SGH-Blast Series
P O R T A B L E Q U A D - B A N D
M O B I L E
P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Blast_UVGF8_CH_072307_F10
Table of Contents
Section 1: Getting Started ..........................................................................4
Activating Your Phone ...............................................................................................4
Switching the Phone On or Off ..................................................................................8
Setting Up Your Voice Mail ........................................................................................8
Features of Your Phone ...........................................................................................10
Open View of Your Phone ........................................................................................11
Keys .......................................................................................................................11
Back View of Your Phone ........................................................................................13
Closed View of Your Phone .....................................................................................13
Display ...................................................................................................................14
Backlight ................................................................................................................15
Section 3: Call Functions ..........................................................................17
Making a Call ..........................................................................................................17
Adjusting the Call Volume .......................................................................................19
Answering a Call .....................................................................................................19
Call Records ...........................................................................................................19
Silent Mode ............................................................................................................22
Selecting Functions and Options .............................................................................22
Menu Navigation .....................................................................................................28
Menu Outline ..........................................................................................................29
Section 5: Entering Text ...........................................................................36
Changing the Text Input Mode ................................................................................36
Using T9 Mode .......................................................................................................37
Using Number Mode ...............................................................................................38
Using Symbol Mode ................................................................................................38
Using ABC Mode .....................................................................................................38
Section 6: Messages .................................................................................40
Types of Messages .................................................................................................40
Text Messages .......................................................................................................41
E-mail Messages ....................................................................................................42
Picture Messages ...................................................................................................43
Voice Note ..............................................................................................................46
Inbox ......................................................................................................................47
Outbox ....................................................................................................................51
Drafts .....................................................................................................................51
Templates ..............................................................................................................52
Voice mail ...............................................................................................................53
Delete all ................................................................................................................54
Settings ..................................................................................................................54
1
Memory Status .......................................................................................................57
Using Contacts List .................................................................................................59
Editing a Caller Group .............................................................................................63
Speed Dialing .........................................................................................................63
My Profile ...............................................................................................................64
Section 8: t-zones .................................................................................... 69
Section 9: Fun & Apps ............................................................................. 73
Voice recognition ....................................................................................................83
Image editor ...........................................................................................................87
Section 10: Organizer .............................................................................. 89
World Time .............................................................................................................96
Shortcut key .........................................................................................................103
Display settings ....................................................................................................104
Table of Contents
2
Network services ..................................................................................................113
Security ................................................................................................................115
Software update ...................................................................................................118
Memory status ......................................................................................................118
Reset settings .......................................................................................................118
Section 12: Camera .................................................................................119
Using the Camera .................................................................................................119
Take and Send .....................................................................................................119
Record video ........................................................................................................124
Photos ..................................................................................................................127
Videos ..................................................................................................................128
My Album .............................................................................................................129
My Journal ...........................................................................................................130
Health and Safety Information ...............................................................................131
Samsung Mobile Products and Recycling ..............................................................133
UL Certified Travel Adapter ...................................................................................133
Consumer Information on Wireless Phones ...........................................................133
Road Safety ..........................................................................................................140
Responsible Listening ...........................................................................................141
Operating Environment .........................................................................................143
Using Your Phone Near Other Electronic Devices ...................................................143
Potentially Explosive Environments .......................................................................145
Emergency Calls ...................................................................................................146
FCC Notice and Cautions .......................................................................................147
Other Important Safety Information .......................................................................147
Product Performance ............................................................................................148
Availability of Various Features/Ring Tones ...........................................................149
Battery Standby and Talk Time .............................................................................149
Battery Precautions ..............................................................................................149
Care and Maintenance ..........................................................................................151
Standard Limited Warranty ...................................................................................152
3
Activating Your Phone
Section 1: Getting Started
Topics Covered
•
•
•
This section explains how to start using your phone by first configuring your
hardware, activating your service, and then setting up your voice mail.
Activating Your Phone
When you subscribe to a cellular network, you are provided with a plug-in SIM card
loaded with your subscription details, such as your PIN, available optional services,
and many others features.
Installing the SIM Card
Important!: The plug-in SIM card and its contacts information can be easily damaged by scratching or
bending, so be careful when handling, inserting, or removing the card.
Keep all SIM cards out of reach of small children.
If necessary, switch off the phone by holding down the
image displays.
key until the power-off
1. Remove the battery cover by sliding the battery cover in the direction of the
arrow.
Getting Started
4
2. Carefully lift the battery cover away from the bottom of the phone.
3. Lift up and remove the battery.
4. Carefully slide the SIM card under the metal bracket and into the SIM card
socket until the card locks into place. Make sure that the card’s gold
contacts face into the phone and that the upper-left angled corner of the
card is positioned as shown below.
Note: If the card is not inserted correctly, the phone does not detect the SIM card. Remove the battery and
re-orient the card back into the slot.
5. Replace the battery:
• (1) Slide the battery back into the compartment so that the tabs on the end align
with the slots at the bottom of the phone.
• (2) Press the battery down until it clicks into place.
5
Activating Your Phone
Reinstall the battery cover by sliding it back onto the phone until you hear
it securely click. Make sure the battery is properly installed before
switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A travel adapter, which is
used for charging the battery, is included with your phone. Use only approved
batteries and chargers. Ask your local Samsung dealer for further details.
You can use the phone while the battery is charging, but doing so requires additional
charging time.
Note: You must fully charge the battery before using your phone for the first time. A discharged battery
recharges fully in approximately 4 hours.
1. With the battery installed, temporarily remove the plastic cover on the right
side of the phone and plug in the travel adapter’s connector into the jack.
Getting Started
6
Important!: Verify that the handset battery is installed prior to connecting the travel adapter. If the battery
is not installed and the travel adapter is connected the handset continuously power cycles and
prevents proper operation.
2. Plug the adapter’s power plug into a standard AC wall outlet.
+
Note: The previous illustration displays the incorrect method for connecting the charger. If attempted,
damage to the accessory port occurs therefore voiding the phone’s warranty.
3. When charging is finished, unplug the adapter’s power plug from the AC
wall outlet and then disconnect the travel adapter’s connector from the
phone.
4. Resecure the plastic cover over the interface jack on the phone.
7
Switching the Phone On or Off
Warning!: Failure to unplug the travel adapter before you remove the battery, can cause damage to
the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain; a warning tone
sounds and the “Battery low” message repeats at regular intervals on the display. In
this condition, your phone conserves its remaining battery power, not by turning off
the backlight, but by entering the dimming mode.
When the battery level becomes too low, the phone automatically turns off.
Switching the Phone On or Off
1. Press and hold the
key until the phone switches on.
2. If the phone asks you to enter the phone password, use the keypad to enter
this password and press either the OK soft key or the
key.
3. If the phone asks for a PIN, use the keypad to enter the PIN and press
either the OK soft key or the
The phone searches for your network and after finding it, the term
“T-Mobile” displays on the upper left half of your screen. Now you can
make or receive calls.
Note: The display language is preset to Automatic at the factory. To change the language, use the
4. When you wish to switch off the phone, press and hold the
key until
the power-off image displays.
Setting Up Your Voice Mail
For new users, follow the instructions below to set up voice mail:
1. In Idle mode, press and hold the
key on the keypad.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and your name.
Note: These steps may be different depending on your network.
Getting Started
8
Accessing Your Voice Mail
You can press and hold the
key on the keypad or use the phone’s menu to
access your voice mail. To access voice mail using the menu:
1. In Idle mode, press the Menu soft key.
2. Highlight Messages and press the Select soft key or the
3. Highlight Voice mail and press the Select soft key or the
key.
key.
4. Highlight Call voice mail and press the Select soft key or the
key.
Your phone dials the specified voice mail number.
5. When connected, follow the voice prompts from the voice mail center.
Changing the Voice Mail Number
Your SIM card gives you the default service number of the voice mail center.
However, should you need to change the number, use the following procedures:
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Highlight Messages and press the Select soft key or the
key.
key.
3. Highlight Voice mail and press the Select soft key or the
4. Highlight Voice server number and press the Select soft key or the
key.
5. Highlight Voice mail and press the Options soft key.
6. Highlight Edit and press the Select soft key or the
key. Or, you may
highlight Delete to delete the number.
7. Edit the name if desired, and then press the Down Navigation key to edit
the number.
8. Press the Options soft key, highlight the Save option, and press the Select
soft key or the
key.
9. Press the
key to return to Idle mode.
9
Features of Your Phone
Section 2: Understanding Your Phone
Topics Covered
•
•
•
•
•
•
•
This section outlines some key features of your phone. It also displays the screen and
the icons that display when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone.
• 1.3 Megapixal Camera with 4x Digital Zoom
• Bluetooth® Wireless Technology
• User friendly, menu driven access to features and options
• Instant Messaging capability
• Sound/Image media capability
• Fun & Apps feature provides files, sounds, images, videos, music, games, Music
Player, camera, voice recognition, and image editor.
• Organizer feature provides alarms, calendar, tasks, notes, calculator, tip calculator,
world time, synchronization, unit conversion, timer and Stopwatch.
Understanding Your Phone 10
Open View of Your Phone
The following illustrations show the main elements of your phone:
1. Earpiece
16. Display
15. Navigation
(Up/Down/Left/Right) keys
2. Left Soft key
3. Volume keys
14. Right Soft key
13. OK (Select) key
12. Shortcut key
4. t-zone key
5. Send key
11. Power On/Off
(Exit) key
10. Cancel/Clear key
6. Voice mail key
7. Alphanumeric
keys
9. Microphone
8. Special function keys
Keys
The following list correlates to the illustrations.
1. Earpiece allows you to hear the other caller and the different ring tones or
sounds offered by your phone.
2. Left Soft key allows you to select soft key actions or menu items
corresponding to the bottom left line on the display screen.
3.
Volume keys allow you to adjust the Ring volume in standby mode (with
When
the phone open) or adjust the Speaker volume during a call.
receiving an incoming call, if you press the volume key, you can mute the
ring tone. If you press and hold the volume key, you can reject the call.
4. t-zone key in Idle mode, acts as a t-zone shortcut key.
5. Send key allows you to make or answer a call. In Idle mode, recalls the
last number dialed or received when held down.
6. Voice mail key allows you to quickly access your voice mail. Press and
hold this key for two seconds to automatically dial your voice mail’s phone
number.
11
Keys
7. Alphanumeric keys allow you to enter numbers, letters, and some special
characters.
8. Special Function keys allow you activate unique features while in Idle
mode. In Idle mode, if you press and hold the # key, you can turn on the
Silent Mode.
9.
during phone calls and allows other callers to hear
Microphone is used
you clearly when you are speaking to them. It is also used in making voice
note recordings.
10. Cancel/Clear key deletes characters from the display. In Menu mode, this
key returns you to the previous menu level.
11. Power On/Off (Exit) key ends a call. Press and hold this key for two
seconds to turn your phone on or off. While in the Menu mode, it returns
the phone to Idle mode and then cancels your input.
12. Shortcut key opens the application switch window which allows you to
select from a group of different applications without having to exit from the
currently active application.
13. OK (Select) key allows you to accept the choices offered when navigating
through a menu.
14. Right Soft key allows you to select soft key actions or menu items
corresponding to the bottom right line on the display screen. It also
provides quick access to your Phonebook.
15. Navigation key scrolls through the phone’s menu options and acts as a
shortcut key from standby mode.
In Menu mode, scrolls through the phone’s menus and Phonebook.
In Idle mode:
• Down key: allows you to directly access your Contact list.
• Up key: allows you to directly access the Call records.
• Left key: allows you to directly access Text messaging (New message).
• Right key: allows you to directly access Voice note.
Tip: When entering text, use the Left or Right Navigation key to mark the position of the cursor.
16. Display shows all the information needed to operate your phone, such as
the received signal strength, phone battery level, and time.
Understanding Your Phone 12
Back View of Your Phone
The following illustration shows the back, open view of the phone.
1. Camera lens
2. Mirror (self portrait)
1. Camera lens allows you to aim and shoot a picuture using the camera.
2. Mirror allows you to center the camera lens for self portraits.
Closed View of Your Phone
The following illustrations show the external elements of your phone
1. External speaker
2. Volume keys
3. External display
5. Camera key
7. Alphanumeric
keys
8. Special function keys
4. Power/Accessory
Interface connector
1. External speaker allows you to hear the different ring tones or sounds
offered by your phone.
2.
Volume keys allow you to adjust the Ring volume in standby mode (with
When
the phone open) or adjust the Speaker volume during a call.
receiving an incoming call, if you press the volume key, you can mute the
ring tone. If you press and hold the volume key, you can reject the call.
3. External display shows the received signal strength, phone battery level,
and the time.
13
Display
4. Power/Accessory Interface connector allows you to connect a power
cable or optional accessories, such as a USB/data cable or a hands-free
headset for convenient, hands-free conversations.
5. Camera key allows you to take pictures when you are in camera mode.
Launches the camera with a press.
Display
Your phone’s display screen provides a wealth of information about your phone’s
status and options. The display has three areas:
Icons
Text and graphics area
Soft key function indicators
Icons
This list identifies the symbols you’ll see on your phone’s display screen:
Shows the received signal strength. The greater the number of
bars, the stronger the signal.
Shows the level of your battery. The more bars you see, the
more power remains.
Displays when a call is in progress.
Displays when the phone is not receiving a signal or is in
Airplane mode.
Displays when Bluetooth wireless technology is active.
Displays when Silent Mode is active.
Displays when you missed a call.
Understanding Your Phone 14
Displays when a new text message is received.
Displays when a new voice mail is received.
Displays when a new picture message is received.
Displays when you set an alarm to ring at a specified time.
Displays when the Call Forwarding feature is active. For more
Displays while you are connecting to the Internet.
Displays while your phone is synchronizing data with the
network.
Backlight
A backlight illuminates the internal display and the keypad. When you press any key,
the backlight comes on. It goes off when no keys are pressed within a given period
of time, depending on the setting within the Backlight menu. The display turns off
after one minute to conserve battery power.
The On setting is how long the keypad backlight is on. The Dim option is how much
longer after the keypad backlight goes off that the display remains lit.
To specify the length of time the backlight is active, access the Backlight menu:
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Settings icon. Press the Select soft
key or the
key to enter the menu.
3. Highlight the Display settings option and press the Select soft key or the
key.
4. Highlight the Backlight option and press the Select soft key or the
key.
5. Highlight the On option. Use the Left or Right Navigation key to select the
time the backlight is on. You may choose between 15 sec, 30 sec,
1 min, 3 min, or 10 min.
15
Backlight
6. Press the Down key to take you to the Dim option. Use the Left or Right
Navigation key to select the time the Dimming mode is on. You may choose
between Off, 15 sec, 30 sec, 1min, or 3 min.
7. Press the Save soft key to retain your new settings.
Display
Your phone has a display on the front of the phone. The display indicates when you
receive an incoming call or message and also displays any alarms for the specified
time. The backlight turns on and the corresponding icon displays on the screen.
The display shows the current time on a digital clock.
Understanding Your Phone 16
Section 3: Call Functions
Topics Covered
•
•
•
•
•
•
This section describes how to make or answer a call. It also explains the features and
functionality associated with making or answering a call. For more information on
Making a Call
When the idle screen displays, enter the number you wish to dial and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu, the phone automatically redials
up to 10 times when the person does not answer the call or is already on the phone, provided your
Making an International Call
1. Press and hold the
2. Enter the country code, area code, and phone number.
3. Press the key to make the call.
key. The + character displays.
Correcting the Number
1. To clear the last digit displayed, press the
key.
2. To clear any other digit in the number, press the Left or Right Navigation
key until the cursor is immediately to the right of the digit to clear and then
press the
key. You can also enter a missing digit.
3. To clear the entire display, press and hold the
key.
17
Making a Call
Ending a Call
Briefly press the
Redialing the Last Number
ᮣ
key when you want to end your call.
The phone stores the numbers of the calls you’ve dialed, received, or missed if the
caller is identified.
To recall any of these numbers:
1. If you typed characters on the display, press the
key to return to Idle
mode.
2. Press the
key to display a list of the most recent numbers used in
the order you dialed or received them.
3. Use the Up and Down Navigation keys to scroll through the numbers and
highlight the number you want.
4. To view details of the number, press the
key.
Before you dial the number, you may also press the Options soft key to
display the following options:
• Details: Displays the caller information, date and time of the call.
• Call back: Places a call back to the number.
• Send message: Allows you to send a Text message, Picture message, or
Voice note to the number.
• Save to Phonebook: Stores the number in your Phone memory.
• Delete: Allows you to delete the selected number or All call records.
• Add to block list: Adds the selected number to the blocked calls list.
5. To dial the number, press the
key.
Making a Call from the Phonebook
You can store regularly used phone numbers into the phone’s memory (Phonebook).
Once you store a number in the Phonebook, you can press only a few key to dial the
stored number. By using the Speed Dial feature you can also assign your most
frequently-used numbers to number keys.
Call Functions 18
Adjusting the Call Volume
During a call, use the Volume keys on the left side of the phone, to adjust the
speaker volume.
ᮣ
Press the key to increase the volume level and the key to decrease
the level.
In Idle mode, you can also adjust the ring volume using these keys.
Answering a Call
When somebody calls you, the phone rings and displays the incoming call image.
The caller’s phone number, or name if stored in Phonebook, displays.
1. Press the
key or the Accept soft key to answer the incoming call.
If the Anykey answer option in the Extra Settings menu is activated, you
can press any key to answer a call except for the
key and the
Reject soft key.
Note: To reject an incoming call, press the Reject soft key or
key.
2. Press the
key to end the call.
Note: You can answer a call while using the Phonebook or menu features. After ending the call, the phone
returns to the function screen you were previously using.
Call Records
All incoming, outgoing and missed calls are listed in the Call Records. You can also
view Call time records.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Call records icon and press the
Select soft key or the
key to enter the menu.
Note: While in Idle mode, press the
key to access the incoming, outgoing, and missing
call records.
19
Call Records
The following Call Record options are available:
All calls
This menu lets you view the 90 most recent calls you received, dialed, and missed.
The name or number, if already stored in your Phonebook, displays with the number
of occurrences for each number.
Note: At any time while you are in Call Records, you may use the Left or Right Navigation keys to scroll
between All calls, Missed calls, Incoming calls, and Outgoing calls.
Missed calls
This menu lets you view the 30 most recent calls you received, but did not answer.
The name and number, if already stored in your Phonebook, displays with the
number of occurrences for each number.
Viewing Missed Calls
When you are unable to answer a call for any reason, you can find out who is calling
you, if this service is available, so that you can call the person back.
The number of calls you missed displays on the idle screen immediately after a call
is missed.
To view a missed call immediately:
1. If the display is off, press the volume key to turn the display on.
2. Press the View soft key.
The number corresponding to the most recently missed call displays, if available.
3. To scroll through the missed calls, press the Up or Down Navigation key.
4. To call the number displayed, press the
key.
5. Press the Options soft key for the following options:
• Details: Displays details of the missed call including name, number, dates and
times of the calls.
• Call back: Places a call back to the number.
• Send message: Allows you to send a Text message, Picture message, or Voice
note back to the missed number.
• Save to Phonebook: Stores the number in your Phone memory.
• Delete: Allows you to delete the selected number or delete all call records.
• Add to block list: Adds the selected number to the blocked calls list.
Note: You can press the
key at any time to exit the Missed Call feature.
Call Functions 20
Incoming calls
This menu lets you view the 30 most recent calls you received.
The name and number, if already stored in your Phonebook, is then displayed with
the number of occurrences for each number.
Outgoing calls
This menu lets you view the 30 most recent calls you dialed.
The name and number, if already stored in your Phonebook, is then displayed with
the number of occurrences for each number.
Delete all
This menu allows you to delete all of the records in each call record separately, or
you can delete all of your call records at one time.
1. Highlight the type of calls you want to delete and press the
key to
make a check mark.
Note: Selecting the All calls check box automatically selects all the entries in the Delete all menu.
2. Press the Delete soft key to delete the calls.
3. When a confirmation message displays, press the Yes soft key or
key to confirm.
Call time
This menu lets you view the time log for calls both made and received.
Note: The actual time invoiced by T-Mobile may differ from times displayed due to network features and
service plan.
The following time logs are available:
• Last call time: shows the length of your last call.
• Total outgoing: shows the total length of all calls made since the timer was
last reset.
• Total incoming: shows the total length of all calls received since the timer was
last reset.
• Life time is: shows the total length of time for both incoming and outgoing calls.
The length of call time must be at least 1 minute to increment this field. You
cannot clear this information.
21
Silent Mode
Silent Mode
Silent Mode is convenient when you wish to stop the phone from making any noise,
(in a theater for example).
In Idle mode, press and hold the
and the Silent Mode icon (
phone vibrates.
key until the “Silent Mode Activated” message
) display. In Silent Mode, instead of sounds, your
To exit and reactivate the previous sound settings, press and hold the
until the “Silent Mode Deactivated” message displays.The Silent Mode icon (
longer displays.
key again
) no
Selecting Functions and Options
Your phone offers a set of customizable functions. These functions are arranged in
menus and sub-menus, and accessed using the two soft keys. Each menu and
sub-menu allows you to view and alter the settings of a particular function.
Soft Keys
The roles of the soft keys vary depending on the function you are currently using.
The labels on the bottom line of the display just above each key indicate their current
role.
Press the
Press the Left soft
key for Menu
mode.
Right soft key
to access the
Ph.Book
menu.
Call Functions 22
Selecting Options
To view the various functions and options available, you must select the one you
want by:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted, press the Select
soft key or the
key.
3. To view the next function or highlight the next option on a list, press the
Down Navigation key.
4. To move back to the previous function or option on a list, press the Up key.
5. To move back up one level in the menu structure, press the Back soft key.
6. To exit the menu structure without changing the settings, press the
key.
In some functions, you are asked for a password or PIN. Enter the correct code and
press the OK soft key or the
key.
When you access a list of options, your phone highlights the currently active option.
If, however, there are only two options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently active, so that you can select it.
Options During a Call
Your phone provides a number of control functions that are available for use during
a call.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person
cannot hear you.
Example: You wish to say something to a person in the room but do not want the person on the phone to
hear you.
To switch the microphone off temporarily:
ᮣ
Press the Options soft key. Select the Mute option and press the
Select soft key or the key. The other person can no longer hear you.
The Mute icon ( ) displays at the bottom left of the screen.
To switch the microphone back on:
Press the Options soft key. Select the Unmute option and press the Select
soft key or the key. The other person can hear you again.
ᮣ
23
Selecting Functions and Options
Putting a Call on Hold
You can place the current call on hold whenever you want. If your netowrk supports
this service, you can also make another call while a call is in progress.
To place a call on hold:
1. Press the Options soft key, highlight the Hold option, then press the Select
soft key or the
key.
2. Press the Resume soft key to reactivate the call.
To make a new call while a call is in progress:
1. Enter the new phone number that you wish to dial or look it up in the
Contact list.
2. Press the
key to dial the second call.
The first call is then automatically put on hold.
- Or -
1. Press the Options soft key, select Hold, and press the
key. This
places the currently active call on hold and allows to make a new call.
2. Make the second call in the normal way.
When there is an active call and a call on hold, you may switch between the two
calls by placing the current held call to active and then placing the other call on hold.
To switch between the two calls:
1. Press the Options soft key, select Swap, and press the
key. The
current active call is placed on hold and the call on hold is then reactivated
so that you can continue conversing with that person.
2. Press the
key when you are finished or want to end the call.
Using the Speakerphone
While on a call, you can use your Speakerphone by following these steps:
1. Press the Spkr on soft key.
2. To turn the Speakerphone off, press the Spkr off soft key.
Important!: For safety information related to speakerphone use, see "Responsible Listening" on page 141.
Call Functions 24
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the Keypad tone option is
Off, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones of the
keys, which then allows you to press keys without hearing annoying key tones
during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send DTMF
option must be selected.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key.
2. Press the Down Navigation key to highlight Phonebook and press the
key.
3. Press the Down Navigation key to highlight the Contact list option and
press the Select soft key or the
key.
With the Phonebook entries then listed:
4. Enter the name that you wish to find in the textbox located above the
entries. If you enter the first few letters of the name, the Phonebook entries
are listed starting with the first entry matching your input.
Or, use the Up or Down Navigation key to highlight the contact that you
desire.
5. To view the highlighted entry, press the Options soft key.
6. Highlight the View option and press the Select soft key or the
key.
The Contact information displays.
25
Selecting Functions and Options
Call Waiting
The Call waiting option must be set to Activate before you can answer an incoming
You are then notified of an incoming call with a call waiting tone.
To answer a new call while another call is in progress:
1. Press either the Accept soft key or the
key to answer the incoming
call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft key, highlight
Swap and press the Select soft key or the key.
3. To end a call on hold, press the Options soft key and select the End held
call option. Then press the Select soft key or the
4. To end the current/remaining call, press the
Making a Multi-Party Call
key.
key.
A multi-party call is a network service that allows up to six people to take part
simultaneously in a multi-party or conference call.
For further details about subscribing to this service, contact T-Mobile customer
service.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Press the Options soft key and select the New call option.
3. Call the second participant in the normal way. The first call is automatically
placed on hold.
4. To join the first participant to this multi-party call, press the Options soft
key and select Join. Press the Select soft key or the
key.
Note: These first two calls are then grouped together on screen and displayed with an adjacent number
corresponding to the order in which the calls were made.
5. Press the Options soft key and then select the New call option to add a
new person to a second multi-party call group.
Call Functions 26
6. Press the Options soft key or the
key. Select the Join option and
key.
press the Select soft key or the
Note: There are a maximum of two callers that can be joined to a single multi-party line. Additional callers
would participate in a new Multiparty session which can be held in conjunction with the previous
multiparty call. Each of these multi-party calls can then be placed on hold or swapped.
Having a Private Conversation With One Participant
When there are two participants in a multi-party session, it might be necessary to
place one of those participants on hold so that a private conversation can be held
with a single caller. While you are in a multi-party call:
1. Press the Options soft key and choose the Split option. Press the Select
soft key or the
key.
The short list of call participants then displays with the first caller selected.
2. Press the Up or Down Navigation key to highlight the person with which
you want to talk privately, and press the Select soft key or the
key.
Note: You can now talk privately to that person while the other participants can continue to converse with
each other. If there is only one other participant, that person is then placed on hold.
3. To return to the multi-party call, press the Options soft key and select
Join. Press the Select soft key or the
key. All of the multi-party call
participants can now hear each other again.
Dropping One Participant
1. Press the Options soft key and choose the Split option. Press the Select
soft key or the key. The short list of call participants displays.
2. Highlight the person you want to keep and press the Select soft key or the
key.
3. Press the Options soft key and highlight Remove. Press the Select soft
key or the
4. Press the Select soft key or the
This option allows you to continue talking to the other participants.
5. When you want to end the multi-party call, press the key.
key. The remaining participant on hold is highlighted.
key to drop the selected participant.
27
Menu Navigation
Section 4: Menu Navigation
Topics Covered
•
•
Menu Navigation
Menu Outline
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
You can tailor the phone’s range of functions to your needs using menus and
sub-menus. Menus and sub-menus can be accessed by scrolling using the
Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Scroll using the Navigation keys to reach a main menu
(for example: Settings). Press the Select soft key or the
key to enter
the menu.
3. If the menu contains sub-menus, (for example, Security), after highlighing
the sub menu, press the Select soft key or the
key to access it.
If the menu you selected contains further options, repeat this step.
4. To scroll through the menus, press the Up or Down Navigation keys.
5. To confirm the chosen setting, press the Select soft key, or the
key.
6. To return to the previous menu level, press the Back soft key, or the
key.
7. To exit the menu without changing the settings, press the
Using Shortcuts
key.
The menu items, such as menus, sub-menus, and options, are numbered and can
be accessed quickly by using their shortcut numbers. For the main menus, press the
corresponding number keys (1 to 0) to access any one of the shortcuts.
Example: Accessing the Security menu.
Menu Navigation 28
1. Press the Menu soft key.
2. Press the
key for Settings.
key for Security.
3. Press the
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
Important!: This menu navigation tree does NOT include or list UMA features.
1: Voice note
2: Call records
2.1: All calls
2.2: Missed calls
2.3: Incoming calls
2.4: Outgoing calls
2.5: Delete all
2.6: Call time
3: t-zones
3.1: Home
3.2: Enter URL
3.3: Bookmarks
3.4: Clear cache
4: IM and E-mail
4.1: IM
4.1.1: AIM
4.1.2: ICQ
4.1.3: Windows Live
4.1.4: Yahoo!
4.2: E-mail
5: Messages
5.1: Create new
5.1.1: Text message
5.1.2: Picture message
5.1.3: Voice note
29
Menu Outline
5.2: Inbox
5.3: Outbox
5.4: Drafts
5.5: Templates
5.6: Voice mail
5.6.1: Call voice mail
5.6.2: Voice server number
5.7: Delete all
5.8: Settings
5.8.1: Text messages
5.8.2: Picture message
5.8.2.1: Send settings
5.8.2.2: Receive settings
5.9: Broadcast messages**
5.9.1: Read
5.9.1.1: Archive
5.9.1.2: Temporary
5.9.2: Receive
5.9.3: Channel
5.9.3.1: All channels
5.9.3.2: Respective channels
5.9.4: Language
5.10: Memory status
6: Fun & Apps
6.1: Files
6.1.1: Sounds
6.1.1.1: Browse MegaTones
6.1.1.2: Browse HiFi Ringers
6.1.1.3: Sounds
6.1.1.4: Voice list
6.1.1.5: Memory card *
6.1.2: Images
6.1.2.1: Browse Wallpapers
6.1.2.2: Photos
6.1.2.3: My Album
Menu Navigation 30
6.1.2.4: My Journal
6.1.2.5: Downloaded images
6.1.2.6: Memory card *
6.1.3: Icons***
6.1.3.1: myFaves icons***
6.1.3.2: Browse myFaves icons***
6.1.4: Videos
6.1.4.1: Downloaded videos
6.1.4.2: Videos
6.1.4.3: Memory card *
6.1.5: Music
6.1.5.1: Music
6.1.5.2: Memory card *
6.1.6: Other files
6.1.6.1: Other files
6.1.6.2: Memory card *
6.1.7: Memory card *
6.1.8: Memory status
6.2: Games
6.3: Music Player
6.4: Camera
6.4.1: Take and Send
6.4.2: Record video
6.4.3: Photos
6.4.4: Videos
6.4.5: My Album
6.4.6: My Journal
6.5: Voice recognition
6.6: Image editor
7: Help
8: Organizer
8.1: Alarm
8.2: Calendar
8.2.1: Month view
8.2.2: Week view
31
Menu Outline
8.2.3: Day view
8.2.4: Schedule
8.2.5: Anniversary
8.2.6: Miscellaneous
8.2.7: Missed alarm events
8.2.8: Memory status
8.3: Tasks
8.4: Notes
8.5: Calculator
8.6: Tip calculator
8.7: World Time
8.8: Synchronization
8.8.1: Sync Now
8.8.2: Data to Sync
8.8.3: View Log
8.8.4: About Sync
8.9: Unit conversion
8.10: Timer
8.11: Stopwatch
9: Settings
9.1: Time & date
9.2: Phone settings
9.2.1: Language
9.2.2: Greeting message
9.2.3: Slide settings
9.2.4: USB settings
9.2.5: Extra settings
9.2.6: Airplane mode
9.3: myFaves settings***
9.4: Shortcut key
9.5: Display settings
9.5.1: Wallpaper
9.5.2: Info display
9.5.3: Skin
Menu Navigation 32
9.5.4: Brightness
9.5.5: Backlight
9.5.6: Dialing display
9.5.6.1: Font size
9.5.6.2: Font color
9.5.6.3: Background color
9.5.7: Calendar
9.5.8: Show caller information
9.6: Bluetooth
9.6.1: Turn Bluetooth On/Off
9.6.2: My devices
9.6.3: My visibility
9.6.4: My phone name
9.6.5: Security modes
9.6.6: Features
9.6.6.1: Headset
9.6.6.2: Handsfree
9.6.6.3: Bluetooth stereo headset
9.6.6.4: File transfer
9.6.6.5: Object push
9.6.6.6: Basic printing
9.6.6.7: Dial-up networking
9.6.6.8: Serial port
9.6.7: Help
9.7: Sound settings
9.7.1: Incoming call
9.7.2: Keypad tone
9.7.3: Message tone
9.7.4: Power-on/off tone
9.7.5: Slide tone
9.7.6: Silent mode
9.7.7: Extra tones
9.8: Synchronization
9.8.1: Sync Now
9.8.2: Data to Sync
33
Menu Outline
9.8.3: View Log
9.8.4: About Sync
9.9: Network services
9.9.1: Call forwarding
9.9.1.1: Forward always
9.9.1.2: Busy
9.9.1.3: No reply
9.9.1.4: Unreachable
9.9.1.5: Cancel all
9.9.2: Call barring
9.9.2.1: All outgoing
9.9.2.2: International
9.9.2.3: International except home
9.9.2.4: All incoming
9.9.2.5: Incoming while abroad
9.9.2.6: Cancel all
9.9.2.7: Change barring password
9.9.3: Call waiting
9.9.3.1: Voice calls
9.9.3.2: Data calls
9.9.3.3: Cancel all
9.9.4: Network selection
9.9.4.1: Search now
9.9.4.2: Default setup
9.9.5: Caller ID
9.10: Security
9.10.1: PIN check
9.10.2: Change PIN
9.10.3: Phone lock
9.10.4: Change password
9.10.5: Lock application
9.10.6: FDN mode
9.10.7: Change PIN2
9.11: Software update
Menu Navigation 34
9.12: Memory status
9.12.1: Shared memory
9.12.2: Messages
9.12.3: Files
9.12.4: Calendar
9.12.5: Phonebook
9.12.6: Notes
9.13: Reset settings
*
Displays only if a memory card is inserted.
** Displays only if supported by your SIM card.
*** Service dependant.
35
Changing the Text Input Mode
Section 5: Entering Text
Topics Covered
•
•
•
•
•
Using ABC Mode
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text system to reduce the number of key strokes associated with entering text.
Changing the Text Input Mode
When using your phone, you often need to enter text, such as when storing a name
in your Phonebook, creating your personal greeting or scheduling events on your
calendar. You can enter alphanumeric characters by using your phone’s keypad.
Your phone has the following text input modes:
• T9 mode: this mode allows you to enter words with only one keystroke per letter.
Each key on the keypad has more than one letter; for example, you press
enter J, or K. However, the T9 mode automatically compares the series of
to
keystrokes you make with an internal linguistic dictionary to determine the most
likely word, thus requiring fewer keystrokes than the traditional ABC mode.
• ABC mode: this mode allows you to enter letters by pressing the key labeled with
the corresponding letter.
• Number mode: this mode allows you to enter numbers.
• Symbol mode: this mode allows you to enter symbols, such as punctuation
marks.
Note: When you are in a field where you can enter characters, the text input mode indicator displays at the
bottom right of the screen.
Example: Writing a text message.
Entering Text 36
1. Press the Right soft key (
) to change the text input mode.
Note: Each time you press the Right soft key (
), a different Text input mode indicator displays in the
lower right corner of your display.
The following options are available:
Eng
Eng
: T9 mode
1
: Number mode
: Symbol mode
: ABC mode
#
Eng
Eng
A
2. Enter text in the text message box using the selected text input mode when
the Text input mode indicator that you desire displays.
Using T9 Mode
T9 is a predictive text input mode that allows you to key in any character using
single keystrokes. This text input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, press any one of the letter keys to enter a word.
Press each key only once for each letter.
Example: To enter “Hello” in T9 mode, press the 5, 1, L, L, and O keys.
The word that you type displays on the screen. The word may change with
each consecutive key that you press.
2. Enter the whole word before editing or deleting the keystrokes.
3. Press the
key to insert a space and begin entering the next word.
To enter periods, hyphens, apostrophes, and other special characters press the
key then press the key that contains the associated symbol.
To shift case in T9 mode:
ᮣ
Press the
key.
There are 3 cases: Initial capital, Capital lock, and Lower case.
Tip: You can move the cursor by using the Navigation keys.
37
Using Number Mode
To delete characters:
Press the
Using Number Mode
The Number mode enables you to enter numbers into a text message.
Press the keys corresponding to the digits you want to enter.
ᮣ
key. Press and hold the
key to clear the display.
ᮣ
Using Symbol Mode
Symbol mode enables you to insert symbols and punctuation marks into text. To
display a list of symbols press the Right navigation key until the symbols display on
the screen.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Navigation keys.
3. To clear the symbol(s), press the
key. When the input field is empty,
this key returns the display to the previous mode.
4. To insert the symbol(s) into your message, press the OK soft key or the
key.
Using ABC Mode
To use ABC mode, use the letter keys to enter your text.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
• And so on
2. Select the other letters in the same way.
• To enter periods, hyphens, apostrophes, and other special characters press the
key then press the key that contains the associated symbol.
• To shift case in ABC mode, use the
Capital lock, and Lower case.
key. There are 3 cases: Initial capital,
Note: You can move the cursor by using the Navigation keys.
To delete letters:
ᮣ
Press the
key. Press and hold the
key to clear the display.
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or
a different letter on the same key, just wait for a few seconds for the cursor to automatically move to
the right, and then select the next letter.
Entering Text 38
Keys
By default, the first letter of an entry is capitalized and all consecutive letters are
kept in lowercase (unless the
key is used). After a character is entered, the
cursor automatically advances to the next space after two seconds or when you
enter a character on a different key.
Characters scroll in the following order (lowercase characters shown in
parentheses):
Q W ! q w !
Z X z x (switches to Symbol mode
when held)
E R 1 e r 1
T Y 2 t y 2
U I 3 u i 3
O P . o p .
A S ? a s ?
C V 7 c v 7
B N 8 b n 8
M 9 m 9
Delete
Alt (when pressed before typing it
inserts a number)
D F 4 d f 4
G H 5 g h 5
J K 6 j k 6
L , l ,
* (press and hold to insert an
asterisk)
0 (inserts a space)
(Alt+0 inserts the number 0)
# (press and hold )
(shifts case in ABC mode)
Enter
39
Types of Messages
Section 6: Messages
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This section describes how to send or receive different types of messages. It also
explains the features and functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
• Text Messages
• E-mail Messages
• Picture Messages
• Voice Note
• Voice Mail
• Broadcast Messages (SIM Dependent)
• Instant Messaging
Messages 40
Text Messages
Short Message Service (SMS) allows you to send and receive short text messages to
and from other mobile phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include simple graphics, melodies,
and animated images in your messages. To use this feature, you must subscribe to
T-Mobile's message service.
The Message icon ( ) displays when you receive a new text message. When the
memory is full, the message icon flashes on your phone and you cannot receive any
new messages. You must delete a message before you can receive additional
messages.
ᮣ
Use the Delete option in each message box to erase obsolete messages.
Create new
In this menu, you can write and send a text message.
Creating a Simple Text Message
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Create new option and press the Select soft key or the
key.
4. Highlight the Text message option and press the Select soft key or the
key.
5. Create your message.
You can enter up to 160 standard Alphabet characters per page in your message. The message can
be up to 12 pages long for a total of 1920 characters.
6. When you finish entering your message, press the Options soft key. The
following options are available:
• Insert from: allows you to insert from the Text template, Phonebook, or
Bookmarks. The Text messages template allows you to apply one of the preset
message templates to the text. Select one of the 10 items stored in the Text
messages Template menu. Phonebook allows you to add names and phone
numbers to your message. Bookmarks allows you to add Internet addresses to
your message.
• Add content: allows you to add a picture, animation, or melody to your
message.
41
E-mail Messages
• Attach: allows you to attach a Namecard, Schedule, Anniversary item,
Miscellaneous item, or Task to your message.
• Save to Drafts: save the message to your Phone or SIM card.
• Select language: allows you to set the language to English, Français, and
Español.
• Text style: allows you to format the style of the text.
For the Text size, Large, Medium, and Small sizes are available. Text mode
options are Normal, Underline, and Strikethrough. The options for Bold and Italic
are set by using the
key to place a checkmark next to the style attribute.
Alignment options are Left, Center, and Right.
• Back: allows you save to your draft folder without sending.
7. Press the Send
key.
8. Highlight one of the following send options:
• Recent recipients: allows you to select a number or an address from the last
30 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• New number: allows you to enter a phone number.
9. Enter a number then press the OK soft key.
The number you selected is entered in the To text box.
10. Press the Add soft key for the following options:
• Recent recipients: allows you to select from recipients of your previous
messages.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• Phone number: allows you to enter a phone number.
• Group: allows you to send the text message to an entire group such as Family,
Office, Friends or Not assigned.
• FDN list: allows you to enter a contact from your FDN list.
11. When you finish entering the destinations, press the Send
key to
send the message.
E-mail Messages
The E-mail option allows you to send or receive pop e-mail from AOL, Yahoo! or you
can select from two, other predefined broadband e-mail providers.
Messages 42
E-mail Setup
This options allows you to select the e-mail accounts you want to use.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the IM and E-mail icon. Press the
Select soft key or the
key to enter the menu.
3. Highlight the E-mail option and press the Select soft key or the
key.
4. Highlight an account, and press the Select soft key or the
key.
- Or -
5. If you selected Other 1 or Other 2, press the
key, and fill in the
E-mail address and Password.
6. Press the
key to place a check mark next to the Keep me signed
in/on or New Mail Notification options.
7. Press the
key to place a check mark next to the Keep me signed in
or New Mail Notification options.
8. Press the Sign In/Sign On
soft key.
9. When the Congratulation! e-mail setup message displays, press the OK
soft key to confirm your selection.
The handset restarts after setup.
Sending Options
This option allows you to configure your sending options such as Priority, Add
signature check box, Edit name, Edit telephone number and Edit note for e-mail.
Account Settings
This option allows you to modify your e-mail account settings.
Note: Account settings vary depending on your e-mail account.
Picture Messages
This menu allows you to use the Multimedia Message Service (MMS).
Picture Messaging is a messaging service that provides delivery of personal picture
messages from phone to phone or from phone to e-mail.
In addition to the familiar text content available via traditional text messages, picture
messages can contain images, graphics, voice, and audio clips.
43
Picture Messages
A Picture Messaging message is a multimedia presentation contained in a single file.
It is not a text file with attachments.
You must first retrieve a picture message from T-Mobile’s voice mail server before
you can view the message. The
displays in your Inbox list to indicate any not
yet retrieved Picture messages. The Message icon (i ) displays once you
successfully retrieve a new picture message from the voice mail server.
Using the Picture Messaging feature, your phone can receive and send messages
that contain multimedia files, such as photos, sounds and images that you
downloaded from the Internet and voice notes you recorded. This function is
available only if it is supported by your service provider. Only phones that offer
picture messaging features can receive and display picture messages.
Create new
This menu allows you to create a new picture message and then send it to one or
more destinations.
Creating and Sending a Picture Message
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Messages icon and press the
Select soft key or the
key to enter the menu.
3. Highlight the Create new option and press the Select soft key or the
key.
4. Highlight the Picture message option and press the Select soft key or the
key.
5. Highlight Subject and press the
key.
6. Enter the subject of your message, press the Options soft key and select
Save.
Note: For more information about entering characters, see "Using ABC Mode" on page 38.
7. Highlight the Image & Video option and press the
key.
8. Highlight one of the following options and press the Select soft key or the
key.
• Take picture: launches the camera for you to take a picture.
• Downloaded images: allows you to select a previously downloaded image to
send in the picture message.
• Photos: allows you to select a picture from your images folder.
• Record video: allows you to record a video.
Messages 44
• Downloaded videos: displays a list of downloaded videos.
• Videos: displays a list of previously downloaded videos.
• Memory card: allows you to insert an image or video from the memory card.
This option displays only if you have a memory card inserted.
9. Select an image and press the Options soft key. Highlight the Add option
and press the Select soft key or the
10. Press the Send key. Your phone sends the Picture message.
To add a sound
11. Highlight the Sound option and press the
key to add it to your message.
key.
12. Highlight one of the following options and press the Select soft key or the
key.
• Record audio: allows you to record a new voice message.
• Sounds: allows you to select a sound from your Sounds folder.
• Voice list: takes you to the Voice list (Recorded audio) folder to select a
voice note to add.
• Memory card: allows you to insert an image, video, music, sounds, or Other
files from the memory card. This option displays only if you have a memory card
inserted.
13. Select a Sound or Voice list and press the Options soft key.
14. Highlight the Add option and press the Select soft key or the
key to
add the sound to your message.
15. Press the Send
key. Your phone sends the Picture message.
To add a text message
16. Highlight Message and press the
key.
key.
17. Enter your message and press the
18. To change the Subject or Message, select a category and press the
Options soft key. Highlight Edit to edit the item.
19. To change the image or sound, select a category and press the Options
soft key. Depending on the category selected, highlight Change to replace
the item.
20. When you finish creating the message, press the Send soft key.
45
Voice Note
21. Highlight one of the following send options, press the Send soft key or the
key:
• Recent recipients: allows you to select a number or an address from the last
30 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• New recipient: allows you to manually enter a phone number or e-mail
address.
• My Album: allows you to send the message to My Album.
• My Journal: allows you to send the message to My Journal.
The number or addresses selected displays in the To text box.
22. If you selected more than three recipients, press the Options soft key for
the following options:
• Add recipients: allows you to add additional recipients to this message.
• Change recipient: allows you to change the To, Cc, or Bcc additional
numbers.
23. Press the Send
key. Your phone sends the Picture message.
Voice Note
In this menu, you can record a voice note up to one minute long and then
immediately send it via Picture Messaging.
Creating and sending a Voice note
When you access this menu, a timer displays on the screen.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Voice note icon. Press the Select
soft key or the
key to enter the menu.
3. Press the Record soft key to begin recording.
4. Record a memo by speaking into the phone’s microphone.
The display simultaneously shows the elapsed time and the
remaining time.
5. Press the Stop soft key when you are finished recording. Or, when the
recording time is expired, the display advances to the next screen.
Note: Your voice note automatically saves in the Voice list.
Messages 46
6. Press the Options soft key for the following options:
• Send to: allows you to send the Voice note.
• Play: plays back your Voice note.
• Re-record: discards the previous Voice note and enables you to record a new
voice note.
• Set default destination: allows you to remove or edit the default destination.
• Set as: allows you to save the voice note as a Ringtone, Caller ringtone, or
Alarm tone.
• Save: saves this recorded voice note to the voice list.
7. To send the Voice note, press the Send soft key or select the Send to
option in the Options menu.
8. Highlight one of the following send options:
• Recent recipients: allows you to select either a number or an address from the
last 30 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
phonebook.
• New recipient: allows you to manually enter a phone number or e-mail
address.
• My Album: allows you to send the message to My Album.
• My Journal: allows you to send the message to My Journal.
9. Highlight the selection and press the
key to mark the selection.
10. Press the Add soft key. The number you selected is entered in the
To text box.
11. If you selected more than three recipients, press the Options soft key for
the following options:
• Add recipients: allows you to add additional recipients to this Voice note.
• Change recipient: allows you to select To, Cc or Bcc additional numbers.
12. Press the Send
key to send this voice note.
Your phone sends the message. The message saves to the Outbox after it
successfully sends.
Inbox
The Inbox stores received messages. You can tell what kind of message was
received by the icon displayed. If the icon envelope is open then the message was
read, otherwise a closed envelope displays.
47
Inbox
The following types of messages may display in your inbox:
Voice note
Text messages
Picture messages
Push messages
When you enter the Inbox, the list of messages displays with the sender’s phone
numbers, or names, if available in your Phonebook. After you read the message, the
open envelope icon displays.
Tip: Press the Left or Right Navigation keys to scroll between Inbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Inbox option and press the Select soft key or the
Viewing a Text Message from the Inbox
1. Select a text message from the list and press the Options soft key.
The following options display:
key.
• Reply via: allows you to send a reply to the sender by sending a Text message,
Picture message, or Voice note.
• Call back: Places a call back to the number.
• Forward: allows you to forward the text message to another person.
• Delete: deletes the selected text message or multiple messages.
• Move to phone/SIM card: allows you to move the message from the SIM card
into the phone’s memory or from the phone onto the SIM card. Depends on
where the current message was saved.
• Sort by: allows you to sort messages by Read/Unread, Date, Name, Type, Size,
or Subject.
• Lock/Unlock: allows you to protect the message from deletion or unlock it for
deletion.
2. Press the View
key to read the message contents.
3. To scroll through the contents, press the Up or Down Navigation key.
Messages 48
Press the Options soft key while reading a text message to display the
following:
• Reply via: allows you to send a reply to the sender by sending a Text message,
Picture message, or Voice note.
• Call back: Places a call back to the number.
• Forward: allows you to forward the message to another number.
• Save address: allows you to extract the sender’s number and URL, e-mail
addresses or phone numbers from the message text, so that you can save them
in your phone’s memory.
• Delete: allows you to delete the message.
• Print via Bluetooth: allows you to print the message using a Bluetooth enabled
printer.
• Move to phone/SIM card: allows you to move the message from the SIM card
into the phone’s memory or from the phone onto the SIM card. Depends on
where the current message was saved.
• Lock/Unlock: allows you to protect the message from deletion or unlock it for
deletion.
Viewing a Picture Message from the Inbox
1. Highlight an unretrieved picture message
from the list and press the
View
key to view the message contents. The picture message
displays.
2. To scroll through the contents, press the Up or Down Navigation keys.
Press the Options soft key while viewing a picture and choose from the
following:
• Reply via: allows you to send a reply to the sender by sending a Picture
message, Text message, or Voice note.
• Reply all via: allows you to send a reply to the sender by sending a Picture
message or Voice note.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
• Replay: allows you to review the picture message.
• Save address: allows you to cut and paste the address to send a text
message, or picture message.
• Save media: allows you to save message media to your Image folder, Sound
folder, vCard, or vCalendar.
• Delete: deletes the selected picture message.
• Lock/Unlock: allows you to protect the message from deletion or unlock it for
deletion.
49
Inbox
• Properties: shows you information about the message, such as time and date
the message was received, the sender’s e-mail address or phone number,
recipient’s e-mail address or phone number, Cc, message size, priority, and
class.
Viewing a Picture Message When You Receive It
When a new picture message comes in, the display shows the Picture Messaging
Message icon.
1. Press the View soft key to view the message.
Press the Exit soft key if you want to view the message later in the Inbox.
2. Press the Options soft key or the
key to access the various options
described above.
3. Press the
key when you are finished.
Listening to a Voice Note from the Inbox
1. Select a Voice note
from the list and press the Play soft key to listen
to the message contents.
Press the Options soft key while listening to the message and choose
from the following:
• Reply via: allows you to send a reply to the sender by sending a Picture
message, Text message, or Voice note.
• Reply all via: allows you to send a reply to the sender by sending a Picture
message or Voice note.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
• Replay: allows you to review the picture message.
• Save address: allows you to cut and paste the address to send a text
message, or picture message.
• Save media: allows you to save message media to your Image folder, Sound
folder, vCard, or vCalendar.
• Delete: deletes the selected Voice note message.
• Lock/Unlock: allows you to protect the message from deletion or unlock it for
deletion.
• Properties: shows you information about the Voice note, such as date, from,
to, Cc, size, priority, and class.
Voice Note Options
1. Select a Voice note
display the following:
• Send to: allows you to send the Voice note.
from the list and press the Options soft key to
Messages 50
• Play: plays back your Voice note.
• Re-record: discards the previous Voice note and enables you to record a new
voice note.
• Set default destination: allows you to remove or edit the default destination.
• Set as: allows you to save the Voice note as a Ringtone, Caller ringtone, or
Alarm tone.
• Save: saves this recorded Voice note to the voice list.
Outbox
This message box stores unsent messages.
When you enter this menu, the list of messages in the Outbox displays with the
recipients’ phone numbers or names, if available in your Phonebook.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Outbox option and press the Select soft key or the
key.
Note: Press the Up or Down Navigation keys to scroll between Inbox, Outbox, and Drafts.
4. Select a message from the list and press the
key to view or play the
message contents.
5. To scroll through the contents, press the Up or Down Navigation keys.
Tip: Press the Options soft key while reading a message to select alternate options.
Drafts
This message box stores messages that you may want to edit or send at a later time.
When you enter this menu, the list of messages in the box displays.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Drafts option and press the Select soft key or the
Note: Press the Left or Right Navigation keys to scroll between Inbox, Outbox, and Drafts.
4. Select a message from the list and press the Options soft key.
key.
51
Templates
5. Highlight the Edit option and press the Select soft key or the
key to
edit the message contents.
6. Press the Send
key (while viewing the message) to send the
message.
Tip: Press the Options soft key while reading a message to select alternate options.
Templates
Besides entering message text using the keypad keys, you can speed message
composition by including copies of stored text (Templates) in your message.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the
key to enter the menu.
3. Highlight the Templates option and press the Select soft key or the
key. The following options are available:
• Text templates
• Picture message templates
Sending a Text template
4. Highlight the Text templates option and press the Select soft key or the
key.
5. Select a template from the Templates list and press the View
soft
key.
The template displays on the screen.
6. Press the Send
soft key and select one of the following options:
• Recent recipients: allows you to select a number or an address from the last
30 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
Phonebook.
• New number: allows you to manually enter a phone number or e-mail address.
7. After selecting a recipient, press the Send
soft key.
The template message sends to the select recipient(s).
Messages 52
Sending a Picture message template
1. Highlight the Picture message template option and press the Select soft
key or the
key.
2. Select a template from the Templates list and press the View
soft
key.
The template displays on the screen.
3. Press the Send
soft key and select one of the following options:
• Recent recipients: allows you to select a number or an address from the last
30 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your
Phonebook.
• New recipient: allows you to manually enter a phone number or e-mail
address.
• My Album: allows you to send the selected Picture template to My Album.
• My Journal: allows you to send the selected Picture template to My Journal.
4. After you select the recipient, My Album or My Journal, press the Send
soft key.
The template message sends to the select recipient(s), or selected
destination.
Voice mail
This menu provides you with a way of accessing your voice mailbox, if provided by
your network.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Voice mail option and press the Select soft key or the
key.
Note: Before you can use the Voice Mail feature, you must obtain the voice server number from T-Mobile
customer service.
4. Select Call voice mail and press the Select soft key or the
key.
Tip: In Idle mode you can also press and hold the
key to connect to the voice server.
53
Delete all
- Or -
5. Select Voice server number to change the voice mail server number,
if necessary.
Note: Voice mail is a network feature. Please contact T-Mobile customer service for further details.
Delete all
This menu allows you to delete all of the messages in each message box. Or, you
can also delete all of your messages in all message boxes at one time.
Important!: Once messages are deleted, they cannot be recovered.
1. Press the Up or Down Navigation key to select a message box to clear. To
delete all of your messages, select the All option.
2. Press the
key to place or remove a check mark.
3. Press the Delete soft key to delete the marked objects.
4. After you receive the Delete? confirmation, press the Yes soft key to delete
or press the No soft key to cancel.
Settings
In this menu, you can set up a default text message, or picture message. The last
setting you accessed is automatically activated for sending subsequent messages.
Text messages
• Service center: allows you to store or change the number of your message center,
which is required when sending messages. You must obtain this number from
T-Mobile customer service.
• Destination address: allows you to enter a number that you would like to send all
messages to. You can still message others, but this number always displays in the
Recipient list.
• Validity period: allows you to set the length of time your text messages are stored
at the message center while attempts are made to deliver them.
• Reply path: allows the recipient of your message to send you a reply message
using your message center, if your network supports this service.
• Delivery report: allows you to activate or deactivate the report function. When this
function is activated, the network informs you whether or not your message was
delivered.
Messages 54
Picture message
Use the following options to set Send and Receive settings for Picture messages.
Send Settings
• Delivery report: when this option is enabled, the network informs you whether or
not your message was delivered.
• Read reply: when this option is enabled, your phone sends a request for a reply
along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiration: set the length of time your messages are stored in the message center
while the network attempts to deliver them.
• Delivery after: you can set a delay time before the phone sends your messages.
Receive Settings
• Anonymous reject: you can set your phone to automatically reject anonymous
messages.
• Ads allowed: you can set your phone to automatically receive advertising
messages.
• Report allowed: you can set the option to receive a delivery report.
Broadcast Messages (SIM Card Dependent)
This network service allows you to receive text messages on various topics, such as
the weather or traffic.
ᮣ
Please contact T-Mobile's customer service center for further details.
Reading New Broadcast Messages
This options allows you to read broadcast messages from the Archive or Temporary
folders.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
3. Highlight the Broadcast messages option and press the Select soft key or
the key.
4. Select the Read option and press the Select soft key or the
key to enter the menu.
key.
5. Select Archive to read the Broadcast messages that were archived.
6. Select Temporary to read the temporary Boadcast messages.
55
Broadcast Messages (SIM Card Dependent)
Receiving options
This option allows you to determine whether to receive or reject Broadcast
messages.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
3. Highlight the Broadcast messages option and press the Select soft key or
the key.
key to enter the menu.
4. Select the Receive option and press the Select soft key or the
key.
5. Highlight the On option and press the Save soft key to confirm your
selection.
Channel options
This option allows you to select whether you want Broadcast messages received for
all or respective channels.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the
3. Highlight the Broadcast messages option and press the Select soft key or
the key.
4. Select the Channel option and press the Select soft key or the
5. Highlight All channels to receive Broadcast messages on all channels and
press the Select soft key or the key.
6. Highlight Respective channels to receive Broadcast messages on only
selected channels and press the Select soft key or the key.
Language options
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Messages icon. Press the Select
soft key or the key to enter the menu.
3. Highlight the Broadcast messages option and press the Select soft key or
the key.
4. Select the Language option and press the Select soft key or the
key to enter the menu.
key.
key.
5. Highilight the language you want the broadcast messages to receive in and
press the OK soft key.
Messages 56
A check mark displays beside the selected language(s) to indicate their
selection.
- Or -
6. Press the All option to receive broadcast messages in all languages.
Memory Status
You can view the amount of the allocated memory and the memory available for
picture messages.
The display shows the total space including the used and free space. You can also
view how much space and the number of messages currently occupying each
message box type:
• Text Message (saved on the phone)
-
Inbox
-
Outbox
Draft
-
• Text Message (saved on the SIM card)
• Picture message
-
Inbox
-
Outbox
-
-
Draft
Template
• E-mail
• Push messages
Instant Messaging (IM)
Instant Messaging is a way of sending short, simple messages that are delivered
real time to users online.
Before using this feature, you need to subscribe to a messenger service. Your
handset has 4 pre-loaded Messaging services (AIM, ICQ, Windows Live, and Yahoo!).
Note: Contact T-Mobile customer service for further details.
57
Instant Messaging (IM)
Starting your Instant Messaging
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the IM and E-mail icon. Press the
Select soft key or the
3. Highlight IM and press the Select soft key or the
4. Highlight the messenger service to which you are subscribed using the Up
or Down Navigation key and press the Select soft key or the key.
5. Highlight the Sign on, Connect, or Sign in option, depending on your
messenger service and press the Select soft key or the key.
key to enter the menu.
key.
6. Enter the required sign on information such as ID and password, then
press the Down Navigation key.
Note: The information required for sign on varies depending on the Instant Messaging provider you use.
7. Fill in all the appropriate fields and press the Sign in soft key or the
key.
8. If you use Windows Live, agree to the terms and conditions of use for this
service and press the I agree soft key or the
key.
9. Follow the on-screen instructions to read, reply to, compose, send, and
manage your Instant Messaging account.
Using the Instant Messenger Options
After selecting an Instant Messaging service, the following options display:
• Sign on/Connect/Sign in: allows you to login to your Instant Messaging account.
• Saved conversations: displays permanent records of your Instant Messaging
conversations.
• Offline conversations: shows a listing of the last 10 IM conversations made while
you were offline.
• Preferences: Allows you to Sign in, empty Saved conversations, add or delete
Favorite IDs, turn Power on Sign in On or Off, turn Automatic sign-in On or Off, and
adjust the sound settings for New IM, Alert, System message, and Repitition.
• Help: provides helpful information about IM providers such as: Sign up, Sign on,
Buddies, Sending IMs, Receiving IMs, Privacy, and Away.
Messages 58
Section 7: Understanding Your Phonebook
Topics Covered
•
•
•
•
•
•
•
•
•
This section explains how to use and manage your Phonebook.
Using Contacts List
Use the following procedures to store a new contact to your Phone.
Storing a Number in the Phone’s Memory
The default storage location for saving phone numbers to your phonebook is your
phone’s built-in memory. The first time you use the Phonebook feature your phone
prompt’s with the following “Would you like to store a copy of your contacts on
My.T-Mobile.com so you can view and manage your contacts online?” Responding
with Yes copies the information stored on your SIM card to your phone’s memory and
then synchronizes with T-Mobile’s network. After the intial use of this feature,
additional, new contact information stores directly to the phone’s memory and
synchorizes with T-Mobile’s network during predetermined, timed intervals.
1. In Idle mode, press the Ph.Book soft key.
2. Scroll to Add new contact by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
59
Finding a Phonebook Entry
3. Enter a first name in the First Name text box. Press the Down key to tab to
the next text box.
For further details about how to enter characters, see "Using ABC Mode"
on page 38.
4. Enter a last name in the Last Name text box.
5. Highlight a number Type by pressing the Up or Down Navigation key, then
enter a number in the text box.
The following types are available:
• Mobile: assigns the number to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Work entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the entry.
• E-mail: allows you to enter the e-mail address for the contact.
• Picture ID: allows you to add a Picture ID assigned to the contact.
• Ringtone: allows you to assign a Ringtone by choosing from one of the following
locations: Default melodies, Voice list, Sounds, Music or Do not assign (no
ringtone assigned to entry).
• Group: allows you to assign this contact to a group.
• Notes: allows you to enter additional information about the contact.
Up to 50 characters are allowed.
6. Press the Options soft key and highlight the Save option and press the
Select soft key or the
destination and the new contact information displays.
7. Press the key to return to Idle mode.
key. The number saves to your selected
Finding a Phonebook Entry
You can store phone numbers and their corresponding names in the phone’s built-in
memory (the Phonebook).
1. In Idle mode, press the Ph.Book soft key.
2. Highlight Contact list and press the Select soft key or the
key.
Note: A Phone icon displays to the left of the entry.
3. Enter the first few letters of the name in the text box.
The Phonebook entries are listed, starting with the first entry matching
your input.
Understanding Your Phonebook 60
4. If needed, press the Up or Down Navigation key until the entry you want is
highlighted.
5. Once you locate the entry, press the
key to dial the number, or
press the Options soft key to access the following Phonebook entry
options:
• View: shows details of the Phonebook entry.
• Edit: allows you to edit the Name and number for the selected contact.
• Send message: allows you to send a message to the selected number. You
may choose between Text message, Picture message, or Voice note.
• New contact: takes you to the Add new contact menu.
• Call: places the call to the selected phone number.
• Copy to phone/SIM: copies the selected or all of the contacts to the phone or
SIM card. Depends on where the contact was previously saved.
• Assign speed dial: allows you to assign a speed dial key number to the
selected Phonebook entry.
• Send name card via: allows you to send your name card via Text message or
Picture message.
• Delete: allows you to delete the selected name and number from your
Phonebook or delete all numbers. You are asked to confirm your name and
number deletion by pressing the Yes soft key. To cancel, press the No soft key.
• Select language: allows you to select between English, Français, and Español.
6. If you selected the View option from the above listing, press the Options
soft key after the contact information displays, for these additional options:
• Edit: allows you to edit the name and number fields in the entry. You can also
add an e-mail address and notes.
• Send message: allows you to send a message to the selected number. You
may choose between Text message, Picture message, or Voice note.
• Call: places the call to the selected phone number.
• Copy to phone/SIM: copies the selected or all of the contacts to the phone or
SIM card. Depends on where the contact was previously saved.
• Assign speed dial: allows you to assign a speed dial key number to the
selected Phonebook entry.
• Send name card via: allows you to send your name card via Text message or
Picture message.
• Delete: allows you to delete the selected name and number from your
Phonebook or delete all numbers. You are then asked to confirm the name and
number deletion by pressing the Yes soft key. Press the No soft key to cancel
the deletion.
61
Dialing a Number from Phonebook
• Add to block list: adds the selected contact to block (call) list.
• Print via Bluetooth: sends the contents of the selected text message to a
Bluetooth enabled printer.
Dialing a Number from Phonebook
Once you store phone numbers in the Phonebook, you can dial them easily and
quickly by using the location numbers assigned to them and listed in the Phonebook.
Note: If you cannot remember a location number, you must go into the Contact list menu in the
Adding a New Caller Group
1. In Idle mode, press the Ph.Book soft key.
2. Highlight the Groups option and press the Select soft key or the
3. Press the Options soft key and select the Add new group option.
4. Enter a name for the new group in the Name field.
key.
5. Highlight the Picture ID field and press the
key to create a Picture ID
for this new caller group. Select from one of the following options:
• Take picture: allows you to take a picture to use as a Caller ID photo.
• Photos: displays a list of photos from which to select as a Caller ID.
• Downloaded images: displays a list of downloaded images from which to
select as a Caller ID.
• Icons: displays a list of predefined Caller ID icons. Press the Right and Left
Navigation key to display pages of icons from which to choose.
6. Highlight the Ringtone field and press the
key to create a rington for
this new caller group. Select from one of the following options:
• Default melodies: displays a list of default melodies from which to select
as a ringtone.
• Voice list: displays a list of voice messages from which to select as a ringtone.
• Sounds: displays a list of sounds from which to select as a ringtone.
• Music: displays a list of music from which to select as a ringtone.
7. Press the Options soft key and select the Save option.
Understanding Your Phonebook 62
Editing a Caller Group
1. In Idle mode, press the Ph.Book soft key.
2. Highlight the Groups option and press the Select soft key or the
key.
3. Scroll through the group list by pressing the Up or Down Navigation key.
4. Highlight the group you want and press the Options soft key.
5. Highlight the Edit option and press the Select soft key or the
key.
6. To edit the Caller group name, modify the text in the Name text box.
7. To change the image associated with the Caller group, press the Down
navigation key to highlight the Picture ID icon. Press the
key.
The following options are available:
• Take Picture: allows you to take a picture with your camera.
• Photos: allows you to choose a photo from Photos folder.
• Downloaded images: allows you to choose a photo from your Downloaded
images folder.
• Icons: allows you to choose from pre-defined icons.
8. To change the ringtone associated with the Caller group, press the Down
key to highlight the Ringtone icon. Press the
key.
The following options are available:
• Default melodies: allows you to choose between 11 different melodies.
• Voice list: allows you to assign a voice clip to this group.
• Sounds: allows you to choose a sound from your Sounds folder.
• Music: allows you to choose music from Music folder.
9. Press the Save soft key when you are finished. Your Caller group
settings save.
10. Press the
key to return to Idle mode.
Speed Dialing
Once you store phone numbers from your Phonebook list, you can set up to 8 speed
dial entries and then easily dial them whenever you want, by pressing the associated
numeric key.
ᮣ
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press
and hold the appropriate key.
63
My Profile
Setting Up Speed Dial Entries
1. In Idle mode, press the Ph.Book soft key.
2. Scroll to Speed dial by pressing the Up or Down Navigation key and press
the Select soft key or the key.
3. Use the Up or Down Navigation key to select the keypad number key to
where you wish to assign the new speed-dialing number and press the
Add soft key or the
key.
• Select from the 2 to 9 keys, and press the Add soft key.
4. Highlight a contact entry number from the list and press the Select soft key
or the
key.
5. You receive a Saved confirmation and the Speed dial menu displays the
number assigned to the number key you selected.
6. Press the
key to return to Idle mode.
Note: Memory location 1 is reserved for your Voice mail server number and this speed dial location can not
be changed. The voice server number can be altered via the Messages > Voice mail > Voice
server number menu.
My Profile
My Profile allows you to create a virtual business card. Once completed, you can
send the card to recipients as a V-card attachment.
Note: As with any profile, your profile can be associated with a group.
1. In Idle mode, press the Down key to display the Contact list.
My profile is listed at the top of the contact list and displays the name of
the associated group (if applicable).
2. Press the
key.
3. Press the Options soft key and select Edit.
4. Fill in the desired fields.
5. Press the Options soft key, highlight Save and press the Select soft key or
the
key.
Understanding Your Phonebook 64
Block list
The Block list menu allows you to add or remove contacts from the blocked list of
callers.
Creating a Block list
1. In Idle mode, press the Ph.Book soft key.
2. Highlight Block list and press the Select soft key or the
key.
3. Press the Options soft key, select the Add new option and press the Right
Navigation key.
4. Select one of the following options:
• Number: allows you to block the number you enter.
• Contacts: allows you to select contacts from the Contact list to block.
• Group: allows you to block an entire Group.
• FDN contacts: allows you to identify FDN contacts to block.
• Recent contacts: allows you to select a recent contact from the Recent
contacts list to block.
• Unknown numbers: adds all unrecognized numbers (numbers not in the
Phonebook or on the FDN list) to the block list.
The selected contact(s) display and are added to the Block list.
Removing contacts from the Block list
1. In Idle mode, press the Ph.Book soft key.
2. Highlight Block list and press the Select soft key or the
key.
3. Press the Options soft key, select the Remove option and press the Right
Navigation key.
4. Select the Selected or All option and press the Select soft key or the
key.
The selected contact(s) are removed from the Block list.
Management
The Management menu allows you to select where your contacts are saved, delete
your contacts, sort by contacts, or check your memory status.
65
Management
Default saving
The Default saving option allows you to choose where your contacts are saved. The
following options are available:
• Phone: new phonebook contacts are saved to your phone. Your phone comes with
the default set to Phone.
• SIM card: new phonebook contacts are saved to your SIM card.
• Ask on saving: you are prompted to choose between Phone or SIM Card whenever
you save a new contact.
Copying all Phonebook Entries
You can copy all Phonebook entries to the SIM card.
Note: When storing an Address Book entry on the SIM card, only the Name, Address, and slot location are
saved.
1. In Idle mode, press the Ph.Book soft key.
2. Highlight Management and press the Select soft key or the
key.
3. Scroll to the Copy all to option and press the Select soft key or the
key.
4. Highlight SIM card and press the Select soft key or the
Sort by contacts
key.
The Sort by contacts menu option allows you to set the sort function to alphabetize
the contacts by First name or Last name.
Delete all
Important!: Once contact entries are deleted, they cannot be recovered.
This option allows you to delete all your contacts from the Phonebook.
Deleting all of the Phonebook Entries
Perform the following procedure to delete all your entries from your phone’s
memory.
Important!: Once Phonebook entries are deleted, they cannot be recovered.
1. In Idle mode, press the Ph.Book soft key.
2. Highlight Management and press the Select soft key or the
key.
Understanding Your Phonebook 66
3. Scroll to Delete all by pressing the Up or Down Navigation key and press
the Select soft key or the key.
4. When the Delete? confirmation message displays, press the Yes soft key
or the key.
5. Press the No soft key to cancel.
6. Press the back key or the
key to return to Idle mode.
Memory status
You can check how many names and numbers are stored in the Phonebook, within
both the Phone, the FDN. You can also see the current storage capacity of the
memory.
1. In Idle mode, press the Ph.Book soft key.
2. Highlight Management and press the Select soft key or the
3. Select the Memory status option by pressing the Up or Down Navigation
key and press the Select soft key or the key.
key or the Back soft key when you are finished.
key.
4. Press the
Own number
This function is a memory aid, which you can use to edit or remove your own phone
number. You can also edit the default name assigned to your phone number.
1. In Idle mode, press the Ph.Book soft key.
2. Highlight Own number and press the Select soft key or the
key.
3. Press the
key. The cursor displays in the Name field.
key and type in a new name if desired.
4. Press the
5. Press the Down Navigation, press the
key and type in a new
number if desired.
6. Press the Save soft key when finished.
67
FDN List
FDN List
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The FDN List allows you to set up a list of numbers that your phone may dial.
FDN mode must first be enabled in the Security settings. For more information on
To enable FDN mode, a PIN2 number is required. You can obtain your PIN2 from
T-Mobile customer service.
1. In Idle mode, press the Ph.Book soft key.
2. Select the FDN list option by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
3. Enter the phone number into the list:
• Press the Options soft key, and select Add or press the
key.
• Enter the PIN2 number obtained from T-Mobile’s customer service center and
create your restricted phone list.
Understanding Your Phonebook 68
Section 8: t-zones
Topics Covered
•
•
Help
This section outlines the t-zones features available on your phone. For more
information, contact T-Mobile.
t-zones
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
provides you wireless access and navigation to the Web using your phone.
Tip: Press the t-zones key
while in Idle mode to bypass the t-zones menu.
To access t-zones via the menu, follow these steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the t-zones icon. Press the Select soft
key or the
To access t-zones directly, follow these steps:
In Idle mode, press the t-zones soft key to access the t-zones menu.
key to enter the menu.
ᮣ
The following options are available:
Home
Selecting this menu connects the phone to the network and loads the t-zones
homepage.
The content of the t-zones startup homepage depends on your Wireless Web service
provider. To scroll through the screen, use the Up and Down keys.
To go to the startup homepage from any other screen in the t-zones, use the Home
Exiting the t-zones
ᮣ
To exit the browser at any time, simply press the
key.
69
t-zones
Navigating the t-zones
1. To scroll through browser items, press the Up or Down Navigation key.
2. To select browser items, press the key.
3. To return to the previous page, press the Back soft key or the
4. To return to the startup homepage, press the Home soft key.
Entering Text in the t-zones
key.
When you are prompted to enter text, the currently active text input mode is
indicated on the screen. The following modes are available:
• Upper-case character mode (A): allows you to enter upper-case English
characters.
• Lower-case character mode (a): allows you to enter lower-case English
characters.
Tip: Press the
key to enter symbols in upper-case or lower-case character mode.
• Number mode (1): allows you to enter numbers.
To change the text input mode, use the following procedures:
1. Press the Right soft key one or more times.
2. To enter a space, press the
3. To edit text, set the cursor to the right of the character(s) to be corrected.
4. Press the key as required.
key.
5. Enter the correct character(s).
Selecting and Using Menu Options
Various menus are available when you are using t-zones to navigate the
Wireless Web.
To access the browser options menu:
1. Press the Menu soft key.
Note: The menus may vary, depending on your version of t-zones.
t-zones 70
The following options are available:
• Go to URL: allows you to manually enter the URL address of a Web page. After
entering an address, press the
key to go there directly.
• Bookmarks: shows the bookmarks list. You can bookmark the current web page or
access previously bookmarked pages.
• Messages: allows you to create a text message or check your My Messages folder.
• My files: allows you to go to your Files folders.
• Home: takes you back at any time to the home page of the Wireless Web service
provider.
• Back: takes you back to the previous web browser screen.
• Show URL: displays the URL address of the Web page to which you are currently
connected. It also enables you to set the current site as the startup home page.
• Reload: reloads the current page.
Enter URL
This menu allows you to manually enter the URL address of a web site that you wish
to access.
Bookmarks
This menu stores up to 50 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key or the
key.
2. Enter a name for the favorite item in the Name text box and press the
Down key.
3. Enter the address in the URL text box and press the Options soft key.
4. Highlight the Save option and press the Select soft key or the
key.
5. Highlight an item after saving favorite items, then press the Options soft
key to access the following:
• Open: navigates to the site.
• Edit: allows you to edit the address.
• Delete: allows you to delete the address.
71
Help
-Or-
6. Select the favorite item and press the
key. Your browser displays the
site.
Clear Cache
You can clear the information stored in the cache, which is the phone’s temporary
memory and stores the most recently accessed Web pages.
ᮣ
Press the Yes soft key to confirm the deletion. Otherwise, press the No soft
key.
Help
Help is designed to work with t-zones to show you some of the unique features of
your phone.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Help icon. Press the Select soft key
or the
key.
3. The T-Mobile Help menu displays with the following options available:
• Browse Help Topics: this option gives you a list of different topics from which
you can select.
• Enter a Search: this option allows you to search based on a keyword.
• My Account: this option provides you with account specific information such as
your current activity, Bill Summary, Plan & Services, Voicemail Settings, Find a
Retail Store, and FAQ’s & Info.
• About: this option offers general information about T-Mobile Help including
concept and site design, copyright information, and contact e-mail address.
To access the browser options menu:
ᮣ
Press the Options soft key.
- Or -
Highlight the Openwave icon at the top left of the page by pressing the
Up or Down keys and then pressing the
key.
Note: The menus may vary, depending on your t-zones subscription.
t-zones 72
Section 9: Fun & Apps
Topics Covered
•
•
•
•
•
•
Games
This section outlines the various applications that are available on your phone.
Files
Files allows you to manage your sounds and images and view your memory status in
one convenient location.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
3. Highlight the Files option and press the Select soft key or the
Sounds
key to enter the menu.
key.
In this menu, you can view the list of sounds downloaded from the web server or
received in picture messages. You can also set a downloaded sound as the current
ring tone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
key.
key.
4. Highlight the Sounds option and press the Select soft key or the
Note: When downloading MegaTones® or HiFi RingersTM, charges may apply.
73
Files
The following options are available:
Browse MegaTones
Using the Browse MegaTones option on the sounds list, you can quickly access the
T-Mobile website and download new sounds by using the t-zone browser. Press the
Select soft key to purchase additional MegaTones.
Browse HiFi Ringers
Using the Browse HiFi Ringers option on the sounds list, you can quickly access
T-Mobile website and use the t-zone browser to download new HiFi Ringers.
Press the Select soft key to purchase additional ringtones.
Sounds
Highlight an item in the Sounds menu and press the Options soft key. The following
options are available:
• Download new: opens your web browser where you can download new sounds.
• Send via: allows you to send the sound file as a Picture message, E-mail or to
another Bluetooth compatible device.
• Set as: allows you to set the sound as your ring tone, a Rintone, Caller ringtone, or
an alarm tone.
• Delete: allows you to delete the selected sound or multiple sounds.
• Move to memory card: allows you to move the Selected or Multiple sound(s) to
the Memory card.
• Copy to memory card: allows you to copy the Selected or Multiple sound(s) to the
Memory card.
• Rename: allows you to change the name of the sound.
• Bluetooth visibility: allows you to select one or multiple sounds to share with
other Bluetooth devices.
• Lock/Unlock: allows you to lock the sound to protect it from deletion or unlock it
to allow deletion.
• Properties: displays the sound name, date, format, length, size, and Lock/Unlock
status.
Voice list
The Voice list contains your recorded audio messages. Highlight an item and press
the Options soft key. The following options are available:
• Send via: allows you to send the audio message via a Picture message.
• Set as: allows you to set this audio message as a Ringtone, Caller ringtone, or an
Alarm tone.
Fun & Apps 74
• Delete: allows you to delete the selected audio message or multiple audio
messages.
• Move to memory card: allows you to move the Selected or Multiple sound(s) to
the Memory card.
• Copy to memory card: allows you to copy the Selected or Multiple sound(s) to the
Memory card.
• Rename: allows you to change the name of the audio message.
• Bluetooth visibility: allows you to select one or multiple voice messages to share
with other Bluetooth devices.
• Lock/Unlock: allows you to lock the audio message to protect it from deletion or
unlocks it to allow deletion.
• Properties: displays the audio name, date, format, length, size, and Lock/Unlock
status.
Memory card
In this menu you can view and manage the images, videos, music, sounds, and
Other files stored on your memory card. Highlight an item and press the Options soft
key. The following options are available:
• Open: allows you to open the selected folder.
• Create folder: allows you to create a new folder.
• Bluetooth visibility: allows you to share all the data on the memory card.
• Properties: allows you to view the details of the selected file or folder such as
Name, Size, Contains, Created time, and Last modified time.
• Memory card info.: allows you to view the Capacity, Used space, and Free space
on the memory card.
Images
In this menu, you can view the list of images downloaded from the web server, taken
with the built-in camera, or received in messages. You can set an image as the
current background image.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
key.
key.
4. Highlight the Images option and press the Select soft key or the
75
Files
The following options are available:
Browse Wallpapers
Using the Browse Wallpapers option, allows you to access the T-Mobile website
and download new images using the t-zone browser.
ᮣ
Highlight the Browse Wallpapers option and press the
key.
Note: When downloading Wallpapers, charges may apply.
Default wallpapers
Using the Default wallpapers option you can choose from a list of wallpapers
included with your phone.
Downloaded images
Using the Downloaded images option you can choose a photo from your
downloaded images foler.
Memory card
From the Memory card you can choose an image file that is stored.
Photos
Using the Photos option you can view your photos.
To change the background image:
1. Press the Navigation keys to scroll through the list.
2. Make a selection and press the Options soft key.
3. Highlight Set as, press the Right Navigation key and select Wallpaper.
4. Press the Select soft key or the
key.
Your wallpaper selection updates.
Photos Options
While viewing a photo, press the Options soft key to choose from the
ᮣ
following options:
• View: allows you to view the selected photo.
• Send to My Album: allows you to send your photos to My Album.
• Send via: allows you to send the photo as a Picture message, E-mail or to
another Bluetooth compatible device.
• Set as: allows you to set the photo as your Wallpaper or as a Caller ID.
• Delete: allows you to delete the selected photo or multiple photos.
Fun & Apps 76
• Default destination: allows you to Remove or Change where your photos are
sent after you take them.
• Move to memory card: allows you to move the Selected or Multiple sound(s)
to the Memory card.
• Copy to memory card: allows you to copy the Selected or Multiple sound(s)
to the Memory card.
• Edit image: allows you to choose a new photograph for an outgoing message.
• Rename: allows you to rename the photo.
• Slide show: allows you to set the time for the slide show to cycle through the
images. Choose 1 second or 3 seconds.
• Bluetooth visibility: allows you to select one or multiple sounds to share with
other Bluetooth devices.
• Print via Bluetooth: sends the selected photo to a Bluetooth enabled device.
• Lock/Unlock: allows you to lock the photo to protect it from deletion or unlocks
it to allow deletion.
• Properties: displays the image name, date, format, resolution, size, and
Lock/Unlock.
My Album
My Album is a private online picture album that you can use to store and share
Use the following procedures to access My Album.
Note: When accessing My Album, charges may apply.
1. In your t-zone browser, select the My Albums Menu link and press the
Select soft key or the
key.
2. Photos sent to this folder are stored in the Inbox Album.
3. Use the Up or Down key to highlight a particular image and press the
key to view the photos.
4. Press the
My Journal
key to exit t-zones and return to the Idle screen.
Use a web browser to make notes in My Journal, your online diary and Weblog.
Keep it private to store your personal memories and send e-mail invitations to ask
people to view and comment on your album. See your service provider for more
77
Files
Note: When making notes on My Journal, charges may apply.
Downloaded images
This menu allows you to access your downloaded images on your phone or on the
memory card.
ᮣ
Scroll to the image you want to view and press the Options soft key to
access the following options:
• Download new: opens your web browser where you can download new
images.
• View: displays the image.
• Send via: allows you to send an image via a Picture message, e-mail or to a
Bluetooth enabled device.
• Set as: allows you to set the image as Wallpaper or as a Caller ID.
• Delete: allows you to delete the selected image or multiple images.
• Move to memory card: allows you to move the Selected or Multiple image(s)
to the Memory card.
• Copy to memory card: allows you to copy the Selected or Multiple image(s)
to the Memory card.
• Rename: allows you to change the name of the image.
• Display mode: allows you to set the display mode to Line view or Thumbnail
view.
• Slide show: allows you to set the time for the slide show to cycle through the
images. Choose 1 second or 3 seconds.
• Bluetooth visibility: allows you to select one or multiple images to share with
other Bluetooth devices.
• Print via Bluetooth: allows you to send the selected image to a Bluetooth
enabled device.
• Lock/Unlock: allows you to lock the image to protect it from deletion or unlock
it to allow deletion.
• Properties: displays the image name, date, format, resolution, size, quality,
and Lock/Unlock.
Icons
This menu allows you to personalize your favorite numbers with downloadable icon
types.
• myFaves icons displays a list of downloaded icon types for you to use.
• Browse myFaves icons navigates to the t-zones so you can download additional
myFaves icon types.
Fun & Apps 78
Videos
This menu allows you to access your saved videos.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Files option and press the Select soft key or the
key.
4. Highlight the Videos option, press the Right Navigation key and select one
fo the following:
• Downloaded videos: displays a list of downloaded videos.
• Videos: displays a list of videos stored in your Videos folder.
• Memory card: displays a list of folders on your memory card.
Music
In this menu you can review the Music you’ve downloaded or you can view music
stored on the memory card.
1. Highlight Music or Memory card and press the Select soft key or the
key.
2. Select a music file and press the Options soft key to choose from the
following options:
• Play via bluetooth: allows you to play the selected music file on a Bluetooth
device.
• Send via bluetooth: allows you to send the selected music file to a Bluetooth
enabled device.
• Set as: allows you to set the music file as a Ringtone, Caller ringtone, or
Alarm tone.
• Delete: allows you to delete the selected music file or multiple music files.
• Move to memory card: allows you to move the Selected or Multiple music
files to the Memory card.
• Copy to memory card: allows you to copy the Selected or Multiple music files
to the Memory card.
• Rename: allows you to change the name of the music file.
• Bluetooth visibility: allows you to select one or multiple music files to share
with other Bluetooth devices.
• Lock/Unlock: allows you to lock the music file to protect it from deletion or
unlocks it to allow deletion.
• Properties: displays the properties for the selected music file such as name,
date, format, bitrate, length, size, and lock/unlock. Properties displayed depend
on the format of the music file.
79
Files
Other files
In this menu you can view or store other types of files without corruption, various
document files and files stored in the phone’s memory, or on a memory card.
Available file formats are Microsoft Word, Adobe PDF, or Plain text.
ᮣ
Highlight a file and press the Options soft key to choose from the following
options:
• Send via: allows you to send an image via a Picture message, e-mail or to a
Bluetooth enabled device.
• Delete: allows you to delete the selected music file or multiple music files.
• Move to memory card: allows you to move the selected file or multiple files to
the Memory card.
• Copy to memory card: allows you to copy the selected file or multiple files to
the Memory card.
• Rename: allows you to change the name of the selected file.
• Bluetooth visibility: allows you to select one or multiple music files to share
with other Bluetooth devices.
• Lock/Unlock: allows you to lock the file to protect it from deletion or unlocks it
to allow deletion.
• Properties: displays the Name, Date, Format, Size, and Lock/Unlock status for
the selected file.
Memory card
In this menu you can view and manage the images, videos, music, sounds, and
Other files stored on your memory card. Highlight an item and press the Options soft
key. The following options are available:
• Open: allows you to open the selected folder.
• Create folder: allows you to create a new folder.
• Bluetooth visibility: allows you to share all the data on the memory card.
• Properties: allows you to view the details of the selected file or folder such as
Name, Size, Contains, Created time, and Last modified time.
• Memory card info.: allows you to view the Capacity, Used space, and Free space
on the memory card.
Memory Status
You can check the amount of memory being used and memory remaining for
Fun & Apps, Sounds, Images, Videos, Music, Games, Other files, or Memory card.
ᮣ
Press the Left or Right navigation keys to scroll between the memory
status of Fun & Apps, Sounds, Images, Videos, Music, Games, Other files,
or Memory card.
Fun & Apps 80
Games
You can download MIDlets (Java applications that run on mobile phones) from
various sources using t-zones browser and then storing them in your phone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight the Games option and press the Select soft key or the
key.
When you access the Games menu, the list of default games displays. Once you
download new games, they are then added to the list.
Browse Games
You can download more games from the T-Mobile website by using the Browse
Games option.
ᮣ
Highlight the Browse Games option and press the Connect soft key or the
key.
The t-zones screen displays with options.
Note: When downloading games, charges may apply. MIDlet game options differ depending on the MIDlet
selected.
MIDlet Options
1. In the Games Menu, scroll to the MIDlet application you want and press
the Options soft key.
The following options are available:
• Start: starts the MIDlet.
• Details: shows information about the MIDlet, such as file size, application
version, and vendor.
• Lock/Unlock: allows you to lock the game to protect it from deletion or unlock it
to allow deletion.
• Move to: allows you to move the Selected or Multiple midlets to the
Memory card.
• Delete: allows you to delete a MIDlet.
• Memory status: Shows you how much memory is left for your games.
2. To exit and return to the Games list, press the Back soft key or the
key.
81
Music Player
Music Player
You can add music files, or play music stored in your playlist.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
3. Highlight Music player and press the Select soft key or the
key.
key.
4. Press the Options soft key and select one of the following options:
• Add music from: allows you to add a music file stored on the Phone or on the
Memory card.
• Open playlist: allows you to either access the entire My Playlist folder
(containing up to four playlists), or launch the Current playlist.
• Settings: changes the music player settings for the Repeat mode, Shuffle,
Visualization, and Volume.
-
Repeat mode: replays the entries in a selected playlist. Options include: Off,
One (repeats the current music file until this option is disabled), or All (continually
plays the music files listed in the curent playlist (in sequence) until this option is
disabled).
-
-
-
Shuffle: randomly play songs from a selected playlist. Options include: On
(enable this feature), or Off (disable this feature).
Visualization: changes the visual display on the music player’s main screen.
Options include: Type1 or Type2.
Volume: changes the music player’s volume level. Options are: Mute, or 0-14.
• Shortcuts: displays the available shortcut keys for the music player. Use this
screen as a reference for keypad functionality:
Up Navigation key directly accesses the Current playlist.
Down Navigation key stops the playback of the
music file.
begins playback at the beginning of the currently
selected music file.
changes the visual display on the music player’s
main screen.
Fun & Apps 82
toggles the music player’s Shuffle feature: On (enable this
feature), or Off (disable this feature).
displays the Music player menu options.
returns to the previous menu or function.
5. Press the Back soft key or the
Camera
key to exit and return to Idle mode.
Voice recognition
Using the VoiceSignal, voice recognition software you can dial phone numbers,
lookup contacts, and open other applications with voice commands.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, say a command.
Note: A list of voice commands briefly displays.
Voice Recognition Commands
• Call: dials a name from your contact list, or dials a number, even if the number is
not stored in the contact list. For more information, refer to "Contacts List Voice
Activation" on page 84.
• Lookup: allows you use a voice command to locate and display contact
• Go to: accesses the Voice Memo, Calendar, and Contacts List features of your
phone. (See ‘Voice Memo” on page 38, ‘Calendar” on page 126, and ‘Your
Contacts List” on page 53 for more information.)
• Check: Lets you check your phone's status (that is, network coverage, signal
strength, and battery in the same report), network coverage, signal strength,
battery, and phone number.
83
Voice recognition
Speak clearly when giving your command. If, after a few seconds, the handset does
not recognize your command, a voice prompt asks you to repeat the command. If the
software does not recognize your command the following message displays “Sorry,
no match found,” and voice recognition turns off.
Important!: You must end your current VoiceSignal call before you can make another call.
Voice Recognition Tips
• Wait for the tone before you speak.
• Speak clearly and at a normal volume.
Contacts List Voice Activation
On startup VoiceSignal reads your Contacts list and voice-activates all the names.
When you have add or change contacts, VoiceSignal automatically reloads and
voice-activates the list when you add or modify a contact.
Voice Recognition Settings
Choice lists
VoiceSignal uses choice lists when a name or number is not clearly recognized. The
software displays three choices and prompts you to select a choice.
You can modify the way VoiceSignal uses the choice lists in the settings. Each time
VoiceSignal activates you can choose to view the choice list even if there is only one
choice. Additionally, you can choose never to view a choice list, even if there are
multiple choices. When the name or number you speak is not recognized, the
Automatic setting displays the choice list.
Choice list options
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
Fun & Apps 84
4. At the voice prompt, press the Settings soft key and select one of the
following:
• Choice lists
-
-
-
Automatic: VoiceSignal displays a choice list only when it is not sure if it has
correctly recognized the name or number.
Always On: VoiceSignal always displays a choice list, even when there is only
one choice.
Always Off: VoiceSignal never displays a choice list.
5. Press the Select soft key or the
Sensitivity
key to confirm the selection.
This option allows you to adjust the sensitivity monitoring of voice tones.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
key.
4. At the voice prompt, press the Settings soft key, select Sensitivity and
press the Select soft key or the key.
5. Use the Up or Down Navigation keys to adjust the selected Sensitivity
setting to Reject More spoken commands or names or to Reject Less
spoken commands or names.
6. Press the OK soft key to accept the new setting.
Digit dialing
If VoiceSignal frequently does not recognize your commands, adapting digit dialing
to your voice improves the accuracy of digit recognition.
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not
able to use the handset with VoiceSignal unless the handset is reset to factory
defaults.
Adapting requires recording multiple sequences of digits. The entire adaptation
process takes approximately one minute.
85
Voice recognition
Adapting Digit Dialing Tips
• Select a quiet location when using the Adapt Digits feature.
• Wait for the beep (tone) before you begin speaking.
• Say each digit with a clear tone.
• Re-record the sequence if you make a mistake or if there is noise interference.
• Adapt digits only if you regularly experience issues with digit dialing.
Select location
This option allows you to identify the country or region where you are using the
handset.
Adapt Digits
To adapt digits perform the following:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
3. Highlight Voice recognition and press the Select soft key or the
4. At the voice prompt, press the Settings soft key, select Digit dialing and
press the Select soft key or the key.
key.
key.
5. Highlight Adapt digits and press the Select soft key or the
key.
6. Press the Back soft key or the key to return to Idle mode.
Reset Digits
To reset digits perform the following:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
4. At the voice prompt, press the Settings soft key, select Digit dialing and
press the Select soft key or the key.
5. Select Reset digits and press the Select soft key or the
Sound
key.
key.
This options allows you to determine which text, names or numbers are spoken
through the speaker or headset.
Fun & Apps 86
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
3. Highlight Voice recognition and press the Select soft key or the
4. At the voice prompt, press the Settings soft key, select Sound and press
the Select soft key or the key.
key.
5. Select one of the following options:
• Prompts: enables or disables audio prompts.
• Digits: enables or disables audio digit playback.
• Names: enables or disables audio name playback.
• Name settings: Lets you adjust the speed and volume of your phone’s audio
name playback.
• Speakerphone: enables or disables voice recognition through the
speakerphone.
6. Use the navigation keys to highlight the desired setting.
7. Press the OK soft key, Select key or
About
key to accept the new setting.
This option displays information about the VoiceSignal software such as Version,
LVR, Build and the Device.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
3. Highlight Voice recognition and press the Select soft key or the
4. At the voice prompt, press the Settings soft key, select About and press
the Select soft key or the key.
The About VoiceSignal information displays on the screen.
Image editor
key.
key.
The Image editor option allows you to edit the selected image by adding effects,
adding a frame, emoticon or clip art. You can also set the edited image as wallpaper
or a Caller ID icon.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the
key.
key.
3. Highlight Image editor and press the Select soft key or the
4. Press the Options soft key then press the Right Navigation key from the
New image menu.
5. Select Open to open an image, or take photo to take a picture.
87
Image editor
6. Press the Options soft key, and select one of the following options:
• Send via: sends this edited image as a Picture message, E-mail or to a
Bluetooth enabled device.
• New image: opens another image, or takes a photo.
• Save as: saves this edited image as a Wallpaper.
• Effects: adds a special effect to the image such as: Black and White, Negative,
Sepia, Emboss or Sketch.
• Insert: inserts a frame, Emoticons or Clip Art into the current image screen.
• Set as: displays the selected image as Wallpaper or as a Caller ID icon.
• Bluetooth visibility: allows you to enable Bluetooth so you can share the
selected file with other Bluetooth devices.
• Print via Bluetooth: allows you to send the selected image to a Bluetooth
enabled device.
• Undo: allows you to undo image edits.
7. Press the Back soft key or the
key to exit and return to Idle mode.
Fun & Apps 88
Section 10: Organizer
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
Alarm
Timer
This section outlines the various applications that are available on your phone.
Organizer
The Organizer allows you to set alarms, schedule appointments, view the calendar,
create Tasks, perform simple math calculations, check world time, perform unit
conversions, set a timer, and use a stopwatch.
Alarm
This feature allows you to:
• Set up to 3 alarms to ring at specified times.
• Set the phone to switch on automatically and ring the alarm even if the phone is
switched off.
The following options are available:
• Wake-up alarm: the alarm rings to wake you up in the morning.
• Alarm1: set the day, time, and tone for this alarm.
• Alarm2: set the day, time, and tone for this alarm.
89
Alarm
• Auto power-up: alarm rings at the specified time even if the phone is turned off.
If the option is set to Off and the phone is switched off at the specified time, the
alarm does not ring.
To set the alarm:
1. After selecting an alarm, highlight the Alarm option and press the
key.
2. Press the Right navigation key to set Alarm to On.
3. Press the Down key to highlight the Alarm time option. Enter the time you
want the Alarm to sound.
4. Press the Down key to highlight the AM/PM option. Press the Left or Right
navigation key to set to AM or PM.
5. Press the Down key to highlight the Monday-Sunday checkboxes. Press
the
6. Place a checkmark next to the days you want the alarm to sound. To place
or remove a check mark, press the key. Press the OK soft key.
key to bring up a list of days.
7. Press the Down key to highlight the Alarm tone option. Press the
key to bring up a list of alarm melodies.
8. Press the Up or Down Navigation key to highlight a default alarm melody.
- Or -
Press the Right navigation key to display a list of sounds from which
to choose.
9. Press the Save soft key.
10. Press the
key to return to Idle mode.
Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & date" on page
11. To stop the alarm when it rings, press any key or press the Snooze soft
key.
Organizer 90
Calendar
With the Calendar feature, you can:
• Consult the calendar by month, week, or day.
• Set schedules and note anniversaries
• Make a tasks list.
• Write memos to keep track of your schedule.
• Set an alarm to act as a reminder, if necessary.
• Check your memory status.
When you select the Calendar menu, the following options are available:
Month view
When you select this option, the calendar displays the selected month with today’s
date highlighted.
At the bottom of the calendar, the following icons are displayed along with the
number of entries for each:
Schedule items
Anniversary events
Tasks items
Miscellaneous items
The number of entries next to each icon reflects the number of entries for the
selected day on the calendar.
The following options are available when you press the Options soft key:
• View mode: takes you to the Day view or Week view of the selected day.
• Create: allows you to create a Schedule, Anniversary, or Miscellaneous.
• Go to: takes you to the Today’s date or another date highlighted.
• Delete: allows you to delete all events for a selected date, delete all events for a
specified period, or delete all events for this month dates. You can also delete all
event.
91
Calendar
Week view
When you select this option, the calendar displays the selected week with today’s
date and time highlighted. The following options are available when you press the
Options soft key:
• View mode: takes you to the Day view or Month view of the selected day.
• Create: allows you to create a Schedule, Anniversary, or Miscellaneous.
• Go to: takes you to today’s date or another date highlighted.
• Delete: allows you to delete all events for a selected date, delete all events for a
specified period, or delete all events for this weeks dates. You can also delete all
events.
Day view
When you select this option, you are taken to the Day view of the selected day with
any events listed. The following options are available when you press the Options
soft key:
• View: takes you to the Day view of the selected day.
• Create: allows you to create a Schedule, Anniversary, or Miscellaneous.
• Send via: allows you to send this event via a Text message or Picture message.
• View mode: allows you to choose between Month view or Week view.
• Delete: allows you to delete all events for a selected date, or delete all events for
this days’ dates. You can also delete all events.
Schedule
This option allows you to write memos to a schedule.
1. Highlight the Schedule option and press the Select
soft key or the
soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select
key.
4. Enter the subject in the Subject text box then press the Down soft key.
5. Continue to enter other information including Details, Start date, Start time,
AM/PM, End date, End time, AM/PM, Location, Alarm, before, Alarm tone,
Repeat and Until.
6. When you are finished, press the Save soft key. Your Schedule information
is then saved to the Calendar.
Organizer 92
Anniversary
This option allows you to record Anniversaries in your calendar. You can also set an
alarm to remind you of important anniversaries.
1. Highlight the Anniversary option and press the Select
soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select
soft key or the
key.
4. Enter the occasion in the Occasion text box then press the Down soft key.
5. Continue to enter other information including Date, Alarm, before, Alarm
time, AM/PM, Alarm tone, and Repeat every year.
6. When you are finished, press the Save soft key. Your Anniversary
information is then saved to the Calendar.
Miscellaneous
This option allows you to record miscellaneous dates or events in your calendar.
1. Highlight the Miscellaneous option and press the Select soft key or
the key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select
soft key or the
key.
4. Enter the subject in the Subject text box then press the Down soft key.
5. Continue to enter other information including Details, Start date, Start time,
AM/PM, End date, End time, AM/PM, Alarm, before, and Alarm tone.
6. When you are finished, press the Save soft key. Your Miscellaneous
information is then saved to the Calendar.
Missed alarm events
You can check on all of the events that you have set an alarm on.
1. Highlight the Missed alarm events option and press the Select
soft
key.
key or the
key.
2. To view an event information, highlight an event and press the
The missed alarm event information displays.
93
Tasks
3. To acknowledge and remove the event, press the Confirm soft key or the
key. The event will be removed from the Missed alarm events
menu.
Memory status
This menu item shows the number of calendar events you presently have and how
many more you memory space for. It displays your events such as Schedule,
Anniversary, Miscellaneous, and Tasks.
Tasks
This feature allows you to enter a task list.
1. Highlight the Tasks option and press the Select
soft key or the
soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select
key.
4. Enter a short description of the task in the Task text box then press the
Down soft key.
5. Continue to enter other information including Start date, Due date, Priority,
and Alarm.
6. Press the Save soft key when you are finished. Your Task list is saves to
the Calendar.
Editing the Tasks List
When you select the Tasks list menu, the current contents display with a status
checkbox and a priority marker.
If the item was done, a check displays in the checkbox.
High priority items have a red explanation mark, Normal priority items have a blue
explanation mark, and Low priority items have a gray explanation mark.
1. To mark an item Done, highlight the item and press the
key.
2. Press the Options soft key.
3. Highlight the Done option and press the Select
soft key or the
key.
4. The status checkbox next to the Task item will be checked.
5. To edit other fields in the Task item, highlight the item and press the
key.
Organizer 94
6. Press the Options soft key.
7. Highlight the Edit option and press the Select
soft key or the
soft key or the
key.
8. Edit the items you wish to change.
9. Press the Options soft key.
10. Highlight the Save option and press the Select
key.
Notes
This option allows you to create notes to add to your events.
1. Highlight Note and press the Select
soft key or the
key.
2. A blank New Memo screen displays. Enter your text and press the
Save soft key.
3. Enter the category you wish to select and press the Select
soft key.
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the
basic arithmetic functions; addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
2. Enter the operation for your calculation by pressing the
to the illustration on the display. The key is used for the decimal. The
key can also be used to create brackets.
3. Enter the next number.
4. To view the result, press the
Repeat steps 1 to 4 as many times as required.
key according
key.
Tip calculator
This feature provides the percentage amount for tip. Use the following procedures to
calculate a tip amount.
1. Highlight Tip calculator and press the Select
soft key or the
key.
2. In the Bill field, enter the check amount.
Note: To enter the decimal point for the exact dollar amount, use the
key.
3. Use the Down Navigation key to highlight Tip(%) percentage. 15 is the
default value but this can be changed.
95
World Time
4. The Tip($) field value is calculated according to the values entered.
5. Use the Down Navigation key to move to the # paying field to change the
number of people contributing to the tip amount.
6. The You pay field displays what each individual is to pay.
World Time
This feature allows you to find out what time it is another part of world, using the
Left and Right Navigation keys.
There are two time lines available. You can set the first setting to your home city and
then use the second setting to check other city times.
Press the Options soft key for the following options:
• Save: saves your world time settings.
• Apply daylight saving time: use the
key to place a checkmark next to the
cities that you want to set daylight savings time. Each city listed represents a time
zone.
Synchronization
The first time you access the synchronization feature the handset prompts with the
following message:
Synchronization complete! Phone will automatically sync on every phonebook edit
you make.
To change sync settings go to, Settings > Synchronization.To manage your contacts,
go to: “t-mobile.com”.
This feature allows you to back up (synchronize) Contact information, Schedules,
and Events stored on your phone with your T-Mobile account on the network. Each
time you edit contact information your phone automatically synchronizes (on
scheduled time intervals) with the web Address Book.
Important!: Synchronization is a free service offered to T-Mobile customers.
Organizer 96
Data to Sync
This feature allows you to synchronize your Contacts, Calendar events, and Task list
with your T-Mobile account on the network.
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Using the Navigation keys, scroll to the Organizer icon and press the
Select soft key or the
3. Highlight Synchronization by pressing the Up or Down Navigation key
and press the Select soft key or the key.
soft key or the
key.
4. Highlight Data to Sync and press the Select
key.
5. Highlight the type of data to synchronize (Contacts, Calendar or Task) and
press the OK soft key to display a check mark next to the item to
synchronize.
6. Press the Save soft key.
7. Select the Sync now option and press the Select
soft key or the
key.
8. When the “Synchronization will start?” message displays, press the
Continue soft key.
9. Press the
Sync now
key to return to the Idle mode.
Once you establish the information you want to synchronize, this feature allows you
to synchronize with the T-Mobile network.
1. In Idle mode, press the Menu
2. Using the Navigation keys, scroll to the Organizer icon and press the
Select soft key or the key.
3. Highlight Synchronization by pressing the Up or Down Navigation key
soft key.
and press the Select
soft key or the
key.
4. Highlight Sync now and press the Select
soft key or the
key.
5. When the Synchronize data with T-Mobile Sync? message displays,
press the Yes soft key to synchronize the data or press the No soft key
to cancel.
The information synchronizes with the T-Mobile network and a
confirmation dialog displays when finished.
6. Press the
key to return to Idle mode.
97
Unit conversion
Viewing the synchronization log
This feature creates a log of the synchronization activity for viewing.
1. In Idle mode, press the Menu
2. Using the Navigation keys, scroll to the Organizer icon and press the
Select soft key or the key.
3. Highlight Synchronization by pressing the Up or Down Navigation key
soft key.
and press the Select
soft key or the
key.
4. Highlight View log and press the Select
soft key or the
key.
5. The screen default displays the all sync log information.
6. Press the Back soft key when you are finished viewing the log.
7. Press the
key to return to Idle mode.
About sync
This feature launches the t-zones synchronization information display and provides
information about how the synchronization feature works. It also provides a URL for
more specific synchronization information.
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.
Unit conversion
The conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
To convert a currency, length, weight, volume, area, or temperature, do the
following:
1. Scroll to the conversion feature you wish to use and press the Select
soft key or the
key.
2. Enter the quantity you want converted.
Note: To include a decimal point, press the
key.
Organizer 98
3. Use the Up, Down, Left, and Right navigation keys to select the From and
To units of measure for the quantity you want converted.
4. Press the Back soft key to return to the Unit conversion menu.
Timer
You can use this menu to set a timer. To enable the Timer, use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
key to start the timer. Press the
key again to stop the
key to start the
timer.
Stopwatch
This feature allows you to use a stopwatch. Press the
stopwatch. Press the Reset soft key to erase all previously recorded stopwatch
times. Press the key for the lap time. You can have up to 4 lap times.
99
Time & date
Section 11: Changing Your Settings
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
This section explains the sound and phone settings for your phone. It includes such
settings as: display, security, memory, and any extra settings associated with your
phone.
Time & date
This menu allows you to change the current time and date displayed.
1. In Idle mode, press the Menu
2. Using the Navigation keys, scroll to the Settings icon. Press the Select soft
key or the key to enter the menu.
soft key to access Menu mode.
3. Highlight the Time & Date option and press the Select soft key or the
key.
Changing Your Settings 100
The following options are available:
• Time zone updating: allows you to receive time information from T-Mobile’s
network.
• Automatic: the phone automatically updates the time and date according to the
current time zone using the network service.
• Manual only: you need to manually set the time and date according to the current
time zone using the Set time menu.
• Prompt first: the phone asks for a confirmation before the update.
• Home zone: displays a selectable list of 30 different time zones.
• Time: allows you to change the hour and minute.
• AM/PM: allows you to set either AM or PM.
• Time format: allows you to select whether your time displays in either a
12 hour or 24 hour format.
• Date: allows you to enter the month, day, and year.
• Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD
format.
• Week start day: allows you to select the day of the week you wish to set as a start
day. Choose from Sunday or Monday.
To change your time and date settings:
1. Use the Up or Down Navigation key to select the option you wish to
change.
2. To Set time or Set date, use the Left or Right Navigation key to position
the cursor over the number you wish to change.
3. Enter the desired number.
4. To change other options, use the Left or Right Navigation key to select the
desired setting.
5. Press the Save soft key when you are finished changing your settings;
otherwise press the Back soft key.
Note: Automatic updates of time and date do not change the time set for alarm settings or
calendar memos.
101
Phone settings
Phone settings
You can customize various phone settings.
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Settings icon. Press the Select soft
key or the key to enter the menu.
3. Highlight the Phone settings option and press the Select soft key or the
key. The following options display:
Language
This menu allows you to select a display language for Text language and Input mode.
Choose from Automatic, English, Français, and Español.
Greeting message
This menu allows you to set a greeting to be displayed briefly when the phone is
switched on.
Slide settings
This menu determines whether you accept or reject calls with the slide in the up
position or when the slide is down.
USB settings
This menu selects the method of communication for the USB port, by Modem or
Mass Storage option.
Note: You are unable to connect to PC Studio when the Mass Storage option is selected.
Changing Your Settings 102
Extra settings
You can turn the automatic redialing or answering features on or off.
1. To turn a feature on, highlight the feature and press the
key.
A check mark displays in front of the option.
2. To turn a feature off, highlight the checked feature and press the
key.
The check mark no longer displays.
The following options are available:
• Auto redial: when this option is checked, the phone makes up to ten attempts to
redial a phone number after an unsuccessful call.
Note: The interval between call attempts varies.
• Anykey answer: when this option is checked, you can answer an incoming call by
pressing any key, except the
key or the Reject soft key. To reject the call,
press the
key or the Reject soft key. When this option is unchecked, you
must press the
key or the Accept soft key to answer a call.
3. When you finish changing your settings, press the Save soft key to save
your settings. Otherwise press the Back soft key.
Airplane mode
Airplane Mode allows you to use many of your phone’s features, such as Games,
Voice Notes, etc., when you are in an airplane or in any other area where making or
receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot
send or receive any calls or access online information.
1. To turn a feature on, highlight the Airplane option and press the Select
soft key or the
2. Highlight On or Off and press the Save soft key.
Shortcut key
key.
The Shortcut key functions as a hotkey and allows you to assign your favorite
application to this key for quick access.
To assign an application to the Shortcut key:
1. Press the
Next soft key.
key and read the Shortcut key infromation, then press the
2. Scroll to your favorite or most frequently used application by pressing the
Up or Down Navigation key.
103
Display settings
3. At the The Shortcut key is now assigned to [ ] change? prompt, if the
shortcut key was previously assigned an application press the Yes soft key.
Display settings
In this menu, you can change various settings for the display or backlight.
Wallpaper
This menu allows you to change the background image to be displayed in Idle mode.
The following options are available:
• Browse wallpapers: allows you to download additional wallpapers from t-zones.
• Default wallpapers: allows you to choose from a list of wallpapers included with
your phone.
• Downloaded images: allows you to choose a photo from your downloaded images
folder.
• Photos: allows you to choose a photo from Photos folder.
To change the background image:
1. Press the Navigation keys to scroll through the list.
2. Press the OK soft key to place a check mark next to Menu background if
you want your menu to display on the background.
3. Highlight the Transparency option and press the Left or Right Navigation
key to determine the amount of transparency for the background.
Note: The Transparency option is selctable only when the Menu background check box is selected.
4. Make a wallpaper selection and press the Save soft key or the
key.
Your wallpaper selection updates.
5. Press the Back soft key or the
Info display
key to return to Idle mode.
This menu allows you to select the text size and color for your font.
To change the size of the font:
1. Highlight the Text style option and press the Left or Right Navigation key
to select between: Normal, Outline, or Shadow.
2. Press the Save soft key or the
key to save your change. Otherwise,
press the Back soft key.
Changing Your Settings 104
To change the color of the font:
1. Highlight the Text color option and press the Left or Right Navigation key
to select between: White, Yellow, or Blue, Green, Red or Black.
2. Press the Save soft key or the
key to save your change. Otherwise,
press the Back soft key.
Skin
1. Highlight the Skin option and press the UP or Down Navigation key to
select Black and White.
2. Press the Save soft key or the
key to save your change. Otherwise,
press the Back soft key.
Brightness
You can adjust the display brightness to see it better in different lighting conditions.
1. Press the Left or Right Navigation keys to change your settings.
2. Press the Save soft key to save your changes, or the Cancel soft key
to cancel.
Backlight
In this menu, you can select the length of time that the keypad backlight is on and
how much longer the display is illuminated before going off.
The On setting is how long the keypad backlight is on. You can select 15 sec,
30 sec, 1 min, 3 min, or 10 min.
The Dim option is how much longer after the keypad backlight goes off that the
display remains lit. You can select Off, 15 sec, 30 sec, 1 min, or 3 min.
For example, if you set On for 30 sec and Dim for 15 sec, after 30 seconds the
backlight on the keys would turn off and 15 seconds later the display light would
turn off.
1. Press the Left or Right Navigation keys to change each field’s settings.
2. Press the Save soft key to save your changes, or the Cancel soft key
to cancel.
105
Display settings
Dialing display
This menu allows you to select the size and color of your dialing font and the
background color.
To change the size of the font:
1. Highlight the Font size option and press the Select soft key or the
key.
2. Use the Left or Right Navigation key to select between: Large, Medium,
or Small.
3. Press the Save soft key or the
key to save your change. Otherwise,
press the Back soft key.
To change the color of the font:
1. Highlight the Font color option and press the Select soft key or the
key.
2. Use the Left or Right Navigation key to select either Basic (black or white),
Rainbow, Monochrome or Gradation. If you select Monochrome or
Gradation, you can select another option by using the Down Navigation
key and then scroll through the available choices.
3. Choose from up to 15 different options.
4. Press the Save soft key or the
key to save your change. Otherwise,
key.
press the Back soft key or the
To change the background color:
1. Highlight the Background color option and press the Select soft key or
the key.
2. Use the Left or Right Navigation key to select between 20 different colors
or None.
3. Press the Save soft key or the
key to save your change. Otherwise,
press the Back soft key.
Calendar
This option allows you to On (enable) or Off (disable) the calendar display for your
background wallpaper.
Show caller information
By turning this option On, when you miss an incoming call, information such as the
caller name displays on your screen when your missed calls are listed.
Changing Your Settings 106
Bluetooth
About Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
This option allows you to turn Bluetooth On or Off.
ᮣ
Make a selection and press the Select soft key or the
key.
My devices
This option allows you to search for new Bluetooth devices.
ᮣ
Highlight the Search new device option and press the Select soft key or
the key.
The phone searches for available devices.
My visibility
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its
phone name and status. This can be useful if you are attempting to connect
additional Bluetooth devices. Allowing your phone to promote its visibility can pose a
security risk and incite unauthorized connection. This feature should be paired with a
Bluetooth security option.
ᮣ
Highlight the option (On/Off) and Select (Left) soft key or the
key.
My phone name
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name
entered into this text field. This name can be altered by selecting the pre-existing
text and selecting a new text string in its place. This feature should be paired with a
Bluetooth security option.
1. Press the
key to erase the previous name.
107
Sound settings
2. Use the phone’s keypads to enter a new name. The default input entry
method is Abc, where the initial character is Uppercase and each
consecutive character in that same word is left as lowercase text.
3. Press the Save soft key or the
Security modes
key to save the new name.
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its
phone name and status. This transmission can pose a security risk and incite
unauthorized connection to your phone. It is recommended that you active your
phone’s Bluetooth security.
1. Highlight the option (On/Off) and press the Select soft key or the
Features
key.
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
integrate.
The following Service profiles are available:
• Headset: the remote Bluetooth headset enables both incoming and outgoing calls.
• Handsfree: the remote Bluetooth car kit enables both incoming and outgoing calls.
• Bluetooth stereo headset: used to make calls and listen to music through the
Bluetooth stereo headset.
• File transfer: used to transfer files to and from Bluetooth devices.
• Object push: used to exchange personal dta (namecards, Phonebook contacts,
etc.) with Bluetooth devices.
• Basic printing: used to print images, text messages, personal data such as
namecards and appointments, etc. through a remove Bluetooth printer.
• Dial-up networking: used to provide Internet access for Bluetooth devices through
the hone’s modem.
• Serial port: used to connect to other Bluetooth devices through a vitual serial port.
Help
This options takes you to the T-Mobile Help menu in t-zones.
Sound settings
You can customize various sound settings.
Changing Your Settings 108
Incoming call
Note: When downloading Mega Tones® or HiFi RingersTM, charges may apply.
Browse MegaTones
Using the Browse MegaTones option on the sounds list, you can quickly access the
T-Mobile website and download new sounds by using the t-zone browser.
ᮣ
Press the Connect soft key to purchase additional sound files.
Browse HiFi Ringers
Using the Browse HiFi Ringers option on the sounds list, you can quickly access the
T-Mobile website and use the t-zone browser to download new HiFi Ringers.
ᮣ
Press the Connect soft key to purchase additional ringtones.
Ring tone
This menu allows you to select a ring melody.
1. Highlight Ring tone and press the
key.
2. Use the Up or Down key to highlight a ring tone or press the Left or Right
Navigation key to select a file from either the Default Melodies, Voice list,
Downloaded sounds, or music folders.
3. Press the Select soft key.
Volume
This menu allows you to adjust the ring volume to one of 7 levels.
Use the Right or Left Navigation key to increase or decrease the volume.
ᮣ
Alert type
This menu allows you to specify how you are to be informed of incoming calls.
ᮣ
Use the Right or Left Navigation key to select a Alert type.
The following options are available:
• Melody: the phone rings using the ring melody selected in the Ringtone menu.
• Vibration: the phone vibrates but does not ring.
• Melody and vibration: the phone plays the melody and vibrates
simultaneously.
• Vibration then melody: the phone vibrates 3 times and then starts ringing.
• Melody then vibration: the phone plays the melody and then vibrates.
109
Sound settings
Keypad tone
This menu allows you to select the key tone and volume that the phone sounds when
you press a key.
1. Use the Left or Right Navigation keys to make your selections.
2. Select Off to turn the sound off.
3. Scroll to Volume and press the Left or Right Navigation keys to adjust the
volume.
Message tone
This menu allows you to set up the ringer for incoming messages. You can set the
Tone, Alert type, and Repetition.
ᮣ
Use the Left or Right Navigation keys to make your selections.
Power on/off tone
This menu allows you to select the melody that the phone sounds when it is
switched on and off.
ᮣ
To turn the sound on select Tone 1 or Tone 2. Select Off to turn the
sound off.
Slide tone
This menu allows you to choose from four tones, or Off when sliding the
phone open.
Silent mode
This menu allows you to select whether or not your phone vibrates while in silent
mode. You may choose between Vibration and Mute.
Extra tones
You can customize additional tones for the phone.
1. Press the
key to turn a selected tone On. A check mark displays in
front of the option. Press the Save soft key to save the setting.
2. Press the
key twice to turn a selected tone Off. The check mark no
longer displays in front of the option. Press the Save soft key to save the
setting.
Changing Your Settings 110
The following options are available:
• Indicative tone: generates a tone whenever a pop-up window displays on the
screen.
• Minute minder: sets whether or not the phone beeps every minute during an
outgoing call to keep you informed of the length of your call.
• Connection tone: sets whether or not the phone beeps when your call is
connected to the system.
• Alerts on call: sets whether or not you receive tones when a message arrives while
you are on a call.
Synchronization
The first time you access the synchronization feature the handset prompts with the
following message:
Synchronization complete! Phone will automatically sync on every phonebook edit
you make.
To change sync settings go to, Settings > Synchronization.To manage your contacts,
go to: “t-mobile.com”.
This feature allows you to back up (synchronize) Contact information, Schedules,
and Events stored on your phone with your T-Mobile account on the network. Each
time you edit contact information your phone automatically synchronizes with the
web Address Book.
Important!: Synchronization is a free service offered to T-Mobile customers.
Data to Sync
This feature allows you to synchronize your Contacts, Calendar events, and Task list
with your T-Mobile account on the network.
1. In Idle mode, press the Menu soft key.
2. Scroll to Organizer and press the Select soft key or the
3. Highlight Synchronization by pressing the Up or Down Navigation key
and press the Select soft key or the key.
4. Highlight Data to Sync and press the Select soft key or the
key.
key.
5. Highlight the type of data to synchronize (Contacts, Calendar or Task) and
press the OK soft key to display a check mark next to the item to
synchronize.
6. Press the Save soft key.
111
Synchronization
7. Select the Sync now option and press the Select soft key or the
key.
8. When the “Synchronization will start?” message displays, press the
Continue soft key.
9. Press the
Sync now
key to return to the Idle mode.
Once you establish the information you want to synchronize, this feature allows you
to synchronize with the T-Mobile network.
1. In Idle mode, press the Menu soft key.
2. Scroll to Organizer and press the Select soft key or the
3. Highlight Synchronization by pressing the Up or Down Navigation key
and press the Select soft key or the key.
key.
4. Highlight Sync now and press the Select soft key or the
key.
The information synchronizes with the T-Mobile network and a
confirmation dialog displays when finished.
5. Press the
key to return to Idle mode.
Viewing the synchronization log
This feature creates a log of the synchronization activity for viewing.
1. In Idle mode, press the Menu soft key.
2. Scroll to Organizer and press the Select soft key or the
key.
3. Highlight Synchronization by pressing the Up or Down Navigation key
and press the Select soft key or the key.
4. Highlight View log and press the Select soft key or the
key.
5. The screen default displays the all sync log information.
6. Press the Back soft key when you are finished viewing the log.
7. Press the key to return to Idle mode.
Changing Your Settings 112
About sync
This feature displays information about how the synchronization feature works and
provides a URL for more specific synchronization information.
Press the More Info soft key to launch the t-zones synchronization information.
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.
Network services
Call forwarding
This network service enables incoming calls to be re-routed to a secondary,
pre-specified number.
Example: Forwarding business calls to a colleague while on holiday.
To set your call forwarding options:
1. Select the Call forwarding option and then press the Select soft key or the
key.
2. Select a call forwarding option by pressing the Up or Down Navigation key
and then press the Select soft key or the
key.
The following options are available:
• Forward always: all calls are forwarded until this feature is cancelled.
• Busy: calls are forwarded when you are already on another call.
• No reply: calls are forwarded when you do not answer the phone.
• Unreachable: calls are forwarded when you are not in an area covered by
T-Mobile or when your phone is switched off.
• Cancel all: all call forwarding options are canceled.
3. Select the type of forwarded calls, Voice calls or Data calls, by pressing
the Up or Down Navigation key to select the appropriate field, and then
press the Select soft key or the
key.
The current status displays. If the option was already set, the number to
which the calls are forwarded displays.
4. To activate call forwarding, select Activate by using the Left or Right
Navigation key. The Forward to field then becomes available to input the
number.
113
Network services
5. Enter the number to which the calls are to be forwarded in the Forward to
text box and press the Select soft key or the
To enter an international code, press and hold the
+ sign displays.
key.
key until the
The phone sends your settings to the network and the network’s
acknowledgement displays.
6. Select Deactivate by using the Left or Right Navigation key to deactivate
call forwarding.
Call barring (SIM Card Dependent)
Call Barring allows you to restrict specific types of incoming and outgoing calls on
your phone. This is useful if you allow someone to use your phone for a short period
of time.
Call waiting
This network service informs you when someone is trying to reach you during
another call.
You can specify individual call waiting options for voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, Voice calls or Data calls, to which the call waiting
option is to be applied by pressing the Up or Down Navigation key.
The screen informs you whether call waiting is activated or deactivated.
2. Press the Select soft key or the
key to access the call’s status menu.
3. Highlight Deactivate or Activate and press the Select soft key or the
key.
Call waiting activates or deactivates for the selected call type.
4. Select the Cancel all option to deactivate Call waiting on all voice and data
calls.
Network selection
The Network Selection feature enables you to automatically or manually select the
network used when roaming outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement
between the two.
Changing Your Settings 114
To change the Network Selection mode:
1. Highlight the Search now option and press the Select soft key or the
key.
2. Press the Up or Down Navigation key until the network you want highlights
and then press the Select soft key or the
The phone scans for that network and, if available, you are connected.
To change your Default setup:
key.
1. Highlight the Default setup option and press the Select soft key or the
key.
2. Highlight either the Automatic or Manual option and press the Select soft
key or the
key.
• If you select Automatic, you connect to the first available network when
roaming.
• If you select Manual, the phone begins searching for available networks. Press
the Up or Down Navigation key until the network you want is highlighted and
then press the Select soft key or the
key. The phone then scans the
selected network to see if you can be connected, and if a connection is possible,
you are connected.
Caller ID
You can prevent your phone number displaying on the phone of the person you
called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide number: your number does not display on the other person’s phone.
• Send number: your number is sent each time you make a call.
Security
The Security feature enables you to restrict the use of your phone by others and to
restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter your PIN each time you
switch on the phone. Consequently, any person who does not have your PIN cannot
use your phone without your approval.
115
Security
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you switch it on.
• Enable: you must enter the PIN each time the phone is switched on.
Change PIN
This feature allows you to change your current PIN, provided that the PIN check
feature is enabled. You must enter the current PIN before you can specify a new one.
Once you enter a new PIN, you are asked to confirm the PIN number by
re-entering it.
Phone lock
When the Phone lock feature is enabled, the phone is locked and you must enter the
4- to 8-digit phone password each time the phone is switched on. Once the correct
password is entered, you can use the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when you switch on the
phone.
• Enable: you are required to enter the phone password when you switch on the
phone.
Change password
The Change password feature allows you to change your current phone password to
a new one. You must enter the current password before you can specify a new one.
Once you enter a new password, you are asked to confirm the change by entering
the password again.
Note: If you change your password, be sure to record it and keep it in a safe place. If you forget your
password, contact your Service Provider for assistance.
Changing Your Settings 116
Lock application
With this feature you can lock your applications which provide access to information
such as call records, phonebook, messages, images, and sounds. Once you lock the
contents, you must enter the phone’s password to access the associated menus.
1. Press the Up or Down Navigation key to select an item to lock
2. Press the
key to place a check mark on the selected item.
• To lock all of the contents, select All.
3. Highlight the previously selected item and press the
key to remove a
check mark.
4. Press the Save soft key to lock the marked items.
5. Enter a password and press the OK soft key or the
key.
FDN mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook. You must enter your
PIN2. You can obtain your PIN2 from T-Mobile’s customer service.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a new one. You
must first enter the current PIN2 (obtained from T-Mobile) before you can specify a
new one. Once you enter a new PIN2, you are asked to re-enter the new PIN2 to as
confirmation.
Note: Not all SIM cards have a PIN2. This menu does not display if your SIM card does not have the PIN2
feature.
117
Software update
Software update
The Software Update feature enables you to connect to the network through the
handset and upload any new phone software.
1. When the Idle mode displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
3. Select Software update and press the Select soft key or the
4. Press the key to continue the update process and follow the
on screen instructions.
Memory status
key.
key.
You can check the amount used or available memory for Shared memory, Messages,
Files, Calendar, Phonebook and Notes.
The screen displays the total amount of used and free space. You can view the space
occupied by each message box. You can also view how many names and numbers
are stored in the Phonebook, as well as the phone memory. The capacity of both
memories also displays.
Reset settings
From this menu you can reset your phone and sound settings to the default settings.
The following options are available:
• All: Phone, Display, Sound and WLAN (Wireless Local Area Network) settings are
returned to default values.
• Phone settings: only phone settings are returned to default values.
• Display settings: only display settings are returned to default values.
• Sound settings: only sound settings are returned to default values.
To reset your settings:
1. Highlight one of the options and press the
key to place a check mark
next to the option.
2. Press the Reset soft key.
3. You are prompted with Reset settings?. Press the Yes soft key.
4. Enter the 4- to 8-digit password and press the OK soft key or the
key. You receive a reset confirmation message.
Changing Your Settings 118
Section 12: Camera
Topics Covered
•
•
•
•
•
•
•
Thissectionexplainshowtousethecameraonyourphone.Youcantakephotographs
by using the built-in camera functionality.
Using the Camera
Using the camera module in your phone, you can take photos of people or events
while on the move. Additionally, you can send these photos to other people in a
Picture Messaging message or set a wallpaper or caller ID image.
Note: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another person’s privacy.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
Tip: Press the key on the right side of the phone as a shortcut access to the camera module.
3. Highlight Camera and press the Select soft key or the
key.
119
Take and Send
4. Highlight Take and Send and press the Select soft key or the
key.
5. Adjust the image by aiming the camera at the subject.
6. Press the Left
soft key to access the camera options. For details, see
Tip: You can use the keypad to quickly change the camera options.
7. Press the or
key to take the photo. Send to: My Album Online ?
displays.
8. Press the Yes soft key if you want to send the photo to your T-Mobile
My Album Online service. The phone’s default destination is set to My
Album. The photo is automatically saved in Photos in the phone.
Note: To change the default destination for your pictures, press the Options soft key when Send to: My Album
Online? displays on the screen. Highlight the Default destination option and the Replace option. You can
then change your default destination to a phone number, e-mail address, Phonebook, My Album, My
Journal, and Recent recipients.
9. Press the Options soft key to send the newly taken photograph.
10. Highlight Send to and press the Select soft key or the
key.
11. Select from one of the following destinations by pressing the Up or Down
Navigation key:
• Recent recipients: allows you to send to one of the recent recipients.
• Phonebook: allows you to select a recipient from the phonebook.
• New recipient: allows you to enter the phone number or the E-mail address
for a new recipient.
• My Album: sends the message to My Album.
• My Journal: sends the message to My Journal.
12. To return to Capture mode, press the Back soft key.
13. Press the Options soft key and select Take another.
14. Press the
key to take another picture.
key to return to the Idle mode.
15. Press the
Configuring Picture Options
After you take a picture, press the
key to access the photo’s Options menu for
the current photograph. This list of options differ from the Camera’s main menu
which allows you to configure options for the camera and not for the picture.
Camera 120
The following options are available:
• Take another: allows you to delete the recently taken photograph and returns you
to camera mode to take another photo.
• Send to: displays the Send to menu and allows you to select a destination for the
currently taken photograph. This destination can be a single or multiple
recipient(s) (such as, Recent recipients, Phonebook, or New recipient) or to a
remote folder such as My Album or My Journal.
• Edit message: allows you to edit the contents of the outgoing picture message
(such as Subject, Photo, Sound and Text).
• Set as: allows you to use the current photo as an Caller ID or Wallpaper.
• Default destination: allows you to Remove a current destination location or
Replace the current location by establishing a new folder in which to place the
pictures. Select from the following options: Recent recipients, Phonebook, Phone
number, E-mail address, My Album, or My Journal.
Note: To change the default destination for your pictures, highlight the Default destination option, press the
Right Navigation key, then select Change.
• Edit image: allows you to add effects to the selected image or add a frame,
emoticon or clip art to the image.
• Delete: allows you to delete the selected photo.
• Rename: allows you to overwrite the currently defaulted photo name.
• Go to Photos: takes you to your Photos folder.
• Print via Bluetooth: allows you to send the selected image to a Bluetooth enabled
device.
• Lock/Unlock: allows you to lock or unlock the selected content.
• Properties: shows the properties of the current photo such as the Name, Date,
Format, Resolution, Size, and Lock/Unlock.
1. To return to the Capture mode, press the Back soft key.
2. Press the
key to return to Idle mode.
121
Take and Send
Configuring Camera Options
1. In Capture mode, press the Left soft key to use use various options for the
camera module.
The following options are available:
• Record video: allows you to record an audio file while video taping.
• Shooting Mode: allows you to assign what sequence is followed when a
photograph is taken.
-
Single shot: allows you to take just one photo.
-
Multi-shot: takes a succession of consecutive photos. Press the Select (Left)
soft key to set the number of shots to either:
- 6 shots, Normal
- 6 shots, High
- 9 shots, Normal
- 9 shots, High
- 15 shots, Normal
- 15 shots, High
-
Mosaic style: takes up to four photos and then groups them together into a
single final photo. Press the Select (Left) soft key to set the size of these mosaic
photos to either:
- 4 up
- 9 up
- or 13 other mosaic patterns from which to choose
• Effects: allows you to change the color tone or apply special effects to the
photo.
-
Options include: No Effects, Black & White, Negative, Sepia, Emboss, Sketch,
and Aqua.
• Frames: allows you to select a custom frame border for your photo. Choose
from one of the 30 available frames.
• Timer: allows you to set a time delay before the camera takes the photo. Select
the length of delay you want. When you press the or
takes the photo after the specified time has elapsed.
key, the camera
• Default destination: allows you to Remove a current destination location or
Change the current location by establishing a new folder in which to place the
photo(s). Select from the following options: Recent recipients, Phonebook, Phone
number, E-mail address, My Album, or My Journal.
• Go to Photos: takes you to your Photos folder.
• Camera Settings: allows you to change the Function and Setup settings.
-
Photo settings - refer to the following.
-
Setup - refer to the following.
Camera 122
Photo Settings
• Size: allows you to set the image size to either: 1280x1024, 1024x768,
800x600, 640x480, 320x240, 176x220, or 176x144. The selected image size
displays on the capture screen.
• Viewfinder mode: allows you to set the view finder to Full screen, Full screen &
Indicator, Full screen & Guideline, Actual screen.
• Scene program: allows you to set the camera options to record normal or night
scene.
• Metering exposure: allows you to set the metering to Matrix, Center-weighted,
or Spot.
• White balance: allows you to set this option from the following choices: Auto,
Daylight, Incandescent, Fluorescent, or Cloudy.
• ISO: allows you to set the ISO (film speed) for Automatic, 100, 200, or 400.
Setup Options
• Shutter sound: allows you to select from three shutter sounds (Shutter 1,
Shutter 2 or Shutter 3).
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On or Off.
• Default name: allows you to change the default name assigned to your photo.
Camera Shortcuts
You can change options using your keypad in capture mode. The following short cuts
are available:
takes the photograph.
displays the camera Capture mode.
Up volume zooms in and Down volume zooms out.
Up and Down navigation keys zoom in and out.
Left and Right navigation keys adjust the image brightness.
toggles between camera and video mode.
allows you to set the image size.
123
Record video
allows you to assign what sequence is followed when a
photograph is taken (single shot, multi-shot or mosaic)
allows you to change the color tone or apply speical effects to the
photo.
allows you to adjust the white balance.
allows you to select a custom frame border for your photo.
sets the delay timer for 3, 5 or 10 seconds.
sets the ISO film speed.
navigates to the Photos folder.
1 press-displays the camera icons, 2-presses displays the
guidelines, 3-presses displays the desktop view, 4-presses
displays a full page view.
Record video
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your
subject with sufficient light by putting the light source behind you.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
3. Highlight Camera and press the Select soft key or the
4. Press the Options soft key and select Record video then press the
Select soft key or the key.
key to enter the menu.
key.
5. Before filming the video, press the Option
soft key to access
camcorder options.
6. Adjust the image by aiming the camera at the subject.
7. Press the key to begin shooting video.
Camera 124
8. Press the Pause soft key to stop the recording.
-or-
9. Press the
Videos folder.
key to stop the recording and save the video file to your
10. Once the file saves, press the
key to play back your video for review.
Camcorder Options
1. Press the
key to access the camcorder options.
• Take picture: toggles from video to camera mode.
• Effects: sets a custom color tone for your video. Choose from the following
Effects Mode.
-
Options include: No effects, Black & White, Negative, Sepia, Emboss, Sketch and
Aqua.
• Timer: sets a time delay before the camcorder begins to shoot video.
-
-
-
-
Off
3 seconds
5 seconds
10 seconds
• Go to Videos: accesses the list of videos stored within the Video folder. Press
the Options soft key to view the following options for these clips:
Play: plays the video clip.
-
-
Send via: attaches the multimedia file to a message, e-mail, or sends it to a
Bluetooth device.
-
-
Delete: deletes either Selected or Multiple multimedia videos.
Move to memory card: moves either a Selected or Multiple videos to the
Memory card.
-
Copy to memory card: copies the Selected or Multiple videos and then
sends it to the Memory card.
Note: the Move and Copy features are available when a memory card is inserted.
-
-
-
Rename: renames either Selected or Multiple videos.
Display mode: displays the videos in either Line view or Thumnail view.
Bluetooth visibility: enables Selected or Multiple videos visibility to Bluetooth
devices.
-
-
Lock/Unlock: locks the video file to prevent deletion or unlocks it to allow
deletion.
Properties: displays the properties of the current video such as Name, Date,
Format, Resolution, Size, Length, Quality, and Lock/Unlock.
125
Record video
• Camcorder Settings: customizes your camcorder settings. Choose from the
following options:
-
-
-
-
Recording Mode: sets the maximum allowable recording time. Choose Limit
for message, Limit for e-mails, or Normal.
Size: sets the video size. Choose QCIF (176 x 144) or QQVGA(160 x 120), Sub-
QCIF (128 x 96).
Audio Record: allows you to choose whether to use audio in your video.
Choose between On or Off (microphone is muted).
White balance: sets the white balance for the camcorder. Choose Automatic,
Daylight, Incandescent, Fluorescent or Cloudy.
-
-
-
Zoom sound: turns the Zoom sound Off or On.
Brightness sound: turns the Brightness sound Off or On.
Default name: allows you to alter the default name for videos.
• Camcorder Shortcuts: displays the shortcut keys associated when using the
camcorder.
2. Press the Back soft key to return to the picture viewer.
3. You can use the keypad to quickly change the camera options using the
camera shortcut keys.
Note: For more information about Camera Shortcut Keys see "Camcorder Shortcuts" on page 126.
Camcorder Shortcuts
Shortcut keys allow you to change options using your keypad, Navigation keys, and
Volume key in capture mode. The following options are available.
shoots video.
Up volume zooms in and Down volume zooms out.
Up and Down navigation keys zoom in or out.
Left and Right navigation keys adjust the image brightness.
switches the handset between camcorder and camera mode.
changes the video size.
Camera 126
changes the recording mode.
changes the effects used on the video.
allows you to adjust the white balance.
within the camcorder mode, this toggles the microphone
On/Off (mute).
sets a time delay (Off, 3, 5, or 10 seconds).
navigates to the My video clips folder.
Photos
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
key.
key.
4. Select Photos and press the Select soft key or the
When you access this menu, your phone displays the photos in Line view,
which shows them as small images. Use the Navigation keys to scroll
through the photos.
5. To view the photos on the full screen, press the
key. To go back to
Line view, press the Back soft key or the
key.
6. Press the Options soft key to use the following options:
• Send to My Album: allows you to send your photos to My Album.
• Send via: sends the photo via Picture message, E-mail message or to a
Bluetooth device.
• Set as: allows you to set the photo as your Caller ID or Wallpaper.
• Default destination: allows you to Remove or Change where your photos are
sent after you take them.
• Edit image: allows you to add effects to the selected photo or add a frame,
emoticon or clip art to the photo.
• Delete: allows you to delete the selected or multiple photos.
• Move to memory card: allows you to move the Selected or Multiple photos
to the Memory card.
127
Videos
• Copy to memory card: allows you to copy the Selected or Multiple photos to
the Memory card.
• Rename: allows you to rename the photo.
• Slide show: allows you to see all of your photos in a slide show presentation.
Choose from 1 or 3 seconds intervals.
• Bluetooth visibility: enables or disables Bluetooth visibility.
• Print via Bluetooth: allows you to send the selected photo to a Bluetooth
enabled device.
• Lock/Unlock: allows you to protect the photo from deletion or allows you to
unlock it for deletion.
• Properties: shows the properties of the photo, such as the file name, file date,
file format, image resolution, file size, and lock/unlock.
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the Photos menu, highlight the photo you want to delete. Press the
Options soft key and select Delete.
2. Press the Select soft key then press the Right Navigation key.
3. Select Selected or Multiple and press the Select soft key or the
key.
4. Press the Yes soft key to confirm the deletion.
5. Press the
key when you are finished.
Videos
In this menu, you can view a list of videos downloaded from the web server or
received in multimedia messages. You can select a video clip from your Videos folder
by scrolling to the video you want to view, highlighting a video and pressing the
Options soft key to choose from the following options:
• Play: plays the selected video.
• Send via: sends the video via Picture message or to a Bluetooth device.
• Delete: deletes the selected video or all downloaded videos.
• Move to memory card: allows you to move the Selected or Multiple videos to the
Memory card.
• Copy to memory card: allows you to copy the Selected or Multiple videos to the
Memory card.
• Rename: changes the name of the video.
• Display mode: allows you to view the pictures in Line view or Thumbnail view.
• Bluetooth Visibility: turns Bluetooth Visibility on or off for Selected or
Multiple videos.
Camera 128
• Lock/Unlock: locks the video to protect it from deletion or unlocks it to allow
deletion.
• Properties: displays the video name, date, format, resolution, date, length, quality,
and lock/unlock.
My Album
My Album is a private online picture album that you can use to store and share
pictures, videos, voice messages, and text.
Use the following procedures to access My Album.
Note: When accessing My Album, charges may apply. The feature is not activated until you send your first
image to the remote My Album location.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select My Album and press the Select soft key or the
key. The
t-zones browser is then launched and the T-Mobile Web page displays.
5. Scroll down to the My Album link and press the Select soft key or the
key.
6. Select the My Albums Menu link and press the Select soft key or the
key.
7. Photos sent to this folder are stored in the Inbox Album. Press the Select
soft key to view the photos.
8. Press the
key to exit t-zones and return to the Idle screen.
129
My Journal
My Journal
Make notes in My Journal, your online diary and Weblog. Keep it private to store your
personal memories, or send e-mail invitations to ask people to view and comment
on your album. Contact T-Mobile customer service for more information.
Note: Charges may apply when accessing My Journal. Contact your T-Mobile service representative.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon. Press the Select
soft key or the
key to enter the menu.
3. Highlight Camera and press the Select soft key or the
key.
key. The
4. Select My Journal and press the Select soft key or the
t-zones browser is then launched and the T-Mobile Web page displays.
Camera 130
Section 13: Health and Safety Information
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
131
Health and Safety Information
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC
RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
• Head: 0.841 W/Kg.
• Body-worn: 0.576 W/Kg.
Health and Safety Information 132
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
133
Consumer Information on Wireless Phones
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Health and Safety Information 134
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
135
Consumer Information on Wireless Phones
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
Health and Safety Information 136
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
137
Consumer Information on Wireless Phones
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
Health and Safety Information 138
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
• Environmental Protection Agency (EPA):
• Occupational Safety and Health Administration's (OSHA):
• National Institute for Occupational Safety and Health (NIOSH):
• World Health Organization (WHO):
139
Road Safety
• International Commission on Non-Ionizing Radiation Protection:
• National Radiation Protection Board (UK):
• US Food and Drug Administration
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
Health and Safety Information 140
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
141
Responsible Listening
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the headphones that
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing in
your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
Health and Safety Information 142
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: [email protected]
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
143
Using Your Phone Near Other Electronic Devices
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile
phones, to assist hearing device users in finding phones that may be compatible
with their hearing devices. Not all phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing
device and hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the
phone with your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not labeled. M4 is
the better/higher of the two ratings.
Health and Safety Information 144
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than
unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference.
Your hearing device manufacturer or hearing health professional may help you find
results for your hearing device. The more immune your hearing aid is, the less likely
you are to experience interference noise from mobile phones.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
145
Emergency Calls
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
Health and Safety Information 146
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
147
Product Performance
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is
automatically activated. If your phone is active, it periodically rechecks service
availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Health and Safety Information 148
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in serious safety
hazards.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
149
Battery Precautions
accessories. If unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices could result
in damage to the equipment and a possible risk of fire, explosion, leakage, or other
serious hazard.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the + and -
terminals of the battery (metal strips on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal objects,
such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
Health and Safety Information 150
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
151
Standard Limited Warranty
Section 14: Warranty Information
Topics Covered
•
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
1 Year
Batteries
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada.
Warranty Information
152
This Limited Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
153
Standard Limited Warranty
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
Warranty Information
154
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in
order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
155
Standard Limited Warranty
Samsung Telecommunications America, LLC
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed
in brackets.
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
Warranty Information
156
making a call from phonebook
Index
Call Records
A
B
Backlight
Caller Group
description 15
settings 105
Battery
charging 6
installing 5
adding 62
removing 5
editing 63
Bluetooth
about 107
features 108
searching for new devices
effects 125
settings 126
turning bluetooth on and off
Camera Options
timer 125
Camera Shortcuts
C
Calendar 91
157
Missed Call
viewing 20
Mute 23
P
Phone
icons 14
Phonebook
Photos
PIN
N
Network Services
change 116
check 115
R
O
Options
making a new call while in a
call 24
S
Security 115
Settings 100
Organizer 89
bluetooth 107
display 104
phone 102
calculator 95
calendar 91
stopwatch 99
synchronization 96
timer 99
reset 118
security 115
sound 108
synchronization 111
159
|