e335
User Guide
Samsung Telecommunications America
1301 East Lookout Drive
Richardson, Texas 75082
1-800-SAMSUNG
www.samsungwireless.com
© 2005 Samsung Telecommunications America. Samsung is a registered trademark of Samsung Electronics
America, Inc. and its related entities. Specifications subject to change without notice.
GH68-06757A
4/2005 Rev.1.1
SGH-E335
P O R T A B L E T r i - B a n d
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UVED1_1.2_WCE335_042605_F4
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating there to (the “Phone
System”),isproprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes,but is not limited to,inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate
the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA),
Inc.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972.761.7000
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http:/ / www.samsungusa.com
©
2005 Samsung Telecommunications America, Inc. is a
registered trademark of Samsung Electronics America, Inc. and
its related entities.
GH68-06757A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITYOF THE PRODUCT OR ITS FITNESSFOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THEPRODUCT.IN ADDITION,SAMSUNG SHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Section 6: Understanding Your Phonebook . . . 59
Storing a Number in the SIM Card . . . . . . . . . . . . . . . . . . 60
Storing a Number in the Phone’s Memory . . . . . . . . . . . . 61
Finding a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . 62
Table of Contents
1
Network Services Settings . . . . . . . . . . . . . . . . . . . . . . . .98
Section 9: Personal Assistant . . . . . . . . . . . . .103
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
2
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . 148
Using Your Phone Near Other Electronic Devices . . . . . . 148
Potentially Explosive Environments . . . . . . . . . . . . . . . . 150
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Table of Contents
3
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . .162
Intellectual Property Statement . . . . . . . . . . . . . . . . . . . .168
Samsung Telecommunications America (STA), Inc. . . . . .169
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
4
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratching or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of reach of small children.
Ifnecessary,switch offthephoneby holding down the
key until the power-off image displays.
Remove the battery. To do so:
1. Slide the battery lock toward the top of the phone and
hold it in that position.
2. Lift the battery away, as shown.
3. Slide the SIM card into the SIM card socket so that the
card locks into place. Make sure the gold contacts of the
card face into the phone.
6
Activating Your Phone
Note: When you need to remove the SIM card, slide it, as shown, and
take it out of the socket.
4. Place the battery so that the tabs on the end align with
the slots at the bottom of the phone.
Section 1: Getting Started
7
5. Press the battery down until it clicks into place. Make
sure that the battery is properly installed before
switching on the phone.
Charging a Battery
Your phoneispowered by a rechargeableLi-ion battery.A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately
200 minutes.
8
Activating Your Phone
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by 1.
pressing the buttons on both sides of the connector and
2. pulling the connector out.
Section 1: Getting Started
9
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Warning
Low Battery” message repeats at regular intervals on the
display. When this happens, your phone turns off the
backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching the Phone On or Off
1. Open the phone.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter the phone password, enter
the password and press the OK soft key or the key.
The password is preset to “00000000” at the factory. For
4. If the phone asks for a PIN, enter the PIN and press the
OK soft key or the key. For further details, see "PIN
Check" on page 94.
The phone searches for your network and after finding it,
the Idle screen appears. Now, you can make or receive
calls.
10
Setting Up Your Voice Mail
Note: The display language is preset to English at the factory. To change
the language, use the Language menu. For further details, see "Language
Settings" on page 93.
5. When you wish to switch off the phone, press and hold
the
key until the power-off image displays.
Setting Up Your Voice Mail
For new users, follow the instructions below to set up
voicemail:
1. In Idle mode, press and hold the
key on the keypad.
You are prompted to enter the password.
2. Follow the tutorial to create a password, a greeting, and
your name.
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
You can access your Voice Mail by pressing the
key on
the keypad or by going to the menu. To access Voice Mail
using the menu:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Messages and press Select soft key or the
key.
3. Highlight Voice mail and press Select soft key or the
key.
4. Highlight Call voice mail and press the key. Your
phone dials the specified voice mail number.
Section 1: Getting Started
11
5. When connected, follow the voice prompts from the
voice mail center.
Changing the Voice Mail Number
Your SIM card gives you the default service number ofthe
voice mail center. However, you may need to change the
number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Highlight Messages and press Select soft key or the
key.
3. Highlight Voice mail and press Select soft key or the
key.
4. Highlight Voice server number and press the Select
soft key or the key. Highlight Empty and press the
Select soft key or the key.
5. Press Edit number to change the number.
6. Press the OK soft key to save the update.
7. Press the
key to return to Idle mode.
12
Section 2: Understanding Your Phone
Topics Covered
•
•
•
•
Features of Your Phone
Front View of Your Phone
Command Keys
Understanding the Display Screen
This section outlines some key features of your phone. It
also displays the screen and the icons that are displayed
when the phone is in use.
Section 2: Understanding Your Phone
13
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of
the features included in your phone.
User friendly,menu driven access to features and options.
• Instant Messaging capability
• Multimedia capability
• Personal Assistant feature provides calendar, to-do list, alarms,
calculator, and conversion capability.
View of Your Phone
The following illustrations show the main elements of
your phone:
14
Keys
Keys
The following list correlates to the illustrations.
1.
2.
The headset jack is used for the hands-free headset.
Performs the functions indicated by the screen text on
the bottom line of the display.
3. During a call, adjusts the earpiece volume.
In Idle mode with the phone open, adjusts the keypad
tone volume. With the phone closed, turns on the
external display when held down.
4. Makes or answers a call.
In Idle mode, recalls the last number dialed or received
when held down.
In Menu mode, selects a menu function or stores
information that you have entered, such as a name in the
phone or SIM memory.
5. In Idle mode, when held down accesses voice mail.
6. Enters special characters. Performs various functions.
7. The microphone used during phone calls and voice
memo recordings.
Section 2: Understanding Your Phone
15
8. Enters numbers, letters, and some special characters.
9. Deletes characters from the display.
In Menu mode, returns you to the previous menu level.
10. Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns the phone
to Idle mode.
11. In Idle mode, launches the WAP (Wireless Application
Protocol) browser.
In Menu mode, selects the highlighted menu options.
12. In Menu mode, scrolls through the menus and
Phonebook.
In Idle mode, the Down key allows you to access the
Phonebook Search menu directly.
When entering text, moves the cursor to the left or right,
depending on which side you push.
13. Display area where text and graphics are displayed.
14. The earpiece is used to listen to audio from your phone.
15. The camera key is used to launch the camera (with a
press and hold) and to take a photo (with a short press).
16. The external display shows the received signal strength,
the phone battery level, the date and time.
17. The service light indicates that the phone is turned on
and is operational.
16
Display Layout
Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
received.
Appears when you set an alarm to ring at a specified
time. For details, see page "Alarm" on page 104.
Appears when a call is in progress.
Appears when the Call Forwarding feature is active. For
details, see page "Call Forwarding" on page 98.
Appears when Alert type is vibration or you set the phone
to vibrate when you receive a call.
Section 2: Understanding Your Phone
17
Appears when Silent mode is active.
Appears when Mute is active.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Backlight
A backlight illuminates the display and the keypad.
When you press any key or open the phone, the backlight
comes on. It goes off when no keys are pressed within a
given period oftime,depending on the setting in the Back
light menu. The display turns off after one minute to
conserve battery power.
To specify the length oftime the backlight is active, set the
Back light menu. See "Backlight" on page 90 for further
details.
External Display
Your phone has an external display on the front of the
phone. It indicates when you have an incoming call or
message. It also alerts you at a specified time when you
have set an alarm. The backlight turns on and the
corresponding icon appears on the external display.
When you close the phone, the display shows the current
time on a digital clock.
Service Light
The service light is on the front of the phone. It flashes
when services are available on the phone.
18
Display Layout
To activate or deactivate the use of the service light, use
the Service light menu. See "Service Light"on page 90for
further details.
Service light
Section 2: Understanding Your Phone
19
20
Section 3: Call Functions
Topics Covered
•
•
•
•
•
•
Making a Call
Adjusting the Call Volume
Answering a Call
Call Log
Silent Mode
Selecting Functions and Options
This section allows you to make or answer a call. It also
includes the features and functionality associated with
making or answering a call.
Section 3: Call Functions
21
Making a Call
When the idle screen displays, enter the area code and
phone number, and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone. See page "Extra Settings"
on page 97 for further details.
Making an International Call
1. Press and hold the 0 key. The + character appears.
2. Enter the country code, area code, and phone number
and press the key.
Correcting the Number
1. To clear the last digit displayed, press the C key.
2. To clear any other digit in the number, press the Left or
Right key until the cursor is immediately to the right of
the digit to be cleared. Press the C key. You can also
enter a missing digit.
3. To clear the whole display, press and hold the C key.
Ending a Call
When you want to finish your call, briefly press the
key.
The phone stores the numbers of the calls you’ve dialed,
received, or missed if the call recipient or caller is
identified. See "Caller ID" on page 101 for further details.
To recall any of these numbers:
22
Making a Call
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the key to display a list of the most recent
numbers used in the order you dialed or received them.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. To dial the number, press the key or the key.
Before you dial the number, you also have the following
options:
•
To see details of the number, press the Options soft key and
select Details. Press the Select soft key or the key.
•
To call back the number, press the Options soft key and select
Call back. Press the Select soft key or the key. The number
is dialed.
•
To send a text or picture message to the number, press the
Options soft key and select Send message. Press the Select
soft key or the key.
• To edit the number, press the Options soft key and select Edit.
Press the Select soft key or the key.
• To delete the number, press the Options soft key and select
Delete. Press the Select soft key or the key.
• To delete all of the numbers, press the Options soft key and
select Delete all. Press the Select soft key or the key.
Making a Call from the Phonebook
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries are
collectively called Phonebook.
Once you have stored a number in the Phonebook, you
can dialit by pressing a few keys.You can alsoassign your
Section 3: Call Functions
23
most frequently-used numbers to number keys using the
Speed Dial feature.
For further details about the Phonebook feature, see
"Dialing a Number from Phonebook" on page 63.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Press the key to increase the volume level and the key
to decrease the level.
In Idle mode, you can also adjust the keypad tone volume
using these keys.
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call image.
24
Call Log
The caller’s phone number, or name if stored in
Phonebook, displays.
1. If necessary, open the phone. Press the key or the
Accept soft key to answer the incoming call.
If the Anykey answer option in the Extra Settings menu
is activated, you can press any key to answer a call
except for the
key and the Reject soft key.
If the Active Flip option in the Extra Settings menu is
activated, you can answer the call simply by opening the
phone.
Note: To reject an incoming call, press and hold the Volume keys on the left
side of the phone before opening the phone, or press the Reject soft key or
the
key.
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
After ending the call, the phone returns to the function screen you were
using.
Call Log
All incoming, outgoing and missed calls are listed in the
Call Log.
1. To access the Call Log option, press the key. A list of
calls displays.
2. Press the Options soft key to see Details, Call back,
Edit, Send message, or Delete the calls.
3. To place a call press the key.
Section 3: Call Functions
25
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you have missed displays on the idle
screen immediately after a call is missed.
To view a missed call immediately:
1. If the phone is closed, open the phone.
2. Press the View soft key.
The number corresponding to the most recent missed call
displays, if available.
3. To scroll through the missed calls, press the Up or Down
key.
4. To call the number displayed, press the key.
5. To edit or delete a missed call number, press the Options
soft key or the key. See below.
Editing a Missed Call Number
When the number corresponding to the missed call is not
available, the Edit number option does not display.
1. Press the View soft key. Press the Options soft key and
select Edit.
2. Change the number and press the Save soft key or the
key.
3. Select a location (SIM or Phone) and press the Select
soft key or the key.
4. Enter a name and press the OK soft key or the key.
26
Silent Mode
5. Press the Options soft key to Send message, Assign
speed dial, Edit name or number, Delete entry, or Copy.
Deleting a Missed Call
1. Press the View soft key. A list of missed calls displays.
2. If necessary, press the Up or Down key to highlight the
missed call and press the Options soft key.
3. Highlight Delete and press the Select soft key or the
key.
4. Select Yes to confirm deletion or No to cancel.
You can press the
Call feature.
key at any time to exit the Missed
Note: You can access the Missed Call feature at any time by selecting the
Missed calls menu.
Silent Mode
Silent mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the key until the “Silent
Mode On” message and the Silent mode ( ) display.
In Silent mode, instead of sounds, your phone will
vibrate, or flash its light, depending on the function and
the situation.
To exit and reactivate the previous sound settings, press
and hold the key again until “Exit Silent Mode”
appears. The Silent mode icon ( ) no longer displays.
Selecting Functions and Options
Section 3: Call Functions
27
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and
sub-menus, accessed using the two soft keys. Each menu
and sub-menu allows you to view and alter the settings of
a particular function.
Soft Keys
The roles of the soft keys vary depending on the function
you arecurrently using;thelabelson thebottom lineofthe
display just above each key indicate their current role.
Menu
Ph.Book
Press the right soft key
Press the left soft key
for Menu mode.
to access the Ph.Book
menu.
28
Selecting Functions and Options
Selecting Options
To view the various functions and options available and
to select the one you want:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted,
press the Select soft key or the key.
3. To view the next function or highlight the next option on a
list, press the Down Navigation key.
4. To move back to the previous function or option on a list,
press the Up key.
5. To move back up one level in the menu structure, press
the key.
6. To exit the menu structure without changing the settings,
press the
key.
In some functions, you may be asked for a password or
PIN.Enter the code and press theOK soft key or the key.
When you access a list of options, your phone highlights
thecurrently active option.If,however,thereareonly two
options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that
you can select it directly.
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Section 3: Call Functions
29
Putting a Call on Hold
You can placethecurrent callon hold whenever you want.
You can make another call while you have a call in
progress if your network supports this service.
To place a call on hold, simply press the Options soft key
then press the Select soft key. You can reactivate the call
whenever you want, by pressing the Resume soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in the Phonebook.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or
1. Press the Options soft key and select Hold.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you may
switch between the two calls, changing the one on hold to
active and placing the other on hold.
To switch between thetwo calls,simply presstheOptions
soft key and select Swap.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with that
person.
When you want to finish, end each call normally by
pressing the
key.
30
Selecting Functions and Options
Switching off the Microphone (Mute)
You can temporarily switch your phone’smicrophoneoff,
so that the other person cannot hear you.
Example: You wish to say something to a person in the room but do not
want the person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key or the key.
2. If necessary, press the Down key to highlight the Mute
option.
3. Press the Select soft key or the key. The other person
can no longer hear you.
To switch the microphone back on:
1. Press the Opt. soft key or the key.
2. If necessary, press the Down key to highlight the
Unmute option.
3. Press the Select soft key or the key. The other person
can hear you again.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1. Press the Spkr on soft key.
2. You will receive the confirmation, Speaker On?
3. Press the Yes soft key.
4. To turn the Speakerphone off, press the Spkr off soft
key.
Section 3: Call Functions
31
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmit the DTMF(DualTone Multi-Frequency)tones of
the keys, which allows you to press keys without hearing
annoying key tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send keys option must be selected.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key or the key.
2. Press the Down key to highlight the Phonebook option
and press the Select soft key or the key.
3. Press the Down key to highlight the Search option and
press the Select soft key or the key.
The Phonebook entries are listed.
4. Enter the name that you wish to find in the textbox
located below the entries.
5. If you enter the first few letters of the name, the
Phonebook entries are listed starting with the first entry
matching your input.
the key.
For further details about the Phonebook feature, see
"Finding a Phonebook Entry" on page 62.
32
Selecting Functions and Options
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call waiting menu to Activate. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
To end a call on hold, press the Options soft key or the
key and select the End held call option.
To end the current call, press the
key.
Making a Multi-Party Call
A multi-party callisa network servicethatallowsup tosix
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key or the key and select Join.
Press the Select soft key or the key.
Section 3: Call Functions
33
4. To add a new person to the multi-party call, call the new
person in the normal way and then press the Options
soft key or the key. Select the Join option and press
the Select soft key or the key.
You can add incoming callers by answering the call and
pressing the Options soft key or the key, and selecting
Join. Repeat as required.
Having a Private Conversation With One Participant
1. Press the Options soft key or the key and choose the
Split option. Press the Select soft key or the key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the Select soft key, the key, or the key.
Now you can talk privately to that person. The other
participants can continue to converse with each other.
3. To return to the multi-party call, press the Options soft
key or the key and select Join. Press the Select soft
key or the key.
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key or the key and choose the
Split option. Press the Select soft key or the key.
The list of call participants appears.
2. Highlight the person you want to keep. Press the Options
soft key and highlight End held call. Press the Select
soft key or the key.
34
Selecting Functions and Options
3. Press the Down key to select the Remove option and
press the OK soft key or the key.
The call with the participant on hold will end, but you can
continue to talk to the other participants.
4. When you want to end the multi-party call, close the
phone or press the
key.
Section 3: Call Functions
35
36
Menu Navigation
You can tailor the phone’s range of functions to your
needs using menus and sub-menus. Menus and sub-
menus can be accessed by scrolling using the Navigation
keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Navigation keys to reach a main menu,
Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Language for
example, you can access them by pressing the Select
soft key or the key.
If the menu that you have selected contains further
options, repeat this step.
4. To scroll through the menus, press the Up or Down
navigation keys.
5. To confirm the chosen setting, press the Select soft key,
or the key.
6. To return to the previous menu level, press the key, or
the
key.
7. To exit the menu without changing the settings, press the
key.
Using Shortcuts
The menu items,such as menus,sub-menus,and options,
are numbered and can be accessed quickly by using their
38
Menu Outline
shortcut numbers. For the main menus, you can access
any one of them by pressing the number keys (1 to 0)
corresponding to their location on the screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the 9 key for Settings.
3. Press the 6 key for Language.
Menu Outline
Thefollowing list showsthemenu structureand indicates
the number assigned to each option.
1. Recent Calls
1.1 Missed Calls
1.2 Calls Received
1.3 Calls Made
1.4 Voice Mail
1.4.1 Connect to Voice Mail
1.4.2 Voice Server Number
1.5 Delete All
1.6 Call Time
1.6.1 Last Call
1.6.2 Total Made
1.6.3 Total Received
1.6.4 Reset Timers
Section 4: Menu Navigation
39
1.7 Data Volume
1.7.1 Recent Volume
1.7.2 Total Volume
1.7.3 Reset Volume
1.8 Data Call Time
1.8.1 Recent Time
1.8.2 Total Time
1.8.3 Reset Timers
2. Messaging
2.1 IM
2.2 Text Message
2.2.1 Create
2.2.2 Inbox
2.2.3 Outbox
2.2.4 Delete All
2.3 Multimedia Message
2.3.1 Create
2.3.2 Inbox
2.3.3 Outbox
2.3.4 Delete All
2.4 Browser Messages
2.4.1 Inbox
2.4.2 Setting
40
Menu Outline
2.4.3 Delete All
2.5 Templates
2.6 Broadcast Messages*
2.7 Chat
2.8 Settings
2.8.1 Text Message
2.8.1.1 Service Center
2.8.1.2
2.8.1.3 Message Type
2.8.1.4 Reply Path
2.8.1.5 Delivery Report
2.8.2 Multimedia Message
2.8.2.1 Send Settings
2.8.2.1.1 Priority
2.8.2.1.2 Validity Period
2.8.2.1.3 Delivery After
2.8.2.1.4 Delivery Report
2.8.2.1.5 Read Reply
2.8.2.2 Receive Settings
2.8.2.2.1 Msg. Reception
2.8.2.2.2 Anonymous Reject
2.8.2.2.3 Ads Reject
2.8.2.2.4 Report Allowed
2.8.2.3 Multimedia Message Profiles
Section 4: Menu Navigation
41
2.8.2.3.1 Current Profile
2.8.2.3.2 Profile Setting
2.9 Memory Status
2.9.1 Text Message
2.9.2 Multimedia Message
3. Games & Applications
3.1 Games
3.1.1 Shop Games
3.1.2 My Games
3.1.3 Settings
3.1.3.1 APN
3.1.3.2 Login ID
3.1.3.3 Password
3.1.3.4 DNS Settings
3.1.4 Memory Status
3.2 Alarm
3.3 Organizer
3.3.1 New Memo
3.3.2 Calendar
3.3.3 To Do List
3.4 Calculator
3.5 Record Audio
3.5.1 Record
42
Menu Outline
3.5.2 Record Audio
3.5.3 Delete All
3.5.4 Settings
3.5.4.1 Recording Time
3.5.4.2 Volume
3.5.4.3 Default Name
3.5.5 Memory Status
3.6 Unit Conversion
3.6.1 Length
3.6.2 Weight
3.6.3 Volume
3.6.4 Area
3.6.5 Tempatrue
3.7 Timer
3.8 Stopwatch
3.9 World Time
4. MEdia Mall
4.1 Shop Ringtones
4.2 Shop Games
4.3 Shop Graphics
4.4 Shop Multimedia
4.5 Shop Applications
4.6 MEdia Home
Section 4: Menu Navigation
43
5. MEdia Net
5.1 MEdia Net Home
5.2 Favorites
5.3 Go to URL
5.4 Browser Profiles
5.4.1 Current Profile
5.4.2 Profile Settings
5.5 Clear Cache
6. IM
7. My MEdia
7.1 Graphics
7.1.1 Shop Graphics
7.1.2 Downloaded Graphics
7.2 Audio
7.2.1 Shop Ringtones
7.2.2 Download Ringtones
7.2.3 Record Audio
7.2.4 Recorded Audio
7.3 Delete
7.3.1 Graphics
7.3.2 Audio
7.4 Memory Status
44
Menu Outline
8. Address Book
8.1 Contact List
8.2 FDN List
8.3 New Entry
8.3.1 Phone
8.3.2 SIM
8.3.3 SIM (FDN)
8.4 Speed Dial
8.5 Copy All to Phone
8.6 Delete All
8.6.1 Photo size
8.6.2 Shutter sound
8.6.3 Default name
8.7 Own Number
8.7.1 Voice Line 1
8.7.2 Voice Line 2
8.7.3 Data
8.7.4 Fax
8.8 Group Setting
8.8.1 Family
8.8.1.1 Ringtone
8.8.1.2 Change Name
8.8.1.3 View Image
8.8.2 Friends
Section 4: Menu Navigation
45
8.8.2.1 Ringtone
8.8.2.2 Change Name
8.8.2.3 View Image
8.8.3 Partnership
8.8.3.1 Ringtone
8.8.3.2 Change Name
8.8.3.3 View Image
8.8.4 Office
8.8.4.1 Ringtone
8.8.4.2 Change Name
8.8.4.3 View Image
8.8.5 Other
8.8.5.1 Ringtone
8.8.5.2 Change Name
8.8.5.3 View Image
8.9 Memory Status
8.0 Service Number
9. Settings
9.1 Time & Date
9.1.1 Set Time
9.1.2 Set Date
9.1.3 Time Format
9.1.4 Auto Update
46
Menu Outline
9.2 Phone Settings
9.2.1 Language
9.2.1.1 Text Language
9.2.1.1 Input Mode
9.2.2 Greeting Message
9.2.3 Extra Settings
9.3 Display settings
9.3.1 Wallpaper
9.3.1.1 Shop Graphics
9.3.1.2 Animations
9.3.1.3 Graphics
9.3.1.4 Text Position
9.3.1.5 Text Color
9.3.2 Skin
9.3.3 Backlight Time
9.3.4 Brightness Control
9.3.4.1 Main LCD
9.3.4.2 External LCD
9.3.5 Dialing Font Color
9.4 Sound Settings
9.4.1 Incoming Calls
9.4.1.1 Shop Ringtones
9.4.1.2 Default Ringtones
9.4.1.3 My Audio
Section 4: Menu Navigation
47
9.4.1.4 Ring Volume
9.4.1.5 Alert Type
9.4.2 Keypad Tone
9.4.2.1 Default Keypad Tone
9.4.2.2 Volume
9.4.3 Message Tone
9.4.3.1 Text Message
9.4.3.2 Multimedia Message
9.4.4 Power On/Off
9.4.5 Silent Mode
9.4.6 Extra Tone
9.5 Network Services
9.5.1 Call Forwarding
9.5.1.1 Forward Always
9.5.1.2 Busy
9.5.1.3 No Reply
9.5.1.4 Unreachable
9.5.1.5 Cancel All
9.5.2 Call Waiting
9.5.3 Network Selection
9.5.4 Caller ID
9.6 Security
9.6.1 PIN Check
48
Menu Outline
9.6.2 Change PIN
9.6.3 Phone Lock
9.6.4 Change Password
9.6.5 Privacy
9.6.6 SIM Lock
9.6.7 FDN Mode
9.6.8 Change PIN2
* Shows only if supported by your SIM card.
Section 4: Menu Navigation
49
50
Section 5: Entering Text
Topics Covered
•
•
•
•
•
Changing the Text Input Mode
Using T9 Mode
Using ABC mode
Using Symbols
Using Numbers
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes
associated with entering text.
Section 5: Entering Text
51
Changing the Text Input Mode
When using your phone,you willoften need to enter text,
such as when storing a name in your Phonebook,creating
your personal greeting or scheduling events on your
calendar. You can enter alphanumeric characters by
using your phone’s keypad.
Your phone has the following text input modes:
• ABC mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want.
• T9 mode: this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing the 5 key can enter J, K, or L.
However, the T9 mode automatically compares the series of
keystrokes you make with an internal linguistic dictionary to
determine the most likely word, thus requiring far fewer
keystrokes than the traditional ABC mode.
• Symbol mode: this mode allows you to enter symbols, such as
punctuation marks.
• Number mode: this mode allows you to enter numbers.
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Example: Writing a text message.
52
Using T9 Mode
Text input mode
indicator
1. To change the text input mode, press the
key.
2. Choose from the following options:
: ABC mode
: T9 mode
: Number mode
3. Highlight the input option, and press the Select soft key
or the key.
Using T9 Mode
T9 is a predictive text input mode that allows you to key
in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once for
each letter.
Example: To enter “Hello” in T9 mode, press the 4,3,5,5, and 6 keys.
Section 5: Entering Text
53
The word that you are typing appears on the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the 0 key to
display alternative word choices for the keys that you
have pressed.
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays
the most commonly used choice first.
4. Insert a space by pressing the key and start entering
the next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the 0 key to display the alternative
words.
2. When you press the 0 key at the last alternative word,
Spell soft key or the key.
3. Enter the word you want to add using ABC mode. See
page "Changing the Text Input Mode" on page 52.
4. Press the OK soft key or the key.
The word is added to the T9 dictionary and becomes a
word for the associated keypress series.
54
Using ABC mode
Note: This feature may not be available for some languages.
• To enter periods, hyphens, or apostrophes, press the 1 key. T9
mode applies grammar rules to ensure that correct punctuation
is used.
• To shift case in T9 mode, use the key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To
delete letters, press the C key. Press and hold the C key to
clear the display.
Using ABC mode
To use ABC mode, use the 1 to 0 keys to enter your text.
1. Press the key labeled with the letter you want:
• - Once for the first letter
• - Twice for the second letter
• - And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
Section 5: Entering Text
55
Using Numbers
Symbol mode enables you to insert symbols and
punctuation marks into text.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Up or Down
Navigation key.
3. To clear the symbol(s), press the C key. When the input
field is empty, this key returns the display to the previous
mode.
4. To insert the symbol(s) into your message, press the OK
soft key or the key.
Using Numbers
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Section 5: Entering Text
57
58
Section 6: Understanding Your
Phonebook
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
Storing a Number in the SIM Card
Storing a Number in the Phone’s Memory
Finding a Phonebook Entry
Dialing a Number from Phonebook
Speed Dialing
Dialing a Number from SIM Card
Copying all SIM Phonebook Entries
Deleting all of the Phonebook Entries
Finding My Phone Number
Using the Service Dialing Numbers
Checking the Memory Status
This section allows you to manage your daily contacts by
storing their name and number in your Phonebook.
Phonebook entries can be sorted by name,entry,or group.
Section 6: Understanding Your Phonebook
59
Storing a Number in the SIM Card
1. At the Idle screen, press the Ph.Book soft key.
2. Scroll to New entry by pressing the Up or Down key and
press the Select soft key or the
key.
3. Highlight the SIM option, by pressing the Up or Down
key and press the Select soft key or the key.
4. Enter a number you want to store and press the Save
5. Enter a name and press the OK soft key or the
key.
For further details about how to enter characters, see
"Using ABC mode" on page 55.
After storing, the phone displays the Phonebook entry
number you just created.
6. To use the entry options, press the Options soft key.
The following options are available:
number.
• Assign speed dial: allows you to assign a speed dial number to
the phone number you entered. For more information, see
"Speed Dialing" on page 63.
• Edit number: allows you to edit the number.
• Edit Name: allows you to edit the name.
• Delete entry: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key.
• Copy to Phone: allows you to copy the number to your phone.
7. To return to the Idle screen, press the
key.
60
Storing a Number in the Phone’s Memory
Storing a Number in the Phone’s Memory
1. At the Idle screen, press the Ph.Book soft key.
2. Scroll to New entry by pressing the Up or Down key and
press the Select soft key or the key.
3. Select the Phone option by pressing the Up or Down key
and press the Select soft key or the key.
4. Select a number Type by pressing the Up or Down key,
and press the Select soft key or the key.
The following types are available:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the
entry.
• E-mail: allows you to enter an e-mail address for the number
entered.
5. Enter the number you want to store and press the Save
6. Enter a name and press the OK soft key or the key.
For further details about how to enter characters, see
"Using ABC mode" on page 55.
After storing, the phone displays the Phonebook entry
and name you just created.
7. To use the entry options, press the Options soft key. The
following options are available:
Section 6: Understanding Your Phonebook
61
• Send message: allows you to send a text or picture message
for the selected Phonebook entry.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Edit number: allows you to edit the number.
• Edit Name: allows you to edit the name.
• Delete entry: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key.
• Copy to SIM: allow you to store the number on your SIM card.
8. To return to the Idle screen, press the
key.
Finding a Phonebook Entry
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Depending on your particular SIM card, the maximum
number of phone numbers the SIM card can store may
differ.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Press the Select soft key or the
key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name.
The Phonebook entries are listed, starting with the first
entry matching your input.
4. To view the highlighted entry, press the View soft key.
62
Dialing a Number from Phonebook
5. To select a different entry, press the Up or Down
Navigation key until the entry you want is highlighted.
6. Once you have found the entry, press the key to dial
the number, or press the Options soft key to access the
Phonebook entry options.
Dialing a Number from Phonebook
Once you have stored phone numbers in the Phonebook,
you can dialthem easily and quickly by using the location
Note: If you cannot remember a location number, you must go into the
Search menu in the Phonebook menu to search for the entry by name. For
details, "Finding a Phonebook Entry" on page 62.
Speed Dialing
Once you have stored phone numbers from your
Phonebook list, you can set up to 8 speed dial entries and
then dial them easily whenever you want, simply by
pressing the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys
(2 to 9), press and hold the appropriate key.
Setting Up Speed Dial Entries
1. When the Idle screen displays, press the Ph.Book soft
key.
2. Scroll to Speed dial by pressing the Up or Down key and
press the Select soft key or the key.
Section 6: Understanding Your Phonebook
63
3. Select the key to which you wish to assign the speed-
dialing number, from the 2 to 9 keys, and press the
Select soft key or the key.
Note: Memory location 1 is reserved for your Voice mail server number.
4. Choose from the following options:
• Edit number: allows you to change the number you’ve assigned
to this speed dial number.
• Edit name: allows you to enter or change the name you
assigned to the speed dial number.
• Delete: allows you to delete the name and number you’ve
assigned to the speed dial number.
Editing a caller group
1. When the idle screen displays, press the Ph.Book soft
key.
2. Scroll to Group settings by pressing the Up or Down
key and press the Select soft key or the key.
3. Scroll through the group list by pressing the Up or Down
key.
4. When the group you want highlights, press the Select
soft key or the key.
5. Select each option and change the settings, as required.
The following options are available:
• Melody: allows you to set the ring tone to be used when you
receive a voice call from a member of that group.
• Edit name: allows you to change the name of the group.
• View image: allows you to view the image for that group.
64
Dialing a Number from the SIM Card
6. When you are finished, press the C key or the
key.
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number for the phone
number you want to dial and press the key.
The entry associated with the location number will be
displayed.
2. You can press the Up or Down key to find other numbers
on the list.
3. Press the Dial soft key, the
key, or the key when
you have selected the number you want.
Copying all SIM Phonebook Entries
You can copy all SIM entries to the Phone using this
option. When you copy entries to the phone, duplicate
entries are created.
1. Press Ph. Book soft key.
Note: Options are available for phone entries that are not available when
stored to the SIM card. For details see "Storing a Number in the Phone’s
Memory" on page 61.
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s
memory, your SIM card, or both.
1. When the idle screen displays, press the Ph.Book soft
key.
Section 6: Understanding Your Phonebook
65
2. Scroll to Delete all by pressing the Up or Down key and
press the Select soft key or the key.
3. To place a check mark by the memory location you want
to empty, All, SIM, or Phone, press the key.
You can remove the check mark by pressing the key.
4. Press the Delete soft key to delete the entries in the
selected memory location.
5. When the confirmation message appears, press the Yes
soft key or the key.
6. To cancel the deletion, press the No soft key.
7. When you are finished, press the C key or the
key.
Finding My Own Phone Number
This function is a memory aid,which you can use to check
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any affect the actual subscriber numbers on your SIM
card.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Select the Own number option by pressing the Up or
Down key and press the Select soft key or the key.
66
Using the Service Dialing Numbers
3. Highlight the Empty option and press the Select key or
the key. Highlight the Edit number option and press
the Select soft key or the key. Your phone number is
displayed. You may edit the number if you wish. Press
the OK soft key or the key.
4. To edit the Name, highlight the Edit name option and
press the Select soft key or the key. Edit the name
and press the OK soft key or the key.
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN)
assigned by your service provider. These numbers
include emergency numbers, directory inquiries and
voice mail numbers.
1. When the idle screen displays, press the Ph.book soft
key.
2. Select the SDN option by pressing the Up or Down key
and press the Select soft key or the key.
3. Scroll through the numbers by using the Up or Down
key.
4. To dial the number displayed, press the Dial soft key or
the key.
Note: This menu is available only when your SIM card supports Service
Dialing Numbers.
Checking the Memory Status
Section 6: Understanding Your Phonebook
67
You can check how many names and numbers are stored
in the Phonebook, in both SIM card and the phone
memory. You can also see the capacity of both memories.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Select the Memory status option by pressing the Up or
Down key and press the Select soft key or the key.
3. When you are finished, press the
soft key or the
key.
68
Section 7: Messaging
Topics Covered
•
•
•
•
•
•
Types of Messages
Message Alerts
Retrieving New Messages
Voicemail
Deleting Messages
Instant Messaging
This section allows you to send or receive different types
ofmessages.Italsoincludesthefeaturesand functionality
associated with messaging.
Section 7: Messaging
69
Types of Messages
Your phone provides the following message types:
• Voice Messages
• Text Messages
• Picture Messages
• Browser Messages
• Voice Mail Messages
• Broadcast Messages (SIM Dependent)
Voice messages
In this menu, you can record a voice message of up to 1
minute and then immediately send it by a MMS
(Multimedia Message Service) message. MMS will be
referred to as Picture Messaging.
When you access this menu,a timer appears on the screen.
1. Press the Record soft key to start recording.
2. Record a memo by speaking into the microphone.
The display shows the elapsed time and the remaining
time at one time.
3. When you are finished, press the Stop soft key or the
key. Or, when the recording time is expired, the display
switches to the next screen.
Note: If the recording time expires and you do not designate a destination
target for the voice message, it will be saved in a voice file named
Voicemsg.amr. The next time the recording time expires without a
70
Voice messages
destination target being designated, the Voicemsg.amr file will be
overwritten.
4. Press the Select soft key or the key to choose from
the following options:
• Recent log: allows you to select a number or an address from
the 5 last destinations you entered for sending the last
messages.
• Phonebook: allows you to retrieve a number from your
Phonebook.
• Phone number: allows you to enter the phone number you
want.
• E-mail address: allows you to enter the e-mail address of the
recipient.
Note: You can access the following options by pressing the Options soft
key:
• Replay: plays back your voice memo.
• Re-record: discards the voice memo and enables you to record
another one.
• Send: allows you to send the voice memo.
• Default destination: allows you to send the voice message
directly without entering another destination. To select a default
destination, press the Select soft key and select from the
available options.
• Save: saves the voice message and continues to the send
options.
5. Enter a number or an e-mail address, or select a
destination from the Phonebook or Recent log list.
Highlight a selection and press the Select soft key.
Section 7: Messaging
71
6. Highlight the correct number or address and press the
Select soft key or the key.
7. Highlight the correct number or address and press the
Send soft key or the key to send the message.
Your phone sends the message. After sending, the
message is saved in the Outbox in the Picture messages
menu.
Note: You can save a voice message without sending it. After recording
your message, press the soft key and you will receive the Save?
prompt. Press the Yes soft key.
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include
simple pictures, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon ( ) appears, you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
Create
In this menu, you can write and send a text message.
Creating a Simple Text Message
1. Create your message.
72
Text Messages
You can create a message using standard Alphabet
the setting in the Character support menu.
Notes: For further details about entering characters, see "Using ABC
mode" on page 55.
You can enter up to 160 standard Alphabet characters in your message.
When you enter text using Uni-code characters, the maximum number of
characters that can be in a message is reduced to 70.
2. When you finish entering your message, press the
Options soft key or the key. The following options are
available:
deleted after sending.
• For more information about Text formatting, Add content, or
Templates, see "Creating a Message Using Options" on page
73.
• Save message: allows you to save a copy of the message to
the Phone or SIM card.
3. Select Send and press the Select soft key or the key.
Note: When the phone fails to send the message, it asks you if you want to
retry. Press the OK soft key to confirm. Otherwise, press the Exit soft key to
return to the message screen.
Creating a Message Using Options
1. Create your message.
2. Press the Options soft key or the key.
Section 7: Messaging
73
3. Select one of the following options by using the Up and
Down keys and pressing the Select soft key or the
key.
• Text formatting: allows you to format the style of the text.
For the Size attribute, Normal, Large, and Small size are
available. Mode options are Normal, Underline, and
Strikethrough. Alignment options are Left, Center, and Right.
The attributes can be combined.
• Add content: allows you to add a picture, melody, or animation
to your message. Select the category of the item to be added.
In each category, you can select from the various factory-set
items or choose an item received from other sources, such as
the Internet or other phones.
Note: When you add media items to a message, the number of characters
you can enter decreases.
• Templates: allows you to apply one of the preset message
templates to the text. Select one of the 4 items stored in the
Templates menu.
4. Complete the message, and select Send or Save
message.
Inbox
This message box is used to store messages that you have
received.
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if
available in your Phonebook.
1. Select a text message from the list and press the Select
soft key or the key to read the message contents.
74
Text Messages
2. To scroll through the contents, press the Up or Down
key.
3. To scroll to the previous or next message, press the Left
or Right Navigation keys.
While reading a message, you can choose the following
options by pressing the Options soft key:
• Text reply: allows you to send a reply to the sender by sending a
text message.
• Call back: allows you to call the sender.
• Delete: allows you to delete the message.
• Save address: allows you to extract the sender’s number and
text, so that you can save them in your phone’s memory.
• Forward: allows you to send/resend the message. For further
information about how to send a message, see "Create" on
page 72.
• Select content: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a message.
• Move to phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
• Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
Outbox
This message box is used to store messages that you have
sent or will send.
Section 7: Messaging
75
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
1. Select a text message from the list and press the Select
soft key or the key to read the message contents.
2. To scroll through the contents, press the Up or Down
Navigation key.
3. To scroll to the previous or next message, press the Left
or Right Navigation key.
While reading a message, you can choose the following
options by pressing the Options soft key:
• Delete: allows you to delete the message.
text, so that you can save them in your phone’s memory.
• Send: allows you to send/resend the message. For further
page 72.
• Forward: allows you to send/resend the message. For further
information about how to send a message, see "Create" on
page 72.
• Move to phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
• Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
76
Picture Messages
Delete All
This menu allows you to delete all of the text messages in
each messagebox.You can alsodeleteallofyour messages
at one time.
1. To select a text message box to clear, press the Up or
Down key. To delete all of your messages, select All
messages.
2. To place or remove a check mark, press the key.
3. Press the Delete soft key to delete the marked objects.
4. When the phone asks for confirmation again, press the
Yes soft key.
Picture Messages
This menu allows you to use the Multimedia Message
Service.
Picture Messaging is a messaging service that provides
delivery ofpersonal multimedia messages from phone to
phone or from phone to e-mail.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics,
voice,and audio clips. Picture Messaging is a multimedia
presentation in a single file. It is not a text file with
attachments.
Using the Picture Messaging feature, your phone can
receive and send messages that contain multimedia files,
such as photos, sounds and images you downloaded
from the Internet and voice memos you recorded. This
function is available only if it is supported by your service
Section 7: Messaging
77
provider. Only phones that offer multimedia messaging
features can receive and display multimedia messages.
Create
This menu allows you to create a new multimedia
message and send to one or multiple destinations.
Creating and Sending a Multimedia Message
1. When you highlight Subject, press the Add soft key or
the key.
key or the key.
Note: For more information about entering characters, see "Using ABC
mode" on page 55.
3. To add a picture, highlight the Picture option and press
the Add soft key or the key. Press the Opt. soft key for
the following options:
• Send: sends the Picture Messaging message.
• Preview: allows you to see the message before you send.
• Add page: allows you to add another page for the Picture
Messaging message.
• Page timing: page timing allows you to set how long each page
of the Picture Messaging message is displayed. The default
time is 5 seconds, maximum 99 seconds.
• Text effect: allows you to change the color, size, and style of the
Picture Messaging text.
• Clear picture: allows you to remove the selected picture.
• Delete page: allows you to delete the page selected.
78
Picture Messages
• Save message: allows you to save the Picture Messaging
message.
4. To change the text or replace the image or sound with
another one, select a category and press the Opt. soft
key. Depending on the category selected, highlight Clear
picture/sound/message/subject to remove the item.
5. When you have finished creating the message, press the
Opt. key and choose Send. Press the Select soft key or
the key.
6. Choose one of the following options and press the Select
soft key or the key:
• Recent log: allows you to select a number or an address from
the 5 last destinations you entered for sending the last
messages.
• Phonebook: allows you to enter the phone number you want.
• Phone number: allows you enter a phone number or choose
one from the Ph.Book.
• E-mail address: allows you to enter the e-mail address of the
recipient.
• My Album: allows you to send the message to the My Album
folder.
• My Journal: allows you to send the message to My Journal.
7. Press the Send soft key to send the message. Your
phone sends the message.
Inbox
Viewing a Message When You Receive It
When a new multimedia message comes in, the display
shows the Picture Messaging icon.
Section 7: Messaging
79
1. Press the View soft key or the key to view brief
information about the message, such as the sender’s
number, the message size and the subject. Press the
Select soft key to view the message.
If you want to view the message later in the Inbox, press
the Exit soft key.
2. To scroll through the message information, press the
Right or Left Navigation key.
3. Press the Opt. soft key or the key to access the
following options:
• Reply: allows you to create a message and reply to the sender.
• Replay: if there are multiple screens to this message, allows
you to replay the message from the beginning.
• Delete: deletes the message.
• Forward: allows you to forward this message to another
destination.
• Call back: allows you to dial the number from which this
message was sent.
• Use content: allows you to use the contents of this message
(picture or sound) to send to another destination in a different
message.
• Save address: allows you to store the address from which this
message was sent. You can also reply to the message from
this option.
• Properties: shows you information about the message, such as
the subject, sender’s e-mail address or phone number,
message size, recipient’s e-mail address or phone number, its
priority, and the time and date the message was received.
4. When you are finished, press the
key.
80
Picture Messages
Viewing a Received Message in the Inbox
When you access the Inbox menu, a list of multimedia
messages you received displays along with the message
subjects. The icons on the left tell you the status of the
messages.
Picture Messaging notifications that have been opened.
Picture Messaging notifications that have not been opened.
1. .Select a message on the list and press the Select soft
key or the key.
The message displays and scrolls to the next page, if it
has one, after a specified time.
2. To scroll through the message, press the Left or Right
Navigation key.
While viewing a message, you can choose the message
options by pressing the Opt. soft key.
Outbox
When you access this menu, the list of multimedia
messages that you have sent or saved displays. The icons
on the left tell you the status of each message:
Messages sent
Messages currently being sent
Messages your phone couldn’t send
Messages to be sent
Messages deferred
1. Select a message on the list and press the Select soft
key or the key.
Section 7: Messaging
81
The message displays and scrolls to the next page, if it
has more, after a specified time.
2. To scroll through the message, press the Up or Down
Navigation key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right
Navigation keys.
While viewing a message, you can choose the following
options by pressing the Options soft key:
• Delete: allows you to delete the message.
• Replay: allows you to replay the message from the beginning.
• Send: allows you to send/resend the message.
• Properties: shows you information about the message, such as
the time and date, to (recipient number), size, priority, and
class.
Draft
After creating a multimedia message, you can store it in
this message box to be sent at a later time.
Delete All
This menu allows you to delete all of the multimedia
messages in each message box separately. You can also
delete all of your messages at one time.
1. To select Picture messages to clear, press the Up or
Down key.
2. Highlight the message box. Press the Select soft key or
the key. To delete all of your messages, select All
messages.
82
Browser Messages
3. To remove a check mark, press the key.
4. To delete the marked messages, press the Delete soft
key. When a confirmation message displays, press the
Yes soft key to confirm.
Browser Messages
This menu allows you to receive web messages from the
server, or to set the phone not to receive Web messages.
The following options are available:
• Inbox: allows you to read the messages received from the web
server.
• Receive: allows you to set whether or not your phone receives
web messages.
• Delete all: allows you to delete all of the web messages.
Voice Mail
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
The following options are available:
• Call voice mail: before using the Voice Mail feature, you must
enter the voice server number obtained from your service
provider. You can then select this option and press the OK soft
key or the key to listen to your messages.
You can connect to the voice server by pressing and holding
the 1 key in Idle mode.
• Voice server number: allows you to change the voice mail
server number, if necessary.
Note: Voice mail is a network feature. Please contact your service provider
for further details.
Section 7: Messaging
83
Broadcast Messages (SIM Dependent)
This network service allows you to receive text messages
on various topics, such as the weather or traffic.
Please contact your service provider for further details.
Settings
In this menu, you can set up default text message and
picture message information. The last setting you
accessed is automatically activated for sending
subsequent messages.
Text Messages
• Service center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
• Validity period: allows you to set the length of time your text
messages are stored at the message center while attempts are
made to deliver them.
• Message type: allows you to view the type of message sent.
• Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
• Delivery report: allows you to activate or deactivate the report
function. When this function is activated, the network informs
you whether or not your message has been delivered.
• Character support: allows you to select a character encoding
type, either GSM-alphabet, Uni-code, or Automatic. If you
select Automatic, the phone automatically changes the
encoding type from GSM-alphabet to Uni-code when you enter
a Uni-code character.
84
Settings
When you select Uni-code, the maximum number of
characters which can be in a message is reduced to
approximately half. If your recipient’s phone does not
support Uni-code characters, he/ she may not be able to
read your message correctly.
Note: If your phone doesn’t have the Character support menu, the phone
provides the Automatic character encoding by default.
Picture Messages
The following options are used to set Send and Receive
settings for Picture messages.
Send Settings
• Priority: you can select the priority level of your messages.
• Validity period: set the length of time your messages are
stored in the message center while the network attempts to
deliver them.
• Delivery after: you can set a delay time before the phone sends
your messages.
• Delivery report: when this option is enabled, the network
informs you whether or not your message has been delivered.
• Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Receive Settings
• Msg. reception: you can set your phone to automatically
receive or reject incoming messages.
• Ads reject: you can set your phone to automatically reject or
receive advertising messages.
• Report allowed: you can set the option to receive a delivery
report.
Section 7: Messaging
85
Section 8: Changing Your Settings
Topics Covered
•
•
•
•
•
•
•
•
•
•
Time & Date Settings
Display Settings
Sound Settings
Get MoreHelp
Greeting Message Settings
Language Settings
Security Settings
Extra Settings
Reset Settings
Network Services Settings
This section explains the sound and phone settings for
your phone.It includes display settings,security settings,
and extra settings associated with your phone.
Section 8: Changing Your Settings
87
Time & Date
This menu allows you to change the current time and date
displayed. You can also find out what time it is in another
part of the word.
The following options are available:
• Set date: allows you to enter the month, day, and year.
• World time: allows you to find out what time it is another part
of world, using the Left and Right Navigation keys.
Note: Before setting the time, you must specify your time zone in the
World time menu.
The screen shows the:
• city name.
• current time and date.
• city selected as your time zone.
To select your time zone:
1. Select the city corresponding to your time zone by
pressing the Left or Right key one or more times. The
local time and date display.
2. Press the Set soft key or the key.
• Set time: allows you to enter the current time.
• Time format: allows you to change the time format to 12
hours or 24 hours.
• Auto update: allows you to receive time information from
your service provider’s network.
• Off: you need to manually set the time and date according to
the current time zone using the Set time menu.
88
Display Settings
• On: the phone automatically updates the time and date
according to the current time zone using the network service.
• Confirm first: the phone asks for a confirmation before the
update.
Note: Automatic updates of time and date do not change the time you
have set for alarm settings or calendar memos.
Display Settings
In this menu, you can change various settings for the
display or backlight.
Wallpaper
This menu allows you to change the background image or
the color of the text to be displayed in Idle mode.
The following options are available:
• Animations: you can select a background image to be displayed
on the idle screen.
• Get More Wallpapers: You can also select any images
downloaded from the Internet, t-zones, and optional EasyStudio
1.0 program or received in messages.
• My photos: you can select a background from the photos you
have taken.
• Images: you can select a background from the phones
preloaded images.
• Text color: you can select the phone’s display text color and
shading.
To change the background image:
1. Scroll through the list by pressing the Left or Right key.
You have various preset images available.
Section 8: Changing Your Settings
89
2. Press the Select soft key or the key when the image
you want highlights.
Interior Display
You can select the color of the menus displayed.
Backlight
In this menu, you can select the length of time the
backlight is on and the phone is in Dimming mode.
Settings available are: 15 seconds, 30 seconds, 1 minute, 3
minutes, and 10 minutes.
Brightness Control
You can adjust the display brightness for the Main LCD
and the Front LCD to see it better in different lighting
conditions.
Press the Up or Down Navigation key or press the
Volume keys to adjust the brightness.
Service Light
This menu allows you to select whether or not the service
light is used. If you do not want to use the service light,
select Off.
Sound Settings
You can customize various sound settings.
My MegaTones
This menu displays the different ringtones you have
downloaded from the internet.
90
Sound Settings
Get More MegaTones
This menu allows you to download different ringtone
melodies from the internet. To enable a downloaded
ringtone, use the Ringtone option.
Ringtones
This menu allows you to select a ring melody.
You can choose between many different melodies.
Ring Volume
This menu allows you to adjust the ring volume to one of
5 levels.
Use the Up and Down keys or the Volume keys on the left
side of the phone to increase or decrease the volume.
Alert Type
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
• Melody: the phone rings using the ring melody selected in the
Ringtone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then melody: the phone first vibrates 3 times and then
starts ringing.
• Light only: the service light flashes; the phone neither rings nor
vibrates.
Keypad Tone
This menu allows you to select the tone that the phone
sounds when you press a key.
Section 8: Changing Your Settings
91
To turn off the sound, select Off.
Message Tone
This menu allows you to set up the ringer for incoming
messages, text messages, and multimedia messages.
Power On/Off
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn off the sound, select Off.
Alerts on Call
This menu allows you to choose whether or not the phone
informsyou when you receivea new messageor when the
time for an alarm comes during a call.
The following options are available:
• Off: the phone doesn’t actively alert you to incoming messages
or alarms. It only displays the corresponding notification.
• On: the phone alerts you with a beep and displays the
corresponding notification.
Extra Tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the Select soft key or the
key. A check mark displays in front of the option.
2. To turn a given tone off, press the Select soft key or the
key. The check mark no longer displays in front of the
option.
The following options are available:
92
Get More Help
• Indicative tones: sets whether or not the phone informs you
when you have made a mistake.
• Minute minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
• Connect tone: sets whether or not the phone beeps when your
call is connected to the system.
Get More Help
This menu is provides online help for your phone. You
may browse general help topics, or enter specific search
topics.Information located on this site is maintained by T-
Mobile.
Greeting Message Settings
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
For details about entering characters, see "Using ABC
mode" on page 55.
Language Settings
This menu allows you to select a display languagefor Text
language and Input mode. Choose from English, French,
and Spanish.
Security Settings
The Security feature enables you to restrict the use ofyour
phone by the others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
Section 8: Changing Your Settings
93
PIN Check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN Check feature is enabled.You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see "Change Password" on
page 95.
Once the correct password has been entered, you can use
the phone until you switch it off.
94
Security Settings
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
• Enable: you are required to enter the phone password when
you switch on the phone.
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
Privacy
Using this menu, you can lock your media contents, such
as picture messages, Voice messages, Voice memos,
images, sounds, and My Photos. Once you have locked
the contents, you must enter the phone’s password to
access the associated menus.
1. To select an item to lock, press the Up or Down key. To
lock all of the contents, select All.
2. To place a check mark, press the key.
3. To remove a check mark, press the key.
4. To lock the marked items, press the OK soft key.
5. Enter a password and press the OK key.
When the phone asks for the password, enter the
password and press the OK soft key or the key.
Section 8: Changing Your Settings
95
Note:The password is preset to “00000000” at the factory.
To change this password,see "Change Password"on page
95.
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code to unlock the SIM so you can use a different SIM card.
Once you have entered the lock code, you are asked to
confirm your entry.
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook.
You must enter your PIN2. The following options are available:
• Full length entries or wild cards can be entered in to the FDN
list.
• A full length number with a specific contact name can be
entered into the FDN list.
• Wildcard entries allow a range of numbers to be dialed with a
single entry: ex. 555 – All dialed numbers that begin with 555
will be allowed. Numbers that do not match the conditions in
the FDN list will be restricted. Note: Entering an asterisk (*) is
not required for wild card entries.
96
Extra Settings
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Extra Settings
You can turn the automatic redialing or answering
features on or off.
1. To turn a feature on, press the Select soft key or the
key. A check mark displays in front of the option.
2. To turn a feature off, press the Select soft key or the
key. The check mark no longer displays.
The following options are available:
Note: The interval between call attempts varies.
• Auto redial: when this option is checked, the phone makes up to
ten attempts to redial a phone number after an unsuccessful
call.
• Active Flip: when this option is checked, you can simply open
the phone to answer a call. When it is unchecked, you must
open the phone and press a key to answer a call, depending on
the setting of the Anykey answer option. See below.
• Anykey answer: when this option is checked, you can answer
an incoming call by pressing any key, except the
key or the
Section 8: Changing Your Settings
97
Reject soft key. To reject the call, press the
key or the
Reject soft key. When this option is unchecked, you must press
the key or Accept soft key to answer a call.
Reset Settings
From this menu you can reset your phone and sound
settings to the default settings.
The following options are available:
• Sound settings: only sound settings will be returned to
default values.
• Phone settings: only phone settings will be returned to
default values.
• All settings: Both sound and phone settings will be returned
to default values.
To reset your phone settings:
1. Highlight one of the options and press the Select soft key
or the key.
2. You will be prompted with Reset settings?. Press the
Yes soft key.
3. Enter the 4- to 8-digit password and press the OK soft
reset confirmation message.
The password is preset to “00000000.” To change this
password, see "Change Password" on page 95.
Network Services Settings
Call Forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
98
Network Services Settings
Example: You may wish to forward your business calls to a colleague
while you are on holiday.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down key and then press the Select soft key or the
key.
The following options are available:
• Forward always: all calls are forwarded.
• Busy: calls are forwarded when you are already on another call.
• No reply: calls are forwarded when you do not answer the
phone.
• Unreachable: calls are forwarded when you are not in an area
covered by your service provider or when your phone is
switched off.
• Cancel all: all call forwarding options are canceled.
2. Select the type of calls, voice or data, by pressing the Up
or Down key, and then press the Select soft key or the
key.
The current status displays. If the option has already
been set, the number to which the calls are forwarded
displays.
3. To activate call forwarding, press the Activate soft key.
Go to step 6.
4. To change the number to be called, press the Change
soft key. Go to step 6.
5. To deactivate call forwarding, press the Remove soft
key.
Section 8: Changing Your Settings
99
6. Enter the number to which the calls are to be forwarded
and press the OK soft key or the key.
To enter an international code, press the 0 key until the
+ sign displays.
7. When you select No reply in step 1, select the length of
time the network waits for before forwarding a call.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Call Waiting
Thisnetwork serviceinformsyou when someoneistrying
to reach you during another call.
You can specify individual call waiting options for voice
calls and/ or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which the call
waiting option is to be applied by pressing the Up or
Down key and then press the Select soft key or the
key.
The screen informs you whether call waiting is activated
or deactivated.
2. You can activate or deactivate the Call Waiting feature
using the Activate or Deactivate soft key respectively.
3. To return to the previous screen, press the Exit soft key.
Network Selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
100
Network Services Settings
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
To change Network Selection mode:
1. Press the Up or Down key until the appropriate option
highlights, then press the Select soft key or the key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, go to step 2.
2. Press the Up or Down key until the network you want
highlights and then press the Select soft key or the
key.
The phone will scan for that network and you will be
connected.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide number: your number does not display on the other
person’s phone.
• Send number: your number is sent each time you make a call.
Section 8: Changing Your Settings
101
Band Selection
This menu option provides the ability to set the band for
your phone. Choose from GSM 850/ 1900, GSM 1800, or
Automatic.
102
Section 9: Personal Assistant
Topics Covered
•
•
•
•
•
•
•
•
Alarm
Calendar
Calculator
ToDoList
Voicememo
Conversion
Timer
Stopwatch
The topics covered in this section allow you to schedule
appointments, view the calendar, create To-Do lists, set
an alarm, and perform simple math calculations.
Section 9: Personal Assistant
103
Alarm
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm
even if the phone is switched off.
The following options are available:
• Wake-up Call: the alarm rings to wake you up in the morning.
• Alarm1: set the day, time, and tone for this alarm.
• Alarm2: set the day, time, and tone for this alarm.
• Auto power: alarm rings at the specified time even if the phone
is turned off. If the option is set to Disable and the phone is
switched off at the specified time, the alarm does not ring.
To set the alarm:
1. Choose the type of alarm to be set and press the Select
soft key or the key.
2. Press the Options soft key to choose from the following
options:
• Alarm day: select the days of the week for the alarm.
• Alarm time: enter the time for the alarm.
• Alarm tone: select an alarm melody.
• Remove alarm: removes the set alarm.
3. Highlight Alarm day and press Select soft key or the
key. Select the days that you want the alarm to sound
using the Select soft key. Press the OK soft key to save.
104
Calendar
4. Highlight the Alarm time and press the Select soft key
or the key. Enter the time and press the OK soft key or
the key. Select AM or PM and press the Select soft
key or key.
5. Highlight Alarm tone and press the Select soft key or
the key. Highlight your choice and press the Select
soft key or the key.
6. Press the
key to return to Idle mode.
Note: Your phone is preset to a 12-hour format. To change the time
format, see "Time & Date" on page 88.
7. To stop the alarm when it rings, open the phone and
press the Confirm soft key, Volume keys, C key, key,
or
key.
Calendar
With the Calendar feature, you can:
• consult the calendar and check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
Consulting the Calendar
When you select the Calendar menu, the calendar
displays with today’s date highlighted. The following
options are available when you press the Options soft
key:
• Add memo: allows you to write a memo and save it to the
scheduler, to do list, call, or anniversary list.
Section 9: Personal Assistant
105
• Go to date: allows you to jump to a specific date.
• View all: displays all memos set, starting with the oldest,
regardless of the day. To scroll through the memos, press the
Up or Down key.
• Delete day: allows you to delete all memo’s for the specified
day.
• Delete all: allows you to delete all of the memos. You are asked
to confirm your action.
Writing a Memo
You can make up to 100 memos for the calendar. More
than one memo can be made for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the Navigation keys.
2. Press the key.
An empty memo screen displays to allow you to enter
your memo.
key.
Note: For further details about how to enter characters, see "Using ABC
mode" on page 55.
4. Choose from the following Save to options:
• Scheduler: saves the memo to the Scheduler.
• To do list: saves the memo to the To do list.
• Call: saves the memo to your Call list.
• Anniversary: saves the memo to your Anniversary list.
106
Calendar
5. You are asked to set the Memo time. The present time
shows by default. Enter a time and press the OK soft key
or the key.
6. Highlight AM or PM and press the Select soft key or the
key.
7. You are asked if you wish to set an alarm. If you want the
alarm to ring on the chosen day, press the Yes soft key or
the key.
Otherwise, press the No soft key. The memo is saved
and the display returns to the calendar.
8. If you pressed the Yes soft key or the key, set the
key.
Notes: Your phone is preset to a 12-hour format. To change the time
format, see "Time & Date" on page 88.
When the alarm time you set occurs, the alarm rings. To stop the alarm and
to view details about the memo, press the Confirm soft key or the key.
9. If applicable, select AM or PM and press the Select soft
key or the key.
The color of the date on the calendar changes to pink to
indicate that a memo exists for that date.
Viewing a Memo
When you select a day on which more than one memo
exists, the first memo for the day displays.
In that case, press the Left or Right key to scroll to the
previous or next memo.
Section 9: Personal Assistant
107
You can access the following options by pressing the
Options soft key:
• Add: allows you to add a new memo for the day.
• Delete: deletes the memo.
• Edit: allows you to change the memo text.
• Move: allows you to change the time or date of the memo.
• Copy: allows you to copy the memo to another date or time.
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
2. Enter the operation for your calculation by pressing the
key according to the illustration on the display. The
key is used for the decimal. The key can also be used to
create brackets.
3. Enter the second number.
4. To view the result, press the key.
Repeat steps 1 to 4 as many times as required.
To Do List
This feature allows you to:
• enter a list of tasks to be done.
Creating the To Do List
1. The New Memo screen will appear in order for you to
enter your first task. Enter the first task.
108
To Do List
Note: For further details about how to enter characters, see "Using ABC
mode" on page 55.
2. Press the OK soft key or the key.
3. Select a date and press the Select soft key or the key.
Enter a time and press the OK soft key or the key.
Highlight AM or PM and press the Select soft key or the
key.
4. To edit the To Do List, use the following options.
Editing the To Do List
When you select the To do list menu, the current contents
display with a status mark, if the task has been done
or is undone
,
.
1. To change the status of a task, highlight Mark and press
the Select soft key or key.
2. Use the Up or Down navigation key to mark the task as
Done or Undo.
By pressing the Options soft key or the key on the list
or the task view, you can access the following options:
• Add: allows you to create a new task.
• Mark: allows you to change the status of the current task to
either Done or Undo.
• Edit: allows you to change the text, priority, and/or deadline for
the current task.
• Move: allows you to move the task to another date.
• Copy: makes a copy of the current task.
• Delete: deletes the current task.
Section 9: Personal Assistant
109
• Delete all: allows you to delete all of the tasks.
Voice Memo
You can record voice memos. After recording, you can
send the memo to other people via the Multimedia
Message Service.
Record Voice
This menu allows you to record a new memo. Recording
time is limited to free memory space available.
1. To start recording, press the Select soft key or the
key.
2. Record a memo by speaking into the microphone.
3. When the selection is on Stop, press the Select soft key
or the key, or if the recording time expires. Press the
Options soft key to display the following options:
• Send: send the voice memo by Picture Messaging.
• Rename: change the name of the voice memo.
• Delete: delete the voice memo.
• Properties: view the properties of the voice memo.
4. To exit, press the soft key or the
Voice Memos
key.
This menu shows a list of saved voice memos. Scroll to a
soft key:
• Send: allows you to send the memo to other people by using the
Picture Messaging feature. See "Creating and Sending a
Multimedia Message" on page 78 for further details about
sending a message.
110
Conversion
• Rename: allows you to change the memo’s name.
• Delete: allows you to delete the memo.
• Properties: displays information about the memo, such as the
name, size, and format.
Delete All
In this menu, you can delete all of your voice memos.
When the confirmation message appears, press the Yes
soft key. To cancel the deletion, press the No soft key.
Settings
In this menu, you can view and set the settings for your
voice memos. The following options are available:
• Recording time: allows you to set the recording time to Normal
or Limit size (for Picture Messaging).
• Volume: allows you to set the default volume for the recording.
• Default name: allows you to set the default name for the
recordings.
Memory Status
You can check the amount of memory being used and the
memory remaining for voice memos.
The display shows you the total, used, and free memory,
including the number of memos you have stored and the
total number of memos you can store.
Conversion
The conversion menu provides the following conversion
categories:
• Length
Section 9: Personal Assistant
111
• Weight
• Volume
• Area
• Temperature
Timer
You can use this menu to set a timer. To enable the Timer,
use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the Start soft key to start the timer. Press the Stop
soft key to stop the timer.
Stopwatch
You can use this menu to use a stop watch. Press the OK
soft key to start the stopwatch. Press the Reset soft key to
erase all stop watch times recorded. Press the OK soft key
for the lap time. You can have up to 4 lap times.
112
Using the Camera
Using the camera module in your phone, you can take
photos of people or events while on the move.
Additionally, you can send photos to other people in a
Picture Messaging message or set a wallpaper or caller ID
image.
Caution:
Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another
person’s privacy.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions,
shadows may appear on the photo.
1. In Idle mode, press and hold the key on the right side
of the phone to turn on the camera.
You can also press the Menu soft key to access Menu
mode. Highlight Camera and press the Select soft key or
press the key.
2. Highlight Take and Send and press the Select soft key
or press the key.
3. Adjust the image by aiming the camera at the subject.
Press the
soft key to access the camera options. For
details, see "Using Camera Options" on page 115.
You can use the keypad to quickly change the camera
options.
114
Take and Send
4. Press the or key to take the photo. Send To: My
Album? is displayed. Press the Yes soft key if you want
to send the photo to your T-Mobile My Album service.
The phone’s default destination is set to My Album. The
photo is automatically saved in My photos in the phone.
Note: To change the default destination for your pictures, press the
Options soft key when Send To: My Album? appears on the display.
Highlight the Default destination option and the Replace option. You can
then change your default destination to a phone number, email address,
Phonebook, My Album, My Journal, or a Recent log.
5. To use the photo options, press the Options soft key or
the key.
6. To return to Capture mode, select New Photo.
7. To return to Idle mode, press the
key.
Using Camera Options
In Capture mode, you can use various options for the
camera by pressing the soft key.
The following options are available:
Mode:allows you to take a photo in various modes.Once
you change the mode, the corresponding indicator
appears at the top right of the display.
• Normal shot: allows you to take a photo in the normal mode.
• Multi-shot: allows you to take a series of action stills. Select
the capture speed, High Speed or Normal Speed, and the
number of photos the camera will take.When you press the
key, the camera takes photos successively.
• Night mode: allows you to take photos in low (night time)
lighting.
Section 10: Camera
115
• Capture only: allows you to take a photo and it automatically
saves and returns you to the capture screen.
Frame: allows you to select a decorative frame. Select a
frame from the list using the Navigation keys and press
the key to save your setting.
Effects: allows you to change the color tone or apply
special effects to the photo.
Rotation: allows you to rotate the image vertically and
horizontally.
Timer: allows you to set a time delay before the camera
takesthephoto.Select thelength ofdelay you want.When
you press the or key, the camera takes the photo after
the specified time.
Settings: allows you to change the image settings.
• Photo size: allows you to set the image size to either 640x480,
320x240, 160x120, or 128x120. The icon for the selected
image size (640x480), (320x240), (160x120), (128x120)
displays on the capture screen.
• Shutter Sound: allows you to select a tone for the shutter
sound.
• Default name: allows you to change the default name assigned
to your photo.
Help:allows you to change options using your keypad in
capture mode. The following options are available:
zooms in or out
adjust the image brightness
flips the image vertically
116
Accessing Pictures in My Photos
shows the mirror image
Accessing Pictures in My Photos
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Highlight Camera and press the Select soft key or the
key.
3. Select My Photos and press the Select soft key or the
key.
When you access this menu, your phone displays the
photos in Thumbnail mode, which shows them as small
images. Use the Navigation keys to scroll through the
photos.
4. To view the photos on the full screen, press the View or
the key. To go back to Thumbnail mode, press the
Multi soft key or the
key.
5. Press the Options soft key to use the following options:
Photo Album Options
Send: allows you to send the photo as part of a Picture
Messaging message.
Set as: allows you to set the photo as your Wallpaper or
Caller ID image for an entry in the Address Book.
Rename: allows you to change the name of the photo.
Delete: allows you to delete the photo.
Protection: allows you to protect the photo from being
deleted.
Section 10: Camera
117
Properties:shows the properties of the photo, such as the
file name, file date, file format, image resolution, file size,
and protection status.
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the My Photos menu, select the photo you want to
delete and press the View soft key or the key.
2. Press the Options soft key and select Delete.
3. Press the Yes soft key to confirm the deletion.
4. When you have finished, press the
key.
My Album
This menu provides the ability for you to view the photos
you have stored on the t-zone browser. Use the following
procedures to access My Album.
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Highlight Camera and press the Select soft key or the
key.
3. Select My Album and press the Select soft key or the
key. The browser is launched and the My Albums Menu
displays.
4. Photos sent to this folder are stored in the Inbox Album.
Press the Select soft key to view the photos.
5. Press the
key to exit t-zones and return to the Idle
screen.
My Journal
118
Delete All
This menu provides the ability for you to store your
photos using the t-zone browser.
Delete All
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Camera and press the Select soft key or the
key.
3. Select Delete All and press the Select soft key or the
key.
4. Scroll to the album you want to clear and place a check
mark by pressing the key. To delete all of the items,
select All.
5. Press the Delete soft key.
A “Sure to delete?” confirmation message appears.
Press the Yes soft key to confirm the deletion.
6. When you have finished, press the
key.
Settings
This menu allows you to set the image settings.
• Photo size: allows you to set the image size to either 640x480,
320x240, 160x120, or 128x120. The icon for the selected
image size (640x480), (320x240), (160x120), (128x120)
displays on the capture screen.
• Shutter Sound: allows you to select a tone for the shutter
sound.
• Default name: allows you to change the default name assigned
to your photo.
Section 10: Camera
119
120
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone.
Sounds
In this menu,you can view the list ofsounds downloaded
from the web server or received in multimedia messages.
You can set a downloaded sound as the current ring tone.
Scroll through the melody list and press the Options soft
key or the key. The following options are available:
• Set as ring tone: allows you to set the sound as your ring tone.
• Rename: allows you to change the name of the sound.
• Delete: allows you to delete the sound.
• Properties: displays the melody name, size, format and
copyright information.
Using the Get More MegaTones option on the sounds
list, you can access the web site preset by your service
provider and download new sounds.
Images
In this menu,you can view the list ofimages downloaded
from the web server or received in messages. You can set
a downloaded image as the current background image.
Scroll to the image you want to view and press the View
soft key or the key.
By pressing the Options soft key or the key, you can
access the following options:
122
Games
• Set as wallpaper: allows you to set the image as your wallpaper
for the idle screen.
• Rename: allows you to change the name of the image.
• Delete: allows you to delete the image.
• Properties: displays the melody name, size, resolution, and
copyright information.
Using the Get More wallpapers option on the images list,
you can access the web site preset by your service
provider and download new images.
Games
You can download MIDlets (Java applications that run on
mobile phones) from various sources using t-zones and
store them in your phone.
When you access the Games menu, the list of default
games appears. Once you have downloaded games, they
are added to the list.
Note: Java services may not be available, depending on your service
provider.
Downloading a New Game
You can download more games from the web site preset
by your service provider using the Get More games
option.
Launching a MIDlet
Note: The procedure explained below is for the default games. For
downloaded games, the procedure may be different.
Section 11: Funbox
123
1. Scroll to the MIDlet you want on the Games list and press
the Launch soft key or the key.
2. On the startup screen of the MIDlet, scroll to an option
using the Navigation keys.
The following options are available:
• START GAME: starts a new game.
• CONTINUE: allows you to continue the last game you played.
• HIGH SCORE: shows the high score table. This option may not
be available for some games.
• HOW TO PLAY: shows how to play the game and the key
functions for the game.
• OPTION: allows you to switch the game sound on or off.
3. Press the key to confirm your selection.
Viewing MIDlet Information
1. In the Games Menu, scroll to the MIDlet you want and
press the Options soft key.
2. Highlight the Properties option and press the Select soft
key or the key.
The display shows information about the MIDlet, such as
the file size, application version, and its vendor.
3. If you want to delete a MIDlet, press the Delete soft key
and then press the Yes soft key or the key to confirm
the deletion.
4. To exit and return to the Games list, press the Right soft
key or the C key.
124
My Photos
Entering text
If you need to enter text while using a MIDlet, you can
access the following input modes:
Upper-case character mode (A): allows you to enter
upper-case English characters.
Lower-case character mode (a): allows you to enter
lower-case English characters.
Number mode (1): allows you to enter numbers.
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation keys,
press the key to insert it.
T9 mode (T9): allows you to enter English characters by
pressing one key per letter. In this mode, you can change
the case by pressing the 0 key.
To change the text input mode, press the key until the
appropriate indicator appears on the soft key area of the
display.
My Photos
Press the Options soft key to choose from the following
options:
• Send: allows you to create and send a picture message. For
more details, see "Picture Messages" on page 77.
• Set as: allows you to set the photo as your Wallpaper or as a
Caller ID.
• Rename: allows you to rename the photo.
• Delete: allows you to delete the photo.
Section 11: Funbox
125
• Protection: allows you to set protection on this photo so that it
cannot be deleted.
• Properties: allows you to view the file name, file size, date,
resolution quality, and any protection set on the photo.
Delete All
This menu allows you to delete all of the downloaded
items in the Sounds, Images, and My photos folders
separately. Or, you can delete all of the items at one time.
1. To select a folder to clear, press the Up or Down key and
highlight an option. Press the Select soft key or the
key.
2. For the Sounds and My Photos options, place a check
mark next to the option you wish to delete by pressing
the Select soft key.
3. To delete the marked items, press the Delete soft key.
When a confirmation message displays,press the Yes soft
key or the key to confirm.
Memory Status
You can check the amount of memory being used and
memory remaining for games, or sounds and images.
126
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone.
Home
Selecting this menu connects the phone to the network
and loads the t-zones homepage of the Wireless Web
service provider. You can also press the key in Idle
mode to launch the t-zones browser.
The content of the t-zones startup homepage depends on
your Wireless Web service provider. To scroll through the
To go to the startup homepage from any other screen in t-
zones, use the Home option. For more information on the
t-zones menus, see "Selecting and Using Menu Options"
on page 129.
Exiting t-zones
To exit the browser at any time, simply press the
key.
Navigating t-zones
1. To scroll through browser items, press the Up or Down
key.
2. To select browser items, press the Select soft key.
3. To return to the previous page, press the Back soft key or
the C key.
4. To return to the startup homepage, press the Home soft
key.
128
t-zones
Entering Text in t-zones
When you areprompted to enter text,thecurrently active
text input mode is indicated on the screen.
The following modes are available:
Upper-case character mode (A): allows you to enter
upper-case English characters.
Lower-case character mode (a): allows you to enter
lower-case English characters.
You can enter symbols in upper or lower-case character
mode by pressing the 1 key.
Number mode (1): allows you to enter numbers.
• To change the text input mode, press the key one or more
times.
• To enter a space, press the key.
• To edit text, set the cursor to the right of the character(s) to be
corrected.
• Press the C key as required.
• Enter the correct character(s).
Selecting and Using Menu Options
Various menus are available when you are using t-zones
to navigate the Wireless Web.
To access a menu option:
1. Press the Options soft key. A menu displays.
2. Highlight a menu by pressing the Up and Down keys.
3. Select the option by pressing the Select soft key or the
key.
Section 12: t-zones
129
4. If necessary, select a secondary option using the Up and
Down keys, and press the Select soft key or the key
to confirm.
Note: The menus may vary, depending on your version of t-zones.
The following options are available:
• Bookmarks: shows the bookmarks list. You can bookmark the
current web page or access previously bookmarked pages.
• Reload: reloads the current page.
• Home: takes you back at any time to the home page of the
Wireless Web service provider.
• Go to URL: allows you to manually enter the URL address of a
Web page. After entering an address, press the OK soft key or
key to go there directly.
• Show URL: displays the URL address of the Web page to which
you are currently connected. It also enables you to set the
current site as the startup home page.
• Clear cache: deletes the information stored in the cache. The
cache stores the most recently accessed Web pages.
• Security info: shows security information when you access the
wireless web with the secured WAP setting activated.
• Inbox: allows you to read messages received from a web
server.
• Show images: shows the image on the current web page.
Favorites
This menu stores up to 15 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key.
130
t-zones
key.
Note: For further details about how to enter characters, see "Using ABC
mode" on page 55.
3. Enter a name for the favorite item and press the OK soft
key or the key.
After saving favorite items, you can access the following
options by selecting a favorite item and pressing the
Select soft key or the key:
• Go: takes you to the site.
• Edit: allows you to edit the address and name.
• Delete: allows you to delete the address.
Go to URL
This menu allows you to manually enter the URLaddress
of a web site that you wish to access.
For further details about entering characters, see page 51.
Clear Cache
You can clear the information stored in the cache,which is
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
press the No soft key.
Section 12: t-zones
131
132
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the exposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government.TheseFCC exposure limits are derived from
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressed in unitsofwattsper kilogram (W/ kg).TheFCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/ kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.
134
Health and Safety Information
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SARis determined
at the highest certified power level,theactualSARlevelof
the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closer you aretoa wirelessbasestation antenna,thelower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations are
restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.3 cm separation between the
device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with the
above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 13: Health and Safety Information
135
• Head: 0.942 W/Kg.
• Body-worn: 0.564 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/ oet/ fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may be necessary to remove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
and it should providevalues for typicalor maximum SAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/ cgb/
sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Theterm wirelessphonerefershereto hand-held wireless
phones with built-in antennas, often called "cell,"
"mobile,"or "PCS"phones.Thesetypesofwirelessphones
can exposetheuser to measurableradio frequency energy
(RF)because ofthe short distance between the phone and
theuser'shead.TheseRFexposuresarelimited by Federal
Communications Commission safety guidelines that
were developed with the advice ofFDA and other federal
health and safety agencies. When the phone is located at
136
Consumer Information on Wireless Phones
greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's compliance
limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
when in the stand-by mode. Whereas high levels of RF
can produce health effects(by heating tissue),exposureto
low level RF that does not produce heating effects causes
no known adverse health effects. Many studies of low
level RF exposures have not found any biological effects.
Some studies have suggested that some biological effects
may occur, but such findings have not been confirmed by
additionalresearch.In somecases,other researchers have
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
Section 13: Health and Safety Information
137
or medical devices. However,the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user.In such a case,FDA could require the manufacturers
ofwirelessphones to notify users ofthehealth hazard and
to repair,replace or recallthe phones so that the hazard no
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
138
Consumer Information on Wireless Phones
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands oftimes lower than
thosethey can get from wireless phones.Base stations are
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineered or treated with cancer-causing chemicalsso as
to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposed the animals to RF for up
Section 13: Health and Safety Information
139
to 22hours per day.These conditions are not similar to the
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, or acousticneuroma, tumors ofthe brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence ofany harmfulhealth
effects from wireless phones RF exposures. However,
none ofthe studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination oflaboratory studies and epidemiological
studies of people actually using wireless phones would
provide some ofthe data that are needed.Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
data that is directly applicable to human populations,but
ten or more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
140
Consumer Information on Wireless Phones
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result ofthiswork hasbeen thedevelopment ofa detailed
agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and DevelopmentAgreement(CRADA)todoresearch on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
Section 13: Health and Safety Information
141
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount oftime spent using a wireless phone
will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again,thescientificdata do notdemonstratethatwireless
phones are harmful.But ifyou areconcerned about theRF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
The scientificevidence does not show a danger to users of
wireless phones,including children and teenagers.Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
142
Consumer Information on Wireless Phones
Some groups sponsored by other national governments
have advised that children be discouraged from using
wirelessphonesat all.For example,thegovernment in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence
that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless ofwhether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
Section 13: Health and Safety Information
143
believe that accessories that claim to shield the head from
those emissions reduce risks.Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone.Studies have shown that
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
Federaltrade Commission (FTC)charged two companies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate their
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI. FDA
has tested wireless phones and helped develop a
144
Consumer Information on Wireless Phones
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard
specifies test methods and performance requirements for
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmfulinterferencebefound to occur,FDA willconduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Section 13: Health and Safety Information
145
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicateby voice,almost anywhere,anytime.But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
146
Road Safety
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
Section 13: Health and Safety Information
147
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
For moreinformation,pleasecall1-888-901-SAFE,or visit
our web-site www.wow-com.com
Provided by the Cellular Telecommunications & Internet
Association
Operating Environment
Remember to follow any special regulations in force in
any area
and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswith other mobileradiotransmitting equipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder).
UsingYourPhoneNearOtherElectronicDevices
Most modern electronicequipmentisshielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
148
Using Your Phone Near Other Electronic Devices
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations ofWireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Section 13: Health and Safety Information
149
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
Ifyou use any other personalmedicaldevices,consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.Switch your phoneoffin health carefacilities
when any regulationsposted in theseareasinstruct you to
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer ofany equipment that has been
added to your vehicle.
Posted Facilities
Switch your phoneoffin any facility whereposted notices
require you to do so.
Potentially Explosive Environments
Switch your phone offwhen in any area with a potentially
explosiveatmosphereand obey allsignsand instructions.
150
Emergency Calls
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
This phone,like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,to makeor receiveany callsthephonemust be
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/ or phone features are in use. Check with
local service providers.
Section 13: Health and Safety Information
151
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may
firstneed todeactivatethosefeaturesbeforeyou can make
an emergency call. Consult this document and your local
cellular service provider.
When making an emergency call,remember to giveallthe
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy.Children should not be allowed to
play
with it because they could hurt themselves and others,
damage the phone or make calls that increase your phone
bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
152
Other Important Safety Information
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
or butane)must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece
ofequipment and can bebroken.Avoid dropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
Section 13: Health and Safety Information
153
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou're inside a building, being near a window may give
you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
154
Availability of Various Features/Ring Tones
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-extended and over
your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/ or usage
charges. Not all features are available for purchase or use
Section 13: Health and Safety Information
155
in allareas.Downloadable Ring Tones may beavailable at
an additional cost. Other conditions and restrictions may
apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
156
Battery Precautions
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Section 13: Health and Safety Information
157
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
158
Care and Maintenance
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 13: Health and Safety Information
159
160
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period oftime after
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or madeillegible;(c)any plasticsurfacesor other
externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
162
Standard Limited Warranty
products, or ancillary/ peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited
Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the
battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been
used in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsale showing the date ofpurchase,the serialnumber of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
Section 14: Warranty Information
163
replaced leather cases, pouches and holsters will be
warranted for a period of ninety (90) days. All other
repaired/ replaced Product willbewarranted for a period
equal to the remainder of the original Limited Warranty
on theoriginalProduct or for 90days,whichever islonger.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,and labor chargesfor therepair or return ofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTH IN THEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
164
Standard Limited Warranty
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/ PROVINCESDO NOTALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTYLASTS,SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN ADDITION, SAMSUNG SHALL NOT BE LIABLE
FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT
OR ARISING DIRECTLY OR INDIRECTLY FROM THE
USE OR LOSS OF USE OF THE PRODUCT OR FROM
THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIALORSIMILARDAMAGES,ORLOSS
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGESARISING FROM ANYTORT(INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OFINCIDENTALORCONSEQUENTIAL
Section 14: Warranty Information
165
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAYALSO HAVEOTHERRIGHTS,WHICH
VARY FROM STATE TO STATE/ PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONEOTHERTHAN THEORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGALORUNENFORCEABLEBYREASON OFANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
166
Standard Limited Warranty
PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitationsofliability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005Samsung Telecommunications America.Allrights
reserved.
No reproduction in whole or in part allowed without
prior
written approval. Specifications and availability subject
to change without notice.
Section 14: Warranty Information
167
Intellectual Property Statement
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the "Phone System"), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
secured by the Intellectual Property. Moreover,you agree
that you willnot (and willnot attempt to)modify,prepare
derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with
SAMSUNG and its suppliers.
168
Samsung Telecommunications America (STA), Inc.
Samsung Telecommunications America (STA),
Inc.
Internet Address: http://www.samsungusa.com
©2005Samsung TelecommunicationsAmerica.Samsung
is a registered trademark of Samsung Electronics
America, Inc. and its related entities.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972.761.7000
1601E.Plano Parkway,Suite
150
Plano, TX 75074
Toll Free Tel:
1.888.987.HELP
Section 14: Warranty Information
169
170
Index
A
backlight 18
ABC mode 52
icons 17
Accessing a Menu Function
Display Settings 89
38
Alerts on Call 92
Entering Text 51
Mode 52
B
Backlight
Using T9 Mode 53
description 18
Battery
charging 8
installing 8
low indicator 10
removing 6
External Display 18
F
Activating Your Phone 6
Voicemail 11
Broadcast Messages 84
Browser Messages 83
C
Call Functions 21
Adjusting the Call Volume 24
Answering a Call 24
Call Log 25
Making a Call 22
Redialing Last Number 22
Silent Mode 27
Health and Safety Informa-
tion 133
I
Call Waiting 33, 100
Camera 113
International Call 22
K
Charging battery 8
Conversion 111
D
Keypad Tone 91
Dialing a Number
Phonebook 63
171
During a Call 29
L
Low battery indicator 10
M
Making a Call
Own Number 66
Phonebook 23
Calendar 105
Memo
Viewing 107
Writing 106
Menu Navigation 37
Menu Outline 39
icons 17
Message Tone 92
Messaging 69
Types of Messages 70
Searching for a Number 32
Missed Call
Deleting 27
Editing 26
Viewing 26
Multi-Party Call 33
Dropping One Participant 34
Private Conversation 34
Ring Volume 91
Security 93
Mute 31
My Album 118
My Photos
accessing pictures 117
N
Service light 18
Network Selection 100
Shortcuts 38
Network Services
Call Forwarding 98
installing 6
Number mode 52
Soft Keys 28
Speakerphone 31
Speed Dial
O
On/off switch, phone 10
Options
Setting Up Entries 63
Standard Limited Warranty
172
162
W
Storing a number
Phone’s Memory 61
SIM Card 60
Switching on/off
phone 10
T
T9 mode 52
Text Input Mode
Changing 52
Text Messages 72
Travel adapter 8
t-zones 128
Entering Text 129
Exiting 128
Navigating 128
U
Features of Your Phone 14
Understanding Your Phone-
book 59
Finding a Phonebook Entry
62
66
V
Voice List 110
Voice Mail 11, 83
changing number 12
Voice Memo 110
Voice messages 70
173
174
|
