|
Securelock
AES-256
User Manual
SecureLock AP provides user to manage the USB flash disk; set password to protect the secure partition,
adjust partition size…
SecureLock Tool Function:
Password Status: No Password/Password Exists
Device Status: Locked/Unlock
Set Password/Change Password
Disable Password
Login/Logout
Configure Size: Adjust partition size.
Your Hint: Password Hint
3
Set Password
1. Execute SecureLock tool and click “Set Password”
2. Please enter your password and your hint in password setup dialog.
Note:
Show Password: Un-crypt the entered password and hit characters.
3. Click “V” to apply the password setting.
4
4. Securelock tool will partition the disk to 2 partitions when password set in first time use. And the data in
the device will be all deleted. Please backup the data first when setting the password. After setting, please
re-plug the device.
5. There will be 2 partitions, one is public area with Securelock tool and one is locked for secure area.
5
Change Password
1. Click the change password button
2. Enter the old password and your new password, hit.
3. Click “V” to change the password. After changing, please use the new password when next time logging
in the disk.
6
Login
1. When the password exists, the secure area is locked and can’t be read. Please use “Login” function to
unlock the disk.
2. Enter your password and then click “V” button
3. If logging in, the secure area will be readable and writeable
7
Logout
1. Please click “Logout” button to lock the secure area immediately.
2. After logging out, the secure area will be locked, can’t be accessed.
8
Disable Password
1. Click “Disable Password” button to clean the password.
2. Enter your password, and then click “V”.
3. If the password is cleaned, all partitions are public to read/write. .
9
Password Hint
1. If you forget the password, you can click the password hint to remind the password.
10
Configure Size
1. Please click the Configure Size button to adjust the partition size. Before adjusting the disk size, please
clean the password firstly.
2. Adjusting the partition size will erase the data in the disk. Please backup your data first.
3. Adjust the score bar to set each partition size and then click the “V”.
4. After partition, please re-plug your device.
11
|