SCH-a630 Series
A L L D I G I T A L
M O B I L E
P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
YH05.09_CB_032306_D3_rev
Licensed by Qualcomm Incorporated under one or more of the
following patents:U.S.Patent No.4,901,307;5,056,109;5,099,204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
GH68-009597A
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THEPRODUCT.IN ADDITION,SAMSUNG SHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
5
6
Table of Contents
7
8
Section 1: Getting Started
Topics Covered
•
•
•
•
Understanding this User Manual
Installing and Charging the Battery
Activating Your Phone
Setting Up Your Voicemail
This section allows you to start using your phone by
activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put
together.
Section 1: Getting Started
9
Understanding this User Manual
The chapters of this manual generally follow the same
order as the menus and sub menus in your phone. A
robust index for quick reference to most features begins
Also included is important safety information that you
should know before using your phone. Most of this
information is near the back of the guide, beginning on
Notes and tips
Throughout this guide are icons and text that are set
apart from the rest. These are intended to point out
important information, quick methods for activating
features, to define terms, and more. The definitions for
these methods are as follows:
• Notes — Explain alternative options within the current feature,
menu, or sub menu.
• Tips — Provide quick or innovative methods for performing
functions related to the subject at hand.
• Fast Facts — Are like snippets from the glossary. Fast facts
provides definitions in context and proximity to the menu or
feature in question.
• Important — Points out important information about the
current feature that could affect performance, or even damage
your phone.
10
Installing and Charging the Battery
Installing and Charging the Battery
Note: This phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and a Travel Adapter.
Important: Although the phone can be used while the battery is charging,
the battery must be fully charged before first use, otherwise you could
damage the battery.
1. Insert the bottom end of the
battery into the phone housing
with the label side down. The gold
contacts on the end of the battery
should match up with those on the
phone.
2. Push the top end of the battery down until it snaps into
place.
Remove the battery
Important: You must unplug the Travel Adapter before removing the
battery from the phone during charging to avoid damage.
1. Press and hold
to turn off the phone (if on).
2. Pull the battery release latch
toward the top of the phone. The
top of the battery should pop up.
3. Use your finger to lift the battery
(top end first) up and away from
the phone.
Section 1: Getting Started
11
Charge the battery
Your phone is powered by a rechargeable standard Li-
Ion battery. Only use Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
Use the Travel Adapter
The Travel Adapter is a
convenient, light-weight charger
that rapidly charges your phone
battery from any 120/ 220 VAC
outlet.
1. Plug the large end of the Travel Adapter into a standard
120 or 220 VAC wall outlet.
Important: For connection to an electrical supply not located in the U.S.,
you must use an adaptor of the proper configuration for the power outlet.
Use of the wrong adapter could damage your phone and void your
warranty.
2. Insert the smaller end of the
Travel Adapter into the charger/
accessory connector at the
bottom end of the phone.
Note: You can use your phone while charging,
however, the battery charges faster if the phone is turned off.
12
Activating Your Phone
Battery indicator
The battery indicator (
) in the upper-right corner of
the display indicates power level. Monitor the battery
strength and ensure your battery is adequately charged.
• Four bars (
) indicate a full charge.
) indicates a near empty battery.
) and a tone sounding
• An empty battery icon (
• A blinking empty battery icon (
indicate you have two to three minutes before the battery is
too low to operate the phone.
Note: If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and
follow their instructions for
obtaining service. We suggest that
you read this guide to fully
understand the services your phone
supports.
Turn your phone on
1. Open the folder on your phone, as
Press
shown.
1. Press the
key.
Note: As with any other radio-transmitting device, do not touch the
antenna as it affects call quality and may cause the phone to operate at a
higher power level than is necessary.
Section 1: Getting Started
13
2. Your service provider’s name momentarily appears in the
display and the phone begins searching for a network
signal.
3. Once the phone finds a signal, the time, date, and day
appear in the display.
4. You’re now ready to place and receive calls.
Note: If the phone is outside of the your Wireless Carrier’s coverage or
roaming area,
appears in the top of the display.
Turn your phone off
Press and hold
for two or more seconds. Your
phone powers off.
Note: If your phone is on and you press
for less than a second, the
phone will not power off. This prevents your phone from being turned off
accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which
can be retrieved any time.
Note: Once your Voicemail account has been set up, you can use the Voice
Mail folder (under the Message menu) to view details of voice messages
in your voice mailbox.
Voicemail Setup—New Customer
1. In standby mode, press and hold the
key or dial your
own mobile number to access Voicemail.
14
Setting Up Your Voicemail
2. Follow the prompts in the voice tutorial to setup your
account.
Listen to Voicemail
1. In standby mode, press and hold the
key or dial
your own mobile number to access Voicemail. You will
hear a prompt to enter your password.
2. Enter your password, then press
.
3. Follow the recorded prompts to listen to messages,
change administrative options, and so on.
Section 1: Getting Started
15
16
Section 2: Understanding Your Phone
Topics Covered
•
•
•
•
•
Features of Your Phone
Front View of Your Phone
Command Keys
Understanding the Display Screen
Your Phone’s Modes
This section outlines some key features of your
phone. It also displays the screen and the icons that
are displayed when the phone is in use.
Section 2: Understanding Your Phone
17
Features of Your Phone
• Domestic and international voice and text messaging service
(available on participating networks).
• High speed data (CDMA 2000 1x Technology)
• Global Positioning (GPS) Technology
• 128 x 160 pixel color Liquid Crystal display
• PIM functions (Scheduler, To Do List, etc.)
• TXT Messaging
• Enhanced Message Service (EMS)
• Voice Dial
• Speaker phone
• 32-Tone Polyphonic Ringtones
18
Front Views of Your Phone
Front Views of Your Phone
The following illustrations show the main elements of
your phone:
Earpiece
Display
Speaker key
Headset Jack
Navigation key
Right Soft key
Left Soft key
Volume keys
Send key
End key
Clear key
Voice Mail key
Alphanumeric
keys
Silent Mode key
VoiceCommand
key
Microphone
Power/Accessory
Connector
Section 2: Understanding Your Phone
19
Headset Jack
Volume keys
Activity LEDs
Command Keys
End key
1. Press and hold the End key ( ) to turn on your phone.
2. Press and hold
to turn off your phone.
3. Briefly press
once to disconnect a call, to return to
standby mode from any menu, or to cancel the last input.
Send key
The Send key (
) is used to answer calls, dial calls,
and to recall the last number(s) dialed, received, or
missed.
1. Press
2. Enter a number and briefly press
3. Briefly press in standby mode to display a list of
recent calls to and from your phone.
4. Press twice in standby mode to call the most
recently dialed number.
once to answer calls.
to make a call.
20
Command Keys
5. Press
to pick up a waiting call. Press
again to
switch back to the other call.
Navigation key
Use the directional keys on the navigation key to
browse menus, sub menus, and lists. Each key also acts
as a shortcut to launch applications. The up navigation
key is user-definable. Press
when replying to
prompts, and jumping to highlighted links on the web.
Soft keys
Functions for the soft keys are defined by what appears
above each in the display. There are two soft keys, the
left soft key (
) and the right soft key ( ).
Left soft key
Some functions of
the left soft key are
as follows.
Left
Soft
Key
Right
Soft
Key
Menu
Contacts
Function
Function
• When the left soft
key function in
the display is
Menu, press the
Menu (left) soft
key (
) to
open the menu
list.
Left
Soft
Key
Right
Soft
Key
• When the left soft
key function is
Option, press the Option (left) soft key (
some features.
) to view options in
• When the left soft key function is Edit, press the Edit (left) soft
key (
) to edit a Contacts list entry or Profile setting.
Section 2: Understanding Your Phone
21
Right soft key
Some functions of the right soft key are as follows.
• When the right soft key function is Back, press the Back (right)
soft key ( ) to return to the previous menu.
• In standby mode, press the Contacts (right) soft key ( ) to
open your Contacts list.
Clear key
The CLR key (
) is used to erase or clear numbers,
text, or symbols from the display. You can also use
to return to a previous menu or to return to
standby mode from any menu.
1. If you enter an incorrect character, briefly press
to
backspace (and delete) the character.
2. To erase the previous word in a sentence, press and hold
.
3. To back up one menu level, briefly press
4. To return to standby mode from any menu, press and
hold until you return to standby mode.
.
Understanding the Display Screen
The top line of the display is reserved for icons that
indicate network status, battery power, signal strength,
and more. The following table lists some display icons
and their descriptions.
22
Understanding the Display Screen
Display icons
Signal strength — Always appears when your phone is
on and indicates the current signal strength. More lines
indicate a stronger signal.
No service indicator — Your phone cannot find a
signal because you are outside a service area. You cannot
make or receive calls. Wait for a signal or move to an
open area to find a signal. This indicator always appears
when you first turn on your phone and disappears once
service is located.
Roaming indicator — Your phone is outside your
home area. While roaming, another wireless provider may
be handling your call. The service rate for the call may be
higher than those made from within your home area.
Please refer to your Wireless Carrier for roaming rates.
In Use — Indicates a call in progress. When dialing a
number, this icon flashes until the call connects.
New Message (Text) — You have one or more unread
text messages in your inbox. You are notified of a new
text message by animations and sound.
New Message (Voice) — You have one or more
unread voice messages in your voice mailbox. (Only
applicable on your Wireless Provider’s Network.) You are
notified of a new voice message by animations and
sound.
1X Protocol — Indicates your phone is using the 1X
protocol. The 1X protocol is capable of high-speed data
(3G).
1X
Note: 1X protocol is available only in your Wireless Carrier’s network.
Section 2: Understanding Your Phone
23
2G Protocol — Indicates your phone is using the IS95-
2G (Digital) protocol. The 2G protocol is not capable of
high speed data.
D
Vibrate mode — Your phone vibrates upon receiving a
call.
Battery strength — More black bars indicate a greater
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Alarm clock — The alarm clock is set.
Ringer off — Your phones call ringer is turned off.
GPS (United States only) — Global Positioning
Service (GPS) for 911 is set to On for emergency calls
only.
GPS (United States Only) — Global Positioning
Service is set to On for location and 911 calls.
Silent mode — The ringer is silenced for all alerts,
incoming calls, and incoming messages. The phone
alerts you to these by vibration and a flashing service
LED.
Speakerphone mode — The current active call can
now be heard using the speaker at the rear of the
phone.
TTY/TDD mode — Teletypewriter (TTY)/
Telecommunication Device for the Deaf (TDD) interface is
active. Connect TTY/TDD to headset connector on the left
side of the phone.
24
Understanding the Display Screen
Dialogue boxes
Dialogue boxes prompt for action, inform you of status,
or warn of situations such as low memory. Dialogue
boxes and their definitions are outlined below.
Choice
•Example: “Save message draft?”
?
Reconfirm
•Example: Delete all received messages?”
Performing
•Example: “Sending...” “Connecting...”
Completed
•Example: “Message sent successfully!”
Information
•Example: “New Message”
Error
•Example: “System Error!”
Warning
•Example: “Battery Low,” “Memory Full!”
Section 2: Understanding Your Phone
25
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the MENU (left) soft key ( ),
then press
(for Setup),
(for Others), and
for Call Answer. The following call answer options
appear in the display:
ⅷ Send Key — Only pressing
answers a call.
ⅷ Folder Open — Opening the phone’s folder or pressing
answers a call.
ⅷ Any Key — Pressing any key except the
key or key
answers a call.
2. Use the navigation keys to highlight an option.
3. Press the
key to select the method for answering
calls.
Input mode
Input mode determines how you enter text, numbers
and symbols. While at any text entry screen, press the
Option (left) soft key ( ), then choose the input mode
from the pop-up menu using the navigation keys.
Optional input modes are T9 Word, ABC, Symbol, 123,
for more information.)
Tip: You can also cycle between T9 Word, ABC, and 123 by repeatedly
pressing and holding the
key until the phone beeps.
26
Your Phone’s Modes
Lock Mode
When the phone is in Lock Mode, restrictions are
placed on phone use. You can receive calls and
messages, but cannot place outgoing calls (except for
emergency numbers) until you unlock the phone. Lock
Mode also restricts access to menus and the volume
key. Unlock your phone by entering the lock code when
information.)
Standby Mode
Standby mode is the state of the phone once it has
found service and is idle. The phone goes into standby
mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date
as well as all phone status icons.
1. While in standby mode, enter a phone number, and
press
to place a call.
2. Press
to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert
tone sounds and a notification message appears in the
display when a new message arrives.
• Press the View (right) soft key ( ) to view now.
• Press the Ignore (left) soft key ( ) to view later.
Section 2: Understanding Your Phone
27
Talk Mode
You can place and receive calls only when your phone
is on. While in a call your phone is in talk mode. Press
the MENU (right) soft key ( ) to display a list of
more information.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a
key.
• In standby mode, press and hold
. Entering Silent Mode
briefly appears in the display and your phone returns to standby
mode.
• While in Silent mode and standby mode, press and hold
.
Exit Silent Mode briefly appears in the display and your phone
returns to standby mode.
Vibrate Mode
In standby mode, repeatedly press the Down volume key
) until Vibrate appears in the display.
Ⅵ
(
The volume key is on the upper left side of phone, near
the left soft key ( ).
Adjust the Ringer
1. In standby mode, press the volume key (
left side of the phone up or down. Options are:
) on the
ⅷ Silent
ⅷ Level 3
ⅷ Level 4
ⅷ Level 5
ⅷ Vib+Ring
ⅷ 1 Beep
ⅷ Vibrate
ⅷ Level 1
ⅷ Level 2
2. When you are satisfied with the setting, press the
key. Your phone returns to standby mode.
28
Your Phone’s Modes
Tip: You can also enter the Volume/Vibrate sub-menu by pressing the
MENU (left) soft key ( ), then pressing the
and
keys. Use the
volume key on the left side of your phone to adjust the ringer setting.
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The or Vibrate+Ring icon (
when the phone is in or Vib+Ring mode.
) appears in the display
Section 2: Understanding Your Phone
29
30
Section 3: Call Functions
Topics Covered
•
•
•
•
•
•
•
•
•
Making a Call—Number Entry Dialing
Making a Call—Speed Dialing
Making a Call—Voice Dialing
Answering a Call
Ignoring a Call
Adjusting the Call Volume
Calls Log
Phone Modes
Roaming
This section explains how to make or answer a call.
This section also includes the features and
functionality associated with making or answering a
call.
Section 3: Call Functions
31
Making a Call—Number Entry Dialing
1. With the phone on, enter the number you wish to call
using the keypad.
2. Press the
key to place the call.
Manual Pause Calling
When you call automated systems (like banking
services), you are often required to enter a password or
account number. Instead of manually entering the
numbers each time, you can store the numbers in your
Contacts along with special characters called pauses.
• P pause—A hard pause stops the calling sequence until further
input from you.
• T pause—A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining
digits.
To manually call a number with pause(s) without
storing it to your Contacts:
1. Enter the number you wish to call.
2. Press the Option (left) soft key ( ). A pop-up menu
appears in the display containing the following options:
ⅷ P pause—a hard pause (awaits input from you).
ⅷ T pause—a two-second pause.
3. Use the navigation keys to highlight the desired pause
option.
4. Press to enter the highlighted pause into your number
sequence.
5. Press
to call the number.
32
Making a Call—Speed Dialing
Making a Call—Speed Dialing
You can store phone numbers and contact names in
your phone’s Contacts list. Speed Dialing lets you
quickly and easily dial any contact in your Contacts list
by using that contact’s location number in the list. You
can assign and change location (speed dial) numbers
for your contacts. (See "Assigning Speed Dial
One-Touch Dialing
Memory locations 001 through 009 are special One-
Touch dialing locations. You can call the phone
numbers stored in your phone’s Contacts list from 001
through 009 by pressing and holding a single key.
Example: For location number 001, press and hold the
key until the
name and number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 099 are special Two-
Touch dialing locations.
Example: For location number 013, briefly press the
key, then press
and hold the
key until the name and number appear in the display and
the number is dialed.
Three-Touch Dialing
Memory locations 100 through 500 are special Three-
Touch dialing locations.
Section 3: Call Functions
33
Example: For location number 113, briefly press the
key, briefly press
the
key again, then press and hold the
key until the name and
number appear in the display and the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) T
pause(s) simply wait for the pauses to pass and the dialing to
complete.
• If you speed dial a contact that contains (hard) P pause(s), wait
for the appropriate prompt(s) from the number you are calling
(credit card number, bank account number, and so on) and
enter the appropriate response(s).
Making a Call—Voice Dialing
Once you’ve recorded contact names and their associated
numbers for Voice Dial, you can use your voice to dial
Contacts.
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to
someone on the phone.
• When saying a name, say the first name then the last name.
Voice Dialing a Contact
1. In standby mode, press and hold
until the phone
prompts, “Please say the name.”
2. Say the name or phrase as it was recorded when you set
up the Voice Tag.
34
Answering a Call
3. The phone prompts, “Connecting,” and the number is
dialed.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains (two-second) T pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you voice dial a contact that contains (hard) P pause(s), wait
for the appropriate prompt(s) from the number you are calling
(credit card number, bank account number, and so on) and
enter the appropriate response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates
(Your phone provides: nine ring volume settings including 1-
beep, Vibrate, Ringer Off, or Vibrate+Ring, and/or different ring
types to distinguish callers.)
• The Activity LED flashes.
• A phone number (unless blocked by the caller) and a name
appear in the display (If the caller’s number and name are
stored in your Contacts list).
• If the caller can not be identified, Call from unavailable#, Call
from restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one
of the following events occurs:
• You answer the call.
• You ignore the call.
• The calling party ends the call.
• The call is sent to voice mail.
Section 3: Call Functions
35
Answering an Incoming Call
Press the key. The ring tone and/or vibration stop
and the caller’s voice can be heard in the earpiece.
Ⅵ
Tip: You can set your phone to answer calls when you open the folder,
when you press any key but the
Ignoring a Call
When you ignore an incoming call, the call is
immediately forwarded to your voice mail.
Ⅵ
During an incoming call, press the Ignore (left) soft key
). The caller is forwarded to your voice mail.
(
Adjusting the Call Volume
In standby mode, repeatedly press the Up or Down
volume key (
) until the desired Call Volume
Level appears in the display. The volume key is on the
left side of phone.
Calls Log
The Calls log retains information about Outgoing,
Incoming, and Missed calls. You can also view times for
your last call and the time totals for all calls.
36
Calls Log
Review the Calls Log
1. In standby mode, press the Menu (left) soft key ( ),
then press the key (for Calls). The following options
appear in the display:
ⅷ Press
ⅷ Press
ⅷ Press
ⅷ Press
ⅷ Press
for Outgoing calls.
for Incoming calls.
for Missed calls.
for Erase Logs.
for Call Timer.
2. Press the number key associated with the Calls log that
you wish to review or the function you wish to access.
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
Outgoing Calls
Your phone retains information about the last 20
outgoing calls and stores them in the Outgoing calls
log. You can review the Outgoing calls log for the time
and date of a call, as well as other information.
Note: To quickly view your most recent calls, briefly press
in standby
mode. Up to 20 of your most recent outgoing, incoming, and missed calls
appear in the display.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Calls) and press
again for
Outgoing. A list of your outgoing calls appears in the
display.
2. Use the navigation keys to highlight a call, then press
the key to view further information about the call.
Section 3: Call Functions
37
3. Press the Option (left) soft key ( ). A pop-up menu
appears in the display containing the following options:
ⅷ Talk—Call the selected number.
ⅷ Save—Save the number to your Contacts.
ⅷ Prepend—Add a prefix to the number.
ⅷ Erase—Erase the selected call from your Outgoing call log.
4. Use the navigation keys to highlight an option.
5. Press the key to perform the highlighted option’s
function.
Incoming Calls
Your phone retains information about the last 20
Incoming calls and stores them in the Incoming call log.
You can review the Incoming call log for the time and
date of the call, as well as other information.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Calls) and
for Incoming. A list of
your Incoming calls appears in the display.
2. Use the navigation keys to highlight a call, then press the
key to view further information about the call.
3. Press the Option (left) soft key ( ). A pop-up menu
appears in the display containing the following options:
ⅷ Talk—Call the selected number
ⅷ Save—Save the number to your Contacts
ⅷ Prepend—Add a prefix to the number
ⅷ Erase—Erase the selected call from your incoming call list.
4. Use the navigation keys to highlight an option.
5. Press the key to perform the highlighted option’s
function.
38
Calls Log
Missed Calls
Your phone retains information about the last 20 missed
calls (call that were never picked up) and stores them in
the Missed call log. You can review the Missed call log
for the time and date of the call, as well as other
information.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Calls) and
for Missed. A list of
your missed calls appears in the display.
2. Use the navigation keys to highlight a call, then press the
key to view further information about the call.
3. Press the Option (left) soft key ( ). A pop-up menu
appears in the display containing the following options:
ⅷ Talk—Call the selected number.
ⅷ Save—Save the number to your Contacts.
ⅷ Prepend—Add a prefix to the number.
ⅷ Erase—Erase the selected call from your incoming call list.
4. Use the navigation keys to highlight an option.
5. Press the key to perform the highlighted option’s
function.
Erase Logs
You can erase the Outgoing, Incoming, or Missed calls
log or you can erase All Calls.
Erase All Calls
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Calls),
(for Erase Logs), and
for Erase All Calls.
Section 3: Call Functions
39
“Erase All Calls?” appears in the display as well as the
following options:
ⅷ Yes—Erases all calls in the Calls log.
ⅷ No—Cancels erasing calls.
2. Use the navigation keys to highlight the desired option,
then press the key.
Call Timer
View the duration of your last call, total calls, and calls
made during the life cycle of you phone using the Call
Timer feature.
Note: Call Timer is not for billing purposes.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Calls) and
for Call Timer. The
following options appear in the display:
ⅷ Last Call—View the duration of your last call.
ⅷ Total—View the duration of the total call, incoming and
outgoing, made on your phone since the last erasure.
ⅷ LifeTime—View the duration of all calls on your phone since
activation (LifeTime timers cannot be erased).
ⅷ Erase Total—Erases the counters for the Total call timer.
Press the number of the option you wish enter, or use the
navigation keys to highlight the option and press the
key.
2. Press the
key if you wish to exit the menu.
Note: Although Total call timers can be erased, LifeTime call timers can
never be erased.
40
Phone Modes
Phone Modes
Standby Mode
Standby mode is the state of your phone once it is
powered on and has found a wireless service. Your
phone goes into standby mode:
• After you power the phone on.
• When you press the
key after a call or from within a menu
or phone function screen.
When in standby mode, you will see the time, day, and
date in the display as well as all currently active icons.
When in standby mode, you can:
• Make calls.
• Receive calls and messages.
• Access your phone’s menus.
• Change your phone’s mode.
• Activate Voice Command.
Receive Messages in Standby Mode
You can receive messages while in standby mode. An
alert tone sounds and a notification message appears in
the display when a new message arrives.
• Press the View (right) soft key ( ) to view the message now.
• Press the Ignore (left) soft key ( ) to view the message later.
Talk Mode
While in a call your phone is in talk mode. Press the
left soft key ( ) to display a list of In-Use menu
information).
Section 3: Call Functions
41
Lock Mode
When you lock your phone using the Lock Mode menu
information), the following restrictions are placed on
use of your phone:
• You can receive messages and calls.
• You cannot make outgoing calls (except for emergency
numbers).
• You cannot access your phone’s menus.
• The volume key is disabled.
Unlock your phone by following the prompts and
entering the lock code.
Silent Mode
With a single press of the key you can silence the call
ringer and tones that your keypad makes whenever
you press a key.
When you receive a call, the phone vibrates instead of
ringing.
Enter Silent Mode
Ⅵ
In standby mode, press and hold the
key.
“Entering Silent Mode” briefly appears in the display
and your phone returns to standby mode.
The Silent Mode icon (
display.
) appears in the top line of the
Exit Silent Mode
Ⅵ
In standby mode, press and hold the
key.
42
Phone Modes
“Exit Silent Mode” briefly appears in the display and
your phone returns to standby mode.
Vibrate Mode
You can set your phone to vibrate whenever you
receive an incoming call using either of the following
methods:
Ⅵ
In standby mode, repeatedly press the Down volume key
)until Vibrate appears in the display.
or do the following:
(
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds), (for Volume/Vibrate),
and for Calls.
2. Press the Left navigation keys until “Vibrate” appears in
the display, then press the key.
Text Input Modes
You use your phone’s text input modes (ABC, Symbol,
123, or T9 WORD) to enter text, numbers, or symbols
into messages, events, and other functions. The current
text input mode is indicated in the lower right part of
the display.
about text input modes.
Section 3: Call Functions
43
ABC Mode
Enter characters while in ABC mode by pressing the
key with the desired characters (such as
for “a”).
• Press the key repeatedly until the desired character (letter,
number, or symbol) appears in the display.
• Pause briefly and the displayed character is accepted and
inserted into your message.
• Press
to enter a space.
Tip: To enter large numbers of symbols or numbers quickly, use Symbol
mode or 123 mode as described in the following sections.
Symbol Mode
Symbol mode lets you use keypad number keys to
enter symbols such as @ or % into a text message, event,
or e-mail address without going through repeated key
presses as with ABC mode.
You press the key that corresponds with the symbol
that you wish to enter. For example, press
exclamation point (!).
for an
123 Mode
123 mode lets you use keypad number keys to enter
numbers into a text message, event, or e-mail address
without going through repeated key presses as with
ABC mode.
T9 Word Text Entry Mode
T9 Word recognizes a commonly used word that is
represented by a sequence of number key presses and
inserts that word into your message. (For example,
entering ‘8378’ would insert ‘test’ into your message.)
44
Roaming
Using T9 Word is much faster than the more traditional
text input method (ABC mode) and requires only one
press of a key per letter of the word that you are
entering. (For example, in ABC mode, you would have
to enter ‘83377778’ for ‘test’ instead of entering ‘8378’
for ‘test’ as in T9 Word mode.)
the T9 Word text input mode.
Roaming
What is Roaming
Roaming lets you use your SCH-a630 phone when you
travel outside of your Wireless Provider’s coverage
area. The Roaming icon ( ) appears in the top line of
the display when Roaming is active, and extra charges
may apply when making or receiving calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you
move in and out of your home network. The following
roaming options are available:
• Home only—Your phone is available for normal operation only
in the designated coverage area.
Section 3: Call Functions
45
• Automatic—Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
46
Menu Navigation
Access menus using the navigation key in tandem with
the two soft keys (
), or use a shortcut.
1. In standby mode press the Menu (left) soft key ( ).
The first of several menus appear in the display.
2. Use the navigation keys to browse phone menus.
3. Press
to enter the menu or sub menu presently
appearing in the display.
Return to the previous menu
1. Press the Back (right) soft key ( ) to return to the
previous menu.
2. If Back does not appear in the display, press
to
return to the previous menu.
Navigate using shortcuts
You can also access menus and sub menus using menu
numbers. This method is often called a “shortcut.” To
shortcut to a menu or sub menu, press the Menu (left)
soft key (
), then enter the menu and/ or sub menu
Key shortcuts" on page 49, for looking up the menu
shortcut number.
1. In standby mode, press the Menu (left) soft key ( ).
2. Press the number of the menu, sub menu, and so on to
arrive at the desired feature.
48
Menu Navigation
Navigation Key shortcuts
In standby mode, press a navigation key (as illustrated
below) to launch its corresponding application.
Navigation Key Shortcuts (in standby mode)
Sounds
Messages
Pllaanner
*NONE
*NONE can be customized. Press the Menu
(left) soft key ( ), then press
,
,
.
The In-Use Option
Access numerous menus and features even while in a
call.
Note: If the call is disconnected while accessing the In-Use Option, the In-
Use Option disappears from the display and the phone eventually returns to
standby mode.
1. While in a call, press the Menu (left) soft key ( ). The
following In-Use menu items appear in the display.
ⅷ
Calls — Display your recent incoming, outgoing, and missed
calls.
ⅷ
ⅷ
ⅷ
Contacts — Open the Contacts list and view contacts.
Silent/Quit — Silences/restores keypad tones.
Send Tel # — Sends your cell phone number as DTMF
tones. Useful for dealing with automated customer support
systems.
ⅷ
Send DTMF — Sends other phone’s number as DTMF
tones.
Section 4: Menu Navigation
49
ⅷ
ⅷ
ⅷ
Voice Privacy — When enabled (Enhanced), turns on
advanced voice encryption.
Location — Turn the GPS setting to Location on or 911
only.
Version — View the software and hardware version
information for your phone.
2. If you press the Msg (right) soft key ( ) in while in a
call, the following Messages menu items appear in the
display:
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Send New Msg
Voice Mail
Inbox
Outbox
Draft
Msg Setting
Erase Msg
3. Use the navigation key to highlight a menu. Press
to
open the highlighted menu or to activate the feature.
Menu Outline
Use the menu shortcuts on the following pages to
quickly access menus and sub menus. Press the Menu
(left) soft key ( ), then press the number to the right
of the menu to jump to that menu, sub menu, or
feature. For example, to jump to the Outbox sub menu,
press the Menu (left) soft key ( ), then press
(Messages),
(Outbox).
50
Menu Outline
1
Calls
1.1
1.2
1.3
1.4
Outgoing
Incoming
Missed
Erase Logs
1.4.1 Outgoing
1.4.2 Incoming
1.4.3 Missed
1.4.4 All Calls
Call Timer
1.5
1.5.1 Last Call
1.5.2 Total
1.5.3 LifeTime
1.5.4 Erase Total
2
3
Contacts
2.1
Find
2.2
Add
2.2.1 Number
2.2.2 E-Mail
Rename Group
My Phone#
Memory
2.3
2.4
2.5
Messages
3.1
Send New Msg
3.2
Voice Mail
Section 4: Menu Navigation
51
3.3
3.4
3.5
3.6
Inbox
Outbox
Draft
Msg Setting
3.6.1 Send Setting
3.6.1.1
3.6.1.2
3.6.1.3
SaveInOutbox
Callback #
Entry Mode
3.6.1.4
3.6.1.5
Insert Sign.
Delivery Ack
3.6.2 Msg. Alert
3.6.2.1
3.6.2.2
3.6.2.3
3.6.2.4
Volume/Vibrate
Type
Reminder
Alert On Call
3.6.3 Auto Play
3.6.4 Auto View
3.6.5 Auto Erase
3.6.6 Block/Unblock
3.6.7 Quick Text
3.6.8 Signature
3.6.9 Voice Mail #
Erase Msg
3.7
3.7.1 Voice
3.7.2 Inbox
3.7.3 Outbox
3.7.4 Draft
3.7.5 All Messages
52
Menu Outline
4
Planner
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
Today
Scheduler
Jump To Date
To Do List
Memo Pad
Alarm Clock
Count Down
World Time
Calculator
5
Display
5.1
Animation
5.1.1 Opening
5.1.2 Closing
5.1.3 Wallpaper
Banner
5.2
5.3
Backlight
5.3.1 Lcd
5.3.2 Keypad
5.3.3 Power save
Contrast
5.4
5.5
5.6
5.7
Auto Hyphen
Service LED
Dialing Color
Section 4: Menu Navigation
53
6
Sounds
6.1
Volume/Vibrate
6.1.1 Calls
6.1.2 Alarm
Ringer Type
6.2.1 Calls
6.2.2 Alarm
6.2
6.2.3 Planner
Key Beep
6.3
6.4
6.3.1 Volume
6.3.2 Tone Length
Alerts
6.4.1 Minute Beep
6.4.2 Service
6.4.3 Connect
6.4.4 Disconnect
6.4.5 Fade
6.4.6 Roam
6.4.7 Privacy
Power On/Off
Roam Ringer
6.5
6.6
7
Voice Kit
7.1
7.2
7.3
7.4
Record
Review
Erase All
Set Active
54
Menu Outline
8
Setup
8.1
Location
8.2
Network
8.2.1 Set NAM
8.2.2 Roam Option
Security
8.3
8.4
Others
8.4.1 Shortcut
8.4.2 Call Answer
8.4.3 Auto Retry
8.4.4 Language
8.4.5 Clock Set
8.4.6 TTY/TDD Mode
Version
8.5
Section 4: Menu Navigation
55
56
Section 5: Entering Text
Topics Covered
•
•
•
•
•
Changing the Text Entry Mode
Using T9 Mode
Entering Upper and Lower Case
Entering Symbols
Entering Numbers
This section outlines how to select the desired text
input mode when entering characters into your
phone. This section also describes how to use the T9
predictive text entry system to reduce the number of
key strokes associated with entering text.
Section 5: Entering Text
57
Changing the Text Entry Mode
1. While composing a message, press the Option (left) soft
key ( ) to display a pop-up menu with the following
options.
ⅷ
ⅷ
ⅷ
ⅷ
ABC — Choose the method of text entry.
Text Format — Choose the appearance of text entries.
Add Media — Add a number from your Contacts list.
Quick Text — Choose from up to 20 messages (11 are pre-
composed as factory defaults, but all 20 can be edited).
2. ABC is highlighted. Use the navigation left and right keys
to choose from one of the other three text entry modes of
Symbol, 123, and T9 WORD. Each text entry mode is
explained in greater detail in the following sections.
Using T9 Mode
T9 WORD recognizes the most commonly used word for
any sequence of key presses and inserts that word into
your message. It is much faster than the traditional
method of text entry (Abc) and requires only one key
press per letter of the word that you are spelling.
1. In standby mode, press the Menu (left) soft key ( ),
then press
compose a new text message.
2. Enter the phone number of the recipient, then press
(Messages),
(Send New Msg) to
.
3. Press the Option (left) soft key ( ) to display a pop-up
menu containing text entry mode options.
4. ABC is highlighted. Use the left/right navigation key to
display T9 Word, then press
.
58
Entering Upper and Lower Case
Now, for practice, enter the word “Samsung” into your
message by pressing each of the following keys only
once:
,
,
,
,
,
,
S
A
M
S
U
N
G
T9 Word recognizes that the most frequently used word
for the sequence that you just entered is “Samsung.” If
more than one word shares the same sequence, T9
Word provides the most common of the two. Press
to display other words in the dictionary, if available.
Entering Upper and Lower Case
• Enter characters while in ABC mode by pressing the key that
contains the desired characters (such as
for “h”).
• Press the key repeatedly to cycle through other available
characters for that key.
• Pause briefly when the desired character appears in the display
to accept the character and therefore insert it into the
message.
• Press
to enter a space.
• To cycle between uppercase, lower case, and initial caps for
characters in ABC mode, briefly press
.
Entering Symbols
Symbol mode enables you to enter symbols such as @
or % into a text message.
Section 5: Entering Text
59
1. In standby mode, press the Menu (left) soft key ( ),
then press (Messages), (Send New Msg) to
compose a new text message.
2. Enter the phone number of the recipient, then press
.
3. Press the Option (left) soft key ( ) to display a pop-up
menu containing the following options.
ⅷ
ⅷ
ⅷ
ⅷ
ABC — Choose the method of text entry.
Text Format — Choose the appearance of text entries.
Add Media — Add a number from your Contacts list.
Quick Text — Choose from up to 20 messages (11 are pre-
composed as factory defaults, but all 20 can be edited).
4. ABC is highlighted. Use the left/right navigation keys to
display Symbol, then press . The first of four
screens containing symbols appears in the display.
5. Use the navigation left and right keys to page through the
other symbols, if necessary.
6. Enter the key that corresponds with the symbol that you
wish to enter. For example, press
exclamation point (!).
for an
7. Repeat steps 3 through 6 to insert as many symbols into
your message as desired.
Entering Numbers
Enter numbers into a text message while in number
page 58 for instructions on changing text entry modes.
• While in 123 mode, press the key containing the number that
you wish to insert into your message.
60
Section 6: Understanding Your Contacts
Topics Covered
•
•
•
•
•
•
•
•
Your Contacts List
Adding a New Contacts Entry
Finding a Contacts Entry
Editing an Existing Contacts Entry
Renaming a Contacts Group
Deleting a Contacts Entry
Finding My Phone Number
Memory
This section explains how to manage your daily
contacts by storing their name and number in your
Contacts. Contacts entries can be sorted by name,
entry, or group.
Section 6: Understanding Your Contacts
61
Your Contacts List
Your Contacts list can store up to 500 numbers, with
each contact having up to five associated phone
numbers, an e-mail address, and a picture ID.
Each phone number can be up to 20 digits in length,
including hard pauses. Contact names can be up to 22
characters in length. You can also specify a memory
location for each entry, and you can restrict access to the
Contacts list to prevent unauthorized use.
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call
Open Your Contacts List
1. In standby mode, press the Menu (left) soft key ( ),
then press
for Contacts. The following Contacts
sub-menus and options appear in the display:
ⅷ Find—Find a phone number By Name, By Entry, or By Group.
ⅷ Add—Add a number or e-mail to your Contacts.
ⅷ Rename Group—Rename one of your five groups.
ⅷ My Phone#—View the 10-digit number assigned to your
phone by your Wireless Provider.
ⅷ Memory—View available memory for dial entries.
Note: You can also access your Contacts list from standby mode by
pressing the Contacts (right) soft key ( ). The Contacts Find screen
appears in the display.
2. Use the navigation keys to highlight the Contacts sub-
menu or option of your choice, and press the key.
62
Adding a New Contacts Entry
Tip: You can also access a sub-menu or menu option by pressing the
number key corresponds to the menu item number. For example, press
for Add.
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list
or add information to an existing entry.
Using the Contacts Add Option
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Contacts) and
for Add. The
following options appear in the display:
ⅷ Number—Lets you enter a number to be dialed when calling
the new contact.
ⅷ E-mail—Lets you enter an e-mail address for the new
contact.
2. Use the navigation keys to highlight the desired option
and press the key.
3. Enter the phone number or e-mail address for the new
Contacts entry, then press the key. The following
options appear in the display:
ⅷ New Entry—Lets you create a new Contacts entry.
ⅷ Find—Lets you add the number or e-mail address you just
entered to an existing Contacts entry.
Section 6: Understanding Your Contacts
63
4. Use the navigation keys to highlight New Entry, then
press the key. The following (number type) icons
appear in the display:
Home
Pager
Office
Fax
Mobile
5. Use the navigation keys to highlight the number type that
matches your new entry and press the key. The
Contacts information screen appears in the display with
the Name field highlighted.
6. Enter a name or phrase to associate with the type using
for more information.)
7. Press the key to save the entry.
Adding Pauses to Contacts Numbers
When you call automated systems (like banking
services), you are often required to enter a password or
account number. Instead of manually entering the
numbers each time, you can store the numbers in your
Contacts along with special characters called pauses.
• P pause—A hard pause stops the calling sequence until further
input from you.
• T pause—A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining
digits.
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
64
Adding a New Contacts Entry
Note: Keep in mind that pauses count as digits towards the 20-digit
maximum.
Store Pauses in a Contacts Entry
1. In standby mode, enter the number you wish to store
(such as your bank’s teleservice number).
2. Press the Option (left) soft key ( ). The following pause
menu options appear in the display:
ⅷ P pause—a hard pause (awaits input from you).
ⅷ T pause—a two-second pause.
P pause is highlighted.
3. Use the navigation keys to highlight the pause option of
your choice.
4. Press the key to enter the highlighted pause into your
number sequence.
5. When you are finished entering the number and pauses,
press the Save (right) soft key ( ) to store the number
in your Contacts.
Saving a Number from a Call
Once you have finished a call, you can save the
number of the caller to your Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1. After you press the
key to end your call, the call
time, length of call, phone number, and name of the
other party (if available) appear in the display.
Section 6: Understanding Your Contacts
65
2. Press the Save (right) soft key ( ). The following
options appear in the display:
ⅷ New Entry—Lets you create a new Contacts entry.
ⅷ Find—Lets you add the number or e-mail address you just
entered to an existing Contacts entry.
Tip: You can also store a phone number by entering the number, and
pressing the Save (right) soft key ( ).
3. Use the navigation keys to highlight New Entry, then
press the key. The following (number type) icons
appear in the display:
Home
Pager
Office
Fax
Mobile
4. Use the navigation keys to highlight the number type that
matches your new entry and press the key. The
Contacts information screen appears in the display with
the Name field highlighted.
5. Enter a name or phrase to associate with the type using
for more information.)
6. Press the key to save the entry.
Storing Number from a Calls Log
You can store numbers from the Calls logs to your
Contacts.
1. In standby mode, press the Menu (left) soft key ( ),
then press
for Calls.
2. Press the corresponding number on the keypad to view
the following Calls logs:
66
Adding a New Contacts Entry
ⅷ Press
ⅷ Press
ⅷ Press
for Outgoing
for Incoming
for Missed
A list of your calls appears in the display.
3. Use the navigation keys to highlight the number you wish
to store in Contacts, then press the key.
4. Press the Option (left) soft key ( ).
5. Use the navigation keys to highlight Save, then press the
key. The following options appear in the display:
ⅷ New Entry—Lets you create a new Contacts entry.
ⅷ Find—Lets you add the number or e-mail address you just
entered to an existing Contacts entry.
6. Use the navigation keys to highlight New Entry, then
press the key. The following (number type) icons
appear in the display:
Home
Pager
Office
Fax
Mobile
7. Use the navigation keys to highlight the number type
that matches your new entry and press the key. The
Contacts information screen appears in the display with
the Name field highlighted.
8. Enter a name or phrase to associate with the type using
for more information.)
9. Press the key to save the entry.
Section 6: Understanding Your Contacts
67
Finding a Contacts Entry
Menu Method
If you have stored a named contact in your Contacts
list, Find lets you locate the entry quickly.
1. In standby mode, press the Contacts (right) soft key
(
). The Find screen appears in the display with By
Name showing.
2. Use the navigation keys to select the method you wish to
use to find the entry. The available Find methods are:
ⅷ By Name—Search the Contacts alphabetically by name.
ⅷ By Entry—Search the Contacts by entry number.
ⅷ By Group—Search the Contacts by selecting from one of the
five available groups.
Find by Name
This option lets you find a Contacts list entry by its
contact name.
1. In the Find screen, use the navigation keys to show By
Name in the display.
2. Enter the name of the contact as it appears in your
Contacts list.
Example: If you saved a contact name as “Amy Smith”, begin your search
for that contact by pressing
for “A”.
Note: As you enter letter, the entry number and names of the closest
matches (thus far) appear in the display.
68
Finding a Contacts Entry
3. When the desired Contacts entry is listed in the display,
highlight the contact using the navigation keys (if
necessary). Then do one of the following:
ⅷ Press the
key to dial the number associated with the
named contact.
ⅷ Press the key to view information about the contact.
ⅷ Press the Option (left) soft key ( ). The following options
appear in the display:
ⅷ Talk—Dials the selected contact.
ⅷ Edit—Lets you edit details of the highlighted name.
ⅷ Send Msg—Lets you send an SMS message to the
selected number.
ⅷ Erase—Erases the selected Contacts entry.
4. Use the navigation keys to highlight an option, then press
the key to enter that option’s sub-menu.
Find by Entry
This option lets you find a Contacts list entry by its
Location number.
1. In the Find screen, use the navigation keys to show By
Entry in the display.
2. When the desired Contacts entry is listed in the display,
highlight the contact using the navigation keys (if
necessary). Then do one of the following:
ⅷ Press the
key to dial the number associated with the
named contact.
ⅷ Press the key to view information about the contact.
ⅷ Press the Option (left) soft key ( ). The following options
appear in the display:
ⅷ Talk—Dials the selected contact.
Section 6: Understanding Your Contacts
69
ⅷ Edit—Lets you edit details of the highlighted name.
ⅷ Send Msg—Lets you send an SMS message to the
selected number.
ⅷ Erase—Erases the selected Contacts entry.
3. Use the navigation keys to highlight an option, then press
the key to enter that option’s sub-menu.
Find by Group
This option lets you find a Contacts list entry with a
specific Group name.
1. In the Find screen, use the navigation keys to show By
Group in the display.
2. Use the navigation keys to highlight the Group field.
3. Use the navigation keys to show the name of the group
you wish to search. As each group name appears in the
display, entries that are assigned that group name are
listed in the display beneath it.
4. When the desired Contacts entry is listed in the display,
highlight the contact using the navigation keys (if
necessary). Then do one of the following:
ⅷ Press the
key to dial the number associated with the
named contact.
ⅷ Press the key to view information about the contact.
ⅷ Press the Option (left) soft key ( ). The following options
appear in the display:
ⅷ Talk—Dials the selected contact.
ⅷ Edit—Lets you edit details of the highlighted name.
ⅷ Send Msg—Lets you send an SMS message to the
selected number.
ⅷ Erase—Erases the selected Contacts entry.
70
Editing an Existing Contact Entry
5. Use the navigation keys to highlight an option, then press
the key to enter that option’s sub-menu.
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed
quite easily.
1. In standby mode, press the Contacts (right) soft key
(
). The Find screen appears in the display with By
Name showing.
2. Use the navigation keys to display the search method
that you wish to use (By Name, By Group, or By Entry).
3. Enter information to find the Contacts list entry, or use
the navigation keys to highlight the entry containing the
number that you wish to edit.
4. Once the entry is highlighted, press the key.
5. Use the navigation keys to highlight the number within
the entry that you wish to edit.
6. Press the Option (left) soft key ( ). The following
options appear in the display:
ⅷ Talk—Dial the selected number.
ⅷ Edit—Edit selected number.
ⅷ Send Msg—Send an SMS message to the selected number.
ⅷ Erase—Erase the selected number.
7. Use the navigation keys to highlight Edit, then press the
key.
8. Press
to backspace and delete numbers.
9. Press and hold
to clear all numbers in the
highlighted field.
Section 6: Understanding Your Contacts
71
10. When you are finished editing the number, press the
key. Your changes are saved and a confirmation
message appears in the display.
Assigning Speed Dial Numbers
When you add an entry to the Contacts list, you have
the option of letting the phone assign a Location (Speed
Dial) number or of selecting or entering a Location
number. You can also change a contact’s Location
number.
1. In standby mode, press the Contacts (right) soft key
(
). The Find screen appears in the display with By
Name showing.
2. Use the navigation keys to display the search method
that you wish to use (By Name, By Group, or By Entry).
3. Enter information to find the Contacts list entry, or use
the navigation keys to highlight the entry containing the
Location number that you wish to change.
4. Once the entry is highlighted, press the key.
5. Use the navigation keys to highlight SpeedDial.
6. With SpeedDial highlighted, press the Edit (left) soft key
(
).
7. Enter the new SpeedDial Location number.
8. Press the key to save your changes.
Add a Number or E-mail Address to an Existing Entry
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Contacts) and
for Add. The
following options appear in the display:
72
Editing an Existing Contact Entry
ⅷ Number—Lets you enter a number to be dialed when calling
the new contact.
ⅷ E-mail—Lets you enter an e-mail address for the new
contact.
2. Use the navigation keys to highlight the desired option
and press the key.
3. Enter the phone number or e-mail address for the new
Contacts entry, then press the key. The following
options appear in the display:
ⅷ New Entry—Lets you create a new Contacts entry.
ⅷ Find—Lets you add the number or e-mail address you just
entered to an existing Contacts entry.
4. Use the navigation keys to highlight Find, then press the
key.
5. Use the navigation keys to show the search method that
you wish to use (By Name, By Group, or By Entry).
6. Enter information to find the entry and/or use the
navigation keys to highlight the desired entry and press
the key. The following number types appear in the
display:
Home
Pager
Office
Fax
Mobile
7. Use the navigation keys to highlight the number type that
matches the number you are adding, then press the
key.
8. Press the key again at the Contacts menu. The
number is added to the existing entry.
Section 6: Understanding Your Contacts
73
Edit an Existing E-mail Address
1. In standby mode, press the Contacts (right) soft key
(
). The Find screen appears in the display with By
Name showing.
2. Use the navigation keys to display the search method
that you wish to use (By Name, By Group, or By Entry).
3. Enter information to fine the entry, or use the navigation
keys to highlight the entry that you wish to edit.
4. Once the entry is highlighted, press the left soft key (
)
Option. A pop-up menu appears in the display with Edit
highlighted.
5. Press the key.
6. Use the navigation keys to highlight the E-mail field.
To insert the @ symbol, press the Option (left) soft key
(
). A pop-up menu appears in the display with ABC
highlighted.
8. Use the navigation keys to select Symbol. Then press
the key.
9. Press
(@ symbol), and enter the remainder of the e-
10. Press the left soft key ( ) Option.
11. Use the navigation keys to highlight .com, then use the
navigation keys to show the desired domain type (.com,
.edu, .net), then press the key.
12. Press the key to save your changes.
74
Renaming a Contacts Group
Renaming a Contacts Group
Use this option to rename a group in your Contacts list.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Contacts) and
for Rename
Group. The following default group names (or any
changed group names) appear in the display:
ⅷ Friend
ⅷ Family
ⅷ Colleague
ⅷ VIP
ⅷ No Name
2. Use the navigation keys to highlight the group that you
wish to rename, then press the key. The current
name of the group appears in the display with a flashing
cursor at the end of the name.
3. Enter a new group name using the keypad, then press
for more information.)
Deleting a Contact Entry
1. In standby mode, press the Contacts (right) soft key
(
). The Find screen appears in the display with By
Name showing.
2. Use the navigation keys to display the search method
that you wish to use (By Name, By Group, or By Entry).
3. Enter information to find the entry, or use the navigation
keys to highlight the entry that you wish to erase.
Section 6: Understanding Your Contacts
75
4. Press the Option (left) soft key ( ). A pop-up menu
containing the following options appears in the display:
ⅷ Talk—Dial the selected number.
ⅷ Edit—Edit selected number.
ⅷ Send Msg—Send an SMS message to the selected number.
ⅷ Erase—Erase the selected number.
5. Use the navigation keys to highlight Erase.
6. Press the key. The phone prompts you to confirm the
erasure.
7. Use the navigation keys to highlight Yes or No, then
press the key.
Finding My Phone Number
My Phone# displays the ten-digit number assigned to
your phone by your Wireless Provider.
Ⅵ
In standby mode, press the Menu (left) soft key ( ),
then press (for Contacts) and for My Phone#.
The phone number assigned by your Wireless Provider
appears in the display.
Memory
Use the Memory sub-menu to view the amount of
Contacts entries you have stored, as well as the
remaining memory.
Ⅵ
In standby mode, press the Menu (left) soft key ( ),
then press (for Contacts) and for Memory. The
amount of memory used and remaining for Contacts
entries appear in the display.
76
Section 7: Messaging
Topics Covered
•
•
•
•
•
•
•
Creating and Sending New Messages
Message Send Options
Retrieving New Messages
VoiceMail
Message Folders
Message Settings
Deleting Messages
This section explains how to create, send, receive, and
view different types of messages. This section also
includes the features and functionality associated
with messaging.
Note: Available memory is shared between all messages. You can store up
to 60 incoming and 60 outgoing messages. The exact number that you can
store is dependent upon message length.
Section 7: Messaging
77
Creating and Sending New Messages
This section guides you through the procedure to create
and send various types of messages.
Creating and Sending a Text (TXT) Message
1. In standby mode, press the Left navigation key, then
press
for Send New Msg.
Note: You can also access the Send New Msg. feature by pressing the
Menu (left) soft key ( ), then pressing
(for Messages) and
for
Send New Msg.
2. Enter the phone number of the recipient, then press the
key.
3. Enter the text for your message using the keypad. (See
information.)
4. At any point while composing a message, press the
Option (left) soft key ( ). The following options appear
in the display:
ⅷ ABC—The entry mode for your message. Other modes, which
are hidden, are Symbol, 123, and T9 Word. Use the
navigation keys to show each of the text entry modes.
ⅷ Quick Text—Insert a pre-composed message into the body of
your current message.
5. Once you are finished entering your message, press the
key. The following New Message options appear in
the display:
ⅷ Edit Send To—Edit the recipient’s Send To number.
ⅷ Edit Text—Edit the content of your message.
78
Message Send Options
ⅷ Send Options—Choose the Priority, Privacy, Delivery
Acknowledgement, and whether you wish to Insert a Signature
or Call Back # in the message.
ⅷ Save in Draft—Save the message to your Draft folder.
ⅷ Save Text—Save the text in your message as a Quick Text
message. Quick Text messages are pre-composed messages
that can be inserted into any message you choose.
6. To send your message, press the Send (left) soft key
(
).
Message Send Options
You can set priority, privacy, validity, and other options
before you send a message.
1. After you have composed a message and pressed the
key, you are returned to the New Message menu.
2. Use the navigation keys to highlight Send Options, then
press the key. The following Send Options appear in
the display:
ⅷ Priority—Assign a priority to your message.
ⅷ Privacy—Lets you attach a privacy indicator (NotRestricted,
Restricted, or Confidential) to the message.
ⅷ Delivery Ack—Lets you activate or deactivate the message
delivery acknowledgement function. When this function is
activated, the network informs you whether or not this
message has been delivered.
ⅷ Insert Sign.—Insert your pre-composed signature text into
the message.
ⅷ Call Back #—Insert a number into your message for the
recipient to call you back.
Section 7: Messaging
79
3. Use the navigation keys to display the various Send
Options for each menu item.
4. When the desired send option is highlighted, press the
key to confirm the selection or to enter the send
option’s sub-menu.
Retrieving New Messages
When you receive a message in standby mode, the
ringer sounds (unless turned off) and New Message
appears in the display along with the closed envelope
icon ( ). The date and time of the message also
appear in the display.
• Press the Ignore (left) soft key ( ) to return your phone to
standby mode. The message is saved to your Inbox where you
can view it later.
• Press the View (right) soft key ( ) to open the message,
where you have the option to Reply, Forward, Erase, Save Text,
Save Msg, Save Contact, or Block sender.
Retrieve Messages While in a Call
When you receive a message while in a call, New
Message appears in the display along with the closed
envelope icon ( ). To view the message without
disconnecting the call:
• Press the Ignore (left) soft key ( ) to ignore the message and
save it to your inbox where you can view it later.
• Press the View (right) soft key ( ) to open the message, your
call remains connected.
80
Voice Mail
Voice Mail
Voice Mail allows callers to leave voice messages in
your voice mailbox, and lets you review, play, and
delete your voice messages any time you are in a
network coverage area.
Voice Mail Setup
Before callers can leave voice mail messages, you must
Check your Voice Mail
New voice messages in your voice mailbox are logged
in the Voice Mail folder on your phone. You can check
the originators and receipt times and dates for your
voice mail by opening your Voice Mail folder. See
Access your Voice Mail
1. In standby mode, press and hold the
key until you
are connected to the voice mail system. A recorded
message prompts you for a password.
2. Enter your password, then press the key. Follow the
recorded prompts, to listen to your voice message,
change administrative options, and so on.
Note: You can also dial your voice mailbox from your Voice Mail folder. See
Section 7: Messaging
81
Message Folders
Voice Mail
New voice messages in your voice mailbox are logged
in the Voice Mail folder of the Messages menu. Open
the Voice Mail folder to view the Callback # (if
available), Urgency, and other details of new voice mail
messages.
1. In standby mode, press the Left navigation key, then
press
(for Voice Mail).
A Voice Mail status screen indicating the number of new
messages in your voice mailbox, their urgency, and any
callback numbers appears in the display.
2. Press the
the message.
key to call your voice mailbox and listen to
Note: You can also press and hold the
key to dial your voice mailbox.
Inbox
Received messages of all types (except Voice Mail) are
stored in the Inbox.
1. In standby mode, press the Left navigation key, then
press
for Inbox.
Note: You can also open the Inbox folder by pressing the Menu (left) soft
key ( ), then pressing
(for Messages) and
again for Inbox.
Tip: While in a call, press the MSG (right) soft key
Messages menu.
to open the
82
Message Folders
2. Use the navigation keys to highlight an incoming
message that you wish to view.
3. Press the key to view the highlighted message.
4. While viewing your message, you can press the Options
(left) soft key ( ). The following options appear in the
display:
ⅷ Reply—Lets you reply to a message.
ⅷ Forward—Lets you forward the message to other Email
addresses or phone numbers.
ⅷ Erase—Erases the selected message.
ⅷ Save Text—Saves text in the message to Quick Text.
ⅷ Save Msg—Save the message to the Saved message folder.
ⅷ Save Contact—Save the sender’s number to your Contacts.
ⅷ Block Sender—Block future messages from the sender.
5. Use the navigation keys to highlight an option. Press the
key to perform the function for the highlighted option.
Outbox
Your phone stores outgoing messages in the Outbox,
regardless of whether the message was successfully
transmitted to, or received by, the addressee.
Tip: Verify whether and when a message or e-mail was successfully
1. In standby mode, press the Down navigation key, then
press
for Outbox. A list of your outgoing messages
appears in the display.
Section 7: Messaging
83
Note: You can also open the Outbox folder by pressing the Menu (left) soft
key ( ), then pressing (for Messages) and for Outbox.
2. Use the navigation keys to highlight a message that you
wish to review, the press the key.
3. Press the Option (left) soft key ( ). The following
options appear in the display:
ⅷ Re-send—Re-send the message.
ⅷ Save Msg—Save the message to the Saved Msg folder.
ⅷ Erase—Erase the message.
4. Use the navigation keys to highlight the desired option.
5. Press the key to perform the function for the
highlighted option.
Draft folder
Messages in the Draft folder are those that have been
composed but never sent. You can return to the Draft
folder at any time to view, edit, or send a draft message.
1. In standby mode, press the Left navigation key, then
press
for Draft. A list of your draft messages
appears in the display.
Note: You can also open the Draft folder by pressing the Menu (left) soft
key ( ), then pressing
(for Messages) and
for Draft.
2. Use the navigation keys to highlight the message that
you wish to view, the press the key.
3. Press the left soft key ( ) Options, to display the
options listed.
ⅷ Edit—Edit the message.
ⅷ Erase—Erase the message.
84
Message Settings
4. Use the navigation keys to highlight the desired option.
5. Press the key to perform the function for the
highlighted option.
Messages and Lock Mode
Your phone can still receive messages while in Lock
Mode. The time and date of the message appear in the
display, but you cannot access the message until you
enter the lock code. (See “Lock Phone” on page 120 for
more information.)
Message Settings
The Msg Settings folder lets you define numerous
message settings such as ringer types and save options.
1. In standby mode, press the Left navigation key, then
press
for Msg Setting. The following Msg Setting
options appear in the display:
ⅷ Send Setting—Options to Save In Outbox, Callback #, Entry
Mode, Insert Sign., Delivery Ack.
ⅷ Msg Alert—Set Volume/Vibrate, Ringer type, Reminder, and
Alert On Call.
ⅷ Auto Play—Auto Play auto scrolls messages that are two
pages or more.
ⅷ Auto View—Select Auto View on/off.
ⅷ Auto Erase—Automatically erase first message received
after memory is full.
ⅷ Block/Unblock—Block messages from a specified web
address or phone number.
ⅷ Quick Text—Insert a pre-composed message into the
message.
Section 7: Messaging
85
ⅷ Signature—Create a signature, which appears at the bottom
of all outgoing messages.
Note: You can also access the Message Settings menu by pressing the
Menu (left) soft key ( ), then pressing
(for Messages) and
for
Msg Setting.
2. Use the navigation keys to highlight the desired sub-
menu. Press the key to enter the sub-menu and
adjust the selected message settings.
Message Alerts
1. In standby mode, press the Left navigation key, then
press (for Msg Setting) and for Msg. Alert. The
following sub-menus appear in the display:
ⅷ Volume/Vibrate—Lets you set the default volume for
message alerts.
ⅷ Ringer Type—Lets you assign ringer types and melody tones
for message alerts.
ⅷ Reminder—Lets you set how often the message alert
reminder sounds (Off, Once, or Every 2 min.)
Note: You can also access the Message Settings menu by pressing the
Menu (left) soft key ( ), then pressing
(for Messages),
(for
Msg Setting), and
for Msg. Alert.
2. Use the navigation keys to highlight the desired sub-
menu, then press the key to enter the sub-menu and
adjust settings.
86
Deleting Messages
Deleting Messages
You can erase all of the messages in each/ all of your
message folders from one convenient location.
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messages
menu, open the message folder where the message to be deleted is stored,
then select and delete the message from the Option menu while viewing
the message content.
1. In standby mode, press the Left navigation key, then
press
for Erase Msg. The following options appear
in the display:
ⅷ Voice—Lets you delete all voice mail log entries from your
Voice Main folder.
ⅷ Inbox—Lets you delete all messages from your Inbox.
ⅷ Outbox—Lets you delete all messages from your Outbox.
ⅷ Draft—Lets you delete all draft messages from the Draft
folder.
ⅷ Saved—Lets you delete all messages from the Saved folder.
ⅷ All Messages—Lets you delete all messages from all
message folders.
Note: You can also access the Message Settings menu by pressing the
Menu (left) soft key ( ), then pressing
(for Messages), and
for
Erase Msg.
2. Use the navigation keys to highlight the folder
containing the messages that you wish to delete.
3. Press the key to open the highlighted folder. You are
prompted to confirm the erasure of all messages in the
folder.
Section 7: Messaging
87
4. Use the navigation keys to highlight Yes or No, then
press the key.
88
Section 8: Planner
Topics Covered
•
•
•
•
•
•
•
•
•
•
Opening Planner
Today
Scheduler
Jump To Date
ToDoList
MemoPad
AlarmClock
Count Down
WorldTime
Calculator
The topics covered in this section allow you to
schedule appointments, view the calendar, create To-
Do lists, set an alarm, and perform simple math
calculations.
Section 8: Planner
89
Opening Planner
Planner is a suite of PIM (Personal Information
Management) applications such as a Calendar, To Do
List, and Memo Pad. Schedule events, set reminders,
create to do lists, perform calculations, and more with
the digital assistant functionality of this useful feature.
1. In standby mode, press the Right navigation key. The
Planner menu opens and the following applications list
appears in the display:
ⅷ
Today — Enter up to nine events and set associated alarms
for the current day.
ⅷ
Scheduler — Schedule events for any day by indicating
each event’s start and end time.
ⅷ
ⅷ
Jump To Date — Takes you directly to any date you enter.
To Do List — Enter up to 20 tasks and set an alarm for
each.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Memo Pad — Enter a memo, which can be viewed at any
time. Memos do not have an alarm setting.
Alarm Clock — Set an alarm for any day and time. The
alarm can be set to activate even if the phone is off.
Count Down — View the amount of time between the
current time and any event you want to schedule.
World Time — Set the local time and the time for one other
time zone anywhere in the world.
Calculator — Use the calculator to perform numeric
calculations
Note: You can also access the Planner feature by pressing the Menu (left)
soft key ( ), then pressing
for Planner.
90
Today
2. Use the navigation key to highlight an application. Press
to enter the highlighted application’s sub menu. The
following sections provide a detailed description on each
application and its function.
Today
You can schedule up to nine events for the current day
by indicating each event’s start time and advance
notification time. Set alarms for events so that you can
be alerted before an event takes place. Events
scheduled for future dates automatically appear on
your Today events schedule for the present day.
Add a new event
1. In standby mode, press the Right navigation key, then
press
for Today.
You are prompted to enter a New Event, or the Event n/
m screen appears in the display showing the information
about any event already scheduled for the current day.
Note: You can also access the Today application by pressing the Menu
(left) soft key ( ), then pressing
(for Planner) and
for Today.
2. Enter details of the event using the keypad (Up to 32
characters).
3. Press the Option (left) soft key ( ) to display a pop-up
menu containing the following text entry mode options:
ⅷ
ⅷ
ⅷ
T9 Word
ABC
Symbol
Section 8: Planner
91
ⅷ
123
Note: The current mode of text entry is indicated in the lower right of the
display.
4. Use the navigation keys to highlight the entry mode you
want and press , or press
menu.
to exit the pop-up
5. When you are finished entering details for the event,
press . You are prompted to enter the time and date
for the event.
6. Enter the time and date for the event using the keypad.
ⅷ Press
for A.M. when P is highlighted.
ⅷ Press
for P.M. when A is highlighted.
7. When you are finished entering the time and date, use
the navigation keys to highlight the Notification field.
8. Use the left and right navigation keys to select the
amount of time that you want to be notified by an alert
before the event occurs.
9. Press to store the event in your calendar. An alert will
notify you prior to the event, if you set the notification
alert.
The Event n/m screen appears in the display showing
the information about this event.
10. Press the Option (left) soft key ( ). A pop-up menu
containing the following event handling options appears
in the display:
ⅷ
Add New — Adds another event to the current day.
ⅷ
Edit — Returns you to the event input screen to make any
desired changes.
92
Scheduler
ⅷ
ⅷ
Erase — Deletes this event from the current day.
Erase All — Erases all events for the current day.
11. Press
to exit the pop-up menu. Press
again to
return to the Planner menu.
Scheduler
Scheduler allows you to view the current, past, or
future month in a monthly calendar layout. While
viewing the calendar, the current date is highlighted
and days with scheduled events are surrounded by a
box.
View an event
1. In standby mode, press the Right navigation key, then
press
for Scheduler.
A calendar appears in the display with the current date
highlighted. The month and year also appear.
Note: You can also access the Scheduler application by pressing the Menu
(left) soft key ( ), then pressing
Scheduler.
(for Planner) and
for
2. Use the navigation keys to move around within the
calendar.
3. Press the volume up key to view previous months.
4. Press the volume down key to view future months.
5. Press to open a date that is highlighted.
Section 8: Planner
93
6. Press the Option (left) soft key ( ) while viewing the
calendar. A pop-up menu containing the following
options appears in the display:
ⅷ
View — View events for any date surrounded by a box.
ⅷ
Add new — Add a new event for the date.
7. Use the navigation keys to highlight an option.
8. Press to select the option.
Jump To Date
You can to go directly to any date that you specify in
the Jump to Date entry screen.
1. In standby mode, press the Right navigation key, then
press
for Jump To Date. The Jump to Date entry
screen appears in the display with the current month
highlighted.
Note: You can also access the Jump to Date application by pressing the
Menu (left) soft key ( ), then pressing
Jump To Date.
(for Planner) and
for
2. Enter the desired Jump to Date and press . The
calendar month for the date that you specified appears in
the display with the current date highlighted.
To Do List
The To Do List allows you to create a task list. You can
store, prioritize and manage up to twenty To Do List
tasks.
94
To Do List
1. In standby mode, press the Right navigation key, then
press for To Do List. The Add To Do screen
appears in the display.
Note: You can also access the To Do List application by pressing the Menu
(left) soft key ( ), then pressing
List.
(for Planner) and
for To Do
2. Enter details of the task using the keypad. Press the
Option (left) soft key ( ) to display a pop-up menu
containing the following text entry mode options:
ⅷ T9 Word
ⅷ ABC
ⅷ Symbol
ⅷ 123
3. Use the navigation keys to highlight the entry mode that
you want to use and press , or press
pop-up menu.
to exit the
4. When you are finished entering details for the task, press
. You are prompted to enter the priority for the task.
5. Use the navigation keys to select High or Low priority.
6. Use the down navigation key to highlight the Enter Date
field.
7. Enter a time and date for the task using the keypad.
ⅷ Press
for A.M. when P is highlighted.
ⅷ Press
for P.M. when A is highlighted.
8. Press to save the task.
Section 8: Planner
95
Add, edit, or erase tasks
1. In standby mode, press the Right navigation key, then
press
for To Do List. The Add To Do screen appears
in the display.
2. Use the navigation key to browse tasks in your To Do
List. Events are presented in order of priority.
3. Press the Option (left) soft key ( ) while viewing your
To Do List. A pop-up menu with the following options
appears in the display.
ⅷ
ⅷ
ⅷ
ⅷ
Add new — Add a new task to the To Do List.
Edit — Edit the task currently appearing in the display.
Erase — Erase the task currently appearing in the display.
Erase All — Erase all tasks from your To Do List.
4. Use the navigation keys to highlight an option.
5. Press to select the option.
Memo Pad
You can create notes and store them in Memo Pad. You
cannot set a priority or an alert for stored notes. Return
to Memo Pad anytime you want to review and edit
your notes.
1. In standby mode, press the Right navigation key, then
press
for Memo Pad.
If you have any stored memos, they appear as a list in
the display. If this is your first time in Memo Pad, you are
prompted to add a new memo.
96
Memo Pad
Note: You can also access the Jump to Date application by pressing the
Menu (left) soft key ( ), then pressing
Memo Pad.
(for Planner) and
for
2. Enter a memo using the keypad.
3. Press the Option (left) soft key ( ) to display a pop-up
menu containing the following text entry mode options:
ⅷ T9 Word
ⅷ ABC
ⅷ Symbol
ⅷ 123
4. Use the navigation keys to highlight the entry mode that
you want to use, or press
to exit the pop-up menu.
5. When you are finished entering details for the memo,
press . The memo is stored.
Review, add, edit, or erase memos
1. In standby mode, press the Right navigation key, then
press
for Memo Pad. Your list of stored memos
appears in the display.
2. Use the navigation keys to browse your memos.
3. Press to open a highlighted memo.
4. Press the Option (left) soft key ( ) while viewing your
memos. A pop-up menu with the following options
appears in the display:
ⅷ
Add new — Add a new memo to Memo Pad.
ⅷ
Edit — Edit the memo currently highlighted or appearing in
the display.
ⅷ
Erase — Erase the memo currently highlighted or appearing
in the display.
Section 8: Planner
97
ⅷ
Erase All — Erase all memos from Memo Pad.
5. Use the navigation keys to highlight the option you want.
6. Press to select the option.
Alarm Clock
Your phone has an Alarm Clock that can be set to go off
once, or daily at a specified time. Once set, the Alarm
Clock is easy to change or turn off completely.
The alarm does not function when the phone is turned
off. If the time for an alarm that was set for Once has
elapsed and the phone is off, the alarm occurs at the
same time on the following day.
1. In standby mode, press the Right navigation key, then
press
for Alarm Clock. The following options appear
in the display:
ⅷ Once
ⅷ Daily
ⅷ Off
Note: You can also access the Alarm Clock application by pressing the
Menu (left) soft key ( ), then pressing
Alarm Clock.
(for Planner) and
for
2. Use the navigation keys to highlight the frequency that
you want the alarm to occur, then press
3. Enter the time for the alarm using the keypad.
.
ⅷ Press
for A.M. when P is highlighted.
ⅷ Press
for P.M. when A is highlighted.
98
Count Down
4. Press when you are finished entering the time for the
alarm. The alarm is set and the alarm icon ( ) appears
in the display.
When an alarm sounds
An animated alarm clock appears in the display and an
alert sounds when the specified time for the alarm
arrives.
• Press
to silence the alarm.
• If the alarm was set as a Daily alarm, the alarm icon remains in
the top of the display.
• If the alarm was set as a Once only alarm, the alarm icon is
removed from the top of the display.
Turn off the alarm
1. In standby mode, press the Right navigation key, then
press
for Alarm Clock. The following options appear
in the display:
ⅷ Once
ⅷ Daily
ⅷ Off
2. Use the navigation keys to highlight Off, then press
.
All alarms are turned off.
Count Down
Count Down allows you to view the amount of time
between the current date and any event that you want
to schedule. You can create up to twenty Count Down
events.
Section 8: Planner
99
1. In standby mode, press the Right navigation key, then
press for Count Down.
Notes:
You can also access the Alarm Clock application by pressing the Menu
(left) soft key ( ), then pressing
Down.
(for Planner) and
for Count
If you have multiple count down timers, the event that is scheduled closest
to the current date appears in the display. Use the navigation keys to
browse timers.
2. Enter details for the Count Down event using the keypad.
3. Press the Option (left) soft key ( ) to display a pop-up
menu containing the following text entry mode options:
ⅷ T9 Word
ⅷ ABC
ⅷ Symbol
ⅷ 123
4. Use the navigation keys to highlight the entry mode that
you want to use, or press
to exit the pop-up menu.
5. Once you have finished entering details for the Count
Down event, press . You are prompted to enter a time
and date for the scheduled event.
6. Enter the time and date using the keypad.
ⅷ Press
for A.M. when P is highlighted.
ⅷ Press
for P.M. when A is highlighted.
7. Press to store the event.
100
Count Down
Review, add, edit, and erase count down events
Review scheduled Count Down events to determine
how much time remains between the current time/
date and any event that you have scheduled. You can
also add another event, edit, or erase previously
scheduled events.
1. In standby mode, press the Right navigation key, then
press
for Count Down.
2. Any stored Count Down events appear in the display. The
event scheduled closest to the current date appears first
in the display.
Event details, including the days, hours, and minutes left
until the scheduled event occurs also displays. The day,
date, and time of the scheduled event appear in the
bottom of the display.
3. Press the Option (left) soft key ( ) while viewing your
memos. A pop-up menu with the following options
appears in the display.
ⅷ
ⅷ
ⅷ
ⅷ
Add new — Add a new event to Count Down.
Edit — Edit the event currently appearing in the display.
Erase — Erase the event currently appearing in the display.
Erase All — Erase all scheduled events from Count Down.
4. Use the navigation keys to highlight the option you want.
5. Press to select the option.
Section 8: Planner
101
World Time
World Time allows you to view the time of day or night
in another part of the world. World Time displays time
in the 24 different time zones around the world.
1. In standby mode, press the Right navigation key, then
press
for World Time.
Note: You can also access the Alarm Clock application by pressing the
Menu (left) soft key ( ), then pressing
World Time.
(for Planner) and
for
2. Use the navigation keys to display the city and time that
you want to view. The following cities are supported.
New York
Caracas
Brasilia
London
Moscow
Alma-ata
Mid Atlantic
Cape Verde
Athens, Helsinki
Tashkent
Paris, Berlin
Abu Dhabi
Bangkok, Jakarta
Guam, Sydney
Samoa, Midway
San Francisco
Hong Kong, Beijing Seoul, Tokyo
Okhotsk
Wellington
Alaska
Honolulu, Hawaii
Denver, Arizona
Chicago, Mexico
Calculator
You can perform calculations, including addition,
subtraction, multiplication, and division using your
phone.
1. In standby mode, press the Right navigation key, then
press
for Calculator. The Calculator appears in the
display.
102
Calculator
Note: You can also access the Alarm Clock application by pressing the
Menu (left) soft key ( ), then pressing
Calculator.
(for Planner) and
for
2. Enter the first number in your equation using the keypad
(numbers can be up to nine digits long).
Note: Press
to enter a decimal point, or press
to change the sign
for a number to a negative.
3. Use the navigation keys to select the type of calculation
you want to perform.
4. Enter the second number in your equation using the
keypad (numbers can be up to nine digits long).
5. Press to perform the calculation and view the result.
6. Press
to erase the calculation and result.
7. Repeat Steps 2 through 5 to perform another calculation,
or press
again to return to the Planner menu.
Section 8: Planner
103
104
Section 9: Changing Your Settings
Topics Covered
•
•
•
•
Display Settings
Sound Settings
Voice Kit Settings
Setup Settings
This section explains the sound and phone settings
for your phone. It includes display settings, security
settings, folder settings, and extra settings associated
with your phone.
Section 9: Changing Your Settings
105
Display Settings
Set the standby mode animation, customize backlight
settings, and more using the Display menu.
1. In standby mode, press the Menu (left) soft key ( ),
then press
for Display. The following options appear
in the display:
ⅷ Animation — Choose the media that displays on your phone
when you turn it on, turn if off, and while in standby mode.
ⅷ Banner — Create your own personalized greeting that
appears in the display when your phone is in standby mode.
ⅷ Backlight — Set backlight options for the LCD and keypad.
ⅷ Contrast — Set the display contrast.
ⅷ Auto Hyphen — With Auto Hyphen enabled, your phone
automatically hyphenates phone numbers as they are entered.
ⅷ Service LED — Turn the service LED on or off.
ⅷ Dialing Color — Set the color(s) applied dialed numbers in
the display.
2. Use the navigation keys to highlight the sub-menu you
want.
3. Press to select the menu. The following sections
describe the sub-menus above.
Animation
Animation lets you choose the graphic images your
phone displays when it is turned on or off, or while it is
in standby mode (wallpaper).
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Display) and
for Animation.
The following options appear in the display.
106
Display Settings
ⅷ Opening — Choose the animation that appears in your
display when you turn on your phone.
ⅷ Closing — Choose the animation that appears in your display
when you turn off your phone.
ⅷ Wallpaper — Choose the graphic or animation that appears
in your display when the phone is in standby mode.
2. Use the navigation keys to highlight the menu you want,
then press . The currently selected image appears in
the display.
3. Use the navigation keys to highlight the image or
wallpaper you want, then press to select it.
Banner
Create your own personalized greeting that appears in
the display while your phone is in standby mode.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Display) and
for Banner.
Note: Press and hold
to erase an existing banner, if necessary.
2. Enter a word or short phrase that will appear in your
phone’s display while it is in standby mode (Up to 12
characters).
3. Press to save the new banner.
Backlight
You can set the backlight for your display or keypad to
remain on for a specified period of time or remain on as
long as your phone is open.
Note: Prolonged backlight use drains your battery faster.
Section 9: Changing Your Settings
107
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Backlight. The
following sub menus appear in the display:
ⅷ LCD — Sets the amount of time the backlight for the LCD
remains on after a period of inactivity. Optional settings are 5,
10, and 15 seconds as well as Folder Open.
ⅷ Keypad — Sets the amount of time the backlight for the
keypad remains on after a period of inactivity. Optional settings
are 5, 10, and 15 seconds as well as Folder Open.
ⅷ Power save — Unless the backlight setting for the LCD has
been changed, the backlight dims after a minute of inactivity,
and then turns off. With Power save enabled, the backlight for
the LCD is always dim. After approximately one minute of
inactivity, Power save turns the backlight off.
2. Use the navigation keys to highlight the menu you want,
then press to select it.
Contrast
Set the display contrast to your preference.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Display) and
for Contrast.
2. Use the left and right navigation keys to adjust the
contrast for the display.
3. Press to exit.
Auto Hyphen
Auto Hyphen automatically hyphenates phone
numbers as they are entered. For example: 580-437-
0000.
108
Display Settings
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and again for Auto
Hyphen. The following options are available:
ⅷ No
ⅷ Yes
2. Use the navigation keys to highlight the setting you want.
3. Press to select the setting.
Service LED
The Service LED, located near the antenna, serves the
following functions:
• Flashes red to indicate an incoming call or message.
• Lights briefly when you power the phone on.
• Flashes red when the phone is in need of a charge.
Turn the service LED off/on
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Display) and
for Service LED.
The following options appear in the display:
ⅷ Off
ⅷ On
2. Use the navigation keys to highlight your preference,
then press
.
Section 9: Changing Your Settings
109
Dialing Color
Set the color or colors applied to numbers entered using
the keypad to your preference.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Display) and
for Dialing Color.
The following options appear in the display:
ⅷ Basic — Shows entered numbers in black
ⅷ Rainbow — Shows entered numbers in a progression of
colors
ⅷ Monochrome — Shows entered numbers in the color you
select
ⅷ Hyphenate — Shows the first three, second three, and final
four entered numbers in separate colors you select
2. Use the navigation keys to highlight the desired option.
3. Press to select the desired option. Sample color
numbers appear in the display.
When you select the Monochrome or the Hyphenate
option, a color menu also appears near the bottom of the
display. Use the left and right navigation keys to select
the desired color(s). For the Hyphenate option, press the
Next (right) soft key ( ) to select succeeding groups of
digits.
4. Press the Done (left) soft key ( ) to exit.
Sound Settings
The Sounds menu provides a variety of options to
customize audio properties for such things as ringers,
keypad tones, alerts, shut down sounds, and more.
110
Sound Settings
Volume/Vibrate
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Sounds) and
for Volume/
Vibrate.
2. Use the navigation keys to highlight Calls or Alarm, then
press
.
3. Use the up and down volume keys to select one of the
following volume levels or vibrate modes:
ⅷ
ⅷ
ⅷ
ⅷ
Silent - No sound or vibration.
1 Beep - Plays a single beep without vibration.
Vibrate - Vibrates only, no sound.
Level 1-5 - Plays sound only at selected level without
vibration.
ⅷ
Vib+Ring - Vibrates first, then plays sound.
4. Press to save the setting.
Ringer type
The Ringer Type menu allows you to set a unique ring
for voice calls, messages, data/ fax, alarms, and
schedule. As you change a ringer type, it plays so you
can preview it.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Sounds), and
for Ringer Type.
The following ringer types appear in the display:
ⅷ
ⅷ
ⅷ
Calls
Alarm
Planner
Section 9: Changing Your Settings
111
2. Use the navigation key to highlight a ringer type, then
press . A pop-up menu containing the following
options appears in the display:
ⅷ
Preloaded
My Melody
ⅷ
3. Choose Preloaded to preview sounds included with your
phone, or choose My Melody to preview sounds you
have downloaded and saved.
4. A list of bells and melodies appears in the display, each
playing as it is highlighted.
5. Use the navigation keys to browse through available ring
tones.
6. When the desired ringer type plays, press to save the
setting.
Key beep
Use the Key Beep menu to adjust the tone volume that
your keypad generates when you press a key.
Key beep volume
1. In standby mode, press the Menu (left) soft key ( ),
then press
Volume is highlighted.
2. Press
(for Sounds) and
for Key Beep.
.
3. Use the volume keys or the navigation key to set the
volume level for keypad tones. A tone sounds as you
increase or decrease the volume setting.
4. Press when the key beep volume setting you want
displays. You are returned to the Key Beep sub menu.
112
Sound Settings
Key beep tone length
1. In standby mode, press Menu (left) soft key ( ), then
press (for Sounds) and for Key Beep. Volume
is highlighted.
2. Use the navigation keys to highlight Tone Length, then
press
.
3. Use the navigation keys to highlight Long or Normal.
4. Press to save your settings.
Alerts
You can set your phone to sound an alert whenever
you enter or leave your service area, connect or
disconnect a call, as well as other options.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Sounds) and
for Alerts.
The following options appear in the display:
ⅷ
ⅷ
Minute Beep — Sound an alert ten seconds before each
elapsed minute of a call.
Service — Sound an alert when you go into and out of your
coverage areas.
ⅷ
ⅷ
ⅷ
Connect — Sound an alert when a call is connected.
Disconnect — Sound an alert when a call is dropped.
Fade — Sound an alert when a dropped call occurs during a
conversation.
ⅷ
ⅷ
Roam — Sound an alert when you leave your home service
area while on a call.
Privacy — Sound a tone whenever you are in enhanced
privacy mode.
2. Use the navigation keys to highlight the sub menu you
want, then press
.
Section 9: Changing Your Settings
113
3. Use the left or right navigation key to activate (or
deactivate) the selected alert, then press
.
Power on/off
Set your phone to play a sound whenever you turn it
on or off.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Sounds) and
for Power On/Off.
The following options appear in the display:
ⅷ
ⅷ
Off
On
2. Use the navigation keys to highlight the option you want,
then press
.
Roam ringer
Set your phone to sound a unique tone when a call is
received outside your home service area. This feature is
set to Off by default.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Sounds) and
for Roam Ringer.
2. Use the navigation keys to highlight On or Off, then press
.
Voice Kit Settings
Your SCH-a630 phone includes voice recognition-based
dialing technology. You can use your voice in a natural
manner to dial up to 20 numbers. Please review the
following content to learn more about this useful feature.
114
Voice Kit Settings
The Voice Kit menu
Use the Voice Kit menu to configure the voice recognition
settings for your phone.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(Voice Kit). The following Voice Kit menu
items appear in the display:
• Record: Record Voice Tag entries.
• Review: Test, play, or erase Voice Tag entries.
• Erase All: Delete all Voice Tag entries.
• Set Active: Set Voice Tag entries as active.
2. Use the navigation keys to highlight the desired Voice Kit
menu item.
3. Press
to select the desired Voice Kit function. The
following three sections describe each Voice Kit item in
greater detail.
Record
Voice Dial lets you dial a number by saying the name or
phrase that you’ve recorded for that number. Before you
can use Voice Dial, you’ll need to record the names or
phrases that you wish to use.The Voice Kit lets you record
up to 20 names and phrases.
Tips for recording Voice Tags
• Record Voice Tag names or phrases in a quiet area.
• Choose a name or phrase that is not too long or short.
• Speak clearly and distinctly while recording.
• Avoid recording names or phrases that sound alike.
Section 9: Changing Your Settings
115
Record a Voice Tag for Voice Dial
1. In standby mode, press the Menu (left) soft key ( ),
then press
(Voice Kit). Record is highlighted.
2. Press
. The Quick Dial screen appears on the
display, and the phone prompts, “Please say the
name.”
3. Wait for the beep and then say the name or phrase.
The phone plays back the name or phrase, and then the
phone prompts, “Please repeat the name.”
4. Wait for the beep and then say the name or phrase again.
The phone plays back the name or phrase, the Voice Dial
screen appears in the display, and then the phone
prompts, “Please enter the number with your keypad
and press OK.”
5. Enter the phone number, then press
. You’re
prompted to enter the name.
6. Enter the name or phrase, then press
. The entry is
saved.
Review your Voice Dial list
1. In standby mode, press the Menu (left) soft key ( ),
then press
(Voice Kit). Record is highlighted.
2. Press
(Review). The Voice Tag List of recorded
names and phrases appears in the display.
3. Use the navigation key to highlight a name.
4. Press the Option (left) soft key ( ) to display a pop-up
menu with the options listed:
• Talk: Call the number for the voice tag entry.
116
Voice Kit Settings
• Erase: Delete the voice tag for the entry.
• Play All: Replay the voice tag entry.
5. Use the navigation key to highlight the desired option,
press
to perform the function for the highlighted
option.
Review a Voice Tag
1. In standby mode, press the Menu (left) soft key ( ),
then press
(Voice Kit). Record is highlighted.
2. Press
(Review). The Voice Tag List of recorded
names and phrases appears in the display.
3. Use the navigation key to highlight a name. Press
to display more information about the highlighted name.
4. Press the Option (left) soft key ( ) to display a pop-up
menu with the options listed:
• Talk: Call the number for the voice tag entry.
• Edit: Change the number for the voice tag entry.
• Erase: Delete the voice tag entry.
5. Use the navigation key to highlight the desired option,
press
to perform the function for the highlighted
option.
Erase all Voice Dial names
You can erase all recorded Voice Tag names and phrases
and their associated numbers from one easy location.
1. In standby mode, press the Menu (left) soft key ( ),
then press
2. Press
deletion.
(Voice Kit). Record is highlighted.
(Erase All). You’re prompted to confirm the
Section 9: Changing Your Settings
117
3. Use the Navigation keys to select Yes (to delete all Quick
Dial names) or No (to return to the Voice Kit menu) and
press
.
If you selected Yes, you’ll receive a confirmation
message that all Voice Tag names were deleted.
Set Active
Use the Set Active menu item to select the method for
Voice Kit activation.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(Voice Kit). Record is highlighted.
2. Press
(Set Active). The following activation options
appear in the display.
• [0] Only: Press and hold
call.
to activate Voice Kit for one
to activate Voice Kit for
• [0]/Folder: Press and hold
repeated calls. Open and close folder to make and end calls
using Voice Kit. Press to release Voice Kit.
• [0]/EarMic: Attach a headset to your phone. Press and hold
to activate Voice Kit. Now, you can make and end calls
using Voice Kit by plugging and unplugging the headset.
3. Use the navigation key to highlight the desired option,
press
to set the Voice Kit activation method for the
highlighted option.
Note: Your phone is initially set to [0] Only, so that when you press and
hold the
key, the voice kit commands are activated. If you select one
of the other options, such as Folder or EarMic, your phone will launch the
voice kit commands when you open the slide or when you attach the
optional headphone set to your phone, as well as when you press and hold
the
key.
118
Setup Settings
Setup Settings
Use the Setup menu to customize many of your
phone’s options to suit your preferences. Using this
menu, you can set or change security features,
shortcuts, language, and more.
Location
Location identifies your location to the network via
GPS. You can fully enable this setting or set GPS
(Global Positioning Service) to work only in the event
that you dial 911.
Note: Contact your Wireless Carrier to determine if, when, or where
location-based services are available.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Location. The
following Location options appear in the display:
ⅷ
ⅷ
Location On — GPS location setting is on wherever the
feature is available.
911 Only — GPS location setting is on only when you dial
911.
2. Use the navigation keys to highlight the option you want.
3. Press to select the desired Location setting. You are
returned to the Setup menu.
Network
The Network menu allows you to select Roam Option
and NAM settings for your phone. You can change
your roaming options or store two NAM settings,
which are essentially telephone numbers, for your
phone.
Section 9: Changing Your Settings
119
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Network.
The following options appear in the display:
ⅷ
Set NAM — NAM1 is the default, your phone operates on
the phone number assinged by your carrier. If you select
NAM2, your phone operates on your second number, if
assigned.
ⅷ
Roam Option — Set your phone’s roaming options to
Home only, Automatic-A, or Automatic-B.
2. Use the navigation keys to highlight the sub menu you
want, then press
.
3. Use the navigation keys and to highlight and select
from the available options.
Security
Use the Security menu to lock your phone, set up
emergency numbers, enable or disable voice privacy,
set restrictions, and more.
Lock Phone
Locking your phone prevents all outgoing calls, except
911 emergency calls, until you enter the (un)lock code.
With the phone in lock mode, you can, however,
answer incoming calls.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Security. You are
prompted to enter the lock code.
Note: The default lock code is the last four digits of your mobile phone
number.
120
Setup Settings
2. Press
for Lock Phone. The following options appear
in the display:
ⅷ
Never — The phone remains unlocked.
ⅷ
On power up — The phone locks automatically the next
time your phone is powered on and stays locked until you enter
the lock code.
ⅷ
Now — The phone locks immediately and stays locked until
you enter the lock code.
3. Use the navigation keys to highlight the Lock Phone
option you want.
4. Press to select the option.
Change Lock
The default lock code for your phone is the last four
digits of your phone number. It is advisable to change
the default lock code to a secret code for security
purposes.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Security. You are
prompted to enter the lock code.
Note: The default lock code is the last four digits of your mobile phone
number.
2. Press
for Change Lock. You are prompted to enter
the new lock code.
3. Enter the new lock code. You are prompted to re-enter
the new lock code for verification.
Note: For security reasons, your phone does not allow you to view the lock
code. If you change the lock code, be sure to write down or memorize the
new code.
Section 9: Changing Your Settings
121
4. Enter the new lock code again. Your changes are stored.
Emergency Numbers
Your phone provides the option of storing three
emergency numbers. Each number can be up to 32
digits in length. All emergency numbers can be dialed
manually at any time, even when your phone is in
locked or restricted mode.
Note: Emergency number 911 is coded into your phone. You can dial this
number any time, even when the phone is locked or restricted. If you call
911, an audible tone is heard and an Emergency prompt appears in the
display for the duration of the call.
Important! Because of various transmission
methods, network parameters, and user settings
necessary to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
Important! DO NOT depend on this phone as a
primary method of calling 911 or for any other
essential or emergency communications.
Remember to always turn your phone on and check for
adequate signal strength before placing a call.
Store Emergency Numbers
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Security. You are
prompted to enter the lock code.
Note: The default lock code is the last four digits of your mobile phone
number.
122
Setup Settings
2. Enter the lock code, then press
3. Press , or to select one of the three entry
options.
for Emergency #.
,
4. Enter the emergency number (up to 32 digits in length).
5. Press to save the number that you entered.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number using
your keypad.
2. Press
to place the call.
Voice Privacy
Note: This feature is only available on your Wireless Carrier’s network.
Voice Privacy, when enabled (that is, set to Enhanced),
turns on advanced voice encryption.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Security. You are
prompted to enter the lock code.
Note: The default lock code is the last four digits of your mobile phone
number.
2. Press
for Voice Privacy. The following options
appear in the display:
ⅷ
Standard — Voice privacy is disabled.
ⅷ
Enhanced — Voice privacy is enabled.
3. Use the navigation keys to highlight the Voice Privacy
option you want, then press
.
Section 9: Changing Your Settings
123
Restriction
Restriction allows you to restrict outgoing and
incoming calls. You can also restrict access to your
Contacts.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Security. You are
prompted to enter the lock code.
Note: The default lock code is the last four digits of your mobile phone
number.
2. Press
for Restriction. The following options appear
in the display:
ⅷ
ⅷ
ⅷ
Outgoing — When set to Yes, outgoing calls are restricted.
Incoming — When set to Yes, incoming calls are restricted.
Contacts — When set to Yes, all access to your Contacts
List is restricted (including speed dialing).
Note: The default restriction settings are all No.
3. Use the navigation keys to highlight the Restriction you
want, then press . The following options appear in the
display:
ⅷ
No — Unrestricted
ⅷ
Yes — Restricted
4. Use the navigation keys to highlight Yes or No, then
press
.
Erase memory
Erase memory erases your Voice Kit recordings. This
feature is useful if you want to give your phone to a
friend or family member.
124
Setup Settings
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security. You are
prompted to enter the lock code.
Note: The default lock code is the last four digits of your mobile phone
number.
2. Press
for Erase Memory. A confirmation prompt
appears in the display.
3. Use the navigation key to highlight Yes or No, then press
. A confirmation message appears in the display
while the memory is erased.
Reset Phone
The Reset Phone feature restores the factory default
settings, while erasing your saved options and clearing
your call logs. This cannot be undone once the
confirmation message is accepted.
Caution: When you reset the phone, the settings will return to factory
defaults which may be different from the settings that were in the phone
when you received it. If some features of the phone do not function
properly after using Reset Phone, please contact your Wireless Carrier for
instructions and details.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Security. You are
prompted to enter the lock code.
Note: The default lock code is the last four digits of your mobile phone
number.
2. Press
for Reset Phone. A prompt appears in the
display asking if you want to restore default settings
(except for the Contacts list).
Section 9: Changing Your Settings
125
3. Use the navigation key to highlight Yes or No, then press
.
Others
The Others menu contains options for setting Call
Answer mode, Language, and other settings.
Shortcut
The Shortcut menu allows you to customize the down
navigation key to launch any one of several functions
while in standby mode.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup),
(for Others), and
for
Shortcut. The following options appear in the display:
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Scheduler
Animation
Ringer Type
Alarm
Calculator
Memo Pad
2. Use the navigation keys to highlight the function you
want, then press
.
Now when your phone is in standby mode, you can
launch the selected function by simply pressing the
down navigation.
Folder Setting (Call Answer)
You can select a specific method for answering
incoming calls. Set your phone to any of the following
options:
• Send Key — Press
to answer an incoming call.
126
Setup Settings
• Folder Open — Open the folder cover to answer an incoming
call.
• Any Key — Press any key except
to answer an incoming
call.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Others), and
for
Call Answer. The following options appear in the
display:
ⅷ
ⅷ
ⅷ
Send Key
Folder Open
Any Key
2. Use the navigation keys to highlight the option you want
to use for answering calls, then press
.
Auto Retry
Auto Retry automatically re-dials a number if the call
does not connect. Depending upon your location, the
number of times your phone automatically dials the
number may vary.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup),
(for Others), and
for
Auto Retry. The following options appear in the display:
ⅷ
ⅷ
ⅷ
ⅷ
Off
Every 10 sec
Every 30 sec
Every 60 sec
2. Use the navigation keys to highlight the setting you want,
then press
.
Section 9: Changing Your Settings
127
Language
The Language option lets your change the language
used in voice prompts, menus, and key-input.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup),
(for Others), and
again for Language. The following options appear in the
display:
ⅷ
English
Spanish
ⅷ
2. Use the navigation keys to highlight your language
preference, then press
.
Clock Set
Use the Clock Set option to set the current date and
time.
Note: In digital service mode, the Clock Set option is disabled. The network
adjusts time and date automatically.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup),
(for Others), and
again for Clock Set. The Main Clock screen appears in
the display with the current hour digits highlighted.
2. Enter the current time and date using your keypad. The
month, day, hour and minute must be entered with 2
digits. The year requires all four digits, and you must
enter the hour in 24-hour format.
3. Press to save the time and date and to return to the
Setup menu.
128
Setup Settings
TDY/TDD Mode
Your phone is fully Teletypewriter (TTY)/
Telecommunication Device for the Deaf (TDD)
compatible. TTY/ TDD equipment is connected to your
phone through the headset connector on the left side of
the phone. TTY/ TDD must be enabled before you can
use your phone with a TTY/ TDD device.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup),
(for Others), and
for
TTY/TDD Mode. The following options appear in the
display:
ⅷ
ⅷ
ⅷ
ⅷ
TTY Off — Disables TTY/TDD mode.
TTY + Hear — Enables TTY/TDD mode and headphone.
TTY + Talk — Enables TTY/TDD mode and microphone.
TTY Full — Enables TTY/TDD mode.
2. Press to return to the Setup menu.
Version
Version lets you view the PRL (Preferred Roaming List),
software version, hardware version, and ERI (Extended
Roaming Indicator) of your phone. This information is
useful if you need to contact Customer Service.
1. In standby mode, press the Menu (left) soft key ( ),
then press
(for Setup) and
for Version. Your
phone’s hardware and software information appears in
the display.
2. Press to return to the Setup menu.
Section 9: Changing Your Settings
129
130
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of
the scientific literature related to the biological effects of
RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/ kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/ kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
132
Health and Safety Information
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. For body worn
operation, this phone has been tested and meets FCC
RF exposure guidelines when used with an accessory
that contains no metal and that positions the handset a
minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model
phone as reported to the FCC are:
• Head:1.30 W/Kg.
• Body-worn: 0.943 W/Kg.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/ oet/ fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is
Section 10: Health and Safety Information
133
usually printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/ cgb/ sar.
UL Certified Travel Adaptor
The Travel Adaptor for this phone has met UL 1310
safety requirements. Please adhere to the following
safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS
OUTLINED MAY LEAD TO SERIOUS PERSONAL
INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE
U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
134
Consumer Information on Wireless Phones
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
"cell," "mobile," or "PCS" phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head. These
RF exposures are limited by Federal Communications
Commission safety guidelines that were developed
with the advice of FDA and other federal health and
safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's
compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using wireless
phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low
Section 10: Health and Safety Information
135
levels of radio frequency energy (RF) in the microwave
range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels
of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many
studies of low level RF exposures have not found any
biological effects. Some studies have suggested that
some biological effects may occur, but such findings
have not been confirmed by additional research. In
some cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to
emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
136
Consumer Information on Wireless Phones
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health
agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Section 10: Health and Safety Information
137
Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated
in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals.
However, many of the studies that showed increased
tumor development used animals that had been
genetically engineered or treated with cancer-causing
chemicals so as to be pre-disposed to develop cancer in
absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These
conditions are not similar to the conditions under
which people use wireless phones, so we don't know
with certainty what the results of such studies mean for
human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
138
Consumer Information on Wireless Phones
about long-term exposures, since the average period of
phone use in these studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This
is because the interval between the time of exposure to
a cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation
of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day
use of wireless phones. Many factors affect this
measurement, such as the angle at which the phone is
held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
Section 10: Health and Safety Information
139
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the context
of the latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point
we do not know that there is - it is probably very small.
But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is
a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless
phone will reduce RF exposure.
140
Consumer Information on Wireless Phones
• "If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce your
RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was
not based on scientific evidence that any health hazard
exists.
Section 10: Health and Safety Information
141
Dohands-freekitsforwirelessphonesreducerisksfrom
exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have
shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the
phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In
142
Consumer Information on Wireless Phones
February 2002, the Federal trade Commission (FTC)
charged two companies that sold devices that claimed
to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a
joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored
by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Section 10: Health and Safety Information
143
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and work
to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
144
Road Safety
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
Section 10: Health and Safety Information
145
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone
safely when driving."
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
146
Operating Environment
Operating Environment
• Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to
use it, or when it may cause interference or danger. When
connecting the phone or any accessory to another device, read
its user's guide for detailed safety instructions. Do not connect
incompatible products.
• As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
UsingYourPhoneNearOtherElectronicDevices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Section 10: Health and Safety Information
147
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and phones also vary in the amount
of interference they generate.
The wireless telephone industry has developed ratings
for some of their mobile phones, to assist hearing
device users in finding phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their box
or a label on the box.
The ratings are not guarantees. Results will vary
depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal
needs.
148
Using Your Phone Near Other Electronic Devices
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4
is the better/ higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/ higher
of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Hearing devices may also be measured for immunity to
this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
Section 10: Health and Safety Information
149
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices requireyou to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below
deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as
propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
150
Emergency Calls
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate
signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network
services and/ or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
Section 10: Health and Safety Information
151
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play with it because they could hurt
themselves and others, damage the phone or make calls
that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority
to operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
152
Other Important Safety Information
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping,
hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone informs
Section 10: Health and Safety Information
153
you of the current signal strength by displaying a
number of bars next to the signal strength icon. The
more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself
by pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level.
This power can range from 0.006 watts to 0.2 watts in
digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
154
Availability of Various Features/Ring Tones
• If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your
shoulder.
• Do not hold, bend or twist the phone's antenna.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/ or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
Section 10: Health and Safety Information
155
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
156
Battery Precautions
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact
with metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Section 10: Health and Safety Information
157
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• If your phone has an external antenna, use only the supplied or
an approved replacement antenna. Unauthorized antennas or
158
Care and Maintenance
modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 10: Health and Safety Information
159
160
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
(“SAMSUNG”) warrants to the original purchaser
(“Purchaser”) that SAMSUNG's Phones and accessories
(“Products”) are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period of time
after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
Other Phone Accessories 1 Year
What is Not Covered? This Limited Warranty is
conditioned upon proper use of Product by Purchaser.
This Limited Warranty does not cover: (a) defects or
damage resulting from accident, misuse, abuse, neglect,
unusual physical, electrical or electromechanical stress,
or modification of any part of Product, including
antenna, or cosmetic damage; (b) equipment that has
the serial number removed or made illegible; (c) any
plastic surfaces or other externally exposed parts that
are scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/
peripheral equipment not furnished or approved by
162
Standard Limited Warranty
SAMSUNG; (e) defects or damage from improper
testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery
has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii)
any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used
in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility
in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number
of Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call
Samsung Customer Care at 1-888-987-4357. Upon
receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's
sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace
Product with a rebuilt, reconditioned or new Product.
Repaired/ replaced leather cases, pouches and holsters
Section 11: Warranty Information
163
will be warranted for a period of ninety (90) days. All
other repaired/ replaced Product will be warranted for
a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components,
boards and equipment shall become the property of
SAMSUNG. If SAMSUNG determines that any Product
is not covered by this Limited Warranty, Purchaser
must pay all parts, shipping, and labor charges for the
repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED HEREIN, PURCHASER
TAKES THE PRODUCT “AS IS,” AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, OF ANY
KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT, INCLUDING BUT NOT LIMITED TO:
• “THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• “WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• “DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• “THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• “COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND
164
Standard Limited Warranty
WHATSOEVER WITH RESPECT TO THE PRODUCT.
ALL IMPLIED WARRANTIES AND CONDITIONS
THAT MAY ARISE BY OPERATION OF LAW,
INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/ PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR
INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR
FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/ PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY
Section 11: Warranty Information
165
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE/ PROVINCE TO PROVINCE. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES,
166
Standard Limited Warranty
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should
not be relied upon.
Samsung Telecommunications America, L.P.
1000 Klein Street
Plano, Texas 75074
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2006 Samsung Telecommunications America, L.P. All
rights reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Printed in Korea
Section 11: Warranty Information
167
168
open 62
Index
Creating and Sending New
Messages 78
D
Display
Numerics
1X protocol icon 23
A
pixels 18
screen icons 23
Adjust
E
ringer setting 28
Alarm clock
icon 24
Changing the Text Entry
Mode 58
B
Backup to last menu 48
Battery
Entering Upper and Lower
charging 12
indicator 13
removing 11
strength icon 24
F
C
G
Understanding this User
Manual 10
Call Functions
Making a Call—Number
Making a Call—Speed
H
Health and Safety
Information 131
Making a Call—Voice
169
Messaging 77
I
Icons
battery strength 24
display 23
in use 23
signal strength 23
silent mode 24
In use icon 23
Indicator
battery strength 24
new message 23
no service 23
Mode
call answer 26
input 26
roaming 23
signal strength 23
vibrate mode 24
silent 28
standby 27
Input mode 26
In-use menu 49
L
Lock mode 27
M
vibrate 28
N
P
Phone Modes 41
Menu shortcuts 48
Inbox 82
Messages and Lock Mode 85
170
U
Understanding Your
R
Adding a New Contact
Editing an Existing Contact
S
Finding My Phone
Number 76
Memory 76
Pauses 64
Silent mode
entering 28
exiting 28
V
Voice dial
erase name 117
record a name 116
set active 118
tips 115
Standard Limited Warranty
Standard Limited
T
Voice kit
menu 115
voice setting 118
description 10
171
|