation may take a

while to be completed.

Note

• You cannot select “Scene

Delete” when the number of

chapter markers in the original

or playlist is more than 900.

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Putting names on titles

DVD-RW

You can put title names on the

titles and change the names from

this menu.

The names you put on the titles

will be displayed on a titlelist.

OPEN/

POWER

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Original/PlayList menu will appear.

Screen:

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit

Press SETUP button. Select

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

RETURN

SETUP

Original

Disc

REC

MONITOR

REC

SPEED

Edit

REC/OTR

Format

SKIP

Finalize

Disc Protect OFF ON

STOP

PLAY

REV

FWD

PAUSE

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

OPEN/

POWER

To enter a title name, follow

the steps of “Guide to edit

title name” on this page.

character set

Select “Original” using { /

buttons, then press ENTER

button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Original list will appear.

SPACE

Disc > Edit > Original

Disc > Edit > Original > Edit Title Name

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

A B C

a b c

1 2 3

@ ! ?

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

JAN/ 1 1:00AM CH12 XP

JAN/1 4:00AM

JAN/1 5:00AM

RETURN

SETUP

0:01:25

area for entering title names

When you finish entering a title

name, press ENTER button.

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

REV

FWD

PAUSE

Original menu will appear.

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

The name you entered will be

activated for the title.

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

[

]

Guide to edit title name

[

]

Step1 : Select a desired character set using

buttons, then press

A B C

a b c

1 2 3

@ ! ?

Disc > Edit > Original > Edit Title Name

ENTER button.

JAN/ 1 1:00AM CH12 XP

A B C

a b c

1 2 3

@ ! ?

0:01:25

]

Step2 : Press Number buttons following by the list

below.

Select

ABC

abc

123

@ ! ?

Yes

Press

abc

<space>

Writing to Disc

! ” # $ %

& ’ ( ) *

+ , - . / : ;

< = > ?

@ [ ] ^

_ { | }

Select “EditTitle Name”

(*1)

using K / L buttons, then

press ENTER button.

A window for entering a title

name will appear.

This operation may take a

while to be completed.

(*2)

ABC

DEF

abc

def

(*2)

GHI

ghi

JKL

jkl

Disc > Edit > Original > Edit Title Name

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

A B C

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

a b c

1 2 3

@ ! ?

wxyz

*1 Press

*2 Press

button, character set will be changed

to the " @ " mode automatically.

JAN/ 1 1:00AM CH12 XP

0:01:25

buttons, character set will

be changed to the previous input mode

automatically.

To delete letters, press CLEAR button repeatedly.

Holding CLEAR button to delete all letters.

To go on to the next entering area for letters,

press

button.

You can enter up to 30 letters.

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

Setting or clearing chapter markers

DVD-RW

You can put chapter markers in

OPEN/

Disc > Edit > Original

POWER

each title. Once a chapter is

marked, you can use it for the

chapter search feature.

You can put a chapter marker

anywhere you want.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

PQRS

CLEAR

TUV

SPACE

JAN/1 4:00AM

JAN/1 5:00AM

When the number of chapter

markers in the original list comes

to 999 in total, you cannot add

any more chapter markers.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

RETURN

SETUP

Original menu will appear.

Press SETUP button. Select

REC

MONITOR

REC

SPEED

REC/OTR

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

Disc > Edit > Original

SKIP

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

STOP

PLAY

REV

FWD

PAUSE

Disc

Edit

JAN/ 1 1:00AM CH12 XP

Format

Finalize

0:01:25

Disc Protect OFF ON

Select “Chapter Mark” using

K / L buttons, then press

ENTER button.

Option window will appear.

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Disc > Edit > Original

Title Delete

Original/PlayList menu will appear.

Screen:

Scene Delete

Edit Title Name

Add

Chapter Mark

Chapter 1/1

Delete

Index Picture

Protect OFF ON

Disc > Edit

JAN/ 1 1:00AM CH12 XP

0:01:25

Select “Add” or “Delete”

Original

using K / L buttons, then

press ENTER button.

Option window will appear.

<Add>:

Select “Original” using { /

buttons, then press ENTER

button.

Disc > Edit > Original

Title Delete

Original list will appear.

Scene Delete

Edit Title Name

Add

Chapter Mark

Chapter 1/1

Delete

Index Picture

Protect OFF ON

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

<Delete>:

The chapter marker which you

selected will be deleted.

Disc > Edit > Original

OPEN/

POWER

Title Delete

Scene Delete

Edit Title Name

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Disc > Edit > Original

Add

Chapter Mark

Chapter 2/2

Delete

Index Picture

Title Delete

Protect OFF ON

Scene Delete

Edit Title Name

Chapter Mark

Yes

Add

Delete

PQRS

CLEAR

TUV

Chapter 2/2

JAN/ 1 1:00AM CH12 XP

Index Picture

Protect OFF ON

SPACE

0:01:25

Yes

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

JAN/ 1 1:00AM CH12 XP

Writing to Disc

• You cannot delete the first

chapter marker of each title.

This operation may take a

while to be completed.

Select “Yes” using { / B but-

tons, then press ENTER button.

<Add>:

RETURN

SETUP

REC

SPEED

A chapter marker will be added.

MONITOR

REC/OTR

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

SKIP

Disc > Edit > Original

STOP

PLAY

Title Delete

REV

FWD

Scene Delete

Edit Title Name

PAUSE

Add

Chapter Mark

Chapter 1/1

Delete

Index Picture

Protect OFF ON

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

This operation may take a

while to be completed.

Setting pictures for thumbnails

DVD-RW

OPEN/

POWER

You can set a picture to each title

for a thumbnail. It helps you to

remember the contents of the

title you are playing.The begin-

ning picture has been selected as

the default.

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Original/PlayList menu will appear.

Screen:

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit

Press SETUP button. Select

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

RETURN

SETUP

Original

REC

MONITOR

REC

SPEED

REC/OTR

Disc

Edit

Format

Note

Finalize

Disc Protect OFF ON

• If a selected picture for a

thumbnail is deleted by delet-

ing a part of a title, a default

picture will be selected.

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

OPEN/

POWER

Select “Original” using { /

buttons, then press ENTER

button.

Select “Yes” using { / B but-

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

tons, then press ENTER but-

ton.

A picture for thumbnail will be

set.

PQRS

CLEAR

TUV

Original list will appear.

SPACE

Disc > Edit > Original

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Yes

JAN/1 4:00AM

JAN/1 5:00AM

RETURN

SETUP

JAN/ 1 1:00AM CH12 XP

Writing to Disc

REC

SPEED

MONITOR

REC/OTR

SKIP

This operation may take a

while to be completed.

STOP

PLAY

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

REV

FWD

PAUSE

Original menu will appear.

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

JAN/ 1 1:00AM CH12 XP

0:01:25

Select “Index Picture Set”

using K / L buttons. Use SKIP

H / G, REV E, FWD D,

PLAY B and PAUSE F but-

tons to decide the picture

you want to select as a

thumbnail.Then press ENTER

button.

Option window will appear.

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

Setting titles to protect

DVD-RW

To prevent accidental editing, or

erasing the titles, you can protect

them from the original menu.

OPEN/

POWER

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Original menu will appear.

PQRS

CLEAR

TUV

SPACE

Disc > Edit > Original

Press SETUP button. Select

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Title Delete

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

JAN/ 1 1:00AM CH12 XP

Disc

0:01:25

RETURN

SETUP

Edit

Format

Finalize

REC

MONITOR

REC

SPEED

Disc Protect OFF ON

REC/OTR

Select “Protect OFF ➔ ON”

using K / L buttons, then

press ENTER button.

SKIP

STOP

PLAY

REV

FWD

PAUSE

Option window will appear.

Disc > Edit > Original

Title Delete

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Disc > Edit

Select “Yes” using { / B but-

tons, then press ENTER button.

Disc > Edit > Original

Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

Yes

Select “Original” using { /

buttons, then press ENTER

button.

JAN/ 1 1:00AM CH12 XP

Writing to Disc

Original list will appear.

This operation may take a

while to be completed.

Disc > Edit > Original

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

JAN/1 4:00AM

JAN/1 5:00AM

To protect a whole disc

(DVD-RWVR mode Only):

Select “Disc Protect” from Disc

menu, then select “Yes”.

Editing

Editing DVD-RW discs inVR mode (Original) (cont’d)

Releasing titles from protecting

DVD-RW

You are allowed to release the

titles protecting feature once pro-

tected.

OPEN/

POWER

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Original menu will appear.

SPACE

Press SETUP button. Select

Disc Edit > Original

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect ON OFF

JAN/ 1 2:00AM CH12 XP

0:01:25

Disc

RETURN

SETUP

Edit

Format

Finalize

“Protect ON → OFF” is selected.

REC

MONITOR

REC

SPEED

Disc Protect OFF ON

REC/OTR

SKIP

STOP

PLAY

REV

FWD

Press ENTER button.

Option window will appear.

PAUSE

Disc Edit > Original

Title Delete

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect ON OFF

Yes

JAN/ 1 2:00AM CH12 XP

0:01:25

Disc > Edit

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Original

Disc Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect ON OFF

Select “Original” using { /

buttons, then press ENTER

button.

Yes

JAN/ 1 2:00AM CH12 XP

Writing to Disc

Original list will appear.

This operation may take a

while to be completed.

Disc > Edit > Original

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

JAN/1 4:00AM

JAN/1 5:00AM

Editing

Editing DVD-RW discs inVR mode (Playlist)

Deleting titles

DVD-RW

InVR mode, even when a title is

deleted from a Playlist, the original

title will remain in an Original list.

The disc space to record will not

be increased.

OPEN/

POWER

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Playlist menu will appear.

SPACE

Disc > Edit > Playlist

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Press SETUP button. Select

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

JAN/ 1 1:00AM CH12 XP

RETURN

SETUP

0:01:25

Disc

REC

MONITOR

REC

SPEED

Edit

REC/OTR

Format

SKIP

Finalize

Disc Protect OFF ON

Select “Title Delete” using

STOP

PLAY

L buttons, then press

REV

FWD

PAUSE

ENTER button.

Option window will appear.

Disc > Edit > Playlist

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Original/PlayList menu will appear.

Screen:

Disc > Edit

Select “Yes” using { / B but-

tons, then press ENTER button.

Title will be deleted.

Disc > Edit > Playlist

Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

Select “PlayList” using { /

buttons, then press ENTER

button.

This operation may take a

while to be completed.

Playlist will appear.

Disc > Edit > Playlist

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Add New

Title

Delete

Playlist

JAN/1 4:00AM

JAN/1 5:00AM

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

Deleting parts of titles

DVD-RW

You can delete a specific part of a

title.

Even when a title is deleted from

the playlist, the original title will

remain.

OPEN/

POWER

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Playlist menu will appear.

The disc space to record will not

be increased.

SPACE

Disc > Edit > Playlist

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Press SETUP button. Select

JAN/ 1 1:00AM CH12 XP

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

RETURN

SETUP

0:01:25

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Disc

Edit

STOP

PLAY

Select “Scene Delete” using

Format

REV

FWD

Finalize

K / L buttons, then press

ENTER button.

Option window will appear.

PAUSE

Disc Protect OFF ON

Disc > Edit > Playlist

Title Delete

Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

Index Picture

Delete

Select “Edit” using K / L but-

tons, then press ENTER button.

Original/PlayList menu will appear.

Screen:

JAN/ 1 1:00AM CH12 XP

0:00:55

Disc > Edit

Press ENTER button to

decide a start point, then

press ENTER button to

decide an end point.

A cursor will move to “Preview”.

You can check a preview.

Original

Select “PlayList” using { /

buttons, then press ENTER

button.

Start point End point

Playlist will appear.

Before

editing

Disc > Edit > Playlist

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

Edited

JAN/1 4:00AM

JAN/1 5:00AM

Instructions continue to the next page.

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

Part of a title will be deleted.

OPEN/

POWER

Disc > Edit > Playlist

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Title Delete

Select “Delete” using K /

Scene Delete

Start

Edit Title Name

End

buttons, then press ENTER

button.

Option window will appear.

Chapter Mark

Preview

PQRS

CLEAR

TUV

Index Picture

Delete

SPACE

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit > Playlist

Title Delete

Scene Delete

Start

Edit Title Name

End

This operation may take a

while to be completed.

Chapter Mark

Preview

Index Picture

Delete

Yes

JAN/ 1 1:00AM CH12 XP

RETURN

SETUP

0:01:25

REC

MONITOR

REC

SPEED

REC/OTR

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Note

• You cannot select “Scene

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Delete” when the number of

chapter markers in the original

or playlist is more than 900.

Putting names on titles

Screen:

DVD-RW

Disc > Edit

You can put names on the titles

and change the names from this

menu.

The names you put on the titles

will be displayed on a titlelist.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Original

PQRS

CLEAR

TUV

Press SETUP button. Select

SPACE

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Select “PlayList” using { /

buttons, then press ENTER

button.

Disc

Playlist will appear.

Edit

RETURN

SETUP

Format

Finalize

Disc > Edit > Playlist

Disc Protect OFF ON

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

STOP

PLAY

Delete

Playlist

REV

FWD

JAN/1 4:00AM

JAN/1 5:00AM

PAUSE

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

OPEN/

POWER

Select a desired title using K / Select “Yes” using { / B but-

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

tons, then press ENTER but-

ton.

The name you entered will be

activated for the title.

L / { / B buttons, then press

ENTER button.

Playlist menu will appear.

PQRS

CLEAR

TUV

SPACE

Disc > Edit > Playlist

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Title Delete

Disc > Edit > Playlist > Edit Title Name

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

A B C

a b c

1 2 3

@ ! ?

JAN/ 1 1:00AM CH12 XP

Yes

RETURN

SETUP

0:01:25

abc

Writing to Disc

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

This operation may take a

while to be completed.

STOP

PLAY

Select “EditTitle Name”

REV

FWD

using K / L buttons, then

press ENTER button.

A window for entering a title

name will appear.

PAUSE

After writing to disc is com-

pleted, press SETUP to exit

DISC menu.

Disc > Edit > Playlist > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

[

]

Guide to edit title name

[

]

Step1 : Select a desired character set using

buttons, then press

ENTER button.

A B C

a b c

1 2 3

@ ! ?

JAN/ 1 1:00AM CH12 XP

]

Step2 : Press Number buttons following by the list

0:01:25

below.

Select

ABC

abc

123

@ ! ?

Press

<space>

! ” # $ %

& ’ ( ) *

+ , - . / : ;

< = > ?

@ [ ] ^

_ { | }

(*1)

To enter a title name, follow

the steps of “Guide to edit

title name” on this page.

character set

(*2)

ABC

DEF

abc

def

(*2)

GHI

ghi

JKL

jkl

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

Disc > Edit > Playlist > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

wxyz

*1 Press

*2 Press

button, character set will be changed

to the " @ " mode automatically.

JAN/ 1 1:00AM CH12 XP

buttons, character set will

be changed to the previous input mode

automatically.

0:01:25

To delete letters, press CLEAR button repeatedly.

Holding CLEAR button to delete all letters.

To go on to the next entering area for letters,

area for entering title names

press

button.

When you finish entering a title

name, press ENTER button.

You can enter up to 30 letters.

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

Setting or clearing chapter markers

DVD-RW

You can put chapter markers in

each title. Once a chapter is

marked, you can use it for the

chapter search feature.

You can put a chapter marker

anywhere you want.

OPEN/

Disc > Edit > Playlist

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

PQRS

CLEAR

TUV

SPACE

JAN/1 4:00AM

JAN/1 5:00AM

When the number of chapter

markers in the playlist comes to

999 in total, you cannot add any

more chapter markers.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

RETURN

SETUP

Playlist menu will appear.

Press SETUP button. Select

REC

MONITOR

REC

SPEED

REC/OTR

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

Disc > Edit > Playlist

SKIP

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

STOP

PLAY

REV

FWD

PAUSE

Disc

Edit

JAN/ 1 1:00AM CH12 XP

Format

Finalize

0:01:25

Disc Protect OFF ON

Select “Chapter Mark” using

K / L buttons, then press

ENTER button.

Option window will appear.

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Disc > Edit > Playlist

Title Delete

Original/PlayList menu will appear.

Screen:

Scene Delete

Edit Title Name

Add

Chapter 1/1

Chapter Mark

Delete

Index Picture Set

Disc > Edit

JAN/ 1 1:00AM CH12 XP

0:01:25

Select “Add” or “Delete”

Original

using K / L buttons, then

press ENTER button.

Option window will appear.

<Add>:

Select “PlayList” using { /

buttons, then press ENTER

button.

Disc > Edit > Playlist

Title Delete

Playlist will appear.

Scene Delete

Edit Title Name

Add

Chapter 1/1

Chapter Mark

Delete

Index Picture Set

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

<Delete>:

The chapter marker which you

selected will be deleted.

<Delete>:

Disc > Edit > Playlist

OPEN/

POWER

Title Delete

Scene Delete

Edit Title Name

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Disc > Edit > Playlist

Add

Chapter 2/2

Chapter Mark

Delete

Index Picture Set

Title Delete

Scene Delete

Edit Title Name

Yes

Add

PQRS

CLEAR

TUV

Chapter 2/2

Chapter Mark

Delete

JAN/ 1 1:00AM CH12 XP

Index Picture Set

SPACE

0:01:25

Yes

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

JAN/ 1 1:00AM CH12 XP

Writing to Disc

• You cannot delete the first

chapter of each title.

This operation may take a

while to be completed.

Select “Yes” using { / B but-

tons, then press ENTER button.

A chapter marker will be added.

<Add>:

RETURN

SETUP

REC

SPEED

MONITOR

REC/OTR

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

SKIP

Disc > Edit > Playlist

STOP

PLAY

Title Delete

REV

FWD

Scene Delete

Edit Title Name

PAUSE

Add

Chapter 1/1

Chapter Mark

Delete

Index Picture Set

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

This operation may take a

while to be completed.

Setting pictures for thumbnails

OPEN/

POWER

DVD-RW

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

You can set a picture to each title

for a thumbnail. It helps you to

remember the contents of the

title you are playing.The begin-

ning picture has been selected as

the default.

VCR Plus

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit

Press SETUP button. Select

RETURN

SETUP

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

REC

MONITOR

REC

SPEED

REC/OTR

Original

Disc

Edit

Note

Format

Finalize

• If a selected picture for a

Disc Protect OFF ON

thumbnail is deleted by delet-

ing a part of a title, a default

picture will be selected.

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

OPEN/

POWER

Select “PlayList” using { /

buttons, then press ENTER

button.

Select “Yes” using { / B but-

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

tons, then press ENTER but-

ton.

A picture for thumbnail will be

set.

PQRS

CLEAR

TUV

Playlist will appear.

SPACE

Disc > Edit > Playlist

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Disc > Edit > Playlist

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

Yes

JAN/1 4:00AM

JAN/1 5:00AM

RETURN

SETUP

JAN/ 1 1:00AM CH12 XP

Writing to Disc

REC

SPEED

MONITOR

REC/OTR

SKIP

This operation may take a

while to be completed.

STOP

PLAY

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

REV

FWD

PAUSE

Playlist menu will appear.

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Disc > Edit > Playlist

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

JAN/ 1 1:00AM CH12 XP

0:01:25

Select “Index Picture Set”

using K / L buttons. Use SKIP

H / G, REV E, FWD D,

PLAY B and PAUSE F but-

tons to decide the picture

you want to select as a

thumbnail.Then press ENTER

button.

Option window will appear.

Disc > Edit > Playlist

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

Adding titles to a Playlist

DVD-RW

You can add or delete a title in

the playlist as you prefer.

You can add titles to a Playlist up

to 99.

OPEN/

POWER

Select “Add NewTitle” using

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

K / L / { / B buttons, then

press ENTER button.

Original list will appear.

PQRS

CLEAR

TUV

SPACE

Disc > Edit > Playlist > Add New Title

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press SETUP button. Select

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

JAN/10 10:30AM

JAN/12 5:00PM

JAN/12 8:00PM

RETURN

SETUP

Disc

Edit

Format

REC

SPEED

MONITOR

REC/OTR

Finalize

Disc Protect OFF ON

SKIP

STOP

PLAY

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

REV

FWD

PAUSE

Disc > Edit > Playlist > Add New Title

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

58%

Writing to Disc

Disc > Edit

Disc > Edit > Playlist

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

JAN/1 5:00AM

JAN/12 8:00PM

Original

Select “PlayList” using { /

buttons, then press ENTER

button.

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Playlist will appear.

To delete a title from Playlist,

refer to “Deleting titles” on page

76.

Disc > Edit > Playlist

To delete a Playlist, refer to

“Deleting a Playlist” on page 84.

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

JAN/1 4:00AM

JAN/1 5:00AM

Editing

Editing DVD-RW discs inVR mode (Playlist) (cont’d)

Deleting a Playlist

DVD-RW

A Playlist can be deleted if no

longer needed.

OPEN/

POWER

Select “Delete Playlist” using

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

K / L / { / B buttons, then

press ENTER button.

Option window will appear.

PQRS

CLEAR

TUV

Press SETUP button. Select

SPACE

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

Disc > Edit > Playlist

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

Disc

Edit

Yes

JAN/1 4:00AM

JAN/1 5:00AM

Format

RETURN

SETUP

Finalize

Disc Protect OFF ON

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Playlist will be erased.

After writing to disc is completed,

the DVD recorder will be in stop

mode.

REV

FWD

PAUSE

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

Disc > Edit

Original

Select “PlayList” using { /

buttons, then press ENTER

button.

Playlist will appear.

Disc > Edit > Playlist

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

Note

JAN/1 4:00AM

JAN/1 5:00AM

• Deleting a Playlist will not

increase the available record-

ing time.

Editing

Editing DVD-R discs

Deleting titles

DVD-R

Disc > Edit

You can delete titles which you

do not need, however the disc

space to record will not be

changed.

Be sure to know that the titles

once deleted cannot be brought

back to the disc.

Title Delete

OPEN/

POWER

Edit Title Name

Chapter Mark

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

JAN/ 1 1:00AM CH12 XP

0:01:25

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

You cannot select “Chapter Mark”.

Press SETUP button. Select

Select “Title Delete” using

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

L buttons, then press

RETURN

SETUP

ENTER button.

Option window will appear.

REC

SPEED

MONITOR

REC/OTR

SKIP

Disc

Disc > Edit

Edit

STOP

PLAY

Title Delete

Format

Finalize

Edit Title Name

Chapter Mark

REV

FWD

PAUSE

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

Select “Edit” using K / L but-

tons, then press ENTER but-

ton.

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

Titlelist will appear.

Screen:

Title will be deleted.

Disc > Edit

Title Delete

Edit Title Name

Chapter Mark

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

JAN/1 4:00AM

JAN/1 5:00AM

This operation may take a

while to be completed.

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Edit menu will appear.

Editing

Editing DVD-R discs (cont’d)

Putting names on titles

DVD-R

You can put names on the titles

and change the names from this

menu.

The names you put on the titles

will be displayed on a titlelist.

OPEN/

POWER

Select “EditTitle Name”

using K / L buttons, then

press ENTER button.

A window for entering a title

name will appear.

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

SPACE

Disc > Edit > Edit Title Name

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

A B C

a b c

1 2 3

@ ! ?

Press SETUP button. Select

“DISC” using { / B buttons,

then press ENTER button.

DISC menu will appear.

JAN/ 1 1:00AM CH12 XP

RETURN

SETUP

0:01:25

Disc

REC

MONITOR

REC

SPEED

Edit

REC/OTR

Format

Finalize

SKIP

To enter a title name, follow

the steps of “Guide to edit

STOP

PLAY

REV

FWD

title name” on this page.

PAUSE

character set

Disc > Edit > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

Select “Edit” using K /

but-

tons, then press ENTER button.

Titlelist will appear.

Screen:

[

]

Guide to edit title name

[

]

JAN/ 1 1:00AM CH12 XP

Step1 : Select a desired character set using

buttons, then press

ENTER button.

A B C

a b c

1 2 3

@ ! ?

0:01:25

area for entering title names

When you finish entering a title

name, press ENTER button.

Disc > Edit

]

Step2 : Press Number buttons following by the list

below.

Select

ABC

abc

123

@ ! ?

Press

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

<space>

! ” # $ %

& ’ ( ) *

+ , - . / : ;

< = > ?

@ [ ] ^

_ { | }

(*1)

Select “Yes” using { / B but-

tons, then press ENTER but-

ton.

JAN/1 4:00AM

JAN/1 5:00AM

(*2)

ABC

DEF

abc

def

(*2)

GHI

ghi

Disc > Edit > Edit Title Name

JKL

jkl

Select a desired title using K /

L / { / B buttons, then press

ENTER button.

A B C

a b c

1 2 3

@ ! ?

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

wxyz

Edit menu will appear.

Yes

*1 Press

*2 Press

button, character set will be changed

abc

to the " @ " mode automatically.

Writing to Disc

Disc > Edit

buttons, character set will

be changed to the previous input mode

automatically.

To delete letters, press CLEAR button repeatedly.

Holding CLEAR button to delete all letters.

To go on to the next entering area for letters,

Title Delete

Edit Title Name

Chapter Mark

This operation may take a

while to be completed.

press

button.

JAN/ 1 1:00AM CH12 XP

You can enter up to 30 letters.

0:01:25

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

You cannot select “Chapter Mark”.

Changing the SETUP menu

Tour of the SETUP menu

The following table is the contents which you can set and the default settings.

Refer to the following table for useful operation.

SETUP menu

Items (highlight is the default)

Contents

1.Language setting

Pages 88-89

English

French

Spanish

Disc Menu Language

Set the language for disc menu.

Original

English

French

Audio Language

Subtitle Language

Set the language for audio.

Set the language for subtitle.

OFF

English

French

100%

OSD Background

Transparency

Set the background transparency of OSD

screen.

2.Display setting

Pages 90-91

35%

25%

OSD Background

Color

Set the OSD screen color.

1 (Green), 2 (Blue), 3 (Red)

OSD Language

English

Français

Español

Set the language for OSD

(On Screen Display).

Auto

Bright

Dark

FL Dimmer

Set the brightness of front display.

Screen Saver

OFF

5 minutes

10minutes

Set the time to work the screen saver on

the screen.

PCM

Digital Out

3.Audio setting

Pages 92-93

Set whether the sound recorded in 96kHz

will be down sampled in 48kHz.

Auto

48kHz

96kHz

Dolby Digital

Set the type of sound signal which outputs

from the digital audio output jack.

PCM

Stream

DTS

Set wether DTS signal will be output

or not.

OFF

Compressing the range of sound volume.

Dynamic Range

Control

OFF

Outputting the sound during play in fast

forward.

Fast Forward with

Audio

OFF

4.Parental setting

Pages 94-95

ALL

level 8 to 1

Set the parental level of your DVD discs.

Parental Lock

Enter the current

four-digit password

Set and change the password.

(Change password)

Note

•

If you change the setting in SETUP menu,

the information of contents stays on

even when the power is switched off.

Changing the SETUP menu

Settings for Language

Press STOP button if you are playing a disc.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Setup Menu

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

Select “SETUP” using { / B buttons, then press

ENTER button.

SKIP

SETUP menu will appear.

STOP

PLAY

REV

FWD

PAUSE

Setup

Playback Setting

Select “Playback” using K / L / { /

buttons, then press

ENTER button.

Option window will appear.

Setup > Playback

TV Aspect

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Dynamic Range Control

Fast Forward with Audio

OFF

Select a desired item using K / L buttons, then press

Note

ENTER button.

• Only the languages supported

by the disc can be selected.

• Audio Language setting may

not be available to some

discs.

• You can change or switch off

the subtitles on a DVD disc

also from the disc menu if it

is available.

Changing the SETUP menu

Settings for Language (cont’d)

Disc Menu Language (Default : English)

Set the language for Disc Menu.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Playback

TV Aspect

4:3 Letter Box

All

TV Aspect

4:3 Letter Box

All

Parental Lock

Your setting will be activated.

English

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

French

Original

Spanish

OFF

Other

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

Audio Language (Default : Original)

Set the Audio language.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Playback

TV Aspect

4:3 Letter Box

All

4:3 Letter Box

All

Parental Lock

Original

Your setting will be activated.

English

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

French

OFF

Spanish

Other

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

Subtitle Language (Default : OFF)

Set the subtitle language.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Playback

TV Aspect

4:3 Letter Box

All

4:3 Letter Box

All

Parental Lock

OFF

Your setting will be activated.

English

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

French

OFF

Spanish

Other

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

If “Other” is selected, press 4-digit code using number buttons.

All

English

•

When you finish entering

the code, press ENTER

button. Refer to the lan-

guage code table on page

101.

age

English

French

Original

Spanish

OFF

Other

Code Input

- - - -

Control

Audio

OFF

Press SETUP button to exit SETUP menu.

Changing the SETUP menu

Settings for Display

Press STOP button if you are playing a disc.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Setup Menu

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

Select “SETUP” using { / B buttons, then press

ENTER button.

SKIP

SETUP menu will appear.

STOP

PLAY

REV

FWD

PAUSE

Setup

Playback Setting

Select “Display” using K / L / { /

buttons, then press

ENTER button.

Option window will appear.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

35%

English

Bright

10 minutes

FL Dimmer

Screen Saver

Select a desired item using K / L buttons, then press

ENTER button.

Changing the SETUP menu

Settings for Display (cont’d)

OSD BackgroundTransparency (Default : 35%)

Set the background transparency of OSD screen.

You can choose one among 0% through 100%.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

35%

100%

35%

OSD Background Transparency

OSD Background Color

OSD Language

85%

70%

Your setting will be activated.

English

Bright

10 minutes

English

50%

Bright

FL Dimmer

35%

Screen Saver

25%

Screen Saver

10 minutes

10%

OSD Background Color (Default : 1 Green)

Set the OSD screen color.

You can choose one among 1(Green), 2(Blue), and 3(Red).

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

35%

OSD Background Transparency

OSD Background Color

OSD Language

35%

Your setting will be activated.

English

Bright

10 minutes

English

FL Dimmer

Bright

Screen Saver

10 minutes

OSD Language (Default : English)

Set the language for OSD.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

35%

OSD Background Transparency

OSD Background Color

OSD Language

35%

Your setting will be activated.

English

Bright

10 minutes

English

Français

FL Dimmer

Bright

Español

Screen Saver

10 minutes

FL Dimmer (Default : Bright)

Set the brightness of front display.

You can choose one among “Auto”, ”Bright” and ”Dark”.

When “Auto” is selected, the display dims after 15 seconds of no use.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

35%

OSD Background Transparency

OSD Background Color

OSD Language

35%

Your setting will be activated.

English

Bright

10 minutes

English

Bright

FL Dimmer

Screen Saver

Auto

Screen Saver

10 minutes

Bright

Dark

Screen Saver (Default : 10 minutes)

Set the time to work the screen saver function on the screen.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

35%

OSD Background Transparency

OSD Background Color

OSD Language

35%

Your setting will be activated.

English

Bright

10 minutes

English

OFF

FL Dimmer

Bright

5 minutes

Screen Saver

10 minutes

15 minutes

30 minutes

Press SETUP button to exit SETUP menu.

Changing the SETUP menu

Settings for Audio

Choose the appropriate Audio settings for your equipment.

It will only affect DVD discs during playback.

Press STOP button if you are playing a disc.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PQRS

CLEAR

TUV

Press SETUP button to display SETUP/DISC menu.

SPACE

SETUP/DISC menu will appear.

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

RETURN

SETUP

Setup Menu

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

STOP

PLAY

Select “SETUP” using { / B buttons, then press

REV

FWD

PAUSE

ENTER button.

Setup

SETUP menu will appear.

Playback Setting

Select “Playback” using K / L / { /

buttons, then press

ENTER button.

Option window will appear.

Setup > Playback

TV Aspect

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Dynamic Range Control

Fast Forward with Audio

OFF

Note

• Dynamic Range Control func-

tion is available only on the

discs which are recorded in

the Dolby Digital format.

Select a desired item using K / L buttons, then press

ENTER button.

Digital Out

Set the digital audio output.

•

Select a setting using K /

buttons, then press ENTER

button.

Setup > Playback

TV Aspect

4:3 Letter Box

All

TV Aspect

4:3 Letter Box

All

Parental Lock

Option window will appear.

Proceed to steps A, B or C.

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

PCM

Dynamic Range Control

Fast Forward with Audio

Dolby Digital

DTS

OFF

Dynamic Range Control

Fast Forward with Audio

OFF

Changing the SETUP menu

Settings for Audio (cont’d)

Settings for PCM (Default :Auto)

•

Select a setting using K / L buttons, then

Original

OFF

Note

press ENTER button.

When playing disc with copy-

right protection

Your setting will be activated.

Auto

: Select “Auto” usually.

PCM Auto

• If you select “Auto”, the sound

will be down sampled at 48kHz.

• If you select “96kHz”, no digital

sound will be output. Select

“Auto”, so that outputting

48kHz digital sound.

48kHz : If your amplifier/decoder is NOT com-

patible with 96kHz PCM, select “48kHz”.

96kHz sound will be output in 48kHz.

96kHz : If your amplifier/decoder is compatible

with 96kHz PCM, select “96kHz”. 96kHz

sound will be output.

Dolby D4ig8iktaHlz

ntrol

udio

DTS 96kHz

OFF

Settings for Dolby Digital (Default : Stream)

Original

OFF

•

Select a setting using K / L buttons, then

Note

press ENTER button.

When playing a DVD-RW

disc recorded inVR mode

• If the audio source on a disc is

Dolby Digital format, set “Dolby

Digital” to “PCM” so that you

can switch to main (L), sub

Your setting will be activated.

PCM : Convert the Dolby Digital into PCM(2

channel).

PCM

Dolby Digital

ntrol

udio

PCM

Stream

OFF

When your amplifier/decoder is NOT com-

patible with Dolby Digital, set to “PCM”

DTS

Stream : Outputs Dolby Digital signals

audio (R), or a mix of both (L/R)

with your amplifier/decoder.

When your amplifier/decoder is compatible

with Dolby Digital, set to “Stream”.

Settings for DTS (Default : OFF)

•

Select a setting using K / L buttons, then press ENTER button.

Original

OFF

Your setting will be activated.

OFF

: Outputs DTS signals.

When your amplifier/decoder is compatible with DTS, set to “ON”.

: No DTS signal is output.

PCM

Dolby Digital

ntrol

udio

When your amplifier/decoder is NOT compatible with DTS, set to

“OFF”.

DTS

OFF

Dynamic Range Control (Default : ON)

Set to ON to compress the range between soft and loud sounds.

Setup > Playback

•

Select a setting using K /

buttons, then press ENTER

button.

TV Aspect

4:3 Letter Box

All

TV Aspect

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Your setting will be activated.

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

Fast Forward with Audio (Default : OFF)

Set to ON to output the sound during play in fast forward of x2.

Setup > Playback

•

Select a setting using K /

buttons, then press ENTER

button.

TV Aspect

4:3 Letter Box

All

TV Aspect

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Your setting will be activated.

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

Press SETUP button to exit SETUP menu.

Changing the SETUP menu

Settings for Parental lock level

Some DVD-Video discs feature a Parental Lock level. Playback

will stop if the ratings exceed the levels you set, it will require

you to enter a password before the disc will playback.This fea-

ture prevents your children from viewing inappropriate materi-

al.

OPEN/

POWER

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

Press STOP button if you are playing a disc.

PQRS

CLEAR

TUV

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

RETURN

SETUP

REC

MONITOR

REC

SPEED

REC/OTR

SKIP

Setup Menu

STOP

PLAY

REV

FWD

PAUSE

Select “SETUP” using { / B buttons, then press

ENTER button.

SETUP menu will appear.

Setup

Playback Setting

Select “Playback” using K / L / { /

buttons, then press

ENTER button.

Option window will appear.

Setup > Playback

TV Aspect

4:3 Letter Box

All

Note

Parental Lock

• Parental lock function may

not be available to some

discs.

• With some DVDs, it may be

difficult to find if they are

compatible with parental lock.

Be sure to check if the

parental lock function oper-

ates in the way that you have

set.

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Dynamic Range Control

Fast Forward with Audio

OFF

Select “Parental Lock” using K / L buttons, then press

ENTER button.

• Record the password in case

you forget it.

Changing the SETUP menu

Settings for Parental lock level (cont’d)

Parental Lock (Default :All)

Set the Parental Lock level.

•

Change the parental level

using K / L buttons, then

press ENTER button.

Setup > Playback

TV Aspect

4:3 Letter Box

All

TV Aspect

4:3 Letter Box

All

Parental Lock

All

Option window will appear

Proceed to steps A or B.

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

A password has not been set yet

•

Select “Yes” using s /

Setup > Playback

buttons, then enter a new

password using Number

buttons.

TV Aspect

4:3 Letter Box

Change Password?

Yes

TV Aspect

All

4:3 Letter Box

Password

All

Yes

- - - -

Parental Lock

All

Parental Lock

All

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

Your setting will be activated.

OFF

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

• If you select “No”, proceed

to Step 5.

A password has been set already

Change the password

Setup > Playback

TV Aspect

4:3 Letter Box

All

4:3 Letter Box

Change Password?

TV Aspect

4:3 Letter Box

Password

All

Yes

All

Yes

- - - -

Password

Parental Lock

All

Parental Lock

All

Parental Lock

* * * *

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Disc Menu Language

Audio Language

English

Original

OFF

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

Dynamic Range Control

Fast Forward with Audio

OFF

• If you select “No”, proceed

to Step 5.

•

Enter the current password

using Number buttons.

•

Select “Yes” using s /

buttons, then enter a new

password using Number

buttons.

Your setting will be activated.

Note

• Press CLEAR button to erase

numbers entered incorrectly.

• When you forget the pass-

word or you want to clear all

settings in Parental lock, enter

4,7,3,7 using Number buttons

in option window. Password

will be cleared and parental

levels will be set to All.

Press SETUP button to exit SETUP menu.

Others

Troubleshooting

Before requesting service for this DVD recorder, check the table below for a possible cause of the problem

you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem

and restore proper operation.

Symptom

Power

Remedy

The power does not turn on.

• Check that the AC power cord is connected securely.

Picture

There is no picture.

• Re-connect the connecting cord securely.

• The connecting cords are damaged.

• The Setup Display appears. Press SETUP or RETURN

button to turn off the display.

• Check the connection to yourTV (page 13).

• Check if the INTERLACE/PROGRESSIVE mode is set correctly

according to yourTV. See page 13.

•

Switch the input selector on yourTV (such as to "LINE1") so that

the signal from the DVD recorder appears on theTV screen.

Picture noise appears.

• The disc is dirty or flawed.

• If the picture output signal from the DVD recorder passes

through yourVCR to get to yourTV, or if you are connected to

a combinationTV/VIDEO player, the copy-protection signal

applied to some DVD programs could affect picture quality. If

you still experience this problem even when you connect the

DVD recorder directly to yourTV, try connecting the DVD

recorder to yourTV's S-VIDEO input.

TV program reception does not fill the

screen.

• Try to set the channels with "Auto Preset" in SETUP menu

(page 18).

• Select a channel of anyTV program using the CHo /p

buttons.

TV program pictures are distorted.

TV channels cannot be changed.

• AdjustTV antenna.

• Adjust the picture (see theTV's instruction manual).

• Place the DVD recorder andTV farther apart.

• Place theTV and any bunched antenna cables farther apart.

• Switch the input toTV.

• Connect the antenna cable correctly (page 13).

The playback picture orTV program from • If the playback picture output from a DVD player,VCR, or tuner

the equipment connected through the

DVD recorder is distorted.

goes through the DVD recorder before reaching yourTV, the

copy-protection signal applied to some programs could affect

picture quality. Disconnect the playback equipment in question

and connect it directly to yourTV.

Sound

There is no sound.

• The disc is dirty or flawed.

• Re-connect all connections securely.

• The connecting cord is damaged.

• Check the connections to the amplifier input.

• The input source setting on the amplifier is incorrect.

• The recorder is in pause mode or in Slow-motion Play mode.

• The recorder is in fast forward or fast reverse mode.

• If the audio signal does not come through the DIGITAL AUDIO

OUT jacks, check the Audio Setup settings (pages 92-93).

• The disc is dirty or flawed.

Sound is noisy.

Others

Troubleshooting (cont’d)

Symptom

Playback

Remedy

• No disc is inserted.

• A blank disc is inserted.

The disc does not play.

• The disc is upside down. Insert the disc with the labeled side

facing up.

• The disc is not correctly inserted.

• The DVD recorder cannot play certain discs (such as a CD-

ROM) (page 44).

• The region code on the DVDVIDEO does not match the DVD

recorder (page 44).

• Moisture has condensed inside the DVD recorder. Remove the

disc and leave the DVD recorder turned on at least for 2 hours

until the moisture evaporates (page 4).

• If the disc was recorded on another recorder, the DVD

recorder cannot play the disc if it was not finalized (page 42).

The disc does not start playback from the • Resume play was activated (page 49). Press STOP C button

beginning.

twice.

• You have inserted a disc whoseTitle menu or DVD menu

automatically appears on theTV screen when it is first insert.

The DVD recorder starts playing from the • The DVDVIDEO features an auto playback function.

disc automatically.

Some functions such as Stop, Search, or

Slow-motion Play cannot be performed.

• Depending on the disc, you may not be able to do some of the

operations above. See the instruction manual supplied with the

disc.

• Multilingual tracks are not recorded on the DVDVIDEO,

The language for the sound track cannot

be changed.

DVD-R or DVD-RW being played.

• The DVDVIDEO prohibits the changing of the language for the

sound track.

• Try changing the language using the DVDVIDEO's menu.

The subtitle language cannot be changed

or turned off.

• Multilingual subtitle are not recorded on the DVDVIDEO.

• The DVDVIDEO prohibits changing of the subtitles.

• Try changing the subtitle using the DVDVIDEO's menu.

• Multi-angles are not recorded on the DVDVIDEO being played.

• You are trying to change the angles when

appear on theTV screen (page 60).

• The DVDVIDEO prohibits changing angles.

• Try changing the angle using the DVDVIDEO's menu.

The angles cannot be changed.

icon does not

Recording/Timer recording/Editing

The channel cannot be changed from the

channel you are recording.

• Set theTV's input to "TV".

Recording does not start immediately

after you press REC button or REC/OTR

button.

• An unused DVD-R or DVD-RW was inserted. It takes a while

for the DVD recorder to automatically format a DVD-RW.

•There was a power failure during recording.

• The DVD recorder's internal clock stopped due to a power

failure that lasted for more than 30 seconds.

Reset the clock (pages 24-25).

Nothing was recorded even though you

set the timer setting correctly.

• Disconnect the AC power cord from the AC outlet, and

connect it again.

• The program contains copy protection signals that restricts

copying.

• The timer setting overlapped with another setting that was set

later or has priority.

Recording does not stop immediately

after you press STOP C button.

• It will take a few seconds for the DVD recorder to input disc

data before recording can stop.

Timer recording is not complete or did

not start from the beginning.

• The timer setting overlapped with another setting that was set

later or has priority (page 38).

• Disc space was not enough.

Others

Troubleshooting (cont’d)

Symptom

Remedy

Remote control

The remote contorl does not function.

• Batteries are weak.

• There are obstacles between the remote contorl and the DVD

recorder.

• The remote contorl is far from the DVD recorder.

• There are no batteries in the remote contorl.

• Turn on the DVD recorder.

• The remote contorl is not pointed at the remote sensor on the

DVD recorder.

Others

The DVD recorder does not operate

properly.

• When static electricity, etc., causes the DVD recorder to

operate abnormally, unplug the DVD recorder and then plug it

in again.

The disc tray does not open when you

press OPEN/CLOSE A button.

• It may take a few seconds for the disc tray to open after you

have recorded or edited a disc.

• This is because the DVD recorder is adding disc data to the

disc.

"Repairing" appears on the display.

• If there is a power failure or unplugging during recording,

finalizing, formatting or editing, a Repairing process will begin

automatically just after turning the DVD recorder on again.

It may take several minutes up to about four hours.

Repairing

Error message

Cause

Solution

Disc Error

--- Please eject the disc. ---

Playback feature may not be

available on this Disc.

Unplayable disc is inserted

in the DVD recorder.

Insert the standardized disc which

bear the marks on page 44.

Region Error

Playback is not authorized

because the region code of the

DVD video disc you inserted

is different.

Insert the DVD-Video disc with

region codes 1 or ALL.

--- Please eject the disc. ---

Playback is not authorized in your

region.

Parental Lock On

--- Please eject the disc. ---

The current selected parental level

Prohibits playback.

The current selected parental

level in the SETUP Menu

prohibits playback.

Check the "Parental Lock" setting

(pages 94-95).

Recording Error

The recording function encountered

the copy prohibited program.

You cannot record copy prohibited

programs.

This program is not allowed

to be recorded.

You are trying to record the copy-

once program onto the DVD-RW

disc inVideo mode or the DVD-R

disc.

Set "DVD-RW Recording Format"

to "VR mode" (page 30).

Recording Error

This program is not

recordable inVideo mode.

You are trying to record onto the

disc which is unrecordable, or the

disc status prevents recording.

Insert the recordable disc, and

ensure the disc status satisfies

the recording requirements

(pages 28-43).

Recording Error

Can not record on this disc.

You are trying to record a copy-

once program onto a DVD-RW

disc which is not compatible with

CPRM.

Insert a ver.1.1 CPRM compatible

DVD-RW disc (page 29).

Recording Error

This program is not allowed to

be recorded on this disc.

Recording Error

You are trying to record on to the

protected disc which is set in the

Disc Setting Menu.

Release the disc protect setting

in the Disc Setting menu (page 43).

This disc is protected and not

recordable.

Others

Troubleshooting (cont’d)

Error message

Cause

Solution

Recording Error

Disc is full.

You are trying to record onto

the disc which has no space

for recording.

Insert the recordable disc with

enough recording space.

(No area for new recording)

Recording Error

You are trying to record onto the

disc on which the number of

recording titles comes up to the

maximum (99).

Delete unnecessary titles

(pages 63, 67, 76).

You cannot record more

than 99 titles on one disc.

(The maximum is 99)

Recording Error

You cannot record more the

999 chapters on one disc.

You are trying to record onto the

VR mode DVD-RW disc on which

the number of recording chapters

comes up to the maximum (999).

Delete unnecessary chapter

markers (pages 71, 80).

(The maximum is 999)

Recording Error

This disc has no space to write

the Control Information when

recording or deleting contents.

Delete unnecessary titles

(pages 63, 67, 76).

You cannot record on this disc

as Control Information is full.

When editing has been repeatedly

performed, the control Information

area may come up to be full even

the recording area has enough space.

Recording Error

This disc's working area for

recording is full.

Insert a new disc.

You cannot record on the

disc as Power Calibration

Area is full.

When recordings are performed

repeatedly onto an unstable disc,

this area may come up to be full.

Recording Error

You are trying to record onto

the disc already finalized.

Release the finalizing for this disc

(page 42).

This disc is already finalized.

* If you are still having trouble with the DVD recorder after checkingTroubleshooting, write down the error code

and the error description for calling our help line mentioned on the front page to locate an Authorized service

center.

Others

Glossary

Analog audio

Dolby Digital

Regions code

An electrical signal that directly

represents sound. Compare this

to digital audio which can be an

electrical signal, but is an indirect

representation of sound. See also

Digital audio.

The system to compress digital

sound developed by Dolby

Laboratories. It offers you sound

of stereo(2ch) or multi-channel

audio (up to 5.1ch).

Regions associate discs and play-

ers with particular areas of the

world.This unit will only play discs

that have compatible region

codes.You can find the region

code of your unit by looking on

the rear panel. Some discs are

compatible with more than one

region (or all regions).

DTS (DigitalTheater System)

DTS is a 5.1 channel surround

sound system, but it is different

Aspect ratio

The width of a TV screen relative

to its height. Conventional TVs are from Dolby Digital.The formats

4:3 (in other words, the screen is

almost square); widescreen models System, Inc.

are 16:9 (the screen is almost

twice as wide as it is high).

Sampling frequency

were developed by Digital Theater

The rate which sound is measured

by a specified interval to turn into

digital audio data.The numbers of

sampling in one second defines as

sampling frequency.The higher the

rate, the better the sound quality

as possible as it is.

MP3 (MPEG Audio Layer 3)

MP3 is a method of compressing

files.You can copy MP3 files on

CD-R/RW discs from the comput-

er and play the files on this unit.

Chapter

Just as a book is split up into sev-

eral chapters, a title on a DVD

disc is usually divided into chap-

ters. See also Title.

Finalize

SAP

To make DVD discs, which have

been recorded on, possible to play

in DVD players.With this DVD

recorder, it is possible to finalize

(Secondary Audio Program)

Component video output

Each signal of luminance(Y) and

component(PB/CB, PR/CR) is inde-

pendent to output so that you can DVD-R/DVD-RW discs.

experience picture color as it is.

Sub-audio channel which is deliv-

ered separately from main-audio

channel.This audio channel is used

as an alternate in bilingual broad-

casting.

PCM

Also, due to compatibility with

(Pulse Code Modulation)

progressive video (525p/480p),

S-Video output

The most common system of

encoding digital audio, found on

you can experience higher-density

It delivers independently each sig-

nal of color(C) and luminance(Y)

to TV as video signals, so that

higher-quality picture will be

gained.

picture than that in interlace

CDs and DAT. Excellent quality,

(525i/480i).

but requires a lot of data com-

pared to formats such as Dolby

Digital and MPEG audio. For com-

patibility with digital audio

recorders (CD, MD and DAT) and A collection of chapters on DVD

AV amplifiers with digital inputs,

this unit can convert Dolby Digital

and MPEG audio to PCM. See also

Digital audio.

CPRM

(Content Protection for

Recordable Media)

CPRM is a copy protection sys-

tem with scramble system regard-

ing the recording of “copy-once”

broadcast programs (e.g. some

satellite broadcasts).

Title (DVD only)

disc. See also chapter.

Track

Audio CDs use tracks to divide

up the content of a disc.The DVD

equivalent is called a chapter. See

also Chapter.

Playlist

Digital audio

An indirect representation of

From this list you can play con-

tents of a disc as your desired

order or in sequence.Also it is

allowed to search a specific scene

directly.

sound by numbers. During record-

ing, the sound is measured at dis-

crete intervals (44, 100 times a

second for CD audio) by an ana-

log-to-digital converter, generating

a stream of numbers. On playback,

a digital-to-analog converter gen-

erates an analog signal based on

these numbers. See also Sampling

frequency and Analog audio.

VCR Plus+ system

Allows you to set a timer record-

ing by entering a PlusCode num-

ber found in participating TV list-

ings.

Progressive Scan (525p/480p)

A type of display that does not

split each frame into fields, and

instead scans directly through all

the scanlines of each frame in

order. Progressive Scan provides

less flickering and higher image

resolution than traditional

(525i/480i) TV signals.Refer to

page 13 for instructions on selec-

tive Progressive Scan mode.

100

Others

Specifications

General

System

DVD-Video, DVD-R/RW, CD-DA, CD-R/RW

Power requirements

Power consumption

Weight

AC120V, 60 Hz

23W (standby: 4.0W)

6.0 lbs ( 2.7 kg )

Dimensions (width x height x depth)

Operating temperature

Operating humidity

TV format

17 1/8" x 2 5/8" x 11 3/4" (435 x 66 x 297 mm)

41Fº to 104Fº (5ºC to 40ºC)

5% to 85% (no condensation)

NTSC

Recording

Recording format

Video Recording format (DVD-RW only),

Video format (DVD-RW, DVD-R)

Recordable discs

DVD-ReWritable, DVD-Recordable

Video recording format

Sampling frequency

13.5MHz

MPEG

Compression format

Audio recording format

Sampling frequency

48kHz

Dolby Digital

Compression format

Tuner

Receivable channels

VHF

2-13ch

UHF

CATV

14-69ch

C1-C125ch

Note:

The specifications and design of this product are subject to change without notice.

Language code

Language

Code

Language

Code

Language

Code

Language

Code

(Afan) Oromo

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali;Bangla

Bhutani

Bihari

Bislama

6159

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

5261

5256

Finnish

French

Frisian

5255

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

5861

5847

5868

Lingala

5860

5866

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

6149

6164

6247

6265

5247

6258

6266

6367

6459

6461

6467

6559

6553

6547

5350

6564

6554

6566

6660

6560

Sindhi

Singhalese

Siswat

6550

6555

6565

6557

6558

6561

5165

6567

6569

6568

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian

Occitan

Oriya

Panjabi

Pashto; Pushto

Persian

Polish

Portuguese

Quechua

Rhaeto-Romance

Romanian

Russian

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Hausa

Slovak

Slovenian

Somali

Spanish

Sundanese

Swahili

Swedish

Tagalog

Tajik

Hebrew

Hindi

Tamil

Tatar

Hungarian

Icelandic

Indonesian

Interlingua

Interlingue

Inupiak

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish

Turkmen

Twi

Ukrainian

Urdu

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Fiji

Irish

Italian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

Uzbek

Vietnamese

Volapuk

Welsh

Korean

Wolof

Kurdish

Laothian

Latin

Xhosa

Yiddish

Yoruba

Zulu

Latvian; Lettish

101

Español

Fácil grabación de DVD

Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.

Nota:

Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.

Paso 1: Elija un tipo de disco

Paso 2:

Coloque un

disco en blanco

Paso 3:

Seleccione la veloci-

dad de grabación

Hay varias tipos de discos DVD

grabables a su elección. Elija un tipo de

disco DVD que se pueda grabar según

sus necesidades de reproducción/

grabación/edición. Elija el tipo según

"Tipos de disco DVD" en esta página.

Este grabador de DVD puede

grabar en los siguientes tipos de

disco.

Para encender

PQRS

TUV

WXYZ

Para abrir

CLEAR

SPACE

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

Para cerrar

Mando a distancia

OPEN/

(o)

POWER

RETURN

SETUP

.@/:

ABC

DEF

VCR Plus

REC

SPEED

MONITOR

REC/OTR

* Esta unidad no puede grabar en los

discos siguientes.

SKIP

• DVD-R GeneralVer 2.0 / 8x

• DVD-RWVer 1.2 / 2-4x compatible

con CPRM

STOP

PLAY

REV

FWD

PAUSE

Por ejemplo, cuando desea grabar

repetidamente en el mismo disco o

cuando desea editar el disco

después de grabar, seleccione el

disco de tipo regrabable DVD-RW.

Cuando desea guardar

grabaciones sin alterarlos, un DVD

no regrabable DVD-R puede ser

más conveniente.

OPEN/

POWER

.@/:

ABC

DEF

VCR Plus

SP 2:01 Rem.

Cargando

Esta operación

puede demorar en

reconocerse.

Tipos de disco DVD

Formato del disco

: Más adecuado

: Puede utilizar

Algunas funciones son limitadas

: No puede utilizar

Coloque el disco en el

grabador. Haga el formato del

disco del menú SETUP,

existen los formatos de video

(modo deVideo) o de

Desea

Grabar programas deTV

DVD-RW VR

DVD-RW Video

DVD-R

Volver a utilizar borrando partes no deseadas

Editar las grabaciones

Editar/grabar de equipos conectados

Copiar discos para distribución

Reproducir en otro equipo de DVD

grabación de video (modo

VR) según el tipo de disco

colocado. Esto es necesario

para preparar el disco

para grabación.Vea los

detalles en las páginas 30-

32.

Detalles

Grabación

¿Regrabable?

DVD-RW VR

DVD-RW Video

DVD-R

Sí

Puede crear capítulos a intervalos fijos (auto.)

Puede crear capítulos donde desee (manual)

Puede grabar imágenes de tamaño 16:9

Sí

* Al formatear, todo el

contenido de ese disco se

borrarán.

Puede grabar un programa de Copia-una-vez

Edición

Puede hacer funciones de edición básica

Sí

Puede hacer funciones de edición avanzadas (edición de lista a reproducir)

El DVD-RW (modoVR) sólo puede

reproducirse en equipos de DVD compatibles

conVR.

Nota:

Para más detalles sobre las funciones anteriores y las

limitaciones implícitas, lea las explicaciones en este manual.

102

Español

Fácil grabación de DVD (cont.)

Paso 4:

Seleccione el

canal deseado

Paso 5:

Grabe en discos

DVD

Paso 6:

Pare la grabación

REC

SPEED

MONITOR

REC/OTR

MENU/LIST

TOP MENU

SKIP

OPEN/

POWER

STOP

PLAY

REV

FWD

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

PAUSE

RETURN

SETUP

PQRS

CLEAR

TUV

REC

MONITOR

REC

SPEED

SPACE

REC/OTR

58%

SKIP

REPEAT CM SKIP

ZOOM DISPLAY

Escrit de datos

STOP

PLAY

SKIP

STOP

REV

PLAY

FWD

CH 1

Esta operación puede

demorar en completarse.

Sugerencia 1: Reproduzca el contenido grabado

Inicio de grab.

Parada/inicio

Parada grab.

Puede seleccionar el título que desea reproducir de un menú indica-

do y empiece a reproducir inmediatamente. Las grabaciones pueden

verse fácilmente en un disco, el procedimiento es simple ya que sólo

tiene que elegir el título en un capítulo de la pantalla del menú.

Título 1

Título 2

¿Qué son títulos y capítulos?

La grabaciones del disco DVD se dividen generalmente en títulos.

Los títulos pueden subdividirse en capítulos.

Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2

Sugerencia 2: Edite el disco grabado

La edición de discos puede ser muy fácil y el grabador de DVD ofrece convenientes funciones de edición

posibles sólo con los DVD-R/RW.

Puede editar lo siguiente de la lista de títulos.

• Poniendo nombres en títulos

• Seleccionando imágenes para índices (modoVR)

• Seleccionando/borrando marcadores de capítulos

• Borrado de partes de títulos o escenas (ModoVR)

Title Delete: Esto borra permanentemente una escena completa del disco.

Scene Delete: Esto permite que el usuario edite dentro de una escena específica (anuncios comerciales, por ejemplo).

Original y Playlist (modoVR)

Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones originales. Cualquier lista a

reproducir no ocupa mucho espacio en el disco.

¿Qué significa "Original" o "Playlist"?

A lo largo de este manual encontrará Original y Playlist que se refieren a las grabaciones reales y la versión edi-

tada.

• La grabación Original se refiere a la grabación real en el disco.

• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir la versión Original.

Finalización de un disco

• Esto permitirá que un disco que se grabe en nuestra unidad pueda ser reproducido en un reproductor

DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.

•

Después de finalizar un disco, si la grabación se hizo en el modo de vídeo, usted no podrá editar ninguna infor-

mación que se encuentre en ese disco.

• Si ha grabado en el modoVR en un disco DVD-RW, la edición podrá realizarse incluso después de la

finalización.

103

Français

Enregistrement simple de DVD

Ce qui suit permettra de comprendre facilement comment enregistrer sur des disques DVD.

Remarque :

Vérifier la présence de piles dans la télécommande et le raccordement correct de cet appareil et du téléviseur.

Étape 1 :

Étape 2 :

Étape 3 :

Insérer un

disque vierge

Choisir un type de disque

Sélectionner la

vitesse d’enre-

gistrement

Il y a plusieurs types de disques DVD

enregistrables. Choisir un type de disque

DVD enregistrable sur la base de ses propres

besoins de lecture/enregistrement/montage.

Voir “Types de disque DVD” au bas de cette

page pour les détails sur les différences entre

les divers genres de supports compatibles.

Cet appareil peut enregistrer sur les

types de disques suivants.

Mettre l’appareil sous ten-

sion.

Ouvrir le tiroir à

PQRS

TUV

WXYZ

disque.

CLEAR

SPACE

Fermer le tiroir à

REPEAT CM SKIP

MENU/LIST

ZOOM DISPLAY

TOP MENU

disque.

Télécommande

OPEN/

(ou)

POWER

RETURN

SETUP

.@/:

ABC

DEF

VCR Plus

*Cet appareil ne peut pas enregistrer

sur les disques suivants.

• DVD-RWVer 1.2/2-4x compatible

CPRM

• DVD-R ordinaireVer 2.0/8x

REC

SPEED

MONITOR

REC/OTR

SKIP

STOP

PLAY

REV

FWD

PAUSE

Par exemple, pour enregistrer à

répétition sur le même disque, ou

pour éditer le disque après l’enre-

gistrement, sélectionner un disque

de type DVD-RW réinscriptible.

OPEN/

POWER

.@/:

ABC

DEF

VCR Plus

SP 2:01 Rem.

Cargando

Pour sauvegarder des enregistre-

ments sans aucune modification,

un DVD-R non-inscriptible peut

faire l’affaire.

La reconnaissance de

cette opération peut

exiger un certain temps.

Types de disques DVD

Formatage du disque

Insérer le disque dans

l’appareil. Puis, formater le

disque au menu

CONFIGURER. Le format

Vidéo (modeVidéo) ou le

format d’enregistrement

vidéo (modeVR) sera

disponible selon le type de

disque inséré. Cela est

nécessaire pour préparer le

disque pour l’enregistre-

ment.Voir les détails aux

pages 30-32.

104

Français

Enregistrement simple de DVD

Étape 4 :

Sélectionner la

chaîne souhaitée

Étape 5 :

Étape 6 :

Arrêter l’enreistre-

ment.

Enregistrer sur

des disques DVD

REC

MONITOR

REC

MENU/LIST

TOP MENU

SPEED

REC/OTR

SKIP

OPEN/

POWER

STOP

PLAY

.@/:

GHI

ABC

JKL

DEF

MNO

WXYZ

VCR Plus

REV

FWD

PAUSE

RETURN

SETUP

PQRS

CLEAR

TUV

REC

MONITOR

REC

SPEED

SPACE

REC/OTR

SKIP

REPEAT CM SKIP

ZOOM DISPLAY

58%

STOP

PLAY

Escrit de datos

SKIP

STOP

REV

PLAY

FWD

CH 1

Cette opération peut

demander un certain

temps.

Conseil 1: Lire le contenu enregistré

Démarrer enr.

Arrêt/Démarrer

Titre 2

Arrêter enr.

Le titre à lire peut être sélectionné au menu affiché, et la lecture

peut commencer immédiatement. Le contenu enregistré est très

accessible sur un disque, la procédure est vraiment simple,

comme si on choisissait un titre de chapitre à l’écran de menu.

Titre 1

Qu’est-ce que titres et chapitres?

Les matériaux du disque DVD sont généralement divisés en

plusieurs titres. Les titres peuvent encore être subdivisés en

chapitres.

Chapitre 1 Chapitre 2 Chapitre 3 Chapitre 1 Chapitre 2

Conseil 2: Monter le disque enregistré

Le montage des disques est très simple; cet appareil offre des fonctions de montage pratiques, utilisables seule-

ment avec les disques DVD-R/RW.

Ce qui suit peut être monté à partir d’une liste de titres.

• Dénomination de titres

• Réglage d’images pour les images miniatures (modeVR)

• Réglage/suppression de marques de chapitres

• Suppression de parties de titres (modeVR)

Suppression de titre : Supprime de façon permanente toute une scène du disque.

Suppression de scène : Permet à l’utilisateur le montage à l’intérieur d’une scène spécifique (par ex. publicité).

Original et Playlist (modeVR)

Il est possible de monter les enregistrements dans la Playlist sans changer les enregistrements originaux. Une

Playlist n’utilise pas beaucoup d’espace du disque.

À quoi servent “Original” ou “Playlist”?

Dans ce manuel, Original et Playlist seront utilisés pour référer aux matériaux réels et à la version montée.

•

Les matériaux Original réfèrent à ce qui est réellement enregistré sur le disque.

• Les matériaux Playlist réfèrent à la version montée du disque; comment les matériaux Original

seront lus.

Finalisation d’un disque

• Permet la lecture d’un disque enregistré sur cet appareil sur un lecteur de DVD différent – sans finali-

sation, la lecture sur un autre lecteur est impossible.

• Après la finalisation d’un disque, si l’enregistrement a été fait en mode vidéo, il sera imposible de mon-

ter toute information sur ce disque.

• En cas d’enregistrement en modeVR sur un disque DVD-RW, le montage est encore possible après la

finalisation.

105

MEMO

106

MEMO

107

LIMITED WARRANTY

FUNAI CORP. will repair this FUNAI product, free of charge in the USA in the event of defect in materials

or workmanship as follows:

DURATION:

PARTS:

LABOR:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are

excluded from this warranty.

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of origi-

nal retail purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This FUNAI Limited warranty does

not apply to any product not purchased and used in the United States.

This product is produced for home use and this warranty only covers failures due to defects in material or

workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or fail-

ures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which

results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper

maintenance, commercial use such as hotel, rental or office use of this product or damage which results

from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT

REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR

MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY

THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART

OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST

BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID

WHEN THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest FUNAI Authorized Service Center or for general service proce-

dure, please call 1-800-605-8453 or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-605-8453

http://www.funai.us

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

1VMN20268 / E6550UD ★★★★★

Printed in China

HP Hewlett Packard Hewlett Packard Computer Monitor L1740 17amp;quot; User Manual
Gateway Memory Card Reader User Manual
Fisher Paykel MR850 User Manual
Electrolux 922091 User Manual
Dacor Cooktop RGC365 User Manual
Califone Kids Computer Peripheral Package KIDSPACK User Manual
BT Lyric 1100 User Manual
Black Box Computer Hardware ACX288 CTL User Manual
AT T E5804 User Manual
Asus P5GD1 VM User Manual