Siemens SL370 User Manual

Issued by

Gigaset

SL370 / SL375

Siemens Home and Ofﬁce Communication Devices GmbH & Co. KG

Schlavenhorst 66

D-46395 Bocholt

Rights of modiﬁcation reserved.

Gigaset

www.siemens.com/gigaset

Handset at a glance

1 Display (screen) in idle status

Handset at a glance

2 Charge status of the battery pack

= e V U (flat to full)

= flashes: battery pack almost flat

e V U flashes: battery pack charging

3 Display keys (page 10)

4 Message key

Access to calls and message lists;

Flashes: new message or new call

5 End call key, On/Off key

End call, cancel function, go back one menu

level (press briefly), back to idle status

(press and hold), activate/deactivate hand-

set (press and hold in idle status)

6 Hash key

Keypad lock on/off (press and hold in idle

status),

òÃ

INT 1

15.11.07

09:45

SMS

Toggle between upper/lower case and digits

(press and hold)

7 Call-by-call list key

Open call-by-call list

8 Connection socket for PC interface

9 Microphone

10 Recall key

- Confer (flash)

- Insert a dialling pause (press and hold)

11 Star key

Ringer tones on/off (press and hold),

With an open connection: switch between

dial pulsing/touch tone dialling (press

briefly),

Open special characters table

12 Key 1

Select answer machine (Gigaset SL375

only)/network mailbox (press and hold)

13 Talk key

Answer a call, open last number redial list

(press briefly), start dialling (press and hold)

When writing a SMS: send SMS

14 Handsfree key

Switch between earpiece and handsfree

mode;

Lights up: handsfree activated;

Flashes: incoming call

Base station at a glance

15 Control key (page 10)

16 Bluetooth activated (page 55)

17 Eco mode activated (page 12)

18 Signal strength

Ð i Ñ Ò (high to low)

| flashes: no reception

19 Answer machine icon (Gigaset SL375 on-

ly): answer machine switched on;

Flashes: answer machine is recording a mes-

sage or is being operated by another inter-

nal party

Registration/paging key

(page 43)

Contents

Notification by SMS . . . . . . . . . . . . . . . 31

SMS mailboxes . . . . . . . . . . . . . . . . . . 32

Setting SMS centres . . . . . . . . . . . . . . 33

SMS inf o services . . . . . . . . . . . . . . . . 33

SMS on a PABX . . . . . . . . . . . . . . . . . . 34

Activating/deactivating the

Contents

Handset at a glance . . . . . . . . . . . 1

Base station at a glance . . . . . . . . 1

Safety precautions . . . . . . . . . . . . 4

SMS function . . . . . . . . . . . . . . . . . . . . 34

SMS troubleshooting . . . . . . . . . . . . . 35

Gigaset SL370/SL375 –

More than just a telephone . . . . . 6

Answer machine operation

First steps . . . . . . . . . . . . . . . . . . . . 6

Pack contents . . . . . . . . . . . . . . . . . . . . 6

Installing the base station and

charging cradle . . . . . . . . . . . . . . . . . . . 6

Setting up the handset for use . . . . . . . 7

(Gig aset SL375 only) . . . . . . . . . 36

Operation via the handset . . . . . . . . . 36

Activating/deactivating

call screening . . . . . . . . . . . . . . . . . . . 39

Setting up the answer machine . . . . . 39

Rese tting fast access for the

answer machine using key 1 . . . . . . . 40

Operat ing when on the move

(remote control) . . . . . . . . . . . . . . . . . 40

Operating the handset . . . . . . . . 10

Control key . . . . . . . . . . . . . . . . . . . . . 10

Display keys . . . . . . . . . . . . . . . . . . . . 10

Reverting to idle status . . . . . . . . . . . . 11

Menu guidance . . . . . . . . . . . . . . . . . 11

Correcting incorrect entries . . . . . . . . 12

Using the network mailbox . . . 42

Configuring fast access for

the network mailbox . . . . . . . . . . . . . . 42

Viewing the network mailbox report . 42

ECO DECT . . . . . . . . . . . . . . . . . . . 12

Menu tree . . . . . . . . . . . . . . . . . . 13

Using se veral handsets . . . . . . . 43

Registering handsets . . . . . . . . . . . . . . 43

De-registering handsets . . . . . . . . . . . 43

Locating a handset ("paging") . . . . . . 43

Changing the base station . . . . . . . . . 43

Making internal calls . . . . . . . . . . . . . . 44

Listening in to an external call . . . . . . 45

Changing the name of a handset . . . . 45

Changing a handset's internal

Making calls . . . . . . . . . . . . . . . . . 16

Making an external call . . . . . . . . . . . 16

Ending a call . . . . . . . . . . . . . . . . . . . . 16

Accepting a call . . . . . . . . . . . . . . . . . 16

Calling Line Identification . . . . . . . . . 17

Handsfree talking . . . . . . . . . . . . . . . . 18

Muting . . . . . . . . . . . . . . . . . . . . . . . . 18

Making calls using

network services . . . . . . . . . . . . . 19

number . . . . . . . . . . . . . . . . . . . . . . . . 45

Using a handse t as a room monitor . . 46

Walky-talky mode . . . . . . . . . . . . . . . . 47

Using the directory and lists . . . 20

Directory/call-by-call list . . . . . . . . . . . 20

Last number redial list . . . . . . . . . . . . 23

Opening lists with the message key . 24

Handset settings . . . . . . . . . . . . 48

Shortcuts for functions and

numbers . . . . . . . . . . . . . . . . . . . . . . . 48

Changing the display language . . . . . 49

Setting the display . . . . . . . . . . . . . . . 49

Setting the screensaver . . . . . . . . . . . . 49

Setting the display backlight . . . . . . . . 50

Activating/deactivating

Making cost-effective calls . . . . 26

Linking call-by-call numbers

with one number . . . . . . . . . . . . . . . . 26

Automatic network provider

preselection (Preselection) . . . . . . . . . 26

auto answer . . . . . . . . . . . . . . . . . . . . 50

Changing the handsfree/

earpiece volume . . . . . . . . . . . . . . . . . 50

SMS (text messages) . . . . . . . . . . 28

Writing/sending a SMS . . . . . . . . . . . . 28

Receiving a SMS . . . . . . . . . . . . . . . . . 30

Contents

Changing ringer tones . . . . . . . . . . . . 50

My stuff . . . . . . . . . . . . . . . . . . . . . . . 52

Activating/deactivating

advisory tones . . . . . . . . . . . . . . . . . . 52

Setting the alarm clock . . . . . . . . . . . . 53

Setting an appointment (calendar) . . 54

Displaying missed appointments

Notes on the user guide . . . . . . 64

Example of a menu input . . . . . . . . . . 64

Example of multiple line input . . . . . . 64

Writing and editing text . . . . . . . . . . . 65

A dditional functions via the

PC interface . . . . . . . . . . . . . . . . 66

and anniversaries . . . . . . . . . . . . . . . . 55

Using Bluetooth devices . . . . . . . . . . . 55

Setting your own area code . . . . . . . . 57

Restoring the handset to

Index . . . . . . . . . . . . . . . . . . . . . . 67

Warranty Card . . . . . . . . . . . . . . 73

Wall-mounting the

factory settings . . . . . . . . . . . . . . . . . . 57

base station . . . . . . . . . . . . . . . . 75

Base station settings . . . . . . . . . . 58

Protecting against unauthorised

access . . . . . . . . . . . . . . . . . . . . . . . . . 58

Activating/deactivating

music on hold . . . . . . . . . . . . . . . . . . . 58

Repeater support . . . . . . . . . . . . . . . . 58

Restoring the base station to

the factory settings . . . . . . . . . . . . . . 58

Connecting the base station

to the PABX . . . . . . . . . . . . . . . . . 59

Dialling modes and recall . . . . . . . . . . 59

Saving an access code

(outside line code) . . . . . . . . . . . . . . . 59

Setting pauses . . . . . . . . . . . . . . . . . . 60

Switching temporarily to

tone dialling (DTMF) . . . . . . . . . . . . . . 60

Appendix . . . . . . . . . . . . . . . . . . . 61

Care . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Contact with liquid . . . . . . . . . . . . . . . 61

Questions and answers . . . . . . . . . . . 61

Customer Care . . . . . . . . . . . . . . . . . . 62

Accessories . . . . . . . . . . . . . . . . . . . . . 63

Specifications . . . . . . . . . . . . . . . . . . . 63

Safety precautions

Warning:

Read the safety precautions and the user guide before use.

Explain their contents and the potential hazards associated with using the telephone to your children.

Only use the mains adapter supplied, as indicated on the underside of the base

station or charging cradle.

Fit only the approved rechargeable battery pack (page 63)! That means never

use a conventional (non-rechargeable) battery pack, as this could result in sig-

nificant health risks and personal injury.

Battery packs should not be disposed of in general household waste. Observe

the local waste disposal regulations, which you can find out about by contacting

your local authority or the dealer you purchased the product from.

The operation of medical appliances may be affected. Be aware of the technical

conditions in your particular environment, e.g. doctor's surgery.

Do not hold the rear of the handset to your ear when it is ringing or when the

handsfree function is activated. Otherwise you risk serious and permanent dam-

age to your hearing.

The handset may cause an unpleasant humming noise in hearing aids.

Do not install the base station or charging cradle in bathrooms or shower rooms.

The base station and charging cradle are not splashproof (page 61).

Do not use your phone in environments with a potential explosion hazard,

e.g. paint shops.

If you give your Gigaset to someone else, make sure you also give them the user

guide.

Please remove faulty base stations from use or have them repaired by Siemens

Service Centre, as they could interfere with other wireless services.

Safety precautions

All electrical and electronic equipment must be disposed of separately from gen-

eral household waste using the sites designated by local authorities.

If a product displays this symbol of a crossed-out rubbish bin, the product is sub-

ject to European Directive 2002/96/EC.

The appropriate disposal and separate collection of used equipment serve to

prevent potential harm to the environment and to health. They are a precondi-

tion for the re-use and recycling of used electrical and electronic equipment.

For further information on disposing of your used equipment, please contact

your local authority, your refuse collection service or the dealer you purchased

the product from.

Please note:

Not all of the functions described in this manual are available in all countries.

Gigaset SL370/SL375 – More than just a telephone

Gigaset SL370/SL375 –

First steps

More than just a telephone

Pack contents

Your phone, which has a clearly laid out

colour display (65K colours) doesn't just

offer you the option of sending and receiv-

ing SMS messages via the fixed network

and of saving up to 250 phone numbers

and e-mail addresses (page 20) – it can do

much more than that:

u one Gigaset SL370/SL375 base station

with mains adapter,

u one Gigaset SL37H handset,

u one charging cradle with mains

adapter,

u one phone cord,

u one battery pack,

u one battery cover,

u one belt clip,

u You can reduce the transmission power

by activating the eco mode (page 12).

u You can programme the keys of your

phone with important numbers or fre-

quently used functions. The number is

then dialled or the function started by

simply pressing a key (page 48).

u one user guide.

Installing the base station and

charging cradle

u You can easily make calls using network

services (page 19).

u You can designate important people as

VIPs so you can tell important calls from

the ringer tone (page 21).

The base station and charging cradle are

designed for use in enclosed dry rooms

with a temperature range of +5 °C to

+45 °C.

u You can assign pictures to your con-

tacts. You can then tell who is calling

you from the picture on your handset's

display.

Set up the base station at a central point in

the apartment or house.

Precondition:CallingLineIdentification

(CLIP, page 17).

You can find instructions on how to mount

the base station on the wall at the end of

this user guide (page 75).

u You can store appointments (page 54)

and anniversaries (page 23) in your

phone and it will remind you of them in

advance.

Please note:

u Never expose the telephone to heat

sources, direct sunlight or other electri-

cal appliances.

u You can use Bluetooth™ for wireless

communication with other devices

(e.g. headsets) that also use this tech-

nology (see page 55).

u Protect your Gigaset from moisture,

dust, corrosive liquids and vapours.

Enjoy using your new telephone!

First steps

u If you buy a replacement phone cord,

make sure that the phone jack has the

correct type of wiring.

Range and reception strength

Range:

u Outdoors: up to 300 m

u Indoors: up to 50 m

The range is reduced when eco mode is on

(see page 12).

Correct phone jack assignment

1 unused

2 unused

3 a

4 b

5 unused

6 unused

Reception strength:

The display shows the quality of the radio

contact between the base station and

handset:

Setting up the handset for use

u Good to poor: Ð i Ñ Ò

The display is protected

by a plastic film.

u No reception: | flashes

Please remove the

protective film!

Connecting the base station

¤ First connect the mains unit and then

the phone jack as shown below and

place the cable in the cable channels.

Fitting the battery pack

Warning:

Only use the rechargeable Siemens original

battery pack (page 63)! Never use a conven-

tional (non-rechargeable) battery or other bat-

tery types as this could result in significant

health risks and personal injury. For example,

the batteries could explode. The phone could

also malfunction or be damaged as a result of

using batteries that are not of the recom-

mended type.

¤ With the pins to the front, insert the

battery pack into the cavity at an angle

¤ ^fT^rh^oe^mn ^tp^hr^ees^ls^efi^tt^.into the housing from

above until the bracket on the side of

the battery back snaps securely into the

housing.

1 Underside of the base station

(detailed view)

2 Mains adapter 240 V

3 Phone jack with phone cord

Please note:

u The mains adapter must always be

connected, as the phone will not oper-

ate without mains connection.

u Only use the mains adapter and phone

cord supplied.

First steps

Please note:

Opening the battery cover

¤ If fitted, remove the belt clip.

To remove the battery pack, you must first

press the bracket on the side.

¤ Lift the device with the keypad facing

¤ ^tP^hla^ec^pe^at^lh^me ^oth^fu^ym^oub^ro^hf^ayⁿo^du^.r other hand on

the loudspeaker (a) and use the index

finger of the same hand to press the

groove at the top of the handset (b).

Closing the battery cover

¤ Align the battery cover parallel to the

casing and press down until it clicks

into place.

¤ Lift the cover.

Attaching the belt clip

Placing the handset in the charging

cradle

There are notches for attaching the belt

clip on the side of the handset at the same

height as the display.

¤ Plug the charging cradle mains adapter

¤ ⁱPⁿla^toce^at^mhe^aihⁿa^sn^pd^os^wet^ei^rn^st^oh^ce^kec^th^.arging cra-

¤ Press the belt clip onto the back of the

handset so that the protrusions on the

belt clip engage with the notches.

dle with the display facing forward.

The handset is already registered with the

base station at the factory. INT 1 appears in

the display. You do not have to re-register.

If, nonetheless, you have to register your

handset with the base station, see

page 43.

Please note:

You can change the name of the handset

(page 45).

To charge the battery pack, leave the

handset in the charging cradle.

Please note:

–

If the handset has switched itself off

because the battery pack is flat and is then

placed in the charging cradle, it will switch

itself on automatically.

–

Only place the handset in the charging cra-

dle that is intended for it.

For questions and problems see page 61.

First steps

Initial charging and discharging of the

battery pack

Setting the date and time

Set the date and time so that the correct

date and time can be assigned to incom-

ing calls, and so that the alarm and the cal-

endar can be used.

If the handset is activated, the flashing

battery icon e in the top right of the dis-

play indicates that the battery pack is

being charged.

¤ If you have not yet set the date and

time, press the display key §Time§ to open

the input field.

During handset operation, the battery

icon indicates the charge status of the bat-

tery pack (page 1). The correct charge sta-

tus can only be displayed if the battery

pack is first fully charged and discharged.

¤ To do this, leave the handset in the

charging cradle continuously for ten

hours. Your handset need not be

¤ ^sA^wftⁱe^tcrw^hea^drd^osⁿ, r^fe^om^{r i}o^tv^te^ot^ch^he^arh^ga^en^.dset from

the charging cradle and do not put it

back again until the battery pack is fully

discharged.

To change the time, open the input field

with:

w ¢Ð ¢Date/Time

¤ Change multiple line input:

Date:

Enter the day, month and year in 8-digit

format.

Time:

Enter hours and minutes as 4 digits

(e.g. Q M ꢀ 5 for 07:15 a.m.

§Save§

Press the display key

Please note:

Display in idle status

After the first battery charge and discharge,

you may place your handset in the charging

cradle after every call.

Once the phone is registered and the time

set, the idle display looks as shown here

(example). If the answer machine (Gigaset

SL375 only) is activated, the answer

machine icon × will also be displayed in

the header:

Please note:

u Always repeat the charging and dis-

charging procedure if you remove the

battery pack from the handset and

insert it again.

u The battery pack may warm up as it is

INT 1

charging. This is not dangerous.

u After a time the charge capacity of the

battery pack will decrease for technical

reasons.

15.11.07

07:15

SMS

Your answer machine is set with a stand-

ard announcement.

Your phone is now ready for use.

If you have any queries about using your

phone, please read the tips on trouble-

shooting ("Questions and answers,

page 61) or contact our customer service

department ("Customer Care", page 62).

Operating the handset

In the main menu, submenus and lists

Operating the handset

t / s Scroll up/down line by line.

Open menu or confirm selec-

tion.

Activating/deactivating the handset

Go back one menu level or

cancel.

In idle status, press and hold

the end call key (confirma-

tion tone).

In input fields

You can use the control key to move the

cursor up t, down s, right v or

left u.

Activating/deactivating the keypad

lock

Press and hold the hash key.

During an external call

You will hear the confirmation tone. The

Ø icon appears in the display when the

keypad lock is activated.

Open the directory.

Initiate internal consultation

call and mute.

The keypad lock is deactivated automati-

cally if someone calls you. It is reactivated

when the call is finished.

Change the earpiece volume

or handsfree volume.

Display keys

Control key

The function of the display keys changes

depending on the particular operating sit-

uation. Example:

SMS

Below, the side of the control key that you

must press in the respective operating sit-

uation is marked in black (top, bottom,

right, left, centre), e.g. v for "press right

on the control key" or w for "press the

centre of the control key".

1 Current display key functions are shown in

the bottom display line.

2 Display keys

The control key has a number of different

functions:

The most important display icons are:

}

Left display key, as long as it

has not been assigned a func-

tion (page 48).

When the handset is in idle status

Open the directory.

w / v Open the main menu.

Open the main menu.

Open list of handsets.

§Options§

Open a context-dependent

menu.

Call up the menu for setting

the handset's call volume

(page 50), ringer tones

(page 50), advisory tones

(page 52) and silent alert

(page 51).

Delete key: deletes one char-

acter at a time from right to

left.

Go back one menu level or

cancel operation.

Operating the handset

Fetch e-mail address from the

directory.

Submenus

The functions in the submenus are dis-

played as lists.

Copy number into directory.

Forward external call to the

answer machine (Gigaset

SL375 only).

To access a function:

¤ Scroll to the function with the control

key q and press §OK§.

•

Open the last number redial

list.

Or:

¤ Enter the corresponding digit combina-

tion (page 13).

Reverting to idle status

Briefly press the end call key a once to

return to the previous menu level / cancel

the operation.

You can revert to idle status from any-

where in the menu as follows:

¤ Press and hold the end call key a.

Illustration in the user guide

Or:

The operating steps are shown in abbrevi-

ated form.

¤ Do not press any key: after 10 seconds

the display will automatically revert to

idle status.

Example

Changes that you have not confirmed or

saved by pressing §OK§, §Yes§, §Save§, §Send§ or

Save Entry §OK§ will be lost.

The illustration:

w ¢ Ð ¢ Date/Time

means:

An example of the display in idle status is

shown on page 1.

Press the key to display the

main menu.

Use the control key q to

scroll through submenu

Settings and press §OK§.

Menu guidance

Your telephone's functions are accessed

using a menu that has a number of levels.

Date/Time Scroll to the function with the

control key q and press §OK§.

Other types of illustrations:

c / Q / * etc.

Press the matching key on the

handset.

Main menu (first menu level)

¤ When the handset is in idle status,

press w to open the main menu.

The main menu functions are shown in

the display as a list with colour icons and

names.

Enter digits or letters.

You will find detailed examples of menu

entries and multiple line input in the

appendix to this user guide, page 64.

To access a function, i.e. to open the cor-

responding submenu (next menu level):

¤ Navigate to the function using the con-

trol key q. Press the display key §OK§.

ECO DECT

Correcting incorrect entries

You can correct incorrect characters in the

text by navigating to the incorrect entry

using the control key. You can then:

u press X to delete the character to the

left of the cursor

u insert characters to the left of the cur-

sor

u overwrite the character (flashing)

when entering the time and date etc.

ECO DECT

ECO DECT reduces power consumption by

using a power supply with low power con-

sumption and also reduces the transmis-

sion power of the base station.

You can set this manually with your hand-

set. It can be used by several handsets at

the same time.

Your handset also reduces the transmis-

sion power depending on the distance to

the base station.

Activating/deactivating eco mode:

v ¢Ð ¢Base ¢Add. Features

¢Eco Mode

§OK§

Press the display key

‰

(

= activated).

When eco mode is activated, the ½ icon is

displayed at the top of the screen.

Please note:

–

Activating eco mode reduces the range of

the base station.

–

Eco mode and any repeater support (see

page 58) cancel each other out, i.e. both

functions cannot be used at the same time.

If external handsets (GAP) and handsets

from earlier Gigaset versions are used, your

handset will not automatically reduce the

transmission power to the base station.

–

Menu tree

Instead of scrolling to locate a menu function, you can select a function more quickly by

opening the menu and keying in a digit combination (or shortcut).

Example: w N 2 2 ꢀ for "Set ringer tone for external calls".

With the telephone in idle status, press w (open main menu):

SMS

You have activated a SMS mailbox (general or private) without a PIN

1-1

1-2

1-3

New SMS

(page 30)

(page 28)

Incoming 0

Outgoing 0

You have activated a SMS mailbox with a PIN or 2-3 mailboxes

1-1

Mailbox

1-1-1

1-1-2

1-1-3

New SMS

(page 28)

(page 30)

(page 28)

Incoming 0

Outgoing 0

New SMS

1-2

1-4

Mailbox 1

Mailbox 2

Mailbox 3

1-2-1

1-4-1

1-2-2

1-4-2

Incoming 0

Outgoing 0

(page 30)

(page 28)

1-2-3

1-4-3

1-5

1-6

SMS Service

Settings

(page 33)

1-6-1

Service Centres

SMS Mailboxes

Notify Number

Notify Type

(page 33)

(page 32)

(page 28)

1-6-2

1-6-3

1-6-4

1-6-6

Subscribe to SMS

Sel. Services ê

Calls List

(page 25)

Add. Features

Room Monitor

Walky-Talky

4-3

4-4

4-5

(page 46)

(page 47)

4-5-2

Data Transfer

Bluetooth

directory

Please note:

You can also send the complete directory via

data transfer, without opening the directory:

You can copy numbers to the directory

that are displayed in a list, e.g. the call his-

tory or the last number redial list, in a SMS

or during a call to the directory.

w ¢í ¢Data Transfer ¢Directory

Please note:

If you have CNIP, the first 16 characters of

the transmitted name are copied to the

Name line.

u Entries with identical numbers are not

overwritten on the receiving handset.

A number is displayed:

u The transfer is cancelled if the phone

rings or if the memory of the receiving

handset is full.

§Options§ ¢Copy to Directory

¤ Complete the entry, see page 20.

Gigaset SL375: The message playback is

interrupted during the number transfer

from the answer machine list.

Using the directory and lists

Reminder call on an anniversary

A reminder call is signalled on the handset

using the selected ringer tone.

Copying a number or e-mail address

from the directory

In many operating situations, you can

open the directory to copy a number or

e-mail address, for example. Your handset

need not be in idle status.

You now have the following options:

SMS

Write a SMS.

§OFF§

Press the display key to

acknowledge and end the

reminder call.

¤ Depending on the operating situation,

open the directory with s or Ò

or ¨ Directory.

Viewing missed anniversaries

Select an entry (page 21).

In idle status, you are reminded of an

elapsed and unacknowledged anniversary

by the one-off display of §Appoint.§.

Saving an anniversary in the directory

For each number in the directory, you can

save an anniversary and specify a time at

which a reminder call should be made on

the anniversary (delivery status: Annivers.:

Off).

¤ View appointment:

§Appoint.§

Press the display key.

You now have the following options:

SMS

Write a SMS.

Anniversaries are automatically recorded

in the calendar (page 54).

§Delete§

Delete reminder.

After deleting, press the ” or

§Go Back§ display key:

s ¢s (select entry; page 21)

Back to idle status, §Appoint.§ is

no longer displayed.

§View§ §Edit§ Press display keys one after the

other.

You can also view missed anniversaries

afterwards (see page 55).

Scroll to the Annivers.: line.

Select On.

¤ Change multiple line input:

Last number redial list

Anniversary (Date)

Enter day/month/year in 8-digit format.

The last number redial list contains the

twenty numbers last dialled with the

handset (max. 32 digits). If one of the

numbers is in the directory or in the call-

by-call list, the corresponding name will

be displayed.

Annivers. (Time)

Enter the hour/minute for the reminder

call in 4-digit format.

Annivers. (Signal)

Select the type of signal for the

¤ ^rS^ea^mveⁱⁿc^dh^ea^rn^.ges: (page 65).

Manual last number redial

Press the key briefly.

Deactivating anniversaries

Select entry.

s ¢s (select entry; page 21)

Press the talk key again.

The number is dialled.

§View§ §Edit§ Press display keys one after the

other.

When a name is displayed, you can display

the corresponding phone number by

pressing the §View§ display key.

§Save§

Scroll to the Annivers.: line.

Select Off.

Press the display key.

Using the directory and lists

An advisory tone sounds as soon as a new

message arrives in a list. The message key

f flashes (it goes off when the key is

pressed). In idle status, the display shows

an icon for the new message:

Managing entries in the last number

redial list

Press the key briefly.

Select entry.

§Options§

Open menu.

Icon

New message...

The following functions can be selected

... in the answer machine list

(Gigaset SL375 only) or on the

network mailbox

with q:

Copy to Directory

... in the call history

... in SMS list

Copy an entry to the directory

(page 20).

Automatic Redial

The selected number is automatically

dialled at fixed intervals (at least every

20 seconds). The handsfree key flashes

and "open listening" is activated.

The number of new entries is shown

beneath the corresponding icon.

List selection

If you press the message key f, only

the lists that contain messages are shown

(exception: network mailbox). Lists with

new messages are identified in bold:

– Party answers: press the talk key

c. The function is ended.

– Party does not answer: the call is ter-

minated after approx. 30 seconds.

The function is ended after pressing

any key or after ten unsuccessful

attempts.

Messages & Calls

Mailboxes:

(2)

SMS:

(1)

Calls List:

(4)

Display Number (as in the directory,

page 21)

Delete Entry (as in the directory, page 21)

”

Delete List (as in the directory, page 21)

Select a list with q. To open, press w

or OK.

Opening lists with the

message key

If only one list contains entries, no list

selection is offered and the relevant list is

displayed immediately.

You can use the message key f to open

the following list selection:

Incoming SMS message list

u SMS list

All received SMS messages are saved in

the incoming message list, page 30.

If several mailboxes are set up

(page 32), several lists are displayed.

u Answer machine list (Gigaset SL375

only) or Network mailbox, if your net-

work provider supports this function

and the network mailbox is set for fast

access (page 42).

u Call history

Using the directory and lists

u Type of entry:

Call history

‰

– accepted calls (

)

Precondition: Calling Line Identification

(CLIP, page 17)

– missed calls

– calls recorded by the answer

Depending on the type of list set, the call

history contains

machine (Ã, Gigaset SL375 only)

Pressing the display key §Delete§ deletes the

‰

u accepted calls (

u missed calls

)

marked entry.

After pressing the display key §Options§ you

u calls recorded by the answer machine

can select more functions with q:

(Ã, Gigaset SL375 only)

Copy to Directory

Depending on the type of list set, all num-

bers of the last 30 incoming calls are

stored or only the missed calls.

Copying a displayed number to the

directory.

Delete List

You can also call up the call history via the

menu:

Delete complete list.

Information

w ¢ Calls List

Setting the call history type

See following section "Displaying CNIP

information".

When you quit the call history, all entries

are set to the status "old", i.e. the next

time you call the list up they will no longer

be shown in bold.

w ¢Ð ¢Base ¢Calls List Type

Missed Calls / All Calls

‰

Select and press §OK§ ( = on).

Press and hold (idle status).

Answer machine list

(Gigaset SL375 only)

The call history entries are retained when

you change the list type.

You can use the answer machine list to

listen to the messages that are on the

answer machine.

List entry

New messages are on top.

Example of list entries:

Displaying CNIP information

All Calls

Susi Sorglos

If you have CNIP, you can display the name

and town that is registered with your net-

work provider for this number.

29/11/07

12:20

‰

Louise Miller

29.11.07

You have selected a list entry.

11:15

§Options§

Open menu.

Delete

Options

Information Select and press §OK§.

If the name and town are not shown, it

means that the caller has not requested

Calling Line Identification or that Calling

Line Identification has been withheld.

u List type (in header)

u Status of entry

Bold: new entry

u Number or name of caller

Press §OK§ to return to the list.

You can add the caller's number to the

directory (page 22).

u Date and time of call (if set, page 9)

Making cost-effective calls

u The "without preselection" list con-

Making cost-effective calls

tains the "exception to the rule".

Example:

offers particularly low-cost call rates (call-

by-call). You can manage the numbers in

the call-by-call list.

You have entered 08 for "with preselec-

tion". Now all numbers that start with

08 will be dialled with preselection.

If, for example, you want 081 to still be

dialled without preselection, enter 081

for "without preselection".

Linking call-by-call numbers

with one number

When dialling, the first digits of the

selected numbers are compared with both

lists after the talk/handsfree key is

pressed:

You can insert the dialling code of a net-

work provider ahead of the number ("link-

ing").

u The preselection number is not pre-

Open call-by-call list.

fixed if the dialled number

Select entry (call-by-call

number).

– does not match any entries in the

two lists

– matches an entry in the "without

§Options§

Press the display key.

preselection" list

Display Number

Select and press §OK§.

u The preselection number is prefixed if

the first digits of the dialled number

match with only one entry in the list

"'with preselection".

Enter number or select

number from the directory

(page 23).

Press the talk key. Both num-

bers are dialled.

^Sw^avi¢^ngÐ^pre¢^seB^lea^cs^te^io¢^{n n}Pr^ue^mse^ble^ec^rt^sion

¢Preselect No.

Automatic network provider

preselection (Preselection)

Enter or change the preselec-

tion number (call-by-call

number).

You can specify a call-by-call number

(preselection number), which is automat-

ically placed in front of numbers when

you dial them.

Save§

Press the display key.

Press and hold (idle status).

u The "with preselection" list contains

the "rule" for dialling code numbers or

the first digits of dialling code numbers

with which you wish the preselection

number to be used.

Making cost-effective calls

Save or change entries in the

preselection lists

Each of the two lists can contain

20 entries, each with 6 digits.

Numbers may be prefixed according to the

country in the "with preselection" list.

This means e.g. that all national calls or

calls to the mobile network are automati-

cally linked to the preselection number

you have stored previously.

w ¢Ð ¢Base ¢Preselection

¢With Preselect / Without Presel.

§Edit§

Select entry.

Press the display key.

Enter or edit first digits of

number.

Save§

Press the display key.

Press and hold (idle status).

Temporarily cancelling preselection

c (press and hold) ¢§Options§

¢Aut Preselct off

Permanently deactivating preselection

¤ Delete the preselection number

(page 26).

SMS (text messages)

Please note:

SMS (text messages)

u If your phone is connected to a PABX,

please read page 34.

Your unit is supplied ready for sending

SMS messages immediately.

u To receive SMS messages you must be

registered with your service provider.

Preconditions:

u Calling Line Identification is enabled for

Registering with the registration

wizard

your phone line.

u Your network provider supports SMS in

the fixed network (information on this

can be obtained from your network

provider).

The first time you press the §SMS§ display

key you will be asked whether you wish to

SMS centres (see page 33). Confirm with

§Yes§ or refuse with §No§ to abort automatic

registration. You can now receive SMS

messages from all SMS centres whose

numbers you have entered.

u You are registered with your service

provider to send and receive SMS.

SMS messages are exchanged between

SMS centres operated by service provid-

ers. You must enter the SMS centre

through which you wish to send and

receive SMS messages into your phone.

You can receive SMS messages from every

SMS centre that is entered, provided you

have registered with your service provider.

You can call up automatic registration

thereafter via the menu:

w ¢î ¢Settings

¢Subscribe to SMS

The registration wizard does not support

setting up personal mailboxes (page 32).

Your SMS messages are sent via the

Service Centr. that is shown as the active

send service centre . However, you can

activate any other SMS centre as the active

send service centre to send a current mes-

sage (page 33).

Writing/sending a SMS

^Ww^riti¢^{ng a}î^SMS

If no SMS Service Centre is entered,

the SMS menu only contains the entry

Settings . Enter a SMS Service Centre

(page 33).

Mailbox 2 Select mailbox if necessary

and press §OK§.

Enter mailbox PIN if necessary

and press §OK§.

Information on writing a SMS can be

found in the appendix:

New SMS Select and press §OK§.

Write a SMS.

u For how to enter text, see page 65.

u Writing using the predictive text tool

Please note:

EATONI, see page 65.

–

Instructions on entering text can be found

on page 65, and on writing with EATONI

predictive text on page 65.

Rules

u a SMS can be up to 612 characters.

u If there are more than 160 characters,

the SMS is sent as a linked SMS (up to

4 messages with 153 characters each).

–

EATONI is activated as a default setting.

Activating/deactivating EATONI page 66.

Sending a SMS

or:

Press the talk key

§Options§

Press the display key.

SMS (text messages)

Opening the draft message list

Send

SMS

Select and press §OK§.

w ¢î ¢(mailbox, mailbox PIN)

¢Outgoing (3)

~ / s / C

Select number with area code

The first list entry is displayed, e.g.:

(even if you are in that area)

from the directory or call-by-

call list, or enter number

directly. For SMS to a SMS

mailbox: add the mailbox ID to

the end of the number.

1234567890

21.11.07 09:45

Reading or deleting individual SMS

messages

¤ Open the draft message list and then:

Send

Press the display key. The SMS

is sent.

Select SMS.

§Read§

Press the display key.

Please note:

The entry will be displayed.

Scroll line by line using q.

–

If you are interrupted by an external call

while writing a SMS, the text is automati-

cally saved in the draft message list.

If the memory is full, or if the SMS function

on the base station is being used by

another handset, the operation is can-

celled. An appropriate message appears in

the display. Delete SMS messages you no

longer require or send the SMS later.

Or delete the SMS with

Options Delete Entry OK§.

–

Writing/changing a SMS

¤ You are reading a SMS in the draft mes-

sage list.

§Options§

Open menu.

Setting input language

You have the following options:

¤ You are writing a SMS (page 28).

New SMS

§Options§

Press the display key.

Write a new SMS and then send

(page 28) or save it.

Select Language

Select and press §OK§.

Edit

Select input language and

press §OK§.

Edit the text of the saved SMS and then

send (page 28).

Press the end call key briefly

twice to return to the text

panel.

Character Set

Text is shown in the selected character

set.

The input language setting only applies to

the current SMS.

Deleting draft message list

¤ Open the draft message list and then:

§Options§

Open menu.

Draft message list

Delete all Select, press §OK§ and confirm

You can save a SMS in the draft message

list and edit and send it later.

with §Yes§. The list is cleared.

Press and hold (idle status).

Saving a SMS in the draft message list

¤ You are writing a SMS (page 28).

§Options§

Press the display key.

Save Entry Select and press §OK§.

SMS (text messages)

Sending SMS messages to an e-mail

address

Receiving a SMS

All received SMS messages are saved in

the incoming message list. Linked SMS

messages are displayed as one message.

If this is too long or is not transferred com-

pletely, it is split into individual messages.

Since a SMS remains in the list even after

it has been read, you should regularly

delete SMS messages from the list.

If your service provider supports the SMS

as e-mail feature, you can also send your

SMS messages to e-mail addresses.

The e-mail address must be at the begin-

ning of the text. You must send the SMS to

the e-mail service of your SMS send cen-

tre.

w ¢î ¢(mailbox, mailbox PIN)

The display tells you if the SMS memory is

full.

¢New SMS

Œ / ~

¤ Deleting SMS messages you no longer

Load the e-mail address from

the directory or enter it

directly. End the entry with a

space or colon (depending on

the service provider).

require (page 31).

Incoming message list

The incoming message list contains:

u All received SMS messages, starting

Enter the SMS text.

Press the display key.

Select and press §OK§.

with the most recent.

§Options§

Send

u SMS messages that could not be sent

due to an error.

E-mail

Select and press §OK§. If the

number of the e-mail service is

not entered (page 33), enter

the number of the e-mail serv-

ice.

New SMS messages are signalled on all

Gigaset SL37H handsets by the À icon in

the display, the flashing message key f

and an advisory tone.

Opening the incoming message list with

Send

Press the display key.

the f key

Press.

Sending SMS messages as a fax

Select mailbox if necessary and enter mail-

box PIN.

You can also send a SMS to a fax machine.

Precondition: Your network provider sup-

ports this feature.

The incoming message list is displayed as

follows (example):

¤ You are writing a SMS (page 28).

SMS:

(2)

§Options§

Send

Fax

Press the display key.

Select and press §OK§.

1 bold: number of new entries

regular: number of read entries

2 Name of mailbox, here: general mailbox

s / ~ Select number from the direc-

tory or enter directly. Enter the

number with dialling code

(even if you are in the same

area).

Open list with §OK§.

An entry in the list is displayed e.g. as fol-

lows:

1234567890

21.11.05 09:45

Send

Press the display key.

SMS (text messages)

Opening the incoming message list via the

Adding a number to the directory

^Sw^MS¢^meî^nu¢(mailbox, mailbox PIN)

Adding the sender's number

¤ Open incoming message list and select

¢Incoming (2)

entry (page 30).

Reading or deleting individual SMS

messages

§Options§

Press the display key. For fur-

ther information, see page 22.

¤ Open the incoming message list.

¤ Continue as described in "Reading or

deleting individual SMS messages",

page 29.

Please note:

–

You can create a special directory for SMS

messages within your main directory by

putting a star (*) before the names.

An attached mailbox identifier is added to

the directory.

After you have read a new SMS, it is given

the status "Old" (is no longer shown in

bold).

–

Copying/dialling numbers from a SMS text

Deleting the incoming message list

All new and old SMS messages in the list

are deleted.

¤ Read SMS (page 31) and scroll to the

telephone number.

The digits are reverse-highlighted.

¤ Open the incoming message list.

Press the display key. For fur-

ther information, see page 22.

§Options§

Open menu.

¤ To continue, see "Deleting draft mes-

Or:

sage list", page 29.

Press the talk key to dial the

number.

Replying to or forwarding SMS

messages

If you wish to use the number to send a

SMS:

¤ Read the SMS (page 31):

¤ Save the number with the local area

§Options§

Press the display key.

code (dialling code) in the directory.

You have the following options:

Changing the character set

¤ Read the SMS (page 31):

Write and send a reply SMS directly

(page 28).

§Options§

Press the display key.

Character Set

Edit

Text is shown in the selected character

set.

Edit the text in the SMS and then send

it (page 28).

Forwarding a SMS

Notification by SMS

¤ You are reading a SMS (page 31):

§Options§

Press the display key.

You can have yourself notified about

missed calls or new answer machine mes-

sages (Gigaset SL375 only).

Forward

Select and press §OK§. For fur-

ther information, see page 28.

Precondition: For missed calls, the caller's

number (CLI) must have been transmit-

ted.

Notification is sent to your mobile phone

or another phone with SMS functionality.

SMS (text messages)

You only need to set the phone number to

which notification should be sent (notifi-

cation number) and the notification type.

u You can only use personal mailboxes if

your service provider supports this

function. You can tell whether this is

the case by the addition of a star (*) to

the number of a (preset) SMS centre.

^Sw^tori¢^{ng t}î^he¢^notiS^fe^ictt^ain^tig^osⁿ¢^numN^bo^etif^ry Number

u If you have forgotten your mailbox PIN,

you can reset it by restoring the base

station's default settings. This will

delete all SMS messages from all

mailboxes.

Enter the number to which the

SMS should be sent.

Save

Press the display key.

Press and hold (idle status).

Setting up and changing a personal

mailbox

Warning:

Do not enter your own fixed network number

for the notification of missed calls. This can

lead to chargeable endless looping.

Setting up a personal mailbox

w ¢î ¢Settings ¢SMS Mailboxes

Setting the notification type

Select a mailbox, e.g. Mailbox 2

w ¢î ¢Settings ¢Notify Type

and press §OK§.

¤ Change multiple line input if necessary:

¤ Change multiple line input:

Missed Calls:

On/Off:

Set On if you require SMS notification.

Activate or deactivate mailbox.

Ans Machine:

(Gigaset SL375 only)

¤ ^SS^eav^te^Onch^ifan^yog^ues^re(p^qa^ug^ire^e6^S5^M).^{S notification.}

ID:

Select mailbox ID (0–9). You can only

select the available numbers.

Protection:

Activate/deactivate PIN protection.

SMS mailboxes

¤ S^Ifaⁿv^ee^cc^eh^sa^san^rg^ye^,s^e(ⁿp^teag^re^4-6^d5^ig).^{it PIN.}

The General Mailbox is the default set-

ting. Anyone can access this mailbox and

it cannot be protected by a PIN. You can

additionally set up three personal mail-

boxes and protect these with a PIN. Each

mailbox is identified by a name and a

"Mailbox ID" (a kind of extension number).

‰

Active mailboxes are marked with

the mailbox list. They are shown in the

SMS list and can, if necessary, be displayed

by pressing the message key f.

Deactivating a mailbox

Please note:

¤ Set On/Off: to Off. Confirm message with

§Yes§ if necessary.

u If you operate a number of devices

(base stations) with SMS functionality

on a single phone line, then each SMS

mailbox ID may only occur once. In this

case you must also change the preset

ID of the general mailbox ("0").

All SMS messages saved in this mailbox

will be deleted.

Deactivating PIN protection

¤ Set Protection: to Off.

The mailbox PIN is reset to "0000".

SMS (text messages)

SMS:

Changing the name of a mailbox

Press the display key §Edit§. Enter the

number of the SMS service and insert a

star if your service provider supports

personal mailboxes.

w ¢î ¢Settings ¢SMS Mailboxes

¢s (select mailbox)

§Edit§

Press the display key.

Enter new name.

E-mail:

§Save§

Press the display key.

Press and hold (idle status).

Press the display key §Edit§. Enter the

¤ Sⁿa^uv^me^bc^eh^ra^on^fg^te^hs^e(p^ea^-mge^ai6^l5^se).^rvice.

Changing a mailbox's PIN and ID

Please note:

w ¢î ¢Settings ¢SMS Mailboxes

Ask your service provider for details on how to

enter service numbers if you wish to use per-

sonal mailboxes (precondition: your service

provider supports this function).

¢s (select mailbox)

Enter mailbox PIN if necessary

und press §OK§.

¤ Set ID:, Protection: and PIN (page 32).

Sending a SMS to a personal mailbox

Sending a SMS through another

SMS centre

¤ Activate the SMS centre (2 to 4) as

To send a SMS to a personal mailbox, the

sender must know your ID and enter it

after your number.

¤ S^ace^tn^ivd^eth^seeⁿS^dM^sS^e.^{rvice centre.}

¤ You can send your SMS contact a SMS

This setting only applies to the next SMS

to be sent. Thereafter, the setting returns

to Service Centr. 1.

via your personal mailbox.

Your SMS contact will receive your SMS

number with current ID and can save it in

their directory. If the ID is invalid, the SMS

will not be delivered.

SMS info services

You can have your service provider send

you certain information (e.g. weather

forecasts or lottery numbers) via SMS.

A total of up to 10 info services can be

stored. You can obtain information about

the info services available and their costs

from your service provider.

Setting SMS centres

Entering/changing SMS centres

¤ You should find out about the services

and special functions offered by your

service provider before you make a

new application and/or before you

delete pre-configured call numbers.

Setting up/ordering an info service

^Ow^rde¢^ringî^an¢^infS^oM^sS^erS^ve^icrv^eice

w ¢î ¢Settings ¢Service Centres

Select info service.

Select SMS centre (e.g. Service

Centr. 1) and press §OK§.

§Send

Press the display key.

¤ Change multiple line input:

Setting up an info service

Active Send:

¤ Select an empty entry, delete before-

Select Yes if SMS messages are to be

sent via the SMS centre. For the SMS

centres 2 to 4, the setting only applies

to the next SMS.

hand if necessary. Then:

§Edit§

Press the display key.

SMS (text messages)

If necessary, enter code, desig-

nation and destination

number.

Activating/deactivating the

SMS function

§Save§

Press the display key.

If you deactivate the SMS function, you

cannot send or receive any SMS messages

with your phone.

Editing the entry of an info service

¤ Select the info service (see above).

The settings which you have made for

sending and receiving SMS messages

(e.g. the call numbers of the SMS centres)

and the entries in the incoming and draft

message lists are saved even after you

switch off your phone.

Then:

§Options§

Edit Entry

Opening menu.

Select and press §OK§.

If necessary, change the code,

designation, or destination

number.

Open menu.

§Save§

Press the display key.

N 5 O 2 L

Enter the digits.

Deleting an info service

Q §OK§ Deactivate SMS function.

¤ Select the info service (see above).

Or:

Then:

ꢀ §OK§

Activate SMS function (default

setting).

Options§

Open menu.

Delete Entry Select and press §OK§.

SMS on a PABX

u You can only receive a SMS when the

Calling Line Identification is for-

warded to the extension of the PABX

(CLIP). The CLIP of the phone number

for the SMS centre is evaluated in your

Gigaset.

u If required, you must prefix the number

for the SMS centre with the access code

(depending on your PABX).

If in doubt, test your PABX, e.g. by

sending a SMS to your own number,

once with and once without the access

code.

u When you send SMS messages, your

sender number may be sent without

your extension number. In this case the

recipient cannot reply to you directly.

Sending and receiving SMS messages on

ISDN PABXs is only possible via the MSN

number assigned to your base station.

SMS (text messages)

SMS troubleshooting

The message is played back.

1. The "display call number" service is not acti-

vated.

Error codes when sending

E0 Calling Line Identification permanently

withheld (CLIR) or Calling Line

Ask your service provider to activate this

function (chargeable).

Identification not activated.

2. Your mobile phone operator and your fixed

network SMS service provider have not

agreed on a co-operation.

FE Error occurred during SMS transfer.

FD Connection to SMS centre failed, see self-

help.

Obtain information from your fixed net-

work SMS service provider.

3. Your terminal is recorded by your SMS pro-

vider as having no fixed network SMS func-

tionality, i.e. you are no longer registered

with the provider.

Self-help with errors

The following table lists error situations

and possible causes and provides notes on

troubleshooting.

Start the registration wizard for auto-

matic registration (see page 28).

Obtain information from your fixed net-

work SMS service provider.

Have the device (re-)registered to

receive SMS messages.

You cannot send messages.

1. You have not requested the CLIP service

(Calling Line Identification Presentation).

Ask your service provider to enable this

service.

Messages are only received during the day.

2. SMS message transmission has been inter-

rupted (e.g. by a call).

The terminal is recorded in your SMS pro-

vider's database as having no fixed network

SMS functionality, i.e. you are no longer

registered with the provider.

Re-send the SMS.

3. Network provider does not support this fea-

ture.

Start the registration wizard for auto-

matic registration (see page 28).

Obtain information from your fixed net-

work SMS service provider.

Have the device (re-)registered to

receive SMS messages.

4. No number or an invalid number is entered

for the SMS centre set as the active send

service centre.

Enter the number (page 33).

You receive an incomplete SMS.

1. Your phone's memory is full.

Delete old SMS messages (page 31).

2. The service provider has not yet sent the

rest of the SMS.

You have stopped receiving SMS messages.

1. You have changed the ID of your mailbox.

Give your SMS contacts your new ID or

undo the change (page 33).

2. You have not activated your mailbox.

Activate your mailbox (page 33).

3. Call diversion is activated with When: All Calls

or the call diversion All Calls is activated for

the network mailbox.

Change the call diversion.

Answer machine operation (Gigaset SL375 only)

Recording a personal announcement/

announce only

Answer machine operation

(Gigaset SL375 only)

w ¢Ð ¢Voice Mail ¢Announcements

¢Record Announce / Record Anc Only

You can operate the answer machine that

is integrated in the base station via the

handset or via remote operation (other

phone/mobile phone).

§OK§

Press the display key to start

the recording.

You hear the ready tone (short tone).

¤ Now speak your announcement (at

Announcement mode

least 3 sec.).

You can use the answer machine in two

different modes.

§End§

Press the display key to end

the recording.

u In Ans. & Record mode, the caller hears

the announcement and can then leave

a message.

Cancel the recording with a or ”.

Restart the recording with §OK§.

After recording, the announcement is

played back for you to check. You can re-

record the announcement with §New§.

u In Announce Only mode, the caller hears

your announcement but cannot leave a

message.

Please note:

u Recording ends automatically if the

maximum recording time of 170 sec-

onds is exceeded or there is a break in

speech for more than 2 seconds.

Operation via the handset

The handset loudspeaker activates auto-

matically if you receive an acoustic

prompt or message while operating.

You can switch it off with the handsfree

key d.

u If you cancel the recording, the pre-

recorded announcement will be used

again.

u If the answer machine's memory is full,

Activating/deactivating the answer

machine

it will switch to Announce Only mode.

¤ Delete old messages and the answer

machine will automatically switch

back to Ans. & Record mode. Repeat

recording if required.

w ¢Ð ¢ Voice Mail ¢Ans Machine

‰

(

= on)

When you switch the answer machine on,

the remaining memory time is

announced. If the time has not yet been

set (page 9), an appropriate announce-

ment is made. The × icon appears in the

display.

^Pw^lay¢^ingÐ^ba¢^ckV^aoⁿicⁿe^oM^uaⁿil^c¢^emA^enⁿn^to^suncements

¢Play Announce / Play Anc Only

If you have not recorded a personal

announcement, the relevant pre-recorded

announcement is played.

The phone is supplied with pre-recorded

announcements for answer and record

mode and for announce only mode. If a

personal announcement has not been

recorded, the relevant pre-recorded

announcement is used.

Answer machine operation (Gigaset SL375 only)

Record a new announcement while play-

ing back announcement:

Setting "answer and record" or "announce

only" by toggling

§New§

Press the display key.

You can use the Ans Mode Time setting to

change over the announcement mode for

a specific period.

u If the answer machine's memory is full,

it will switch to Announce Only mode.

¤ Delete old messages and the answer

machine will automatically switch

back to Ans. & Record mode. Repeat

recording if required.

Example: Ans. & Record mode is set. If you

activate Ans Mode Time and set a period

(e.g. 18.00 to 08.00) the answer machine

switches to Announce Only mode for this

period. Outside this period (08.01 to

17.59), Ans. & Record mode is active.

Deleting announcements/announce

^ow^nly¢Ð ¢ Voice Mail

w ¢Ð ¢Voice Mail ¢Announcements

¢Set Ans. Mode ¢Ans Mode Time

‰

(

= on)

¢Announcements

¤ Change multiple line input:

¢Del Announce/Del Anc Only

From:

§Yes§

Press the display key to con-

firm the prompt.

Enter hours/minutes for the start of the

period in 4-digit format.

Press and hold (idle status).

Until:

Once you have deleted your announce-

ment, the relevant pre-recorded

Enter hours/minutes for the end of the

period in 4-digit format.

announcement will be used again.

Activation:

¤ ^SSa^ev^lee^cc^th^Oaⁿn^og^re^Os^fw^f.ith §Save§.

Selecting announcement mode

You can choose between Ans. & Record and

Announce Only.

If the memory for messages is full and

Activation: On has been selected, saving is

interrupted and you will receive an

instruction to delete old messages.

w ¢Ð ¢ Voice Mail

¢Announcements ¢Set Ans. Mode

‰

¢Ans. & Record / Announce Only ( = on)

¤ Delete old messages and repeat the

Press and hold (idle status).

setting.

The selected mode is saved even after the

answer machine is deactivated.

As soon as you change the announcement

mode (page 37), the Ans Mode Time func-

tion is automatically deactivated.

If the memory for messages is full in Ans.

& Record mode, the answer machine will

switch to the Announce Only mode and you

will receive an instruction to delete old

messages.

Playing back messages

The date and time of each message is

logged (provided this has been set,

¤ Delete old messages.

page 9) and displayed during the play-

back. If Calling Line Identification is acti-

vated, the caller's number or name is dis-

played. If the caller's number is stored in

the directory, their name is displayed.

The answer machine automatically

switches back to the set mode once dele-

tion is complete. You can then reselect the

required recording mode.

Answer machine operation (Gigaset SL375 only)

Playing back new messages

Marking a message as "new"

New messages that have not yet been

heard are indicated by the Ã icon in the

display and by the f key flashing on

the handset.

A previously played back "old" message is

displayed as a "new" message again.

During message playback:

Press the star key.

Press the message key.

An announcement informs you of the

message's new status.

Ans M.:

Select and press §OK§.

An announcement informs you if there are

new or old messages.

Or:

§Options§

Open menu.

If there are new messages, playback then

begins with the first new message. After

the last new message you will hear the

end tone and an announcement about

how much recording time remains.

Mark as New

Select and press §OK§.

Playback of the current message is can-

celled. Playback of next message starts, if

applicable.

If the message has been saved with the

date and time you will hear an appropriate

announcement before playback begins.

The f key on the handset flashes.

Adding the telephone number of a

message to the directory

Playing back old messages

See "Copying a displayed number to the

directory", page 22.

You can listen to old messages if there are

no more new messages. Begin playback as

described under "Listening to new mes-

sages".

Deleting messages

After the entry time and date have been

played back (after approx. 3 seconds) a

new message assumes the status "old".

You can delete old messages either all

together or individually.

Deleting all old messages

During playback or pause:

Stopping and controlling playback

During message playback:

§Options§

Press the display key.

Del All Old Msgs

Select and press §OK§.

Pause playback. Press 2

again to resume.

t or ꢀ

§Yes§

Press the display key to con-

firm the prompt.

Skip to the start of the current

message.

Press twice: skip back to the

previous message.

Deleting individual old messages

During playback or pause:

s or 3

§Delete§

Press the display key.

Go to the next message.

Press twice: skip to the next

but one message.

Picking up a call from the answer

machine

If playback is interrupted for over a

minute, the answer machine returns to

idle status.

You can pick up a call while the answer

machine is recording it or is being oper-

ated via remote operation:

Reading CNIP information of a message

¤ Please read page 25.

c / §Accept§

Press the talk or display key.

Answer machine operation (Gigaset SL375 only)

Recording stops and you can speak to the

caller.

The maximum recording time depends on

the available memory of the answer

machine. If the memory is full you will

hear an end tone, the recording is

aborted, and the call recorded up to that

point is listed in the answer machine list as

a new message. If the answer machine

was in Ans. & Record mode, it will switch to

the Announce Only mode. You will receive

an instruction to delete old messages.

If 2 seconds of the call have already been

recorded when you pick it up, the call will

be displayed as a new message. The f

key on the handset flashes.

You can accept the call even if it is not sig-

nalled on the handset.

Diverting an external call to the answer

machine

¤ Delete old messages.

The answer machine automatically

switches back to the set mode once

deletion is complete.

You can divert an incoming external call to

the answer machine even if it is switched

off.

Precondition: Sufficient storage space is

available on the answer machine.

Activating/deactivating

call screening

An external call is signalled on the hand-

set:

During recording of a message you can lis-

ten in via the loudspeaker of registered

handsets.

Press the display key.

The answer machine starts immediately in

recording mode and records the call. The

set time for the call acceptance (page 40)

is ignored.

Permanently activating/deactivating

call screening

w ¢Ð ¢Voice Mail ¢Call Screening

Activating/deactivating two-way

recording

‰

¢Handset ( = on)

Press and hold (idle status).

You can record an external call with the

answer machine.

You can switch off the Call Screening func-

tion on the handset during the recording.

¤ Inform the caller that the call is being

recorded.

Switching off call screening for the

current recording

§Options§

Open menu.

Two Way Record

Select and press §OK§.

Press the end call key.

The two-way recording is indicated on the

display by an advisory text and is added to

the answer machine list as a new mes-

sage.

Setting up the answer machine

The answer machine has already been

preset at the factory. Make individual set-

tings using the handset.

§End§

Press the display key to stop

the two-way recording.

Answer machine operation (Gigaset SL375 only)

Call acceptance/charge saving

function for remote operation

Resetting fast access for the

answer machine using key 1

You can set when you want the answer

machine to accept a call.

By factory default, the integrated answer

machine is set for fast access. However, if

you have set the network mailbox for fast

access (page 42), you can reset this set-

The options are: 0 sec., after 10 sec., 18 sec.

or 30 sec. and the cost-saving setting

Automatic.

^tw^ing.¢Ð ¢Voice Mail ¢Set Key 1

In Automatic mode, the following applies

for call acceptance:

Answer Machine / Network Mailb.

u If there are no new messages, the

answer machine accepts a call after

18 seconds.

Select and press §OK§.

Press and hold (idle status).

u If new messages are present, the

answer machine accepts a call after

10 seconds.

After you have selected the network mail-

box or the answer machine, press and

hold key ꢀ. You will be connected

directly.

When operating remotely you can tell

after approx. 15 seconds that there are no

new messages (otherwise the answer

machine would already have accepted

your call). There will be no call charges if

you hang up now.

The setting for fast access applies to all

Gigaset SL37H handsets.

Operating when on the move

(remote control)

w ¢Ð ¢Voice Mail ¢Ring Delay

Select 0 sec. / 10 sec. / 18 sec. /

30 sec. / Automatic.

You can check or activate the answer

machine from any other telephone

(e.g. hotel, pay phone) or initiate ringback

from the answer machine with a SMS.

§Save§

Press the display key.

Press and hold (idle status).

Preconditions:

Setting the recording time

u You have set a system PIN other than

You can set the maximum recording time

of a message. The options are: 1, 2, 3 mins

or Maximum.

0000 (page 58).

u The phone you are using for remote

operation has touch tone dialling

w ¢Ð ¢Voice Mail ¢Message Length

(DTMF), i.e. you hear different tones

when you press the keys. Alternatively,

you can use a code transmitter (availa-

ble from your mobile phone retailer).

Select recording time.

Press the display key.

§Save§

Setting the recording quality

Set the quality you require for your record-

ings. The options are: Standard, High, Excel-

lent. If the quality is higher, the maximum

recording time is reduced.

w ¢Ð ¢Voice Mail ¢Record Quality

Select the recording quality.

Press the display key.

§Save§

Answer machine operation (Gigaset SL375 only)

Calling the answer machine and

playing back messages

Initiating ringback from the answer

machine with SMS and listening to

messages

Dial your own number.

Precondition: You must have stored a

notification number (see page 32).

9 ~

When you hear your

announcement, press 9 and

enter the system PIN.

You can use the telephone (mobile phone

or any other device with SMS functional-

ity) for which you have stored the notifica-

tion number in your phone to send a SMS

to your answer machine when you are

away from home. It will then call you back.

The message playback begins when you

accept the call and press any key.

You will be informed whether any new

messages have been recorded. The mes-

sages are now played back. You can now

operate the answer machine with the

keypad.

Operating the answer machine via the

keypad

The following keys are used for operation:

The SMS must contain the following:

*<System PIN>*<Ringback number>*

The ringback number is optional.

Examples:

Skip to the start of the current

message.

Press twice: skip back to the

previous message.

*4711* or *4711*089123456*

If a ringback number is entered, it is

dialled; otherwise the notification number

is dialled.

Stop playback. Press again to

resume.

Go to the next message.

Mark message as "new".

Delete current message.

You can now operate the answer machine

via the keypad, as described in the previ-

ous sections.

Activating the answer machine

¤ Phone home and let the phone ring

until you hear: "Please enter PIN".

Enter system PIN.

Your answer machine is activated. It tells

you how much memory time is left.

The messages are now played back.

The answer machine cannot be deacti-

vated remotely.

Using the network mailbox

Calling the network mailbox

Using the network mailbox

ꢀ

Press and hold. You are con-

nected straight to the network

mailbox.

The network mailbox is your network pro-

vider's answer machine within the net-

work. You cannot use the network mail-

box unless you have requested it from

your network provider.

Press handsfree key d if

required. You will hear the net-

work mailbox announcement.

Viewing the network mailbox

report

Configuring fast access for

the network mailbox

When a message is recorded, you receive

a call from the network mailbox. If you

have requested Calling Line Identification,

the network mailbox number will be dis-

played. If you take the call, the new mes-

sages are played back. If you do not take

the call, the network mailbox number will

be saved in the missed calls list and the

message key flashes (page 24).

With fast access, you can dial the network

mailbox or the integrated answer machine

(Gigaset SL375 only) directly.

Gigaset SL370: Fast access is set for the

network mailbox. You only need to enter

the number of the network mailbox.

Gigaset SL375: The integrated answer

machine is set for fast access. Instead of

using this, you can specify the network

mailbox, such as the T-NetBox provided by

T-Com. Ask your network provider about

this.

Configuring fast access for the network

mailbox and entering the network mailbox

number

w ¢Ð ¢Voice Mail ¢Set Key 1

Network Mailb.

‰

Select and press §OK§ ( = on).

Enter the number for the net-

work mailbox.

§Save§

Press the display key.

Press and hold (idle status).

The setting for fast access applies to all

Gigaset SL37H handsets.

Using several handsets

On the base station

Using several handsets

Press and hold the registration/paging key

on the base station (page 1) (approx.

3 sec.).

Registering handsets

You can register up to six handsets to your

base station.

De-registering handsets

You can de-register any other registered

handset from any registered

Gigaset SL37H handset.

A Gigaset SL37H handset can be regis-

tered to up to four base stations.

Open list of internal parties.

The handset you are currently

using is indicated by < .

Manually registering the

Gigaset SL37H to Gigaset SL370/

SL375

Select the internal party you

wish to de-register.

You must initiate handset registration on

the handset and on the base station.

§Options§

Open menu.

Once it has been registered, the handset

returns to idle status. The internal number

of the handset appears in the display,

e.g. INT 1. If it does not, repeat the proce-

dure.

De-reg. H/Set No.

Select and press §OK§.

Enter the current system PIN

and press §OK§.

§Yes§

Press the display key.

On the handset

w ¢Ð ¢Handset ¢Register H/Set

Locating a handset ("paging")

Select base station, e.g. Base 1

and press §OK§.

You can locate your handset using the

base station.

Enter the system PIN of the

base station (the default is

0000) and press §OK§. The fol-

lowing flashes in the display,

e.g. Base 1.

¤ Briefly press the registration/paging

¤ ^kA^ell^yh^oaⁿnd^thse^et^bs^aw^seill^sr^ti^an^tg^iosⁿim^(pu^alt^ga^ene¹o^).usly

("paging"), even if the ringer tones are

switched off.

On the base station

Within 60 sec. press and hold the registra-

tion/paging key on the base station

(page 1) (approx. 3 sec.).

Ending paging

¤ Briefly press the registration/paging

key on the base station or press the talk

key c on the handset.

Registering other handsets

You can register other Gigaset handsets

and handsets for other devices with GAP

functionality as follows.

Changing the base station

If your handset is registered to more than

one base station, you can set it to a partic-

ular base station or to the base station

^tw^hat¢^hasÐ^th¢^{e be}H^sa^tn^rd^es^ce^et^p¢^tioSⁿe⁽le^Bc^et^sB^ta^Bs^ae^se).

On the handset

¤ Start to register the handset as

described in its user guide.

Using several handsets

Select one of the registered

When transferring a call you can also press

the end call key a before the internal

participant answers.

base stations or Best Base and

press §OK§.

Then, if the internal participant does not

answer or the line is busy, the call will

automatically return to you (the display

will show Recall).

Making internal calls

Internal calls to other handsets registered

on the same base station are free.

Internal consultation/conference calls

Calling a specific handset

When you are speaking to an external

participant, you can call an internal par-

ticipant at the same time for consultation

or hold a conference call between all

3 participants.

Initiate internal call.

Enter the number of the hand-

set.

Or:

Initiate internal call.

Select handset.

You are conducting an external call.

Open list of handsets.

The external participant hears

hold music if activated (see

page 58).

Press the talk key.

Calling all handsets ("group call")

Initiate internal call.

Select handset and press §OK§.

You are connected with the

internal participant.

Press the star key. All handsets

are called.

Either:

Ending a call

§End§

Press the display key.

Press the end call key.

You are reconnected with the

external participant.

Transferring a call to another handset

Or:

You can transfer an external call to

another handset (connect).

§Conference§ Press the display key.

All 3 participants are con-

nected with each other.

Open list of handsets.

The external participant hears

hold music if activated (see

page 58).

Ending a conference call

Press the end call key.

If an internal participant presses the end

call key a, the other handset remains

connected to the external participant.

Select a handset or Call All and

press §OK§.

When the internal participant answers:

¤ If necessary announce the external call.

Accepting/rejecting call waiting

Press the end call key.

If you receive an external call during an

internal call, you will hear the call waiting

tone (short tone). The caller's number or

name will appear in the display if Calling

Line Identification is enabled.

The external call is transferred to the other

handset.

If the internal participant does not answer

or the line is busy, press the display key

§End§, to return to the external call.

Using several handsets

All participants hear a signal tone.

Ending an internal call, accepting an

external call

If the first internal participant presses the

end call key a, the handset that has "lis-

tened in" remains connected to the exter-

nal participant.

§Accept§

Press the display key.

The internal call is ended. You are con-

nected to the external caller.

Rejecting the external call

Changing the name of a handset

§Reject§

Press the display key.

The names "INT 1", "INT 2" etc. are

assigned automatically at registration.

You can change these names. The name

must be no more than 10 characters. The

changed name is displayed in every hand-

set's list.

The call waiting tone is turned off.

You remain connected with the internal

participant. The ringer tone can still be

heard on other registered handsets.

Listening in to an external call

Open list of handsets. Your

own handset is indicated by <.

Precondition: The Listening In function

must be activated.

§Edit§

Select handset.

Press the display key.

Enter name.

You are conducting an external call. An

internal participant can listen in on this

call and take part in the conversation. All

the participants are made aware of the

"listening in" by a signal tone.

§Save§

Press the display key.

Changing a handset's internal

number

Activating/deactivating internal

^lw^iste¢ⁿⁱⁿÐ^g-i¢ⁿBase ¢Add. Features

A handset is automatically assigned the

lowest free number on registration. If all

slots are occupied, number 6 is overwrit-

ten if this handset is in idle status. You can

change the internal number of all regis-

tered handsets (1–6).

¢Listening In

Press §OK§ to switch the function on or off

‰

(

= on).

Press and hold (idle status).

Open list of handsets. Your

own handset is indicated by <.

Internal listening-in

Options

Open menu.

The line is engaged with an external call.

Your screen will display information to

that effect You want to listen in to the

external call.

Edit H/Set No.

Select and press §OK§. The list of

handsets is displayed.

Press and hold the talk key.

The current number flashes.

Select a handset.

You are linked into the call. All participants

hear a signal tone. During this time, this

handset displays the Conference message

and it is not possible to dial another

number from this handset.

Enter the new internal number

(1–6). The handset's old

number is overwritten.

§Save§

Press the display key to save

the input.

Ending listening in

Press and hold (idle status).

Press the end call key.

Using several handsets

You will hear the error tone (descending

tone sequence) if you assign an internal

number twice.

Caution!

–

You should always check the operation

of the room monitor before use. For

example, test its sensitivity. Check the

connection if you are diverting the room

monitor to an outside number.

¤ Repeat the procedure with a free

number.

–

When the function is switched on the hand-

set's operating time is severely reduced.

If necessary, place the handset in the

charging cradle. This ensures that the bat-

teries do not run down.

Using a handset as a

room monitor

If the room monitor is activated, a previ-

ously stored destination number is called

as soon as a set noise level is reached. You

can store an internal or external number

in your handset as the destination

number.

–

Ideally the handset should be positioned 1

to 2 metres away from the baby. The micro-

phone must be directed towards the baby.

The connection to which the room monitor

is diverted must not be blocked by an acti-

vated answer machine.

The room monitor call to an external

number stops after around 90 seconds.

The room monitor call to an internal

number (handset) stops after approx.

3 minutes (depending on the base sta-

tion). While the room monitor is activated,

all keys are locked except the end call key.

The handset's speaker is muted.

Activating the room monitor and

entering the number to be called

v ¢í ¢Room Monitor

¤ Change multiple line input:

Room M.:

Select On to activate.

Call to:

When the room monitor is activated,

incoming calls to the handset are indi-

cated without a ringer tone and are only

shown on the screen. The display and key-

pad are not illuminated and advisory

tones are also turned off.

External number:

Select the number from the directory

(press display key Ò) or enter it

directly. Only the last 4 digits are dis-

played.

Internal number:

If you accept an incoming call, the room

monitor mode is suspended for the dura-

tion of the call, but the function remains

activated.

§Options§

INT

§OK§ ¢ s (select

handset or Call All if all registered hand-

^{sets are to be called)}¢ §OK§.

Level:

If you deactivate then reactivate the hand-

set, the room monitor mode remains acti-

vated.

¤ ^SPr^ee^tsⁿs^o§S^isa^eve^l§^et^vo^es^la^sv^eeⁿt^sh^ite^ivs^ite^ytt⁽i^Ln^og^ws.^{or High).}

Using several handsets

In walky-talky mode, if you press the talk

key c or the handsfree key d, the call

will go to all handsets that are in walky-

talky mode. The connection is made with

the first handset to accept the walky-talky

call.

Changing the set destination number

v ¢ í ¢ Room Monitor

Scroll to the Call to: line.

X or §Delete§

Delete existing number.

¤ Enter and save number as described in

"Activating the room monitor and

entering the number to be called"

(page 46).

Please note:

u The maximum range outdoors is

300 m.

u Handsets that are in walky-talky mode

are not available for phone calls.

Deactivating the room monitor

remotely

u The handset operating times are

greatly curtailed.

Preconditions: The phone must support

touch tone dialling and the room monitor

should be set for an external destination

number.

Activating/deactivating walky-talky

mode

¤ Accept the call from the room monitor

v ¢í ¢Walky-Talky

and press keys 9 ;.

Use §OK§ to activate walky-talky mode.

The room monitor function will deactivate

after the call ends. There will be no further

room monitor calls. The other room moni-

tor settings (e.g. no ringer tone) on the

handset will remain activated until you

press the display key §OFF§ on the handset.

You can now:

§OFF§

Press the display key. Walky-

talky mode is switched off.

Press the display key to open

the menu.

To reactivate the room function with the

same phone number:

The following functions can be selected

with q:

¤ Turn on the activation again and save

with §Save§ (page 46).

Audio Settings

You can set Ringer Settings (see

page 51) and Advisory Tones (see

page 52) for walky-talky mode.

Walky-talky mode

Room Monitor

Walky-talky mode allows two handsets to

communicate with each other, both inside

and outside the range of the base station

to which the handsets are registered.

You can use the handset in walky-talky

mode as a room monitor.

Using a handset in walky-talky mode

Handsets that are to communicate with

each other using walky-talky mode must

meet one of the following conditions:

^a¨^{s a roo}¢^{m m}Ro^ooⁿm^itoM^ronitor

u The handsets are all registered to the

¤ Change multiple line input:

same base station.

Room M.:

u The handsets are set to Best Base or are

Select On to activate.

not yet registered.

Level:

¤ ^SS^eav^te^noch^isa^en^lg^ee^ves^l(^sp^eaⁿg^se^it6^iv5^it)^y. ^{(Low or High).}

Handset settings

The room monitor will use all the handsets

that are in walky-talky mode.

Room Monitor

Assign key to the menu for setting

and activating the room monitor (see

page 46).

Switch the room monitor off by pressing

the display key §OFF§ on the handset that

was used to activate the room monitor.

The handset reverts to normal walky-talky

mode.

Alarm Clock

Assign key to the menu for setting

and activating the alarm clock (see

page 53).

Calendar

Handset settings

Open calendar/enter new appoint-

ment.

Your handset is preconfigured, but you

can change these settings to suit your

individual requirements.

Bluetooth

Assign the Bluetooth menu to a key.

More Features...

More features are available:

Shortcuts for functions and

numbers

INT

Internal calls (see page 44).

SMS

You can assign the left display key and

each of the digit keys Q and 2 to

O a number or a function. The right dis-

play key has a function pre-selected by

default. You can change the assigned

function.

Assign the menu for SMS functions

to a key (see page 28).

SMS Service

Assign key with the menu for order-

ing info services (page 33).

SMS Notific.

The number is then dialled or the function

started by simply pressing a key.

Assign key with the menu for acti-

vating SMS notification (page 31).

Assigning a digit key/left display key

If the left display key has been assigned a

shortcut, the selected function or name of

the phone number in the directory or call-

by-call list is displayed (abbreviated if nec-

essary) in the bottom display line via the

display key.

Precondition: The digit key or the left dis-

play key has not yet been assigned a

number or a function.

¤ Press the display key } or press

and hold the digit key.

The list of possible key assignments is

opened. The following can be selected:

Starting the function, dialling the

number

Quick Dial / Call-by-Call

If the handset is in idle status, press and

hold the digit key or press the display key

briefly.

Assign key to a number from the direc-

tory or call-by-call list.

The directory or call-by-call list is

opened.

Depending on the key assignment:

u Numbers are dialled directly.

u The function menu is opened.

¤ Select an entry and press §OK§.

If you delete or edit an entry in the

directory or call-by-call list, this has no

effect on the assignment to the digit/

display key.

Handset settings

Select a colour scheme and

Changing key assignments

Display key

‰

press §OK§ ( = current col-

our).

Press briefly.

¤ Press and hold the left or right display

key.

Contrast

Select and press §OK§.

Select contrast.

The list of possible key assignments is

opened.

§Save§

Press the display key.

Press and hold (idle status).

¤ Proceed as is described when first

assigning the key with a shortcut

(page 48).

Setting the screensaver

Digit key

¤ Press the digit key briefly.

You can set a picture from the Resource

Dir. (page 52) to be displayed as a screen-

saver when the handset is in idle status.

This will replace the idle status display. It

may conceal the date, time and name.

§Change

Press the display key. The list

of possible key assignments is

displayed.

¤ Proceed as is described when first

assigning the key with a shortcut

(page 48).

The screensaver is not displayed in certain

situations, e.g. during a call or if the hand-

set is de-registered.

If a screensaver is activated, the Screen

Changing the display language

‰

Saver menu option is marked with

w ¢Ð ¢Display ¢Screen Saver

The current setting is displayed.

¤ Change multiple line input:

Activation:

You can view the display texts in different

languages.

w ¢Ð ¢Handset ¢Language

‰

The current language is indicated by

Select a language and press

§OK§.

Select On (screensaver is displayed) or

Off (no screensaver).

Press and hold (idle status).

Selection:

If required, change the screensaver

If you accidentally choose a language you

do not understand:

¤ ⁽S^sa^ev^ee^bc^eh^la^on^wg⁾e^.s: (page 65).

w N 4ꢀ

If the screensaver conceals the display,

briefly press a or w to show the idle

display with time and date.

Press keys in sequence.

Select the correct language

and press §OK§.

Changing the screensaver

Setting the display

w ¢Ð ¢Display ¢Screen Saver

Scroll to the Selection line.

You have a choice of four colour schemes

and several different contrasts.

§View§

Press the display key. The

active screensaver is dis-

played.

w ¢Ð ¢Display

Colour Scheme

Select screensaver and press

§Change§.

Select and press §OK§.

¤ Save changes: (page 65).

Handset settings

§Save§

Scroll to the Speaker: line.

Setting the display backlight

Set the speaker volume.

Regardless of whether or not the handset

is in the charging cradle, you can activate

or deactivate the backlighting. If the base

station is switched on, the display is per-

manently dimmed.

Press display key if necessary

to save the setting.

Setting the volume during a call:

Press the control key.

Set the volume.

w ¢Ð ¢Display ¢Backlight

The current setting is displayed.

¤ Change multiple line input:

The setting will automatically be saved

after approx. 3 seconds or press the dis-

play key §Save§.

In Charger

If t is assigned with another function:

Select On or Off.

§Options§

Open menu.

Without Charger

Select On or Off.

Volume

Select and press §OK§.

Configure setting (see above).

Please note:

With the On setting, the standby time of the

handset can be significantly reduced.

Please note:

You can also set the call volume, the ringer

tones, advisory tones and the silent alert via

the menu (see page 14).

§Save§

Press the display key.

Press and hold (idle status).

Changing ringer tones

Activating/deactivating

auto answer

u Volume:

You can choose between five volumes

(1–5; e.g. volume 2 = ˆ)

and the "Crescendo" ring (6; volume

increases with each ring =

If you activate this function, when you

receive a call you can simply lift the hand-

set out of the charging cradle without hav-

ing to press the talk key c.

‰).

u Ringer tones:

w ¢Ð ¢Handset

You can select various ringer tones,

melodies or any sound from My stuff

(page 52).

Auto Answer

‰

Select and press §OK§ ( = on).

Press and hold (idle status).

You can set different ringer tones for the

following functions:

Changing the handsfree/

earpiece volume

u Ext. Calls: for external calls

u Internal Calls : for internal calls

u Appointments: for set appointments

You can set the loudspeaker volume for

handsfree talking to five different levels

and the earpiece volume to three different

levels.

(page 54)

u All: the same ringer tone for all func-

tions

In idle status:

t ¢Handset Volume

Set the earpiece volume.

Handset settings

Settings for individual functions

Activating/deactivating the ringer tone

Set the volume and melody depending on

the type of signalling required. You can

activate the time control for external calls

to regulate the volume of a call (e.g. qui-

eter at night-time than in daytime).

You can deactivate the ringer tone on your

handset before you answer a call or when

the handset is in idle status; the ringer

tone can be deactivated permanently or

just for the current call. The ringer tone

cannot be reactivated while an external

call is in progress.

In idle status:

t ¢Ringer Settings

Deactivating the ringer tone permanently

Select setting, e.g. Ext. Calls

and press §OK§.

Press and hold the star key.

§Save§

Set volume (1–6).

Scroll to the next line.

Select melody.

The Ú icon appears in the display when in

idle status.

Reactivating the ringer tone

Press the display key to save

the setting.

Press and hold the star key.

Deactivating the ringer tone for the current

call

Additionally for external calls:

Press display key.

§Time C.§

§Silence§

Press the display key.

¤ Change multiple line input:

Time control :

Activating/deactivating the alert tone

Select On or Off.

In place of the ringer tone you can activate

an alert tone. When you get a call, you will

hear a short tone ("Beep") instead of the

ringer tone.

From:

Enter the start of the period in 4-digit

format.

Until:

Press and hold the star key

and within 3 seconds:

Enter the end of the period in 4-digit

format.

§Beep§§

Press the display key. A call will

now be signalled by one short

alert tone. You will now see

Volume:

Set the volume (1–6).

in the display.

Same ringer tone for all functions

Silent alert

In idle status:

t ¢Ringer Settings ¢All

Incoming calls and other messages are

indicated by vibration.

¤ Set volume and ringer tone (see "Set-

tings for individual functions").

In idle status:

§Save§

Press the display key to con-

firm the prompt.

t ¢Silent Alert

Activate or deactivate with §OK§

Press and hold (idle status).

‰

(

= activated).

Please note:

You can also set the call volume, the ringer

tones, advisory tones and the silent alert via

the menu (see page 14).

Please note:

You can also set the call volume, the ringer

tones, advisory tones and the silent alert via

the menu (see page 14).

Handset settings

Press and hold (idle status).

My stuff

If you have saved a picture in an invalid

data format, you will see an error message

after selecting the entry. Cancel the oper-

ation with Î. Delete the picture

with §Delete§.

My stuff on the handset manages sounds,

which you can use as ringer tones, and

pictures (CLIP pictures and screensavers),

which you can use as caller pictures or as

screensavers. Precondition: Calling Line

Identification (CLIP). My stuff can manage

the following media types:

Sounds: setting the volume

During playback:

Volume

Press the display key.

Set volume.

Icon

Sound

Format

Standard

.mid

Ringer tones

Monophonic

Polyphonic

Save

Press the display key.

Renaming/deleting a picture

Picture

(CLIP picture, screen-

saver)

BMP

(128 x 128

128 x 64

pixels)

You have selected an entry.

Options§

Open menu.

If a picture cannot be deleted (è), these

options are not available. Depending on

the situation, you can select the following

functions:

The icon is displayed in front of the name

in My stuff. Various mono- and polyphonic

sounds and pictures are preconfigured on

your handset.

Delete Entry

The selected entry is deleted.

You can listen to the available sounds and

view the pictures.

Delete List

All entries in the list that can be deleted

are deleted.

You can download pictures from a PC

(page 66). If there is not enough memory

available, you must first delete one or

more pictures. The pre-configured pic-

tures are labelled with è. You cannot

rename or delete them.

Rename

Change the name (max. 16 characters)

and press §Save§. The entry is stored with

the new name.

Checking the memory

Playing back sounds/viewing CLIP

pictures

You can check how much memory is avail-

^aw^ble¢^forÏ^scre¢^ensC^aa^vp^ea^rc^sit^ay^{nd CLIP pictures.}

w ¢Ï ¢Screensavers / Caller

Pictures / Sounds (select entry)

”

Back: press the display key.

§Play§ / View Press the display key. Sounds

are played back or pictures are

displayed. Press the q key to

switch between entries.

Activating/deactivating

advisory tones

§End§ / ” Press the display key. Playback

of the sound or the display of

the picture ends.

Your handset uses "advisory tones" to tell

you about different activities and statuses.

The following advisory tones can be acti-

vated and deactivated independently of

each other:

While you are playing back

sounds, you can also interrupt

playback with the u key.

Handset settings

u Key click: every key press is confirmed.

u Advisory tones:

Activating/deactivating the alarm

^cw^loc¢^{k an}ì^{d setting the wake-up time}

– Confirmation tone (ascending tone

sequence): at the end of an entry/

setting and when a SMS or a new

entry arrives in the answer machine

list or call history

¤ Change multiple line input:

Activation:

Select On or Off.

Time:

– Error tone (descending tone

sequence): when you make an

incorrect entry

Enter the wake-up time in 4-digit for-

mat.

– Menu end tone: when scrolling at

Occurance:

the end of a menu

Select Daily or Monday-Friday.

u Battery low tone: the battery pack

Volume:

requires charging.

Set the volume (1–6).

In idle status:

Melody:

¤ ^SS^eav^lee^ctch^ma^en^lg^oe^ds^y:^.(page 65).

t ¢Advisory Tones

¤ Change multiple line input:

You will see the ì icon.

Key Tones:

Select On or Off.

A wake-up call with selected ringer tone

(page 50) is signalled on the handset.

The wake-up call sounds for 60 seconds.

ì is shown in the display. If no key is

pressed, the wake-up call is repeated

twice at five minute intervals and then

switched off.

Confirm.:

Select On or Off.

Battery:

Select On, Off or In Call. The battery

warning tone is only activated/deacti-

¤ ^vS^aa^tv^ee^dc^ahⁿa^dng^oeⁿs^l:^y(^sp^oa^ugⁿe^d6^s5^d)^u. ^{ring a call.}

During a call, the wake-up call is signalled

by a short tone.

You cannot deactivate the confirmation

tone for placing the handset in the base

station.

Deactivating the wake-up call/

repeating after a pause (snooze mode)

Please note:

You can also set the call volume, the ringer

tones, advisory tones and the silent alert via

the menu (see page 14).

Precondition: A wake-up call is sounding.

§OFF§

Press the display key. The

wake-up call is deactivated.

§Snooze§

Press the display key or any

key. The wake-up call is deacti-

vated and then repeated after

5 minutes. After the second

repetition the wake-up call is

deactivated completely.

Setting the alarm clock

Precondition: The date and time have

already been set (page 9).

Handset settings

An appointment reminder is signalled

with the selected ringer tone (page 50).

The appointment reminder sounds for

60 seconds. The entered text, date and

time are displayed.

Setting an appointment

(calendar)

You can have your handset remind you of

up to 30 appointments (volume and mel-

ody, see page 50).

During a call, the appointment reminder is

signalled by a short tone.

Saving an appointment

^Mw^an¢^agiç^{ng appointments}

Precondition: The date and time have

^aw^lrea¢^{dy b}ç^{een set (page 9).}

r/q Select the day in the graphical

calendar and press §OK§ or w.

(Days on which appointments

have already been saved are

highlighted in black in the cal-

endar.)

r/q Select the day in the graphical

calendar and press §OK§ or w.

(Days on which appointments

have already been saved are

highlighted in black.)

Select appointment for the

day.

The list of saved appointments for the day

is displayed. If you have already saved

30 appointments, you must first delete an

existing appointment.

§Options§

Open menu.

Back with ”§.

You have the following options:

View Entry

Select and press §OK§.

View selected appointment,

Options Open the menu for editing,

deleting and activating / deactivating.

¤ Change multiple line input:

Appoint.:

Select On or Off.

Edit Entry

Date:

Edit selected appointment.

Enter day/month/year in 8-digit format.

Delete Entry

Time:

Delete selected appointment.

Enter hours/minutes in 4-digits format.

Activate / Deactivate

Notes:

Activate / deactivate the selected

appointment.

Enter text (max. of 16 characters). The

text appears as the appointment name

in the list and will be displayed on the

screen during the appointment

reminder. If you do not enter any text,

only the date and time of the appoint-

ment are displayed.

Delete List

Delete all appointments.

Switching off or answering an

appointment reminder

Save

Press the display key.

Precondition: An appointment reminder

is sounding.

Press and hold (idle status).

‰

§§OFF§§

Press the display key to switch

off the appointment reminder.

The appointment is marked with

in the

appointments list. The list of appoint-

ments is sorted by date.

Or:

Handset settings

§SMS§

Press display key to answer the

appointment reminder with a

SMS.

Using Bluetooth devices

Your Gigaset SL37H handset can commu-

nicate wirelessly via Bluetooth™ with

other devices using this technology.

Displaying missed

appointments and anniversaries

Before you can use your Bluetooth

devices, you must first activate Bluetooth

and then register the devices to the hand-

set.

Missed appointments/anniversaries

(page 23) are displayed in the Missed

Alarms list if:

You can register 1 Bluetooth headset to

the handset. You can also register up to

5 data devices (PC, PDA) to send and

receive directory entries as vCards or

exchange data with a computer

(page 66).

u You do not accept an appointment/

anniversary.

u The appointment/anniversary was sig-

nalled during a phone call.

u The handset is deactivated at the time

In order to transfer phone numbers via

Bluetooth connections, it is essential that

area codes (international and local area

codes) are stored on the phone (see

page 57).

of the appointment/anniversary

u Automatic redial was activated at the

time of an appointment/anniversary

(page 24).

The most recent entry is at the head of the

list.

You will find a description of how to oper-

ate your Bluetooth devices in the user

guides for these devices.

If there is a new appointment/anniversary

in the list, the display shows §Appoint.§.

Pressing the display key will also open the

Missed Alarms list.

Please note:

–

You can only operate headsets on your

handset that have the headset profile.

It can take up to 5 seconds to create a con-

nection between your handset and a Blue-

tooth headset. This applies both when a call

is accepted using the headset and one is

transferred to the headset, and when a

number is dialled from the headset.

To open the list from the menu:

–

w ¢í ¢Missed Alarms

Select appointment/

anniversary.

Information about the

appointment/anniversary is

displayed. A missed appoint-

ment is displayed with the

appointment name and a

missed anniversary is

displayed with the last name

and first name. The date and

time will also be given.

Activating/deactivating Bluetooth

^mw^od¢^eí ¢Data Transfer ¢Bluetooth

¢Activation

Press §OK§ to activate or deactivate Blue-

‰

tooth mode ( = activated).

Delete

SMS

Delete appointment

Write a SMS.

In idle status, the ò icon on the handset

shows that Bluetooth mode is activated:

Press and hold (idle status).

If 10 entries are already stored in the list,

the next appointment reminder will delete

the oldest entry.

INT 1

Handset settings

Please note:

Cancel

Press the display key.

Repeat search if necessary:

Select and press §OK§.

Repeat Search

Select and press §OK§.

–

If Bluetooth is activated and accessories

(e.g. data cables page 66) are plugged into

the connection socket (page 1), Bluetooth

is automatically deactivated.

§Options

–

If a Bluetooth voice connection has

already been established, Bluetooth is

not deactivated until it is ended.

If a Bluetooth data connection has

already been established, the response

depends on the receiving device.

Editing the list of known (trusted)

devices

–

Open list

–

Bluetooth is automatically reactivated

when the accessories are removed.

If Bluetooth is deactivated and accessories

are plugged in, then Bluetooth cannot be

activated.

w ¢í ¢Data Transfer ¢Bluetooth

¢Known Devices

A corresponding icon appears next to each

device name in the list displayed:

Icon

Meaning

Registering Bluetooth devices

Bluetooth headset

Bluetooth data device

The distance between the handset in Blue-

tooth mode and the activated Bluetooth

device (headset or data device) should be

no more than 10 m.

Viewing entries

Open list ¢ s (select entry)

Please note:

§Options

Press the display key.

–

If you register a headset, any headset that is

already registered will be overwritten.

If you would like to use a headset with your

handset that is already registered to

another device (e.g. to a mobile phone),

please deactivate this connection before

you start the registration process to

Gigaset.

View Entry Select and press §OK§.

Device name and address are

–

displayed.

Back with §OK§.

De-registering a Bluetooth device

Open list ¢ s (select entry)

§Options

Press the display key.

w ¢í ¢Data Transfer ¢Bluetooth

Delete Entry Select and press §OK§.

Back: press and hold key.

¢Search Headset / Search Data Device

The search can take up to 30 seconds.

Once the device has been found, its name

will be shown on the display.

Please note:

If you de-register an activated Bluetooth

device, it may try to reconnect as an "unregis-

tered device".

§Options

Trust Device Select and press §OK§.

Enter the PIN for the Bluetooth

Press the display key.

Changing the name of a Bluetooth device

device you want to register

Open list ¢ s (select entry)

and press §OK§.

§Options

Rename

Press the display key.

Select and press §OK§.

Change name

The device is saved in the list of known

devices.

Cancelling/repeating current search

To cancel search:

Save

Press the display key

Back: Press and hold key.

Handset settings

Rejecting/accepting an unregistered

Bluetooth device

Setting your own area code

In order to transfer phone numbers

between Bluetooth connections and

phone, it is essential that your area code

(international and local area code) is

stored on the phone.

If a Bluetooth device that is not registered

in the list of known devices tries to con-

nect with the handset, you will be

prompted on the display to enter the PIN

for the Bluetooth device (bonding).

Some of these numbers are already pre-

u Reject

^sw^et.¢Ð ¢Handset ¢Area Codes

§Go Back§

u Accept

Press the display key.

Check that the (pre)set area code is cor-

rect.

Enter the PIN for the Bluetooth

device you want to accept and

press §OK§.

¤ Change multiple line input:

Select/change input field.

Navigate in the input field.

If you have accepted the device, you

can use it temporarily (i.e. as long as it

is within receiving range or until you

deactivate the handset) or save it to the

list of known devices.

If necessary, delete number:

press the display key.

Enter number.

Once the PIN has been confirmed, save

to the list of known devices:

Save

Press the display key.

Example:

– Press the display key Yes.

– Press the display key No:

Area Codes

use temporarily.

International code:

00 - 49

Changing the Bluetooth name of the

handset

Local area code:

- [ 89

]

Save

You can change the handset name used

to identify it on the display of another

Bluetooth device.

Restoring the handset to

factory settings

w ¢í ¢Data Transfer ¢Bluetooth

¢Own Device Name

Change

Press the display key

Change name

You can reset any individual settings and

changes that you have made. Entries in

the directory, the call-by-call list, the call

history, the SMS lists and the handset's

registration to the base station as well as

the content of My stuff are retained.

Save

Press the display key

Back: Press and hold key.

w ¢Ð ¢Handset ¢Reset Handset

Yes

Press the display key.

Press and hold (idle status).

Base station settings

Activating/deactivating

music on hold

Base station settings

The base station settings are carried out

using a registered Gigaset SL37H handset.

w ¢Ð ¢Base ¢Music on hold

Press §OK§ to activate or deactivate music

‰

on hold ( = on).

Protecting against unauthorised

access

Repeater support

Protect the system settings of the base sta-

tion with a PIN known only to yourself.

The system PIN must be entered when, for

example, registering/de-registering a

handset to/from the base station or when

restoring the default settings.

With a repeater you can increase the range

and reception strength of your base sta-

tion. You will need to activate repeater

mode. This will terminate any calls that

are in progress at the time.

Precondition: A repeater is registered.

Eco mode is disabled.

Changing the system PIN

w ¢Ð ¢Base ¢Add. Features

You can change the 4-digit system PIN set

on the base station (default setting: 0000)

to a 4-digit PIN known only to yourself.

¢Repeater Mode

§Yes§

Press the display key.

When repeater mode is active, the menu

Gigaset SL375: Setting a system PIN facili-

tates remote operation of the answer

machine (page 40).

‰

item is marked with

Please note:

Repeater support and eco mode (see page 12)

cancel each other out, i.e. both functions can-

not be used at the same time.

w ¢Ð ¢Base ¢System PIN

Enter the current system PIN

and press §OK§.

Enter new system PIN. For

security the PIN is shown as

Restoring the base station to

the factory settings

four stars (

****

s ~

Jump to the next line, re-enter

new system PIN and press §OK§.

When the settings are restored

u eco mode is disabled,

Press and hold (idle status).

u handsets are still registered,

u the system PIN is not reset,

Resetting the system PIN

If you have forgotten your system PIN you

can reset the base station to the original

code 0000:

u the SMS information services are not

reset.

w ¢Ð ¢Base ¢Base Reset

Disconnect the power cord from the base

station. Hold down the registration/pag-

ing key ÷ on the base station while

reconnecting the power cable to the base

station. Release the key after a time.

Enter the system PIN and press

§OK§.

§Yes§

Press the display key.

Cancel the restoring process by pressing

a or the display key §No§.

The base has now been reset and the

system PIN 0000 set.

Press and hold (idle status).

Connecting the base station to the PABX

Saving an access code

(outside line code)

Connecting the base station

to the PABX

Precondition: You may have to enter an

access code for external calls in your PABX,

e.g. "0".

The following settings are only necessary

when your PABX requires them; see the

PABX user guide.

w ¢Ð ¢Base ¢Add. Features

You cannot send or receive SMS messages

on PABXs that do not support Calling Line

Identification.

¢Access Code

Enter or change access code,

max. 3 digits.

¤ Save changes: (page 65).

Dialling modes and recall

If an access code has been saved,

u The access code is prefixed automati-

cally when you select from the follow-

ing lists: numbers of the SMS centres,

call history or answer machine list.

‰

The current setting is indicated by

Changing the dialling mode

The following dialling modes can be

selected:

u The access code must be entered when

dialling manually and when manually

entering directory, emergency/ quick

dial numbers and SMS centre numbers.

u Tone dialling (DTMF)

u Pulse dialling (DP)

u If you copy recipient's number from the

directory when sending a SMS, you

have to delete the access code.

w ¢Ð ¢Base ¢Add. Features

¢Dialling Mode

‰

Select dialling mode ( = on)

u You delete an existing access code

and press §OK§.

with X.

Press and hold (idle status).

Setting recall

w ¢Ð ¢Base ¢Add. Features

¢Recall

‰

Select recall ( = on) and

press §OK§.

Press and hold (idle status).

Connecting the base station to the PABX

Setting pauses

Switching temporarily to

tone dialling (DTMF)

Changing pause after line seizure

If your PABX still operates with pulse dial-

ling (DP), but you need touch tone dialling

(DTMF) for a connection (e.g. to listen to

the network mailbox) you must switch to

touch tone dialling for the call.

You can change the length of pause that is

inserted between pressing the talk key

c and sending the number.

Open menu.

Precondition: You are conducting a call or

have already dialled an external number.

N 5 O ꢀ L

Press keys.

Press the star key.

Enter digit for the pause

length (1 = 1 sec.; 2 = 3 sec.;

3 = 7 sec.) and press §OK§.

After the call is ended, pulse dialling is

automatically switched on again.

Changing the pause after the recall key

You can change the length of the pause if

your PABX requires this (refer to the user

guide for your PABX).

Open menu.

N 5 O ꢀ 2

Press keys.

Enter a digit for the length of

the pause (1 = 800 ms;

2 = 1600 ms; 3 = 3200 ms)

and press §OK§.

Changing a dialling pause (pause after

access code)

Precondition: You have saved an access

code (page 59).

Open menu.

N 5 O ꢀ ꢀ

Press keys.

Enter a digit for the length of

the pause (1 = 1 sec.;

2 = 2 sec.; 3 = 3 sec.;

4 = 6 sec.) and press §OK§.

To insert a dialling pause: press S for

2 seconds. A P appears in the display.

Appendix

The display is blank.

Appendix

1. The handset is not switched on.

Press and hold the end call key a.

Care

2. The battery pack is flat.

Charge/replace the battery pack

(page 7).

¤ Wipe the base station, charging cradle

and the handset with a damp cloth (do

not use solvent) or an antistatic cloth.

The keys of a handset do not respond when

pressed.

Never use a dry cloth. This can cause a

build up of static.

The keypad lock is activated.

Press and hold the hash key # (page 10).

"Base station x" flashes on the display.

Contact with liquid

1. The handset is outside the range of the base

station.

If the handset has come into contact with

liquid:

Move the handset closer to the base sta-

tion.

1. Switch off the handset and remove

2. The base station's range is reduced because

eco mode is activated.

the battery pack immediately.

Deactivate eco mode (page 12) or

reduce the distance between the hand-

set and the base station.

2. Allow the liquid to drain from the hand-

set.

3. Pat all parts dry, then place the handset

with the battery compartment open

and the keypad facing down in a dry,

warm place for at least 72 hours

(not in a microwave, oven etc.).

3. The handset has been de-registered.

4. The base station is not switched on.

Check the base station's mains adapter

(page 7).

4. Do not switch on the handset again

until it is completely dry.

Base Search flashes in the display.

When it has fully dried out, you will nor-

mally be able to use it again.

The handset is set to Best Base and no base sta-

tion is switched on or within range.

Move the handset closer to the base station.

Check the base station's mains adapter

(page 7).

Questions and answers

Handset does not ring.

If you have any questions about using

your phone, visit us at

www.siemens.com/gigasetcustomercare

at any time. The table below contains a list

of common problems and possible solu-

tions.

The ringer tone is switched off.

Activate the ringer tone (page 51).

You cannot hear a ringer/dialling tone from

the fixed network.

The phone cord supplied has not been used or

has been replaced by a new cord with the

wrong jack connections.

Registration or connection problems with a

Bluetooth headset.

Please always use the phone cord supplied

or ensure that the jack connections are cor-

rect when purchasing from a retailer

(page 7).

Reset the Bluetooth headset (see the user

guide for your headset).

Delete registration data from the handset

when de-registering the device (see

page 56).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Repeat the registration process (see

page 56).

Reset the system PIN to 0000 (page 58).

Appendix

Customer Care

Forgetting the system PIN.

Reset the system PIN to 0000 (page 58).

We offer you support that is fast and tai-

lored to your specific needs!

Call charges are not displayed.

1. Your network provider does not support this

feature.

Our Online Support on the Internet can be

reached any time from anywhere.

http://www.siemens.com/gigasetcustom-

ercare

2. There are no metering pulses.

Ask your network provider to transmit

the metering pulses.

It provides you with 24/7 support for all

our products. It also provides a list of FAQs

and answers plus user guides and current

software updates (if available for the prod-

uct) for you to download.

The other party cannot hear you.

You have pressed the u (INT) key. The hand-

set is "muted".

Switch on the microphone again (page 18).

You will also find frequently asked ques-

tions and answers in the appendix of this

user guide.

The number of the caller is not displayed

despite CLIP.

Calling Line Identification is not enabled.

The caller should ask the network provider

to release Calling Line Identification (CLI).

Service Centre

You hear an error tone when keying an input

(a descending tone sequence).

Siemens Gigasets come with a 1 year lim-

ited warranty that covers faults with the

manufacturing process or components.

Siemens will at its discretion, repair or

replace, any Gigaset supplied that is found

to have a manufacturing defect. Please

retain your proof of purchase details for

warranty purposes.

Action has failed/invalid input.

Repeat the operation.

Watch the display and refer to the user

guide if necessary.

You cannot listen to messages on the net-

work mailbox.

Your phone system is set for pulse dialling.

For fast and dependable assistance with

any warranty claims, contact our Service

Centre at http://gigaset.com.au/service-

centre or complete the enclosed warranty

card and return faulty goods to:

Set your phone system to tone dialling.

Gigaset SL375 only:

No time is specified for a message in the call

history.

Menlo Worldwide Australia

Discovery Cove Industrial Estate

Unit 18 / 1801 Botany Road

Banksmeadow NSW 2019

Date/time is not set.

Set the date/time (page 9).

The answer machine reports 'PIN is incorrect'

to the remote control.

Replacement or repair services are not

offered in countries where our product is

not sold by authorised dealers.

1. You have entered the wrong PIN

Enter the system PIN again

2. The system PIN is still set to 0000.

Change the system PIN (page 58).

The answer machine is not recording any

messages/has switched over to announce-

ment.

Its memory is full.

Delete old messages.

Play back new messages and delete.

Appendix

Bluetooth Qualified Design Identity

Base station power consumption

The Bluetooth QD ID for your Gigaset

SL37H is: B011264.

In standby mode:

Gigaset SL370: approx. 2 watt

Gigaset SL375: approx. 3 watt

Accessories

During the call:

Gigaset SL370: approx. 2 watt

Gigaset SL375: approx. 3 watt

You can purchase accessories for your

Gigaset, simply contact our Service Centre

General specifications

http://gigaset.com.au/servicecentre.

DECT standard

GAP standard

No. of channels

is supported

Specifications

is supported

60 duplex channels

Recommended battery pack

(Valid at the time of going to press)

Technology: Lithium ion (Li-Ion):

Voltage: 3.7 V

Radio frequency

range

1880–1900 MHz

Duplex method

Time multiplex,

10 ms frame length

Channel grid

Bit rate

1728 kHz

1152 kbit/s

GFSK

Capacity: 700 mAh

Type:

V30145-K1310-X250

V30145-K1310-X322

Modulation

Language code

The handset is supplied with the recom-

mended battery pack. Only the original

battery pack may be used.

32 kbit/s

Transmission

power

10 mW, average power per

channel

Range

up to 300 m outdoors,

up to 50 m indoors

Handset operating times/charging

times

Base station

The operating time of your Gigaset

depends on the capacity and the age of

the batteries and the way they are used.

(All times are maximum possible times

and apply when the display backlight is

deactivated.)

power supply

240V

Environmental

conditions in oper- +5°C to +45°C;

ation

20% to 75% humidity

Dialling mode

DTMF (touch tone dial-

ling)/DP (dial pulsing)

Standby time

Talktime

approx. 350 hours (15 days)

approx. 14 hours

Charging time

approx. 3.5 hours

Notes on the user guide

Press and hold (idle status).

¤ Press and hold the end call key until the

This section explains the meaning of cer-

tain typographical conventions that are

used in this user guide.

handset returns to idle status.

Example of multiple line input

Example of a menu input

In many situations you can change set-

tings or enter data in several lines of a dis-

play.

The steps you need to perform are shown

in abbreviated form in the user guide.

This is illustrated below using the example

of "Setting the contrast for the display".

The things you have to do are explained in

the boxes.

In this user guide icons are used to guide

you step by step through multiple line

input. This is illustrated below using the

example of "Setting the date and time".

The things you have to do are explained in

the boxes.

w ¢Ð ¢Display

¤ When the handset is in idle status,

You will see the following display (exam-

ple):

press the control key in the centre

¤ ⁽W^with⁾th^toe^oq^penc^to^hn^etr^mol^akⁱⁿey^m, s^eeⁿle^uc^.t the

Date/Time

Date:

Ð Settings line.

[15.11.2005]

Time:

¤ Press w or press the display key §OK§

to confirm the Settings function.

11:11

The Settings submenu is displayed.

Save

¤ Press on the bottom of control key q

until the Display menu function is

¤ P^sere^les^cs^tw^ed.or press the display key §OK§

Date:

Enter the day, month and year in

8-digit format.

to confirm the selection.

The second line is marked with [ ] to

show it is active.

Contrast

Select and press §OK§.

¤ Enter the date using the digit keys.

¤ Press on the bottom of control key q

until the Contrast menu function is

¤ P^sere^les^cs^tw^ed.or press the display key §OK§

Time:

¤ P^Erⁿe^ts^es^rt^hh^oe^us^rs/mikⁿe^uy^t.^{es in 4-digits format.}

to confirm the selection.

Select contrast and press w

The fourth line is marked with [ ] to show

it is active.

or press the display key §Save§.

¤ Enter the date using the digit keys.

¤ Press on the right or left of the control

¤ ^kP^ere^ys^ts^ow^seto^thr^epr^ce^osⁿs^tt^rh^ae^std^.isplay key §Save§

to confirm the selection.

Notes on the user guide

When you press and hold a key, the char-

acters of that key appear in the display and

are highlighted one after the other. When

you release the key, the highlighted char-

acter is inserted into the input field.

¤ Save the changes.

¤ Pressing the display key §Save§.

¤ Then press and hold the a key.

The handset switches to idle status.

Setting upper/lower case or digits

Press the hash key # briefly to switch

from "Abc" mode to "123" and from "123"

to "abc" and from "abc" to "Abc" (upper

case: 1st letter upper case, all others lower

case). Press the hash key # before

entering the letter.

Writing and editing text

The following rules apply when writing a

text:

u Control the cursor with

u v t s.

You can see in the display whether upper

case, lower case or digits is selected.

u Characters are inserted on the left of

the cursor.

u Press the star key

to show the table

Writing SMS (with predictive text)

of special characters.

u The first letter of the name of directory

entries is automatically capitalised, fol-

lowed by lower case letters.

EATONI predictive text helps you when

you are writing SMS messages.

Each key between Q and O is

assigned several letters and characters.

These appear in a selection line immedi-

ately under the text panel (over the dis-

play keys) as soon as you press a key. The

letter you are most likely looking for is

shown in reversed highlights and is at the

beginning of the selection line. It is copied

into the text panel.

You can call up the table of special charac-

ters when writing a SMS using the *

key. Select the required character and

insert it with §Insert§.

Writing a SMS/name

(without predictive text)

Press the relevant key several times to

enter letters/characters.

SMS

572(1)

Hello Peter, I cannot come

today. W

Standard characters

1x 2x 3x 4x 5x 6x 7x 8x 9x 10x

ꢀ

2 a

hgi

Abc

Options

1 Remaining number of characters, in brack-

ets: SMS part 1-n

2 SMS text

3 Selection line

4 EATONI is activated

5 Upper/lower case or digits

L m

1) Space

2) Line break

Additional functions via the PC interface

If this letter is the one you want, confirm it

by pressing the next key. If it does not

match the one you want, press the hash

key # briefly until the letter you are

looking for is reverse highlighted in the

display line and then transferred to the

text field.

Additional functions via the

PC interface

You can connect the handset to your com-

puter via Bluetooth (page 55) or by using

a data cable (page 75). If you want to use

the Bluetooth connection, your computer

must be equipped with a suitable dongle.

If you press and hold the hash key #

you switch from "Abc" mode to "123" and

from "123" to "abc" and from "abc" to

"Abc".

Your handset can communicate with the

computer using the "Gigaset QuickSync"

program (free download at

Activating/deactivating predictive text

Precondition: you are writing a SMS mes-

sage.

www.siemens.com/gigasetSL370).

You can

u access your handset's directory and

synchronise it with Outlook, or copy

contact details to the handset,

Options

Press the display key.

Predictive Text

‰

Select and press §OK§ ( = on).

u download CLIP pictures (.bmp) from

Press the end call key briefly

to return to the text field.

Enter the text.

the computer to the handset,

u download pictures (.bmp) for the

screensaver from the computer to the

handset.

During the transfer of data between hand-

^{set and PC, you will see}ß on the dis-

play. During this time the keypad is disa-

bled, and incoming calls will be ignored.

Please note:

–

If Bluetooth is activated and accessories

(e.g data cables page 66) are plugged into

the connection socket (page 1), Bluetooth

is automatically deactivated.

–

If a Bluetooth voice connection has

already been established, Bluetooth is

not deactivated until it is ended.

If a Bluetooth data connection has

already been established, the response

depends on the receiving device.

–

Bluetooth is automatically reactivated

when the accessories are removed.

If Bluetooth is deactivated and accessories

are plugged in, then Bluetooth cannot be

activated.

Index

Appointments

Index

activating/deactivating. . . . . . . . . . 54

deleting. . . . . . . . . . . . . . . . . . . . . 54

managing . . . . . . . . . . . . . . . . . . . 54

Area code

Accepting calls

setting own dialling code . . . . . . . . 57

Assigning a key . . . . . . . . . . . . . . . . . 48

Assigning numerical keys. . . . . . . . . . 48

Automatic

call acceptance . . . . . . . . . . . . 16, 50

last number redial . . . . . . . . . . . . . 24

network provider preselection . . . . 26

accepting a call. . . . . . . . . . . . . . . .16

Access code

for a PABX . . . . . . . . . . . . . . . . . . .59

Access protection. . . . . . . . . . . . . . . .58

Accessories . . . . . . . . . . . . . . . . . . . .63

Activating

advisory tones . . . . . . . . . . . . . . . .52

answer machine . . . . . . . . . . . . . . .36

answer machine (remote

Base station

operation) . . . . . . . . . . . . . . . .41

appointment . . . . . . . . . . . . . . . . .54

Bluetooth mode . . . . . . . . . . . . . . .55

call acceptance. . . . . . . . . . . . . . . .50

handset . . . . . . . . . . . . . . . . . . . . .10

internal listening in. . . . . . . . . . . . .45

keypad lock . . . . . . . . . . . . . . . . . .10

room monitor. . . . . . . . . . . . . . 46, 47

two-way recording . . . . . . . . . . . . .39

Advisory tones. . . . . . . . . . . . . . . 52, 53

Alarm clock . . . . . . . . . . . . . . . . . . . .53

Alert tone . . . . . . . . . . . . . . . . . . . . .51

Anniversary . . . . . . . . . . . . . . . . . . . .23

deactivating . . . . . . . . . . . . . . . . . .23

missed . . . . . . . . . . . . . . . . . . . 23, 55

saving in directory . . . . . . . . . . . . .23

Announcement (answer

changing. . . . . . . . . . . . . . . . . . . . 43

connecting . . . . . . . . . . . . . . . . . . . 7

connecting and installing . . . . . . . . . 6

connecting to PABX . . . . . . . . . . . . 59

range . . . . . . . . . . . . . . . . . . . . . . . 7

restoring factory settings . . . . . . . . 58

setting . . . . . . . . . . . . . . . . . . . . . 58

system PIN . . . . . . . . . . . . . . . . . . 58

Battery pack

charging . . . . . . . . . . . . . . . . . . . 1, 9

display . . . . . . . . . . . . . . . . . . . . 1, 9

icon . . . . . . . . . . . . . . . . . . . . . . 1, 9

inserting . . . . . . . . . . . . . . . . . . . . . 7

recommended battery pack . . . . . . 63

tone . . . . . . . . . . . . . . . . . . . . . . . 53

Beep, see Advisory tones

Best base station. . . . . . . . . . . . . . . . 43

Birthday, see Anniversary

Bluetooth

answering a call. . . . . . . . . . . . . . . 16

changing device name . . . . . . . 56, 57

de-registering devices . . . . . . . . . . 56

list of known devices . . . . . . . . . . . 56

registering devices. . . . . . . . . . . . . 56

transferring directory (vCard) . . . . . 22

Bluetooth connection

machine) . . . . . . . . . . . . . . . 36, 37

Announcement mode

(answer machine) . . . . . . . . .36, 37

Answer machine . . . . . . . . . . . . . . . .36

activating/deactivating . . . . . . . . . .36

deleting messages . . . . . . . . . . . . .38

list . . . . . . . . . . . . . . . . . . . . . .24, 25

playing back messages . . . . . . . . . .37

recording a personal announcement/

announce only . . . . . . . . . . . . .36

remote operation . . . . . . . . . . . . . .40

scrolling back . . . . . . . . . . . . . . . . .38

scrolling forward. . . . . . . . . . . . . . .38

Answer machine, see also

setting own area code . . . . . . . . . . 57

Calendar. . . . . . . . . . . . . . . . . . . . . . 54

Call

Network mailbox

Appointment . . . . . . . . . . . . . . . . . . .54

Appointment/anniversary

acceptance . . . . . . . . . . . . . . . 40, 50

accepting . . . . . . . . . . . . . . . . . . . 16

answering (Bluetooth) . . . . . . . . . . 16

duration . . . . . . . . . . . . . . . . . . . . 16

display missed . . . . . . . . . . . . . . . .55

Index

ending . . . . . . . . . . . . . . . . . . . . . .16

external . . . . . . . . . . . . . . . . . . . . .16

history . . . . . . . . . . . . . . . . . . . . . .25

internal . . . . . . . . . . . . . . . . . . . . .44

party listening in. . . . . . . . . . . . . . .45

picking up from answer machine. . .38

screening during recording . . . . . . .39

transferring (connect). . . . . . . .44, 45

two-way recording . . . . . . . . . . . . .39

Call waiting

internal call . . . . . . . . . . . . . . . . . .44

Call-by-call. . . . . . . . . . . . . . . . . . . . .20

numbers . . . . . . . . . . . . . . . . . 20, 26

Call-by-call list

key. . . . . . . . . . . . . . . . . . . . . . . . . .1

Calling

external . . . . . . . . . . . . . . . . . . . . .16

Calling Line Identification. . . . . . . . . .17

Care of the telephone . . . . . . . . . . . .61

Changing

destination number . . . . . . . . . . . .47

device name (Bluetooth) . . . . . .56, 57

dialling mode . . . . . . . . . . . . . . . . .59

display language. . . . . . . . . . . . . . .49

earpiece volume. . . . . . . . . . . . . . .50

handsfree volume. . . . . . . . . . . . . .50

internal number of a handset . . . . .45

name of a handset . . . . . . . . . . . . .45

pause time . . . . . . . . . . . . . . . . . . .60

ringer tone . . . . . . . . . . . . . . . . . . .50

system PIN . . . . . . . . . . . . . . . . . . .58

Character set . . . . . . . . . . . . . . . . 29, 31

Charge saving function (remote

operation). . . . . . . . . . . . . . . . . .40

Charge status display . . . . . . . . . . . .1, 9

CLI, CLIP . . . . . . . . . . . . . . . . . . . . . .17

CLIP picture . . . . . . . . . . . . . . 17, 20, 52

CNIP . . . . . . . . . . . . . . . . . . . . . . . . .17

Conference call (internal) . . . . . . . . . .44

Configuring the network mailbox . . . .42

Confirmation tone . . . . . . . . . . . . . . .53

Connecting, base station to PABX . . . .59

Consultation call (internal) . . . . . . . . .44

Control key . . . . . . . . . . . . . . . . . .1, 10

Correcting incorrect entries . . . . . . . .12

Customer Care. . . . . . . . . . . . . . . . . .62

Deactivating

advisory tones . . . . . . . . . . . . . . . . 52

answer machine . . . . . . . . . . . . . . 36

appointment . . . . . . . . . . . . . . . . . 54

appointment reminder. . . . . . . . . . 54

call acceptance . . . . . . . . . . . . . . . 50

handset. . . . . . . . . . . . . . . . . . . . . 10

internal listening in . . . . . . . . . . . . 45

keypad lock . . . . . . . . . . . . . . . . . . 10

preselection. . . . . . . . . . . . . . . . . . 27

room monitor . . . . . . . . . . . . . . . . 47

two-way recording. . . . . . . . . . . . . 39

Delete key. . . . . . . . . . . . . . . . . . . . . 10

Deleting

announcement for answer

machine . . . . . . . . . . . . . . . . . 37

characters . . . . . . . . . . . . . . . . . . . 12

message . . . . . . . . . . . . . . . . . . . . 38

De-registering (handset) . . . . . . . . . . 43

De-registering devices (Bluetooth) . . . 56

Destination number

(room monitor) . . . . . . . . . . 46, 47

Dialling

call-by-call list . . . . . . . . . . . . . . . . 21

directory . . . . . . . . . . . . . . . . . . . . 21

mode . . . . . . . . . . . . . . . . . . . . . . 59

quick dial. . . . . . . . . . . . . . . . . . . . 48

with quick dial . . . . . . . . . . . . . . . . 22

Dialling pause. . . . . . . . . . . . . . . . . . 60

entering . . . . . . . . . . . . . . . . . . . . . 1

Directory . . . . . . . . . . . . . . . . . . . . . 20

copying number from text . . . . . . . 22

managing entries. . . . . . . . . . . . . . 21

opening . . . . . . . . . . . . . . . . . . . . 10

order of entries . . . . . . . . . . . . . . . 21

save anniversary . . . . . . . . . . . . . . 23

saving entry . . . . . . . . . . . . . . . . . 20

sending entry/list to handset . . . . . 22

storing the sender’s number

(SMS) . . . . . . . . . . . . . . . . . . . 31

transferring a vCard (Bluetooth) . . . 22

using to enter numbers . . . . . . . . . 23

Display

backlight . . . . . . . . . . . . . . . . . . . . 50

changing display language. . . . . . . 49

contrast. . . . . . . . . . . . . . . . . . . . . 49

in idle status . . . . . . . . . . . . . . . . . 11

memory (directory/call-by-call). . . . 22

Index

memory (My stuff) . . . . . . . . . . . . .52

missed appointments/

Handset

anniversaries . . . . . . . . . . . . . .55

name (CNIP). . . . . . . . . . . . . . . . . .17

network mailbox report. . . . . . . . . .42

number (CLI/CLIP). . . . . . . . . . . . . .17

screensaver . . . . . . . . . . . . . . . . . .49

setting . . . . . . . . . . . . . . . . . . . . . .49

wrong language . . . . . . . . . . . . . . .49

Display keys. . . . . . . . . . . . . . . . . .1, 10

assigning . . . . . . . . . . . . . . . . . . . .48

DP (pulse dialling) . . . . . . . . . . . . . . .59

Draft message list (SMS). . . . . . . . . . .29

activating/deactivating. . . . . . . . . . 10

advisory tones . . . . . . . . . . . . . . . . 52

changing internal number . . . . . . . 45

changing name . . . . . . . . . . . . . . . 45

changing the number . . . . . . . . . . 45

changing to a different base

station . . . . . . . . . . . . . . . . . . 43

changing to best reception. . . . . . . 43

contact with liquid. . . . . . . . . . . . . 61

de-registering . . . . . . . . . . . . . . . . 43

display backlight . . . . . . . . . . . . . . 50

display language . . . . . . . . . . . . . . 49

earpiece volume . . . . . . . . . . . . . . 50

handsfree volume . . . . . . . . . . . . . 50

idle status . . . . . . . . . . . . . . . . . . . 11

list . . . . . . . . . . . . . . . . . . . . . . . . 10

locating. . . . . . . . . . . . . . . . . . . . . 43

muting . . . . . . . . . . . . . . . . . . . . . 18

paging . . . . . . . . . . . . . . . . . . . . . 43

registering. . . . . . . . . . . . . . . . . . . 43

registering to a different base

Earpiece mode. . . . . . . . . . . . . . . . . .18

Earpiece volume . . . . . . . . . . . . . . . .50

EATONI (predictive text) . . . . . . . . . . .65

ECO DECT . . . . . . . . . . . . . . . . . . . . .12

Eco mode . . . . . . . . . . . . . . . . . . . . .12

E-mail address . . . . . . . . . . . . . . . . . .30

Email address

copying from the directory . . . . . . .23

End call key . . . . . . . . . . . . . . . . . .1, 16

Ending, call . . . . . . . . . . . . . . . . . . . .16

Ending, see deactivate

station . . . . . . . . . . . . . . . . . . 43

restoring to factory settings . . . . . . 57

screensaver . . . . . . . . . . . . . . . . . . 49

setting . . . . . . . . . . . . . . . . . . . . . 48

setting up . . . . . . . . . . . . . . . . . . . . 7

signal strength. . . . . . . . . . . . . . . . . 7

transferring a call. . . . . . . . . . . . . . 44

using room monitor. . . . . . . . . . . . 46

using several . . . . . . . . . . . . . . . . . 43

Handset operating time

in room monitor mode. . . . . . . . . . 46

Handsfree key. . . . . . . . . . . . . . . . . . . 1

Handsfree talking . . . . . . . . . . . . . . . 18

Handsfree volume. . . . . . . . . . . . . . . 50

Hash key. . . . . . . . . . . . . . . . . . . . 1, 10

Hearing aids . . . . . . . . . . . . . . . . . . . . 4

Hold music . . . . . . . . . . . . . . . . . 18, 58

setting . . . . . . . . . . . . . . . . . . . . . 58

Entry

saving, changing (preselection). . . .27

selecting (menu) . . . . . . . . . . . . . .64

selecting from directory . . . . . . . . .21

Error tone . . . . . . . . . . . . . . . . . . . . .53

Example

menu input . . . . . . . . . . . . . . . . . .64

multiple line input . . . . . . . . . . . . .64

External call

forwarding to answer machine . . . .39

Fast access

answer machine . . . . . . . . . . . . . . .40

network mailbox. . . . . . . . . . . . . . .42

Fax (SMS) . . . . . . . . . . . . . . . . . . . . .30

Flash time . . . . . . . . . . . . . . . . . . . . .59

Icon

alarm clock . . . . . . . . . . . . . . . . . . 53

answer machine . . . . . . . . . . . . . . 36

battery pack . . . . . . . . . . . . . . . . . . 9

display . . . . . . . . . . . . . . . . . . . . . 10

for new messages . . . . . . . . . . . . . 24

keypad lock . . . . . . . . . . . . . . . . . . 10

Garanti . . . . . . . . . . . . . . . . . . . . . . .73

Group call . . . . . . . . . . . . . . . . . . . . .44

Index

new message . . . . . . . . . . . . . . . . .38

network mailbox . . . . . . . . . . . . . . 25

SMS draft message list . . . . . . . . . . 29

SMS incoming message list . . . . . . 30

SMS list . . . . . . . . . . . . . . . . . . . . . 25

Listening in to call. . . . . . . . . . . . . . . 45

Locating, handset . . . . . . . . . . . . . . . 43

Lock

new SMS . . . . . . . . . . . . . . . . . . . .30

ringer tone . . . . . . . . . . . . . . . . . . .51

Idle status (display) . . . . . . . . . . . . . .11

Idle status, returning to . . . . . . . . . . .11

Incoming message list (SMS) . . . . . . .30

Incorrect input (correction). . . . . . . . .12

Information services (SMS). . . . . . . . .33

Input language (SMS). . . . . . . . . . . . .29

Installation, base station . . . . . . . . . . .6

Internal

conference. . . . . . . . . . . . . . . . . . .44

consulting . . . . . . . . . . . . . . . . . . .44

listening in . . . . . . . . . . . . . . . . . . .45

making calls . . . . . . . . . . . . . . . . . .44

Internal call . . . . . . . . . . . . . . . . . . . .44

call waiting. . . . . . . . . . . . . . . . . . .44

activating/deactivating keypad

protection . . . . . . . . . . . . . . . . 10

Mailbox ID, see SMS

Mailboxes, see SMS

Mains adapter. . . . . . . . . . . . . . . . . . . 4

Making calls

accepting a call . . . . . . . . . . . . . . . 16

external. . . . . . . . . . . . . . . . . . . . . 16

internal . . . . . . . . . . . . . . . . . . . . . 44

Making cost-effective calls. . . . . . . . . 26

Manual last number redial. . . . . . . . . 23

Medical appliances . . . . . . . . . . . . . . . 4

Memory

Key 1 (fast access) . . . . . . . . . . . . .1, 40

Keypad lock . . . . . . . . . . . . . . . . . . . .10

Keys

call-by-call list. . . . . . . . . . . . . . . . . .1

control key . . . . . . . . . . . . . . . . .1, 10

delete key. . . . . . . . . . . . . . . . . . . .10

display keys . . . . . . . . . . . . . . . .1, 10

end call key . . . . . . . . . . . . . . . .1, 16

fast access . . . . . . . . . . . . . . . . .1, 40

handsfree key. . . . . . . . . . . . . . . . . .1

hash key. . . . . . . . . . . . . . . . . . .1, 10

message key. . . . . . . . . . . . . . . . . . .1

on/off key. . . . . . . . . . . . . . . . . . . . .1

quick dial . . . . . . . . . . . . . . . . . . . .22

recall key . . . . . . . . . . . . . . . . . . . . .1

star key . . . . . . . . . . . . . . . . . . . . . .1

talk key . . . . . . . . . . . . . . . . . . .1, 16

directory/call-by-call. . . . . . . . . . . . 22

My stuff . . . . . . . . . . . . . . . . . . . . 52

end tone . . . . . . . . . . . . . . . . . . . . 53

menu guidance . . . . . . . . . . . . . . . 11

menu input . . . . . . . . . . . . . . . . . . 64

opening . . . . . . . . . . . . . . . . . . . . 10

overview . . . . . . . . . . . . . . . . . . . . 13

Message key

open list . . . . . . . . . . . . . . . . . . . . 30

opening lists . . . . . . . . . . . . . . . . . 24

Messages . . . . . . . . . . . . . . . . . . . . . 36

deleting. . . . . . . . . . . . . . . . . . . . . 38

key . . . . . . . . . . . . . . . . . . . . . . . . . 1

marking as "new". . . . . . . . . . . . . . 38

new message icon . . . . . . . . . . . . . 38

playing back . . . . . . . . . . . . . . . . . 37

Microphone . . . . . . . . . . . . . . . . . . . . 1

Missed

Language, display . . . . . . . . . . . . . . .49

Last number redial . . . . . . . . . . . . . . .23

Linking, see SMS

Liquid . . . . . . . . . . . . . . . . . . . . . . . .61

List . . . . . . . . . . . . . . . . . . . . . . . . . .20

answer machine . . . . . . . . . . . . 24, 25

call history . . . . . . . . . . . . . . . . . . .25

call-by-call list. . . . . . . . . . . . . . . . .20

handsets . . . . . . . . . . . . . . . . . . . .10

known devices (Bluetooth) . . . . . . .56

missed calls . . . . . . . . . . . . . . . . . .25

anniversary . . . . . . . . . . . . . . . . . . 55

appointment . . . . . . . . . . . . . . . . . 55

calls . . . . . . . . . . . . . . . . . . . . . . . 25

Multiple line input. . . . . . . . . . . . . . . 64

Muting the handset. . . . . . . . . . . . . . 18

My stuff . . . . . . . . . . . . . . . . . . . . . . 52

Index

Predictive text. . . . . . . . . . . . . . . . . . 65

Preselection . . . . . . . . . . . . . . . . . . . 26

deactivating . . . . . . . . . . . . . . . . . 27

Protecting the phone against access. . 58

Pulse dialling . . . . . . . . . . . . . . . . . . 59

Name

displaying caller's name (CNIP) . . . .17

of a handset . . . . . . . . . . . . . . . . . .45

Network provider (numbers list) . . . . .20

Network provider preselection,

automatic . . . . . . . . . . . . . . . . . .26

Network services . . . . . . . . . . . . . . . .19

Notification by SMS . . . . . . . . . . . . . .31

Number

Questions and answers . . . . . . . . . . . 61

Quick dial . . . . . . . . . . . . . . . . . . 20, 48

as destination for room

Range. . . . . . . . . . . . . . . . . . . . . . . . . 7

Recall . . . . . . . . . . . . . . . . . . . . . . . . 59

Recall key . . . . . . . . . . . . . . . . . . . . . . 1

pause after . . . . . . . . . . . . . . . . . . 60

Reception booster, see Repeater

monitor . . . . . . . . . . . . . . . 46, 47

copying from a SMS text . . . . . . . . .31

copying from directory . . . . . . . . . .23

copying to directory . . . . . . . . . . . .22

displaying caller's number (CLIP) . . .17

entering with directory . . . . . . . . . .23

saving in the directory. . . . . . . . . . .20

Numbers list

Recording

two-way recording. . . . . . . . . . . . . 39

Recording quality . . . . . . . . . . . . . . . 40

Recording time . . . . . . . . . . . . . . . . . 40

Registering (handset) . . . . . . . . . . . . 43

Registering devices (Bluetooth) . . . . . 56

Registration key . . . . . . . . . . . . . . . . . 1

Reminder call . . . . . . . . . . . . . . . . . . 23

Remote operation . . . . . . . . . . . . . . . 40

Repeater. . . . . . . . . . . . . . . . . . . . . . 58

Ringer tone

network provider . . . . . . . . . . . . . .20

On/Off key. . . . . . . . . . . . . . . . . . . . . .1

Order in directory. . . . . . . . . . . . . . . .21

Outside line code. . . . . . . . . . . . . . . .59

PABX

changing. . . . . . . . . . . . . . . . . . . . 50

setting volume . . . . . . . . . . . . . . . 50

Room monitor. . . . . . . . . . . . . . . . . . 46

connecting base station . . . . . . . . .59

pauses . . . . . . . . . . . . . . . . . . . . . .60

saving access code . . . . . . . . . . . . .59

setting dialling mode . . . . . . . . . . .59

setting recall. . . . . . . . . . . . . . . . . .59

SMS . . . . . . . . . . . . . . . . . . . . . . . .34

switch to touch tone dialling . . . . . .60

Pack contents . . . . . . . . . . . . . . . . . . .6

Paging. . . . . . . . . . . . . . . . . . . . . . . .43

Paging key. . . . . . . . . . . . . . . . . . . . . .1

Pause . . . . . . . . . . . . . . . . . . . . . . . .60

PC interface. . . . . . . . . . . . . . . . . . . .66

Phone jack assignment. . . . . . . . . . . . .7

Picture

deleting . . . . . . . . . . . . . . . . . . . . .52

renaming . . . . . . . . . . . . . . . . . . . .52

PIN change

system PIN . . . . . . . . . . . . . . . . . . .58

Playing back

announcement (answer machine) . .36

message (answer machine). . . . . . .37

Power consumption . . . . . . . . . . . . . .63

Saving (access code) . . . . . . . . . . . . . 59

Screensaver . . . . . . . . . . . . . . . . . . . 49

Searching in directory . . . . . . . . . . . . 21

Sending

directory entry to handset . . . . . . . 22

Sensitivity (room monitor). . . . . . 46, 47

Service . . . . . . . . . . . . . . . . . . . . . . . 62

Setting

date . . . . . . . . . . . . . . . . . . . . . . . . 9

screensaver . . . . . . . . . . . . . . . . . . 49

time . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting up

handset. . . . . . . . . . . . . . . . . . . . . . 7

Shortcut . . . . . . . . . . . . . . . . . . . . . . 13

Signal strength . . . . . . . . . . . . . . . . . . 7

Silent alert . . . . . . . . . . . . . . . . . . . . 51

SIM card

setting own area code . . . . . . . . . . 57

Index

SMS . . . . . . . . . . . . . . . . . . . . . . . . .28

active send service centre . . . . . . . .28

changing mailbox . . . . . . . . . . . . . .33

deleting . . . . . . . . . . . . . . . . . . . . .29

draft message list . . . . . . . . . . . . . .29

forwarding . . . . . . . . . . . . . . . . . . .31

incoming message list. . . . . . . . . . .30

information services . . . . . . . . . . . .33

input language . . . . . . . . . . . . . . . .29

linked. . . . . . . . . . . . . . . . . . . . . . .28

list . . . . . . . . . . . . . . . . . . . . . . . . .25

mailbox ID . . . . . . . . . . . . . . . . . . .32

mailboxes. . . . . . . . . . . . . . . . . . . .32

notification by SMS. . . . . . . . . . . . .31

notification number . . . . . . . . . . . .32

notification type . . . . . . . . . . . . . . .32

PIN protection. . . . . . . . . . . . . . . . .32

reading . . . . . . . . . . . . . . . . . . . . .29

receiving . . . . . . . . . . . . . . . . . . . .30

registration wizard . . . . . . . . . . . . .28

replying to and forwarding . . . . . . .31

rules . . . . . . . . . . . . . . . . . . . . . . .28

saving number . . . . . . . . . . . . . . . .31

self help with error messages . . . . .35

sending as a fax . . . . . . . . . . . . . . .30

sending to a personal mailbox. . . . .33

sending to an e-mail address . . . . . .30

to a PABX . . . . . . . . . . . . . . . . . . . .34

troubleshooting . . . . . . . . . . . . . . .35

writing. . . . . . . . . . . . . . . . . . . . . .28

SMS centre

Viewing the network mailbox report . 42

VIP (directory entry) . . . . . . . . . . . . . 21

Volume

earpiece . . . . . . . . . . . . . . . . . . . . 50

earpiece volume . . . . . . . . . . . . . . 50

handset handsfree volume . . . . . . . 50

loudspeaker. . . . . . . . . . . . . . . . . . 50

ringer tone . . . . . . . . . . . . . . . . . . 50

setting . . . . . . . . . . . . . . . . . . . . . 51

Warning tone, see Advisory tones

Writing (SMS) . . . . . . . . . . . . . . . . . . 28

Writing, editing text . . . . . . . . . . . . . 65

changing number . . . . . . . . . . . . . .33

setting . . . . . . . . . . . . . . . . . . . . . .33

Snooze mode. . . . . . . . . . . . . . . . . . .53

Sound, see Ringer tone

Special functions . . . . . . . . . . . . . . . .59

Specifications . . . . . . . . . . . . . . . . . .63

Star key . . . . . . . . . . . . . . . . . . . . . . . .1

System settings . . . . . . . . . . . . . . . . .58

Talk key . . . . . . . . . . . . . . . . . . . . .1, 16

Text message, see SMS

Touch tone dialling . . . . . . . . . . . 59, 60

Troubleshooting. . . . . . . . . . . . . . . . .61

Troubleshooting (SMS) . . . . . . . . . . . .35

Unknown . . . . . . . . . . . . . . . . . . . . .17

Unknown caller . . . . . . . . . . . . . . . . .17

Warranty Card

Wall-mounting the base station

Wall-mounting the

base station

100 mm

approx. 9 mm

Data Cable USB DCA-510

For connecting your phone to the USB interface of your com-

puter.

VTech Cell Phone 91 002463 000 000 User Manual
Sylvania SCR1384 User Manual
Sony CDP XB820 User Manual
Siemens A35 User Manual
Seagate ELITE 47 ST446452W User Manual
Seagate BARRACUDA 720010 SERIAL ATA ST3250310AS User Manual
SanDisk MLC NAND User Manual
Philips CD 781 User Manual
Philips AJ260 User Manual
Panasonic KX T7636E User Manual