* Some of the contents in this manual may differ from
your phone, depending on the software installed or
your service provider.
DUAL BAND
GPRS TELEPHONE
SGH-X430
ELECTRONICS
Printed in Korea
Code No.: GH68-04623A
English. 11/2003. Rev. 1.0
World Wide Web
Contents
Important Safety Precautions .......................... 7
Unpacking ........................................................ 9
Your Phone..................................................... 10
Phone Layout.................................................... 10
Display............................................................. 13
Service Light..................................................... 16
Getting Started............................................... 17
Installing the SIM Card....................................... 17
Charging the Battery.......................................... 19
Switching the Phone On or Off............................. 21
Call Functions................................................. 22
Making a Call .................................................... 22
Adjusting the Volume......................................... 24
Answering a Call................................................ 25
Viewing Missed Calls .......................................... 26
Switching Quickly to the Silent Mode.................... 28
Selecting Functions and Options..................... 29
Phonebook ..................................................... 31
Storing a Number with a Name............................ 31
Using Phonebook Entry Options ........................... 33
Searching for a Number in Phonebook.................. 35
Editing a Caller Group ........................................ 37
Speed-dialling................................................... 37
Deleting All of the Phonebook Entries ................... 39
Checking the Memory Status............................... 40
Entering Text.................................................. 41
Changing the Text Input Mode ............................ 42
Using the T9 Mode............................................. 43
Using the Upper/Lower-case Character Mode......... 44
Using the Symbol Mode...................................... 46
Using the Number Mode ..................................... 46
3
2
Contents
Contents
Options During a Call...................................... 47
Sound Settings............................................... 84
Putting a Call on Hold......................................... 47
Switching the Microphone Off (Mute).................... 48
Muting/Sending Key Tones.................................. 49
Sending DTMF Tones.......................................... 49
Searching for a Number in Phonebook.................. 50
Using the Message Service.................................. 50
Answering a Second Call..................................... 51
Making a Multi-party Call .................................... 51
Ring Tone (Menu 4.1) ......................................... 84
Ring Volume (Menu 4.2)...................................... 84
Alert Type (Menu 4.3)......................................... 85
Keypad Tone (Menu 4.4) ..................................... 85
Message Tone (Menu 4.5).................................... 86
Folder Tone (Menu 4.6)....................................... 87
Power On/Off (Menu 4.7) .................................... 87
Extra Tones (Menu 4.8)....................................... 87
Using the Menus............................................. 54
Phone Settings ............................................... 89
Accessing a Menu Function by Scrolling ................ 54
Accessing a Menu Function by Using its Shortcut ... 55
List of Menu Functions........................................ 55
My Settings (Menu 5.1)....................................... 89
Greeting Message (Menu 5.2) .............................. 90
Own Number (Menu 5.3)..................................... 90
Language (Menu 5.4).......................................... 91
Security (Menu 5.5).................................................. 91
Display Settings (Menu 5.6) ................................ 94
Extra Settings (Menu 5.7) ................................... 96
Short Cut (Menu 5.8).......................................... 97
Reset Settings (Menu 5.9) ................................... 97
Text Messages................................................ 61
Inbox (Menu 1.1) ............................................... 61
Outbox (Menu 1.2) ............................................. 63
Write New (Menu 1.3)......................................... 64
Templates (Menu 1.4)......................................... 66
Settings (Menu 1.5)............................................ 67
My Objects (Menu 1.6)........................................ 68
Memory Status (Menu 1.7)....................................... 69
Voice Mail (Menu 1.8) ......................................... 70
Broadcast (Menu 1.9) ......................................... 71
Organiser ....................................................... 98
Calendar (Menu 6.1)................................................. 98
To Do List (Menu 6.2)............................................. 101
Time & Date (Menu 6.3) ......................................... 104
Alarm (Menu 6.4) ................................................... 105
Calculator (Menu 6.5)............................................. 106
Currency Exchange (Menu 6.6) ........................... 107
Picture Messages............................................ 73
Inbox (Menu 2.1) ............................................... 73
Outbox (Menu 2.2) ............................................. 75
Write New (Menu 2.3)......................................... 76
Delete All (Menu 2.4).......................................... 78
Setup (Menu 2.5)............................................... 78
MMS Profile (Menu 2.6) ............................................ 79
Network Services ......................................... 108
Call Diverting (Menu 7.1) ................................... 108
Call Barring (Menu 7.2) .......................................... 110
Call Waiting (Menu 7.3).......................................... 112
Network Selection (Menu 7.4)............................. 113
Caller ID (Menu 7.5).......................................... 114
Closed User Group (CUG) (Menu 7.6)..................... 114
Call Records ................................................... 81
Missed Calls (Menu 3.1)............................................ 81
Received Calls (Menu 3.2) ................................... 81
Dialled Calls (Menu 3.3) ...................................... 82
Delete All (Menu 3.4).......................................... 82
Call Time (Menu 3.5) ................................................ 82
Call Cost (Menu 3.6)................................................. 83
5
4
Contents
Funbox ......................................................... 117
Games (Menu 8.1)............................................. 117
WAP Browser (Menu 8.2).................................... 118
Downloads (Menu 8.3) ....................................... 124
Solving Problems.......................................... 127
Access Codes................................................ 130
Phone Password ............................................... 130
PIN................................................................. 131
PUK................................................................ 131
PIN2............................................................... 132
PUK2 .............................................................. 132
Barring Password.............................................. 133
Health and Safety Information ..................... 134
Exposure to Radio-Frequency Energy
(SAR Information) ............................................ 134
Precautions When Using Batteries....................... 135
Road Safety..................................................... 137
Operating Environment ..................................... 139
Electronic Devices............................................. 139
Potentially Explosive Atmospheres ...................... 141
Emergency Calls............................................... 142
Other Important Safety Information.................... 143
Care and Maintenance....................................... 144
Glossary ....................................................... 146
Index ........................................................... 151
Quick Reference Card ................................... 155
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Sensible Use
Unpacking
Your package contains the following items:
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
Handset
Travel Adapter
then press the
key. If certain features are in
use, deactivate those features before you can make
an emergency call. Give all the necessary
information as accurately as possible. Do not cut off
the call until given permission to do so.
Ear-microphone
Handstrap
Battery
Water Resistance
Your phone is not water-resistance. Keep it dry.
Accessories and Batteries
User’s Manual
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be dangerous.
The items supplied with your phone may be
different depending on your country.
Qualified Service
Only qualified service personnel may install or
repair your phone.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Ear-microphone
• Car holder
For more detailed safety information, see “Health
and Safety Information” on page 134.
• Simple hands-free kit
• Standard/slim batteries
• Cigarette lighter adapter
• Data link cable
8
9
Your Phone
Your Phone
Key(s) Description
In Menu Mode, scroll through the
Phone Layout
menu options and Phonebook
memory.
The following illustrations show the main elements
of your phone:
In Idle Mode, allow you to access your
favourite menu options directly. For
further details about shortcuts, see
page 97.
Earpiece
In Menu Mode, returns to the previous
menu level and selects the current
menu respectively.
Folder
Display
When entering text, moves the cursor
to the left and right respectively.
In Idle Mode,
the Write New and allows you to
allows you to access
WAP Browser
key
Navigation keys
Soft key (right)
Power on/off /
menu exit key
access the Ring Tone menu option.
Ear-microphone
jack
Perform the functions indicated by the
text above them, on the bottom line of
the display.
Soft key (left)
Volume/menu
browse keys
Alphanumeric
keys
(soft keys)
Dial/menu
confirmation key
In Idle Mode, quickly launches the
WAP (Wireless Application Protocol)
browser.
Cancel/
Microphone
correction key
Special
function keys
Deletes characters from the display.
In Menu Mode, returns to the previous
menu level.
Antenna
Service light
10
11
Your Phone
Your Phone
Display
Key(s) Description (continued)
Makes or answers a call.
Display Layout
When held down in Idle Mode, recalls
the last number dialled or received.
The display has three areas:
In Menu Mode, selects a menu
function or stores information that you
have entered, such as a name in the
phone or SIM memory.
Icons
Text and
graphic area
Ends a call. Also switches the phone
on and off when held down.
In Menu Mode, cancels your input and
returns to Idle Mode.
Soft key
indications
Menu
Name
In Idle Mode, quickly accesses your
voice mail when held down.
Area
Description
First line
Displays various icons. See
page 14.
Enter numbers, letters and some
special characters.
Middle lines
Display messages, instructions
and any information that you
enter, number to be dialled, for
example.
Enter special characters.
Perform various functions.
Last line
Shows the functions currently
assigned to the two soft keys.
(on the side of the phone)
During a call, adjust the earpiece
volume.
In Idle Mode, adjust the keypad tone
volume.
In Menu Mode, scroll through the
menu options and Phonebook
memory.
12
13
Your Phone
Your Phone
Icons
Icon Description
Icon Description (continued)
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when a call is in progress.
Appears when you are out of your home
area and have logged onto a different
network, for example, when travelling in
other countries.
Backlight
A backlight illuminates the display and keypad.
When you press any key or open the folder, the
backlight turns on. It turns off if no key is pressed
within a given period of time, depending on the
Back Light menu option. After one minute, the
display turns off to conserve your battery power.
Appears when you are connected to the
GPRS network.
Appears when a new text message has
been received.
To specify the length of time for which the backlight
is active, set the Back Light menu option (Menu
5.6.2). See page 94 for further details.
Appears when a new voice mail message
has been received.
You can also set the phone to use the backlight only
during a specified period of time, in the Auto Light
menu option (Menu 5.6.3). See page 94 for further
details.
Appears when you are entering text to
indicate the current text mode.
Appears when you set an alarm to ring at a
specified time.
Appears when the silent mode is active or
you set the Alert Type menu option
(Menu 4.3), so that the phone vibrates
when you receive a call. For further details,
see page 28 and page 85 respectively.
Appears when the mute mode is active.
14
15
Your Phone
Getting Started
Service Light
Installing the SIM Card
The service light is on the folder. It flashes when
services are available on the phone.
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
To activate or deactivate the use of the service
light, set the Service Light menu option (Menu
5.6.4). See page 95 for further details.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches
or bending, so be careful when
handling, inserting or removing the
card.
Keep all SIM cards out of the reach of
small children.
Service light
1. If necessary, switch off the phone by holding
down the
displays.
key until the power-off image
2. Remove the battery. To do so:
➀ Pull and hold the battery lock above the
battery toward the top of the phone.
➁ Lift the battery away, as shown.
16
17
Getting Started
Getting Started
5. Press the battery down until it clicks into place.
Make sure that the battery is properly installed
before switching the phone on.
3. Slide the SIM card into the SIM card socket so
that it locks the card into position.
Make sure that the notched corner is at the
bottom left and the gold contacts of the card
face into the phone.
Charging the Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone for
charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for
further details.
Note: When you need to remove the SIM card, slide
it, as shown, and take it out of the socket.
You can use the phone while the battery is
charging, but this causes the phone to charge more
slowly.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
4. Place the battery so that the tabs on the end
align with the slots at the bottom of the phone.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
18
19
Getting Started
Getting Started
Switching the Phone On or Off
2. Plug the adapter into a standard AC wall outlet.
1. Open the folder.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
2. Hold down the
switches on.
key until the phone
3. If the phone asks you to enter the phone
password, enter the password and press the OK
soft key. The phone password is preset to
“00000000” at the factory. For further details,
see page 130.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 131.
The phone searches for your network and after
finding it, the idle screen, illustrated below,
appears on the display. Now, you can make or
receive a call.
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
When the battery level gets too low, the phone
turns off automatically.
Menu
Name
Note: The display language is preset to English at
the factory. To change the language, use
the Language menu option (Menu 5.4).
For further details, see page 91.
5. When you wish to switch the phone off, hold
down the
displays.
key until the power-off image
20
21
Call Functions
Call Functions
Ending a Call
Making a Call
When you want to finish your call, briefly press the
key.
When the idle screen displays, enter the area code,
phone number and press the key.
Redialling the Last Number
Note: If you have checked the Auto Redial option in
the Extra Settings menu (Menu 5.7), the
number is redialled automatically up to ten
times when the person does not answer the
call or is already on the phone. See page 96 for
further details.
The phone stores the numbers you dialled, received
or missed if the caller is identified. See “Call
Records” on page 81 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
Making an International Call
press the
key to return to Idle Mode.
1. Press and hold the 0 key.
2. Press the
key to display a list of the last
The + character appears.
numbers in the order in which the calls were
made.
2. Enter the country code, area code and phone
number and press the
key.
3. Use the
and
keys to scroll through the
numbers until the number you want highlights.
Correcting the Number
4.
To
Press the
To clear
Press the
dial the number
edit the number
key.
the last digit
displayed
C key.
Edit soft key. Change
the number as required,
referring to “Correcting
the Number” on page 22
for further details.
any other digit
or key until the cursor is
in the number immediately to the right of the
digit to be cleared. Press the C
key. You can also insert a missing
digit simply by pressing the
appropriate key.
the whole
display
C key and hold it for more than
one second.
22
23
Call Functions
Call Functions
Making a Call from Phonebook
Answering a Call
You can store the phone numbers that you use
regularly in the SIM card or the phone’s memory,
which are collectively called Phonebook. Simply
select the required name to recall the associated
number. For further details about the Phonebook
features, see page 31.
When someone calls you, the phone alerts you by
ringing and displaying the incoming animation.
When the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
1. If necessary, open the folder. Press the
key
or the Accept soft key to answer the incoming
call.
Adjusting the Volume
If the Anykey Answer option in the Extra
Settings menu (Menu 5.7) is checked, you can
press any key to answer a call, except for
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
the
key and the Reject soft key. See
Press the
key to increase the volume level and
page 96 for details.
the key to decrease the level.
If the Active Folder option in the Extra
Settings menu (Menu 5.7) is checked, you can
answer the call simply by opening the folder.
See page 96 for details.
Note: To reject the call, press and hold one of the
volume keys before opening the folder, or
press the Reject soft key or
key.
2. End the call by closing the folder or pressing
the key.
Note: You can answer a call while using the
Phonebook or menu features.
In Idle Mode with the folder open, you can also
adjust the keypad tone volume using these keys.
24
25
Call Functions
Call Functions
Viewing Missed Calls
3. Press the Select soft key.
When you are unable to answer a call for any
reason, you can find out who is calling you, if this
service is available, so that you can call the person
back.
4. Change the number as required.
5. To
call the number
Press the
The number of missed calls displays on the idle
screen immediately after a call is missed.
key.
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
store the number
Save soft key and enter
the name and location
required. For further
details, see page 31.
The number corresponding to the most recent
missed call displays, if available.
Deleting a Missed Call
1. Press the Options soft key.
3. To
scroll through the
Press the
2. If necessary, press the
or
key to
or
key.
highlight the Delete option.
missed calls
3. Press the Select soft key.
call the number
displayed
key.
You can press the
key at any time to exit the
edit or delete a
Select soft key. See
Missed Call feature.
missed call number
below.
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
option (Menu 3.1). For further details, see
page 81.
Editing a Missed Call Number
Note: When the number corresponding to the missed
call is not available, the Edit Number option
does not display.
1. Press the Options soft key.
2. Press the
or
key to highlight the Edit
Number option.
26
27
Call Functions
Selecting Functions
and Options
Switching Quickly to the Silent Mode
Your phone offers a set of functions that allow you
to customise it. These functions are arranged in
menus and sub-menus, accessed via the two soft
Silent Mode is convenient when discretion is
required and you wish to stop the phone from
making noise, in a theatre for example.
keys marked
and . Each menu and sub-menu
In Idle Mode, to switch your phone quickly to the
allows you to view and alter the settings of a
particular function.
silent mode, simply press and hold down the
key
until the “Silent Mode” message and the Vibration
icon ( ) display.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current
role.
In the silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Example:
Alert Type (Menu 4.3)
Vibration
Keypad Tone (Menu 4.4) Off
Service Provider
07:30
Thu 09 Oct
Message Tone (Menu 4.5) Light Only
Folder Tone (Menu 4.6)
Power On/Off (Menu 4.7) Off
Extra Tones (Menu 4.8) OFF
Off
Menu
Name
To exit and reactivate the previous sound settings,
press and hold the key again until “Exit Silent
Mode” appears. The Vibration icon ( ) no longer
displays.
Press the right soft
key to access the
Phonebook menu.
Press the left soft
key to access Menu
Mode.
28
29
Selecting Functions and Options
Phonebook
You can store phone numbers and their
To view various functions/options available and
select the one required:
corresponding names in the memory of your SIM
card. In addition, you can store up to 500 numbers
in the phone’s memory. The SIM card and phone
memories, although physically separate, are used
as a single entity, called Phonebook.
1. Press the appropriate soft key.
2. To
select the:
Press the
Select soft key or
the key.
Storing a Number with a Name
• function displayed
• option highlighted
There are two ways to store a number:
view the next function
or highlight the next
option in a list
key or
left side of the phone.
key on the
• Using the Save soft key in Idle Mode
• Using the New Entry option in the Phonebook
menu
move back to the
previous function or
option in a list
key or
left side of the phone.
key on the
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
move back up one
level in the structure key.
key,
soft key or C
exit the structure
without changing the
settings
key.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the
further details, see page 22.
C
key. For
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
2. To save the number, press the Save soft key.
3. Choose an icon to identify the category of the
number to be stored. Three categories are
available:
•
•
•
: Mobile phone number
: Office number
: Home number
To select the category, press the or key and
press the Select soft key.
30
31
Phonebook
Phonebook
Storing a Number Using the Phonebook
Menu
4. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For further details about how to
enter characters, see page 41.
1. When the idle screen displays, press the Name
soft key.
2. Scroll to New Entry by pressing the
or
The phone now displays the first free location in
the last memory used to save a number and
name. When that memory is full, the first free
location in the other memory displays.
key and press the Select soft key.
3. Choose an icon to identify the category of the
number to be stored by pressing the or key,
and press the Select soft key.
5. Press the right soft key, labelled To Card or To
Phone, to switch between the phone and card
memories.
Note: The E-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
Note: If you change phones, any numbers stored
in your SIM card memory will automatically
be available with the new phone, whereas
any numbers stored in the phone’s memory
must be reentered.
4. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For further details about how to
enter characters, see page 41.
6. If you do not want to save the number and
name in the suggested location, press the C key
to clear the location number and enter your
preferred location by pressing the number keys.
5. Enter the number or address you want to store
and press the Save soft key.
6. Continue the procedure from Step 5 on page 32
to store the number.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phonebook
entry or name just created.
Using Phonebook Entry Options
While accessing any Phonebook entry, press the
Options soft key to access the options for the
entry.
8. To
use the entry
Press the
Options soft key.
options
Further details about the
options, see page 33.
To
Press the
return to the idle
screen
key.
select the
highlighted option
Select soft key or
the key.
32
33
Phonebook
To
Phonebook
For further details about how to change caller group
properties, see page 37.
Press the
highlight a
different option
or
key until the
Add Entry: allows you to add a new number to the
name.
required option highlights.
The following options are available:
Searching for a Number in
Phonebook
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in Phonebook, such as a
different extension in the same office.
After storing numbers in Phonebook, you can
search for them in two ways; by name and by caller
group.
Use the C key to change the number as required;
see page 22 for further details. When you are ready
to dial, press the
key.
Searching for a Number by Name
Edit: allows you to edit the Phonebook entry.
1. When the idle screen displays, press the Name
Select One Entry to change one number in the
selected name. If you change the name, the
number is saved separately
soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name that you
wish to find.
Erase: allows you to erase the name and number
from Phonebook. You are asked to confirm that you
wish to erase the name and number by pressing the
Yes soft key.
The Phonebook entries are listed, starting with
the first entry matching your input.
Copy: allows you to copy the number to another
location. Use this option to store a number similar
to one already in the memory; once copied, edit the
number and store it in Phonebook.
4. To
view the
Press the
View soft key.
highlighted entry
Caller Group: allows you to organise your
Phonebook entries in up to 10 caller groups so that
the phone alerts you in a specific way when a
person from one of your groups calls you. Select
one of ten groups available.
select a different
entry
or
key until the
entry you want is
highlighted.
look for a name
starting with a
different letter
key labelled with the
letter.
To remove an entry from a group, select the No
Group option.
34
35
Phonebook
Phonebook
Editing a Caller Group
5. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 33.
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group Edit by pressing the
or
key and press the Select soft key.
Searching for a Number by Caller Group
3. Scroll through the group list by pressing the
or key.
1. When the idle screen displays, press the Name
soft key.
4. When the group highlights, press the Options
2. Scroll to Group Search by pressing the
or
soft key.
key and press the Select soft key. You are
asked to enter a group name.
5. Select each option and change the settings, as
required. The following options are available:
3. Enter the first few letters of the group name that
you wish to find.
• Call Ring Tone: allows you to set a ring tone
to be used when you receive a voice call from
a person in the group.
The caller groups are listed, starting with the
first group matching your input.
• SMS Tone: allows you to set a ring tone to be
used when you receive a text message from a
person in the group.
4. Scroll to the group you want by pressing the
or
key and press the View soft key.
The Phonebook entries in the caller group are
listed.
• Graphic: allows you to set a graphic icon to
be displayed when you receive a voice call
from a person in the group.
5. To
Press the
• Group Name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 41.
view the highlighted
entry
View soft key.
6. When you finish changing the settings, press the
select a different
entry
or
key until the
C or
key.
entry you want
highlights.
6. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 33.
Speed-dialling
Once you have stored phone numbers in the SIM
card, you can set up to eight speed-dial entries and
then dial them easily whenever you want, simply by
pressing the associated number key.
36
37
Phonebook
Phonebook
Setting Up Speed-dial Entries
Speed-dialling from Phonebook
To speed-dial the numbers assigned to keys 2 to 9,
press and hold the appropriate key.
1. When the idle screen displays, press the Name
soft key.
Note: Memory location 1 is reserved for your Voice Mail
2. Scroll to Speed Dial by pressing the
or
server number.
key and press the Select soft key.
3. Select the key to which you wish to assign the
speed-dialling number, from the 2 to 9 key, and
press the OK soft key.
Deleting All of the Phonebook Entries
Note: If you have already assigned a number to
the key, the Options soft key replaces the
OK soft key. Go to Step 6.
You can delete all of entries in the selected memory
or both memories.
1. When the idle screen displays, press the Name
4. Select a Phonebook entry from the list and press
soft key.
the View soft key.
2. Scroll to Delete All by pressing the
or
5. Select a number, if the entry has more than one
key and press the Select soft key.
number, by pressing the
press the Select soft key.
or
key and
3. To place a check mark by the memory you want
to empty, All, Card Memory, or Phone Memory,
press the Mark soft key.
6. Once you have assigned a number to the
selected key, you can use the following options
by pressing the Options soft key:
4. You can remove the check mark by pressing the
Unmark soft key.
• Change: allows you to assign a different
number to the key.
5. When you are finished marking, press the Delete
soft key to delete the entries in the selected
memory.
• Erase: allows you to clear the setting so that
no number is assigned to the key.
6. Enter the phone password and press the OK soft
• Erase All: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
key.
Note: The password is preset to “00000000” at the
• Number: allows you to view the number
assigned to the key.
factory. To change it, see page 92.
7. When the confirming message appears, press the
7. When you finish setting the options, press the C
Yes soft key.
or
key.
To cancel the deletion, press the No soft key.
38
39
Phonebook
Entering Text
When using your phone, you will often need to
enter text, such as, when storing a name in
Phonebook, creating your personal greeting or
scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
Checking the Memory Status
You can check how many names and numbers are
stored in Phonebook; SIM card and phone
memories. You can also see the capacity of both
memories.
Your phone has the following text input modes:
1. When the idle screen displays, press the Name
• T9 mode
soft key.
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the 5
key once, J, K or L displays. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the
correct word, thus requiring far fewer keystrokes
than the traditional upper/lower-case character
modes.
2. Select the Memory Status option by pressing
the
or
key and press the Select soft
key.
3. Press the
or
key to view the number of
existing and remaining entries in the SIM card
and phone memories.
4. When you finish checking, press the C or
key.
• Upper/Lower-case character mode
These modes allow you to enter letters by
pressing the key labelled with the required letter
once, twice, three or four times until the letter
displays.
• Symbol mode
This mode allows you to enter various symbols
and special characters.
• Number mode
This mode allows you to enter numbers.
40
41
Entering Text
Entering Text
Using the T9 Mode
Changing the Text Input Mode
The T9 predictive text input mode allows you to
enter any character using single keystrokes. This
text input mode is based on a built-in dictionary.
When you are in a field that allows characters to be
entered, you should notice the text input mode
indicator on the display.
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys 2
to 9. Press each key only once for one letter.
Example: Writing a text message
Text input mode
indicator
Example: To enter “HELLO” in the T9 mode,
press the 4, 3, 5, 5 and 6 keys.
The word that you are typing appears on the
display. It may change with each key that you
press.
Options
918
2. Enter the whole word before editing or deleting
the keystrokes.
3. If the word is correct, start entering the next
word.
To select the
Press the
until
soft key
Otherwise, press the 0,
or
key to
display alternative word choices for the keys
that you have pressed.
T9 mode
displays.
See page 43.
Example: Both “OF” and “ME” have the
sequence of the 6 and 3 keys. The
phone displays the most commonly
used choice first.
Upper-case
character mode
displays.
See page 44.
Lower-case
displays.
character mode
See page 44.
4. Put a space between words by pressing the
key.
Symbol mode
Number mode
displays.
See page 46.
• To type words not found in the T9 mode, change
the text input mode to the upper/lower-case
character input mode.
displays.
See page 46.
42
43
Entering Text
Entering Text
• To enter full stops, hyphens or apostrophes, press
the 1 key. The T9 mode applies grammar rules to
ensure that the correct punctuation is used.
Refer to the table below for more information about
the characters available.
Characters in the Order Displayed
Key
Example: the 1 key is used twice to display two
Lower Case
Upper Case
punctuation marks:
Space
L
E
T
’
S
E
A
T
.
• To shift the case in the T9 mode, use the
key.
There are two cases; Capital Lock ( ) and Initial
Capital ( ).
• You can move the cursor by using the and
keys. To delete letters, press the C key. Press and
hold the C key to clear the display.
Note: The characters available may be different
depending on your language setting (Menu
5.4).
Using the Upper/Lower-case
Character Mode
• To insert a space, press the
key.
Use the 1 to 0 keys to enter your text.
• You can move the cursor by using the and
keys. To delete letters, press the C key. Press and
hold the C key to clear the display.
1. Press the keys labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
to the right automatically, and then select the
next letter.
44
45
Entering Text
Using the Symbol Mode
The symbol mode enables you to insert symbols
into a text message.
OK
918
Use the navigation keys to scroll to the symbol you
want to enter and then press the OK soft key to
insert the highlighted symbol into your message.
Using the Number Mode
The Number mode enables you to enter numbers
into a text message. Press the keys corresponding
to the digits you want to enter.
46
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service. When you have an active call and a call on
hold, you may switch between the two calls,
changing the one on hold to active and placing the
other on hold.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
47
Options During a Call
Options During a Call
To switch between the two calls, simply press the
Swap soft key.
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute Keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
When you want to finish, end each call normally by
pressing the
key.
Note: To communicate with answering machines or
computerised telephone systems, the Send
Keys option must be selected.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Sending DTMF Tones
You can send the DTMF (dual tone multi-frequency)
tones corresponding to a number entered during a
call.
Example: You wish to say something to another
person in the room but do not want the
other person to hear you.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
To switch the microphone off temporarily:
1. Press the Options soft key.
To send the DTMF tones:
2. If necessary, press the
key to highlight the
1. When you are connected to the teleservice
Mute option.
system, press the Options soft key.
3. Press the OK soft key.
2. Press the
option.
key to highlight the Send DTMF
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
2. If necessary, press the
key to highlight the
The tones of the displayed number are sent.
Unmute option.
3. Press the OK soft key.
The other person can hear you again.
48
49
Options During a Call
Options During a Call
Searching for a Number in
Phonebook
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call Waiting menu
option (Menu 7.3) to Activate; see page 112. You
will be notified of an incoming call by a call waiting
tone.
You can search for a number in Phonebook during a
call.
1. Press the Options soft key.
2. Press the
option.
key to highlight the Phonebook
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
3. Press the OK soft key.
The first call is automatically put on hold.
The Phonebook entries are listed.
2. To switch between the two calls, press the Swap
4. Enter the name that you wish to find.
soft key.
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the
first entry matching your input.
3. To end the call on hold, press the Options soft
key and select the End Held Call option.
To end the current call, press the
key.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phonebook feature,
see page 31.
Making a Multi-party Call
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call. For further details,
contact your service provider.
Using the Message Service
When you receive an SMS (Short Message Service)
message during a call, the Message icon (
flashes on the display. The SMS Service option
enables you to use this feature.
)
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
For further details about the Message feature, see
page 61.
50
51
Options During a Call
Options During a Call
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the OK soft key.
Dropping One Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
4. To add a new person to the multi-party call, call
the person in the normal way and press the
Options soft key. Select the Join option and
press the OK soft key.
The list of call participants appears.
2. Select a person from the list by pressing the
or
key and press the Select soft key or the
key.
You can add incoming callers by answering the call,
pressing the Options soft key, and selecting the
Join option. Repeat as required.
3. Select Remove by pressing the
key and
press the OK soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
Having a Private Conversation With One
Participant
4. End the multi-party call by closing the folder or
1. Press the Options soft key and choose the
pressing the
key.
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person by pressing the
or
key, and press the Select soft key or the
key.
3. When the Private option highlights, press the
OK soft key.
Now you can talk privately with that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the OK soft key.
All the multi-party call participants can now hear
each other.
52
53
Using the Menus
Using the Menus
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
Accessing a Menu Function by Using
its Shortcut
The menu items, such as menu, sub-menus and
options, are numbered and can be accessed quickly
by using their shortcut numbers. The shortcut
number is shown at the bottom right next to the
soft key on the display. Simply press the Menu soft
key and enter the required number.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
Accessing a Menu Function by Scrolling
Note: The numbers assigned to each menu option are
indicated on the list on page 56. They may not
match the menu number on the phone,
depending on the services supported by your
SIM card.
1. In Idle Mode, press the Menu soft key to access
Menu Mode.
2. Scroll with the
or
key to reach a main
menu, such as Phone Settings. Press the
Select soft key or the key to enter the menu.
Example: Accessing the Language option.
1. Press the Menu soft key.
3. If the menu contains any sub-menus, such as
Language, you can access them by scrolling
2. Press the 5 key for Phone Settings.
with the
or
key and pressing the Select
soft key or the key.
3. Press the 4 key for Language.
If the menu that you have selected contains
further options, repeat this step.
The languages available display.
4. To
Press the
List of Menu Functions
scroll through the
menus
or
key or use
and keys on
the
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
the left side of the
phone.
confirm the chosen
setting
Select soft key or the
key.
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu displays
when you press the Menu soft key to enter
Menu Mode. For further details, refer to your
SIM card instructions.
return to the previous
menu level
soft key or the
key.
exit the menu without
changing the settings
key.
54
55
Using the Menus
Using the Menus
1. Text Messages (see page 61)
3. Call Records (see page 81)
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 Setting 1*
1.5.2 Setting 2
1.5.3 Common Setting
1.6 My Objects
3.1 Missed Calls
3.2 Received Calls
3.3 Dialled Calls
3.4 Delete All
3.4.1 Missed Calls
3.4.2 Received Calls
3.4.3 Dialled Calls
3.5 Call Time
3.5.1 Last Call Time
3.5.2 Total Sent
3.5.3 Total Received
3.5.4 Reset Timers
3.6 Call Cost*
*
1.6.1 My EMS Melody
1.6.2 My EMS Picture
1.6.3 My EMS Animation
1.6.4 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
1.7.4 Delete All
3.6.1 Last Call Cost
3.6.2 Total Cost
3.6.3 Max Cost
3.6.4 Reset Counters
3.6.5 Set Max Cost
3.6.6 Price/Unit
1.8 Voice Mail
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
1.9 Broadcast
4. Sound Settings (see page 84)
4.1 Ring Tone
4.2 Ring Volume
4.3 Alert Type
4.4 Keypad Tone
4.5 Message Tone
4.5.1 SMS Tone
4.5.2 SMS-CB Tone
4.6 Folder Tone
4.7 Power On/Off
4.8 Extra Tones
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
2. Picture Messages (see page 73)
2.1 Inbox
2.2 Outbox
2.3 Write New
2.4 Delete All
2.4.1 Inbox
2.4.2 Outbox
2.5 Setup
2.6 MMS Profile
* Shown only if supported by your SIM card.
* Shown only if supported by your SIM card.
56
57
Using the Menus
Using the Menus
5. Phone Settings (see page 89)
6. Organiser (continued)
5.1 My Settings
5.1.1 Wallpaper
5.1.2 Menu Style
5.2 Greeting Message
5.3 Own Number
5.4 Language
6.4 Alarm
6.4.1 Once Alarm
6.4.2 Daily Alarm
6.4.3 Morning Call
6.4.4 Remove Alarm
6.4.5 Autopower
6.5 Calculator
5.5 Security
5.5.1 PIN Check
5.5.2 Change PIN
5.5.3 Phone Lock
5.5.4 Change Password
5.5.5 SIM Lock
6.6 Currency Exchange
7. Network Services (see page 108)
7.1 Call Diverting
5.5.6 FDN Mode*
5.5.7 Change PIN2*
5.6 Display Settings
5.6.1 Contrast
7.1.1 Divert Always
7.1.2 Busy
7.1.3 No Reply
7.1.4 Unreachable
7.1.5 Cancel All
5.6.2 Back Light
5.6.3 Auto Light
5.6.4 Service Light
5.6.5 Graphic Logo
5.7 Extra Settings
5.8 Short Cut
5.8.1 Key Up
5.8.2 Key Down
5.9 Reset Settings
7.2 Call Barring
7.2.1 All Outgoing
7.2.2 International
7.2.3 International Except to Home
7.2.4 All Incoming
7.2.5 Incoming While Abroad
7.2.6 Cancel All
7.2.7 Change Barring Password
7.3 Call Waiting
7.4 Network Selection
7.5 Caller ID
7.6 Closed User Group
7.6.1 Index List
6. Organiser (see page 98)
6.1 Calendar
6.2 To Do List
6.3 Time & Date
6.3.1 Set Time
6.3.2 Set Date
6.3.3 World Time
6.3.4 Time Format
7.6.2 Outside Access
7.6.3 Default Group
7.6.4 Deactivate*
*Shown only if the Closed User Group Feature is active.
* Shown only if supported by your SIM card.
58
59
Using the Menus
Text Messages
8. Funbox (see page 117)
Short message service (SMS) allows you to send
and receive short text message to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make short messages
including simple pictures, melodies, animations.
You must subscribe to the message service of your
service provider.
8.1 Games
8.1.1 HoneyBall
8.1.2 HamsterBox
8.1.3 Bowling
8.2 WAP Browser
8.2.1 Home
8.2.2 Favorite
8.2.3 http://
8.2.4 Settings
8.2.5 Clear Cache
8.2.6 Push Message
8.3 Downloads
8.3.1 Games & More
8.3.2 Sounds
When the Message icon (
) appears, you have
received new text messages. If the memory is full,
an error message displays and you cannot receive
new messages. Use the Delete option in each
message box to delete obsolete ones.
8.3.3 Pictures
8.3.4 DNS Setting
Inbox (Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the message, press the
key.
or
3. To scroll to the previous or next messages, press
the or key.
60
61
Text Messages
Text Messages
While reading a message, you can use the following
options by pressing the Options soft key:
Outbox (Menu 1.2)
This message box is used to store the messages
that you have already sent or will send.
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further details about how to send a message, see
page 64.
When you enter this menu, the list of messages in
the box displays with the recipients’ phone numbers
or names, if available in your Phonebook.
Reply: allows you to reply to the sender by sending
a text message.
1. Select a message from the list and press the
View soft key to read the message contents.
Call Back: allows you to call the sender back.
2. To scroll through the message, press the
key.
or
Cut Address: allows you to extract the destination
number and URL/e-mail addresses or phone
numbers from the message text, so that you can
save them in your phone’s memory.
3. To scroll to the previous or next messages, press
the or key.
While reading a message, you can use the following
options by pressing the Options soft key:
Move: allows you to move the message to another
memory location, from the SIM card to the phone’s
memory or vice versa.
Delete: allows you to delete the message.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the items when writing a
message. For details, see page 65.
Send: allows you to resend the message. For
further details about how to send a message, see
page 64.
Cut Address: allows you to extract the destination
number and URL/e-mail addresses or phone
numbers from the message text, so that you can
save them in your phone’s memory.
Move: allows you to move the message to another
memory location, from the SIM card memory to the
phone memory or vice versa.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone’s memory. You can use the items when
writing a message. For details, see page 65.
62
63
Text Messages
Text Messages
4. If you select a save option, choose the memory
where the message is saved and press the OK
soft key.
Write New (Menu 1.3)
In this menu option, you can write and send a text
message.
5. Enter a destination number and press the OK
Note: When you add media items to the message, the
soft key. The message is sent.
number of characters you can enter decreases.
Note: If the phone fails to send the message, it will
ask you if you want to retry. Press the OK soft
key to confirm. Otherwise, press the Exit soft
key.
Creating a Simple Text Message
1. Create your message.
Note: For further details about entering
Creating a Message Using the Options
1. Create a message.
characters, see page 41.
2. When you finish entering the message, press
the Options soft key. The following options are
available:
2. Press the Options soft key.
• Send: allows you to send the message. The
3. Select one of the following options as required
message is deleted after sending.
by using the
and
keys and pressing the
Select soft key.
• Save and Send: allows you to save a copy of
the message into the specified memory and
then send the message. You can read the
message in your Outbox.
• Text Formatting: allows you to format the
style of the text. For the Size attribute,
Normal, Large and Small sizes are available.
For the Underline and Strikethrough
attributes, select On or Off. The attributes can
be combined.
• Save: allows you to save the message into the
specified memory so that it can be sent later.
You can read the message in your Outbox.
• Add Objects: allows you to add a sound,
melody, picture or animation to your message.
Select the category of the object to be added;
Sound, Melody, Picture and Animation are
available. In each category, you can select
various factory-set items or choose an item
received from other sources, such as the
Internet or other phones.
• For more information about the Text
Formatting, Add Objects, Add Templates,
Add Phonebook, Add Bookmark and
Language options, see page 65.
3. Select Send or Save and Send, and press the
Select soft key.
If you want to just save the message, select
Save. After saving the message, the phone
returns to the Text Messages menu.
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu option (Menu 1.4); for
further details, see page 66.
64
65
Text Messages
Text Messages
• Add Phonebook: allows you to add a
Phonebook entry in your message. Select one
from the list.
Settings (Menu 1.5)
In this menu option, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
• Add Bookmark: allows you to add a web
page’s address stored in your Favorite list
(Menu 8.2.2). Select one from the list.
• Language: allows you to change the language
to be used in the T9 input mode. Select the
language to be used.
Note: The last setting you accessed is automatically
activated for sending messages.
4. Complete the message, and send or save it by
following the procedure from Step 2 on page 64.
Setting x (where x is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your message centre, which is required
when sending messages. You must obtain this
number from your service provider.
Templates (Menu 1.4)
Using this menu option, you can preset up to five
messages that you use most frequently.
Default Destination: allows you to store the default
destination number. The number automatically
displays on the Destination screen when you create
a message.
Scroll through the template list using the
and
keys. When the message template you want
highlights, press the Options soft key.
Default Type: allows you to set the default message
type to Text, Fax, Email or Paging. The network
can convert the messages into the selected format.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Default Validity: allows you to set the length of time
your text messages are stored at the message
centre while attempts are made to deliver them.
Note: For further details about how to enter
characters, see page 41.
Setting Name: allows you to give a name to the
setting group currently being defined.
Send Message: allows you to retrieve the selected
message. Once you have completed the message,
you can send, save and send, or simply save it. For
further details about how to send a message, see
page 64.
Common Setting: The following options are
available:
Reply Path: allows the recipient of your message to
send you a reply via your message centre, if your
network supports this service.
Delete: allows you to delete the selected message.
You are asked to confirm the deletion by pressing
the Yes soft key.
66
67
Text Messages
Text Messages
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether your
message has been delivered or not.
Memory Status (Menu 1.7)
This menu option shows how many messages are
currently stored in the SIM, phone and CB (Cell
Broadcast) memories.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your network.
You can also delete all of the messages in each
message box using the Delete All option (Menu
1.7.4).
My Objects (Menu 1.6)
To
Press the
In this menu option, you can see the objects you
saved from the messages into your phone’s
memory using Select Objects option.
select a message
box to empty
or
key. To delete all
of your messages, select All
Messages.
Three categories of objects are available:
place a check mark Mark soft key.
• My EMS Melody
• My EMS Picture
• My EMS Animation
remove the check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
To delete an item, press the Delete soft key while
viewing it.
When a confirming message displays, press the Yes
soft key to confirm.
You can delete all of the items using the Delete All
option (Menu 1.6.4).
To
Press the
select a category to
clear
or
key. To delete
all of your objects, select
All Object.
place a check mark
on the category
Mark soft key.
remove the check
mark
Unmark soft key.
Delete soft key.
delete the marked
objects
When a confirming message displays, press the Yes
soft key to confirm.
68
69
Text Messages
Text Messages
Voice Mail (Menu 1.8)
Broadcast (Menu 1.9)
This menu option provides you with a way of
accessing your voice mailbox, if your network
supports this service.
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Cell broadcast messages display as soon as
they are received, provided that:
The following options are available:
• the phone is in Idle Mode.
Connect to Voice Server: before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
option 1.8.2). You can then select this option and
simply press the OK soft key to listen to your
messages.
• the Receive option is set to Enable.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received message. The
Volatile box displays the messages from the
network, but loses its contents as soon as the
phone is switched off. Scroll through the message
To quickly connect to the voice server, press and
hold down the 1 key in Idle Mode.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
by using the
and
keys.
While reading a message, press the Save soft key
to store the message in the Archive box for later
retrieval.
To
Press the
enter the server
number
corresponding numeric
keys.
Receive: allows you to enable or disable the
reception of broadcast messages.
correct a digit
C key.
move the cursor
to the left/right
without clearing
the digit
or key.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them respectively. A
check mark displays in front of each selected
channel.
Note: Voice Mail is a network feature. Please contact
your service provider for further details.
Add Channel: use to enter the ID and title for a new
channel.
70
71
Text Messages
Picture Messages
Delete: use to remove a channel from the list.
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
Edit: use to change the ID and title of an existing
channel.
Language: allows you to select your preferred
language to display cell broadcast messages.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Please contact your service provider for more
information.
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages, which are short messages that contain
images, such as your photos or graphics you
downloaded from the Internet. This function is
available only if it is supported by your service
provider. Only phones that offer picture message
features can receive and display picture messages.
Inbox (Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows the text notification along with the
sender’s number.
1. Press the Select soft key to view the message.
The display shows brief information about the
message, such as the sender’s number, the
message size and the subject.
If you want to view the message later in the
Inbox, press the Exit soft key.
72
73
Picture Messages
Picture Messages
2. To scroll through the message, press the
key.
or
Cut Address: allows you to extract the sender’s
number or address from the message, so that you
can dial it or save it in Phonebook.
While viewing a message, press the Options soft
key to use the following options:
Forward: allows you to forward the message to
another person.
Retrieve: shows you the message contents.
Save Picture: allows you to save an image from
the message into your phone. Images are in the
Pictures folder in the Downloads menu (Menu
8.3)
Delete: deletes the message.
More Information: shows you detailed
information about the message.
Save Sound: allows you to save a sound from the
message into the Sounds folder in the Downloads
menu (Menu 8.3).
Viewing a Received Message in the Inbox
When you access the Inbox menu option (Menu
2.1), the list of multimedia messages you received
displays with the senders’ phone numbers, if they
are available in your Phonebook, or subjects.
Information: shows you information about the
message, such as subject, sender’s address, or
message size.
1. Select the message and press the Select soft
key to view the message.
Outbox (Menu 2.2)
2. To scroll through the message, press the
key.
or
When you access this menu option, the list of the
picture messages you saved displays.
While viewing a message, you can choose the
Message options by pressing the Options soft key.
1. Select the required message and press the
Select soft key to view the message contents.
If you are viewing a new message, the options are
the same as when you view a message as soon as
you receive it. See the previous section.
2. To scroll through the message, press the
key.
or
When you are reviewing a message, the following
options are available:
While viewing a message, you can use the following
options by pressing the Options soft key:
Delete: deletes the message.
Delete: deletes the message.
Reply: allows you to reply to the sender by sending
a text or picture message.
Cut Address: allows you to extract the destination
numbers or addresses from the message, so that
you can dial a number or save one of them in
Phonebook.
Call Back: allows you to call the sender back.
74
75
Picture Messages
Picture Messages
Send: allows you to resend the message.
4. Repeat steps 2 and 3 until you finish creating
your message.
Edit Message: allows you to change the message
contents, picture or text.
5. If you want to change the added items, press
the
or
key to highlight one and press
the Options soft key.
Write New (Menu 2.3)
The following options are available:
• Edit: allows you to change text or replace the
image with another.
This menu option allows you to create a new picture
message and then send it to multiple destinations.
• Delete: deletes the item from your message.
• Send: allows you to send the message.
Creating and Sending a Picture Message
• Save: saves the message in your Outbox
(Menu 2.2) for later use.
1. Enter the subject of your message and press the
OK soft key.
6. When you finish creating the message, select
For further details about entering characters,
see page 41.
Send from the options.
7. Choose one of the following options and press
2. Press the Options soft key and add the
message contents using one of the following
options:
the Select soft key:
• Phone Number: allows you to enter the
desired phone number.
• Add Text: Enter the message text and press
the OK soft key.
• E-Mail: allows you to enter the e-mail address
of the recipient to send the message as an e-
mail.
• Add Picture: allows you to add a picture
stored in the Pictures folder in the
Downloads menu (Menu 8.3). Choose a
picture and press the Select soft key.
• Phone Book: allows you to recall a phone
number or e-mail address from your
Phonebook.
• Send: allows you to send the message. Use
this option when you finish creating the
message.
8. Enter a number or an address, or select an entry
from Phonebook.
• Save: saves the message in your Outbox
(Menu 2.2) for later use. Use this option
when you finish creating the message.
9. When the correct number or address displays,
press the OK soft key.
10.If you want to send the message to multiple
destinations, select Add Destination and press
the Select soft key.
3. When the added content displays, press the
key to highlight Add Here.
76
77
Picture Messages
Picture Messages
11.Repeat steps 7 to 10, as needed. You can enter
up to 10 destinations.
Read Reply: When this option is checked, your
phone sends a request for a reply along with your
message to the recipient
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
Auto Download: When this option is checked,
your phone automatically downloads the received
pictures or sounds.
12.After entering the destinations, press the Select
soft key when Send Message highlights.
Your phone sends the message.
MMS Profile (Menu 2.6)
In this menu option, you can configure various
settings that are required when you send or receive
picture messages.
Delete All (Menu 2.4)
You can delete all of the messages in Inbox or
Outbox.
Notes
:
• The last profile you accessed is activated for sending
messages.
• In most cases, you don’t need to change these
settings. If you change them without the service
provider’s instructions, the MMS feature may not
work properly.
When a confirming message appears, press the Yes
soft key to confirm.
Setup (Menu 2.5)
For each profile, the following options are available:
You can change the default settings for sending or
receiving picture messages.
Profile Name: enter the name that you wish to
assign to the MMS server.
To place or remove a check mark on an option,
press the Select soft key.
Connection URL: enter the URL address of your
MMS server.
The following options are available:
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
Hide ID: When this option is checked, your phone
number does not display on the recipient’s phone.
IP Address: enter the gateway address required to
connect to the MMS server.
Delivery Report: When this option is checked, the
network informs you whether or not your message
has been delivered.
User Name: enter the user ID required to connect
to the MMS server.
78
79
Picture Messages
Call Records
Password: enter the password required to connect
to the MMS server.
In this menu, you can view the:
• calls you missed, received or dialled.
• length of your calls.
APN: enter the access point name used for the
address of the MMS server.
• cost of your calls.
For further details, contact your service provider.
Note: You can access the numbers in the three types
of call records by pressing the
Mode.
key in Idle
Missed Calls (Menu 3.1)
This menu option lets you view the last 20 numbers
of the calls you received, but did not answer.
The number and name, if available, display
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
• delete the call from the list.
• edit the number, if available, and dial it or save it
in Phonebook.
Received Calls (Menu 3.2)
This menu option lets you view the last 20 numbers
of the calls you received.
The number and name, if available, display
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
• delete the call from the list.
• edit the number, if available, and dial it or save it
in Phonebook.
80
81
Call Records
Call Records
Total Received: total length of all calls received
since the timer was last reset.
Dialled Calls (Menu 3.3)
This menu option lets you view the last 20 numbers
you dialled.
Reset Timers: option used to reset the call timers.
You must first enter the phone password (see
page 130) and then press the OK soft key.
The number and name, if available, display
together with the date and time when the call was
made. By pressing the Options soft key, you can:
Call Cost (Menu 3.6)
• delete the number.
• edit the number and dial it or save it in
Phonebook.
This network feature lets you view the cost of calls.
This option is shown only when it is supported by
your SIM card.
The following options are available:
Delete All (Menu 3.4)
Last Call Cost: cost of the last call made.
You can delete all of the numbers stored in each call
record.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set in the Set Max Cost option,
you can no longer make any calls until you reset the
counter.
When a confirming message appears, press the Yes
soft key to confirm.
Max Cost: maximum cost set in the Set Max Cost
option. See below.
Call Time (Menu 3.5)
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 132) and then press the OK soft key.
This menu option lets you view the timers for calls
made and received.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and others.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls.You must first
enter your PIN2 (see page 132) and then press the
OK soft key.
The following timers are available:
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 132) and then press the OK soft key.
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
82
83
Sound Settings
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
Alert Type (Menu 4.3)
This menu option allows you to specify how you are
to be informed of any incoming calls.
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on/off.
The following options are available:
Light Only: only the service light flashes; the
phone neither rings nor vibrates.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu option
(Menu 4.1); see page 84.
Note: When the phone is in the silent mode (see
page 28), you cannot change the sound
settings.
Vibration: the phone vibrates but does not ring.
Vibra + Melody: the phone just vibrates and then
saved.
Ring Tone (Menu 4.1)
Keypad Tone (Menu 4.4)
This menu option allows you to select a ring
melody.
This menu option allows you to select a tone that
the phone sounds when you press a key.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded any sounds from
the Internet or optional EasyGPRS programme, you
can view them in this menu.
You can choose from Cool, Piano, Tone and Beep.
To turn the sound off, select Off.
Ring Volume (Menu 4.2)
This menu option allows you to adjust the ring
volume to one of five levels.
Use the
and
keys or the volume keys on
the left side of the phone to increase or decrease
the volume.
84
85
Sound Settings
Sound Settings
Message Tone (Menu 4.5)
Folder Tone (Menu 4.6)
This menu option allows you to select how the
phone informs you that a new message has been
received.
This menu option allows you to select a melody that
the phone sounds when you open or close the
folder.
You can choose either Future or Crystal. To turn
the sound off, select Off.
SMS Tone (Menu 4.5.1)
This menu option allows you to select how the
phone informs you that a new SMS message has
been received.
Power On/Off (Menu 4.7)
The following options are available:
Off: the phone does not use the SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
This menu option allows you to select a melody that
the phone sounds when it is switched on and off.
You can choose either Classical or Cheerful. To
turn the sound off, select Off.
Single Beep: the phone beeps once.
Extra Tones (Menu 4.8)
SMS Tone x: the phone uses one of several SMS
tones.
You can customise various other tones for your
phone.
SMS-CB Tone (Menu 4.5.2)
To turn a given
tone
Press the
This menu option allows you to select how the
phone informs you that a new cell broadcast (CB)
message has been received.
on
ON soft key.
A check mark displays in
front of the option.
The following options are available:
Off: the phone does not use the CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
off
OFF soft key.
The check mark no longer
displays.
Single Beep: the phone beeps once.
SMS-CB Tone x: the phone uses one of several CB
tones.
86
87
Sound Settings
Phone Settings
The following options are available:
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
Error Tone: sets whether or not the phone informs
you that you make a mistake.
Minute Minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
My Settings (Menu 5.1)
Connect Tone: sets your phone to beep when your
call is connected to the system.
You can change the background image of Idle Mode
and the display style of Menu Mode according to
your preference.
Wallpaper (Menu 5.1.1)
This menu option allows you to change the
background image to be displayed on the idle
screen.
To change the background image:
1. Scroll through the list by pressing the
key.
or
2. Press the Select soft key when the image you
want highlights.
The selected image displays.
3. After viewing the image, press the Select soft
key to display it on the idle screen.
The display asks if you want to display text on
the screen.
4. Press the Yes soft key to display the current
date and time on the wallpaper image.
To display only the image, press the No soft key.
88
89
Phone Settings
Phone Settings
Menu Style (Menu 5.1.2)
Language (Menu 5.4)
This menu option allows you to select the menu
display style. You can choose either Folder Style or
Page Style.
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Greeting Message (Menu 5.2)
This menu option allows you to set a greeting to be
displayed briefly when the phone is switched on.
Security (Menu 5.5)
The Security feature enables you to restrict the use
of your phone to the people and the types of calls of
your choice.
To
Press the
clear the existing
message
C key and hold it down until
the message is cleared.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. See also pages 130-133.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
soft key.
PIN Check (Menu 5.5.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
For further details about how to enter characters,
see page 41.
Note: Before disabling the PIN Check feature, you
Own Number (Menu 5.3)
must enter your PIN.
This feature allows you to:
To change your PIN, refer to the Change PIN menu
option (Menu 5.5.2).
• assign a name to each of your own phone
numbers registered on your SIM card.
The following options are available:
• edit the names and numbers.
Disable: the phone connects directly to the
This function is a memory aid, which you can use to
check your own phone numbers if you need to do.
network when you switch it on.
Enable: you must enter the PIN each time the
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
phone is switched on.
90
91
Phone Settings
Phone Settings
Change PIN (Menu 5.5.2)
SIM Lock (Menu 5.5.5)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
When the SIM Lock feature is enabled, your phone
only works with the current SIM card. You must
enter the SIM lock code.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
Phone Lock (Menu 5.5.3)
FDN Mode (Menu 5.5.6)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change Password menu option (Menu 5.5.4).
The following options are available:
Disable: you can call any number.
Once the correct password has been entered, you
can use the phone until you switch it off.
Enable: you can only call phone numbers stored in
the Phonebook. You must enter your PIN2.
The following options are available:
Note: Not all SIM cards have a PIN2. If your SIM card
Disable: you are not asked to enter the phone
password when you switch the phone on.
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option (Menu 5.5.7)
Enable: you are required to enter the phone
password when you switch the phone on.
Change PIN2 (Menu 5.5.7)
Change Password (Menu 5.5.4)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
92
93
Phone Settings
Phone Settings
Display Settings (Menu 5.6)
Contrast (Menu 5.6.1)
Enable: the backlight is used only during the
specified period of time. Enter the time when the
phone turns the light on and then turn it off, using
the appropriate number keys.
This menu option allows you to adjust the contrast
of the display screens to see them better in
different light conditions.
Service Light (Menu 5.6.4)
This menu option allows you to select whether or
not the service light on the folder is used or in
which colour it flashes.
Adjust the contrast by using the
or the volume keys on the left side of the phone.
and
keys
When you are satisfied, press the OK soft key to
Select one from various colour settings. When the
phone is ready for use, the service light flashes in
the appropriate colour.
save the selection.
Back Light (Menu 5.6.2)
If you do not wish to use the service light,
select Off.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
Graphic Logo (Menu 5.6.5)
Select the length of time the backlight is on. The
backlight turns on when you press a key or receive
a call or message and turns off after the specified
length of time.
This menu option allows you to display your
operator’s logo instead of its name.
Off: the operator name displays in Idle Mode.
If you do not want to use the backlight, select Off.
On: the operator logo stored in your phone displays
in Idle Mode. When no logo has been stored, the
operator name displays.
Auto Light (Menu 5.6.3)
Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
conserve your battery power.
The following options are available:
Disable: the backlight is used according to the
setting in the Back Light menu option
(Menu 5.6.2); see page 94.
94
95
Phone Settings
Phone Settings
Extra Settings (Menu 5.7)
Short Cut (Menu 5.8)
You can turn the automatic redialling or answering
features on or off.
The navigation keys can be used as shortcut keys.
In Idle Mode, they allow you to access specific
menu options directly.
To turn a feature Press the
To assign a shortcut to a key:
on
ON soft key.
A check mark displays in
front of the option.
1. Select the key to be used as a shortcut key by
pressing the
or
key and press the
Select soft key.
off
OFF soft key.
The check mark no longer
displays.
• Key Up (
)
• Key Down (
)
2. Select the menu option to be assigned to the
key by pressing the or key.
The following options are available:
Note: To deactivate a shortcut key, select the
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
None option.
3. Press the Select soft key to save the selection.
Note: The interval between two call attempts varies.
Active Folder: when this option is checked, you
can simply open the folder to answer a call.
Reset Settings (Menu 5.9)
When it is unchecked, you must open the folder and
press a key, depending on the setting of the
Anykey Answer option. See below.
You can easily reset your phone to its default
settings. To reset your phone:
1. Select the Reset Settings menu option.
Anykey Answer: when this option is checked, you
can answer an incoming call by pressing any key,
2. Enter the phone password and press the OK soft
except the
key and the Reject soft key. To
key.
reject the call, press the
soft key.
key or the Reject
Note: The password is preset to “00000000”. To
change this password, see page 92.
When this option is unchecked, you can only press
the key or Accept soft key.
96
97
Organiser
Organiser
The Organiser feature enables you to:
Writing a Memo
• view the calendar and organise your schedule.
• define a list of things to do.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the
navigation keys.
• set the current date and time.
• set an alarm so that the phone rings at a specific
time, such as to remind you of an appointment.
Note: To skip to the previous or next month, press
the volume keys on the left side of the
phone.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
2. Press the Select soft key.
An empty memo screen displays to allow you to
enter your memo.
Calendar (Menu 6.1)
3. Enter your memo and then press the OK soft
With the Calendar feature, you can
• consult the calendar.
key.
Note: For further details about how to enter
• write memos to keep track of your schedule.
• trigger an alarm, if necessary.
characters, see page 41.
You are asked if you wish to set an alarm.
4. If you want an alarm to ring on the chosen day,
Consulting the Calendar
press the Yes soft key.
When you select the Calendar menu option (Menu
6.1), the calendar displays. The following options
are available when you press the Options soft key:
Otherwise, press the No soft key. The memo is
saved.
5. If you pressed the Yes soft key, set the time for
Search All: displays all of the memos, starting with
the oldest, regardless of the day. To scroll through
the alarm and press the OK soft key.
the memos, press the
or
key.
You can set a melody for the alarm by pressing
the Melody soft key.
Delete All: allows you to delete all of the memos.
You are asked to confirm your action.
The colour of the date is changed to green to
indicate that a memo exists.
Go to Date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to Idle
Mode.
98
99
Organiser
Organiser
To Do List (Menu 6.2)
Editing a Memo
This feature allows you to:
When you select a day for which a memo already
exists, you can press the Edit soft key to edit the
memo displayed.
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Note: For further details about how to enter
characters, see page 41.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Once you have finished editing the memo, press the
OK soft key.
The following options are available when you press
the Options soft key:
Note: For further details about how to enter
characters, see page 41.
Alarm: allows you to set an alarm to ring at the
specified time to inform you of the memo. If you
already set, you can change or delete the alarm.
3. Press the OK soft key.
4. Select high, normal or low priority using the
Erase: allows you to delete the memo.
and
keys and press the Select soft key.
Copy to: allows you to copy the memo to another
date and/or time.
5. Enter your deadline.
Move to: allows you to change the date and/or
If you do not want to set a deadline, press the
time of the memo.
Skip soft key.
6. Press the OK soft key.
Editing the To Do List
When you select the To Do List menu option
(Menu 6.2), the current contents display with the
status mark and priority;
normal and for low.
for high,
for
100
101
Organiser
Organiser
The following options are available:
To view the
details for a
specific task
➀ highlight the task.
➁ press the View soft key.
➂ scroll through the tasks
To copy a task
➀ highlight the task.
➁ press the Options soft key.
➂ select the Copy option.
➃ change the text, priority
and/or deadline for the
task, as required.
using the
and
keys,
if necessary.
To change the
status of a
specific task
➀ highlight the task.
➁ press the key to mark
the task as completed as of
the current date and time.
To copy a task to ➀ highlight the task.
the calendar
➁ press the Options soft key.
➂ select the Copy to
Calendar option.
➃ change the text and
deadline for the task and/or
set the alarm, as required.
or
➀ highlight the task.
➁ press the Options soft key.
➂ select the Mark option.
➃ select the appropriate status
(Done or Undo).
To delete a task
➀ highlight the task.
➁ press the Options soft key.
➂ select the Delete option.
To create a new
task
➀ press the Options soft key.
➁ select the New option.
➂ enter the text, priority and
deadline for the task.
To delete all tasks ➀ press the Options soft key.
➁ select the Delete All
option.
➂ confirm the deletion by
pressing the OK soft key.
To edit an
existing task
➀ highlight the task.
➁ press the Options soft key.
➂ select the Edit option.
➃ change the text, priority
and/or deadline for the
task, as required.
To exit the To Do ➀ press the Options soft key.
list
➁ select the Exit option.
To sort the
➀ press the Options soft key.
existing tasks by ➁ select the Sort option.
priority or status
➂ select the sort criterion
(High, Low, Done or
Undo).
102
103
Organiser
Organiser
Time & Date (Menu 6.3)
Alarm (Menu 6.4)
This menu option allows you to change the current
time and date displayed. You can also use this
option to find out what time it is in another part of
the world.
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off
(Autopower menu option set to Enable).
The following options are available:
Set Time: allows you to enter the current time. You
can choose the time format in the Time Format
menu option (Menu 6.3.4). See below.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Note: Before setting the time, you must specify your
Daily Alarm: the alarm rings every day at the
same time.
time zone in the World Time menu option
(Menu 6.3.3).
Morning Call: the alarm rings to wake you up in
the morning.
Set Date: allows you to enter the day, month and
year.
To set an alarm:
World Time: allows you to find out what time it is
in another part of the world, using the and
keys.
1. Choose the type of alarm to be set.
2. Enter the time using the numeric keys.
The screen shows the:
• city name.
If you want to use the alarm options, press the
Options soft key. The following options are
available:
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default).
• Remove Alarm: deactivates the current
alarm.
• Alarm Sound Set: allows you to select the
alarm melody.
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the or key one or more times.
The local date and time display.
3. Press the OK soft key.
4. When you selected Morning Call in Step 1,
choose the repeat option, either Monday to
Friday or Monday to Saturday, and press the
Select soft key.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
104
105
Organiser
Organiser
Currency Exchange (Menu 6.6)
To stop the alarm when it rings, open the folder and
press the Exit soft key.
Using this menu option, you can make currency
conversions.
Remove Alarm: deactivates all alarm settings.
1. Enter the current exchange rate of your source
Autopower: When this option is set to Enable, the
alarm rings at the specified time, even if the phone
is switched off.
currency and press the OK soft key.
You can insert a decimal point by pressing
the
key.
When the menu option is set to Disable and the
phone is switched off at the specified time, the
alarm does not ring.
2. Enter the amount to convert and press the OK
soft key.
The exchange rate and local currency amount
you entered and the equivalent value in the
foreign currency display.
Calculator (Menu 6.5)
3. Press the Exit soft key to exit the currency
With this feature, you can use the phone as a
calculator. The calculator provides basic arithmetic
functions; addition, subtraction, multiplication and
division.
convertor.
1. Enter the first number using the numeric keys.
Notes
• To erase mistakes or clear the display, press the
key.
:
C
• To include a decimal point or a bracket, press the
left soft key until the symbol you want to use
displays.
2. Press the right soft key until the required
arithmetic symbol appears: + (addition),
- (subtraction),
(multiplication), / (division).
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
106
107
Network Services
Network Services
To set your call diverting options:
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
1. Select the type of call diverting by pressing the
or key and then press the Select soft
key.
2. Select the type of calls to be diverted by
pressing the
Select soft key.
or
key and then press the
Call Diverting (Menu 7.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
3. To
Press the
Call diverting can be set up in the following ways:
activate call diverting Activate soft key.
Divert Always: all calls are diverted.
Go to Step 4.
Busy: calls are diverted when you are already on
another call.
change the call
number
Change soft key.
Go to Step 4.
No Reply: calls are diverted when you do not
answer the phone.
deactivate call
diverting
Remove soft key.
Unreachable: calls are diverted when you are not
in an area covered by your service provider.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
To enter an international code, press the 0 key
until the + sign displays.
Cancel All: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
The phone sends your settings to the network
and the network’s acknowledgement displays.
• Voice calls only
• Data calls only
You can deactivate all of the call diverting settings
by selecting the Cancel All option.
108
109
Network Services
Network Services
3. Press the Activate soft key to confirm your
Call Barring (Menu 7.2)
settings.
The call barring network service allows you to
restrict your calls.
4. Enter your call barring password supplied by
your service provider.
Call barring can be set up in the following ways:
All Outgoing: calls cannot be made.
The phone sends your settings to the network
and the network’s acknowledgement displays.
International: international calls cannot be made.
To deactivate specific call barring settings:
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
All Incoming: calls cannot be received.
4. Enter your call barring password supplied by
your service provider.
Incoming While Abroad: calls cannot be received
when you are using your phone outside of your
home service area.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
You can also deactivate all of the call barring
settings by selecting the Cancel All option.
You can specify individual barring options for each
of the following call types.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
• Voice calls only
• Data calls only
To set your call barring options:
Once you have entered a new password, you are
asked to confirm it by entering it again.
1. Select the type of call barring by pressing the
or
key and then press the Select soft
key.
2. Select the type of calls to be barred by pressing
the or key and then press the Select
soft key.
110
111
Network Services
Network Services
Call Waiting (Menu 7.3)
Network Selection (Menu 7.4)
This network service informs you when someone is
trying to reach you during another call.
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
You can specify individual call waiting options for
each of the following call types:
Note: You can select a network other than your home
network only if there is a valid roaming
agreement between them.
• Voice calls only
• Data calls only
To indicate to automatically or manually select the
network when roaming:
To set your call waiting options:
1. Select the type of calls to which you want to
apply the call waiting option by pressing the
1. When Network Selection displays, press the
Select soft key.
or
key and then press the Select soft key.
2. Press the
or
key until the appropriate
The screen informs you whether call waiting is
activated or deactivated.
option highlights and then press the OK soft
key.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
To return to the previous screen, press the Exit
soft key.
3. Press the
or
key until the preferred
You can also deactivate all of the call waiting
settings by selecting the Cancel All option.
network highlights and then press the OK soft
key.
You are connected to that network.
112
113
Network Services
Network Services
Caller ID (Menu 7.5)
Activating a Closed User Group
You can prevent your phone number from being
displayed on the phone of the person being called.
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key:
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service
provider or delete a selected group.
Default: the default setting provided by the
network is used.
Hide Number: your number does not display on
the other person’s phone.
To
Press the
scroll through the
existing CUG
indexes
or
key.
Send Number: your number is sent each time you
make a call.
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
Closed User Group (CUG) (Menu 7.6)
delete a CUG
index
Options soft key and select
the Delete option.
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
activate a CUG
index
Options soft key and select
the Activate option.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
114
115
Network Services
Funbox
The Funbox menu contains several fun options.
Outside Access: lets you enable or disable calls to
numbers other than those in the Closed User
Group. This feature depends on the nature of your
CUG subscription. Please check with your service
provider.
Games (Menu 8.1)
You can enjoy the games with your phone.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Scroll to a game, using the
and
keys and
press the Select soft key.
For each game, the following options are available.
To select an option, press the corresponding
number key:
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
New Game: allows you to start a game.
High Score: shows you the High Score table.
Key Info: shows you which keys do what within
the game.
Continue: allows you to continue the last game
you played.
While you are playing a game:
To
Press the
pause or resume the
game
C key.
exit the game
key.
At the end of the game, if your score is ranked fifth
or higher, you may enter a name of up to 10
characters.
116
117
Funbox
Funbox
Navigating the WAP Browser
WAP Browser (Menu 8.2)
To
Press the
Your phone comes equipped with a WAP (Wireless
Application Protocol) Browser which makes it
possible for you to access and navigate the Wireless
Web.
scroll through and
select browser
items
or
key until the
symbol points to the
required item, and then
press the OK soft key to
confirm the selection.
Home (Menu 8.2.1)
select a numbered
item
corresponding numeric key.
Selecting this option connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the
in Idle Mode.
key
return to the
previous page
Back soft key or the C key.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
return to the
startup homepage
key and select the Home
menu option. For further,
refer to page 120.
scroll through the screen, use the
keys.
and
Entering Text in the WAP browser
Note: To access the startup homepage from any other
screen in the WAP Browser, use the Home
option. For further details about the WAP
Browser menus, see page 120.
When you are prompted to enter text, the current
text entry mode is indicated on the screen.
To change
modes
press the
times.
key one or more
Exiting the WAP Browser
To enter a space press the
key.
To exit the browser at any time, simply press
the
key or press and hold the
key.
To edit text
➀ set the cursor to the right of
the character(s) to be
corrected.
➁ press the C key as required.
➂ enter the correct
character(s).
For further details about each text input mode, see
page 41.
118
119
Funbox
Funbox
Using and Selecting Menu Options
To
Press the
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
set the current
page as your
startup homepage
Option soft key, select the
Save to Home option and
press the Select soft key.
To access a menu option:
set a bookmark for Option soft key, select the
1. Press the
key.
the current page
Save to Bookmark option
and press the Select soft
key.
A menu displays.
2. Highlight a menu option by using the
keys.
and
cancel your setting Back soft key.
3. Access an option by pressing the Select soft
key.
Edit Home: allows you to change the startup
homepage manually. Enter the required URL and
press the OK soft key. For further details about
entering text, see page 119.
4. If necessary, select the secondary option using
the
and
keys, and press the Select soft
key to confirm.
Note: The menus may vary, depending on your
Favorite (Menu 8.2.2)
version of the WAP Browser.
This menu option allows you to store the URL
addresses of your favourite Web sites. You can
access this menu directly by pressing and holding
The following options are available:
the
key while using the WAP Browser.
Reload: reloads the current page.
To store a URL address:
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
1. Select an empty location and press the Options
Go to URL: allows you to manually enter the URL
address of the required Web page. After entering an
address, press the OK soft key to go there directly.
soft key.
2. Enter the address and press the Enter soft key.
Show URL: displays the URL address of the site to
which you are currently connected. It also enables
you to set the current site as the startup
homepage.
For further details about entering text, see
page 41.
3. Enter a title for the favourite item and press the
Enter soft key.
After saving favourite items, you can use the
following items by press the Options soft key:
120
121
Funbox
Funbox
Goto URL: quickly accesses you to the site.
Edit: allows you to edit the address.
Erase: deletes the address.
Bearer: select the bearer to be used for each type
of network address accessed; GPRS or Data. The
remaining options depend on the Bearer setting.
When the bearer is set to GPRS:
User Name: enter the User ID required to connect
to the GPRS network.
http:// (Menu 8.2.3)
This menu option allows you to manually enter a
URL address of the Web site that you wish to
access. You can access this menu directly by
Password: enter the password required to connect
to the GPRS network.
pressing and holding the
WAP Browser.
key while using the
APN: enter the access point name used for the
address of the GPRS network gateway.
For further details about entering text, see page 41.
When the bearer is set to Data:
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Settings (Menu 8.2.4)
You can set up five proxy servers for the WAP
Browser. Contact your service provider for details.
Dial-up Number: enter the PPP server’s dial-up
number.
For each server, the following options are available:
Data Call Type: select a data call type from
Analogue or ISDN.
Profile Name: enter a name that you wish to
assign to the HTTP proxy server.
Note: The WAP Browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Homepage URL: enter the address of your startup
homepage. When the default homepage displays,
you can delete it using the C key and enter your
own choice.
Clear Cache (Menu 8.2.5)
Security: set the data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
You can clear the information stored in the cache,
which is the phone’s temporary memory used to
store the most recently accessed Web pages.
IP Address: enter the WAP gateway address
required to connect to the Internet.
122
123
Funbox
Funbox
2. Scroll to the MIDlet you want and press the
Push Message (Menu 8.2.6)
Launch soft key.
This menu option allows you to receive and access
Web messages from the server.
3. Start the MIDlet using the soft keys.
The following options are available:
Using the Menus
Inbox: allows you to read the messages you
received from the web server.
From the Main Screen, press the Menu soft key to
access the following options:
Receive: allows you to set whether or not the
phone receives Web messages from the server.
Info: displays information about the selected
MIDlet, such as the file size, application version,
vendor, and location of the jad file, which is the
MIDlet description file.
Delete All: deletes all of the messages.
Remove: removes the selected MIDlet. When the
confirmation message appears, press the Remove
soft key. To cancel your selection, press the Cancel
soft key.
Downloads (Menu 8.3)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone. You can view the list of MIDlets stored on
the Games & More screen.
Update: accesses the server and updates the
selected MIDlet.
Entering Text
Note: Java services may be unavailable depending on
For entering text while using a MIDlet, the following
input modes are available:
the service provider.
Games & More (Menu 8.3.1)
Upper-case character (A): allows you to enter
upper-case English characters.
This menu option allows you to launch a MIDlet and
access various menu options.
Lower-case character (a): allows you to enter
lower-case English characters.
For further details about how to download MIDlets
in the WAP Browser, see page 118.
Note: In the upper/lower-case character mode, you
can enter symbols by pressing the 1 or 0 key
Launching a MIDlet
until the symbol you want displays
.
Number (1): allows you to enter numbers.
To launch a MIDlet:
To change the text input mode, press the
until the appropriate indicator appears on the soft
key area of the display.
key
1. From the Downloads screen, select the Games
& More option.
124
125
Funbox
Solving Problems
Sounds (Menu 8.3.2)
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
In this menu, you can view the list of sounds
downloaded from the server. You can set the
downloaded sounds as the current ring tone or send
the sounds to other phones.
When you switch your phone on, the
following messages may appear
When the memory is full, a warning message
displays and the phone rejects additional sounds
until you erase the obsolete ones.
Insert SIM Card
• Check that the SIM card is correctly installed.
Pictures (Menu 8.3.3)
Phone Locked Enter Password
In this menu, you can view the list of pictures
downloaded from the server. You can set the
downloaded pictures as the current background
image or send them to other phones.
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
When the memory is full, a warning message
displays and the phone rejects additional pictures
until you erase the obsolete ones.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
DNS Setting (Menu 8.3.4)
• The PIN Check feature is enabled. Every time the
phone switched on, the PIN has to be entered. To
disable this feature, use the PIN Check menu
option (Menu 5.5.1).
The DNS (Domain Name Server) address of the
Java server is preset at the factory, but sometimes
you may need to change it. In this menu, you can
determine whether the address is automatically
updated or not.
Enter PUK
Automatic: the server automatically transmits the
address to the phone if it is changed.
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
Manual: you can manually change the address.
126
127
Solving Problems
Solving Problems
“No service,” “Network failure” or “Not
done” displays
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• Your battery is insufficiently charged. Recharge
the battery.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
You have entered a number but it was
not dialled
• Try moving the phone slightly or moving closer to
a window if you are in a building.
• Have you pressed the
key?
No number is dialled when you recall a
Phonebook entry
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
Your correspondent cannot reach you
• Re-store the number, if necessary.
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
If the above guidelines do not help you to solve
the problem, take a note of:
Your correspondent cannot hear you
speaking
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
• Have you switched off the microphone?
Then contact your local dealer or Samsung
after-sales service.
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
128
129
Access Codes
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
PIN
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the C key one or more times until
the incorrect digit is cleared and then continue
entering the correct code.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
The access codes, except for the PUK and PUK2
codes can be changed using the Security menu
option (Menu 5.5). See page 91 for further details.
To
See
activate/deactivate the
PIN Check feature
page 91
(Menu 5.5.1).
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not dial an emergency
number accidentally.
change the PIN
page 92
(Menu 5.5.2).
PUK
Phone Password
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
To
See
2. Enter a new PIN of your choice and press the OK
activate/deactivate the
Phone Lock feature
page 92
soft key.
(Menu 5.5.3).
3. When the Confirm New PIN message displays,
enter the same code again and press the OK
soft key.
change the phone
password
page 92
(Menu 5.5.4).
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
130
131
Access Codes
Access Codes
PIN2
Barring Password
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
The 4-digit barring password is required when you
use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function.
You can change this password using the Call
Barring menu option (Menu 7.2). See page 111
for further details.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 93 (Menu 5.5.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
132
133
Health and Safety Information
Health and Safety
Information
Precautions When Using Batteries
Exposure to Radio-Frequency Energy
(SAR Information)
• Never use any charger or battery that is damaged
in any way.
This phone meets Australian Communications
Authority (ACA) requirements (AS/NZS 2772)
concerning exposure to radio waves.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by ACA. These limits
are part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
*
ACA is 1.6W/kg.
* The SAR limit for mobile phones used by the public is 1.6
watts/kilogram (W/kg) averaged over one gram of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account
for any variations in measurements. The SAR values may
vary depending on the national reporting requirements and
the network band.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
134
135
Health and Safety Information
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your phonebook takes your
attention away from your primary responsibility,
driving safely.
136
137
Health and Safety Information
Health and Safety Information
Operating Environment
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives
are in danger, call the emergency number, as
you would want others to do for you.
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
10.Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or any other special non-
emergency wireless number.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
138
139
Health and Safety Information
Health and Safety Information
Vehicles
Persons with pacemakers:
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
Posted Facilities
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Switch off your phone in any facility where posted
notices require you to do so.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
Potentially Explosive Atmospheres
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
140
141
Health and Safety Information
Health and Safety Information
Emergency Calls
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
3. Press the
key.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
142
143
Health and Safety Information
Health and Safety Information
Care and Maintenance
• Use only the supplied or an approved
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
144
145
Glossary
Glossary
Enhanced Message Service (EMS)
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
An adaptation of the Short Message Service (SMS)
that allows users to send and receive ring tones and
operator logos, as well as combinations of simple
media to and from EMS-compliant handsets.
Because EMS is based on SMS, it can use SMS
centres the same way that SMS does. EMS works
on all Global System for Mobile communications
(GSM) networks. EMS senders can use text,
melodies, pictures, sounds, and animations to
enhance the expressive power of messages that are
limited by the display constraints of mobile devices.
Active Folder
Ability to answer a call simply by opening the
phone.
Call Barring
Ability to restrict outgoing and incoming calls.
GPRS (General Packet Radio Service)
Call Diverting
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
GSM (Global System for Mobile
Communication)
Ability to inform users that they have an incoming
call when engaged on another call.
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
146
147
Glossary
Java
Glossary
PIN (Personal Identification Number)
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
Roaming
MMS (Multimedia Message Service)
Use of your phone when you are outside your home
area (when travelling for example).
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
148
149
Glossary
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marke
d
and
on the phone, the
purpose of which:
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
150
Index
ending • 23
A
holding • 47
international • 22
making • 22
Access codes • 130
Accessories •
9
Active folder, set • 96
Alarm (6.4) • 105
Alert type (4.3) • 85
Anykey answer • 96
Auto light, set • 94
Auto redial, set • 96
Autopower alarm • 105
missed • 26 81
,
multi-party • 51
received (3.2) • 81
records (3) • 81
rediallingautomatically•
96
time (3.5) • 82
via phonebook • 35
waiting • 51
,
112
B
Card, SIM
Background image • 89
Backlight • 15
Barring
calls (7.2) • 110
password • 111
Battery
installing • 17
locking • 93
,
94
Care • 144
CB messages • 71
Changing
,
133
barring password • 111
password (5.5.4) • 92
PIN (5.5.2) • 92
charging • 19
installing • 18
low battery indicator •
20
precautions • 135
removing • 17
PIN2 (5.5.7) • 93
Characters
changing mode • 42
entering • 41
Closed User Group (7.6) •
114
Broadcast (1.9) • 71
Browser, WAP (8.2) • 118
Conference call • 51
Connect tone • 88
Contrast • 94
Copying
C
Calculator (6.5) • 106
Calendar (6.1) • 98
Caller groups
memos • 100
phonebook numbers •
34
editing • 37
searching • 36
Caller ID (7.5) • 114
Calls
tasks • 103
Cost of call • 83
CUG • 114
answering
Currency exchange (6.6) •
107
a call • 25
a second call • 51
barring (7.2) • 110
cost (3.6) • 83
dialled (3.3) • 82
diverting (7.1) • 108
emergency • 142
D
Date setting (6.3.2) • 104
Deleting
all call records • 82
all memos • 98
151
Index
Index
Media items • 68
Memory status
message (1.7) • 69
phonebook • 40
Memos
correcting • 22
erasing • 34
fixed dial • 93
own • 90
pasting phonebook • 34
searching/dialling • 35
storing • 31
all messages • 69
Groups
caller • 37
user • 114
all objects • 68
all tasks • 103
memos • 100
missed calls • 81
objects • 68
phonebook numbers •
34
I
copying • 100
deleting • 100
editing • 100
Icons, description • 14
Inbox, messages
picture (2.1) • 73
text (1.1) • 61
writing • 99
received messages • 62
,
O
Menu style • 90
Menus
74
Options, select • 29
Organiser (6) • 98
Outbox, messages
picture (2.2) • 75
text (1.2) • 63
sent messages • 63
,
75
Internet • 118
accessing by scroll • 54
accessing by shortcuts •
55
tasks • 103
Dialled calls (3.3) • 82
Display
J
list • 55
contrast • 94
external • 16
icons • 14
language, change • 91
layout • 13
Java services • 124
Message tone (4.5) • 86
Messages
Own number (5.3) • 90
K
cell broadcast • 71
greeting • 90
P
Key tones
multimedia • 73
picture (2) • 73
text (1) • 61
Password
Downloads (8.3) • 124
DTMF tones, send • 49
muting/sending • 49
selecting (4.4) • 85
volume, adjust • 24
Keys
barring
changing • 111
description • 133
phone
voice • 70
E
Microphone, mute • 48
MIDlets, launch • 124
Minute minder • 88
description • 11
location • 10
shortcut • 97
changing • 92
description • 130
Phone
lock (5.5.3) • 92
password • 130
switching on/off • 21
Phonebook
Earpiece volume • 24
Editing
Missed calls • 26
,
81
memos • 100
MMS, using • 73
missed calls • 81
phonebook number • 34
tasks • 102
L
Morning call • 105
Multimedia messages • 73
Multi-party calls
dropping • 53
making • 51
private conversation •
52
Muting
Language (5.4) • 91
Last number, redial • 23
Length of calls • 82
Letters
to do list • 101
copying • 34
editing • 34
Emergency calls • 142
Error tone • 88
,
88
erasing • 34
External display • 16
changing mode • 42
entering • 41
Light
backlight • 15
service • 16 95
Locking
phone (5.5.3) • 92
SIM card (5.5.5) • 93
Low battery indicator • 20
Lower-case characters,
enter• 44
options • 34
pasting • 34
F
all sounds • 28
key tones • 49
microphone • 48
searching/dialling • 35
speed-dialling • 38
storingnumbers/names•
31
,
94
FDN mode • 93
,
Fixed Dial Number mode • 93
Folder tone (4.6) • 87
Funbox (8) • 117
Picture messages
inbox (2.1) • 73
outbox (2.2) • 75
settings (2.5) • 78
writing (2.3) • 76
PIN
N
Names
Functions, select • 29
entering • 41
searching/dialling • 35
storing • 31
G
Games (8.1) • 117
Graphic logo • 95
Greeting message (5.2) • 90
M
Network selection (7.4) • 113
Network services (7) • 108
Numbers
changing • 92
checking • 91
description • 131
Maintenance • 144
copying phonebook • 34
152
153
Index
PIN2
Text
changing • 93
changing mode • 42
entering • 41
description • 132
Power on/off tone (4.7) • 87
Problems, solve • 127
PUK • 131
Text messages
broadcast (1.9) • 71
inbox (1.1) • 61
memory status (1.7) •
69
PUK2 • 132
outbox (1.2) • 63
settings (1.5) • 67
templates (1.4) • 66
writing (1.3) • 64
R
Received calls (3.2) • 81
Redialling
automatically • 96
last number • 23
Reset settings (5.9) • 97
Ring
tone (4.1) • 84
type, alert (4.3) • 85
volume (4.2) • 84
Roaming • 113
Time
call • 82
format (6.3.4) • 104
setting (6.3.1) • 104
world (6.3.3) • 104
To do list (6.2) • 101
Tone
connect • 88
error • 88
folder • 87
S
Safety
keypad • 85
message • 86
power on/off • 87
ring • 84
information • 134
precautions •
7
Schedule • 98
Security (5.5) • 91
Service light • 16 95
Shortcut (5.8) • 97
Silent mode • 28
SIM card
Travel adapter • 19
,
U
Upper-case characters, enter
•
44
installing • 17
locking • 93
User group • 114
SIM Lock (5.5.5) • 93
SMS, using • 50 61
V
,
Soft keys, using • 29
Sound settings (4) • 84
Speed-dialling • 38
Vibration • 85
Voice mail (1.8) • 70
Voice server • 70
Volume, adjust
earpeice • 24
T
keypad tone • 24
ring • 84
T9 mode • 43
Tasks, to do list
creating • 101
editing • 101
Templates, message (1.4) •
66
W
Waiting call • 51
Wallpaper • 89
,
112
WAP Browser (8.2) • 118
World time (6.3.3) • 104
154
155
156
|