* Some of the contents in this manual may differ from your
phone, depending on the software installed or your
service provider.
DUAL BAND
GPRS TELEPHONE
SGH-E700
ELECTRONICS
Printed in Korea
World Wide Web
Code No.: GH68-04278A
English. 01/2004. Rev.1.3
Contents
Important Safety Precautions ...................... 7
Unpacking.................................................... 9
Your Phone ................................................ 10
Phone Layout.................................................... 10
Displays ........................................................... 13
Backlight.......................................................... 17
Built-in Antenna ................................................ 17
Getting Started .......................................... 18
Inserting/Removing the SIM Card ........................ 18
Installing/Removing/Charging the Battery............. 19
Switching the Phone On or Off............................. 23
Selecting Functions and Options .......................... 24
Call Functions ............................................ 26
Making a Call .................................................... 26
Ending a Call..................................................... 29
Answering a Call................................................ 29
Rejecting a Call ................................................. 29
Adjusting the Volume......................................... 30
Accessing Options During a Call........................... 30
Using the Ear-microphone................................... 38
Entering Text ............................................. 39
Changing the Text Input Mode ............................ 40
Using the T9 Mode............................................. 41
Using the ABC Mode........................................... 43
Using the Symbolic Mode.................................... 45
Using the Number Mode ..................................... 45
Using the Menus......................................... 46
Accessing a Menu Function ................................. 46
List of Menu Functions........................................ 47
3
2
Contents
Contents
Phonebook Menu........................................ 53
Phone Settings........................................... 98
Find Name (Phonebook 1.1) ................................... 53
Add Entry (Phonebook 1.2) .................................... 56
Speed List (Phonebook 1.3).................................... 57
Copy All to Phone (Phonebook 1.4) ......................... 59
Send All via Infrared (Phonebook 1.5)..................... 60
Delete All (Phonebook 1.6)..................................... 62
Own Number (Phonebook 2.1)................................ 63
Group Setting (Phonebook 2.2)............................... 64
Memory Status (Phonebook 2.3)............................. 65
Service Directory (Phonebook 3.1).......................... 65
Greeting Message (Menu 4.1) ................................ 98
Display (Menu 4.2)................................................ 99
Language (Menu 4.3) ........................................... 101
Security (Menu 4.4).............................................. 102
Auto Redial (Menu 4.5)......................................... 105
Side Key (Menu 4.6)............................................. 105
Fax Mode (Menu 4.7)............................................ 106
Infrared Activation (Menu 4.8) .............................. 106
Reset Settings (Menu 4.9) .................................... 107
Organiser................................................. 108
Messages ................................................... 66
New Memo (Menu 5.1) ......................................... 108
Calendar (Menu 5.2)............................................. 110
To Do List (Menu 5.3)........................................... 113
Clock (Menu 5.4).................................................. 114
Alarm (Menu 5.5)................................................. 116
Calculator (Menu 5.6)........................................... 118
Conversion (Menu 5.7) ......................................... 119
Timer (Menu 5.8) ................................................. 120
Stopwatch (Menu 5.9) .......................................... 121
Short Message (Menu 1.1)..................................... 66
Multimedia Message (Menu 1.2) ............................. 72
Voice Mail (Menu 1.3)............................................ 83
Preset Messages (Menu 1.4) .................................. 84
Broadcast (Menu 1.5) ............................................ 84
Settings (Menu 1.6)............................................... 86
Memory Status (Menu 1.7) .................................. 89
Call Records ............................................... 90
Network Services..................................... 122
Missed Calls (Menu 2.1)......................................... 90
Received Calls (Menu 2.2)...................................... 90
Dialled Calls (Menu 2.3)......................................... 91
Delete All (Menu 2.4)............................................. 91
Call Time (Menu 2.5)............................................. 92
Call Costs (Menu 2.6) ............................................ 92
Call Diverting (Menu 6.1)...................................... 122
Call Barring (Menu 6.2)......................................... 124
Call Waiting (Menu 6.3) ........................................ 127
Network Selection (Menu 6.4) ............................... 128
Caller ID (Menu 6.5)............................................. 129
Active Line (Menu 6.6).......................................... 129
Sound Settings........................................... 94
Fun Box.................................................... 130
Incoming Calls (Menu 3.1)..................................... 94
Messages (Menu 3.2)............................................. 95
Power On/Off (Menu 3.3)....................................... 96
Connection Tone (Menu 3.4) .................................. 96
Key Tone (Menu 3.5)............................................. 96
Minute Minder (Menu 3.6)...................................... 97
Quiet Mode (Menu 3.7).......................................... 97
WWW Services (Menu 7.1).................................... 130
Media box (Menu 7.2)........................................... 137
JAVA World (Menu 7.3)......................................... 140
Games (Menu 7.4) ............................................... 144
5
4
Contents
Camera .................................................... 148
Take Photos (Menu 8.1)........................................ 148
My Photos (Menu 8.2)........................................... 153
My Albums (Menu 8.3).......................................... 153
Delete All (Menu 8.4)............................................ 154
Settings (Menu 8.5).............................................. 154
Memory Status (Menu 8.6) ................................... 155
Using ALS (Alternate Line Service) .......... 156
Solving Problems ..................................... 158
Access Codes ........................................... 161
Phone Password ............................................... 161
PIN................................................................. 161
PIN2............................................................... 162
PUK................................................................ 162
PUK2 .............................................................. 162
Call Barring Password........................................ 163
Health and Safety Information................. 164
Exposure to Radio-Frequency Energy
(SAR Information) ............................................ 164
Precautions When Using Batteries....................... 165
Road Safety..................................................... 167
Operating Environment ..................................... 167
Electronic Devices............................................. 168
Potentially Explosive Atmospheres ...................... 170
Emergency Calls............................................... 170
Other Important Safety Information.................... 172
Care and Maintenance....................................... 172
Glossary................................................... 174
Index ....................................................... 178
Quick Reference Card............................... 183
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Sensible Use
Unpacking
Your package contains the following items:
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on, especially the phone is in
service.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
Travel Adapter
Hand Strap
Phone
then press the
key. If certain features are in
use, deactivate those features before you can make
an emergency call. Give all the necessary
information as accurately as possible. Do not cut off
the call until given permission to do so.
Battery
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Ear-Microphone
Owner’s Manual
Qualified Service
Note: The items supplied with your phone may be
Only qualified service personnel may install or
repair your phone.
different depending on the country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
For more detailed safety information, see “Health
and Safety Information” on page 164.
• Battery charger
• Simple hands-free kit
• Wearable Ear-Microphone
• Data kit
8
9
Your Phone
Your Phone
Closed View
Phone Layout
Camera
The following illustrations show the main elements
of your phone:
External
display
Camera key
Open View
Earpiece
Key(s)
Description
Perform the functions indicated by the
text above them, on the bottom line of
the display.
Folder
Main display
(soft keys)
In Menu Mode, scroll through the
menu options.
1
In Idle Mode, the Left key enters the
New SMS message writing screen,
the Right key enters the Incoming
call’s melody setting menu and the
Up key enters the Calendar menu.
The Down key enters the Camera
menu, when pressed and held it
switches the phone to the capture
mode.
Navigation keys
(Up/Down/Left/
Soft key (left)
Right)
Ear-microphone
Soft key (right)
jack
WAP Browser
key
Power On/Off /
Menu exit key
Volume/Menu
browse keys
Dial/Menu
confirmation key
Alphanumeric
keys
In Idle Mode, launches the WAP
(Wireless Application Protocol) browser
directly.
Cancel/Back/
Correction key
IrDA port
Microphone
Special
function keys
10
11
Your Phone
Key(s)
Your Phone
Description (continued)
Key(s)
Description (continued)
Makes or answers a call.
(on the left side of the phone)
In Idle Mode, accesses the call log list.
In Menu Mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
During a call, adjust the earpiece
volume.
In Idle Mode with the phone open,
adjust the key tone volume.
When pressed and held at an incoming
call with the folder closed, reject the
call or silence the ring tone. See
page 105.
Deletes characters from the display.
When pressed and held in Idle Mode,
quickly accesses the New memo
screen.
In Menu Mode, returns to previous
menu.
(on the right side of the phone)
Turns the camera capture mode on.
In capture mode, works as a camera
shutter.
Ends a call.
When pressed and held, switches the
phone on or off.
In Menu Mode, cancells your input and
returns to Idle Mode.
Displays
Main Display Layout
When pressed and held in Idle Mode,
quickly accesses your voice mail
server.
The display has three areas:
Icons
Enter numbers, letters and some
special characters.
Text and
graphic area
Used for various purposes in different
functions.
When pressed and held while entering
a phone number, the
pause.
key enters a
Soft keys
Indications
Menu
Phonebook
When pressed and held in Idle Mode,
the
key enters or exits the Quiet
Mode.
12
13
Your Phone
Your Phone
Icon Description (continued)
Area
Description
Appears when you have new or unread
messages.
First line
Displays various icons. See
page 14.
Appears when you have new or
unchecked multimedia messages.
Middle lines
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
Appears when you are retrieving a
multimedia message.
Last line
Shows the functions currently
assigned to the two soft keys.
Appears when you set the alarms to ring
at a specified time.
Appears when the IrDA port is active. For
details, see page 106.
Icons
Icon Description
Appears when you connect the phone to
the computer by the IrDA port.
Shows the received signal strength. The
more the number of bars, the stronger
the signal.
Appears when you are connected to the
GPRS network.
Appears when a call is in progress. When
your SIM card supports ALS (Alternate
Line Service), this icon may appears with
the number 1, 2, or both.
Appears when the Call diverting feature is
activated.When your SIM card supports
ALS (Alternate Line Service), this icon
may appears with the number 1, 2, or
both.For example:
,
,
.
For example:
,
,
.
Appears when you are at the home zone.
May be shown only if your service provider
supports this feature)
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
(
Appears when your are at the office zone.
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
(May be shown only if your service provider
supports this feature)
Service), this icon may appears like
,
,
.
14
15
Your Phone
Your Phone
After the backlight turns off, if no key is pressed
Icon Description (continued)
within a given period of time, depending on the
Light time menu option (Menu 4.2.5.2), the
external display goes into the Off Mode to save the
power. Press and hold one of the volume keys to
awake the external display from the Off Mode.
Appears when you set the alert type for
incoming calls to Vibration or Vibration
then melody. For further details, see
page 94.
Appears when the Quiet Mode is active.
Backlight
Shows the level of your battery. The more
bars you see, the more power you have
left.
The main display and the keypad are illuminated by
a backlight. When you press any key or open the
folder, the backlight illuminates. It turns off if no
key is pressed within a given period of time,
depending on the Backlight menu option. For
further details, see page 100.
Main Display Off Mode
If you don’t press any key in a minute after
dimming of the main display, the main display goes
into the Off Mode to save the power. Press any key
to awake the main display from the Off Mode.
Note: The backlight remains on at all times when the
phone is connected to an optional car kit.
External Display
Built-in Antenna
Your phone has an external display on the folder.
It indicates that you have an incoming call or
message, and notifies you at the specified time
when you set an alarm.
Your phone has a built-in antenna. As with other
mobile radio transmitting equipment, do not touch
the antenna unnecessarily when the phone is
switched on. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than needed.
It is also an service available indicator. When you
set the Service light option (Menu 4.2.5.3) to
Type 1 or Type 2, it works. But the phone is no
service area, it doesn’t work.
When you press and hold one of the volume keys
with the folder closed, the external display’s
backlight illuminates.
When the ear-microphone is connected to the
phone, you can also use the button on it to turn it
on.
16
17
Getting Started
Getting Started
Removing the SIM Card
To remove the SIM card, slide the card out of the
holder, as shown.
Inserting/Removing the SIM Card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when
handling, inserting or removing the card.
Installing/Removing/Charging the
Battery
• When installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Inserting the SIM Card
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 130 minutes.
1. If necessary, remove the battery by referring to
page 19.
2. Insert and slide the SIM card under the two
tabs, ensuring that the notched corner is top left
and the gold contacts of the card face into the
phone.
Installing the Battery
1. Insert the teeth on the bottom of the battery
into the corresponding slots on the phone.
18
19
Getting Started
Getting Started
2. Press the battery against the back of the phone
until it clicks into place.
Charging the Battery by Using the Travel
Adapter
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into the
jack at the bottom of the phone.
Check that the arrow on the connector is facing
towards the front of the phone.
Removing the Battery
1. Switch off the phone by pressing and holding the
key.
2. To remove the battery, pull the battery catch
toward the top of the phone and hold it in that
position. Lift the battery away from the phone.
2. Plug the adapter into a standard AC wall outlet.
While charging, the battery icon at the top right-
hand corner of the displays repeatedly fills to
show that the battery is charging.
20
21
Getting Started
Getting Started
3. When charging is finished and the battery icon
becomes solid and “Fully charged” message is
displayed, disconnect the adapter from the
power outlet and from the phone by pressing
the grey tabs on both sides of the connector and
pulling the connector out.
Switching the Phone On or Off
To switch the phone on:
1. Open the folder.
2. Hold down the
switches on.
key until the phone
3. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 161.
The phone searches for your network and the
current date and time appear on the main and
external displays. After finding it, you can make
or receive a call.
Service Provider
Wed 17 Sep 03
Low Battery Indicator
12:53
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
12:53
Wed 17/09
(
), you hear a warning tone and a message
repeats at regular intervals on the display.
Menu
Phonebook
When the battery becomes too weak for the phone
to operate, it switches off automatically.
Note: To change the language, use the
Language menu option (Menu 4.3).
For further details, see page 101.
To switch the phone off:
Hold down the
key until the power-off
animation displays.
22
23
Getting Started
Getting Started
To view various functions/options available or select
the one is required:
Selecting Functions and Options
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
1. Press the appropriate soft key.
2. To
select the:
Press the
the two soft keys marked
and
. Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
Select soft key.
• function displayed
• option highlighted
The roles of the soft keys vary according to the
current context; the labels or icons on the bottom
line of the display and just above the soft keys
indicate their current roles.
view the next function or Down key.
highlight the next option
on a list
Example:
move back to the
previous function or
option on a list
Up key.
Service Provider
Wed 17 Sep 03
12:53
move back up one level
in the structure
(or Back) soft
key or C key.
return to Idle Mode
key.
Menu
Phonebook
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the Ok soft key.
1
Press the right soft
Press the left soft
key to access the
Phonebook feature.
key to access the
menu functions.
24
25
Call Functions
Call Functions
Making an International Call
1. Press and hold the 0 key for the international
Making a Call
prefix. The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
Using the Number Keypad
When the idle screen is displayed, enter the area
Making a Call from Phonebook
code and phone number, and press the
key.
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly called the Phonebook. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number.
Note: If you have set the Auto redial option (Menu
4.5) to On, the number is redialled
automatically up to ten times if the person you
called does not answer or the line is busy. For
further details, see page 105.
For further details about the Phonebook feature,
see page 53.
Correcting the Number
To clear
Press the
Using the Call Logs
the last digit
displayed
C key.
The phone stores up to 20 calls dialled, received or
missed chronologically. The last call is saved in the
first position. If the same number occurs more than
once, only the latest occurrence is saved.
any other digit in
the number
Left or Right key until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the C key.
You can also insert a missing
digit simply by pressing the
appropriate key.
To recall any of these numbers:
1. Press the
log list.
key in Idle Mode to access the Call
the all digits
displayed
C key and hold it down for
more than one second.
2. Use the Up and Down keys to scroll through the
list until the number you want highlights.
The call logs are listed with the following icons:
•
•
•
: Dialled calls
: Received calls
: Missed calls
26
27
Call Functions
Call Functions
3. To dial the number, press the
key.
Speed-dialling from Phonebook
To view each call record, see “Call Records” on
page 90.
Once you have stored numbers in the Phonebook,
you can dial a number simply by pressing one or
two keys. For further details, see page 57.
Viewing Missed Calls
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
Ending a Call
When you want to finish your call, briefly press the
key or close the folder.
The number of missed calls displays on the idle
screen immediately after a call was missed.
Answering a Call
To view the missed calls immediately:
1. If the folder is closed, open it.
When somebody calls you, the phone rings and
displays the incoming call animation.
2. Press the Missed soft key.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
The list of the missed calls displays.
3. If necessary, scroll to the number you want by
pressing the Up or Down key.
To answer a call, open the folder. If it is already
open, press the
key or Accept soft key.
4. To dial the number, press the
key.
Note: You can answer a call while using Phonebook or
menu features. The current operation stops.
To use the missed call options, see “Missed Calls”
on page 90.
Note: To clear the missed call notification on the
Rejecting a Call
display, press the
key. When you also
have voice mails, short messages or
multimedia messages and multi CBs, the right
soft key indication changes in the following
To reject an incoming call, press the
Reject soft key.
key or
order: Missed
,
Connect, View, CB and
If the Side key option is set to Reject, you can
press and hold one of the volume keys on the left
side of the phone to reject an incoming call; see
page 105.
Phonebook
.
28
29
Call Functions
Call Functions
Switching the Microphone Off (Mute)
Adjusting the Volume
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Example: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. But it is not fixed.
Press the
the
key to increase the volume level and
key to decrease it.
1. Press the Options soft key.
2. When Mute highlights, press the Select soft
key.
The Mute icon (
) appears on the bottom line
of the display and your correspondent can no
longer hear you.
1
To switch the microphone back on:
1. Press the Options soft key.
2. When Unmute highlights, press the Select soft
key.
In Idle Mode with the folder open, you can adjust
the key tone volume using the and keys.
The Mute icon disappears and your
correspondent can hear you.
Note: When a call comes in, you can reject the call or
mute the call ringer by pressing and holding
one of the volume keys, depending on your
setting of the Side key menu option (Menu
4.6). For further details, see page 105.
Muting/Sending Key Tones
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
Accessing Options During a Call
To communicate with answering machines or
computerised telephone systems, the Send keys
option must be selected.
Your phone provides a number of control functions
that you can use during a call.
30
31
Call Functions
Call Functions
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 127). You will be notified of an
incoming call by a call waiting tone.
To answer a call while you have another call in
progress:
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want
by pressing the Retrieve soft key.
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
To make a call while you have a call in progress:
2. To switch between the two calls, press the Swap
1. Enter the phone number that you want to dial or
look it up in the Phonebook.
soft key.
3. To end the call on hold, press the Options soft
2. Press the
key to dial the second call.
key and select the End held call option.
The first call is automatically put on hold.
To end the current call, press the
key.
Or alternatively:
The call on hold is automatically reconnected to
you.
1. Put the current call on hold by pressing the Hold
soft key.
Transferring a Call
2. Make the second call in the normal way.
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You are
disconnected from both of them.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
1. During a call, answer or make a call in the
normal way, and press the Options soft key.
To end the call on hold, press the Options soft key
and select the End held call option.
2. Press the Up or Down key to select the Transfer
option and press the Select soft key.
When you want to finish, end each call normally by
The two people are connected to each other.
pressing the
key.
32
33
Call Functions
Call Functions
3. To read a received message, select the Step
Searching for a Number in Phonebook
option, and then scroll to the message that you
want to read.
You can search for a number in your Phonebook
during a call.
To write a new message, select the New
1. Press the Options soft key.
message option.
2. If necessary, press the Up or Down key to
highlight the Phonebook option. Press the
Select soft key.
4. Press the Select soft key.
For further details about the SMS feature, see
page 66.
3. Select the Find name option and press the
Select soft key.
Making a Multi-party Call
The Phonebook entries are listed.
A multi-party call feature is a network service that
allows up to six people to take part simultaneously
in a multi-party or conference call. For more
information, contact your service provider.
4. Enter the first a few letters of the name that you
want to find.
The Phonebook entries are listed starting with
the first entry matching your input.
Setting up the Multi-party Call
Note: You can also scroll through Phonebook from
1. Call the first participant in the normal way.
the beginning, by pressing the Up or Down
key
.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
5. To view the highlighted entry, press the Ok soft
key.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
For further details about the Phonebook feature,
see page 53.
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
Using the Message Service
You can read or write a new message during a call.
1. Press the Options soft key.
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
2. Press the Up or Down key to highlight the
Message option. Press the Select soft key.
34
35
Call Functions
Call Functions
Now you can talk privately with that person. The
other participants can continue to converse with
each other
Having a Second Call During a Multi-party Call
To answer or make a call when you have the multi-
party call:
3. To return to the multi-party call, press the
1. To place the multi-party call on hold, press the
Options soft key and select the Join option.
Hold soft key.
4. Press the Select soft key.
2. Answer or make a call in the normal way.
All of the multi-party call participants can now
hear each other.
3. You can reactivate the multi-party call on hold
by pressing the Retrieve soft key.
Removing One Participant
To end the multi-party call on hold, press the
Options soft key and select the End held
multiparty option.
1. Press the Options soft key and select the
Remove option.
To answer an incoming call when you have the
multi-party call in progress and another call on
hold:
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
1. Press the Accept soft key.
2. Select the End held option to end the call on
3. End the multi-party call by closing the folder or
hold.
pressing the
key.
Or, select the End current option to end the call
in progress.
3. Answer the new call by pressing the
key.
Having a Private Conversation With One
Participant
1. Press the Options soft key and select the Split
option. Press the Select soft key.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
36
37
Call Functions
Entering Text
Using the Ear-microphone
At many times while you are using your phone, you
need to enter text, such as when storing a name in
the Phonebook, writing a new message, creating
your personal greeting or scheduling events on your
calendar.
With the ear-microphone, you can make or answer
a call without holding the phone.
When you connect the ear-microphone to the jack
at the left side of the phone, the button on the
ear-microphone works as listed below:
You are provided with the following text input
modes:
*
To
Press
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the 5
key once, J, K or L may be displayed. The T9
mode automatically compares your keystrokes
with an internal linguistic dictionary to determine
the correct word, thus requiring far fewer
redial the last call
answer a call
the button twice in Idle Mode.
and hold the button when
you receive the call.
end a call
and hold the button when
you have finished the call.
keystrokes than the traditional ABC mode.
• ABC mode
This mode allows you to enter letters by pressing
the key labelled with the required letter once,
twice, three or four times until the letter displays.
• Number mode
This mode allows you to enter numbers.
• Symbolic mode
This mode allows you to enter special characters.
*
is a registered trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/ 6,011,554.
38
39
Entering Text
Entering Text
Quickly Changing the Text Input Mode
Changing the Text Input Mode
To switch between the
Number and previous mode
Symbol and previous mode
ABC and T9 mode
Press and hold the
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
key.
key.
Example: Entering a name in the Phonebook
right soft key.
Enter name
Using the T9 Mode
To type a word in the T9 mode:
1. Start entering the word by pressing keys 2 to 9.
Press each key only once for each letter.
Text input mode indicator:
T9 English mode
20
Ok
Eng
Example: To enter “hello” in the T9 mode, press
the 4, 3, 5, 5, and 6 keys.
To change to another text input mode:
Thewordyouaretypingappearsonthedisplay.
It may change with each key that you press.
1. Press the right soft key indicating the current
text input mode.
2. Enter the whole word before editing or deleting
any keystrokes.
2. Scroll to the mode you want to use by pressing
the Up or Down key.
3. If the word is correct, start entering the next
word. Otherwise, press the 0 key repeatedly to
display alternative word choices for the keys
that you have pressed.
The Language select option allows you to
change the text input language.
You can use the Add word option to add new
words into the T9 dictionary. See page 42.
Example: Both “of” and “me” have the sequence
of 6 and 3. The phone displays the
Note: If you want to exit the menu without
most commonly used choice first.
changing the mode, press the
key.
soft key or
4. Insert a space between words by pressing the
key.
3. Press the Select soft key to confirm the
highlighted text input mode.
5. Continue entering the next word.
40
41
Entering Text
Entering Text
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in the T9 mode,
change the text input mode to the ABC mode, or
proceed as follows:
Entering a Number directly
To enter a number, press and hold the number key.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
Clearing Letters and Words
2. Enter the word you want to add using the ABC
To clear the letter to the left of the cursor, press the
C key. You can clear all of the letters on the display
by pressing and holding the C key.
mode (see page 43) and press the Ok soft key.
The word is saved in the T9 dictionary and
inserted in the input field.
Returning to the Previous Screen
3. Continue entering other words in the T9 mode.
When the text input field is cleared, press and hold
the C key to return to the previous screen.
Smart Punctuation
To enter periods, hyphens or apostrophes, press the
1 key. The T9 mode applies rules of grammar to
insert the correct punctuation.
Using the ABC Mode
Example: The 1 key is used twice to display two
When typing in the ABC mode, press the key
labelled with the required letter:
- Once for the first letter
punctuation marks.
- Twice for the second letter
- And so on
l
e
t
‘
s
e
a
t
.
Example: To display the letter “C”, quickly press the
2 key three times. To display the letter
“K”, press the 5 key twice. This method is
called Multi-tap typing.
Changing the Case
To change the case of the next letter(s) that you
type, press the key. There are three cases:
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
press the Right key or wait a few seconds for
the cursor to move to the right automatically,
and then enter the next letter.
• Lower Case (no indicator)
• Initial Capital (
• Capital Lock (
)
)
Inserting a Space
To insert a space between words, press the
Refer to the table for more information about the
characters available. The characters vary,
key.
42
43
Entering Text
Entering Text
depending on the text input language. You can
select the language by setting one of the following
options:
Entering a Number directly
To enter a number, press and hold the number key.
Scrolling
• Language select; see page 40
To move the cursor to the left or right within the
text, press the Left or Right key.
• Input mode (Menu 4.3.2); see page 101
List of the characters available
Clearing Letters and Words
Key
1
Characters in the Order Displayed
To clear the letter to the left of the cursor, press the
C key. You can clear all of the letters on the display
by pressing and holding the C key.
.
,
-
C
F
I
?
!
‘
@
:
1
2
A
D
G
J
B
E
H
K
2
Returning to the Previous Screen
3
3
When the text input field is empty, press and hold
the C key to return to the previous screen.
4
4
5
L
5
6
M
P
N
O
R
V
Y
6
S
8
Z
Using the Symbolic Mode
7
Q
U
X
7
9
The Symbolic mode enables you to enter symbols in
your text.
8
T
W
0
9
0
To
Press the
(Capital Lock mode in English
)
display more
symbols
Up or Down key.
Changing the Case
To change the case of the next letter(s) that you
enter a symbol
corresponding number key.
type, press the key. There are three cases:
return to the
previous text input
mode
Ok or
soft key.
• Lower Case (no indicator)
• Initial Capital (
• Capital Lock (
)
)
Using the Number Mode
Inserting a Space
To insert a space between words, press the
key.
The Number mode enables you to enter numbers in
your text. Press the keys corresponding to the
digits you want to enter.
44
45
Using the Menus
Using the Menus
Example: To access the Voice mail menu option,
press the Menu soft key, 1, 3 in Idle Mode.
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
List of Menu Functions
Accessing a Menu Function
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
The menus and sub-menus can be accessed by
pressing the Menu or Phonebook soft key in Idle
Mode, then scrolling with the navigation keys.
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
1. In Idle Mode, press the Menu soft key to access
the main menu or press the Phonebook soft
key to access Phonebook menu.
Phonebook Menu
2. Scroll through the menus using the Left or Right
key.
1. Phonebook (see page 53)
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
1.1 Find name
1.2 Add entry
1.3 Speed list
4. Press the Select soft key to access the sub-
1.4 Copy all to phone
1.5 Send all via infrared
1.6 Delete all
menu.
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
2. Management (see page 63)
5. Scroll to the option you want to choose with the
Up or Down key.
2.1 Own number
2.2 Group setting
2.3 Memory status
6. Press the Select soft key to choose the setting.
3. Services (see page 65)
Note: You can return to the previous menu level by
pressing the
soft key.
3.1 Service directory
You can also access the menus and sub-menus by
quickly entering the corresponding menu number.
46
47
Using the Menus
Using the Menus
2.5 Call time
2.5.1 Last call time
Main Menu
2.5.2 Total sent
2.5.3 Total received
1. Messages (see page 66)
1.1 Short message
1.1.1 Inbox
2.5.4 Reset timers
*
2.6 Call costs
1.1.2 New message
1.1.3 Outbox
1.1.4 Delete all
1.2 Multimedia message
1.2.1 Inbox
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
2.6.4 Reset counters
2.6.5 Set max cost
2.6.6 Price/Unit
1.2.2 New message
1.2.3 Outbox
1.2.4 Draft
3. Sound settings (see page 94)
1.2.5 My folder
1.2.6 Delete all
1.3 Voice mail
1.3.1 Connect to voice mail
1.3.2 Voice server number
1.4 Preset messages
1.5 Broadcast
1.5.1 Read
3.1 Incoming calls
3.1.1 Default melodies
3.1.2 My sounds
3.1.3 Ring volume
3.1.4 Alert type
3.2 Messages
3.2.1 Short message
3.2.2 Multimedia message
3.3 Power on/off
3.4 Connection tone
3.5 Key tone
3.6 Minute minder
3.7 Quiet mode
1.5.2 Receive
1.5.3 Channel
1.5.4 Language
1.6 Settings
1.6.1 Short message
1.6.2 Multimedia message
1.7 Memory status
1.7.1 Short message
1.7.2 Multimedia message
4. Phone settings (see page 98)
4.1 Greeting message
4.2 Display
2. Call records (see page 90)
4.2.1 Wallpaper
4.2.2 Skin
4.2.3 Backlight
4.2.4 LCD brightness
4.2.5 Front LCD
4.3 Language
2.1 Missed calls
2.2 Received calls
2.3 Dialled calls
2.4 Delete all
4.3.1 Text language
4.3.2 Input mode
* Shown only if supported by your SIM card.
48
49
Using the Menus
Using the Menus
4.4 Security
4.4.1 PIN check
6. Network services (see page 122)
6.1 Call diverting
6.1.1 Divert always
4.4.2 Change PIN
4.4.3 Phone lock
4.4.4 Change password
4.4.5 Privacy
4.4.6 SIM lock
4.4.7 FDN mode
6.1.2 Busy
6.1.3 No reply
6.1.4 Unreachable
6.1.5 Cancel all
*
6.2 Call barring
4.4.8 Change PIN2*
6.2.1 All outgoing
6.2.2 International
6.2.3 International except to home
6.2.4 All incoming
6.2.5 Incoming while abroad
6.2.6 Cancel all
4.5 Auto redial
4.6 Side key
4.7 Fax mode
4.8 Infrared activation
4.9 Reset settings
4.9.1 Sound settings
4.9.2 Phone settings
4.9.3 All settings
6.2.7 Change barring password
6.3 Call waiting
6.4 Network selection
6.5 Caller ID
5. Organiser (see page 108)
*
6.6 Active line
5.1 New memo
5.2 Calendar
5.3 To do list
5.4 Clock
5.4.1 Set time
5.4.2 Set date
5.4.3 Set world time
5.4.4 Set format
5.5 Alarm
5.6 Calculator
5.7 Conversion
5.7.1 Currency
5.7.2 Length
5.7.3 Weight
5.7.4 Volume
5.7.5 Area
7. Fun box (see page 130)
**
7.1 WWW Services
7.1.1 Home
7.1.2 Bookmark
7.1.3 Go to URL
7.1.4 Clear cache
7.1.5 Proxy settings
7.1.6 Current proxy
7.1.7 Push messages
7.2 Media box
7.2.1 Photos
7.2.2 Images
7.2.3 Sounds
7.2.4 Delete all
7.2.5 Memory status
5.7.6 Temperature
5.8 Timer
5.9 Stopwatch
*Shown only if it is supported by your SIM card
** May not be shown or supported by your network service
provider.
* Shown only if it is supported by your SIM card.
50
51
Using the Menus
Phonebook Menu
Phonebook offers the following features:
7.3 JAVA world
7.3.1 Downloads
7.3.2 DNS setting
7.3.3 Memory status
7.4 Games
• Phonebook: allows you to find, create or set up
the speed-dialling feature and manage
Phonebook entries.
7.4.1 Honey ball
7.4.2 Go! Hamster
7.4.3 Bowling
• Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
8. Camera (see page 148)
• Services: allows you to use the service directory
depending on your SIM card.
8.1 Take photos
8.2 My photos
8.3 My albums
8.4 Delete all
8.5 Settings
8.6 Memory status
Find Name (Phonebook 1.1)
To search for a number in the phonebook, proceed
as follows.
9. SIM AT(Application Toolkit)*
1. Enter a letter(s) of the name that you want to
find.
The Phonebook entries are listed, highlighting
the entry matching your input.
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the Ok
soft key.
4.
To
Press the
dial the displayed
number
key.
change the
Phonebook entries
Options soft key. For
further details, see
page 54.
*Shown only if it is supported by your SIM card.
52
53
Phonebook Menu
Phonebook Menu
The following options are available:
Changing the Phone Memory Entries
Edit number
Scroll to the category that you want to edit by
pressing the Left or Right key. Following categories
are available and you can edit information of each
category by pressing the Options soft key.
This option allows you to change the number. You
can also add a new number if none has been stored
for the selected category.
Category Then
Change name
Mobile
Home
Office
Fax
Select one of the following options. For
details for these options, refer to the
page 55.
This option allows you to change the name of the
entry.
To clear the old name, press the C key. For more
information about how to enter characters, see
page 39.
Edit number
Change name
Other
Send message (shown if the category
contains a number)
Send message
This option allows you to send a message to the
number. For more information about how to send a
message, see page 69.
Copy (shown if the category contains a
number)
Send via infrared (shown if the
category contains a number)
Copy
Delete entry
This option allows you to copy the entry from the
phone’s memory to the SIM card, and vice versa.
E-Mail
Group
Graphic
Alert
Enter or edit e-mail address.
Set one of the groups or no group.
Set one of the images or no image.
Set one of the melodies or not assign.
Send via infrared
This option allows you to copy the entry from your
phone to another device that has the IrDA port via
infrared.
Delete entry
Changing the SIM Memory Entries
This option allows you to delete the entry from
Phonebook. To confirm the deletion, press the Yes
soft key. Otherwise, press the No soft key.
To change the SIM memory entry’s information,
press the Options soft key.
54
55
Phonebook Menu
Phonebook Menu
6. When you are satisfied, press the Ok soft key.
Add Entry (Phonebook 1.2)
7. If you select Phone in step 3, go to step 8.
You can store phone numbers and the
If you select SIM in step 3, enter the location
number and press the Ok soft key.
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone memory and each name can be
associated with up to five numbers.
8. If you want to change the entry, use the options.
for information about how to do it, see page 54.
1. Enter the number you want to save.
If you want to return to Idle Mode, press the
soft key or the
key.
Notes
:
• If you make a mistake while entering a number,
correct it using the
page 26.
C
key. For further details, see
Storing a Number in Idle Mode
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the Phonebook.
the
key. “P” is displayed to indicate the pause.
Continue the procedure from step 1 on page 56 to
store the number.
2. When you are sure that the number is correct,
press the Save soft key.
3. Select the memory where the number is to be
stored, either Phone or SIM, and press the
Select soft key.
Speed List (Phonebook 1.3)
Note: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be stored again.
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
Setting Up Speed-dial Entries
4. If you select SIM in step 3, go to step 5.
1. Press the Up or Down key to scroll to an empty
If you select Phone in step 3, choose a number
type using the Up or Down key and press the
Select soft key.
location and press the Select soft key.
2. When the Edit number option highlights, press
the Select soft key.
5. Enter the associated name.
3. Enter a phone number and press the Ok soft
For information about how to enter characters,
see page 39.
key. Or,
56
57
Phonebook Menu
Phonebook Menu
To retrieve a number from your Phonebook,
press the Phonebook soft key. Select an entry
from the list and press the Ok soft key. Press
the Ok soft key to save it.
Dialling a Number Stored in the SIM Card
Once you have stored phone numbers in your SIM
card, you can dial them easily whenever required.
To dial a number stored in the SIM card:
4. When you have finished, press the
the key to exit.
soft key or
1. Enter the number of the SIM card location where
the number you want to dial is stored.
Editing the Speed-dial Entries
2. Press the
key.
1. Select the speed-dial entry you want to edit
The display shows the name and number stored
in that location.
from the list and press the Select soft key.
2. Select one of the following menu options by
pressing the Up or Down key and press the
Select soft key:
3. Press the Dial soft key or the
key.
• Edit number: allows you to change the
number.
Copy All to Phone (Phonebook 1.4)
• Change name: allows you to change the
name of the entry.
You can copy all of the numbers stored in the SIM
card to the phone’s memory.
• Delete: allows you to clear the setting so that
1. When a confirming message appears, press the
no number is assigned to the key.
Yes soft key to copy.
3. When you have finished, press the
the key to exit.
soft key or
The number are copied to the phone’s memory,
labelled with Mobile by default.
Otherwise, press the No soft key.
Using the Speed-dial Feature
2. When you have finished, press the
the key to exit.
soft key or
When the idle screen is displayed, press the number
key, 2 to 9, assigned to the speed-dial entry and
press the
key. You can also press and hold the
number key.
Note: The
1
key is reserved for your voice mail server
number.
58
59
Phonebook Menu
Phonebook Menu
Send All via Infrared (Phonebook 1.5)
Via the infrared connection, you can send your
Phonebook entries to another IrDA- compliant
devices and vice versa.
Note: This feature may not be available depending on
the devices.
IrDA port
IrDA port
Sending Your Phonebook
1. Align the IrDA ports on both sides each other.
Receiving Phonebook from Another Device
2. Access the Send all via infrared menu option
in the Phonebook menu and choose one of the
following options and press the Select soft key:
1. Align the IrDA ports on both sides each other.
2. Access the Infrared activation menu (Menu
4.8) and select On to activate the port.
• All: allows you to send all of the entries, from
the entry you choose to the end of the SIM
card and Phone list.
3. When your phone receives Phonebook data from
the other device:
• SIM: allows you to send all of the entries,
from the entry you choose to the end of the
SIM card list.
If the other person sends you one entry, your
phone displays the name and the phone number
and you can specify whether or not you want to
save it. Continue to step 4.
• Phone: allows you to send all of the entries,
from the entry you choose to the end of the
Phone list.
If the person sends you the entries by All, SIM,
Phone you can select a memory location, SIM
card or phone’s memory. Continue to step 5.
3. When you select All, your phone displays all of
the Phonebook entries.
4. Press the Save soft key to store the entry.
When you select SIM or Phone, all of the
entries stored in the corresponding memory
location are listed.
You can also delete the entry by pressing the
Cancel soft key.
4. Scroll to the entry you want to send and press
5. Press the SIM or Phone soft key.
the Select soft key.
The entries are saved in the appropriate
memory.
Your phone begins sending the entry(ies).
60
61
Phonebook Menu
Phonebook Menu
Delete All (Phonebook 1.6)
Own Number (Phonebook 2.1)
You can delete Phonebook entries selectively
depending on the memory location, or all entries at
once.
To store your own phone number(s) with a name:
1. Scroll to an empty location by pressing the Up or
Down key and press the Select soft key.
1. Scroll to a desired memory selection and place a
check mark ahead of it by pressing the Select
soft key.
2. When Edit number highlights, press the Select
soft key.
Selecting All places check marks on all of the
3. Enter your number and press the Ok key.
memories.
4. To assign a name, press the Down key to move
2. If necessary, repeat step 1 to check another
options.
to Change name and press the Select soft key.
5. Enter a name and press the Ok soft key.
3. When you have finished checking, press the Ok
6. When you have finished, press the
the key to exit.
soft key or
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the entries in the
memory(ies). Then enter the phone password
and press the Ok soft key.
To remove one of your numbers:
1. Select the entry you want to delete from the
Own number list and press the Select soft key.
The password is preset to “00000000” by
default. To change it, see page 103.
2. Scroll to Delete by pressing the Up or Down key
and press the Select soft key.
Otherwise, press the No soft key.
3. When a confirming message appears, press the
Yes soft key to delete the number.
Otherwise, press the No soft key.
4. When you have finished, press the
the key to exit.
soft key or
62
63
Phonebook Menu
Phonebook Menu
Group Setting (Phonebook 2.2)
Memory Status (Phonebook 2.3)
You can change the settings of the five predefined
caller groups.
You can check how many names are stored in SIM
card and phone’s memory.
When you have finished, press the
the key to exit.
soft key or
1. Select a caller group by pressing the Up or Down
key and press the Select soft key.
2. Scroll to a setting option by pressing the Up or
Down key and press the Select soft key.
Service Directory (Phonebook 3.1)
The following options are available:
• Melody: allows you to select a melody to
sound when a call comes in from a member in
the group.
Note: This feature may not be available depending on
your SIM card.
The display shows the list of the numbers in the
Service directory.
• Change name: allows you to change the
name of the group; for further details about
how to enter characters, see page 39.
If necessary, scroll to a number by pressing the Up
or Down key and press the
number.
key to dial the
• View image: shows the image to display
when a call comes in from a member in the
group.
3. Change the setting as required and press the
Select soft key.
4. Repeat steps 2 and 3 to change other options.
When you have finished, press the
the key to exit.
soft key or
64
65
Messages
Messages
Note: To clear the new message notification on the
display, press the key. When you also
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS: text message), Enhanced Message Service
(EMS: message including simple image, animation
or melody) and Multimedia Message Service
(MMS: message supporting the presentation of
various media types, such as full colour images and
polyphonic ring tones). Voice mails are also
available.
have missed calls, voice mails, short messages
or multimedia messages, and multi CBs, the
right soft key indication changes in the
following order: Missed, Connect, View, CB
and Phonebook
.
Managing memory
Inbox and Outbox share a given amount of memory
in your phone or SIM card. When the message
Note: This feature is only available if your service
provider’s network supports it. Contact your
service provider for more information.
memory is full, the New message icon (
and an error message displays. (It disappears when
you press the key, but it reappears if you
) blinks
don’t delete old messages.) In this case, you cannot
receive any new messages. You must delete one or
more old messages to get free memory for new
messages using the Delete option within the Inbox
or Outbox or the Delete all option; for further
details, see page 72.
Short Message (Menu 1.1)
Short message service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make short messages
consisting of simple pictures, melodies, animations
and styled text all of which adds a new dimension to
simple text messages.
Inbox (Menu 1.1.1)
Your phone receives incoming messages and saves
them in the Inbox. SMS is usually saved in the SIM
card, but if the SIM memory is full, the incoming
messages will be saved in the phone’s memory.
To send text messages by phone, you must obtain
the number of the SMS centre from your service
provider.
When the Inbox menu is selected, the list of
messages received displays with the:
Receiving a new message
When you receive a new message, the New
• sender’s phone number, or name if stored in the
Phonebook.
message icon (
) and a text notification showing
the number of the message appear on the display.
You also hear an alert, depending on the message
sound setting; for further details, see page 95.
• message status;
message to read or
message.
for a read message,
for an incomplete
for a
To read the new message(s) immediately, press the
View soft key. The list of the messages appears.
66
67
Messages
Messages
To view a message, scroll to it and press the Select
soft key. The screen shows the:
New Message (Menu 1.1.2)
Using this menu, you can write messages,
containing text, images and melodies.
• date and time when the message was received.
• memory where the message was stored;
for
1. Create a message.
the SIM card or
for the phone’s memory.
• message contents.
On the first line of the display, you see the
number of remaining characters you can enter,
the number of current message and the
maximum messages you can create, and the
font style you set in Text option.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message contents, press the
Up or Down key. When you focus on an object that
includes a melody, the melody is played.
Note: For further information about how to enter
characters, see page 39.
You can choose the following options by pressing
the Options soft key:
2. While entering your message, press the
Options soft key to use the following options.
Delete: allows you to delete the message.
• Send: allows you to send the message. Refer
to the next step.
Message reply: allows you to reply by sending a
message.
• Text: allows you to format the text. Following
text attributes can all be combined as
required.
Call back: allows you to call the sender back.
Cut number: allows you to send a message to the
number or paste the number into Phonebook.
Text size: Small/Medium/Large
Text mode: Normal/Underscore/Strikethrough
Bold: On/Off
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Italic: On/Off
Extract media: you can save media (except the
predefined EMS animations and sounds) from the
message into Media box. You can use these items
when writing a message; for further details, see
page 69.
Alignment: Left/Center/Right
• Add media: allows you to add pictures,
animations and/or melodies to the message.
Select a category; Add picture, Add
animation or Add melody. You can then
choose a factory-set object or an object that
you have received from another source and
stored in the Media box. See page 137.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory.
69
68
Messages
Messages
• Preset messages: allows you to add a preset
Outbox (Menu 1.1.3)
message to your text. Select one of nine
messages stored in the Preset messages
menu option (Menu 1.4). See page 84.
Outbox stores any messages that you have already
sent or just saved without sending.
• Save message: allows you to save the
message so that it can be sent later. You can
read the message in the Outbox.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• recipient’s phone number, or name if stored in the
Phonebook.
3. When you have finished entering your message,
choose Send from the options.
• message status;
a message to send.
for a sent message or
for
4. Enter a destination number on the Address
screen.
To view a message, scroll to it and press the Select
soft key. The screen shows the:
You can search for a number in the Phonebook
by pressing the Phonebook soft key.
• message status;
a message to send.
for a sent message or
for
for
Note: To clear or clear all your input, press or press
and hold the C key. When you have no input,
press and hold the C key to move to the
previous screen.
• memory where the message was stored;
the SIM card or
for the phone’s memory.
• message contents.
To send the message to multiple destinations up
to 5, press the Add soft key and repeat step 4.
You can scroll to the next or previous message by
pressing the Left or Right key.
5. When you have finished entering the numbers,
To scroll through the message, press the Up or
Down key.
press the Ok soft key.
6. If the Enter centre screen displays, enter the
You can choose the following options by pressing
the Options soft key:
service number and press the Ok soft key.
You can store the SMS service centre number. For
details, see page 86.
Delete: allows you to delete the message.
Cut number: allows you to send a message to the
Note: When the phone fails to send the message;
Press the Retry soft key to try again the
transmission. Or, press the No soft key and the
Save soft key to save the message or exit the
menu by pressing the No soft key.
number or paste the number into Phonebook.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
71
70
Messages
Messages
messages. This function is available only if it is
Delete All (Menu 1.1.4)
supported by your service provider. Only phones
that offer picture message features can receive and
display picture messages.
You can delete all messages stored in the SIM card
and phone’s memory in this menu.
1. Scroll to a message box and place a check mark
Retrieving a new message
ahead of it by pressing the Select soft key.
When you are retrieving a message, the Retrieving
Selecting All places check marks on all of the
message boxes.
icon (
retrieving a new message, the New message icon
) and a text notification showing the number of
the message appear on the display. You also hear
an alert, depending on the message sound setting;
for further details, see page 95.
) appears on the display. When you finish
(
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
To read the new message in Idle Mode, press the
View soft key. And then you see the list in the
Inbox. If you select a message, you can read it.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Notes:
• When you set the Message reception (see
page 87) to Automatic, you cannot enter the
Downloads menu (Menu 7.3.1) and cannot also
access WAP sites while retrieving a new message. If
you message comes in your phone while you play a
Java game, your phone only receive a notification
message. After playing the game, you can retrieve
the message with saved notification message.
• To clear the new message notification on the display,
Otherwise, press the No soft key.
Multimedia Message (Menu 1.2)
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides asynchronous delivery of
personal multimedia messages from between
phone and phone, phone and e-mail, phone and
web(by URL).
press the
key. When you also have missed
calls, voice mails, short messages or multimedia
messages, and multi CBs, the right soft key
indication changes in the following order: Missed
,
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and sounds. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Connect, View, CB and Phonebook
.
If Message reception was set to Manual (for
details, see page 87), when the New message icon
) appears on the display, you have to retrieve
messages in the Inbox. You select a message with
the icon such as and in the Inbox. Then
(
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
,
73
72
Messages
Messages
Note: The icon of message status can have
various forms like as the
you can select retrieve or delete message by
pressing the Opt. soft key.
,
,
priority that sender fixed (see page 87).
Managing memory
To view a message, scroll to it and press the Select
soft key.
When the memory is full, the New message icon
(
) blinks and an error message displays. (It
To scroll through the message contents, press the
Up or Down key. When the message has more than
one page, you can press the Left or Right key to
move through the pages or the pages are moved
through as predefined page timer, which the sender
sets, has elapsed.
disappears when you press the key, but it
reappears if you don’t delete old messages.) In this
case, you cannot receive any new messages. You
must delete one or more old messages to get free
memory for new messages using the Delete option
within the Inbox, Outbox, Draft or My folder, or the
Delete all option; for further details, see page 82.
Notes:
• Some types of sound or picture may not be able to
play or display.
• When the message has an attachment like video
Notes:
• You can only receive up to 150 messages.
• Multimedia message boxes, Camera, and Media box
share a given amount of memory in your phone. You
can also use the Delete or Delete all option to
delete some sounds or images in Camera or Media
box.
clips, the Attachment icon (
) appears on the title
line. You may not play the attachment. And you may
also not extract it from the message.
You can choose the following options by pressing
the Opt. soft key:
Inbox (Menu 1.2.1)
Delete: deletes the message.
Your phone receives incoming messages and saves
them in the Inbox.
Replay: replays the message.
Reply: replies to the sender by sending a message.
Forward: forwards the message to another person.
Call back: allows you to call the sender back.
When the Inbox menu is selected, the list of
messages received displays with the:
• message’s subject or No subject if the message
had no subject.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
• sender’s phone number
• message status;
a message to read,
for a read message,
for a read notification
for
message and
read.
for a notification message to
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
75
74
Messages
Messages
Properties: shows you detailed information about
the message.
Item
How to add
Picture To add a picture in Media box;
Move to My folder: moves the message to the My
folder for later use.
1. Select one of the pictures
categories. The picture list of the
category is displayed.
New Message (Menu 1.2.2)
2. Select one of picture you want to
add. The picture is displayed.
This menu option allows you to create a new
multimedia message and then send it to multiple
destinations.
3. Press the Add soft key.
1. Select one of the following items using the Up or
Sound
To add a new sound;
Down key and press the Add soft key.
1. Select the Record new option.
Item
How to add
2. Press the Record soft key to start
recording.
Subject 1. Enter a subject of your message.
For details about entering
3. Press the Stop soft key to stop
characters, see page 39.
recording.
2. Press the Ok soft key.
4. Press the Play soft key to replay the
sound. Or, press the Add soft key to
add it. Enter the sound’s name and
press the Ok soft key. The sound is
added to the message and saved in
Media box automatically.
Note: To return to previous screen while
entering a subject, press and hold
the C key.
Picture To add a new picture;
1. Select the Create new option.
To add a sound in Media box;
2. Take a photo using the camera
feature. For details about the
camera feature, see page 148.
1. Select one of the sound categories.
The sound list of the category is
displayed.
3. Select one of pictures you want to
add. The picture is displayed.
2. Select one of the sounds you want
to add.
4. Press the Add soft key.
3. Press the Select soft key to add it.
77
76
Messages
Messages
• Clear subject/picture/sound/message:
allows you to delete the subject, image, sound
or message by selected work.
Item
How to add
Message
1. Enter a new message. Or you can
enter a preset message.
• Delete page: allows you to delete the current
page.
To enter a preset message;
• Save message: saves the message in Draft
(Menu 1.2.4) or My folder (Menu 1.2.5).
• Press the Opt. soft key and select
the Preset messages.
• Select one of the preset
messages.
Note: To go back to the edit screen, press the
soft key or the
C
key.
2. Press the Opt. soft key and select
the Done option to add the
message.
3. When you finish creating the message, select
Send from the options.
4. Select an entry on the Send screen.
Note: To return to previous screen while
entering a message, press and
hold the C key.
If it is an empty entry, enter a destination as
below.
Number: to enter a destination number.
2. Press the Opt. soft key to use the following
options.
E-mail: to enter e-mail address.
• Preview: shows your message as it will
display on the recipient’s phone. To go back to
the message screen, press the Edit soft key.
To send the message, press the Send soft key
and go to step 4.
Phonebook: to enter a destination from the
Phonebook.
After entering a destination, press the Ok soft
key.
If it is not an empty entry, do the following
things.
• Send: allows you to send the message to
another person. Refer to the next steps.
• Add page: allows you to add up to 10 pages.
You can move to each page using the Left or
Right key on the message screen.
Edit address: to edit the selected address.
Delete address: to delete the selected
address.
• Page timing: allows you to set how long one
page of the received messages displays. After
a specified time, the display automatically
scrolls to the next page.
Note: To clear or clear all your input, press or press
and hold the C key. When you have no input,
press and hold the C key to move to the
previous screen.
• Text effect: allows you to set the colour, size
and style of the message text.
79
78
Messages
Messages
5. To send the message to multiple destinations up
to 20, repeat step 4.
You can choose the following options by pressing
the Opt. soft key:
6. When you have finished entering the
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
destinations, press the Send soft key.
Press the Cancel soft key not to send the
message.
Properties: shows you detailed information about
the message.
When the phone fails to send the message, press
the Retry soft key to try again the transmission.
Or, press the Cancel soft key to save the message.
Move to My folder: moves the message to the My
folder for later use.
Outbox (Menu 1.2.3)
Draft (Menu 1.2.4)
Outbox stores messages that you sent, you failed to
send and you cancelled sending.
This message box stores messages that you save,
interrupted messages by an incoming call or
message while you create a new message.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
Note: Saves messages that are failed to send in the
• message’s subject or No subject if the message
had no subject.
Outbox.
To view a message, scroll to it and press the Select
soft key.
• recipient’s phone number
• message status;
a message that you failed to send or you
cancelled sending, for a delivery report.
When a receiver retrieves a message you sent,
is changed into
for a sent message,
for
You can choose the following options by pressing
the Opt. soft key:
Send: replies to the sender by sending a message.
Replay: replays the message.
.
To view a message, scroll to it and press the Select
soft key.
Delete: deletes the message.
Properties: shows you detailed information about
the message.
To scroll through the message, press the Up or
Down key. When the message has more than one
page, you can press the Left or Right key to move
through the pages or the pages are moved through
as paging timing that sender fixed automatically.
81
80
Messages
Messages
2. If necessary, repeat step 1 to check another
My Folder (Menu 1.2.5)
box.
You can move the messages stored in the Inbox or
Outbox to the My folder by using the Move to My
folder option. While making a new message, you
can alos save to My folder by using the Save
message option.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
To view a message, scroll to it and press the Select
soft key.
Otherwise, press the No soft key.
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
Voice Mail (Menu 1.3)
When you receive a voice mail, your phone displays
the
icon and you hear an alert.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
Connect To Voice Mail (Menu 1.3.1)
• In Idle Mode, when you receive a new voice mail,
press the Connect soft key to access your voice
mail server and follow the instructions provided.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
• In Idle Mode, hold the 1 key down to access your
voice mail server and follow the instructions
provided.
Properties: shows you detailed information about
the message.
• Call your voice mail server number by accessing
the Connect to voice mail menu (Menu 1.3.1)
and follow the instructions provided.
Delete All (Menu 1.2.6)
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
Voice Server Number (Menu 1.3.2)
Before using the voice mail service, you must store
the voice mail server number obtained from your
service provider.
1. Scroll to a message box and place a check mark
ahead of it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
83
82
Messages
Messages
When you select an entry, following options are
available.
• the phone is in Idle Mode.
• the Receive option (Menu 1.5.2) is set to On.
Edit number: enter a voice mail server number or
press the Phonebook soft key to enter a number
from phonebook. And then press the Ok soft key.
• the message channel is currently active on the
channel list.
When you get broadcast messages, you can see the
messages in Idle Mode. If it is short you can see the
display, otherwise, press the CB soft key to read
the message.
Change name: enter a server name and press the
Ok soft key to save it.
Delete: when the confirming message appears,
press the Yes soft key. To cancel, press the No soft
key.
In the Broadcast menu option, the following
options are available:
Read: lets you read the received broadcast
messages.
Preset Messages (Menu 1.4)
Archive: shows the list of the messages you saved
from the temporary list.
Using this menu, you can preset up to nine
messages that you use most frequently. When you
access this menu, the preset message list displays.
Temporary: shows the latest messages. These
messages will be gone when the phone is switched
off.
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
If the message is long, press the UP or Down key.
When you read a message, press the Options soft
key to access following options:
2. Press the Select soft key and enter a new
message or change the old message.
Cut number: shows the list of numbers included in
the message.
For further details about entering characters,
see page 39.
Save: (Temporary only) saves this message to
Archive list.
3. Press the Ok soft key to save the message.
Delete: delete this message.
Delete All: delete all message on the list.
Broadcast (Menu 1.5)
Receive: allows you to turn the reception of
broadcast messages on or off.
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
85
84
Messages
Messages
Channel: the check mark inside All check box
indicates that the channel is enabled.
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
To enable or disable this channel press the Select
soft key, then select Enable or Disable.
Multimedia Message (Menu 1.6.2)
The Add channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel code obtained from your service provider
and a title for the channel.
Using this menu, you can set up default settings for
sending or receiving MMS message. The following
options are available:
Send settings: The following options are available:
Language: selects a language you prefer. Then, You
can get cell broadcast messages only in the language
you selected.
Priority: allows you to set the priority of message.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Settings (Menu 1.6)
Delivery after: you can set the delay time before
the phone sends your messages.
Short Message (Menu 1.6.1)
Leave a copy: allows you to copy the message that
you sent.
Using this menu, you can set up default SMS
information. The following options are available:
Address hiding: when this option sets to On, your
phone number does not display on the recipients
phone.
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Delivery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Read reply: when this option sets to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
Message type: allows you to set the message type
to Text, Fax, Voice, ERMES, X400, or E-Mail. The
network can convert the messages into the selected
format.
Receive settings: the following options are
available:
Message reception: allows you to set how you
receive a message. You can select one of Manual,
Automatic and Reject.
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
87
86
Messages
Messages
Anonymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
the address of the GPRS network gateway.
- Login ID: enter the user ID required to
Adverts reject: when this option sets to On, you
connect
can reject advertisements by service provider.
to GPRS network.
Report allowed: when this option sets to Off, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
- Password: enter the password required to
connect to the GPRS network.
• Bearer: select the bearer to be used for each type
of network accesses.
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
- GPRS only: it only work in GPRS network.
- GSM only: it only works in GSM network.
Current profile: allows you to select one profile to
use currently.
Profile setting: allows you to set up to five profiles.
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
Memory Status (Menu 1.7)
You can check the memory status for messages.
• GSM setting: allows you to change the proxy
settings for the GSM network.
Short Message (Menu 1.7.1)
- Gateway: enter the IP address and IP port.
- Data call type: select a network connection
type between ISDN and Analogue.
- Dial number: enter the server phone
number.
You can check how many messages are stored in
SIM card and phone’s memory.
When you have finished, press the
the key to exit.
soft key or
Multimedia Message (Menu 1.7.2)
- Login ID: enter the server login ID.
- Password: enter the server password.
Multimedia message boxes, Camera and Media box
share a given amount of memory in your phone.
The display shows the status of free and used
memory.
• GPRS setting: allows you to change the proxy
settings for the GPRS network.
You can see the used memory status of multimedia
message boxes, Camera and Media box by pressing
the Left or Right key.
- Gateway: enter the IP address and IP port.
- APN: enter the access point name used for
89
88
Call Records
Call Records
• delete all of the calls.
Via this menu, you can view the:
• calls you missed, received or dialled.
• cost of your calls.
• paste the number into Phonebook.
Dialled Calls (Menu 2.3)
• length of your calls.
Note: You can access the numbers in the three types
This option lets you view the last 20 dialled
numbers.
of call records by pressing the
Mode.
key in Idle
The number, or name if available, displays together
with the date and time when the call was made.
Missed Calls (Menu 2.1)
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all the calls.
This option lets you view the last 20 unanswered
calls if the caller line identification is available.
• paste the number in the Phonebook.
The number, or name if available, displays together
with the date and time when the call was missed.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
Delete All (Menu 2.4)
You can delete all of the numbers stored in each call
record.
• paste the number into Phonebook.
When a confirming messages appears, press the
Yes soft key to confirm.
Received Calls (Menu 2.2)
Otherwise, press the No soft key.
This option lets you view the last 20 received calls if
the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was received.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
90
91
Call Records
Call Records
The following options are available:
Call Time (Menu 2.5)
Last call cost: cost of the last call made.
This option lets you view the timers for calls made
and received.
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set max cost
option, you can no longer make any calls until you
reset the counter.
Notes:
• If your SIM card supports the ALS (Alternate Line
Service) feature, you must first select the
appropriate line.
• The actual time invoiced for calls by your service
provider may vary, depending on network features,
rounding-off for billing purposes and others.
Max cost: maximum cost set via the Set max cost
option.
Reset counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 162) and then press the Ok soft key.
The following timers are available:
Last call time: the length of the last call.
Set max cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 162) and then press the
Ok soft key.
Total sent: the total length of all calls made since
the timer was last reset.
Total received: the total length of all calls
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 162) and then press the Ok soft key.
received since the timer was last reset.
Reset timers: the option used to reset the call
timers. You need to enter the phone password and
then press the Ok soft key.
Call Costs (Menu 2.6)
This feature lets you view the cost of calls.
Notes:
• This feature is not intended to be used for billing
purposes.
• AOC (Advice Of Charge) information may display in
Idle Mode, depending on your SIM card or service
provider.
93
92
Sound Settings
Sound Settings
Melody: the phone rings using the melody selected
via the Melody option. See above.
You can use the Sound settings feature to
customise various settings, such as the:
Vibration: the phone vibrates but does not ring.
• ringtone, volume and type for incoming calls or
messages.
Vibration then melody: the phone first vibrates and
then starts ringing.
• sounds made when your call is connected or
when you press a key.
• quiet mode which your phone switches to when
Messages (Menu 3.2)
you hold down the
key.
This option allows you to set up the ringer for each
incoming short message and multimedia message
received.
Incoming Calls (Menu 3.1)
This option allows you to set up the ringer for
incoming calls.
Short Message (Menu 3.2.1)
Multimedia Message (Menu 3.2.2)
/
Note: If your SIM card supports the ALS (Alternate
Line Service) feature, you must select the line
you wish to change first.
The following options are available:
Tone: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
The following options are available:
Each time you select a melody from the list, it plays
the melody.
Alert type: lets you specify how you are informed
of any incoming messages.
Default melodies: allows you to select one of the
predefined melodies.
Silent: only the text notification appears; the phone
neither rings nor vibrates.
My sounds: allows you to select one of the sounds
received from other sources, such as the WAP sites,
the EasyStudio PC software or multimedia
messages.
Tone: the phone rings using the tone selected via
the Tone option. See above.
Vibration: the phone vibrates but does not ring.
Vibration then tone: the phone first vibrates and
then starts ringing.
Ring volume: allows you to adjust the ring
volume. Use the Up and Down keys or the volume
keys on the left side of the phone. The more bars
you see, the louder the volume.
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic.
Alert type: lets you specify how you are informed
of any incoming calls.
94
95
Sound Settings
Sound Settings
To adjust the key tone volume, press the volume
keys on the left side of the phone in Idle Mode with
the folder open.
Power On/Off (Menu 3.3)
This option allows you to select the melody that the
phone sounds when you switch it on or off.
You can choose either Basic or Cheerful. To turn
the sound off, select Off.
Minute Minder (Menu 3.6)
This menu option allows you to specify whether or
not the phone beeps every minute during a call to
keep you informed of the length of your call.
Connection Tone (Menu 3.4)
The following options are available:
Off: the phone does not beep.
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
On: the phone beeps every minute.
The following options are available:
Off: the phone does not beep.
Quiet Mode (Menu 3.7)
On: the phone beeps when your call is accepted.
When you hold the
key down in Idle Mode, the
phone switches to the Quiet Mode. You can specify
whether the phone vibrates or mutes when in the
Quiet Mode.
Key Tone (Menu 3.5)
This menu option allows you to select the tone that
the keypad sounds when you press a dial key.
The following options are available:
Vibration: the phone vibrates rather than rings in
the Quiet Mode.
The following options are available:
Off: the keys do not make any sound.
Mute: the phone mutes sound settings in the Quiet
Mode.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
Piano / Drum: each key, when pressed, makes a
different sound like playing the piano or the drum.
97
96
Phone Settings
Phone Settings
Many different features of your phone can be
customised to suit your preferences via the
Phone settings menu.
Display (Menu 4.2)
You can change the background image and the
colour of the components on the display according
to your preference and needs.
Wallpaper (Menu 4.2.1)
Greeting Message (Menu 4.1)
This option allows you to change the background
image to be displayed in Idle Mode.
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
The following options are available:
Animations: allows you to select one of the
animations.
When you access this menu, the current message
displays.
Photos: allows you to select one of the photos
taken by the camera.
To
Press the
Images: allows you to select one of the images in
the Images in the Media box menu that are
downloaded from the WAP sites, the EasyStudio PC
software or multimedia messages.
clear the existing
message
C key and hold it down.
enter a new
message
appropriate alphanumeric
keys.
Text position: allows you to select the position of
the text displayed on the idle screen, such as the
operator’s name, current date and time, and text
notifications of missed calls or new messages.
Choose either Top or Bottom. If you set this option
to Off, your phone displays only the wallpaper
image.
save your input
Ok soft key.
cancel your input
and return to Idle
Mode
key.
For further information on how to enter text, see
page 39.
Text style: allows you to set the style of the text
displayed on the idle screen.
Note: When you set the wallpaper image to
Calendar, the Text position and Text style
options don’t work.
98
99
Phone Settings
Phone Settings
Note: If you select the Right to left or Left to right
option, the Speed screen appears. You can set
the sliding speed by pressing the Select soft
key in the Speed screen.
Skin (Menu 4.2.2)
You can change the colour setting of the display
components, such as soft key indications area or
the menu names and icons.
Light time: allows you to set how long turn on the
light.
Backlight (Menu 4.2.3)
Service light: allows you to set the type of service
light icon. And you can turn the Service light off.
You can specify how long the phone uses the
backlight.
Select how long the backlight remains on after the
last key is pressed or the folder is open.
Language (Menu 4.3)
You can select a different language for the display
text and text input modes. The following options
are available:
LCD Brightness (Menu 4.2.4)
This option allows you to adjust the brightness of
the display screens to make them lighter or darker.
Text language: allows you to change the language
of the display text, such as menus, options or
warning messages.
1. Adjust the brightness by using the Up and Down
keys or the volume keys on the left side of the
phone.
Input mode: allows you to set the default
language to be used in the text input mode.
2. When you are satisfied, press the Ok soft key to
save the selection.
Front LCD (Menu 4.2.5)
You can select a different clock displaying type on
the Front LCD. The following options are available;
Clock sliding: allows you to change the displaying
type of the digital clock.
Right to left: The front LCD slides from right to left.
Left to right: The front LCD slides from left to right.
No sliding: The front LCD doesn’t slide.
101
100
Phone Settings
Phone Settings
Phone Lock (Menu 4.4.3)
Security (Menu 4.4)
When the Phone lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The security settings enable you to restrict the use
of your phone to the people and types of calls of
your choice.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu option on the page 103.
Various codes and passwords are used to protect
the features of your phone. For more information,
see page 161 -163.
Once the correct password has been entered, you
can use the phone until you switch it off.
PIN Check (Menu 4.4.1)
The following options are available:
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
Change Password (Menu 4.4.4)
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
Enable: you must enter the PIN each time the
phone is switched on.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
To change your PIN, see the Change PIN menu
option (page 102).
Change PIN (Menu 4.4.2)
Privacy (Menu 4.4.5)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
This feature allows you to lock or unlock the usage
of the contents, such as multimedia messages,
photos, images and sounds.
To enable or disable the Privacy feature, you must
enter your phone password.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
103
102
Phone Settings
Phone Settings
Note: Not all SIM cards have a PIN2. If your SIM card
SIM Lock (Menu 4.4.6)
does not, this menu option is not displayed.
To enable the SIM lock feature, you must enter a
new four- to eight-digit SIM lock code, and confirm
it by entering it again.
Auto Redial (Menu 4.5)
The following options are available:
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Disable: you can use any other SIM cards with
your phone.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
Note: The interval between two call attempts varies.
To unlock the SIM, enter the SIM lock code.
The following options are available:
Off: the number is not redialled.
FDN Mode (Menu 4.4.7)
On: the number is redialled automatically.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Side Key (Menu 4.6)
The following options are available:
This menu option allows you to change the function
of the volume keys on the left side of the phone
when you receive an incoming call.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
the Phonebook. You must enter your PIN2.
The following options are available:
Note: Not all SIM cards have a PIN2. If your SIM card
Reject: the incoming call is rejected when you hold
down one of the volume keys.
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option on the page 104.
Silence: the ring tone is silenced when you hold
down one of the volume keys; the call is not
rejected.
Change PIN2 (Menu 4.4.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
105
104
Phone Settings
Phone Settings
If there is no communication between your phone
and the IrDA-compliant device within 1 minute of
activating the feature, it is automatically
deactivated.
Fax Mode (Menu 4.7)
You can use your phone as a modem for faxing
when it is connected to computing devices. You
need to purchase a data kit from your local
Samsung dealer.
Reset Settings (Menu 4.9)
In this menu, you can enable the fax mode on your
phone.
This menu option allows you to reset your phone to
its default configuration. You can reset the sound
settings, phone settings or all of the settings
together.
The following options are available:
Off: you can send or receive data calls.
On: you can send or receive fax calls.
In any case you can send or receive voice calls.
1. Select one of the settings to reset by pressing
the Select soft key.
After connecting the phone to your computing
device using the data cable and set this menu to
On. Your phone works as a fax modem.
2. When a confirming message appears, press the
Yes soft key to reset settings. Then enter the
phone password and press the Ok soft key.
For further details about setting and faxing through
the phone on your computer, see the computers
user’s manual.
The password is preset to “00000000” by
default. To change it, see page 103.
Otherwise, press the No soft key.
Infrared Activation (Menu 4.8)
In this menu, you can activate or deactivate the
infrared port.
The following options are available:
Off: deactivates infrared feature on the phone.
On: activates the infrared feature on the phone.
The IrDA icon (
display.
) appears on the top line of the
107
106
Organiser
Organiser
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
The Organiser feature enables you to:
• view the calendar and/or write a memo or to do
list.
Note: You can save up to 25 items to each
category, so you can save 100 memos
totally.
• set the current date and time, and find out what
time it is in various cities around the world.
• set the alarm so that the phone rings at a specific
time.
3. Scroll to a date on the calendar by pressing the
navigation keys. Press the Select soft key.
• use your phone as a calculator, unit convertor,
timer or stopwatch.
4. If applicable depending on the category you
selected, enter the event time and press the Ok
soft key.
5. If you have selected the 12-hour time format
(see page 115), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
New Memo (Menu 5.1)
This menu option allows you to create a new memo.
Note: You can also access this menu by holding down
6. To set an alarm for the memo, press the Yes
the
C
key in Idle Mode.
soft key.
1. Write your memo of up to 100 characters and
Otherwise, press the No soft key. The memo is
saved immediately. Go to step 10.
press the Ok soft key.
For further information about how to enter text,
see page 39.
7. Enter the time for the alarm to sound and press
the Ok soft key.
2. Select the category of the memo to be saved
8. If you have selected the 12-hour time format
(see page 115), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
and press the Select soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
9. Select an alarm melody and press the Select
• To do list: tasks you need to do. They are
saved on the to do list.
soft key.
The memo is saved and then displays on the
screen.
• Call: calls you need to make.
108
109
Organiser
Organiser
10. You can choose the following option by pressing
The following options are available when you press
the Options soft key:
the Options soft key on the Calendar display:
• Add: allows you to add a new memo on the
day.
Add memo: allows you to add a new memo on the
day.
• Delete: allows you to delete the memo.
Go to date: allows you to enter a particular date
• Edit: allows you to edit the memo.
and then schedule an event on that date.
• Move: allows you to move the memo to a
different date.
View all: shows all of the events that you have
scheduled.
• Copy: allows you to copy the memo to a
different date.
Delete day: deletes the scheduled event on the
selected day.
11. When you have finished, press the
or the key to exit.
soft key
Delete all: deletes all of the events that you have
scheduled.
Creating a New Memo
Calendar (Menu 5.2)
1. Scroll to a date on the calendar, referring to
page 110, and press the Select soft key.
The calendar helps you to keep track of schedule,
calls that you need to make, tasks that you need to
do and anniversaries. You can set the alarm to ring
when the set date for a schedule is reached.
2. Write your memo and press the Ok soft key.
For further information about how to enter
characters, see page 39.
3. Select the category of the memo to be saved
Consulting the Calendar
and press the Select soft key.
To
Press the
The following categories are available:
move to another
day
Left or Right key.
• Scheduler: general schedule events, such as
appointments or meetings.
move to another
week
Up or Down key.
• To do list: tasks you need to do.
• Call: calls you need to make.
move to the
previous or next
month
Up or Down key and hold it
down
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
move to the
previous or next
year
Left or Right key and hold it
down.
4. Follow the procedure from step 4 on page 109
onwards to save the memo.
110
111
Organiser
Organiser
Viewing Your Calendar Memos
To Do List (Menu 5.3)
A date that has a memo associated with it is
highlighted in a red box. If you select a date when
events have already been scheduled, the number of
memos of each type is shown at the bottom of the
calendar.
This menu allows you to view a list of tasks.
To create a new memo of the To do list type:
1. Write the memo about your task and press the
Ok soft key.
•
•
•
•
: General schedule events
: To do list
For more information about how to enter
characters, see page 39.
: Calls
2. Scroll to a date on the calendar, referring to
: Anniversaries
page 110, and press the Select soft key.
Press the Select soft key to view the memos.
3. Follow step 4 on page 109 onwards to save the
memo.
If you have created more than one memo on the
same day, you can scroll to the event you want to
view by pressing the Left or Right key.
Once you have defined tasks, they are listed with a
status mark (
for Done or
for Undo) within
The following options are available when you press
the Options soft key:
the To do list menu.
To scroll to a specific task, press the Up or Down
key and press the Select soft key. The task displays
with the deadline, alarm setting, job details and
status mark.
Add: allows you to add a new memo. For further
information about how to add a memo, see
page 108.
Delete: allows you to delete the memo.
You can scroll to the previous or next task by
pressing the Left or Right key.
Edit: allows you to edit the memo.
The following options are available when you press
the Options soft key:
Move: allows you to move the memo to a different
date.
Add: allows you to add a new task. For details
about adding To do list-type memos, see page 108.
Copy: allows you to copy the memo to a different
date.
Mark: allows you to change the status mark.
Edit: allows you to edit the contents of the task.
Move: allows you to move the task to a different
date.
112
113
Organiser
Organiser
Copy: allows you to copy the task to a different
To select your time zone:
date.
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
Delete: allows you to delete the task.
Delete all: allows you to delete all of tasks from
the list.
The local date and time display.
2. Press the Set soft key.
Clock (Menu 5.4)
3. To
Select
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
update the current Set local.
date/time with this
new setting
indicate that the
time zone is
Set DST. The
shown next to the time
icon is
The following options are available:
currently using the difference.
daylight saving
time
Set time: allows you to enter the current time. You
can choose the time format in the Set format
menu option; see page 115.
indicate that the
time zone is no
longer using the
daylight saving
time
Remove DST (only
Note: Before setting the time, you must specify your
available when the
icon is shown next to the
time difference).
time zone in the Set world time menu option.
Set date: allows you to enter the day, month and
year. You can change the date format in the Set
format menu option; see page 115.
4. When you have finished, press the
the key to exit.
soft key or
Set world time: allows you to check the current
time in GMT and 21 major cities around the world.
Scroll through the cities using the Left or Right key.
Set format: allows you to change the time and
date formats.
Time format: 24 hours
12 hours
The screen shows the:
• city name.
Date format: DD/MM/YYYY (day/month/year)
YYYY/MM/DD (year/month/day)
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see
below) or GMT (by default).
114
115
Organiser
Organiser
5. Repeat step 4 to change each setting.
6. When you have finished, press the
Alarm (Menu 5.5)
soft key or
This option allows you to set an alarm to ring at a
specific time. You can set up to three alarms or set
the phone to ring an alarm when it is switched off.
the
key to exit.
Once an alarm has been set, you can see the Alarm
icon ( ) on the top line of the display. To stop the
alarm when it rings, open and close the phone or
press any key.
To set an alarm:
1. Select either Morning call, Alarm1 or Alarm2
by pressing the Up or Down key.
Note: When the Quiet Mode is activated, the alarm
tone doesn’t sound. But When you set an
Morning call, it sounds the alarm tone even if
the Quiet Mode is activated.
The
set. The
icon means that no alarm is currently
icon means that an alarm has
already been set.
To set the alarm to ring even if your phone is
switched off:
2. Press the Select soft key.
3. Press the Options soft key.
1. Scroll to Auto power on the Alarm list and
press the Select soft key.
4. Scroll to an option by pressing the Up or Down
key and press the Select soft key. Change the
setting, as needed.
2. If necessary, press the Up or Down key to select
On.
• Alarm day: place or remove a check mark on
the day(s) of the week by pressing the Select
soft key. If you want to set a daily alarm,
select Everyday. If you want to set a
To turn the Auto Power feature off, select Off.
3. Press the Select soft key to save the setting.
temporary alarm, select Once alarm. When
you press the Ok soft key after selecting, your
phone asks you to enter the alarm time.
4. When you have finished, press the
the key to exit.
soft key or
Once you have activated the auto power alarm, a
check mark appears ahead of Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and rings the alarm. It
then automatically switches off again.
• Alarm time: enter the time for the alarm to
sound.
• Alarm tone: select an alarm melody.
• Remove alarm: deactivates the alarm.
Note: The alert type of Alarm1 and 2 is affected by
the alert type of incomming call. Morning call’s
alert type is always melody.
116
117
Organiser
Organiser
Calculator (Menu 5.6)
Conversion (Menu 5.7)
You can use the phone as a calculator. The
calculator performs basic arithmetic functions, such
as addition, subtraction, multiplication, division and
remainder computation.
This menu option allows you to convert from one
type of unit to another.
To convert a value:
1. Scroll to the type of conversion to be performed
from Currency, Length, Weight, Volume,
Area and Temperature, and press the Select
soft key.
To perform a calculation:
1. Enter the first number using the number keys.
Note: To erase any mistakes or clear the display,
press the
C
key.
2. Enter the value to be converted and press the
Down key to move to the From field.
2. Press the
key to enter a decimal point (.) or
the key to enter the appropriate arithmetic
You can enter a decimal point (.) using the
key.
symbol: + (add), - (subtract),
(multiply), /
(divide), % (remainder), ( or ).
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.
3. Enter the second figure.
4. Repeat steps 2 and 3, if necessary.
Refer to the table on the following page for the
units available.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
4. Select the required unit by pressing the Left or
Right key.
Note: The result is rounded to six decimal places.
5. Press the Ok soft key or the
key to view the
6. When you have finished, press the
the key to exit.
soft key or
result.
The result appears in the Answer box.
6. When you have finished, press the
the key to exit.
soft key or
118
119
Organiser
Organiser
Even if you exit the Timer screen, the timer will
Units Available
continue running. After the specified time has
expired, the phone informs you by playing a melody
and displaying a text notification.
Type
Units
Currency
EUR
FRF
ATS
PTE
LUF
DEM
ESP
BEF
ITL
NLG
FIM
To stop the timer melody when it rings, open and
close the phone or press any key.
GRD IEP
To stop the timer before the end, press the Stop
soft key on the Timer screen.
Length
mm
km
cm
in
m
ft
Notes
:
• The timer uses power from the battery consequently,
the phone’s operating time is reduced.
• When the Quiet Mode is activated, there is no sound.
yard mile
kg
Weight
Volume
g
ton
grain oz
3
pound
3
cm
m
l
Stopwatch (Menu 5.9)
3
3
3
in
ft
yd
gal
The stopwatch can be used to measure times for
various sports.
2
2
Area
cm
m
a
2
2
2
in
ft
yd
Example: Running or swimming races
Up to four stopwatches can be used.
acre
°C
Temperature
°F
The precision of the stopwatch is one hundredth of
a second. The maximum measurement time is 10
hours.
Timer (Menu 5.8)
1. To start the stopwatches, press the Ok soft key.
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
2. When you wish to stop the first stopwatch, press
the Ok soft key. Repeat this step for the other
stopwatches.
1. Press the Set soft key.
3. Press the Reset soft key to reset the watches.
2. Enter the length of time you want to count down
in hours and minutes and press the Ok soft key.
4. Press the C or
key to exit.
3. Press the Start soft key to start counting down.
120
121
Network Services
Network Services
• Voice calls only
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you wish.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Example: You can:
• systematically divert fax calls to your
office fax machine.
Call Diverting (Menu 6.1)
• divert voice calls to your colleague if
you are already using the phone.
Note: The call divert options may be different
depending on your SIM card and those not
supported by your network operator may not
be shown.
Setting Call Diverting Options
This network service enables incoming calls to be
rerouted to the number that you specify.
1. Select the type of call diverting by pressing the
Up or Down key and then press the Select soft
key.
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
2. Select the type of calls to be diverted by
pressing the Up or Down key and then press the
Select soft key.
Call diverting can be set up in the following ways:
Divert always: all calls are diverted.
3. Press the Activate soft key to confirm your
settings.
Busy: calls are diverted if your phone is engaged
on another call.
4. Enter the number to which the calls are to be
diverted.
No reply: calls are diverted if you do not answer
the phone.
To enter an international code, hold down the 0
key until the + sign displays.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
You can also select a number in the Phonebook
or the voice mail server number, by pressing the
Options soft key, followed by Phonebook or
Voice server.
Cancel all: all call diverting options are
deactivated.
You can specify individual call diverting options for
each of the following call types:
5. When you are satisfied, press the Ok soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
122
123
Network Services
Network Services
Cancel all: all call barring options are deactivated;
calls can be made and received normally.
Deactivating Specific Call Diverting
Options
Change barring password: allows you to change
barring password.
1. Select the call diverting option to be
deactivated.
You can specify individual call barring options for
each of the following call types:
2. Select the type of calls to which this option
applies.
• Voice calls only
3. Press the Remove soft key.
• Fax calls only (not available when line 2 is in use)
The phone sends your settings to the network
and the network’s acknowledgement displays.
• Data calls only (not available when line 2 is in
use)
You can also deactivate all call diverting options by
selecting the Cancel all option.
Setting Call Barring Options
1. Select the type of call barring by pressing the Up
or Down key and then press the Select soft key.
Call Barring (Menu 6.2)
2. Select the type of calls to be barred by pressing
the Up or Down key and then press the Select
soft key.
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
International: international calls cannot be made.
your service provider and press the Ok soft key.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that is
the country where your home network provider is
located.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Deactivating Specific Call Barring
Options
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
124
125
Network Services
Network Services
3. Press the Deactivate soft key.
Call Waiting (Menu 6.3)
4. Enter your call barring password supplied by
your service provider.
This network service informs you when someone is
trying to reach you during another call.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
You can also deactivate all call barring options by
selecting the Cancel all option.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Changing the Barring Password
You can set and change the call barring password
obtained from your service provider.
Activating the Call Waiting Feature
1. Select Change barring password from the
Call barring screen, and press the Select soft
key.
1. Select the type of calls to which the call waiting
option is to be applied by pressing the Up or
Down key and then press the Select soft key.
2. Enter the current password and press the Ok
2. Press the Activate soft key to confirm your
soft key.
settings.
The phone sends your settings to the network
and the network’s acknowledgement displays.
3. Enter a new password and press the Ok soft
key.
4. Enter the new password again to confirm it and
Deactivating Specific Call Waiting
Options
press the Ok soft key.
1. Select the type of call to which the option
applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call waiting options by
selecting the Cancel all option.
126
127
Network Services
Network Services
Network Selection (Menu 6.4)
Caller ID (Menu 6.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
The Network selection feature enables you to
automatically or manually select the network used
when roaming outside your home area.
Note: Some networks do not allow the user to change
this setting.
Note: You can select a network other than your home
network only if it has a valid roaming
The following options are available:
agreement with your home network.
Default: the default setting provided by the
network is used.
To indicate to automatically or manually select the
network when roaming:
Hide number: your number does not display on
the other person’s phone.
1. Press the Up or Down key until the appropriate
option highlights and press the Select soft key.
Send number: your number is sent each time you
make a call.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 2.
Active Line (Menu 6.6)
2. Press the Up or Down key until the preferred
network highlights and press the Select soft
key.
Some SIM cards may be used with two subscriber
numbers. This functions is available only if your SIM
card supports it.
You are connected to that network when
roaming.
This menu option allows you to select the line to be
used to make calls. However, calls can be answered
on both lines, regardless of the selected line.
128
129
Fun Box
Fun Box
The Fun box menu contains several fun options:
Note: To quickly launch the WAP browser from Idle
Mode, press the key.
• WWW services
• Media box
• JAVA world
• Games
To scroll through the screen, use the Up and Down
keys.
To exit the browser, press the
key at any
time. The phone returns to Idle Mode.
Navigating the WAP Browser
WWW Services (Menu 7.1)
To
Press the
Your phone comes equipped with a WAP (Wireless
Application Protocol) Browser, making it possible for
you to access the Wireless Web.
scroll through and Up or Down key until the item
select browser
items
you want highlights, and then
press the soft key.
Each time you start the WAP Browser, the phone
connects to the Wireless Web and the service
select a numbered corresponding numeric key.
item
indicator icon (
or
) appears on the display to
inform you that you are connected to the Wireless
Web and will be billed accordingly. Rates vary
according to your service option.
return to the
previous page
(or Back) soft key or C
key.
return to the
key and select the Home
The WAP Browser ends the network connection
after a certain period of inactivity and automatically
reconnects as necessary. For this reason, you may
find that you are billed for several network
connections within a single session. This is normal
and is designed to minimise your bill.
startup homepage browser option. For details,
see page 132.
Entering Text in the WAP Browser
When you are prompted to enter text, the current
text input mode appears above the right soft key.
Home (Menu 7.1.1)
For further information on how to enter text, see
page 39.
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
Once connected, the homepage displays. The
content depends on the service provider.
130
131
Fun Box
Fun Box
Using the WAP Browser Menus
Using the WAP Browser Options
There are various menu options available when
surfing the Wireless Web.
Several options are available when you are surfing
the Wireless Web. To access these options, press
the
key once connected to the Wireless Web.
To access the WAP Browser menu:
Goto URL: allows you to manually enter the URL
address of the site that you wish to access.
1. Press the
key or scroll to the logo on the top
soft
left of all WAP pages and then press the
key.
Bookmark: allows you to use the Bookmark
menu option. For details, see page 133.
A list of options appears.
Messages: allows you to read or write an SMS
message. For details, see page 66.
2. Highlight the required option using the Up or
Down key.
Media box: allows you to use your Media box. For
details, see page 137.
3. Press the
soft key to select the option.
4. If necessary, select the secondary option by
pressing the Up or Down key and then press the
soft key.
Answering a Call During a WAP Connection
You can receive an incoming call while you are
navigating the WAP browser.
Note: The WAP Browser menus may vary,
depending on your version of the browser.
Answer the call by pressing the
key, as you
normally would. After ending the call, you can
continue navigating on the WAP page you were
previously accessing.
The following WAP Browser menus are available:
Back: returns to the previous page.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Bookmark (Menu 7.1.2)
Exit: exits the WAP browser.
This menu option allows you to store the URL
addresses of up to 10 of your favourite Web sites.
Reload: reloads the current page.
Show URL: shows the URL address of the WAP
page you are currently accessing.
To store a URL address:
1. Select an empty location and press the Select
Advanced: the following options are available:
soft key.
Clear cache: clears the information stored in the
cache the phone’s temporary memory used to store
the most recently accessed WAP pages.
2. Enter the address and press the Ok soft key to
save it.
About: shows browser information.
132
133
Fun Box
Fun Box
3. Enter the name of the bookmark and press the
For each proxy, the following options are available:
Ok soft key.
Proxy name: enter the name of the HTTP proxy
For further information about how to enter text,
see page 39.
server.
GSM setting: you can change the proxy settings
Once you have stored an address, the following
options are available when you select it.
for the GSM network.
Gateway: enter the IP Address and IP Port
Go: allows you to access the site directly.
Data call type: select a network connection type;
ISDN or Analogue.
Edit: allows you to change the name and URL
address of the bookmark.
Dial number: enter the PPP server phone number.
Login ID: enter the PPP server login ID.
Delete: allows you to delete the bookmark.
Password: enter the PPP server password.
Go to URL (Menu 7.1.3)
GPRS setting: you can change the proxy settings
This menu option allows you to manually enter the
URL address of the Web site that you wish to
access.
for the GPRS network.
Gateway: enter the IP Address and IP Port.
APN: enter the access point name used for the
address of the GPRS network gateway.
Enter the URL address and press the Ok soft key.
For further information about how to enter text, see
page 39.
Login ID: enter the user ID required to connect to
the GPRS network.
Password: enter the password required to connect
to the GPRS network.
Clear Cache (Menu 7.1.4)
This menu option allows you to clear the
information stored in the cache, the phone’s
temporary memory used to store the most recently
accessed WAP pages.
Home URL: you can change the address of your
startup homepage.
When the default homepage displays, you can
delete it using the C key and enter your own choice.
To enter any special characters, / for example, use
the Symbolic mode; see page 45.
Proxy Settings (Menu 7.1.5)
This menu option allows you to set up five proxy
servers.
Bearer: you can select the bearer to be used for
each type of network accesses.
Note: You do not need to change the browser settings
in most cases. Change the settings only when
your network provider asks you to.
134
135
Fun Box
Fun Box
GPRS first: your phone will search for the GPRS
network first. If this service is not available, you
can set the GSM service temporarily.
Media box (Menu 7.2)
This menu option stores various media items from
other sources, such as the WAP sites, the
EasyStudio PC software or multimedia messages.
GPRS only: the phone only works in GPRS
networks.
GSM only: the phone only works in GSM networks.
Photos (Menu 7.2.1)
This option allows you to view the taken pictures.
Current proxy (Menu 7.1.6)
My photos: allow you to view the photos in my
photos.
This menu option allows you to activate one of the
proxies you set up to use the WAP connection.
My album1 / My album 2: allow you to view the
photos in the selected album.
Push messages (Menu 7.1.7)
When you view a photo, press the Options soft key
This menu allows you to set to be received and read
push messages.
to do the followings.
Send: allows you to send it via a message.
Rename: allows you to rename it.
Delete: allows you to delete it.
The following options are available:
Inbox: Your phone receives push messages and
saves them in the Inbox. And you can read push
messages in the Inbox.
Move to album: allows you to move it to one of
the albums.
Setting: This option allows you to set the push
message receiving options.
Set as wallpaper: allows you to set it as a
wallpaper.
Always: always push message comes in.
Never: the push message never comes in.
Protection: allows you to protect it from deletion
or not.
Optional: Only the push messages whose setting
matches to the number in this option come in. The
preset number is SMS service centre. You can also
edit the number.
Properties: allows you to view the detail
information of the photo.
Images (Menu 7.2.2)
Delete all: deletes all of the push messages.
This option allows you to view the images received
from other sources, such as the WAP sites, the
EasyStudio PC software or multimedia messages.
136
137
Fun Box
Fun Box
When you view an image, press the Options soft
key to send, rename, delete, set as a wallpaper or
view the properties.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
For further details about these options, see the
options of the Photos menu (Menu 7.2.1).
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
Sounds (Menu 7.2.3)
This option allows you to listen to the recorded
voices and the melodies received from other
sources, such as the WAP sites, the EasyStudio PC
software or multimedia messages.
Otherwise, press the No soft key.
Images (Menu 7.2.4.2)
When a confirming message appears, press the Yes
soft key to delete all of the images.
Voices: allow you to listen to the recorded voices.
Otherwise, press the No soft key.
My sounds: allow you to listen to various melodies.
Sounds (Menu 7.2.4.3)
When you select a sound, press the Options soft
key to send, rename, delete, set as a ringtone (only
in My sounds) or view the properties.
1. Scroll to a sound box and place a check mark
ahead it by pressing the Select soft key.
For further details about these options, see the
options of the Photos menu (Menu 7.2.1).
Selecting All places check marks on all of the
boxes.
2. If necessary, repeat step 1 to check another
box.
Delete All (Menu 7.2.4)
This option deletes all of the photos, images and
sounds in the Media box.
3. When you have finished checking, press the Ok
soft key.
Photos (Menu 7.2.4.1)
4. When a confirming message appears, press the
Yes soft key to delete all of the sounds in the
box(es).
1. Scroll to a box and place a check mark ahead it
by pressing the Select soft key.
Selecting All places check marks on all of the
boxes. If you want to delete the protected
photos, select the With protected photos
option.
Otherwise, press the No soft key
138
139
Fun Box
Fun Box
Memory Status (Menu 7.2.5)
SnowBallFight
The goal of this game is to challenge and defeat the
snowball fight champions of four different teams.
Media box, Camera and multimedia message boxes
share a given amount of memory in your phone.
Accessing a game
The display shows the status of free and used
memory.
After loading the game, press any key twice to go
to the first menu screen. At the first menu screen,
You can see the used memory status of Media box,
Camera and multimedia message boxes by pressing
the Left or Right key.
press
key to play a game, or press
key to
access the main menu of this game.
Play: allows you to start a new game or a saved
game. Saved game allows you to continue the
beginning of last stage you played.
JAVA World (Menu 7.3)
Instructions: shows you the explanation of control
keys, offense items and defense items.
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
Configuration: allows you to turn the sound,
vibration on or off and select the game speed from
1 to 5.
Downloads: A list of Java games is displayed. In
basic, two pre-loaded MIDlets (Java games) are
provided. If the list of Java games is empty, a pop
up message is displayed to invite to download a
new game. To add MIDlets to the list, you can
download MIDlets from the WAP sites.
Quit: quits the game and returns to the downloads
menu screen.
Playing a game
Move the character along the street using the
navigation key. If you have enough gold coins which
you can earn while fighting to buy items, you can
buy defense items at the drug store and offense
items at the item shop. Move the character to the
To
Press the
find a game
run a game
Up or Down key.
Launch soft key.
Info soft key.
team of current stage and press
key to select it.
When the snowball fight game starts, hit the rival
kids with snowballs and avoid theirs. While fighting
you can use items you have. If you raise enough
mana, you can also use special attack. You should
win all fights in four stages in order to challenge the
champions of the snowball fight.
view detail
information
delete the game
Delete soft key in the
information display.
140
141
Fun Box
Fun Box
Key Commands
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
4/6 or Left/Right: move left or right
2, 5 or Up, :control the distance at the first press
and throw the snowball at the next press.
High score: shows you the high score table.
How to play: shows you the instruction of this
game.
8 or Down: use the special attack depending on
your mana
Option: allows you to set the sound on or off
3: enters item mode to use your item, select the
item you want to use by pressing 2, 5, Up or
key.
Playing a game
Special attacks
Your score goes up when you remove the bubbles.
Only when more than 3 same coloured bubbles line
up horizontally or diagonally, they disappear. To line
up the bubbles, move the band rounding three
bubbles to suitable place and rotate it. When the
game is over, your score is ranked on the high score
board if it is within third.
Level 1: Aurora, all enemies are hit by a snowball.
Level 2: Ice dragon, all enemies are hit by a
snowball and frozen for 8 seconds.
Level 3: Icicle storm, double powered snowball
attack to all enemies and decreasing enemies’
attack accuracy for 10 seconds.
Key Commands
2, 4, 6, 8, or navigation key: move the band up,
down, left or right
BubbleSmile
BubbleSmile is a arcade puzzle game.
Accessing a game
1: rotate the bubbles in the band counterclockwise
3: rotate the bubbles in the band clockwise
After loading the game, you will see the following
DNS setting: The DNS (Domain Name Server)
address to connect the Java server is automatically
set when making data call set up. The address is
provided by the network operator automatically, but
you can change it manually at this menu.
options, press
key to select one of them:
Start game: allows you to start a new game with
timed mode or skilled mode.
• Timed mode: you have to achieve the best score
before gauge disappear at the time bar. When
you get the same coloured bubble together,
gauge at the time bar increases.
Memory status: You can check the free space for
Java download.
The display also shows the total memory and used
memory.
• Skilled mode: you have to make more than 4
bubbles disappear at once for the gauge at the
skill bar increase. If 3 or none of bubbles
disappear, then the gauge decreases.
142
143
Fun Box
Fun Box
Games (Menu 7.4)
Honey ball (Menu 7.4.1)
The goal of the game is to break honey blocks by
bouncing a ball between a bat and the honey
blocks.
Using this menu option, you can also enjoy playing
three games.
Scroll to the required game by pressing the Up or
When you start a new game, the ball is sitting on
the bat in the middle of the screen. Once you start
the ball moving, you must position the bat, so that
the ball continues to bounce off it. Each time the
ball hits a honey block, the block breaks,
sometimes revealing letters that enhance the
efficiency of the bat or ball:
Down key and press the Select soft key.
To select an option, press the corresponding
number key. The following options are available:
New Game: allows you to start a new game.
High Score: shows you the High Score table. Not
all games have this option.
B: the bat and ball change back to their standard
form.
Key Info: shows you which keys do what within
the game.
C: the ball sticks to the bat each time it hits it,
giving you time to optimise your position.
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
H: the bat increases in length.
P: the ball is changed into a power ball, so that it
no longer bounces off the blocks. It goes straight
through them, destroying anything that it touches.
While you are playing a game:
To
Press the
If you reach the final stage of the game, the rules
are slightly different. The honey blocks are much
stronger and need to be hit more than once before
they are destroyed. At the same time, small bees
attack the bat, damaging it a little each time until it
is destroyed and you lose a life.
adjust the game
volume
volume keys.
pause/resume the C key.
game
exit the game
key or right soft key.
Key Commands
3: slope up.
At the end of the game, if your score is ranked fifth
or higher, you may enter a name of up to 10
characters.
1: slope down.
4, Left: move left
6, Right: move right
9, 5 or
: hit the ball
: turn the sound on or off
144
145
Fun Box
Fun Box
Go! Hamster (Menu 7.4.2)
Bowling (Menu 7.4.3)
Go! Hamster is an arcade board game. It requires
patience and discretion. The aim is to remove about
80% of the background while avoiding the
mushroom bombs in order to progress to the next
stage.
The goal of the game is to knock down a triangular
group of ten pins by rolling a ball.
When you start a new game, you can select the
required mode, character and ball by pressing the
right soft key.
When the start screen appears, press any key to
start the game.
When the game starts, the screen shows the
character and ball. Move the character first, then
select the spin and direction, and finally set the
power of the ball.
Key Commands
2, Up: move up
Key Commands
4, Left: move left
6, Right: move right
4, Left: move left
6, Right: move right
8, Down: move down
5: stop
5,
: set the speed or spin or throw the ball
: turn the sound on or off
: turn the sound on or off
146
147
Camera
Camera
3. Press the Capture soft key or the Camera (
)
key on the right side of the phone to take a
picture.
Using the camera module embedded in your phone,
you can take pictures for people or events while on
the move. Additionally, you can send photos to
other people in a picture message or as an e-mail
attachment. The camera produces JPEG pictures.
The picture is automatically saved in the My
photos menu (Menu 8.2).
4.
To
Press the
use the options
Options soft key.
For details about the
options, see below.
Take Photos (Menu 8.1)
This menu allows you to take a picture to send the
photo as a picture message to other destinations.
You can use the picture as a background and store
it separately in My album folder.
delete the picture file
Delete soft key.
return to the capture
mode to take another
picture.
C key.
Taking a Picture with the Folder Open
turn the camera off
and return to Idle Mode
key.
1. To access this menu, press the Select soft key
when Take photos highlights. Or, press the
Down key in Idle Mode.
When you press the Options soft key in step 4, the
following options are available. Scroll the option you
want by pressing the Up and Down keys and press
the Select soft key:
To take pictures immediately in Idle Mode, long
press the Camera ( ) key on the right side of
the phone or long press the Down key.
Send: allows you to send a multimedia message
using the taken picture. For further details about
sending multimedia messages, see page 76.
The image to be captured appears on the
display.
The icons on the top line of the display indicate
the current mode, brightness, size and quality.
Rename: allows you to rename the taken picture.
Go to my photos: allows you to see the taken
pictures in the My photos (Menu 8.2).
2. Adjust the image by aiming the camera to the
subject.
Set as wallpaper: allows you to use the image as
the background image.
Use the Left and Right keys to adjust the
brightness of the picture.
The Up, Down and volume keys zoom in and out
the image.
You can set the camera options. See page 150.
148
149
Camera
Camera
frame format you want to use. You can preview the
image with the frame format by using the Preview
soft key. The picture size set to Mobile(128*120)
automatically, and Frame mode is not allowed in
Self shot.
Protection: allows you to protect the taken picture
from deletion or not.
Properties: this option shows you information
about the picture, such as name, size, date,
resolution, protection type and format.
Effects: this options allows you to apply special
effects to the picture. Press the Up or Down key to
find the tone you want to use. Gray, Negative,
Sepia, Emboss, Sketch are available. To
deactivate the effect setting, select Off.
Using the Camera options
When you press the Options soft key in the
capture mode, the following options are available
for the current shot:
Rotation: this option allows you to flip the image
Mode: You can take a picture in various modes.
Once you change the mode, its indicator appears at
the top left on the display.
vertically or reverse it as a mirror image.
Timer: you can select the delay time for all modes.
In Self shot mode, captures by the Capture soft
key or the Camera ( ) key on the right side of the
phone. In another modes, captures by the Left soft
key. When you press the capture key, the phone
takes the picture after the specified time. When you
exit the camera mode or select Off in the Timer
menu, the timer is off.
Normal shot: you can take a picture in the normal
mode.
Self shot: this mode allows you to take a picture
using the external display. Press the Camera (
)
key on the right side of the phone after adjusting
the image, and the phone takes and saves the
picture. After you take a self shot, press the
Review soft key to review the taken picture.
Settings: this option allows you to change the
options for taking a picture. And this option is
synchronized with the Settings menu (Menu 8.5).
Multi-shot: you can take action stills. Select speed
and the number of pictures you want to take. When
Photo size: sets the image size to one of
you press the Capture soft key or the Camera (
key on the right side of the phone, the phone
automatically takes and saves the pictures
successively as many times as you set. A picture
size set to Mobile(128*120) automatically.
)
VGA(640*480), QVGA(320*240),
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
Photo quality: allows you to select the image quality
from Superfine, Fine, Normal, and Economy.
The option you select appears on the top of the
display.
Night mode: this option allows you to take a picture
of the best quality when it is dark.
Capture only: you can take pictures without review.
Frame: this option allows you to use a frame on
the picture. Press the navigation key to find the
150
151
Camera
Camera
Shutter sound: allows you to select a sound when
you press the shutter, the Capture soft key or
Camera ( ) key on the right side of the phone.
My Photos (Menu 8.2)
In this menu, you can review the pictures you have
taken.
Default name: allows you to change the default
prefix of the picture name.
To
Press the
Help: this options shows you the functions of the
navigation keys and the volume keys in the capture
mode.
scroll through the
pictures
navigation keys.
show the selected picture View soft key.
as an enlargement
Taking a Picture with the Folder Closed
go back to the multiple
view mode
Multi soft key.
1. Close the folder.
use the options
Options soft key.
For details, see
page 149.
2. To turn the camera on, press and hold the
Camera ( ) key on the right side of the phone.
The image to be captured appears on the
display. The volume keys zoom in or out the
image.
turn the camera off
and return to Idle Mode
key.
3. Press the Camera ( ) key on the right side of
the phone to take the picture.
My Albums (Menu 8.3)
The picture is automatically saved in the My
photos menu (Menu 8.2).
My Album allows you to store the pictures as your
photo album. Select one of albums. It shows the
pictures saved in the album. For details about
viewing your pictures and using them, see
page 153.
4. To review the taken picture, open the folder and
press the No soft key. You can delete the picture
by pressing the Delete soft key, return to the
self shot mode by pressing the Preview soft
key.
To exit the camera mode, open the folder and
press the Yes soft key or close the folder.
152
153
Camera
Camera
Photo quality: allows you to select the image
Delete All (Menu 8.4)
quality from Superfine, Fine, Normal, and
Economy. The option you select appears on the top
of the display.
You can delete all the photos saved in each
category.
Shutter sound: allows you to select a sound when
you press the shutter, the Capture soft key or
Camera ( ) key on the right side of the phone.
1. Scroll to a photo box and place a check mark
ahead it by pressing the Select soft key.
Selecting All places check marks on all of the
photo boxes. If you want to delete the protected
photos, select the With protected photos
option.
Default name: allows you to change the default
prefix of the picture name.
2. If necessary, repeat step 1 to check another
box.
Memory Status (Menu 8.6)
Camera, Media box and multimedia message boxes
share a given amount of memory in your phone.
3. When you have finished checking, press the Ok
soft key.
The display shows the status of free and used
memory.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
You can see the used memory status of Camera,
Media box and multimedia message boxes by
pressing the Left or Right key.
Otherwise, press the No soft key.
Settings (Menu 8.5)
This menu option allows you to change the default
settings of the options for using the camera feature.
The following options are available:
Photo size: sets the image size to one of
VGA(640*480), QVGA(320*240),
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
154
155
Using ALS (Alternate Line Service)
Using ALS (Alternate
Line Service)
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make
and receive calls on either line. If you subscribe to
this network service, a few additional menu options
enable you to set up this feature.
Setting Call Diverting Options
You can set up call diverting via the Call diverting
menu option (Menu 6.1). This service reroutes
incoming calls on the line of your choice to a
specified number. For further details, see page 122.
Viewing Call Information
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
You can view call times and last call cost
information for each line. For further details, see
page 92.
Selecting a Line
You can select a line for each call via the Active
line menu option (Menu 6.6). For further details,
refer to page 129.
Editing the Line Name
You can edit the name of each line via the Own
number menu option.
When you edit the name of a line, this name
replaces “Line 1” or “Line 2”, as applicable. For
further details, refer to page 63.
Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each
line via the Incoming calls menu option (Menu
3.1). For further details, see page 94.
156
157
Solving Problems
Solving Problems
“No service” displays
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded
by buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
When you switch your phone on, the
following messages may appear
No SIM card
Check that the SIM card is correctly installed.
You have entered a number but it was
not dialled
Phone locked Enter password
• Have you pressed the
key?
The Phone lock feature is enabled. You must enter
the phone’s password before you can use the
phone.
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Enter PIN
Your correspondent cannot reach you
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
• The PIN check feature is enabled. Every time the
phone is switched on, you must enter the PIN. To
disable this feature, use the PIN check menu
option (Menu 4.4.1). See page 102.
Your correspondent cannot hear you
speaking
Enter PUK
• Have you switched off the microphone (Mute
appears)?
The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
158
159
Solving Problems
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
The phone starts beeping and “Battery
Low” flashes on the display
The battery is insufficiently charged. Replace the
battery and recharge it.
Some access codes can be changed using the
Security menu option (Menu 4.4). See page 102
for further details.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
Phone Password
The Phone lock feature (see page 103) uses the
phone password to protect your phone against
unauthorised use.
No number is dialled when you recall a
Phonebook entry
The phone password is supplied with the phone and
is preset to “00000000” at the factory. To change
the password, use the Change password menu
option (Menu 4.4.4). See page 103.
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
PIN
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. It is
usually supplied with the SIM card. When the PIN
Check feature is enabled (see page 102), you must
enter the PIN each time you switch on the phone.
Then contact your local dealer or Samsung
after-sales service.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the Ok soft
key to unlock the phone. Key in a new PIN and
press the Ok soft key. Key in the new PIN again and
press the Ok soft key.
160
161
Access Codes
Access Codes
PIN2
Call Barring Password
The PIN2, supplied with some SIM cards, is required
to access some functions, such as charging unit
counters. These functions are only available if
supported by your SIM card.
The 4-digit call barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the Ok soft
key to unlock the phone. Key in a new PIN2 and
press the Ok soft key. Key in the new PIN2 again
and press the Ok soft key.
You can change this password using the Change
barring password menu option (Menu 6.2.7).
For further details, see page 126.
PUK
The PUK (PIN Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the
SIM card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You cannot change the PUK. If you lose the code,
contact your service provider.
PUK2
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
You cannot change the PUK2. If you lose the code,
contact your service provider.
162
163
Health and Safety Information
Health and Safety
Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
Exposure to Radio-Frequency Energy
(SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
Before a new model phone is available for sale to
the public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
• Use the battery only for its intended purpose.
*
the EU Council is 2.0W/kg.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
The Hightest SAR Value for this model phone was
0.733 W/kg.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
164
165
Health and Safety Information
Health and Safety Information
• If left unused, a fully charged battery will
discharge itself over time.
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
166
167
Health and Safety Information
Health and Safety Information
Other Medical Devices
Electronic Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
recommendations of Wireless Technology Research.
Persons with pacemakers:
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
• should not carry the phone in a breast pocket
• should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
168
169
Health and Safety Information
Health and Safety Information
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
170
171
Health and Safety Information
Health and Safety Information
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
Care and Maintenance
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
172
173
Glossary
Glossary
EMS (Enhanced Message Service)
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions.
Network service sending and receiving messages
that include images, sounds and animations to and
from another user without having to speak to the
correspondent.
ALS (Alternate Line Service)
GPRS (General Packet Radio Service)
Capability of associating two lines with one SIM
card. With this service, you can make and receive
calls on either line, as required.
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
GSM (Global System for Mobile
Communication)
Call Holding
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
IrDA (Infrared Data Association)
Ability to inform users that they have an incoming
call when engaged on another call.
A standard defined by the IrDA consortium. It
specifies a way to wirelessly transfer data via
infrared radiation. The IrDA specifications include
standards for both the physical devices and the
protocols they use to communicate with each other.
CLI (Caller Line Identification) Services
Services allowing subscribers to view or block the
telephone numbers of callers.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
174
175
Glossary
Glossary
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
Multiparty Calling
Ability to establish a conference call involving up to
five additional parties.
SMS (Short Message Service)
PIN (Personal Identification Number)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
Soft Keys
PUK (PIN Unblocking Key)
Two keys marked
purpose of which:
and
on the phone, the
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
176
177
Index
Index
Earpiece volume • 30
Emergency calls • 170
External display • 16
settings • 99
Length of calls • 92
Letters
entering • 39
Locking
phone • 103
SIM card • 104
Low battery indicator • 22
,
97
holding • 32
international • 27
log • 27
A
ABC mode • 39
,
43
Access codes • 161
making • 26
F
Accessories •
Active line
9
missed • 28 90
,
FDN mode • 104
Fixed Dial Number mode •
104
Fun box • 130
Functions, select • 24
multi-party • 35
received • 90
records • 90
select • 129
service, use • 156
Alarm, set • 116
Alert type • 95
ALS • 156
Auto redial, set • 105
Autopower alarm • 117
redialling • 27
M
automatically • 105
Maintenance • 172
Media box • 137
Memory status, phonebook •
65
rejecting • 29
ring tone • 94
G
searching for a number
in phonebook • 53
times • 92
Games • 144
Bowling • 147
Memos
B
Go! Hamster • 146
Honey Ball • 145
Greeting message • 98
Group settings • 64
making • 108
,
111
waiting • 33
,
127
background image, set • 99
viewing 112
Menu
list • 47
scrolling • 46
Messages
Card, SIM
Backlight • 17
,
98
dialling numbers • 59
inserting • 18
locking • 104
removing • 19
Barring
calls • 124
Battery
I
charging • 21
installing • 19
low battery indicator •
22
precautions • 165
removing • 20
MMS • 72
SMS • 66
Messages • 66
Care • 172
Characters
entering • 39
Clock • 114
Conference calls • 35
Connection tone • 96
Conversion, unit • 119
Cost of calls • 92
Icons • 14
Inbox • 67
Input mode
alert types • 95
broadcast • 84
changing • 40
language, set • 101
International calls • 27
Internet • 130
deleting • 72 82
,
Broadcast • 84
Browser, WAP • 130
greeting • 98
inbox • 67
outbox • 71
preset • 84
reading • 67
ring tone • 95
voice mail • 83
writing • 69
C
K
D
Calculator • 118
Calendar • 110
Caller
Key tones
Date, set • 114
Dialled calls • 91
Dialling • 26
SIM card numbers • 59
Display
type, select • 96
volume • 30
Keys
groups • 64
ID • 129
Microphone, mute • 31
Minute minder • 97
location • 10
Calls
Missed calls • 28
,
90
contrast • 100
external • 16
icons • 14
language • 101
main • 13
settings • 98
alert type • 94
answering • 29
Multi-party calls
L
making • 35
a second call • 33
Language, set • 101
private conversation •
barring • 124
costs • 92
dialled • 91
diverting • 122
emergency • 170
ending • 29
LCD
36
contrast • 100
external • 16
icons • 14
removing a participant •
37
E
main • 13
Ear-microphone • 38
178
179
Index
Index
Problem, solve • 158
PUK • 162
SIM card
dialling numbers • 59
N
Names
PUK2 • 162
inserting • 18
locking • 104
removing • 19
entering • 39
searching/dialling • 53
storing • 56
Q
SMS • 66
Soft keys, use • 23 24
Network selection • 128
Network services • 122
Numbers
Quiet mode • 97
,
Sound settings • 94
Speed-dialling • 57
Stopwatch • 121
Switching on/off
R
correcting • 26
FDN • 104
Received calls • 90
Redialling
automatically • 105
Reset settings • 107
Ringer
mode • 39 45
,
microphone • 31
phone • 23
speed-dial • 57
storing • 56
Symbolic mode • 39 45
,
incoming calls • 94
messages • 95
Road safety • 167
O
T
Options, select • 24
Organiser • 108
Outbox • 71 80
T9 mode • 39
Text
,
41
,
entering • 39
input modes • 39
language • 101
S
Safety
P
batteries • 165
electronic devices • 168
explosiveatmospheres•
170
Time
Password
setting • 114
world • 114
barring • 126
phone • 103
,
163
,
161
Timer • 120
To do list • 113
Tone
Personal Identification
Number • 161
Phone
information • 164
,
172
medical devices • 169
operating environment •
167
connection • 96
keypad • 96
message • 95
layout • 10
settings • 98
precautions •
road • 167
7
switching on/off • 23
Phonebook • 53
power on/off • 96
Travel adapter • 21
Second call, answer• 33
Security settings • 102
Service directory, dial • 65
Settings
copying numbers • 55
deleting numbers • 55
editing numbers • 55
erasing numbers • 55
memory status • 65
sending SMS • 55
storing numbers/names
V
Volume
alarm • 116
date • 114
call ringer • 94
earpiece • 30
keys • 30
display • 99
network • 122
phone • 98
•
56
PIN • 161
reset • 107
security • 102
sound • 94
text language • 101
time • 114
W
changing • 102
checking • 102
Waiting call • 33 127
,
PIN2 • 162
WAP Browser • 130
World time • 114
changing • 104
Power on/off tone • 96
Preset messages • 84
Side key • 105
WWW Services • 130
180
181
Index
182
183
184
|