1692 IP Conference Phone
Release 1.0
User’s Guide
1725-15649-001 Rev. A
16-603398
Issue 1
Nov 2009
1692 IP Conference Phone User’s Guide
Nov 2009
3
Contents
4
1692 IP Conference Phone User’s Guide
Nov 2009
About This Guide
Overview
This guide describes how to use your 1692 IP Conference Phone. The phone is simple to use
while offering the latest advances in telephony systems. Internet Protocol (IP) phones obtain
their operational characteristics from your central phone server rather than residing in the phone
unit itself. Updates and new features are downloaded to your phone without intervention or the
need for phone replacement.
This guide contains four chapters, geared to how you actually use the phone. It covers the keys
and features on the phone, making, receiving and handling calls, and how to troubleshoot the
phone if it is not operating properly.
Intended Audience
This document is intended for IP conference phone users who use a 1692 IP Conference
Phone in the conference room. It is not intended to be a technical reference guide for
System Administrators or phone technicians.
Issue Date
This is the first issue of this user guide, which supports software release 1.0.
How to Use This Document
This guide is organized to help you find topics in a logical manner. Read it from start to finish to
get a thorough understanding of how to use your phone, or review the Table of Contents to
locate information specific to a task or function you want to perform.
1692 IP Conference Phone User’s Guide
Nov 2009
5
About This Guide
Document Organization
This guide contains the following chapters:
Describes each key and feature on the phone
console.
Describes all call-related information, such as
initiating calls, conferencing, and transferring
calls.
options.
Describes how to test your phone’s basic
operation and provides basic troubleshooting
actions if you experience problems.
Conventions Used
This guide uses the following textual, symbolic, and typographic conventions to help you
interpret information.
Typographic Conventions
This guide uses the following typographic conventions:
Document
Blue underlined type indicates a section or sub-section in this
document containing additional information about a topic.
“Document”
Italic type enclosed in quotes indicates a reference to an
external document or a specific chapter/section of an external
document.
italics
Italic type indicates the result of an action you take or a system
response in step by step procedures.
Conference
In step by step procedures, words shown in bold represent a
single phone key that should be pressed/selected.
6
1692 IP Conference Phone User’s Guide
Nov 2009
Related Documents
Related Documents
This guide and other related documentation is available online at the following URL:
For information related to installing an IP Telephone, see the “Avaya one-X Deskphone Value
Edition 1600 Series IP Telephones Installation and Maintenance Guide” (Document Number
16-601438).
For information related to maintaining an IP Telephone System on a Local Area Network, see
the “Avaya one-X Deskphone Value Edition 1600 Series IP Telephones Administrator Guide”
(Document Number 16-601443).
Standard telephone features are described in Chapter 21, “Telephony” in the “Overview for
Avaya Communication Manager” (Document Number 03-300468).
1692 IP Conference Phone User’s Guide
Nov 2009
7
About This Guide
8
1692 IP Conference Phone User’s Guide
Nov 2009
Chapter 1: Introducing Your Avaya 1692 IP
Conference Phone
Introduction
This chapter introduces you to the layout of the 1692 IP Conference Phone. It provides a
description of each key and other phone characteristics.
The Avaya 1692 IP Conference Phone
The phone has an LCD, a speaker, three sensitive microphones, and a minimum of three call
appearances. Depending on how your system administrator configures the phone, the phone
may support up to ten call appearances.
1692 IP Conference Phone User’s Guide
Nov 2009
9
Chapter 1: Introducing Your Avaya 1692 IP Conference Phone
Figure 1: Phone Components
Component
Description
1
2
Select Key
Select a highlighted item from a menu or list.
Up/Down
Scroll Keys
Access call appearances or scroll through displayed menus or lists.
3
Up/Down Volume Adjust the speaker or alert volume.
Keys
4
5
6
7
8
Mute Key
Turn muting on or off.
Dialing Keypad
Redial Key
Call Key
Enter numbers or characters.
Automatically redial the last dialed number.
Obtain a dial tone, answer an incoming call, or hang up a call.
Select the context-dependent functions displayed on the LCD.
Soft Keys
10 1692 IP Conference Phone User’s Guide
Nov 2009
The Avaya 1692 IP Conference Phone
Component
Description
9
Exit Key
Return to the normal display from a menu or a list.
10 Menu Key
Access ringer and contrast settings, system information, or allows
you to log off.
11
Graphic LCD
Display
View information about your call and your phone.
12 LED Indicators
Detect call status, including:
● Green—Dial tone available/call in progress
● Blinking green—Incoming call/ringing
● Red—Mute
● Blinking red—On hold
The LCD has five lines of approximately 30 characters each. The exact number varies because
of the variable-width font. The phone displays its extension number, as well as the time and date
in the top line. While idle, the phone displays a server-customizable message in the remaining
space.
During phone usage, the bottom line displays soft key labels. The middle three lines display the
call appearances, with the name and phone number of the caller.
Depending on the current state of the call, the following icons display.
Icon
Description
(No icon)
The call appearance is not in use.
Active. Indicates the line is in use.
Ringing. Indicates an incoming call is arriving on this line.
(Soft) Hold. Indicates this line’s call was put on hold pending a conference or
transfer.
On Hold. Indicates a call is on hold on this line.
Hookswitch state. Indicates whether the phone is on-hook or off-hook.
1692 IP Conference Phone User’s Guide
Nov 2009 11
Chapter 1: Introducing Your Avaya 1692 IP Conference Phone
Extension Microphones
The phone provides complete coverage for a 20 foot (6.1 meters) by 20 foot (6.1 meters)
conference room. For larger conference rooms, you can add two extension microphones. The
additional microphones provide coverage for conference rooms up to 20 feet (6.1 meters) by 30
feet (9.1 meters).
Each extension microphone has a mute key and indicator which affects the mute status of the
entire phone and both extension microphones.
For best performance, place the extension microphones at least three feet away from the
phone. The microphone grille must face away from the main unit.
12 1692 IP Conference Phone User’s Guide
Nov 2009
Chapter 2: Using Your Avaya 1692 IP
Conference Phone
Introduction
This chapter shows you how to make and receive calls, and how to use the 1692 IP Conference
Phone’s call handling features.
General Notes on Use of the 1692 IP Conference Phone
The 1692 IP Conference Phone is a conference room phone, not an enterprise desk phone.
Therefore, you do not have access to certain personalization features, such as speed dial lists
or voice mail.
Place the phone in the middle of a room, so that the display and microphones are unobstructed.
Because the microphones are very sensitive, do not cover the phone, block microphones, or
shuffle papers near the phone. Do not raise your voice excessively when speaking. The phone
provides coverage of a conference room up to approximately 20 feet (6.1 meters) by 20 feet
(6.1 meters). The phone with extension microphones provides coverage of a conference room
up to approximately 20 feet (6.1 meters) by 30 feet (9.1 meters).
If the phone or extension microphones are moved during a call, audio quality might be
adversely affected during the move.
Making Calls
To place a new call:
1. Press the Call key and listen for a dial tone.
The status LEDs turn green.
2. Enter the number of the party you want to call.
To redial the last number called:
●
Press the Redial key.
The last number dialed is automatically redialed.
1692 IP Conference Phone User’s Guide
Nov 2009 13
Chapter 2: Using Your Avaya 1692 IP Conference Phone
Receiving Calls
Your call status LEDs blink green as the incoming call rings.
To receive a call:
●
Press the Call key.
The call is listed with any other ongoing calls that might be displayed.
Ending Calls
To end a call, do one of the following:
●
To terminate a call, press the Call key.
The status LEDs turn off.
●
To terminate a call and obtain a dial tone to start a new call, press the Drop soft key.
Call Handling Features
The features described in this section are available while calls are in progress.
Setting Up Conferences
To set up a conference:
1. During a call, press the Conf soft key (you might need to press the More soft key first, if
Conf is not visible).
The call is placed on hold, and you receive a dial tone.
2. Dial the number of the third party in the conference.
3. Once the call is established, press the Conf soft key again to join the third party.
A conference is established.
Note:
Note:
You can automatically set up a conference without completing step 3. After you
complete step 1, press the Conf soft key. Then, complete step 2. When the third
party answers the phone, a conference is automatically created.
14 1692 IP Conference Phone User’s Guide
Nov 2009
Call Handling Features
Holding Calls
To hold a call:
●
During a call, press the Hold soft key (you might need to press the More soft key first, if
Hold is not visible).
The status LEDs blink red to indicate that the call is on hold.
To resume the held call, select the call appearance using the Up/Down Scroll keys, and
then press the Select key.
Muting Calls
To mute a call:
●
During a call, press the Mute key.
The status LEDs turn solid red to indicate that the call is muted. You can still hear the other
person, but they cannot hear you.
To turn off Mute, press the Mute key again.
Transferring Calls
To transfer a call:
1. During a call, press the Transfer soft key (you might have to press the More soft key first,
if Transfer is not visible).
The call is placed on hold.
2. Dial the number to which you want to transfer the call.
3. When you hear ringing, press the Transfer soft key again.
(To cancel the transfer, use the Up/Down Scroll keys to select the call to be transferred,
and then press the Select key.)
Note:
Note:
You can automatically transfer a call without completing step 3. After you
complete step 1, press the Transfer soft key. Then, complete step 2. The call
automatically transfers to the number you specified.
1692 IP Conference Phone User’s Guide
Nov 2009 15
Chapter 2: Using Your Avaya 1692 IP Conference Phone
Dropping Calls
To drop a call:
●
During a call, press the Drop soft key (you might have to press the More soft key first, if
Drop is not visible).
The current call is terminated. You receive a dial tone so you can start another call.
Note:
Note:
While on a locally initiated conference call, the Drop soft key disconnects the last
person added to the call.
Selecting Call Appearances
The phone supports a minimum of three call appearances, with one line of display reserved for
each call appearance. Depending on how your system administrator configures the phone, the
phone may support up to ten call appearances.
To select a call appearance, use the Up/Down Scroll keys to highlight the call appearance you
want, and then press the Select key.
Select a call appearance to do the following:
●
●
●
Answer a call when there is an existing active call.
Retrieve a call from hold.
Initiate a call from a specific call appearance.
From the idle display, you can select the first call appearance by pressing the Call key.
Changing the Volume
To adjust ringer volume:
●
While the phone is idle, press the Up/Down Volume keys until the desired volume is
reached.
To adjust speaker volume:
During a call, press the Up/Down Volume keys until the desired volume is reached.
●
16 1692 IP Conference Phone User’s Guide
Nov 2009
Server Administered Features
Server Administered Features
Other features, such as “Do Not Disturb” and call forwarding, are provided by the server.
These features, if available, are listed when you press the Select key from the idle display or
during a call.
To activate or deactivate the features, use the Up/Down Scroll keys to highlight the option, and
then press the Select key to select it.
Note:
Note:
The features available to you depend on how your system administrator
configures the server.
1692 IP Conference Phone User’s Guide
Nov 2009 17
Chapter 2: Using Your Avaya 1692 IP Conference Phone
18 1692 IP Conference Phone User’s Guide
Nov 2009
Chapter 3: Avaya 1692 IP Conference
Phone Options
Introduction
This chapter describes how to use the main menu to set phone options, such as ring tone and
display contrast, and view phone information.
Accessing the Main Menu
To access the main menu, press the Menu key.
From the main menu, the following options display:
●
●
●
Personal Ringing—allows you to select one of five ring tones for your phone.
Contrast Control—allows you to adjust the phone’s display area contrast level.
System Information—displays phone and network settings.
Note:
Note:
From the main menu, you can also log off the phone. Before you log off the
phone, or for more information about logging off, see your system administrator.
Use the Up/Down Scroll keys and the Select key to highlight and select the menu item you
want.
Updating the Ring Tone
Your phone has five ring tones. You can preview each tone and select the one you prefer.
To update your phone’s ring tone:
1. Press the Menu key.
2. To select the Personal Ringing option, press the Select key.
1692 IP Conference Phone User’s Guide
Nov2009 19
Chapter 3: Avaya 1692 IP Conference Phone Options
3. Use the Up/Down Scroll keys to select a ring pattern, and then press the Select key or the
Save soft key.
To listen to a ring pattern, press the Listen soft key.
4. To exit and save your selection, press the Exit soft key.
5. To return to the idle screen, press the Exit key.
Setting the Display Contrast
Your phone’s display contrast has 30 levels. The default contrast level is 12.
To update the contrast level:
1. Press the Menu key.
2. Use the Up/Down Scroll keys to select Contrast Control, and then press the Select key.
3. To brighten the contrast, press the Up Scroll key. To dim the contrast, press the
Down Scroll key.
4. To save your selection, press the Save soft key.
(To exit the contrast control without saving any changes, press the Cancel soft key.)
5. To return to the idle screen, press the Exit key.
Accessing System Information
A list of phone and network information is available. You usually do not need to view this
information. However, your system administrator might ask you to report certain values from this
screen if a problem occurs.
Note:
Note:
You can view system information, but you cannot change it.
To view system information:
1. Press the Menu key.
2. Use the Up/Down Scroll keys to select System Information, and then press the
Select key.
3. Use the Up/Down Scroll keys to scroll through the list of settings.
20 1692 IP Conference Phone User’s Guide
Nov2009
Accessing System Information
Note:
Up and down arrow symbols display on the screen next to the Up/Down Scroll
Note:
keys. Arrow symbols only display when there are more items to view above or
below the current display.
4. To return to the idle screen, press the Exit key.
1692 IP Conference Phone User’s Guide
Nov2009 21
Chapter 3: Avaya 1692 IP Conference Phone Options
22 1692 IP Conference Phone User’s Guide
Nov2009
Chapter 4: Managing and Troubleshooting
Your Avaya 1692 IP Conference
Phone
Introduction
The 1692 IP Conference Phone is relatively trouble free. This chapter provides helpful
information for:
●
●
●
Interpreting the different ringer tones you hear.
Basic troubleshooting, including common problems and suggested resolutions.
Resetting or power-cycling your phone, when basic troubleshooting does not resolve a
problem.
For all other 1692 IP Conference Phone questions or problems, contact your system
administrator.
Interpreting Ringer Tones
As you become more familiar with the phone, tones you hear in response to incoming calls
become more easily recognized. The following table provides an overview of the tones. Check
with your system administrator to verify that the descriptions are accurate for your system.
Ringing Tones accompany an incoming call. Feedback Tones are those that you hear through
the speaker.
Tones
Meaning
Ringing Continuously
--------
Incoming call.
Half Ring (ring-ping) ---
A call is being redirected from your phone to another because
Send All Calls or Call Forwarding All Calls is active.
Busy --- --- ---
Low-pitched, rapid tone (repeated 60 times per minute),
signifying the number dialed is in use.
1692 IP Conference Phone User’s Guide
Nov 2009 23
Chapter 4: Managing and Troubleshooting Your Avaya 1692 IP Conference Phone
Tones
Meaning
Call Waiting Ringback Tone A ringback tone with lower-pitched signal at the end. This tone
---_
indicates the extension called is busy and the called party was
given a call waiting tone.
Dial ---------
Continuous tone indicating dialing can start.
Intercept/Time-out -_-_-_-
Alternating high and low tone. This tone indicates either a
dialing error, denial of a requested service, or failure to dial
within a preset interval (usually 10 seconds) after lifting the
handset or dialing the previous digit.
Recall Dial - - - -----------
Reorder -- -- -- -- -- --
Ringback ---- ---- ---- ----
Three short tone bursts followed by a steady dial tone to
indicate a feature request was accepted and dialing can start.
Fast, busy tone repeated each half-second to indicate all phone
trunk lines are busy.
Low-pitched tone repeated 15 times a minute to indicate the
number dialed is ringing.
Basic Troubleshooting Chart
Problem/Symptom
Suggested Solution
Phone does not activate
after connecting it the first
time
Unless your system administrator has initialized your phone, you
might experience a delay of several minutes before your phone
becomes operational. Upon plug-in, your phone immediately
starts downloading its operational software, its IP address, and
any special features programmed by your system administrator.
Report any delay of more than ten minutes to your system
administrator.
Phone does not activate
after upgrading it
Report any delay of more than 20 minutes to your system
administrator.
Phone does not activate
after a power interruption
Allow a few minutes for reinitialization after unplugging, turning
off the phone, server problems, or other power interruption
causes.
Phone worked earlier but
does not currently appear
to work
Contact your system administrator.
Display shows an error/
informational message
Most messages involve server/phone interaction. If you cannot
resolve the problem based on the message received, contact
your system administrator.
24 1692 IP Conference Phone User’s Guide
Nov 2009
Resetting and Power Cycling the 1692 IP Conference Phone
Problem/Symptom
Suggested Solution
Characters do not appear
on the Display screen
● Check all lines into the phone to ensure that it is properly
connected.
● Check the power source to ensure that your phone is
receiving power.
If these suggested solutions do not resolve the problem, reset or
power cycle the phone with your system administrator’s
assistance.
Audio quality is poor.
Various network problems might be causing the problem.
Contact your LAN Administrator with as complete a description
of the problem as possible.
Specifically, you hear an
echo, static, sudden
silences (gaps in speech),
clipped or garbled speech.
No dial tone
Ensure that the cords into the phone are securely connected.
Note that there might be a slight operational delay if you unplug
and reconnect the phone. Reset or power cycle the phone with
your system administrator’s assistance.
Contact your system administrator if these steps do not produce
the desired result.
Phone does not ring
Use the Up/Down Volume keys to set your ringer volume to a
higher level. Verify that the “Do Not Disturb” feature is turned off,
using the Select key and the Up/Down Scroll keys to scroll down
to that item. From another phone, place a call to your extension
to test the ringer volume.
A feature does not work as Verify the procedure and retry. For certain features, you must
indicated in this guide (for
example, the Redial key
does not operate as
described)
place the phone off-hook first.
Contact your system administrator if this action does not
produce the desired result. Your phone system might have been
specially programmed for certain features applicable only to
your installation.
All other IP Phone
problems
Contact your system administrator.
Resetting and Power Cycling the 1692 IP Conference
Phone
Reset your phone when other troubleshooting suggestions do not correct the problem or after
being advised to do so by your system administrator. The basic reset procedure can resolve
most problems.
1692 IP Conference Phone User’s Guide
Nov 2009 25
Chapter 4: Managing and Troubleshooting Your Avaya 1692 IP Conference Phone
To reset your phone:
1. Press the Mute key.
2. Using the dial pad, press the following keys in sequence: 73738#
The display shows the message “Reset values? *=no #=yes.”
3. Press * (asterisk) or press # (the pound key):
If you want to
Then
Restart the phone without
resetting any assigned
values.
Press * (the asterisk key).
The display prompts
“Restart phone? *=no
#=yes.”
Reset the phone to any
previously assigned
(programmed) values.
Press # (the pound key).
The display prompts “Are
you sure? *=no #=yes.”
(Use this option only if your If you select yes, the
phone has programmed,
static values.)
display shows the
message “Resetting
values” while your
conference phone resets
its programmed values,
such as the IP address, to
its default values, and
reestablishes the
connection to the server.
Note:
Restarting the phone can take a few minutes.
Note:
If the reset procedure cannot be performed or does not solve the problem, and your system
administrator approves, the phone can be power cycled.
To power cycle the phone:
●
Unplug the phone, and then plug it back in.
The phone reconnects and reinitializes.
Note:
It might take a few minutes before you can use the phone again.
Note:
26 1692 IP Conference Phone User’s Guide
Nov 2009
Chapter 5: Safety Notices
Safety and Compliance
Part 15 FCC Rules
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interferences received, including interference that may cause
undesired operation.
Class B Digital Device or Peripheral
Note: This equipment is tested and complies with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Modifications
In accordance with Part 15 of the FCC Rules, the user is cautioned that any changes or
modifications not expressly approved by Polycom, Inc. could void the user’s authority to
operate the equipment. This equipment may not be used on a coin service or party line.
Installation Instructions
Installation must be performed in accordance with all relevant national wiring rules.
L’Installation doit être exécutée conformément à tous les règlements nationaux applicable au
filage électrique.
When using Power over Ethernet (PoE), the equipment is to be connected only to PoE
networks without connections to the outside plant.
Plugs Acts as Disconnect Device
The socket outlet to which this apparatus is connected must be installed near the equipment
and must always be readily accessible.
La prise électrique à laquelle l’appareil est branché doit être installée près de l’équipement et
doit toujours être facilement accessible.
1692 IP Conference Phone User’s Guide
Nov 2009 27
Chapter 5: Safety Notices
Industry Canada (IC)
Safety and Compliance (continued)
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CE and VCCI Mark
This Avaya 1692 IP Conference Phone is marked with the CE mark. This mark indicates
compliance with EC Directives 2006/95/ED and 2004/108/EC. A full copy of the Declaration of
Conformity can be obtained from Polycom Ltd., 270 Bath Road, Slough, Berkshire, SL1 4DX,
UK.
WARNING Electrical Safety
To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to
teleconference station network (TNV) circuits. LAN ports contain SELV circuit, and WAN ports
contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution
when connecting cables.
This product is rated 48Vdc, 0.375A. When used with the optional external power supply, the
power supply shall be a Listed power supply with a LPS output, rated 48V, min. 0.375A.
New Zealand Telepermit
PTC General Warning
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in all respects with another
item of Telepermitted equipment of a different make or model, nor does it imply that any
product is compatible with all of Telecom’s network services.
The Use of IP Networks through the PSTN
Internet Protocol (IP) by its nature introduces delay into speech signals as each data packet is
formulated and addressed. Telecom Access Standards recommends that suppliers, designers
and installers using this technology for calls to or from the PSTN refer to ITU E Model
requirements in the design of their networks. The overall aim is to minimize delay, distortion
and other transmission impairments, particularly for those calls involving cellular and
international networks, which already suffer extensive delay.
The Use of Voice Compression through the PSTN
Because of the extensive delay already experienced when calling cellular and international
networks, some of which is already caused by their use of voice compression technologies.
Telecom Access Standards will only approve G711 voice technology for use on the PSTN.
G711 is an ‘Instantaneous Speech encoding Technique’ whereas G729 and all its variants are
considered ‘Near Instantaneous’ introducing additional delay into the speech signal.
28 1692 IP Conference Phone User’s Guide
Nov 2009
Safety and Compliance (continued)
New Zealand Telepermit (continued)
Echo Cancellation
Echo cancellers are not normally required in the Telecom PSTN because geographic delays
are acceptable where CPE return loss is maintained within Telepermit limits. However, those
private networks making use of Voice over IP technology are required to provide echo
cancellation for all voice calls. The combined effect of audio / VoIP conversion delay and IP
routing delay can cause the echo cancellation time of 64 mS to be required.
1692 IP Conference Phone User’s Guide
Nov 2009 29
Chapter 5: Safety Notices
30 1692 IP Conference Phone User’s Guide
Nov 2009
Index
A
L
Audience for this guide . . . . . . . . . . . . . . . . 5
Logging off the phone. . . . . . . . . . . . . . . . 19
C
M
Call appearances, selecting . . . . . . . . . . . . 16
Calls
Main menu, accessing . . . . . . . . . . . . . . . 19
Making calls . . . . . . . . . . . . . . . . . . . . 13
Microphones, extension. . . . . . . . . . . . . . . 12
Muting calls . . . . . . . . . . . . . . . . . . . . 15
conference, setting up . . . . . . . . . . . . . 14
dropping . . . . . . . . . . . . . . . . . . . . 16
ending . . . . . . . . . . . . . . . . . . . . . 14
holding. . . . . . . . . . . . . . . . . . . . . 15
making. . . . . . . . . . . . . . . . . . . . . 13
muting . . . . . . . . . . . . . . . . . . . . . 15
receiving . . . . . . . . . . . . . . . . . . . . 14
transferring. . . . . . . . . . . . . . . . . . . 15
Conference calls, setting up . . . . . . . . . . . . 14
Contrast, updating . . . . . . . . . . . . . . . . . 20
Conventions used in this guide . . . . . . . . . . . . 6
P
Personal ringing option, updating . . . . . . . . . . 19
Power cycling the phone . . . . . . . . . . . . . . 25
R
Receiving calls . . . . . . . . . . . . . . . . . . . 14
Related documents . . . . . . . . . . . . . . . . . . 7
Resetting phone parameters . . . . . . . . . . . . 25
Restarting the phone . . . . . . . . . . . . . . . . 26
Ring tone, updating. . . . . . . . . . . . . . . . . 19
Ring tones, interpreting . . . . . . . . . . . . . . . 23
Ringer volume, changing . . . . . . . . . . . . . . 16
D
Defaults, resetting . . . . . . . . . . . . . . . . . 26
Display contrast, updating . . . . . . . . . . . . . 20
Dropping calls . . . . . . . . . . . . . . . . . . . 16
E
S
Ending calls . . . . . . . . . . . . . . . . . . . . 14
Extension microphones . . . . . . . . . . . . . . 12
Selecting call appearances . . . . . . . . . . . . . 16
Server administered features . . . . . . . . . . . . 17
Speaker volume, changing . . . . . . . . . . . . . 16
System information, viewing. . . . . . . . . . . . . 20
H
Holding calls. . . . . . . . . . . . . . . . . . . . 15
How to use this document . . . . . . . . . . . . . . 5
T
Transferring calls . . . . . . . . . . . . . . . . . . 15
Troubleshooting the phone . . . . . . . . . . . . . 23
Typographic conventions used in this guide . . . . . . 6
I
Issue date of this guide. . . . . . . . . . . . . . . . 5
V
K
Volume, changing . . . . . . . . . . . . . . . . . 16
Key/feature descriptions . . . . . . . . . . . . . . . 9
1692 IP Conference Phone User’s Guide
Nov 2009 31
Index
32 1692 IP Conference Phone User’s Guide
Nov 2009
|