SGH-x426
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
Code No.: GH68-04313A
09/2003 Ver. 1.0
Intellectual Property
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software
relating thereto (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and
international treaty provisions. Intellectual Property
includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise
violate the rights secured by the Intellectual Property.
Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer,
decompile, disassemble, or otherwise attempt to create
source code from the software. No title to or ownership in
the Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with
SAMSUNG and its suppliers.
ꢀ
3
Samsung Telecommunications America
(STA), Inc.
Headquarters:
1130 E. Arapaho Road
Richardson, TX 75081
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/wireless
©2003 Samsung Telecommunications America. All rights
reserved. No reproduction in whole or in part allowed
without prior written approval. Samsung is a registered
trademark of Samsung Electronics America, Inc. and its
related entities.
4
ꢀ
Contents
Your Phone ................................................................ 6
Display ............................................................................. 9
Installing the SIM Card................................................ 14
Charging a Battery........................................................ 17
Switching the Phone On/Off ......................................... 19
Making a Call ................................................................ 20
Adjusting the Volume.................................................... 23
Answering a Call ........................................................... 23
Viewing Missed Calls .................................................... 24
Quickly Switching to Silent Mode ................................ 27
Selecting Functions and Options........................... 28
Phonebook .............................................................. 30
Storing a Number with a Name.................................... 30
Using Phonebook Entry Options .................................. 33
Searching for a Number in Phonebook......................... 34
Editing a Caller Group.................................................. 36
Speed-dialing ................................................................. 37
Checking the Memory Status ....................................... 39
Entering Text ............................................................ 40
Changing the Text Input Mode..................................... 41
Using T9 Mode............................................................... 42
Using Upper/Lower-Case Character Mode .................. 43
Using Number Mode ..................................................... 45
Using Symbol Mode....................................................... 45
Options During a Call ............................................. 47
Putting a Call on Hold................................................... 47
Mute ............................................................................... 48
Muting/Sending Key Tones........................................... 48
Sending Tones................................................................ 49
Searching for a Number in Phonebook......................... 49
Using the Message Service ........................................... 50
Accessing a Menu Function .......................................... 53
Accessing a Menu Function Using Shortcuts .............. 54
List of Menu Functions ................................................. 54
Messages................................................................. 60
Inbox (Menu 1.1)........................................................... 60
Outbox (Menu 1.2)........................................................ 61
Write New (Menu 1.3).................................................. 63
Templates (Menu 1.4)................................................... 65
Settings (Menu 1.5) ...................................................... 66
My Objects (Menu 1.6) ................................................. 67
Memory Status (Menu 1.7) .......................................... 68
Voice Mail (Menu 1.8) .................................................. 69
Broadcast (Menu 1.9) ................................................... 70
Delete All (Menu 1.10) ................................................. 71
Call Records ............................................................ 72
Missed Calls (Menu 2.1)............................................... 72
Incoming Calls (Menu 2.2)........................................... 72
Outgoing Calls (Menu 2.3) ........................................... 73
Delete All (Menu 2.4) ................................................... 73
Call Time (Menu 2.5).................................................... 74
2
ꢀ
Contents
Sound Settings......................................................... 75
Extra Tones (Menu 3.8)................................................ 78
Language (Menu 4.4).................................................... 82
Security (Menu 4.5) ...................................................... 82
Display Settings (Menu 4.6)......................................... 85
Extra Settings (Menu 4.7)............................................ 87
Short Cut (Menu 4.8).................................................... 88
Reset Settings (Menu 4.9)............................................ 89
Organizer................................................................. 90
Calendar (Menu 5.1)..................................................... 90
To Do List (Menu 5.2)................................................... 93
Time & Date (Menu 5.3)............................................... 97
Alarm (Menu 5.4).......................................................... 98
Calculator (Menu 5.5)................................................... 99
Currency Exchange (Menu 5.6) ................................. 100
Network Services .................................................. 101
Call Forwarding (Menu 6.1)....................................... 101
Call Waiting (Menu 6.2)............................................. 103
Network Selection (Menu 6.3) ................................... 103
Caller ID (Menu 6.4)................................................... 104
Contents
ꢀ
3
Funbox ................................................................... 106
Downloads (Menu 7.3)................................................ 114
Solving Problems................................................... 117
Access Codes....................................................... 120
Phone Password........................................................... 121
PIN ............................................................................... 121
PIN2 ............................................................................. 123
PUK2............................................................................ 123
Health and Safety Information............................. 124
Usage guidelines: All about performance and safety 124
Maintaining Safe Use of and Access to Your Phone.. 126
Caring for the Battery................................................. 130
Acknowledging Special Precautions and FCC ........... 132
FDA Consumer Update............................................... 133
CTIA Safety Information ............................................ 144
Owner's Record............................................................ 149
User Guide Proprietary Notice................................... 149
Standard Limited Warranty .................................. 150
Glossary................................................................. 157
Index .......................................................................162
Quick Reference Card ......................................... 167
4
ꢀ
Contents
Unpacking
Your package contains the following items:
Handset
Battery
Travel Adapter
User’s Manual
Earbud & Mic
You can purchase additional accessories at
http://www.attwireless.com/accessories or by calling
1-800-IMAGINE (1-800-462-4463). Accessories include:
• Simple hands-free kit
• Standard/slim batteries
• Cigarette lighter adapter
• Holster
Unpacking
ꢀ
5
Your Phone
Phone Layout
Earpiece
Display
Folder
Navigation (Up/
Down/Left/Right)
keys
Volume/menu
browse keys
Soft key (left)
Soft key (right)
WAP Browser
key
Dial/menu
confirmation key
Power on/off /
menu exit key
Alphanumeric
keys
Cancel/
correction key
Special
function keys
Microphone
6
ꢀ
Your Phone
Antenna
Service light
Key
Description
Menu mode: Scrolls through menus
and phonebook
Idle mode: Scrolls through your
favorite menus. See “Short Cut (Menu
4.8)” on page 88.
Menu mode: Left returns to the
previous screen; Right selects the
highlighted item
Text Entry mode: Moves the cursor.
Idle mode: Scrolls through your
favorite menus. See “Short Cut (Menu
4.8)” on page 88.
Perform functions indicated by the
text above them on the bottom line of
the display.
(soft keys)
Your Phone
ꢀ
7
Key
Description
Idle mode: Launches the web browser.
See “WAP Browser (Menu 7.2)” on
page 107.
Makes or answers a call.
Menu mode: Selects a menu function
or stores information in the phone or
SIM memory.
Idle mode: Hold down to displays the
last number called or received.
Deletes characters from the display.
Menu mode: Returns to the previous
menu.
Ends a call. Hold down to turn the
phone on or off.
Menu mode: Cancels your input and
returns to Idle mode.
Idle mode: Hold down to access your
voice mail.
Enter numbers, letters, and some
special characters.
8
ꢀ
Your Phone
Key
Description
Enter special characters and perform
various functions.
(on the side of the phone)
During a call: Adjusts earpiece
volume.
Idle mode: Adjusts keypad tone
volume.
Menu mode: Scrolls through menus
and Phonebook.
Display
The display has three areas:
Icons
Text and
graphic area
Menu
Ph.Book
Soft key
indicators
Your Phone
ꢀ
9
Area
Description
Icons
Displays various icons. See
“Icons” on page 10.
Text and
graphic area
Displays messages, instructions,
and any information entered,
such as the number you are
dialing.
Soft key
indicators
Displays functions currently
assigned to the two soft keys.
Icons
Icon Description
Indicates the received signal strength.
The greater the number of bars, the
better the signal.
Indicates you are connected to the GPRS
network
Indicates a data connection to the GPRS
network has been established.
Displays when a call is in progress.
10
ꢀ
Your Phone
Icon Description
Displays when you are out of your home
area and have logged onto a different
network (roaming).
Displays when an alarm has been set.
Displays during text entry to indicate
current entry mode. See “Entering Text”
on page 40.
Displays when a new text message has
been received.
Displays when a new voice mail message
has been received.
Displays when the phone is on Mute.
Displays when the phone is in silent
mode (red icon), or when the phone is set
to vibrate when you receive a call (blue
icon).
Indicates your battery level.
Your Phone
ꢀ
11
Backlight
The backlight illuminates the display and the keypad.
When you press a key or open the phone, the backlight
turns on. If no keys are pressed, the light turns off after a
specified time. To set the length of time the backlight is
active, see “Backlight (Menu 4.6.2)” on page 85
After one minute, the display turns off to conserve power.
Use the Auto Light menu to set your phone to use the
backlight for a specified time. See “Auto Light (Menu
4.6.3)” on page 86.
Service Light
The service light, at the top right-hand corner of the
phone, flashes when you are within a service area.
To enable or disable the service light, see “Service Light
(Menu 4.6.4)” on page 86.
Service light
12
ꢀ
Your Phone
Earbud/Microphone
The included earbud/microphone allows you to use your
phone virtually hands-free.
To answer a call using the earbud, press the button on the
earbud controller.
To open the recent calls menu, press and hold the earbud
controller button. A beep indicates the menu is ready.
To re-dial the most recent caller, press and hold the
earbud controller until you’ve heard two beeps. After the
second beep, the phone dials the most recent caller.
Your Phone
ꢀ
13
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, plus any optional
services available.
Important! The plug-in SIM card and its contacts can be
easily damaged by scratches or bending. Be
careful when handling, inserting, or
removing the card.
Keep all SIM cards out of the reach of small
children.
14
ꢀ
Getting Started
1. If necessary, switch off the phone by holding down
.
2. Remove the battery:
•Press the battery lock above the battery and hold it
toward the top of the phone as shown.
•Lift the battery away..
2
1
3. Slide the SIM card into the SIM card socket.
Getting Started
ꢀ
15
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery
which can be charged using the included adapter. Use
only approved batteries and chargers. Ask your local
Samsung dealer for further details.
You can use the phone while the battery is charging, but
this charges the battery more slowly.
Note: You must fully charge the battery before using your
phone for the first time. A discharged battery is fully
recharged in approximately 200 minutes.
1. With the battery installed, plug the connector into the
jack at the bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
Getting Started
ꢀ
17
3. When the battery is charged, unplug the adapter from
the outlet. Press the gray tabs on both sides of the
connector to disconnect the adapter from the phone.
1
3
2
Note: To avoid damaging your phone, always unplug the
adapter from the power outlet before disconnecting
the adapter from your phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and a message
repeats at regular intervals on the display. The backlight
shuts down to conserve power.
When the battery level gets too low, the phone
automatically turns off.
18
ꢀ
Getting Started
Switching the Phone On/Off
1. Press and hold
until the phone switches on.
When the phone has found the network, the idle
screen displays:
Service Provider
05:17 AM
Sat Oct 02
Menu
Ph.Book
Note: English is the default display language. To change the
language, see “Language (Menu 4.4)” on page 82.
2. To turn the phone off, press and hold
power-off image displays.
until the
Getting Started
ꢀ
19
Call Functions
Making a Call
When the idle screen displays, enter the area code and
phone number, then press
.
Note: When you activate the Auto Redial option in the
Extra Settings menu (Menu 4.7), the phone
automatically re-dials up to ten times if the person
fails to answer. See “Auto Redial” on page 87.
Making an International Call
1. Press and hold
. The + character displays.
2. Enter the country code, area code, and phone number,
then press
.
20
ꢀ
Call Functions
Correcting the Number
To clear
Press the
the last digit
displayed
.
any other digit Left or Right navigation key
to the right of the digit to be
deleted. Press
. To insert a
missing digit, press the
appropriate key.
the whole
display
Press and hold
.
Ending a Call
To end a call, briefly press
.
Redialing the Last Number
The phone stores the numbers you dialed, received, or
missed unless the caller’s number is blocked. See “Call
Records” on page 72.
Call Functions
ꢀ
21
To recall any of these numbers:
1. Press
to display the list of recent phone numbers.
2. Using the Up and Down navigation keys, scroll
through the numbers until the number you want
highlights.
3.
T
o
Press the
dial the number
edit the number
.
Edit soft key and change
the number. See
“Correcting the Number”
on page 21.
delete the number Options soft key and
select Delete
.
delete all of the
numbers
Options soft key and
select Delete All
.
Making a Call from Phonebook
You can store frequently-used phone numbers in the SIM
card or the phone’s memory, collectively called the
Phonebook. Select a name to recall the associated
number. See “Phonebook” on page 30.
22
ꢀ
Call Functions
Adjusting the Volume
To adjust the earpiece volume during a call, press the
key to increase the volume level and the key to
decrease the level as shown:
In Idle mode, use these keys to adjust the keypad tone
volume.
Answering a Call
When you receive a call, the phone rings and displays the
incoming call animation.
When the caller can be identified, the phone displays the
caller ID information. If the caller is stored in your
Phonebook, the callers name also displays.
Call Functions
ꢀ
23
1. Press
call.
or the Accept soft key to answer an incoming
If the Anykey Answer option is activated, press any
key to answer except and the Reject soft key. See
“Anykey Answer” on page 88.
If the Active Folder option is activated, calls are
answered when you open the phone. See “Open to
Answer” on page 87.
Note: To reject an incoming call, press and hold the
Volume keys on the left side before opening the
phone, or press the Reject soft key or
.
2. To end a call, close the phone or press
.
Note: You can answer a call while using the Phonebook or
menu features in the same manner.
Viewing Missed Calls
When you are unable to answer a call, you can use the
Missed Call log to retrieve the number, if available.
The number of missed calls displays on the idle screen
immediately after a call is missed.
24
ꢀ
Call Functions
To view missed calls:
1. Press the View soft key.
The number of the most recent missed call displays, if
available.
2. To
scroll through missed
Press the
Up or Down
calls
navigation key.
call the number
displayed
.
edit or delete a missed Select soft key. See
call number below.
Editing a Missed Call Phone Number
Note: When the phone number of the missed call is not
available, the Edit Number option does not display.
1. Press the Options soft key.
2. Press the Up or Down navigation key to highlight the
Edit Number option.
3. Press the Select soft key.
Call Functions
ꢀ
25
4. Change the phone number.
5. To
call the number
Press the
.
store the number Save soft key and enter
the name and location.
See “Storing a Number
with a Name” on page 30.
Deleting a Missed Call
1. Press the Options soft key.
2. Press the Up or Down navigation key to highlight the
Delete option.
3. Press the Select soft key.
Press
at any time to exit.
Note: You can access Missed Calls at any time by selecting
the Missed Calls menu (Menu 2.1). See “Missed
Calls (Menu 2.1)” on page 72.
26
ꢀ
Call Functions
Quickly Switching to Silent Mode
In silent mode, your phone vibrates instead of ringing
when you receive a call.
In Idle mode, press and hold
message and display.
until the “Silent Mode”
In Silent mode, your phone changes the sound settings as
follows:
Option
New Setting
Vibration
OFF
Alert Type (Menu 3.3
)
Keypad Tone (Menu 3.4
)
Message Tone (Menu 3.5
)
Vibration
Off
Folder Tone (Menu 3.6
)
Power Off tone
Off
Extra Tones (Menu 3.8
)
OFF
To exit silent mode and return to normal settings, press
and hold until Exit Silent Mode displays.
Call Functions
ꢀ
27
Selecting Functions and
Options
The options used to customize your phone are arranged in
menus and sub-menus, which are accessed using the two
soft keys marked
and
. Each menu and sub-menu
allows you to view and alter phone settings.
The soft keys vary according to the function you are
using. The label on the bottom information line of the
display just above each key indicates its current function.
Service Provider
05:17 AM
Sat Oct 02
Menu
Ph.Book
Press the right soft
key to access the
Phonebook feature.
Press the left soft
key to access
28
ꢀ
Selecting Functions and Options
To select a function or option:
1. Press the appropriate soft key.
2. To
Press the
select the function or
option
Select soft key or the
Right navigation key.
view the next function Down navigation key
or option
or key on the left
side of the phone.
view the previous
function or option
Up navigation key or
key on the left side
of the phone.
move back one menu
level
Left key,
or
soft key,
.
exit the menu without
saving changes
For some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key.
Note: When you access a list of options, your phone
highlights the current option. If there are only two
options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently
active.
Selecting Functions and Options
ꢀ
29
Phonebook
You can store names and phone numbers in your SIM
card or phone’s memories. They are physically separate
but are viewed as a single Phonebook.
Storing a Number with a Name
There are two ways to store a number:
• Use the Save soft key in Idle mode
• Use the New Entry option in the Phonebook menu
Storing a Number in Idle Mode
To store an number in idle mode:
1. Enter the number you want to store.
Note: If you make a mistake while entering a number,
correct it using
.
2. To save the number, press the Save soft key.
3. Select an icon that identifies the category of the
number, then press the Select soft key. Options are:
•
•
•
: Mobile phone
: Office
: Home
30
ꢀ
Phonebook
4. Enter a name and press the OK soft key.
The maximum length you can enter for a name
depends on your SIM card. See “Entering Text” on
page 40.
5. Press the right soft key, labeled To Card or To Phone
,
to switch between phone and SIM card memory.
Note: If you use a different phone, any numbers stored in
your SIM card memory are available when the
card is used on the new phone. Any numbers
stored in the old phone’s memory must be re-
entered.
6. If you do not want to save the number and name in the
suggested location, press
to clear the location.
Enter the preferred location using the number keys.
7. Press the OK soft key to store the name and number.
After saving, the phone displays the new Phonebook
entry.
8. To
use the entry options
Press the
Options soft key. See
“Using Phonebook
Entry Options” on
page 33..
return to the idle
screen
Phonebook
ꢀ
31
Storing a Number Using the Phonebook Menu
1. At the idle screen, press the Ph. Book soft key.
2. Use the Up and Down keys to highlight New Entry
and press the Select soft key.
3. Use the Left and Right navigation keys to select a
category and press the Select soft key.
Note: The E-mail icon (
) is available in this step. It allows
you to save an E-mail address in addition to a phone
number.
4. Enter a name and press the OK soft key.
Note: The maximum length you can enter for a name
depends on your SIM card. See “Entering Text” on
page 40.
5. Enter a number or address you want to store and
press the Save soft key.
6. Continue the procedure from step 5 on page 31 to
store the number.
32
ꢀ
Phonebook
Using Phonebook Entry Options
While accessing any Phonebook entry, press the Options
soft key to view the options for the entry.
To
Press the
select the
Select soft key or the Right
highlighted option navigation key.
highlight a
Up or Down navigation key
different option
until the option you want
highlights.
The following options are available:
Paste: allows you to paste the number into the normal
dialing mode. Use this option to dial a number similar to
one in Phonebook, such as a different extension in the
same office.
Use
to change the number as required. See
“Correcting the Number” on page 21.
Edit: allows you to edit the name or number.
Erase: allows you to erase the name and number. A
confirmation message displays when you select this
option. Press the Yes soft key to confirm.
Copy: allows you to copy the number to a memory and the
location number you select.
Phonebook
ꢀ
33
Caller Group: allows you to organize your Phonebook
entry in caller groups so that the phone alerts you in a
specific way when a person from one of your groups calls
you. Select one of the ten groups available.
To remove an entry from a group, select the No Group
option.
See “Editing a Caller Group” on page 36..
Add Entry: allows you to add a new number to the
selected name.
Searching for a Number in Phonebook
After storing numbers in Phonebook, you can search for
them in two ways; by name and by caller group.
Searching for a Number by Name
1. At the idle screen, press the Ph. Book soft key.
2. Press the Select soft key when Search highlights. You
are asked to enter a name.
34
ꢀ
Phonebook
3. Enter the first few letters of the name that you wish to
find. The Phonebook entries display.
4. To
Press the
view the highlighted View soft key.
entry
select a different
entry
Up or Down
navigation key until
the entry highlights.
look for a name
starting with a
different letter
key labeled with the
letter you want.
5. Press
to dial the number, or press the Options soft
key to access Phonebook entry options. See “Using
Phonebook Entry Options” on page 33.
Searching for a Number by Caller Group
1. At the Idle screen, press the Ph. Book soft key.
2. Use the Up or Down navigation key to scroll to Group
Search
.
3. Press the Select soft key. You are asked to enter a
group name.
Phonebook
ꢀ
35
4. Enter the first few letters of the group you want to
find. The caller groups display.
5. Use the Up or Down navigation key to select the group
you want, then press the View soft key. Phonebook
entries in the caller group display.
6. To
Press the
view the
highlighted entry
View soft key.
select a different Up or Down navigation
entry
key until the entry you
want highlights.
6. Press
to dial the number, or press the Options soft
key to access Phonebook entry options. See “Using
Phonebook Entry Options” on page 33.
Editing a Caller Group
1. At the Idle screen, press the Ph. Book soft key.
2. Use the Up or Down navigation key to scroll to Group
Edit and press the Select soft key.
3. Highlight the group you want using the Up or Down
navigation key and press the Options soft key.
36
ꢀ
Phonebook
4. Change settings as required. The following options are
available:
•
•
•
•
Call Ring Tone: sets the ring tone for incoming calls.
SMS Tone: sets the ring tone for new text messages.
Graphic: sets the icon displayed for incoming calls.
Group Name: assigns a name to the group.
5. When you are finished, press
or
.
Speed-dialing
Once phone numbers are stored, you can set up to eight
speed-dial entries.
Setting Up Speed-Dial Entries
1. From the idle screen, press the Ph. Book soft key.
2. Use the Up or Down navigation key to scroll to Speed
Dial and press the Select soft key.
3. Highlight key to assign the speed-dialing number,
-
, and press the OK soft key.
Note: Memory location 1 is reserved for Voice Mail.
Note: If you have already assigned a number to the key,
the Options soft key replaces the OK soft key. Go
to step 6.
Phonebook
ꢀ
37
4. Select a Phonebook entry from the list and press the
View soft key.
5. Select a number if the entry contains more than one
and press the Select soft key.
6. When the speed dial number is assigned, select from
the following options by pressing the Options soft key:
•
•
Change: allows you to a different number to the key.
Erase: clears the setting so that no number is
assigned.
•
•
Erase All: clears the settings for all keys so no
numbers are assigned to any key.
Number: Displays the number assigned to the key.
7. When you are finished, press
or
.
Speed-dialing from Phonebook
To speed-dial the numbers assigned to
and hold the appropriate key.
-
, press
38
ꢀ
Phonebook
Checking the Memory Status
You can check how many names and numbers are stored
in the Phonebook; SIM card and phone memories. You
can also see the capacity of both memories.
1. At the idle screen, press the Ph. Book soft key.
2. Select the Memory Status option.
3. Press the Up or Down navigation key to view the
number of existing and remaining entries in the card
and phone’s memory.
4. When you are finished, press
or
.
Phonebook
ꢀ
39
Entering Text
You can enter alphanumeric characters using your
phone’s keypad using one of the following text entry
modes:
• T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, when you press
once,
J, K or L displays. T9 mode automatically compares
your keystrokes with an internal linguistic dictionary
to determine the correct word, thus requiring far fewer
keystrokes than the traditional upper/lower-case
character modes.
• Upper/lower-case character modes
These modes allow you to cycle through letters by
pressing the key labeled with the letter you want to
enter up to four times until the letter displays.
• Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
• Number mode
This mode allows you to enter numbers.
40
ꢀ
Entering Text
Changing the Text Input Mode
When you are in a field that allows character entry, the
text input mode icon displays:
Text input
mode indicator
Options
918
To select
T9 mode
Press the
soft key until
displays
Upper-case
displays
character mode
Lower-case
displays
character mode
Number mode
Symbol mode
displays
displays
Entering Text
ꢀ
41
Using T9 Mode
T9 is a predictive text input mode that allows you to key
in any character using single keystrokes based on a built-
in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing
letter.
-
. Press each key only once for each
Example:To enter “Hello” in T9 mode, press
and
,
,
,
.
The word that you are typing appears on the display.
It changes with each key that you press.
2. Enter the whole word before editing or deleting your
keystrokes.
3. When the word displays correctly, go to step 4.
If not, press
, Up, or Down keys to display
alternative word choices.
Example:Both “Of” and “Me” contain
and
. The
phone displays the most commonly used choice first.
42
ꢀ
Entering Text
4. Press
word.
to add a space then start entering the next
• To type words not found in T9 mode, change the text
input mode to the upper/lower-case character input
mode.
• To enter full stops, hyphens, or apostrophes, press
T9 mode applies grammar rules to ensure that the
correct punctuation is used.
.
Example
:
is used twice to display two punctuation
marks:
L
e
t
’
s
e
a
t
.
• To shift case in T9 mode, use
. There are two cases:
Lower Case ( ) and Capital Lock ( ).
• You can move the cursor using the Left and Right
navigation keys. To delete letters, press
hold to clear the display.
. Press and
Using Upper/Lower-Case Character Mode
Use
-
to enter your text.
1. Press the key labeled with the letter you want:
•Once for the first letter
•Twice for the second letter
•Etc.
Entering Text
ꢀ
43
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter twice or
a different letter on the same key, wait a moment for
the cursor to move to the right automatically, then
select the next letter.
The following characters are available:
Characters in the Order Displayed
Key
Lower Case
Upper Case
Space
Space
• To insert a space, press
.
• Move the cursor using the Left and Right keys.
• To delete letters, press
• Press and hold to clear the display.
.
44
ꢀ
Entering Text
46
ꢀ
Entering Text
Options During a Call
Your phone provides a number of functions you can use
during a call.
Putting a Call on Hold
At any time, you can place a call on hold. You can also
make another call with a call on hold.
To place a call on hold, press the Hold soft key. Press the
Unhold soft key to return to the call.
To make a call while you have a call in progress:
1. Enter or select the phone number.
2. Press
to dial the second call. The first call is
automatically put on hold.
Or:
1. Press the Hold soft key to put the current call on hold.
2. Make the second call in the normal way.
To switch between the two calls, press the Swap soft key.
To end a held call, press
.
Options During a Call
ꢀ
47
Mute
To mute your phone so you cannot be heard:
1. Press the Options soft key.
2. Highlight the Mute option.
3. Press the OK soft key. You cannot be heard by the
caller.
To turn Mute off:
1. Press the Options soft key.
2. Highlight the Unmute option.
3. Press the OK soft key. You can again be heard by the
caller.
Muting/Sending Key Tones
If the Mute keys option are selected, your phone is silent
when keys are pressed and key tones are not sent.
Note: To communicate with answering machines or
computerised telephone systems, you must activate
the Send keys option
.
48
ꢀ
Options During a Call
Sending Tones
This option allows you to send the correct type of tones if
you need to enter a password or account number when
calling an automated system, such as a bank. To send
tones:
1. Press the Options soft key.
2. Highlight the Send Tones option.
3. Press the OK soft key.
4. Enter the required number and press the OK soft key.
Searching for a Number in Phonebook
To search for a number in the Phonebook during a call:
1. Press the Options soft key.
2. Highlight the Phonebook option.
3. Press the OK soft key. The Phonebook entries display.
4. Enter the name you want to find.
5. Press the View soft key to display the highlighted
entry.
For further details, see “Phonebook” on page 30.
Options During a Call
ꢀ
49
Using the Message Service
SMS Service allows you to read and send short text
messages. If you receive an SMS (Short Message Service)
message during a call, the Message icon ( ) displays and
the service light flashes. See “Messages” on page 60.
Call Waiting
You can answer an incoming call while you have a call in
progress (if you have set the Call Waiting menu to
Activate; see “Call Waiting (Menu 6.2)” on page 103). A
call-waiting tone plays to when you receive a second call.
To answer a call while you have a call in progress:
1. Press
or the Accept soft key to answer the incoming
call. The first call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
3. To end a call on hold, press the Options soft key and
select the End Held Call option.
To end the current call, press
.
To ignore the second call, press the Reject soft key.
50
ꢀ
Options During a Call
Making a Multi-party Call
A multi-party calls allows up to six people to take part in
a call. For further details about subscribing to this
service, contact your service provider.
Setting up the Multi-party Call
1. Call the first participant.
2. Call the second participant in the normal way. The
first call is automatically put on hold.
3. To join the first participant to the multi-party call,
press the Options soft key and select the Join option.
Press the OK soft key.
4. To add a new person to the multi-party call, call the
person, then press the Options soft key. Select the
Conference option and press the OK soft key.
You can add incoming callers by answering the call,
pressing the Options soft key, and selecting Conference
.
Options During a Call
ꢀ
51
Having a Private Conversation With One Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key.
2. Highlight a participant and press the Select soft key
or
.
3. When the Private option highlights, press the OK soft
key. You can now have a private conversation with the
person without leaving the call.
4. To return to the multi-party call, press the Options
soft key and select Conference. Press the OK soft key.
All of the multi-party call participants can now hear
each other.
Dropping One Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key.
2. Highlight a participant, then press the Select soft key
or
.
3. Select the Remove option and press the OK soft key.
The call drops the participant, but you can continue to
talk to the other participants.
4. To end the multi-party call, close your phone or press
.
52
ꢀ
Options During a Call
Using the Menus
The phone offers a range of functions to you can
customize using menu functions.
Accessing a Menu Function
1. In Idle mode, press the Menu soft key.
2. To
scroll through the
Press the
Up or Down navigation
key or use the and
keys.
menus
confirm the chosen Select soft key or the
setting
Right navigation key.
return to the
soft key or the Left
previous menu level key.
exit the menu
without changing
the settings
Using the Menus
ꢀ
53
Accessing a Menu Function Using Shortcuts
Menu items can be accessed quickly using their shortcut
numbers. The shortcut number is displayed at the bottom
right next to the soft key. To jump to a menu, press the
Menu soft key and the number of the menu you want.
Notes:The numbers assigned to each menu are indicated on
the list on the next page. These selections may not
match the menu on your phone, depending on the
services supported by your SIM card.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press
for Phone Settings
.
3. Press
for Language. The languages available
display.
List of Menu Functions
The following list shows the menus available and
indicates the shortcut number assigned to each item.
Note: If you use a SIM AT card that provides additional
services, the SIM AT menu displays when you press
the Menu soft key. For further details, see your SIM
card instructions.
54
ꢀ
Using the Menus
1. Messages (see page 60)
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 Setting 1*
*
1.5.2 Setting 2
1.5.3 Common Setting
1.6 My Objects
1.6.1 My EMS Melody
1.6.2 My EMS Picture
1.6.3 My EMS Animation
1.6.4 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
1.8 Voice Mail
1.8.1 Connect to Voice Mail
1.8.2 Voice Mail Number
1.9 Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
1.10 Delete All
*. Support dependent on network service provider.
Using the Menus
ꢀ
55
2. Call Records (see page 72)
2.1 Missed Calls
2.2 Incoming Calls
2.3 Outgoing Calls
2.4 Delete All
2.4.1 Missed Calls
2.4.2 Incoming Calls
2.4.3 Outgoing Calls
2.4.4 All Calls
2.5 Call Time
2.5.1 Last Call Time
2.5.2 Total Outgoing
2.5.3 Total Incoming
2.5.4 Life Time
2.5.5 Reset Timers
3. Sound Settings (see page 75)
3.1 Ring Tone
3.2 Ring Volume
3.3 Alert Type
3.4 Keypad Tone
3.5 Message Tone
3.5.1 SMS Tone
3.5.2 SMS-CB Tone
3.6 Folder Tone
3.7 Power On/Off
3.8 Extra Tones
56
ꢀ
Using the Menus
4. Phone Settings (see page 80)
4.1 My Settings
4.1.1 Wallpaper
4.1.2 Menu Style
4.2 Greeting Message
4.3 Own Number
4.4 Language
4.5 Security
4.5.1 PIN Check
4.5.2 Change PIN
4.5.3 Phone Lock
4.5.4 Change Password
4.5.5 FDN Mode*
4.5.6 Change PIN2*
4.6 Display Settings
4.6.1 Contrast
4.6.2 Back Light
4.6.3 Auto Light
4.6.4 Service Light
4.6.5 Graphic Logo
4.7 Extra Settings
4.8 Short Cut
4.8.1 Key Up
4.8.2 Key Down
4.8.3 Key Right
4.8.4 Key Left
4.9 Reset Settings
*. Support dependent on network service provider.
Using the Menus
ꢀ
57
5. Organizer (see page 90)
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Time Format
5.4 Alarm
5.4.1 Once Alarm
5.4.2 Daily Alarm
5.4.3 Morning Call
5.4.4 Remove Alarm
5.4.5 Autopower
5.5 Calculator
5.6 Currency Exchange
6. Network Services (see page 101)
6.1 Call Forwarding
6.1.1 Forward Always
6.1.2 Busy*
6.1.3 No Reply*
6.1.4 Unreachable*
6.1.5 Cancel All
6.2 Call Waiting
6.3 Network Selection
6.3.1 Automatic
6.3.2 Manual
6.4 Caller ID
6.4.1 Default
6.4.2 Hide Number
6.4.3 Send Number
*. Support dependent on network service provider.
58
ꢀ
Using the Menus
7. Funbox (see page 106)
7.1 Games
7.2 WAP Browser
7.2.1 mMode
7.2.2 Bookmarks
7.2.3 http://
7.2.4 Settings
7.2.5 Clear Cache
7.2.6 Push Message
7.3 Downloads
7.3.1 Games & More
7.3.2 Sounds
7.3.3 Pictures
Using the Menus
ꢀ
59
Messages
Short Message Service (SMS) allows you to send and
receive short text messages. In addition, your phone
supports the Enhanced Messaging Service (EMS), which
allows you to include simple pictures, melodies, and
animated images in your messages. To use this feature,
you must subscribe to your service provider’s message
service.
When the Message icon ( ) displays, you have new text
messages. When the memory is full, an error message
displays and you cannot receive any new messages. Use
the Delete option to remove obsolete messages.
Inbox (Menu 1.1)
The Inbox stores messages you have received. A list of
messages displays with the sender’s phone number or
name, if available.
1. Select a message and press the View soft key.
2. Use the Up and Down key to scroll through the
message.
3. To move to the previous or next message, press
.
or
60
ꢀ
Messages
While reading a message, the following options are
available using the Options soft key:
Delete: deletes the message.
Send: sends the message. See “Creating a Simple Text
Message” on page 63.
Reply: creates a reply to the sender.
Call Back: calls the sender phone number.
Cut Address: extracts the sender’s URL, e-mail
addresses, or phone numbers for storage in the
Phonebook.
Move: moves the message to another memory location
(from the SIM card to the phone’s memory or vice versa).
Select Objects: saves media items, such as sounds or
images, from the message into your phone’s memory. You
can then use the items when writing a message. For
details, see “Add Objects” on page 64.
Outbox (Menu 1.2)
The Outbox stores messages you have already sent or will
send. A list of messages displays with the recipient’s
phone number or name, if available.
Note: Messages are only saved to the Outbox if “Save and
Send” is selected.
Messages
ꢀ
61
1. Select a message and press the View soft key.
2. Use the Up and Down key to scroll through the
message.
3. To move to the previous or next message, press
.
or
While reading a message, the following options are
available using the Options soft key:
Delete: deletes the message.
Send: sends the message. See “Creating a Simple Text
Message” on page 63.
Cut Address: saves the address information in the
message.
Move to Sim: moves the message to another memory
location (from the SIM card to the phone’s memory or vice
versa).
Select Objects: saves media items, such as sounds or
images, from the message into your phone’s memory. You
can then use the items when writing a message. For
details, see “Add Objects” on page 64.
62
ꢀ
Messages
Write New (Menu 1.3)
Use this option to create and send a new text message.
Notes:Messages are only saved to the Outbox if “Save and
Send” is selected.
When you add media items to the message, the
number of characters you can enter decreases.
Creating a Simple Text Message
1. Create your message. See “Entering Text” on page 40.
2. When your message is complete, press the Options
soft key. The following options are available:
•
•
•
Send: sends the message. The message is deleted
after sending.
Save and Send: saves a copy of the message to your
Outbox, then sends the message.
Save: saves the message to your Outbox so that it
can be sent later.
• For more information about the Text Formatting
,
Add Objects Add Templates Add Phonebook Add
,
,
,
Bookmark and Language options, see “Creating a
Message Using the Options” on page 64.
Messages
ꢀ
63
3. Select Send or Save and Send and press the Select soft
key.
4. If you select a save option, choose the memory location
and press the OK soft key.
5. Enter a destination number and press the OK soft key.
The message is sent.
Note: When the phone fails to send the message, it asks you
if you want to retry. Press the OK soft key to confirm.
Otherwise, press the Exit soft key to return to the
message screen.
Creating a Message Using the Options
1. Create your message.
2. Press the Options soft key.
3. Select one of the following options:
•
Text Formatting: formats the text.
For the Size attribute, Normal
,
Large and Small
sizes are available.
For the Underline and Strikethrough attributes,
select On or Off
.
•
Add Objects: adds a sound, melody, picture, or
animated image to your message. Select the type of
item you’re adding. You can select from the various
factory-set items or choose an item received from
other sources.
64
ꢀ
Messages
•
•
•
Add Templates: applies a preset message template
to the text. See “Templates (Menu 1.4)” on page 65..
Add Phonebook: adds a Phonebook entry to your
message. Select one from the list.
Add Bookmark: adds a web page address stored in
your Bookmarks list to the message. Select one from
the list.
•
Language: changes the language used in T9 input
mode.
4. Complete the message, and send or save it using the
procedure from step 2 on page 63.
Templates (Menu 1.4)
Templates allow you to preset messages that you use
frequently.
Select an location or template and press the Options soft
key.
The following options are available:
Edit: allows you to write a new message or edit the
selected message.
Send Message: sends the selected message once it has
been retrieved.
Delete: deletes the message. Pressing the Yes soft key
when prompted to confirm.
Messages
ꢀ
65
Settings (Menu 1.5)
In this menu, you can set default messaging information.
A setting group is a collection of settings required to send
messages. The number of setting groups available
depends on the capacity of your SIM card.
Note: The last setting you accessed is automatically
activated for sending messages.
Setting x (where
x
is the setting group number):
Service Center: stores or changes the number of your
message center, which is required when sending
messages. You must obtain this number from your service
provider.
Default Destination: stores the default destination
number. The number automatically displays on the
Destination screen when you create a message.
*
Default Type : sets the default message type to Text
,
Fax
,
Email, or Paging. The network can convert the messages
into the selected format.
Default Validity*: sets the length of time your text
messages are stored at the message center while
attempts are made to deliver them.
Setting Name: allows you to assign a name to the setting
group currently being defined.
*. Support dependent on network service provider.
66
ꢀ
Messages
Common Setting: The following options are available:
Reply Path: allows the recipient of your message to send
you a reply using your message center, if your network
supports this service.
Delivery Reports: allows you to receive a message
indicating if your message reached its destination.
Bearer Selection: selects either GSM or GPRS, depending
on your network.
My Objects (Menu 1.6)
In this menu, you can see the media objects saved from
messages into your phone’s memory.
Three categories of items are available:
• My EMS Melody
• My EMS Picture
• My EMS Animation
To delete an item, press the Delete soft key while you are
reviewing it.
Messages
ꢀ
67
Use the Delete All option (Menu 1.6.4) to delete all items.
To Press the
select a category Up or Down navigation key.
To delete all of your objects,
select All Object
.
delete the marked Delete soft key.
objects
When a confirmation message displays, press the Yes soft
key to confirm.
Memory Status (Menu 1.7)
This menu shows how many messages are currently
stored in the SIM card, phone, and CB (Cell Broadcast)
memories.
To delete all messages, use the Delete All option (Menu
1.10).
To
Press the
select a message
type
Up or Down navigation key.
To delete all of your
messages, select All
Messages
.
place a check mark Mark soft key.
68
ꢀ
Messages
To
Press the
remove a check
mark
Unmark soft key.
delete the marked Delete soft key.
messages
When the confirmation message displays, press the Yes
soft key to confirm.
Voice Mail (Menu 1.8)
This menu provides access to your Voice Mail and related
settings. The following options are available:
Connect to Voice Mail: Select this option to listen to your
messages. You can quickly connect to the voice server by
pressing and holding
in Idle mode.
Voice Mail Number: allows you to change the voice mail
server number, if necessary.
To
Press the
enter the server
number
corresponding numeric
keys.
correct a digit
.
Messages
ꢀ
69
To
Press the
move the cursor to the Left or Right
left or right without
clearing the digit
navigation key.
Note: Voice Mail is a network feature. Please contact your
service provider for further details.
Broadcast (Menu 1.9)
This network service allows you to receive text messages
on various topics, such as the weather or traffic. Cell
Broadcast (CB) messages display as soon as they are
received, provided that:
• the phone is in Idle mode.
• the Receive option is set to Enable
.
• the message channel is active on the channel list.
• the Broadcast feature is supported by the network.
The following options are available:
Read: displays the message. Volatile displays the
messages from the network, but loses message contents
as soon as the phone is switched off. While reading a
message, press the Save soft key to store the message in
the Archive box for later retrieval.
Receive: enables or disables broadcast message reception.
70
ꢀ
Messages
Channel List: indicates the channels you’ve selected for
cell broadcast messages. Options are:
Select: enables or disables channels on the list by
marking each channel.
Add Channel: enters the ID and title for a new channel.
Delete: removes a channel from the list.
Edit: allows you to modify the ID and title of a channel.
Language: selects the language used when displaying cell
broadcast messages. Please contact your service provider
for more information.
Delete All (Menu 1.10)
Select this option to delete all messages stored in SIM,
phone, and Cell Broadcast memory.
Messages
ꢀ
71
Call Records
In this menu, you can view the length of your calls or a
list of calls you missed, received, or dialed.
Note: Press
records
in Idle mode to access the three types of call
.
Missed Calls (Menu 2.1)
This menu displays the numbers of the last 20
unanswered calls.
The number and name display, together with the date
and time the call was missed.
Press the Options soft key to:
• delete the call from the list.
• edit a number and save it in Phonebook.
Press
to dial the number.
Incoming Calls (Menu 2.2)
This menu displays the numbers of the last 20 incoming
calls.
The number and name display, together with the date
and time the call was received.
72
ꢀ
Call Records
Press the Options soft key to:
• delete the call from the list.
• edit a number and save it in Phonebook.
Press
to dial the number.
Outgoing Calls (Menu 2.3)
This menu displays the numbers of the last 20 calls you
made.
The number and name display, together with the date
and time the call was made.
Press the Options soft key to:
• delete the call from the list.
• edit a number and save it in Phonebook.
Press
to dial the number.
Delete All (Menu 2.4)
You can delete all of the numbers stored in each call
record. Select a call record and press the Select soft key.
When a confirmation message displays, press the Yes soft
key. To delete all of the call records, select the All Calls
option (Menu 2.4.4).
Call Records
ꢀ
73
Call Time (Menu 2.5)
This menu displays the length of a calls you made and
received.
Note: The actual time invoiced for calls by your service
provider may vary, depending on network features,
such as rounding-off for billing purposes.
The following options are available:
Last Call Time: length of the last call.
Total Outgoing: total length of all calls made since the
timer was last reset.
Total Incoming: total length of all calls received since the
timer was last reset.
Life Time: total length of all calls made and received.
Reset Timers: resets the call timers. You must first enter
the phone password and then press the OK soft key.
74
ꢀ
Call Records
Sound Settings
Sound settings allow you to customize the following:
• ring melody, volume, and type.
• sounds made when you press a key, receive a message,
open/close the phone, or switch your phone on/off.
• alert tone made every minute during a call, when you
make an error, or when your call is connected to the
system.
Note: When the phone is in Silent mode, you cannot change
sound settings.
Ring Tone (Menu 3.1)
This menu allows you to select a ring melody.
You can choose between several melodies. Each time you
select a melody, it plays for a few seconds. If you have
downloaded sounds from the Internet, you can also select
them in this menu.
Ring Volume (Menu 3.2)
This menu allows you to adjust the ring volume. Use the
Up and Down keys or the Volume keys on the left side of
the phone to increase or decrease the volume.
Sound Settings
ꢀ
75
Alert Type (Menu 3.3)
This menu specifies how you are to be informed of
incoming calls.
The following options are available:
Light Only: the service light flashes, but the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody selected in
the Ring Tone menu (Menu 3.1).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times and
then rings.
Keypad Tone (Menu 3.4)
This menu allows you to select the sound that the phone
makes when you press a key. To turn off the sound, select
Off. Options are:
• Off
• Cool
• Piano
• Tone
• Beep
76
ꢀ
Sound Settings
Message Tone (Menu 3.5)
This menu specifies how the phone informs you of a new
message.
SMS Tone (Menu 3.5.1)7
The following options are available to alert you to new
SMS messages:
•
•
•
•
•
Off: the phone does not use the SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tone: the phone uses one of several SMS tones.
*
SMS-CB Tone (Menu 3.5.2)
The following options are available to alert you to new
cell broadcast (CB) messages:
•
•
•
•
•
Off: the phone does not use the CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone: the phone uses one of several CB tones.
*. Support dependent on network service provider.
Sound Settings
ꢀ
77
Folder Tone (Menu 3.6)
This menu selects the sound that the phone makes when
you open or close the phone. To turn the sound off, select
Off
.
Power On/Off (Menu 3.7)
This menu selects the melody the phone plays when it is
switched on and off. To turn the sound off, select Off
.
Extra Tones (Menu 3.8)
You can customize additional tones used for the phone.
Press the
To turn a given tone
On
ON soft key.
A check mark displays in
front of the option.
Off
OFF soft key.
The check mark no longer
displays.
78
ꢀ
Sound Settings
The following options are available:
Error Tone: sets the phone to play an error tone when you
make a mistake.
Minute Minder: sets the phone to beep every minute
during an outgoing call to keep you informed of the length
of your call.
Connect Tone: sets the phone to beep when your call is
connected to the system.
Sound Settings
ꢀ
79
Phone Settings
Use the Phone Settings menu to customize the features of
your phone.
My Settings (Menu 4.1)
You can change the background image and the Menu
display style according to your preference.
Wallpaper (Menu 4.1.1)
This option changes the background image displayed in
Idle mode:
1. Select an image.
You have various preset images available. You can
also select the blank background or any images
downloaded from the Internet.
2. Press the Select soft key.
3. When the image displays, press the Select soft key. A
prompt asks if you want to display text on the screen.
4. Press the Yes soft key to display the current date and
time on the wallpaper image. Press the No soft key to
display only the image.
80
ꢀ
Phone Settings
Menu Style (Menu 4.1.2)
This menu allows you to select the menu display style.
You can choose either Film Style or Page Style
.
Greeting Message (Menu 4.2)
This menu sets the greeting displayed briefly when the
phone is switched on.
To
Press the
and hold it down until the
clear the
existing
message
message is cleared.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
soft key.
Own Number (Menu 4.3)
Own Number allows you view the phone number assigned
to the SIM card installed in the phone.
Phone Settings
ꢀ
81
Language (Menu 4.4)
This menu selects a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of your SIM card.
Security (Menu 4.5)
The Security feature restricts the use of your phone.
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections.
PIN Check (Menu 4.5.1)
When the PIN Check feature is enabled, you must enter
your PIN each time you switch the phone on. Anyone who
does not have the PIN cannot use your phone without
your approval.
Note: Before disabling the PIN Check feature, you must
enter your PIN.
The following options are available:
Disable: the phone connects directly to the network when
you switch it on.
Enable: you must enter the PIN each time the phone is
switched on.
82
ꢀ
Phone Settings
Change PIN (Menu 4.5.2)
This feature allows you to change your PIN, provided that
the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock (Menu 4.5.3)
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 8-digit phone password
each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see the Change Password
menu (Menu 4.5.4) below.
Once you have entered a new password, you are asked to
re-enter it for confirmation.
The following options are available:
Disable: you are not asked to enter the phone password
when you switch the phone on.
Enable: you are required to enter the phone password
when you switch the phone on.
Change Password (Menu 4.5.4)
The Change Password feature allows you to change your
current phone password. You must enter the current
password before you can specify a new one.
Phone Settings
ꢀ
83
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to re-
enter it for confirmation.
FDN Mode (Menu 4.5.5)
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in the
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does
not, this menu does not display.
Change PIN2 (Menu 4.5.6)
The Change PIN2 feature allows you to change your
current PIN2. You must enter the current PIN2 before
you can specify a new one.
Once you have entered a new PIN2, you are asked to re-
enter it for confirmation.
Note: Not all SIM cards have a PIN2. If your SIM card does
not, this menu does not display.
84
ꢀ
Phone Settings
Display Settings (Menu 4.6)
In this menu, you can change the settings for the display
or backlight.
Contrast (Menu 4.6.1)
This menu allows you to adjust the contrast of the display
screen for better viewing in different lighting conditions.
Adjust the contrast using the Up and Down keys or the
Volume keys on the left side of the phone.
Backlight (Menu 4.6.2)
You can configure the phone to turn on or off the
backlight. A marginal increase in standby/talk time can
be achieved by turning the backlight off.
Select the length of time for the backlight to be on. The
backlight turns on when you press a key or receive a call
or message and remains on for the specified length of
time.
Note: To increase battery life, the entire LCD turns off
one minute after the backlight turns off. This setting
cannot be adjusted.
If you do not want to use the backlight, select Off
.
Phone Settings
ꢀ
85
Auto Light (Menu 4.6.3)
Using this feature, you can specify the time for which the
backlight is to be used. This feature helps you to conserve
your battery power. The following options are available:
Disable: the backlight is used according to the setting in
the Back Light menu.
Enable: the backlight is used only during the specified
period of time. Set the time when the phone turns the
light on using the appropriate number keys.
Service Light (Menu 4.6.4)
This menu allows you to select whether or not the service
light is used or to set the color it flashes.
Select a color from the three available. The service light
flashes the selected color to demonstrate the option.
If you do not want to use the service light, select Off
.
Graphic Logo (Menu 4.6.5)
This menu allows you to display your service provider’s
logo instead of its name.
Off: the service provider’s name displays in Idle mode.
On: the service provider’s logo stored in your phone
displays in Idle mode; if no logo is stored, the service
provider’s name displays.
86
ꢀ
Phone Settings
Extra Settings (Menu 4.7)
You can turn the automatic re-dialing or answering
features on or off.
To turn a feature
Press the
On
ON soft key.
A check mark displays in
front of the option.
Off
OFF soft key.
The check mark no longer
displays.
The following options are available:
Auto Redial: when this option is checked, the phone
makes up to ten attempts to redial a phone number after
an unsuccessful call.
Note: The interval between two call attempts varies.
Active Folder: when this option is checked, you can
simply open the phone to answer a call.
When it is unchecked, you must open the phone and press
a key to answer a call, depending on the setting of the
Anykey Answer option.
Phone Settings
ꢀ
87
Anykey Answer: when this option is checked, you can
answer an incoming call by pressing any key, except
and the Reject soft key. To reject the call, press
Reject soft key.
or the
When this option is unchecked, you can only press
the Accept soft key.
or
Short Cut (Menu 4.8)
The Navigation keys can be used as shortcut keys. In Idle
mode, they allow you to access specific menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key:
• Key Up
• Key Down
• Key Right
• Key Left
2. Select the menu you want the key to activate.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
88
ꢀ
Phone Settings
Reset Settings (Menu 4.9)
You can easily reset your phone to its default settings. To
reset your phone:
1. Select the Reset Settings menu.
2. Enter the 8-digit phone password and press the OK
soft key.
Note: The password is preset to “00000000.” To change this
password, see “Change Password (Menu 4.5.4)” on
page 83.
Phone Settings
ꢀ
89
Organizer
The Organizer feature enables you to:
• view the calendar and organize your schedule.
• create a to do list.
• set the current date and time.
• set the alarm so that the phone rings at a specific time.
• use the phone as a calculator for basic math or currency
exchange operations.
Note: This phone’s organizer can be synced with PC-based
systems using EasyGPRS. Please consult the x426
Accessory Guide or your service provider for
further details
.
Calendar (Menu 5.1)
With the Calendar feature, you can:
• view the calendar.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder.
90
ꢀ
Organizer
Viewing the Calendar
When you select the Calendar menu (Menu 5.1), the
calendar displays with today’s date highlighted. The
following options are available when you press the
Options soft key:
Search All: displays all memos, starting with the oldest,
regardless of the date.
Delete All: allows you to delete all of the memos. You are
asked to confirm your action.
Go to Date: allows you to jump to a specific date.
Exit: exits the Calendar and returns to Idle mode.
Writing a Memo
To write or edit a memo on a specific date:
1. Select a date on the calendar.
Note: To skip to the previous or next month, press the
Volume keys on the left side of the phone.
2. Press the Select soft key.
An empty memo screen displays.
3. Enter your memo and press the OK soft key. The
phone prompts you to set an alarm.
Organizer
ꢀ
91
4. If you want an alarm to ring on the selected day, press
the Yes soft key.
Otherwise, press the No soft key. The memo is saved
and the display returns to the calendar.
5. If you pressed the Yes soft key, set the time for the
alarm and press the OK soft key.
You can also select the melody for the alarm by
pressing the Melody soft key.
6. Select either AM or PM and press the Select soft key.
The color of the date changes to green to indicate that a
memo exists for that date.
Editing a Memo
Pressing the Edit soft key allows you to edit the selected
memo.
When you finish editing the memo, press the OK soft key.
The following options are available using the Options soft
key:
Alarm: sets the alarm to ring at the specified time to
remind you of the memo. If you set the alarm earlier, you
can change or delete it.
Erase: deletes the memo.
Copy to: copies the memo to another date.
Move to: changes the date of the memo.
92
ꢀ
Organizer
To Do List (Menu 5.2)
This feature allows you to:
• create a To Do list.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating a To Do List
1. Press the New soft key.
2. Enter the first task.
3. Press the OK soft key.
4. Select High, Normal, or Low priority, and press the
Select soft key.
5. Enter the7 deadline and press the OK soft key.
If you do not want to set a deadline, press the Skip soft
key.
Editing the To Do List
When you select the To Do List menu (Menu 5.2), the
current contents display with a status mark, if the task
has been done, and priority:
Low.
High,
Normal, and
Organizer
ꢀ
93
Action
Procedure
View the details for 1. Highlight the task.
a specific task
2. Press the View soft key.
3. Scroll through the tasks using
the Up and Down keys.
Change the status 1. Highlight the task.
of a specific task
2. Press
to mark the task as
completed as of the current
date and time.
or
1. Highlight the task.
2. Press the Options soft key.
3. Select the Mark option.
4. Select the appropriate status
(Done or Undo).
Create a new task 1. Press the Options soft key.
2. Select the New option.
3. Enter text, priority and
deadline for the task.
94
ꢀ
Organizer
Action
Procedure (Continued)
1. Highlight the task.
Edit an existing
task
2. Press the Options soft key.
3. Select the Edit option.
4. Change the text, priority and/or
deadline for the task.
Sort the existing
tasks by priority or
status
1. Press the Options soft key.
2. Select the Sort option.
3. Select the sort criterion (High
,
Low Done or Undo).
,
Copy a task
1. Highlight the task.
2. Press the Options soft key.
3. Select the Copy option.
4. Change the text, priority and/or
deadline for the task.
Organizer
ꢀ
95
Action
Procedure (Continued)
Copy a task to the 1. Highlight the task.
calendar
2. Press the Options soft key.
3. Select the Copy to Calendar
option.
4. Change the text and/or
deadline for the task and set
the alarm.
Delete a task
1. Highlight the task.
2. Press the Options soft key.
3. Select the Delete option.
1. Press the Options soft key.
2. Select the Delete All option.
Delete all tasks
3. Confirm the deletion by
pressing the OK soft key.
Exit the To Do list 1. Press the Options soft key.
2. Select the Exit option.
96
ꢀ
Organizer
Time & Date (Menu 5.3)
This menu allows you to change the time and date
displayed. You can also view the time in another city. The
following options are available:
Set Time: allows you to enter the current time. You can
choose the time format in the Time Format menu (Menu
5.3.4).
Note: Before setting the time, you must specify your time
zone in the World Time menu (Menu 5.3.3).
Set Date: allows you to enter the month, day, and year.
World Time: allows you to view the time in other
locations. The screen shows the:
• city name.
• current date and time.
• time difference between the selected city and your city
if you have set the local time.
• city selected as your time zone.
To select your time zone:
1. Select the city corresponding to your time zone. The
local date and time display.
2. Press the Set soft key.
Time Format: allows you to change the time format to 24
Hours or 12 Hours
.
Organizer
ꢀ
97
Alarm (Menu 5.4)
This feature allows you to:
• set an alarm to ring at a specific time.
• set the phone to switch on automatically and sound an
alarm even if the phone is switched off.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same time.
Morning Call: the alarm rings to wake you up in the
morning.
To set the alarm:
1. Choose the type of alarm to be set and press the Select
soft key.
2. Enter the time for the alarm to sound.
To use the alarm options, press the Options soft key.
The following options are available:
•
•
Remove Alarm: deactivates the alarm.
Alarm Sound Set: selects an alarm melody.
3. Press the OK soft key.
98
ꢀ
Organizer
Note: Your phone is preset to use 24-hour format. To
change the time format, see “Time Format” on
page 97.
4. If you select Morning Call in step 1, select the repeat
option, Monday to Friday or Monday to Saturday and
press the Select soft key.
To stop the alarm when it rings, open the phone and press
the Exit soft key.
Remove Alarm: deactivates all alarm settings.
Autopower: when set to Enable, the alarm rings at the
specified time, even if the phone is switched off.
If the option is set to Disable and the phone is switched
off at the specified time, the alarm does not sound.
Calculator (Menu 5.5)
With this feature, you can use the phone as a calculator:
1. Enter the first number using the numeric keys.
Notes
:
To delete mistakes or clear the display, press
.
To include a decimal point or a bracket, press the left
soft key until the symbol you want displays.
2. Press the right soft key until the symbol you want
appears;
+
(addition),
-
(subtraction),
*
(multiplication),
/
(division).
Organizer
ꢀ
99
3. Enter the second number.
4. To view the result, press
.
Currency Exchange (Menu 5.6)
Using this menu, you can figure currency conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
To insert a decimal point, press
.
2. Enter the amount to convert and press the OK soft
key.
The amount you entered and its equivalent value
display.
3. Press the Exit soft key to exit the currency convertor.
100
ꢀ
Organizer
Network Services
The Network Services menu provides access to services
provided by your service provider. For information about
available network services, contact your service provider.
Call Forwarding (Menu 6.1)
This service re-routes calls to a number you specify.
Use the following options to forward voice calls or data
calls:
Forward Always: all calls are forwarded.
Busy: calls are forwarded when you are already on
another call.
No Reply: calls are forwarded when you do not answer
the phone.
Unreachable: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All: all call forwarding options are canceled.
To set your call forwarding options:
1. Select a call forwarding option and press the Select
soft key.
Network Services
ꢀ
101
2. Select the type of calls, voice or data, and press the
Select soft key.
The current status displays. If the option has already
been set, the call forwarding number displays.
3. To
activate call
Press the
Activate soft key. Go to
step 4.
forwarding
change the call
number
Change soft key. Go to
step 4.
deactivate call
forwarding
Remove soft key.
4. Enter the number where the calls are being forwarded
and press the OK soft key.
To enter an international dialing code, press the
until the sign displays.
O
key
+
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can deactivate all call forwarding settings by
selecting the Cancel All option.
102
ꢀ
Network Services
Call Waiting (Menu 6.2)
This service informs you when someone is trying to reach
you during another call.
You can specify individual call waiting options for voice
calls or data calls.
To set your call waiting options:
1. Select voice or data to indicate the type of call and
press the Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting feature
by using the Activate or Deactivate soft keys.
To return to the previous screen, press the Exit soft
key.
You can deactivate all call waiting settings by selecting
the Cancel All option.
Network Selection (Menu 6.3)
Network Selection allows you to automatically or
manually select the network used when roaming outside
of your home area.
Network Services
ꢀ
103
Note: You can select a network other than your home
network only if your service provider offers this
option.
To indicate automatic or manual roaming network
selection:
1. When Network Selection displays, press the Select
soft key.
2. Select the appropriate option and press the OK soft
key.
Automatic connects to the first available network
when roaming.
Manual scans for the available networks. Go to Step 3.
3. Select a network from the list then press the OK soft
key.
Caller ID (Menu 6.4)
You can prevent your caller ID information from being
displayed when you place a call.
Note: Some service providers do not allow the user to change
this setting.
104
ꢀ
Network Services
The following options are available:
Default: the default setting provided by the service
provider is used.
Hide Number: your number does not display when you
make a call.
Send Number: your number displays each time you make
a call.
Network Services
ꢀ
105
Funbox
The Funbox menu contains several fun options.
Games (Menu 7.1)
To play a game, highlight the game name and press the
Select soft key.
For each game, the following options are available:
New Game: starts a game.
High Score: displays high scores.
Key Info.: displays keys used in the game.
Continue: continues a paused game.
While you are playing a game:
To
Press
adjust the volume of the volume keys.
the game sound
pause or resume the
game
.
exit the game
If your score makes the High Score list, you may enter a
name of up to 10 characters.
106
ꢀ
Funbox
WAP Browser (Menu 7.2)
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to navigate the wireless internet.
mMode (Menu 7.2.1)
Selecting this menu connects the phone to the network
and loads the homepage of the wireless internet service
provider. You can also press
in idle mode.
The content of the WAP Browser startup homepage
depends on your wireless internet service provider. To
scroll, use the Up and Down keys.
Note: To access the startup homepage from any other screen
in the WAP Browser, use the Home option.
Exiting the WAP Browser
To exit the browser at any time, press
hold
or press and
.
Funbox
ꢀ
107
Navigating the WAP Browser
To
Press the
scroll through and Up or Down navigation key
select browser
items
until the
symbol points
to the required item, and
then press the OK soft key
to confirm the selection.
select a numbered corresponding numeric
item
key.
return to the
previous page
Back soft key or the
.
return to the
and select the Home
startup homepage menu.
Entering Text in the WAP Browser
When you are prompted to enter text, the text input mode
icon displays. The following modes are available:
Upper-case character
characters.
(A): allows you to enter upper-case
Lower-case character
characters.
(a): allows you to enter lower-case
Note: You can enter symbols in upper or lower-case
character mode by pressing
.
Number ): allows you to enter numbers.
(1
108
ꢀ
Funbox
To change the Press
text input
one or more times.
mode
To enter a
space
Press
.
To edit text
1. Set the cursor to the right of
the character(s) to be
corrected.
2. Press
as required.
3. Enter the correct character(s).
Selecting and Using Menu Options
Various menus are available when you are using the WAP
Browser to navigate the wireless internet.
To access a menu option:
1. Press and hold
. A menu displays.
2. Press the Select soft key to select an item.
3. Select a secondary option using the Up and Down
keys, then press the Select soft key to confirm.
Note: The menus may vary, depending on your version of the
WAP Browser.
Funbox
ꢀ
109
The following options are available:
Reload: reloads the current page.
Home: returns to wireless internet service provider
homepage.
Goto URL: allows you to manually enter the URL address
of a Web page. After entering an address, press the OK
soft key.
Show URL: displays the URL address of the current site.
You can also set the default homepage to the current
address.
To
Press the
set the current
page as your
Option soft key, select the
Save to Home option, and
startup homepage press the Select soft key.
set a bookmark for Option soft key, select the
the current page
Save to Bookmark option,
and press Select soft key.
cancel your setting Back soft key.
Edit Home: changes the startup homepage manually.
Enter the required URL and press the OK soft key.
110
ꢀ
Funbox
Bookmarks (Menu 7.2.2)
This menu allows you to store the URL addresses of your
favorite web sites. You can access this menu directly by
pressing and holding down
Browser.
while using the WAP
To store a URL address:
1. Select an empty location and press the Options soft
key.
2. Enter the address and press the Enter soft key.
3. Enter a name for the favorite item and press the Enter
soft key.
After saving favorite items, use the following options by
pressing the Options soft key:
Goto URL: takes you to the site.
Edit: edits the URL address.
Erase: deletes the URL address.
http:// (Menu 7.2.3)
This menu allows you to manually enter the URL address
of a web site. You can access this menu directly by
pressing and holding
in the WAP browser.
Funbox
ꢀ
111
Settings (Menu 7.2.4)
This option allows you to set up five proxy servers for the
WAP browser. Contact your service provider for details
about setting options.
For each server, the following options are available:
Profile Name: enter a name you want to assign to the
HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays, delete it
using
and enter your own selection.
Security: set the data transmission mode. Select Secure
to protect your data against unauthorized access;
otherwise, choose Non-Secure
.
IP Address: enter the WAP gateway address required to
connect to the Internet.
Bearer: select the bearer to be used for each type of
network address accessed: GPRS or Data. The remaining
options depend on the Bearer setting.
When the bearer is set to GPRS
•
•
•
User Name: enter the User ID required to connect to
the GPRS network.
Password: enter the password required to connect to
the GPRS network.
APN: enter the access point name used for the address
of the GPRS network gateway.
112
ꢀ
Funbox
When the bearer is set to Data
•
•
•
•
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone number.
Data Call Type: select a data call type from Analog or
ISDN
.
Note: The WAP Browser settings may vary, depending on
the service provider. Contact your service provider for
further information.
Clear Cache (Menu 7.2.5)
You can clear the information stored in the cache, which
stores the most recently accessed Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
press the No soft key.
Push Message (Menu 7.2.6)
This menu allows you to receive and access web messages
from the server.
The following options are available:
Inbox: displays messages received from the web server.
Receive: sets whether or not your phone receives web
messages.
Delete All: deletes all web messages.
Funbox
ꢀ
113
Downloads (Menu 7.3)
You can download images, sounds, and MIDlets (Java
applications running on mobile phones) from various
sources using the WAP Browser and store them in your
phone. Use the Downloads menu to access the
downloaded items.
Note: Java services may not be available depending upon
your service provider.
Games & More (Menu 7.3.1)
When you access this menu, the list of the default games
appears. Once you have downloaded MIDlets, they are
added to the list.
Launching a MIDlet
1. Scroll to the MIDlet you want and press the Launch
soft key.
2. Start the MIDlet using the appropriate soft keys.
Using the Menus
From the Main Screen, press the Menu soft key for
following options.
Info: displays information about the selected MIDlet,
such as the file size, application version, vendor, and
location of the MIDlet description file.
114
ꢀ
Funbox
Remove: removes the MIDlet. When the confirmation
message appears, press the Remove soft key. To cancel
your selection, press the Cancel soft key. This option is
not available for the default games.
Update: accesses the server and updates the MIDlet. This
option is not available for the default games.
Entering Text
If you need to enter text while using a MIDlet, you can
use the following input modes:
ABC: enters upper-case characters.
abc: enters lower-case characters.
123: enters numbers.
Sym: enters symbols. After highlighting a symbol by
pressing the Navigation keys, press
to insert it.
: enters English characters by pressing one key per
letter. In this mode, you can change the case by pressing
.
To change the text input mode, press
appropriate indicator displays.
until the
Funbox
ꢀ
115
Sounds (Menu 7.3.2)
In this menu, you can view the list of sounds downloaded
from the web server or received in multimedia messages.
You can set the downloaded sounds as the current ring
tone or send them to other phones.
Press the Options soft key to access the following options:
Rename: changes the name of the sound.
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring tone.
Pictures (Menu 7.3.3)
This menu displays the list of pictures downloaded from
the web server or received in messages. You can select
downloaded pictures as a background image or send them
to other phones.
Pressing the Options soft key for the following options:
Rename: changes the name of the image.
Delete: deletes the image.
Set as Wallpaper: sets the image as your wallpaper.
116
ꢀ
Funbox
Solving Problems
If you are experiencing problems with your phone,
perform the following simple checks before contacting a
service professional. This may save you the time and
expense of an unnecessary service call.
When you switch your phone on, the following
messages may appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled. You
must enter the phone’s password before you can use the
phone.
Enter PIN
• You are using your phone for the first time. You must
enter the Personal Identification Number supplied
with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered. To
disable this feature, use the PIN Check menu (Menu
4.5.1).
Enter PUK
• The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your service provider.
Solving Problems
ꢀ
117
“No service,” “Network failure” or “Not done” displays
• The network connection was lost. You may be in a weak
signal area (in a tunnel or surrounded by buildings).
Move and try again.
• You are trying to access an option that is not available
with your service provider. Contact the service provider
for further details.
You have entered a number but it was not dialed
• Have you pressed
?
• Are you accessing the correct cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on ( pressed for more than
one second)?
• Are you accessing the correct cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
• Have you activated the Mute function?
• Are you holding the phone close enough to your mouth?
The microphone is located at the bottom of the phone.
118
ꢀ
Solving Problems
The phone starts beeping and “**Warning** Low
Battery” flashes on the display
• The battery is insufficiently charged. Recharge the
battery. See “Charging a Battery” on page 17.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal strength
from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a Phonebook
entry
• Check that the number has been stored correctly, by
using the Phonebook Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Contact AT&T Wireless Services Customer Care
at 1-866-293-4634.
Solving Problems
ꢀ
119
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect the
phone against unauthorized use.
When requested for any of the codes explained below,
enter the appropriate code (displayed as asterisks) and
press the OK soft key. If you make a mistake, press
until the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2 codes can
be changed using the Security menu (Menu 4.5). See
“Security (Menu 4.5)” on page 82.
Important! Avoid using access codes resembling
emergency numbers, such as 911, so that you do not dial
an emergency number accidentally.
If you do not have your PIN, please contact your network
service provider. If you change any of the default access
codes, please store the new codes in a safe place for
reference. If you lose your codes, you will need to contact
your network service provider to unlock your phone.
120
ꢀ
Access Codes
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The phone
password is supplied with the phone and is preset to
“00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
“Phone Lock (Menu
4.5.3)” on page 83.
change the phone
password
“Change Password
(Menu 4.5.4)” on
page 83.
PIN
The
Personal
Identification
Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is
usually supplied with the SIM card. The default PIN
is 1111
.
If you enter an incorrect PIN three times in succession,
the code is disabled and cannot be used until you enter
Access Codes
ꢀ
121
the PUK to re-enable it. To enable the PIN number:
To
See
activate/deactivate the
PIN Check feature
“PIN Check (Menu
4.5.1)” on page 82.
change the PIN
“Change PIN (Menu
4.5.2)” on page 83.
PUK
The 8-digit PUK (
PIN
Unblocking
Key) is required to
change a disabled PIN. The PUK may be supplied with
the SIM card. If not, or you have lost it, contact your
service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft
key.
3. When the Confirm New PIN message displays, enter
the same code again and press the OK soft key.
When you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact your
service provider for a new card.
122
ꢀ
Access Codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions. These functions are
available if supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the functions
until you re-enable it by entering the PUK2. To change
the PIN2, see “Change PIN2 (Menu 4.5.6)” on page 84.
PUK2
The 8-digit PUK2 (
PIN
Unblocking
Key 2), supplied with
some SIM cards, is required to change a disabled PIN2. If
you lose the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK soft
key.
3. When the Confirm PIN2 message displays, enter the
same code again and press the OK soft key.
When you enter an incorrect PUK2 ten times in
succession, you are not able to access the functions
requiring the PIN2. Contact your service provider for a
new card.
Access Codes
ꢀ
123
Health and Safety
Information
Usage guidelines:
All about performance and safety
Getting the Most Out of Your Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal. If you’re inside a
building, being near a window may give you better
reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key. Anytime the Power Save feature is
activated, a message displays on the screen. When a
signal is found, your phone returns to standby mode.
124
ꢀ
Health and Safety Information
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it’s turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP
standards described below.
In 1991-92, the Institute of Electrical and Electronics
Engineers (IEEE) and the American National Standards
Institute (ANSI) joined in updating ANSI’s 1982 standard
for safety levels with respect to human exposure to RF
signals. More than 120 scientists, engineers and
physicians from universities, government health agencies
and industries developed this updated standard after
reviewing the available body of research. In 1993, the
Federal Communications Commission (FCC) adopted this
updated standard in a regulation. In August 1996, the
FCC adopted hybrid standard consisting of the existing
ANSI/IEEE standard and the guidelines published by the
National Council of Radiation Protection and
Measurements (NCRP).
Health and Safety Information
ꢀ
125
Maintaining Your Phone’s Peak Performance
Note: For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-extended
and over your shoulder.
• Try not to hold, bend or twist the phone’s antenna.
• Don’t use the phone if the antenna is damaged.
• Speak directly into the phone’s receiver.
Maintaining Safe Use of and Access to Your
Phone
FAILURE TO FOLLOW THE INSTRUCTIONS
OUTLINED MAY LEAD TO SERIOUS PERSONAL
INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE
U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF
126
ꢀ
Health and Safety Information
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
Using Your Phone While Driving
Talking on your phone while driving is illegal in some
states. Even where it’s not, it can divert your attention
from driving. Remember that safety always comes first.
When using your phone in the car:
• Get to know your phone and its features, such as speed
dial and redial.
• When available, use a hands-free device.
• Position your phone within easy reach.
• Let the person you are speaking to know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions.
• Do not take notes or look up phone numbers while
driving.
• Dial sensibly and assess the traffic; if possible, place
calls when you stationary or before pulling into traffic.
• Do not engage in stressful or emotional conversations
that may divert your attention from the road.
• Dial
9,1,1
to report serious emergencies. It’s free from
your wireless phone.
• Use your phone to help others in emergencies.
• Call special non-emergency wireless number when
necessary.
Health and Safety Information
ꢀ
127
Following Safety Guidelines
Note: Always turn off the phone in health care facilities and
request permission before using the phone near
medical equipment.
To operate your phone safely and efficiently, always follow
any special regulations in a given area. Turn your phone
off in areas where use is forbidden or when it may cause
interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, RF signals from
wireless phones may affect inadequately shielded
electronic equipment.
RF signals may affect improperly installed or
inadequately shielded electronic operating systems and/
or entertainment systems in motor vehicles. Check with
the manufacturer or their representative to determine if
these systems are adequately shielded from external RF
signals. Also check with the manufacturer regarding any
equipment that has been added to your vehicle.
Consult the manufacturer of any personal medical
devices, such as pacemakers and hearing aids, to
determine if they are adequately shielded from external
RF signals.
128
ꢀ
Health and Safety Information
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To
prevent possible interference with aircraft systems, the
U.S. Federal Aviation Administration (FAA) regulations
require you to have permission from a crew member to
use your phone while the plane is on the ground. To
prevent any risk of interference, FCC regulations prohibit
using your phone while the plane is in the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off
your phone when in a blasting area or in other areas with
signs indicating that two-way radios should be turned off.
Construction crews often use remote-control RF devices
to set off explosives.
Note: Never transport or store flammable gas, liquid or
explosives in the compartment of your vehicle that
contains your phone or accessories.
Turn off your phone when you’re in any area that has a
potentially explosive atmosphere. Although it’s rare, your
phone or its accessories could generate sparks. Sparks
could cause an explosion or a fire resulting in bodily
injury or even death. These areas are often, but not
always, clearly marked. They include:
• Fueling areas such as gas stations.
• Below deck on boats.
• Fuel or chemical transfer or storage facilities.
Health and Safety Information
ꢀ
129
• Areas where the air contains chemicals or particles
such as grain, dust or metal powders.
• Any other area where you would normally be advised to
turn off your vehicle’s engine.
Restricting Children’s Access to your Phone
Your phone is not a toy. Children should not be allowed to
play with it because they could hurt themselves and
others, damage the phone or make calls that increase
your phone bill.
Caring for the Battery
The guidelines listed below help you get the most out of
your
battery’s performance.
• Use only Samsung-approved batteries and desktop
chargers. These chargers are designed to maximize
battery life. Using other batteries or chargers voids
your warranty and may cause damage.
• In order to avoid damage, charge the battery only in
temperatures that range from 32º F to 104º F
(0º C to 40º C).
• Don’t use the battery charger in direct sunlight or in
high humidity areas, such as the bathroom.
• Never dispose of the battery by incineration.
• Keep the metal contacts on top of the battery clean.
130
ꢀ
Health and Safety Information
• Don’t attempt to disassemble or short-circuit the
battery.
• The battery may need recharging if it has not been
used for a long period of time.
• It’s best to replace the battery when it no longer
provides
acceptable performance. It can be recharged hundreds
of times before it needs replacing.
Don’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
Less than one month
32º F to 104º F (0º C to 40º C)
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, contact
your nearest Samsung-authorized service center.
• For safety, do not handle a damaged or leaking Li-Ion
battery.
• Be sure to dispose of your battery properly. In some
areas, the disposal of batteries in household or business
trash may be prohibited.
Health and Safety Information
ꢀ
131
Acknowledging Special Precautions and
FCC
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for
this equipment, and void your authority to operate this
equipment. Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories may be
dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece
of equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
132
ꢀ
Health and Safety Information
Body-Worn Operation
To maintain compliance with FCC RF exposure
guidelines, if you wear a handset on your body, use the
Samsung supplied or approved carrying case, holster or
other body-worn accessory. If you do not use a body-worn
accessory, ensure that the antenna is at least one inch
(2.5 centimeters) from your body when transmitting. Use
of non- Samsung approved accessories may violate FCC
RF exposure guidelines.
For more information about RF exposure, please visit the
FCC website at www.fcc.gov.
FDA Consumer Update
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
when in stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may
Health and Safety Information
ꢀ
133
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the
manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones
so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological effects
of RF of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any
RF exposure to the user that it is not necessary for
device function; and
• Cooperate in providing users of wireless phones with
the best possible information on possible effects of
wireless phone use on human health.
134
ꢀ
Health and Safety Information
FDA belongs to a interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Committee
• Occupational Safety and Health Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities about wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the wireless exposures that people get from
these base stations are typically thousands of times lower
than those they get from wireless phones. Base stations
are thus not the subject of the safety questions discussed
in this document.
Health and Safety Information
ꢀ
135
What kinds of phones are the subject of this update?
The term “wireless phones” refers here to hand-held
wireless phones with built-in antennas, often called “cell,”
“mobile,” or “PCS”. These types of wireless phones can
expose the user to measurable radio frequency energy
(RF) because of the short distance between the phone and
the user’s head. These RF exposures are limited by
Federal Communications Commission safety guidelines
that were developed with the advice of FDA and other
federal health and safety agencies. When the phone is
located at greater distances from the user, the exposure to
RF is drastically lower because a person’s RF exposure
decreases rapidly with increasing distance from the
source. The so-called “cordless phones” which have a base
unit connected to the phone wiring in a house, typically
operate at far lower per levels, and thus produce RF
exposures far below the FCC safety limits.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could Accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
136
ꢀ
Health and Safety Information
engineered or treated with cancer-causing chemicals so
as to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposed the animals to RF for up
to 22 hours per day. These conditions are not similar to
the conditions under which people use wireless phones, so
we don’t know with certainty what results of such studies
mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glaucoma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phones RF exposures. However,
none of the studies can answer questions about long-term
exposures, since average period of phone use in these
studies was around three years.
What research is needed to decide whether RF
exposure from wireless phones poses a health threat?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few
years. However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
data that is directly applicable to human populations, but
ten or more years’ follow-up may be needed to provide
Health and Safety Information
ꢀ
137
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. Toxicology Program and
with groups of investigators around the world to ensure
that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of tis work has been the development of a detailed
agenda of research needs that has driven the
establishment of new research programs around the
world. The project has also helped develop a series of
public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
138
ꢀ
Health and Safety Information
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
How can I find out how much radio frequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with
Federal Communications Commission (FCC) guidelines
that limit radio frequency energy (RF) exposures. FCC
established these guidelines in consultation with FDA
and other federal health and safety agencies. The FCC
limit for exposure from wireless telephones is set at a
Specific Absorption Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council
on Radiation Protection and Measurement. The exposure
limit takes into consideration the body’s ability to remove
heat from the tissue that absorb energy from the wireless
phone and is set well below levels known to have effects.
Manufacturers of wireless phones must report the RF
exposure level for each model of phone to the FCC. The
FCC website (http://www.fcc.gov/oet/rfsafety) gives
directions for locating the FCC identification number on
Health and Safety Information
ꢀ
139
your phone so you can find your phone’s RF exposure
level in the online listing.
What has FDA done to measure the radio frequency
energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for measuring
the radio frequency energy (RF) exposure from wireless
phones and other wireless hand sets with the
participation and leadership of FDA scientists and
engineers. The standard, “Recommended Practice for
Determining the Spatial-Peak Specific Absorption Rate
(SAR) in the Human Body Due to Wireless
Communications Devices: Experimental Techniques,”
sets forth the first consistent test methodology for
measuring the rate at which RF is deposited in the heads
of wireless phone users. The test method uses a tissue-
simulating model of the human head. Standardized SAR
test methodology is expected to greatly improve the
consistency of measurements made at different
laboratories on the same phone. SAR is the measurement
of the amount of energy absorbed in tissue, either by the
whole body or a small part of the body. It is measured in
watts/kg (or milliwatts/g) of matter. This measurement is
used to determine whether a wireless phone complies
with safety guidelines.
140
ꢀ
Health and Safety Information
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products--and at this point we
do not know that there is--it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to
a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about RF exposure from these products, you can use
measures like those described above to reduce your RF
exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measured described above would apply
to children and teenagers using wireless phones.
Health and Safety Information
ꢀ
141
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such
a recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence that
any health hazard exists.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed on late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
142
ꢀ
Health and Safety Information
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when
a person uses a “compatible” phone and a “compatible”
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve
the problem.
Where can I find additional information?
For additional information, please refer to the following
resources:
• FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
• Federal Communications Commission FCC) RF
Safety Program (http://www.fda.gov/oet/rfsafety)
• International Commission on Non-Ionizing Radiation
Protection (http://www.icnirp.de)
• World Health Organization (WHO) International
EMF Project (http://www.who.int/emf)
• National Radiological Protection Board (UK)
(http://www.nrpb.org.uk)
Health and Safety Information
ꢀ
143
CTIA Safety Information
Exposure to radio frequency signals
Your wireless hand held portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines with
safety levels for hand-held wireless phones. Those
guidelines are consistent with the safety standards
previously set by both U.S. and international standard
bodies:
• ANSI C95.1 (1992)
• NCRP Report 86 (1986)
• ICNIRP (1996)
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific literature.
For example, over 120 scientists, engineers, and
physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC
guidelines (and those standards).
144
ꢀ
Health and Safety Information
Antenna care
Use only the specified of approved replacement antenna.
Unauthorized antennas, modifications, or attachments
could damage the phone and may violate FCC
regulations.
Phone operation
NORMAL POSITION: Hold the phone as you would any
other telephone with the antenna pointed up and over
your shoulder.
Tips on efficient operation:
For your phone to operate most efficiently:
• Extend your antenna fully.
• Do not touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a higher
power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey
them. Also, if using your phone while driving, please:
• Give full attention to driving--driving safety is your
first responsibility.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering
a call if driving conditions so require.
Health and Safety Information
ꢀ
145
Electronic devices
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not
be shielded against RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6”) inches
be maintained between a hand-held wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with
the independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the phone more than six inches
from their pacemaker when the pacemaker is turned
on;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to minimize
the potential for interference.
• If you have any reason to suspect that interference is
taking place, turn your phone OFF immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your service provider (or call the
customer service line to discuss alternatives.) Optional
for each phone manufacturer.
146
ꢀ
Health and Safety Information
Other medical devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been
added to your vehicle.
Posted facilities
Turn your phone OFF in any facility where posted notices
so require.
Aircraft
FCC regulations prohibit using your phone while in the
air. Switch OFF your phone before boarding an aircraft.
Health and Safety Information
ꢀ
147
Blasting areas
To avoid interfering with blasting operations, turn your
phone OFF when in a “blasting area” or in areas posted:
“Turn off two-way radio”. Obey all signs and instructions.
Potentially explosive atmospheres
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury of even death.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include fueling
areas such as gasoline stations; below deck on boats; fuel
or chemical transfer or storage facilities; vehicles using
liguefied petroleum gas (such as propane or butane);
areas where the air contains chemicals or particles, such
as grain, dust, or metal powders; and any other area
where you would normally be advised to turn off your
vehicle engine.
For vehicles equipped with an airbag
An airbag inflates with great force. DO NOT place
objects, including both installed or portable wireless
equipment, in the area over the air bag deployment area.
If in-vehicle wireless equipment is improperly installed
and the air bag inflates, serious injury could result.
148
ꢀ
Health and Safety Information
Owner's Record
The model number, regulatory number and serial number
are located on a nameplate inside the battery
compartment. Record the serial number in the space
provided below. This will be helpful if you need to contact
us about your phone in the future.
Model: SGH-x426
Serial No.:
User Guide Proprietary Notice
T9 Text Input is licensed by Tegic Communications and is
covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S.
Pat. 6,011,554 and other patents pending.
Health and Safety Information
ꢀ
149
STANDARD LIMITED
WARRANTY
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
(SAMSUNG) warrants to the original purchaser
("Purchaser") that SAMSUNG’s Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period of time after
that date:
Phone 1 Year
Batteries 1 Year
Leather Case/Pouch 90 Days
Holster90 Days
Other Phone Accessories 1 Year
What is Not Covered? This Limited Warranty is
conditioned upon proper use of Product by Purchaser.
This Limited Warranty does not cover: (a) defects or
damage resulting from accident, misuse, abuse, neglect,
unusual physical, electrical or electromechanical stress,
or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial
number removed or made illegible; (c) any plastic
surfaces or other externally exposed parts that are
scratched or damaged due to normal use; (d) malfunctions
150
ꢀ
STANDARD LIMITED WARRANTY
resulting from the use of Product in conjunction with
accessories, products, or ancillary/peripheral equipment
not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada.
This Limited Warranty covers batteries only if battery
capacity falls below 80% of rated capacity or the battery
leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery
charger not specified or approved by SAMSUNG for
charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the
applicable warranty period, SAMSUNG will repair or
replace, at SAMSUNG’s sole option, without charge to
Purchaser, any defective component part of Product. To
obtain service under this Limited Warranty, Purchaser
must return Product to an authorized phone service
facility in an adequate container for shipping,
accompanied by Purchaser’s sales receipt or comparable
substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers’ name and
address. To obtain assistance on where to deliver the
Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace
STANDARD LIMITED WARRANTY
ꢀ
151
the defective Product. SAMSUNG may, at SAMSUNG’s
sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace
Product with a rebuilt, reconditioned or new Product.
Repaired/replaced leather cases, pouches and holsters
will be warranted for a period of ninety (90) days. All
other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components,
boards and equipment shall become the property of
SAMSUNG. If SAMSUNG determines that any Product
is not covered by this Limited Warranty, Purchaser must
pay all parts, shipping, and labor charges for the repair or
return of such Product.
What Are the Limits On SAMSUNG’s Liability? EXCEPT
AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT “AS IS,” AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE
NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR
ITS FITNESS FOR ANY PARTICULAR PURPOSE OR
USE;
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
152
ꢀ
STANDARD LIMITED WARRANTY
•
DESIGN, CONDITION, QUALITY, OR
PERFORMANCE OF THE PRODUCT;
•
THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN ADDITION, SAMSUNG SHALL NOT BE LIABLE
FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE, USE, OR MISUSE OF, OR
INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
STANDARD LIMITED WARRANTY
ꢀ
153
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES
ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT AND STATES PURCHASER’S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE
154
ꢀ
STANDARD LIMITED WARRANTY
OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT
WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND
SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
STANDARD LIMITED WARRANTY
ꢀ
155
Samsung Telecommunications America, L.P.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2003 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [080802]
156
ꢀ
STANDARD LIMITED WARRANTY
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here are
a few definitions.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between the
two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
Glossary
ꢀ
157
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS provides continuous connection
to the Internet for mobile phone and computer users. It is
based on the Global System for Mobile Communication
(GSM) circuit-switched cellular phone connections and
the Short Message Service (SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various network
operators. GSM covers most European countries and
many other parts of the world.
Java
Programming language generating applications that can
run on all hardware platforms, whether small, medium or
large, without modification. It has been promoted for and
geared heavily to the Web, both for public Web sites and
Intranets. When a Java program runs from a Web page, it
is called a Java applet. When it is run on a mobile phone
or pager, it is called a MIDlet.
Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
158
ꢀ
Glossary
Multiparty Calling
Ability to establish a conference call involving up to five
additional parties.
Phone Password
Security code used to unlock the phone when you have
selected the option to lock it automatically each time it
switches on.
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorized use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-digit
number and can be changed, as required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an incorrect
PIN has been entered three times in succession. The
eight-digit number is supplied by the service provider
with the SIM card.
Roaming
Use of your phone when you are outside your home area
(when travelling for example).
Glossary
ꢀ
159
SDN (Service Dialing Numbers)
Telephone numbers supplied by your network provider
and giving access to special services, such as voice mail,
directory inquiries, customer support and emergency
services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information required
to operate the phone (network and memory information,
as well as the subscriber’s personal data). The SIM card
fits into a small slot on the back of the phone and is
protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and
from another subscriber without having to speak to the
correspondent. The message created or received can be
displayed, received, edited or sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• Varies according to the function that you are currently
using
• Is indicated on the bottom line of the display just above
the corresponding key
160
ꢀ
Glossary
Dual Band
Ability to handle any of the following types of network:
GSM 850 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Voice Mail
Computerized answering service that automatically
answers your calls when you are not available, plays a
greeting (optionally in your own voice) and records a
message.
Glossary
ꢀ
161
Index
Caller groups
editing • 36
searching • 35
Caller ID • 104
Calls
A
Access codes • 120
Alarm • 98
Alert type • 76
Answering
answering • 23
ending • 21
forwarding • 101
holding • 47
making • 20
,
50
call • 23
second call • 50
Anykey answer • 88
Auto redial • 87
redialing • 21
rejecting • 24
B
waiting • 50 103
,
Background image • 80
Backlight
Characters, enter • 40
Connect tone • 79
auto light • 86
description • 12
time, set • 85
Currency exchange • 100
Battery
D
charging • 17
installing • 16
low indicator • 18
removing • 16
Battery Care 130
Broadcast messages • 70
Dangerous Areas 129
Date, set • 97
Deleting
calendar memos • 92
phonebook • 33
task • 96
text message • 61 62
,
C
Delivery reports, message • 67
Dialed calls • 73
Display
Calculator • 99
Calendar memos
copying • 92
backlight • 12
icons • 10
erasing • 92
writing • 91
layout •
9
Call back, message • 61
Call records
settings • 85
DTMF tones, send • 49
incoming • 72
missed • 24 72
,
E
outgoing • 73
Call time • 74
Earpiece volume • 23
EMS (Enhanced Message Service) •
L
60
Language, select • 82
Last number, redial • 21
Locking
Error tone • 79
F
phone • 83
Low battery indicator • 18
Lower-case characters
entering • 43
FCC Notice 132
FDN (Fixed Dial Number) mode • 84
Flying 129
Folder tone • 78
Forwarding, calls • 101
Funbox • 106
M
Memory status
phonebook • 39
text messages • 68
Menu style • 81
Menus
G
Games • 106
Graphic logo • 86
Greeting message • 81
accessing • 53
list • 54
Message tone • 77
Messages
H
cell broadcast • 70
greeting • 81
multimedia • 116
reading • 60
setting • 66
Holding, call • 47
I
Icons, description • 10
Inbox, messages • 60
International calls • 20
text • 60
voice • 69
web • 113
MIDlets • 114
Minute minder • 79
J
Missed calls • 24
,
72
Java service • 114
Morning call • 98
Multi-party calls • 51
Muting
K
all sounds • 27
key tones • 48
Key volume • 23
Keypad tones
selecting • 76
sending • 48
Keys
N
Names
description •
location •
shortcut • 88
7
entering • 40
searching/dialing • 34
6
ꢀ
163
Network selection • 103
Network services • 101
Numbers, phone
PIN2
changing • 84
description • 123
Power on/off tone • 78
Power Save Feature 124
Problems, solving • 117
PUK • 122
searching/dialing • 34
storing • 30
O
PUK2 • 123
On/off switch, phone • 19
Organizer • 90
R
Outbox, messages • 61
Own number • 81
Radio Frequency 125
Received calls • 72
Received messages • 60
Reception 124
Owner's Record 149
P
Redialing
Password
automatically • 87
manually • 21
Resetting phone • 89
Ring tone • 75
phone • 83 121
,
Peak Performance 126
Phone
display •
Icons • 10
keys •
layout •
locking • 83
password • 121
resetting • 89
9
Ring type • 76
Ring volume • 75
Roaming • 103
7
6
S
Safe Use of and Access to Your Phone
switching on/off • 19
unpacking •
126
Safety
5
Phone While Driving 127
Phone while driving 127
Phonebook
information • 124
Safety Guidelines 128
Scheduler • 90
Searching, phonebook • 34
Security, calls • 82
Sent messages, text • 61
copying • 33
editing • 33
erasing • 33
options • 33
Service light • 12, 86
Shortcut, menu • 88
SIM card
installing • 14
SMS (Short Message Service)
Inbox • 60
searching/dialing • 34
speed-dialing • 37
storing • 30
Pictures, downloaded • 116
PIN
changing • 83
description • 121
outbox • 61
Soft keys • 28
164
ꢀ
Sound settings • 75
Sounds, downloaded • 116
Special Precautions 132
Speed-dialing • 37
V
Vibration • 27 76
Voice mail • 69
Voicemail server • 69
Volume, adjust
,
Switching on/off
phone • 19
Symbol mode, text input • 45
keypad tone • 23
ring • 75
Volume, adjusting earpiece • 23
T
T9 mode, text input • 42
Tasks, to do list
W
Waiting call • 50
Wallpaper • 80
WAP browser
,
103
creating • 93
editing • 93
Templates, message • 65
Text input mode • 41
Text message
bookmarks • 111
cache, clear • 113
setting • 112
creating/sending • 63
World time • 97
Writing messages • 63
deleting • 61
,
62
61
reading • 60
setting • 66
Text, enter • 40
Time format • 97
Time, set • 97
To do list • 93
Tone
,
connect • 79
error • 79
folder • 78
keypad • 76
message • 77
minute minder • 79
power on/off • 78
ring • 75
Travel adapter • 17
U
Upper-case characters
entering • 43
User Guide Proprietary Notice 149
ꢀ
165
166
ꢀ
|
