Daewoo ET 13P2 User Manual

INSTRUCTION MANUAL  
Color Television  
ET 13P2  
ET 19P2  
EMERSON RADIO  
CORP.  
9 Entin Road  
P.O. Box 430  
Parsippany. NY07054-0430  
1-888-508-2627  
Dear Customer :  
Emerson Radio Corp. would like to thank you for choosing this color television receiver. It  
incorporates a host of features designed to give you excellent performance for many years to  
come.  
We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it deliv-  
ers just as quickly as possible, but we ask you to take a few minutes to read the instructions  
in the booklet to familiarize yourself with the receiver, its functions and some features which  
may be new to you. If you follow the instructions, this unit should give you many years of  
viewing pleasure.  
If for any reason it does not, we want to hear about it. Please write to us at the address  
above. Emerson always welcomes comments and suggestions on this or any of our other prod-  
ucts.  
On the other hand, when you discover the enjoyment, reliability and ease of use that is built  
into it, we hope that you will tell your friends, and consider Emerson when you make your  
next purchase of home entertainment equipment.  
In addition to TV receivers, Emerson Radio Corp. produces a full line of audiovisual products  
built to the same high design, engineering, and manufacturing standards as this unit.  
Here are a few tips that will keep your TV receiver looking great and performing for years to  
come.  
• Avoid putting it in excessively hot locations. Damage to the cabinet or premature compo-  
nent failures can result.  
• There are ventilation holes in the bottom and rear of the cabinet. Make sure that they  
remain unobstructed. Do not place the receiver on top of a thick cloth.  
• If you don’t plan to use the receiver for several days, it’s a good idea to unplug it from the  
power outlet.  
• Many common household cleaning agents, sprays, solvents, and polishes will cause perma-  
nent damage to the surface of the cabinet. The best cleaning agents are mild soap and a  
damp cloth.  
Again, thank you for choosing this Emerson product. We have employed advanced engineering  
techniques in its design, and manufactured it in one of the world’s most up-to-date production  
facilities. The result is a TV receiver that we know you will be as proud to own as we were to  
create.  
Very truly yours,  
Emerson Radio Corp.  
CONTENTS  
Table of Contents  
Important Safeguards  
Chapter 1: Overview of Your Equipment  
2
4
Your TV's Front Panel  
Your TV's Back Panel  
Your Remote Control  
Installing your remote control batteries  
Notes  
4
4
5
6
6
Chapter 2: Connecting an Antenna or Cable to Your TV  
7
Connecting an Antenna  
Connecting a Cable System  
Connecting Other Pieces of Equipment  
Safety Note  
7
8
9
9
Chapter 3: Operating Your TV  
Turning your TV On  
10  
10  
10  
11  
11  
12  
12  
12  
13  
14  
14  
Programming Your TV's Channel Memory  
Changing Channels  
Changing the Volume  
Changing The TV's Channel Memory  
Adding/Deleting a channel to memory  
Displaying the Current Channel  
Adjusting Video Settings  
Returning to the factory settings  
Descriptions of video settings  
Chapter 4: Using Timer Functions  
Setting the Clock  
15  
15  
15  
16  
16  
17  
Setting the Wake-up Timer  
Setting the Off Timer  
Canceling the Wake-up Timer or Off Timer  
Setting the Sleep Timer  
Chapter 5 : Additional Features  
Changing the Language of the On-Screen Menus  
18  
18  
18  
19  
19  
20  
Captioning  
CC on Mute  
Power Restore  
Auto Tint(option)  
Chapter 6 : Troubleshooting  
Warranty  
21  
22  
Table of Contents  
1
S A F E T Y  
IMPORTANT SAFEGUARDS  
PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION  
EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS  
AND INSTRUCTIONS MARKED ON THE TV RECEIVER.  
1
2
3
Read all of these instructions.  
Save these instructions for later use.  
7
Slots and openings in the cabinet and  
the back or bottom are provided for ven-  
tilation and to ensure reliable operation  
of the television equipment; and to pro-  
tect it from overheating, these opening,  
must not be blocked or covered. The  
opening should never be blocked by plac-  
ing the television equipment on a bed,  
sofa, rug, or other similar surface. (This  
equipment should never be placed near  
or over a radiator or heat register.) This  
television equipment should not be  
placed in a built-in installation such as a  
bookcase unless proper ventilation is  
provided.  
Unplug this television equipment from  
the wall outlet before cleaning. Do not  
use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.  
4
5
6
Do not use attachments not recommend-  
ed by the television equipment manufac-  
turer as they may result in the risk of  
fire, electric shock or other personal  
injury.  
Do not use this television equipment  
near water, for example, near a bathtub,  
washbowl, kitchen sink, or laundry tub,  
in a wet basement, or near a swimming  
pool, or the like.  
8
9
This television equipment should be  
operated only from the type of power  
source indicated on the marking label. If  
you are not sure of the type of power  
supplied to your home, consult your tele-  
vision dealer or local power company.  
Do not place this television equipment on  
an unstable cart, stand, or table. The  
television equipment may fall, causing  
serious injury to a child or adult, and  
serious damage to the equipment. Use  
only with a cart or stand recommended  
by the manufacturer, or sold with the  
television equipment. Wall or shelf  
mounting should follow the manufactur-  
er's instructions, and should use a  
mounting kit approved by the manufac-  
turer.  
This television equipment is equipped  
with a polarized alternating current line  
plug (a plug having one blade wider than  
the other). This plug will fit into the  
power outlet only one way. This is a  
safety feature. If you are unable to insert  
the plug fully into the outlet, try revers-  
ing the plug. If the plug should still fail  
to fit, contact your electrician to replace  
your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
6AAn appliance and cart combination  
should be moved with care. Quick stops,  
excessive force, and uneven surfaces may  
cause the appliance and cart combina-  
tion to overturn.  
10 Do not allow anything to rest on the  
power cord. Do not locate this television  
equipment where the cord will be abused  
by persons walking on it.  
11 Follow all warnings and instructions  
marked on the television equipment.  
12 For added protection for this television  
equipment during a lightning storm, or  
when it is left unattended and unused  
for long periods of time, unplug it from  
the wall outlet and disconnect the anten-  
na or cable system. This will prevent  
damage to the equipment due to light-  
ning and power-line surges.  
2
Important Safeguards  
aged.  
13 An outside antenna system should not  
be located in the vicinity of overhead  
power lines or other electric light or  
power circuits, or where it can fall into  
such power lines or circuits. When  
installing an outside antenna system,  
extreme care should be taken to keep  
from touching such power lines or cir-  
cuits as contact with them might be  
fatal.  
(f) When the television equipment  
exhibits a distinct change in perfor-  
mance - this indicates a need for ser-  
vice.  
18 When replacement parts are required, be  
sure the service technician has used  
replacement parts specified by the manu-  
facturer that have the same characteris-  
tics as the original part. Unauthorized  
substitutions may result in fire, electric  
shock or other hazards.  
14 Do not overload wall outlets and exten-  
sion cords as this can result in fire or  
electric shock.  
19 Upon completion of any service or  
repairs to this television equipment, ask  
the service technician to perform safety  
checks to determine that the television is  
in a safe operating condition.  
15 Never push objects of any kind into this  
television equipment through openings  
as they may touch dangerous voltage  
points or short-out parts that could  
result in a fire or electric shock. Never  
spill liquid of any kind on the television  
equipment.  
20 If an outside antenna or cable system is  
connected to the television receiver, be  
sure the antenna or cable system is  
grounded so as to provided some protec-  
tion against voltage surges and built-up  
static charges.  
16 Do not attempt to service this television  
equipment yourself as opening or remov-  
ing covers may expose you to dangerous  
voltage or other hazards. Refer all servic-  
ing to qualified service personnel.  
Section 810 of the National Electrical  
Code, ANSI/NFPA N0.70-1984, provides  
information with respect to proper  
grounding of the mast and supporting  
structure, grounding of the lead-in wire  
to an antenna discharge unit, size of  
grounding conductors, location of anten-  
na-discharge unit, connection to ground-  
ing electrodes, and requirements for the  
grounding electrode.  
17 Unplug this television equipment from  
the wall outlet and refer servicing to  
qualified service personnel under the fol-  
lowing conditions:  
(a) When the power-supply cord or plug  
is damaged or frayed.  
(b) If liquid has been spilled, or objects  
have fallen into the television equip-  
ment.  
(c) If the television equipment has been  
exposed to rain or water.  
(d) If the television equipment does not  
operate normally by following the  
operating instructions. Adjust only  
those controls that are covered by the  
operating instructions as an improper  
adjustment of other controls may  
result in damage and will often  
require extensive work by a qualified  
technician to restore the TV receiver  
to its normal operation.  
(e) If the television equipment has been  
dropped or the cabinet has been dam-  
Important Safeguards  
3
C H A P T E R  
1
Overview of Your Equipment  
Your TV comes with a remote control. The section below summarizes the buttons,  
controls, and terminals that you will use with your TV.  
Your TV's Front Panel  
1 POWER  
Use this button to turn your TV on or off.  
2 CH▲  
Use these buttons to change channels on your TV, or to select items in the menu  
system.  
3 CVOLB  
Use these buttons to change your TV's volume, to activate selections in the menu  
system, or to change audio and video settings.  
4 MENU  
Use this button to turn the TV's menu system on and off.  
5 Remote control receiver  
This receiver receives a signal from your remote control. Do not block it.  
Your TV's Back Panel  
1
Antenna terminal  
Use this terminal to attach an antenna or cable  
system to your TV.  
4
Chapter 1 : Overview of Your Equipment  
Your Remote Control  
1. POWER  
Use this button to turn your TV on or off.  
2. MUTE  
Use to turn the TV’s sound on and off.  
3. CH▲  
POWER  
MUTE  
Use these buttons to change channels on  
your TV, or select items in the menu system.  
2
1
C H  
4. CVOLB  
Use these buttons to change your TV's vol-  
ume, to activate selections in the menu sys-  
tem, or to change audio and video settings.  
3
MENU  
4
5
4
5. MENU  
VOL  
VOL  
Use this button to turn the TV's menu sys-  
tem on and off.  
3
6. DISPLAY  
C H  
Use this button to display the channel  
number and status.  
DISPLAY  
INPUT  
VIDEO  
8
7
6
9
1
2
5
3
7. INPUT  
Use this button to select the TV’s signal source.  
4
6
8. VIDEO  
Use this button to display video adjustment  
items.  
7
8
0
9
9. 0-9  
SLEEP  
PREVIOUS  
11  
10  
Use these buttons to change channels.  
R-38T01  
10. SLEEP  
Use this button to program the TV to turn off  
after a certain time.  
11. PREVIOUS  
Use this button to return to the previous  
channel you were watching.  
Chapter 1 : Overview of Your Equipment  
5
Installing your remote control batteries  
1
2
Open the battery compartment on the back of the remote control.  
Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-”  
terminals are oriented correctly.  
3
Replace the cover.  
Notes  
Do not mix different types of batteries, or mix an old and a new battery.  
Remove and replace weak batteries. Weak batteries can leak and damage your con-  
troller. Dispose of batteries properly; never throw them into a fire.  
Point your remote at the receiver on the center of the front of the TV. Make sure the  
receiver is not blocked.  
The remote control can operate up to 30 feet away from the TV, if you are directly  
facing the front of the TV. Operating distance diminishes as you move to the sides of  
the TV.  
6
Chapter 1 : Overview of Your Equipment  
C H A P T E R  
2
Connecting an Antenna or Cable to Your TV  
Your TV will provide you with the best performance if you connect it to an external  
antenna or cable system. Follow the directions below make this connection. Please  
note that you will normally only have to make one of the connections shown below,  
not all of them.  
All connections will be made to the antenna terminal on the back of your TV. The  
antenna terminal is a silver metal post partially surrounded by two plastic tabs. For  
help in locating the antenna terminal, see “Your TV's Back Panel” on page 4.  
Connecting an Antenna  
If your antenna ends in a single coaxi-  
al lead, simply press or screw the cable onto the  
antenna terminal on the back of your TV.  
If your antenna ends in a pair of 300 ohm twin leads, you must use a  
300-ohm/75-ohm adapter(available at your local electronics store). Place the leads  
underneath the screws on the adapter, tighten the screws, then press the adapter onto  
the antenna terminal on the back of the TV.  
Chapter 2 : Connecting an Antenna or Cable to Your TV  
7
Antennas with two sets of leads  
You might have two sets of leads from your antenna system, especially if you have  
one antenna for VHF signals and one antenna for UHF signals.  
If your antenna system has both a coaxial lead and twin 300-ohm leads  
,
you  
must obtain a combiner (available at your local electronics store). Press or screw the  
coaxial lead onto the combiner; place the twin leads underneath the screws on the  
combiner and tighten the screws. Press the cable from combiner onto the antenna ter-  
minal on the back of your TV.  
If your antenna system has two sets of twin 300-ohm leads, you must  
obtain a combiner (available at your local electronics store). Place one set of twin  
leads underneath the screws on the combiner and tighten the screws. Do the same  
with the other set of twin leads. Press the cable from the combiner onto antenna ter-  
minal on the back of your TV.  
Connecting a cable system  
If your cable set-up is not described below, please contact your cable company for  
more information.  
If your cable system does not  
require the use of a cable box, simply  
press or screw the incoming cable onto the  
antenna terminal on the back your TV.  
8
Chapter 2 : Connecting an Antenna or Cable to Your TV  
If your cable system requires you to use a converter box for all  
channels, connect the incoming cable to the IN terminal on the converter box.  
Connect another cable between the OUT terminal on the converter box and the  
antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4  
and change channels using the converter box.  
If your cable system only requires you to use a converter box for  
some channels (i. e. pay-TV channels), follow these steps: Find the primary  
incoming coaxial cable. Plug this cable into a splitter (available at your local electronics  
store). Connect one coaxial cable between one OUT terminal on the splitter and the IN  
terminal on the converter box. Connect another coaxial cable between the other OUT  
terminal on the splitter and the B-IN terminal on an A/B switch (available at your local  
electronics store.) Connect a third coaxial cable between the OUT terminal on the con-  
verter box and the A-IN terminal on the A/B switch. Finally, connect a coaxial cable  
between the OUT terminal on the A/B switch and the antenna terminal on the back of  
your TV.  
B
A
IN  
OUT  
Converter Box  
When the A/B switch is in the A position, you need to change channels on the con-  
verter box (and your TV should be tuned to channel 3 or 4); when the A/B switch is  
in the B position you can change channels on the TV.  
Connecting Other Pieces of Equipment  
You may want to connect a VCR, laser disc player, satellite receiver, or another type  
of equipment to your TV. We recommend that you follow the instructions included  
with the piece of equipment you wish to connect.  
Safety Note  
If you plan on being away from your home for an extended period of time, or if a  
thunderstorm is approaching, you should unplug your television, and you may wish to  
disconnect your TV from a rooftop or satellite antenna. You do not need to disconnect  
your TV from a cable system.  
Chapter 2 : Connecting an Antenna or Cable to Your TV  
9
C H A P T E R  
3
Operating Your TV  
Once you have connected your TV to an antenna or cable system, plugged the TV in,  
and put batteries in the remote, you are ready to use the TV. The first thing you  
should do is program your TV so it memorizes all of available channels.  
Turning Your TV On  
1
To turn your TV, press the POWER button on the remote con-  
trol. You can also use the POWER button on the front panel.  
Make sure your TV is plugged in before you try to turn it on.  
Programming Your TV's Channel Memory  
Your TV's memory determines the channels that are available using the CH▲  
buttons. If a channel is not in memory, you can tune to it with the number buttons, but  
not with the CHbuttons. Follow these steps to program your TV's memory:  
1
2
With the TV on, press the MENU button twice, then “Set-Up” menu will appear.  
Use the CHbuttons to select “Reception”, then use the CVOLB button to  
select ‘Air’ or ‘Cable’. If you connected an antenna to your TV, select ‘Air’; If you  
connected a cable system, select ‘Cable’.  
3
Use the CHbuttons to select “Memorize Channels”, then use the CVOLB  
button to enter the “Memorize Channels” process. Again press the CVOLB but-  
ton to begin.  
4
5
Press the MENU button to return to Set-Up menu.  
Press the MENU button three times to return to normal TV viewing.  
Your TV's channel memory will not be affected by a power outage. You will not need  
to re-program the memory unless you change the type of cable or antenna connected  
to your TV.  
1
2
3-1  
Set-Up  
Set-Up  
Set-Up  
Language :  
Reception :  
English  
Air  
Language :  
Reception :  
English  
Air  
Language :  
Reception :  
English  
Air  
Memorize Channels  
Add/Delete Channels  
Memorize Channels  
Add/Delete Channels  
Memorize Channels  
Add/Delete Channels  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
5
3-2  
4
Memorize Channels  
Set-Up  
Air 11  
Language :  
Reception :  
Memorize Channels  
Add/Delete Channels  
English  
Air  
Memorizing all air channels.  
Please stand by.  
Press MENU to cancel and  
returu to Set-up menu.  
Select  
Adjust  
Next  
10 Chapter 3: Operating Your TV  
Changing Channels  
You can change channels in three ways:  
1
The CHbuttons will take you through all memorized  
1
channels, one by one. The CHbuttons will not access  
channels that have not been programmed into the TV's  
memory. For more information about programming chan-  
nels into memory, see the section “Programming your TV's  
Channel Memory” on the previous page.  
2
3
2
3
The number buttons (0-9) will take you to any channel,  
even if it has not been memorized. To change to a channel,  
enter its number; the TV will tune to the new channel  
when you enter the second digit of the channel.  
The PREVIOUS button will take you instantly to the last  
channel you were watching.  
Changing the Volume  
1
To change the volume of the TV set, use the CVOLB  
buttons on the remote or on the front panel.  
1
2
To quickly turn off the sound, press the MUTE button on  
the remote. The ‘MUTE’ will appear on screen, colored  
green. To return the volume to its previous level, press  
MUTE again.  
2
Chapter 3: Operating Your TV 11  
Changing the TV's Channel Memory  
Your TV's memory determines the channels that are available using the CHbut-  
tons. You can add channels to this memory or remove them from memory. If a chan-  
nel is removed from memory, you can tune to it with the number buttons, but you  
cannot tune to it with the CHbuttons.  
If there are just one channel memorized, then the Add/Delete Channels function will  
search the whole channels. But if there are two or more channel memorized, then the  
Add/Delete Channels function will search the memorized channels only.  
Adding/Deleting a channel to memory  
1
2
3
Use the number buttons to tune to the channel.  
Press the MENU button twice, then “Set-Up” menu will display.  
Use the CHbuttons to select “Add/Delete Channels”, then use the CVOLB  
button to enter the “Add/Delete Channels” process.  
4
5
6
If the channel is not in memory, then use the CVOLB button to add the channel  
from memory.  
If the channel is in memory, then use the CVOLB button to delete the channel  
from memory.  
If you are going to delete other channel, then press the CHbuttons until  
desired channel is selected. And press the CVOLB button to delete the channel.  
7
Wait 10 seconds, or press the MENU button four times to exit.  
3
1
2
Set-Up  
Set-Up  
11  
Language :  
Reception :  
English  
Air  
Language :  
Reception :  
English  
Air  
Memorize Channels  
Add/Delete Channels  
Memorize Channels  
Add/Delete Channels  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
4
5
6
Add/Delete Channels  
Add/Delete Channels  
Add/Delete Channels  
Air 11  
This channel is not in memory.  
Press VOL to add.  
Air 11  
This channel is in memory.  
Press VOL to delete.  
Air 11  
This channel is in memory.  
Press VOL to delete.  
Press CH for other channels.  
Press CH for other channels.  
Press CH for other channels.  
Press MENU to return  
to Set-up menu.  
Press MENU to return  
to Set-up menu.  
Press MENU to return  
to Set-up menu.  
Displaying the Current Channel  
1
To quickly see the current channel number and status, press DISPLAY  
button on the remote control.  
The current channel number and status will be displayed.  
12 Chapter 3: Operating Your TV  
Adjusting Video Settings  
You may wish to adjust the video settings (e. g. contrast or color) to obtain the most  
pleasing picture. To do so, follow these directions:  
1
2
With the TV on, press the MENU button. then “Video” menu will appear.  
The “Settings” item will be selected. Use the CVOLB buttons to turn Settings to  
Preset or Custom.  
3
Use the CHbuttons to select the video setting you wish to adjust.  
Descriptions of the video settings are on the next page.  
4
5
6
Use the CVOLB buttons to adjust the video setting to the level you prefer.  
Use the CHbuttons to select another video setting to adjust.  
When you are finished, press the MENU button until menu OSD will be disap-  
peared.  
1
2
3
Video  
Video  
Video  
Settings :  
Custom  
Settings :  
Preset  
Settings :  
Preset  
Contrast :  
Brightness  
Sharpness  
Color  
Contrast :  
Brightness  
Sharpness  
Color  
Contrast :  
Brightness  
Sharpness  
Color  
Tint  
Tint  
Tint  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
4
5
6
Contrast  
Brightness  
Chapter 3: Operating Your TV 13  
Returning to the factory settings  
If you would like to return to the original video settings, as they were calibrated at the  
factory, follow these steps :  
1
2
With the TV on, press the MENU button. then “Video” menu will appear.  
Press the CVOLB buttons to set the “Settings” to ‘Preset’.  
The TV will remember the ‘Custom’ settings you had previously chosen. When you  
set “Settings” to ‘Custom’ again, your previous custom settings will be restored.  
1
2
Video  
Video  
Settings :  
Custom  
Settings :  
Preset  
Contrast :  
Brightness  
Sharpness  
Color  
Contrast :  
Brightness  
Sharpness  
Color  
Tint  
Tint  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Descriptions of video settings  
The contrast setting controls the relation between the light and black areas of the  
screen. If the light areas are too bright and are losing details, press the VOL but-  
ton; if the picture is gray and lacks contrast, press the VOL button.  
C
B
The brightness settings controls the overall amount of light in the picture. If the pic-  
ture is too bright, press the VOL button; if the picture is too dark, press the VOL  
button.  
C
B
Sharpness controls how the TV displays edges of objects on-screen. If the TV shows  
multiple vertical lines at the edges of an object, press the VOL button; if the verti-  
cal edges of on-screen objects are fuzzy, press the VOL button.  
C
B
The color setting controls the intensity of color. If the color is over-saturated, press the  
VOL button; if the color is washed out, press the VOL button.  
B
B
The tint setting controls the relationship of red and green in a picture. Tint is espe-  
cially noticeable in flesh tones. If flesh tones seem too red or purple, press the VOL  
B
button; if flesh tones are too green, press the VOL  
B
button.  
14 Chapter 3: Operating Your TV  
C H A P T E R  
4
Using Timer Functions  
Your TV has a built in-clock, and you can set the TV to turn on and off at times that  
you select. You can also set your TV to turn off after counting down a certain amount  
of time.  
Setting the Clock  
1
With the TV turned on, press the MENU button until “Time” menu will be dis-  
played.  
2
The “Set Clock” item will be selected. Press the CVOLB buttons to set the clock.  
If you hold down either  
C
VOL or VOL  
B
button, the corresponding numbers will  
change more quickly.  
3
When the clock is set correctly, use the CHbuttons to select another “Time”  
function, or press the MENU button until menu OSD will be disappeared.  
1
2
3
Time  
Time  
Time  
Set Clock :  
:
Set Clock :  
12 : 00 AM  
Set Clock :  
12 : 00 AM  
Wake-up time :  
Off time :  
:
:
Wake-up time :  
Off time :  
:
:
Wake-up time :  
Off time :  
:
:
Sleep timer :  
0 min  
Sleep timer :  
0 min  
Sleep timer :  
0 min  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Settings the Wake-up timer  
If you enter a time in the “Wake-up time” setting, your TV will automatically turn on  
at that time. Follow these instructions to set the “Wake-up time”.  
After Wake-up Timer turned on the TV set, if user do not input the user  
control (e.g. remote CH or VOL key) within 15 minutes, the TV set will  
turn off automatically. If user input the user control within 15 minutes,  
the TV set will turn on continuously.  
It is safety feature for prevent from any kind of problem without human  
control.  
1
With the TV turned on, press the MENU button until “Time” menu will be dis-  
played.  
2
3
Use the CHbuttons to select “Wake-up time” item.  
If you hold down either  
change more quickly.  
C
VOL or VOL  
B
button, the corresponding numbers will  
4
When the setting is correct, use the CHbuttons to select another “Time” func-  
tion, or press the MENU button until menu OSD will be disappeared.  
1
2
3
Time  
Time  
Time  
Set Clock :  
Wake-up time :  
Off time :  
12 : 00 AM  
:
:
Set Clock :  
Wake-up time :  
Off time :  
12 : 00 AM  
:
:
Set Clock :  
Wake-up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
:
Sleep timer :  
0 min  
Sleep timer :  
0 min  
Sleep timer :  
0 min  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Chapter 4: Using Timer Functions 15  
Setting the Off Timer  
If you enter a time in the “Off time” setting, your TV will automatically turn off at  
that time. Follow these instructions to set the “Off time”.  
1
With the TV turned on, press the MENU button until “Time” menu will be dis-  
played.  
2
3
Use the CHbuttons to select “Off time” item.  
If you hold down either  
change more quickly.  
C
VOL or VOL  
B
button, the corresponding numbers will  
4
When the setting is correct, use the CHbuttons to select another “Time” func-  
tion, or press the MENU button until menu OSD will be disappeared.  
1
2
3
Time  
Time  
Time  
Set Clock :  
Wake-up time :  
Off time :  
12 : 00 AM  
06 : 30 AM  
:
Set Clock :  
Wake-up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
:
Set Clock :  
Wake-up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
0 min  
Sleep timer :  
0 min  
Sleep timer :  
0 min  
Sleep timer :  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Canceling the Wake-up Timer or Off Timer  
If you would like to cancel the Wake-up Timer or the Off Timer, Press the  
buttons until the timer settings return to “- -:- -”.  
CVOLB  
The Wake-up Timer and Off Timer will not function correctly unless the clock has  
been set.  
16 Chapter 4: Using Timer Functions  
Setting the Sleep Timer  
The sleep timer allows you to set an amount of time from 15 minutes to 120 minutes.  
TV will count down the amount of time you set, then turn itself off.  
To set the sleep timer:  
1
With the TV turned on, press the MENU button until “Time” menu will be dis-  
played.  
2
3
Use the CHbuttons to select “Sleep timer” item.  
Use the  
C
VOL  
B
buttons to set the sleep time. Each time you press VOL, you step  
between the available sleep times : 15min, 30min, 45min, 60min, 90min, or  
120min.  
4
5
When the setting is correct, use the CHbuttons to select another “Time” func-  
tion, or press the MENU button until menu OSD will be disappeared.  
You can also set the “Sleep Timer” during normal TV viewing, simply by pressing  
the SLEEP button on the remote control. This button steps through the available  
sleep times(see step 3), one by one.  
To cancel the Sleep timer, turn the TV off, or set the sleep time to “0” using one of  
the methods described above.  
1
2
3
Time  
Time  
Time  
Set Clock :  
Wake-up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
0 min  
Set Clock :  
Wake-up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
0 min  
Set Clock :  
Wake-up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
60 min  
Sleep timer :  
Sleep timer :  
Sleep timer :  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Chapter 4: Using Timer Functions 17  
C H A P T E R  
5
Additional Features  
This section contains descriptions of the more advanced features of your TV.  
Changing the Language of the On-screen Menus  
You can choose to display the on-screen menus in English, Spanish, French.  
To change the on-screen language:  
1
2
With the TV on, press the MENU button twice, then “Set-Up” menu will appear.  
The “Language” item will be selected. Press the VOL buttons to select the lan-  
C
B
guage you want to use: English, Spanish, French.  
3
To return normal TV viewing, press the MENU button until menu OSD will be  
disappeared.  
1
2-1  
Config  
2-2  
Installer  
Set-Up  
Language :  
Reception :  
English  
Air  
Idioma :  
Recepcion :  
Español  
Aire  
Langue :  
Reception :  
Francais  
Air  
Memorize Channels  
Add/Delete Channels  
Memorizar canales  
Añadir/Borrar canales  
Memoriser Chaines  
Ajouter/Supprimer Chaines  
Select  
Adjust  
Next  
Escoger  
Ajustar  
Otro  
Choix  
Regler  
Suivant  
Captioning  
Many TV shows contains “closed captions”. These captions are hidden words that can  
be displayed on your TV screen. There are two types of these words : “captions” usu-  
ally follow the action on-screen, providing a written version of the dialogue, narra-  
tion, and sound effects ; “text” is not usually related to the action on-screen, often  
providing information such as news or weather. A TV program might be providing  
more than one set of captions or one set of text.  
To set your TV to display captions or text.  
1
With the TV turned on, press the MENU button until “Special” menu will be dis-  
played.  
2
The “Closed Caption” item be selected. To turn captioning on, use the  
buttons to select Captions (C1 or C2) or Text (T1 or T2).  
CVOLB  
At the time these instructions were written, only C1 is normally available, but feel  
free to try the other selections.  
3
Wait 10 seconds, or press the MENU button to return to normal TV viewing.  
Your setting will remain intact until you change it.  
1
2-1  
Special  
2-2  
Special  
Special  
Closed Caption : OFF  
Closed Caption : C 1  
Closed Caption : T 1  
CC on Mute : OFF  
Power Restore : OFF  
Auto Tint : OFF  
CC on Mute : OFF  
Power Restore : OFF  
Auto Tint : OFF  
CC on Mute : OFF  
Power Restore : OFF  
Auto Tint : OFF  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
18 Chapter 5 : Additional Features  
CC on Mute  
When the sound is muted, user can select the caption display. It will display the cap-  
tion content instead of sound mute.  
1
With the TV turned on, press the MENU button until “Special” menu will be dis-  
played.  
2
3
Use the CHbuttons to select “CC on Mute” item.  
Use the  
C
VOL  
B
buttons to select “C1” or “C2”.  
1
2
3-1  
Special  
Special  
Special  
Closed Caption : C 1  
CC on Mute : OFF  
Power Restore : OFF  
Auto Tint : OFF  
Closed Caption : C 1  
CC on Mute : OFF  
Power Restore : OFF  
Auto Tint : OFF  
Closed Caption : C 1  
CC on Mute : C 1  
Power Restore : OFF  
Auto Tint : OFF  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
3-2  
Special  
Closed Caption : C 1  
CC on Mute : C2  
Power Restore : OFF  
Auto Tint : OFF  
Select  
Adjust  
Exit  
Power Restore  
User can select the On/Off status when the power cord put into the wall outlet. If  
user have a cable box with AC outlet, then user can connect the TV power cord to the  
AC outlet and control the TV without TV remote control. This function is rarely used  
for home use, so special care is needed while using.  
1
With the TV turned on, press the MENU button until ‘Special” menu will be dis-  
played.  
2
3
Use the CHbuttons select ‘Power Restore” item.  
Use the  
C
VOL  
B
buttons to select “On” or “Off”.  
1
2
3
Special  
Special  
Special  
Closed Caption : C 1  
CC on Mute : C 1  
Power Restore : OFF  
Auto Tint : OFF  
Closed Caption : C 1  
OC on Mute : C 1  
Power Restore : OFF  
Auto Tint : OFF  
Closed Caption : C 1  
OC on Mute : OFF  
Power Restore : On  
Auto Tint : OFF  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
Chapter 5 : Additional Features 19  
Auto Tint(option)  
This is function for fresh tone compensation.  
1
With the TV turned on, press the MENU button until “Special” menu will be dis-  
played.  
2
3
Use the CHbuttons to select “Auto Tint” item.  
Use the  
C
VOL  
B
buttons to select “On” or “Off”.  
1
2
3
Special  
Special  
Special  
Closed Caption : C 1  
CC on Mute : C 1  
Power Restore : On  
Auto Tint : OFF  
Closed Caption : C 1  
OC on Mute : C 1  
Power Restore : On  
Auto Tint : OFF  
Closed Caption : C 1  
OC on Mute : C 1  
Power Restore : On  
Auto Tint : On  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
Select  
Adjust  
Exit  
20 Chapter 5 : Additional Features  
C H A P T E R  
6
Troubleshooting  
Your Emerson television is designed to give you trouble-free performance for many  
years. If you have a problem with your TV, try the solutions listed below.  
If the suggestions listed below do not solve your problem, contact your Emerson Radio  
Corp. dealer or an authorized Emerson service center. You can also call Emerson  
directly at 1-888-508-2627.  
There is no picture or sound, or the TV won't turn on.  
¥ Make sure the TV is plugged in.  
¥ Make sure the MUTE is not set.  
¥ Make sure the power is on.  
¥ If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in  
and try again.  
There is no picture or sound on some UHF channels.  
¥ Try another station. If the other stations are OK, it may be a station problem.  
¥ Check that the antenna is connected, is in good working order, has no broken wires,  
and is adjusted correctly.  
¥ See if anything is interfering with the antenna signal.  
¥ Make sure the AIR/CABLE setting is correct.  
The sound is OK, but the picture is poor.  
¥ Try another station. If the other stations are OK, it may be a station problem.  
¥ Check that the antenna is connected and is in good working order, has no broken  
wires, and is adjusted correctly.  
The picture is OK, but the sound is poor.  
¥ Try another station. If the other stations are OK, it may be a station problem.  
¥ Check that the antenna is connected, is in good working order, has no broken wires,  
and adjusted correctly.  
There is poor reception on some channels.  
¥ Try another station. If the other stations are OK, it may be a station problem.  
¥ Check that the antenna is connected, is in good working order, has no broken wires,  
and is adjusted correctly.  
You cannot tune to a cable channel.  
¥ Make sure the AIR/CABLE setting is correct.  
¥ The channel may not be programmed into memory.  
The picture rolls, slants, shows lines, is grainy, has poor color, or has  
ghosts.  
¥ Try another station. If the other station are OK, it may be a station problem.  
¥ Check that the antenna is connected, is in good working order, has no broken wires,  
and is adjusted correctly.  
¥ See of anything is interfering with the antenna signal.  
The remote control does not work.  
¥ Make sure the TV is plugged in.  
¥ Make sure there are fresh batteries in the remote control.  
¥ Make sure there is nothing blocking the remote control signal.  
21  
Chapter 6 : Troubleshooting  
WARRANTY  
Warranty  
Emerson Radio Corp. warrants each new electronic product manufactured by it  
to be free from defective material and workmanship and agrees to remedy any such  
defect or to furnish a new part (at the Companys option) in exchange for any part of  
any unit of its manufacture which under normal installation, use, and service dis-  
closed such defect, provided the unit is delivered by the owner to us or to our autho-  
rized distributor from whom purchased or authorized service station, intact, for our  
examination with all transportation charges prepaid to our factory. To establish and  
receive warranty service at our factory or authorized service facilities, proof of pur-  
chase/dated sales invoice is required  
Return authorization must be obtained before any merchandise is returned to the fac-  
tory.  
This warranty does not extend to any of our electronic products which have been sub-  
jected to misuse, neglect, accident, incorrect wiring not our own, improper installation,  
unauthorized modification, or to use in violation of instructions furnished by us, nor  
units which have been repaired or altered outside of our factory, nor to cases where  
the serial number thereof has been removed, defaced, or changed.  
This warranty is in lieu of all warranties expressed or implied and no representative  
or person is authorized to assume for us any other liability in connection with the  
sake of our electronic products.  
Over-the-counter exchange for units that are initially defective  
Initially defectiveis described as when the dealer opens the unit and finds that it is  
inoperative or a customer opens a new unit and finds that it is inoperable. This unit  
may be returned to the factory by the dealer for exchange. Under no circumstances  
will the customer be permitted to return the defective unit directly to the factory.  
Exchange must be directly with the dealer.  
Model  
ET-13P2  
ET-19P2  
Parts  
90 days  
90 days  
Labor Picture Tube  
90 days  
90 days  
2 years  
2 years  
22 Warranty  
This instrument is listed by Underwriters  
Laboratories, Inc. It is designed and  
manufactured to meet rigid U.L. safety  
standards against X-radiation, fire, casualty  
and electrical hazards.  
EMERSON RADIO CORP.  
9 Entin Road  
P.O. Box 430  
Parsippany. NY07054-0430  
1-888-508-2627  
For more information about this or other Emerson products, please call 1-888-508-2627.  

HP Hewlett Packard Compaq Advantage LA2006x 20 LED LCD Monitor XN374AA#ABA User Manual
GE JP660 User Manual
Cypress CY8C22213 User Manual
Cypress CY7C68320C User Manual
Coleman 9927 User Manual
Cannon 50cm Free Standing Gas Cooker C50LCIK User Manual
Blodgett RE Series User Manual
Avanti TD 25 User Manual
Asus Computer Monitor VW227 User Manual
AMD K3780E User Manual