Nokia CLASSIC 6220 User Manual

User’s Guide for Nokia 6220

9356210

1. issue

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

9356210 /1. issue

Contents

FOR YOUR SAFETY ..............................................................................................12

General information............................................................................................16

Access codes ...............................................................................................................................................16

Security code (5 to 10 digits).............................................................................................................16

PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN...........................................16

PUK and PUK2 codes (8 digits)...........................................................................................................17

Barring password (4 digits).................................................................................................................17

Wallet code (4 to 10 digits)................................................................................................................17

Overview of the functions of the phone.............................................................................................18

Shared memory.......................................................................................................................................19

1. Getting started ................................................................................................20

Installing the SIM card and the battery..............................................................................................20

Changing the covers.................................................................................................................................23

Charging the battery ................................................................................................................................24

Switching the phone on and off ...........................................................................................................25

2. Your phone.......................................................................................................27

Keys and connectors.................................................................................................................................27

Standby mode.............................................................................................................................................29

Wallpaper.................................................................................................................................................30

Screen saver.............................................................................................................................................30

Essential indicators in standby mode...............................................................................................30

Keypad lock (Keyguard) ...........................................................................................................................33

Over the air settings service...................................................................................................................34

3. Call functions ..................................................................................................35

Making a call ..............................................................................................................................................35

Speed dialling a phone number.........................................................................................................36

Answering or rejecting an incoming call............................................................................................36

Call waiting..............................................................................................................................................37

Options during a call................................................................................................................................37

4. Writing text.....................................................................................................39

Setting predictive text input on or off................................................................................................39

Using predictive text input.....................................................................................................................39

Writing compound words....................................................................................................................40

Using traditional text input....................................................................................................................41

Tips for writing text..................................................................................................................................41

5. Using the menu ...............................................................................................43

Accessing a menu function ....................................................................................................................43

List of menu functions.............................................................................................................................45

6. Menu functions...............................................................................................50

Messages (Menu 1)...................................................................................................................................50

Text messages (SMS).............................................................................................................................50

Writing and sending messages.......................................................................................................50

Options for sending a message.......................................................................................................51

Writing and sending e-mail via SMS............................................................................................52

Reading and replying to an SMS message or an e-mail.........................................................53

Inbox and sent items folders...........................................................................................................54

Distribution lists..................................................................................................................................54

Templates..............................................................................................................................................56

Archive folder and My folders.........................................................................................................56

Multimedia messages ...........................................................................................................................57

Writing and sending a multimedia message ..............................................................................58

Reading and replying to a multimedia message .......................................................................60

Inbox, Outbox, Saved and Sent items folders.............................................................................61

Multimedia messages memory full...................................................................................................61

Deleting messages .................................................................................................................................62

E-mail messages.....................................................................................................................................62

Writing and sending an e-mail.......................................................................................................63

Downloading e-mail messages from your e-mail account.....................................................64

Replying to an e-mail message......................................................................................................65

Inbox, Outbox, Deleted items, Sent items, Drafts and Archive folders ...............................65

E-mail settings ....................................................................................................................................66

Options available for an e-mail application...............................................................................68

Chat............................................................................................................................................................68

Entering the chat menu....................................................................................................................70

Connecting to the chat service and disconnecting ..................................................................71

Starting a chat conversation...........................................................................................................71

Accepting or rejecting a chat invitation......................................................................................73

Reading a received chat message..................................................................................................73

Participating in a chat conversation.............................................................................................74

Editing your own information.........................................................................................................75

Contacts for the chat ........................................................................................................................76

Blocking and unblocking messages...............................................................................................76

Groups....................................................................................................................................................77

Voice messages.......................................................................................................................................78

Info messages..........................................................................................................................................79

Message settings....................................................................................................................................79

Settings for text and e-mail messages.........................................................................................79

Overwrite settings..............................................................................................................................80

Settings for multimedia messages ................................................................................................81

Font size setting..................................................................................................................................83

Service commands.................................................................................................................................83

Call register (Menu 2) ..............................................................................................................................83

Recent calls lists.....................................................................................................................................83

Call counters and call timers..............................................................................................................84

Contacts (Menu 3) ....................................................................................................................................85

Selecting settings for contacts ..........................................................................................................86

Saving names and phone numbers (Add contact)........................................................................86

Saving multiple numbers or text items per name........................................................................87

Adding an image to a name or number in contacts....................................................................88

Searching for a contact........................................................................................................................89

Deleting contacts...................................................................................................................................90

Editing or deleting details in the contacts .....................................................................................90

My presence.............................................................................................................................................91

Subscribed contacts ..............................................................................................................................93

Adding contacts to the subscribed contacts ..............................................................................93

Viewing the subscribed contacts ...................................................................................................94

Unsubscribing a contact...................................................................................................................95

Copying contacts....................................................................................................................................95

Sending and receiving a business card............................................................................................96

Speed dials...............................................................................................................................................97

Voice dialling...........................................................................................................................................97

Adding and managing voice tags...................................................................................................98

Making a call by using a voice tag................................................................................................99

Info numbers and service numbers...................................................................................................99

My numbers.............................................................................................................................................99

Caller groups ........................................................................................................................................ 100

Settings (Menu 4) ................................................................................................................................. 101

Profiles ................................................................................................................................................... 101

Tone settings ........................................................................................................................................ 102

Display settings.................................................................................................................................... 103

Time and date settings...................................................................................................................... 104

Personal shortcuts .............................................................................................................................. 105

Connectivity.......................................................................................................................................... 106

Infrared............................................................................................................................................... 106

(E)GPRS............................................................................................................................................... 108

(E)GPRS connection ........................................................................................................................ 109

(E)GPRS modem settings............................................................................................................... 110

Call settings.......................................................................................................................................... 110

Phone settings ..................................................................................................................................... 112

Chat and Presence settings.............................................................................................................. 114

Enhancement settings....................................................................................................................... 115

Security settings.................................................................................................................................. 116

Restore factory settings.................................................................................................................... 117

Gallery (Menu 5)..................................................................................................................................... 117

Options for the files in the gallery................................................................................................. 119

Media (Menu 6) ...................................................................................................................................... 121

Camera................................................................................................................................................... 121

To take a photo ................................................................................................................................ 121

Recording a video clip.................................................................................................................... 122

Camera settings ............................................................................................................................... 123

Radio....................................................................................................................................................... 123

Tuning a radio channel .................................................................................................................. 124

Using the radio................................................................................................................................. 125

Voice recorder...................................................................................................................................... 126

Recording........................................................................................................................................... 126

List of recordings............................................................................................................................. 127

Organiser (Menu 7)................................................................................................................................ 127

Alarm clock........................................................................................................................................... 127

When the alarm time expires....................................................................................................... 128

Calendar................................................................................................................................................. 128

Making a calendar note................................................................................................................. 129

When the phone sounds an alarm for a note.......................................................................... 130

To-do list ............................................................................................................................................... 131

Notes....................................................................................................................................................... 132

Games (Menu 8)...................................................................................................................................... 133

Launching a game............................................................................................................................... 133

Other options available for a game or game set ....................................................................... 133

Game downloads................................................................................................................................. 134

Memory status for games................................................................................................................. 134

Game settings...................................................................................................................................... 135

Applications (Menu 9)........................................................................................................................... 135

Launching an application ................................................................................................................. 135

Other options available for an application or application set............................................... 136

Downloading an application............................................................................................................ 136

Memory status for applications...................................................................................................... 138

Extras (Menu 10).................................................................................................................................... 138

Calculator.............................................................................................................................................. 138

Countdown timer................................................................................................................................ 139

Stopwatch............................................................................................................................................. 140

Wallet..................................................................................................................................................... 141

Accessing the wallet menu........................................................................................................... 142

Saving card details.......................................................................................................................... 143

Personal notes .................................................................................................................................. 144

Creating a wallet profile................................................................................................................ 144

Wallet settings ................................................................................................................................. 145

Guidelines for paying for your purchases with the wallet .................................................. 145

Synchronisation................................................................................................................................... 146

Synchronising from your phone.................................................................................................. 147

Settings for the synchronisation................................................................................................. 148

Synchronising from your PC......................................................................................................... 149

Services (Menu 11) ................................................................................................................................ 149

Basic steps for accessing and using services.............................................................................. 150

Setting up the phone for a service................................................................................................. 151

Keying in the service settings manually ................................................................................... 151

Making a connection to a service.................................................................................................. 152

Browsing the pages of a service..................................................................................................... 152

Using the phone keys while browsing....................................................................................... 153

Options while browsing................................................................................................................. 153

Direct calling..................................................................................................................................... 154

Disconnect from a service ................................................................................................................ 154

Appearance settings of the multi-mode browser...................................................................... 154

Cookies................................................................................................................................................... 155

Bookmarks............................................................................................................................................. 155

Receiving a bookmark.................................................................................................................... 156

Downloading ........................................................................................................................................ 156

Service inbox........................................................................................................................................ 157

Service inbox settings .................................................................................................................... 157

The cache memory.............................................................................................................................. 158

Browser security.................................................................................................................................. 158

Security module............................................................................................................................... 158

Certificates ........................................................................................................................................ 159

Digital signature .............................................................................................................................. 161

Go to (Menu 12) ..................................................................................................................................... 162

SIM services (Menu 13)........................................................................................................................ 162

7. PC Connectivity ............................................................................................ 163

PC Suite..................................................................................................................................................... 163

(E)GPRS, HSCSD and CSD ................................................................................................................. 164

Using data communication applications......................................................................................... 165

8. Battery information...................................................................................... 166

Charging and Discharging.................................................................................................................... 166

CARE AND MAINTENANCE.............................................................................. 168

IMPORTANT SAFETY INFORMATION............................................................... 169

FOR YOUR SAFETY

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further

detailed information is given in this manual.

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Don't use a hand-held phone while driving.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don't use the phone where blasting is in progress. Observe restrictions, and

follow any regulations or rules.

USE SENSIBLY

Use only in the normal position. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible

products.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user's guide for detailed safety

instructions. Do not connect incompatible products.

BACKUP COPIES

Remember to make backup copies of all important data.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

CALLING

Ensure the phone is switched on and in service. Enter the phone number,

including the area code, then press

. To end a call, press

. To answer

a call, press

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the

emergency number, then press

until told to do so.

. Give your location. Do not end the call

■ Network Services

The wireless phone described in this guide is approved for use on the EGSM 900, GSM 1800

and GSM 1900 network.

Triband is a network-dependent feature. Check with your local service provider if you can

subscribe to and use this feature.

This wireless phone, Nokia 6220, is 3GPP GSM Release 99 terminal supporting (E)GPRS

service, and is designed to support also Release 97 GPRS networks. However, proper

functionality in all Release 97 GPRS networks cannot be guaranteed. For more information,

contact your service provider or local Nokia dealer.

This phone supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some

features of this phone, such as MMS, browsing, e-mail, chat, presence-enhanced contacts,

remote SyncML, and content downloading via browser or over MMS, require network

support for these technologies.

A number of features included in this guide are called Network Services. These are special

services that you arrange through your wireless service provider. Before you can take

advantage of any of these Network Services, you must subscribe to them through your

service provider and obtain instructions for their use from your service provider.

Note: Some networks may not support all language-dependent characters and/or

services.

■ About accessories

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-12, ACP-8, ACP-7, LCH-9 and LCH-12.

Warning: Use only batteries, chargers and accessories approved by the phone

manufacturer for use with this particular phone model. The use of any other types

may invalidate any approval or warranty applying to the phone, and may be

dangerous.

For availability of approved accessories, please check with your dealer.

A few practical rules for accessory operation

•

Keep all accessories out of the reach of small children.

When you disconnect the power cord of any accessory, grasp and pull the plug, not the

cord.

•

Check regularly that any vehicle-installed accessories are mounted and are operating

properly.

Installation of any complex car accessories must be made by qualified personnel only.

General information

■ Access codes

Security code (5 to 10 digits)

The security code protects your phone against unauthorised use. The pre-set code

is 12345. Change the code, and keep the new code secret and in a safe place

separate from your phone. To change the code, and to set the phone to request the

code, see Security settings on page 116.

PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN

• The PIN (Personal Identification Number) code protects your SIM card against

unauthorised use. The PIN code is usually supplied with the SIM card. Set the

phone to request the PIN code each time the phone is switched on, see

Security settings on page 116.

• The PIN2 code may be supplied with the SIM card and is required to access

some functions, such as charging unit counters.

• The module PIN is required to access the information in the security module.

See Security module on page 158. The module PIN is supplied with the SIM

card if the SIM card has a security module in it.

• The signing PIN is required for the digital signature. See Digital signature on

page 161. The signing PIN is supplied with the SIM card if the SIM card has a

security module in it.

If you key in an incorrect PIN code three times in succession, the phone may

display SIM blocked or PIN code blocked, for example, and ask you to enter the

PUK code.

PUK and PUK2 codes (8 digits)

The PUK (Personal Unblocking Key) code is required to change a blocked PIN code.

The PUK2 code is required to change a blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your local service provider

for the codes.

Barring password (4 digits)

The barring password is required when using the Call barring service, see Security

settings on page 116. You can obtain the password from your service provider.

Wallet code (4 to 10 digits)

The wallet code is required to access the wallet services. If you key in an incorrect

wallet code several times, the wallet application is blocked for five minutes. For

further information, see Wallet on page 141.

■ Overview of the functions of the phone

The Nokia 6220 phone provides many functions that are practical for daily use,

such as a calendar, a clock, an alarm clock and a radio, and a built-in camera. The

camera can be used for recording video clips and taking pictures that you can, for

example, attach as wallpapers in standby mode or as thumbnail pictures in

Contacts. See Camera on page 121. Also, a range of Nokia Xpress-on^TMcolour

covers is available for your phone. To change the covers, see Changing the covers

on page 23.

Your phone also supports

• EDGE (Enhanced Data rates for GSM Evolution), see (E)GPRS on page 108. In

EDGE packet transmission networks the connection is faster than in GPRS

network.

• Multimedia messaging service (MMS) and is able to send and receive

multimedia messages composed of text, a picture, a sound clip and a video clip.

You can save the pictures and ringing tones for personalising your phone. See

Multimedia messages on page 57.

• xHTML browser that enables you to fetch more colourful and richer graphical

content from web servers and to view it. See Services (Menu 11) on page 149.

• E-mail function to receive, read and send e-mails. See E-mail messages on

page 62.

• Presence-enhanced contacts that enables you to conveniently share your

availability information with your colleagues, family and friends. See My

presence on page 91.

• Chat, which is a way of sending short text messages that are delivered

immediately to online users. See Chat on page 68.

• Polyphonic sound (MIDI) that consists of several sound components played at

the same time. The phone has sound components from over 40 instruments,

but it can play up to 16 instruments at the same time. Polyphonic sounds are

used in ringing tones and message alert tones. The phone supports Scalable

Polyphonic MIDI (SP-MIDI) format.

• Java 2 Micro Edition, J2ME^TM, and includes some Java applications and games

that have been specially designed for mobile phones. You can download new

applications and games to your phone, see Applications (Menu 9) on page 135.

Shared memory

The following features in this phone may share memory: contacts, text, chat and

multimedia messages, e-mails, voice tags and SMS distribution lists, images,

ringing tones, video clips and sound clips in gallery, camera, calendar, to-do notes,

and Java games and applications, and note application. Using any such features

may reduce the memory available for any features sharing memory. This is

especially true with heavy use of any of the features (although some of the

features may have a certain amount of memory specially allotted to them in

addition to the amount of memory shared with other features). For example,

saving many images, java applications, etc., may take all of the shared memory

and your phone may display a message that the memory is full. In this case, delete

some of the information or entries stored in the shared memory features before

continuing.

1. Getting started

■ Installing the SIM card and the battery

•

Keep all miniature SIM cards out of the reach of small children.

The SIM card and its contacts can easily be damaged by scratches or bending, so

be careful when handling, inserting or removing the card.

Before installing the SIM card, always make sure that the phone is switched off

and disconnected from any enhancement and then remove the battery.

1. To remove the back cover off the phone:

With the back of the phone facing you, push the

back cover release button (1) and slide the back

cover to remove it from the phone (2).

2. Remove the battery by lifting it from the end

from the finger grip (3).

3. To release the SIM card holder, slide the card holder backwards (4) and open it

by lifting (5).

4. Insert the SIM card into the SIM card holder (6).

Make sure that the SIM card is properly inserted

and that the golden contact area on the card is

facing downwards.

5. Close the SIM card holder (7) and slide it forwards

to lock it (8).

6. Replace the battery (9).

7. Slide the back cover into its place (10).

■ Changing the covers

Before changing the cover, always switch off the power and disconnect the phone from the

charger or any other device. Avoid touching electronic components while changing the

covers. Always store and use the phone with the covers attached.

1. Remove the back cover from the phone. See step 1 in Installing the SIM card

and the battery on page 20.

2. Gently remove the phone from the front cover by

starting to lift it from the bottom of the phone

(1).

3. Place the key mat on the new front cover (2).

4. To replace the front cover, place the catches of

the cover into the corresponding holes on the

phone (3) and then gently press the cover into

place.

5. Replace the back cover of the phone. See step 7

in Installing the SIM card and the battery on page 20.

■ Charging the battery

1. Connect the lead from the charger to

the socket on the bottom of your phone.

2. Connect the charger to an AC wall

socket.

The text Charging is displayed briefly if

the phone is switched on. If the battery

is completely flat, it may take a few minutes before the charging indicator

appears on the display or before any calls can be made.

You can use the phone while the charger is connected.

The charging time depends on the charger and the battery used. For example,

charging a BLD-3 battery with the ACP-12 charger takes approximately one hour

and 30 minutes while the phone is in standby mode.

■ Switching the phone on and off

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

Press and hold the power key

Note that if the phone displays Insert SIM card even though the

SIM card is properly inserted, or SIM card not supported,

contact your network operator or service provider. Your phone

does not support 5-Volt SIM cards and the card may need to be

changed.

• If the phone asks for a PIN code, key in the PIN code (for

example, displayed as ****), and press OK.

See also PIN code request in Security settings on page 116 and Access codes on

page 16.

• If the phone asks for a security code, key in the security code (for example,

displayed as *****), and press OK.

See also Access codes on page 16.

TIPS ON EFFICIENT OPERATION: Your phone has a built-

in antenna. As with any other radio transmitting device,

do not touch the antenna unnecessarily when the phone

is switched on. Contact with the antenna affects call

quality and may cause the phone to operate at a higher

power level than otherwise needed. Not touching the

antenna area during a phone call optimises the antenna

performance and the talktime of your phone.

2. Your phone

■ Keys and connectors

1. Power key

Switches the phone on and off.

When the keypad is locked, pressing

the power key briefly turns the

phone’s display lights on for

approximately 15 seconds.

2. Earpiece

3. Volume keys

Adjust the volume of the earpiece or

the loudspeaker, or the headset

when it is connected to the phone.

4. Selection keys

and

The function of these keys depends

on the guiding text shown on the

display above the keys. See Standby

mode on page 29.

dials a phone number, and

answers a call. In standby mode it

shows the list of the most recently called numbers.

enter numbers and characters.

and

are used for various purposes in different functions.

ends an active call. Exits from any function.

and

8. 4-way scroll keys

Enables, for example, scrolling through contacts, menus or settings and in

calendar, or moving the cursor when writing text.

9. Loudspeaker

1. Charger connector

2. Pop-Port^TMconnector used, for

example, for headsets and the

data cable. Connect an

enhancement to the Pop-Port

connector as shown in the

picture.

3. Infrared (IR) port

4. Camera lens on the back cover of the phone.

■ Standby mode

When the phone is ready for use, and you have not keyed

in any characters, the phone is in standby mode.

1. Shows the name of the network or the operator

logo to indicate in which cellular network the

phone is currently being used.

2. Shows the signal strength of the cellular

network at your current location. The higher the

bar, the stronger the signal.

3. Shows the battery charge level. The higher the

bar, the more power in the battery.

4. The left selection key in standby mode is Menu.

5. The right selection key in standby mode is Contacts or Go to or it has an

operator-specific name. If you press the right selection key when it is

• Contacts, you can access the Contacts menu.

• the operator-specific key, you can access an operator’s homepage.

• Go to, you can then scroll to the specific function and select it. To set the

functions for your personal shortcut, see Personal shortcuts on page 105.

The functions can also be selected if you select the menu Go to, see Go to

(Menu 12) on page 162.

Wallpaper

You can set your phone to display a background picture, wallpaper, when the

phone is in standby mode. See Display settings on page 103.

Screen saver

The phone automatically activates a digital clock screen saver to save power in

standby mode. See Display settings on page 103.

Essential indicators in standby mode

You have received one or several text or picture messages. See Reading

and replying to an SMS message or an e-mail on page 53.

You have received one or several multimedia messages. See Reading and

replying to a multimedia message on page 60.

Your phone is connected to the chat service and the availability status is

online or offline, respectively. See Connecting to the chat service and

disconnecting on page 71.

You have received one or several chat messages and you are connected to

the chat service. See Connecting to the chat service and disconnecting on

page 71.

The phone’s keypad is locked. See Keypad lock (Keyguard) on page 33.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tone settings on page 102.

The alarm clock is set to On. See Alarm clock on page 127.

The countdown timer is running. See Countdown timer on page 139.

The stopwatch is running in the background. See Stopwatch on page 140.

When the (E)GPRS connection mode Always online is selected and the

(E)GPRS service is available, the indicator is shown on the top left of the

display. Refer to (E)GPRS connection on page 109.

When a (E)GPRS connection is established, the indicator is shown on the

top left of the display. Refer to (E)GPRS connection on page 109 and

Browsing the pages of a service on page 152.

The (E)GPRS connection is suspended (on hold), for example if there is an

incoming or outgoing call during a (E)GPRS dial-up connection. The

indicator is shown on the top right of the display.

Infrared connection indicator, see Infrared on page 106.

All your calls are diverted to another number, Divert all voice calls. If you

have two phone lines, the divert indicator for the first line is

and for

the second line . See Call settings on page 110.

or If you have two phone lines, the indicator displays the selected phone line.

See Call settings on page 110.

The loudspeaker has been activated, see Options during a call on page 37.

Calls are limited to a closed user group. See Security settings on page 116.

The timed profile is selected. See Profiles on page 101.

A headset, handsfree, loopset or music stand is connected to the phone.

Time and date

See Time and date settings on page 104.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys being accidentally pressed, for

example, when your phone is in your handbag.

• Locking the keypad

In standby mode, press Menu and then

within 1.5 seconds.

• Unlocking the keypad

Press Unlock and then

within 1.5 seconds, or if the Security keyguard is

set On, press Unlock and key in the security code.

To answer a call when the keyguard is on, press

. During a call, the phone

can be operated normally. When you end or reject the call, the keypad will

automatically be locked.

For automatic keypad locking, see Phone settings on page 112.

For locking the keypad during a call, see Options during a call on page 37.

Note: When Keyguard is on, calls may be possible to the emergency number

programmed into your phone (e.g. 112, 911 or other official emergency number).

Key in the emergency number and press

you have keyed in its last digit.

. The number is displayed only after

■ Over the air settings service

In order to use MMS, (E)GPRS and other wireless services, you need to have proper

connection settings on your phone. You may receive the settings directly as an

over the air message and you need to save the settings on your phone. For more

information on the availability of the settings, contact your network operator,

service provider or nearest authorised Nokia dealer.

You may be able receive the connection settings for (E)GPRS, multimedia

messages, synchronisation, chat and presence and for multi-mode browser.

When you have received the connection settings as an over the air message, and

the settings are not automatically saved and activated, Connection settings

received is displayed.

• To save the received settings, press Options and select Save. If the phone asks

Enter settings’ PIN:, key in the PIN code for the settings and press OK. For

availability of the PIN code, contact the service provider that supplies the

settings.

If no settings are saved yet, these settings are saved under the first free

connection set.

• To view the received settings first, press Options and select View. To save the

settings, press Save.

• To discard the received settings, press Options and select Discard.

To activate the settings, see, for example Making a connection to a service on

page 152.

3. Call functions

■ Making a call

1. Key in the phone number, including the area code. If you key in an incorrect

character, press Clear to delete it.

For international calls, press

twice for the international prefix (the +

character replaces the international access code) and then key in the country

code, the area code without the leading 0, if necessary, and the phone

number.

2. Press

3. Press

to call the number.

to end the call or to cancel the call attempt.

See also Options during a call on page 37.

Making a call using contacts

• To search for a name/phone number that you have saved in Contacts, see

Searching for a contact on page 89. Press

to call the number.

Calling your voice mailbox

• In standby mode, press and hold

, or press

and

If the phone asks for the voice mailbox number, key it in and press OK. See also

Voice messages on page 78.

Speed dialling a phone number

Before you can use speed dialling, assign a phone number to one of the speed-

dialling keys, from

either of the following ways:

• Press the speed-dialling key that you want and then press

, see Speed dials on page 97. Call the number in

• If Speed dialling is set to on, press and hold a speed-dialling key until the call is

started. See Call settings on page 110.

■ Answering or rejecting an incoming call

Press

to answer an incoming call and press

to end the call.

Press

to reject an incoming call.

If you press Silence, only the ringing tone is muted. Then either answer or reject

the call.

If a compatible headset supplied with the headset key is connected to the phone,

you can answer and end a call by pressing the key.

Tip: If the Divert if busy function is activated to divert the calls, for

example to your voice mailbox, rejecting an incoming call will also divert

the call. See Call settings on page 110.

Note that when somebody is calling you, the phone shows the caller’s name,

phone number or the text Private number or Call. If more than one name is found

in Contacts with the same seven last digits of the phone number as the caller’s

number, only the phone number will be displayed, if this is available. The phone

may display an incorrect name, if the caller’s number is not saved in Contacts but

there is another name saved with the same seven last digits in the phone number

as in the phone number of the caller.

Call waiting

During a call, press

to answer the waiting call. The first call is put on hold.

Press to end the active call.

To activate the Call waiting function, see Call settings on page 110.

■ Options during a call

Many of the options that you can use during a call are network services. For

availability, contact your network operator or service provider.

Press Options during a call for some of the following options:

•

Mute or Unmute, End call, End all calls, Contacts, Menu and Hold or Unhold,

New call, Private, Answer and Reject.

•

Conference to make a conference call that allows up to five persons to take

part in a conference call. During a call, make a call to a new participant (New

call). The first call is put on hold. When the new call has been answered, select

Conference to include the first participant in the conference call. To have a

private conversation with one of the participants, select Private and select the

desired participant. To rejoin the conference call, select Conference.

•

Lock keypad to activate the keypad lock.

•

Send DTMF to send DTMF (Dual Tone Multi-Frequency) tone strings, for

example, passwords or bank account numbers. The DTMF system is used by all

touch-tone telephones. Key in the DTMF string or search for it in Contacts and

press OK. Note that you can key in the wait character w and the pause

character p by repeatedly pressing

•

Swap to switch between the active call and the call on hold, Transfer to

connect a call on hold to an active call, and disconnect yourself from the calls.

Loudspeaker to use your phone as a loudspeaker during a call. Do not hold the

phone to your ear during loudspeaker operation. To activate/deactivate the

loudspeaker, select Loudspeaker/Handset or press Loudsp./Handset. The

loudspeaker is automatically deactivated when you end the call or call attempt

or connect the handsfree unit or headset to the phone.

If you have connected a compatible handsfree unit or the headset to the

phone, Handset in the options list is replaced with Handsfree or Headset and

the selection key Handset with Handsfr. or Headset, respectively.

Using the loudspeaker with the radio, see Using the radio on page 125.

4. Writing text

You can key in text, for example, when writing messages, using traditional or

predictive text input.

When you are writing text, the predictive text input is indicated by

and the

traditional text input by

indicated by , or

the character case by pressing

at the top left of the display. The character case is

next to the text input indicator. You can change

. The number mode is indicated by

, and

you can change between the letter and number mode by pressing and holding

■ Setting predictive text input on or off

When writing text, press Options and select Dictionary.

• To set the predictive text input on, select a language in the dictionary options

list. Predictive text input is only available for the languages on the list.

• To revert to traditional text input, select Dictionary off.

Tip: To quickly set the predictive text input on or off when writing text,

press

twice, or press and hold Options.

■ Using predictive text input

You can key in any letter with a single keypress. The predictive text input is based

on a built-in dictionary to which you can also add new words.

1. Start writing a word using the keys

one letter. The word changes after each keystroke.

Example: To write Nokia when the English dictionary is selected, press

and

. Press each key only once for

To insert a number while in letter mode, press and hold the desired number key.

For more instructions for writing text, see Tips for writing text on page 41.

2. When you have finished writing the word and it is correct, confirm it by adding

a space with

or by pressing any of the scroll keys. Pressing a scroll key

also moves the cursor.

If the word is not correct,

press

repeatedly or press Options and select Matches. When the word

that you want appears, confirm it.

If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, press Spell, key in the

word (traditional text input is used) and press Save. When the dictionary

becomes full, the new word replaces the oldest one that was added.

3. Start writing the next word.

Writing compound words

Key in the first part of the word and confirm it by pressing . Write the last part

of the word and confirm the word.

■ Using traditional text input

Press a number key,

, repeatedly until the desired character appears.

Not all characters available under a number key are printed on the key. The

characters available depend on the language selected in the Phone language

menu, see Phone settings on page 112.

To insert a number while in letter mode, press and hold the desired number key.

• If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or press any of the scroll keys and then key in the

letter.

•

The most common punctuation marks and special characters are available

under the number key

For more instructions for writing text, see Tips for writing text on page 41.

■ Tips for writing text

The following functions may also be available for writing text:

• To insert a space, press

• To move the cursor to the left, right, down or up, press the scroll keys

or , respectively.

• To delete a character to the left of the cursor, press Clear. Press and hold Clear

to delete the characters more quickly.

To delete all the characters at once when writing a message, press Optionsand

select Clear text.

• To insert a word when using the predictive text input, press Options and select

Insert word. Write the word using the traditional text input and press Save. The

word is also added to the dictionary.

• To insert a special character when using the traditional text input, press

or when using the predictive text input, press and hold

, or press Options

and select Insert symbol.

Press any of the scroll keys to scroll to a character and press Use to select the

character.

You can also scroll to a character by pressing

select the character by pressing

The following options are available when writing text messages:

• To insert a number while in letter mode, press Options and select Insert

, and

number. Key in the phone number or search for it in Contacts and press OK.

• To insert a name from Contacts, press Options and select Insert contact. To

insert a phone number or a text item attached to the name, press Options and

select View details.

5. Using the menu

The phone offers you an extensive range of functions, which are grouped into

menus. Most of the menu functions are provided with a brief help text. To view

the help text, scroll to the menu function you want and wait for 15 seconds. To

exit the help text, press Back. See Phone settings on page 112.

■ Accessing a menu function

By scrolling

1. To access the menu, press Menu.

2. Scroll with

through the menu (or with any of the scroll keys if

the grid menu view is selected) and select, for example, Settings by pressing

Select. To change the menu view, see Menu view in Display settings on page

103.

3. If the menu contains submenus, select the one that you want, for example Call

settings.

4. If the selected submenu contains further submenus, repeat step 3. Select the

next submenu, for example Anykey answer.

5. Select the setting of your choice.

6. Press Back to return to the previous menu level, and Exit to exit the menu.

By using a shortcut

The menus, submenus and setting options are numbered and you can access some

of them by using their shortcut number.

To access the menu, press Menu. Key in quickly, within two seconds, the index

number of the menu function you want to access. Note that to access the menu

functions in menu 1, press Menu and key in

and

and then key in the

rest of the desired shortcut number.

Press Back to return to the previous menu level, and Exit to exit the menu.

■ List of menu functions

1. Messages

1. Text messages

2. Multimedia msgs.

3. E-mail

4. Chat

5. Voice messages

6. Info messages

7. Message settings

8. Service commands

2. Call register

1. Missed calls

2. Received calls

3. Dialled numbers

4. Delete recent call lists

5. Call duration

6. GPRS data counter

7. GPRS connection timer

3. Contacts

1. Search

2. Add contact

3. Delete

4. My presence

5. Subscribed names

6. Copy

7. Settings

8. Speed dials

9. Voice tags

10.Info numbers

11.Service numbers ¹

12.My numbers

13.Caller groups²

4. Settings

1. Profiles

2. Tone settings

3. Display settings

4. Time and date settings

5. Personal shortcuts

6. Connectivity

7. Call settings

1. Shown if supported by your SIM card. For availability, contact your network operator or ser-

vice provider.

2. If Info numbers, Service numbers or both are not supported, the number of this menu item

changes accordingly.

8. Phone settings

9. Chat and my presence settings

10.Enhancement settings

11.Security settings

12.Restore factory settings

5. Gallery

1. View folders

2. Add folder

3. Delete folder

4. Rename folder

5. Usage rights list

6. Gallery downloads

6. Media

1. Camera

2. Radio

3. Voice recorder

7. Organiser

1. Alarm clock

2. Calendar

3. To-do list

4. Notes

8. Games

1. Select game

2. Game downloads

3. Memory

4. Settings

9. Applications

1. Select application

2. App. downloads

3. Memory

10.Extras

1. Calculator

2. Countdown timer

3. Stopwatch

4. Wallet

5. Synchronisation

11.Services

1. Home

2. Bookmarks

3. Service inbox

4. Download links

5. Settings

6. Go to address

7. Clear the cache

12.Go to

13.SIM services

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM

card.

6. Menu functions

■ Messages (Menu 1)

You can read, write, send and save text, multimedia and e-mail

messages. All messages are organised into folders.

Before you can send any text, picture, or e-mail message, you need to save your

message centre number, see Message settings on page 79.

Text messages (SMS)

Using the SMS (Short Message Service) your phone can send and receive multi-

part messages, which consist of several ordinary text messages (network service).

Invoicing is based on the number of ordinary messages that are required for a

multi-part message.

You can also send and receive text messages that contain pictures.

The text messages function uses shared memory, see Shared memory on page 19.

Note: The picture message function can be used only if it is supported by your

network operator or service provider. Only phones that offer picture message

features can receive and display picture messages.

Writing and sending messages

The number of available characters / the current part number of a multi-part

message are shown on the top right of the display, for example 120/2.

1. Press Menu, and select Messages, Text messages and Create message.

Tip: To start writing messages quickly, press in standby mode.

2. Key in a message. See Writing text on page 39. To insert text templates or a

picture into the message, see Templates on page 56 Each picture message is

made up of several text messages. Therefore, sending one picture message may

cost more than sending one text message.

3. To send the message, press Options and select Send.

4. Enter the recipient’s phone number or search for the phone number in

Contacts.

Press OK to send the message.

Note: When sending messages via the SMS network service, your phone may

display the words Message sent. This is an indication that the message has been

sent by your phone to the message centre number programmed into your phone.

This is not an indication that the message has been received at the intended

destination. For more details about SMS services, check with your service provider.

Options for sending a message

After you have written a message, press Options and select Sending options.

• To send a message to several recipients, select Send to many. When you have

sent the message to everyone you want to send it to, press Done.

• To send a message using a distribution list, select Send to list.

To create a distribution list, see Distribution lists on page 54.

• To send a message using a message profile, select Sending profile and then the

desired message profile.

To define a message profile, see Message settings on page 79.

Writing and sending e-mail via SMS

Before you can send an e-mail via SMS, you need to save the settings for sending

e-mail, see Message settings on page 79. To check e-mail service availability and

to subscribe to the service, contact your network operator or service provider. To

save an e-mail address in Contacts, see Saving multiple numbers or text items per

name on page 87.

1. Press Menu, and select Messages, Text messages and Create SMS e-mail.

2. Key in the recipient’s e-mail address or search for it in Contacts and press OK.

3. If you wish, you can key in a subject for the e-mail and press OK.

4. Key in the e-mail message. See Writing text on page 39. The total number of

characters that you can key in is shown on the top right of the display. The e-

mail address and subject are included in the total number of characters.

See also Templates on page 56. Pictures cannot be inserted.

5. To send the e-mail, press Options and select Send e-mail. If you have not saved

the settings for sending e-mails, the phone asks for the number of the e-mail

server.

Press OK to send the e-mail.

Note: When sending e-mails via the SMS network service, your phone may display

the words Message sent. This is an indication that the e-mail has been sent by your

phone to the e-mail server. This is not an indication that the e-mail has been

received at the intended destination. For more details about e-mail services, check

with your service provider.

Reading and replying to an SMS message or an e-mail

When you have received a message or an e-mail, the indicator

and the

number of new messages followed by message(s) received are shown.

The blinking indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages in the Inbox folder.

1. Press Show to view the new message, or press Exit to view it later.

Reading the message later:

Press Menu, and select Messages, Text messages and Inbox.

2. If more than one message has been received, select the one that you want to

read. An unread message is indicated by

in front of it.

3. While reading or viewing the message, press Options.

You can select an option, for example, to delete, forward or edit the message

as a text message or an e-mail, rename the message you are reading or to

move it to another folder.

Select Copy to calendar to copy text at the beginning of the message to your

phone’s calendar as a reminder note for the current day.

Select Message details to view, if available, the sender’s name and phone

number, the message centre used, and the date and time of receipt.

Select Use detail to extract numbers, e-mail addresses and website addresses

from the current message.

When reading a picture message, select Save picture to save the picture in the

Templates folder.

4. Select Reply to reply to a message. Select Original text to include the original

message in the reply, or select a standard answer to be included in the reply, or

select Empty screen.

When replying to an e-mail, confirm or edit the e-mail address and subject

first. Then write your reply message.

5. Press Options, select Send, and press OK to send the message to the displayed

number.

Inbox and sent items folders

The phone saves incoming text messages in the Inbox folder and sent messages in

the Sent items folder of the Text messages submenu.

Text messages that you wish to send later can be saved in the Archive, My folders

or Templates folder.

Distribution lists

If you need to send messages frequently to a fixed group of recipients, you can

define a distribution list for that purpose. You can save these distribution lists in

the phone’s memory. Note that the phone sends the message separately to each

recipient on the list. Therefore, sending a message using a distribution list may

cost more than to send a message to one recipient.

Make sure that the contacts you want to add to the distribution lists, are saved in

the phone’s internal contact memory.

Distribution lists use shared memory, see Shared memory on page 19.

Press Menu, and select Messages, Text messages and Distribution lists. The names

of the available distribution lists are shown.

• If you have not saved any lists, press Add to create one.

Key in the name for the list and press OK. Press Options, and select View list .

Press Add and select a contact from the phone’s contact memory. To add more

contacts to the created list, press Options, select Add contact and select a new

contact.

• Otherwise, scroll to a list, press Options and you can select

•

View list to view the contacts on the selected list. Press Options and you

can also delete or view the details of a selected contact or add a new

contact.

•

Add list to create a distribution list.

Rename list to change the name of the selected list.

Clear list to delete all names and phone numbers from the selected list.

Delete list to delete the selected distribution list.

If the message cannot be sent to certain recipients on the distribution list,

select Undelivered. Press Options and select

•

Resend to list to resend the message to the recipients on the Undelivered

list.

•

View list to view the list of the recipients to whom the latest message

sending failed.

•

Delete list to delete the Undelivered list.

View message to view the failed message.

Templates

Your phone includes text templates, indicated by , and picture templates,

indicated by

To access the template list, press Menu, and select Messages, Text messages and

Templates.

• To insert a text template into the message or the e-mail that you are writing or

replying to, press Options. Select Use template and select the template that

you want to insert.

• To insert a picture into the text message that you are writing or replying to,

press Options. Select Insert picture and select a picture to view it. Press Insert

to insert the picture into your message. The

indicator in the header of the

message indicates that a picture has been attached. The number of characters

that you can enter in a message, depends on the size of the picture.

To view the text and the picture together before sending the message, press

Options and select Preview.

Archive folder and My folders

To organise your messages, you can move some of them to the Archive folder, or

add new folders for your messages.

While reading a message, press Options. Select Move, scroll to the folder that you

want to move the message to and press Select.

To add or delete a folder, press Menu, and select Messages, Text messages and My

folders.

• To add a folder, press Options and select Add folder.

• To delete a folder, scroll to the folder that you want to delete, press Options

and select Delete folder.

Multimedia messages

Note: This function can be used only if it is supported by your network operator or

service provider. Only phones that offer compatible multimedia message features

can receive and display multimedia messages.

A multimedia message can contain text, sound and a picture or a video clip. The

phone supports multimedia messages that are up to 100 kB in size. If the

maximum size is exceeded, the phone may not be able to receive the message.

Depending on the network, you may receive a text message that includes an

Internet address where you can view the multimedia message.

If the message contains a picture, the phone scales it down to fit the display area.

The multimedia message function uses shared memory, see Shared memory on

page 19.

Note: If Allow multimedia reception is set to Yes or In home network, your operator

or service provider may charge you for every message you receive.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, WBMP, BMP, and PNG.

• Sound: Scalable Polyphonic MIDI (SP-MIDI), AMR audio and monophonic

ringing tones.

• Video clips in H.263 format with SubQCIF image size and AMR audio.

The phone does not necessarily support all variations of the aforementioned file

formats. If a received message contains any unsupported elements, they may be

replaced with the file name and the text Object format not supported.

Note that you are not able to receive any multimedia messages if you have a call

in progress, a game or another Java application running, or an active browsing

session over GSM data (see Keying in the service settings manually on page 151).

Because delivery of multimedia messages can fail for a variety of reasons, do not

rely solely upon them for essential communications.

Writing and sending a multimedia message

To set the settings for multimedia messaging, see Settings for multimedia

messages on page 81. To check availability and to subscribe to the multimedia

messaging service, contact your network operator or service provider.

1. Press Menu, and select Messages, Multimedia msgs. and Create message.

2. Key in a message. See Writing text on page 39.

To insert a picture or a sound clip, press Options, and select Insert and select

Image or Sound clip, respectively. The list of available folders in the Gallery is

shown. Open a specific folder, scroll to the desired picture or sound, press

Options and select Insert. When a picture or sound has been attached, it is

indicated with the file name in the message. Copyright protections may

prevent some images, ringing tones and other content from being copied,

modified, transferred or forwarded.

Instead of a picture and a sound clip, you can insert a video clip. Press Options,

and select Insert and Video clip.

To insert a name from Contacts, press Options, select More options and Insert

contact. Scroll to the desired name, press Options and select Insert contact.

To insert a number, press Options, select More options and Insert number. Key

in the number or search for it in Contacts, and press OK.

3. To view the message before sending it, press Options and select Preview.

4. To send the message, press Options and select Send to number (or Send to e-

mail or Send to many).

5. Enter the recipient’s phone number (or e-mail address) or search for it in

Contacts. Press OK and the message is moved to the Outbox folder for sending.

It takes more time to send a multimedia message than to send a text message.

While the multimedia message is being sent, the animated indicator

displayed and you can use other functions on the phone. If there is an

interruption while the message is being sent, the phone tries to resend it a few

times. If this fails, the message will remain in the Outbox folder and you can try

to resend it later.

The messages that you have sent will be saved in the Sent items folder if the

setting Save sent messages is set to Yes. See Settings for multimedia messages

on page 81. This is not an indication that the message has been received at the

intended destination.

Reading and replying to a multimedia message

When your phone is receiving a multimedia message, the animated indicator

is displayed. When the message has been received, the indicator

and the text

Multimedia message received are shown.

The blinking

indicates that the memory for multimedia messages is full, see

Multimedia messages memory full on page 61.

1. Press Show to view the message, or press Exit to view it later.

Reading the message later: Press Menu, and select Messages, Multimedia

msgs. and Inbox.

2. Scroll to view the message. Press Options and, for example, some of the

following options are available.

•

Delete message to delete a saved message.

Reply or Reply to all to reply to the message. To send the reply, press

Options and select Send.

•

Forward to no., Forward to e-mail or Forward to many to forward the

message.

Edit to edit a message. You can only edit messages you have created. See

Writing and sending a multimedia message on page 58.

•

Message details to view the subject, size and the type of message.

Details to view the details of the attached image or sound.

•

Play presentation to view the presentation attached in the message.

Save image to save the picture in the Gallery.

Save sound clip to save the ringing tone in the Gallery.

Save video clip to save the video clip in the Gallery.

• Refer also to the options in Gallery, see Gallery (Menu 5) on page 117.

Inbox, Outbox, Saved and Sent items folders

The phone saves the multimedia messages that have been received in the Inbox

folder of the Multimedia msgs. submenu.

Multimedia messages that have not yet been sent are moved to the Outbox folder

of the Multimedia msgs. submenu.

The multimedia messages that you wish to send later, can be saved in the Saved

items folder of the Multimedia msgs. submenu.

The multimedia messages that have been sent are saved in the Sent items folder of

the Multimedia msgs. submenu if the setting Save sent messages is set to Yes. See

Settings for multimedia messages on page 81.

Multimedia messages memory full

When you have a new multimedia message waiting and the memory for the

messages is full, the indicator

blinks and Multimedia memory full, view

waiting msg. is shown. To view the waiting message, press Show. To save the

message, press Options, select Save message and delete old messages by first

selecting the folder and then the oId message to be deleted.

To discard the waiting message, press Exit and Yes. If you press No, you can view

the message.

Deleting messages

1. To delete text messages, press Menu, and select Messages, Text messages and

Delete messages.

To delete all messages from all folders, select All messages and when Delete all

messages from all folders? is displayed, press OK. If the folders contain unread

messages, the phone will ask whether you want to delete them also.

To delete multimedia messages, press Menu, and select Messages, Multimedia

msgs. and Delete messages.

2. To delete all messages from a folder, select the folder from which you want to

delete the messages and press OK. If the folder contains unread messages, the

phone will ask whether you want to delete them also.

E-mail messages

Note: When sending e-mails, your phone may display the words Message sent.

This is an indication that the e-mail has been sent by your phone to the e-mail

server. This is not an indication that the e-mail has been received at the intended

destination. For more details about e-mail services, check with your service

provider.

You can write, send and read e-mails with your phone. The e-mail function on

your phone may be used to support your other compatible e-mail applications, for

example the e-mail application that you use in the office or at home. Your phone

supports POP3 and IMAP4 e-mail servers.

E-mails use shared memory, see Shared memory on page 19.

Before you can send and retrieve any e-mails, you may need to do the following:

• You need an active e-mail account and e-mail service settings. For the

availability of your e-mail account and e-mail service settings, contact your e-

mail service provider. To set the settings, press Menu and select Services,

Settings and Connection settings. See Keying in the service settings manually

on page 151.

• Activate the e-mail service settings that you have obtained from your network

operator or e-mail service provider. To activate the settings, press Menu and

select Messages, E-mail and Connect via. See Options available for an e-mail

application on page 68.

• To set the e-mail settings on your phone, press Menu and select Messages, E-

mail, Open and Settings. See E-mail settings on page 66.

Writing and sending an e-mail

You can write your e-mail message before connecting to the e-mail service, or

connect to the service first, and then write and send your e-mail.

1. Press Menu and select Messages, E-mail, Open and Create e-mail.

2. Key in the recipient’s e-mail address, press Options and select OK. Or:

Press Options and select Search to search for the e-mail address in contacts

and select OK.

3. You can key in a subject for the e-mail if you want, then press Options and

select OK.

4. Key in the e-mail message, see Writing text on page 39. The number of

characters that you can key in is shown on the top right of the display.

5. To send the e-mail message, press Options and select Send e-mail. Select

•

Send now to send the e-mail immediately. If you have not already

connected to the e-mail account, your phone establishes the connection

first and then sends the e-mail.

•

Send later to send your e-mail later and the e-mail is saved in the Outbox

folder. If you want to edit or continue writing your e-mail later, you can

save it in Drafts by selecting Save draft msg..

Sending the e-mail later: Press Menu and select Messages, E-mail, and

Send now or Send and retrieve.

Downloading e-mail messages from your e-mail account

The e-mail function uses shared memory, see Shared memory on page 19.

1. Press Menu and select Messages, E-mail, Open and Retrieve to download e-

mail messages that have been sent to your e-mail account.

Or:

Press Menu and select Messages, E-mail, Open and Send and retrieve to

download new e-mail messages and to send e-mails that have been saved in

the Outbox folder.

If the message memory is full, delete some of your older messages before you

start to download new messages.

2. Your phone makes a connection to the e-mail service. A status bar is shown

while your phone is downloading e-mail messages to your phone.

3. Press Select to view the new message in Inbox, or press Back to view it later.

Reading the e-mail later: Press Menu, select Messages, E-mail, Open and

Inbox.

4. If more than one message is received, select the message that you want to

read. An unread text message is indicated by

Replying to an e-mail message

1. While reading or viewing the message, press Options.

You can, for example, delete, reply, reply to all, forward or archive the message

that you are reading.

2. Select Reply to reply to an e-mail. Select Original text to include the original

message in the reply or select Empty screen.

When replying to an e-mail, first confirm or edit the e-mail address and

subject, then write your reply.

3. Press Options and select Send e-mail and Send now to send the message.

Inbox, Outbox, Deleted items, Sent items, Drafts and Archive folders

Your phone has the following folders in the E-mail menu:

•

Inbox for saving e-mails that you have downloaded from your e-mail account.

•

Outbox for saving e-mails that have not been sent, if you have selected Send

later, see Writing and sending an e-mail on page 63.

•

Deleted items for e-mails that have been deleted.

Sent items for saving e-mails that have been sent.

Drafts for saving unfinished e-mails.

Archive for organising and saving your e-mails.

E-mail settings

1. Press Menu and select Messages, E-mail, Open and Settings.

2. Select Mailbox in use to view a list of mailboxes, then scroll to the one that you

want to edit and select it.

You have five mailboxes that you can use for the e-mail settings of your phone

for saving and retrieving e-mail messages.

3. Select Edit active mailbox and select each of the settings one by one. Key in all

the required settings according to the information you have received from your

e-mail service provider.

•

Mailbox name. Key in the name that you want to use for the mailbox.

E-mail address. Key in your e-mail address.

My name. Key in your name or nickname if you want the recipient to see it.

Outgoing (SMTP) server. Key in the address of the e-mail server.

Outgoing (SMTP) port. Key in the number of the e-mail server port for

outgoing e-mail. The most common default value is 25.

•

Use SMTP authorisation. If your e-mail service provider requires

authentication for sending e-mails, set the setting to on. You must also

define your SMTP user name and SMTP password.

•

SMTP user name. Key in the user name for outgoing e-mails that you

have obtained from your e-mail service provider.

•

SMTP password. Key in the password for outgoing e-mails. If you have

not defined a password, you may be asked to define one when your

phone connects to your e-mail account.

•

Include signature. Confirm your selection if you want to add a predefined

signature to your e-mail.

Incoming (POP3/IMAP) server. Key in the e-mail server address for incoming

e-mail (either POP3 or IMAP4).

Incoming (POP3/IMAP) port. Key in the port number that you have obtained

from your e-mail service provider.

POP3/IMAP user name. Key in the user name to access the mailbox. If you

have not defined your SMTP user name, the e-mail server uses this user

name instead.

•

POP3/IMAP password. Key in the password to access the mailbox. If you

have not defined your SMTP password, the e-mail server uses POP3/IMAP

password instead.

Reply-to address. Key in the e-mail address to which you want the replies

to be sent, if it differs from your e-mail address.

•

Incoming server type. Select either POP3 or IMAP4. If both types are

supported, select IMAP4. Changing the server type also changes the

incoming port number.

Secure login APOP. Select On if your connection requires an encrypted

This option is only shown, if you have selected POP3 as your mailbox type.

Using encrypted login enables increased security for user names and

passwords. It does not increase security for the connection itself.

•

Retrieve mails. Key in the number of e-mails that you want to retrieve at a

time.

Options available for an e-mail application

Press Menu and select Messages and E-mail. Select

•

Connect via to activate the network connection settings for your e-mail

function. Select Application to activate the settings that are used for the e-

mail application or select Default to confirm that your e-mail function uses

the same settings as your WAP browser, see Keying in the service settings

manually on page 151. Contact your e-mail service provider, if in doubt.

•

Details to give additional information about the application.

Chat

Note: This function can be used only if it is supported by your network operator or

service provider. Only phones that offer compatible chat features can receive and

display chat messages.

Chat is a way of sending short, simple text messages that are delivered over TCP/IP

protocols to online users (network service). Your contact list shows you when the

contacts on the list are online and available to participate in a chat conversation.

When you have written and sent your message, it stays on the display. The reply

message appears below your original message.

Before you can use chat, you need to subscribe to the service. To check the

availability, charging and to subscribe to the service, contact your network

operator or service provider, from whom you also receive your unique ID and

password and the settings for the chat.

To set the required settings for the chat service, see Chat and Presence settings on

page 114.

While you have connected to the chat service, you can use the other functions of

the phone, and the chat session is active in the background.

Chat uses shared memory, see Shared memory on page 19.

Basic steps for the chat

1. To enter the chat menu (offline), see Entering the chat menu on page 70.

2. To connect to the chat service (online), see Connecting to the chat service and

disconnecting on page 71.

3. To start a chat with a contact, see Chat contacts in Starting a chat

conversation on page 71.

To create you own chat contact lists, see Contacts for the chat on page 76.

4. To join a public chat, see Groups in Starting a chat conversation on page 71.

To join a group chat via invitation message, see Accepting or rejecting a chat

invitation on page 73.

To create your own chat groups, or to join or delete a public group, see Groups

on page 77.

5. To edit your own information, see Editing your own information on page 75.

6. To search users and groups, see Search in Starting a chat conversation on page

71.

7. To read a message for a new chat, see Reading a received chat message on

page 73.

8. To write and send messages during an active chat, see Participating in a chat

conversation on page 74.

9. To view, rename or delete saved chat conversations, select Saved convers.

when you have entered the Chat menu.

10.To block/unblock contacts, see Blocking and unblocking messages on page 76.

11.To disconnect from the chat service, see Connecting to the chat service and

disconnecting on page 71.

Entering the chat menu

To enter the Chat menu, that is the offline chat, press Menu, and select Messages

and Chat. You can select

•

To set the phone to automatically connect to the chat service when you enter

the Chat menu, see Connecting to the chat service and disconnecting on page

71.

•

Saved convers. to view, erase or rename the chat conversations that you have

saved during a chat. You can select Saved convers. also when you have

connected to the chat service.

Connect settings to edit the settings needed for chat messaging and Presence

connection. See Chat and Presence settings on page 114. You can select

Connect settings also when you have connected to the chat service.

Connecting to the chat service and disconnecting

To connect to the chat service, enter the Chat menu, and select Login. When the

phone has successfully connected, Logged in is displayed.

Tip: To set the phone to automatically connect to the chat service when

you enter the Chat menu, connect to the chat service, select My

information, Automatic login and On Chat start-up.

To disconnect from the chat service, select Logout.

Starting a chat conversation

Enter the Chat menu and connect to the chat service. You can select

•

Conversations to view the list of new and read chats or invitations to chats

during the current active chat session. Scroll to the message you want and

press Options. Select Read invitation to read the invitation or Open to read the

message.

indicates the new and

the read chat messages.

indicates the new and

read group messages.

indicates the invitations.

•

Chat contacts includes the contacts that you have added from the phone’s

contacts memory. Scroll to the contact with whom you would like to chat,

press Options and select Chat.

If you have received a new message from a contact, it is indicated with

indicates the online and

memory.

indicates a blocked contact, refer to Blocking and unblocking messages on

page 76.

the offline contacts in the phone’s contacts

To add contacts to the list, see Contacts for the chat on page 76.

•

Groups and Public groups. The list of bookmarks to public groups provided by

the network operator or service provider is displayed. To start a chat

conversation, scroll to a group, press Options and select Join group. Enter your

screen name that you want to use as a nickname in the conversation. When

you have successfully joined in the group conversation, the phone shows

Joined group: and the group name and you can start a group chat. To create a

private group, see Groups on page 77.

Search and select Users or Groups to search for other chat users or public

groups on the network.

• If you select Users, you can search for a user by phone number, screen

name, e-mail address or name.

• If you select Groups , you can search for a group by a member in the group

or by group name, topic or ID.

To start the chat when you have found the user or the group you want, press

Options and select Chat or Join group.

• To start a chat from Contacts, see Viewing the subscribed contacts on page 94.

Accepting or rejecting a chat invitation

In standby mode, when you have connected to the chat service and you receive a

new chat invitation, New invitation received is displayed. Press Read to read it.

If more than one invitation is received, the number of messages followed by new

invitations received is displayed. Press Read, scroll to the invitation you want,

press Options and select Read invitation. Press Options and select

•

Accept to join the private group conversation. Enter the screen name that you

want to use as a nickname in the chat conversation. When you have

successfully joined in the conversation, the phone shows Joined group: and the

group name.

•

Reject and you can key the reason for your rejection.

Delete to delete the invitation.

Reading a received chat message

In standby mode, when you have connected to the chat service and you receive a

new chat message that is not a message to an active chat conversation, New

instant message is displayed. Press Read to read it.

• If more than one message is received, the number of messages followed by

new instant messages is displayed. Press Read, scroll to the message you want,

press Options and select Open.

New messages received during an active chat session are held in the

Conversations of the Chat menu. If you have received a chat message from a

person whose contact information is not in your chat contact list in Chat contacts,

the ID of the sender is shown. If the contact information is in the phone’s memory

for contacts and the phone recognises it, the name of the person is shown. To save

a new contact that is not in the phone’s memory for contacts, press Options and

select

•

Save contact and enter the name of the person. The contact is saved in the

phone’s memory.

•

Add to contact, select the contact in the phone’s contact memory that you

want to add the new detail to and press Add.

Participating in a chat conversation

Join in or start a chat (conversation), and you can just start to write your message

(or press Options and select Write message to write your message).

Tip: If you receive a new message during a chat from a person that is not

within the chat conversation, the indicator

is shown on the top of the

display.

Key in your message and press Options and some of the following options are

available:

•

Send to send the message to the network. Your screen name is added to the

message.

Tip: To quickly send the message, press

after you have finished

the message.

View conversation to view the ongoing conversation. To save the chat

conversation, press Save and enter the name for the conversation.

•

Save contact, refer to Reading a received chat message on page 73.

Add to contact, refer to Reading a received chat message on page 73.

Group members to view the members in the selected private group that you

have created.

•

End conversation to close the ongoing conversation.

Dictionary refer to Setting predictive text input on or off on page 39.

Editing your own information

Enter the Chat menu and connect to the chat service. Select My information to

view and edit your own availability information or screen name. Select Availability

and Available for all or Avail. for contacts (or Appear offline) toallow all the other

chat users or only the contacts on your chat contact list to see you as being online

when you have connected to the chat service. When you are connected to the

chat service,

others.

indicates that you are online and

that you are not visible to

Contacts for the chat

You can add contacts from the phone’s contacts memory to the chat contacts list.

Connect to the chat service, select Chat contacts, and

• to add a contact, press Options and select Add contact, or if you have no

contacts added, press Add. Select from the contacts the name that you want

to add to the list of chat contacts. When the contact is added, the phone

displays Added to Chat contacts: and the contact name.

Scroll to a contact, press Options and select

•

Chat to start a chat.

Contact info to view the details of the selected contact. If you want to edit the

details, see Editing or deleting details in the contacts on page 90.

•

Block contact (or Unblock contact) to block (or unblock) the messages from the

selected contact.

•

Add contact to add a new contact from the phone’s contact memory.

Remove contact to remove a contact from the chat contact list.

Blocking and unblocking messages

Connect to the chat service and select Conversations or Chat contacts. Select

from the contacts list the contact from whom you want to block the incoming

messages. Press Options, select Block contact and press OK to confirm.

To unblock the messages, connect to the chat service and select Blocked list. Scroll

to the contact from whom you want to unblock the messages and press Unblock.

You can also unblock the messages from the contact list, see Contacts for the chat

on page 76.

Groups

You can create your own private groups for a chat session, or use the public

groups where provided by the service provider. The private groups exist only

during a chat session. You can add to a private group only the online contacts that

are in your contact list and thus in the phone’s contacts memory, see Saving

names and phone numbers (Add contact) on page 86.

Public groups

You can bookmark the public group that your service provider may maintain.

Connect to the chat service, select Groups and Public groups. Press Options and

select

•

Join group and if you are not in the group, enter your screen name.

Delete group to delete a group from your group list.

Search groups to search a group by group member or by group name, topic or

ID.

Creating a private group

Connect to the chat service, select Groups and Create group. Enter the name for

the group and then the screen name for yourself to be used as your nickname in

this group. You can use another screen name in another group. Press Add and the

list of contacts is shown. Select a name from the contacts list to add it to the

private group list. To add more names to the list, press Options and select Add

member and select a new name.

To remove a name from the private group list, scroll to it, press Options and select

Remove member.

You need to send an invitation to the new members you have added to the group,

press Options and select Send invitation. When the phone displays Invitation:, key

in the text for the invitation.

You can only select online contacts, indicated by

from the phone’s contacts

memory. Offline contacts are indicated by

Voice messages

The voice mailbox is a network service and you may need to subscribe to it. For

more information and for the voice mailbox number, contact your service

provider.

Press Menu, and select Messages and Voice messages. Select

•

Listen to voice messages to call your voice mailbox at the phone number that

you have saved in the Voice mailbox number menu.

If you have two phone lines available (network service), each phone line may

have its own voice mailbox number. Refer to Call settings on page 110.

•

Voice mailbox number to key in, search for or edit your voice mailbox number

and press OK to save it.

If supported by the network, the indicator

will show new voice messages.

Press Listen to call your voice mailbox number.

Tip: Pressing and holding

calls your voice mailbox.

Info messages

With the info message network service you can receive messages on various

topics from your service provider. These messages may include, for example,

weather or traffic conditions. For availability, topics and the relevant topic

numbers, contact your service provider.

Message settings

The message settings affect the sending, receiving and viewing of messages.

Settings for text and e-mail messages

1. Press Menu, and select Messages, Message settings, Text messages and

Sending profile.

2. If more than one message profile set is supported by your SIM card, select the

set you want to change.

• Select Message centre number to save the phone number of the message

centre that is required for sending text messages. You will receive this

number from your service provider.

• Select Messages sent via to select the message type Text, E-mail, Paging or

Fax.

• Select Message validity to select the length of time for which the network

should attempt to deliver your message.

• For message type Text, select Default recipient number to save a default

number for sending messages for this profile.

For message type E-mail, select E-mail server to save the e-mail server

number.

• Select Delivery reports to ask the network to send delivery reports about

your messages (network service).

• Select Use GPRS and select Yes to set GPRS as the preferred SMS bearer.

Also, set the GPRS connection to Always online, see (E)GPRS connection on

page 109.

• Select Reply via same centre to allow the recipient of your message to send

you a reply via your message centre (network service).

• Select Rename sending profile to change the name of the selected message

profile. The message profile sets are only displayed if your SIM card

supports more than one set.

Overwrite settings

When the text message memory is full, the phone cannot receive or send any new

messages. However, you can set the phone to automatically replace old text

messages in the Inbox and Sent items folders with the new ones.

Press Menu, and select Messages, Message settings, Text messages and

Overwriting in sent items or Overwriting in inbox. Select Allowed to set the phone

to replace the old text messages with new ones in the Sent items or the Inbox

folder, respectively.

Settings for multimedia messages

You may receive the multimedia connection settings as an over the air message

from the network operator or service provider. To receive the settings over the air,

see Over the air settings service on page 34.

Keying in the settings manually

Press Menu, and select Messages, Message settings and Multimedia msgs.. Select

•

Save sent messages. Select Yes to set the phone to save sent multimedia

messages in the Sent items folder. If you select No, the sent messages are not

saved.

•

Delivery reports to ask the network to send delivery reports about your

messages (network service).

Scale image down to define the image size when you insert the image to the

multimedia message.

Allow multimedia reception. Choose No, Yes or In home network to use the

multimedia service. If you choose In home network, you cannot receive

multimedia messages when outside your home network. The default setting is

In home network.

•

Incoming multimedia messages. Select Retrieve to set the phone to

automatically fetch newly received multimedia messages, or select Reject if

you do not wish to receive multimedia messages. This setting is not shown if

the Allow multimedia reception is set to No.

Connection settings to define connection settings for retrieving multimedia

messages. First select Active multimedia settings and activate the set in which

you want to save the connection settings. Select Edit active multimedia

settings and edit the active settings.

Select each of the settings one by one and key in all the required settings.

Contact your network operator or service provider for the the settings.

•

Settings' name. Key in the new name for the connection set and press OK.

Homepage. Key in the homepage address of the service provider that you

want to use, press

for a dot, and press OK.

•

Proxies. Select Enable or Disable.

• If you have enabled the proxies, you can select Primary proxy and

Secondary proxy, and edit them.

•

Data bearer. Select GPRS.

Bearer settings to set the settings for the selected bearer.

•

GPRS access point. Key in the access point name to establish a

connection to a GPRS network and press OK.

•

Authentication type. Select Secure or Normal.

User name. Key in the user name and press OK.

Password. Key in the password and press OK.

•

Allow adverts. You can receive or reject advertisements. This setting is not

shown if the Allow multimedia reception is set to No.

Font size setting

To select the font size for reading and writing messages, press Menu, and select

Messages, Message settings, Other settings and Font size.

Service commands

Press Menu, and select Messages and Service commands. Key in and send service

requests (also known as USSD commands), such as activation commands for

network services, to your service provider.

■ Call register (Menu 2)

The phone registers the phone numbers of missed, received and

dialled calls, and the approximate length of your calls.

The phone registers missed and received calls only if the network supports these

functions, and the phone is switched on and within the network’s service area.

When you press Options in the Missed calls, Received calls and Dialled numbers

menu, you can, for example, view the date and the time of the call, edit or delete

the phone number from the list, save the number in Contacts or send a message to

the number.

Recent calls lists

Press Menu, and select Call register and then select

•

Missed calls to view the list of the last 20 phone numbers from which

somebody has tried to call you (network service). The number in front of the

(name or) phone number indicates the amount of call attempts from that

caller.

Tip: When a note about missed calls is displayed, press List to access

the list of phone numbers. Scroll to the number you would like to call

back and press

•

Received calls to view the list of the last 20 phone numbers from which you

have most recently accepted calls (network service).

Dialled numbers to view the list of the 20 phone numbers that you have most

recently called or attempted to call.

Tip: In standby mode, press

numbers. Scroll to the number or name you want, and press

once to access the list of dialled

call the number.

•

Delete recent call lists to delete the recent calls lists. Select whether you want

to delete all the phone numbers in the recent calls lists, or only those numbers

in the missed calls, received calls or dialled numbers lists. You cannot undo the

operation.

Call counters and call timers

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding-off for billing, taxes and so forth.

Press Menu, and select Call register and then select

•

Call duration, scroll to view the approximate duration of your incoming and

outgoing calls in hours, minutes and seconds. The security code is required to

clear the timers.

If you have two phone lines available (network service), each phone line has its

own call duration timers. The timers of the currently selected line are

displayed. Refer to Call settings on page 110.

•

GPRS data counter. Scroll to check the amounts of data that were sent or

received in the last session, data sent and received in total, and to clear the

counters. The counter unit is a byte. The security code is required to clear the

counters.

GPRS connection timer. Scroll to check the duration of the last GPRS

connection or the total GPRS connection time. You can also clear the timers.

The security code is required to clear the timers.

■ Contacts (Menu 3)

You can save names and phone numbers (Contacts) in the

phone’s memory and in the SIM card’s memory.

• The phone’s memory may save up to 500 names with numbers and text notes

about each name. You can also save an image for a certain number of names.

The number of names that can be saved depends on the length of the names,

and the number and length of the phone numbers and text items.

Contacts use shared memory, see Shared memory on page 19.

• The phone supports SIM cards that can save up to 250 names and phone

numbers. Names and numbers saved in the SIM card’s memory, are indicated

In dynamic contacts (Presence) you can publish your current availability status to

communicate to anyone who has access to this service and who is requesting this

information. You can view the availability status of any of the contacts that you

have subscribed to in the Subscribed names menu and in the detailed view of a

name in Contacts.

Selecting settings for contacts

Press Menu and select Contacts and Settings. Select

•

Memory in use to select the memory you want to use for your contacts. To

recall names and numbers from both memories for contacts, select Phone and

SIM. In that case, the names and numbers will be saved in the phone’s memory.

•

Contacts view to select how the names, numbers and images in contacts are

displayed.

Memory status to view how much memory is available in the selected memory

for contacts.

Saving names and phone numbers (Add contact)

Names and numbers will be saved in the used memory, see Selecting settings for

contacts above.

1. Press Menu and select Contacts and Add contact.

2. Key in the name and press OK. See Using traditional text input on page 41.

3. Key in the phone number, and press OK. To key in the numbers, see Making a

call on page 35.

4. When the name and number are saved, press Done.

Tip: Quick save In standby mode, key in the phone number. Press Options,

and select Save. Key in the name, press OK and Done.

Saving multiple numbers or text items per name

You can save different types of phone numbers and short text items per name in

the phone’s internal memory for contacts.

The first number saved is automatically set as the default number and it is

indicated with a frame around the number type indicator, for example

. When

you select a name from contacts, for example to make a call, the default number is

used unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM. See

Selecting settings for contacts on page 86.

2. To access the list of names and phone numbers, press

in standby mode.

3. Scroll to the name saved in the phone’s internal memory for the contact to

which you want to add a new number or text item, and press Details.

4. Press Options and select Add number or Add detail.

5. To add a number or detail, select one of the number types or text types,

respectively.

• If you select the text type User ID:

Select Search to search for an ID by a mobile phone number or an e-mail

address in the server of the operator or service provider if you have

connected to the presence service. See My presence on page 91. If only one

ID is found, it is automatically saved. Otherwise, to save the ID, press

Options, and select Save.

To key in the ID, select Enter ID manually. Key in the ID and press OK to save

it.

To change the number or text type, select Change type in the options list. Note

that you cannot change the type of an ID when it is on the Chat contacts or in

the Subscribed names list.

To set the selected number as the default number, select Set as default.

6. Key in the number or text item and press OK to save it.

7. Press Back and then Exit to return to standby mode.

Adding an image to a name or number in contacts

You can add an image in supported format to a name or number saved in the

phone’s internal memory.

Press

in standby mode, scroll to the contact you want to add an image to

and press Details. Press Options and select Add image. The phone opens the list of

folders in the Gallery. Scroll to the desired image, press Options and select Save to

contacts. A copy of the image is added to the contact.

Searching for a contact

1. Press Menu and select Contacts and Search, or to quickly find a contact name,

press

in standby mode.

2. You can key in the first characters of the name you are searching for in the

pop-up window.

Press

and

to scroll through the names in the list, and and to

move the cursor in the pop-up window.

3. Scroll to the contact name you want, and press Details. Scroll to view the

details of the selected contact.

Depending on the Contacts view selection in Selecting settings for contacts on

page 86, the subscribed contacts are shown differently. Either only the

availability indicator or the availability indicator, personal logo and the status

message are shown. Press Details and all of the dynamic information is shown.

Tip: Viewing a contact. To quickly view a specific name with the default

phone number, press and hold

at the name while scrolling through

the contact names.

To view the status message in full, press Details and press and hold

the dynamic contact while scrolling through the contact names.

Deleting contacts

Press Menu and select Contacts and Delete to delete contacts and all the details

attached to them.

• To delete contacts one by one, select One by one and scroll to the name you

want to delete. Press Delete and press OK to confirm.

If the contact has an ID on the Chat contacts or in the Subscribed names list,

the note Presence information will be deleted is shown before the contact is

deleted.

• To delete contacts all at once, select Delete all and then scroll to either of the

memories Phone or SIM card and press Delete. Press OK and confirm with the

security code.

Editing or deleting details in the contacts

Search for the contact you want to edit or delete and press Details. Scroll to the

name, number, text item or image you want to edit or delete and press Options.

• To edit a name, number or text item or to change image, select Edit name, Edit

number, Edit detail or Change image, respectively.

Note that you cannot edit or delete an ID when it is on the Chat contacts or in

the Subscribed names list.

• To delete a number or text item, select Delete number or Delete detail,

respectively.

• To delete an image attached to the contact, select Delete image. Deleting an

image from contacts does not delete it from Gallery.

My presence

The presence service (network service) provides you with enhanced

communication services which you can share, for example, with your family,

friends and colleagues. You can publish your current presence status to others

who have access to this service and who are requesting this information. The

requested information is shown in Subscribed names in the viewers Contacts

menu. You can control the information that you want to share with others, and

personalise this information, and control the list of persons who are viewing your

own presence information.

To check the availability of the presence service, contact your network operator or

service provider. You need to access the presence service before you can share

your presence information with others. Other viewers will need access to the

presence service and a compatible phone to see your presence information.

Press Menu and select Contacts and My presence. Select

•

Connect to My presence service (or Disconnect) to connect to (or to disconnect

from) the service.

•

My current presence to change your presence status. Select

•

View current presence and select Private presence or Public presence to

view your current private or public status.

•

My availability to set your availability status to Available indicated by

or to Busy indicated by , or to Not available indicated by

•

My presence message and key in the text to be shown to other persons or

press Options and select Previous msgs. and select an old message as the

status message.

•

My presence logo to select the default logo of the availability status or

personalise one from the Graphics folder in the gallery.

Show to to select the groups with whom you want to share or not share

your presence status information. Select Private and public, Private viewers

or No one.

•

Current viewers and select

•

Current viewers to view all the persons who have subscribed to your

presence information

Private list to view the list of the persons who are allowed to view your

personalised presence information.

Blocked list to view all the persons you have blocked from viewing your

presence information.

Settings and select

•

Show current presence in idle to show the current status indicator in

standby mode.

•

Synchronise with profiles to select whether you want to update your My

presence message and My availability manually or automatically by linking

them to the currently active profile. Refer also to Profiles on page 101. Note

that you cannot link a personalized status logo to a Profile.

•

Connection type to select if the phone connects automatically to the

service when the phone is switched on.

•

Connect settings, see Chat and Presence settings on page 114.

Subscribed contacts

You can create a list of contacts whose presence status information you want to

be aware of. You can view the information if the contacts allow you to view it and

if it is not prevented by the contact or network. You can view these subscribed

contacts either by scrolling through the contacts or via the Subscribed names

menu.

Make sure that the memory in use is either Phone or Phone and SIM. See Selecting

settings for contacts on page 86.

To connect to the Presence service, press Menu and select Contacts, My presence

and Connect to My presence service. You can view the subscribed contacts even

when you are not connected to the presence service but you can not see the

presence status information about the contact.

Adding contacts to the subscribed contacts

1. Press Menu and select Contacts and Subscribed names. If you have not

connected to the Presence service, the phone asks if you want to connect now.

2. If you have not any contacts on your list, press Add. Otherwise, press Options

and select Subscribe new. The list of your contacts is shown.

3. Select a contact from the list and if the contact has an ID saved, the contact is

added to the subscribed contacts list. If there are more than one ID, select one

of them. After subscription to the contact, Subscription activated is shown.

Tip: To subscribe to a contact from Contacts list, press

in standby

mode and scroll to the contact you want to subscribe to. Press Details and

press Options. To subscribe, select Request presence and select As

subscription.

If you only want to view the presence information but not to subscribe to a

contact, select Request presence and One time only.

Viewing the subscribed contacts

Refer also to Searching for a contact on page 89 to view the presence information.

1. Press Menu and select Contacts and Subscribed names.

The status information of the first contact on the dynamic contacts list is

displayed. The information that the person wants to give to the others may

include text and some of the following icons:

or indicate that the person is either available, discreet or not

available.

indicates that the person’s presence information is not available.

2. Press Options and select

•

Subscribe new to add a new contact to the list of subscribed contacts.

View details to view the details of the selected contact.

Chat to start a chat conversation.

•

Send message to send a text message to the selected contact.

Send e-mail to send an e-mail to the selected contact.

Send bus. card to send a business card from the selected contact.

Unsubscribe to remove the selected contact from the list of subscribed

contacts.

Unsubscribing a contact

• To unsubscribe a contact from the Contacts list, press

in standby mode

and scroll to the contact you want to unsubscribe. Press Details and select the

ID and press Options. To unsubscribe, select Unsubscribe and press OK to

confirm.

• To unsubscribe via the Subscribed names menu, see Viewing the subscribed

contacts on page 94.

Copying contacts

You can copy names and phone numbers from the phone’s memory to your SIM

card’s memory and vice versa. Note that any text items saved in the phone’s

internal memory, such as e-mail addresses, will not be copied to the SIM card.

1. Press Menu and select Contacts and Copy.

2. Select the copying direction, From phone to SIM card or From SIM card to

phone.

3. Select One by one, All or Default numbers.

• If you select One by one, scroll to the name you want to copy and press

Copy.

Default numbers is shown if you copy from the phone to the SIM card. Only the

default numbers will be copied.

4. To choose whether you want to keep or delete the original names and numbers,

select Keep original or Move original.

• If you select All or Default numbers, press OK when Start copying? or Start

moving? is displayed.

Sending and receiving a business card

You can send and receive a person’s contact information from a compatible device

that supports the vCard standard as a business card.

When you have received a business card, press Show and Save to save the

business card in the phone’s memory. To discard the business card, press Exit and

then OK.

To send a business card, search for the name and phone number you want to send

from contacts, press Details and Options and select Send bus. card.

• To send the business card via IR, select Via infrared. Refer to Infrared on page

106.

• To send the business card as an Over The Air (OTA) message if it is supported by

the network, selectVia text message.

Speed dials

To assign a number to a speed-dialling key, press Menu and select Contacts and

Speed dials and scroll to the speed-dialling key number that you want.

Press Assign, or if a number has already been assigned to the key, press Options

and select Change. Press Search, and select first the name and then the number

you want to assign. If the Speed dialling function is off, the phone asks whether

you want to activate it. See also Speed dialling in Call settings on page 110.

To make a call using the speed-dialling keys, see Speed dialling a phone number

on page 36.

Voice dialling

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken word(s), such as a person’s name(s), can be a voice tag. You

can add up to ten voice tags.

Before using voice dialling, note that:

•

Voice tags are not language dependent. They are dependent on the speaker's voice.

Voice tags are sensitive to background noise. Record them and make calls in a quiet

environment.

•

When recording a voice tag or making a call by saying a voice tag, hold the phone in the

normal position near to your ear.

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: You must say the name exactly as you said it when you recorded it. This may

be difficult in, for example, a noisy environment or during an emergency, so you

should not rely solely upon voice dialling in all circumstances.

Adding and managing voice tags

Save or copy in the phone’s memory the contacts, to which you want to add a

voice tag. You can also add voice tags to the names in the SIM card, but if you

replace your SIM card with a new one, you first need to delete the old voice tags

before you can add new ones.

Voice tags use shared memory, see Shared memory on page 19.

1. In standby mode, press

2. Scroll to the contact to which you want to add a voice tag and press Details.

Scroll to the phone number you want and press Options.

3. Select Add voice tag.

4. Press Start, and say clearly the word(s) you want to record as a voice tag. After

recording, the phone plays the recorded tag.

When the voice tag has been successfully saved, Voice tag saved is displayed, a

beep sounds and a symbol

appears after the phone number with a voice

tag.

To check the voice tags, press Menu and select Contacts and Voice tags. Scroll to

the contact with the voice tag that you want, press Options and select to listen to,

delete or change the recorded voice tag.

Making a call by using a voice tag

If the phone has an application using the GPRS connection sending or receiving

data, first end the application to make a call by using voice dialling.

1. In standby mode, press and hold the volume down key, or press and hold

Contacts (or Go to). A short tone is heard and Speak now is displayed.

2. Say the voice tag clearly. The phone plays the recognised voice tag and then

dials the phone number of the voice tag after 1.5 seconds.

If you are using a compatible headset with the headset key, press and hold the

headset key to start the voice dialling.

Info numbers and service numbers

Your service provider may have included information numbers or service numbers

in your SIM card.

Press Menu and select Contacts and Info numbers or Service numbers. Scroll

through a category to an information number, or to a service number, and press

to call the number.

My numbers

The phone numbers assigned to your SIM card are saved in My numbers if this is

allowed by the card. To view the numbers press Menu and select Contacts and My

numbers. Scroll to the desired name or number, and press View.

Caller groups

You can arrange the names and phone numbers saved in Contacts into caller

groups. For each caller group, you can set the phone to sound a specific ringing

tone and show a selected graphic on the display when you receive a call from a

phone number in the group, see below. To set the phone to ring only upon calls

from phone numbers belonging to a selected caller group, see Alert for in Tone

settings on page 102.

Press Menu and select Contacts and Caller groups and select the desired caller

group. Select

•

Group name, key in a new name for the caller group and press OK.

Group ringing tone and select the ringing tone for the group. Default is the

ringing tone selected for the currently active profile.

•

Group logo and select On to set the phone to display the group logo, Off not to

display it, or View to view the logo.

Group members to add a name to the caller group. If there are no names in the

group, press Add, or otherwise, press Options and select Add contact. Scroll to

the name you want to add to the group and press Add.

To remove a name from a caller group, scroll to the name you want to remove,

and press Options and select Remove contact.

100

■ Settings (Menu 4)

Profiles

Your phone has various setting groups, profiles, for which you can customise the

phone tones for different events and environments. Initially, personalise the

profiles to your own liking and then you only need to activate a profile to use it.

Available profiles are General, Silent, Meeting, Outdoor, and Pager.

Press Menu, and select Settings and Profiles. Scroll to a profile and press Select.

• To activate the selected profile, select Activate.

• To set the profile to be active for a certain amount of time up to 24 hours,

select Timed and set the end time. When the time set for the profile expires,

the previous profile that was not timed, becomes active.

• To personalise the profile, select Personalise. Select the setting you want to

change and make the changes. The same settings can also be changed in the

Tone settings menu, see Tone settings on page 102.

To rename a profile, Profile name. The General profile cannot be renamed.

• To change your presence status information, select My presence. This menu is

available if you have set Synchronise with profiles to On, see My presence on

page 91. Select My availability to change your availability status and My

presence message to edit your status message.

101

Tip: To change the profile quickly in standby mode, press the power key

, scroll to the profile you want to activate and press Select.

Tone settings

Press Menu, and select Settings and then Tone settings. You can find the same

settings in the Profiles menu, see Profiles on page 101. Note that the settings you

make will change the settings in the active profile.

Select Incoming call alert to choose how the phone notifies you of an incoming

voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.

Select Ringing tone for incoming voice calls. To select ringing tones that have

been saved in the Gallery, select Open gallery from the ringing tone list.

Tip: If you receive a ringing tone via infrared connection or by

downloading, you can save the ringing tone in the Gallery.

Select Ringing volume and Vibrating alert for incoming voice calls and messages.

The vibrating alert does not work when the phone is connected to a charger, a

desktop stand, or a car kit.

Select Message alert tone to set the alert tone for the incoming messages, Keypad

tones, or Warning tones to set the phone to sound tones for, for example, when

the battery is running out of power.

Select Alert for to set the phone to ring only upon calls from phone numbers that

belong to a selected caller group. Scroll to the caller group you want or All calls

and press Mark.

102

Display settings

Press Menu, and select Settings and Display settings.

• Select Wallpaper to set your phone to display a background image, known as

wallpaper, when the phone is in standby mode. Some images are presaved in

the Gallery menu. You can also receive images, for example, via multimedia

messages, or transfer them with PC Suite from your PC and then save them in

Gallery. Your phone supports JPEG, GIF, WBMP, BMP and PNG formats but not

necessarily all variations of these file formats.

To select the wallpaper, select Select wallpaper and open an image folder.

Scroll to the image you want to set as wallpaper, press Options and select Set

as wallpaper.

To activate/deactivate the wallpaper, select On/Off, respectively.

Note that the wallpaper is not displayed when the phone activates the screen

saver.

• Select Colour schemes to change the colour in some display components, for

example indicators and signal and battery bars.

• Select Operator logo to set your phone to display or hide the operator logo. If

you have not saved the operator logo, the Operator logo menu is dimmed. The

operator logo is not displayed when the phone activates the screen saver.

For more information on availability of an operator logo, contact your network

operator or service provider. See also PC Suite on page 163.

103

• Select Screen saver timeout and the timeout after which the digital clock

display will be activated. The length of the timeout can vary from 5 seconds to

60 minutes.

The digital clock screen saver is used for power saving in standby mode. It is

activated when no function of the phone has been used for a certain time.

Press any key to deactivate the screen saver. The screen saver is also

deactivated when the phone is out of the network coverage area. The screen

saver overrides graphics and texts on the display in standby mode.

Note that if you have not set the time, 00:00 is displayed. To set the time, see

Time and date settings on page 104.

• Select Display brightness and scroll with and to decrease and increase

the brightness level of the phone display and press OK to accept it.

• Select Menu view to set the way the phone displays the main menu. Select List

for the menu list view and Grid for the menu grid view.

Time and date settings

Press Menu, and select Settings and Time and date settings.

• Select Clock and Show clock (or Hide clock) to show (or hide) the time on the

top right of the display in standby mode. Select Set the time to adjust the clock

to the correct time, and Time format to select the 12-hour or 24-hour time

format.

The clock serves the functions Messages, Call register, Alarm clock, timed

Profiles ,Calendar, Notes and screen saver, for example.

104

If the battery is removed from the phone for a long time or if the battery is flat,

you may need to set the time again.

• Select Date and Show date (or Hide date) and the date is shown (or hidden) on

the display when the phone is in standby mode. Select Set the date to adjust

the date. You can also select the date format and date separator.

• Select Auto-update of date & time (network service) and On to set the phone to

automatically update the time and date according to the current time zone,

select . To set the phone to ask for a confirmation before the update, select

Confirm first.

The automatic update of the date and time does not change the time that you

have set for the alarm clock, calendar or the alarm notes. They are in local time.

Updating may cause some alarms that you have set to expire.

For information on availability, contact your network operator or service

provider.

Personal shortcuts

You can add some specific functions to your personal shortcut list and activate

them either by pressing Go to or accessing the Go to menu. Refer to Go to (Menu

12) on page 162 and Standby mode on page 29.

You have also a list of phone functions which can be activated by saying a voice

tag. Up to five voice tags for the voice commands can be added.

105

Press Menu, and select Settings and Personal shortcuts. Select

•

Right selection key to select the name for the right selection key displayed in

standby mode. Select an operator-specific name, Go to or Contacts.

• To select the functions for your personal shortcut list, select Select Go to

options and the list of available functions is shown.

Scroll to a function and press Mark to add it to the shortcut list. To remove a

function from the list, press Unmark.

• To rearrange the functions on the list, select Organise Go to options and a

function. Press Move and select where you want to move the function.

•

Voice commands and select the command folder you want, scroll to the

command to which you want to add a voice tag. Press Options and select Add

command. If the command already has a voice tag, the indicator

is shown.

To add a voice command, refer to Adding and managing voice tags on page 98.

To activate a voice command, refer to Making a call by using a voice tag on

page 99.

During a call or when an application using the (E)GPRS connection is sending

or receiving data, you cannot activate or add a voice command.

Connectivity

Infrared

You can set up the phone to receive data through its infrared (IR) port. To use an IR

connection, the device with which you want to establish a connection must be

106

IrDA compliant. You can send or receive data such as business cards and calendar

notes to or from a compatible phone or data device (for example, a computer) via

the IR port of your phone.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR

devices. This device is a Class 1 Laser product.

Note: Your phone must be switched on to use this function. Do not switch the

phone on when wireless phone use is prohibited or when it may cause interference

or danger.

Sending and receiving data via IR

• Ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices. The

preferable distance between the two devices in an infrared connection is one

metre at most.

• To activate the IR port of your phone to receive data via IR, press Menu, and

select Settings, Connectivity and Infrared.

• The user of the sending phone selects the desired IR function to start data

transfer.

If data transfer is not started within two minutes after the activation of the IR

port, the connection is cancelled and has to be started again.

IR connection indicator

• When

is shown continuously, the IR connection is activated and your

phone is ready to send or receive data via its IR port.

107

• When

blinks, your phone is trying to connect to the other device or a

connection has been lost.

(E)GPRS

GPRS (General Packet Radio Service) is a network service that allows mobile

phones to be used for sending and receiving data over an Internet Protocol (IP) -

based network. GPRS is a data bearer that enables wireless access to data

networks such as the Internet.

EGPRS (Enhanced GPRS), also known as EDGE (Enhanced Data Rates for Global

Evolution) is similar to GPRS but the connection is faster. For more information on

availability of (E)GPRS and data transfer speed, contact your network operator or

service provider.

The applications that may use (E)GPRS are MMS, chat and SMS messaging (SMS,

Short Message Service), browsing sessions, e-mail, remote SyncML, Java

application downloading and the PC dial-up (for example, Internet and e-mail).

Before you can use (E)GPRS technology:

• Contact your network operator or service provider for availability and

subscription to the (E)GPRS service.

• Save the (E)GPRS settings for each of the applications used over (E)GPRS.

For information on pricing, contact your network operator or service provider.

Note that when you have selected GPRS as a data bearer, the phone uses EGPRS

instead of GPRS if this is available in the network. You cannot select between

EGPRS and GPRS but for some applications you may be able to select either GPRS

or GSM data (CSD, Circuit Switched Data).

108

(E)GPRS connection

Press Menu, and select Settings, Connectivity, GPRS and GPRS connection.

• Select Always online to set the phone to automatically register to a (E)GPRS

network when you switch the phone on. When the (E)GPRS service is available,

the indicator is shown on the top left of the display.

When you start an application using (E)GPRS, the connection between phone

and network is established, the indicator

is shown and data transfer is

possible. When you end the application, the (E)GPRS connection is ended but

the registration to the (E)GPRS network remains.

If you receive a call or a text message, or make a call during a (E)GPRS

connection, the indicator will be shown on the top right of the display to

indicate that the (E)GPRS connection is suspended (on hold).

Note that GPRS and EGPRS are not indicated separately, the indicators for

GPRS and EGPRS are the same.

• Select When needed and the (E)GPRS registration and connection are

established when an application using (E)GPRS needs it and closed when you

end the application.

Note that your phone supports three simultaneous (E)GPRS connections. For

example, you can at the same time browse xHTML pages, receive multimedia

messages and have an ongoing PC dial-up connection.

109

(E)GPRS modem settings

You can connect the phone via an infrared or a data cable connection to a

compatible PC and use the phone as a modem to enable (E)GPRS connectivity

from the PC.

To define the settings for (E)GPRS connections from your PC, press Menu, and

select Settings, Connectivity, GPRS and GPRS modem settings.

• Select Active access point and activate the access point you want to use.

• Select Edit active access point to change the access point settings.

• Select Alias for access point. Key in the name you would like for the

activated access point and press OK.

• Select GPRS access point. Key in the Access Point Name (APN) to establish a

connection to a (E)GPRS network and press OK. Contact your network

operator or service provider for the APN.

You can also set the (E)GPRS dial-up service settings (Access Point Name) on your

PC using the Nokia Modem Options software, see PC Suite on page 163. If you

have set the settings both on your PC and on your phone, note that the PC’s

settings will be used.

Call settings

Press Menu, and select Settings and Call settings.

• Select Call divert (network service). With call divert, you can direct your

incoming calls to another number, for example, to your voice mailbox number.

110

For details, contact your service provider. Divert options not supported by your

SIM card or your network operator may not be shown.

Select the divert option you want, for example, select Divert if busy to divert

voice calls when your number is busy or when you reject an incoming call.

To set the divert setting to on, select Activate and then select the timeout after

which the call is diverted, if this is available for the divert option. To set the

divert setting to off, select Cancel, or select Check status, if this is available for

the divert option, to check whether call divert is activated or not. Several divert

options may be active at the same time.

To see the divert indicators in standby mode, see Standby mode on page 29.

• Select Anykey answer and On and you can answer an incoming call by briefly

pressing any key, except , selection keys

and

, and

• Select Automatic redial and On and your phone will make a maximum of ten

attempts to connect the call after an unsuccessful call attempt.

• Select Speed dialling and On and the names and phone numbers assigned to

the speed-dialling keys, from

, can be dialled by pressing and

holding the corresponding number key.

• Select Call waiting and Activate and the network will notify you of an

incoming call while you have a call in progress (network service). See Call

waiting on page 37.

• Select Summary after call and On and the phone will briefly display the

duration and cost (network service) of the call after each call.

111

• Select Send my caller identity and Yes and your phone number will be displayed

to the person you are calling (network service). Select Set by network and the

setting agreed upon with your service provider is used.

• Select Line for outgoing calls which is a network service, to select the phone

line 1 or 2, that is, the subscriber number, for making calls. For example, you

can have a private and a business line. For more information on availability,

contact your network operator or service provider.

If you select Line 2 and have not subscribed to this network service, you will

not be able to make calls. However, calls on both lines can be answered

regardless of the selected line.

If supported by your SIM card, you can prevent the line selection by selecting

the option Lock.

Tip: In standby mode, you can switch from one line to the other by

pressing and holding

Phone settings

Press Menu, and select Settings and Phone settings.

• Select Phone language and select the language for the display texts. If

Automatic is selected, the phone selects the language according to the

information on the SIM card.

• Select Memory status and scroll to view the free memory, the total used

memory and the used memory for each function in the list.

112

You may also find the memory information in the menu of some of those

functions, for example, in gallery folder view.

• Select Automatic keyguard to set the keypad of your phone to lock

automatically after a pre-set time delay when the phone is in standby mode

and no function of the phone has been used. Select On and you can set the

time from 10 seconds to 60 minutes.

Refer also to Keypad lock (Keyguard) on page 33.

• Select Security keyguard and select On to set the phone to ask for the security

code when you unlock the keyguard.

Refer also to Keypad lock (Keyguard) on page 33.

Note: When Keyguard is on, calls may be possible to the emergency number

programmed into your phone (e.g. 112, 911 or other official emergency

number). Key in the emergency number and press

displayed only after you have keyed in its last digit.

. The number is

• Select Cell info display and On to set the phone to indicate when it is used in a

cellular network based on Micro Cellular Network (MCN) technology.

• Select Welcome note and key in the note you would like to be shown briefly

when the phone is switched on. To save the note, press Options, and select

Save.

• Select Network selection and Automatic and the phone automatically selects

one of the cellular networks available in your area.

If you select Manual, you can select a network that has a roaming agreement

with your home network operator. If No network access is displayed, you must

113

select another network. The phone stays in manual mode until the automatic

mode is selected or another SIM card is inserted into the phone.

• Select Confirm SIM service actions. See SIM services (Menu 13) on page 162.

• Select Help text activation to set the phone to show or not to show the help

texts. See also Using the menu on page 43.

• Select Start-up tone to set the phone to play or not to play a start-up tone

when the phone is switched on.

Chat and Presence settings

For the settings required for chat and presence, contact your network operator or

service provider. To receive the chat and presence settings over the air, see Over

the air settings service on page 34.

Keying in the settings manually

1. Press Menu, and select Settings, Chat and my presence settings and Active

chat and presence settings.

2. Scroll to the set you would like to activate and press Activate.

You need to activate the connection set where you want to save the settings. A

connection set is a collection of settings required to make a connection to the

chat and presence services.

3. Select Edit active chat and presence settings.

Select each of the settings one by one and key in all the required settings

according to the information you have received from your network operator or

114

service provider. Note that the connection settings are in the Connection

settings menu.

Enhancement settings

The enhancement settings menu is shown only if the phone is or has been

connected to a compatible mobile enhancement, chargers and handsfree units,

for example.

Press Menu, and select Settings and Enhancement settings. You can select an

enhancement menu if the corresponding enhancement is or has been connected

to the phone. Depending on the enhancement, you can select some of the

following options:

•

Default profile to select the profile that you want to be automatically

activated when you connect to the selected enhancement. You can select

another profile while the enhancement is connected.

Automatic answer to set the phone to answer an incoming call automatically

after five seconds. If the Incoming call alert is set to Beep once or Off,

automatic answer will not be in use.

Lights to set the lights permanently On. Select Automatic to set the lights on

for 15 seconds after a keypress.

• When the phone is connected to the full car kit, select Ignition detector and On

to automatically switch off the phone approximately 20 seconds after you

have switched off the car’s ignition.

115

• For Text phone , select Use text phone and select Yes to use the text phone

settings instead of headset or loopset settings.

If your text phone supports baudot and CTM sending, select baudot. Always

use the original cables supplied with the text phone.

Security settings

Note: When security features that restrict calls are in use (call barring, closed user

group and fixed dialling), calls may be possible to certain emergency numbers in

some networks (e.g. 112, 911 or other official emergency numbers).

Press Menu, and select Settings and Security settings. Select

•

PIN code request to set the phone to ask for your PIN code every time the

phone is switched on. Some SIM cards do not allow the PIN code request to be

turned off.

•

Call barring service (network service) to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

Fixed dialling to restrict your outgoing calls and text messages to selected

phone numbers if this function is supported by your SIM card. The PIN2 code is

required.

When the fixed dialling is on, (E)GPRS connections are not possible except

while sending text messages over a (E)GPRS connection. In this case, the

recipient’s phone number and the message centre number have to be included

on the fixed dialling list.

116

•

Closed user group. Closed user group is a network service that specifies the

group of people whom you can call and who can call you. For more information

contact your network operator or service provider.

Security level. Select Phone and the phone will ask for the security code

whenever a new SIM card is inserted into the phone.

Select Memory and the phone will ask for the security code when the SIM

card’s memory is selected and you want to change the memory in use (see

Selecting settings for contacts on page 86) or copy from one memory to

another (Copying contacts on page 95).

•

Access codes to change the security code, PIN code, PIN2 code or barring

password. Codes can only include numbers from 0 to 9.

Restore factory settings

To reset some of the menu settings to their original values, press Menu, and select

Settings and Restore factory settings. Key in the security code and press OK. Note

that the data you have keyed in or downloaded, for example, the names and phone

numbers saved in contacts are not deleted.

■ Gallery (Menu 5)

Note: Your phone must be switched on to use this function. Do

not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

117

You can save images and ringing tones, for example, that have been received in

multimedia messages in the folders of the gallery, see Reading and replying to a

multimedia message on page 60.

Your phone supports usage rights system to protect acquired content. A piece of

content, for example ringing tone, can be protected and associated with certain

usage rules, for example number of usage times and a certain usage period. The

rules are defined in the content’s usage rights which can be delivered either

together with the content or independently depending on the service provider.

You may be able to update these rights. Always check the delivery terms of any

content and usage rights before acquiring them, as they may be subject to a fee.

The gallery uses shared memory, see Shared memory on page 19.

1. Press Menu and select Gallery. The list of options is shown.

2. Select View folders to open the list of folders.

Other available options are:

•

Add folder to add a new folder. Key in a name for the folder and press OK.

Delete folder to select the folder you want to delete. You cannot delete the

original folders on the phone.

•

Rename folder to select the folder you want to rename. You cannot rename

the original folders on the phone.

Usage rights list to view the list of all available usage rights. You can delete

the rights, for example delete expired rights.

Gallery downloads to download more images and tones. Select Graphic

downloads or Tone downloads. The list of available browser bookmarks is

118

shown. Select More bookmarks to access the list of bookmarks in the

Services menu, see Bookmarks on page 155.

Select the appropriate bookmark to connect to the desired page. If the

connection fails, you may not be able to access the page from the service

whose connection settings are currently active. In this case, enter the

Services menu and activate another set of service settings, see Making a

connection to a service on page 152. Try again to connect to the page.

For the availability of different services, pricing and tariffs, contact your

network operator and/or service provider. Download content only from the

sources you trust.

3. Open the folder you want and the list of files in the folder is shown. Images,

Video clips, Graphics, Tones and Recordings are the original folders in the

phone.

Press Optionsand select the option you want from the list. Refer to Options for

the files in the gallery on page 119.

4. Open the file you want.

Press Optionsand select the option you want from the list. Refer to Options for

the files in the gallery on page 119.

Options for the files in the gallery

Some of these options are available for the files in the gallery.

•

Open to open the selected file.

Delete to delete the selected file.

119

•

Send (or press

) to send the selected file, for example, via MMS.

Move to move a file to another folder.

Rename to give a new name to the file.

Set as wallpaper to set the selected image file as wallpaper.

Set as ring tone to set the selected sound file as the ringing tone.

Details to see the details of the file, for example the date of the file.

Sort to sort the files and folders by date, type, name or size.

Delete all to delete all the files in the selected folder.

View in sequence to view the files in the folder sequentially.

Play to listen to or to view sound, video or animated files.

Zoom to increase the size of an image .

Mute audio (Unmute audio) to mute (unmute) the video file.

Set contrast to adjust the contrast level of the image, video or animated files.

Edit image to edit the selected image file.

Update rights to update the usage rights of the selected file. This option is only

shown if the rights updating is supported by the file.

Note that copyright protections may prevent some images, ringing tones and

other content from being copied, modified, transferred or forwarded.

120

■ Media (Menu 6)

Note: Your phone must be switched on to use the functions in

the Media menu. Do not switch the phone on when wireless phone use is

prohibited or when it may cause interference or danger.

Camera

Note: Obey all local laws governing the taking of pictures. Do not use this feature

illegally.

You can take photos or record video clips with the phone’s built-in camera. The

camera lens is on the back of the phone, and the display of the phone works as a

viewfinder. The camera produces pictures in JPEG format and the video clips in

H.263 (SubQCIF) format.

If there is not enough memory to take a new photo, you need to free some by

deleting old photos or other files in the gallery. Note that the camera uses shared

memory, see Shared memory on page 19.

To take a photo

1. Press Menu, and select Media, Camera and Standard photo, Portrait photo or

if the lighting is dim for taking photos, select Night mode. If you want to add

the photo to a name or phone number saved in contacts, select Portrait photo.

Tip: To quickly open the camera viewfinder with standard photo view,

press

in standby mode. To quickly change the camera mode, for

example video, press and hold or

121

2. The live image appears on the display, and you can use the display as a

viewfinder.

3. To take a photo, press Capture. When taking a photo, a shutter sound is heard.

The phone saves the photo in the Images folder of the Gallery menu. The saved

photo will be shown on the display.

To define the default title for the photo, see Default title in Camera settings on

page 123.

4. Select Back to take another photo, or press Options and select, for example, an

option to delete or rename the saved photo, send it as a multimedia message,

or attach the photo to a name or phone number in contacts, or access the

gallery.

Tip: You can activate the self-timer of the camera for one picture at a time.

Press Menu, and select Media, Camera, Self-timer and Standard photo,

Portrait photo or Night mode. Press Start, and after the timeout, the

camera takes the photo and saves it in the Gallery menu. While the self-

timer is running, a beeping sound is heard.

Recording a video clip

1. Press Menu, and select Media, Camera and Video.

2. To start recording a video clip, press Record. When you are recording a video

clip, the

indicator and the remaining recording time are shown on the top

of the display.

To pause the recording, press Pause and to resume the recording, press

Continue.

122

3. To stop the recording, press Stop. The phone saves the recording in the Video

clips folder of the Gallery menu. Press Options and select, for example, an

option to delete or rename the saved video clip, send it as a multimedia

message, or access the gallery.

Camera settings

Press Menu, and select Media, Camera and Settings. Select

•

Image quality to define how much the photo file will be compressed when

saving the image. Select High, Normal or Basic. High provides the best image

quality but takes more memory.

•

Video clip length to select the length of the video clips that you record. The

maximum length of a video clip is 94 kB that is approximately 10 to 15 seconds

in duration, depending on conditions.

•

Camera sounds to set the shutter sound and the self-timer tone to On or Off.

Default title to define the title that will be used when saving a photo. If you

select Automatic, the default title will be used, or if you select My title, you can

key in or edit a new title.

Radio

To listen to the radio on your phone connect the compatible headset to the

headset connector on the bottom of the phone. The lead of the headset functions

as the radio antenna, so let it hang freely.

Note that the quality of the radio broadcast depends on the radio station’s

coverage in that particular area.

123

1. To turn on the radio, press Menu and select Media and Radio. On the display

are

• Channel location number and the name of the radio channel if you have

saved the channel.

• Frequency of the radio channel.

2. If you have already saved radio channels, you can scroll to the channel you

would like to listen to, or select a radio channel location 1 to 9 by pressing the

corresponding number key.

When using the compatible headset supplied with the headset key, press the

key to scroll to the desired saved radio channel.

3. When the radio is on, press Options and select Switch off to turn off the radio.

Tip: To quickly turn off the radio, press and hold

Tuning a radio channel

When the radio is on, press and hold

to start the channel search.

Searching stops when a channel is found. To save the channel, press Options, and

select Save channel. Key in the name of the channel and press OK. Select the

location where you want to save the channel.

Tip: To quickly save the channel in a location 1 to 9, press and hold the

corresponding number key, then key in the name of the channel and press

OK.

124

Using the radio

When the radio is on, press Options and select

•

Switch off to turn off the radio.

Save channel to save the radio channel you have found, refer to Tuning a radio

channel above. Up to 20 radio channels can be saved.

•

Automatic tuning. Briefly press

upwards or downwards. The search stops when a channel has been found,

press OK. To save the channel, see Save channel above.

to start the channel search

Manual tuning. Briefly press

to move the channel search 0.1

MHz upwards or downwards or press and hold down the keys to quickly search

upwards or downwards for a channel. To save the channel, press OK and see

Save channel above.

Tip: To quickly select Manual tuning, press

when in the Radio

menu.

•

Set frequency. If you know the frequency of the radio channel you would like

to listen to (between 87.5 MHz and 108.0 MHz), key it in and press OK. To save

the channel, see Save channel above.

Tip: To quickly select Set frequency, press

when in the Radio

menu.

•

Delete channel. To delete a saved channel, scroll to it, press Delete, and OK.

Rename. Key in a new name for the saved channel and press OK.

125

•

Loudspeaker (or Headset) to listen to the radio using the loudspeaker (or

headset). Keep the headset connected to the phone. The lead of the headset

functions as the radio antenna.

Mono output (or Stereo output) to listen to the radio in mono (or in stereo).

You can normally make a call or answer an incoming call while listening to the

radio. The volume of the radio is muted. When you end the call, the radio volume

will automatically be turned up again.

When an application using a (E)GPRS or HSCSD connection is sending or receiving

data, it may interfere with the radio.

Voice recorder

You can record pieces of speech, sound or an active call for a minute. For example,

this is useful when recording a name and phone number for writing them down

later.

Note: Obey all local laws governing recording of calls. Do not use this feature

illegally.

Recording

1. Press Menu, select Media and Voice recorder.

2. To start the recording, select Record. To start the recording during a call, press

Options, and select Record. While recording a call, all parties to the call will

hear a faint beeping sound approximately every five seconds.

When recording a call, hold the phone in the normal position near to your ear.

126

3. To end the recording, press Stop. The recording will be saved in the Recordings

folder of the Gallery menu.

4. To listen to the latest recording, select Replay last.

To send the recording as a multimedia message, select Send.

List of recordings

Press Menu, and select Media, Voice recorder and Recordings list. The list of

folders in the Gallery is shown. Open Recordings, press Options and you can select

some of the options for files in the Gallery. See Gallery (Menu 5), step 4 on page

117.

■ Organiser (Menu 7)

Note: Your phone must be switched on to use the functions in

the Organiser menu. Do not switch the phone on when wireless phone use is

prohibited or when it may cause interference or danger.

Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even

when the phone is switched off if there is enough power in the battery.

Press Menu, and select Organiser and Alarm clock.

• Select Alarm time, key in the alarm time and press OK.

To change the alarm time, select On.

127

• Select Alarm tone and select the default alarm tone, personalise the alarm

tone by selecting one from the ringing tone list or from Gallery, or set a radio

channel as the alarm tone.

If you select the radio as an alarm tone, connect the headset to the phone. The

phone uses the latest listened-to channel as an alarm tone via the loudspeaker.

If the headset is removed, the default alarm tone will be used instead of the

radio.

When the alarm time expires

The phone will sound an alert tone, and flash Alarm! and the current time on the

display.

Press Stop to stop the alarm. If you let the phone continue to sound the alarm for

a minute or press Snooze, the alarm stops for about ten minutes and then

resumes.

If the alarm time is reached while the phone is switched off, the phone switches itself on and

starts sounding the alarm tone. If you press Stop, the phone asks whether you want to

activate the phone for calls, Switch the phone on?. Press No to switch off the phone or Yes to

make and receive calls.

Note: Do not press Yes when wireless phone use is prohibited or when it may cause

interference or danger.

Calendar

The calendar helps you to keep track of reminders, calls that you need to make,

meetings, and birthdays.

The calendar uses shared memory, see Shared memory on page 19.

128

Press Menu, and select Organiser and Calendar.

Tip: To quickly open the Calendar menu, press in standby mode.

Scroll to the day you want. The current day is indicated by a frame around

the day. If there are any notes set for the day, the day is in bold type. To view the

day notes, press Options and select Day notes. To view a week, select Week view.

• To view a single note, scroll to the note you want to view, press Options and

select View. The note view allows you to view the details of the selected note.

You can scroll through the note.

• For example, there are also options for making a note, or for sending a note via

IR, or as a note directly to another compatible phone’s calendar or as a text

message.

There are options for deleting, editing, moving and repeating a note and for

copying a note to another day.

Settings to set the date, time, date or time format, or the first day of the week.

In the Auto-delete option you can set the phone to delete old notes

automatically after a specified time. However, the repeat notes, for example,

birthday notes, will not be deleted.

Making a calendar note

For keying in letters and numbers, see Writing text on page 39.

Press Menu, and select Organiser and Calendar. Scroll to the date you want, press

Options and select Make a note. Select one of the following note types:

•

Meeting - Key in the note (or press Options and search for the name in

contacts). Press Options and select Save. Key in the location for the meeting

129

and press Options and select Save. Key in the start time for the meeting and

press OK, and then the end time and press OK. To set the alarm for the note,

select With tone or Silent (no alarm tone) and then set the alarm time.

•

Call - Key in the phone number, press Options and select Save. Key in the

name, press Options and select Save. (Instead of keying in the phone number,

press Options to search for the name and number in contacts.) Then key in the

time for the call and press OK. To set the alarm for the note, select With tone or

Silent (no alarm tone) and then set the alarm time.

Birthday - Key in the person’s name (or press Options and search for it in

contacts), press Options and select Save. Then key in the year of birth, and

press OK. To set the alarm for the note, select With tone or Silent (no alarm

tone) and then set the alarm time.

•

Memo - Key in the note, press Options and select Save. Key in the end day

for the note and press OK. To set the alarm for the note, select With tone or

Silent (no alarm tone) and then set the alarm time.

Reminder - Key in the subject for the reminder, press Options and select

Save. To set the alarm for the note, select Alarm on and then set the alarm

time.

When you have set the alarm, the indicator

notes.

is displayed when you view the

When the phone sounds an alarm for a note

The phone beeps, and displays the note. With a call note

on the display, you

can call the displayed number by pressing

130

• To stop the alarm without viewing the note, press Exit.

• To stop the alarm and to view the note, press View. Press Snooze and the

phone returns to standby mode after ten minutes.

To-do list

You can save a note for a task that you have to do, select a priority level for the

note and mark it as done when you have completed it. You can sort the notes by

priority or by date.

The to-do list uses shared memory, see Shared memory on page 19.

Press Menu, and select Organiser and To-do list and the list of notes is shown.

Press Options, or scroll to the desired note and press Options.

• To add a new note, select Add. Key in the subject for the note. When you have

keyed in the maximum number of characters for a note, no further characters

are accepted. Press Options and select Save. Select the priority for the note,

High, Medium, or Low. The phone automatically sets the deadline without an

alarm for the note. To change the deadline, view the note and select the option

for deadline.

Dictionary, refer to Setting predictive text input on or off on page 39.

• For example, you can also view and delete the selected note and delete all the

notes that you have marked as done. You can sort the notes by priority or by

deadline, send a note to another phone, save a note as a calendar note, or

access the calendar.

131

While viewing a note, you can also, for example, select an option to edit the

selected note, edit the deadline or priority for the note, or mark the note as

done.

Notes

You can use the Notes application for writing and sending notes to compatible

devices via IR, SMS or MMS.

The Notes application uses shared memory, see Shared memory on page 19.

1. To access Notes, press Menu and select Organiser and Notes. The phone will

ask you to set the date and time, if they have not already been set when you

start to write a note.

2. Press Options and select Make a note, see Writing text on page 39.

3. Key in the note and select Save.

You can insert the current time and date to the note. If there is not enough

space to insert them to the note, the phone will ask you to delete the

appropriate number of characters from your note.

You can also send the note to a compatible device via IR, MMS, or as a text

message (SMS). If the note is too long to be sent as a text message, the phone

will ask you to delete the appropriate number of characters from your note.

The other options for notes include options for viewing, deleting, and editing a

note. While editing a note, you can also exit the text editor without saving the

changes.

132

■ Games (Menu 8)

Note: Your phone must be switched on to use this function. Do

not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

Launching a game

1. Press Menu, and select Games and Select game.

2. Scroll to a game or a game set (the name depends on the game).

3. Press Options and select Open or press

. If the selection is a single game

it will be launched.

Otherwise, a list of games in the selected game set is displayed. To launch a

single game, scroll to the desired game and press Options and select Open, or

press

Note that running some games may consume the phone’s battery faster (and you

may need to connect the phone to the charger).

Other options available for a game or game set

Options for games, see Other options available for an application or application

set on page 136 .

133

Game downloads

Press Menu, and select Games and Game downloads. The list of available

bookmarks is shown. Select More bookmarks to access the list of bookmarks in the

Services menu, see Bookmarks on page 155.

Select the appropriate bookmark to connect to the desired page. If the connection

fails, you may not be able to access the page from the service whose connection

settings are currently active. In this case, enter the Services menu and activate

another set of service settings, see Making a connection to a service on page 152.

Try again to connect to the page.

For the availability of different services, pricing and tariffs, contact your network

operator and/or service provider.

To download more games, refer also to Downloading an application on page 136.

Note that when downloading a game, it may be saved in the Applications menu

instead of the Games menu.

Memory status for games

To view the amount of memory available for game and application installations,

press Menu, and select Games and Memory. See also Memory status for

applications on page 138.

The games use shared memory, see Shared memory on page 19.

134

Game settings

Press Menu, and select Games and Settings to set sounds, lights and shakes for

the game.

■ Applications (Menu 9)

Note: The phone must be switched on to use this function. Do

not switch on the phone when the use of a wireless phone is prohibited or when it

may cause interference or danger.

Launching an application

1. Press Menu, and select Applications and Select application.

2. Scroll to an application or an application set (the name depends on the

application).

3. Press Options and select Open or press

. If the selection is a single

application it will be launched.

Otherwise, a list of applications in the selected application set is displayed. To

launch a single application, scroll to the desired application and press Options

and select Open, or press

Note that running some applications may consume the phone’s battery faster

(and you may need to connect the phone to the charger).

135

Other options available for an application or application set

•

Delete to delete the application or application set from the phone.

Note that if you delete a pre-installed application or an application set from

your phone, you may download it again to your phone from the Nokia Software

Market, www.softwaremarket.nokia.com/.

•

Web access to restrict the application from accessing the network. Select Ask

first and the phone asks for net access, Allowed to allow the net access, or Not

allowed not to allow the net access.

•

Update version to check if a new version of the application is available for

download from the services (network service).

Web page to provide further information or additional data for the application

from an Internet page. This feature needs to be supported by the network. It is

only shown if an Internet address has been provided with the application.

•

Connect via for some applications that need specific service settings. Your

phone is set to use as default the service settings for the browser.

Details to give additional information about the application.

Downloading an application

Your phone supports J2ME^TMJava applications. Make sure that the application is

compatible with your phone before downloading it. You can download new Java

applications in different ways:

136

• Press Menu, and select Applications and App. downloads and the list of

available bookmarks is shown. Select More bookmarks to access the list of

bookmarks in the Services menu, see Bookmarks on page 155.

Select the appropriate bookmark to connect to the desired page. If the

connection fails, you may not be able to access the page from the service

whose connection settings are currently active. In this case, enter the Services

menu and activate another set of service settings, see Making a connection to

a service on page 152. Try again to connect to the page.

For the availability of different services, pricing and tariffs, contact your

network operator and/or the service provider.

• Press Menu, and select Services and Downloads. Select to download an

appropriate application or game. See Downloading on page 156.

• Use the game download functionality, see Game downloads on page 134.

• Use the Nokia Application installer from PC Suite to download the applications

in your phone.

Note that Nokia does not warrant for applications from non-Nokia sites. If you

choose to download Java applications from them, you should take the same

precautions, for security or content, as you would with any site.

Note that when downloading an application, it may be saved in the Games menu

instead of the Applications menu.

137

Memory status for applications

To view the amount of memory available for game and application installations,

press Menu, and select Applications and Memory.

The applications use shared memory, see Shared memory on page 19.

■ Extras (Menu 10)

Note: Your phone must be switched on to use the functions in

the Extras menu. Do not switch the phone on when wireless phone use is

prohibited or when it may cause interference or danger.

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

This calculator has a limited accuracy and rounding errors may occur, especially in long

divisions.

1. Press Menu, and select Extras and Calculator.

2. When ’0’ is displayed on the screen, key in the first number in the calculation,

press

for a decimal point.

3. Press Optionsand select Add, Subtract, Multiply, Divide, Square, Square root or

Change sign.

Tip:Alternatively, press

once to add, twice to subtract, three times

to multiply or four times to divide.

138

4. Key in the second number.

5. For a total, press Options and select Equals. Repeat steps 3 to 5 as many times

as is necessary.

6. To start a new calculation, first press and hold Clear.

Performing a currency conversion

1. Press Menu, and select Extras and Calculator.

2. To save the exchange rate, press Options and select Exchange rate. Select

either of the displayed options. Key in the exchange rate, press

for a

decimal point, and press OK. The exchange rate remains in the memory until

you replace it with another one.

3. To perform the currency conversion, key in the amount to be converted, press

Options and select In domestic or In foreign.

Tip: You can also perform the currency conversion in standby mode. Key in

the amount to be converted, press Options and select In domestic or In

foreign.

Countdown timer

Press Menu, and select Extras and Countdown timer. Key in the alarm time in

hours and minutes and press OK. If you wish, write your own note text which is

displayed when the time expires, and press OK to start the countdown timer.

• To change the countdown time, select Change time, or to stop the timer, select

Stop timer.

139

If the alarm time is reached when the phone is in standby mode, the phone sounds

a tone and flashes the note text if it is set or else Countdown time up. Stop the

alarm by pressing any key. If no key is pressed, the alarm automatically stops

within 30 seconds. To stop the alarm and to delete the note text, press OK.

Stopwatch

You can measure time, take intermediate times or lap times using the stopwatch.

During timing, the other functions of the phone can be used. To set the stopwatch

timing in the background, press

Using the stopwatch consumes the battery and the phone's operating time will be reduced.

Be careful not to let it run in the background when performing other operations with your

phone.

Time observation and time splitting

1. Press Menu, and select Extras, Stopwatch and Split timing. You can select

Continue if you have set the timing in the background.

2. Press Start to start the time observation. Press Split every time you want to

take an intermediate time. The intermediate times are listed below the running

time on the display. Scroll to view the times.

3. Press Stop to stop the time observation.

4. Press Options and select

Start to start the time observation again. The new time is added to the previous

time.

140

Save to save the time. Key in a name for the measured time and press OK. If no

name is keyed in, the total time is used as the title.

Reset to reset the time without saving it.

Lap times

Press Menu, and select Extras, Stopwatch and Lap timing. Press Start to start the

time observation and Lap to take a lap time. Press Stop to stop the lap timing.

Press Options and you can save or reset the lap times. Refer to Time observation

and time splitting on page 140.

Viewing and deleting times

Press Menu, and select Extras and Stopwatch.

If the stopwatch is not reset, you can select Show last to view the most recent

measured time. Select View times and a list of names or final times of the time

sets is shown, select the time set you want to view.

To delete the saved times, select Delete times. Select Delete all and press OK, or

select One by one, scroll to the times you want to delete, press Delete and press

OK.

Wallet

In Wallet you can save personal information, for example, credit card numbers

and addresses. The data that are saved in the wallet can easily be retrieved while

browsing to automatically fill in data fields, for example, when making purchases.

You can also save access codes to mobile services that request a user name and

password.

141

The data in the wallet is protected with a wallet code that you can define when

you access wallet for the first time. At Create wallet code: key in the code and

press OK to confirm it and at Verify wallet code: key in the code again and press

OK. See also Wallet code (4 to 10 digits) on page 17.

If you want to delete all the content of the wallet and the wallet code, key in

*#7370925538# (*#res wallet# in letters) in standby mode. You also need the

phone’s security code, see Access codes on page 16.

To add the content into the wallet menu, and to edit it, access the wallet menu. To

use the content of the wallet in a mobile service, access the wallet via the

browser, see Services (Menu 11) on page 149.

Accessing the wallet menu

To access the wallet menu, press Menu, select Extras and Wallet. Key in your

wallet code and press OK, see Wallet settings on page 145. Select

•

Wallet profiles to create card combinations, for example, for different services.

A wallet profile is helpful if the service asks for many data items to be filled in.

You can select the appropriate wallet profile instead of selecting different

cards separately.

Cards to save personal card information. You can save payment card, loyalty

card, and access card information, for example username and password

combinations for different services, and also addresses and user data. See

Saving card details on page 143.

Tickets to save the notifications of e-tickets that you have bought via a mobile

service. To view the tickets, press Options and select View.

142

•

Receipts to save receipts of mobile purchases.

Personal notes to save all kinds of personal information that you want to keep

protected by the wallet PIN code. See Personal notes on page 144.

•

Settings, see Wallet settings on page 145.

Saving card details

1. Access the wallet and select Cards.

2. Select the card type to save details:

•

Payment card for credit and debit cards.

Loyalty card for membership cards.

Access card for personal usernames and passwords to online services.

Address card for contact information, for example, for delivery and billing

addresses.

•

User info card for customised personal preferences for online services.

3. Press Options and select Add new.

4. Fill in the fields for the details and press Done.

If supported by your service provider, you can also receive card information to

your phone over the air. You will be notified as to which category the card belongs

to. Save or discard the received card. You can view and rename the saved card but

not edit it. For availability of receiving card information over the air, contact the

card issuer or service provider.

143

Personal notes

You can save personal notes, for example, account numbers, passwords, codes or

notations.

Access the wallet and select Personal notes. Press Options and you can view, add,

edit a selected note and sort notes either by name or date or delete notes. When

viewing a note, you can edit or delete the selected note. The option Send via text

msg. is for copying the note as a text message and Copy to calendar is for copying

the note to the calendar as a memo. Use detail is for extracting numbers, e-mail

addresses and web addresses from a note.

Creating a wallet profile

When you have saved your personal card details, you can combine them together

into a wallet profile. You can use the profile to retrieve wallet data from different

cards while browsing.

1. Access the wallet and select Wallet profiles.

2. Press Options and select Add new. A new wallet profile opens.

3. Fill in the following fields and press Done. Some of the fields contain data that

are selected from the wallet. You need to save those data before you can

create a wallet profile.

•

Wallet profile name: enter a name for the profile.

Select payment card next - select a card from the payment card list.

Select loyalty card next - select a card from the loyalty card list.

Select access card next - select a card from the access card list.

144

•

Select user info card next - select a card from the user data card list.

Select billing address next - select an address from the address card list.

Select shipping address next - select an address from the address card list.

Select receipt delivery address next - select an address from the address

card list.

•

Select receipt delivery method next - select the way to deliver the receipt,

Receipt to phone number or Receipt to e-mail address.

Wallet settings

Access the wallet and select Settings. Select

•

Change code to change the wallet code.

Phone ID to set the RFID code.

Guidelines for paying for your purchases with the wallet

• To do your shopping, access the desired service site that supports the wallet.

The service needs to support the Electronic Commerce Modeling Language

specification. See Making a connection to a service on page 152.

Choose the product you want to buy and read carefully all provided

information before your purchase.

Note: The text may not fit within a single screen. Therefore, make sure

to scroll through and read all of the text before your purchase.

• To pay for the items you wish to buy, the phone asks whether you want to use

wallet or not. The phone also asks for your wallet PIN code.

145

• Select the card you want to pay with from the Payment cards list. Provided

that the data form you receive from the service provider supports the

Electronic Commerce Modeling Language specification, the phone

automatically fills in the credit card information or the wallet profile from the

wallet.

• Approve the purchase, and the information is forwarded.

• You may receive an acknowledgement or a digital receipt of the purchase.

• To close the wallet, select Close wallet. If you do not use the wallet for 5

minutes, it will be automatically closed.

Note: If you have tried to access or have accessed confidential information

requiring passwords (for example your bank account), empty the cache of your

phone after each use.

To empty the cache, see The cache memory on page 158.

Synchronisation

Synchronisation allows you to save your calendar and contacts data in a remote

Internet server or in a compatible PC. If you have saved data in the remote

Internet server, you can synchronise your phone by starting the synchronisation

from your phone. Synchronising to the remote server is a network service. You can

also synchronise the data in your phone’s contacts and calendar to correspond

with the data of your compatible PC by starting the synchronisation from your PC.

The contact data in your SIM card will not be synchronised.

146

Note that answering an incoming call during synchronisation will end the

synchronisation and you will need to re-start it.

Synchronising from your phone

Before synchronising from your phone, you may need to do the following:

• Subscribe to a synchronisation service. For more information on availability

and the synchronisation service settings, contact your network operator or

service provider.

• Retrieve the synchronisation settings from your network operator or service

provider, see Settings for the synchronisation on page 148.

• Set the connection settings you need for the synchronisation. See Setting up

the phone for a service on page 151.

To start the synchronisation from your phone:

1. Activate the connection settings you need for the synchronisation. See Setting

up the phone for a service on page 151.

2. Press Menu, select Extras, Synchronisation, Settings and Active Internet sync.

settings. Scroll to the set you wish to activate and press Activate. Mark the

data to be synchronised. See Data to be synchronised in Settings for the

synchronisation on page 148.

3. Press Menu, and select Extras, Synchronisation and Synchronise.

4. The marked data of the active set will be synchronised after confirmation.

147

Note that synchronising for the first time or after an interrupted

synchronisation may take up to 30 minutes to complete, if the contacts or

calendar are full.

Settings for the synchronisation

You may receive the synchronisation settings as an over the air message from the

network operator or service provider. To receive the settings over the air, see Over

the air settings service on page 34.

Keying in the settings manually

1. Press Menu, select Extras, Synchronisation and Settings.

2. Select Active Internet sync. settings.

3. Scroll to the set you wish to activate and press Activate.

You need to activate the set where you want to save the synchronisation

settings. A set is a collection of settings required to make a connection to a

service.

4. Select Edit active Internet sync. settings. Select each setting one by one and

key in all the required settings.

•

Settings’ name. Key in the name for the set and press OK.

Data to be synchronised. Mark the data you want to synchronise, Contacts

and/or Calendar, and press Done.

•

Database addresses. Select Contacts database and/or Calendar database to

be edited. Key in the name of the database and press OK.

User name. Key in the user name and press OK.

148

•

Password. Key in the password and press OK.

Synchronisation server. Key in the name of the server and press OK.

Connection settings to define connection settings required for

synchronisation. See Keying in the service settings manually on page 151.

Select each of the settings one by one and key in all the required settings.

Contact your network operator or service provider for the settings.

Select PC sync. settings to key in the settings for server alerted

synchronisation. Select

•

User name. Key in the user name and press OK.

Password. Key in the password and press OK.

Synchronising from your PC

To synchronise contacts and calendar from your PC, use either an IR connection or

a data cable. You also need the PC Suite software of your phone installed on your

PC. Start the synchronisation from your PC using PC suite.

■ Services (Menu 11)

Note: Your phone must be switched on to use this function. Do

not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

149

You can access various services with your phone’s multi-mode browser. For

example, these services may include weather reports, news or flight times and

financial information.

Check the availability of these services, pricing and tariffs with your network

operator and/or the service provider whose service you wish to use. Service

providers will also give you instructions on how to use their services.

With your phone’s multi-mode browser you can view the services that use

Wireless Mark-Up Language (WML) or extensible HyperText Mark-up Language

(xHTML) on their pages. Since the phone’s display and the memory capacity are

much smaller than in a computer, Internet content is displayed differently on the

phone’s display. Note that you may not be able to view all details of the Internet

pages.

Basic steps for accessing and using services

1. Save the service settings that are required to access the service that you want

to use. See page 151.

2. Make a connection to the given service. See page 152.

3. Start browsing the pages of the service. See page 152.

4. Once you are finished browsing, end the connection to the service. See page

154.

150

Setting up the phone for a service

You may receive the service settings as an over the air message from the network

operator or service provider that offers the service that you want to use. You can

also key in the settings manually or add and edit the settings with PC Suite.

For more information and for the appropriate settings, contact the network

operator or service provider that offers the service that you want to use.

To receive the service settings over the air, see Over the air settings service on

page 34.

Keying in the service settings manually

1. Press Menu, and select Services, Settings and Connection settings.

2. Select Active service settings.

3. Scroll to the connection set you would like to activate and press Activate.

You need to activate the connection set where you want to save the service

settings. A connection set is a collection of settings required to make a

connection to a service.

4. Select Edit active service settings.

Select each of the settings one by one and key in all the required settings

according to the information you have received from your network operator or

service provider. Note that all the bearer-related settings are in the Bearer

settings menu.

151

Making a connection to a service

Firstly, make sure that the service settings of the service you want to use are

activated. To activate the settings:

• Press Menu, and select Services, Settings and Connection settings. Select

Active service settings and scroll to the connection set you want to activate

and press Activate.

Secondly, make a connection to the service. There are three ways to connect:

• Open the start page, for example, the homepage of the service provider:

Press Menu, and select Services and Home, or in standby mode press and hold

• Select a bookmark of the service:

Press Menu, and select Services, Bookmarks, and select a bookmark.

If the bookmark does not work with the current active service settings, activate

another set of service settings and try again.

• Key in the address of the service:

Press Menu, and select Services and then Go to address. Key in the address of

the service and press OK.

Browsing the pages of a service

After you have made a connection to the service, you can start browsing its pages.

The function of the phone keys may vary in different services. Follow the text

guides on the phone display. For more information, contact your service provider.

152

Note that if GPRS is selected as the data bearer, the indicator

is shown on the

top left of the display during browsing. If you receive a call or a text message, or

make a call during a (E)GPRS connection, the indicator will be shown on the

top right of the display to indicate that the (E)GPRS connection is suspended (on

hold). After a call, for example, the phone tries to reconnect the (E)GPRS

connection.

Using the phone keys while browsing

• Use any of the scroll keys to browse through the page.

• To select a highlighted item, press

for opening the link.

, or press Options to select the option

• To enter letters and numbers, press the keys

and to enter special

characters, press the key

Options while browsing

Press Options and the following options may be available. The service provider

may also offer other options. Select

•

Shortcuts to open a new list of options that are, for example, specific to the

page.

•

Add bookmark to save the page as a bookmark.

Bookmarks. See Bookmarks on page 155.

Download links to show the list of bookmarks for downloading.

Other options to show a list of other options, for example options for the wallet

and some security options.

153

•

Reload to reload and update the current page.

Quit. See Disconnect from a service on page 154.

Note: If you have tried to access or have accessed confidential information

requiring passwords (for example, your bank account), empty the cache of your

phone after each use.

To empty the cache, see The cache memory on page 158.

Direct calling

The multi-mode browser supports functions that you can access while browsing.

You can make a voice call, send DTMF tones while a voice call is in progress, and

save a name and a phone number from a page.

Disconnect from a service

To quit browsing and to end the connection, press Options and select Quit. When

Quit browsing? is shown, press Yes.

Alternatively, press

twice, or press and hold

Appearance settings of the multi-mode browser

1. While browsing, press Options and select Other options and Appear. settings,

or in standby mode, press Menu, and select Services, Settings and Appearance

settings.

154

2. Select Text wrapping. Select On and the text continues on the next line if it

cannot be shown on one line. If you select Off, the text is abbreviated if it is too

long to be shown on one line.

Select Show images. Select No and any pictures appearing on the page are not

shown. This can speed up the browsing of pages that contain a lot of pictures.

A cookie is data that a site saves in your phone’s browser cache memory. The data

can be, for example, your user information or your browsing preferences. Cookies

will be saved until you clear the cache memory, see The cache memory on page

158.

1. While browsing, press Options and select Other options, Security and Cookies,

or in standby mode, press Menu, and select Services, Settings, Security settings

and Cookies.

2. Select Allow or Reject to allow or prevent the phone receiving cookies.

Bookmarks

You can save page addresses as bookmarks in the phone’s memory.

1. While browsing, press Options and select Bookmarks,

or in standby mode, press Menu, and select Services and Bookmarks.

2. Scroll to the bookmark you want to use and press Options.

155

3. Select Go to to make a connection to the page associated with the bookmark.

You can also view the title and the address of the selected bookmark, edit or

delete the selected bookmark, or send it directly to another phone as a

bookmark, or as an OTA message, or create a new bookmark.

Note that your phone may have some pre-installed bookmarks for sites not

affiliated to Nokia. Nokia does not warrant or endorse these sites. If you choose to

access them, you should take the same precautions, for security or content, as you

would with any Internet site.

Receiving a bookmark

When you have received a bookmark (sent as a bookmark) 1 bookmark received is

displayed. Press View, then press Options and select View to view the bookmark,

Save to save the bookmark, or Discard to discard it.

Downloading

1. To download more tones, images, games or applications to your phone, press

Menu, and select Services and Download links.

2. Select Tone downloads, Graphic downloads, Game downloads or App.

downloads to download tones, images, games or applications, respectively.

Download content only from sources you trust.

156

Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider. Service messages are notifications of, for example, news

headlines, and they may contain a text message or an address of a service.

To access the Service inbox in standby mode, when you have received a service

message, press Show.

•

If you press Exit the message is moved to the Service inbox. To access the

Service inbox later, press Menu, and select Services and Service inbox.

To access the Service inbox while browsing, press Options and select Other

options and Service inbox. Scroll to the message you want, press Options. Select

Retrieve to activate the multi-mode browser and download the marked content,

or Details to display detailed information on the service notification, or select

Delete to delete it.

Service inbox settings

Press Menu, and select Services, Settings and Service inbox settings.

• Select Service messages and On (or Off) to set the phone to receive (or not to

receive) service message.

• Select Automatic connection. If you have set the phone to receive service

messages and select Automatic connection on, the phone will automatically

activate the browser from standby mode when the phone has received a

service message.

157

If you select Automatic connection off, the phone will activate the browser

only after you have selected Retrieve when the phone has received a service

message.

The cache memory

The information or services you have accessed are stored in the cache of your

phone. A cache is a buffer memory, which is used to store data temporarily. To

empty the cache:

• while browsing, press Options and select Other options and Clear the cache, or

• in standby mode, press Menu, and select Services, and Clear the cache.

Browser security

Security features may be required for some services, such as banking services or

shopping on a site. For such connections you need security certificates and

possibly a security module which may be available on your SIM card. For more

information, contact your service provider.

Security module

The security module can contain certificates as well as private and public keys. The

purpose of the security module is to improve security services for applications

requiring browser connection, and allows you to use a digital signature. The

certificates are saved in the security module by the service provider.

158

Press Menu and select Services, Settings, Security settings and Security module

settings. Select

•

Security module details to show the security module title, its status,

manufacturer and serial number.

Module PIN request to set the phone to ask for the module PIN when using

services provided by security module. Key in the code and select On. To disable

the module PIN request, select Off.

•

Change module PIN to change the module PIN, if allowed by the security

module. Enter the current module PIN code, then enter the new code twice.

Change signing PIN. Select the signing PIN you want to change. Enter the

current PIN code, then enter the new code twice.