Samsung SGH T245G User Manual

SGH-T245G  
M O B I L E  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
GH68-33989A  
Printed in China  
®
®
Nuance , VSuite, T9 Text Input, and the Nuance logo are trademarks or  
registered trademarks of Nuance Communications, Inc., or its affiliates in the United  
States and/or other countries.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination  
mark (Bluetooth word mark and “B Design”) are registered trademarks and are  
wholly owned by the Bluetooth SIG.  
Open Source Software  
Some software components of this product incorporate source code covered under  
GNU General Public License (GPL), GNU Lesser General Public License (LGPL),  
OpenSSL License, BSD License and other open source licenses. To obtain the  
source code covered under the open source licenses, please visit:  
.
SAR Information  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the emission limits for exposure to radio frequency (RF)  
energy set by the Federal Communications Commission (FCC) of the U.S.  
Government. These limits are part of comprehensive guidelines and establish  
permitted levels of RF energy for the general population. The guidelines are based  
on the safety standards that were developed by independent scientific organizations  
through periodic evaluation of scientific studies.  
The standards include a substantial safety margin designed to assure the safety of  
all persons, regardless of age and health.  
The exposure standard for wireless phones employs a unit of measurement  
known as Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.  
The highest SAR values for this model phone were Head: 0.43 W/kg,  
Body-worn: 0.73 W/kg.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH  
OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR  
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
TracFone_T245G_UDKD3_MM_042111_F4  
Table of Contents  
1
2
3
Section 1: Getting Started  
This section explains how to start using your phone by charging your battery and  
setting up your voice mail.  
Setting Up Your Phone  
SIM Card  
Your phone comes with a pre-installed SIM card.  
Removing and Replacing the Battery  
To remove the battery:  
1. If the phone is turned on, press and hold  
until the phone turns off.  
2. Remove the battery cover by sliding it in the direction of the arrow (1).  
3. Carefully lift the battery cover away from the back of the phone (2).  
4
   
4. Lift the battery up (1) and away from the phone (2).  
To replace the battery:  
5. Slide the battery into the phone with the gold contacts on the battery  
matching those in the phone (1).  
6. Press the battery down until it clicks into place (2).  
Getting Started  
5
7. Reinstall the battery cover by sliding it back onto the phone (1) until you hear  
it securely click (2).  
Note: Make sure the battery is properly installed before switching on the phone.  
Charging the Battery  
Your phone is powered by a rechargeable Li-ion battery. A travel adapter used for  
charging the battery is included with your phone. Use only approved batteries and  
chargers. Ask your local Samsung dealer for further details.  
You can use the phone while the battery is charging, but doing so requires  
additional charging time.  
Note: You must fully charge the battery before using your phone for the first time. A discharged  
battery requires 4 hours to recharge fully.  
1. With the battery installed, temporarily remove the plastic cover of the  
interface jack on the right side of the phone and plug the travel adapter  
connector into the jack.  
6
 
Important!: Verify the handset battery is properly installed before connecting the travel adapter. If  
the battery is not properly installed and the travel adapter is connected, the handset  
continuously power cycles and prevents proper operation.  
Incorrect  
Correct  
Note: This illustration shows both the correct method and the incorrect method for connecting the  
charger. If you connect the charger incorrectly, you risk damaging the accessory port and  
voiding the phone warranty.  
Warning!: If the adapter power plug is installed incorrectly, damage to the accessory port occurs  
and voids the phone warranty.  
2. Plug the adapter power plug into a standard AC wall outlet.  
3. When charging is finished, unplug the adapter power plug from the AC wall  
outlet, then disconnect the travel adapter connector from the phone.  
Warning!: Failure to unplug the travel adapter before removing the battery can cause damage to  
the phone.  
4. Replace the plastic cover over the interface jack on the phone.  
Getting Started  
7
Low Battery Indicator  
When the battery is weak with only a few minutes of talk time remaining, a warning  
tone sounds and the “Battery low” message repeats at regular intervals on the  
display. In this condition, your phone conserves its remaining battery power, not by  
turning off the backlight, but by entering the dimming mode. When the battery level  
becomes too low, the phone automatically turns off.  
Turning the Phone On or Off  
1. Press and hold the  
key until the phone power-on screen displays.  
2. If the phone asks, enter a password and press  
. (For further details, see  
“Change Phone Password” in the phone Security section on page 56.)  
The Idle screen displays while the phone searches for your network. The  
signal strength bars show adequate signal after a network is found.  
Note: The display language is preset to Automatic at the factory. To change the language, use the  
Language menu. For more information, see Phone settings on page 55.  
3. When you wish to switch off the phone, press and hold the  
key.  
Setting Up Your Voice Mail  
In Idle mode, press and hold the  
key. When connected, follow the voice  
prompts from the voice mail center.  
8
   
Text Conventions  
The following terms and icons appear in this manual to describe the steps and  
procedures for using your phone:  
highlight  
select  
UsetheNavigationkey(  
item or screen item of interest.  
)tomoveahighlightingeffect ontoamenu  
After “highlighting” a menu item or screen item, press the  
key  
to launch, access, or save a highlighted menu item or screen field  
of interest.  
Used in place of “select” in long “drill down” procedure steps.  
Example: “...Settings  
Phone  
Language...”  
Getting Started  
9
 
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also displays the screen  
and the icons that are displayed when the phone is in use.  
Open View of Your Phone  
The following diagram shows the main elements of your phone.  
1
2
3
13  
12  
4
11  
5
10  
6
7
9
8
1. Earpiece: Allows you to hear conversations, ring tones and alerts.  
2. Display: Allows you to view date and time, network type, signal strength,  
battery power, and icons associated with alerts or alarms.  
10  
   
3. Navigation key: Allows you to scroll through menus and adjust the volume during a  
call. In Idle mode your Navigation key provides a shortcut to your Contact List, Camera,  
your Sound Profile settings and your SMS message window.  
4. Left soft key: In the Idle screen, press the Menu (left) soft key ( ) to access  
your Main menu. The left soft key allows you to select the function indicated  
by the screen text on the bottom left of the display.  
5. Send key: Allows you to place or receive a call. In standby mode, press the  
key once to access the Recent Calls log. If you press and hold the key down,  
you will initiate the most recent call from the Recent Calls log.  
6. Alphanumeric keys: Allows you to enter numbers, characters and symbols.  
7. Star key: Press and hold to enter a pause when dialing.  
8. Microphone: Allows the other callers to hear you when you are speaking.  
9. Space/Silent key: Allows you to enter a space when entering text. Press and  
hold to toggle between Normal and Silent modes.  
10. Back/Clear key: deletes characters from the display. In Menu mode, returns  
to the previous menu level. In Idle mode, launches your Calendar.  
11. Power On/Off/Menu Exit key: Ends a call or exits a program. Press and hold  
this key briefly to power your phone On or Off. While in the main menu, it  
returns the phone to standby mode. Press to reject an incoming call.  
12. Right Soft key: In the Idle screen, press the Browser (right) soft key ( ) to  
launch the Browser. The right soft key allows you to select the function  
indicated by the screen text on the bottom right of the display.  
13. OK (Select) key: allows you to confirm your menu choices. In Idle mode,  
press  
to access the Prepaid menu.  
Understanding Your Phone  
11  
Main Display Layout  
The display has 3 areas:  
Icons  
Text and  
graphics  
Soft key  
functions  
Icons  
Showsthereceivedsignalstrength. Thegreaternumber  
of bars indicates a stronger signal.  
Appears when you receive a new text message.  
Appears when you receive a new picture message.  
Appears when you receive a new voicemail message.  
Appears when you set an alarm on your phone.  
12  
 
Appears when a call is in progress.  
Appears when there is no network coverage available.  
When you are out of the service area, you cannot make  
or receive voice calls.  
Shows the level of your battery. The more bars you see,  
the more power you have remaining.  
Note: The default Sound Profile is Normal. The profile is editable, and the displayed icons may  
vary according to the settings. To edit Sound Profile settings, press Menu  
Settings  
Sound Profile  
.
Appears when the Normal Profile (default) is active.  
Press and hold the Space key to toggle between  
Normal mode and Silent mode. You can edit these Normal  
profile settings.  
Appears when the Silent Profile is set. In Silent mode,  
your phone displays information, but the speaker is  
muted and the phone vibrates to alert you. You can edit  
these Silent profile settings.  
Understanding Your Phone  
13  
Appears when the Profile is set to Driving. In Driving  
mode, the speaker is active and launches the currently  
selected ringtone or melody when the associated  
notification is activated. This icon is accompanied on  
screen by the Audio icon. You can edit these Driving  
profile settings.  
Appears when the Profile is set to Outdoor. In this case,  
the speaker is active, the volume settings are raised to  
their highest levels, any currently active ringtones or  
melodies are activated, and the phone’s vibrate feature  
is activated. You can edit these Outdoor profile settings.  
Backlight  
A backlight illuminates the display and the keypad when you press any key. The  
backlight dims or turns off when no key is pressed within a given period of time.  
Go to the Backlight Time menu to modify these settings.  
Press Menu  
Settings  
Display  
Light Settings  
Backlight Time.  
Selecting Functions and Options  
Your phone offers a set of functions that can be customized for your use. These  
functions are arranged in menus and sub-menus. Each menu and sub-menu allows  
you to view and alter the settings of a particular function.  
In some functions, you may be asked for a password or PIN. Enter the code and  
press the  
key.  
When you access a list of options, your phone highlights the currently active option.  
If there are only two options, such as On/Off, your phone highlights the option that  
is not currently active, so that you can select it directly.  
14  
 
Selecting Options  
To view the various functions and options available and to select the one you want:  
Press the appropriate soft key.  
To select the function displayed or the option highlighted, press the Select soft key or the  
key.  
To view the next function or highlight the next option on a list, press the Down Navigation  
key.  
To move back to the previous function or option on a list, press the Up Navigation key.  
To move back up one level in the menu structure, press the Back soft key.  
To exit the menu structure without changing the settings, press the  
key.  
Soft Keys  
The roles of the left and right soft keys vary depending on the function you are  
currently using. The active function for each soft key is shown at the bottom of the  
display above each key.  
Left Soft Key  
Some functions of the left soft key are as follows.  
In the Idle screen, press the Menu (left) soft key  
When in a menu mode, the left soft key  
to open the Menu screen.  
.
function is Select  
Right Soft Key  
Some functions of the right soft key are as follows.  
In the Idle screen, press the Browser (right) soft key  
to launch the Browser.  
When in a menu mode, the right soft key  
function is Back  
.
Understanding Your Phone  
15  
End Key  
The End key  
is used to turn on/off your phone, disconnect calls, and return to  
the standby mode.  
Press and hold the End key to turn on/off your phone.  
Briefly press  
Press  
once to disconnect a call.  
to return to standby mode from any menu.  
Send Key  
The Send key  
is used to answer calls, dial calls, and to recall the last  
number(s) dialed, received, or missed.  
Press  
once to answer calls.  
Enter a number and briefly press  
to make a call.  
Briefly press  
Press  
in standby mode to display a list of recent calls to and from your phone.  
twice in standby mode to call the most recent number.  
to pick up a waiting call.  
Press  
Navigation Key  
Use the directional keys on the Navigation key to browse menus, sub menus, and  
lists. Press the Up or Down Navigation keys when jumping to highlighted links on  
the web. In a call, press the Up or Down Navigation keys to adjust the speaker  
volume.  
In the Idle screen, the Navigation keys provide shortcuts to launch applications.  
SMS  
Camera  
Sound Profile  
Contact List  
16  
Section 3: Call Functions  
This section describes how to make or answer a call. It also includes the features  
and functionality associated with making or answering a call.  
Making a Call  
In Idle mode, enter the area code and phone number, and press the  
key.  
Making an International Call  
1. Press and hold  
. The + character appears.  
2. Enter the country code, area code, and phone number, then press  
.
Ending a Call  
When you want to finish your call, briefly press  
.
Manual Pause Dialing  
When you call automated systems, you are often required to enter a password or  
account number. Instead of manually entering the numbers each time, you can dial  
the numbers along with special characters called pauses.  
To manually call a number with pause(s) without storing it in your Contact List:  
1. In Idle mode, enter a phone number.  
2. Press and hold the  
key to add a two-second pause. The letter appears  
P
where the pause is set.  
3. Continue to enter numbers, if desired.  
Tip: You can create pauses longer than two seconds by entering multiple pauses.  
Call Functions  
17  
   
Redialing the Last Number  
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the  
number or caller is listed in your Contacts, the associated name displays. For more  
information about Recent Calls, see “Recent Calls” on page 19.  
To redial the number of your last call:  
1. From the Idle Screen, press Menu Recent Calls. The Recent Calls menu  
displays the All Calls list with the number of your last call highlighted.  
Tip: You can quickly access your Recent Calls from the Idle Screen by pressing  
.
2. Press  
to dial the number of your most recent call.  
Making a Call from your Contact List  
You can store phone numbers that you use regularly on the SIM card or in the phone  
memory. These entries are collectively called the Contact List. Highlight a number in  
your Contact List and press  
to call.  
Answering a Call  
When a call is received the phone rings and displays the caller phone number or  
name, if stored in the Contact List.  
1. To answer from the Idle Screen, press  
.
Note: To set your phone to answer when you flip it open or when you press any key, press  
Menu  
Settings  
Calls  
General  
Call Answer and select your option. When you  
activate the Any Key answer option, you can press any key to answer a call except  
and  
the Reject soft key.  
2. End the call by pressing  
.
Note: You can answer a call while using the Contact List or menu features. After ending the call,  
the phone returns to the function screen you were using.  
18  
   
Recent Calls  
The phone stores the numbers of the calls you have Missed, Received or Dialed in  
the Recent Calls menu. You can quickly access this menu from the Idle screen by  
pressing the  
key. If the number or caller is listed in your Contact List, the  
associated name displays. Press the Right or Left Navigation key to review All  
Calls, Missed Calls, Calls Made and Calls Received in the Recent Calls menu.  
To access the Recent Calls menu:  
1. From the Idle Screen, press Menu Recent Calls. The Recent Calls menu  
displays the All Calls list with the number of your last call highlighted.  
Tip: You can quickly access your Recent Calls by pressing  
.
2. Use the Navigation keys to scroll through the Recent Calls lists. Choose from  
All Calls, Missed Calls, Calls Made and Calls Received.  
3. Press the Options soft key in any of these lists for the following options:  
• Details: allows you to view the call details.  
• Call Back: allows you to call the number you are viewing.  
• Save to Contacts: allows you to save a new contact or update an existing contact.  
• Send Message: allows you to send a text message or a multimedia message.  
• View Contact Details: allows you to view the contact details stored in your Address Book.  
• Delete: allows you to delete the selected call record or all call records.  
• Add to Reject List: allows you to add the sending number to your Reject List, where  
incoming calls are sent direct to voice mail.  
Call Functions  
19  
 
Viewing Missed Calls  
The number of calls you have missed is displayed on the Idle screen.  
To view the number details:  
1. Press the View soft key. The most recently missed call is displayed.  
Note: If there is a voicemail sent by the same number, associated icons are displayed and can then  
be selected.  
2. To scroll through the list of missed calls, press the Up or Down  
Navigation key.  
3. To move to another call type, press the Left or Right Navigation key.  
Viewing the Details of a Missed Call  
To view the details of a selected missed call, use the following steps:  
1. Press the View soft key. A list of the most recently missed calls is displayed.  
2. Select the desired missed call.  
3. Press the Options soft key, then select Details.  
Calling Back a Missed Call  
To call back a missed call number:  
1. Press the View soft key. A list of the most recently missed calls is displayed.  
2. Highlight the desired missed call.  
3. Press the Options soft key, then select Call Back  
.
– or –  
Highlight the number and press the  
key.  
20  
Saving a Missed Call to your Address Book  
To save the missed call entry to your address book, use the following steps:  
1. Press the View soft key. A list of the most recently missed calls is displayed.  
2. Select the desired missed call.  
3. Press the Options soft key, then select Save to Contacts and follow prompts  
to add caller to Contact List.  
Sending a Message to a Missed Call  
To send a text message or attachment to a missed call entry:  
1. Immediately after missing a call, press the View soft key. A list of missed  
calls is displayed with the most recently missed call highlighted. Highlight the  
number of the missed call you wish to send a message.  
2. Press the Options soft key, then select Send Message. Select Text Message  
or Multimedia Message. The Create Message screen displays. Create your  
3. When you completed your message, press the Send To soft key place the  
selected number in the list of Recipients.  
4. Press the Options soft key and select Contact List, Recent Recipient or  
Group to add other recipients from these lists.  
5. When the Recipients list is completed, press the Send soft key to send your  
message. Your display returns to the Recent Calls list.  
Call Functions  
21  
Deleting a Missed Call  
To delete a missed call entry:  
1. Immediately after missing a call, press the View soft key.  
2. Press the Options soft key, then select Delete. Select the option to delete the  
Selected missed call or All missed calls. The selected call log(s) are deleted  
after you confirm, Yes or No.  
Call Time  
From the Idle screen, press the Menu Recent Calls Call Time to see the  
following options:  
Last Call Time: shows the length of time for the last call.  
Total Made: shows the total length of time for all calls made.  
Total Received: shows the total length of time for all calls received.  
Options During a Call  
Your phone provides a number of control functions that you can use during a call.  
Adjusting the Call Volume  
Adjust the speaker volume during a call by pressing the Up and Down Navigation  
keys. Press the Up Navigation key to increase the volume level and press the Down  
Navigation key to decrease the volume level.  
Putting a Call on Hold  
You can place the current call on hold whenever you want. You can also make  
another call while you have a call in progress if your network supports this service.  
To put a call on hold:  
1. While on a call, press Options Hold to place your call on hold.  
2. You can later reactivate this call whenever you want by pressing the Resume  
soft key.  
22  
   
Making a new call while you have a call in progress  
1. While on a call, press Options Hold.  
2. Enter the new phone number you wish to dial.  
3. Press  
to dial the second number.  
- or -  
Press the Options soft key, then select New Call. Enter the number to call  
or search in your Contact List. Press to dial the second number.  
Once connected, both calls are displayed on the screen.  
Note: The caller currently on hold appears greyed-out onscreen.  
Switching between the two calls  
1. Press Options Swap. The current call (caller #2) is placed on hold and the  
previous call on hold (caller #1) is then reactivated so that you can continue  
conversing with that person.  
2. Press  
to end the currently active call.  
3. When you want to finish, end each call normally by pressing the  
key.  
Ending a specific call  
1. Place the call you wish to end on hold.  
2. Press Options End Held call.  
3. Press the Select soft key to end the call on hold.  
4. Press  
to end the last remaining call.  
Call Functions  
23  
In-Call Options  
During a call, press the SpkOn/SpkOff key to turn the Speaker On or Off.  
Press the Options soft key to access the following:  
Hold: Places the active call on hold.  
New Call: Places the current call on hold and then allows you to enter and dial another  
number or access your Contact List.  
Contact List: allows you to access your Contact List.  
Message: Create Text Message, My Messages  
Calendar: Allows you to access your Calendar.  
Mute Keypad Tone: Silences/mutes the key tones when on the call. To turn this feature off  
(unmute the keypad), return to this option and select Send Keypad Tone  
.
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you have  
selected. These DTMF tones are sent as a group. The DTMF tones are the tones used in  
phones for tone dialling, sounding when you press the number keys. This option is helpful  
for entering a password or an account number when you call an automated system, like a  
banking service.  
Using the Speakerphone During an Active Call  
While in an active call, you can enable the speakerphone feature.  
During a call, press the SpkOn key to activate the speakerphone. Press  
SpkOff to deactivate.  
Muting or Sending Keypad Tones  
These options allow you to turn the key tones off or on. If the Mute Keypad Tone  
option is selected, it allows you to press keys without hearing key tones during  
a call.  
Note: To communicate with answering machines or computerized telephone systems, the Send  
Keypad Tone option must be selected.  
24  
Switching off the Microphone (Mute)  
During a call, you can temporarily switch your phone microphone off so that the  
other person cannot hear you. Press the Mute/Unmute soft key.  
Searching for a Number in Address Book  
You can search for a number from the Address Book during a call.  
1. Press the Options soft key, then select Contact List.  
2. Highlight the Contact List entry.  
– or –  
Enter the first few letters of the contact into the Search field to highlight the  
closest match.  
3. Press Options View or  
to view your selected contact.  
Call Waiting  
The Call Waiting feature alerts you of an incoming call while you have a call in  
progress, if this service is supported by the network.  
To activate the Call waiting feature, press Menu Settings Calls ➔  
Voice Call  
Call Waiting Voice Call Activate.  
To answer a call while you have a call in progress:  
1. While on a call, press  
or press the Accept soft key to answer a new  
incoming call. The first call is automatically put on hold when you answer the  
new incoming call.  
2. To switch between the two calls, press Options Swap. Swap places the  
current call on hold and then activates the previous call.  
Call Functions  
25  
 
To end a call on hold:  
1. Press the Options soft key, then select End Held Call. You can continue with  
the remaining call.  
2. Press  
to end the current active call.  
3-Way Calling (Multi-Party Calling)  
The 3-Way or Multi-Party feature allows you to answer a series of incoming calls  
and place them on hold.  
If this service is supported by the network, and the SIM has the feature enabled, all  
calls can be joined together. You are notified of an incoming call by a call waiting  
tone. To activate the call waiting feature, see “Call Waiting” on page 25.  
1. Press  
or Accept to answer the first incoming call.  
2. Press  
or Accept to answer the next incoming call. The first call is  
automatically put on hold.  
3. Press to join with both of your callers, the active call and the  
call on hold, in a single multi-party call.  
4. Press to end the call.  
26  
Silent Mode  
Silent mode is convenient when you wish to stop the phone from making a sound, in  
a theater, for example.  
In Idle mode, press and hold  
message appears on screen. The Silent mode icon  
until the phone vibrates, the “Silent profile on”  
is displayed on the screen.  
In Silent mode, your phone speakers are muted. An incoming call causes the phone  
to vibrate and light up, depending on the settings of the Silent Phone Settings  
feature.  
To exit and reactivate the previous sound settings, press and hold  
again until  
the previous Sound Profile is restored. The Silent mode icon is no longer displayed.  
Call Functions  
27  
 
Section 4: Menu Navigation  
This section explains the menu navigation for your phone. Your menu options are  
controlled by the SIM provided by your service provider.  
Use the Navigation keys to scroll through menus and sub-menus or use the shortcut  
keys.  
Accessing Menus  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Use the Navigation keys to scroll to a main menu. Press the Select soft key or  
the  
3. If the menu contains sub-menus, highlight your menu selection and press the  
Select soft key or  
4. To return to the previous menu level, press the Back soft key.  
key to enter the menu.  
.
5. To exit the menu without changing the settings, press  
.
Using Shortcuts  
Numbered menu items and options can be accessed by using their shortcut  
numbers. In Menu mode, Main Menus can be accessed by pressing the number  
keys (1 to 9) corresponding to their location on the screen.  
Example: Accessing the Language menu.  
1. Press the Menu soft key.  
2. Press  
3. Press  
4. Press  
for Settings.  
for Phone  
for Language.  
28  
     
Section 5: Messages  
This section describes how to send or receive text messages.  
Creating a New Text Message  
1. In Idle mode, press Menu Messages Create New Message  
Text Message to access the SMS message window.  
Tip: In Idle mode, to create an SMS message, press the Up Navigation key.  
2. Compose your message text.  
3. You can press the Options soft key to choose from the following options:  
Insert: Allows you to insert information from the following sources: Text Templates,  
Contact List, Favorites URL.  
Save to: Allows you to save your message to your Drafts folder or to My Folder.  
Select Language: Allows you to choose from these languages: English or Español.  
Input Mode: Allows you to set the text Input method: ab, Ab, AB, T9ab, T9Ab, T9AB,  
123 or Symbols.  
Back: Asks you if you want to Save to Drafts? Yes or No, or deletes your unsent message  
and returns to the Massaging display.  
4. When you completed your message, press the Send To soft key to display the  
Recipients To field.  
5. Enter the number for the recipient in the field provided, or press the Options  
soft key to select a recipient from your Contact List, your Recent Recipients  
phone number or email, or from one of your Group contacts.  
– or –  
You can select Save to: to save your unsent message to Drafts or My Folder.  
6. Press Send to send your message.  
Messages  
29  
     
Creating a New Picture Message  
1. In Idle mode, press Menu Messages Create New Message  
Multimedia Message. The New multimedia message screen displays with  
the Subject field highlighted.  
2. To create a subject for your message, press Options Add. Enter the  
Subject text using the keypad. Press Options Save.  
3. Press the Down navigation key to highlight the Graphic field.  
4. To add a graphic to your message, press Options Add and select Take  
Photo, My Photos, or Downloaded Graphics.  
5. Select My Photos to see thumbnail images of your photos.  
6. Highlight the photo you wish to add and press the Add soft key. The New  
multimedia message screen appears in the display with the selected photo in  
the Graphics field.  
7. Press the Down navigation key to highlight the Audio field.  
8. To add audio to your message, press Options Add and select Record  
Audio, Recorded Audio, or Downloaded Tones.  
9. Record a new audio file or select an existing file or downloaded tone. Press  
the Add soft key.  
10. Press the Down navigation key to highlight the Message field.  
11. To add a text message to your multimedia message, press Options Add.  
Enter the message text using the keypad. Press Options Save. The New  
multimedia message screen appears in the display with your entries.  
30  
   
12. When you are finished with your message, you can press the Options soft key  
to make changes, additions, edits such as background color, add a business  
card or other attachments, modify send settings and preview your message.  
– or –  
Press the Send To soft key. The Send screen appears in the display showing  
the To list.  
13. Enter your recipient and press Send to send your message.  
– or –  
Press the Options soft key to choose from other options such as add  
recipients from you contact list or groups, from recent recipients, or save to  
drafts or to My Folder.  
Viewing Received Messages  
1. In Idle mode, your phone displays the number of voicemails you have  
received and the number of new messages you have received.  
2. Press the Connect soft key or the  
key to call your voicemail and listen to  
key to view your messages.  
your messages.  
– or –  
Press the View soft key or the  
3. When you have finished, press the Exit soft key or the  
key.  
Using Message Options  
Message options at the Inbox level differ according to the message type, what you  
have done with the message, and whether you are viewing the message.  
While viewing the list of messages in the Inbox, you can highlight a message and  
press the Options soft key to access the following message options:  
Messages  
31  
   
View: Allows you to view your message.  
Call Back: Returns the call.  
Delete: Deletes a single selected message or you can select multiple messages for deletion.  
Move to My Folder: Allows you to move the selected message to My Folder.  
Move to SIM Card/Phone: Allows you to move the selected message to your SIM Card or  
to your phone.  
Sort by: Allows you to sort your messages by date, read/unread, sender, type, size  
or subject.  
Lock/Unlock: Allows you to lock or unlock the deletion of the highlighted message.  
While viewing a message in the Inbox, press the Options soft key to access the  
following message options:  
Reply: Allows you to compose and send a reply to the message.  
Call Back: Returns the call.  
Forward: Allows you to forward the message to another recipient.  
Delete: Deletes the viewed message.  
Move to My Folder: Allows you to move the selected message to My Folder.  
Move to SIM Card/Phone: Allows you to move the selected message to your SIM Card or  
to your phone.  
Add to Block List: Allows you to add the sender or caller to a block list.  
Extract Address: Allows you to extract the address to add to your contacts or send a reply.  
Lock/Unlock Allows you to lock or unlock the deletion of the highlighted message.  
:
Inbox  
The Inbox message box stores copies of messages you received.  
Outbox  
The Outbox stores copies of outgoing messages, both those sent successfully and  
those that failed.  
32  
   
Sent  
The Sentbox message box stores copies of messages you sent.  
Drafts  
The Drafts message box stores unsent messages that you want to edit or send at a  
later time.  
Voicemail  
Choosing this option dials your voicemail.  
My Folder  
You can elect to store messages in My Folder.  
Templates  
Templates are available for creating messages and can be edited or deleted.  
Using Message Templates  
Your phone has Text templates that you can retrieve and apply when creating a  
message. You can edit the applied template as needed before sending a message.  
1. In Idle mode, press the Menu Messages Templates. The Text  
Templates display.  
2. Highlight a current template message and press the Options soft key to  
access the following options:  
• Send via: allows you to create and send a Text Message/Multimedia Message using the  
selected template.  
• Edit: allows you to change the currently selected template.  
• Delete: deletes the currently selected template or multiple templates.  
3. When you have finished, press  
.
Messages  
33  
         
Delete All  
The Delete All function allows you to clear messages you no longer wish to store.  
You can delete the messages in the selected message folder(s) or you can choose  
to delete all messages at one time.  
Messaging Settings  
The Messaging Settings menu allows you to view and modify settings for text  
messages, multimedia messages, voicemail and, if allowed by your service  
provider, broadcast messages.  
You can set up various options for using messaging services.  
1. In Idle mode, press Menu Messages Messaging Settings.  
2. Select the message settings you want to change.  
Text Message  
• Multimedia Message  
Number, Message Class, Creation Mode and Default Style.  
• Voicemail allows you to Connect to Voice Server.  
• Broadcast Message: available only if allowed by your service provider.  
:
allows you to access Send Settings and Block Number list.  
:
allows you to access Send Settings, Receive Settings, Block  
:
3. Press the Select soft key or  
to access the highlighted settings menus.  
4. Press Save when finished.  
Text Message  
The following options are available:  
Send Settings: displays the Email Gateway set by your service provider.  
Block Number: allows you to create a block number list.  
Multimedia Message  
Send Settings: allows you to set Priority, Expiration, Delivery After options.  
Receive Settings: allows options to Reject Anonymous messages and Allow  
Advertisement.  
34  
   
Block Number: allows you to create a block number list.  
Message Class: allows you to choose a setting: Text, Image Basic or Image Rich.  
Creation Mode: allows you to choose a setting: Warning, Free or Restricted.  
Default Style: allows you to choose: Font Color, Font Size, Bold, Italic, Underline,  
Strikethrough, Background Color and Page Duration  
Voicemail  
The following options are available:  
Connect to Voice Server: connects you to your voice server.  
Broadcast Message  
Broadcast Message displays if allowed by your service provider.  
Used Space  
Used Space shows the number of messages stored on your phone and on your  
SIM Card.  
Text Message: displays the number of messages stored at these locations: Phone, SIM,  
Inbox, Sent, Outbox, Drafts, My Folder.  
Multimedia Message: displays the space Available, and the space used in these locations:  
Inbox, Sent, Outbox, Drafts, My Folder.  
Push Message: displays the number of push messages stored.  
Messages  
35  
 
Section 6: Browser  
This section outlines how to launch your Browser, how to navigate to other pages  
on the Web, and how the keys on the keypad are used with the Web application.  
You can surf the Web and download ringtones and wallpapers using your phone.  
Launching the Browser  
In standby mode, press the Right soft key to launch the Browser. A list of  
categories, each representing one or more web sites, appears in the display.  
Exit the Browser  
To exit the Browser, press  
.
Using the Browser  
When you use your Browser to access the Web, some of the keys operate differently  
than during a normal phone call. You can act upon options or links by using the soft  
keys.  
Soft Keys  
The bottom of the display shows browser commands above the Left and Right soft  
keys used to execute the commands. The soft keys change their function  
depending on the application.  
Using Links  
Links have several purposes, such as jumping to a different page, to a different  
site, or even initiating a phone call. Links are shown underlined. You can normally  
press  
to select a link when it is highlighted.  
36  
       
How the Web Keys Work  
The following table lists the Web keys and their functions.  
Navigation keys — Use to browse lists and options.  
Back Key — A browse, back-up key. Press once to back up one page. Press and hold to go  
back to home page. Press to clear the last number, letter, or symbol entered. Press and hold  
to completely clear the display.  
Pound Key — Press to insert a space when entering text.  
Number 1 thru 9 — Use the number keys to select items in a menu if they are numbered.  
End Key — Press to exit the Web and return the phone to standby mode.  
Left Soft Key — Press to activate the command that appears above it in the display. The  
Options soft key provides these options: Go to, Back, Go to Homepage, Reload, Send URL,  
Enter URL, Add to Favorites, View Favorites, Go to Messaging, Go to My Folder, Disconnect,  
History, Show URL, Delete Cookies and About Browser.  
Right Soft Key — Press to activate the command that appears above it in the display.  
Browser  
37  
 
Section 7: Camera  
This section explains how to use the camera on your phone. You can take  
photographs by using the built-in camera functionality.  
Using the Camera  
Using the camera module in your phone, you can take photos of people or events  
while on the move. Additionally, you can send these photos to other people in a  
Picture Messaging message or set a wallpaper or picture ID image.  
Note: Do not take photos of people without their permission.  
Do not take photos in places where cameras are not allowed.  
Do not take photos in places where you may interfere with another person’s privacy.  
Taking a Photo  
Your camera produces photos in JPEG format. To take a photo using the current  
camera settings, do the following:  
Note: When you take a photo in direct sunlight or in bright conditions, shadows may appear on  
the photo.  
1. In Idle mode, press Menu  
Camera  
Take Photo. The following soft key  
options appear:  
• Menu: allows you to adjust camera settings. For more information, refer to “Setting  
• Take Photo  
(
): allows you to take a photo.  
• Gallery: allows you to view your stored photos.  
2. Using the display as a viewfinder, point the camera lens on the back of your  
phone at your subject. When the image you wish to capture appears in the  
display, press  
(
). You photo is saved to the My Photos folder.  
38  
     
3. After taking a photo, the following options are available while viewing  
the photo:  
• Options: allows you to select Take Another  
,
Send via Multimedia Message, and Set as  
Wallpaper or Caller ID.  
• Send: allows you to go to New Multimedia Message screen. For sending a Multimedia  
• Delete: press the right soft key (Delete) and confirm Yes to delete or No to keep  
the photo.  
Setting Camera Options  
The Camera Options let you adjust default camera settings to suit the current  
conditions and subject of your photo. The following settings are available.  
Shooting Mode: only selection is Single Shot mode, which allows you to take a single shot  
and view it before returning to the shooting mode or to take a single shot and return to  
camera mode without reviewing. To change this option, refer to Single Shot in the Settings  
Resolution: select from the following image sizes: 640 x 480  
128 x 96  
Timer: select from the following time intervals to delay before taking a picture: Off  
3 Seconds 5 Seconds 10 Seconds  
White Balance: select from the following choices to adjust to the available light: Auto  
Daylight Incandescent Fluorescent Cloudy. The viewfinder in your display shows the  
effects of the settings.  
Effects: select from the following: No Effects  
Emboss Sketch Antique Moonlight. The viewfinder in your display shows the effects  
of the settings.  
Information: displays 1 Timer and # Viewfinder Mode  
,
320 x 240, 128 x 128,  
.
,
,
,
.
,
,
,
,
,
Black & White, Negative, Sepia,  
,
,
,
.
Settings: select from General and Camera settings: General (Zoom Sound,  
Brightness Sound), Camera (Shutter Sound, Viewfinder Mode, Scene Program,  
Metering Exposure, Single Shot).  
Camera  
39  
   
Viewing Photos  
1. In Idle mode, press Menu  
Camera  
Go to My Photos. Your photos display  
in Line View or Thumbnail View.  
– or –  
In Camera mode, press the right soft key (Gallery) to access My Photos.  
2. In the My Photos screen, press Options to see the following:  
• View: allows you to enlarge the thumbnail view of the selected photo.  
Note: While viewing a photo, press Options  
Full Screen View to view the image in full screen. To  
Normal View.  
return to normal view, press Options  
• Display Mode: allows you to select Line View or Thumbnail View.  
• Send: allows you to send the selected photo via Multimedia Message.  
• Set as: allows you to set the selected photo as Wallpaper or Caller ID.  
• Delete: allows you to delete a selected photo or multiple selected photos.  
• Rename: allows you to rename the selected photo.  
• Slide Show: allows you to play the available images in My Photo in a slide show.  
• Lock/Unlock: allows you to lock or unlock a photo file.  
• Properties: allows you to view these properties: Name, Date, Format, Resolution, Size,  
Quality and Lock/Unlock settings.  
40  
 
Section 8: Applications  
A number of preloaded applications are available on your phone. These are some of  
the applications available from the Tools menu, the Calendar menu and the My Stuff  
menu: Alarms, Calculator, Tip Calculator, Converter, Timer, Stopwatch, World Time,  
Calendar, default and downloaded Audio and Picture.  
Tools  
The Tools menu provides access to: Alarms, Calendar, Calculator, Tip Calculator,  
Converter, Timer, Stopwatch and World Time. Some of these applications are  
described in this section.  
Opening Tools Menu  
In Idle mode, press Menu Tools. The following submenus display:  
Alarms: Allows you to set an alarm to go off once, or daily, at a specified time.  
Calendar: Your Calendar applications allows you to enter events and view them by the day,  
the week, the month or by event categories.  
Calculator: Allows you to perform calculations, including addition, subtraction,  
multiplication, and division.  
Tip Calculator: Allows you to calculate service gratuities with a minimum of key presses.  
Converter: Allows you to convert currency, length, weight, volume, area and temperature  
from one system or increment to another.  
Timer: Allows you to set a timer.  
Stopwatch: Allows you to view the amount of time in up to 30 intervals.  
World Time: Allows you to view the current time of day or night in another part of the world.  
Applications  
41  
   
Alarms  
You can set an alarm to alert you once, or daily at a specified time. Once set, the  
alarms are easy to change or turn off completely.  
1. In Idle mode, press Menu Tools Alarms. The following options appear  
in the display:  
• Wake-up Alarm  
Alarm 1  
Alarm 2  
• Alarm 3  
Alarm 4  
2. Select an Alarm. The alarm screen appears in the display containing the  
following options: the alarm name, the on/off setting, the time, AM/PM, alert  
type, alarm tone options, the alarm volume setting, days if the week to sound,  
snooze option and auto power on/off setting.  
3. Highlight the options you wish to change, then select values for the options  
using the Left and Right navigation keys.  
4. When you’re finished entering and selecting values for the alarm, press  
.
The alarm is set and the alarm icon ( ) appears in the top of the display.  
Calendar  
Your Calendar applications allows you to enter events and view them by the day, the  
week, the month or by event categories. While viewing the calendar, the current  
date is highlighted and days with scheduled events are marked by a bracket.  
42  
Calendar Options  
You can add and delete events and set alarms to remind you of your appointments,  
anniversaries or other events. In Calendar view, press the Options soft key to choose  
from the following:  
View by: Allows you to choose the calendar view: Day, Week or Month.  
Create: Allows you to choose the category for your new event: Appointment, Anniversary,  
Miscellaneous, Task,  
Go to: Allows you to view the current day’s calendar or to jump to another date that you  
specify: Today, Date  
Event List: Allows you to view your events by category: Appointment, Anniversary,  
Miscellaneous, Task,  
Delete: Allows you to delete your selection by a specified range of dates or by the month or  
to delete all events: Selected, Periods, This Month, All  
Settings: Allows you to choose your calendar Starting Day: Monday or Sunday, and to  
choose Default View by: Month, Week, Day.  
Missed Alarm Event: Allows you to view any missed alarm events.  
Used Space: Allows you to view the total number of events stored on your Calendar, up to  
100 and the number of events by category: Appointments, Anniversaries, Miscellaneous,  
Tasks  
Enter an Event  
1. To access your Calendar in Idle mode, press Menu Tools Calendar  
.
– or –  
Press  
.
2. Press the Options soft key and select Create.  
3. Select from the following options: Appointment, Anniversary, Miscellaneous  
or Task.  
4. Enter your information in the fields provided in your phone display.  
Applications  
43  
View an Event  
1. To access your Calendar in Idle mode, press Menu Tools Calendar.  
2. Use the Navigation keys to move through the calendar and highlight a desired  
date.  
3. Open the highlighted date by pressing . A list of scheduled events appears  
in the display.  
4. Select the desired event. Information for the selected event appears in the  
display.  
Calculator  
You can perform calculations, including addition, subtraction, multiplication, and  
division using the phone.  
In Idle mode, press Menu Tools Calculator to display your calculator.  
Tip Calculator  
Tip Calculator calculates your gratuity and the individual payment for groups.  
Calculations are based on the total amount of the check, a selected percentage, and  
the number of people paying.  
1. In Idle mode, press Menu Tools Tip Calculator to display the Tip  
Calculator screen with the Bill field highlighted.  
2. Use the keypad to enter the total amount of the bill. To include a decimal  
point, press the  
key.  
3. If needed, highlight the Tip field and use the keypad to change the tip  
percentage.  
44  
4. If needed, highlight the # paying field and use the keypad to change the  
number of persons paying.  
5. The amount of the tip, the bill total, and the amount owed by each person  
appears in the lower half of the screen.  
Converter  
The conversion menu provides the following conversion features: currency, length,  
weight, volume, area and temperature.  
To convert a currency, length, weight, volume, area, or temperature, do the  
following:  
1. In Idle mode, press Menu Tools Converter to display the Converter.  
2. Select the conversion feature you wish to use. The selected conversion  
feature screen appears in the display.  
3. Use the Left and Right navigation keys to select the unit to convert from.  
4. Highlight the quantity field.  
5. Use the keypad to enter the quantity you want to convert.  
6. Highlight the field to enter the unit of measure to convert to.  
7. Use the Left and Right navigation keys to select the desired units. The  
converted quantity displays in the new quantity field.  
Note: To include a decimal point, press  
.
Applications  
45  
Currency — Reviewing/Editing Exchange Rates  
The Currency Converter includes long-term average exchange rates as default  
values. To review and/or change a default exchange rate to the current exchange  
rate, do the following:  
1. In Idle mode, press Menu Tools Converter Currency to display the  
Converter screen with the USD (U.S. Dollars) currency highlighted in the From  
Unit field. Use the Left and Right navigation keys to display a different  
currency in the From Unit field.  
2. Press Options Currency Rates. The Currency Rates list for the USD (U.S.  
Dollars) currency appears in the display.  
3. Select the currency exchange rate you want to change.  
4. To edit the highlighted exchange rate, press Options Edit  
.
5. Use the keypad to change the current exchange rate. Press the Save soft key  
to save the changed exchange rate.  
Currency — Adding Exchange Rates  
You can use the Currency Converter to convert from and to obscure currencies by  
adding exchange rates for these currencies. To add a currency and its exchange  
rate to the Currency Converter, do the following:  
1. In Idle mode, press Menu Tools Converter Currency to display the  
Converter screen with the USD (U.S. Dollars) currency highlighted in the From  
Unit field. Use the Left and Right navigation keys to display a different  
currency in the From Unit field.  
2. Press Options Currency Rates. The Currency Rates list for the USD (U.S.  
Dollars) currency appears in the display.  
46  
3. Press Options Add Currency.  
4. Enter the name in the Enter New Currency field and the rate in the Enter  
New Rate field. Press the Save soft key to save the new currency.  
Currency — Deleting Exchange Rates  
You cannot erase the preloaded currencies from the Exchange Rate list. You can  
erase a currency that you have added to the list by doing the following:  
1. In Idle mode, press Menu Tools Converter Currency to display the  
Converter screen with the USD (U.S. Dollars) currency highlighted in the From  
Unit field. Use the Left and Right navigation keys to display a different  
currency in the From Unit field.  
2. Press Options Currency Rates. The Currency Rates list for the USD (U.S.  
Dollars) currency appears in the display.  
3. Highlight the currency exchange rate to erase.  
4. Press Options Delete. You are prompted to confirm.  
Timer  
You can use this menu to set a timer.  
1. In Idle mode, press Menu Tools Timer.  
2. Press the Set soft key, set your time and press the OK key.  
3. Press  
to start, pause and resume the timer count down.  
Applications  
47  
Stopwatch  
You can use this menu to set a stopwatch.  
1. In Idle mode, press Menu Tools Stopwatch.  
2. Press  
to start the stopwatch count  
3. Press  
at the start of each succeeding event/lap to record the completion  
time for the previous event/lap.  
4. When finished, press the Stop soft key.  
5. Press the Reset soft key to erase all recorded event/lap times.  
World Time  
World Time lets you view the time of day or night in another part of the world. World  
Time displays time in the 24 different time zones around the world.  
1. In Idle mode, press Menu Tools World Time. A world map displays.  
2. To display the time zone and city that you wish to view, use the Left and Right  
navigation keys.  
3. Press the Set DST soft key to turn on or off daylight saving time.  
4. Press  
to keep the current home time zone and return to the Tools menu.  
48  
My Folder  
The My Folder menu allows you to manage downloaded and preloaded tones and  
graphics. You can store your files in the Audio and Picture folders and view the  
available memory in the Used Space display.  
In Idle mode, press Menu My Folder.  
Audio: allows you to customize your phone with downloaded or preloaded tones or your own  
recorded audio.  
Tones: allows you to launch your browser to Buy Ringtones, to save Downloaded Tones to  
your folder. You can play preloaded Default Tones and use these default tones and your  
downloaded ringtones to customize your phone.  
Recorded Audio: allows you to store your own audio files in your Recorded Audio folder.  
Picture: allows you to launch your browser to Buy Graphics, to save Downloaded Graphics  
to your folder. You can select one of seven preloaded Default Wallpapers to display or  
choose to display the seven wallpapers randomly. You can use these default wallpapers and  
your downloaded graphics to customize your phone.  
Buy Graphics: launches your browser where you can shop for graphics.  
Downloaded Graphics: folder for storing your downloaded graphics.  
My Photos: folder for storing your photos. Available options are: View, Display Mode, Send,  
Set as, Delete, Rename, Slide Show, Lock/Unlock and Properties.  
Default Wallpapers: allows you to choose from seven wallpapers to customize  
your wallpaper.  
Used Space: allows you to view the available memory in My Folder and the used memory in  
your Audio and Picture folders.  
Applications  
49  
 
Section 9: Understanding Your Contacts  
This section allows you to manage your Contacts by storing contacts’ names and  
numbers in your Contact List.  
Dialing a Number from the Contact List  
Once you have stored phone numbers in the Contact List, you can dial them easily  
by highlighting the number you wish to call and selecting Options Call.  
Finding a Contact List Entry  
You can store phone numbers and their corresponding names onto your SIM card.  
1. In Idle mode, press the Menu soft key, then select Contacts Contact List.  
2. Enter the first few letters of the name.  
The Contacts entries are then listed, starting with the first entry matching  
your input.  
3. To select a different entry, press the Up or Down Navigation key until the  
entry you want is highlighted.  
4. Once you have found the entry, press  
to dial the number, or press the  
Options soft key to access the Contact List entry options.  
Contact List Entry Options  
While in the Contact List with any of the entries highlighted, press the Options soft  
key to use access the following options:  
View  
to the Contact List.  
:
provides you with details about that contact entry. Press the Back soft key to return  
Send Message allows you to send a Text Message/Multimedia Message to the selected  
:
entry.  
Add New Contact  
:
allows you to add a new entry to either your Phone or SIM card.  
Call allows you to call a currently selected entry.  
:
50  
     
Copy to Phone/SIM Card: allows you to copy all or a selection to your Phone/  
SIM Card.  
Send Business Card: allows you to create a business card for your contact.  
Assign Speed Dial: allows you to assign a speed dial number to the selected contact.  
Delete: allows you to delete the selected contact, multiple contacts or all contacts from the  
Phone or the SIM Card or from both.  
Select Language: allows you to select English or Español.  
Adding a New Contact  
In the Idle screen, enter the number you wish to call and press Options ➔  
Save New. Select the type of number: Mobile, Home, Office, Fax or Other.  
At the prompt enter the name of the contact in the Name field.  
Also, you can create a new contact from the Idle screen by pressing Menu ➔  
Contacts Add New Contact. Enter the Name, number and other information in  
the fields provided to add the contact to your Contact List.  
Group  
You can elect to assign your contacts to a group or category, such as Family, Office,  
Friends, or Not Assigned. You can edit, delete or create new groups to manage your  
contacts. The Not Assigned group includes all contacts and can not be edited or  
deleted.  
Speed Dial List  
You can assign up to 8 speed dial number for your contacts entries. The first speed  
dial number is reserved for voicemail.  
In Idle mode, press Menu  
Contacts  
Speed Dial List. Select an Empty position  
in your speed dial list. Press the Options soft key, then select Add. When your  
Contact List displays, highlight the contact you wish to assign to that position  
and press  
to save.  
To quickly call a contact from the Idle screen, press and hold the number assigned  
in the Speed Dial List.  
Understanding Your Contacts  
51  
     
Reject List  
You can store and add numbers to your Reject List to immediately direct calls from  
those numbers to your voicemail.  
In Idle mode, press Menu Contacts  
Reject List to view your list. Press the  
Options soft key to Edit, Add New or Remove numbers from your list.  
You can enter a number to be rejected, select a number or multiple numbers from  
your Contacts, from a Group, from FDN Contacts, from Recent Contacts or you can  
elect to reject all Unknown numbers. You can later remove a selected number or all  
numbers from your reject list.  
FDN Contacts  
When the FDN (Fixed Dialing Number) mode is set to On, you can only dial the  
numbers in your Contacts that you have designated as FDN Contacts.  
Note: To set the FDN mode to on, in Idle mode, press the Menu Settings  
Set FDN Mode. Obtain Passcode from your Service Provider.  
Phone  
Security  
Contacts Settings  
You can choose to View contacts stored on your Phone only or on your SIM Card  
only. Or you can View All contacts. You can save, copy and delete Phone and SIM  
Card entries on your phone or choose to delete all.  
In Idle mode, press the Menu Contacts  
Contacts Settings to manage the  
following settings for your contacts entries:  
My Business Card: Allows you to enter your information in the fields provided to set  
up your business card.  
Save New Contacts to: Allows you to choose from these options: Phone, SIM Card  
or Ask on Saving.  
View Contacts from: Allows you to choose to view all contacts, the contacts from  
you phone only or from your SIM Card only.  
Sort Contacts by: Allows you to sort your contacts by first name or by last name.  
52  
       
Own Number: Displays you number assigned to your phone.  
Copy All to: Allows you to choose to copy all contacts to your phone or to your  
SIM Card.  
Delete All: Allows you to delete all contacts, to delete all contacts from your phone  
or to delete all from your SIM Card.  
Used Space: Displays the number of contacts stored on your phone and on your  
SIM Card.  
Own Number  
The Own Number menu selection stores the number assigned to the SIM in your  
phone. From the Idle screen, press Menu  
Contacts  
Contacts Settings  
Own Number to view your assigned number.  
Note: You can change the number assigned to your SIM that displays in the Own Numbers menu,  
but entering another number prevents you from making or receiving calls on the handset.  
You may also add other names and numbers into your phone for easy referral.  
SIM Management  
The SIM Management menu allows you to copy your stored contacts from your  
phone to your SIM, from your SIM to your phone and to delete contacts from your  
SIM.  
From the Idle screen, press Menu  
Contacts  
SIM Management and make your  
selection.  
Understanding Your Contacts  
53  
 
Section 10: Changing Your Settings  
This section includes tips on how to use some of use some of your phone features,  
as well as how to change and customize the display settings, call handling, security  
settings, and other settings associated with your phone.  
Sound Profile  
You can customize various sound profiles for your phone by changing the sound  
settings.  
1. In Idle mode, press the Menu Settings  
Sound Profile.  
2. Highlight one of the following sound profiles:  
• Normal: The Normal profile allows you to customize your alerts.  
• Silent: The Silent profile causes the speaker to be muted and the phone only  
vibrates or displays information on the LCD.  
• Driving: The Driving profile keeps the speaker active and will launch the  
currently selected ringtone or melody when the associated notification is  
activated.  
• Outdoor: The Outdoor profile keeps the speaker active, the volume settings are  
raised to their highest levels, any currently active ringtones or melodies are  
activated, and the vibrate feature is activated.  
3. Press the Edit soft key to Edit the highlighted profile.  
4. Press the Save soft key when you are finished.  
54  
     
Display  
The Display menu allows you to change settings for the Main Display, the Front  
Display and the Light settings. In Idle mode, press the Menu  
Settings  
Display.  
Main Display: Allows you to customize the appearance of your display and menus by  
making selections in Wallpaper, Idle Screen Display, Main Menu Style and Dialing Display.  
Front Display: Allows you to add a Clock and a Screen Slogan to your front display.  
Light Settings: Allows you to adjust LCD Brightness, Backlight Time and Front  
LCD Contrast.  
Time & Date  
This menu allows you to change the format for the current time and date display. In  
Idle mode, press the Menu Settings  
Time & Date.  
Phone  
The Phone settings menu allows you to set the language option for your phone to  
Automatic, English or Español and to turn on or off the Keypad auto-lock feature.  
In Idle mode, press Menu Settings  
Phone.  
Note: When the Keypad auto-lock feature is on, your phone automatically locks your keypad when  
the phone has been idle for a while. To unlock your phone, press the Unlock soft key, then  
press OK  
.
The following options are available. Use the Down Navigation key to scroll to and  
set options:  
Language  
:
Allows you to select a display language. Press the Save soft key to save your  
new selection. Options include the following:  
Automatic  
card used.  
English The selected phone language is changed to English.  
Español: The selected phone language is changed to Spanish.  
:
The language is automatically selected according to the language of the SIM  
:
Changing Your Settings  
55  
       
Shortcuts: Allows you to change the menus that display when you press the Navigation  
keys in Idle mode.  
Own Number: Displays the number assigned to your phone.  
Security: For information on phone security, see page 56.  
Reset Phone: Displays: All settings reset to factory defaults. Continue?  
Restore Phone: Displays: All settings reset to factory defaults and all user data will be  
deleted. Continue?  
Airplane Mode: Select On or Off to set your phone to Airplane Mode.  
T-Coil Mode: Turn On or Off T-Coil Mode.  
Security  
Security enables you to restrict the use of your phone by the others and to restrict  
the types of calls. Various codes and passwords are used to protect the features  
of your phone.  
Use the Up or Down Navigation key to scroll to and set the following options:  
Lock Phone: When enabled, the phone is locked and you must enter the 4- to 8-digit phone  
password each time the phone is switched on. Once the correct password has been  
entered, you can use the phone until you switch it off. The following options are available:  
Off  
On:  
:
you are not asked to enter the phone password when you switch on the phone.  
you are required to enter the phone password when you switch on the phone.  
Check PIN Code: Allows you to select Off or On.  
Set FDN Mode: Allows you to select Off or On. Obtain Passcode from your Service Provider.  
Change Phone Password Allows you to change your password to a new one. You must enter  
:
the current password before you can specify a new one. Once you have entered a new  
password, you are asked to confirm it by entering it again.  
Change PIN Code: Allows you to change your current PIN, provided the PIN check feature is  
enabled. You must enter the current PIN before you can specify a new one.  
Change PIN2 Code: Allows you to change your current PIN2 Code. You must first enter the  
current PIN2 (obtained from your service provider) before you can specify a new one. Enter  
a new PIN2 Code and confirm your entry.  
56  
   
Note: This lock code is typically the last four digits of the current phone number or it can be  
obtained from your service provider’s customer service representative.  
Calls  
The Call menu allows you to set up these options:  
General: allows you to set up options for Show My Number, Call Answer, Call Status Tones  
and Alerts on Call.  
Voice Call: allows you to set up options for Call Waiting and Auto Redial.  
Bluetooth  
The Bluetooth settings allow you to turn on or off the Bluetooth function. In Idle  
mode, press Menu Settings  
Bluetooth  
Activation: used to turn Bluetooth On or Off.  
My Devices: used to Search New Device or Paired Device.  
Bluetooth Services  
.
:
Headset: used to make incoming and outgoing call via Bluetooth.  
Handsfree: used to make incoming and outgoing call via Bluetooth Car Kits.  
Applications Settings  
The Applications menu allows you to customize your phone by choosing options in  
these settings menus: Messaging, Camera, Calendar and Contacts.  
Messaging Settings: Allows you to set up options for Text Message, Multimedia Message,  
and to connect to your Voicemail number. You can also make a Broadcast Message, if this  
option is available on your SIM.  
Camera Settings: Allows you to set up the following camera options:  
General: Allows you to turn on or off: Zoom Sound, Brightness Sound.  
Camera: Allows you to choose from the following options: Shutter Sound (Shutter1,  
Shutter2, Shutter3), Viewfinder Mode (Full Screen, Full Screen & Indicator, Full Screen &  
Guideline, Actual Screen), Scene Program (Normal, Night-time Landscape), Metering  
Exposure (Normal, Center-weighted, Spot), Single Shot (Take and Review, Take and Return).  
Changing Your Settings  
57  
     
Calendar Settings: Allows you to elect to start your calendar on Monday or on Sunday, and  
choose a default view: Month, Week or Day.  
Contacts Settings: Allows you to choose options to manage your Contacts in your Contact  
List. For more information, see “Contacts Settings” on page 52.  
Used Space  
The Memory menu allows you to view the memory usage on your phone. In Idle  
mode, press Menu Settings  
Used Space to view the memory usage in the  
following categories:  
Shared Memory: Shows the total shared memory available.  
Messages: Shows the number of messages stored on your phone and on your SIM Card.  
My Folder: Shows the memory usage in your Audio and Picture folders.  
Calendar: Shows the number of events scheduled on your calendar.  
Contacts: Shows the number of contacts stored on your phone and on your SIM Card.  
About Phone  
The About Phone menu provides information regarding open source licenses. Your  
phone displays the following: This product includes certain free/open source  
software. The exact terms of the licenses, disclaimers, acknowledgements and notices  
are available on the Samsung’s website http://opensource.samsung.com  
.
58  
   
Section 11: Health and Safety Information  
This section outlines the safety precautions associated with using your phone.  
The terms “mobile device” or “cell phone” are used in this section to refer to  
your phone. Read this information before using your mobile device  
.
Exposure to Radio Frequency (RF) Signals  
The U.S. Food and Drug Administration (FDA) has published information for  
consumers relating to Radio Frequency (RF) exposure from wireless phones.  
The FDA publication includes the following information:  
Do cell phones pose a health hazard?  
Many people are concerned that cell phone radiation will cause cancer or other  
serious health hazards. The weight of scientific evidence has not linked cell phones  
with any health problems.  
Cell phones emit low levels of Radio Frequency (RF) energy. Over the past 15 years,  
scientists have conducted hundreds of studies looking at the biological effects of  
the radio frequency energy emitted by cell phones. While some researchers have  
reported biological changes associated with RF energy, these studies have failed to  
be replicated. The majority of studies published have failed to show an association  
between exposure to radio frequency from a cell phone and health problems.  
The low levels of RF cell phones emit while in use are in the microwave frequency  
range. They also emit RF at substantially reduced time intervals when in the stand-  
by mode. Whereas high levels of RF can produce health effects (by heating tissue),  
exposure to low level RF that does not produce heating effects causes no known  
adverse health effects.  
The biological effects of radio frequency energy should not be confused with the  
effects from other types of electromagnetic energy.  
Health and Safety Information  
59  
   
Very high levels of electromagnetic energy, such as is found in X-rays and gamma  
rays, can ionize biological tissues. Ionization is a process where electrons are  
stripped away from their normal locations in atoms and molecules. It can  
permanently damage biological tissues including DNA, the genetic material.  
The energy levels associated with radio frequency energy, including both radio  
waves and microwaves, are not great enough to cause ionization of atoms and  
molecules. Therefore, RF energy is a type of non-ionizing radiation. Other types of  
non-ionizing radiation include visible light, infrared radiation (heat), and other forms  
of electromagnetic radiation with relatively low frequencies.  
While RF energy does not ionize particles, large amounts can increase body  
temperatures and cause tissue damage. Two areas of the body, the eyes and the  
testes, are particularly vulnerable to RF heating because there is relatively little  
blood flow in them to carry away excess heat.  
Research Results to Date: Is there a connection between  
RF and certain health problems?  
The results of most studies conducted to date say no. In addition, attempts to  
replicate and confirm the few studies that have shown a connection have failed.  
The scientific community at large therefore believes that the weight of scientific  
evidence does not show an association between exposure to Radio Frequency (RF)  
from cell phones and adverse health outcomes. Still the scientific community has  
supported additional research to address gaps in knowledge. Some of these studies  
are described below.  
Interphone Study  
Interphone is a large international study designed to determine whether cell phones  
increase the risk of head and neck cancer. A report published in the International  
Journal of Epidemiology (June, 2010) compared cell phone usage for more than  
5,000 people with brain tumors (glioma and meningioma) and a similar number of  
healthy controls.  
60  
Results of this study did NOT show that cell phones caused brain cancer. In this  
study, most people had no increased risk of brain cancer from using cell phones.  
For people with the heaviest use of cell phones (an average of more than ½ hour per  
day, every day, for over 10 years) the study suggested a slight increase in brain  
cancer. However, the authors determined that biases and errors prevented any  
conclusions being drawn from this data. Additional information about Interphone  
can be found at  
Interphone is the largest cell phone study to date, but it did not answer all questions  
about cell phone safety. Additional research is being conducted around the world,  
and the FDA continues to monitor developments in this field.  
International Cohort Study on Mobile Phone Users (COSMOS)  
The COSMOS study aims to conduct long-term health monitoring of a large group of  
people to determine if there are any health issues linked to long-term exposure to  
radio frequency energy from cell phone use. The COSMOS study will follow  
approximately 300,000 adult cell phone users in Europe for 20 to 30 years.  
Additional information about the COSMOS study can be found at  
.
Risk of Brain Cancer from Exposure to Radio Frequency Fields in Childhood and  
Adolescence (MOBI-KIDS)  
MOBI-KIDS is an international study investigating the relationship between exposure  
to radio frequency energy from communication technologies including cell phones  
and brain cancer in young people. This is an international multi-center study  
involving 14 European and non-European countries. Additional information about  
MOBI-KIDS can be found at  
.
Health and Safety Information  
61  
Surveillance, Epidemiology, and End Results (SEER) Program of the National  
Cancer Institute  
The National Cancer Institute (NCI) actively follows cancer statistics in the United  
States to detect any change in rates of new cases for brain cancer. If cell phones  
play a role in risk for brain cancer, rates should go up, because heavy cell phone  
use has been common for quite some time in the U.S. Between 1987 and 2005, the  
overall age-adjusted incidence of brain cancer did not increase. Additional  
information about SEER can be found at  
.
Cell Phone Industry Actions  
Although the existing scientific data do not justify FDA regulatory actions, the FDA  
has urged the cell phone industry to take a number of steps, including the following:  
Support-needed research on possible biological effects of RF for the type of signal emitted  
by cell phones;  
Design cell phones in a way that minimizes any RF exposure to the user; and  
Cooperate in providing users of cell phones with the current information on cell phone use  
and human health concerns.  
The FDA also is working with voluntary standard-setting bodies such as the Institute  
of Electrical and Electronics Engineers (IEEE), the International Commission on Non-  
Ionizing Radiation Protection (ICNIRP), and others to assure that safety standards  
continue to adequately protect the public.  
Reducing Exposure: Hands-Free Kits and Other Accessories  
Steps to Reduce Exposure to Radio Frequency Energy  
If there is a risk from being exposed to radio frequency energy (RF) from cell phones  
- and at this point we do not know that there is - it is probably very small. But, if you  
are concerned about avoiding even potential risks, you can take a few simple steps  
to minimize your RF exposure.  
62  
Reduce the amount of time spent using your cell phone;  
Use speaker mode or a headset to place more distance between your head and the cell  
phone.  
Hands-Free Kits  
Hands-free kits may include audio or Bluetooth® headsets and various types of  
body-worn accessories such as belt-clips and holsters. Combinations of these can  
be used to reduce RF energy absorption from cell phones.  
Headsets can substantially reduce exposure because the phone is held away from  
the head in the user's hand or in approved body-worn accessories. Cell phones  
marketed in the U.S. are required to meet RF exposure compliance requirements  
when used against the head and against the body.  
Because there are no known risks from exposure to RF emissions from cell phones,  
there is no reason to believe that hands-free kits reduce risks. Hands-free kits can  
be used for convenience and comfort. They are also required by law in many states  
if you want to use your phone while driving.  
Cell Phone Accessories that Claim to Shield the Head from  
RF Radiation  
Because there are no known risks from exposure to RF emissions from cell phones,  
there is no reason to believe that accessories which claim to shield the head from  
those emissions reduce risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have shown that these products  
generally do not work as advertised. Unlike “hands-free” kits, these so-called  
“shields” may interfere with proper operation of the phone. The phone may be  
forced to boost its power to compensate, leading to an increase in RF absorption.  
Health and Safety Information  
63  
Children and Cell Phones  
The scientific evidence does not show a danger to any users of cell phones from RF  
exposure, including children and teenagers. The steps adults can take to reduce RF  
exposure apply to children and teenagers as well.  
Reduce the amount of time spent on the cell phone;  
Use speaker mode or a headset to place more distance between the head and the cell  
phone.  
Some groups sponsored by other national governments have advised that children  
be discouraged from using cell phones at all. For example, The Stewart Report from  
the United Kingdom made such a recommendation in December 2000. In this  
report, a group of independent experts noted that no evidence exists that using a  
cell phone causes brain tumors or other ill effects. Their recommendation to limit  
cell phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Additional information on the safety of RF exposures from various sources can be  
obtained from the following organizations (updated 10/1/2010):  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration (OSHA):  
(Note: This web address is case sensitive.)  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
International Commission on Non-Ionizing Radiation Protection:  
64  
Health Protection Agency:  
US Food and Drug Administration:  
Specific Absorption Rate (SAR) Certification Information  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set  
by the Federal Communications Commission (FCC) of the U.S. Government.  
These FCC exposure limits are derived from the recommendations of two expert  
organizations: the National Council on Radiation Protection and Measurement  
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE).  
In both cases, the recommendations were developed by scientific and engineering  
experts drawn from industry, government, and academia after extensive reviews of  
the scientific literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure  
of the rate of absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to comply with a  
safety limit of 1.6 watts per kilogram (1.6 W/kg).  
The FCC exposure limit incorporates a substantial margin of safety to give additional  
protection to the public and to account for any variations in measurements.  
SAR tests are conducted using standard operating positions accepted by the FCC  
with the phone transmitting at its highest certified power level in all tested  
frequency bands. Although the SAR is determined at the highest certified power  
level, the actual SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to operate at multiple power  
levels so as to use only the power required to reach the network. In general, the  
closer you are to a wireless base station antenna, the lower the power output.  
Health and Safety Information  
65  
 
Before a new model phone is available for sale to the public, it must be tested and  
certified to the FCC that it does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in positions and locations (e.g. at  
the ear and worn on the body) as required by the FCC.  
For body-worn operation, this phone has been tested and meets FCC RF exposure  
guidelines when used with an accessory that contains no metal and that positions  
the mobile device a minimum of 1.5 cm from the body.  
Use of other accessories may not ensure compliance with FCC RF exposure  
guidelines.  
The FCC has granted an Equipment Authorization for this mobile phone with  
all reported SAR levels evaluated as in compliance with the FCC RF exposure  
guidelines. The maximum SAR values for this model phone as reported to  
the FCC are:  
Head: 0.43 W/Kg.  
Body-worn: 0.73 W/Kg.  
SAR information on this and other model phones can be viewed online at http://  
www.fcc.gov/oet/ea. To find information that pertains to a particular model phone,  
this site uses the phone FCC ID number which is usually printed somewhere on  
the case of the phone.  
Sometimes it may be necessary to remove the battery pack to find the number.  
Once you have the FCC ID number for a particular phone, follow the instructions on  
the website and it should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be obtained at  
.
66  
Smart Practices While Driving  
On the Road - Off the Phone  
The primary responsibility of every driver is the safe operation of his or her vehicle.  
Responsible drivers understand that no secondary task should be performed while  
driving whether it be eating, drinking, talking to passengers, or talking on a mobile  
phone - unless the driver has assessed the driving conditions and is confident that  
the secondary task will not interfere with their primary responsibility. Do not engage  
in any activity while driving a moving vehicle which may cause you to take your eyes  
off the road or become so absorbed in the activity that your ability to concentrate on  
the act of driving becomes impaired. Samsung is committed to promoting  
responsible driving and giving drivers the tools they need to understand and address  
distractions.  
Check the laws and regulations on the use of mobile devices and their accessories in  
the areas where you drive. Always obey them. The use of these devices may be  
prohibited or restricted in certain areas. For example, only hands-free use may be  
permitted in certain areas.  
Before answering calls, consider your circumstances. Let the call go to voicemail  
when driving conditions require. Remember, driving comes first, not the call!  
If you consider a call necessary and appropriate, follow these tips:  
Use a hands-free device;  
Secure your phone within easy reach;  
Place calls when you are not moving;  
Plan calls when your car will be stationary;  
Do not engage in stressful or emotional conversations;  
Let the person with whom you are speaking know that you are driving and will suspend the  
call if necessary;  
Do not take notes or look up phone numbers while driving;  
Health and Safety Information  
67  
 
Notice regarding legal restrictions on mounting this device in an automobile:  
Laws in some states may prohibit mounting this device on or near the windshield of  
an automobile. In other states, the law may permit mounting this device only in  
specific locations in the automobile. Be sure to consult the state and local laws or  
ordinances where you drive before mounting this device in an automobile. Failure to  
comply with these restrictions could result in fines, penalties, or other damages.  
Never mount this device in a manner that will obstruct the driver's clear view of the  
street and traffic.  
Never use wireless data services such as text messaging, Web browsing, or e-mail  
while operating a vehicle.  
Never watch videos, such as a movie or clip, or play video games while operating a  
vehicle.  
For more information, go to http://www.ctia.org  
.
Battery Use and Safety  
Important!: Handle and store batteries properly to avoid injury or damage. Most battery issues arise  
from improper handling of batteries and, particularly, from the continued use of  
damaged batteries.  
Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form  
of your battery. Do not put a high degree of pressure on the battery. This can cause  
leakage or an internal short-circuit, resulting in overheating.  
Do not let the phone or battery come in contact with liquids. Liquids can get into the  
phone's circuits, leading to corrosion. Even when the phone appears to be dry and appears  
to operate normally, the circuitry could slowly corrode and pose a safety hazard. If the  
phone and/or battery get wet, have them checked by your service provider or contact  
Samsung, even if they appear to be working properly.  
68  
 
Do not place your battery in or near a heat source. Excessive heating can damage the  
phone or the battery and could cause the phone or the battery to explode. Do not dry a wet  
or damp battery with an appliance or heat source such as a microwave oven, hair dryer,  
iron, or radiator. Avoid leaving your phone in your car in high temperatures.  
Do not dispose of the phone or the battery in a fire. The phone or the battery may  
explode when overheated.  
Do not handle a damaged or leaking battery. Do not let leaking battery fluid come in  
contact with your eyes, skin or clothing. For safe disposal options, contact your nearest  
Samsung-authorized service center.  
Avoid dropping the cell phone. Dropping the phone or the battery, especially on a hard  
surface, can potentially cause damage to the phone and battery. If you suspect damage to  
the phone or battery, take it to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Do not allow the battery to touch metal objects. Accidental short-circuiting can occur  
when a metallic object (coin, key, jewelry, clip, or pen) causes a direct connection between  
the + and - terminals of the battery (metal strips on the battery), for example when you  
carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the  
battery or the object causing the short-circuiting.  
Important!: Use only Samsung-approved batteries, and recharge your battery only with Samsung-  
approved chargers which are specifically designed for your phone.  
Warning!: Use of a non-Samsung-approved battery or charger may present a risk of fire, explosion,  
leakage, or other hazard. Samsung's warranty does not cover damage to the phone  
caused by non-Samsung-approved batteries and/or chargers.  
Health and Safety Information  
69  
Do not use incompatible cell phone batteries and chargers. Some websites and  
second-hand dealers not associated with reputable manufacturers and carriers, might be  
selling incompatible or even counterfeit batteries and chargers. Consumers should  
purchase manufacturer or carrier-recommended products and accessories. If unsure about  
whether a replacement battery or charger is compatible, contact the manufacturer of the  
battery or charger.  
Misuse or use of incompatible phones, batteries, and charging devices could result  
in damage to the equipment and a possible risk of fire, explosion, or leakage, leading  
to serious injuries, damages to your phone, or other serious hazard  
.
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its customers to recycle  
Samsung mobile devices and genuine Samsung accessories.  
Proper disposal of your mobile device and its battery is not only important for safety,  
it benefits the environment. Batteries must be recycled or disposed of properly.  
Recycling programs for your mobile device, batteries, and accessories may not be  
available in your area.  
We've made it easy for you to recycle your old Samsung mobile device by working  
with respected take-back companies in every state in the country.  
Drop It Off  
You can drop off your Samsung-branded mobile device and batteries for recycling  
at one of our numerous Samsung Recycling Direct (SM) locations. A list of these  
Samsung-branded devices and batteries will be accepted at these locations for  
no fee.  
70  
 
Consumers may also recycle their used mobile device or batteries at many retail  
or carrier-provided locations where mobile devices and batteries are sold.  
Additional information regarding specific locations may be found at:  
.
Mail It In  
The Samsung Mobile Take-Back Program will provide Samsung customers with a free  
recycling mailing label. Just go to  
phone_page and follow the instructions to print out a free pre-paid postage label  
and then send your old mobile device or battery to the address listed, via U.S. Mail,  
for recycling.  
Dispose of unwanted electronics through an approved recycler.  
To find the nearest recycling location, go to our website:  
Or call, (877) 278-0799.  
Follow local regulations regarding disposal of mobile devices and batteries  
Dispose of your mobile device and batteries in accordance with local regulations. In  
some areas, the disposal of these items in household or business trash may be  
prohibited. Help us protect the environment - recycle!  
Warning!: Never dispose of batteries in a fire because they may explode.  
Health and Safety Information  
71  
UL Certified Travel Charger  
The Travel Charger for this phone has met applicable UL safety requirements.  
Please adhere to the following safety instructions per UL guidelines:  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY  
FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN  
ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR  
THE POWER OUTLET.  
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTED IN A  
VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.  
Display / Touch-Screen  
Please note the following information when using your mobile device:  
WARNING REGARDING DISPLAY  
The display on your mobile device is made of glass or acrylic and could break  
if your mobile device is dropped or if it receives significant impact. Do not use  
if screen is broken or cracked as this could cause injury to you.  
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN MOBILE DEVICE  
If your mobile device has a touch-screen display, please note that a touch-  
screen responds best to a light touch from the pad of your finger or a non-  
metallic stylus. Using excessive force or a metallic object when pressing  
on the touch-screen may damage the tempered glass surface and void  
the warranty.  
72  
   
GPS & AGPS  
Certain Samsung mobile devices can use a Global Positioning System (GPS)  
signal for location-based applications. A GPS uses satellites controlled by the U.S.  
Government that are subject to changes implemented in accordance with the  
Department of Defense policy and the 2008 Federal Radio navigation Plan (FRP).  
Changes may affect the performance of location-based technology on your  
mobile device.  
Certain Samsung mobile devices can also use an Assisted Global Positioning  
System (AGPS), which obtains information from the cellular network to improve  
GPS performance. AGPS uses your wireless service provider's network and  
therefore airtime, data charges, and/or additional charges may apply in accordance  
with your service plan. Contact your wireless service provider for details.  
Your Location  
Location-based information includes information that can be used to determine the  
approximate location of a mobile device. Mobile devices which are connected to a  
wireless network transmit location-based information. Additionally, if you use  
applications that require location-based information (e.g. driving directions), such  
applications transmit location-based information. The location-based information  
may be shared with third-parties, including your wireless service provider,  
applications providers, Samsung, and other third-parties providing services.  
Use of AGPS in Emergency Calls  
When you make an emergency call, the cellular network may activate AGPS  
technology in your mobile device to tell the emergency responders your  
approximate location.  
AGPS has limitations and might not work in your area. Therefore:  
Always tell the emergency responder your location to the best of your ability; and  
Remain on the mobile device for as long as the emergency responder instructs you.  
Health and Safety Information  
73  
 
Navigation  
Maps, directions, and other navigation data may contain inaccurate or incomplete  
data, and circumstances can and do change over time. In some areas, complete  
information may not be available. Therefore, you should always visually confirm that  
the navigational instructions are consistent with what you see before following them.  
All users should pay attention to road conditions, closures, traffic, and all other factors  
that may impact safe driving or walking. Always obey posted road signs  
.
Emergency Calls  
This mobile device, like any wireless mobile device, operates using radio  
signals, wireless and landline networks, as well as user-programmed functions,  
which cannot guarantee connection in all conditions, areas, or circumstances.  
Therefore, you should never rely solely on any wireless mobile device for essential  
communications (medical emergencies, for example). Before traveling in remote  
or underdeveloped areas, plan an alternate method of contacting emergency  
services personnel. Remember, to make or receive any calls, the mobile device  
must be switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless mobile device networks or  
when certain network services and/or mobile device features are in use. Check with  
local service providers.  
To make an emergency call:  
1. If the mobile device is not on, switch it on.  
2. Key in the emergency number for your present location (for example, 911 or  
other official emergency number). Emergency numbers vary by location.  
3. Press the “Send” key.  
If certain features are in use (call blocking, for example), you may first need to  
deactivate those features before you can make an emergency call. Consult your  
User Manual and your local cellular service provider. When making an emergency  
call, remember to give all the necessary information as accurately as possible.  
74  
 
Remember that your mobile device may be the only means of communication at  
the scene of an accident; do not cut off the call until given permission to do so.  
Care and Maintenance  
Your mobile device is a product of superior design and craftsmanship and should be  
treated with care. The suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many years:  
Keep your Samsung Mobile Device away from:  
Liquids of any kind  
Keep the mobile device dry. Precipitation, humidity, and liquids contain minerals  
that will corrode electronic circuits. If the mobile device does get wet, do not  
accelerate drying with the use of an oven, microwave, or dryer, because this may  
damage the mobile device and could cause a fire or explosion. Do not use the  
mobile device with a wet hand. Doing so may cause an electric shock to you or  
damage to the mobile device.  
Extreme heat or cold  
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.  
Microwaves  
Do not try to dry your mobile device in a microwave oven. Doing so may cause a fire  
or explosion.  
Dust and dirt  
Do not expose your mobile device to dust, dirt, or sand.  
Cleaning solutions  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the mobile  
device. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.  
Shock or vibration  
Do not drop, knock, or shake the mobile device. Rough handling can break internal  
circuit boards.  
Health and Safety Information  
75  
 
Paint  
Do not paint the mobile device. Paint can clog the device’s moving parts or ventilation  
openings and prevent proper operation.  
Responsible Listening  
Caution!: Avoid potential hearing loss  
.
Damage to hearing occurs when a person is exposed to loud sounds over time. The  
risk of hearing loss increases as sound is played louder and for longer durations.  
Prolonged exposure to loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that using portable  
audio devices, such as portable music players and cell phones, at high volume  
settings for long durations may lead to permanent noise-induced hearing loss. This  
includes the use of headphones (including headsets, earbuds, and Bluetooth® or  
other wireless devices). Exposure to very loud sound has also been associated in  
some studies with tinnitus (a ringing in the ear), hypersensitivity to sound, and  
distorted hearing. Individual susceptibility to noise-induced hearing loss and  
potential hearing problem varies. Additionally, the amount of sound produced by a  
portable audio device varies depending on the nature of the sound, the device  
settings, and the headphones that are used. As a result, there is no single volume  
setting that is appropriate for everyone or for every combination of sound, settings,  
and equipment.  
You should follow some common sense recommendations when using any portable  
audio device:  
Always turn the volume down before plugging the earphones into an audio source.  
Set the volume in a quiet environment and select the lowest volume at which you can hear  
adequately.  
Be aware that you can adapt to higher volume settings over time, not realizing that the  
higher volume may be harmful to your hearing.  
76  
 
When using headphones, turn the volume down if you cannot hear the people speaking near  
you or if the person sitting next to you can hear what you are listening to.  
Do not turn the volume up to block out noisy surroundings. If you choose to listen to your  
portable device in a noisy environment, use noise-cancelling headphones to block out  
background environmental noise. By blocking background environment noise, noise  
cancelling headphones should allow you to hear the music at lower volumes than when  
using earbuds.  
Limit the amount of time you listen. As the volume increases, less time is required before  
you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such as rock concerts,  
that might cause temporary hearing loss. Temporary hearing loss might cause unsafe  
volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you experience ringing in your  
ears, hear muffled speech, or experience any temporary hearing difficulty after listening to  
your portable audio device, discontinue use and consult your doctor.  
You can obtain additional information on this subject from the following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
Health and Safety Information  
77  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
National Institute for Occupational Safety and Health (NIOSH)  
395 E Street, S.W.  
Suite 9200  
Patriots Plaza Building  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4674)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
1-888-232-6348 TTY  
Operating Environment  
Remember to follow any special regulations in force in any area, and always switch  
your mobile device off whenever it is forbidden to use it, or when it may cause  
interference or danger. When connecting the mobile device or any accessory to  
another device, read its user's guide for detailed safety instructions. Do not connect  
incompatible products.  
78  
 
Using Your Mobile Device Near Other Electronic Devices  
Most modern electronic equipment is shielded from Radio Frequency (RF) signals.  
However, certain electronic equipment may not be shielded against the RF signals  
from your wireless mobile device. Consult the manufacturer to discuss alternatives.  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained between a handheld  
wireless mobile device and an implantable medical device, such as a pacemaker or  
implantable cardioverter defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
Should ALWAYS keep the mobile device more than six (6) inches from their implantable  
medical device when the mobile device is turned ON;  
Should not carry the mobile device in a breast pocket;  
Should use the ear opposite the implantable medical device to minimize the potential  
for interference;  
Should turn the mobile device OFF immediately if there is any reason to suspect that  
interference is taking place;  
Should read and follow the directions from the manufacturer of your implantable medical  
device. If you have any questions about using your wireless mobile device with an  
implantable medical device, consult your health care provider.  
.
Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of your  
device to determine if it is adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this information. Switch your  
mobile device off in health care facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Health and Safety Information  
79  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles. Check with the manufacturer or its representative  
regarding your vehicle before using your mobile device in a motor vehicle. You  
should also consult the manufacturer of any equipment that has been added to  
your vehicle.  
Posted Facilities  
Switch your mobile device off in any facility where posted notices require you to  
do so.  
Potentially Explosive Environments  
Switch your mobile device off when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even death. Users are advised to  
switch the mobile device off while at a refueling point (service station). Users are  
reminded of the need to observe restrictions on the use of radio equipment in fuel  
depots (fuel storage and distribution areas), chemical plants, or where blasting  
operations are in progress. Areas with a potentially explosive atmosphere are often,  
but not always, clearly marked. They include below deck on boats, chemical  
transfer or storage facilities, vehicles using liquefied petroleum gas (such as  
propane or butane), areas where the air contains chemicals or particles, such as  
grain, dust, or metal powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
FCCHearingAidCompatibility(HAC)RegulationsforWireless  
Devices  
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and  
Order in WT Docket 01-309 modified the exception of wireless mobile devices  
under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless  
mobile devices be compatible with hearing aids.  
80  
 
The intent of the HAC Act is to ensure reasonable access to telecommunications  
services for persons with hearing disabilities. While some wireless mobile devices  
are used near some hearing devices (hearing aids and cochlear implants), users  
may detect a buzzing, humming, or whining noise. Some hearing devices are more  
immune than others to this interference noise, and mobile devices also vary in the  
amount of interference they generate.  
The wireless telephone industry has developed a rating system for wireless mobile  
devices to assist hearing device users find mobile devices that may be compatible  
with their hearing devices. Not all mobile devices have been rated. Mobile devices  
that are rated have the rating on their box or a label located on the box.  
The ratings are not guarantees. Results will vary depending on the user's hearing  
device and hearing loss. If your hearing device happens to be vulnerable to  
interference, you may not be able to use a rated mobile device successfully. Trying  
out the mobile device with your hearing device is the best way to evaluate it for your  
personal needs.  
M-Ratings: Mobile devices rated M3 or M4 meet FCC requirements and are likely  
to generate less interference to hearing devices than mobile devices that are not  
labeled. M4 is the better/higher of the two ratings.  
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements and are likely  
to generate less interference to hearing devices than mobile devices that are not  
labeled. T4 is the better/higher of the two ratings.  
Hearing devices may also be rated. Your hearing device manufacturer or hearing  
health professional may help you find this rating. Higher ratings mean that the  
hearing device is relatively immune to interference noise. The hearing aid and  
wireless mobile device rating values are then added together.  
Health and Safety Information  
81  
A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for  
best use.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
In the above example, if a hearing aid meets the M2 level rating and the wireless  
mobile device meets the M3 level rating, the sum of the two values equal M5. This  
is synonymous for T ratings. This should provide the hearing aid user with “normal  
usage” while using their hearing aid with the particular wireless mobile device.  
“Normal usage” in this context is defined as a signal quality that is acceptable for  
normal operation. The M mark is intended to be synonymous with the U mark. The  
T mark is intended to be synonymous with the UT mark. The M and T marks are  
recommended by the Alliance for Telecommunications Industries Solutions (ATIS).  
The U and UT marks are referenced in Section 20.19 of the FCC Rules.  
The HAC rating and measurement procedure are described in the American National  
Standards Institute (ANSI) C63.19 standard.  
Restricting Children's Access to Your  
Mobile Device  
Your mobile device is not a toy. Do not allow children to play with it because they  
could hurt themselves and others, damage the mobile device, or make calls that  
increase your mobile device bill.  
Keep the mobile device and all its parts and accessories out of the reach of small  
children.  
82  
 
FCC Notice and Cautions  
FCC Notice  
The mobile device may cause TV or radio interference if used in close proximity  
to receiving equipment. The FCC can require you to stop using the mobile device  
if such interference cannot be eliminated. Vehicles using liquefied petroleum  
gas (such as propane or butane) must comply with the National Fire Protection  
Standard (NFPA-58). For a copy of this standard, contact the National Fire  
Protection Association.  
Cautions  
Any changes or modifications to your mobile device not expressly approved in this  
document could void your warranty for this equipment and void your authority to  
operate this equipment. Only use approved batteries, antennas, and chargers. The  
use of any unauthorized accessories may be dangerous and void the mobile device  
warranty if said accessories cause damage or a defect to the mobile device.  
Although your mobile device is quite sturdy, it is a complex piece of equipment and  
can be broken. Avoid dropping, hitting, bending, or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the mobile device or install the mobile device in a  
vehicle. Faulty installation or service may be dangerous and may invalidate any warranty  
applicable to the device.  
Ensure that any mobile devices or related equipment installed in your vehicle are  
securely mounted.  
Check regularly that all wireless mobile device equipment in your vehicle is mounted and  
operating properly.  
Do not store or carry flammable liquids, gases, or explosive materials in the same  
compartment as the mobile device, its parts, or accessories.  
Health and Safety Information  
83  
   
For vehicles equipped with an air bag, remember that an air bag inflates with great force.  
Do not place objects, including installed or portable wireless equipment near or in the area  
over the air bag or in the air bag deployment area. If wireless equipment is improperly  
installed and the air bag inflates, serious injury could result.  
Switch your mobile device off before boarding an aircraft. The use of wireless mobile  
devices in aircraft is illegal and may be dangerous to the aircraft's operation. Check with  
appropriate authorities before using any function of a mobile device while on an aircraft.  
Failure to observe these instructions may lead to the suspension or denial of cell phone  
services to the offender, or legal action, or both.  
84  

Toshiba MK4008GAH (HDD1744) User Manual
Sprint Nextel T600 User Manual
Siemens XT55 AVL User Manual
Seagate ST905004EXB101 RK User Manual
Samsung Omnia SGH i900 User Manual
Salton ME8TDPB User Manual
Philips PCA103CD User Manual
Philips FLAT TV 42PFL9632D User Manual
Philips AJ3144 User Manual
Panasonic P342i User Manual