SGH-d357 Series
P O R T A B L E T R I - B A N D
M O B I L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UCEJ4_WB_D357_101805_F9
Printed in China
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
1
2
Table of Contents
3
4
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscriptiondetails,suchasyourPIN,andotheroptional
services available.
Removing the Battery
1. If necessary, power-off the phone by holding down the
key until the power-off image displays.
2. Remove the battery by sliding the battery lock up and
holding it in position, then lift the battery away, as
shown.
6
Activating Your Phone
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratches or bending. Use caution when inserting or removing the card
and keep all SIM cards out of reach from children.
Make sure the gold contacts of the card face into the
phone, then slide the SIM card into the socket.
Removing the SIM Card
To remove the SIM card, slide it away from the cross-bar.
See the following illustration.
Section 1: Getting Started
7
Activating Your Phone
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
Use the travel adapter to charge the battery, and use only
Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately
200 minutes. You can use the phone while the battery is charging, but this
causes the phone to charge more slowly.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
2. Plug the adapter into a standard AC wall outlet. When
charging is finished, unplug the adapter from the power
outlet.
Section 1: Getting Started
9
3. Press the buttons on both sides of the connector (1) and
(2) pull the connector out.
Note: You must unplug the adapter before removing the battery from the
phone during charging to avoid damage.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Warning
Low Battery” message repeats at regular intervals on the
display.Thebacklightturnsofftoconservetheremaining
battery power.
When the battery level becomes too low, the phone
automatically turns off.
Powering On or Off the Phone
1. Open the phone.
2. Press and hold the
key until the phone power-on
screen displays.
10
Setting Up Your Voice Mail
3. If the phone is locked, enter the phone password and
press the OK soft key or the key. The password is
preset to “00000000” at the factory. For further details,
4. If the phone asks for a PIN, enter the PIN and press the
The phone searches for your network and after finding
it, the Idle screen appears. Now, you can make or
receive calls.
Note: The display language is preset to Automatic at the factory. To
change the language, use the Language menu. For further details, see
5. When you wish to switch off the phone, press and hold
the
key until the power-off image displays.
Setting Up Your Voice Mail
To access you voice mail from your keypad, use the
following steps:
1. Open the phone to access your keypad.
2. From an Idle screen, press and hold the
key.
3. Follow the voice mail prompts to access messages.
Accessing Your Voice Mail
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Recent Calls and press the key.
3. Highlight Voice Mail and press the key.
Section 1: Getting Started
11
4. Highlight Connect to Voice Mail and press the OK soft
key or the key.
5. Voicemail appears in the display.
6. Press the OK soft key or the key to dial your phone
specified voice mail number.
7. When connected, follow the voice prompts from the
voice mail center.
Changing the Voice Mail Number
Your SIM card gives you default service number of the
voice mail center. However, you may need to change the
number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Recent Calls and press Select soft key or the
key.
3. Highlight Voice Mail and press the Select soft key or the
key.
4. Highlight Voice Server Number and press the OK soft
key or the key.
5. Highlight Voicemail and press the OK soft key or the
key.
6. Press the Edit soft key to modify the number.
Note: Pressing the
key takes you directly into Edit mode.
7. Enter your new Voice Server number and press the OK
soft key to save.
8. Press the
key to return to Idle mode.
12
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Open View of Your Phone
• Front View of Your Phone
• Side View of Your Phone
• Display Layout
• Selecting Functions and Options
• Command Keys
This section outlines some key features of your phone.
It also displays the screen and the icons that are
displayed when the phone is in use.
Section 2: Understanding Your Phone
13
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of
the features included in your phone.
Userfriendly,menudrivenaccesstofeaturesandoptions.
• Push To Talk
• Instant Messaging capability
• Multimedia capability
• Bluetooth wireless technology
• Voice Command feature
• Speakerphone capability
• Personal Assistant feature provides calendar, alarms, calculator,
record audio, timer, stopwatch, world time, and converter.
14
Open View of Your Phone
Open View of Your Phone
The following illustrations show the main elements of
your phone:
Keys
The following list correlates to the open and front view
illustrations.
1. Display: This screen displays all the information needed
to operate your phone.
2. Soft key: Performs the functions indicated by the screen
text on the bottom of the display.
3. Send key: Allows you to place or receive a call. In
standby mode, press the key once to access the Recent
Call log. If you press and hold the key down, you will
initiate the most recent call from the Recent Call log.
Section 2: Understanding Your Phone
15
4. Clear key: Deletes characters from the display when you
are in text entry mode. When in a main menu, press to
return to the previous menu.
5. Voicemail key: Press and hold to automatically dial your
voicemail.
[ ] character for calling
features. In text mode, press to change the character
6. Asterisk/Shift key: Enters the
*
input type.
7. Power Interface Connector: The power interface
connector is used to plug in the charging accessories.
8. Microphone: The Microphone allows the other callers to
hear you clearly when you are speaking to them.
[ ]
9. Pound/Space/Quiet Mode key: Enters the pound #
character for calling features. In text entry mode, press
to enter a space between characters.
10. Alphanumeric keypad: Use these keys to enter
numbers, letters and characters.
11. WAP Browser/Menu confirm key: When navigating
through a menu accepts the highlighted choice in the
menu. If you press once in Idle mode, the WAP browser
will launch.
12. End key: Ends a call. Press and hold this key for a few
seconds to power your phone On or Off. While in the
main menu, it returns the phone to standby mode and
cancels you input. When you receive an incoming call,
press to reject call.
13. Navigation key: This key allows you to scroll through
phone menu options and provides a shortcut to phone
functions from standby mode.
16
Front View of Your Phone
14. Earpiece: The earpiece allows you to hear the other
caller.
Front View of Your Phone
Keys
The following list correlates to the open and front view
illustrations.
1. Headset Connector: Allows you to plug in a headset for
safe, convenient, hands-free conversations.
2. Volume/Menu Navigation key: Allows you to adjust the
ringer volume in standby mode or adjust the voice
volume during a call. The volume key can also be used to
scroll up or down to navigate through the different menu
options. To mute the ringer during an incoming call,
press the volume key up or down.
Section 2: Understanding Your Phone
17
3. External Speaker: The external speaker allows you to
hear the other caller when using the speaker phone
option.
4. Front LCD: The external LCD view incoming call phone
number or indicates when you have a message.
5. Service LED: The Service LED has the following
functions.
ⅷ Flashes blue to indicate an incoming call or to indicate there is
a voice mail message.
ⅷ Momentarily lights when you power up the phone.
6. Antenna: Used to obtain maximum reception.
18
Side View of Your Phone
Side View of Your Phone
Keys
The following list correlates to the open and front view
illustrations.
1. Voice Command/Speakerphone key: Press to switch
from earpiece to external speaker. Press and hold to
launch Voice Command.
2. PTT key: Press to display Recent call log for PTT calls.
If you press and hold the key down, you will initiate the
most recent call from the Recent Call log for PTT.
Back Light
Abacklightilluminatesthedisplayandthekeypadwhen
you press any key or open thephone. It turns off when no
keys are pressed within a given period of time, and/or
dims the light, depending on the settings in the Back
Light menu.
Section 2: Understanding Your Phone
19
External Display
Your phone has an external display on the front of the
phone. It indicates when you have an incoming call or
message. It also displays date, time, reception, battery
power, and any icons associated with alerts, such as
messages, or a set alarm.
Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when a new e-mail has been received.
Appears when you set an alarm to ring at a specified time.
For details, see page “Alarm” on page 128.
20
Display Layout
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when you are connected to a WAP service.
Appears when the Call Forwarding feature is active. For
details, see page “Call Forwarding” on page 113.
Appears when incoming call Alert Type is set to Vibration.
Appears when an incoming call Alert Type is set to
Vibration then Melody.
Appears when Quiet Mode, Silent All is active.
Appears when Quiet Mode, Vibration All is active.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Indicates that a Bluetooth device is connected.
Indicates that a Push to Talk device is connected.
Section 2: Understanding Your Phone
21
Selecting Functions and Options
Your phone offers a set of functions that can be
customized for your ease and specific needs. These
functions are arranged in menus and sub-menus,
accessed using the two soft keys. Each menu and sub-
menu allows you to view and alter the settings of a
particular function.
In some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key or the
key.
When you access a list of options, your phone highlights
thecurrentlyactiveoption.If,however,thereareonlytwo
options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that
you can select it directly.
22
Command Keys
Selecting Options
To view the various functions and options available and
to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press
the Select soft key or the
key.
• To view the next function or highlight the next option on a list,
press the Down key or the key on the left side of the phone.
• To move back to the previous function or option on a list, press
the Up key or the key on the left side of the phone.
• To move back up one level in the menu structure, press the Left
navigation key or the Back soft key.
• To exit the menu structure without changing the settings, press
the
key.
Command Keys
Functions for the soft keys are defined by what appears
aboveeachinthedisplay. Therearetwosoftkeys, theleft
soft key
and the right soft key
.
Soft Keys
Therolesofthesoftkeys varydependingonthe function
you are currently using; the labels on the bottom line of
thedisplayjustaboveeachkeyindicatetheircurrentrole.
Left Soft Key
Some functions of the left soft key are as follows.
• In the Idle screen, press the Menu (left) soft key
to open
the Menu screen.
• When in a menu mode the left soft key
function is Select.
Section 2: Understanding Your Phone
23
Right Soft Key
Some functions of the right soft key are as follows.
• In the Idle screen, press the IM (right) soft key
to open the
Instant Message Menu screen.
• When in a menu mode the right soft key
function is Back.
Clear Key
The CLR key
symbols from the display. You can also use
is used to erase or clear numbers, text, or
to return
toapreviousmenuortoreturntostandbymodefromany
menu.
• If you enter an incorrect character, briefly press
backspace (and delete) the character.
to
• To erase the entire sentence, press and hold
.
• To back up one menu level, briefly press
.
End Key
The End key
is used to turn on/off your phone,
disconnect calls, and return to the standby mode.
• Press and hold the End key to turn on your phone.
• Briefly press once to disconnect a call.
• Press
to return to standby mode from any menu, or to
cancel the last input.
Send Key
TheSendkey
is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press once to answer calls.
• Enter a number and briefly press
• Briefly press in standby mode to display a list of recent
to make a call.
calls to and from your phone.
24
Command Keys
• Press
number.
twice in standby mode to call the most recent
• Press
to pick up a waiting call. Press
again to switch
back to the other call.
Navigation Key
Use the directional keys on the navigation key to browse
menus, sub menus, and lists. Press the up or down
navigation when jumping to highlighted links on the
web.
Eachkeyalsoactsasashortcuttolaunchapplications.The
Down key is set as the shortcut to the Contact List. The
Left, Up, and Right navigation keys are setup as *User-
Defined Shortcut Keys. Tosettheshortcutkeyfunctions
Section 2: Understanding Your Phone
25
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Recent Calls
• Quiet Mode
• Options During a Call
This section allows you to make or answer a call. It also
includesthefeaturesandfunctionalityassociatedwith
making or answering a call.
Section 3: Call Functions
27
Making a Call
When the Idle screen displays, enter the area code and
phone number, and press the
key.
Note: When you activate the Auto Redial option in the Extra Settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone. See page “Extra Settings”
on page 106 for further details.
Making an International Call
1. Press and hold the
2. Enter the country code, area code, and phone number.
Press the key.
key. The + character appears.
Correcting the Number
Usethefollowingstepstocorrectamis-typedentrywhen
dialing.
1. After dialing a number
ⅷ To clear the last digit displayed, press the
key.
ⅷ To clear another digit in the number, press the Left or Right
navigation key until the cursor is immediately to the right of the
digit to be cleared. Press the
key.
ⅷ To enter a missing digit press the Left or Right navigation
key until the cursor is in position and enter the digit.
ⅷ To clear the whole display, press and hold the
2. Press the key to return to the Idle screen.
Ending a Call
key.
When you want to finish your call, briefly press the
key.
28
Making a Call
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the
RecentCallsMenu.Ifthenumberorcallerislistedinyour
Address Book, the name associated displays.
To access the Recent Calls menu:
1. From the Idle Screen, press
navigation keys to highlight Recent Calls and press
Select. All Calls is highlighted. Press the key. Or
from the Idle Screen, press the key to display a list
Menu. Use the
of the most recent numbers used in the order you dialed
or received them.
2. Use the Up and Down navigation keys to scroll through
the numbers until the number you want highlights.
3. Use the Left and Right navigation keys to scroll through
the Recent Calls options. Choose from All Calls, Missed
Calls, Calls Received, Calls Made, or PTT Recent
Calls.
4. To dial the number, highlight the number and press the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries are
collectively called the Address Book.
OnceyouhavestoredanumberintheAddressBook,you
can dial it by pressing a few keys using the Speed Dial
feature.
For further details about the Address Book feature, see
Section 3: Call Functions
29
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Pressthe keytoincreasethevolumelevelandthe key
to decrease the level.
InIdlemode, youcanalsoadjusttheringervolumeusing
these keys.
Answering a Call
When a call is received the phone rings and displays the
caller’s phone number, or name if stored in the Address
Book.
1. From the Idle Screen press the
key or the Accept
soft key to answer the incoming call.
If the Anykey Answer option in the Settings menu is
activated, you can press any key to answer a call except
the
key and the Reject soft key.
If the Open to Answer option in the Extra Settings
menu is activated, you can answer the call simply by
opening the phone.
Note: To reject an incoming call, press and hold the Volume keys on the
left side of the phone before opening the phone. A quick press of side
volume key silences ringer on incoming call.
2. End the call by closing the phone or by pressing the
key.
30
Recent Calls
Note: You can answer a call while using the Address Book or menu
features. After ending the call, the phone returns to the function screen you
were using.
Recent Calls
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Recent Calls menu. If the
numberorcallerislistedinyourAddressBook, thename
associated displays.
Viewing Missed Calls
The number of calls you have missed displays on the Idle
screen when a call is missed. To view the number details,
use the following steps:
1. If the phone is closed, open the phone.
2. Press the View soft key or the
key. The most recent
missed call displays.
Note: If there is an email or voicemail sent by the same number,
associated icons display and can be selected.
3. To scroll through the missed calls, press the Up or Down
navigation key.
Deleting a Missed Call
To delete a missed call entry, use the following steps:
1. Immediately after missing a call, press the View soft key
or the
key.
2. Press the Options soft key and select Delete. Press the
Select soft key, or the Right navigation key, or the.
key to display a submenu.
Section 3: Call Functions
31
3. Highlight Selected.
Alternatively, to delete all of the numbers, select All.
4. Press the Select soft key or the
key to delete the
number(s).
5. At the “Delete?” prompt, press the Yes soft key to
confirm deletion or No to cancel.
You can press the
key at any time to exit the Missed
Call feature.
Quiet Mode
Quiet mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the
key until the
“Vibration All Activated” message and the
Mode icon displays.
Quiet
In Quiet mode, instead of sounds, your phone will flash
the service light, depending on the function and the
situation.
To exit and reactivate the previous sound settings, press
and hold the
key again until “Vibration All
Deactivated”displays.The QuietModeiconnolonger
displays.
Note: Setting for Quiet Mode can be set to Silent All.
32
Options During a Call
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a call in
progress if your network supports this service.
While on a call, to place a call on hold, simply press the
Hold soft key. You can reactivate the call whenever you
want, by pressing the Retrieve soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in the Address Book.
2. Press the
key to dial the second call. The first call is
automatically put on hold.
When you have an active call and a call on hold, you may
switchbetweenthetwocalls, changingtheoneonholdto
active and placing the other on hold. To switch between
the two calls, simply press the Swap soft key. The current
call isplaced onhold andthecall onhold is reactivated so
that you can continue conversing with that person.
In Call Options
During a call, press the Options soft key to access the
following:
• Menu: Access the phone’s Menu.
• Mute: Silences the audio for the selected call.
• Mute Keys: Silences the key tones when on the call.
Section 3: Call Functions
33
• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to
the contacts you have selected.
• Address Book: Access the Address Book for phone
information.
Ifyouhaveareinamulti-partycall, thefollowingoptions
also display.
• Join: Joins the calls you have established with your phone.
• Transfer: Transfers the call to another number entered.
• End Held Call: Ends the call that is placed on hold.
When you want to finish, end each call normally by
pressing the
key.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone
off, so that the other person cannot hear you.
Example: You wish to say something to person in the room, but do not
want the person on the phone to hear you.
During a call, to switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Mute
option.
3. Press the Select soft key or the
key. The other
person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the
Unmute option.
34
Options During a Call
3. Press the Select soft key or the
key. The other
person can hear you again.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute Keys option is selected, your phone does not
transmittheDTMF(DualToneMulti-Frequency)tonesof
the keys, which allows you topress keys without hearing
annoying key tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send Keys option must be selected.
Searching for a Number in Address Book
You can search for a number in Address Book during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Address Book
option.
3. Press the Select soft key or the
key.
The Address Book entries are listed.
4. If you enter the first few letters of the name, the Address
Book entries are listed starting with the first entry
matching your input.
5. To view the highlighted entry, press the
key.
For further details about the Address Book feature, see
Section 3: Call Functions
35
Call Waiting
The Call Waiting feature allows you to answer an
incoming call while you have a call in progress, if this
serviceissupportedbythenetwork, andyouhavesetthe
Call Waiting-Voice Calls Menu to Activate. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key or the Accept soft key to answer the
incoming call. The first call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
To end a call on hold, press the Options soft key or the
key and select the EndHeld Call option. Press the key.
To end the current call, press the
key.
36
Menu Navigation
Menusandsub-menuscanbeaccessedbyscrollingusing
the Navigation keys or by using the shortcut keys.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Navigation keys to reach a main menu
Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Phone Settings for
example, you can access them by pressing the Select
soft key or the
key.
If the menu that you have selected contains further
options, repeat this step.
4. To scroll through the menus, press the Up or Down
navigation key or the Volume key (located on the left
side of your phone).
5. Press the Select soft key, or the
key to make your
selection.
6. To return to the previous menu level, press the Back soft
key, the key or the Left Navigation key.
7. To exit the menu without changing the settings, press
the key.
38
In Use Menu Outline
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and
options can be quickly accessed by using their shortcut
numbers.InMenumode,MainMenuscanbeaccessedby
pressing the number keys (1 to 0) corresponding to their
location on the screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
4. Press the
key for Settings.
key for Phone Settings
key for Language.
The languages available display.
In Use Menu Outline
Your phone includes a standby menu and an In-Use
Menu.TheIn-UseMenuisavailablewhenyou’reonacall.
Press the
following
Options while in a call to display the
• Menu: accesses menu mode.
• Mute: mute or unmute the current call.
• Mute Keys: mute or unmute keys.
• Send DTMF: send your phone number as tones (if you’re the
recipient of the call). Send the recipient’s phone number as
tones (if you’re the originator of the call).
• Address Book: accesses Address Book menu options.
Section 4: Menu Navigation
39
Menu Outline
Thefollowinglistshowsthemenustructureandindicates
the number assigned to each option.
1: Recent Calls
1: All Calls
2: Missed Calls
3: Calls Received
4: Calls Made
5: Voice Mail
1: Connect to Voice Mail
1: Voicemail
2: Voice Server Number
1: Voicemail
6: Delete All
7: Call Time
8: Data Volume
1: Recent Volume
2: Total Volume
3: Reset Volume
9: Data Call Time
2: Messaging
1: IM**
2: Create New Message
1: Text Message
2: Multimedia Message
3: Email
3: My Messages
1: Inbox
2: Email Inbox
3: Sent
4: Outbox
5: Drafts
6: My Folders
40
Menu Outline
4: Templates
5: Chat
6: Delete All
7: Settings
1: IM
1: Default Community
2: Community Settings
3: Block List
2: Text Message
1: Send Settings
2: Current Profile
3: Text Message Profile
3: Multimedia Message
1: Send Settings
2: Receive Settings
3: Profile
4: Email
1: Send Settings
2: Receive Settings
3: Block List
4: Email Account
5: Email Profile
5: Push Message
6: Broadcast*
8: Memory Status
3: Games & Applications
1: Games
2: Voice Command
3: Alarm
4: Calendar
5: Calculator
6: Record Audio
7: Converter
1: Currency
Section 4: Menu Navigation
41
2: Length
3: Weight
4: Volume
5: Area
6: Temperature
8: Timer
9: Stopwatch
0: World Time
4: MEdia Mall
1: Shop Tones
2: Shop Games
3: Shop Graphics
4: Shop Multimedia
5: Shop Applications
6: MEdia Home
5: MEdia Net
1: MEdia Net Home
2: Favorites
3: Go to URL
4: Browser Profiles
5: Clear Cache
6: Push to Talk
1: PTT Contacts
2: Add Contact
3: Add Group
4: PTT Settings
1: My Availibility
2: Contact Alerts
3: Set Your Name
4: Auto Accept Invites
5: PTT is ON
6: Sort Options
5: Help
42
Menu Outline
1: Service Provider
2: Log In/ Log Out
3: Key Configuration
4: PTT Contact
5: Add Contact
6: Add Group
7: PTT Settings
8: Pending Invitations
7: My MEdia
1: Audio
2: Graphics
3: Video
4: Other Files
5: Memory Status
8: Address Book
1: Contact List
2: Add New Contact
1: Phone
2: SIM
3: Group
4: Speed Dial
5: My Name Card
6: Own Number
1: Number 1
2: Number 2
3: Data
4: Fax
7: Management
1: Default Saving
2: Copy All to Phone
3: Delete All
4: Memory Status
8: Service Number*
9: Settings
Section 4: Menu Navigation
43
1: Time & Date
2: Phone Settings
1: Language
2: Greeting Message
3: Short Cut
4: Extra Settings
3: Display Settings
1: Wallpaper
2: Skin
3: LCD Brightness
4: Contrast
5: Back Light
6: Dialing Display
7: Service Light
1: Off
2: On
4: Sound Settings
1: Incoming Call
2: Keypad Tone
3: Message Tone
1: Text Message
2: Multimedia Message
3: Email
4: Broadcast
4: Power On/Off
5: Folder Tone
6: Quiet Mode
7: Extra Tones
5: Network Services
1: Call Forwarding
1: Forward Always
1: Voice Calls
2: Data Calls
2: Busy
44
Menu Outline
1: Voice Calls
2: Data Calls
3: No Reply
1: Voice Calls
2: Data Calls
4: Unreachable
1: Voice Calls
2: Data Calls
5: Cancel All
2: Call Barring*
3: Call Waiting
1: Voice Calls
2: Data Calls
3: Cancel All
4: Network Selection*
5: Caller ID
6: Closed User Group*
7: Band Selection
6: Bluetooth
1: Activation
2: My Devices
3: My Phone’s Visibility
4: My Phone’s Name
5: Secure Mode
6: Bluetooth Services
1: Headset
2: Handsfree
3: Serial Port
4: Dial Up
5: File Transfer
6: Object Push
7: Security
1: PIN Check
2: Change PIN
Section 4: Menu Navigation
45
3: Phone Lock
4: Change Password
5: Privacy
6: SIM Lock
7: FDN Mode
8: Change PIN2
8: Connection Settings
9: Voice Command Settings
1: Choice Lists
2: Sensitivity
3: Digit Dialing
4: Sound
5: About
0: Reset Settings
* Shows only if supported by your SIM card.
**The IM menu settings are predicated by your Default Community
Setting
46
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Starting VoiceSignal
• VoiceSignal Settings
• Using T9 Mode
• Using Alphabet Mode
• Using Symbols
• Using Numbers
This section outlines how to select the desired text
inputmodewhenenteringcharactersintoyourphone.
ThissectionalsodescribeshowtousetheT9predictive
text entry system to reduce the amount of key strokes
associated with entering text.
Section 5: Entering Text
47
Changing the Text Input Mode
The Text Input option switches the key entry functions
from T9 Mode, ABC Mode, Numeric Mode, andSymbols
Mode.
T9 Mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, pressing the 5 key can enter
J, K, or L. However, the T9 mode automatically compares
the series of keystrokes you make with an internal
linguistic dictionary to determine the most likely word,
thus requiring far fewer keystrokes than the traditional
Alphabet mode.
ABC Mode
This mode allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once,
twice, three, or four times until it displays.
Numeric Mode
This mode allows you to enter numbers.
Symbols Mode
This mode allows you to enter symbols, such as
punctuation marks.
48
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
1. To change the text input mode, press the
2. Choose from the following options:
: AB mode
key.
: Number mode
: T9 mode
Note: In ABC mode press and hold the
mode.
key to access and exit T9
Symbol mode
Note: Press and hold the
key to access Symbol mode. Press the
number key corresponding to the symbol you want to enter. Press the Back
soft key to exit.
Section 5: Entering Text
49
Starting VoiceSignal
To start VoiceSignal, press the on your phone.
VoiceSignal prompts you to "Say a command" and
displays the available commands at the bottom of the
screen.
Note: When you first start VoiceSignal, it voice-activates the names stored
in your contact list. While reading your contacts, VoiceSignal displays the
following message: Please wait while VoiceSignal voice-activates your
contacts.
You can change VoiceSignal settings by starting
VoiceSignal and then selecting the Settings soft key.
Calling a Name or Number
Use the Call command to place a call. If the number you
want to call is stored in your contact list, you can say the
contact name and, optionally, which number (home,
mobile, etc.) you want to call. If the number is not in your
contact list, you can say the number itself.
To Call A Name Or Number
1. Start VoiceSignal.
50
Starting VoiceSignal
You hear "Say a command."
2. Say "Call" followed by the name of a person in your
contact list, and optionally, the number location (home,
work, mobile, etc.) to call, or…
• Say "Call" followed by a valid telephone number, or…
• Say "Call" by itself to be prompted for a name or number.
Examples:
• Call Angela Martinez
• Call Tom Stewart at Work
• Call Donna Harper's Mobile
• Call 781-555-5200
3. After you say a name or number, you might be prompted
"Did you say Call?" followed by the first of up to three
names or numbers.
4. To confirm a name or number, wait for the beep and then
say "Yes."
5. You can also choose the correct name or number from
the choice list by pressing the number next to the
preferred choice, or by selecting it using the phone's
Section 5: Entering Text
51
navigation keys. For information on turning off choice
lists, or customizing their behavior, see “Choice Lists” on
6. If the phone recognizes a name that has more than one
stored number, it might prompt you "Which number?"
Say the label for the number you want, for example
"Work," "Home," or "Mobile."
Hints for Using Call
• Wait for the beep before saying the command.
• When saying a name, speak clearly and say the name of a
person in your contact list, first name followed by last name.
• When saying a telephone number, pronounce each digit clearly
and distinctly but do not pause between the digits. VoiceSignal
recognizes the digits one, two, three, four, five, six, seven,
eight, nine, zero, and "oh." It does not recognize expressions
such as "one eight hundred." Instead, say "one eight zero
zero."
• If VoiceSignal doesn't recognize numbers correctly, try adapting
digit dialing to your voice. To adapt digit dialing, choose Digit
Dialing 'Adapt Digits from the VoiceSignal Settings menu.
52
Starting VoiceSignal
Looking Up a Contact
UsetheLookupcommandtolookupcontactinformation
for any person stored in your contact list.
To Look Up Contact Information
1. Start VoiceSignal.
You hear "Say a command."
2. Say "Lookup" followed by the name of a person in your
contact list.
Examples:
• Lookup Angela Martinez
• Lookup Tom Stewart
3. After you say a name, you might be prompted "Did you
say Lookup?" followed by the first of up to three names.
To confirm a name, wait for the beep and then say
"Yes." You can also choose the correct item from the
choice list using the phone's navigation keys.
Hints for using Lookup
• Wait for the beep before saying the command.
• When saying a name, speak clearly and say the name of a
person in your contact list, first name followed by last name.
Opening an Application
Usethe"GoTo"commandtoopenanapplicationoraccess
a menu on your phone.
To Open An Application Or Access A Menu
1. Start VoiceSignal.
You hear "Say a command."
2. Say "Go To" or…
Section 5: Entering Text
53
Say "Go To" followed by the application you want to
open or…
Say "Go To" followed by a menu item.
Examples:
• Go To (To see a list of applications you can open)
• Go To Calendar
Hints for using Go To
Wait for the beep before saying the command.
• To see a list of applications/menu items you can open, say
"Go To" but do not specify a destination. VoiceSignal
displays a list of valid destinations and prompts you with
"Please Choose." You can then say the name of the
application you want to open.
• If the list is too long to fit on one screen, the screen will
contain the choice "Next Menu." You can say one of the
application or menu names on the list, or say "Next Menu"
to view the next screen
VoiceSignal Settings
Choice Lists
If VoiceSignal is not absolutely confident that it has
correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you to
confirm the correct one.
You can control when choice lists appear by changing the
ChoiceListssetting toAutomatic, AlwaysOn, orAlways
Off.
54
VoiceSignal Settings
Automatic: VoiceSignal displays a choice list when it is
not confident it has identified the correct choice from
among multiple alternatives.
Always On: When there are multiple alternatives,
VoiceSignal always displays a choice list.
Always Off: VoiceSignal never displays a choice list.
Instead, the application picks the best from among the
possible choices.
Sensitivity
InVoiceSignal,"sensitivity"controlsthebalancebetween
rejecting too much, which means the phone frequently
does not recognize names, numbers, or commands, and
rejecting too little, which means it frequently recognizes
something even if nothing was said.
When VoiceSignal rejects an utterance, it displays a
messagesuchas"Pleaserepeat…"or"Nomatchfound."If
you frequently experience these messages, you might be
able to get better recognition by adjusting the Sensitivity
setting toward Reject Less.
If you frequently experience false activations
(VoiceSignaldetectsawrongmatch),youmightbeableto
getbetterperformancebyadjustingtheSensitivitysetting
toward Reject More.
Digit Dialing
Use the Digit Dialing menu to adapt digit dialing to your
voice.
Adapt Digits: Lets you adapt digits, which can improve
voice recognition of phone numbers. Adaptation takes
about 60 seconds.
Section 5: Entering Text
55
Reset Digits: Erases any digit adaptation you have done
and resets digit recognition to the factory default. If you
have not adapted digits, this option is grayed out.
Sound
You can customize the VoiceSignal user interface by
turning playback on or off for prompts, names, and
numbers. You can also change the speed and volume of
name playback.
Prompts: Turns playback on or off for prompts such as
"Please say a command."
Digits: Turns playback on or off for digits, for example,
when confirming a phone number.
Names: Turns playback on or off for names.
Names Settings: Adjusts the speed and volume of name
playback.
About
The About VoiceSignal option provides the software
version available on your handset, the device name, and
VoiceSignal website.
Using T9 Mode
T9 Predictive Text input mode is based on a built-in
dictionary.
Enter a Word in T9 Mode
In T9 mode, begin entering a word by pressing the 2 to 9
keys. Press each key only once for each letter. The built-
in dictionary lists words that match the keystrokes you
have entered.
56
Using T9 Mode
Example: To enter “Hello”, press
,
,
,
,
The word that you are typing appears in the display. It
may change with each key that you press.
3. Enter the whole word before editing or deleting the
keystrokes.
4. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the
to display alternative word choices for the keys that you
have pressed.
key
Example: Both “Of” and “Me” have the
and
keys. The phone
displays the most commonly used choice first.
5. Insert a space by pressing the
key and start
entering the next word.
Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you
want to add, press the
key to display the alternative
words.
2. When the last alternative word is displayed, Add
displays. Press the Add soft key or the key.
3. Enter the word you want to add using ABC mode.
4. Press the OK soft key or the key.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress series.
Note: This feature may not be available for some languages.
Section 5: Entering Text
57
• To enter periods, hyphens, colons, or parenthesis, press the
key. T9 mode applies grammar rules to ensure that correct
punctuation is used.
• To shift case in T9 mode, use the
key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Left and Right keys. To
delete letters, press the
to clear the display.
key. Press and hold the
key
Using Alphabet Mode
Touse the Alphabet Mode use the
your text.
to
keys to enter
1. Press the key labeled with the letter you want:
ⅷ Once for the first letter
ⅷ Twice for the second letter
ⅷ And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
•
•
•
•
•
•
•
58
Entering Symbols
•
•
•
Entering Symbols
Symbol mode enables you to insert symbols and
punctuation marks into text.
1. To enter symbol mode press and hold the
key.
2. To select a symbol, press the corresponding number
key.
3. To display more symbols, press the Up or Down
Navigation key.
4. To clear the symbol(s), press the C key. When the input
field is empty, this key returns the display to the
previous mode.
5. To insert the symbol(s) into your message, press the OK
soft key or the
key.
Using Numbers
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Section 5: Entering Text
59
60
Section 6: Understanding Your Address
Book
Topics Covered
• Using Contact List
• Adding a New Contact
• Using Caller Group
• Using Speed Dial
• My Name Card
• Finding My Own Phone Number
• Management
This section allows you to manage your daily contacts
by storing their name and number in your Address
Book. Address Book entries can be sorted by name,
entry, or group.
Section 6: Understanding Your Address Book
61
Using Contacts List
Dialing a Number from Address Book
Once you have stored phone numbers in the Address
book, you can dial them easily and quickly by using the
location numbers that were assigned to them in the
Address Book.
Finding an Address Book Entry
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Address Book.
Depending on your particular SIM card, the maximum
number of phone numbers the SIM card can store may
differ.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key
or the
key.
3. Select Contact List and press the Select soft key or the
key.
4. Enter the first few letters of the name.
The Address Book entries are listed, starting with the
first entry matching your input.
5. To select a different entry, press the Up or Down
Navigation key until the entry you want is highlighted.
6. Once you have found the entry, press the
key to dial
the number, or press the Options soft key to access the
Address Book entry options.
62
Adding a New Contact
Using Address Book Entry Options
While accessing any Address Book entry, press the
Options soft key to use the options for the entry.
The following options are available:
• View: allows you to view details for the address book entry.
• Send Message: allows you to send a email, text, or multimedia
message to the address book entry.
• Add New Contact: allows you to add a new entry to the address
book. Choose SIM or Phone storage location.
• Delete: allows you to delete the Selected or All phone book
entries.
Adding a New Contact
Storing a Number in the Phone’s Memory
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or
the
3. Scroll to Add New Contact by pressing the Up or Down
key and press the Select soft key or the key.
key.
4. Select Phone and press the Select soft key or the
key.
5. Enter the New Contact information. The following entries
are available:
• Name: allows you to enter a name for the number entered.
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter additional numbers for the entry.
• Email: allows you to enter an e-mail address for the contact.
Section 6: Understanding Your Address Book
63
• Graphic: allows you to assign a caller ID image to the
number you have entered. Press the key to display
graphic menu. Choose from the following options:
ⅷ Downloaded Graphics: assign a graphic that you have
previously downloaded.
ⅷ Favorite Graphics: assign a graphic that you have saved to the
favorite graphics folder.
ⅷ Default Graphics: assign a default (system delivered) graphic.
ⅷ None: no graphic assigned to this contact entry.
• Ringtone: allows you to assign a melody to the number contact
entry. Press the
the following:
key to display ringtone menu. Choose from
ⅷ Default Sounds: assign a default (system delivered) ringtone.
ⅷ Downloaded Sounds: assign a ringtone that you have
previously downloaded.
ⅷ Favorite Sounds: assign a ringtone graphic that you have saved
to the favorite sounds folder.
ⅷ None: no sounds are assigned to this contact entry.
• Group: allows you to assign an existing or create a new
group entry to the number entered. Press the
key to
display groups. Press the Option soft key to Select or Add a
new group.
• Memo: allows you to enter memos associated with the
number entered.
6. Press the Save soft key or the
key to save new
contact entry.
Tip: To change text entry mode press the
key. For further details
about how to enter characters, see “Using Alphabet Mode” on page 58.
7. The View screen appears in the display.
64
Adding a New Contact
8. Press the Options soft key to select from the following:
• Edit: allows you to edit the contact information. Press the
key to save.
• Send Via: allows you to create a text message, multimedia
message, Email message, or send a message to a
discovered Bluetooth device.
• Delete: allows you to delete the entry you have selected.
Press Yes to confirm delete action, or No to cancel.
9. To return to the Idle screen, press the
key.
Storing a Number in the SIM Card
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Add New Contact by pressing the Up or Down
key and press the Select soft key or the
key.
4. Select SIM and press the Select soft key or the
key.
The Add New Contact screen displays.
5. Enter the following information below for the New
Contact.
Note: To change text entry mode press the
key. For further details
• Name: allows you to enter a name for the number entered.
• Phone Number: assigns the number entered to the Mobile
entry.
• Location: allows you to assign a location number on your SIM
for the number being entered.
Section 6: Understanding Your Address Book
65
Note: The Graphic, Alert, and Group options can be set at this point, but the
information is moved from the SIM card to the phone.
• Graphic: allows you to assign a caller ID image to the number
you have entered. Press the
key to display graphic menu.
• Ringtone: allows you to assign a melody to the number
entered. Press the key to display ringtone menu.
• Group: allows you to assign an existing or create a new group
entry to the number entered. Press the
key to display
groups. Press the Option soft key to Select or Add a new
group.
6. Press the Save soft key to save your entry.
7. The View screen appears in the display.
8. Press the Options soft key to display the following
options:
• Edit: allows you to edit the contact information. Press the
key to save.
• Send Message: allows you to send a text message or
multimedia message to the contact entry.
• Copy: allows you to copy the number to another location. You
can select the memory location, either SIM or Phone, and the
location number.
• Send Via: allows you to create a text message, multimedia
message, Email message, or send a message to a discovered
Bluetooth device.
• Delete: allows you to delete the entry you have selected. Press
Yes to confirm delete action, or No to cancel.
9. To return to the Idle screen, press the
key.
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number for the phone
number you want to dial and press the key.
66
Group
The contact entry information is displayed.
2. Press the Left or Right navigation key to find other
numbers on the list.
3. Press the Dial soft key, the
key, or the
key when
you have selected the number you want to call.
Group
Creating a Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Group by pressing the Up or Down key and
press the Select soft key or the
key.
4. Press the Options soft key, select Add and press Select
soft key.
5. Enter the name of the new Group, Caller ID graphic,
and Ringtone. Press the Save soft key.
Editing a Caller Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or
the
3. Scroll to Group by pressing the Up or Down key and
press the Select soft key or the key.
key.
4. Scroll through the group list by pressing the Up or Down
navigation key.
5. When the group you want to edit highlights, press the
Options soft key. The following options are available:
• View: allow you to view all contacts listed under the group.
Section 6: Understanding Your Address Book
67
• Add: allows you to add a new group.
• Edit: allows you to change the name of the group, an Alert, and
assign a graphic ID.
Use the Left or Right navigation keys update text.
Use the Up or Down navigation keys to select the Caller
ID and Ringtone options. Press the
available options.
key to access the
• Send Message: allows you to create a message for the selected
address book entry.
• Delete: allows you to delete the entry you have selected. Press
Yes to confirm delete action, or No to cancel.
6. When you are finished, press the
key to return to Idle
mode.
Deleting a Caller Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Group by pressing the Up or Down key and
press the Select soft key or the
key.
4. Press the Option soft key, select Delete and press
Select soft key or the
key. The Delete sub menu
display.
5. Select from the following options:
• Selected: deletes selected Group.
• All: deletes all Groups listed.
6. Select an option and press the Select soft key.
7. Press the Yes soft key to confirm deletion.
68
Speed Dial
8. When you are finished, press the
key to return to Idle
mode.
Speed Dial
Speed Dialing
OnceyouhavestoredphonenumbersfromyourAddress
book list, you can set up to 8-speed dial entries and then
dial them easily whenever you want, simply by pressing
the associated numeric key.
InIdlemode,tospeeddialthenumbersassignedtokeys(2
to 9), press and hold the appropriate key.
Setting Up Speed Dial Entries
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial by pressing the Up or Down key,
press the Select soft key or the
key.
4. Select the key to which you wish to assign the speed-
dialing number, from the 2 to 9 keys, and press the
Options soft key or the
key.
Note: Memory location 1 is reserved for your Voice mail server number.
5. Choose from the following options:
• Add: allows you to add from the Contact List or FDN List.
• Remove: allows you to remove a speed dial entry.
6. Select Add from the Speed Dial options menu and press
the Select soft key or press the
key.
Section 6: Understanding Your Address Book
69
7. Select the entry you would like to add and press the
Select soft key or the key.
8. The entry is saved and the name displays in the Speed
Dial memory location.
Changing a Number Assigned to a Key
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial by pressing the Up or Down key,
press the Select soft key or the
key.
4. Select the memory location you would like to change.
5. Press the Options soft key, select Change and press the
Select soft key or the
key.
6. Use the navigation keys to select the new speed dial
entry to assign and press the Select soft key or the
key.
7. When you are finished, press the
key to return to Idle
mode.
Deleting Speed Dial Entries
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial by pressing the Up or Down
Navigation key, press the Select soft key or the
key.
4. Select the number assigned key you want to remove.
5. Press the Options soft key or the
key, select Remove
and press the Select soft key or the
key.
70
My Name Card
6. Press the Yes soft key to confirm removal.
7. When you are finished, press the
key to return to Idle
mode.
My Name Card
The Name Card option is your contact information. You
canattachyourNameCardtoatext,multimedia,emailor
Bluetooth device. To create your name card, use the
following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to My Name Card by pressing the Up or Down
Navigation key, press the Select soft key or the
key.
4. The My Name Card screen displays. Enter your contact
information.
5. Press the Save soft key or the
key.
6. Press the Options soft key to access the following
options:
• Edit: allows you to edit the my name card entry.
• Send Via: allows you to send your name card in a text
message, a multimedia message, an email message, or to a
Bluetooth device.
• Exchange Name Card: allows you to search for Bluetooth
devices and if desired, to send the My Name Card information.
• Remove: deletes the My Name Card entry.
7. When you are finished, press the
key to return to Idle
mode.
Section 6: Understanding Your Address Book
71
Finding My Own Phone Number
Thisfunctionisamemoryaid,whichyoucanusetocheck
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any affect the actual subscriber numbers on your SIM
card.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select Own Number by pressing the Up or Down key
and press the Select soft key or the
key.
4. Highlight Voice Line1, your mobile number displays in a
pop up.
5. Enter additional numbers in the 2, 3, and 4 fields.
6. Press the
Management
Default Saving
key to Save.
The Default Saving option allows you turn on or turn off
the auto-save or save prompt for your Phone and SIM
entries. To access this function, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select Management by pressing the Up or Down key
and press the Select soft key or the
key.
72
Management
4. Select Default Saving and press the
key. Select from
the following options:
• Phone: saves all contact entry information to the phone.
• SIM: saves all contact entry information to the SIM card.
• Ask on Saving: prompts you to save contact information to
Phone or SIM.
Copy All to Phone
You can copy all SIM entries to the Phone using the Copy
All toPhoneoption. When youcopyentries tothephone,
duplicate entries are created.
Note: Options are available for phone entries that are not available when
stored to the SIM card. For details see “Storing a Number in the Phone’s
Deleting all of the Address Book Entries
You can delete all your entries from your phone’s
memory, your SIM card, or both.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or
the
key.
3. Scroll to Management by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Highlight Delete All and press the Select soft key or the
key.
5. Highlight the memory location you want to empty and
press the
key.
You can remove the check mark by pressing the
key.
Section 6: Understanding Your Address Book
73
6. Press the Delete soft key to delete the entries in the
selected memory location.
7. Enter your phones password and press the OK soft key
or the
8. When the confirmation message appears, press the Yes
soft key or the key to confirm deletion.
Press the No soft key to cancel deletion.
key.
9. When you are finished, press the
key to return to Idle
mode.
Checking the Memory Status
You can check how many names and numbers are stored
in the Address book, in both SIM card and the phone
memory. You can also see the capacity of both memories.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Management by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Select Memory Status by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
5. When you are finished viewing your phone’s Memory
Status, press the
key to return to Idle mode
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN)
assigned by your service provider. These numbers
74
Management
include emergency numbers, customer service numbers
and directory enquiries.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select Service Number, by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Scroll through the numbers by using the Up or Down
Navigation key.
5. To dial the number displayed, press the
key.
Note: This menu is available only when your SIM card supports Service
Dialing Numbers.
Section 6: Understanding Your Address Book
75
76
Section 7: Messaging
Topics Covered
• Types of Messages
• Using Instant Messenger (IM)
• Creating and Sending New Messages
• Retrieving New Messages
• Viewing Messages
• Manage Your Own Message Folders
• Using Message Options
• Using Message Templates
• Chat
• Deleting Messages
• Settings
• Memory Status
This section allows you to send or receive different
types of messages. It also includes the features and
functionality associated with messaging.
Section 7: Messaging
77
Types of Messages
Your phone provides the following message types:
• IM Messages
• Text Messages
• Multimedia Messages
• Email Messages
Using Instant Messenger (IM)
The Instant Messaging function allows you to send and
receive instant messages using AIM, ICQ and Yahoo
communities. You must first create a default community
accountbeforeaccessingitonyour phone. Toaccess your
default community session settings, use the following
steps:
Default Community Settings
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or
the
key.
3. Select Settings and press the Select soft key or the
key.
4. Select IM and press the Select soft key or the
key.
5. Select Default Community and press the Select soft
key or the
key. This is the service that will load when
you press the IM soft key.
6. Press the Select soft key or the
key to save your
selection.
Using IM
1. When the Idle screen displays, press the IM soft key.
78
Creating and Sending New Messages
2. Use the on-screen application specific functions and
options to use the IM applications.
Creating and Sending New Messages
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include
simple pictures, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
The Message icon ( ) displays when you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key. Using the Up or Down Navigation key, highlight
Create New Message and press the Select soft key or
the
3. Highlight Text Message and press the Select soft key
or the key. The New screen appears.
key.
4. Create your message.
5. When you have finished writing your message, press the
Options soft key. Choose from the following options:
• Send Message: allows you to send the message.
Section 7: Messaging
79
• Insert: allows you to insert Text Templates, Address Book, or
Favorites.
• The Text template allows you to apply one of the preset
message templates to the text. Select one of the 10 items
stored in the Text messages template menu.
• Address Book allows you to add phone numbers to your
message.
• Favorites allows you to add internet addresses to your
message.
• Add MEdia: allows you to add pictures, animation, or melody to
your message.
• Add Picture: allows you to add a picture to your message.
• Add Animation: allows you to add an animation to your
message. Select between Emotions or My Animations.
• Add Melody: allows you to add a melody to your message.
Select between Preset Melodies and My Melodies.
• Attach: allows you to attach a Name Card, Schedule,
Anniversary, Memo or Task.
• Save Message to: save the message in the Drafts folder or a
folder you have created in the My Folder option.
• Language Select: allows you to set the language to English,
French, or Spanish.
• Text Style: allows you to format the style of the text. For the
Text Size attribute, select Normal, Large, Small. For the Text
Mode attribute, select Normal, Underline, or Strikethrough. The
options Bold and Italic are set by using the
checkmark by them.
key to place a
• Input Method: allows you select the text input method. For
example, (T9 ab, T9 Ab, T9 AB, ab, Ab, AB, Numeric, Symbols)
80
Creating and Sending New Messages
6. Select Send Message and press the Select soft key or
the
key. Continue to the next step.
Alternatively, select Save Message to to save the
message in the Drafts folder. After saving the message,
the display returns to the My Messages menu list.
7. Enter a destination number. If you want to send the
message to multiple destinations, press the Down
Navigation key after entering a number and repeat this
step.
8. When you have finished entering destination numbers,
press the Options soft key. The following options
display:
• Send: allows you to send the message.
• Recent Recipient: allows you to view a list of previous
recipients destination numbers.
• Add Address Book: allows you to add recipients to your
Address Book.
• Add Group: allows you to create and add a new group.
• Save to: save the message in the Drafts folder or a folder
you have created in the My Folder option.
• Delete Destination: allows you to delete the destination
number.
9. Select Send and press the Select soft key or the
key
to send message.
Note: When you write a text message, the phone automatically splits it
into several messages if your message exceeds the maximum number of
characters allowed for sending. The number of split messages to be sent
is shown each time your message is split. Depending on your service
provider, the maximum number of characters may vary.
Multimedia Messages
1. In Idle mode, press the Menu soft key to access Menu
Section 7: Messaging
81
mode.
2. Select Messaging and press the Select soft key or the
key. Using the Up or Down Navigation key, highlight
Create New Message and press the Select soft key or
the
3. Highlight Multimedia Message and press the Select
soft key or the key.
4. Using the Up or Down Navigation key, highlight a
message content option and press the key.
key.
Alternatively highlight the message content option, press
the Options soft key. The following options display:
• Subject
ⅷ Add: allows you to enter subject text.
ⅷ Preview: allows you to preview your messages before sending.
ⅷ Send: allows you to send the message
ⅷ Save to: saves the message to Drafts folder or a folder you
have created in the My Folder option.
ⅷ Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
ⅷ Add Page: allows you to add additional pages to your message.
ⅷ Delete Page: deletes a page from your message.
ⅷ Edit Page: allows you to edit selected page.
ⅷ Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Memo or Task to your message.
5. Select Add, press the Select soft key or the
key.
6. Enter the subject text. When you have finished entering
the subject, press the Options soft key. Choose from the
following options:
ⅷ Save: allows you to save subject.
82
Creating and Sending New Messages
ⅷ Insert: allows you to add a message text from the Templates
folder, an entry from the Address Book, or a URL address in the
Favorites folder.
ⅷ Save to: save the message in the Drafts folder or a folder you
have created in the My Folder option.
ⅷ Language Select: allows you to change the language to be
used in input mode.
ⅷ Input Method: allows to select text input mode.
7. Using the Up or Down Navigation key, highlight a
message content option and press the
key.
Alternatively highlight the message content option, press
the Options soft key. The following options display:
• Graphics and Videos
ⅷ Add Graphics: allows you to add Downloaded Graphics and
graphics saved in your Favorite Graphics folder.
ⅷ Add Video: allows you to add Downloaded Videos and videos
saved in your Favorite Videos folder.
ⅷ Preview: allows you to preview the message before sending.
ⅷ Send: allows you to send the message
ⅷ Save to: saves the message to Drafts folder or a folder you
have created in the My Folder option.
ⅷ Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
ⅷ Add Page: allows you to additional pages to your message.
ⅷ Delete Page: deletes a page from your message.
ⅷ Edit Page: allows you to edit selected page.
ⅷ Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Memo or Task to your message.
• Audio
Section 7: Messaging
83
ⅷ Add Audio: allows you to add recorded, downloaded or audio
saved in your Favorite Audio folder.
ⅷ Preview: allows you to preview the message before sending.
ⅷ Send: allows you to send the message
ⅷ Save to: saves the message to Drafts folder or a folder you
have created in the My Folder option.
ⅷ Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
ⅷ Add Page: allows you to additional pages to your message.
ⅷ Delete Page: deletes a page from your message.
ⅷ Edit Page: allows you to edit selected page.
ⅷ Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Memo or Task to your message.
• Message
ⅷ Add: allows you to enter message text.
ⅷ Preview: allows you to preview your messages before sending.
ⅷ Send: allows you to send the message
ⅷ Save to: saves the message to Drafts folder or a folder you
have created in the My Folder option.
ⅷ Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
ⅷ Add Page: allows you to additional pages to your message.
ⅷ Delete Page: deletes a page from your message.
ⅷ Edit Page: allows you to edit selected page.
ⅷ Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Memo or Task to your message.
When you have finished writing the message, press the
Options soft key. Choose from the following options:
ⅷ Save: allows you to save the text message you entered.
84
Creating and Sending New Messages
ⅷ Insert: allows you to add a message text from the Templates
folder, an entry from the Address Book, or a URL address in the
Favorites folder.
ⅷ Save to: save the message in the Drafts folder or a folder you
have created in the My Folder option.
ⅷ Language Select: allows you to change the language to be
used in input mode.
ⅷ Input Method: allows to select text input mode.
8. When you have finished creating the messages, press
the Options soft key and choose Send.
9. Manually enter a number or press the Options soft key
and select Add Address Book, and press the Select soft
key or the
To select a number from your Address Book highlight the
recipient and press the Select soft key or the key.
10. When you have finished entering destination numbers,
press the key.
key.
Alternatively, press the Options soft key, select Send
and press the Select soft key.
Email
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
. Highlight Create New Message and press the
Select soft key or the
key.
3. Highlight Email and press the Select soft key or the
key.
4. Highlight Subject, press the Options soft key, select
Add and press the Select soft key or the
key.
Section 7: Messaging
85
5. Enter the subject of your Email, press the Options soft
key, select Save and press the Select soft key or the
key.
6. Highlight Message and press the
key. Enter text and
press the Options soft key. The following options are
available:
ⅷ
Save: allows you to save the email.
ⅷ
Insert: allows you to add a message text from the Text
Templates folder, an entry in Address Book, or a URL address
in the Favorites folder.
ⅷ
ⅷ
ⅷ
Save to: saves the email to the Drafts folder or a folder you
have created in the My Folder option.
Language Select: allows you to change the language
(English, French, or Spanish)
Input Method: allows you set text entry mode.
7. Highlight File Attach, press the Options soft key.
Choose from the following options and press the Select
soft key or the
key.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Add Graphics: allows you to add graphic files.
Add Video: allows you to add video files.
Add Audio: allows you to add sound files.
Others: allows you to add other files.
Save and Send: saves the email to the Draft folder and also
sends it to the recipient.
ⅷ
ⅷ
Send Only: sends the email.
Save to: saves the email to the Drafts folder or a folder you
have created in the My Folder option.
ⅷ
Attach: allows you to attach a name card, a schedule,
memos and anniversaries stored on your calendar, and task
from your To Do list.
86
Retrieving New Messages
8. When you have finished creating the message press the
Options soft key and select Send Only.
9. Enter a number or email address, or
Press the Options soft key, select Add Address Book to
add a number or email address from the Address Book.
When the correct number or address displays press the
Select soft key.
10. When you have finished entering destination a number or
a email address, press the
key.
Alternatively, press the Options soft key, select Send
and press the Select soft key.
Retrieving New Messages
While text messages from other phones are delivered
directlytoyourphone, MultimediamessagesandEmails
will be stored in the Inbox of the message server and the
serverwillalertyoutonewmessages.Thereforeyouneed
toretrievenewmessagestoyourphoneandreadthemon
the phone.
Retrieving an Multimedia Message
When a new Multimedia message comes in, the display
shows the Multimedia Message icon (
) and a text
notification along with the sender’s number.
1. Press the View soft key or the
key to view brief
information about the message, such as the sender’s
number, the message size, and the subject.
If you want to view the message later in the Inbox, press
the Exit soft key.
Section 7: Messaging
87
2. Press the Options soft key or the
key to access the
following options:
ⅷ
Reply via Text Message: allows you to reply to the
message.
ⅷ
Reply via Multimedia Message to: allows you to reply
to the message with a multimedia message. Choose to reply to
the Sender or All.
ⅷ
Forward: allows you to forward the message to another
person.
ⅷ
ⅷ
Delete: deletes the message.
Extract Address: allows you to move the address to the
contacts list.
ⅷ
Save MEdia: saves to the audio and/or video to the My
MEdia folder. Audio will save to audio folder, graphic will save
to graphic folder and video will save to video folder.
ⅷ
ⅷ
Protection: locks the message to keep it from being deleted
or unlocks the message.
Properties: shows you detailed information about the
message.
3. Select View.
Your phone retrieves the message contents from the
server and displays it.
4. To scroll through the message, press the Up or Down
key.
5. When you have finished, press the
Retrieving an Email
key.
When anew Emailcomesin, the display showstheEmail
icon ( ) and a text notification.
1. Press the View soft key or the
key to view Email
information.
88
Viewing Messages
2. Press the Options soft key and select Retrieve.
Your phone retrieves the new Emails from the server and
displays them on the Inbox list.
3. To read an Email, select it on the list. for details, see
4. When you have finished, press the
key.
Viewing Messages
The My Messages screen provides 6 message folders. To
access the Message folders, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
. Highlight My Messages and press the Select soft
key or the
key.
3. Press the corresponding number to access the message
folders.
ⅷ
Inbox: stores incoming SMS, Multimedia, CB, and WAP
message
ⅷ
ⅷ
ⅷ
Email Inbox: stores incoming Emails.
Sent: stores the messages your phone successfully have sent.
Outbox: stores the messages and Emails your phone is
attempting to send temporarily.
ⅷ
ⅷ
Drafts: stores the messages and Emails you have saved
without sending or tried to send.
My Folders: allows you to create a folder that is used to
store messages. You can create up to 5 message folders to
manage your messages and Emails.
Section 7: Messaging
89
Viewing a Message
1. In Idle mode, press the Menu soft key and highlight
Messaging. Press the Select soft key or the key.
2. Highlight My Messages and press the Select soft key or
the key.
3. Highlight Inbox and press the Select soft key. The
message list opens.
The icons on the left of the number indicates the
message type
ⅷ
ⅷ
ⅷ
: indicates SMS
: indicates Multimedia
: indicates Email
The icons on the left of the message subject indicate the
memory location and the lock status.
From the message list, you can access the following
options by pressing the Options soft key.
ⅷ View: opens the currently selected message.
ⅷ Delete: deletes the currently selected message or all messages
in the Inbox.
ⅷ Move to My Folder: allows you to move the message to one of
the folders you have defined.
ⅷ Sort by: allows you to sort messages by predefined criterion.
ⅷ Protection: locks the message to keep it from being deleted or
unlocks the message.
4. Select a message on the list. The message content
displays.
90
Managing Your Own Message Folders
5. Press the Up or Down key to scroll through the message
screen. For an Multimedia message, press the Left or
Down key to scroll to other pages, if the message has
more than one message.
6. When you have finished, press the
key.
Managing Your Own Message Folders
You can create up to 5 message folders to store messages
separately from the default message folders.
Creating a Message Folder
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Messaging and press the Select soft key or
the
3. Highlight My Messages and press the Select soft key or
the key.
4. Highlight My Folders and press the Select soft key or
the key. A pop-up message “Crate Folder?” displays.
key.
5. Press the Yes soft key to create a new folder, or the No
soft key to return to the previous menu.
6. If you selected Yes, enter the new folder name and press
the OK soft key or the
key.
7. When you have finished, press the
key.
Moving a Message to a Message Folder
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key.
Section 7: Messaging
91
3. Highlight My Messages and press the Select soft key or
the key.
4. Select Inbox and press the Select soft key or the
key.
5. Select the message you want to move and press the
Options soft key.
6. Select Move to My Folders and press the Select soft
key or the
key. Move to My Folders sub menu
displays.
7. Select one of the folders you have defined and press the
Select soft key or the
key. The message is moved to
the folder.
8. When you have finished, press the
key.
Renaming a Message Folder
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key. Using the Up or Down Navigation key highlight
My Messages and press the Select soft key or the
key.
3. Select My Folders. The folder list displays.
4. Scroll to the folder you want to rename and press the
Options soft key, select Rename Folder and press the
Select soft key or the
5. Clear the current name and enter a new name.
6. Press the OK soft key or the key.
7. When you have finished, press the
key.
key.
92
Using Message Options
Deleting a Message Folder
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key. Using the Up or Down Navigation key highlight
My Messages and press the Select soft key or the
key.
3. Select My Folders. The folder list displays.
4. Scroll to the folder you want to delete.
5. Press the Options soft key and select Delete.
6. Press the Yes soft key or the
key to confirm the
deletion.
7. When you have finished, press the
key.
Using Message Options
While viewing the content of a message, press the
Options soft key to access the following options:
Options for SMS Messages
• Reply: allows you to reply to the message via Text message.
• Forward: allows you to forward the message.
• Delete: deletes the message.
• Move to Phone/Move to SIM: If a message is stored in the
SIM card, it is saved to the phone’s memory. If a message is
stored in the phone’s memory it is saved to the SIM card.
• Extract Address: allows you to save the recipient or sender’s
number and URL, Email addresses or phone numbers from the
message text.
• Save Media/Attach: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a message.
Section 7: Messaging
93
Note, their must a media file attached to the message for this
option to be available.
• Protection: allows you to lock the message, keeping it from
being deleted. Also, use to unlock the message.
Options for Multimedia Messages
• Reply via Text Message: allows you to reply to the message
via Text message.
• Reply via Multimedia Message: allows you to reply to the
message via Multimedia message. Choose Sender (replies to
sender only) or All (replies to all contacts on the message).
• Forward: allows you to forward the message to other Email
addresses or phone numbers.
• Delete: deletes the message.
• Extract Address: allows you to save the recipient or sender’s
number and URL, Email addresses or phone numbers from the
message text.
• Save MEdia: allows you to save media items, such as sounds
or images, from the message into your phone’s memory. You
can then use the items when writing a message. Note, their
must a media file attached to the message for this option to be
available.
• Protection: allows you to lock the message, keeping it from
being deleted. Also, use to unlock the message.
• Properties: provides the following information: Subject, From,
Message Size, Transaction ID, Msg Class, MMS Version, To,
Priority, and Date.
Options for Email Messages
• Reply to: allows you to reply to Sender or All.
• Forward: allows you to forward the message to other Email
addresses or phone numbers.
• Delete: deletes the message.
94
Using Message Templates
• Add to Block List: allows you to save email address or email
subject for blocking the Emails.
• Extract Address: allows you to save the recipient or sender’s
number and URL, Email addresses or phone numbers from the
message text.
• Save Media: allows you to save media items, such as sounds
or images, from the message into your phone’s memory. You
can then use the items when writing a message. Note, their
must a media file attached to the message for this option to be
available.
• Protection: allows you to lock the message, keeping it from
being deleted. Also, use to unlock the message.
• Properties: allows you to see an selected Email's subject,
sender, size, attachments, time and so on.
Using Message Templates
Your phone has message templates to allow you to
retrieve them when creating a message. You can change
the templates as your preferences or send a message
immediately.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key. Highlight Templates and press the Select soft
key or the
key.
3. Select a template and press the Options soft key to
access the following options:
ⅷ Edit: allows you to change the template.
ⅷ Send Message: allows you to send an SMS message using
the template.
ⅷ Delete: deletes the template.
Section 7: Messaging
95
ⅷ Add New: allows you to add a frequently used message to the
template list.
4. When you have finished, press the
key.
Chat
Chatallowslogged-inuserstohaveatyped,real-time,on-
line conversation. Users may send private (one-to-one)
messages.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key. Using the Up or Down Navigation key highlight
Chat and press the Select soft key or the
key.
3. You are connected to Chat.
Deleting Messages
You can delete the messages in each message folder
individually or all at one time. You can also delete all of
your messages at one time.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key. Using the Up or Down Navigation key highlight
Delete All and press the Select soft key or the
key.
3. Select the message folder you want to empty.
To delete all of the messages in all folders, select All
Messages.
4. Press the Delete soft key.
96
Settings
5. Press the Yes soft key or the
key to confirm the
key.
deletion.
6. When you have finished, press the
Deleting Individual Messages
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and press the Select soft key or the
key. Using the Up or Down Navigation key highlight
My Messages and press the Select soft key or the
key.
3. Highlight Inbox and press the Select soft key or the
key.
4. Select an individual message you want to delete and
press the Options soft key, select Delete and press the
Select soft key or the
key.
5. Select Selected and press the Select soft key or the
key.
6. Press the Yes soft key or the
key to confirm the
key.
deletion.
7. When you have finished, press the
Settings
You can set up various options for using messaging
services.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and highlight Settings. Press the
Select soft key or the
key.
Section 7: Messaging
97
3. Select the type of messages for which you want to
change. Press the Select soft key or the key.
IM
The following options are available:
• Default Community: allows you to select the default
community.
• Community Settings: allows you to set the Sounds, Sort by,
Auto Sign On, and Security options
• Block List: Blocking messages form users on your block list.
You can add or remove users to or from your block list.
Text Message
The following options are available:
• Send Settings: allows you to set the following options:
ⅷ Reply Path (SIM Dependent): allows the recipient of your
message to send you a reply through your message center, if
your network supports this service.
ⅷ Delivery Report (SIM Dependent): allows you to activate or
deactivate the report function. When this function is activated,
the network informs you whether or not your message has
been delivered.
ⅷ Bearer Selection: allows you to select either GSM or GPRS
Preferred, depending on your network.
• Current Profile: allows you to select an option for sending a
text message. Choose from the following options:
Note: When sending an SMS message to an email, you must first change
the Current Profile to Email Settings.
ⅷ SMS Settings
ⅷ Email Settings
98
Settings
ⅷ Empty
• Text Message Profile: allows you to set the options for sending
text messages. Choose from the following options:
ⅷ SMS Settings
ⅷ Email Settings
ⅷ Empty
Multimedia Message
The following options are available:
• Send Settings:
ⅷ Delivery Report: when this option is enabled, the network
informs you whether or not your message has been delivered.
ⅷ Read Reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
ⅷ Priority: you can select the priority level of your messages.
ⅷ Expiry Date: you can select the length of time your messages
are stored in the message center after they are sent.
ⅷ Delivery Time: you can set a time delay before the phone sends
your messages.
• Receive Settings: you can specify the category of messages
you want to retrieve. Allows you to set the following:
ⅷ Anonymous Reject: rejects messages with a category of
anonymous.
ⅷ
Advert Allowed: allows messages with a category of
advertisement.
ⅷ Information Allowed: allows messages with the category of
information.
ⅷ Report Allowed: allows messages with a report.
ⅷ Auto Download: automatically downloads the message from
the server.
Section 7: Messaging
99
• Profile: you can select a connection profile to be used for
sending and receiving Multimedia messages.
Email
The following options are available:
• Send Settings
ⅷ Send Copy to Self: automatically sends a copy to yourself when
sending to another email.
ⅷ Delivery Confirm: notifies you that the email has been delivered.
ⅷ Read Confirm: notifies you that the email has been read by a
recipient.
ⅷ Reply Address: provides the sender’s address in the sent email.
ⅷ Priority: sets the default priority. Choose from Normal, High, or
Low.
ⅷ Include Signature: Includes the sender’s signature.
• Receive Settings:
ⅷ Check Interval: allows you to select how often the phone
checks the servers for incoming messages.
ⅷ Read Reply: sets the read reply default setting. Choose from
Yes to All, Announce, or No.
ⅷ Retrieve Option: sets the default retrieve option. Choose from
Headers Only, or Normal.
ⅷ Leave a Copy of Messages on the Server: sets the default to
leave a copy of the message on the server.
• Block List: you can set up the mail filter to block spam mails.
You can enter Email address or subject.
• Email Account: you can configure up to 10 Email accounts
using different service providers. The last account you
accessed is automatically activated for sending or receiving
Email messages.
ⅷ Current Account
100
Memory Status
ⅷ Account Settings
• Email Profile: you can select a connection profile to be used for
sending and receiving Emails.
Push Message
The following options are available:
• Receive: you can select whether the phone receive or reject
push-messages from the WAP server. Choose from Never,
Always, or SMS-C Specific.
• Service Center: enter a service center number to receive SMS
messages.
Broadcast
The following options are available:
• Receive: allows you to enable or disable the reception of
broadcast messages.
• Channel List: allows you to indicate the channels from which
you wish to receive broadcast messages. The following options
are available:
ⅷ Save: use to save the channel for future use.
ⅷ Add Channel: use to enter the ID and title for a new channel.
ⅷ Delete: use to remove a channel from the list.
ⅷ Edit: use to change the ID and title of an existing channel.
• Language: allows you to select your preferred language in
which to display cell broadcast messages.
Please contact your service provider for further details.
Memory Status
Youcanchecktheamountofthememorybeingusedand
the memory remaining for multimedia messages.
Section 7: Messaging
101
The display shows the total space including the used and
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
102
Section 8: Changing Your Settings
Topics Covered
• Time & Date Settings
• Phone Settings
• Display Settings
• Sound Settings
• Network Services Settings
• Bluetooth Settings
• Security Settings
• Connection Settings
• Voice Command Settings
• Reset Settings
This section explains the sound and phone settings for
your phone. It includes display settings, security
settings,andextrasettingsassociatedwithyourphone.
Section 8: Changing Your Settings
103
Time & Date
Thismenuallowsyoutochangethecurrenttimeanddate
displayed. You can alsofind out what time it is in another
part of the world.
Note: Before setting the time, you must specify your time zone in the
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Time & Date and press the Select soft key or the
key.
The following options are available. Use the Down
Navigation key to scroll to and set options:
• Set Time: allows you to enter the current time using your
keypad.
• AM/PM: use the Left or Right Navigation key to select AM or
PM.
• Time Format: allows you to change the time format to 12 hours
or 24 hours. Use the Left or Right Navigation key to select
Time Format.
• Set Date: allows you to enter the current date using your
keypad.
• Starting Day of Calendar: allows you to set the starting day of
your calendar. Select Start with Sunday or Start with
Monday.
• Auto Update: allows you to receive time information from your
service provider’s network. Use the Left or Right Navigation
key to set Auto UpDate.
104
Phone Settings
ⅷ Off: you need to manually set the time and date according to
the current time zone using the Set time menu.
ⅷ On: the phone automatically updates the time and date
according to the current time zone using the network service.
ⅷ Confirm first: the phone asks for a confirmation before the
update.
4. Press the Save soft key or the
to save your Time &
Date settings.
Note: Automatic updates of time and date does not change the time you
have set for alarm settings or calendar memos.
Phone Settings
Tocustomizethesettingsofyourphoneusethefollowing
steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and press the Select soft key or the
key.
3. Using the Up or Down Navigation key highlight Phone
Settings and press the Select soft key or the
key.
The following options are available:
Language
You can select a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of the SIM card used.
Depending on your country, service provider, or the
softwareversionofthephone, theAutomaticoptionmay
not display.
Section 8: Changing Your Settings
105
Greeting Message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
For details about entering characters, see “Section 5:
Short Cut
Only in Idle mode, Navigation keys can be used as
shortcut keys. They allow you to access specific menus
directly.
To assign a shortcut to a key:
1. From the Phone Settings menu, select Short Cut.
2. Using the Navigation key, highlight the Navigation key to
be used as a shortcut key and press the
.
3. Select the menu to be assigned to the key and press the
Select soft key. An icon associated with your selection
will display.
Note: To deactivate a shortcut key, press the Options soft key and select
Remove or Remove All.
Extra Settings
You can turn the automatic redialing or answering
features on or off.
1. To turn a feature on, press the
key. A check mark
displays in front of the option.
2. To turn a feature off, press the
key. The check mark
no longer displays.
3. Press the Save soft key to save changes.
106
Phone Settings
The following options are available:
Note: The interval between call attempts varies.
• Auto redial: when this option is checked, the phone makes up
to ten attempts to redial a phone number after an unsuccessful
call.
• Open to Answer: when this option is checked, you can simply
open the phone to answer a call. When it is unchecked, you
must open the phone and press a key to answer a call,
depending on the setting of the Anykey answer option. See
below.
• Anykey answer: when this option is checked, you can answer
an incoming call by pressing any key, except the
key or the
Reject soft key. To reject the call, press the
key or the
Reject soft key. When this option is unchecked, you must press
the
key or Accept soft key to answer a call.
• Side Keypad Lock: locks the sides key when in the folder is
closed.
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are
deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone.
Note: The TTY option is viewable only when inserting the TTY Adapter.
Use the following steps to access the TTY settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Phone Settings. Press the
Select soft key or the
key. Highlight TTY and press
the Select soft key or the
key.
Section 8: Changing Your Settings
107
3. Enter 4-T-T-Y or (4889) in the password field and press
the OK soft key.
The following options are available:
ⅷ Enable: CTM is active and TTY is available for use.
ⅷ Disable: CTM is not available for use.
For additional technical support you may access the
following website or call 1-888-987-4357.
http://www.samsungtelecom.com/contact_us/accessibility.asp
Display Settings
In this menu, you can change various settings for the
display or backlight.
Wallpaper
Thismenuallowsyoutochangethebackgroundimageor
the color of the text to be displayed in Idle mode.
The following options are available:
• Shop Graphics: allows you access WAP browser to download
new graphics.
• Wallpaper List: allows you to select from a list of Default
Wallpapers, Downloaded Graphics and Favorite Graphics.
Highlight Wallpaper List and press the
wallpaper option and press the Select soft key or the
Select the wallpaper you would like to apply. Press the Options
soft key and highlight Select and press the key.
key. Select a
key.
Alternatively, select View to display the wallpaper in the
display. Use the Left or Right Navigation key to scroll through
Wallpaper List. Press the Select soft key to apply selected
wallpaper.
108
Display Settings
• Text Position: allows you to select the position of the text
displayed in Idle mode. Press the Left or Right Navigation
keys to make your selection.
• Text Mode: allows you to select a text format. Choose Normal,
Outline, or Shadow. Press the Left or Right Navigation keys
to make your selection.
• Text Color: allows you to select the color of the text to be
displayed on the Idle screen. Press the Left or Right
Navigation keys to make your selection.
• Graphic Logo: allows you to display your service provider’s
logo instead of its’ name. Press the Left or Right Navigation
keys to make your selection.
Off: the service provider’s name displays in the Idle mode.
On: the service provider’s logo stored in your phone displays in
Idle mode; if no logo has been stored, the service provider’s
name displays.
Press the Save soft key or the
key to save changes.
Skin
You can select the color of the menus displayed. You can
choose from pattern 1 - 4.
LCD Brightness
You can adjust the display brightness for the Main LCD
and the Front LCD to see it better in different lighting
conditions.
Press the Left or Right Navigation key or press the
Volume keys to adjust the brightness.
Contrast
Press the Left or Right Navigation key to adjust the Main
LCDandFrontLCDcontrast.PressOKtoacceptchanges.
Section 8: Changing Your Settings
109
Back Light
Inthismenu,youcanselectthelengthoftimefortheMain
LCD backlight and the Main LCD Dim.
Main LCD On: Settings available are: 15 seconds, 30
seconds, 1 minute, 3 minutes, and 10 minutes.
Main LCD Dim: Settings available are: 15 seconds, 30
seconds, 1 minute, 3 minutes, and Off.
Dialing Display
Inthismenu, youcanselectthedialingfontcolor. Choose
Rainbow or Basic.
Service Light
The Service LED, located on the front of your phone
serves the following functions. See “Front View of Your
Press the Up or Down Navigation key, highlight Off or
On.
Press the Select soft key or the
key to save changes.
Sound Settings
You can customize various sound settings.
Incoming Call
This menu allows you to make a selection from the
following categories:
• Shop RingTone: allows you to access the internet to shop for a
new ringtone.
• RingTone: allows you to select from the preloaded ringtones.
110
Sound Settings
• RingVolume: allows you to set the default volume for your
ringer to sound when receiving an incoming call.
• Alert type: allows you to set the alert default. Choose from
Melody, Vibrate, or Vibrate then Melody.
Press the Left or Right Navigation key to make selection
Press the Save soft key or the
key to save changes.
Keypad Tone
Thismenuallowsyoutoselectthetoneandvolumewhen
you press the keypad.
To turn off the sound, select Off.
Message Tone
This menu allows you to select how the phone informs
you that a new SMS,MMS, Email or Broadcast message
has been received.
For each message tone, the following options are
available:
Tone: you can select a message tone.
Mode: you can select a type of message alert.
• Off: the phone does not use the SMS tone.
• Tone: the phone sounds the selected message tone.
• Vibration: the phone vibrates.
Repetition: you can select how often the phone informs
you of a new message.
• Once: the phone alerts you to a new message just once at the
time of its receipt.
• Every 2 min.: the phone alerts you one time to a new message
every 2 minutes until you open the message.
Section 8: Changing Your Settings
111
Press the Left or Right Navigation key to make selection
Press the Save soft key or the
key to save changes.
Power On/Off
Thismenuallowsyoutoselectthemelodythatthephone
sounds when it is switched on and off.
Press the Up or Down Navigation key to make selection
Press the Select soft key or the
key to save changes.
To turn off the sound, select Off.
Folder Tone
Thismenuallowsyoutoselectthemelodythatthephone
sounds when the flip is being opened.
Press the Up or Down Navigation key to make selection
Press the Select soft key or the
key to save changes.
To turn off the sound, select Off
Quiet Mode
This menu item allows you to select what mode your
phonewillgoinwhenyoupressandholdthe
can choose Vibration All or Silent All.
key.You
When Vibration All is selected your phone will only
vibrate.
When Silent All is selected your phone will not make a
sound.
Press the Up or Down Navigation key to make selection
Press the Select soft key or the
key to save changes
112
Network Services Settings
Extra Tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the
key. A check mark
displays in front of the option.
2. To turn a given tone off, press the
key. The check
mark no longer displays in front of the option.
The following options are available:
• Error Tone: this menu allows you to choose whether or not the
phone sound when you perform an improper function.
• Minute Minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
• Connection Tone: sets whether or not the phone to beep when
your call is connected to the system.
• Alerts On Call: This menu allows you to choose whether or not
the phone informs you when you receive a new message or
when the time for an alarm comes during a call.
• Indicative Tone: sets whether or not the phone plays s tone to
inform you when you have completed the function.
Network Services Settings
Call Forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to forward your business calls to a colleague while
you are on holiday.
To set your call forwarding options:
1. From the Network Services menu screen, select Call
Forwarding.
Section 8: Changing Your Settings
113
2. Select a call forwarding option by pressing the Up or
Down key and then press the Select soft key or the
key.
The following options are available:
• Forward Always: all calls are forwarded.
• Busy: calls are forwarded when you are already on another call.
• No Reply: calls are forwarded when you do not answer the
phone.
• Unreachable: calls are forwarded when you are not in an area
covered by your service provider or when your phone is
switched off.
• Cancel All: all call forwarding options are canceled.
3. Select the call type, Voice Calls or Data Calls, by
pressing the Up or Down key, and then press the Select
soft key or the
key.
4. Using the Left or Right Navigation key select Activate.
Select Deactivate to turn off call forwarding.
5. Scroll to Divert To, enter or change the number to be
called.
To enter an international code, press the 0 key until the
+ sign displays.
6. Press the Select soft key to save changes.
Call Barring (SIM Dependent)
This menu option provides the ability to set the band for
yourhandset. ChoosefromGSM850/1900, GSM1800, or
Automatic.
114
Network Services Settings
Call Waiting
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for voice
calls and/or data calls.
To set your call waiting options:
1. From the Network Services menu screen, select Call
Waiting.
2. Select the call type, Voice or Data, to which the call
waiting option is to be applied by pressing the Up or
Down Navigation key and then press the Select soft key
or the
key.
The screen informs you whether call waiting is activated
or deactivated.
Select Cancel All to cancel all call waiting features.
3. Using the Up or Down Navigation key you can Activate
or Deactivate the call waiting feature respectively.
4. Press the Select soft key to apply selection.
Network Selection (SIM Dependent)
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
To indicate to automatically or manually select the
network to be used when roaming:
Section 8: Changing Your Settings
115
1. From the Network Services menu screen, select
Network Selection.
2. Press the Up or Down key until the appropriate option
highlights, then press the OK soft key or the
key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, go to step 3.
3. Press the Up or Down key until the network you want
highlights and then press the OK soft key or the
key.
The phone will scan for that network and you will be
connected.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide Number: your number does not display on the other
person’s phone.
• Send Number: your number is sent each time you make a call.
Press the Select soft key to apply changes.
Closed User Group (SIM Dependent)
Thisnetworkserviceallowsincomingandoutgoingcalls
toberestrictedtoaselectedusergroup. youcancreateup
to 10 user groups.
116
Network Services Settings
For details about how to create and use a closed user
group, contact your service provider.
Example: A company lends SIM cards to its employees and wants to
restrict outgoing calls to members of the same team.
IfyouselecttheClosedUserGroupmenu, youcanenter
the CUG function. You can now access the following
options:
• Index List: lets you list, add, or delete CUG index numbers.
If there is no CUG index stored, you are prompted to add a new
index when you select this option. Once you have added a CUG
index, the list of current CUG indexes appears.
Add a new CUG index as advised by your service provider, or
delete a group.
• Outside Access: lets you enable or disable calls to numbers
other than those in the CUG. This feature depends on the nature
of your CUG subscription. Please check with your service
provider.
• Default Group: you may set a default CUG with your service
provider. If you have done so, you can enable the Default
Group option on your phone. When making a call, you are give
the option of using your default CUG, instead of selecting one
from the list.
Band Selection
For the phone to make and receive phone calls, it must
register with an available network. Your phone can
handle any of the following types of networks:
• GSM 1800
• GSM 850/1900
Section 8: Changing Your Settings
117
The country where you purchased your phone
determinesthedefaultbandthatituses. Whenyoutravel
abroad, you must remember to change to an appropriate
band.
1. From the Network Services menu screen, select Band
Selection.
2. Select the appropriate option, and press the OK soft key
or the
3. When the display confirms the network band you
selected, press the Yes soft key or the key.
To cancel the selection, press the No soft key.
key.
Bluetooth Settings
Bluetooth is a short-range wireless communications
technology capable of exchanging information over a
distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to
beam information with Bluetooth. If the devices are
within a range of one another, you can exchange
information between them, even if they are located in
different rooms.
Activation
When the Bluetooth is turned on, you can use the
Bluetooth features available. When the Bluetooth is
turned off, you cannot send or receive information via
Bluetooth. To save battery life or in situations where
Bluetooth use is prohibited, such as airline traveling, you
can turn off the Bluetooth wireless technology headset.
118
Bluetooth Settings
My Devices
This menu provides a list of Bluetooth wireless
technology devices discovered by your handset.
1. Highlight My Devices and press the Select soft key or
the
key.
2. To search for the Bluetooth device(s), highlight Search
New Device and press the Select soft key or the
key.
Connecting to a Bluetooth Device
From the Device list,
1. Highlight the device and press the Select soft key or the
key.
2. Enter the PIN for the device.
If connecting to a Bluetooth wireless device consult your
Bluetooth device user manual for your assigned PIN.
If connecting to another handset, enter a user-defined
four to eight digit PIN.
Note: The first time you try to pair with a handset, you and the owner of the
other handset must enter the same PIN.
Once the handsets are paired, you will not need to use the PIN again.
3. Press the OK soft key or the
key.
4. If you are unable to pair with the device a popup appears
in the display. Press the Yes soft key to retry.
Section 8: Changing Your Settings
119
My Phone’s Visibility
My Phone’s Visibility allows other users to see your
accessibility. Select On for other devices to see your
device, or Off for no visibility.
My Phone’s Name
Showsthehandsetname. Youcanchangethenameofthe
handset, by pressing the
key and entering new text.
Secure Mode
Secure Mode feature enables you to restrict other
Bluetooth enable devices from discovering your device.
Bluetooth Services
Actually, the Bluetooth specification is a protocol that
describes how the short-range wireless technology
works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the
chance that different devices will not work together.
Your phone supports the following services:
• Headset: the remote Bluetooth headset enables outgoing and
incoming calls.
• Handsfree: enables outgoing and incoming calls.
• Serial Port: the remote Bluetooth device act as a virtual serial
port.
• Dial up: enables internet access through a phone modem.
• File Transfer: enables users to transfer files from their handset
to another.
• Object Push: enables the transfer of personal data (e.g. VCard,
VCalendar, etc.) to other devices.
120
Security Settings
Security Settings
TheSecurityfeatureenablesyoutorestricttheuseofyour
phone by the others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
PIN Check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN,
providedthatthePINCheckfeatureisenabled.Youmust
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
Section 8: Changing Your Settings
121
The password is preset to “00000000” at the factory. To
change the phone password, see “Change Password” on
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
• Enable: you are required to enter the phone password when you
switch on the phone.
Change Password
The Change Password feature allows you to change your
currentphonepasswordtoanewone. Youmustenterthe
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
Privacy
Using this menu, you can lock your phone and its’
contents. Once you have locked the contents, you must
enter the phone’s password to access the associated
menus.
The password is preset to “00000000” at the factory.
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
codetounlocktheSIMsoyoucanuseadifferentSIMcard.
122
Security Settings
Once you have entered the lock code, you are asked to
confirm your password. Reenter your password and
press the OK soft key.
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phone book.
You must enter your PIN2. The following options are available:
ⅷ Full length entries or wild cards can be entered in to the FDN
list.
ⅷ A full length number with a specific contact name can be
entered into the FDN list.
ⅷ Wildcard entries allow a range of numbers to be dialed with a
single entry: ex. 555 – All dialed numbers that begin with 555
will be allowed. Numbers that do not match the conditions in
the FDN list will be restricted. Note: Entering an asterisk (*) is
not required for wild card entries.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Section 8: Changing Your Settings
123
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Connection Settings
Youcancustomize theprofilescontaining thesettingsfor
connectingyourphonetothenetwork. Thesesettingsare
used for the WAP browser or Instant Messenger, or
sending MMS messages or emails.
Note: Your phone connects to the network by default. If you change the
MMS settings without first checking with your service provider, the WAP,
MMS and Email features may not work properly.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Connection Settings.
Press the Select soft key or the
key.
3. Select the profile you want to change.
For each profile, the following options are available:
• Profile Name: enter a name that you wish to assign to the
profile.
• Home URL: enter the address of the WAP homepage of your
service provider.
• Proxy: place a check in the box to use the proxy server.
• IP Address: enter the IP address of the proxy server.
• Port: enter a port number or use default setting.
• DNS
ⅷ DNS1: enter the primary DNS (Domain Name System) address.
ⅷ DNS2: enter the secondary DNS address.
• Bearer: select the network bearer type for data
transmission, either GPRS or GSM.
124
Voice Command Settings
• Advance Settings
ⅷ APN: enter the access point name used for the address of the
network.
ⅷ Login ID: enter the user ID required to connect to the network.
ⅷ Password: enter the password required to connect to the
network.
Voice Command Settings
ThisoptionprovidesamenuofVoiceCommandSettings.
These settings are used for the VoiceSignal function. Use
thefollowingstepstoaccesstheVoiceCommandSettings.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Voice Command
Settings. Press the Select soft key or the
key.
3. Select from the following menu items:
• Choice Lists
• Sensitivity
• Digit Dialing
• Sound
• About
Reset Settings
You can easily reset your phone to its default settings. To
reset your phone:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Reset Settings. Press the
Select soft key or the
key.
Section 8: Changing Your Settings
125
3. Choose from the following:
ⅷ All Settings
ⅷ Phone Settings
ⅷ Display Settings
ⅷ Sound Settings
4. Press the
key to make your selection and press the
Reset soft key.
5. At the Reset Settings? prompt, Press the Yes soft key to
reset, or the No soft key to cancel.
6. Enter the 4- to 8-digit password and press the OK soft
key or the
key.
The password is preset to “00000000.” To change this
password, see “Change Password” on page 122.
126
Section 9: Personal Assistant
Topics Covered
• Alarm
• Calendar
• Calculator
• Voice memo
• Converter
• Timer
• Stopwatch
• World Time
Thetopicscoveredinthissectionallowyoutoschedule
appointments, viewthecalendar,createTo-Dolists, set
an alarm, and perform simple math calculations.
Section 9: Personal Assistant
127
Alarm
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm
even if the phone is switched off.
To set the alarm:
1. In Idle mode, press the Menu soft key to access the
menu mode.
2. Select Games & Applications and press the Select soft
key or the
key. Using the Up or Down Navigation
key, highlight Alarm and press the Select soft key or the
key. The following options display:
• Wake-up Call: the alarm rings to wake you up at the specified
time.
• Alarm 1: primary alarm setting.
• Alarm 2: secondary alarm setting.
• Auto Power: the alarm rings even when the phone is turned off.
3. Select an alarm type and press the Select soft key or the
key. Set the following options:
• Alarm: use the Left or Right Navigation key to turn alarm on or
off.
Note: Your phone is preset to a 12-hour format. To change the time format,
• Alarm Time: use the alphanumeric keypad enter a time for the
alarm to sound.
• AM/PM: use the Left or Right Navigation key to select AM or
PM.
128
Alarm
• Repeat: use the Left or Right Navigation key to select alarm
frequency.
• Alarm Tone: press the
key, select Downloads,
Favorites, or Defaults alarm tones. Press the Select soft
key or the
key to select a tone.
4. Press the Save soft key to save changes.
Note: To stop the alarm when it rings, open the phone and press any key.
Note: Press
Confirm to turn off the alarm, press Snooze to silence
the phone for 5 minutes.
Setting Auto Power Alarms
Youcanset thephonetoringthealarmwhen thetimefor
an alarm comes, if the phone is switched off.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
key. Highlight Alarm and press the Select
soft key or the
key.
3. Select Auto Power.
4. Using the Up or Down Navigation key, highlight On and
press the Select soft key or the
key to activate the
Autopower feature.
If the menu option is set to Off, and the phone is
switched off at the specified time, the alarm does not
ring.
5. When you have finished, press the
key.
Section 9: Personal Assistant
129
Deactivating an Alarm
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
key. Highlight Alarm and press the Select
soft key or the
key.
3. Select alarm type and press the Select soft key or the
key.
4. Alarm is highlighted, use the Left or Right Navigation key
to turn alarm Off.
5. Press the Save soft key to save changes.
6. When you have finished, press the
key.
Calendar
Thecalendarfeatureallowsyoutoviewthecurrent, past,
or future months in a monthly calendar layout. While
viewing the calendar, the current date is highlighted and
days with a scheduled event will have the
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
Select soft key or the
key. Highlight Calendar and press the
key.
3. Press the Options soft key. The following options appear
in the display.
View Mode
ViewModeallowsyoutoselecthowyouwanttoviewthe
calendar. Choose the following viewing options Day
View or Week View.
130
Calendar
Create
Create allows you to create the following:
Schedule
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
Select soft key or the
key. Highlight Calendar and press the
key.
The calendar displays with today date highlighted.
3. Scroll to a date on the calendar by pressing the
Navigation keys and press the
key.
Alternatively press the Options soft key and select Go
To, press the Select soft key, or the Right Navigation
key or the
key and select Date.
Press the Select soft key or the
key and manually
enter a specific date and press the OK soft key.
4. Press the Options soft key and select Create, press the
Select soft key, or the Right Navigation key or the
key and select Schedule.
5. Press the Select soft key or the
key an empty
schedule screen displays.
6. Enter the following information:
• Subject: enter the Subject text and press the Down Navigation
key.
• Details: enter the Details of your message and press the Down
Navigation key
• Start Date: enter the Start Date using the keypad and press
the Down Navigation key.
Section 9: Personal Assistant
131
• Start Time: enter the Start Time using the keypad and press
the Down Navigation key.
• AM/PM: use the Left or Right Navigation key to select AM or
PM for the start time of the scheduled event and press the
Down Navigation key.
• End Date: enter the End Date using the keypad and press the
Down Navigation key.
• End Time: enter the End Time using the keypad and press the
Down Navigation key.
• AM/PM: use the Left or Right Navigation key to select AM or
PM for the end time of the scheduled event and press the
Down Navigation key.
• Location: enter the physical location of the scheduled event.
Press the key to change text entry mode. Press the Down
Navigation key.
• Alarm: press the
key to set an alarm to ring on the chosen
day. A check mark displays. Press the Down Navigation key.
• Before: enter the number of Minutes, Hours, Days or Weeks
that you would like to be notified prior to the scheduled event.
Press the Down Navigation key. Use the Left or Right
Navigation key to select how you will be notified. Press the
Down Navigation key.
• Alarm Tone: press the
key to select an Alarm Tone to ring,
to remind you of the scheduled event and press the Down
Navigation key.
• Repeat: press the
key to set the alarm to automatically
repeat Every Day, Every Week, or Every Month and press the
Down Navigation key.
• Until: enter the date you would like the Repeat function to end.
7. When you have finished, press the Save soft key.
Anniversary
1. In Idle mode, press the Menu soft key to access menu
mode.
132
Calendar
2. Select Games & Applications and press the Select soft
key or the
Select soft key or the
key. Highlight Calendar and press the
key.
The calendar displays with today date highlighted.
3. Scroll to a date on the calendar by pressing the
Navigation keys and press the
key.
Alternatively press the Options soft key and select Go
To, press the Select soft key, or the Right Navigation
key or the
key and select Date.
Press the Select soft key or the
key and manually
enter a specific date and press the OK soft key.
4. Press the Options soft key and select Create, press the
Select soft key, or the Right Navigation key or the
key and select Anniversary.
5. Press the Select soft key or the
key an empty
Anniversary screen displays.
6. Enter the following information:
• Occasion: enter the detail of the Occasion and press the Down
Navigation key.
• Date: enter the Date using the keypad and press the Down
Navigation key.
• Alarm: press the
key to set an alarm to ring on the chosen
day. A check mark displays and press the Down Navigation
key.
• Before: enter the number of Days or Weeks that you would like
to be notified prior to the scheduled event. Press the Down
Navigation key. Use the Left or Right Navigation key to select
how you will be notified. Press the Down Navigation key.
• Alarm Time: set the alarm time for the scheduled event, using
the keypad and press the Down Navigation key.
Section 9: Personal Assistant
133
• AM/PM: use the Left or Right Navigation key to select AM or
PM for the Alarm Time of the scheduled event and press the
Down Navigation key.
• Alarm Tone: press the
key to select an Alarm Tone to ring,
to remind you of the scheduled event and press the Down
Navigation key.
• Repeat Every Year: press the
key if you would like the
occasion to be a recurring event. A check mark displays.
7. When you have finished, press the Save soft key.
Memo
You can make up to 100 memos for the calendar. More
than one memo can be made for one day.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
Select soft key or the
key. Highlight Calendar and press the
key.
The calendar displays with today date highlighted.
3. Scroll to a date on the calendar by pressing the
Navigation keys and press the
key.
Alternatively press the Options soft key and select Go
To, press the Select soft key, or the Right Navigation
key or the
key and select Date.
Press the Select soft key or the
key and manually
enter a specific date and press the OK soft key.
Note: To skip to the previous or next month, press the Volume keys or the
left side of the phone.
134
Calendar
4. Press the Options soft key and select Create, press the
Select soft key, or the Right Navigation key or the
key and select Memo.
Press the Select soft key or the
key an empty memo
screen displays allowing you to enter your memo.
5. Enter your memo and the press the Save soft key.
Task
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
Select soft key or the
key. Highlight Calendar and press the
key.
The calendar displays with today date highlighted.
3. Scroll to a date on the calendar by pressing the
Navigation keys and press the
key.
Alternatively press the Options soft key and select Go
To, press the Select soft key, or the Right Navigation
key or the
key and select Date.
Press the Select soft key or the
key and manually
enter a specific date and press the OK soft key.
4. Press the Options soft key and select Create, press the
Select soft key, or the Right Navigation key or the
key and select Task.
5. Press the Select soft key or the
key an empty Task
screen displays.
• Task: enter details about the event and press the Down
Navigation key.
Section 9: Personal Assistant
135
• Start Date: enter the Start Date of the event using the keypad.
Press the Down Navigation key.
• Due Date: enter the date the task is due to complete.
• Select Priority: use the Left or Right Navigation key to set a
priority level. Choose either High, Normal, or Low.
6. When you have finished, press the Save soft key.
Viewing an Event
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
Select soft key or the
key. Highlight Calendar and press the
key.
The calendar displays with today date highlighted.
3. Select the date of the event (s) you want to view and
press the
key.
Alternatively press the Options soft key and select View
Mode, press the Select soft key, or the Right Navigation
key or the
key and select Day View.
Press the Select soft key or the
key.
If there is more than one event for that date, the latest
event displays.
The following icons denote events:
Schedule
Anniversary
Memo
136
Calendar
Task
4. Press the Up or Down Navigation key to scroll to the
previous or next event.
If you want to create a new event for that date while
viewing an event press the Options soft key and select
Create, press the Select soft key, or the Right
Navigation key or the
5. Press the key or press the Options soft key, select
View and press the Select soft key or the key. The
event appears in the display.
key.
6. Press the Options soft key, to access the event view
options.
• Edit: allows you to change the memo text
• Create: allows you to create a new entry.
• Send Via: allows you to send the memo to another phone via
Text Message, Multimedia Message, or Bluetooth.
• View Mode: allows you to select how you want to view the
calendar memos. Choose the following vowing options, Month
View, Week View or Day View.
• Delete: allows you to delete the memo.
• Memory Status: allows you to view the memory status of the
Schedule, Anniversary, Memo and Task.
7. When you have finished, press the
Go to
key.
Allows you to go to today or select a specific date.
Sort By
Allowsyoutosortitemsbyeventtype.ChooseSchedule,
Anniversary, Memo or Task.
Section 9: Personal Assistant
137
Delete
Youcandelete calendareventsone by one, by periods, by
month or all at one time.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications and press the Select soft
key or the
Select soft key or the
key. Highlight Calendar and press the
key.
3. Press the Options soft key and select Delete, press the
Select soft key, or the Right Navigation key or the
key. The following options display.
• Selected: delete selected event.
• Periods: deletes events in a selected range. Press the Select
soft key or the
key. Enter the From date, press the
Down Navigation key. Enter the To date and press the OK
soft key.
• This Month: deletes items for specified month.
• All: deletes all items in your calendar.
4. Select option and press the Select soft key or the
key.
5. Press the Yes soft key to confirm deletion.
6. When you have finished, press the
key.
Missed Alarm Events
This menu option lists alarm events that were missed.
Memory Status
This menu option lists the available memory for each
event category. Use the Up or Down Navigation key to
select Schedule, Anniversary, Memo, or Task.
138
Calculator
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until
the symbol you want displays.
2. Enter the operation for your calculation by pressing the
Navigation keys, according to the illustration on the
display.
3. Enter the second number.
4. To view the result, press the
key.
Repeat steps 1 to 4 as many times as required.
Using Record Audio
You can record voice memos. After recording, you can
send the memo to other people via the Multimedia
Message Service.
Record Audio
Record Audio allows you to record voice memos.
Recordingtimeislimitedtofreememoryspaceavailable.
1. To start recording, press the
2. Record a memo by speaking into the microphone.
3. Press the to stop and restart recording or press the
Stop soft key to save recording.
key.
Section 9: Personal Assistant
139
If the recording time expires, the message is
automatically saved. Press the Options soft key to
display the following options:
• Play: plays back your memo.
• Record: launches Record Audio screen to create a new voice
memo.
• Go to Recorded Audio: launches the Audio list screen to select
from your voice memos.
• Send Via: allows you to send your memo to other people by
using the MMS, and Bluetooth
• Delete: allows you to delete the memo.
• Rename: allows you to change the memo’s name.
• Protection: use to protect recorded audio files from being
deleted.
• Properties: displays the Name, Size, and Format of the voice
memo.
4. To exit, press the Back soft key or the
Audio List
key.
This menu shows a list of saved voice memos. Scroll to a
memo and press the Options soft key or the key. The
following options are available:
• Play: plays the memo.
• Send via: allows you to send the memo to other people by using
the MMS feature or Bluetooth functionality.
• Delete: allows you to delete selected or all voice memos.
• Rename: allows you to change the memo’s name.
• Move to Favorite Audio: allows you to move this voice memo to
your favorite audio folder.
140
Converter
• Share for Bluetooth: allows you to set the properties for
Bluetooth. Choose the following to set options.
ⅷ Selected: allows you to use Bluetooth.
ⅷ Select Files: allows you to select audio files that can be
accessed using Bluetooth.
ⅷ Share All: allows all audio files to be shared using Bluetooth.
ⅷ Release All: releases all audio files using Bluetooth
• Protection: turns on or off protection for your audio files.
• Properties: displays information about the memo, such as the
name, the date when the memo was made, recording
duration, and memory size.
Converter
Theconversionmenuprovidesthefollowingconversion
categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
Timer
You can use this menu to set a timer. To enable the Timer,
use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
key to start the timer. Press the
key to
stop the timer.
Section 9: Personal Assistant
141
Stopwatch
You can use this menu to measure intervals of time. Press
the key to start the stopwatch. Press the to stop the
stopwatch. Press the Reset soft key to erase all times
recorded.
World Time
WorldTime allowsyoutoviewthe timeof day or nightin
another parts of the world. World displays time in the 24
different time zones around the world.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Games & Applications, press the Select soft
key or the
key.
3. Scroll to World Time by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Use the Left or Right Navigation keys to browse cities
and times.
142
Section 10: WAP
Topics Covered
• Launching the WAP Browser
• Accessing a WAP Site
• Navigating the WAP Browser
• Using Favorites
• Downloading Multimedia Files
• Clearing the Cache
Your phone is equipped with a WAP (Wireless
Application Protocol) browser which allows you to
access Internet specified for mobile phones. This
section explains how to access the WAP services of
your service provider and navigate the WAP browser.
Section 10: WAP
143
Launching the WAP Browser
1. In Idle mode, press the
key to launch the WAP
browser. You can also press the Menu soft key to access
menu mode and highlight MEdia Net and press the
Select soft key or the
2. Select MEdia Net Home and press the Select soft key or
the key.
key.
your phone is connected to the network and loads the
homepage of the Wireless Web service provider. The
content of the start-up homepage depends on your
Wireless Web service provider.
3. To scroll through the screen, use the Up and Down
navigation keys.
4. To exit the browser at any time, simply press the
key.
Access a WAP Site
There are several ways to access a WAP site:
• Selecting a link on the browser
• Using a bookmark item in the Favorites folder; use the
Bookmarks option on the browser menu list or Favorites menu.
• Entering a URL address manually; use the Go to URL option on
the browser menu list.
Navigating the WAP Browser
1. To scroll through browser items, press the Up or Down
Navigation keys.
2. To select a browser item, press the
key or press the
Options soft key and choose Select.
144
Navigating the WAP Browser
3. To return to the previous page, press the
press the Options soft key and choose Back.
key, or
4. To access the browser menu list, press the Menu soft
key.
5. To return to the start-up homepage, press the Menu soft
key and select the Home option.
Entering Text in the WAP Browser
Whenyouarepromptedtoentertext, thecurrentlyactive
text input mode is indicated on the screen. To change the
text input mode, press the
key one or more times.
The following modes are available:
Upper-Case Alphabet Mode (A): allows you to enter
upper-case characters.
Lower-Case Alphabet Mode (a): allows you to enter
lower-case characters.
Note: You can enter symbols in upper or lower case alphabet mode by
pressing the 1 key.
T9Mode(T9):allowsyoutoentercharactersbypressing
onekeyperletter.Inthismode,youcanuseonlythe0key
to display alternative words. To change case, press the *
key.
Number Mode (1): allows you to enter numbers.
Selecting and Using Menu Options
VariousmenusareavailablewhenyouareusingtheWAP
Browser to navigate the Wireless Web.
Section 10: WAP
145
Toaccessamenuoption, pressthemenusoftkey. Amenu
list displays.
Note: The menus may vary, depending on your version of the WAP
Browser.
The following options are available:
• Favorites: shows the bookmarks list. You can bookmark the
current page or access previously bookmarked pages.
• Reload: reloads the current page.
• Home: takes you back at any time to the homepage of the
Wireless Web service provider.
• Go to URL: allows you to manually enter the URL address of a
WAP site. After entering an address, press the OK soft key to go
there directly.
• Show URL: displays the URL address of the page to which you
are currently connected. It also enables you to set the current
site as the startup homepage.
• Clear Cache: deletes the information stored in the cache. The
cache stores the most recently accessed pages.
• Inbox: allows you to read messages received from a WAP
server.
• Show Images: shows the image on the current page. Press the
Next soft key to view the next images.
• Certificates: shows the security information when you access
the Wireless Web with the secured WAP setting activated.
• Text Message: allows you to send messages using the WAP
server.
Using Favorites
While navigating the WAP browser, you can bookmark
the site to quickly and easily access it at a future time. The
URL addresses of the bookmarked sites are stored in the
146
Using Favorites
Favorites folder, wherein you can use the 5-preset URL
addresses and store your favorite URL addresses.
Accessing a WAP Site Using Favorites
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Favorites.
4. Select a bookmark item on the Favorite list.
Storing a URL Address
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select MEdia Net and press the Select soft key or the
key.
3. Select Favorites.
4. Select an <Empty> location, and press the Select soft
key
5. Enter the name and address and press the Save soft key
or
6. When you have finished, press the
Editing a Bookmark
key.
key.
1. From the Favorite list, select the bookmark you want to
change.
2. Select Options and select Edit.
3. Change the address and the name, as you would when
storing a new one.
4. When you have finished, press the
key.
Section 10: WAP
147
Deleting a Bookmark
1. From the Favorites list, select the bookmark you want to
delete.
2. Select Options and select Delete.
3. Press the Yes soft key or the
key to confirm the
deletion.
4. When you have finished,
press the key.
Downloading Multimedia Files
You can buy a variety of multimedia files, such as
ringtones, graphics, applications, Multimedia contents,
and so on from the WAP browser and download them to
your phone’s memory. Your phone has embedded links
to the WAP sits providing you with download services,
preset by your service provider.
1. In Idle mode, press the Menu soft key to access Menu
mode and select MEdia Mall.
2. Highlight Shop Tones, Shop Games, Shop Graphics,
Shop Multimedia, or Shop Applications, depending on
the type of items you want to buy.
To access homepage of the online shopping mall, select
MEdia Home.
3. Find the item you want to download and follow the
instructions on the screen to purchase it.
Note: This content is delivered to you in Multimedia messages. You can
retrieve the messages from the server and then save the items in your
phone’s memory. you cannot forward these messages to other people or
add the saved items to a Multimedia message.
148
Clearing the Cache
Clearing the Cache
Thecacheisthephone’stemporarymemory inwhichthe
most recently accessed WAP pages are stored. You can
clear the cache at anytime.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Clear Cache.
4. Press the Yes soft key or the
key to confirm the
key
deletion.
5. When you have finished, press the
Changing the WAP Profiles
You can set up server profiles for the WAP browser.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings. Highlight Connection Settings and
press the Select soft key or the
key.
3. Select the profile you want.
For each profile, the following options are available:
ⅷ Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
ⅷ Home URL: set the address of your startup homepage. When
the default homepage displays, you can delete it using the
key and enter your own choice.
ⅷ Proxy: place a check in the box to use the proxy server.
ⅷ IP Address: enter the IP address of the proxy server.
ⅷ Port: enter a port number or use default setting.
Section 10: WAP
149
ⅷ DNS
ⅷ DNS1: enter the primary DNS (Domain Name System)
address.
ⅷ DNS2: enter the secondary DNS address.
ⅷ Bearer: select the bearer to be used for each type of network
address accessed: GPRS or GSM. The remaining options
depend on the Bearer setting.
When the bearer is set to GPRS:
ⅷ APN: enter the access point name used for the address of the
GPRS network gateway.
ⅷ Login ID: enter the User ID required to connect to the GPRS
network.
ⅷ Password: enter the password required to connect to the GPRS
network.
When the bearer is set to GSM:
ⅷ Dial Number: enter the PPP server phone number
ⅷ Login ID: enter the PPP server login ID.
ⅷ Password: enter the PPP server password.
ⅷ Data Call Type: select a data call type: Analog or ISDN.
Note: The WAP settings may vary depending on the service provider.
150
Section 11: Push to Talk
Topics Covered
• Initializing Push to Talk Service
• PTT Icons
• Add Contact
• Add Group
• Making a PTT Call
• PTT Settings
• Call Waiting
• Voice Message
• Help
This section describes the Push to Talk (PTT) feature
which allows you to contact your family, friends, and
co-workers (also using PTT) tosee ifthey areavailable.
Section 11: Push to Talk
151
Initializing Push to Talk Service
1. From the Idle screen, press the PTT key and Go to Step
3.
Alternatively, in Idle mode, press the Menu soft key to
access menu mode.
2. Highlight PTT and press the Select soft key or the
key. The PTT Setup screen appears in the display. You
will be asked if you want to initialize PTT.
3. Press the Yes soft key to initialize PTT.
Alternatively, press the No soft key to return to main
menu.
Note: PTT charges will apply.
4. Enter a name (up to 20 characters) in the Set Subscriber
Name field and press the OK soft key or the
key.
5. A series of pop-ups appear in the display, informing you
that initialization has begun. Initialization can take
several minutes.
6. When initialization is complete a pop-up appears in the
display to notify you that initialization is complete and
PTT is ready for use. The
screen.
icon appears on the display
PTT Icons
This section covers the icons which will appear next to
individuals and groups in your PTT Contacts list
indicating their availability.
152
PTT Icons
My Availability
The availability icon appears next to the signal indicator
on your Idle screen. Theseicons (except the PTT Message
icon)indicatetheavailabilityotherswillseewhenyou
are listed in their PTT Contacts.
Available: This will be your availability state once you
initialize service and it will not change unless you change
it as noted below.
Unavailable: This becomes your availability state if you
power-off your phone, turn PTT off, or if the system
detects you have moved out of coverage.
Do Not Disturb: This becomes your availability state if you
change My Availability to Do Not Disturb. In this state you
may place PTT calls but will not receive a PTT call.
PTT Message: This icon displays (on your handset only) in
place of your availability status notifying you that a PTT
message is waiting. When this icon appears, press the
PTT key or access the PTT menu from the Idle screen.
PTT Contact Availability
This section overs the icons which appear next to
individuals and groups in your PTT Contacts list
indicating their availability.
Individuals
Available: This icon should let the User know this person
is logged into the PTT application and can receive PTT
calls.
Section 11: Push to Talk
153
Unavailable: This icon indicates the contact is unavailable
to receive PTT calls, because the contact has been logged
off, is in the power-off state, or it is out of coverage.
Do Not Disturb: This icon should let the User know this
person has set themselves to Do Not Disturb and will not
receive a PTT call.
Available/Silent or Vibrate: This icon should let the User
know this person has set their device to silent or vibrate.
They can receive calls but will be given the option to
accept/reject a PTT call.
Invitation in Progress: This icon should let the User know
the invitation to this person for addition to the PTT Contact
List is in progress. A call can not be placed to the person
until the invite completes and the icon changes to
available.
Groups
Group Available: This icon will only display next to a
group and lets the User know that at least one person in
the group is logged into the PTT application and can
receive a call.
Group Unavailable: This icon will only display next to a
group and lets the User know that everyone in the group is
unavailable either because they have logged out of the
service, or powered off their handsets.
Group Do Not Disturb: This icon will only display next to a
group and lets the User know that everyone in the group
has set their PTT service to Do Not Disturb.
154
Add Contact
Group Available/Silent or Vibrate: This icon will only
display next to a group and lets the User know that
everyone in the group has set their ringer to Silent or
Vibrate.
Group Invitation in Progress: This icon displays next to a
group whose invitations are in the process of being
accepted. Once one person has accepted the icon will
change and a call can be placed to all members of the
group who have accepted the group and are available.
Add Contact
Note: The maximum number of contacts is 99.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Highlight PTT and press the Select soft key or the
key. Using the Up or Down Navigation key, highlight Add
Contacts and press the Select soft key or the
3. Enter name and number of your new contact and press
the OK soft key or the key.
4. The handset sends an invitation to the new contact and
the Invitation In Progress icon displays.
key.
5. An invite response pop-up displays informing you that an
invite has been sent to the new contact.
Viewing Push To Talk Contacts
1. Press the PTT key. The PTT Contacts list appears in
the display.
Alternatively, in Idle mode, press the Menu soft key to
access menu mode.
Section 11: Push to Talk
155
2. Highlight PTT and press the Select soft key or the
key.
3. Highlighted is PTT Contacts and press the Select soft
key or the
4. PTT Contact list displays.
PTT Contact Options
Press the Options soft key to display the following
key.
Ⅵ
options:
• Call Me Alert: this option allows you to send a message to
an individual in your PTT Contacts whose status is Available,
Silent/Vibrate, or Do Not Disturb. A message is displayed on
their Idle screen “Please Call <X>”. Where <X> equals the
name stored in their Contact List. Recipients can press their
PTT key to return your call.
• Search: this option allows you to search an individual or
group from the list by name.
• Quick Group: this option allows you to make a group call
without pre-establishing it in your PTT Contacts. Once Quick
Group is selected a list of your available individuals will
appear. Use the center
to mark the call participants and
then press the PTT key to begin the group call.
• Voice Message: this option allows you to leave a voice
message for the person or group instantly. Highlight the
name or names and press and hold the PTT key to begin
recording. Release the PTT key to end and send the
recording.
• View: this option displays the contact name and number. See
• Add Contact: this option allows you to add contacts to your
PTT Contact list.
• Edit: this option lets you rename the individual.
156
Add Contact
• Delete: this option allows you to delete the contact that you
have selected or all contacts.
PTT Group Options
Ⅵ
Press the Options soft key to display the following
options:
• View Members: this option lets you view the members of the
group and their availability.
• Search: This option allows you to search an individual by
Contact or by Group.
• Voice Message: this option allows you to leave a voice
message for every member of the selected group. If a
member does not have a voicemail box established, no
message will be delivered.
• Edit: this option allows you to edit the group you selected.
You can perform one of the following:
ⅷ
Add a Member: prompts the Add New contacts screen.
After addition of the member, a notification is sent to the other
group participants of the new group member.
ⅷ
ⅷ
Delete a Member: prompts a Delete a Member screen.
After removing a member a notification is sent to the individual.
Rename: this option allows you to rename the individual or
group.
• Delete: this option allows you to delete an individual or a
group. Deleting a group which you originated deletes the
group from PTT Contacts for all participants.
• Leave Group: this option allows you to delete a group from
your PTT Contacts which you did not originate. The group
will remain on the PTT Contact lists of the other members
and the originator receives a PTT Message that you have
left.
5. Press the Select soft key or the
key to access the
highlighted option.
Section 11: Push to Talk
157
6. Press the OK soft key or the
key to save changes.
key.
7. When you have finished, press the
Quick Group Shortcut
The Quick Group Shortcut allows you to select contacts
individually and quickly.
1. Press the PTT key. The PTT Contacts list appears in
the display.
2. Use the navigation key to highlight each contact you
wish to select and press the
key to place a
checkmark.
3. Once all participants are selected (may select up to 6)
then press the PTT key to begin the PTT call. The
words “Quick Group Call” displays on your screen.
Note: When the call completes, “Quick Group Call” displays in your PTT
Call Log. Although this call is logged with your other PTT calls a call can
not be placed to this entry.
4. When you have finished, press the
Dynamic Call
key.
The Dynamic Call option allows you to make a call with
only select members of your group.
1. Press the PTT key. The PTT Contacts list appears in
the display.
2. Use the navigation key to select a group and press the
key. Highlight the contact(s) and press the
place a checkmark.
to
3. Press and hold the PTT key. Connecting to Dynamic
Group displays.
158
Add Group
4. When you have finished the PTT call, release the PTT
key.
Deleting PTT Contacts
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Highlight PTT and press the Select soft key or the
key. Using the Up or Down Navigation key, highlight PTT
Contacts and press the Select soft key or the
key.
3. Press the Options soft key, using the Up or Down
Navigation key scroll to Delete and press the Select soft
key, or Right Navigation key, or the
key. A submenu
displays.
4. The following options appear in the display:
• Selected: deletes a selected PTT contact from the PTT
Contacts list.
• All: deletes all PTT contacts in the PTT Contacts list.
5. Press the Yes soft key to confirm deletion.
Press the No soft key to return to PTT Contacts list
6. When you have finished, press the
key.
Add Group
Setting up a PTT group is a great way to quickly call a
groupofpeoplesimultaneously.Agroupcanconsistof
individuals in your PTT Contacts or other Cingular
PTT subscribers that are not in your PTT Contacts.
Creating a Group
Note: The maximum number of groups is 30 and the maximum number of
people in a group is 20 (which includes the group creator).
Section 11: Push to Talk
159
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Highlight PTT and press the Select soft key or the
.
Using the Up or Down Navigation key, highlight Add
Group and press the Select soft key or the
key.
3. Enter a name for the new group and press the OK soft
key or the
key. The Add Members screen appears in
the display.
4. Highlight the members that are to be added to the group
and press the key. Repeat this step to add additional
members to the group.
Note: A check mark displays beside each contact to be added to the new
group. Press the
key to deselect a member.
5. Press the Options soft key and select Add.
Alternatively, select Add New to create and add a new
contact to the group.
Note: We need to state here that adding person to a group that is not
already in your PTT Contacts will not add them to your PTT Contacts.
6. The Sending Create Group Request popup displays and
a group invitations is sent to each contact for there
acceptance.
Note: The Invitation In Progress icon
at least one member accepts.
will display next to the group until
Note: When a participant accepts your invitation the group is now in their
PTT Contacts and they may also place calls to the group.
160
Add Group
Note: You may have up to 30 groups in your PTT Contacts.
Adding Members to a Group from PTT Contacts
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Highlight PTT and press the Select soft key or the
key. Using the Up or Down Navigation key, scroll to PTT
Contacts and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, scroll to the
desired group and press the Options soft key.
4. Select Edit and press the Select soft key, or the Right
Navigation key, or the
key. A submenu appears in the
display.
5. Highlight Add a Member and press the Select soft key
or the key.
6. Highlight members and press the
key. A check mark
will display beside the selected members. Repeat this
step until you have desired members.
7. Press the Options soft key, highlight Add and press the
Select soft key or the
key.
Note: Adding and Deleting of groups can only be possible for groups that
user has created.
Deleting a Member from a Group
Note: When deleting a member from a group, the deleted member will
receive a PTT Message that they have been deleted.
1. In Idle mode, press the Menu soft key to access menu
Section 11: Push to Talk
161
mode.
2. Highlight PTT and press the Select soft key or the
key. Using the Up or Down Navigation key, highlight PTT
Contacts and press the Select soft key or the
3. Using the Up or Down Navigation key, scroll to a Group
and press the key. The contacts associated with the
key.
group appear in the display.
4. Using the Up or Down Navigation key, highlight the
contact(s) to be deleted, and press the Options soft key.
5. Using the Up or Down Navigation key, scroll to Delete
and press the Select soft key, or Right Navigation key, or
the
key. A submenu appears in the displays.
6. Choose from the following options:
• Selected: deletes a selected PTT contact from the Group
members list.
• All: deletes all PTT contacts in the Group members list.
7. Make selection and press the Yes soft key to confirm
deletion.
Alternatively, press the No soft key to return to PTT
Contacts list
8. When you have finished, press the End key
Deleting a Group
Note: When deleting a group, all members will receive a PTT Message that
the group has been deleted.
1. In Idle mode, press the Menu soft key to access menu
mode.
162
Making a PTT Call
2. Highlight PTT and press the Select soft key or the
key. Using the Up or Down Navigation key, highlight PTT
Contacts and press the Select soft key or the key.
3. Using the Up or Down Navigation key, scroll to a Group
and select a Group.
4. Press the Options soft key, highlight Delete and press
the Select soft key or the
.
Making a PTT Call
APTTcallcanonlybemadetoindividualsorgroupsyou
have established in your PTT Contacts. See PTT Contacts
for detailed information on Add Group and Contacts.
1. Press the PTT key to access your contact list.
Note: To access PTT call log, press and hold the PTT key.
Alternatively, select the individual or group you want to
call. Make sure an available icon is displayed beside the
individual or group.
2. Press and hold the PTT key to activate the call
Receiving a PTT Call
For the best experience your ringer should be set to the
highest volume.
1. If your status is Available you will hear a PTT Call tone
and the caller's voice.
2. If your status is Vibrate All your phone will vibrate and
then you must press Accept or Reject soft key.
ⅷ If you select Accept the call plays the callers voice over the
earpiece
Section 11: Push to Talk
163
ⅷ If you select Reject the call will terminate.
Note: Rejected PTT calls are not forwarded to voicemail.
• If set to Silent there will be no call notification tone.
PresstheOptionssoftkeytodisplaythefollowingPTTIn
Use Options
• Convert to Cellular: allows you to convert the PTT call to a
cellular call.
• Message: allows you to create and send a text message, a
multimedia message, or an Email to the PTT contact.
• Hold: allows you to place a PTT call on hold.
Convert a PTT Call
To convert a PTT call to a cellular call, use the following
steps.
Note: Convert to cellular can only be executed by the originator of a call.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Highlight PTT and press the Select soft key or the
key. Select PTT Contacts and press the Select soft key
or the
key.
3. Select PTT Contacts and press the Select soft key or the
key.
4. Use the Up or Down Navigation keys to select a contact.
5. Press and hold the PTT key to establish a connection.
6. Press
Options. Convert to Cellular is highlighted.
7. Press the Select soft key or the
key. The call is
converted to a cellular call.
164
PTT Settings
PTT Settings
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Highlight PTT and press the Select soft key or the
key. Select PTT Settings and press the Select soft key
or the
key. Choose from the following options:
• My Availability: this option allows you to change your
Availability status. Use the Up or Down Navigation key, to
highlight Do Not Disturb or Available and press the
Select soft key or the
key.
• Contact Alerts: this option allows you to be alerted when
the availability status of a contact changes from Unavailable
or Do Not Disturb to Available or Silent/Vibrate.
Press the Select soft key or the
from PTT Contacts will display. Press the
key, a list of individuals
key, to select
those individuals for whom you want to receive alerts.
Note: A check mark will display beside each selected contact.
Press the OK soft key or the
key to start receiving
alerts for availability changes until you deselect them.
Note: An alert consist of a tone as well as a PTT message when you access
the PTT menu.
• Set Your Name: when you initialized service you set your
name.
Press the Select soft key or the
key, using the
keypad enter a new name or edit the existing name.
Note: Changing your name will not impact invitations already sent but will
be reflected in future invitations.
Section 11: Push to Talk
165
• Auto Accept Invites: allows you to automatically accept
invitations from other Cingular PTT users.
Press the Select soft key or the
Down Navigation key to highlight On or Off and press
the OK soft key or the key.
key. Use the Up or
• PTT Is ON: this options allows you to turn your PTT Service
Off or On.
Press the Select soft key or the
Down Navigation key to highlight Off or On and press
the OK soft key or the key.
key. Use the Up or
• Sort Options: this option allows you to sort your PTT
Contacts list Alphabetically or by Availability.
Press the Select soft key or the
key, Use the Up or
Down Navigation key to highlight Off or On and press
the OK soft key or the
key.
Voice Message
You can use PTT to instantly send voice messages to an
individual or group.
1. Press the PTT key to display your PTT Contacts.
2. Highlight the person or group to receive the message or
using the
key "checkmark" up to 6 individuals to
receive the message.
3. Select Options and then Voice Message.
4. Pushing the PTT key will begin the recording of your
message.
5. Releasing the PTT key ends the recording and
deposits your message.
166
Call Waiting
Call Waiting
• While on a PTT call you will be notified of incoming PTT calls.
• Accepting the incoming PTT call suspends the first call.
• Rejecting the incoming PTT call terminates it.
• While on a PTT call you will be notified of incoming cellular
calls.
• Accepting the incoming cellular call suspends the PTT call.
• Rejecting the incoming cellular call forwards it to voicemail.
• While on a cellular call you will be notified of incoming PTT
calls.
• Accepting the incoming PTT call suspends the cellular call.
• Rejecting the incoming PTT call terminates it.
Help
The help menu provides brief descriptions for the
following topics:
• Service Provider
• Log In/Log Out
• Key Configuration
• PTT Contact
• Add Contact
• Add Group
• PTT Settings
• Pending Invitations
Section 11: Push to Talk
167
168
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Yourwirelessphoneisaradiotransmitterandreceiver. It
isdesignedandmanufacturednottoexceedtheexposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government. TheseFCCexposurelimitsarederivedfrom
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressed in units of watts per kilogram (W/kg). The
FCC requires wireless phones to comply with a safety
limit of 1.6 watts per kilogram (1.6 W/kg). The FCC
exposurelimitincorporatesasubstantialmarginofsafety
to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
testedfrequencybands. AlthoughtheSARisdetermined
170
Health and Safety Information
at the highest certified power level, the actual SAR level
of the phone while operating can be well below the
maximumvalue. Thisisbecausethephoneisdesignedto
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closer you are to a wireless base station antenna, the
lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body)as required by the FCC. Body-worn operations are
restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.3 cm separation between the
device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with the
above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
thismobile phonewithallreportedSAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 12: Health and Safety Information
171
GSM 850
ⅷ Head: 1.37 W/Kg.
ⅷ Body-worn: 0.669 W/Kg.
PCS 1900
ⅷ Head: 1.25 W/Kg.
ⅷ Body-worn: 0.280 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may benecessary toremove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
anditshouldprovidevaluesfortypicalormaximumSAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Thetermwirelessphonerefersheretohand-heldwireless
phones with built-in antennas, often called "cell,"
"mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio
172
Consumer Information on Wireless Phones
frequency energy (RF) because of the short distance
between the phone and the user's head. These RF
exposures are limited by Federal Communications
Commissionsafetyguidelinesthatweredevelopedwith
the advice of FDA and other federal health and safety
agencies. When the phone is located at greater distances
from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called
"cordless phones," which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
whe n i n the stand -b y mo de . Wh ere as hi gh l ev e ls o f RF ca n
producehealtheffects(byheatingtissue),exposuretolow
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RFexposureshavenotfoundanybiologicaleffects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additionalresearch. Insomecases,otherresearchershave
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
Section 12: Health and Safety Information
173
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
ormedicaldevices. However,theagencyhasauthorityto
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. Insuchacase,FDAcouldrequirethemanufacturers
ofwirelessphonestonotifyusersofthehealthhazardand
torepair,replaceorrecallthephonessothatthehazardno
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
174
Consumer Information on Wireless Phones
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
thosetheycangetfromwirelessphones. Basestationsare
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
Section 12: Health and Safety Information
175
development used animals that had been genetically
engineeredortreatedwithcancer-causingchemicalssoas
to be pre-disposed to develop cancer in absence of RF
exposure.
OtherstudiesexposedtheanimalstoRFforupto22hours
perday. Theseconditionsarenotsimilartotheconditions
under which people use wireless phones, so we don't
knowwithcertaintywhattheresultsofsuchstudiesmean
for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, oracousticneuroma, tumorsofthebrainor
salivary gland, leukemia, or other cancers. None of the
studiesdemonstratedtheexistenceofanyharmfulhealth
effects from wireless phones RF exposures. However,
noneofthestudiescananswerquestionsaboutlong-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
Acombinationoflaboratorystudiesandepidemiological
studies of people actually using wireless phones would
providesomeofthedatathatareneeded. Lifetimeanimal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
datathatisdirectlyapplicabletohumanpopulations,but
ten or more years' follow-up may be needed to provide
176
Consumer Information on Wireless Phones
answersaboutsomehealtheffects,suchascancer. Thisis
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
theydo-maybemany,manyyears. Theinterpretationof
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
OrganizationinternationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
ofresearchneedsthathasdriventheestablishmentofnew
researchprogramsaroundtheworld. TheProjecthasalso
helpeddevelopaseriesofpublicinformationdocuments
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
andDevelopmentAgreement(CRADA)todoresearchon
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
Section 12: Health and Safety Information
177
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But
if you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducingtheamountoftimespentusingawirelessphone
will reduce RF exposure.
• "If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again,thescientificdatadonotdemonstratethatwireless
phonesareharmful. ButifyouareconcernedabouttheRF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
Thescientificevidencedoesnotshowadangertousersof
wirelessphones,includingchildrenandteenagers. Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
178
Consumer Information on Wireless Phones
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
theUnitedKingdomdistributedleafletscontainingsuch
arecommendationinDecember2000. Theynotedthatno
evidence exists that using a wireless phone causes brain
tumorsorotherilleffects. Theirrecommendationtolimit
wireless phone use by children was strictly
precautionary;itwasnotbasedonscientificevidencethat
any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energyintheheadbecausethephone, whichisthesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhethertheyareusedagainst
theheadoragainstthebody. Eitherconfigurationshould
result in compliance with the safety limit.
Section 12: Health and Safety Information
179
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believethataccessories that claim toshieldtheheadfrom
thoseemissionsreducerisks. Someproductsthatclaimto
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessoryattachedtothephone. Studieshaveshownthat
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
FederaltradeCommission(FTC)chargedtwocompanies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendantslackedareasonablebasistosubstantiatetheir
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
180
Consumer Information on Wireless Phones
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
anddefibrillatorsaresafefromwirelessphoneEMI. FDA
has tested wireless phones and helped develop a
voluntary standard sponsored by the Institute of
ElectricalandElectronicEngineers(IEEE). Thisstandard
specifiestestmethodsandperformancerequirementsfor
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactionswith other medical devices. Should
harmfulinterferencebefoundtooccur,FDAwillconduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
Section 12: Health and Safety Information
181
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicatebyvoice,almostanywhere,anytime.Butan
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
182
Road Safety
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
Section 12: Health and Safety Information
183
"The wireless industry reminds you to use your phone safely
when driving."
Formoreinformation,pleasecall1-888-901-SAFE,orvisit
our web-site www.wow-com.com
Provided by theCellularTelecommunications& Internet
Association
Operating Environment
Remember to follow any special regulations in force in
any area
and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder).
Using Your Phone Near Other Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
184
Using Your Phone Near Other Electronic Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independentresearchandrecommendationsofWireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
Ifyouuseanyotherpersonalmedicaldevices,consultthe
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.Switchyourphoneoffinhealthcarefacilities
whenanyregulationspostedintheseareasinstructyouto
Section 12: Health and Safety Information
185
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consultthemanufacturerofanyequipmentthathasbeen
added to your vehicle.
Posted Facilities
Switchyourphoneoffinanyfacilitywherepostednotices
requireyou to do so.
Potentially Explosive Environments
Switchyourphoneoffwheninanyareawithapotentially
explosiveatmosphereandobeyallsignsandinstructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas),chemicalplantsorwhereblastingoperationsarein
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
186
Emergency Calls
other areawhereyouwould normallybe advised toturn
off your vehicle engine.
Emergency Calls
Thisphone,likeanywirelessphone,operatesusingradio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connectioninallconditions.Therefore,youshouldnever
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,tomakeorreceiveanycallsthephonemustbe
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
youmayfirstneedtodeactivatethosefeaturesbeforeyou
can make an emergency call. Consult this document and
your local cellular service provider.
Whenmakinganemergencycall,remembertogiveallthe
necessary information as accurately as possible.
Remember that your phone may be the only means of
Section 12: Health and Safety Information
187
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others,damagethephoneormakecallsthatincreaseyour
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
orbutane)mustcomplywiththeNationalFireProtection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
188
Other Important Safety Information
Althoughyourphoneisquitesturdy,itisacomplexpiece
of equipment and can be broken. Avoid dropping,
hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Section 12: Health and Safety Information
189
Ifyou'reinsideabuilding, beingnearawindowmaygive
you better reception.
Understanding the Power Save Feature
If your phone is unableto finda signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-extended and over
your shoulder.
190
Availability of Various Features/Ring Tones
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Notallfeaturesareavailableforpurchaseor use
in all areas. Downloadable Ring Tones may be available
at an additional cost. Other conditions and restrictions
may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
Section 12: Health and Safety Information
191
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
192
Care and Maintenance
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligationsandallowyoutoenjoythisproductformany
years
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
Section 12: Health and Safety Information
193
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
194
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
196
Standard Limited Warranty
products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited
Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the
battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been
used in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase, theserialnumber of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
Section 13: Warranty Information
197
replaced leather cases, pouches and holsters will be
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
equal to the remainder of the original Limited Warranty
on the original Product or for 90 ays, whichever is longer.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• "THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• "WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• "DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• "THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• "COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
198
Standard Limited Warranty
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND
RESULTING FROM THE PURCHASE, USE, OR
MISUSEOF,ORINABILITYTOUSETHEPRODUCTOR
ARISINGDIRECTLYORINDIRECTLYFROMTHEUSE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACHOFTHEEXPRESSWARRANTY,INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT
Section 13: Warranty Information
199
APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TOSTATE/PROVINCETO PROVINCE. THISLIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THEORIGINALPURCHASEROF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE
OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATEANYSUCHSOFTWAREOREQUIPMENT
WITHTHEPRODUCT. THEQUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
200
Standard Limited Warranty
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005SamsungTelecommunicationsAmerica.Allrights
reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Section 13: Warranty Information
201
202
Command Keys 23
Converter 141
D
Index
A
Dialing a Number
Address Book 62
Display
Accessing a Menu Func-
tion 38
Address Book
Searching for a Number
icons 20
Display Settings 108
E
End key 24
Ending a Call 28
Entering Text 47
Changing the Text Entry
Mode 48
Alerts on Call 113
Alphabet mode 48
Audio List 140
B
Battery
charging 9
installing 8
low indicator 10
removing 6
Using Alphabet Mode 58
Using Numbers 59
Using Symbols 59
Using T9 Mode 56
C
External Display 20
Call Functions 27
Adjusting the Call Volume
F
Functions and Options 22
G
Answering a Call 30
Correcting the Number
Making a Call 28
Quiet Mode 32
Recent Calls 31
Redialing Last Number
Getting Started 5
Activating Your Phone 6
Voicemail 11
Greeting Message 106
H
Health and Safety Infor-
mation 169
Charging battery 9
Clear key 24
I
Icons, description 20
203
International Call 28
P
K
Personal Assistant 127
Alarm 128
Keypad Tone 111
Calculator 139
Calendar 130
L
Left soft key 23
Phone
Low battery indicator 10
icons 20
M
Powering on/off
phone 10
Making a Call
Address Book 29
Memo
PTT
Call Me Alert 156
Dynamic Call 158
Quick Group 156
Quick Group Shortcut
Writing 134
Menu Navigation 37
Menu Outline 40
Messaging 77
Types of Messages 78
Viewing Push To Talk
Contacts 155
Missed Call
Deleting 31
Viewing 31
Multimedia Files
Downloading 148
Mute 34
PTT Contact Options 156
PTT Group Options 157
Push To Talk 151
Add Contacts 155
Add Group 159
N
Help 167
Navigation key 25
Network Selection 115
Network Services
Call Forwarding 113
Number mode 48
Making a PTT Call 163
PTT Icons 152
PTT Settings 165
R
Record
Voice Memo 139
Record Audio 139
Right soft key 24
O
Options
During a Call 33
Putting a Call on Hold 33
204
S
U
Security 121
Send key 24
Service Dialing Numbers
Understanding Your Ad-
dress book 61
Adding a New Contact 63
Group 67
Management 72
Settings 103
Sound Settings 110
Shortcuts 39
My Name Card 71
Own Phone Number 72
Speed Dial 69
SIM card
installing 7
removing 7
Using Contacts List 62
UnderstandingYourPhone
Soft Keys 23
Features of Your Phone
Speakerphone Key 26
Speed Dial
Front View of Your Phone
Open View of Your Phone
Setting Up Entries 69
Standard Limited Warran-
ty
Using Management
Checking the Memory
Status 74
Storing a Number
Storing a number
Phone’s Memory 63
SIM Card 65
Copying all to Phone 73
Default Saving 72
Deleting all of the Phone
book Entries 73
T
V
T9 Mode
Viewing an Event 136
Viewing Push To Talk Con-
tacts 155
enter a word 56
T9 mode 48
Text Input Mode
Changing 48
Text Messages 79
Travel adapter 9
Voice Mail 11
changing number 12
W
Warranty Information 195
205
206
|