* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
SGH-Q100
Samsung
GPRS Wizard/
EasyGPRS
ELECTRONICS
m
Printed in Korea
World Wide Web
Code No.: GH68-01984A
English. 06/2001. Rev.1.0
Contents (continued)
SMS (Short Message Service) . . . . . . . . . . . . . . . . . . 42
Viewing and Editing SMS Messages . . . . . . . . . . . . . . . . 42
Creating a New SMS Message . . . . . . . . . . . . . . . . . . . . 44
Using a Preset Message . . . . . . . . . . . . . . . . . . . . . . . . . 45
Deleting SMS Messages . . . . . . . . . . . . . . . . . . . . . . . . . 46
Moving and Copying SMS Messages . . . . . . . . . . . . . . . 46
Using the SMS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Viewing and Editing Schedule Events . . . . . . . . . . . . . . . 48
Creating a New Schedule Event . . . . . . . . . . . . . . . . . . . 49
Deleting Schedule Events . . . . . . . . . . . . . . . . . . . . . . . . 50
Moving and Copying Schedule Events . . . . . . . . . . . . . . . 51
Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Melody Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using the Composer Tabs . . . . . . . . . . . . . . . . . . . . . . . . 54
Creating a New Melody . . . . . . . . . . . . . . . . . . . . . . . . . 56
Editing a Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Downloading a Melody to the Phone . . . . . . . . . . . . . . . . 58
Image Downloading . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Reloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
E-Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Sending an E-mail from the Phonebook . . . . . . . . . . . . . . 62
Sending an E-mail from the SMS List View . . . . . . . . . . . 62
Linker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
4
Installation
Installation
System Requirements
To install the GPRS Wizard software, you must have
the following system configuration or better:
4. Select GPRS Wizard and click INSTALL.
• An IBM or IBM-compatible computer with a
486SX or higher processor
• Windows 95/98/Me/2000/NT 4.0
• A minimum of 3 MB of RAM
• At least 6 MB of free disk space
• A data communication cable
Installing the Samsung GPRS Wizard
5. Select the language version to be installed and
click OK.
1. Start Windows, if it is not already running.
2. Insert the software CD-ROM supplied with your
phone in the CD-ROM drive.
If Windows automatically runs the CD-ROM, go to
Step 4.
3. In the Windows Explorer, right-click the Samsung
CD-ROM and select AutoPlay in the popup menu
displayed.
6. Follow the on-screen instructions.
6
7
Installation
Installation
7. When the installation is completed, click Finish.
2. Click Next.
Now, you can see the Samsung GPRS Wizard icon
on your desktop.
3. Click Finish to complete the setup.
Setting Up the Samsung GPRS Modem
Driver
Windows 95/98/Me:
1. Select Start ¡ Programs ¡ Samsung GPRS
Wizard ¡ Samsung GPRS Wizard.
You can also double-click the Samsung GPRS
Wizard icon on the desktop.
Windows automatically restarts and the Samsung
GPRS modem is selected as your PC modem.
Double-click
here.
Note: You can check that the Samsung GPRS
modem has been added. Select Start ¡
Settings ¡ Control Panel ¡ Modems.
8
9
Installation
Installation
Windows 2000:
4. Check the Don’t detect my modem; I will select it
from a list box. and click Next.
1. Select Start ¡ Programs ¡ Samsung GPRS
Wizard ¡ Samsung GPRS Wizard.
You can also double-click the Samsung GPRS
Wizard icon on the desktop.
Double-click
here.
The Welcome to Setup Wizard for Samsung GPRS
Modem window is displayed.
5. Select Samsung in the Manufacturers list, then
Samsung GPRS Modem in the Models list.
Click Next.
2. Click Next.
3. Click Add to install the Samsung GPRS Modem.
10
11
Installation
Installation
6. Select the port to be used for the modem, and
Windows NT 4.0:
click Next.
1. Select Start ¡ Programs ¡ Samsung GPRS
Wizard ¡ Samsung GPRS Wizard.
You can also double-click the Samsung GPRS
Wizard icon on the desktop.
Double-click
here.
7. The Digital Signature Not Found window is
displayed. Click Yes.
8. When the setup process has been completed,
click Finish.
The Phone and Modem Options window opens,
showing the modem set up on the Modem tab.
The Welcome to Setup Wizard for Samsung GPRS
Modem window is displayed.
2. Click Next.
3. Check the Don’t detect my modem; I will select it
from a list box. and click Next.
9. Click OK to complete the setup.
12
13
Installation
Installation
4. Select Samsung in the Manufacturers list, then
Samsung GPRS Modem in the Models list.
Click Next.
7. Click Close to exit the window.
5. Select the port to be used for the modem, and
click Next.
A message window recommending you to
configure Dial-up Networking is displayed.
8. Click Yes.
9. Click Continue to configure Dial-up Networking
automatically.
6. When the setup process has been completed,
click Finish.
10. Check the configuration.
11. Click Yes to complete the setup. Windows
automatically restarts and the Samsung GPRS
modem is selected as your PC modem.
The Modems Properties window showing the
modem you have set up opens.
14
15
Installation
Getting Started
Uninstalling the Samsung GPRS Wizard
1. Insert the software CD-ROM supplied with your
phone in the CD-ROM drive.
Setting the Connection Properties
If Windows automatically runs the CD-ROM, go to
Step 3.
You must first create a data session to configure the
various connection properties. To do so, proceed as
follows.
2. In the Windows Explorer, right-click the Samsung
CD-ROM and select AutoPlay in the popup menu
displayed.
1. Select Start ¡ Programs ¡ Samsung GPRS
Wizard ¡ Samsung GPRS Wizard.
You can also double-click the Samsung GPRS
Wizard icon on the desktop.
3. Select the language version and click OK.
The Set Connection Properties window is
displayed automatically with the default
parameters.
A message box asking you to confirm your action
opens.
4. Click OK.
Specify the access
point name (APN).
Assign a name to the data
session.
The Samsung GPRS Wizard is removed from your
hard disk.
5. When the uninstallation is completed,
click Finish.
Provides you with
advanced settings.
Enter your user name
and password.
Select this option to store
your password.
2. If necessary, enter the parameters in each of the
input fields.
16
17
Getting Started
Getting Started
Accessing the Internet
3. If necessary, click Advanced... and change the
settings to reflect your setup.
1. Connect your SGH-Q100 phone to the computer’s
serial COM port using the data communication
cable supplied.
If you wish to specify the DNS server address
manually, select Use the following DNS server
address and enter the address(es).
Allows you to set the minimum
quality of service.
Allows you to set the
quality of service to
which you have
subscribed.
If your phone and computer are communicating
correctly, you can see the
icon in the bottom
right-hand corner of the Windows task bar.
2. Open the Samsung GPRS Wizard by double-
clicking the Samsung GPRS Wizard icon on the
desktop or selecting Start ¡ Programs ¡
Samsung GPRS Wizard ¡ Samsung GPRS
Wizard in the Windows task bar.
DNS server address to be used as
a backup when the preferred
address is not available.
DNS server address
to be used by default.
3. Double-click the data session icon.
4. Click Ok to close the QoS Setting window.
5. When you have finished, click Save in the Set
Connection Properties window. You can see the
data session icon you have created in the window.
Double-click
here.
The Samsung GPRS Wizard connects to the
network.
Data session
icon.
18
19
Getting Started
Getting Started
Editing the Connection Properties
4. Run Microsoft Internet Explorer or Netscape
Navigator, and enjoy surfing the Internet.
1. From the Samsung GPRS Wizard window, select
the icon corresponding to the data session to be
edited.
5. When you wish to close the data session, select
Communication in the menu bar, followed by
Hang up in the popup menu.
2. Select Connection ¡ Properties in the menu bar,
or right-click on the icon and select Properties.
The Set Connection Properties window is displayed.
Alternatively, you can double-click on the data
session icon.
After a few seconds, the data session is closed.
3. Click Edit.
4. Change the parameters as required.
5. When you are satisfied, click Save.
Adding a New Data Session
You can set up more than one data session.
1. From the Samsung GPRS Wizard menu bar, select
Connection ¡ New.
Deleting an Existing Data Session
The Set Connection Properties Window is
displayed.
1. From the Samsung GPRS Wizard window, select
the icon corresponding to the data session to be
deleted.
2. Enter the parameters as required.
2. Select Connection ¡ Delete in the menu bar, or
right-click on the icon and select Delete.
A message box asking you to confirm the deletion
is displayed.
3. When you are satisfied, click Save.
You can see the new data session icon that you
have added.
3. Click Yes to confirm the deletion.
The selected icon is removed from the Samsung
GPRS Wizard window.
20
21
Notes
22
Installation
Installation
4. Select EasyGPRS and click INSTALL.
System Requirements
To install the EasyGPRS software, you must have the
following system configuration or better:
• An IBM or IBM-compatible computer with a 486SX
or higher processor
• Windows 95/98/Me/NT 4.0/2000
• A minimum of 3 MB of RAM
• At least 6 MB of free disk space
• A data communication cable
5. Select the language version to be installed and
click OK.
Installing EasyGPRS
1. Start Windows, if it is not already running.
2. Insert the software CD-ROM supplied with your
phone in the CD-ROM drive.
6. Follow the on-screen instructions.
If Windows automatically runs the CD-ROM, go to
Step 4.
7. When the installation is completed, a message
box recommends you restart your computer. Click
Finish.
3. In the Windows Explorer, right-click the Samsung
CD-ROM and select AutoPlay in the popup menu
displayed.
Windows automatically restarts. The EasyGPRS
folder is added to the Program Files folder and the
EasyGPRS icon appears on your desktop.
24
25
Installation
Getting Started
Uninstalling EasyGPRS
Starting EasyGPRS
1. Insert the software CD-ROM supplied with your
phone in the CD-ROM drive.
1. Before you start EasyGPRS, make sure that your
SGH-Q100 phone is connected to the computer’s
serial COM port using the data communication
cable supplied.
If Windows automatically runs the CD-ROM, go to
Step 3.
2. In the Windows Explorer, right-click the Samsung
CD-ROM and select AutoPlay in the popup menu
displayed.
3. Select the language version and click OK.
A message box asking you to confirm your action
opens.
4. Click OK.
2. In the Windows task bar, select Start ¡
Programs ¡ EasyGPRS ¡ EasyGPRS.
You can also double-click the EasyGPRS icon on
the desktop.
The EasyGPRS application is removed from your
hard disk.
5. When the uninstallation is completed, click
Finish.
Double-click
here.
26
27
Getting Started
Getting Started
3. Click the Setup button.
6. Click OK.
The Setup dialog box is displayed.
EasyGPRS automatically loads the data from your
phone to the PC via the COM port and the
EasyGPRS main window is displayed.
Click here.
Shows that your
phone and PC are
communicating.
4. Set the various parameters in the Setup dialog box.
See the next page for more information on the
EasyGPRS main window.
Select the serial port used for
the connection and the data
transfer speed.
Select the language
and the model.
Note: If you wish to run EasyGPRS without
connecting a phone, click the Offline radio
button in the startup window before
clicking OK.
You can switch to the online mode at any
time by selecting File ¡ Online.
Click here.
Enter your name, phone number
and E-mail address.
5. When you are satisfied with your settings, click OK
to return to the startup window.
28
29
Getting Started
Getting Started
EasyGPRS Main Window
Toolbar
Gives you quick access to the functions
used most frequently. You can view or hide
the toolbar by selecting View ¡ Toolbar.
Pulldown Menu Bar
Gives you access to the
EasyGPRS functions.
List View
Lists the entries in the
selected category.
Entry Detail View
Shows the information on the
selected item in the list view.
Tree View
Status Bar
Displays the hierarchy and allows you to
select the category to be viewed.
To expand or collapse the hierarchy, click
on the + or - symbol to the left of the
names or double-click the name.
Displays the current status.
You can view or hide the status bar
by selecting View ¡ Status Bar.
30
31
Getting Started
Getting Started
Using the Toolbar
Reloads data from the phone to your
computer.
Executes the Melody Composer program
to create your own melody or edit an
existing melody.
Adds a new entry to your phonebook.
Downloads a melody created or edited
via the Melody Composer to your phone.
Writes and sends a new SMS
message.
Downloads a background image to your
phone.
Adds a new entry to your schedule.
Using the Help
Prints the phonebook entries, SMS
messages, schedule entries or call
records, as required.
You can access the EasyGPRS online help for a
detailed description of its features.
To open the help file, select Help ¡ Help Contents.
Deletes the selected item.
Runs your E-mail editor to allow you to
write and send an E-mail.
Exiting EasyGPRS
To exit EasyGPRS, select File ¡ Exit or click
the top right-hand corner of the EasyGPRS main
window.
in
Replies to the selected SMS message.
Forwards the selected SMS message to
another person.
Resends the selected SMS message to
the same person.
32
33
Phonebook
Phonebook
2. Click the entry to be viewed or edited.
The corresponding information is displayed in the
entry detail view.
When you start EasyGPRS, you can view the phonebook
data loaded from your phone. You can edit or delete
existing phonebook entries or create new entries on
your computer.
Viewing and Editing Phonebook Entries
1. Make sure that phonebook data is displayed. If
not, click Phonebook in the tree view.
All existing entries are displayed in the list view.
Entry detail view
3. If you wish to edit the entry, select the Edit ¡
View/Edit menu option or double-click the entry.
The Phonebook dialog box is displayed with the
current settings for the selected entry.
To view the contents of
the selected memory
location in the list view,
click the appropriate
location.
To sort a list in alphabetical
or numerical order, click the
appropriate column header.
4. Edit the information as required.
5. When you are satisfied with your input, click OK.
34
35
Phonebook
Phonebook
Creating a New Phonebook Entry
1. Make sure that phonebook data is displayed.
4. When you are satisfied with your settings, click
If not, click Phonebook in the tree view.
OK.
2. Click the
icon in the toolbar or select Edit ¡
New ¡ Phonebook.
The Phonebook dialog box is displayed with the first
available empty location in the memory last
updated (SIM card, MS phone memory or PC). You
may change the location as required.
To send a message to the
corresponding person, click
here. To create and send a
message, see page 44.
3. Enter the appropriate information in the various
fields.
Notes:
• If the selected memory is full, an error message
is displayed.
• If you try to store an entry in a location that is
already used, a warning message is displayed,
prompting you to select another location.
For the SIM card or MS phone memory, you can
enter the location number, name and main phone
number, while for the PC you can enter additional
information not available in the SIM and MS
memories (E-mail address for example).
36
37
Phonebook
Phonebook
Deleting Phonebook Entries
Moving and Copying Phonebook Entries
You can move or copy phonebook entries from one
memory location (SIM card, MS phone memory or
PC) to another.
1. Make sure that phonebook data is displayed. If not,
click Phonebook in the tree view.
2. Click the item(s) to be deleted.
1. Select the phonebook entries to be moved or
copied. The selected entries are highlighted.
3. When the required items are highlighted, select
2. Select Edit ¡ Cut to move an entry or
Edit ¡ Copy to copy an entry.
Edit ¡ Delete or click
.
If you wish to delete all data in the selected
phonebook, choose Edit ¡ Delete All.
3. In the tree view, select the location to which the
entries are to be moved or copied.
4. Select Edit ¡ Paste.
You are prompted to confirm the deletion.
The entries are moved or copied to the selected
location in the list view.
Note: To move or copy an entry to a new location,
you can also use the Drag-and-Drop
feature.
Quick way to select several items of the same type
•
To select several contiguous items (a single block), click the first
item, then press the Shift key and click the last item. All items
between the first and the last are highlighted.
4. Click Yes to confirm the deletion.
The phonebook data is deleted.
•
To select several non-contiguous items (several blocks), press the
Ctrl key and click each item.
38
39
Phonebook
Phonebook
Using the Phonebook Menu
Importing and Exporting the Phonebook
Once you have selected the required entry in the
Phonebook list, you can use the following menu
options.
The Import/Export feature allows you to import
address book data from your Windows address book
to EasyGPRS and vice versa.
1. Select Tool ¡ Import/Export Phonebook.
New Message: Allows you to send a new message
to the number displayed in the selected phonebook
entry. For further details on how to create and send
SMS messages, see page 44.
Send Mail: Links to your E-mail editor. It allows you
to send an E-mail to the E-mail address displayed in
the selected phonebook entry. For further details on
how to send an E-mail, see page 62.
2. Select the entries to be copied and click
to transfer them.
The data is copied in the appropriate direction.
or
Select the
memory location.
3. When you have finished, click Close.
40
41
SMS (Short Message Service)
SMS (Short Message Service)
Using EasyGPRS, you can:
REC UNREAD: The message has been received but
not yet read.
REC READ: The message has been received and read.
STO UNSENT: The message has been stored but not
yet sent.
• View all SMS data stored in the SIM card
• Edit or delete the data
• Create and send a new message
• Reply to a message received
STO SENT: The message has been stored and sent.
Viewing and Editing SMS Messages
1. In the EasyGPRS tree view, click SMS.
All SMS messages are displayed.
Shows the full
message contents.
3. If you wish to edit the message, select Edit ¡
View/Edit or double-click the required message.
The New Message dialog box is displayed with
the existing details.
To display SMS data, click
SMS.
2. Click the message to be viewed in detail.
The selected message is highlighted and the full
message contents are displayed in the detail view.
4. Edit the information as required.
5. When you are satisfied, click Send.
42
43
SMS (Short Message Service)
SMS (Short Message Service)
Creating a New SMS Message
Using a Preset Message
1. In the EasyGPRS tree view, click SMS.
You can save frequently used messages as preset
messages and recall them whenever you want, thus
avoiding the need to write them again.
2. Select SMS ¡ New Message, click the
icon in the toolbar or select Edit ¡ New ¡
Message.
1. To use a preset message, click Preset Message
The New Message dialog box is displayed.
List in the New Message dialog box.
The Preset Message List dialog box is displayed.
3. Adjust the settings as required.
Click here to Select a memory
search for the number location in which the
in the phonebook. message is to be saved.
2. To...
Create a new preset
Then click...
New.
message
View an existing message
Edit an existing message
The message.
• The message
• Edit
Click here and select the
required option (Save, Send
or Save&Send) in the
pulldown list.
Click here if you wish to
use a preset message
saved in EasyGPRS.
See page 45.
Delete an existing message • The message
• Delete
Use an existing message
• The message
• OK
4. To send the message, click Send.
44
45
SMS (Short Message Service)
SMS (Short Message Service)
Notes:
Deleting SMS Messages
• To move or copy a message to a new location,
you can also use the Drag-and-Drop feature.
• To select several messages at a time, see page 39.
1. Make sure that SMS message data is displayed.
If not, click SMS in the tree view.
Using the SMS Menu
2. Click the item(s) to be deleted.
Once you have selected the required message in the
SMS list, you can use the following SMS menu
options.
3. When the required items are highlighted, select
Edit ¡ Delete or click
.
If you wish to delete all SMS messages in the
selected location, choose Edit ¡ Delete All.
You are prompted to confirm the deletion.
4. Click Yes to confirm the deletion.
The SMS message data is deleted.
Moving and Copying SMS Messages
New Message: allows you to create a new SMS
message.
You can move or copy SMS messages from one
memory location (SIM card, MS phone memory or PC)
to another.
Reply: allows you to reply to a person from whom
you have received a message.
1. Select the SMS messages to be moved or copied.
The selected messages are highlighted.
Forward: allows you to forward the message to the
person(s) of your choice.
Send: allows you to send the selected message to
2. Select Edit ¡ Cut to move a message or Edit ¡
the same person again.
Copy to copy a message.
Preset Message List: allows you to use a preset
message saved in EasyGPRS. For further details on
how to use preset messages, see page 45.
3. In the tree view, select the location to which the
messages are to be moved or copied.
4. Select Edit ¡ Paste.
The messages are moved or copied to the selected
location in the list view.
Service Center Address: allows you to specify the
phone number of your SMS service center. Contact
your service provider for this number.
46
47
Schedule
Schedule
The Schedule Management feature enables you to:
3. If you wish to edit the contents of an event, select
Edit ¡ View/Edit or double-click the required
event. The Schedule dialog box is displayed with
the existing details.
• Keep track of your appointments and meetings
• Set an alarm to remind you of various events
Viewing and Editing Schedule Events
1. In the EasyGPRS tree view, click Schedule.
4. Edit the information as required.
5. When you are satisfied, click OK.
Creating a New Schedule Event
1. In the EasyGPRS tree view, click Schedule.
To display schedule
Indicates the schedule type.
data, click Schedule. Gray: Previous schedule event
Yellow: Today’s schedule event
Blue: Next schedule event
2. Click the event to be viewed in detail.
The selected schedule event is highlighted and the
full event contents are displayed in the detail view.
To display schedule data, click
Schedule.
48
49
Schedule
Schedule
2. To create a new event, click
or select Edit ¡
3. When the required items are highlighted, select
New ¡ Schedule.
Edit ¡ Delete or click
.
The Schedule dialog box is displayed.
If you wish to delete all schedule events in the
selected location, choose Edit ¡ Delete All.
You are prompted to confirm the deletion.
3. Enter the appropriate information in the various
fields.
4. Click Yes to confirm the deletion.
The schedule data is deleted.
Select the memory location in
which the event is to be saved.
Moving and Copying Schedule Events
You can move or copy schedule events from one
memory location (MS phone memory or PC) to
another.
1. Select the schedule events to be moved or copied.
The selected events are highlighted.
2. Select Edit ¡ Cut to move an event or Edit ¡
Copy to copy an event.
3. In the tree view, select the location to which the
events are to be moved or copied.
If you set the alarm to Click here, then select the date
On, your phone rings
from the pop-up calendar or
select an element of the date and
time and change it manually.
at the scheduled time.
4. Select Edit ¡ Paste.
The events are moved or copied to the selected
location in the list view.
4. When you are satisfied with your settings, click OK.
Deleting Schedule Events
Notes:
• To move or copy an event to a new location, you
can also use the Drag-and-Drop feature.
• To select several events at a time, see page 39.
1. Make sure that schedule data is displayed. If not,
click Schedule in the tree view.
2. Click the item(s) to be deleted.
50
51
Call Records
Melody Composer
The Call Records feature enables you to check
recently made, received and missed calls.
The Melody Composer allows you to compose your
own melody and save it as a music file in the PC. You
can then download the music file to your phone and
use it as the ring tone.
1. To see your call records, click Call Records in the
tree view.
Getting Started
Click
in the EasyGPRS toolbar or select Tool ¡
Melody Composer.
The Melody Editor for EasyGPRS window is
displayed.
Composer Tabs
and Tools
Main Toolbar
2. To display call records of a selected type only, click
the corresponding category in the list view.
Missed Calls: Calls that you were unable to
answer
Received Calls: Calls that you have received
Dialled Calls:
Calls that you have made
3. If you wish to delete a call record, click on it and
select Edit ¡ Delete or click
.
Music Sheet
The measure automatically extends as
you add to it.
Note: To select several call records at a time, see
page 39.
52
53
Melody Composer
Melody Composer
Using the Composer Tabs
Key: Major/ Key: Minor tab - Allows you to
change the key.
Notes tab - Allows you to insert or delete notes.
Select the note to be
inserted and click the
required position on the
measure to insert it.
Select this tool and click
the note to be deleted or
right-click the note.
Select the required key. The default is C Major.
Select this tool and click the measure to delete all notes
in the measure.
Clef tab - Allows you to change the clef.
Rests tab - Allows you to insert a rest.
Select the required clef. The default is the treble
clef.
Select the appropriate rest and click the required
position on the measure to insert it.
Tempo tab - Allows you to change the tempo.
Time tab - Allows you to change the musical time
pattern.
Select the required tempo. The default is moderato.
Select the required time pattern. If the time pattern
is changed, the notes will be rearranged in line with
the selected time pattern. The default is 4/4.
54
55
Melody Composer
Melody Composer
5. When you are satisfied with your melody, click
to exit the Melody Composer and return to the
main EasyGPRS window.
Creating a New Melody
1. To change the melody title, click the current title
and type the required title (up to 60 characters).
Editing a Melody
2. Compose your melody, using the composer tabs.
See page 54 for further details.
1. To open an existing music file, click
toolbar.
in the
The Open dialog box is displayed.
2. Select the file to be edited and click Open.
The Melody Editor for EasyGPRS window displays
the selected melody on the music sheet.
3. To...
Listen to the melody
Then click...
.
Stop playing the melody
Save the melody
.
3. Edit the melody in the same way as if you were
creating a new melody.
.
Go to Step 4.
4. To save the edited melody, click
.
4. Select the directory in which the music file is to be
saved and type the file name. Click Save.
5. Click
to exit the Melody Composer and return
to the main EasyGPRS window.
The music file is saved in the .gsm format.
56
57
Melody Composer
Image
Downloading a Melody to the Phone
Downloading
Make sure that you are in online mode. If not, select
File ¡ Online.
You can use an image downloaded from a network
service as the background image for the SGH-Q100
phone.
1. Click
in the EasyGPRS toolbar.
The Melody to Phone dialog box is displayed.
Make sure that you are in online mode. If not, select
File ¡ Online.
1. Click
in the EasyGPRS toolbar or select
Tool ¡ Image To Phone.
The Image to Phone dialog box is displayed.
2. Click Select.
The Open dialog box is displayed.
3. Select the image file to be downloaded and click
OK.
2. Click Select and select the music file to be
You can see the image in the preview window and
the selected image file name is displayed in the
File Name field.
downloaded.
3. Modify the melody title if necessary.
4. Select the location (index 1 or 2) in which the
melody is to be saved in the phone.
5. To download the file, click Download.
The file is downloaded to the phone.
If you select a location (index 1 or 2) that already
contains a melody, EasyGPRS asks you if you wish
to overwrite it. Click Yes to overwrite it or No to
select another location.
Preview
window
6. When you have finished, click Close.
4. Modify the image title if necessary.
58
59
Image Downloading
Reloading
When you start EasyGPRS, the phonebook, SMS,
schedule and call record information in your phone is
automatically loaded. If you change this information
in the phone, you must reload it.
5. Select the location (index 1, 2 or 3) in which the
image is to be saved in the phone.
6. To download the image, click Download.
If you select a location that already contains an
image, EasyGPRS asks you if you wish to
overwrite it. Click Yes to overwrite it or No to
select another location.
Before reloading, make sure you are in the online
mode. If not, select File ¡ Online.
1. Click
in the toolbar.
7. When you have finished, click Close.
2. Select the item to be reloaded from the pulldown
list. If you wish to reload all information, select All.
You can also select File ¡ Reload All or File ¡
Reload followed by the item to be reloaded.
Your PC starts reloading.
3. When it has finished, you can see the reloaded
information in each part of the EasyGPRS tree view.
60
61
E-Mail
Linker
The E-mail feature links you to your E-mail editor and
allows you to send an E-mail.
With the Linker feature, you can select the programs of
your choice and link EasyGPRS to them so that you can
execute them directly without leaving EasyGPRS. You
can select a maximum of five programs.
Sending an E-Mail from the Phonebook
1. Select Linker ¡ Linker.
The Linker dialog box is displayed.
1. Select the required entry in the Phonebook list
view and click
.
2. To add a link to a program, click Add.
Your E-mail editor is executed and a dialog box is
displayed with the E-mail address of the selected
phonebook entry.
Updates the selected
link by replacing
the current program
with another one.
2. Type the message in the message field and click
Deletes the
selected link.
Send.
Once you have added
a link, the linked
program is listed here.
Sending an E-Mail from the SMS List View
The Open dialog box is displayed.
1. Select the required message in the SMS list view
and click
.
3. Select the program to be linked and click Open.
Your E-mail editor is executed and a dialog box is
displayed with the selected message.
The selected program is now linked to EasyGPRS.
4. Click Close.
2. Type an E-mail address in the address field and
click Send.
5. Once you have added a link, you can see the linked
program in the Linker menu. To execute a linked
program, select it in the Linker menu.
62
63
Index
Index
A
D (continued)
E (continued)
M (continued)
Address book
Dialog box
Exporting a phonebook • 41
Messages
importing/exporting • 41
Applications
linking • 63
Image to Phone • 59
Import/Export
Phonebook • 41
Linker • 63
Melody to Phone • 58
New Message • 43, 44
Phonebook • 35, 37
Preset Message List • 45
QoS Setting • 18
Schedule • 49, 50
Set Connection
Properties • 17
Setup • 28
DNS server configuration • 18
Downloading
images • 59
melodies • 58
copying SMS • 46
creating SMS • 44
deleting SMS • 46
editing SMS • 42
menu • 47
moving SMS • 46
preset • 45
G
GPRS Wizard
see Wizard
C
H
Call records • 52
Composer
melody • 53
Help • 33
sending • 44
I
sending E-mail • 62
viewing SMS • 42
Modem driver, setting up • 8
Moving
phonebook entries • 39
schedule events • 51
SMS messages • 46
Configuration
EasyGPRS • 28
GPRS Wizard • 8
system • 6; 24
Connecting the serial
cable • 19; 27
Connection properties
adding • 20
deleting • 21
editing• 21
setting • 17
Copying
phonebook entries • 39
schedule events • 51
SMS messages • 46
Creating
data sessions • 20
melodies • 56
phonebook entries • 36
schedule events • 49
SMS messages • 44
Icons • 32
Image to Phone dialog
box • 59
Images
downloading • 59
Import/Export Phonebook
dialog box • 41
Importing a phonebook • 41
Installing
EasyGPRS • 24
GPRS Wizard • 6
Internet
N
Drag-and-Drop feature • 39
Driver
modem • 8
New Message dialog
box • 43, 44
P
E
Phonebook
accessing • 19
EasyGPRS
copying entries • 39
creating entries • 36
deleting entries • 36
dialog box • 35, 37
editing entries • 34
exporting/importing • 41
menu • 40
L
installing • 24
main window • 30
purpose • 2
starting • 27
uninstalling • 26
Editing
Linker • 63
dialog box • 63
List view • 31
M
data sessions • 21
melodies • 57
phonebook entries • 34
schedule events • 48
SMS messages • 42
E-mail • 62
Entry detail view • 30
Executing
EasyGPRS • 27
GPRS Wizard • 17
Melody Composer • 53
Exiting
moving entries • 39
sending E-mail • 62
viewing entries • 34
Preset Message List dialog
box • 45
Preset messages • 45
Programs
Melody
D
composer • 53
creating • 56
downloading • 58
editing • 57
main window • 53
starting • 53
tabs • 54
to Phone dialog box • 58
Menu bar • 30
Menus
phonebook • 40
SMS • 47
Data session
adding • 20
deleting • 21
editing• 21
setting up • 17
Deleting
linking • 63
Pulldown menu bar • 30
call records • 52
data sessions • 20
phonebook entries • 38
schedule events • 50
SMS messages • 46
Q
QoS Setting dialog box • 18
Quality of service
configuring • 18
EasyGPRS • 33
GPRS Wizard • 20
64
65
Index
R
S (continued)
SMS (continued)
Reloading data • 61
Removing
EasyGPRS • 26
GPRS Wizard • 16
Running
sending messages • 44
viewing messages • 42
Starting
EasyGPRS • 27
GPRS Wizard • 17
Melody Composer • 53
Status bar • 31
System requirements
EasyGPRS • 24
EasyGPRS • 27
GPRS Wizard • 17
Melody Composer • 53
S
GPRS Wizard • 6
Schedule
copying events • 51
creating events • 49
deleting events • 50
dialog box • 49, 50
editing events • 48
moving events • 51
viewing events • 48
Selecting items • 39
Sending
T
Toolbar
EasyGPRS • 30, 32
Melody Composer • 53
Tree view • 30
U
Uninstalling
EasyGPRS • 26
GPRS Wizard • 16
E-mail • 62
messages • 44
Serial cable
connecting • 27
Service center
V
Viewing
call records • 52
phonebook entries • 34
schedule events • 48
SMS messages • 42
address • 47
Service quality
configuration • 18
Session
setting up data • 17-21
Set Connection Properties
dialog box • 17
Setting up
W
Window
EasyGPRS main • 30
Melody Composer • 53
Windows
EasyGPRS • 28
modem driver • 8
Setup dialog box • 28
SMS
copying messages • 46
creating messages • 44
deleting messages • 46
editing messages • 42
menu • 47
address book • 53
2000 modem driver • 10
95/98/Me modem
driver • 6
NT 4.0 modem driver • 13
Wizard
installing • 6
purpose • 2
starting • 17
system requirements • 6
uninstalling • 16
moving messages • 46
preset messages • 45
sending E-mail • 62
66
|