Sony D E990 User Manual

3-045-458-21 (1)  
Portable  
CD Player  
Operating Instructions  
About the area code  
The area code of the location in which you purchased the CD player  
is shown on upper left of the bar code label on the package.  
For accessories supplied with your CD player, check the area code  
of your model and see “Accessories (supplied/optional).”  
D-E990  
D-EJ915  
1999 Sony Corporation  
Table of Contents  
Connecting a power source  
Getting started  
Using the rechargeable batteries ................ 17  
Using dry batteries..................................... 18  
Notes on the power source ........................ 19  
Using the carrying case ............................. 20  
Locating the Controls .................................. 4  
Playing a CD  
1. Connect your CD player. ......................... 6  
2. Insert a CD. ............................................. 6  
3. Play a CD. ............................................... 7  
Additional information  
Precautions ................................................ 21  
Maintenance .............................................. 21  
Troubleshooting ......................................... 22  
Specifications ............................................ 24  
Accessories (supplied/optional) ................ 25  
Playback options  
Playing tracks repeatedly (Repeat play) .... 10  
Playing a single track (Single play) ........... 10  
Playing tracks in random order  
(Shuffle play)......................................... 10  
Playing tracks in your favorite order  
(PGM play)............................................ 11  
Available features  
G-PROTECTION function ........................ 12  
Checking the remaining time on the CD and  
the number of tracks left ....................... 12  
Emphasizing the bass sound (SOUND) .... 13  
Protecting your hearing (AVLS) ................ 13  
Locking the controls (HOLD) ................... 14  
Turning off the operation beep sound........ 14  
Connecting your CD player  
Connecting a stereo system ....................... 15  
Using your CD player in a car ................... 16  
3
Getting started  
Locating the Controls  
For details, see pages in parentheses.  
CD player (front)  
1 EXT BATT (external battery)/  
DC IN 4.5 V (external power  
input) jack (pages 6, 17, 18)  
7 AVLS switch (rear)  
(page 13)  
2 LINE OUT (OPTICAL)  
jack  
(page 15)  
8 ./>  
(AMS/search)  
buttons  
3 HOLD switch  
(page 14)  
(pages 7, 10, 11)  
4 VOLUME +/–  
buttons  
9 i/REMOTE jack  
(page 7)  
(page 6)  
q; u (play/pause)  
button  
5 OPEN switch  
(pages 6)  
(page 7, 11)  
6 CHG (charge)/  
HOLD lamp  
qa x (stop) /CHG (charge)  
button  
(pages 14, 17)  
(pages 7, 14, 17)  
CD player (inside)  
qs Battery compartment  
(pages 17)  
4
Remote control  
(Front)  
qd HOLD switch  
qh Display  
(pages 8, 10 - 14)  
(page 14)  
qj LIGHT button  
Press to illuminate the  
display on the remote  
control for about 5 seconds  
when using the player on  
the rechargeable batteries  
or alkaline batteries.  
qf x (stop) button  
(pages 7, 14)  
qg Jog lever  
u: play/pause (pages 7,11)  
./>: AMS/search  
(pages 7, 10, 11)  
qk VOLUME +/–  
tab (page 7)  
(Rear)  
ql P (play) MODE button  
ws SOUND button  
(pages 9 - 11)  
(page 13)  
wd DISPLAY button  
w; RPT (repeat)/ENT  
(enter) button  
(page 12)  
(pages 9 - 11)  
wa Clip  
You can turn and  
change the angle of the  
clip.  
Note  
Use only the supplied remote control. You cannot  
operate this CD player with the remote control  
supplied with other CD players.  
5
Playing a CD  
You can also use rechargeable batteries, dry batteries and a car battery as a power source.  
1. Connect your CD player.  
to an AC outlet  
1 Connect the AC power adaptor.  
AC power  
adaptor  
2 Connect the headphones/earphones  
with remote control.  
For models supplied with the AC plug  
adaptor  
If the AC power adaptor does not fit the AC  
outlet, use the AC plug adaptor.  
to EXT  
BATT/DC  
IN 4.5V  
For models supplied with the remote  
control.  
• Connect the plug of the headphones/  
earphones to the remote control.  
• Connect the headphones/earphones to  
the remote control firmly. A loose  
connection may cause noise during  
playback.  
to i/  
REMOTE  
Headphones  
or  
Earphones  
u button  
2. Insert a CD.  
1 Slide OPEN to open the CD  
2 Place the CD on the tray and close  
player lid.  
the lid.  
Label side up  
OPEN switch  
6
3. Play a CD.  
Press the jog lever  
Press u.  
toward u.  
Adjust the volume by  
sliding VOLUME.  
Adjust the volume by  
pressing VOLUME + or –.  
Using the remote control  
The lever marked with .-u-> is the jog  
lever. Press or slide the lever to operate your CD  
player.  
Slide  
Slide  
Press  
To  
Do this  
Play/Pause  
Press the jog lever toward u.  
Press x/CHG.*2  
Stop  
Find the beginning of the current track (AMS*1)  
Slide the jog lever toward . once.*2  
Find the beginning of the previous tracks (AMS)  
Slide the jog lever toward .  
repeatedly.*2  
Find the beginning of the next track (AMS)  
Slide the jog lever toward > once.*2  
Find the beginning of the succeeding tracks (AMS)  
Slide the jog lever toward >  
repeatedly.*2  
Go backwards quickly  
Go forward quickly  
Slide and hold the jog lever toward  
..*2  
Slide and hold the jog lever toward  
>.*2  
*1 Automatic Music Sensor  
*2 These operations can be done during both play and pause.  
(Continued)  
7
About the display  
• When you press u after changing the CD or turning off and on the player, the total number  
of tracks in the CD and total playing time appear for about two seconds.  
• During play, the track number and the elapsed playing time of the current track appear.  
• Between tracks, the time to the beginning of the next track appears with the “–” indication.  
• During pause, the elapsed playing time flashes.  
If the volume level does not increase  
Is AVLS set to “LIMIT”? Set AVLS to “NORM.” For details, see “Protecting your hearing  
(AVLS).”  
Playback starts from the point you stopped  
Your CD player can recall the playback point where you stopped and then resume playing from  
the same place (resume function). There is no ON/OFF switch of the resume function on this CD  
player.  
Removing the CD  
Remove the CD while pressing the pivot in the center of the tray.  
8
Playback options  
You can enjoy various ways of playback using the P (play) MODE button and the RPT (repeat)/  
ENT (enter) button.  
P (play) MODE button  
Each time you press the button, you can  
change the playback mode.  
No indication”  
(Normal play)  
“ 1”  
(Play a single track)  
RPT/ENT button  
SHUF”  
RPT (repeat)  
(Play tracks in random order)  
You can repeat play that is selected using  
PLAY MODE.  
PGM”  
(Play tracks in your favorite order)  
ENT (enter)  
You can select tracks for PGM play  
mode.  
x button  
Jog lever  
(u, ./>)  
9
Playing tracks repeatedly (Repeat play)  
You can play tracks repeatedly in normal, single, shuffle and PGM play modes.  
During playback, press RPT/ENT.  
Note on ./>  
During Repeat play, you can locate the first track after the last track by sliding the jog lever  
toward > repeatedly. You can also locate the last track after first track by sliding the jog lever  
toward . repeatedly.  
Playing a single track (Single play)  
During playback, press P MODE  
repeatedly until “1” appears.  
Playing tracks in random order (Shuffle play)  
During playback, press P MODE  
repeatedly until “SHUF” appears.  
10  
Playing tracks in your favorite order (PGM play)  
You can program the CD player to play up to 64 tracks in your favorite order.  
During playback, press P MODE  
repeatedly until “PGM” appears.  
1
Slide the jog lever toward . or  
> to select a track.  
2
3
Track number  
Playing order  
Press RPT/ENT to enter  
the selected track.  
“00” appears and the playing order increases  
by one.  
Repeat steps 2 and 3 to select the tracks in your favorite order.  
4
5
Press the jog lever toward u to start the PGM play.  
To check the program  
During programming:  
Press RPT/ENT repeatedly before step 5.  
During the PGM play:  
Press P MODE repeatedly until “PGM” flashes, then press RPT/ENT.  
Each time you press RPT/ENT, the track number appears.  
Notes  
• When you finish entering the 64th track in step 3, the first selected track appears in the display.  
• If you select more than 64 tracks, the first selected tracks are erased.  
11  
B Available features  
G-PROTECTION  
function  
The G-PROTECTION function has been  
developed to provide excellent protection  
against sound skipping while jogging. This  
function provides a higher level of shock  
protection than the traditional one.  
Checking the remaining  
time on the CD and the  
number of tracks left  
You can check the remaining time on the CD  
and the number of tracks left using  
DISPLAY.  
While jogging, be sure to hold your CD  
player with the OPEN switch facing upward.  
There is no ON/OFF switch of the  
G-PROTECTION function on this CD player  
and its remote control.  
Press DISPLAY.  
Each time you press the button, the display  
changes as follows.  
Display  
Notes  
• Sound may skip if:  
– the CD player receives stronger continuous  
shock than expected or  
Normal play  
Track number and elapsed  
playing time  
– a dirty or scratched CD is played.  
• If you connect the connecting cord or the digital  
connecting cord to the LINE OUT(OPTICAL)  
jack, the G-PROTECTION function does not  
work.  
Press DISPLAY  
once.  
Track number and  
remaining time on the  
current track  
Press DISPLAY  
twice.  
The number of tracks left*  
and remaining time on the  
CD*  
*
Not displayed during Single play, Shuffle play or  
PGM play.  
12  
Emphasizing the bass  
sound (SOUND)  
Protecting your hearing  
(AVLS)  
You can emphasize the bass-boosted sound.  
The AVLS (Automatic Volume Limiter  
System) function keeps down the maximum  
volume to protect your hearing.  
Press SOUND to select “BASS  
“BASS .”  
” or  
Set AVLS to “LIMIT.”  
No indication”  
(Normal play)  
BASS  
BASS  
Flashes when the volume is turned up  
and beyond a certain level.  
The selected sound mode is displayed.  
“BASS  
than “BASS ”.  
” enhances the bass sound more  
To turn off the AVLS function  
Set AVLS to “NORM.”  
Note  
If the sound is distorted when using the SOUND  
function, turn down the volume.  
13  
Locking the controls  
Turning off the  
(HOLD)  
operation beep sound  
You can lock the controls on your CD player  
to prevent accidental button presses.  
You can turn off the beep sound that is heard  
from your headphones/earphones when you  
operate your CD player.  
Slide HOLD in the direction of the  
arrow.  
Remove the power source (AC  
1
power adaptor, rechargeable  
batteries or dry batteries) from the  
CD player.  
Remote control  
CD player  
Connect the power source while  
pressing x/CHG.  
2
To turn on the beep sound  
Remove the power source and then connect  
the power source without pressing x/CHG.  
CHG/HOLD lamp  
flashes while the  
HOLD function is  
working.  
Displayed when the  
HOLD function is  
working.  
You can use the HOLD function with both  
the CD player and remote control. You can  
still operate your CD player using the remote  
control when HOLD on the remote control is  
set to off.  
To unlock the controls  
Slide HOLD in the opposite direction of the  
arrow.  
14  
B Connecting your CD player  
Notes  
Connecting a stereo  
system  
You can listen to CDs through a stereo  
system and record CDs on a cassette tape and  
a MiniDisc. For details, see the instruction  
manual that comes with the connected  
device.  
• Before you play a CD, turn down the volume of  
the connected device to avoid damaging the  
connected speakers.  
• Use the AC power adaptor for recording. If you  
use the rechargeable batteries or dry batteries as a  
power source, batteries may become completely  
depleted during recording.  
• Adjust the volume properly on the connected  
device so that the sound will not be distorted.  
Be sure to turn off all connected devices  
before making connections.  
When using the connecting cord  
You cannot adjust the volume of the  
headphones/earphones on the CD player or  
the remote control.  
• If the sound is distorted, connect the device  
to the i/REMOTE jack.  
When using the optical digital  
connecting cord  
To record a CD on a MiniDisc, DAT, etc.,  
make sure that the CD player is in pause  
before operating the recording procedures.  
to LINE OUT  
(OPTICAL)  
About the G-PROTECTION and  
SOUND functions when using the  
connecting cord or optical digital  
connecting cord  
See the following table for valid functions  
according to the types of connecting cord:  
Connecting  
cord  
Optical  
digital  
connecting  
cord  
G-PROTECTION SOUND  
Left (white)  
Right (red)  
Connecting cord  
No  
No  
No  
Optical digital  
Yes*  
connecting cord  
* Functions only on the output sound from the  
i/REMOTE jack; does not function on the  
output sound from the LINE OUT (OPTICAL)  
jack.  
Stereo system,  
MiniDisc  
recorder, DAT  
deck, etc.  
cassette recorder,  
radio cassette  
recorder, etc.  
15  
Using your CD player in  
a car  
You can use your CD player in a car by  
connecting it to the car cassette deck.  
You cannot use the car mount plate for this  
CD player.  
When you use your CD player in a car,  
install it securely in a location that does not  
interfere with your driving.  
Optional car accessory needed  
To connect your CD player to a car cassette  
deck, you need the following car accessories  
in “Accessories (supplied/optional)”:  
• Car battery cord, and  
• Car connecting pack*  
For details, see the instruction manuals that  
come with the optional accessories.  
* Noise may be heard if you use an optional  
connecting cord. It is recommended that you use  
a Sony car connecting pack to reduce noise.  
Switched ignition function (when  
using the car battery cord)  
With this feature, your CD player stops  
automatically when you turn off the car  
engine (turn off the ignition key) even if the  
batteries are inserted in the CD player. This  
function is invalid depending on the car  
models.  
Note  
Use only the car battery cord listed in “Accessories  
(supplied/optional).” If you use any other car  
battery cord, a heat, smoke or malfunction may  
occur.  
16  
B Connecting a power source  
You can use the following power sources:  
• Rechargeable batteries  
• AC power adaptor (see “Playing a CD”)  
• LR6 (size AA) alkaline batteries (battery  
case)  
Connect the AC power adaptor to  
the EXT BATT/DC IN 4.5 V jack of  
your CD player and an AC outlet,  
then press x/CHG to start  
charging.  
3
For the battery life and charging time of the  
rechargeable batteries, see “Specifications.”  
If the AC power adaptor does not fit the  
AC outlet, use the AC plug adaptor.  
x/CHG button CHG/HOLD lamp  
Using the rechargeable  
batteries  
Charge the rechargeable batteries before  
using them for the first time. You can use  
only the following rechargeable batteries for  
your CD player.  
• NH-14WM  
Open the battery compartment lid  
inside your CD player.  
1
to EXT BATT/  
DC IN 4.5 V  
AC power adaptor  
to an AC outlet  
The CD player charges the batteries. The  
indicator sections of  
in the display  
Insert two rechargeable batteries  
2
of the remote control light up in  
succession and the CHG/HOLD lamp  
lights up.  
When the batteries are completely  
charged, all indications in the display  
disappear and the CHG/HOLD lamp  
goes off.  
by matching the 3 to the diagram  
in the battery compartment and  
close the lid.  
If you press x/CHG after the charge has  
already been completed, the  
indicator flashes and “Full” appears in  
the display, and the CHG/HOLD lamp  
flashes.  
Put the end of the  
ribbon inside.  
Disconnect the AC power adaptor.  
4
(Continued)  
17  
When to replace the rechargeable  
batteries  
Using the rechargeable batteries  
If the battery life becomes shorter by about  
half, replace the batteries with new  
rechargeable batteries.  
To remove the rechargeable batteries  
Pull the ribbon.  
Note on the rechargeable batteries  
If the battery is new or has not been used for  
a long time, it may not be charged  
completely until you charge and discharge it  
several times.  
Note on carrying the rechargeable  
batteries  
Use the supplied battery carrying case to  
prevent unexpected heat. If the rechargeable  
batteries and the metallic objects are  
contacted, heat or fire may occur due to a  
short circuit.  
When to charge the rechargeable  
batteries  
You can check the remaining power of the  
batteries in the display.  
Battery power is full.  
r
Using dry batteries  
Make sure to use the supplied battery case.  
Use only the following dry battery type for  
your CD player:  
r
Battery power is getting low.  
r
• LR6 (size AA) alkaline batteries  
r
Battery power is low.  
Remove the cap of the battery  
r
1
Lo batt* Batteries are depleted.  
* Beep sounds.  
case, and insert two LR6 (size AA)  
alkaline batteries by matching the  
3 to the diagram outside the  
battery case and close the cap of  
the battery case.  
To keep the original battery capacity for a  
long time, charge the batteries only when  
they are completely depleted.  
Notes  
• The indicator sections of  
roughly show the  
remaining battery power. One section does not  
always indicate one-fourth of the battery power.  
• Depending on operating conditions, the indicator  
sections of  
may increase or decrease.  
18  
Connect the battery case to the  
CD player.  
Notes on the power  
source  
2
Disconnect all power sources when the CD  
player is not used.  
to EXT BATT/  
DC IN 4.5 V  
On AC power adaptor  
• Use only the AC power adaptor supplied or  
recommended in “Accessories (supplied/  
optional).” Do not use any other AC power  
adaptor. It may cause a malfunction.  
With the v side down  
Polarity of the plug  
When to replace the batteries  
You can check the remaining power of the  
batteries in the display.  
• When disconnecting the AC power adaptor  
from the AC outlet, grasp the adaptor  
itself. Do not pull it by the cord.  
• Do not touch the AC power adaptor with  
wet hands.  
Battery power is full.  
r
r
Battery power is getting low.  
r
On rechargeable batteries  
and dry batteries  
r
• Do not charge the dry batteries.  
• Do not throw the batteries into fire.  
• Do not carry the batteries with coins or  
other metallic objects. It can generate heat  
if the positive and negative terminals of the  
battery are accidentally contacted by a  
metallic object.  
Battery power is low.  
r
Lo batt* Batteries are depleted.  
* Beep sounds.  
When the batteries are depleted, replace both  
batteries with new ones.  
The batteries in the CD player and battery  
case are discharged simultaneously.  
• Do not mix rechargeable batteries with dry  
batteries.  
• Do not mix new batteries with old ones.  
• Do not use different types of batteries  
together.  
• When the batteries are not to be used for a  
long time, remove them.  
• If battery leakage occurs, wipe off any  
deposit in the battery compartment, and  
install new batteries. In case the deposit  
adheres to you, wash it off thoroughly.  
Notes  
• Be sure to remove the AC power adaptor when  
attaching the battery case.  
• When using the rechargeable batteries and dry  
batteries together to extend power, use fully  
charged rechargeable batteries and new dry  
batteries.  
19  
Using the carrying case  
You can carry your player and its battery  
case together using the supplied carrying  
case.  
Insert them into the proper places in the case  
as illustrated below.  
20  
B Additional information  
On headphones/earphones  
Road safety  
Precautions  
Do not use headphones/earphones while  
driving, cycling, or operating any motorized  
vehicle. It may create a traffic hazard and is  
illegal in some areas. It can also be  
potentially dangerous to play your headsets  
at high volume while walking, especially at  
pedestrian crossings. You should exercise  
extreme caution or discontinue use in  
potentially hazardous situations.  
On safety  
• Should any solid objects or liquid fall into  
the CD player, unplug it and have it  
checked by qualified personnel before  
operating it any further.  
• Do not put any foreign objects in the DC  
IN 4.5 V (external power input) jack.  
On the CD player  
• Keep the lens on the CD player clean and  
do not touch it. If you do so, the lens may  
be damaged and the CD player will not  
operate properly.  
Preventing hearing damage  
Avoid using headphones/earphones at high  
volume. Hearing experts advise against  
continuous, loud and extended play. If you  
experience a ringing in your ears, reduce  
volume or discontinue use.  
• Do not put any heavy object on top of the  
CD player. The CD player and the CD may  
be damaged.  
• Do not leave the CD player in a location  
near heat sources, or in a place subject to  
direct sunlight, excessive dust or sand,  
moisture, rain, mechanical shock,  
unleveled surface, or in a car with its  
windows closed.  
Consideration for others  
Keep the volume at a moderate level. This  
will allow you to hear outside sounds and to  
be considerate to the people around you.  
• If the CD player causes interference to the  
radio or television reception, turn off the  
CD player or move it away from the radio  
or television.  
Maintenance  
To clean the casing  
Use a soft cloth slightly moistened in water  
or a mild detergent solution. Do not use  
alcohol, benzine or thinner.  
On handling CDs  
• To keep the CD clean, handle it by its  
edge. Do not touch the surface.  
• Do not stick paper or tape onto the CD.  
Not these ways  
• Do not expose the CD to direct sunlight or  
heat sources such as hot air ducts. Do not  
leave the CD in a car parked under direct  
sunlight.  
21  
Troubleshooting  
Should any problem persist after you have checked these symptoms, consult your nearest Sony  
dealer.  
Symptom  
Cause and/or corrective actions  
The volume does not increase  
even if you press the VOLUME  
+ button repeatedly.  
c
c
Set the AVLS switch to “NORM.” (page 13)  
The headphones/earphones are connected to the LINE OUT  
(OPTICAL) jack. Connect them to the i/REMOTE jack.  
(page 6)  
No sound, or noise is heard.  
c
c
Connect the plugs firmly. (page 6)  
Plugs are dirty. Clean the plugs with a dry soft cloth periodically.  
The playing time is too short  
when powered with the dry  
batteries.  
c
Check that you are using alkaline batteries and not manganese  
batteries. (page 18)  
Replace the batteries with new LR6 (size AA) alkaline batteries.  
(page 18)  
c
The playing time is too short  
when powered with the  
rechargeable batteries.  
c
Charge and discharge the rechargeable batteries several times.  
(pages 17, 18)  
When you press u, “ Lo  
batt” or “ 00” appears in the  
display. The CD does not  
play.  
c
c
The rechargeable batteries are used up completely. Charge the  
batteries. (page 17)  
Replace the batteries with new LR6 (size AA) alkaline batteries.  
(page 18)  
HI dc In” appears in the  
display.  
c
c
Use only the AC power adaptor or car battery cord in “Accessories  
(supplied/optional).” (page 25)  
Remove all power sources, then insert the batteries or connect the  
AC power adaptor again. (pages 6, 17, 18)  
The CD does not play or  
“ no dISC appears in the  
display when a CD is placed  
in the CD player.  
c
c
c
The CD is dirty or defective. (page 21)  
Check that the CD is inserted with the label side up. (page 6)  
Moisture condensation has occurred.  
Leave the CD player aside for several hours until the moisture  
evaporates.  
c
Close the lid of the battery compartment firmly.  
(pages 17)  
c
c
Make sure the batteries are inserted correctly. (pages 17, 18)  
Connect the AC power adaptor to an AC outlet securely. (page 6)  
CHG/HOLD lamp flashes  
when you press a button, and  
the CD does not play.  
c
The buttons are locked. Slide the HOLD switch back. (page 14)  
Cannot adjust the volume  
with the VOLUME +/– buttons  
on the CD player.  
c
The CD player is connected to an audio device. Adjust the volume  
using the volume control on the connected device. (page 15)  
22  
Symptom  
Cause and/or corrective actions  
During recording with optical  
digital connection, the track  
number cannot be recorded  
correctly.  
c
Record the track number again using the MiniDisc recorder, DAT  
recorder, etc. (page 15)  
See the instruction manual that comes with the recording device.  
(page 15)  
c
The CD player does not start  
charging.  
c
During stop, press  
x/CHG. (page 17)  
23  
• AC power adaptor (DC IN 4.5 V jack):  
U2/CA2/E92/MX2 model: 120 V, 60 Hz  
CED/CET/CEW/CEX/CE7/EE/EE1/E13/G5/  
G6/G7/G8 model:  
Specifications  
System  
Compact disc digital audio system  
220 - 230 V, 50/60 Hz  
CEK/3CE7 model: 230 - 240 V, 50 Hz  
EA3 model: 110 - 240 V, 50/60 Hz  
AU2 model: 240 V, 50 Hz  
JE.W/E33 model: 100 - 240 V, 50/60 Hz  
HK2 model: 220 V, 50/60 Hz  
Laser diode properties  
Material: GaAlAs  
Wavelength: λ = 780 nm  
Emission duration: Continuous  
Laser output: Less than 44.6 µW  
(This output is the value measured at a distance  
of 200 mm from the objective lens surface on  
the optical pick-up block with 7 mm aperture.)  
AR1/CN2 model: 220 V, 50 Hz  
• Sony DCC-E245 car battery cord for use on  
car battery: 4.5 V DC  
Battery life* (approx. hours)  
(When you use the CD player on a flat and stable  
surface.)  
D-A conversion  
1-bit quartz time-axis control  
Playing time varies depending on how the CD  
player is used.  
Frequency response  
+1  
20 - 20,000 Hz dB (measured by EIAJ CP-  
–2  
307)  
Two NH-14WM  
(charged for  
about 4 hours**)  
23  
Output (at 4.5 V input level)  
Line output (stereo minijack)  
Output level 0.7 V rms at 47 kilohms  
Recommended load impedance over 10  
kilohms  
Headphones (stereo minijack)  
Approx. 5 mW + Approx. 5 mW at 16 ohms  
(Approx. 0.15 mW + Approx. 0.15 mW  
at 16 ohms)*  
Battery case (two  
alkaline batteries)  
37  
57  
Rechargeable batteries  
NH-14WM and battery  
case (two alkaline  
batteries)  
* Measured value by the standard of EIAJ  
(Electronic Industries Association of Japan).  
** Charging time varies depending on how the  
rechargeable battery is used.  
*For the customers in France  
Optical digital output (optical output connector)  
Output level: –21 - –15 dBm  
Wavelength: 630 - 690 nm at peak level  
Operating temperature  
5°C - 35°C (41°F - 95°F)  
Power requirements  
For the area code of the model you  
purchased, check the upper left side of the  
bar code on the package.  
• Two Sony NH-14WM rechargeable batteries:  
2.4 V DC  
Dimensions (w/h/d) (excluding  
projecting parts and controls)  
Approx. 127.2 × 19 × 130.1 mm  
(5 18 × 34 × 5 18 in.)  
• Two LR6 (size AA) batteries: 3 V DC  
Mass (excluding rechargeable  
batteries)  
Approx. 167.5 g (6.0 oz)  
Design and specifications are subject to change  
without notice.  
24  
Optional accessories  
Accessories  
(supplied/optional)  
AC power adaptor  
AC-E45HG  
Active speaker system  
SRS-Z1  
SRS-Z1000  
Supplied accessories  
For the area code of the location in which you  
purchased the CD player, check the upper left side  
of the bar code on the package.  
Car battery cord  
DCC-E245  
Car battery cord with car connecting pack  
DCC-E26CP  
AC power adaptor (1)  
Car connecting pack  
Connecting cord  
CPA-9  
Headphones/earphones with remote control (1)  
Rechargeable batteries (2)  
Battery carrying case (2)  
Carrying case (1)  
RK-G129HG  
RK-G136HG  
Optical digital connecting cord  
POC-5B  
Battery case (1)  
AC plug adaptor (1)*  
POC-10B  
POC-15B  
POC-5AB  
POC-10AB  
POC-15AB  
*
Supplied with JE.W and E33 models  
For US customers  
The AC power adaptor supplied is not intended to  
be serviced. Should the AC power adaptor cease to  
function in its intended manner, during the warranty  
period, the adaptor should be returned to your  
nearest Sony Service Center or Sony Authorized  
Repair Center for replacement, or after warranty  
period, it should be discarded.  
Earphones  
MDR-E848LP  
MDR-EX70LP  
When connecting optional  
headphones/earphones to the  
supplied remote control  
Use only headphones with stereo mini plugs.  
You cannot use headphones with micro  
plugs.  
Stereo miniplug  
Micro plug  
Your dealer may not handle some of the  
above listed accessories. Please ask the  
dealer for detailed information about the  
accessories in your country.  
25  
Sony Corporation Printed in Malaysia  

Yamaha CRW4261t User Manual
Toshiba Canvio Basics Hard Drive HDTB110XK3BA User Manual
Sony PEG NZ90 User Manual
Sony D FJ405 User Manual
Sony CDX F5710 User Manual
SmartDisk FotoChute Portable Hard Drive User Manual
Seagate SAVVIO 10K5 FC ST9450405FC User Manual
Seagate PIPELINE HD MINI SERIES SATA ST9500323CS User Manual
Samsung SGH A837 Series User Manual
Philips AZ 6819 User Manual