User’s manual
E5804
5.8 GHz cordless
telephone with caller
ID/call waiting
You must install and charge
the battery before using the
telephone.
See page 7
for easy instructions.
STOP!
For customer service or product information, visit our website
In Canada dial 1 (866) 288-4268.
CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read
and follow these instructions carefully:
ƨꢀ ꢁ‘ƒꢀŒŠ—ꢀ’†ƒꢀ‘“ŽŽŠ‡ƒ‚ꢀƒ†ꢂƒ€Šƒꢀ€’’ƒ—ꢀꢀƒŽŠƒ‹ƒŒ’ꢀ€’’ƒ—ꢀǎǐǎǎꢀƪꢃꢄꢁꢀǎǏǐnjǎƐꢀŽ’ꢀŒ“‹€ƒꢀ
89-0047-00-00) or equivalent. To order a replacement battery, visit our
In Canada dial 1 (866) 288-4268.
ƨꢀ ꢅꢀŒ’ꢀ‚‡‘Ž‘ƒꢀ„ꢀ’†ƒꢀ€’’ƒ—ꢀ‡Œꢀꢀ„‡ƒƓꢀꢆ‡‰ƒꢀ’†ƒꢀ€’’ƒ‡ƒ‘ꢀ„ꢀ’†‡‘ꢀ’—ŽƒƐꢀ‡’ꢀ“Š‚ꢀƒ–ŽŠ‚ƒꢀ‡„ꢀ€“Œƒ‚Ɠꢀꢇ†ƒ‰ꢀ
with local codes for special disposal instructions.
ƨꢀ ꢅꢀŒ’ꢀŽƒŒꢀꢀ‹“’‡Š’ƒꢀ’†ƒꢀ€’’ƒ—ƓꢀꢈƒŠƒ‘ƒ‚ꢀƒŠƒ’Š—’ƒꢀ‡‘ꢀ‘‡”ƒꢀŒ‚ꢀ‹—ꢀ“‘ƒꢀ‚‹ꢂƒꢀ’ꢀ’†ƒꢀ
ƒ—ƒ‘ꢀꢀ‘‰‡ŒƓꢀꢉ’ꢀ‹—ꢀ€ƒꢀ’–‡ꢀ‡„ꢀ‘•ŠŠ•ƒ‚Ɠ
ƨꢀ ꢊ–ƒ‡‘ƒꢀƒꢀ‡Œꢀ†Œ‚Š‡Œꢂꢀ€’’ƒ‡ƒ‘ꢀ‡Œꢀ‚ƒꢀŒ’ꢀ’ꢀƒ’ƒꢀꢀ‘†’ꢀ‡“‡’ƓꢀꢅꢀŒ’ꢀŠŠ•ꢀŒ‚“’‡”ƒꢀ‹’ƒ‡-
als such as rings, bracelets, or keys to touch the battery. The battery or conductor may overheat and
cause harm.
ƨꢀ ꢇ†ꢂƒꢀ’†ƒꢀ€’’ƒ—ꢀŽ”‡‚ƒ‚ꢀ•‡’†ꢀꢀ‡‚ƒŒ’‡„‡ƒ‚ꢀ„ꢀ“‘ƒꢀ•‡’†ꢀ’†‡‘ꢀŽ‚“’ꢀŒŠ—ꢀ‡Œꢀ‚Œƒꢀ•‡’†ꢀ’†ƒꢀ
instructions and limitations specified in this manual.
ƨꢀ ꢋ€‘ƒ”ƒꢀŽŽƒꢀŽŠ‡’—ꢀ‡ƒŒ’’‡Œꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀ€’’ƒ—ꢀŒ‚ꢀ€’’ƒ—ꢀ†ꢂƒƓ
ƨꢀ ꢅꢀŒ’ꢀ‚‡‘‘‘ƒ‹€Šƒꢀ—“ꢀ’ƒŠƒŽ†ŒƒƓꢀꢌ†ƒƒꢀƒꢀŒꢀ“‘ƒƕ‘ƒ”‡ƒ€ŠƒꢀŽ’‘ꢀ‡Œ‘‡‚ƒƓꢀꢈƒ„ƒꢀ’ꢀ“Š‡-
fied service personnel for servicing.
User’s manual
E5804
5.8 GHz cordless
telephone with caller
ID/call waiting
Table of contents
Getting started
Caller ID summary
Quick reference guide.........................2
Parts checklist.........................................4
Telephone base installation.............5
Battery installation & charging......7
Installation options...............................8
Belt clip & optional headset.........10
ꢇŠŠƒꢀꢉꢅꢀ‘“‹‹—..............................24
To review the call summary.........27
ꢅƒŠƒ’ƒꢀŠŠꢀ‘“‹‹—ꢀƒŒ’‡ƒ‘ ........28
Add entries to the directory.........29
Appendix
Screen icons, indicator
lights & tones...................................30
Handset display screen messages......31
Troubleshooting...................................32
Important safety instructions.......38
ꢍꢇꢇꢀꢎ’ꢀǒǔꢀſꢀɇꢇꢌɇ..........................41
ꢍꢇꢇꢀꢎ’ꢀǍǑ............................................43
ꢆ‡‹‡’ƒ‚ꢀ•Œ’—.................................44
Technical specifications..................47
ꢉŒ‚ƒ–..........................................................48
Telephone operation
Settings....................................................11
Basic operation....................................14
ꢋŽ’‡Œ‘ꢀ•†‡ŠƒꢀŒꢀŠŠ‘.....................17
Directory
ꢅ‡ƒ’—..................................................18
Speed dial...............................................19
New directory entries.......................20
ꢅ‡ƒ’—ꢀ‘ƒ†..................................22
To change or dial entries...............23
1
Getting started
Quick reference guide
Cordless handset
CID/-VOLUME
DIR /VOLUME+
While in a menu, press to scoll
down. When in idle mode, press
to display call summary entries
(page 27). While entering names
or numbers, press to move the
“‘ꢀ ’ꢀ ’†ƒꢀ Šƒ„’Ɠꢀ ꢅ“‡Œꢂꢀ ꢀ ŠŠƐꢀ
press CID to decrease listening
volume.
While in a menu, press to scoll
up. When in idle mode, press to
display directory entries (page 22).
While entering names, press to
‚”Œƒꢀ’†ƒꢀ“‘Ɠꢀꢅ“‡ŒꢂꢀꢀŠŠƐꢀ
press DIR
to increase listening
volume.
OFF/CLEAR
PHONE/FLASH
ꢅ“‡ŒꢂꢀꢀŠŠƐꢀŽƒ‘‘ꢀ’ꢀ†Œꢂꢀ“ŽƓ
While using menus, press to can-
ƒŠꢀŒꢀŽƒ’‡ŒƐꢀꢀƒ–‡’ꢀ’†ƒꢀ‹ƒŒ“ꢀ
(page 12).
Press to make or answer a call.
ꢅ“‡Œꢂꢀ ꢀ ŠŠƐꢀ Žƒ‘‘ꢀ ’ꢀ ƒƒ‡”ƒꢀ
an incoming call if call waiting is
activated (page 17).
CHAN/DELETE
MENU/SELECT
Press to display menu. Press to
store a programming option.
When on a call, press CHAN/DELETE
to scan for a clearer channel
when there is static or inter-
ference on the line (page 17).
ꢔ†ƒŒꢀ ‡Œꢀ ŠŠƒꢀ ꢉꢅꢀ ‹‚ƒƐꢀ Žƒ‘‘ꢀ
to delete the displayed caller
ꢉꢅꢀ ƒŒ’—ꢀ ƪŽꢂƒꢀ ǎǔƫƐꢀ ꢀ press
and holdꢀ ’ꢀ ‚ƒŠƒ’ƒꢀ ŠŠꢀ ŠŠƒꢀ ꢉꢅꢀ
entries (page 28).
MUTE
While on a call, press to mute
microphone. Press again to resume
(page 17).
SPEAKER
REDIAL/PAUSE
Press to activate handset speak-
erphone. Press again to resume
normal handset use (page 14).
While in idle mode, press to display
last number called (page 15). While
dialing or entering numbers to the
directory, press to insert a four-sec-
ond dialing pause (page 21).
Feature menu
Feature menu
Using menus
ꢀꢀꢅꢉꢈꢊꢇꢌꢋꢈꢏ
ꢅꢉꢈꢊꢇꢌꢋꢈꢏ ..............Page 18
ꢃꢎꢊꢊꢅꢀꢅꢉɇꢆ .............Page 19
ꢈꢉꢐꢑꢊꢈꢀ......................Page 12
ꢅɇꢌꢊƤꢌꢉꢒꢊ ...............Page 12
ꢅꢉɇꢆꢀꢒꢋꢅꢊ..............Page 11
ꢇꢆꢈꢀꢓꢋꢉꢇꢊꢀꢒɇꢉꢆ....Page 13
ꢆɇꢐꢑꢁɇꢑꢊ ..............Page 11
Press
through menu items.
CID or DIR
to scroll
Press MENU/SELECT to select or
modify a highlighted item.
Press
OFF/CLEAR to cancel an
Žƒ’‡ŒƐꢀ ꢀ ƒ–‡’ꢀ ’†ƒꢀ ‹ƒŒ“ꢀ ‚‡‘-
play.
2
Getting started
Quick reference guide
Telephone base
VOICEMAIL
Flashes when there is new voicemail
(requires voicemail service from your
local telephone company).
CHARGE/IN USE
HANDSET LOCATOR
Press to make the handset beep when
the handset is not on the telephone
€‘ƒꢀƪŽꢂƒꢀǍǒƫƓ
ƨꢀ ꢋŒꢀ•†ƒŒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‡‘ꢀŽŽƒŠ—ꢀŽ‘‡’‡Œƒ‚ꢀ
to charge in the telephone base.
ƨꢀ Flashes quickly while an incoming call is ringing.
3
Getting started
Parts checklist
Save your sales receipt and original packaging in case you need to ship your
telephone for warranty service.
ꢇ†ƒ‰ꢀ’ꢀ‹‰ƒꢀ‘“ƒꢀ’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŽ‰ꢂƒꢀ‡ŒŠ“‚ƒ‘ꢀ’†ƒꢀ„ŠŠ•‡ŒꢂƓꢀꢌ†ƒꢀ‹‚ƒŠꢀ
number of your telephone can be found on the label located on the bottom
of the telephone base.
User’s manual
Quick start guide
E5804
E5804
5.8 GHz cordless
Telephone with caller
ID/call waiting
5.8 GHz cordless
Telephone with caller
ID/call waiting
User's manual
Quick start guide
ꢇ‚Šƒ‘‘ꢀꢀꢀ†Œ‚‘ƒ’
Telephone base
Battery for cordless handset
Battery compartment door
Power adapter for
telephone base
Belt clip for cord-
less handset
Telephone line cord
4
Getting started
Telephone base installation
ꢇ†‘ƒꢀꢀƒŒ’ŠꢀŠ’‡ŒꢀŠ‘ƒꢀ’ꢀꢀ’ƒŠƒŽ†Œƒꢀˆ‰ꢀŒ‚ꢀꢀŽ•ƒꢀ“’Šƒ’ꢀŒ’ꢀ
connected to a wall switch. The telephone base can be placed on a flat sur-
face or mounted on a standard wall plate. For optimum range and better
reception, place the telephone base in a high and open location.
Avoid placing the telephone base too close to:
ƨꢀ ꢇ‹‹“Œ‡’‡Œꢀ ‚ƒ”‡ƒ‘ꢀ ‘“†ꢀ ‘ƒꢀ Žƒ‘ŒŠꢀ ‹Ž“’ƒ‘Ɛꢀ ‹Ž“’ƒꢀ “’ƒ‘Ɛꢀ
’ƒŠƒ”‡‘‡Œꢀ‘ƒ’‘Ɛꢀꢓꢇꢈ‘Ɛꢀ•‡ƒŠƒ‘‘ꢀ“’ƒ‘ꢀƪ•‡ƒŠƒ‘‘ꢀ€‚€Œ‚Ɛꢀ•‡ƕ„‡ƐꢀꢀǔnjǎƓǍǍƫꢀ
or other cordless telephones.
ƨꢀꢀꢊ–ƒ‘‘‡”ƒꢀ†ƒ’ꢀ‘“ƒ‘Ɠ
ƨꢀꢀꢐ‡‘ƒꢀ ‘“ƒ‘ꢀ ‘“†ꢀ ‘ꢀ ꢀ •‡Œ‚•ꢀ •‡’†ꢀ ’„„‡ꢀ “’‘‡‚ƒƐꢀ ‹’‘Ɛꢀ ‹‡•”ƒꢀ
ovens, refrigerators, or fluorescent lighting.
ƨꢀꢀꢊ–ƒ‘‘‡”ƒꢀ‚“‘’ꢀ‘“ƒ‘ꢀ‘“†ꢀ‘ꢀꢀ•‰‘†ŽꢀꢀꢂꢂƒƓ
ƨꢀꢀꢊ–ƒ‘‘‡”ƒꢀ‹‡‘’“ƒƓ
ƨꢀꢀꢊ–’ƒ‹ƒŠ—ꢀŠ•ꢀ’ƒ‹Žƒ’“ƒƓ
ƨꢀꢀꢒƒ†Œ‡Šꢀ”‡€’‡Œꢀꢀ‘†‰ꢀ‘“†ꢀ‘ꢀŒꢀ’Žꢀ„ꢀ’†ƒꢀ•‘†‡Œꢂꢀ‹†‡Œƒꢀꢀ
work bench.
5
Getting started
Telephone base installation
1. Plug the small end of
the larger power adapter
into the power jack at
the bottom of the tele-
phone base.
2. Plug one end of the
telephone line cord into
the telephone jack at the
bottom of the telephone
base.
3.ꢀꢈ“’ƒꢀ‚‘ꢀ’†“ꢂ†ꢀ
slots.
5. Plug the other end
of the telephone line
cord into a telephone
jack.
4. Plug the large end of
the larger power adapter
into an electrical outlet
not controlled by a wall
switch.
Telephone line cord
ꢅꢃꢆꢀ„‡Š’ƒꢀ
ƪꢋŽ’‡ŒŠꢀ„ꢀꢅꢃꢆꢀ“‘ƒ‘Ɛꢀ
see number four in the
note section, below.)
NOTES:
1. Use only the power adapter supplied with this product or equivalent. To order a replace-
or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
2. Be sure to use an electrical outlet not controlled by a wall switch.
3. This power adapter is intended to be correctly oriented in a vertical or floor mount position.
ǐƓꢀ ꢉ„ꢀ—“ꢀƒƒ‡”ƒꢀ†‡ꢂ†ꢀ‘Žƒƒ‚ꢀ‡Œ’ƒŒƒ’ꢀ’†“ꢂ†ꢀ—“ꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀƪ‹‹ŒŠ—ꢀƒ„ƒƒ‚ꢀ’ꢀ‘ꢀꢅꢃꢆƫƐꢀŒ‚ꢀ
—“ꢀƒꢀƒ–Žƒ‡ƒŒ‡Œꢂꢀ‡Œ’ƒ„ƒƒŒƒꢀ‚“‡Œꢂꢀ’ƒŠƒŽ†ŒƒꢀŒ”ƒ‘’‡Œ‘ꢀŒ‚Ƥꢀ—“ꢀŠŠƒꢀꢉꢅꢀ„ƒ’“ƒ‘ꢀ
ƒꢀŒ’ꢀ„“Œ’‡Œ‡ŒꢂꢀŽŽƒŠ—Ɛꢀ‡Œ‘’ŠŠꢀꢀꢅꢃꢆꢀ„‡Š’ƒꢀ’ꢀ’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ
Œ‚ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ•ŠŠꢀˆ‰ƓꢀꢇŒ’’ꢀ—“ꢀꢅꢃꢆꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒꢀ„ꢀꢀꢅꢃꢆꢀ„‡Š’ƒƓꢀ
ǒ
Getting started
Battery installation & charging
After installing the battery, you may be able to make or receive short calls. For
€ƒ‘’ꢀ Žƒ„‹ŒƒƐꢀ ŽŠƒꢀ ’†ƒꢀ †Œ‚‘ƒ’ꢀ ‡Œꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ €‘ƒꢀ ’ꢀ †ꢂƒꢀ „ꢀ Ǎǒꢀ
hours before use.
You can keep the battery charged by returning the handset to the telephone
base after use. When the battery is fully depleted, a recharge takes about 12
hours. The average talk time on a fully charged battery is about five hours, and
’†ƒꢀ‘’Œ‚€—ꢀ’‡‹ƒꢀ‡‘ꢀŽŽ–‡‹’ƒŠ—ꢀ‘‡–ꢀ‚—‘Ɠꢀɇ’“Šꢀ€’’ƒ—ꢀŠ‡„ƒꢀ‚ƒŽƒŒ‚‘ꢀŒꢀ“‘ꢂƒꢀ
conditions and age of battery.
1. Insert the plug as indicated.
Be sure to securely insert
the plug, making sure that it
matches the color-coded label
inside the battery compartment.
2. Place the battery
and wires inside the
compartment.
3. Slide the battery
compartment cover
up until it clicks.
To replace the battery,
press in and downward
on the tab of the bat-
tery compartment to
open the battery com-
Ž’‹ƒŒ’ꢀ ”ƒƓꢀ ꢆ‡„’ꢀ
out the old battery
and disconnect it from
the handset. Follow
the instructions on
this page to install and
charge the new battery.
4. You may be able to make or receive
short calls. For best performance, place
the handset in the telephone base to
†ꢂƒꢀ„ꢀ’ꢀŠƒ‘’ꢀǍǒꢀ†“‘ꢀ€ƒ„ƒꢀ„‡‘’ꢀ
use.
"!44%29ꢀ,/7
.%%$3ꢀ2%#(!2').'
then
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
Battery low indicator
ꢈƒ’“Œꢀ ’†ƒꢀ †Œ‚‘ƒ’ꢀ ’ꢀ ’†ƒꢀ
telephone base to recharge
when this symbol flashes and
the handset beeps or when
the handset screen displays
NEEDS RECHARGING.
NOTE: Under normal conditions, the
battery should last around one year. This
may vary depending on usage.
Caution: Use only the supplied rechargeable battery, replacement battery 2422 (SKU 23402, part
number 89-0047-00-00) or equivalent. To order a replacement battery, visit our
Canada dial 1 (866) 288-4268.
7
Getting started
Installation options
NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions.
Tabletop mount
Wall mount
Telephone outlet
mounting plate
with mounting
studs
Wall mounting
The telephone base comes with the bracket mounted for tabletop use. If wall
mounting is desired, a telephone outlet wall mounting plate with mounting studs is
required. This mounting plate with studs may be available for purchase from many
hardware or consumer electronics retailers and may require professional installation.
1. To remove the bracket, hold the telephone
base in both hands, press the two bracket
tabs and lift the bracket away from slots
ǎƓꢀ ꢇŒŒƒ’ꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ Š‡Œƒꢀ ‚ꢀ Œ‚ꢀ Ž•ƒꢀ
adapter to the jacks on the bottom of the
telephone base. Bundle the telephone cord,
and secure it with a twist tie before placing it
inside the bracket.
and
.
8
Getting started
Installation options
3. To attach the bracket for wall mounting, insert
the tabs of the bracket into slots
the telephone base, then press the other bracket
tabs into slots and as shown on the right.
and
on
4. Plug the power adapter into an electrical outlet
not controlled by a wall switch. Plug the telephone
line cord into a telephone wall jack. To mount the
telephone on the wall, position the mounting holes
and
over the telephone outlet mounting studs.
Press and slide the bracket down firmly so the
telephone is held securely on the telephone outlet
mounting studs.
Telephone outlet mounting studs
Tabletop mounting
To return the bracket from the wall mount to tabletop position, follow the
directions below.
ǍƓꢀ ꢈƒ‹”ƒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ„‹ꢀ’†ƒꢀ•ŠŠƓꢀꢁŒŽŠ“ꢂꢀ
’†ƒꢀ‚‘ꢀ„‹ꢀ’†ƒꢀ•ŠŠꢀˆ‰‘Ɠꢀꢈƒ‹”ƒꢀ’†ƒꢀ€‰ƒ’ꢀ
from the telephone base.
2. Insert the bracket tabs into slots
and on the telephone base, then
press the other bracket tabs into
slots and
.
ǏƓꢀꢀꢈ“’ƒꢀ‚‘ꢀ’†“ꢂ†ꢀ‘Š’‘ƓꢀꢎŠ“ꢂꢀ’†ƒꢀ’†ƒꢀƒŒ‚ꢀ
of the telephone line cord into a telephone
wall jack. Plug the large end of the larger
power adapter into an electrical outlet not
controlled by a wall switch.
9
Getting started
Belt clip & optional headset
Install belt clip as shown below if desired.
Snap belt clip
into notches
on both sides
of handset.
To release belt clip
from handset, lift one
side of the belt clip
out of the notch.
For hands-free telephone conversations, use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm
headset. To order an AT&T 2.5 mm headset, visit our website at
dial 1 (866) 288-4268.
Plug 2.5 mm headset into
the jack on the side of hand-
set (beneath small rubber
cap).
NOTE: If the sound quality of the
headset is not good, try unplugging it,
and firmly plugging it in again.
10
Telephone operation
Settings
Use the MENU/SELECT to change the handset set-
tings. Follow the steps below to program the cordless
handset. To stop at any time, press OFF/CLEAR.
Language
The default language for the handset screen
displays is English. To change the language to
Espanol, or Francais:
,!.'5!'%
1. Press MENU/SELECT.
2. Press CID or DIR
until the screen displays
LANGUAGE
.
3. Use MENU/SELECT to change the current set-
ting.
4. Press CID or DIR ꢀ’ꢀ†‘ƒꢀ‹Œꢂꢀꢊꢐꢑꢆꢉꢃ Ɛꢀ
ꢍꢈɇꢐꢇɇꢉꢃƐꢀꢀꢊꢃꢎɇꢐꢋꢆƓ
5. Press MENU/SELECT to confirm your selection
Œ‚ꢀƒ–‡’Ɠ
Choose dial mode
The dial mode defaults to tone. If you do not have
touch tone service, you’ll need to change the set-
ting to pulse:
$)!,ꢀ-/$%ꢃꢀ4/.%
1. Press MENU/SELECT.
2. Press CID or DIR
until the screen displays
DIAL MODE: and the current setting.
3. Use MENU/SELECT to change the current setting.
4. Press CID or DIR
to display TONE or PULSE.
5. Press MENU/SELECT to confirm your selection
Œ‚ꢀƒ–‡’Ɠ
11
Telephone operation
Settings
Selectable ringer melodies
1. Press MENU/SELECT to begin programming.
2).'%2ꢃꢀꢁ
2. Press CID or DIR
until the screen displays
RINGER: and the current setting.
3. Use MENU/SELECT to change the current setting.
4. Press CID or DIR
to display 1, 2, 3, 4 or OFF.
You will hear a sample of each ringer sound.
5. Press MENU/SELECT to choose displayed ringer
$!4%ꢆ4)-%
ꢁꢂꢃꢂꢄ
‘“Œ‚ꢀŒ‚ꢀƒ–‡’Ɠ
ꢂꢅꢆꢁꢇ
NOTE: If you choose OFF, the cordless handset ringer will
be turned off, and the screen will display RINGER OFF and
when the cordless handset is idle (not in use). If there are any
un-reviewed calls, the screen will display XX MISSED CALLS
and
instead of RIGNER OFF and
.
Set cordless handset display date and time
NOTES:
1. Press MENU/SELECT to begin programming.
1. You can choose to set the time
manually, or you can allow it
to be set automatically with
‡Œ‹‡ŒꢂꢀŠŠƒꢀꢉꢅꢀ‡Œ„‹’‡ŒƓꢀ
The time will be set automati-
cally only if you subscribe to
ŠŠƒꢀ ꢉꢅꢀ ‘ƒ”‡ƒꢀ Ž”‡‚ƒ‚ꢀ €—ꢀ
your local telephone company
(page 24).
2. Press CID or DIR
until the screen displays
DATE/TIME
.
3. Press MENU/SELECT to view or set date and
time.
4. Press CID or DIR
to change the month in the
date and time line at the bottom of the display,
then press MENU/SELECT.
ǎƓꢀꢀꢀꢇŠŠƒꢀꢉꢅꢀ•‡ŠŠꢀŒ’ꢀ‘ƒ’ꢀ’†ƒꢀ—ƒƓꢀ
ǑƓꢀꢈƒŽƒ’ step four to set day, hour, minute, and
ɇꢒƤꢎꢒƓ
ǒƓꢀꢎƒ‘‘ MENU/SELECT ’ꢀ‘”ƒꢀ‘ƒŠƒ’‡ŒꢀŒ‚ꢀƒ–‡’Ɠ
12
Telephone operation
Settings
Choose ringer volume setting
1. Press and hold CID or DIR
when the cordless
2).'%2ꢀ6/,ꢃꢀ,/7
handset is idle (not in use). This feature allows you
to choose low, med, high ringer volume or turn
the ringer off.
2. Press CID or DIR
to choose the desired option.
You will hear a sample of each ringer volume.
3. Press MENU/SELECT to choose blinking ringer
”Š“‹ƒꢀŒ‚ꢀƒ–‡’Ɠ
.%7ꢀ6/)#%ꢀ-!),
NOTE: If you choose OFF, the handset ringer will be
turned off, and the screen will display RINGER OFF and
when the handset is idle (not in use). If there are any un-
reviewed calls, the screen will display XX MISSED CALLS and
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
instead of RIGNER OFF and
.
Clear voicemail indication
If you subscribe to voicemail services provided
by your local telephone company, NEW VOICE
MAIL and a
icon will appear on the handset
display when you have a new voicemail message.
The VOICEMAIL light on the telephone base will
flash.
#,2ꢀ6/)#%ꢀ-!),
Follow the steps on the left to manually remove
the NEW VOICE MAIL message, the
icon, and
turn off the VOICEMAIL light.
This only turns off the displayed NEW VOICE
MAIL message, icon and the VOICEMAIL light;
it does not delete your voicemail message(s). Use
this feature when the telephone indicates there
is voicemail when you have none or you have
accessed your voicemail from a remote location
(while away from home). If there is actually a new
voicemail message, your local telephone company
will continue to send a signal which will cause the
#,%!2ꢈꢀ9%3
NEW VOICE MAIL message, the
icon and the
VOICEMAIL light to turn back on.
NOTE: Telephone company voicemail may alert you to
Œƒ•ꢀ‹ƒ‘‘ꢂƒ‘ꢀ•‡’†ꢀꢀ‘’“’’ƒꢀƪ€‰ƒŒƫꢀ‚‡Šꢀ’ŒƒƓꢀꢇŒ’’ꢀ—“ꢀ
telephone company for more details.
13
Telephone operation
Basic operation
Making and answering calls
ꢌꢀŒ‘•ƒꢀŒꢀ‡Œ‹‡ŒꢂꢀŠŠƐꢀŽƒ‘‘ꢀŒ—ꢀ‰ƒ—‘ꢀƪƒ–ƒŽ’ꢀ
Elapsed
time
0(/.%ꢀ/.ꢀꢀꢀꢀꢀꢂꢂꢃꢊꢂ
CID, DIR
and
OFF/CLEAR). To make a call,
press PHONE/FLASH or
SPEAKER, then dial a
number. Press OFF/CLEAR to hang up.
To predial (preview numbers before dialing),
enter numbers first, then press PHONE/FLASH or
SPEAKER to dial. Press CID then CHAN/DELETE
anytime to make corrections when entering num-
bers.
The screen displays the elapsed time of the current
call (in hours, minutes and seconds).
NOTES:
1. The elapsed time format is in minutes and seconds MM:SS
until one hour has elapsed, then it will change to hours,
minutes and seconds H:MM:SS.
2. Pressing
PHONE/FLASH to access service from your local
telephone service provider will not affect the elapsed time.
Hands-free speakerphone calls
30%!+%2ꢀꢀꢀꢀꢀꢀꢂꢂꢃꢇꢉ
To answer a call, press
call, press SPEAKERƐꢀ’†ƒŒꢀ‚‡ŠꢀꢀŒ“‹€ƒƓꢀꢅ“‡Œꢂꢀ
a call press SPEAKER to alternate between
SPEAKER. To make a
hands-free speakerphone and normal handset
use. Press OFF/CLEAR to hang up.
NOTE: If a headset is plugged into the handset, the
handset speakerphone will be disabled.
14
Telephone operation
Basic operation
Last number redial
While the phone is not in use, press REDIAL/PAUSE
on the cordless handset to display the last number
called (up to 32 digits). To dial the number dis-
played, press PHONE/FLASH or
SPEAKER.ꢀ ꢋƐꢀ
after pressing PHONE/FLASH or SPEAKER, press
REDIAL/PAUSE to call the last number dialed.
To delete this number, press REDIAL/PAUSE twice
when the phone is not in use. This will clear the
redial memory and leave it blank.
ꢈ‡Œꢂƒꢀ
silenced
Press OFF/CLEARꢀ’ꢀƒ–‡’Ɠ
Temporary ring silencing
Press OFF/CLEAR while the telephone is ringing
to silence the ringer temporarily. This will silence
the ringer without disconnecting the call. You can
Œ‘•ƒꢀ ’†ƒꢀ ŠŠƓꢀ ꢌ†ƒꢀ Œƒ–’ꢀ ‡Œ‹‡Œꢂꢀ ŠŠꢀ •‡ŠŠꢀ ‡Œꢂꢀ
normally.
15
Telephone operation
Basic operation
Handset locator
If you misplace the handset, press
HANDSET
LOCATOR on the telephone base. This starts the
Žꢂ‡Œꢂꢀ ’Œƒꢀ ’ꢀ ’†ƒꢀ †Œ‚‘ƒ’ꢀ „ꢀ ǒnjꢀ ‘ƒŒ‚‘ꢀ ’ꢀ
help you locate it. To stop the paging tone, press
OFF/CLEAR on handset, or place handset in the
telephone base, or press the HANDSET LOCATOR
on the telephone base.
ꢋꢋꢀ0!').'ꢀꢋꢋ
NOTE: If the handset is charging in the telephone
base, pressing
paging tone.
HANDSET LOCATOR does not generate a
Ǎǒ
Telephone operation
Options while on calls
Volume control
Press CID/-VOLUME to decrease the volume.
Press DIR /VOLUME+ to increase the volume.
When changing the volume level, the new setting
is saved.
6/,5-%
Call waiting
If you subscribe to call waiting service with your
local telephone company, there will be a beep if
there is an incoming call while you are already on a
call. Press PHONE/FLASH to put your current call
on hold and take the new call. Press PHONEƤFLASH
anytime to switch back and forth between calls. For
‹ƒꢀ‡Œ„‹’‡ŒꢀŒꢀŠŠƒꢀꢉꢅƐꢀ‘ƒƒꢀŽꢂƒꢀǎǐƓ
Mute
Press MUTE to silence the microphone. When mute
is on, MICROPHONE MUTED will show on the
handset screen. You will be able to hear the caller,
but the caller will not be able to hear you until you
press MUTE again and resume speaking. When the
mute function is turned off, MICROPHONE ON will
show temporarily on the handset screen.
Temporary tone dialing
If dial pulse (rotary) is selected, you can switch to touch
tone dialing during a call by pressing TONE . This can
*
be useful if it is necessary to send tone signals for
Tone
access to answering systems or long-distance services.
After you hang up or press PHONE/FLASH (to
receive a call waiting call), the telephone auto-
matically returns to dial pulse (rotary) service.
Mute
ꢇ†ŒŒƒŠ
Channel selection
ꢅ“‡ŒꢂꢀꢀŠŠƐꢀ‡„ꢀ—“ꢀ†ƒꢀŠ‡‰‘ꢀŒ‚ꢀŽŽ‘Ɛꢀꢀ‡„ꢀ’†ƒꢀ
speech sometimes fades, press CHAN/DELETE on
the handset to scan for a clearer radio channel
between cordless handset and base.
17
Directory
Memory capacity
The handset directory can store up to 30 entries
(including nine speed dial locations). Each entry
can contain a number up to 24 digits, and a name
up to 15 letters long. A convenient search feature
can help you find and dial numbers quickly (page
22).
0!4ꢀ7),,)!-3
ꢌꢌꢌꢁꢅꢊꢇ
Timeouts and error messages
If you pause for too long while creating an entry,
the procedure will time out and you will have to
begin again.
If all memory locations are in use, the screen
will display MEMORY FULL. You will not be able
’ꢀ ‘’ƒꢀ ꢀ Œƒ•ꢀ Œ“‹€ƒꢀ “Œ’‡Šꢀ Œꢀ ƒ–‡‘’‡Œꢂꢀ Œƒꢀ ‡‘ꢀ
deleted.
-%-/29ꢀ&5,,
18
ꢅ‡ƒ’—
Speed dial
NOTE: The speed dial fea-
ture occupies up to nine of the
thirty memory locations in the
‚‡ƒ’—Ɠꢀ ꢍꢀ ƒ–‹ŽŠƒƐꢀ ‡„ꢀ ’†ƒƒꢀ
are only five speed dial entries,
then up to 25 entries can be
stored in the directory. If there
are already 30 entries in the
directory, no new directory and
speed dial entries can be stored
in memory until some of the
ƒ–‡‘’‡ŒꢂꢀŒƒ‘ꢀƒꢀ‚ƒŠƒ’ƒ‚Ɠ
You can enter nine speed dial numbers of up to 24
digits. Each number is stored in a one-digit speed
dial location (1-9).
The nine speed dial numbers on handset will be
automatically added to the handset directory.
Press and hold a dial pad key and then press
PHONE/FLASH or
these telephone numbers. You can also make
SPEAKER can easily dial
ƒ–‡‘’‡Œꢂꢀ‚‡ƒ’—ꢀƒŒ’‡ƒ‘ꢀ‡Œ’ꢀ‘Žƒƒ‚ꢀ‚‡ŠꢀƒŒ’‡ƒ‘Ɠ
To enter a speed dial number
MENU/SELECT
1.
2.
1. Press MENU/SELECT.
$)2%#4/29
2. Press DIR
or CID until the screen displays
SPEED DIAL.
3. Press MENU/SELECT.
DIR
or CID
4. Press dial pad to choose speed dial location (1-9).
5. Enter a name up to 15 characters (page 20),
30%%$ꢀ$)!,
then press MENU/SELECT.
ǒƓꢀꢊŒ’ƒꢀꢀ’ƒŠƒŽ†ŒƒꢀŒ“‹€ƒꢀ“Žꢀ’ꢀǎǐꢀ‚‡ꢂ‡’‘ꢀƪŽꢂƒꢀ
21), then press MENU/SELECT.
MENU/SELECT
3.
4.
ǓƓꢀꢇ†‘ƒꢀ‚‡‘’‡Œ’‡”ƒꢀ‡Œꢂ‡Œꢂꢀƪ—ƒ‘ꢀꢀŒƫꢀ€—ꢀŽƒ‘‘‡Œꢂꢀ
CID or DIR . If you choose Yes (and if you have
ŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒƫƐꢀꢀ‚‡„„ƒƒŒ’ꢀ‡Œꢂ‡Œꢂꢀ‘’—Šƒꢀ•‡ŠŠꢀŠƒ’ꢀ
you when this person calls.
%.4%2ꢀꢁꢍꢉ
8. Press MENU/SELECT to store the number. You
will hear a confirmation tone.
To call a speed dial number
To use speed dialing, press and hold a dial pad
button (1-9) to display the number and name
stored in that speed-dial location, then press
PHONE/FLASH or SPEAKER to dial.
%.4%2ꢀ.!-%
ꢂꢁ
To edit or delete a speed dial number
(Pages 20-21).
Press and hold a dial pad button (1-9) to display
the entry you want. Press MENU/SELECT, then
press CID or DIR
until the option you want is
displayed (page 23).
NOTE: You can convert any
directory entry into speed dial
entry (page 23).
19
ꢅ‡ƒ’—
New directory entries
NOTE: If all memory
locations are in use, an error
tone will sound when you
attempt to enter a number.
This means the memory is full,
and you will not be able to
store a new number until you
‚ƒŠƒ’ƒꢀŒꢀƒ–‡‘’‡ŒꢂꢀŒƒƓ
To enter a name
ƨꢀꢀꢎƒ‘‘ꢀMENU/SELECT twice.
ƨꢀꢀꢌ†ƒꢀ‘ƒƒŒꢀ•‡ŠŠꢀ‘†•ꢀENTER NAME.
ƨꢀꢀꢊŒ’ƒꢀ’†ƒꢀŒ‹ƒꢀƪ“Žꢀ’ꢀǍǑꢀŠŽ†Œ“‹ƒ‡ꢀ†-
ters) of the person using the table below.
ƨꢀꢀꢁ‘ƒꢀDIR ꢀ’ꢀ‚”Œƒꢀ’ꢀ’†ƒꢀŒƒ–’ꢀ‘Žƒꢀ’ꢀ’†ƒꢀ
right, or use CID then CHAN/DELETE to delete
a mistake.
MENU/SELECT
1.
2.
$)2%#4/29
ƨꢀꢀꢔ†ƒŒꢀ„‡Œ‡‘†ƒ‚ꢀƒŒ’ƒ‡Œꢂꢀ’†ƒꢀŒ‹ƒƐꢀŽƒ‘‘ꢀ
MENU/SELECT.
Each press of a particular key causes characters
to be displayed in the following order:
MENU/SELECT
%.4%2ꢀ.!-%
3.
0!4ꢀ*/(.3/.?
Options while entering names:
ƨꢀꢀꢎƒ‘‘ꢀ’†ƒꢀDIR
button to move the cursor to
twice to enter a space.
the right. Press DIR
ƨꢀ ꢎƒ‘‘ꢀ CID then CHAN/DELETE to erase letters if
you make a mistake.
ƨꢀꢀꢎƒ‘‘ꢀ# repeatedly to enter an ampersand (&),
apostrophe ('), comma (,) hyphen (-), period (.),
or pound sign (#).
When finished, press MENU/SELECT.
20
ꢅ‡ƒ’—
New directory entries
MENU/SELECT
4.
5.
To enter a number
Use the dial pad to enter up to 24 digits. When
the number is complete, press MENU/SELECT.
%.4%2ꢀ.5-"%2
Options while entering numbers:
ƨꢀ ꢎƒ‘‘ꢀ CID then CHAN/DELETE to erase digits if
you make a mistake.
ƨꢀꢀꢎƒ‘‘ꢀREDIAL/PAUSE to enter a four-second
dialing pause. A 0 will be inserted.
024ꢀ*/(.3/.
ꢌꢌꢌꢎꢏꢄꢉ?ꢀ
ƨꢀ ꢔ†ƒŒꢀ „‡Œ‡‘†ƒ‚ꢀ ƒŒ’ƒ‡Œꢂꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ Œ“‹€ƒƐꢀ
press MENU/SELECT to confirm.
MENU/SELECT
ǒƓ
To assign a distinctive ring
Press CID or DIR
to select Y (yes) or N (no). If
$)34).#4ꢀ2).'ꢈꢀ.
ꢌꢌꢌꢎꢏꢄꢉ
—“ꢀ†‘ƒꢀ—ƒ‘ꢀƪŒ‚ꢀ‡„ꢀ—“ꢀ†”ƒꢀŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒƫƐꢀ
a different ringing style will alert you when this
person calls.
Press MENU/SELECT to choose the option dis-
played and store this entry in the directory.
MENU/SELECT
7.
A D appears in the display of each entry that has
been assigned a distinctive ring.
21
ꢅ‡ƒ’—
Directory search
DIR
1.
2.
Follow the steps on the left to browse through the
directory or search to find a specific entry. You can
press OFF/CLEARꢀŒ—’‡‹ƒꢀ’ꢀƒ–‡’ꢀ’†ƒꢀ‚‡ƒ’—Ɠ
$)2%#4/29
To browse through the directory
DIR
To browse, press DIR
to scroll through all entries one by one.
then press CID or DIR
!$!-
ꢌꢌꢌꢁꢅꢊꢇ
A
appears in the display of each entry that has
D
been assigned a distinctive ring (page 21).
To display first entry
DIR
NOTE: When reviewing the directory entries, all entries
(including those in the directory and in the speed dial) are dis-
played in alphabetical order. The entries in the speed dial are
identified by its speed dial number (01-09) in the lower right
corner of the screen.
"%4(ꢀ
ꢌꢌꢌꢇꢊꢅꢁ
To scroll name by
name
To search alphabetically
To shorten your search, press DIR then use the
telephone dial pad to enter the first letter of a
name, then press DIR to scroll forward until you
find the desired name.
-OR-
5
*/(.
If you have more than one name entry that begin
with the same letter, it is necessary to scroll through
all the names beginning with that letter before see-
‡ŒꢂꢀŒ‹ƒ‘ꢀ’†’ꢀ€ƒꢂ‡Œꢀ•‡’†ꢀ’†ƒꢀŒƒ–’ꢀŠƒ’’ƒƓ
ꢌꢌꢌꢂꢁꢅꢊ
To search alpha-
betically
Press dial pad buttons once for the first letter, twice
for the second, three times for the third, as shown
on page 20.
ꢍꢀƒ–‹ŽŠƒƐꢀ‡„ꢀ—“ꢀ†”ƒꢀŒ‹ƒꢀƒŒ’‡ƒ‘ꢀJENNIFER,
KEVIN and LINDA in your directory, pressing the
dial pad key 5 ƪꢕꢄꢆƫ once will show JENNIFER,
twice KEVIN, three times LINDA.
NOTE: When searching alphabetically and you press a
dial pad button, if there are no entries beginning with the let-
ters on that button, the handset will show NO DATA.
22
ꢅ‡ƒ’—
To change or dial entries
When any entry is displayed, press MENU/SELECT
to see options. Press CID or DIR
to highlight
’†ƒꢀ Ž’‡Œꢀ —“ꢀ •Œ’ꢀ ƪ€Š‡Œ‰‡Œꢂꢀ ’ƒ–’ƫƐꢀ ’†ƒŒꢀ Žƒ‘‘ꢀ
MENU/SELECT again to select it.
DIR
1.
2.
To edit an entry
$)2%#4/29
When EDIT is blinking, press MENU/SELECT. You
can change the name and number (or distinctive
ring setting on the cordless handset) by following
the steps described on pages 19-21.
DIR
!$2-
ꢌꢌꢌꢁꢅꢊꢇ
To delete an entry
Press DIR
until ERASE is blinking, then press
MENU/SELECT to display a confirmation screen
of ERASE NO YES.
MENU/SELECT
3.
You can press CID or DIR
NO or YES to determine:
to alternate between
30%%$ꢀ%$)4ꢀ%2!3%
ꢌꢌꢌꢁꢅꢊꢇ
ƨꢀ ꢔ†ƒŒꢀ’†ƒꢀYES blinking, press MENU/SELECT to
delete the entry.
DIR
ƨꢀ ꢔ†ƒŒꢀ’†ƒꢀNO blinking, press MENU/SELECT to
cancel the procedure.
30%%$ꢀ%$)4ꢀ%2!3%
ꢌꢌꢌꢁꢅꢊꢇ
To make an entry into a speed dial entry
Press DIR until SPEED is blinking, press MENU/SELECT,
then dial a memory location (1-9) to transfer this
entry to your speed dial directory.
DIR
30%%$ꢀ%$)4ꢀ%2!3%
ꢌꢌꢌꢁꢅꢊꢇ
NOTE: If you use a memory location that is already
assigned to a different entry in the directory, that entry will
remain in the directory, but will no longer be a speed dial
number.
Press MENU/SELECT
to choose blinking
option.
To dial a displayed number
When any directory entry is displayed, press
PHONE/FLASH or
SPEAKER to dial the
displayed number.
23
Caller ID summary
Information about caller ID with call waiting
ꢌ†‡‘ꢀŽ‚“’ꢀ†‘ꢀꢀŠŠƒꢀꢉꢅꢀ„“Œ’‡Œꢀ•‡’†ꢀŠŠꢀ•‡’-
ing feature which works with service from your
local telephone company.
#(2)34).%ꢀ3-)4(
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢇŠŠƒꢀꢉꢅꢀ•‡’†ꢀŠŠꢀ•‡’‡ŒꢂꢀŠƒ’‘ꢀ—“ꢀ‘ƒƒꢀ’†ƒꢀŒ‹ƒꢀ
and telephone number of the caller before answer-
ing the telephone, even when on another call.
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
It may be necessary to change your telephone
‘ƒ”‡ƒꢀ’ꢀ“‘ƒꢀ’†‡‘ꢀ„ƒ’“ƒƓꢀꢇŒ’’ꢀ—“ꢀ’ƒŠƒŽ†Œƒꢀ
company if:
ƨꢀ ꢏ“ꢀ†”ƒꢀ€’†ꢀŠŠƒꢀꢉꢅꢀŒ‚ꢀŠŠꢀ•‡’‡ŒꢂƐꢀ€“’ꢀ‘ꢀ
separate services (you may need combined service).
ƨꢀ ꢏ“ꢀ†”ƒꢀŒŠ—ꢀŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒƐꢀꢀŒŠ—ꢀŠŠꢀ•‡’‡Œꢂꢀ
service.
ƨꢀ ꢏ“ꢀ ‚ꢀ Œ’ꢀ †”ƒꢀ Œ—ꢀ ŠŠƒꢀ ꢉꢅꢀ ꢀ ŠŠꢀ •‡’‡Œꢂꢀ
services.
ꢌ†‡‘ꢀ Ž‚“’ꢀ Œꢀ €ƒꢀ “‘ƒ‚ꢀ •‡’†ꢀ ƒꢂ“Šꢀ ŠŠƒꢀ ꢉꢅꢀ
service, or this product’s other features can be
“‘ƒ‚ꢀ •‡’†“’ꢀ ‘“€‘‡€‡Œꢂꢀ ’ꢀ ƒ‡’†ƒꢀ ŠŠƒꢀ ꢉꢅꢀ ꢀ
‹€‡Œƒ‚ꢀŠŠƒꢀꢉꢅꢀ•‡’†ꢀŠŠꢀ•‡’‡Œꢂꢀ‘ƒ”‡ƒƓꢀꢌ†ƒƒꢀ
ƒꢀ„ƒƒ‘ꢀ„ꢀŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒ‘ƐꢀŒ‚ꢀ’†ƒ—ꢀ‹—ꢀŒ’ꢀ€ƒꢀ
available in all areas.
ꢅƒŽƒŒ‚‡ŒꢂꢀŒꢀ—“ꢀ‘ƒ”‡ƒƐꢀ—“ꢀ‹—ꢀ‘ƒƒꢀ’†ƒꢀŠŠƒƛ‘ꢀ
number or the caller’s name and number. This
product can provide information only if both you and
’†ƒꢀŠŠƒꢀƒꢀ‡Œꢀƒ‘ꢀ„„ƒ‡ŒꢂꢀŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒꢀŒ‚ꢀ‡„ꢀ
both telephone companies use compatible equipment.
The time and date are sent by the telephone company
along with the call information.
24
ꢇŠŠƒꢀꢉꢅꢀŽƒ’‡Œ
Caller ID summary
How caller ID works
ꢉ„ꢀ —“ꢀ ‘“€‘‡€ƒꢀ ’ꢀ ŠŠƒꢀ ꢉꢅꢀ ‘ƒ”‡ƒꢀ Ž”‡‚ƒ‚ꢀ €—ꢀ
your local telephone company, information about
each caller will be displayed between the first and
second ring.
ꢋ
#(2)34).%ꢀ3-)4(ꢀ
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
Appears when a caller
has made two or more
consecutive calls.
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
ꢋ
ꢇŠŠƒƛ‘ꢀŒ‹ƒ
ꢇŠŠƒƛ‘ꢀŽ†Œƒꢀ
number
ꢇŠŠꢀŒ“‹€ƒꢀ„ꢀ
call summary
#(2)34).%ꢀ3-)4(ꢀ
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢅ
ꢂꢅꢆꢁꢇ
Appears when the
call is missed and
un-reviewed.
AM
ꢁꢂꢃꢂꢄ
Time of call ꢅ’ƒꢀ„ꢀŠŠ
Information about the last 30 incoming calls is
stored in the call summary. You can review the call
summary to find out who has called, return the call,
or copy the caller’s name and number into directory.
If the caller has made two or more consecutive
calls, the repeat tag ( ) will be displayed in the top
right corner of the screen.
*
NOTES:
1. ꢇŠŠƒꢀ ꢉꢅꢀ „ƒ’“ƒ‘ꢀ •‡ŠŠꢀ •‰ꢀ
only if both you and the
caller are in areas offering
ŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒƐꢀŒ‚ꢀ‡„ꢀ€’†ꢀ
telephone companies use
compatible equipment.
When the call summary is full, the oldest entry is
deleted to make room for new incoming call infor-
mation.
If you answer a call before the information appears
on the screen, it will not be saved in the call sum-
mary.
2. The number shown by your
ŠŠƒꢀ ꢉꢅꢀ •‡ŠŠꢀ €ƒꢀ ‡Œꢀ ’†ƒꢀ „-
mat sent by the telephone
company. The telephone
company usually delivers
10-digit telephone numbers
(area code plus telephone
number). If the telephone
number of the person call-
‡Œꢂꢀ‚ƒ‘ꢀŒ’ꢀƒ–’Š—ꢀ‹’†ꢀꢀ
number in your directory, the
name will appear as deliv-
ered by the telephone com-
ŽŒ—Ɠꢀꢍꢀƒ–‹ŽŠƒꢀ‡„ꢀ’†ƒꢀ’ƒŠƒ-
phone company includes the
area code and the directory
number does not, the name
will appear as delivered by
the telephone company.
About names
Names of callers will be displayed only if the infor-
mation is provided by your local telephone com-
pany.
ꢉ„ꢀ’†ƒꢀ‡Œ‹‡Œꢂꢀ’ƒŠƒŽ†ŒƒꢀŒ“‹€ƒꢀƒ–’Š—ꢀ‹’†ƒꢀ ‘ꢀ
a telephone number in your directory, the name that
appears on the screen will match the corresponding
name in your directory.
ꢍꢀƒ–‹ŽŠƒƒꢀꢉ„ꢀꢇ†‡‘’‡Œƒꢀꢃ‹‡’†ꢀŠŠ‘Ɛꢀ†ƒꢀŒ‹ƒꢀ•‡ŠŠꢀ
appear as CHRIS if this is how you entered it into
your directory.
25
ꢇŠŠƒꢀꢉꢅꢀŽƒ’‡Œ
Caller ID summary
There are also occasions when other information
or no information is displayed for various reasons:
On-screen message Reason
02)6!4%ꢀ.!-%ꢀ
ꢇŠŠƒꢀŽƒ„ƒ‘ꢀ’ꢀƒ‹‡ŒꢀŒŒ—-
mous.
#(2)34).%ꢀ3-)4(
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
02)6!4%ꢀ#!,,%2ꢀ
ꢇŠŠƒꢀŒ‹ƒꢀŒ‚ꢀ’ƒŠƒŽ†Œƒꢀ
number not revealed at caller's
request.
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
5.+./7.ꢀ.!-%
Your local telephone company is
unable to determine the caller's
name.
5.+./7.ꢀ#!,,%2
Your local telephone company is
unable to determine the caller's
name and telephone number.
ꢇŠŠ‘ꢀ „‹ꢀ ’†ƒꢀ “Œ’‡ƒ‘ꢀ ‹—ꢀ
also generate this message.
Missed calls
When the handset is in idle mode and has calls
that have not been reviewed, its screen will show
XX MISSED CALLS.
Any entries which have not been reviewed will be
counted as MISSED CALLS when the telephone is
idle. Each time a call summary entry marked NEW is
reviewed, the number of missed calls decreases by
one.
ꢂꢅꢀ-)33%$ꢀ#!,,3
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
If there are too many missed calls and you don’t want
to review them one by one, but still want to keep
them in the call summary, press and hold OFF/
CLEAR for two seconds when the handset is idle. All
’†ƒꢀ ƒŒ’‡ƒ‘ꢀ ‡Œꢀ ’†ƒꢀ ŠŠƒꢀ ꢉꢅꢀ ‘“‹‹—ꢀ •‡ŠŠꢀ €ƒꢀ Œ‘‡‚-
ered old (have been reviewed), and the missed calls
counter is reset to 0.
ǎǒ
CID
1.
2.
ꢇŠŠƒꢀꢉꢅꢀŽƒ’‡Œ
0!4ꢀ*/(.3/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢊ
ꢂꢅꢆꢁꢇ
To review the call summary
AM
ꢁꢂꢃꢂꢄ
CID
ꢌ†ƒꢀ ŠŠꢀ ‘“‹‹—ꢀ ƒ”‡ƒ•ꢀ ‚‡‘ŽŠ—‘ꢀ ’†ƒꢀ ŠŠƒꢀ ꢉꢅꢀ ‡Œꢀ
reverse chronological order, with the latest one (the
one with the highest number) first.
#(2)3ꢀ7),,)!-3
ꢉꢂꢄꢍꢌꢌꢌꢍꢁꢅꢊꢇ
ꢂꢅ
When the phone is not in use, press CID to display
information about the most recent caller.
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
PHONE/FLASH
3.
To review your call summary
0(/.%ꢀ/.ꢀꢀꢀꢀꢂꢂꢃꢁꢂ
ꢉꢂꢄꢌꢌꢌꢌꢎꢏꢄ
Press CID to scroll backward (display older calls)
or DIR
to scroll forward (display newer calls). The
highest call number is the most recent call received.
To dial this number
ꢊ†ꢀŠŠƒꢀꢉꢅꢀƒŒ’—ꢀ‡Œꢀ’†ƒꢀŠŠꢀ‘“‹‹—ꢀ•‡ŠŠꢀ€ƒꢀ‚ƒ‘-
ignated NEW until you have reviewed the call. After
a call has been reviewed, it will disappear.
NOTE:ꢀ ꢇŒ‘ƒ“’‡”ƒꢀ ‡Œ‹-
ing calls originating from the same
telephone number are identified
by an asterisk at the top right cor-
ner of the screen and will be To return a call
counted as one call in the caller
Press
PHONE/FLASH or
SPEAKER to call the
ꢉꢅꢀ‘“‹‹—Ɠ
CID
number currently displayed.
0!4ꢀ*/(.3/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
Dialing options
ꢂꢊ
ꢇŠŠƒꢀ ꢉꢅꢀ Œ“‹€ƒ‘ꢀ ‹—ꢀ ŽŽƒꢀ •‡’†ꢀ Œꢀ ƒꢀ ‚ƒꢀ
that may not be required for local calls.
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
If the number displayed is not in the correct format,
you can change how it is dialed. Press # repeatedly
to see dialing options. With each button press, a
new option will be displayed. Press PHONE/FLASH
or SPEAKER to dial when the number appears in
the proper format for your area.
- OR-
CID
1.
2.
0!4ꢀ*/(.3/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢊ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
The various dialing options are:
#
0!4ꢀ*/(.3/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢁꢍꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢁꢍꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢌꢌꢌꢍꢂꢁꢂꢂ
ꢁꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢊ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
3.
4.
#
0!4ꢀ*/(.3/.
ꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢊ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
#
0!4ꢀ*/(.3/.
ꢁꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢊ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
27
ꢇŠŠƒꢀꢉꢅꢀŽƒ’‡Œ
CID
1.
2.
3.
0!4ꢀ*/(.3/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
Delete call summary entries
ꢂꢊ
ꢂꢅꢆꢁꢇ
AM
To delete a single call summary entry
ꢁꢂꢃꢂꢄ
Press CIDꢀ ’ꢀ ‚‡‘ŽŠ—ꢀ ’†ƒꢀ „‡‘’ꢀ ŠŠƒꢀ ꢉꢅꢀ Š‡‘’‡ŒꢂƓꢀ
CID
Press CID or DIR
to find the entry you want to
#(2)3ꢀ7),,)!-3
ꢉꢂꢄꢍꢌꢌꢌꢍꢁꢅꢊꢇ
delete, then press CHAN/DELETE. When the entry
‡‘ꢀ‚ƒŠƒ’ƒ‚Ɛꢀ’†ƒꢀŒƒ–’ꢀŠ‚ƒ‘’ꢀƒ‚ꢀ‡‘ꢀ‚‡‘ŽŠ—ƒ‚Ɠ
ꢂꢅ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
CHAN/DELETE
To delete all call summary entries
-!2+ꢀ#,!94/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢌꢎꢏꢄ
To clear your call summary completely, press and
hold CHAN/DELETE while the phone is idle (not in
use). This will display a confirmation screen ask-
‡Œꢂꢀ‡„ꢀ—“ꢀ•Œ’ꢀ’ꢀƒ‘ƒꢀŠŠꢀƒŒ’‡ƒ‘ꢀ‡Œꢀ’†ƒꢀŠŠƒꢀꢉꢅꢀ
summary. If you select yes, the call summary will
be cleared and the screen will return to normal
standby display, and the missed calls counter is
reset to 0.
ꢂꢁ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
- OR-
ꢅꢏꢀ-)33%$ꢀ#!,,3
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
NOTE: ꢔ†ƒŒꢀ ’†ƒƒꢀ ƒꢀ Šƒ‚—ꢀ Ǐnjꢀ ƒŒ’‡ƒ‘ꢀ ‡Œꢀ ’†ƒꢀ ŠŠƒꢀ ꢉꢅꢀ
‹ƒ‹—Ɛꢀ’†ƒꢀŒƒ–’ꢀ‡Œ‹‡ŒꢂꢀŠŠꢀ•‡ŠŠꢀ“’‹’‡ŠŠ—ꢀ“‘ƒꢀ’†ƒꢀŠ‚-
ƒ‘’ꢀƒŒ’—ꢀ’ꢀ€ƒꢀ‚ƒŠƒ’ƒ‚ꢀ„‹ꢀ’†ƒꢀŠŠƒꢀꢉꢅꢀ‹ƒ‹—ꢀ„ꢀ’†ƒꢀ†Œ‚‘ƒ’Ɠ
CHAN/DELETE
1.
2.
3.
%2!3%ꢀ!,,ꢀ./ꢀ9%3
DIR
%2!3%ꢀ!,,ꢀ./ꢀ9%3
MENU/SELECT
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
ꢇŠŠꢀ‘“‹‹—ꢀ
cleared
28
ꢇŠŠƒꢀꢉꢅꢀŽƒ’‡Œ
CID
1.
2.
0!4ꢀ*/(.3/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
Add entries to the directory
ꢂꢊ
ꢔ†ƒŒꢀ Œ—ꢀ ŠŠƒꢀ ꢉꢅꢀ ‘ƒƒŒꢀ ‡‘ꢀ ‚‡‘ŽŠ—ƒ‚Ɛꢀ „ŠŠ•ꢀ ’†ƒꢀ
steps at left to enter it into your phone directory.
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
MENU/SELECT then
Both the caller’s name and telephone number will
be entered as they appear in the call summary. At
steps 3-4, you can make any changes to the name
or number by pressing CHAN/DELETE to erase char-
acters, then use the dial pad to enter the correct
information (see pages 20-21 for instructions).
CID or DIR
$)!,ꢀ02/'2!-
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢊ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
MENU/SELECT
3.
4.
5.
ǒƓ
When the number is stored, the screen returns to
the call summary display. The entry copied to your
phone directory remains in the call summary until
deleted.
0!4ꢀ*/(.3/.
ꢉꢂꢄꢌꢌꢌꢂꢁꢂꢂ
ꢂꢊ
ꢂꢅꢆꢁꢇ
AM
ꢁꢂꢃꢂꢄ
Edit name as desired
MENU/SELECT
0!4ꢀ*/(.3/.
ꢉꢂꢄꢌꢌꢌꢂꢁꢂꢂ?
ꢂꢊ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
Edit number as desired
MENU/SELECT
$)34).#4ꢀ2).'ꢈꢀ.
ꢉꢂꢄꢌꢌꢌꢂꢁꢂꢂ
ꢂꢊ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
MENU/SELECT
0!4ꢀ*/(.3/.
ꢉꢂꢄꢍꢌꢌꢌꢍꢂꢁꢂꢂ
ꢂꢊ
ꢂꢅꢆꢁꢇ
AM
ꢁꢂꢃꢂꢄ
Entry added to
phone directory
29
ɇŽŽƒŒ‚‡–
Screen icons, indicator lights & tones
Screen icons & alert tones
Screen icons
The handset speakerphone is in use.
ꢂꢎꢀ-)33%$ꢀ#!,,3
Microphone is muted.
ꢈ‡Œꢂƒꢀ„„Ɠ
ꢂꢅ
AM
ꢁꢂꢃꢂꢄ
ꢂꢅꢆꢁꢇ
Battery charging (animated display).
ꢆ•ꢀ€’’ƒ—ꢀƪ„Š‘†‡ŒꢂƫƑꢀŽŠƒꢀ†Œ‚‘ƒ’ꢀ‡Œꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ’ꢀ
recharge.
Missed and un-reviewed calls.
Handset alert tones
ꢌ†ƒꢀ”Š“‹ƒꢀŠƒ”ƒŠꢀ‡‘ꢀ’ꢀ’†ƒꢀ‹–‡‹“‹ꢀꢀ‹‡Œ‡‹“‹ꢀ‘ƒ’’‡ŒꢂƓ
ꢆ•ꢀ€’’ƒ—ꢀ•Œ‡ŒꢂƓ
Two short beeps
Double beep every
five seconds
Five beeps
ꢋ“’ꢀ„ꢀŒꢂƒꢀ•†ƒŒꢀŒꢀ’†ƒꢀŠ‡ŒƒƓ
Confirmation tone
ꢇ‹‹Œ‚ꢀ‹ŽŠƒ’ƒ‚ꢀ‘“ƒ‘‘„“ŠŠ—Ɠ
Indicator lights
CHARGE/IN USE
ƨꢀ ꢋŒꢀ•†ƒŒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ
handset is properly
positioned to charge
in the telephone base.
ƨꢀ Flashes quickly while
an incoming call is
ringing.
ƨꢀ ꢋŒꢀ •†ƒŒꢀ Œƒꢀ „ꢀ ’†ƒꢀ
VOICEMAIL
handsets is in use.
Flashes when there is new voicemail
(requires voicemail service from your
local telephone company).
SPEAKER
ꢋŒꢀ •†ƒŒꢀ ’†ƒꢀ
speakerphone
is in use.
30
ɇŽŽƒŒ‚‡–
Handset display screen messages
Screen display messages
The cordless handset is waiting
for a dial tone.
#/..%#4).'ꢐꢐꢐ
There is a call coming in.
ꢋꢋꢀ2).').'ꢀꢋꢋ
ꢋꢋꢀ0!').'ꢀꢋꢋ
#/..%#4).' ꢐꢀꢐꢀꢐ
The cordless handset locator has
been activated (the cordless handset
beep to help you locate it).
ꢇ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ€’’ƒ—ꢀ‡‘ꢀ‚ƒŽŠƒ’ƒ‚Ɠꢀ
Place cordless handset in base to
charge the battery.
.%%$3ꢀ2%#(!2').'
"!44%29ꢀ,/7
ꢇ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ€’’ƒ—ꢀ‡‘ꢀŠ•Ɠꢀ
Place cordless handset in base
or charger to charge the battery.
The cordless handset is in use.
0(/.%ꢀ/.
ꢇ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‡‘ꢀ‘ŒŒ‡Œꢂꢀ
for a clear channel to improve
sound quality.
3#!..).'ꢐꢐꢐ
The handset cannot communicate
with base.
#!.ꢑ4ꢀ#/..%#4
There are missed and un-reviewed
calls in your call summary.
88ꢀ-)33%$ꢀ#!,,3
2).'%2ꢀ/&&
The cordless handset ringer is
turned off.
You are saving to a full directory.
-%-/29ꢀ&5,,
30%!+%2
The handset speakerphone is
in use.
The call switches from normal
call to mute.
-)#2/0(/.%ꢀ-54%$
-)#2/0(/.%ꢀ/.
The call switches from mute to
normal call.
31
ɇŽŽƒŒ‚‡–
Troubleshooting
If you have difficulty with your telephone, please try the sug-
gestions below. For Customer Service, visit our website at
dial 1 (866) 288-4268.
My telephone
does not work
at all
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀ€’’ƒ—ꢀ‡‘ꢀ‡Œ‘’ŠŠƒ‚ꢀŒ‚ꢀ†ꢂƒ‚ꢀƒ’Š—ꢀ
(page 7). For optimum daily performance, return the
cordless handset to the telephone base after use.
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀŽ•ƒꢀ‚Ž’ƒꢀ‡‘ꢀ‘ƒ“ƒŠ—ꢀŽŠ“ꢂꢂƒ‚ꢀ‡Œ’ꢀŒꢀ
outlet not controlled by a wall switch.
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ‚ꢀ‡‘ꢀŽŠ“ꢂꢂƒ‚ꢀ„‡‹Š—ꢀ‡Œ’ꢀ
the telephone base and the modular wall jack.
ƨꢀ ꢁŒŽŠ“ꢂꢀ’†ƒꢀ’ƒŠƒŽ†Œƒƛ‘ꢀƒŠƒ’‡ŠꢀŽ•ƒƓꢀꢔ‡’ꢀ„ꢀŽŽ–-
imately 15 seconds, then plug it back in. Allow up to one
minute for the cordless handset and base to synchronize.
ƨꢀ ꢇ†ꢂƒꢀ’†ƒꢀ€’’ƒ—ꢀ‡Œꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ„ꢀ’ꢀŠƒ‘’ꢀ
Ǎǒꢀ†“‘Ɠ
ƨꢀ ꢈƒ‹”ƒꢀ Œ‚ꢀ ƒƕ‡Œ‘ƒ’ꢀ ’†ƒꢀ €’’ƒ—Ɠꢀ ꢉ„ꢀ ’†’ꢀ ‘’‡ŠŠꢀ ‚ƒ‘ꢀ Œ’ꢀ
work, it may be necessary to purchase a new battery.
ƨꢀ ꢅ‡‘ŒŒƒ’ꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ €‘ƒꢀ „‹ꢀ ’†ƒꢀ ‹‚“Šꢀ ˆ‰ꢀ
and plug in a working telephone. If this telephone does
not work, the problem is probably in the wiring or the
ŠŠꢀ‘ƒ”‡ƒƓꢀꢇŠŠꢀ’†ƒꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ—Ɠ
BATTERY LOW
is displayed on
screen
ƨꢀ ꢎŠƒꢀ’†ƒꢀ†Œ‚‘ƒ’ꢀ‡Œꢀ’†ƒꢀ€‘ƒꢀ„ꢀƒ†ꢂ‡ŒꢂƓ
ƨꢀ ꢈƒ‹”ƒꢀ Œ‚ꢀ ƒƕ‡Œ‘’ŠŠꢀ ’†ƒꢀ €’’ƒ—ꢀ Œ‚ꢀ “‘ƒꢀ ‡’ꢀ Œ‹ŠŠ—ꢀ
until fully discharged, then recharge the handset on the
’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ„ꢀǍǒꢀ†“‘Ɠ
ƨꢀ ꢉ„ꢀ’†ƒꢀ€”ƒꢀ‹ƒ‘“ƒ‘ꢀ‚ꢀŒ’ꢀƒ’ꢀ’†ƒꢀŽ€Šƒ‹Ɛꢀ’†ƒꢀ
battery may need to be replaced.
The battery does
not charge in
the handset or
the handset bat-
tery does not
accept charge
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀ†Œ‚‘ƒ’ꢀ‡‘ꢀŽŠƒ‚ꢀ‡Œꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ
correctly. The CHARGE light on the telephone base
should be on.
ƨꢀ ꢉ„ꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‡‘ꢀ‡Œꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ€“’ꢀ’†ƒꢀ
CHARGE light is not on, refer to The CHARGE light is
off in this section.
32
ɇŽŽƒŒ‚‡–
Troubleshooting
ƨꢀ ꢉ’ꢀ‹—ꢀ€ƒꢀŒƒƒ‘‘—ꢀ’ꢀŽ“†‘ƒꢀꢀŒƒ•ꢀ€’’ƒ—ƓꢀꢎŠƒ‘ƒꢀ
refer to the Batteries section of this user’s manual.
ƨꢀ ꢌ†ƒꢀ’ƒŠƒŽ†Œƒꢀ‹‡ꢂ†’ꢀ€ƒꢀ‹Š„“Œ’‡Œ‡ŒꢂƓꢀꢎŠƒ‘ƒꢀƒ„ƒꢀ’ꢀ
the Limited warranty section of this user’s manual for
further instruction.
The CHARGE
light is off
ƨꢀ ꢇŠƒŒꢀ ’†ƒꢀ ‹ƒ’ŠŠ‡ꢀ †ꢂ‡Œꢂꢀ Œ’’‘ꢀ Œꢀ ’†ƒꢀ ‚Šƒ‘‘ꢀ
handset and telephone base each month using a pencil
eraser or a dry non-abrasive fabric.
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀŽ•ƒꢀ‚Ž’ƒꢀŒ‚ꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ‚‘ꢀ
are plugged in correctly and securely.
ƨꢀ ꢁŒŽŠ“ꢂꢀ’†ƒꢀŽ•ƒꢀ‚Ž’ƒƓꢀꢔ‡’ꢀ„ꢀ ǍǑꢀ ‘ƒŒ‚‘ꢀ€ƒ„ƒꢀ
plugging it back in. Allow up to one minute for the cord-
less handset and telephone base to reset.
ƨꢀ ꢌ†ƒꢀ’ƒŠƒŽ†Œƒꢀ‹‡ꢂ†’ꢀ€ƒꢀ‹Š„“Œ’‡Œ‡ŒꢂƓꢀꢎŠƒ‘ƒꢀƒ„ƒꢀ’ꢀ
the Limited warranty section of this user’s manual for
further instruction.
There is no dial ƨꢀ ꢍ‡‘’Ɛꢀ’—ꢀŠŠꢀ’†ƒꢀ€”ƒꢀ‘“ꢂꢂƒ‘’‡Œ‘Ɠ
tone
ƨꢀ ꢒ”ƒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀŠ‘ƒꢀ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒƓꢀꢉ’ꢀ
might be out of range.
ƨꢀ ꢌ†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ‚ꢀ‹‡ꢂ†’ꢀ€ƒꢀ‹Š„“Œ’‡Œ‡ŒꢂƓꢀꢌ—ꢀ‡Œ‘’ŠŠ-
ing a new telephone line cord.
ƨꢀ ꢅ‡‘ŒŒƒ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ„‹ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀˆ‰ꢀŒ‚ꢀ
connect a different telephone. If there is no dial tone on the
telephone either, the problem is in your wiring or local serv-
‡ƒƓꢀꢇŒ’’ꢀ—“ꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ—Ɠ
The telephone
does not ring
when there is an
incoming call
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀ‡Œꢂƒꢀ‡‘ꢀŒꢀƪŽꢂƒꢀǍǎƕǍǏƫƓ
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ‚ꢀŒ‚ꢀŽ•ƒꢀ‚Ž’ƒꢀƒꢀ
ŽŠ“ꢂꢂƒ‚ꢀ‡ŒꢀŽŽƒŠ—ꢀƪŽꢂƒꢀǒƫƓ
ƨꢀ ꢌ†ƒꢀ ‚Šƒ‘‘ꢀ †Œ‚‘ƒ’ꢀ ‹—ꢀ €ƒꢀ ’ꢀ „ꢀ „‹ꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ
base. Move it closer to the telephone base.
ƨꢀ ꢌ†ƒƒꢀ‹—ꢀ€ƒꢀ’ꢀ‹Œ—ꢀƒ–’ƒŒ‘‡Œꢀ’ƒŠƒŽ†Œƒ‘ꢀŒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ
line to allow all of them to ring simultaneously. Try unplugging
some of them.
ƨꢀ ꢉ„ꢀ’†ƒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒ‘ꢀ‡Œꢀ—“ꢀ†‹ƒꢀƒꢀ†”‡Œꢂꢀ’†ƒꢀ‘‹ƒꢀ
problem, the problem is in the wiring or local service.
ꢇŒ’’ꢀ’†ƒꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ—ꢀƪ†ꢂƒ‘ꢀ‹—ꢀŽŽŠ—ƫƓ
33
ɇŽŽƒŒ‚‡–
Troubleshooting
ƨꢀ ꢋ’†ƒꢀƒŠƒ’Œ‡ꢀŽ‚“’‘ꢀŒꢀ“‘ƒꢀ‡Œ’ƒ„ƒƒŒƒꢀ’ꢀ—“ꢀ
cordless telephone. Try installing your telephone as far
away as possible from the following electronic devices:
wireless routers, radios, radio towers, pager towers, cel-
lular telephones, digital telephones, intercoms, room
‹Œ‡’‘Ɛꢀ’ƒŠƒ”‡‘‡Œ‘Ɛꢀꢓꢇꢈ‘ƐꢀŽƒ‘ŒŠꢀ‹Ž“’ƒ‘Ɛꢀ‰‡’†ƒŒꢀ
appliances, and other cordless telephones.
ƨꢀ ꢌƒ‘’ꢀꢀ•‰‡Œꢂꢀ’ƒŠƒŽ†Œƒꢀ’ꢀ’†ƒꢀ‘‹ƒꢀ’ƒŠƒŽ†Œƒꢀˆ‰Ɠꢀꢉ„ꢀ
another telephone has the same problem, the problem is
‡Œꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀˆ‰ƓꢀꢇŒ’’ꢀ—“ꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹-
pany (charges may apply).
ƨꢀ ꢌ†ƒꢀ ’ƒŠƒŽ†Œƒꢀ Š‡Œƒꢀ ‚ꢀ ‹‡ꢂ†’ꢀ €ƒꢀ ‹Š„“Œ’‡Œ‡ŒꢂƓꢀ ꢌ—ꢀ
installing a new telephone line cord.
ƨꢀ ꢈƒƕ‡Œ‘’ŠŠꢀ’†ƒꢀ€’’ƒ—ꢀŒ‚ꢀŽŠƒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‡Œꢀ
the telephone base.
ƨꢀ ꢔ‡’ꢀ „ꢀ ’†ƒꢀ ‚Šƒ‘‘ꢀ †Œ‚‘ƒ’ꢀ ’ꢀ ‘—Œ†Œ‡˜ƒꢀ •‡’†ꢀ ’†ƒꢀ
telephone base. Allow up to one minute for this to take
place.
My phone rings but ƨꢀ ꢌ†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‹—ꢀ€ƒꢀ’ꢀ„ꢀ„‹ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ
base. Move closer to the telephone base and try to
when I try to answer
answer the call.
the call the hand-
set screen shows
CONNECTING…
I cannot dial out ƨꢀ ꢍ‡‘’Ɛꢀ’—ꢀŠŠꢀ’†ƒꢀ€”ƒꢀ‘“ꢂꢂƒ‘’‡Œ‘Ɠ
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒƒꢀ‡‘ꢀꢀ‚‡Šꢀ’Œƒꢀ€ƒ„ƒꢀ‚‡Š‡ŒꢂƓꢀꢉ’ꢀ‡‘ꢀŒ-
mal if the cordless handset takes a second or two to
synchronize with the telephone before producing a dial
’ŒƒƓꢀꢔ‡’ꢀŒꢀƒ–’ꢀ‘ƒŒ‚ꢀ€ƒ„ƒꢀ‚‡Š‡ŒꢂƓ
ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ‡‘ꢀ‘ƒ’ꢀ’ꢀ’†ƒꢀƒ’ꢀ‚‡Šꢀ‹‚ƒꢀ
ƪŽ“Š‘ƒꢀ‚‡Šꢀꢀ’Œƒꢀ‚‡Šƫꢀ„ꢀ’†ƒꢀ‘ƒ”‡ƒꢀ‡Œꢀ—“ꢀƒƓꢀꢈƒ„ƒꢀ
to the Handset settings section of this user’s manual
(page 11) to set the dial mode.
ƨꢀ ꢉ„ꢀ ’†ƒꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒ‘ꢀ ‡Œꢀ —“ꢀ †‹ƒꢀ ƒꢀ †”‡Œꢂꢀ ’†ƒꢀ
same problem, the problem is in the wiring or local serv-
‡ƒƓꢀꢇŒ’’ꢀ—“ꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ—ꢀƪ†ꢂƒ‘ꢀ‹—ꢀ
apply).
34
ɇŽŽƒŒ‚‡–
Troubleshooting
ƨꢀ ꢊŠ‡‹‡Œ’ƒꢀ Œ—ꢀ €‰ꢂ“Œ‚ꢀ Œ‡‘ƒƓꢀ ꢐ‡‘ƒꢀ „‹ꢀ ꢀ ’ƒŠƒ”‡-
sion, radio, or other appliances may cause the telephone
to not dial out properly. If you cannot eliminate the
background noise, first try muting the cordless hand-
set before dialing, or dialing from another room in your
home with less background noise.
There is noise or ƨꢀ ꢌ†ƒꢀ†Œ‚‘ƒ’ꢀ‹—ꢀ€ƒꢀ“’ꢀ„ꢀŒꢂƒƓꢀꢒ”ƒꢀ‡’ꢀŠ‘ƒꢀ’ꢀ’†ƒꢀ
interference dur-
ing a telephone
conversation
telephone base.
My calls fade out ƨꢀ ɇŽŽŠ‡Œƒ‘ꢀ ꢀ ’†ƒꢀ ‚Šƒ‘‘ꢀ ’ƒŠƒŽ†Œƒ‘ꢀ ŽŠ“ꢂꢂƒ‚ꢀ ‡Œ’ꢀ
or cut in and out
when I am using
the cordless
handset
the same circuit as the telephone base can cause inter-
ference. Try moving the appliance or telephone base to
another outlet.
ƨꢀ ꢋ’†ƒꢀƒŠƒ’Œ‡ꢀŽ‚“’‘ꢀŒꢀ“‘ƒꢀ‡Œ’ƒ„ƒƒŒƒꢀ’ꢀ—“ꢀ
cordless telephone. Try installing your telephone as far
away as possible from the following electronic devices:
wireless routers, radios, radio towers, pager towers, cel-
lular telephones, digital telephones, intercoms, room
‹Œ‡’‘Ɛꢀ’ƒŠƒ”‡‘‡Œ‘Ɛꢀꢓꢇꢈ‘ƐꢀŽƒ‘ŒŠꢀ‹Ž“’ƒ‘Ɛꢀ‰‡’†ƒŒꢀ
appliances, and other cordless telephones.
ƨꢀ ꢒ‡•”ƒꢀ ”ƒŒ‘ꢀ Žƒ’ƒꢀ Œꢀ ’†ƒꢀ ‘‹ƒꢀ „ƒ“ƒŒ—ꢀ ‘ꢀ
—“ꢀ ’ƒŠƒŽ†ŒƒƓꢀ ꢉ’ꢀ ‡‘ꢀ Œ‹Šꢀ ’ꢀ ƒ–Žƒ‡ƒŒƒꢀ ‘’’‡ꢀ Œꢀ
your telephone while the microwave oven is operating.
ꢅꢀŒ’ꢀ‡Œ‘’ŠŠꢀ’†‡‘ꢀ’ƒŠƒŽ†Œƒꢀ‡Œꢀ’†ƒꢀ‘‹ƒꢀ“’Šƒ’ꢀꢀŒƒꢀ
a microwave oven.
ƨꢀ ꢉ„ꢀ—“ꢀ’ƒŠƒŽ†Œƒꢀ‡‘ꢀŽŠ“ꢂꢂƒ‚ꢀ‡Œꢀ•‡’†ꢀꢀ‹‚ƒ‹ꢀꢀꢀ‘“ꢂƒꢀ
Ž’ƒ’ƐꢀŽŠ“ꢂꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀƪꢀ‹‚ƒ‹Ƥ‘“ꢂƒꢀŽ’ƒ-
tor) into a different location. If this solves the problem,
re-locate your telephone or modem farther apart from
each other, or use a different surge protector.
ƨꢀ ꢌ†ƒꢀŠ—“’ꢀ„ꢀ—“ꢀ†‹ƒꢀꢀ„„‡ƒꢀ‹‡ꢂ†’ꢀ€ƒꢀŠ‡‹‡’‡Œꢂꢀ’†ƒꢀ
operating range. Try moving the base to another loca-
tion, preferably a higher location for better reception.
ƨꢀ ꢅ‡‘ŒŒƒ’ꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ €‘ƒꢀ „‹ꢀ ’†ƒꢀ ‹‚“Šꢀ ˆ‰ꢀ
and plug in a corded telephone. If calls are still not clear,
the problem is probably in the wiring or local service.
ꢇŒ’’ꢀ—“ꢀŠŠꢀ‘ƒ”‡ƒꢀ‹ŽŒ—ꢀƪ†ꢂƒ‘ꢀ‹—ꢀŽŽŠ—ƫƓ
35
ɇŽŽƒŒ‚‡–
Troubleshooting
ƨꢀ ꢃƒŠƒ’ꢀ†ŒŒƒŠ‘ꢀ„“ꢀ’†“ꢂ†ꢀǍnjꢀ„ꢀ—“ꢀ“’ƒꢀƪƒ„ƒꢀ’ꢀ
the user’s manual of your router for more information).
ƨꢀ ꢉ„ꢀ ’†ƒꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒ‘ꢀ ‡Œꢀ —“ꢀ †‹ƒꢀ ƒꢀ †”‡Œꢂꢀ ’†ƒꢀ
same problem, the problem is in the wiring or local serv-
‡ƒƓꢀꢇŒ’’ꢀ’†ƒꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ—ꢀƪ†ꢂƒ‘ꢀ‹—ꢀ
apply).
ƨꢀ ꢅꢀ—“ꢀ†”ƒꢀꢅꢃꢆꢀ‘ƒ”‡ƒƘꢀꢉ„ꢀ—ƒ‘Ɛꢀ—“ꢀŒƒƒ‚ꢀ’ꢀ†”ƒꢀꢀꢅꢃꢆꢀ
filter installed at every telephone jack that has a telephone
ŒŒƒ’ƒ‚ꢀ’ꢀ‡’ƓꢀꢇŒ’’ꢀ—“ꢀꢅꢃꢆꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒꢀ„ꢀ„‡Š’ƒꢀ
information.
I hear other
calls when using
the telephone
ƨꢀ ꢅ‡‘ŒŒƒ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ„‹ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀˆ‰Ɠꢀ
Plug in a different telephone. If you still hear other calls,
the problem is probably in the wiring or local service.
ꢇŠŠꢀ—“ꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ—Ɠ
ꢒ—ꢀŠŠƒꢀꢉꢅꢀ„ƒ’“ƒ‘ꢀ ƨꢀ ꢇŠŠƒꢀꢉꢅꢀ‡‘ꢀꢀ‘“€‘‡Ž’‡Œꢀ‘ƒ”‡ƒƓꢀꢏ“ꢀ‹“‘’ꢀ‘“€‘‡€ƒꢀ’ꢀ
are not working
this service from your local telephone company for this
properly
feature to work on your telephone.
ƨꢀ The caller may not be calling from an area which supports
ŠŠƒꢀꢉꢅƓ
ƨꢀ Ɇ’†ꢀ—“ꢀŒ‚ꢀ’†ƒꢀŠŠƒƛ‘ꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ‡ƒ‘ꢀ‹“‘’ꢀ“‘ƒꢀ
ƒ“‡Ž‹ƒŒ’ꢀ•†‡†ꢀƒꢀ‹Ž’‡€Šƒꢀ•‡’†ꢀŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒƓ
ƨꢀ ꢉ„ꢀ—“ꢀ‘“€‘‡€ƒꢀ’ꢀꢅꢃꢆꢀ‘ƒ”‡ƒƐꢀ‡Œ‘’ŠŠꢀꢀꢅꢃꢆꢀ„‡Š’ƒꢀ’ꢀ
the telephone line between the telephone base and
’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀˆ‰ƓꢀꢇŒ’’ꢀ—“ꢀꢅꢃꢆꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒꢀ
for filter information.
The system does ƨꢀ ꢒ‰ƒꢀ‘“ƒꢀ—“ꢀ‘“€‘‡€ƒꢀ’ꢀŠŠƒꢀꢉꢅꢀ•‡’†ꢀŠŠꢀ•‡’‡Œꢂꢀ„ƒ’“ƒ‘ꢀ
not receive caller
ꢉꢅꢀ ꢀ ’†ƒꢀ ‘—‘’ƒ‹ꢀ
does not display
ŠŠƒꢀ ꢉꢅꢀ ‚“‡Œꢂꢀ
call waiting
services provided by the local telephone company.
ƨꢀ The caller may not be calling from an area which supports
ŠŠƒꢀꢉꢅƓ
ƨꢀ Ɇ’†ꢀ—“ꢀŒ‚ꢀ’†ƒꢀŠŠƒƛ‘ꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ‡ƒ‘ꢀ‹“‘’ꢀ“‘ƒꢀ
ƒ“‡Ž‹ƒŒ’ꢀ•†‡†ꢀƒꢀ‹Ž’‡€Šƒꢀ•‡’†ꢀŠŠƒꢀꢉꢅꢀ‘ƒ”‡ƒƓ
ƨꢀ ꢉ„ꢀ—“ꢀ‘“€‘‡€ƒꢀ’ꢀꢅꢃꢆꢀ‘ƒ”‡ƒƐꢀ‡Œ‘’ŠŠꢀꢀꢅꢃꢆꢀ„‡Š’ƒꢀ’ꢀ
the telephone line between the telephone base and
’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀˆ‰ƓꢀꢇŒ’’ꢀ—“ꢀꢅꢃꢆꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒꢀ
for filter information.
Ǐǒ
ɇŽŽƒŒ‚‡–
Troubleshooting
ꢇ‹‹Œꢀ“ƒꢀ
for electronic
equipment
ƨ If the telephone is not responding normally, try putting
the cordless handset in the telephone base or the
charger. If it does not seem to respond, try the following
(in the order listed):
ǍƓꢀꢅ‡‘ŒŒƒ’ꢀ’†ƒꢀŽ•ƒꢀ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒƓ
ǎƓꢀꢅ‡‘ŒŒƒ’ꢀ’†ƒꢀ€’’ƒ—ꢀŒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’Ɠ
3. Wait a few minutes before connecting power to the
telephone base.
ǐƓꢀꢈƒƕ‡Œ‘’ŠŠꢀ’†ƒꢀ€’’ƒ—ꢀŒ‚ꢀŽŠƒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ
into the telephone base.
5. Wait for the cordless handset to synchronize its con-
nection with the telephone base. Allow up to one
minute for this to take place.
37
ɇŽŽƒŒ‚‡–
Important safety instructions
This symbol is to alert you to important operating or servicing instructions that may
appear in this user’s manual. Always follow basic safety precautions when using this product to
reduce the risk of injury, fire, or electric shock.
Safety information
ƨꢀ Read and understand all instructions in the user’s manual. Observe all
markings on the product.
ƨꢀ Avoid using a telephone during a thunderstorm. There may be a slight
chance of electric shock from lightning.
ƨꢀ Do not use a telephone in the vicinity of a gas leak. If you suspect a gas
leak, report it immediately, but use a telephone away from the area where
gas is leaking. If this product is a cordless model, make sure the base is
also away from the area.
ƨꢀ Do not use this product near water, or when you are wet. ꢍꢀƒ–‹ŽŠƒƐꢀ
‚ꢀŒ’ꢀ“‘ƒꢀ‡’ꢀ‡Œꢀꢀ•ƒ’ꢀ€‘ƒ‹ƒŒ’ꢀꢀ‘†•ƒƐꢀꢀŒƒ–’ꢀ’ꢀꢀ‘•‡‹‹‡ŒꢂꢀŽŠƐꢀ
€’†’“€Ɛꢀ‰‡’†ƒŒꢀ‘‡Œ‰ƐꢀꢀŠ“Œ‚—ꢀ’“€ƓꢀꢅꢀŒ’ꢀ“‘ƒꢀŠ‡“‡‚‘ꢀꢀƒ‘Šꢀ‘Ž—‘ꢀ
for cleaning. If the product comes in contact with any liquids, unplug any
Š‡ŒƒꢀꢀŽ•ƒꢀ‚ꢀ‡‹‹ƒ‚‡’ƒŠ—ƓꢀꢅꢀŒ’ꢀŽŠ“ꢂꢀ’†ƒꢀŽ‚“’ꢀ€‰ꢀ‡Œꢀ“Œ’‡Šꢀ‡’ꢀ†‘ꢀ
dried thoroughly.
ƨꢀ Install this product in a protected location where no one can trip over
any line or power cords. Protect cords from damage or abrasion.
ƨꢀ If this product does not operate normally, read Troubleshooting in this
user’s manual. If you cannot solve the problem, or if the product is dam-
ꢂƒ‚Ɛꢀƒ„ƒꢀ’ꢀ’†ƒꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ƓꢀꢅꢀŒ’ꢀŽƒŒꢀ’†‡‘ꢀŽ‚“’ꢀƒ–ƒŽ’ꢀ‘ꢀ‹—ꢀ
€ƒꢀ‚‡ƒ’ƒ‚ꢀ‡Œꢀ—“ꢀ“‘ƒƛ‘ꢀ‹Œ“ŠƓꢀꢋŽƒŒ‡Œꢂꢀ’†ƒꢀŽ‚“’ꢀꢀƒ‘‘ƒ‹€Š‡Œꢂꢀ‡’ꢀ
‡Œƒ’Š—ꢀ‹—ꢀƒ–Ž‘ƒꢀ—“ꢀ’ꢀ†˜‚“‘ꢀ”Š’ꢂƒ‘ꢀꢀ’†ƒꢀ‡‘‰‘Ɠ
ƨꢀ If this product has user-replaceable batteries, replace batteries only
as described in your user’s manual.ꢀ ꢅꢀ Œ’ꢀ €“Œꢀ ꢀ Ž“Œ’“ƒꢀ €’’ƒ‡ƒ‘ꢀ
— they contain caustic chemicals.
ƨꢀ If this product has a three-prong (grounding) plug or a polarized plug
with one wide prong, it may not fit in non-polarized outlets. ꢅꢀŒ’ꢀ‚ƒ„ƒ’ꢀ
the purpose of these plugs. If they do not fit in your outlet, the outlet
should be replaced by an electrician.
CAUTION: Use only the power adapter provided with this prod-
att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
38
ɇŽŽƒŒ‚‡–
Important safety instructions
Especially About Cordless Telephones
ƨꢀ Privacy: The same features that make a cordless phone convenient create
some limitations. Telephone calls are transmitted between the telephone
base and handset by radio waves, so there is a possibility that your cord-
less phone conversations could be intercepted by radio receiving equip-
ment within range of the cordless handset. For this reason, you should
not think of cordless phone conversations as being as private as those
on corded phones.
ƨꢀ Electrical power: The telephone base of this cordless telephone must be
connected to a working electrical outlet. The electrical outlet should not be
controlled by a wall switch. Calls cannot be made from the handset if the
telephone base is unplugged or switched off, or if the electrical power
is interrupted.
ƨꢀ Power adapter: This power adapter is intended to be plugged into a vertical
wall outlet or a floor outlet.
ƨꢀ Potential TV interference: Some cordless telephones operate at frequencies
’†’ꢀ‹—ꢀ“‘ƒꢀ‡Œ’ƒ„ƒƒŒƒꢀ’ꢀꢌꢓ‘ꢀŒ‚ꢀꢓꢇꢈ‘Ɠꢀꢌꢀ‹‡Œ‡‹‡˜ƒꢀꢀŽƒ”ƒŒ’ꢀ‘“†ꢀ‡Œ’ƒ-
ference, do not place the telephone base of the cordless telephone near or on
’Žꢀ„ꢀꢀꢌꢓꢀꢀꢓꢇꢈƓꢀꢉ„ꢀ‡Œ’ƒ„ƒƒŒƒꢀ‡‘ꢀƒ–Žƒ‡ƒŒƒ‚Ɛꢀ‹”‡Œꢂꢀ’†ƒꢀ‚Šƒ‘‘ꢀ’ƒŠƒŽ†Œƒꢀ
„’†ƒꢀ•—ꢀ„‹ꢀ’†ƒꢀꢌꢓꢀꢀꢓꢇꢈꢀ•‡ŠŠꢀ„’ƒŒꢀƒ‚“ƒꢀꢀƒŠ‡‹‡Œ’ƒꢀ’†ƒꢀ‡Œ’ƒ„ƒƒŒƒƓꢀ
ƨꢀ Rechargeable batteries:ꢀ ꢌ†‡‘ꢀ Ž‚“’ꢀ Œ’‡Œ‘ꢀ ƒ‡’†ƒꢀ ꢐ‡‰ƒŠƕꢇ‚‹‡“‹ꢀ ꢀ
ꢐ‡‰ƒŠƕꢒƒ’Šꢀ —‚‡‚ƒꢀƒ†ꢂƒ€Šƒꢀ€’’ƒ‡ƒ‘Ɠꢀꢊ–ƒ‡‘ƒꢀƒꢀ‡Œꢀ†Œ‚Š‡Œꢂꢀ€’’ƒ-
ies in order not to short the battery with conducting material such as rings,
bracelets, and keys. The battery or conductor may overheat and cause harm.
ꢋ€‘ƒ”ƒꢀŽŽƒꢀŽŠ‡’—ꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀ€’’ƒ—ꢀŒ‚ꢀ’†ƒꢀ€’’ƒ—ꢀ†ꢂƒƓ
ƨꢀ Nickel-cadmium rechargeable batteries: Must be recycled or disposed of
ŽŽƒŠ—ƓꢀꢅꢀŒ’ꢀ‚‡‘Ž‘ƒꢀ„ꢀ‡Œꢀ†“‘ƒ†Š‚ꢀꢂ€ꢂƒƓꢀꢅꢀŒ’ꢀ€“ŒꢀꢀŽ“Œ’“ƒƓꢀ
ꢆ‡‰ƒꢀ’†ƒꢀ€’’ƒ‡ƒ‘ꢀ„ꢀ’†‡‘ꢀ’—ŽƒƐꢀ‡„ꢀ€“Œƒ‚ꢀꢀŽ“Œ’“ƒ‚Ɛꢀ’†ƒ—ꢀ“Š‚ꢀƒŠƒ‘ƒꢀ
caustic material which could cause injury.
ꢌ†ƒꢀꢈɆꢈꢇ™ Seal means that the manufacturer is voluntarily participating in an industry
program to collect and recycle nickel-cadmium rechargeable batteries when taken
out of service within the United States. These batteries may be taken to a participating
ŠŠꢀƒ’‡Šƒꢀ„ꢀƒŽŠƒ‹ƒŒ’ꢀ€’’ƒ‡ƒ‘ꢀꢀƒ—Š‡ŒꢂꢀƒŒ’ƒƓꢀꢋꢀ—“ꢀ‹—ꢀŠŠꢀǍꢀƪǔnjnjƫꢀǔꢀɆɇꢌꢌꢊꢈꢏꢀ„ꢀ
locations accepting spent nickel-cadmium Batteries.
39
ɇŽŽƒŒ‚‡–
Important safety instructions
ƨꢀ Nickel-metal hydride rechargeable batteries: ꢅ‡‘Ž‘ƒꢀ„ꢀ’†ƒ‘ƒꢀ€’’ƒ‡ƒ‘ꢀ
‡Œꢀꢀ‘„ƒꢀ‹ŒŒƒƓꢀꢅꢀŒ’ꢀ€“ŒꢀꢀŽ“Œ’“ƒƓꢀꢆ‡‰ƒꢀ’†ƒꢀ€’’ƒ‡ƒ‘ꢀ„ꢀ’†‡‘ꢀ’—ŽƒƐꢀ
if burned or punctured, they could release caustic material which could
cause injury.
ꢌ†ƒꢀꢈɆꢈꢇ™ Seal means that the manufacturer is voluntarily participating in an industry
program to collect and recycle nickel-metal rechargeable batteries when taken out of
service within the United States. These batteries may be taken to a participating local
ƒ’‡Šƒꢀ„ꢀƒŽŠƒ‹ƒŒ’ꢀ€’’ƒ‡ƒ‘ꢀꢀƒ—Š‡ŒꢂꢀƒŒ’ƒƓꢀꢋꢀ—“ꢀ‹—ꢀŠŠꢀǍꢀƪǔnjnjƫꢀǔꢀɆɇꢌꢌꢊꢈꢏꢀ„ꢀŠ’‡Œ‘ꢀ
accepting spent nickel-metal Batteries.
Precautions for users of implanted cardiac pacemakers
ꢇ‚‡ꢀŽƒ‹‰ƒ‘ꢀƪŽŽŠ‡ƒ‘ꢀŒŠ—ꢀ’ꢀ‚‡ꢂ‡’Šꢀ‚Šƒ‘‘ꢀ’ƒŠƒŽ†Œƒ‘ƫƒꢀ
ꢔ‡ƒŠƒ‘‘ꢀꢌƒ†ŒŠꢂ—ꢀꢈƒ‘ƒ†ƐꢀꢆꢆꢇꢀƪꢔꢌꢈƫƐꢀŒꢀ‡Œ‚ƒŽƒŒ‚ƒŒ’ꢀƒ‘ƒ†ꢀƒŒ’‡’—ƐꢀŠƒ‚ꢀ
a multidisciplinary evaluation of the interference between portable wireless
telephones and implanted cardiac pacemakers. Supported by the U.S. Food
Œ‚ꢀꢅ“ꢂꢀɇ‚‹‡Œ‡‘’’‡ŒƐꢀꢔꢌꢈꢀ†‚ꢀƒ‹‹ƒŒ‚ƒ‚ꢀ’ꢀŽ†—‘‡‡Œ‘ꢀ’†’ƒ
Pacemaker patients
ƨꢀꢃ†“Š‚ꢀ‰ƒƒŽꢀ•‡ƒŠƒ‘‘ꢀŽ†Œƒ‘ꢀ’ꢀŠƒ‘’ꢀ‘‡–ꢀ‡Œ†ƒ‘ꢀ„‹ꢀ’†ƒꢀŽƒ‹‰ƒƓ
ƨꢀꢃ†“Š‚ꢀꢐꢋꢌꢀŽŠƒꢀ•‡ƒŠƒ‘‘ꢀŽ†Œƒ‘ꢀ‚‡ƒ’Š—ꢀ”ƒꢀ’†ƒꢀŽƒ‹‰ƒƐꢀ‘“†ꢀ‘ꢀ‡Œꢀꢀ
€ƒ‘’ꢀŽ‰ƒ’Ɛꢀ•†ƒŒꢀ‡’ꢀ‡‘ꢀ’“Œƒ‚ꢀꢋꢐƓ
ƨꢀꢃ†“Š‚ꢀ“‘ƒꢀ’†ƒꢀ•‡ƒŠƒ‘‘ꢀŽ†Œƒꢀ’ꢀ’†ƒꢀƒꢀŽŽ‘‡’ƒꢀ’†ƒꢀŽƒ‹‰ƒƓ
ꢔꢌꢈƛ‘ꢀƒ”Š“’‡Œꢀ‚‡‚ꢀŒ’ꢀ‡‚ƒŒ’‡„—ꢀŒ—ꢀ‡‘‰ꢀ’ꢀ€—‘’Œ‚ƒ‘ꢀ•‡’†ꢀŽƒ‹‰ƒ‘ꢀ„‹ꢀ
other persons using wireless phones.
Especially about telephones answering systems
Two-way recording:This telephone does not sound warning beeps to let the other
party know that the call is being recorded. To ensure that you are in compliance
with any federal or state regulations regarding recording a telephone call, you
should start the recording process and then inform the other party that you are
recording the call.
SAVE THESE INSTRUCTIONS
40
ɇŽŽƒŒ‚‡–
FCC Part 68 & ACTA
ꢌ†‡‘ꢀ ƒ“‡Ž‹ƒŒ’ꢀ ‹ŽŠ‡ƒ‘ꢀ •‡’†ꢀ ꢎ’ꢀ ǒǔꢀ „ꢀ ’†ƒꢀ ꢍꢇꢇꢀ “Šƒ‘ꢀ Œ‚ꢀ •‡’†ꢀ ’ƒ†Œ‡Šꢀ
ƒ“‡ƒ‹ƒŒ’‘ꢀ‚Ž’ƒ‚ꢀ€—ꢀ’†ƒꢀɇ‚‹‡Œ‡‘’’‡”ƒꢀꢇ“Œ‡Šꢀ„ꢀꢌƒ‹‡ŒŠꢀɇ’’†‹ƒŒ’‘ꢀ
ƪɇꢇꢌɇƫƓꢀꢌ†ƒꢀŠ€ƒŠꢀŒꢀ’†ƒꢀ€‰ꢀꢀ€’’‹ꢀ„ꢀ’†‡‘ꢀƒ“‡Ž‹ƒŒ’ꢀŒ’‡Œ‘Ɛꢀ‹Œꢂꢀ
other things, a product identifier in the format US: AAAEQ##TXXXX. This iden-
tifier must be provided to your local telephone company upon request.
The plug and jack used to connect this equipment to premises wiring and the
’ƒŠƒŽ†ŒƒꢀŒƒ’•‰ꢀ‹“‘’ꢀ‹ŽŠ—ꢀ•‡’†ꢀŽŽŠ‡€Šƒꢀꢎ’ꢀǒǔꢀ“Šƒ‘ꢀŒ‚ꢀ’ƒ†Œ‡Šꢀ
ƒ“‡ƒ‹ƒŒ’‘ꢀ‚Ž’ƒ‚ꢀ€—ꢀɇꢇꢌɇƓꢀɇꢀ‹ŽŠ‡Œ’ꢀ’ƒŠƒŽ†Œƒꢀ‚ꢀŒ‚ꢀ‹‚“ŠꢀŽŠ“ꢂꢀ
is provided with this product. It is designed to be connected to a compatible
‹‚“Šꢀˆ‰ꢀ’†’ꢀ‡‘ꢀŠ‘ꢀ‹ŽŠ‡Œ’ƓꢀɇŒꢀꢈꢕǍǍꢀˆ‰ꢀ‘†“Š‚ꢀŒ‹ŠŠ—ꢀ€ƒꢀ“‘ƒ‚ꢀ
„ꢀŒŒƒ’‡Œꢂꢀ’ꢀꢀ‘‡ŒꢂŠƒꢀŠ‡ŒƒꢀŒ‚ꢀŒꢀꢈꢕǍǐꢀˆ‰ꢀ„ꢀ’•ꢀŠ‡Œƒ‘ƓꢀꢃƒƒꢀꢉŒ‘’ŠŠ’‡Œꢀ
Instructions in the user’s manual.
ꢌ†ƒꢀꢈ‡Œꢂƒꢀꢊ“‡”ŠƒŒƒꢀꢐ“‹€ƒꢀƪꢈꢊꢐƫꢀ‡‘ꢀ“‘ƒ‚ꢀ’ꢀ‚ƒ’ƒ‹‡Œƒꢀ†•ꢀ‹Œ—ꢀ‚ƒ”‡ƒ‘ꢀ
you may connect to your telephone line and still have them ring when you
ƒꢀŠŠƒ‚Ɠꢀꢌ†ƒꢀꢈꢊꢐꢀ„ꢀ’†‡‘ꢀŽ‚“’ꢀ‡‘ꢀƒŒ‚ƒ‚ꢀ‘ꢀ’†ƒꢀǒ’†ꢀŒ‚ꢀǓ’†ꢀ†’ƒ‘ꢀ
„ŠŠ•‡Œꢂꢀ’†ƒꢀꢁꢃƒꢀ‡Œꢀ’†ƒꢀŽ‚“’ꢀ‡‚ƒŒ’‡„‡ƒꢀƪƒƓꢂƓƐꢀ‡„ꢀNJNJꢀ‡‘ꢀnjǏƐꢀ’†ƒꢀꢈꢊꢐꢀ‡‘ꢀnjƓǏƫƓꢀꢉŒꢀ
‹‘’Ɛꢀ€“’ꢀŒ’ꢀŠŠꢀƒ‘Ɛꢀ’†ƒꢀ‘“‹ꢀ„ꢀŠŠꢀꢈꢊꢐ‘ꢀ‘†“Š‚ꢀ€ƒꢀ„‡”ƒꢀƪǑƓnjƫꢀꢀŠƒ‘‘Ɠꢀꢍꢀ
more information, please contact your local telephone company.
ꢌ†‡‘ꢀƒ“‡Ž‹ƒŒ’ꢀ‹—ꢀŒ’ꢀ€ƒꢀ“‘ƒ‚ꢀ•‡’†ꢀꢎ’—ꢀꢆ‡Œƒ‘Ɠꢀꢉ„ꢀ—“ꢀ†”ƒꢀ‘Žƒ‡ŠŠ—ꢀ•‡ƒ‚ꢀ
alarm dialing equipment connected to your telephone line, ensure the con-
nection of this equipment does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone
company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular
ˆ‰ꢀ“Œ’‡Šꢀ’†ƒꢀŽ€Šƒ‹ꢀ†‘ꢀ€ƒƒŒꢀƒ’ƒ‚ƓꢀꢈƒŽ‡‘ꢀ’ꢀ’†‡‘ꢀ’ƒŠƒŽ†Œƒꢀƒ“‡Ž-
ment can only be made by the manufacturer or its authorized agents. For
ƒŽ‡ꢀŽƒ‚“ƒ‘Ɛꢀ„ŠŠ•ꢀ’†ƒꢀ‡Œ‘’“’‡Œ‘ꢀ“’Š‡Œƒ‚ꢀ“Œ‚ƒꢀ’†ƒꢀꢆ‡‹‡’ƒ‚ꢀꢔŒ’—Ɠ
If this equipment is causing harm to the telephone network, the telephone
company may temporarily discontinue your telephone service. The telephone
company is required to notify you before interrupting service. If advance
notice is not practical, you will be notified as soon as possible. You will be
given the opportunity to correct the problem and the telephone company
‡‘ꢀƒ“‡ƒ‚ꢀ’ꢀ‡Œ„‹ꢀ—“ꢀ„ꢀ—“ꢀ‡ꢂ†’ꢀ’ꢀ„‡Šƒꢀꢀ‹ŽŠ‡Œ’ꢀ•‡’†ꢀ’†ƒꢀꢍꢇꢇƓꢀꢏ“ꢀ
telephone company may make changes in its facilities, equipment, operation,
or procedures that could affect the proper functioning of this product. The
telephone company is required to notify you if such changes are planned.
41
ɇŽŽƒŒ‚‡–
FCC Part 68 and ACTA
If this product is equipped with a corded or cordless handset, it is hearing aid
compatible.
If this product has memory dialing locations, you may choose to store emer-
gency telephone numbers (e.g., police, fire, medical) in these locations. If you
do store or test emergency numbers, please:
ƨꢀ ꢈƒ‹‡ŒꢀŒꢀ’†ƒꢀŠ‡ŒƒꢀŒ‚ꢀ€‡ƒ„Š—ꢀƒ–ŽŠ‡Œꢀ’†ƒꢀƒ‘Œꢀ„ꢀ’†ƒꢀŠŠꢀ€ƒ„ƒꢀ†Œꢂ-
ing up.
ƨꢀ ꢎƒ„‹ꢀ ‘“†ꢀ ’‡”‡’‡ƒ‘ꢀ ‡Œꢀ „„ƕŽƒ‰ꢀ †“‘Ɛꢀ ‘“†ꢀ ‘ꢀ ƒŠ—ꢀ ‹Œ‡Œꢂꢀ ꢀ Š’ƒꢀ
evening.
42
ɇŽŽƒŒ‚‡–
FCC Part 15
This equipment has been tested and found to comply with the requirements
„ꢀ ꢀ ꢇŠ‘‘ꢀ Ɇꢀ ‚‡ꢂ‡’Šꢀ ‚ƒ”‡ƒꢀ “Œ‚ƒꢀ ꢎ’ꢀ ǍǑꢀ „ꢀ ’†ƒꢀ ꢍƒ‚ƒŠꢀ ꢇ‹‹“Œ‡’‡Œ‘ꢀ
ꢇ‹‹‡‘‘‡Œꢀƪꢍꢇꢇƫꢀ“Šƒ‘Ɠꢀꢀ
These requirements are intended to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the follow-
ing measures:
ƨꢀꢀꢈƒ‡ƒŒ’ꢀꢀƒŠ’ƒꢀ’†ƒꢀƒƒ‡”‡ŒꢂꢀŒ’ƒŒŒƓ
ƨꢀ ꢉŒƒ‘ƒꢀ’†ƒꢀ‘ƒŽ’‡Œꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀƒ“‡Ž‹ƒŒ’ꢀŒ‚ꢀƒƒ‡”ƒƓ
ƨꢀ ꢇŒŒƒ’ꢀ ’†ƒꢀ ƒ“‡Ž‹ƒŒ’ꢀ ‡Œ’ꢀ Œꢀ “’Šƒ’ꢀ Œꢀ ꢀ ‡“‡’ꢀ ‚‡„„ƒƒŒ’ꢀ „‹ꢀ ’†’ꢀ ’ꢀ
which the receiver is connected.
ƨꢀ ꢇŒ‘“Š’ꢀ’†ƒꢀ‚ƒŠƒꢀꢀŒꢀƒ–Žƒ‡ƒŒƒ‚ꢀ‚‡Ƥꢌꢓꢀ’ƒ†Œ‡‡Œꢀ„ꢀ†ƒŠŽƓ
ꢇ†Œꢂƒ‘ꢀ ꢀ ‹‚‡„‡’‡Œ‘ꢀ ’ꢀ ’†‡‘ꢀ ƒ“‡Ž‹ƒŒ’ꢀ Œ’ꢀ ƒ–Žƒ‘‘Š—ꢀ ŽŽ”ƒ‚ꢀ €—ꢀ ’†ƒꢀ
party responsible for compliance could void the user’s authority to operate
the equipment.
ꢌꢀƒŒ‘“ƒꢀ‘„ƒ’—ꢀ„ꢀ“‘ƒ‘Ɛꢀ’†ƒꢀꢍꢇꢇꢀ†‘ꢀƒ‘’€Š‡‘†ƒ‚ꢀ‡’ƒ‡ꢀ„ꢀ’†ƒꢀ‹“Œ’ꢀ„ꢀ
radio frequency energy that can be safely absorbed by a user or bystander
according to the intended usage of the product. This product has been tested
Œ‚ꢀ„“Œ‚ꢀ’ꢀ‹ŽŠ—ꢀ•‡’†ꢀ’†ƒꢀꢍꢇꢇꢀ‡’ƒ‡Ɠꢀꢌ†ƒꢀ†Œ‚‘ƒ’ꢀ‹—ꢀ€ƒꢀ‘„ƒŠ—ꢀ†ƒŠ‚ꢀ
against the ear of the user. The telephone base shall be installed and used
such that parts of the user’s body other than the hands are maintained at a
‚‡‘’Œƒꢀ„ꢀŽŽ–‡‹’ƒŠ—ꢀǎnjꢀ‹ꢀƪǔꢀ‡Œ†ƒ‘ƫꢀꢀ‹ƒƓꢀꢉ„ꢀ—“ꢀ†‘ƒꢀ’ꢀ“‘ƒꢀꢀ
clipping device, please make sure to only use the supplied AT&T belt clip.
43
ɇŽŽƒŒ‚‡–
Limited warranty
The AT&T brand is used under license - any repair, replacement
or warranty service, and all questions about this product should
be directed to: In the United States of America visit our website
dial 1 (866) 288-4268.
ǍƓꢀꢔ†’ꢀ‚ƒ‘ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ꢀ”ƒƘ
The manufacturer of this AT&T-branded product warrants to the holder of
ꢀ ”Š‡‚ꢀ Ž„ꢀ „ꢀ Ž“†‘ƒꢀ ƪƜꢇꢋꢐꢃꢁꢒꢊꢈƝꢀ ꢀ Ɯ—“Ɲƫꢀ ’†’ꢀ ’†ƒꢀ Ž‚“’ꢀ Œ‚ꢀ ŠŠꢀ
ƒ‘‘‡ƒ‘ꢀŽ”‡‚ƒ‚ꢀ‡Œꢀ’†ƒꢀ‘Šƒ‘ꢀŽ‰ꢂƒꢀƪƜꢎꢈꢋꢅꢁꢇꢌƝƫꢀƒꢀ„ƒƒꢀ„‹ꢀ‚ƒ„ƒ’‘ꢀ
in material and workmanship, pursuant to the following terms and conditions,
•†ƒŒꢀ‡Œ‘’ŠŠƒ‚ꢀŒ‚ꢀ“‘ƒ‚ꢀŒ‹ŠŠ—ꢀŒ‚ꢀ‡Œꢀ‚Œƒꢀ•‡’†ꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀŽƒ-
’‡Œꢂꢀ‡Œ‘’“’‡Œ‘Ɠꢀꢌ†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ꢀƒ–’ƒŒ‚‘ꢀŒŠ—ꢀ’ꢀ’†ƒꢀꢇꢋꢐꢃꢁꢒꢊꢈꢀ„ꢀ
Ž‚“’‘ꢀŽ“†‘ƒ‚ꢀŒ‚ꢀ“‘ƒ‚ꢀ‡Œꢀ’†ƒꢀꢁŒ‡’ƒ‚ꢀꢃ’’ƒ‘ꢀ„ꢀɇ‹ƒ‡ꢀŒ‚ꢀꢇŒ‚Ɠ
ǎƓꢀ ꢔ†’ꢀ •‡ŠŠꢀ €ƒꢀ ‚Œƒꢀ ‡„ꢀ ’†ƒꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ ‡‘ꢀ Œ’ꢀ „ƒƒꢀ „‹ꢀ ‚ƒ„ƒ’‘ꢀ ‡Œꢀ ‹’ƒ‡Š‘ꢀ
and workmanship during the limited warranty period (“materially defective
ꢎꢈꢋꢅꢁꢇꢌƝƫƘ
ꢀ ꢅ“‡Œꢂꢀ ’†ƒꢀ Š‡‹‡’ƒ‚ꢀ •Œ’—ꢀ Žƒ‡‚Ɛꢀ ’†ƒꢀ ‹Œ“„’“ƒƛ‘ꢀ “’†‡˜ƒ‚ꢀ ‘ƒ”‡ƒꢀ
representative will repair or replace at the manufacturer’s option, without
†ꢂƒƐꢀ ꢀ ‹’ƒ‡ŠŠ—ꢀ ‚ƒ„ƒ’‡”ƒꢀ ꢎꢈꢋꢅꢁꢇꢌƓꢀ ꢉ„ꢀ ’†ƒꢀ ‹Œ“„’“ƒꢀ ƒŽ‡‘ꢀ ’†ƒꢀ
ꢎꢈꢋꢅꢁꢇꢌƐꢀ’†ƒ—ꢀ‹—ꢀ“‘ƒꢀŒƒ•ꢀꢀƒ„“€‡‘†ƒ‚ꢀƒŽŠƒ‹ƒŒ’ꢀŽ’‘Ɠꢀꢉ„ꢀ’†ƒꢀ‹Œ-
“„’“ƒꢀ†‘ƒ‘ꢀ’ꢀƒŽŠƒꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌƐꢀ’†ƒ—ꢀ‹—ꢀƒŽŠƒꢀ‡’ꢀ•‡’†ꢀꢀŒƒ•ꢀ
ꢀƒ„“€‡‘†ƒ‚ꢀꢎꢈꢋꢅꢁꢇꢌꢀ„ꢀ’†ƒꢀ‘‹ƒꢀꢀ‘‡‹‡Šꢀ‚ƒ‘‡ꢂŒƓꢀꢌ†ƒꢀ‹Œ“„’“ƒꢀ
•‡ŠŠꢀƒ’‡Œꢀ‚ƒ„ƒ’‡”ƒꢀŽ’‘Ɛꢀ‹‚“Šƒ‘Ɛꢀꢀƒ“‡Ž‹ƒŒ’ƓꢀꢈƒŽ‡ꢀꢀƒŽŠƒ‹ƒŒ’ꢀ„ꢀ
’†ƒꢀꢎꢈꢋꢅꢁꢇꢌƐꢀ’ꢀ’†ƒꢀ‹Œ“„’“ƒƛ‘ꢀŽ’‡ŒƐꢀ‡‘ꢀ—“ꢀƒ–Š“‘‡”ƒꢀƒ‹ƒ‚—Ɠꢀꢌ†ƒꢀ
manufacturer will return repaired or replacement products to you in work-
‡ŒꢂꢀŒ‚‡’‡ŒƓꢀꢏ“ꢀ‘†“Š‚ꢀƒ–Žƒ’ꢀ’†ƒꢀƒŽ‡ꢀꢀƒŽŠƒ‹ƒŒ’ꢀ’ꢀ’‰ƒꢀŽŽ–‡-
mately 30 days.
ǏƓꢀ •ꢀŠŒꢂꢀ‡‘ꢀ’†ƒꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ꢀŽƒ‡‚Ƙ
ꢀ ꢌ†ƒꢀ Š‡‹‡’ƒ‚ꢀ •Œ’—ꢀ Žƒ‡‚ꢀ „ꢀ ’†ƒꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ ƒ–’ƒŒ‚‘ꢀ „ꢀ ꢋꢐꢊꢀ ƪǍƫꢀ ꢏꢊɇꢈꢀ
from the date of purchase. If the manufacturer repairs or replaces a materi-
ŠŠ—ꢀ‚ƒ„ƒ’‡”ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀ“Œ‚ƒꢀ’†ƒꢀ’ƒ‹‘ꢀ„ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—Ɛꢀ’†‡‘ꢀŠ‡‹‡’-
ƒ‚ꢀ•Œ’—ꢀŠ‘ꢀŽŽŠ‡ƒ‘ꢀ’ꢀƒŽ‡ƒ‚ꢀꢀƒŽŠƒ‹ƒŒ’ꢀꢎꢈꢋꢅꢁꢇꢌꢀ„ꢀꢀŽƒ‡‚ꢀ
„ꢀƒ‡’†ƒꢀƪƫꢀǕnjꢀ‚—‘ꢀ„‹ꢀ’†ƒꢀ‚’ƒꢀ’†ƒꢀƒŽ‡ƒ‚ꢀꢀƒŽŠƒ‹ƒŒ’ꢀꢎꢈꢋꢅꢁꢇꢌꢀ
is shipped to you or (b) the time remaining on the original one-year limited
warranty; whichever is longer.
44
ɇŽŽƒŒ‚‡–
Limited warranty
ǐƓꢀꢔ†’ꢀ‡‘ꢀŒ’ꢀ”ƒƒ‚ꢀ€—ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—Ƙ
This limited warranty does not cover:
ƨꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ’†’ꢀ†‘ꢀ€ƒƒŒꢀ‘“€ˆƒ’ƒ‚ꢀ’ꢀ‹‡‘“‘ƒƐꢀ‡‚ƒŒ’Ɛꢀ‘†‡ŽŽ‡Œꢂꢀꢀ’†ƒꢀ
physical damage, improper installation, abnormal operation or handling,
neglect, inundation, fire, water, or other liquid intrusion; or
ƨꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ’†’ꢀ†‘ꢀ€ƒƒŒꢀ‚‹ꢂƒ‚ꢀ‚“ƒꢀ’ꢀƒŽ‡ƐꢀŠ’ƒ’‡ŒƐꢀꢀ‹‚‡„‡-
tion by anyone other than an authorized service representative of the
manufacturer; or
ƨꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ’ꢀ’†ƒꢀƒ–’ƒŒ’ꢀ’†’ꢀ’†ƒꢀŽ€Šƒ‹ꢀƒ–Žƒ‡ƒŒƒ‚ꢀ‡‘ꢀ“‘ƒ‚ꢀ€—ꢀ‘‡ꢂŒŠꢀ
conditions, network reliability or cable or antenna systems; or
ƨꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ’ꢀ’†ƒꢀƒ–’ƒŒ’ꢀ’†’ꢀ’†ƒꢀŽ€Šƒ‹ꢀ‡‘ꢀ“‘ƒ‚ꢀ€—ꢀ“‘ƒꢀ•‡’†ꢀŒŒƕɇꢌſꢌꢀ
accessories; or
ƨꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ •†‘ƒꢀ •Œ’—Ƥ“Š‡’—ꢀ ‘’‡‰ƒ‘Ɛꢀ ꢎꢈꢋꢅꢁꢇꢌꢀ ‘ƒ‡Šꢀ Œ“‹€ƒꢀ
plates or electronic serial numbers have been removed, altered or ren-
dered illegible; or
ƨꢀ ꢎꢈꢋꢅꢁꢇꢌꢀŽ“†‘ƒ‚Ɛꢀ“‘ƒ‚Ɛꢀ‘ƒ”‡ƒ‚Ɛꢀꢀ‘†‡ŽŽƒ‚ꢀ„ꢀƒŽ‡ꢀ„‹ꢀ“’‘‡‚ƒꢀ’†ƒꢀ
ꢁŒ‡’ƒ‚ꢀꢃ’’ƒ‘ꢀ„ꢀɇ‹ƒ‡ꢀꢀꢇŒ‚Ɛꢀꢀ“‘ƒ‚ꢀ„ꢀ‹‹ƒ‡Šꢀꢀ‡Œ‘’‡’“’‡ŒŠꢀ
purposes (including but not limited to products used for rental purposes); or
ƨꢀ ꢎꢈꢋꢅꢁꢇꢌꢀƒ’“Œƒ‚ꢀ•‡’†“’ꢀ”Š‡‚ꢀŽ„ꢀ„ꢀŽ“†‘ƒꢀƪ‘ƒƒꢀ‡’ƒ‹ꢀǒꢀ€ƒŠ•ƫƑꢀ
ƨꢀ ꢇ†ꢂƒ‘ꢀ„ꢀ‡Œ‘’ŠŠ’‡Œꢀꢀ‘ƒ’“ŽƐꢀ‚ˆ“‘’‹ƒŒ’ꢀ„ꢀ“‘’‹ƒꢀŒ’Š‘ƐꢀŒ‚ꢀ
installation or repair of systems outside the telephone.
ǑƓꢀ •ꢀ‚ꢀ—“ꢀꢂƒ’ꢀ•Œ’—ꢀ‘ƒ”‡ƒƘ
To obtain warranty service in the United States of America, call
1 (800) 222-3111; In Canada, please dial 1 (866) 288-4268.
ꢐꢋꢌꢊƒꢀɆƒ„ƒꢀŠŠ‡Œꢂꢀ„ꢀ‘ƒ”‡ƒƐꢀŽŠƒ‘ƒꢀƒ”‡ƒ•ꢀ’†ƒꢀ“‘ƒƛ‘ꢀ‹Œ“Šꢀƕꢀꢀ†ƒ‰ꢀ„ꢀ
’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀŒ’Š‘ꢀŒ‚ꢀ„ƒ’“ƒ‘ꢀ‹—ꢀ‘”ƒꢀ—“ꢀꢀ‘ƒ”‡ƒꢀŠŠƓ
ꢀ ꢊ–ƒŽ’ꢀ‘ꢀŽ”‡‚ƒ‚ꢀ€—ꢀŽŽŠ‡€ŠƒꢀŠ•Ɛꢀ—“ꢀ‘‘“‹ƒꢀ’†ƒꢀ‡‘‰ꢀ„ꢀŠ‘‘ꢀꢀ‚‹ꢂƒꢀ
during transit and transportation and are responsible for delivery or handling
†ꢂƒ‘ꢀ‡Œ“ƒ‚ꢀ‡Œꢀ’†ƒꢀ’Œ‘Ž’ꢀ„ꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌƪ‘ƫꢀ’ꢀ’†ƒꢀ‘ƒ”‡ƒꢀŠ’‡ŒƓꢀ
ꢌ†ƒꢀ‹Œ“„’“ƒꢀ•‡ŠŠꢀƒ’“ŒꢀƒŽ‡ƒ‚ꢀꢀƒŽŠƒ‚ꢀꢎꢈꢋꢅꢁꢇꢌꢀ“Œ‚ƒꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ
warranty to you, transportation, delivery or handling charges prepaid. The
‹Œ“„’“ƒꢀ‘‘“‹ƒ‘ꢀŒꢀ‡‘‰ꢀ„ꢀ‚‹ꢂƒꢀꢀŠ‘‘ꢀ„ꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀ‡Œꢀ’Œ‘‡’Ɠꢀ
ꢉ„ꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀ„‡Š“ƒꢀ‡‘ꢀŒ’ꢀ”ƒƒ‚ꢀ€—ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ƐꢀꢀŽ„ꢀ„ꢀŽ“-
chase does not meet the terms of this limited warranty, the manufacturer will
notify you and will request that you authorize the cost of repair prior to any
further repair activity. You must pay for the cost of repair and return shipping
costs for the repair of products that are not covered by this limited warranty.
45
ɇŽŽƒŒ‚‡–
Limited warranty
ǒƓꢀꢔ†’ꢀ‹“‘’ꢀ—“ꢀƒ’“Œꢀ•‡’†ꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀ’ꢀꢂƒ’ꢀ•Œ’—ꢀ‘ƒ”‡ƒƘ
You must:
Ɠꢀꢈƒ’“Œꢀ’†ƒꢀƒŒ’‡ƒꢀ‡ꢂ‡ŒŠꢀŽ‰ꢂƒꢀŒ‚ꢀŒ’ƒŒ’‘ꢀ‡ŒŠ“‚‡Œꢂꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀ
to the service location along with a description of the malfunction or dif-
ficulty; and
€ƓꢀꢉŒŠ“‚ƒꢀƜ”Š‡‚ꢀŽ„ꢀ„ꢀŽ“†‘ƒƝꢀƪ‘Šƒ‘ꢀƒƒ‡Ž’ƫꢀ‡‚ƒŒ’‡„—‡Œꢂꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀ
Ž“†‘ƒ‚ꢀƪꢎꢈꢋꢅꢁꢇꢌꢀ‹‚ƒŠƫꢀŒ‚ꢀ’†ƒꢀ‚’ƒꢀ„ꢀŽ“†‘ƒꢀꢀƒƒ‡Ž’ƑꢀŒ‚
c. Provide your name, complete and correct mailing address, and telephone
number.
ǓƓꢀꢋ’†ƒꢀŠ‡‹‡’’‡Œ‘
ꢀ ꢌ†‡‘ꢀ•Œ’—ꢀ‡‘ꢀ’†ƒꢀ‹ŽŠƒ’ƒꢀŒ‚ꢀƒ–Š“‘‡”ƒꢀꢂƒƒ‹ƒŒ’ꢀ€ƒ’•ƒƒŒꢀ—“ꢀŒ‚ꢀ’†ƒꢀ
‹Œ“„’“ƒꢀ„ꢀ’†‡‘ꢀɇꢌſꢌꢀ€Œ‚ƒ‚ꢀꢎꢈꢋꢅꢁꢇꢌƓꢀꢉ’ꢀ‘“Žƒ‘ƒ‚ƒ‘ꢀŠŠꢀ’†ƒꢀ•‡’’ƒŒꢀ
ꢀŠꢀ‹‹“Œ‡’‡Œ‘ꢀƒŠ’ƒ‚ꢀ’ꢀ’†‡‘ꢀꢎꢈꢋꢅꢁꢇꢌƓꢀꢌ†ƒꢀ‹Œ“„’“ƒꢀŽ”‡‚ƒ‘ꢀ
Œꢀ’†ƒꢀ•Œ’‡ƒ‘ꢀ„ꢀ’†‡‘ꢀꢎꢈꢋꢅꢁꢇꢌƓꢀꢌ†ƒꢀ•Œ’—ꢀƒ–Š“‘‡”ƒŠ—ꢀ‚ƒ‘‡€ƒ‘ꢀŠŠꢀ
„ꢀ ’†ƒꢀ ‹Œ“„’“ƒƛ‘ꢀ ƒ‘ŽŒ‘‡€‡Š‡’‡ƒ‘ꢀ ƒꢂ‚‡Œꢂꢀ ’†ƒꢀ ꢎꢈꢋꢅꢁꢇꢌƓꢀ ꢌ†ƒƒꢀ ƒꢀ Œꢀ
’†ƒꢀƒ–Žƒ‘‘ꢀ•Œ’‡ƒ‘ƓꢀꢐꢀŒƒꢀ‡‘ꢀ“’†‡˜ƒ‚ꢀ’ꢀ‹‰ƒꢀ‹‚‡„‡’‡Œ‘ꢀ’ꢀ’†‡‘ꢀ
limited warranty and you should not rely on any such modification.
ꢀ ꢃ’’ƒƤꢎ”‡Œ‡Šꢀ ꢆ•ꢀ ꢈ‡ꢂ†’‘ƒꢀ ꢌ†‡‘ꢀ •Œ’—ꢀ ꢂ‡”ƒ‘ꢀ —“ꢀ ‘Žƒ‡„‡ꢀ ŠƒꢂŠꢀ ‡ꢂ†’‘Ɛꢀ
and you may also have other rights which vary from state to state or prov-
ince to province.
ꢀ ꢆ‡‹‡’’‡Œ‘ƒꢀ ꢉ‹ŽŠ‡ƒ‚ꢀ •Œ’‡ƒ‘Ɛꢀ ‡ŒŠ“‚‡Œꢂꢀ ’†‘ƒꢀ „ꢀ „‡’Œƒ‘‘ꢀ „ꢀ ꢀ Ž’‡“Šꢀ
Ž“Ž‘ƒꢀŒ‚ꢀ‹ƒ†Œ’€‡Š‡’—ꢀƪŒꢀ“Œ•‡’’ƒŒꢀ•Œ’—ꢀ’†’ꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀ‡‘ꢀ
fit for ordinary use) are limited to one year from date of purchase. Some
‘’’ƒ‘ƤŽ”‡Œƒ‘ꢀ‚ꢀŒ’ꢀŠŠ•ꢀŠ‡‹‡’’‡Œ‘ꢀŒꢀ†•ꢀŠŒꢂꢀŒꢀ‡‹ŽŠ‡ƒ‚ꢀ•Œ’—ꢀ
lasts, so the above limitation may not apply to you. In no event shall the
manufacturer be liable for any indirect, special, incidental, consequential, or
similar damages (including, but not limited to lost profits or revenue, inabil-
‡’—ꢀ’ꢀ“‘ƒꢀ’†ƒꢀꢎꢈꢋꢅꢁꢇꢌꢀꢀ’†ƒꢀ‘‘‡’ƒ‚ꢀƒ“‡Ž‹ƒŒ’Ɛꢀ’†ƒꢀ‘’ꢀ„ꢀ‘“€‘’‡-
tute equipment, and claims by third parties) resulting from the use of this
ꢎꢈꢋꢅꢁꢇꢌƓꢀꢃ‹ƒꢀ‘’’ƒ‘ƤŽ”‡Œƒ‘ꢀ‚ꢀŒ’ꢀŠŠ•ꢀ’†ƒꢀƒ–Š“‘‡ŒꢀꢀŠ‡‹‡’’‡Œꢀ
„ꢀ‡Œ‡‚ƒŒ’ŠꢀꢀŒ‘ƒ“ƒŒ’‡Šꢀ‚‹ꢂƒ‘Ɛꢀ‘ꢀ’†ƒꢀ€”ƒꢀŠ‡‹‡’’‡Œꢀꢀƒ–Š“-
sion may not apply to you.
Please retain your original sales receipt as
proof of purchase.
ǐǒ
ɇŽŽƒŒ‚‡–
Technical specifications
RF frequency band
ǑǔǑǓƓǎꢒ ˜ꢀƧꢀǑǔǒǑƓǕꢒ ˜
(handset to telephone base)
RF frequency band
912.75 MHė — 917.10 MHz
(telephone base to handset)
Channels
30
Modulation
FM
Operating temperature
32°F — 122°F
njȻꢇꢀƧꢀǑnjȻꢇ
Telephone base voltage
(AC voltage, 60Hz)
104 — 129Vrms
Telephone base voltage
(AC adapter output)
ɇꢇ9V @250mA
Handset voltage
ꢅꢇ3.1 — 4.3V 400mAh
Rechargeable battery
ǏƓǒꢓꢀǐnjnj‹ɇ†
Telephone operating range
ꢌ†‡‘ꢀ‚Šƒ‘‘ꢀ’ƒŠƒŽ†ŒƒꢀŽƒ’ƒ‘ꢀ•‡’†ꢀ’†ƒꢀ‹–‡‹“‹ꢀŽ•ƒꢀŠŠ•ƒ‚ꢀ€—ꢀ’†ƒꢀꢍƒ‚ƒŠꢀ
ꢇ‹‹“Œ‡’‡Œ‘ꢀꢇ‹‹‡‘‘‡ŒꢀƪꢍꢇꢇƫƓꢀꢊ”ƒŒꢀ‘Ɛꢀ’†ƒꢀ†Œ‚‘ƒ’ꢀŒ‚ꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀŒꢀ
communicate over only a certain distance - which can vary with the locations of
the telephone base and handset, the weather, the layout, and the construction of
your home or office.
47
ɇŽŽƒŒ‚‡–
Index
A
I
Alert tones, 30
Answering calls, 14
Incoming call summary, 25
Incoming calls, answering, 14
Indicator lights, 30
B
L
Battery charging, 7
Battery installation, 7
Battery low, 7
ꢆ‘’ꢀŒ“‹€ƒꢀƒ‚‡ŠƐꢀǍǑ
M
Belt clip, 10
Making calls, 14
Menus, 2
C
ꢒ‡‘‘ƒ‚ꢀŠŠ‘Ɛꢀǎǒ
Mute, 17
ꢇŠŠꢀ•‡’‡ŒꢂƐꢀǍǓ
ꢇŠŠƒꢀꢉꢅƐꢀǎǐ
N
add entries to phone directory, 29
delete entries, 28
dial entries, 27
Names,
enter into directory, 20
search for, 22
ꢇ†ŒŒƒŠƐꢀǍǓ
P
D
ꢎ•ƒꢀ‚Ž’ƒƐꢀǒ
ꢅƒŠƒ’ƒꢀŠŠꢀ‘“‹‹—ꢀƒŒ’‡ƒ‘Ɛꢀǎǔ
ꢅƒŠƒ’ƒꢀƒ‚‡ŠꢀƒŒ’‡ƒ‘ƐꢀǍǑ
ꢅ‡Š‡ŒꢂƐꢀ
Q
Quick reference guide, 2-3
directory dialing, 23
ꢀ
„‹ꢀꢀꢇꢉꢅꢀƒ‚ƐꢀǎǓ
mode, 11
R
ꢈƒƒ‡”‡ŒꢂꢀŠŠ‘ƐꢀǍǐ
ꢈƒ†ꢂ‡ŒꢂƐꢀǓ
ꢈƒ‚‡ŠƐꢀǍǑ
ꢈ‡Œꢂꢀ‘‡ŠƒŒ‡ŒꢂƐꢀǍǑ
ꢈ‡Œꢂƒꢀ‘“Œ‚ƐꢀǍǎ
ꢈ‡Œꢂƒꢀ”Š“‹ƒƐꢀǍǏ
ꢅ‡ƒ’—ƐꢀǍǔ
dial number, 23
edit entries, 23
make an entry, 23
search, 22
ꢅꢃꢆꢀ„‡Š’ƒƐꢀǒ
S
E
Screen display messages, 31
Search for names, 22
Speakerphone, 14
Elapsed time, 14
F
Flash (switchhook flash), 17
T
Technical specifications, 47
Temporary tone dialing, 17
Troubleshooting, 32
H
Hands-free use, 14
Œ‚‘ƒ’ꢀŠ’ƐꢀǍǒ
Headset, 10
V
Volume control, 17
48
© 2007 Advanced American Telephones. All rights reserved.
AT&T and the AT&T logo are trademarks of AT&T Knowledge Ventures,
Š‡ƒŒ‘ƒ‚ꢀ’ꢀɇ‚”Œƒ‚ꢀɇ‹ƒ‡ŒꢀꢌƒŠƒŽ†Œƒ‘Ɠꢀꢎ‡Œ’ƒ‚ꢀ‡Œꢀꢇ†‡ŒƓꢀꢉ‘‘“ƒꢀǒꢀɇꢌſꢌꢀnjǓƤnjǓƓ
91-001104-040-100
|