SCH-R640
P O R T A B L E
B A N D
D U A L -
M O B I L E P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Samsung Telecommunications America
(STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
Richardson, TX 75082
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel:
1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2011 Samsung Telecommunications America, LLC is a registered
trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS
System (Automated Response System) at:
®
Nuance , VSuite™, and the Nuance logo are trademarks or
registered trademarks of Nuance Communications, Inc. or its
affiliates in the United States and/or other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and
combination mark (Bluetooth word mark and “B Design”) are
registered trademarks and are wholly owned by the Bluetooth SIG.
™
™
microSD , microSDHC , and the microSD logo are Trademarks of
the SD Card Association.
Open Source Software
Some software components of this product incorporate source code
covered under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), OpenSSL License, BSD License and
other open source licenses. To obtain the source code covered under
the open source licenses, please visit:
.
Disclaimer of Warranties; Exclusion of
Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON
THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES
NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY
OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT
PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR
IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR
USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
1
2
3
Section 12: Health and Safety Information ..........178
Exposure to Radio Frequency (RF) Signals ...................... 178
Specific Absorption Rate (SAR) Certification
Information ................................................................ 187
Smart Practices While Driving ........................................ 190
Battery Use and Safety ................................................... 192
Samsung Mobile Products and Recycling ....................... 195
UL Certified Travel Charger ............................................ 197
Display / Touch-Screen .................................................. 198
GPS & AGPS ................................................................... 199
Emergency Calls ............................................................ 201
Care and Maintenance ................................................... 203
Responsible Listening .................................................... 205
Operating Environment ................................................... 209
FCC Hearing Aid Compatibility (HAC) Regulations
for Wireless Devices .................................................. 212
Restricting Children's Access to Your
Mobile Device ............................................................ 215
FCC Notice and Cautions ................................................ 215
Other Important Safety Information ................................. 216
4
Section 13: Warranty Information ....................... 217
Standard Limited Warranty .............................................217
End User License Agreement for Software ......................224
5
Section 1: Getting Started
This section explains how to start using your SCH-R640 phone by
activating your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Understanding this User Manual
The chapters of this manual generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 234.
Also included is important safety information that you should know
before using your phone. Most of this information is near the back of
the guide, beginning on page 178.
Notes and Tips
Throughout this manual some text is set apart from the rest. In this
way, important information, quick methods for activating features, to
define terms, and more are emphasized. The definitions for these
methods are as follows:
•
•
•
Notes: Explain alternative options within the current feature, menu, or sub-
menu.
Tips: Provide quick or innovative methods for performing functions related
to the subject at hand.
Important: Points out important information about the current feature that
could affect performance, or even damage your phone.
Getting Started
6
Text Conventions
This manual provides condensed information about how to use your
phone. To make this possible, the following terms and icon display in
place of repeatedly-used procedural steps:
select
Tap a menu item or screen item to launch, access, or
save a highlighted menu item or screen field of
interest.
➔
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings
➔
Call Settings
➔
Answer Options...”
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use of
other accessories may invalidate your warranty and may cause
damage.
7
Use the Travel Adapter
The travel adapter included with your phone is a convenient, light-
weight charger that rapidly charges your phone from any 120/220
VAC outlet.
1. Plug the Travel Adapter’s Charging Head into a standard 120
VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North America,
you must use an adaptor of the proper configuration for the power
outlet. Use of the wrong adapter could damage your phone and void
your warranty.
Getting Started
8
3. Insert the smaller end of the Travel Adapter into the charger/
accessory connector on the bottom, middle portion of your
phone.
Incorrect
Correct
Warning!: Your touch screen responds best to a light touch from the pad of your
finger. Using excessive force when pressing on the touch screen may
Important!: You must unplug the adapter before removing the battery from the
phone during charging to avoid damage.
9
Low battery indicator
The battery indicator (
) in the upper-right corner of the display
indicates power level. Monitor the battery strength and ensure your
battery is adequately charged.
•
•
•
Five bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
A blinking empty battery icon (
) and a tone sounding indicate you have
two to three minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone
will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this guide
to fully understand the services your phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable standard
Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your phone,
otherwise you could damage the battery. From fully discharged to fully
charged, the battery requires up to 4 hours of charge time.
Getting Started
10
1. If needed, lay the phone face down and insert a small object or
thumbnail into the slot at the top of the battery cover (1) and
gently pry it away from the phone. Then, lift the cover away
from the phone (2).
2. First, insert the top end of the battery (1), matching the gold
contacts on the battery to those on the inside of the phone.
11
3. Press lightly on the bottom end of the battery (2) down into the
phone until it slips into place.
4. Place the bottom end of the battery cover over the battery (1)
and press the battery cover down into place (2).
Getting Started
12
3. Lift the battery up (1) and away (2) from the phone, bottom
end first.
Turn Your Phone On
1. Press and hold the Power key (
), on the bottom right of
the phone.
Note: As with any other radio-transmitting device, do not touch the antenna (at
the bottom of the device) while using your phone as this can affect call
quality and can cause the phone to operate at a higher power level than is
necessary.
2. The phone begins searching for a network signal.
3. Once the phone finds a signal, the time, date, and day display
in the second line of the screen.
4. You’re now ready to place and receive calls.
Getting Started
14
Note: If you are outside of your carrier’s coverage or roaming area, the No Service
icon (
) displays at the top of the phone’s screen. If you cannot place or
receive calls, try later when service is available, or at another location.
Turn Your Phone Off
ᮣ
Press and hold the End key (
), on the bottom right of the
phone, for two or more seconds. Your phone powers off.
Note: If your phone is on and you press
for less than one second, the phone
does not power off. This prevents your phone from accidentally being
turned off.
15
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the Voicemail
folder (under the Message menu) to view details of voice messages in your
Voicemail box.
To dial Voicemail:
1. In Standby mode, press the Dialer soft key. The Dialer screen
displays.
2. Press and hold
or dial your own mobile number and
press
3. Follow the prompts in the new user tutorial to setup your voice
mail box.
Getting Started
16
Listen to Voicemail
1. In Standby mode, press the Dialer soft key.
2. Press and hold
(or dial your own mobile number and
press
3. You are prompted to enter your password.
Storage Card (Optional)
You can install a microSD or microSDHC Storage Card to provide
additional memory for storing files (such as, music/sound files and
photos) in your phone.
TM
TM
This device can use up to a 16GB memory card.
Note: You must install a storage card in order to use the Music Player.
17
Install a Memory Card
2. Hold the card with the label facing up and the gold contacts of
the card facing down, as shown, then carefully slide the
memory card into the memory card slot until you feel it click
into place.
Correct
Incorrect
Tip: Memory Cards written to and/or formatted by other devices are likely to slow
your phone’s response to commands and produce other unwanted results. It
is best to format a used microSD Memory Card after inserting it in your
3. Replace the battery cover.
Getting Started
18
Remove a Memory Card
2. Carefully press the memory card inward until you feel it
release.
3. Slowly release your pressure on the card. The card slides out of
the slot a short distance.
4. Remove the memory card from the memory card slot.
5. If desired, install another memory card and replace the battery
19
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Features of Your Phone
•
•
•
•
•
•
•
•
•
•
•
•
•
Full-screen Touch Screen [high-resolution] 2.8” Touch QVGA TFT, color
Widget menu
Messaging (Text and Picture) with sliding QWERTY Keypad
Built-in 1.3 Megapixel Digital Camera
High speed (1x) data
Bluetooth® Stereo (v2.1) Wireless Technology (see Note)
Global Positioning (GPS E911) Technology
PIM Functions
Voice and Touch Keypad Dial
Music (MP3) Player
Memory Card slot (for optional microSD™ cards up to 16 GB)
Voice Recognition
Speakerphone
Note: The SCH-R640 supports the wireless handsfree profile and the serial port
profile for Bluetooth® wireless technology. The SCH-R640 does not support
Bluetooth OBEX profiles.
Understanding Your Phone
20
Front View of the Phone
1. Earpiece: Allows you to
hear other parties to calls,
music, and tones.
1
2
2. Display: Indicates the
status of your phone
(including numbers dialed,
feature and function
screens, status icons,
message indicators and
contents, signal strength,
and so on) and shows all
touch controls (hot buttons,
keypads, and menus).
3
3. Send Key: Allows you to
place or receive a call. In
Standby mode, press the
key once to access the
Recent Calls log.
5
4
4. Clear Key: Deletes characters from the display when you are in
text entry mode. Press this key to return to the previous menu
or screen when navigating features on your phone.
5. Power On-Off/End Key: Turns the power on and off. Ends a call.
Returns you to Standby mode from any feature, function, or
menu.
21
Side Views of the Phone
1
2
7
6
3
4
5
1. Headset Connector: Used to connect a headset or TTY device
2. Strap holder: Allows you to attach an optional carrying strap
(not included).
3. Volume Key: Allows you to adjust the ring volume in Standby
mode, adjust the voice volume during a call, or mute the ringer
during an incoming call.
Understanding Your Phone
22
4. Power / USB Connector: Used to connect charging accessories
or any available USB cables to your phone.
5. Microphone: Lets the other caller hear you clearly when you are
speaking to them.
6. Camera Key: Launches the Camera feature of your phone and
7. LOCK Key: Locks and unlocks the keys and the touch screen
and lights the backlight.
Camera View of the Phone
3
1
2
1. Camera Lens: The lens of your built-in camera.
2. Battery Cover: Allows you to access your phone’s battery.
23
3. Speaker Grill: Allows you to hear ringing and alert tones,
alarm tones, and the other parties to calls.
Open View (Front) of the Phone
12
1
2
11
10
9
8
3
4
5
6
7
Open the QWERTY keypad by sliding the lower half of the phone to
the left.
1. Earpiece: Allows you to hear other parties to calls, music, and
tones.
2. Display: Indicates the status of your phone, including numbers
dialed, feature and function screens, status icons, message
indicators, signal strength, and so on.
Understanding Your Phone
24
3. Fn Key: Text Function Key — Toggles text entry mode between
Fn, Fn (locked) and abc modes.
4. Shift Key: Toggles ABC mode capitalization between ABC, Abc,
and abc.
5. Space Key: Inserts a space character in a text entry.
6. OK Key: When navigating through a menu accepts the
highlighted choice in a menu.
7. Arrow (Navigation) Keys: In Menu mode, Left and Right arrow
keys page from Main menu to Main menu; while Up and Down
arrow keys scroll through the menu options.
8. Return Key: In text entry mode, creates a new paragraph
(inserts a line return).
9. Back / Clear Key: Deletes characters from the display when
you are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
10. Send Key: Allows you to place or receive a call. In Standby
mode, press the key once to access the recent call log.
11. Back / Clear Key: Deletes characters from the display when
you are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
25
12. Power On-Off/End Key: Ends a call. When you press and hold
the key, the power goes On or Off. When you receive an
incoming call, press to send the call to voicemail.
Understanding the Display Screen
1. The top line of your phone’s
1
display contains icons that
indicate network status,
2
3
battery power, signal
strength, connection type,
and more.
4
2. Tapping this icon opens the
Widget Tray and displays
available widgets.
3. These virtual lamps
5
indicate which Home
screen is currently displayed. The sample screen indicates
Home screen 1 is displayed.
4. The center portion of the screen displays Widgets and
information such as call progress information, messages, and
photos.
5. The bottom line of the screen displays available soft keys. The
sample screen displays the following soft keys:
• Dialer: Launches the Dialer screen that allows you to place calls.
• Contacts: Launches the Contacts list screen.
Understanding Your Phone
26
• Messaging: Launches the Messaging screen.
• Menu: Launches panel one of the Main Menu
.
With the QWERTY keypad open,
the display rotates
automatically from portrait
mode (as previously displayed)
to landscape mode (right).
Display Screen Icons
Your SCH-R640 phone can
display definitions of the icons that display on the top line of the
screen.
To access the Icon Glossary:
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Phone Info ➔
Icon Glossary. A scrollable list of icons and their definitions
displays on the screen.
27
Using the Widget Tray
The Widget Tray contains Widget icons that, when tapped, display on
one of the two Home screen panels.
1. In Standby mode, select one of
the two Home screen panels by
swiping your finger horizontally
across the display.
2. Tap the Widget icon in the upper,
left corner of the Home screen to
open the Widget Tray.
The Widget Tray displays at the
bottom of the Home screen and
lists icons for those Widgets
selected in the Widget settings.
Tip: You can hide or display individual widgets by changing the Widgets settings.
3. Swipe left or right to scroll through the Widget icons until the
desired Widget icon displays.
Understanding Your Phone
28
4. Tap the desired Widget icon to
copy the corresponding Widget
onto the Home screen panel.
Press and drag the Widget to the
desired position to re-position the
Widget on the Home screen
panel.
5. Once on the Home screen, you
can tap a Widget to launch its
function.
Tip: Press and drag the Widget over the Widget Tray to remove it from the Home
screen panel.
Tap the Widget icon or press
to close the Widget Tray.
29
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn of
situations such as low battery. Dialogue boxes and their definitions
are outlined below.
•
•
•
•
•
•
•
Choice
–
Example: “Save Message?”
Reconfirm
–
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
–
–
–
–
Example: “System Error!”
Warning
–
Example: “Low Battery,” “Memory Full!”
Understanding Your Phone
30
Backlights
Backlights illuminate the display and the keypad. When you press any
key or open the phone, the backlights turn on. The backlight turns off
if there is no key press activity within a defined period of time (set in
the Backlight menu).
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight setting.
Menu Navigation
Like the Home screen, the Main Menu
has two panels.
To access your phone’s menus, tap the
Menu soft key, other soft keys, or icons
on the Widget Tray or Shortcuts screen.
1. In Standby mode, tap the Menu
soft key. Main Menu panel one
displays on the screen.
2. Swipe horizontally across the
screen to view the other Main Menu panels.
3. Tap the appropriate icon to to access a menu, sub-menu, or
application named in the display.
31
Return to the Previous Menu
ᮣ
Press
to return to the previous menu.
Learning More About Your Phone
Your R640 phone contains tutorials about a number of its features. To
access your phone’s tutorials, do the following:
1. From a Home screen panel, tap the Widget icon. The Widget
Tray displays on the screen. (For more information, refer to
2. Tap the Tutorial Widget (
) to copy the widget to the Home
screen.
3. From the Home screen, tap
are available:
. The following tutorials
• Physical Keys
• Widget Tray
• Adjusting Volume
• Making a Call
• Contacts
• Camera
• Music Player
• Widget and Menu
• Zooming
4. Select the desired tutorial.
Understanding Your Phone
32
Entering Text
Your phone has a QWERTY (
)
keypad to support quick and easy text input. You can enter text as you
would when using a computer keyboard.
The keys are labeled with a letter on the lower half and a number or
symbol on the upper half. Press the key corresponding to the
character you want to enter.
In addition, you can use the following special function keys:
Press to delete characters.
Tip: You can also delete a character by pressing
.
Press to start a new line.
Press once to enter a single Initial caps letter (Abc).
In Abc mode, press once to select CAPS LOCK (ABC).
Press once more to remove CAPS LOCK (abc).
Press to toggle entry mode between Abc, Fn, and Fn .
Tip: Tap the Symbols button to use symbols.
33
Press to insert a space in a text entry.
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except the
key or
key, or by pressing only the
key. (For more
Input mode
Input mode determines how you enter text, numbers, and symbols.
Optional input modes are abc, Abc, ABC, Fn (symbols), and Fn
(symbols locked). While at any text entry screen:
•
•
Tap
to toggle between abc and Abc and ABC
to toggle between Fn mode / Fn mode / Abc
.
Tap
/
ABC abc
/
mode.
Lock Modeall
When the phone is in Lock Mode, restrictions are placed on phone
use. You can receive calls and messages, but cannot place outgoing
calls (except for emergency numbers) until you unlock the phone.
Lock Mode also restricts access to menus and the volume key. Enter
the lock code when prompted to unlock the phone. (For more
Understanding Your Phone
34
Standby Mode
Standby mode is the state of the phone once it has found service and
is idle. The phone goes into Standby mode:
•
•
After you power on the phone.
When you press after a call or from within a menu.
In Standby mode, the time, day, and date as well as all phone status
icons displays.
Place Calls in Standby Mode
1. Enter a phone number, and press
.
2. Press to return to Standby mode.
Receive Messages in Standby Mode
You can receive messages in Standby mode. An alert tone sounds
and the Inbox displays the details of the message.
ᮣ
Press Reply to reply to the message, or press
to return to
Standby mode.
Talk Mode
You can place and receive calls only when your phone is on. During a
call your phone is in talk mode. Tap the Options screen button to
Speakerphone Mode
During a call, you can use your phone handsfree or share the call with
other people nearby by placing your phone in Speakerphone Mode.
35
•
To enable Speakerphone Mode:
1. Follow the prompt and unlock the screen.
2. Tap and slide the screen speaker button to the On position.
Note: Your phone automatically enters Speakerphone Mode when you dial a call
using the QWERTY keypad.
•
To disable Speakerphone Mode:
1. Follow the prompt and unlock the screen.
2. Tap and slide the screen speaker button to the Off position.
– or –
Press
to end the call.
Understanding Your Phone
36
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
•
To enter Silent Mode:
ᮣ
In Standby mode, press the Volume key (
) down until “All
Sounds Off” briefly displays on the screen and your phone
returns to Standby mode.
•
To exit Silent Mode:
ᮣ
While in Silent mode and Standby mode, press the Volume key
up until the “All Sounds Off ” is replaced in the display by the
sound settings dial and the phone returns to Standby mode.
Vibrate Mode
To enter Vibrate mode:
ᮣ
In Standby mode, do one of the following:
•
Press the Volume key down until “Vibrate Only” briefly displays on the
screen and your phone returns to Standby mode.
– or –
Tap the Dialer soft key and press and hold the
mode activated” briefly displays on the screen.
•
key until “Vibrate
Note: The Vibrate On icon (
) displays on the screen when the phone is in
Vibrate mode.
37
To return to Normal mode:
In Standby mode, do one of the following:
ᮣ
•
Press the Volume key (on the left side of the phone) Up until a Master
Volume setting other than “Vibrate Only” briefly displays on the screen.
Your phone returns to Standby mode.
– or –
Tap the Dialer soft key and press and hold the
mode activated” briefly displays on the screen.
•
key until “Normal
Adjust the Ringer
1. In Standby mode, press the Volume key up or down. Options
are:
• All Sounds Off
• Alarm Only
• Vibrate Only
• Low
• Medium Low
• Medium
• Medium High
• High
2. When you are satisfied with the setting, press the Set soft key.
Your phone returns to Standby mode.
Tip: You can also access the Master Volume setting by pressing the Menu soft
key, then selecting Settings
➔
Sounds Settings
➔
Master Volume. Use the
Volume key to adjust the ringer volume setting.
Note: The Vibrate icon (
) displays on the screen when the call ringer is set to
Vibrate Only.
Understanding Your Phone
38
Camera Mode
Camera mode allows you to activate your phone’s camera to take
pictures. In Camera mode, you can also adjust the resolution and
appearance of your pictures. (For more information, refer to
•
Entering Camera Mode: In Standby mode, press the Camera
key ( ).
Exiting Camera Mode: Press the
•
key.
39
Section 3: Call Functions
This section provides procedures for making and answering calls.
This section also describes features, such as call logs and call timers,
that help you make calls and manage your call time.
Note: Although the procedures in this section are written for the Dialer keypad,
you can also perform all of these procedures, except Plus (+) Code
(International Shortcut) Calls, using the QWERTY keypad.
Making a Call
1. In Standby mode, tap Dialer. The Dialer screen displays on the
screen. The format of the Dialer screen depends on whether
the QWERTY keypad is closed or open.
Call Functions
40
2. Enter the number you wish to call using the either the
on-screen, phone-style keypad or the QWERTY keypad.
3. Press
to place the call.
Emergency Calls
When you call the Emergency Number, 911, your R640 phone locks
itself in emergency mode, only allowing you to make calls to the
emergency call center you originally contacted. This enables
emergency operators to more easily dispatch aid, such as police, fire
fighting, and emergency medical personnel.
1. In Standby mode, tap Dialer. The Dialer screen displays on the
screen.
2. Enter 911
.
3. Press
to place the call.
Tip: If you need to make an emergency (911) call with Airplane mode enabled,
just dial 911 and press
Three-way Calling
Call two other numbers and connect them to your call using three-
way calling.
1. In Standby mode, tap Dialer. The Dialer screen displays on the
screen.
2. Enter the number for the first party in your call, then press
.
41
3. When connected, ask the other party to remain on the line.
4. Tap Dialer
5. Enter the second party’s phone number and press
.
.
6. When the second party answers, resume the conversation.
Manual Pause Calling
To manually call a number with pause(s) without storing it in your
Contacts list:
1. In Standby mode, tap Dialer. The Dialer screen displays on the
screen.
2. Enter the number you wish to call.
3. Press Options. The following pause options display on the
screen:
•
•
2-Sec Pause: A 2-second pause after which dialing resumes.
Wait: A hard pause (waits for input from you).
4. Tap the desired pause to enter it into the number sequence.
5. Press to call the number.
Tip: If you plan to call the number frequently, tap Save to store pauses along with
the number in your Contacts list.
Speed Dialing
Speed Dialing allows you to place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
Call Functions
42
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
1. In Standby mode, tap Dialer. The Dialer screen displays.
2. Press and hold the number key corresponding to the desired
Contact’s speed dial number.
Example: To speed dial the Contact assigned speed dial 5, press and hold
.
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1. In Standby mode, tap Dialer. The Dialer screen displays.
2. Tap the number key representing the first digit of the desired
Contact’s speed dial number.
3. Press and hold the number key representing the second digit of
the desired Contact’s speed dial number.
Example: To speed dial the Contact assigned speed dial 35, tap
,
.
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In Standby mode, tap Dialer. The Dialer screen displays.
2. Tap the number key representing the first digit of the desired
Contact’s speed dial number.
43
3. Tap the number key representing the second digit of the
desired Contact’s speed dial number.
4. Press and hold the number key representing the third digit of
the desired Contact’s speed dial number.
Example: To speed dial the Contacts entry assigned to speed dial 325, tap
,
,
.
Plus (+) Code Dialing
When placing international calls, you can use Plus Code Dialing to
automatically enter the international access code for your location.
Example: 011 is the code for international calls placed from the United States.
To make a call using Plus Code Dialing:
1. In Standby mode, tap Dialer. The Dialer screen displays.
2. Tap and hold * until a “+” displays on the screen.
3. Enter the country code and phone number you want calling and
press . (The access code for international calling will
automatically be dialed, followed by the country code and
phone number.)
Voice Commands
The voice recognition capabilities of your R640 are exceptional due to
advanced, speaker-independent technology. This means you do not
need to “train” your phone to understand your voice. You can use
your voice in a natural manner to dial numbers.
Call Functions
44
Note: End Calls Before relaunching the Voice Service voice recognition
software — When you use Voice Commands to make a call, you must end
that call before you can use other Voice Commands. (For more information,
Use the Call command to dial any number stored in your Contacts list
by saying the name of the contact (Name Dialing). You can also use
Call to dial any telephone number, even numbers not stored in your
contact list, by speaking the individual digits in the number (Digit
Dialing).
Voice Dialing Tips:
•
•
Wait for the beep before speaking.
Speak clearly at a normal volume, as if you were talking to someone on the
phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In Standby mode, tap Menu ➔ Voice Commands.
“Please say a command” is pronounced through the speaker.
2. Say, “Call”.
You are prompted to “Say the name or number of the person
you would like to call, or say voicemail or last number”.
3. Speak clearly and say the name of a person in your Contacts
list, first name followed by last name.
45
If the name is recognized, Voice Commands repeats the name
and dials the number.
If Voice Commands is not sure which name you said, it displays
a choice list of up to three names and prompts you with “Try
again?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name,
or use the keypad to select the correct name from the list. (For
•
Press
to exit Voice Service without dialing.
If the recognized name has multiple numbers stored for it (that
is, Mobile 1, Mobile 2, Home, and so on), Voice Commands
displays the possible choices and prompts you with “Which
location?”
5. Say or tap the number or location name.
Voice Commands dials the specified number.
Call Functions
46
Dialing a Number
To dial a number using Voice Commands, do the following:
1. In Standby mode, tap Menu ➔ Voice Commands.
“Please say a command” is pronounced through the speaker.
2. Say “Call”.
You are prompted to “Say the name or number of the person
you would like to call, or say voicemail or last number”.
3. Speak clearly and say the telephone number of the person you
want to call.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Commands repeats it and
dials the number. If Voice Commands is not sure it has
recognized the number, it displays a choice list of up to three
numbers and prompts you with “Try again?” followed by the
first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next one,
or use the keypad to select the correct number from the list.
•
•
Tap Repeat to say the number again.
Press to exit Voice Commands without dialing.
47
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the
pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains Wait(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
•
If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) displays on the screen.
•
If the caller cannot be identified, Call from unavailable # Call from
,
restricted #, or no number displays on the screen.
Tip: Assign pictures to Contacts entries. The entry’s assigned picture displays on
the screen when you receive a call from that entry. For more information,
The phone continues to notify you of the call until one of the following
events occur:
•
•
•
You answer the call.
The calling party ends the call.
The call is sent to voicemail.
Call Functions
48
Call Notification Features
Your phone notifies you of a call in a variety of ways.
•
Eight ring volume settings: All Sounds Off
Medium Low Medium Medium High, or High
Different ring types or melodies to distinguish callers.
,
Alarm Only, Vibrate Only, Low,
,
,
.
•
•
Name display with caller ID. (If the caller’s name is programmed into your
Contacts).
•
Information about the last 90 each of incoming, missed, and outgoing calls
are automatically stored to a call log.
Set Call Ringer Volume
Call Answer
Select from two methods for answering calls. This option can be
changed in the Settings menu.
1. In Standby mode, tap Menu ➔ Settings ➔ Call Settings ➔
Answer Options.
Tip: You can also carry out this procedure using the QWERTY keypad.
The following options display on the screen:
•
•
Slide Open: Slide the phone open to answer an incoming call.
Any Key: Pressing any key on either keypad, except
or
or
tapping Quiet or Ignore & Msg answers a call.
49
•
Auto w/Handsfree: Phone automatically answers incoming calls when
connected to a Bluetooth handsfree car kit.
2. Tap the desired method(s) for answering calls. A check mark
displays in the box to the right of each option you select. (You
can select all three methods, if you wish.)
3. To de-select an option, tap it again. The check mark
disappears.
Call Waiting
If you’re on a call, your phone beeps when another call is incoming.
Contact your Wireless Carrier for availability.
1. Press
the line.
to connect and ask the calling party to remain on
2. Press
and the second caller is placed on hold and you’re
returned to the original caller.
3. Press
to alternate between calls.
Caller ID
Caller ID allows you to identify who is calling you by displaying a
caller’s number. If the caller’s name and number are stored in
Contacts, the caller’s name also displays. If you’ve assigned a picture
to the entry, the picture displays on the screen as well.
Call Functions
50
Call Block
You can prevent your number from displaying on another phone’s
caller ID screen by enabling Call Block.
1. In Standby mode, tap Dialer, then tap
,
,
.
2. Enter the number whose calls you want to block, then press
.
Silence an Incoming Ring
During an incoming call, press the Volume key (
silence the ringer.
) up or down to
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voicemail.
ᮣ
During an incoming call, tap Ignore & Msg. The incoming call
is forwarded to Voicemail.
In-Call Options
Access numerous menus and features even while in a call.
Note: If the call is disconnected while accessing an In-Call Option, the In-Call
screen disappears from the display and the phone eventually returns to
Standby mode.
While in a call, the following buttons display on the screen:
1. Dialer: Launches the Dialer screen, letting you make a three-
51
2. Bluetooth: Launches the Bluetooth screen, letting you switch
this call’s sounds from the phone’s earpiece and microphone to
3. Options: The following options
display:
• Contacts: Launches the Contact
List screen, letting you make a
three-way call with one /
another of your Contacts. (For
• Recent Calls: Launches the All calls
screen, listing the most current calls.
• Send DTMF: Sends your phone number as DTMF (Dual-Tone
Multi-Frequency) tones to the other party to the call.
• Voice Privacy: Allows you to change your phone’s current Voice Privacy
• Location: Allows you to change your phone’s current Location setting.
• Bluetooth: Launches the Bluetooth screen, letting you switch this call’s
sounds from the phone’s earpiece and microphone to a Bluetooth
Call Functions
52
4. Speakerphone: Press and slide to enable (left) / disable (right)
Speakerphone mode, letting you conduct the call handsfree or
to share the call with others. (For more information, refer to
5. Mute: Press and slide to Mute (left) / unmute (right) the phone’s
microphone.
Calls
Your phone has Call Logs that retain information about Outgoing,
Incoming, and Missed Calls. The Calls menu allows you to access
this information for future reference, to return calls, and to add new
Contacts. You can also view times for your last call and the total of all
calls.
ᮣ
In Standby mode, tap Menu, then tap Calls. A list of call logs
displays on the screen. The following sections describe these
call logs in detail.
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and
missed), briefly press
in Standby mode. The All Calls screen listing to
270 of your most recent calls displays on the screen.
Missed / Received / Dialed Calls
The last 90 missed/received/dialed calls are stored in the Dialed calls
log. Review the Dialed calls log for the time and date of a call, as well
as other information.
53
1. In Standby mode, tap Menu ➔
Calls ➔ Dialed. A list of your
dialed (outgoing) calls displays on
the screen.
555-555-5555
2. Tap and drag the list to scroll up or
down for a particular call, then tap
the call to view further
information.
The following buttons are
available:
555-222-3434
• Call: Dial this number.
• Msg.: Compose and send a message (Text / Picture) to this number.
Save: Save this number to your Contacts.
•
3. For additional options, tap
. The following options display
on the screen:
•
•
Erase: Erase the selected call from your Dialed call log.
Lock Unlock: Blocks/permits erasure of the selected call from your
Dialed call log.
/
Call Functions
54
View Timers
View the duration of your last call, total calls, and calls made during
the life of your phone using the Call timer feature.
Note: Call timer is not for billing purposes.
1. In Standby mode, tap Menu ➔ Calls ➔ View Timers.
The following information displays:
• Last Call - Displays the duration of the last call made with or received by
your phone since last being reset.
• All Calls - Displays the total number and duration of all calls made with
and received by your phone since last being reset.
• Received Calls - Displays the total number and duration of calls
received by your phone since last being reset.
• Dialed Calls - Displays the total number and duration of calls dialed by
your phone since last being reset.
• Roaming Calls - Displays the total number and duration of calls made
with or received by your phone while roaming since last being reset.
• Transmit Data - Displays the amount of Transmit data since the last
time you reset the data counters.
• Received Data - Displays the amount of Transmit data since the last
time you reset the data counters.
• Total Data - Displays the Total data transmitted or received since the last
time you reset the data counters.
• Last Reset - Shows the date and time the call timers were last reset.
55
• Lifetime Calls - Shows the total number and duration of all calls made
with and received by your phone since being activated.
• Lifetime Data Counter - Displays the Lifetime amount of data
transmitted or received.
2. Press Reset and Mark All or check to select one or more
timer(s) except Lifetime Calls and Lifetime Data Counter.
3. Press Done after you make your selections.
All Calls
The last 270 calls (missed, received, and dialed) are listed in the All
calls log. Review the All calls log for the time and date of a call, as
well as other information.
1. From the Calls menu, tap All. A list of your all calls displays on
the screen.
Tip: You can also access the All calls log from a Home screen by pressing
The following icons indicate the type of call:
Missed call
.
Received call
Dialed call
2. For additional options, tap
. The following options display
on the screen:
•
Erase: Erase one or more selected calls from your Call log.
Call Functions
56
•
Lock
/Unlock: Blocks/permits erasure of one or more selected call from
your Dialed call log.
• View Timers: Lists total time for the Last Call; numbers of calls and total
times for All Calls, Received Calls, Dialed Calls, Roaming Calls, and
Lifetime calls; and data totals for Transmit Data, Received Data, Total
Data, and Lifetime Data Counter. You can reset all but the Lifetime
counters.
3. Tap and drag the list to scroll up or
down for a particular call, then tap
the call to view further
information.
The following buttons are
available:
• Call: Dial this number.
• Msg.: Compose and send a message
(Text / Picture) to this number.
•
Detail: Displays the number and
name of the caller.
Note: A Save button is available when the number is not listed in Contacts. You
can choose an option: Add New Contact or Update Existing
.
4. For additional options, tap
. The following options display
on the screen:
•
•
Erase: Erase the selected call from your Call log.
Lock Unlock: Blocks/permits erasure of the selected call from your
Dialed call log.
/
57
Erase Logs
You can erase individual calls from the Missed, Received, Dialed, or
All call logs by doing the following:
1. From the Calls menu, tap Missed
/
Received
/
Dialed All. A
/
selected list of your calls displays on the screen.
2. Tap and drag the list to scroll up or down for a particular call,
then tap the call you wish to erase. The information for this call
displays on the screen.
3. Tap
➔
Erase.
4. “Erase entry?” displays on the screen as well as the options
Yes and No.
5. To Erase all calls, tap Yes. To keep the calls, tap No.
Erase All Calls
1. From the Calls menu, tap Missed
/
Received Dialed All. A selected
/
/
list of your calls displays on the
screen.
2. Tap
➔ Erase ➔ Erase All.
Check marks display in the check
boxes to the right of all calls.
3. Tap Done.
4. “Erase all entries?” displays on
the screen.
5. Tap Yes to erase all entries or tap No to cancel.
Call Functions
58
View Timers
View the duration of your last call, total calls, and calls made during
the life of your phone using the View Timers feature.
Note: View Timers is not for billing purposes.
1. From the Calls menu, tap View Timers. The following options
display on the screen:
•
•
Last Call: Shows the duration of your last call.
All Calls: Shows the number and total duration of all calls originated by
and made to your phone since the last erasure.
•
•
•
Received Calls: Shows the number and total duration of all calls made
to your phone since the last reset.
Dialed Calls: Shows the number and total duration of all calls originated
by your phone since the last reset.
Roaming Calls: Shows the number and total duration of all calls
originated by and made to your phone while roaming and since the last
reset.
• Transmit Data: Shows the amount of data sent by the data services on
your phone.
• Received Data: Shows the amount of data received by the data services
on your phone.
• Total Data: Shows the total amount of data sent and received by the
data services on your phone.
• Last Reset: Shows the date and time you last reset all counters (except
Lifetime Calls).
59
•
Lifetime Calls: Shows the duration of all calls on your phone since
activation (Lifetime timers cannot be reset).
• Lifetime Data Counter: Shows the total amount of data sent and
received by the data services on your phone since activation (Lifetime
data counters cannot be reset).
Reset Timers / Counters
1. From the View Timers screen,
press Reset. The Reset screen
displays on the screen.
2. To reset a particular timer or
counter, tap and drag the list to
scroll up or down for a particular
timer or counter, then tap the
timer or counter you wish to reset.
A check mark apppears in the
check box to the right of the timer
or counter.
3. Tap MarkAll to reset all timers and counters. Check marks
display in the check boxes to the right of the timers and
counters.
– or –
Tap each individual timer or counter to reset. Check marks
display in the check boxes to the right of the timers and
counters.
Call Functions
60
4. Tap Done. You are prompted to confirm the reset of the timer(s)
and/or counter(s).
5. Tap Yes to reset the timer(s) and/or counter(s).
Note: Although Total call timers and data counters can be reset, Lifetime call
timers and data counters can never be reset.
Store Numbers from Call Logs
Store numbers from your Dialed, Received, Missed, and All call logs
to Contacts.
Tip: In Standby mode, briefly press
to display the Recent Calls list. You can
then select any call in the list to save to Contacts.
1. From the Calls menu, tap Missed
/
Received
/
Dialed All. A
/
selected list of your calls displays on the screen.
2. Tap and drag the list to scroll up or down for a particular call,
then tap the the number you wish to store in Contacts. The
information for this call displays on the screen.
3. Press Save
.
4. Tap Add New Contact to add the number as a new Contacts
entry.
5. Tap Update Existing to find a Contact with which to associate
the new number.
6. Follow the prompts to store the number to Contacts.
61
Section 4: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can have
your Contacts entries sorted by name.
Contacts
Up to 1000 entries can be stored in Contacts. Each entry can have up
to four associated phone numbers and one e-mail address. Each
phone number can be up to 32 digits in length, including 2-Sec or
on page 42), and associated names can be up to 32 characters in
length. You can assign the Speed Dial numbers of your choice for
each entry. You can also mark your Contacts list as Restricted to
prevent unauthorized viewing. (For more information, refer to
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch
Dialing allow you to call numbers stored in Contacts faster.
Understanding Your Contacts
62
Launch the Contacts Menu
ᮣ
In Standby mode, tap Contacts. A list of contacts displays.
– or –
In Standby mode, press Menu ➔ Contacts.
– or –
To launch the Contacts menu using a voice command — In
Standby mode, tap Menu
➔
Voice Commands. Voice Service
prompts, “Say a command.” Say “Go to Contacts” and the
name of the contact into the microphone.
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
Dial Method
1. From a Home screen, tap Dialer
.
2. Enter the number you wish to add to your Contact List.
3. Tap Save. The following options pop-up in the display:
•
•
Add New Contact: Allows you to create a new Contacts entry.
Update Existing: Allows you to add the number you entered to an
existing Contacts entry.
• Memo: Enter this number into a text memo.
4. Tap Add New Contact.
5. Tap the number type that matches your new entry.
6. Open the QWERTY keypad.
63
7. Tap the Name field and enter a name for this contact.
8. Tap Save to save the entry.
Menu Method
1. In Standby mode, tap Contacts, then tap
.
2. Open the QWERTY keypad.
4. Tap a number type to associate with this contact and enter a
phone number.
5. Tap Save to save the entry.
Finding a Contacts Entry
Menu Method
If you’ve stored a name entry in Contacts, the Contact List allows you
to find it quickly.
1. In Standby mode, tap Contacts
.
The Contact List screen displays on the screen displaying the
first few names in your Contacts list.
2. Open the QWERTY keypad and enter a name as entered in
Contacts.
Example: If you saved the name as “Amy Smith”, begin the search by pressing
(for “A”).
Understanding Your Contacts
64
As you enter letters, the names of the closest matches display
on the screen.
Tip: You can also touch the letter A on the Contacts List slider (left side of the
screen), or touch and drag for all the letters of the alphabet.
3. When the desired entry lists in the display, tap the Contact to
view the information.
– or –
4. Tap one of the following options:
•
•
Tap
Tap
to dial the number associated with the name.
for the following options:
–
–
–
Call: Dial the number associated with the name.
New Text Message: Send a New Text Message to this Contact.
New Picture Message: Send a New Picture Message to this Contact.
•
Tap
for the following options:
–
–
Set Speed Dial: Assign a Speed Dial number to this Contact.
Send Name Card Via Bluetooth: Send a copy of this Contacts entry to
another Bluetooth device.
– or –
Tap Edit to add or change information for this entry.
Voice Method
Use the Voice Service Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
65
Note: The Contacts command does not dial phone numbers for a Contact.
To look up information for a specific Contact:
1. In Standby mode, tap Menu
➔
Voice Commands. “Say a
Command” displays on the screen and plays through the
speaker.
2. Say “Contacts”.
Voice Service prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want to
call, exactly as it is entered in your Contacts list.
•
If Voice Service recognizes the name you said, the contact information
displays on the screen.
•
If Voice Service does not recognize the name you said, a choice list of up
to three names displays on the screen, and Voice Service prompts you
with “Try again?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name,
or use the keypad to select the correct name from the list. (For
•
To say the name again, tap Repeat.
5. The contact information for the name you selected displays on
the screen.
•
Tap
for the following options:
–
Set Speed Dial: Assign a Speed Dial number to this Contact.
Understanding Your Contacts
66
–
–
Set Default Number: Select a number to display as the default number.
Displays only when there are multiple number entries for a contact.
Send Name Card Via Bluetooth: Send a copy of this Contacts entry to
another Bluetooth device.
– or –
Tap Edit to add or change information for this entry.
Editing a Contacts Entry
Editing Contacts Name and Numbers
2. Tap the desired Contact. The selected Contact’s information
displays on the screen.
3. Scroll up or down to review the information for the Contact that
you wish to change, then tap Edit. The Edit Contact screen
displays on the screen.
4. Open the QWERTY keypad and tap the particular information
you want to add or change.
•
•
Press
to backspace and delete numbers or letters.
Press and hold
field.
to clear all numbers or letters in the highlighted
•
Tap Options. The following options display:
Set Speed Dial Remove speed dial: Assign/remove a speed dial number
–
/
67
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often require a
password or account number. Instead of manually entering these
numbers, you can store them in a Contacts entry with the phone
number and with special characters called pauses, up to a maximum
of 32 digits.
•
2-Sec Pause: Stops the calling sequence for two seconds, then sends the
remaining digits.
•
Wait: Stops the calling sequence until the phone receives further input.
Note: You can enter multiple Waits to extend the length of a pause. For example,
two consecutive Waits cause a total pause time of four seconds. Keep in
mind that pauses count as digits towards the 32-digit maximum.
To add pauses:
1. Find the Contacts entry associated with the number you want
3. Tap Options. The following pause options display on the
screen:
•
Set Speed Dial Remove speed dial: Assign/remove a speed dial
/
2-Sec Pause: A 2-second pause after which dialing resumes.
Wait: A hard pause (waits for input from you).
•
•
69
4. Select the pause option of your choice to it into the number
sequence.
5. Tap Save to store the number to Contacts.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
recall the number from Contacts, and press
number.
to dial the
2. If you stored the number using Wait(s), recall the number from
Contacts, press to dial the number, then wait for the
appropriate prompt from the dialed number.
3. Enter a response to the prompt and press
to send the
digits you entered.
Edit an Existing Email Address
2. Tap the desired Contacts entry, then tap Edit.
The Edit Contact screen displays on the screen.
3. Open the QWERTY keypad, then tap the Personal Email address
field.
5. Tap Save to save your changes.
Understanding Your Contacts
70
Assigning a Picture to a Contacts Entry
When you assign a picture to a Contacts entry, the picture that you
assigned to the entry displays on the screen when you receive a call
from that Contact.
2. Tap the desired Contact, then tap Edit. The Edit Contact
screen displays on the screen.
3. Tap the Picture field and select one of the following options
from the pop-up display:
• Pictures: To select an existing photo.
• Camera: To take a new photo.
When you tap Pictures, the Pictures screen displays on the
screen, showing a series of thumbnail photos. (For more
4. Tap the picture that you wish to assign to the Contacts entry,
then tap Set. The Edit Contact screen displays on the screen with
a thumbnail view of the selected image in the Picture ID field.
– or –
If there are no pictures, or if you cannot find an appropriate
picture, tap Camera. The camera viewfinder screen displays
on the screen with Resolution set to 1024x768
.
•
Press the Camera key. The new picture displays on the screen.
71
•
Tap Set. The Edit Contact screen displays on the screen with a
thumbnail view of the selected image in the Picture ID field.
5. Tap Save to save the picture assignment to the selected
Contacts entry.
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays the
ringtone that you assigned to the entry when you receive a call from
that Contact instead of the ringtone currently assigned to Voice Calls.
2. Tap the desired Contact, then tap Edit. The Edit Contact
screen displays on the screen.
3. Tap the Ringtone field. The Ringtones screen displays on the
screen.
4. Tap the ringtone, sound file, or music file that you wish to
assign to the Contacts entry. The Edit Contact screen displays
on the screen with the name of the selected file in the Ringtone
field.
5. Tap Save to save the ringer assignment to the selected
Contacts entry.
Understanding Your Contacts
72
Deleting a Contacts Entry
1. In Standby Mode, tap Contacts ➔
. The Erase screen
displays on the screen.
2. Scroll to and tap the Contact you want to erase. A check mark
displays in the box to the right of the Contact.
– or –
Tap Mark All to mark all contacts for erasure.
3. Tap Done. The phone prompts you to confirm the erasure.
4. Tap Yes to confirm erasure of the selected Contact or tap No to
retain the Contact.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note: If the call was incoming and Caller ID information was unavailable, then the
Save option is also unavailable.
1. Press
to end your call. The call time, length of call, phone
number, and name of the party (if available) display on the
screen.
2. Tap Save. The following options display on the screen:
•
•
Add New Contact: Allows you to create a new Contacts entry.
Update Existing: Allows you to add the number you entered to an
existing Contacts entry.
73
3. Follow the instructions in the upcoming sections depending on
whether the number is a new entry or you wish to add it to an
existing entry.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press and hold to speed dial one of that entry’s numbers.
For example:
•
•
•
To speed dial the Contacts entry assigned to Location 5, tap Dialer, then
press and hold , (1-touch dialing).
To speed dial the Contacts entry assigned to Location 35, tap
press and hold , (2-touch dialing).
To speed dial the Contacts entry assigned to Location 235, tap
, then press and hold (3-touch dialing).
then
, tap
You can assign one or more Speed Dial numbers to a Contacts entry
during new entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number, do
the following:
1. Follow either of the New Contacts entry procedures (see
name for the entry.
2. After entering the Contacts entry name, do not press Save
.
Open the QWERTY keypad and tap the number field.
Understanding Your Contacts
74
3. Tap Options ➔ Set Speed Dial. The Set Speed Dial screen
displays on the screen.
4. Tap an Unassigned Speed Dial number.
– or –
Tap the Search field, enter a Speed Dial number, then tap the
desired Unassigned Speed Dial number.
Important!: Do not enter Speed Dial numbers 1, 311, 411, 611, 711, or 911.
These numbers are already assigned to particular network functions,
such as Voicemail (001) and emergency use (911).
You are prompted to confirm your Speed Dial number
assignment.
5. Tap Yes to save your Speed Dial assignment and return to the
Add New Entry screen.
Note: Tap No to discard the assignment and return to the Speed Dial screen.
6. Tap Save to save your changes.
Changing a Speed Dial Location
2. Tap the desired Contact.
3. Open the QWERTY keypad.
4. Tap
➔ Remove Speed Dial. The Remove speed dial?
screen displays. Tap Yes or No to confirm.
75
5. Tap Yes to remove your speed dial setting. Speed dial removed
displays and you are returned to the Edit screen.
Contacts Groups
Contact Groups let you easily send messages to multiple, selected
Contacts. You can also use Groups to find Contact entries and to add/
remove Contacts names in a Group or to create or rename a Group.
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
To add a Contact to a Group using either the Add New Contact option
or the Edit Contact option, do the following:
page 63 for more information) or find and edit a Contacts entry
information) that you want to add to a Group.
2. Tap the Group field. The Select Group screen displays.
3. Tap the group in which you want to assign the selected
contact, then tap Done
.
•
•
•
•
Mark All
Business
Colleague
Family
Understanding Your Contacts
76
•
Friends
The Add New Entry/Edit Contact screen and the selected
Group name populates the Group field.
4. Tap Save to save your changes.
Create a New Group
The New Group option allows you to add a new group name to the list
of Groups.
1. In Standby mode, tap Contacts.
2. Tap
, then scroll to the Group field and tap Group.
The Select Group screen displays.
3. Tap New Group, Open the QWERTY keypad and enter a new
4. Tap Done
.
Rename a Group
1. In Standby mode, tap Menu > Contacts.
2. Tap Groups, then tap
➔
Rename Group.
3. Tap the group name to rename.
Note: You can only rename a group that you created.
4. Slide open the keypad, press
to erase the current group
name, then enter a new group name and tap Done
.
77
Erase a Group
The Erase option allows you to delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
1. In Standby mode, tap Menu ➔ Contacts.
2. Tap Groups, then tap
➔
Erase Group.
The Erase Group screen displays on the screen.
3. Tap the Group you want to delete. A check mark displays in the
box to the right of the selected Group.
4. Tap Done. You are prompted to confirm the deletion.
5. To confirm erasure of the highlighted Group, tap Yes. To retain
the Group, tap No.
Memory Status
The Memory Status menu option allows you to view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
ᮣ
In Standby mode, tap Menu ➔ Contacts ➔ Memory Status.
The Memory Status screen displays the Total amount of
memory for storing Contacts, the number of Saved Contacts
and Available storage for Contacts.
Understanding Your Contacts
78
Section 5: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and functionality
associated with messaging.
Note: You can only enter message text using the QWERTY keypad.
Types of Messages
Your phone is able to send and receive Text and Picture messages to
compatible phones and devices. Text messages can be up to 160
characters in length.
Note: Available memory is shared between all messages. You can store up to 300
messages. However, the exact number is dependent upon message length.
Create and Send Text Messages
1. In Standby mode, tap Messaging
➔
New Message
➔
Text
Message. The New Text Msg screen displays.
Tip: To launch the New Txt Msg screen using a voice command — In Standby
mode, tap Menu
➔
Tools
➔
Voice Service
➔
Voice Commands. The phone
prompts, “Say a command.” Say “Send Text” into the microphone. You are
prompted to select a message type “Text or Picture”. At the prompt, say a
Contact name or a number for the first recipient of the message.
2. Slide the QWERTY keypad open.
79
3. Tap Add
➔
From Contacts
/
Recent Calls Groups, then find and
/
select a recipient for this message.
– or –
Tap New# and enter a recipient number or e-mail address.
4. Tap the Text field.
At any point while composing a message:
•
Press
to complete the message text and set message send
options. The following options display on the screen:
–
–
–
–
Save As Draft: Save the message to your Draft folder.
Insert Quick Text: Insert pre-composed text in your message.
Priority Level: Choose Urgent or Normal
.
Validity Period: Allows you to set the length of time your text messages are
stored at the message center while attempts are made to deliver them.
–
–
Deferred Delivery: Sets a delay time before the phone sends a message.
Enh. Delivery Ack: Choose On or Off — Requests confirmation when your
message is received.
To enter symbols not shown on the QWERTY keypad:
6. Tap Symbols. The Symbols menu displays on the screen.
7. Tap the desired symbol. The selected symbol appears in the
Text field.
8. Press Send once you are finished entering your message.
Messaging
80
Receive Text Messages
When you receive a message in Standby mode, the New Text
message icon displays at the top of the screen in the status bar area.
1. In Standby mode, tap Messaging
2. Tap the text message to view it.
Receive Messages While in a Call
➔
Messages.
When you receive a message while in a call, New Message displays
on the screen along with the closed envelope icon ( ). The date
and time of the message also display on the screen along with the
following options:
ᮣ
Select one of the following options:
• View Now: Opens the message, where you have the option to Reply,
Forward, Reply w.Copy, Erase, Save Quick Text, Lock/Unlock, Add To
Contacts or View Contact, Extract Addresses, or Message Info.
• ViewLater: Saves the message to your Messages folder, where you can
view it later, then returns your phone to Standby mode.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible phones
or devices. You can even accompany a Picture message with a voice
memo or preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Enter each recipient’s
address or phone number in a separate Send to field of the Picture message
composer.
81
1. In Standby mode, press the Camera key (
). The camera
viewfinder screen displays on the screen.
2. Press the Camera key (
) to take a picture. Your new
picture displays in the picture review screen.
Note: For more information about using the camera feature in your phone, see
3. Tap Send via. The Send Via menu displays on the screen.
4. Tap Picture Message. The New PIC Msg screen displays on the
screen with your new picture populating the Slide field.
5. Slide the QWERTY keypad open.
6. Tap Add
➔
From Contacts
/
Recent Calls Groups and find and
/
select a recipient for this message.
– or –
Tap New# and enter a recipient number or e-mail address.
7. Tap and slide to scroll down to, and then tap, the Text field,
then enter the message text using the keypad. (For more
To insert a sound into your Picture message:
8. Tap the Sound field then tap one of the following options:
•
Record New: Record a new memo to insert into the message.
Messaging
82
Note: You can record and insert a voice memo of up to 60 seconds in length, if
you record first before attaching a picture. If a picture is attached before
recording, the size of the voice memo is limited to the amount of remaining
memory.
• Audio files list: Select from the list of previously recorded voice memos
and preloaded audio files on your phone.
– or –
Proceed to step 9.
9. Scroll down to the Subject field and enter a subject for the
Picture message using the keypad. (For more information, refer
10. Tap
options:
to complete the message text and set message send
•
•
Preview: View the picture as the recipient will see it.
Save As Draft: Save the message to your Draft folder.
• Add Slide: Add a slide and another picture to your message.
• Priority Level: Choose Urgent Normal, or Low
,
.
• Validity Period: Allows you to set the length of time your text messages
are stored at the message center while attempts are made to deliver
them.
• Delivery Ack: Choose On or Off — Requests confirmation when your
message is received.
11. Tap Send to send the message. “Pic Msg Sending” displays
on the screen and a progress bar indicates the send status.
83
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
Tip: You can send a Picture message to up to ten recipients. Enter each recipient’s
address or phone number in a separate Send To field of the Picture message
composer.
1. In Standby mode, tap Messaging
➔
New Message
➔
Picture
Message. The New PIC Msg screen displays on the screen.
Tip: To launch the New PIC Msg screen using a voice command — In Standby
mode, tap Menu
➔
Tools
➔
Voice Service
➔
Voice Commands until the
phone prompts, “Say a command.” Say “Send Picture” into the
microphone. You are prompted to select a message type. Say “Picture”. At
the prompt, say a Contact name or a number for the first recipient of the
message.
2. Slide the QWERTY keypad open.
3. Tap Add
➔
From Contacts
/
Recent Calls Groups and find and
/
select a recipient for this message.
– or –
Tap New# and enter a recipient number or e-mail address.
4. Tap the Slide field. A photo gallery of thumbnail images
displays on the screen.
5. Tap a picture to add to your message. The selected picture
expands to fill the screen.
Messaging
84
6. Tap Attach to add the highlighted picture to your message. You
are returned to the New PIC Msg screen with the selected
picture in the Slide field.
– or –
Tap
➔
Take Picture to launch the camera. Take your
picture, then press Add to add your picture to your message.
Note: For more information about using the camera feature in your phone, see
7. Tap and slide to scroll down to, and then tap, the Text field,
then enter the message text using the keypad. (For more
To insert a sound:
8. Tap the Sound field. The Ringtones screen displays on the
screen.
9. Tap one of the following options:
•
Record New: Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length, if
you record first before attaching a picture. If a picture is attached before
recording, the size of the voice memo is limited to the amount of remaining
memory.
•
Audio files list: Select from the list of previously recorded voice memos
and preloaded audio files on your phone.
85
10. Scroll down and tap, the Subject field, then enter a subject for
the Picture message using the keypad. (For more information,
11. Tap
options:
to complete the message text and set message send
• Preview: View the picture as the recipient will see it.
• Save As Draft: Save the message to your Draft folder.
• Add Slide/Remove Slide: Add a slide and another picture to your
message. Remove a slide from your message.
• Priority Level: Choose Urgent Normal, or Low.
,
• Validity Period: Allows you to set the length of time your text messages
are stored at the message center while attempts are made to deliver
them.
• Delivery Ack: Choose On or Off — Requests confirmation when your
message is received.
12. Tap Send to send the message. “Pic Msg Sending” displays
on the screen and a progress bar indicates the send status.
Receive Picture Messages
When you receive a Picture Message in Standby mode, the Picture
Message icon displays in the status bar.
1. In Standby mode, tap Messaging
➔
Messages.
2. Tap the picture message to view it.
3. Tap the picture message again, then tap Download to
download and view the contents.
Messaging
86
Message Folders
Your phone stores messages in any one of three message boxes. The
subsections that follow describe each message box in detail.
Messages
Messages of all types (except Drafts and Voicemail) are stored in the
Messages folder.
1. In Standby mode, tap Messaging ➔ Messages. The Messages
screen displays on the screen, listing recipients and originators
of messages.
Tip: While in a call, tap Options, then select Messages ➔ Messages.
2. To manage the messages without reviewing them, tap
The following options display on the screen:
.
• Sort Alaphabetically: Sort the Messages list with Contacts in
alphabetical order followed by non-Contact numbers in numerical order.
•
•
Erase: Remove selected or all unlocked messages from the Messages
folder.
Erase All Messages: Remove all unlocked messages from the
Messages folder.
• New Message: Compose and send a new Text message, or Picture
message.
3. To view a message, select the Contact/number whose
message you wish to view. The list of messages exchanged
with that Contact/number displays on the screen.
87
4. Tap the message you wish to view. The contents of the
selected message display on the screen.
5. Tap
and select an option:
•
Forward: Send a copy of this message to another recipient.
• Reply w. Copy: Reply to this message attaching a copy of the message.
• Erase: Delete this message from the Inbox.
•
Save Picture: Picture Messages Only — Save the picture included in
this message to the Pictures folder.
•
•
•
Save Quick Text: Saves the Quick Text file.
Lock
/
Unlock: Block/permit erasure of the highlighted message.
Add To Contacts: Save the sender’s number to your Contacts.
• Extract Addresses: Extract addresses from message text and add to
Contacts.
•
•
Message Info: Shows message delivery status, sender, size, and so on.
Save Sound: Multimedia Messages Only — Save the sound file
included in this message to the Ringtones folder.
Drafts
Messages in the Drafts folder are those that have been composed but
never sent. You can return to the Drafts folder at any time to view,
edit, or send a draft message.
Create a Draft Message
1. In Standby mode, tap Messaging ➔ New Message ➔ Text
Message / Picture Message.
The New Text Msg / New PIC Msg screen displays.
Messaging
88
2. Compose your message using the touch screen and QWERTY
3. Tap
➔ Save As Draft. A confirmation message displays
on the screen and your message saves to the Drafts folder.
View and Edit Draft Text Messages
1. In Standby mode, tap Messaging
➔
Drafts. A list of any draft
messages that you’ve saved displays on the screen.
2. Highlight a text message that you wish to view or edit, then tap
Edit. The New Text Msg screen displays on the screen.
3. Enter or change the recipient’s number and/or e-mail address
4. Tap
options:
to complete the message text and set message send
• Save As Draft: Save the message to your Draft folder.
• Insert Quick Text: Insert pre-composed text in your message.
• Priority Level: Choose Urgent or Normal
.
• Validity Period: Allows you to set the length of time your text messages
are stored at the message center while attempts are made to
deliver them.
• Deferred Delivery: Sets a delay time before the phone sends
a message.
89
• Enh. Delevery Ack: Choose On or Off — Requests confirmation when
your message is received.
View and Edit Draft Pic. Messages
1. In Standby mode, tap Menu
➔
Messaging
➔
Drafts. A list of
any draft messages that you’ve saved displays on the screen.
2. Tap the picture message that you wish to view, then tap Edit.
The message edit screen displays on the screen.
3. Make any needed changes and tap
. The following options
display on the screen:
•
•
Preview: Shows the message contents.
Save As Draft: Saves the changed message to the Draft Box.
• Add Slide: Add a slide and another picture to your message.
• Remove Slide: Remove a slide from your message.
•
•
Priority Level: Choose Urgent, Normal, or Low.
Validity Period: Enter the Date when this message will cease to be
valid, then use the Left and Right navigation keys to choose the Time
.
•
Delivery Ack: Choose On or Off — Requests confirmation when your
message is received.
4. Tap an option to perform the function for that option.
5. Tap Send when you are finished.
Messaging
90
Managing Draft Messages
1. In Standby mode, tap Menu
➔
Messaging
➔
Drafts. A list of
draft messages that you saved displays on the screen.
2. Tap
and select one of the following options:
•
Sort by Recipient: List messages according to recipient name or
number.
•
•
Erase: Delete one or more selected draft messages.
Erase All Drafts: Deletes all draft messages.
Voicemail
Messages in your voice mailbox are logged in the Voicemail folder of
the Messages menu. Open the Voicemail folder to view the Callback
# (if available), Urgency, and other details of the Voicemail messages
in your voice mailbox.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the option
to either:
•
Listen Now: Calls your voice mailbox and allows you to listen to your
messages.
•
Listen Later: Returns you to Standby mode where you can later choose to
call your mailbox and review your messages.
91
Listen to Voicemail Now
When you choose to review your new voicemail message(s) right
away, your phone calls your voice mailbox so that you can listen to
Listen to Voicemail Later
If you have chosen to review your voicemail messages at a later time:
1. In Standby mode, tap Messaging
screen displays any new voicemail messages.
2. Press to call your voice mailbox and listen to the
message.
➔
Voicemail. The Voicemail
Note: From Standby mode, you can press and hold
to dial your voice
mailbox.
Erase Messages
You can erase all of the messages in each or all of your folders from
one convenient location.
Note: This function erases all messages in the selected box. To delete a single
message, open the box from the Messaging menu, then delete the
message from the Options menu while viewing the message content.
1. In Standby mode, tap Menu
➔
Messaging. The Messaging
menu displays on the screen.
Messaging
92
2. Tap
displays.
➔
Erase Messages. The Erase Messages screen
3. Tap Messages Drafts or All Messages to select the messages
,
to erase.
4. Follow the screen prompts to confirm messages to erase.
Quick Text
1. In Standby mode, tap Menu
menu displays on the screen.
2. Tap Quick Text. The Quick Text screen displays.
➔
Messaging. The Messaging
➔
3. Select from a list of pre-composed text to add to your
message.
Message Settings
Use the Msg Settings sub-menu to define settings for your text and
picture messages.
1. Standby mode, tap Messaging. The Messaging menu displays
on the screen.
2. Tap
➔
Settings and select one or more settings to change:
Normal / Chat— View messages individually,
• Message View Mode
:
or view messages to/from the same number/Contact as a “chat
session”.
•
•
Entry Mode: Choose the default method for entering text into messages
(
Xt9 Word, Abc, ABC, 123).
Auto Save Sent Msg: Configure message save settings: (Auto-Save
,
Don’t Save Prompt).
,
93
•
•
Auto Erase Received Msg (On) automatically erases received
:
messages; (Off) does not erase received messages after viewing.
Text Msg Auto View: On/Off — Set to On, the full content of a text
message displays in the received message.
• Picture Msg Download: On automatically downloads received Picture
messages.
• Voicemail Number: Edit or view your Voicemail number.
•
Callback Number: Choose whether to include a callback phone
number with your outgoing messages.
•
Signature: Choose whether to include a text signature in outgoing
message text.
Messaging
94
Section 6: Camera
Use your Samsung phone to take full color digital pictures, display
them on your phone’s vivid color display, and instantly share them
with family and friends. It’s fun, and as easy to use as a traditional
point-and-click camera. This section explains how you can do the
following:
•
•
•
Take pictures with your phone’s built-in digital Camera.
Send and receive pictures taken with your phone’s Camera.
Set the several options associated with the Camera that help you take crisp,
clear pictures.
Taking Pictures
Taking pictures with the built-in Camera is as simple as choosing a
subject, pointing the lens (located on the rear of your phone, at the
top), and pressing a button.
Taking Single Pictures
To take a single picture using the current camera settings, do the
following:
95
1. In Standby mode, press the Camera key (
). The camera
viewfinder screen displays. (For more information, refer to
Tip: You can also activate the Camera by pressing Menu, then selecting Multimedia
➔
Camera..
2. Verify that Shoot Mode is set to Single. Tap Shooting Mode
Single
➔
.
3. Using the display as a viewfinder, point the camera at
your subject.
4. Press the Camera key (
) to capture the picture.
Camera
96
5. Do one of the following:
•
Press Send via to send a copy of the photo in a Picture message to your
addressee(s) or over a Bluetooth connection.
•
Press Set as to assign the photo as a Home screen wallpaper or as a
Contact ID image.
•
•
Press Erase to erase the photo.
Press Save to save the photo to the Pictures folder.
6. To exit the Camera feature, press
.
Tip: You can change a number of the Camera’s settings to suit particular uses for
Taking Multiple-Shot Pictures
When taking pictures of moving subjects or subjects you cannot pose,
such as children and pets, the camera’s Continuous mode simplifies
the process of taking multiple pictures in quick succession. You can
also After taking multiple-shot pictures, the camera automatically
displays thumbnail or mosaic views of the pictures you have just
taken so you can select the best picture(s) and discard the rest.
1. In Standby mode, press the Camera key (
) on the right
side of the phone. The camera view finder screen displays. (For
Note: You can also activate the Camera by tapping Menu
➔
Multimedia
➔
Camera.
97
2. Tap Shooting Mode. The following options display on the
screen:
• Single: Allows you to take a single photo.
• Continuous: Allows you to take a series of 5 or 8 photos with a single
press of the Camera key (
).
• Frame: Allows you to temporarily (for this session only) apply one of the
preloaded picture frames in your phone to characterize or enhance one
or more pictures.
• Mosaic: Allows you to take a mosaic of up to 9 photos, one per press of
the Camera key (
).
3. Select Continuous, the following options display on the screen:
• 5
• 8
4. Select the desired number of shots. A Continuous progress bar
(similar to this
) or the selected Mosaic
screen (which fills with pictures as they are taken) displays on
the screen.
5. Using the display as a viewfinder, point the camera lens at your
subject.
6. Press the Camera key (
) when the image that you wish
to capture displays on the screen. The camera takes multiple
pictures in quick succession (Continuous) or one each time you
press the Camera key (
) (Mosaic), then the
multiple-photo screen displays on the screen.
Camera
98
•
•
Press Send via to send a picture in a Picture message to your
addressee(s) or over a Bluetooth connection.
Press Set as to set a picture as a Home screen wallpaper or as a
Contact ID image, .
•
•
Press Erase to discard the pictures.
Press Save to save the pictures to memory.
Note: For Continuous shooting mode, check the picture(s) that you want to save
and press Done
.
Tip: You can change a number of the Camera’s settings to suit particular uses for
Screen Layouts
Camera Screen
When you activate your
phone’s camera, the first line
of the display is reserved for
the current camera settings
and picture counter. The rest
of the screen displays a
viewfinder image of the
subject at which the camera
is pointed, flanked by option
buttons.
99
Camera Screen Buttons
1
2
8
7
6
5
3
4
1. Shooting Mode: Sets the Camera’s Shooting Mode to Single
Continuous Mosaic, or Frame
2. Resolution: Sets the camera’s Resolution to 1280x960
640x480, or 320x240
3. White Balance: Sets the White Balance to: Auto
Fluorescent, or Tungsten
4. Options: Sets the camera options, or camera settings.
Camera options: Effects Metering Quality
Camera settings: Guideline Review Shutter Sound, or Memory
5. Quick view: Displays the Pictures folder.
6. Brightness: Sets the Camera to brighten or darken your photos.
,
,
.
,
800x600,
.
,
Sunny, Cloudy,
.
,
,
.
,
,
.
Camera
100
7. Night Shot: Sets the Night Shot to On or Off
8. Timer: Sets the Camera’s Timer to automatically take one or
more photos immediately (OFF) or after 3 sec 5 sec, or 10 sec
Saving Pictures
After you’ve taken a picture, you can do any of the following:
.
,
.
•
Tap Save to save the picture.
A picture is stored in the My Images folder. These folders are part of the
phone’s memory and/or part of an optional Memory Card devoted to
storing, browsing, and viewing saved pictures. (For more information, refer
•
Tap Send via to send the picture to someone else.
•
•
Tap Set As to set the picture as Wallpaper or a Picture ID.
Tap Erase to discard the picture.
Camera Options
The Camera Options let you adjust the default camera settings to
suite available lighting, the subject of the photo, or the purpose of the
photo. To access Camera Options, do the following:
1. In Standby mode, press the Camera key (
). The camera
viewfinder screen displays on the screen.
2. Select the any of the following buttons:
101
Shooting Mode
Shooting Mode allows you to set your phone’s Camera to take a one
or more pictures, with or without colorful formats or frames, at the
touch of a key.
1. In Standby mode, press the Camera key (
2. Tap Shooting Mode
).
.
3. Tap the desired option and setting. The related icon displays
on the screen.
• Single: Allows you to take a single photo.
• Continuous: Allows you to take a series of 5 or 8 photos with a single
press of the Camera key (
).
• Frame: Allows you to temporarily (for this session only) apply one of the
preloaded picture frames in your phone to characterize or enhance one
or more pictures.
• Mosaic: Allows you to take a mosaic of up to 9 photos, one per press of
the Camera key (
).
When you press the Camera key (
), the camera takes a
single picture (Single or Frame), several pictures in rapid
succession (Continuous), or one picture after another (Mosaic).
Camera
102
Frames
Frames allows you to tempor arily apply one of the preloaded picture
frames in your phone to characterize or enhance one or more
pictures.
1. In Standby mode, press the Camera key (
).
2. Tap Shooting Mode Frame. A pop-up containing the first of
➔
three pages of available Fun Frames displays on the screen.
3. Select the Frame you wish to use. The camera screen displays
with your selected Frame in place.
When you take your next picture, the camera includes the
selected Frame in your picture.
Timer
Timer allows you to delay taking a picture long enough to let you join
others in a picture.
1. In Standby mode, press the Camera key (
).
2. Tap Timer. The following values display on the camera screen:
•
•
•
•
Off
3 sec
5 sec
10 sec
3. Select the desired Timer option. If you select 3 sec
,
5 sec, or
10 sec, the Self Timer icon displays on the camera screen.
103
When you press the Camera key (
), the countdown timer
indicates the time remaining before the camera takes the
picture.
Tip: To stop the countdown timer without resetting it, press
.
Resolution
Change the size (in bytes) of your pictures by changing the picture
resolution setting.
1. In Standby mode, press the Camera key (
).
ᮣ
Tap Resolution then select a resolution for the camera:
• 1280x960 (pixels)
• 800x600 (pixels)
• 640x480 (pixels)
• 320x240 (pixels)
Options — Camera Tab
White Balance
White Balance allows you to adjust picture quality according to
available light.
1. In Standby mode, press the Camera key (
).
2. Tap White Balance (WB). As you highlight an option the effect
that option has on the picture displays:
• Auto: The camera automatically adjusts picture quality to available light.
• Sunny: Use this setting when taking pictures in full sun.
Camera
104
• Cloudy: Use this setting when taking pictures in cloudy conditions.
• Fluorescent: Use this setting when taking pictures under
fluorescent lights.
• Tungsten: Use this setting when taking pictures under
incandescent lights.
3. Tap the desired White Balance setting then tap Save.. The
camera viewfinder screen displays with your selected White
Balance applied.
The next time you press the Camera key (
), the camera
applies the selected White Balance to your picture.
Effects
Change the look of your pictures with Effects. Choose from six
available settings such as Gray, Negative, and Sepia. The selected
color effect previews in the display before you take the picture.
1. In Standby mode, press the Camera key (
2. Tap Options Camera tab ➔ Effects
).
➔
.
3. Select the desired color effect:
Note: Choose Normal to disable Color Effects.
• Normal: Subjects and pictures display with a normal hue.
• Black & White: Subjects and pictures display in black and white.
• Sepia: Subjects and pictures display in a brownish-gray hue.
• Aqua: Subjects and pictures display in an aqua hue.
105
• Negative: Subjects and pictures display in inverted colors.
You are returned to the camera viewfinder screen.
When you take your next picture, the phone’s display previews
your subject image with the selected color effect.
Quality
You can affect how much your photo is compressed, thereby reducing
it’s overall size (not to be confused with its resolution).
1. In Standby mode, press the Camera key (
2. Tap Options Camera tab ➔Quality
3. Select one of the options: Super Fine
).
➔
.
,
Fine, or Normal. You are
returned to the camera viewfinder screen.
Night Shot
Night Shot indicates/changes whether your phone is ready to take
photos in low light:
1. In Camera mode, tap Night Shot
.
2. Select the desired option:
• Off
• On
Options — Settings Tab
Guideline
When set to On, Guideline shows a cross hatch pattern in the view
finder screen.
Camera
106
1. In Standby mode, press the Camera key (
).
2. Tap Options Settings tab ➔ Guideline and tap one of the
➔
following setttings:
• On
• Off
You are returned to the camera viewfinder screen.
Review
1. In Standby mode, press the Camera key (
2. Tap Options Settings tab ➔ Review
3. Select a review setting:
• On: Photos are displayed after you take them.
).
➔
.
• Off: Photos are not displayed after you take them. Instead, they are
automatically saved to the My Pictures folder.
You are returned to the camera viewfinder screen.
Shutter Sound
Choose from four different sounds whenever you take a picture. Aside
from being a cool sound effect, Shutter Sounds acts as an audible
reminder that your camera has taken a picture.
1. In Standby mode, press the Camera key (
2. Tap Options Settings tab ➔ Shutter Sound
).
➔
.
3. Select the preferred shutter sound:
• Off
• Shutter 1
107
• Shutter 2
• Shutter 3
You are returned to the camera viewfinder screen.
Memory
1. In Standby mode, press the Camera key (
2. Tap Options Settings tab ➔ Memory
).
➔
.
3. Select a memory location:
• Phone: Stores pictures in phone memory.
• Card: Stores pictures on an optional microSD Memory Card.
You are returned to the camera viewfinder screen.
Brightness
Brightness allows you to temporarily lighten the pictures you take.
Increasing the Brightness (-4 settings – +4 settings) lightens your
pictures (
0
is normal).
1. In Standby mode, press the Camera key (
).
2. Tap Brightness. The horizontal Brightness scale displays on the
screen.
3. To increase Brightness (brighten your picture), tap the button
+
to increase brightness or tap the
brightness (darken your picture).
-
button to decrease
The next time you press the Camera key (
), the camera
takes a lighter or darker picture according to your selected
Brightness setting.
Camera
108
Zoom
Zoom allows you to temporarily enlarge the pictures you take.
Increasing the Zoom (2 – 9) enlarges your pictures (1 is normal).
1. In Standby mode, press the Camera key (
).
2. Press the Volume key up or down. The horizontal Zoom scale
displays on the screen.
3. Press the Volume key down to Zoom in on a subject.
4. Press the Volume key up to Zoom out.
The next time you press the Camera key (
), the camera
takes an enlarged picture according to your selected Zoom
setting.
The Pictures Gallery
Saved pictures are stored in the Pictures folder. You can browse the
pictures one at a time (expanded mode), or view several pictures at
once in thumbnail format.
109
Access from Camera
1. In Standby mode, press the Camera key (
).
2. From the Camera
viewfinder screen,
press Quickview. The
last saved picture
displays on the screen.
The following options
are available:
•
Swipe across the current
image to browse pictures
in the gallery.
•
•
•
Tap Slide Show. to browse pictures in the gallery as a slide show.
Tap Edit to edit the current picture.
Tap Send via to send the current picture as a Picture Message or to
another device Via Bluetooth.
•
Tap Set As to assign the current picture as a Home screen Wallpaper or
as a Contact Picture ID.
•
•
Tap Erase to delete the current picture from the Pictures folder.
Tap Info to view Name, File Size, Resolution, Date taken, and
Time taken.
3. Select the desired option to perform its function or to enter its
sub-menu.
Camera
110
Access by Menu or from Edit Contact or New PIC Msg Screen
1. In a Home screen, tap Menu
➔
Multimedia
➔
Pictures.
– or –
In the Add New Contact Edit
/
Contact screen, tap the Picture ID
– or –
In the New PIC Msg screen, tap
Thumbnail images from the pictures that you’ve saved display
on the screen.
2. Tap
and select one of the following options:
• Take Picture: Launch the Camera to take a new picture.
• Slide Show: Play or Make a slide show.
• Send via Bluetooth: Send a copy of a selected picture to another device
over a Bluetooth connection.
• Erase: Delete one or more selected, unlocked pictures.
• Lock/Unlock: Block/permit picture erasure.
111
• Move: Move one or more selected pictures from the Card or Phone to
the Phone or Card.
• Copy: Copies the select picture To Phone or To Card (memory card).
• View by Location: List thumnail images of All stored pictures, pictures
stored in the Phone, or pictures stored on the Card.
3. Tap a picture to enlarge the view. The following options are
available:
•
•
•
Magnify (zoom in on) the picture.
Open New PIC Msg screen.
Expand the picture to full screen.
4. Tap
and select one of the
following options:
• Take Picture: Launch the Camera to
take a new picture.
• Edit: Use graphic tools to change the
picture.
• Set As: Assign this picture as a
Home screen Wallpaper or as a
Contact Picture ID.
• Erase: Delete this picture.
• Move To Card Phone: Move one or
/
more selected pictures from the Card or Phone to the Phone or Card.
• Copy To Card / Phone: Copy one or more selected pictures from the
Card or Phone to the Phone or Card.
• Lock Unlock: Block/permit picture erasure.
/
Camera
112
• Rename: Change the file name for this picture.
• File Info: View the Name, File Size, Resolution, and Date and Time this
picture was taken.
Point, Click, and Send Pictures
Take a picture and send it to anyone with a compatible device in a
few easy steps.
1. In Standby mode, press the Camera key (
). The camera
view finder screen displays.
2. Press the Camera key (
) again to take a photo. The
photo review screen displays.
3. Tap Send via
➔
Picture Message. The Picture Msg screen
displays.
5. Tap Send to send the Picture message to the intended
recipient(s).
113
Section 7: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Accessing Multimedia
1. In Standby mode, tap Menu ➔ Multimedia. The following
Multimedia options display on the screen:
•
•
Pictures: Allows you to choose the images or pictures that display in
Picture messages and on your phone’s screen. (For more information,
• Music Player: Allows you to play music (MP3 and unprotected AAC,
AAC+, WMA) files.
•
Ringtones: Allows you to assign ringtones, music files, and sound files
for calls, alarms, and other alerts. (For more information, refer to
2. Select an option to enter its sub-menu.
Using Your Music Player
Music Player allows you to play MP3 and unprotected AAC, AAC+,
WMA music files, loaded onto an optional microSD™ Memory Card
using a personal computer. (For information on loading music files on
Multimedia
114
Launching the Music Library Menu
1. From a Home screen, tap Menu
Multimedia ➔ Music Player. The
Music Player screen displays.
➔
2. To access the music files, tap
➔
Go to Library. The Library menu
displays on the screen showing
the following options:
44f128r.mp3
No Artist
• Now Playing List: Lists all music files
on the Memory Card that are playing
or queued to play.
• All Songs: Lists all music files on the
Memory Card and allows you to play individual music files or play
multiple music files by creating a temporary music playlist.
• Playlists: Lists any playlists you have saved and allows you to create,
save, and manage playlists.
• Artists: Lists artist names for music files on the Memory Card and
allows you to play one or more music files by a selected artist.
• Albums: Lists album titles for music files on the Memory Card and
allows you to play one or more music files from a selected album.
3. Tap the music file to play it.
4. Tap
to access other options:
• Go to Library: Access music files lists that show the songs Now Playing,
All Songs on your Memory Card, or all songs in Playlists or arranged
according to Artists or Albums.
115
• Play Mode: The following play modes are available:
–
–
–
–
–
Normal: Play a song or play songs in the order they display in a music file list.
Shuffle: Play music files at random.
Repeat One: Repeatedly play one music file.
Repeat All: Repeatedly play all music files.
Shuffle Repeat All: Repeatedly play all music files at random.
• Add To Playlist: Add the current file to a Playlist.
• Song Info: Lists the Title, Artist, Album, File Name, File Size, Duration,
Bit Rate, Downloaded and Copyright information, and Expired Songs of
the highlighted music file.
• Memory Info: Lists the Available card memory, the card memory
already Used to store files, and the Total memory on the card.
Multimedia
116
Music Player Controls
•
Volume key
:
–
Tap the Volume key then tap the minus or
plus signs to decrease or increase the
volume.
•
Music Navigation buttons
:
44f128r.mp3
No Artist
–
–
–
Tap Rewind to start the music file at the
beginning.
Tap Play/Pause once to play the music
file or twice to pause the music file.
Tap Foward to advance to the next music
file in the playlist.
Volume
Key
Play/
Rewind
Pause
ᮣ
Tap
➔
Go to Library
➔
Playlists to return to the selected
list and choose another music
file.
Forward
Loading Music Files
To transfer music to a microSD™ Memory Card, do the following:
1. With your phone powered off, insert the Memory Card into your
2. Power on your phone.
3. Connect your phone to a personal computer with an optional
USB data cable.
117
4. Open the Memory Card reader drive and the “Media/Music”
folder.
5. Drag or download music (MP3) files into the “Media/Music”
folder.
6. Remove the Memory Card by following the removal
instructions for the Memory Card reader and for your personal
computer.
7. Insert the Memory Card into your phone. (For more information,
Ringtones
My Ringtones allows you to assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for Contacts.
1. From a Home screen, tap Menu ➔ Multimedia ➔ Ringtones.
A list of recorded sound files, music files, and ringtones
displays on the screen.
Tip: You can also access My Ringtones from:
-A Set Alarm screen by selecting the Ringer option, highlighting the second
(file name) field, pressing the Left or Right navigation key, and selecting
Ringtones.
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
soft key, and selecting Ringtones.
2. Tap
to play a particular file.
Multimedia
118
3. Tap the file then tap one of the following options:
• Send: Send a copy of the file in a Picture message to a Contact or
other addressee.
• Set As: Assign the file as a Ringtone, a Contact ID ringer, or as an Alert
Tones.
• Rename: Allows you to rename the file.
• File Info: View the file Name, File Size, File Type, and Date and Time the
file was recorded.
Select an option.
4. Press
to return to the previous menu, or press
to
return to Standby mode.
Record New
My Sounds allows you to record voice memos and allows you to
assign preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
1. From a Home screen, tap Menu ➔ Multimedia ➔ Ringtones
➔ Record New. A list of sound files displays on the screen.
Tip: You can also access My Sounds from:
-A Set Alarm screen by selecting the Ringer option, highlighting the second
(file name) field, pressing the Left or Right navigation key, and selecting My
Sounds.
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
soft key, and selecting My Sounds.
119
2. Tap Rec to start recording.
•
•
Tap Pause. To pause the recordingt
Tap Stop To stop and save the recording.
Erasing Ringtone Files
1. From a Home screen, tap Menu ➔ Multimedia ➔ Ringtones.
2. Tap the Trash Can icon.
3. Touch the empty box next to each music file to erase, or touch
Mark All to select all music files.
4. Tap Done. You are prompted to confirm your erasure.
5. Tap Yes To erase the marked file(s).
– or –
Tap No To retain the marked file(s).
Multimedia
120
Section 8: Accessing the Web
This section explains the Brew and Browser features.
Brew
Brew allows you to browse, purchase, and download applications
online.
Important!: Charges apply when using Brew. Consult your service provider for
details.
Accessing Brew
1. To access your phone’s settings from Standby mode, tap
Menu
➔
Brew.
Important!: Charges apply, please check with your service provider for details.
2. Tap Remove if you do not want to be reminded of the charges
each time.
3. Tap Continue to accept the charges and view Brew.
Downloading Applications
This application allows you to borwse, purchase, and download
applications.
1. To access your phone’s settings from Standby mode, tap
Menu
2. Tap Catalog
121
➔
Brew
➔
Mobile Shop.
.
3. Tap You Might Like to view suggested mobile applications, or
tap Search to search for applications.
Browser
With Browser, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you launch
Browser, your phone connects to the Internet.
Stored Web Content
Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a link
to a site that was not accessed in your last session, you automatically
re-connect to the Internet.
Launching Browser
1. To access your phone’s settings from Standby mode, tap
Menu
➔
Browser.
Important!: Charges apply, please check with your service provider for details.
2. Tap Remove if you do not want to be reminded of the charges
each time.
3. Tap Continue to accept the charges and browse.
Accessing the Web
122
The Browser screen
displays. A list of categories
(each representing one or
more web sites) displays on
the screen.
4. Select the desired category,
to enter the category list.
Exit Browser
ᮣ
Press
to exit the
browser.
Using Browser
Browser presents on-screen items
in any of the following ways:
•
Text or numeric input.
Note: When entering text in a web page field, Browser limits you to using the
QWERTY touch keypad.
•
•
•
Links (embedded in content).
Numbered options (some may not be numbered).
Simple text.
You can act upon options or links by selecting them.
123
Using Links
Links have several purposes, such as jumping to a different page, to
a different site, or even initiating a phone call. Links are shown inside
of brackets ([ ]). You can normally select a link.
How Browser Buttons Work
The top of the screen contains control bars and an options icon. The
following table lists Browser buttons that display in the control bars and
options menu as well as their functions and the
key.
Back — Displays the previously viewed web page,
if any.
Forward — Displays the previously viewed
web page.
Refresh — Reloads and displays the current web
page.
Accessing the Web
124
Options
:
•
Home — Loads and displays the web page
designated as your “home page”.
•
Search — Displays a list of search engines
and other methods in order to perform an
internet search.
•
•
•
•
URL — Displays a field to enter a URL. Tap Go
to display the entered URL.
Go to Home — Loads and displays the web
page designated as your “home page”.
Zoom — Allows you to enlarge or shrink web
pages.
Add to Favorites — Allows you to save the
address and title of the current web page to
your favorites list.
•
Favorites — Displays and allows you to select
from a list of web sites you have saved as your
favorites.
•
•
History — Displays sites recently viewed or
mostly viewed.
Full screen — Displays the menus in full
screen mode.
125
•
•
•
•
Send URL — Attaches this URL and sends it as
a text message.
Search text — Allows you to search the text on
this page.
RSS feeds — Displays a list of the current RSS
feeds.
Settings — Displays the Browser Settings
menu, and allows configuration of the
browser.
Press to exit the Browser and return the phone to
Standby mode.
Accessing the Web
126
Section 9: Voice Service
This section explains how to use your phone’s speech recognition
software to place calls and to launch a number of your phone’s
features.
Launching Voice Service
Voice Service is state-of-the-art voice recognition software for your
mobile phone that allows you to dial numbers, lookup contact
information, and open applications using your voice. Do the following
to launch Voice Service:
1. From a Home screen, tap Menu
➔
Tools
➔
Voice Service.
2. Tap the desired option:
• Voice Commands: Launches the voice recognition function, letting you
place calls, access your Contacts list, review your Calendar, and more by
• Voice Command Settings: Allows you to tailor Voice Services functions
to suit your voice and phone use preferences, and displays version
information about the Voice Services software.
127
Voice Commands
To use Voice Commands, do the following:
1. From a Home screen, tap Menu
➔
Tools
➔
Voice Service.
2. Tap Voice Commands. “Say a Command” displays on the
screen, and is pronounced through the earpiece, followed by a
list of available commands:
• Call <Name of #>: Prompts you to place calls by saying any of the
following:
–
A
Contact name stored in your contact list.
Voice Service automatically voice-activates all your contacts, even if you have
hundreds of them stored on your phone.
–
A
• Send <MSG Type>: Launches the Text Picture screen to compose
/
• Go to <Menu>: Prompts you to launch the Ringtones, Calendar, and
Voice Service
128
• Check <Item>: Allows you to check your phone's status (that is, signal
strength, battery, and more in the same report), voicemail, messages,
missed calls, time, signal strength, battery, volume, and My number.
• Contacts <Name>: Allows you to look up and display contact
information for any name stored in your Contacts list by saying the
• Redial: Redials the last number dialed.
• Help: Shows a description of Voice Commands.
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, you are prompted to
repeat the command. If, after a few more seconds, the command is not
recognized, the message “Sorry, no match found,” is audible, then voice
recognition cancels.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start Voice Service, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, Voice Service automatically reloads and
voice-activates the entire list.
129
Ending Calls Before Restarting the Voice Service Software
When you use Voice Service to make a call, you must end that call
before you can use Voice Service again.
Voice Command Settings
Confirm Choices
Voice Service uses choice lists when it is not confident it has correctly
recognized a name or number. In this case, it can display a list of up
to three possible choices, and prompt you to confirm the correct one.
You can change the way that Voice Service responds to your choices
with name dialing, digit dialing, and contacts. To change the way
Voice Service responds to your choices, do the following:
1. From a Home screen, tap Menu
➔
Tools
➔
Voice Service.
2. Tap Voice Command Settings ➔ Confirm Choices.
3. Select one of the following options:
•
•
•
Automatic: Voice Service displays a choice list only when it is not sure if
it has correctly recognized the name or number.
Always Confirm: Voice Service always displays a choice list, regardless
that it is sure it recognizes the name or number.
Never Confirm: Voice Service never displays a choice list.
Voice Service
130
Sensitivity
1. From a Home screen, tap Menu
➔
Tools
➔
Voice Service.
2. Tap Voice Command Settings ➔ Sensitivity.
3. Tap the desired sensitivity level:
• More Sensitive
• Automatic
• Less Sensitive
Adapt Voice
If you regularly have trouble with Voice Service not recognize the
numbers you say, try adapting digit dialing to your voice. Adapting
can improve the accuracy of digit recognition, especially for people
with strong regional accents.
Note: After you complete voice adaptation, your phone is customized to your
voice, and your voice only. Others will not be able to use it unless they reset
the phone to factory defaults.
Adaptation involves recording several sequences of four digits each.
The recording process takes about a minute.
131
Tips for Adapting Voice
•
•
•
•
Use Adapt Voice in a quiet place.
Be sure to wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
•
Only use Adapt Voice if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people using
your phone. (You can always reset Adapt Voice to its original state, as
described below.)
Using Adapt Voice
To adapt your phone to your voice, do the following:
1. From a Home screen, tap Menu
➔
Tools
➔
Voice Service.
1. Tap Voice Command Settings ➔ Adapt Voice.
2. Tap Adapt Voice. An on-screen message recommends how to
proceed with voice adaptation.
3. Tap OK and wait for a voice prompt. You are prompted with a
series of sample voice commands and phone numbers.
4. After each prompt, wait until “Adapt Voice” begins slowly
flashing, then echo the prompt into the phone’s microphone.
5. After you echo the final prompt, “Adaptation complete”
displays on the screen and you are returned to the Adapt
Voice menu.
Voice Service
132
Key Setting
To set the key or action that launches Voice Service, do the following:
1. From a Home screen, tap Menu
➔
Tools
➔
Voice Service.
1. Tap Voice Command Settings ➔ Key Setting.
2. Tap the desired option:
•
None: You must use the phone menus or define a Shortcut to activate
Voice Service for one call.
•
None / Headset: Attach a headset to your phone to activate Voice
Service. Now, you can make and end calls using Voice Service by
pushing the action button on the headset. Press
Service.
to release Voice
About Voice Service
This option causes the About screen to display on the screen,
showing version and build information about the Voice Service
software included on your phone.
ᮣ
From a Home screen, tap Menu
➔
Tools
➔
Voice Service
➔
Voice Command Settings ➔ About
.
The About screen displays the version level of the Voice Service
software currently installed on your phone.
133
Section 10: Tools
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, perform calculations,
and more.
Tools Menu
Tools is a suite of Personal Information Management (PIM)
applications, such as a Calendar and Memo Pad, that run on your
phone.
ᮣ
In Standby mode, tap Menu ➔ Tools. The Tools menu displays
on the screen.
The following sections provide detailed descriptions of your
phone’s Tools.
Voice Service
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30 feet
without requiring a physical connection.
The Bluetooth wireless technology settings menu provides the ability
to view and change the device name, show the visibility, and set the
security for the device.
Tools
134
Turn Bluetooth On/Off
With Bluetooth set to On, you can use the available Bluetooth
features. When the Bluetooth is turned off, you cannot send or
receive information via Bluetooth. To save battery life or in situations
where Bluetooth use is prohibited, such as airline traveling, you can
turn off the Bluetooth wireless technology headset.
Turning Bluetooth On
ᮣ
In Standby mode, tap Menu ➔ Tools ➔ Bluetooth ➔ Turn On
.
The Bluetooth enabled (red) icon ( ) displays on the screen.
Turning Bluetooth Off
ᮣ
In Standby mode, tap Menu ➔ Tools ➔ Bluetooth ➔ Turn Off
.
The Bluetooth icon disappears from the display.
Pair with a Bluetooth Device
Pairing with another Bluetooth device is a one-time process. You can,
however, search for Bluetooth devices at any time in order to pair
with another device.
1. In Standby mode, tap Menu ➔ Tools ➔ Bluetooth ➔ Turn On
.
2. Tap Options icon) and tap the icon next to Discovery Mode
(
.
Discovery mode activates and the On icon displays a blue bar.
Your phone is discoverable for up to one minute.
3. Place the other Bluetooth device in discoverable mode. (See
the device user manual for more information.)
135
4. Tap
➔
Search new devices. The phone searches and lists
any discovered Bluetooth devices.
5. Tap the device you want to pair with your phone.
6. At the prompt press Yes
.
7. Tap one of the following options before connecting to the
device:
• Always Ask: prompts before connecting with a device.
• Always Connect: automatically connects without prompting.
Your phone pairs with the selected device.
Device List
A list of Bluetooth wireless technology devices paired to your handset
displays below the Search new devices option.
Bluetooth Options
1. In Standby mode, tap Menu ➔ Tools ➔ Bluetooth.
2. Tap
• My Phone Name: Shows the handset name. To change this name, open
the QWERTY keypad, enter a new name, and tap Done
(Options icon) and select one of the following options:
.
• My Phone Info: Shows the Bluetooth device Type, Status, and Address
of your phone.
• Discovery Mode: When set to On, lets other devices discover and
attempt to pair and connect with your phone. When set to Off, your
phone is not visible to other devices.
Tools
136
• Auto Pairing: When set to On, your phone attempts to automatically pair
with a selected, discovered device. When set to Off, you are prompted to
manually enter a device’s PIN to pair with that device.
• Supported Profiles: Lists and explains the Bluetooth profiles your phone
supports.
Calendar
Calendar allows you to view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current date
is highlighted and days with scheduled events are surrounded by a
box.
1. In Standby mode, tap Menu ➔ Tools ➔ Calendar. A calendar
of the current month or week displays on the screen with the
current date highlighted. The month and year also display.
How to navigate the Calendar:
1. Swipe the screen left or right to move to another monthly or
weekly calandar.
2. Tap a date to view a list of events for a particular date.
•
Tap a preferred event to view a particular event in the list.
3. Tap Options icon) and select one of the following options:
• Weekly View Monthly View: Changes the type of calendar that
(
/
displays on the screen.
•
Go to Date: Allows you to jump to any date you specify.
• Go To Today: Displays today’s date highlighted.
Erase All Old: Allows you to erase past events.
•
137
• Erase All: Erases all the events for this date.
• Search: Searches for words contained in these events.
• Send via Bluetooth: Sends this event to another Bluetooth-enabled
device.
Add a New Event
1. In Standby mode, tap Menu ➔ Tools ➔ Calendar.
2. Tap the date of the new event, then tap
. The New Event
screen displays.
3. Open the QWERTY keypad, tap the Event field and enter the
4. Continue entering event details such as Start Date, Start Time,
and more, then tap Save to store the event in your calendar.
Note: If you set a notification Alert, an alert (tone/vibration) notifies you prior to the
event.
Memo Pad
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad anytime
you wish to review and edit your notes.
Add a Memo
1. In Standby mode, tap Menu ➔ Tools ➔ Memo Pad
.
Stored memos display on the screen.
Tools
138
2. Tap
displays.
to add a new memo. The Add New Memo screen
4. Tap Symbols and tap a symtol to enter into your text message.
5. Tap Save when you’re finished entering details for the memo.
View, Edit, and Erase Memos
1. In Standby mode, tap Menu ➔ Tools ➔ Memo Pad. A list of
memos displays on the screen.
2. Tap a memo to display it on the screen.
3. Tap Edit to edit the memo you are viewing then edit the memo
4. Tap Erase to erase the memo you are viewing. You are
prompted to verify the erasure.
5. At the prompt, tap Yes to erase the memo.
– or –
Tap No to keep the memo.
139
Sketch Pad
Sketch Pad allows you to use your phone to freehand draw images
and text.
1. In Standby mode, tap Menu ➔ Tools ➔ Sketch Pad. The
Sketch Pad screen displays.
2. Tap one or more of the following options:
•
•
•
•
•
•
•
Drag your fingertip across the display to draw on the Sketch Pad.
Tap Back to view the previous screen.
Tap Style to change the Sketch Pad background.
Tap Thickness to change the drawing line thickness.
Tap Color to change the drawing (foreground) color.
Tap Send to include a copy of a drawing as part of a Picture message.
•
•
Tap Erase
➔
Clear All to erase a drawing.
Tap Undo to remove the preceeding line you drew.
Tools
140
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or daily
at a specified time. Once set, the alarm clock is easy to change or
turn off completely.
Note: The alarm doesn’t function when the phone is turned off. If the time for an
alarm that was set for Once has elapsed and the phone is off, the alarm
occurs at the same time on the following day.
1. In Standby mode, tap Menu ➔ Tools ➔ Alarm Clock. The
Alarm screen displays.
2. Tap
to add an Alarm. The New Alarm screen displays.
3. Tap a field and enter the or set the information:
–
–
Time: Tap to select the time when the alarm will sound.
Frequency: Tap to select whether the alarm sounds Once, Daily, Monday to
Friday, or Weekends.
–
Ringtone: Tap to select a recorded sound file, a music file, or a ringtone to
sound at the set time.
–
–
Snooze: Tap to select a snooze duration of 3 / 5 / 10 / 15 / 30 minutes.
Repeat: Tap to select the number of times the alarm repeats (Once, Twice, or
3 / 5 / 10 Times.
4. Tap Save to save a new or changed alarm.
An animated alarm clock displays on the screen with the options
Snooze or Dismiss, and an alert sounds when the specified time for
the alarm arrives.
141
5. Use the Navigation key to highlight Dismiss, then press
to silence the alarm.
•
•
•
•
If the alarm was set as a Daily alarm, the alarm icon remains in the top of
the display.
If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in the
top of the display.
If the alarm was set as a Weekends only alarm, the alarm icon remains
in the top of the display.
If the alarm was set as a Once only alarm, the alarm icon disappears
from the top of the display.
Erase an Alarm:
ᮣ
Tap the Trash can icon, then tap each individual alarm to erase,
or tap Mark All, then tap Erase.When an Alarm Sounds
Tools
142
World Time
World Time allows you to view the time of day or night in up to four
cities of the world at the same time. World Time displays time in any
of dozens of different cities and/or time zones around the world.
1. In Standby mode, tap Menu ➔
Tools ➔ World Time. The World
Time screen displays.
2. Tap
to add a clock to the
World Time screen. The Add Clock
menu pop-up displays.
3. Tap one of the following
locations:
• United States: Lists cities in the USA.
• Other Countries: Lists cities in
countries other than the USA.
4. Do one of the following:
•
Search for the desired city by opening the QWERTY keypad, tapping the
search field, and entering the first few letters of the city’s name.
•
Browse the list by swiping up/down until you find the desired city’s
name.
5. Tap the city’s name once the city name is located.
143
6. Tap a clock on the screen, then tap one of the following World
Time options:
• DST: Turns Daylight Saving Time display on or off for this clock.
• Erase: Remove this clock from the World Time screen.
• 2nd clock set: Designate this clock as 2nd clock.
Stop Watch
Stop Watch allows you to use your phone to measure the durations of
events. You can use Stop Watch to measure lap times as well and
total even times.
1. In Standby mode, tap Menu ➔ Tools ➔ Stop Watch.
2. Tap Start to begin or resume the stop watch count.
3. Tap Lap to record a lap completion time.
4. Tap Stop to end or pause the stop watch count.
5. Tap Reset to erase the stop watch and all lap times recorded.
Timer
Timer allows you to use your phone as a countdown timer. At the end
of the count, an alert tone sounds.
1. In Standby mode, tap Menu ➔ Tools ➔ Timer. The Timer
screen displays.
2. Set the countdown timer by tapping the up/down arrows for
Hour (00 – 23), Minute (00 – 59), and/or Second (00 – 59).
Tools
144
3. Start the timer by tapping Start. The following options are
available:
•
•
•
•
Tap Stop to pause or end the count.
Tap Restart to resume the count.
Tap Reset to erase the current count.
Tap OK to silence the alert once the set time is expired.
Calculator
You can perform calculations, including addition, subtraction,
multiplication, and division using your phone.
1. In Standby mode, tap Menu ➔ Tools ➔ Calculator. The
Calculator keypad screen displays.
2. Enter the first number in your calculation using the touch
screen keypad (numbers can be up to 15 digits long, with up to
10 of thos digits after a decimal point).
•
•
Tap +/- to toggle the sign of a number between positive and negative.
Tap ( ) before and after parts of the calculation you want to perform first
to “nest” calculations within a calculation.
3. Tap the appropriate calculation operator (
/
,
X,
-,
+) to set the
type of calculation you want to perform (division, multiplication,
subtraction, or addition).
4. Enter the next number in your calculation using the touch
screen keypad.
5. Tap
=
to perform the calculation and view the result.
145
6. Tap to clear the calculation field and perform another
C
calculation.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
•
•
Tip (gratuity)
Split (individual payment: for groups)
Calculations are based on the following numbers:
•
•
•
Total amount of the check
Tip percentage (default is 20%)
Number of people paying (default is 2 persons)
1. In Standby mode, tap Menu ➔ Tools ➔ Tip Calculator. The Bill
entry keypad screen displays.
2. Tap the keypad keys to enter the total amount of the bill.
3. Tap Done. The Tip Calculator screen displays, with the Bill Tip,
,
and Split fields populated with your intial entry and default
values.
4. Tap the desired field to change the Bill Tip, or Split field entry.
,
5. Enter the new value and tap Done. The amount of the Tip, the
bill Total, and the amount Each person should pay displays on
the screen.
Tools
146
Converter
The conversion menu provides the following conversion calculations:
•
•
•
•
•
•
Temperature
Length
Weight
Area
Volume
Currency
To perform a conversion calculation, do the following:
1. In Standby mode, tap Menu ➔ Tools ➔ Converter ➔
Temperature
/
Length
/
Weight
/
Area
/
Volume Currency. The
/
quantity to convert entry screen displays.
2. Tap the drop-down in the upper-right corner and select a
conversion From value.
3. Enter the quantity you to convert and press Done. A list of
converted quantities displays.
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange rates
as default values. To review and/or change a default exchange rate to
the current exchange rate, do the following:
1. In Standby mode, tap Menu ➔ Tools ➔ Converter ➔
Currency. The quantity to convert entry screen displays.
147
2. Tap the drop-down in the upper-right corner and select a
conversion From value.
3. Enter a value and tap Done. A list of converted values displays.
4. Tap Rate to see comparison value rates.
5. Tap Reset to reset the values.
Device Search
The Device Search feature allows you to enter the name of any device
on the phone and then displays that device, folder, file, or other as a
selectable item on the screen.
Note: Device search only searches informatio saved on your phone.
1. In Standby mode, tap Menu ➔ Tools ➔ Device Search.
2. Tap OK or Don’t Show Again at the prompt.
3. Slide open the phone, enter the search criteria, then tap
Search. Any application or device that matches the search
displays on the screen.
4. Tap the device to launch the application.
Tools
148
Section 11: Changing Your Settings
This section explains how to customize your phone to suit your needs
and preferences.
Accessing Your Settings
ᮣ
To access your phone’s settings from Standby mode, tap Menu
Settings. The Settings menu displays.
➔
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for continuous
operation or to operate only in the event that you dial 911.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
1. In Standby mode, tap Menu ➔ Settings.
2. Tap Location.
The following options display on the screen:
• Location on: GPS location setting is on whenever you make or receive a
call, wherever the feature is available.
• E911 Only: GPS location setting is on only when you dial 911.
3. Tap the desired Location setting. You’re returned to the
Settings menu.
149
Widgets
This setting allows you to select which Widgets are available from the
Widgest bar.
1. In Standby mode, tap Menu ➔ Settings.
2. Tap Widgets. The following Widgets are included in your r640
phone:
Send Message: Launches the Send Message
sub-menu.
Top 5 Contacts: Allows you to quickly call any of five
pre-identified Contacts.
Pictures: Opens the Pictures folder.
Clock: Shows the current time of day.
Calendar: Launches the Calendar tool.
Date: Shows the current day and date.
Bluetooth: Launches the Bluetooth menu.
Changing Your Settings
150
Tutorial: Launches the Tutorial menu.
3. To add/remove individual Widgets to/from the Widget bar, tap
the check box to the right of each Widget. A checkmark
appears for added Widgets, and disappears for removed
Widgets.
•
To remove all Widgets from the Widget bar, tap the Unmark All
checkbox.
•
To add all Widgets to the Widget bar, tap the Mark All checkbox.
4. Mark or Unmark the desired settings.
Sounds Settings
The sound menu provides a variety of options to customize audio
properties for such things as ringers, keypad tones alerts, and more.
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Sounds Settings.
The following sections describe the sound sub-menus in detail.
Master Volume
Use the Volume sub-menu to set the default volume for incoming
calls and alarms, or set the phone to vibrate.
1. In Standby mode, tap Menu ➔ Settings ➔ Sounds Settings.
2. Tap Master Volume.
151
3. Slide your finger around the Master Volume dial or press the
Volume key up or down to select one the following volume
settings:
• All Sounds Off
• Alarm Only
• Vibrate Only
• Low
• Medium Low
• Medium
• Medium High
• High
4. Tap Set to save the setting.
5. Tap Play to listen to a sample of the tone.
Call Sounds
You can assign ringer types and melody tones for calls, alarms, and
other alerts, in the Call Sounds sub-menu.
1. In Standby mode, tap Menu ➔ Settings ➔ Sounds Settings.
2. Tap Call Sounds. Choose settings from the following options:
• Call Ringtone: Allows you to select which ringtone or sound file plays
when you receive a voice call.
• Call Vibrate: Allows you to set your phone to vibrate when you receive a
voice call (On).
• Caller ID Readout: Allows you to set your phone to respond to incoming
calls by Ringing Only and showing the calling number, by showing the
Caller ID and Ringing, or (for Contacts) to Repeatedly playback the calling
Contact’s Name.
Changing Your Settings
152
Alert Sounds
You can set your phone to sound an alert whenever you enter or leave
your service area, connect or disconnect a call, as well as other
options.
1. In Standby mode, tap Menu ➔ Settings ➔ Sounds Settings.
2. Tap Alert Sounds. The following Alert Sounds sub-menus
display on the screen:
• Text Message: Allows you to select which Tone (ringtone or sound file)
plays, set your phone to Vibrate, set your phone to Reminder (repeat)
your Tone and/or Vibration (Once, Every 2 Minutes, Every 15 minutes, or
Off) when you receive a Text Message.
• Multimedia Message: Allows you to select which Tone (ringtone or
sound file) plays, set your phone to Vibrate, set your phone to Reminder
(repeat) your Tone and/or Vibration (Once, Every 2 Minutes, Every 15
minutes, or Off) when you receive a Picture Message.
• Voicemail: Allows you to select which Tone (ringtone or sound file) plays,
set your phone to Vibrate, set your phone to Reminder (repeat) your Tone
and/or Vibration (Once, Every 2 Minutes, Every 15 minutes, or Off) when
you receive a Voicemail message.
• Missed Call: Allows you to select which Tone (ringtone or sound file)
plays, set your phone to Vibrate, set your phone to repeat your Tone and/
or Vibration (Once, Every 2 Minutes, Every 15 minutes, or Off) when you
fail to answer (miss) a call.
•
Device Connect: Allows you to set your phone to play a tone when a
Bluetooth connection with another device is established.
3. Tap the desired Alert Sound(s) and setting(s).
153
Keypad Volume
Keypad Volume allows you to adjust the volume level of the tones that
the keypad generates each time you tap/press a key.
1. In Standby mode, tap Menu ➔ Settings ➔ Sounds Settings.
2. Tap Keypad Volume.
3. Slide your finger around the Keypad Volume dial or press the
Volume key up or down to select one the following volume
settings:
• Sound Off
• Low
• Medium Low
• Medium
• Medium High
• High
4. Tap Set to save the setting.
Service Alerts
You can set your phone to sound an alert whenever you enter or leave
your service area, every minute during a call, as well as other
options.
1. In Standby mode, tap Menu ➔ Settings ➔ Sounds Settings.
2. Tap Service Alerts. The following Service Alerts options
display on the screen:
•
Roaming: Sounds an alert when you leave your home service area.
• Minute Beep: Sounds an alert 10 seconds before the end of each
minute a call lasts.
•
Call Connect: When you make a call, an alert sounds when the call is
answered.
Changing Your Settings
154
3. Tap the desired Service Alert setting(s).
Power On/Off
Set whether the sound plays when you power your phone on.
1. In Standby mode, tap Menu ➔ Settings ➔ Sounds Settings
➔ Power On.
2. The following options display on the screen:
• On: Set the Power On melody to play (tap On).
• Off: Set the phone to vibrate and no Power On melody plays (tap Off).
Display Settings
Using the Display menu, you can set the menu style, set the Home
screens and Lock screen wallpapers, customize the backlight
settings, and more.
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Display Settings.
The following sections describe the display sub-menus in
detail.
Banner
Create your own personalized text greeting that displays on the
screen while your phone is in Standby mode.
1. In Standby mode, tap Menu ➔ Settings ➔ Display Settings.
2. Tap Banner. The Personal Banner text entry screen displays.
155
3. Open the QWERTY keypad and enter a word or short phrase (up
to 18 characters) to display on your phone’s screen while in
Note: If necessary, press and hold the
key to erase an existing banner.
4. To save the new banner, tap Save
.
Backlight
You can set the backlight for your display or keypad to remain on or
off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
1. In Standby mode, tap Menu ➔ Settings ➔ Display Settings.
2. Tap Backlight. The following sub-menus display on the
screen:
•
Backlight Time: Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are 15, and 30
Seconds; Always On (this setting uses much more power than the
timed settings); and Always Off
7,
.
•
Brightness: Slide your finger across the touch screen between any of 5
optional settings (1 – 5).
3. Tap the desired option to launch its sub-menu and tap settings
as desired.
Changing Your Settings
156
Wallpaper
Wallpaper allows you to choose the pictures that display on your
phone’s screen while in Standby mode.
1. From one of the three Home screens, tap Menu
➔
Settings
➔
Display Settings Wallpaper. The Pictures screen displays.
➔
2. To browse the thumbnail images, slide your finger up or down
on the touch screen.
3. Tap the desired picture, then tap Set
.
Fonts
Fonts allows you to select the size of displayed dialed numbers and
the color for the text on the Lock Screen.
1. In Standby mode, tap Menu ➔ Settings ➔ Display Settings.
2. Tap Fonts.
3. Tap the desired font size and/or color from these options:
• Dial Font Size: Set dialed numbers to display in Normal or Large font
size.
• Lock Screen Font Color: Select one of 16 colors.
Unlock Screen
Unlock Screen allows you to select which key(s) can awaken your
phone’s display when locked and the backlight is off.
1. In Standby mode, tap Menu ➔ Settings ➔ Display Settings.
2. Tap Unlock Screen.
157
3. Tap one of these settings:
• Lock Key Only: Only pressing the Lock key awakens the display.
• Any Key: Pressing any key awakens the display.
Transition Effect
Transition Effect allows you to select how one screen replaces
another in phone’s display.
1. In Standby mode, tap Menu ➔ Settings ➔ Display Settings.
2. Tap Transition Effect.
3. Tap the desired Transition Effect setting:
• On: One screen replaces another by sliding over it, Left to Right or Right
to Left.
• Off: One screen overwrites another.
Touch Settings
Touch settings let you enable/disable automatic locking of your
phone, vibration feedback when you touch an active area on the
screen, and more.
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Touch Settings.
The Touch Settings screen displays and lists the following
options:
• Auto Lock: When set to On, causes the phone to lock automatically
when the backlight goes out.
• Sound: Tap the desired the feedback tone (Beep
/Glossy/Click) to be
played when you touch active areas of the display.
Changing Your Settings
158
• Volume Level: Allows you to set the volume at which the phone plays
the feedback Sound.
–
–
–
Sound Off
Low
Medium Low
–
–
–
Medium
Medium High
High
Phone Settings
You can use Phone Settings to disable your phone’s radio functions,
set the language used in screens and menus, invoke your phone’s
security options, and select whether your phone operates outside
your home area (roaming).
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Phone Settings.
The following sections describe the phone sub-menus in detail.
Airplane Mode
When set to On, Airplane Mode disables all radio functions of your
phone, as required in sensitive environments (such as on board an
aircraft). This prevents you from receiving or making calls (except
emergency calls), but you can still use other features (such as the
Camera and the Tools).
1. In Standby mode, tap Menu ➔ Settings ➔ Phone Settings.
2. Tap Airplane Mode.
3. Tap the desired option:
•
•
On: Disables the radio transmitter and receiver in your phone.
Off: Enables the radio transmitter and receiver in your phone.
159
Language
The language option on your phone can change the language of voice
prompts, menus, and key-input.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone Settings.
2. Tap Language.
3. Select one of the language options:
•
•
English
Español
QWERTY Action
QWERTY Action allows you to set a special shortcut for the QWERTY
keypad.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone Settings.
2. Tap QWERTY Action.
3. Select one of the following options:
• Off: No shortcut.
• Text Message: Typing on QWERTY keypad opens the New Text Msg
screen.
• Contacts: Typing on QWERTY keypad opens the Contact List screen.
• Memo Pad: Typing on QWERTY keypad opens the Add New Memo
screen.
Changing Your Settings
160
Word Completion
Word Completion is a predictive text entry aid. When set to On, this
option monitors your text entries and pops-up a list of words that
include the characters you have already entered. To complete the
word you are entering, just select it in the pop-up list.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone Settings.
2. Tap Word Completion.
3. Tap Help to view a description of the settings.
4. Select the desired option:
• On: Predictive text entry enabled.
• Off: Predictive text entry disabled.
Security
Use the Security menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, as well as
other security options.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone Settings.
2. Tap Security.
3. Enter the Lock code when the Enter Code keypad screen
displays.
Note: The default lock code is the last four digits of your telephone number.
The Security menu displays on the screen. The following
sections describe the Security menu options in detail.
161
Edit Code
This option allows you to set lock codes for your phone and/or for
calls and services on your phone.
Tip: The default lock code for your phone is generally the last four digits of your
phone number.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings ➔
Security.
2. Enter your four-digit security code.
3. Tap Edit Code.
4. Follow the prompts to change the lock code.
Note: Your phone does not allow you to view a lock code for obvious security
reasons. If you change a lock code, be sure to write down or memorize the
new code.
Restrictions
Restrictions let you restrict the use of your phone for outgoing calls,
incoming calls, and access to your Contacts.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings ➔
Security.
2. Enter your four-digit security code.
Changing Your Settings
162
3. Tap Restrictions. and select one of the following, Restriction
settings:
• Calls: Allows you to Allow All Incoming and/or Outgoing calls, Allow calls
to and/or from Contacts only, or Allow None.
• SMS Messages: Allows you to Allow All / Allow None Incoming and/or
Outgoing messages.
• MMS Messages: Allows you to Allow All / Allow None Incoming and/or
Outgoing messages.
• IP Connection: Allows you to Allow All IP connections / Allow None.
Emergency #
You can view and save emergency phone numbers to the phone using
this feature.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings ➔
Security.
2. Enter your four-digit security code.
3. Tap a field labeled Empty, open the slide-out keypad and enter
a number.
4. Tap Save to save this emergency number.
163
Phone Lock Setting
Locking the phone limits all outgoing calls, except Emergency (911)
calls. Also, you cannot access phone menus, functions, and services.
To unlock the phone, you must enter the phone’s lock code. (For more
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings ➔
Security.
2. Enter your four-digit security code.
3. Tap Phone Lock Setting.
4. Select one of the following Phone Lock settings:
•
•
Unlocked: Unlocks the phone.
On Power Up: The phone locks automatically the next time your phone
is powered ON. (The phone stays locked until you enter the lock code.)
Lock Phone Now
This setting locks the phone
immediately. The phone stays locked
until you enter the lock code. (For more
1. In Standby mode, tap Menu ➔
Settings ➔ Phone settings ➔
Security.
2. Enter your four-digit security code.
Changing Your Settings
164
3. Tap Lock Phone Now. “Phone locked” pops-up in the display.
You are returned to the Home screen, which is now in Phone
Lock mode.
Note: To unlock, select Unlock in Standby mode and enter the lock code.
Reset Settings
Reset Settings returns all Settings options to their factory default.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings ➔
Security.
2. Enter your four-digit security code.
3. Tap Reset Settings. You are prompted to confirm that you wish
to reset your phone’s Settings to default values (except for your
Contacts list and Voice Dial).
4. Tap Yes to reset your Settings to default values.
Important!: Resetting does not delete user data.
– or –
Tap No to maintain your current Settings and return to the
Security sub-menu.
165
System Select
The System Select menu allows you to select the roaming setting for
your phone.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings.
2. Tap System Select. The following roaming options display on
the screen:
•
Home Only: Your phone is available for normal operation only within
your designated coverage area.
• Automatic: Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are found,
any digital system is acquired.
3. Tap the desired roaming option. You setting is saved, and you
are returned to the Phone Settings menu.
NAM Select
NAM Select allows you to select NAM (Number Assignment Module)
settings for your phone. You can store two NAM settings, which are
essentially telephone numbers, for your phone.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings.
2. Tap NAM Select
.
3. Tap one of the desired NAM settings:
• NAM1: Your service contract has one phone line.
• NAM2: Your service contract has two phone lines.
The phone powers itself off and back on.
Changing Your Settings
166
Set Time
Using the Set Time option you can set the date and time on the
device.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings ➔
and tap Set Time
.
2. Tap one or both of the options then tap Save:
• Date: Enter the current date in the following format mm/dd/yyyy.
• Time: Enter the current time in the following format hh:mm am/pm
PC Connection
PC Connection allows you to select the default type of PC connection
you wish to use to exchange files between a PC and your r640.
Tip: For more information on using PC Connection, contact your service provider.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone settings.
2. Tap PC Connection.
3. Tap the preferred PC Connection type:
• USB Mass Storage: Automatically activates when you connect your
phone to a PC with an optional USB Data Cable. Allows you to access
your phone’s memory and any optional microSD Memory Card, if
• No Connection: This option blocks your r640 from connecting with
a PC.
167
Call Settings
You can use Call Settings to select how your phone handles calls,
both voice and data calls.
1. In Standby mode, tap Menu ➔ Settings.
2. Tap Call Settings. The following sections describe the call
sub-menus in detail.
Answer Options
You can select a specific answer mode when you receive an incoming
Tip: You can set your phone to answer calls automatically, without any input from
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1. In Standby mode, tap Menu ➔ Settings ➔ Call Settings.
2. Tap Auto Retry
.
3. Tap the desired setting:
•
•
Every 10 Seconds: Phone automatically re-dials a number every 10
seconds.
Every 30 Seconds: Phone automatically re-dials a number every 30
seconds.
Changing Your Settings
168
•
•
Every 60 Seconds: Phone automatically re-dials a number every 60
seconds.
Off: Disables automatic re-dialing of numbers.
TTY Mode
Your phone is fully TTY compatible. TTY equipment is connected to
your phone through the headset connector on the left side of the
phone. TTY must be enabled before you can use your phone with a
TTY device.
1. In Standby mode, tap Menu ➔ Settings ➔ Call Settings ➔
TTY Mode. You are prompted to confirm you want to change
the current TTY Mode setting.
Note: The “Enabling TTY will disable headset audio. Continue?” message
pops up when you tap TTY Mode.
2. Press No to return to the Call Settings sub-menu.
– or –
Press Yes to access the TTY Mode options and tap the desired
TTY setting:
Note: Enabling TTY disables the headset audio.
• TTY Full: Enables TTY mode and disables microphone and earpiece.
• TTY + Talk (VCO): Enables TTY mode and microphone.
• TTY + Hear (HCO): Enables TTY mode and earpiece.
• TTY Off: Disables TTY mode.
169
Note: The TTY icon ( ) display at the top of the screen.
One Touch Dial
1. In Standby mode, tap Menu ➔ Settings ➔ Call Settings.
2. Tap One Touch Dial then tap the desired setting:
•
•
On: One Touch Dial is enabled.
Off: One Touch Dial is disabled.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1. In Standby mode, tap Menu ➔ Settings ➔ Call Settings.
2. Tap Voice Privacy then tap the desired setting:
•
•
Enhanced: Voice privacy is enabled.
Standard: Voice privacy is disabled.
DTMF Tones
DTMF Tones let you select the length of the tone that the keypad
generates each time you press a key.
1. In Standby mode, tap Menu ➔ Settings ➔ Call Settings.
2. Tap DTMF Tones then tap the desired setting:
•
•
Normal: transmits all the tones for the same amount of time.
Long: transmits the tone for as long as you press the button (sometimes
useful on an automated system that will not recognize a short signal).
Changing Your Settings
170
Memory Manager
Memory Manager allows you to quickly and easily review and
manage your phone memory usage.
1. In Standby mode, tap Menu ➔ Settings ➔ Memory Manager.
The following sections describe the Memory Manager options
in detail.
Save Options
Save Options let you specify where you want your images stored.
1. In Standby mode, tap Menu ➔ Settings ➔ Memory Manager.
2. Tap Save Options
➔
Pictures Sounds.
/
3. Tap the desired storage location:
• Phone: Saves the selected type of files in your phone’s memory.
• Card: Saves the selected type of files in a removable microSD memory
card.
Phone Memory
Allows you to review your phone’s available memory and manage
your stored files.
171
Memory Usage
Memory Usage allows you to review your usage of your phone’s
memory.
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Memory Manager
➔ Phone Memory ➔ Memory Usage. The Memory Usage
screen displays the following information:
•
•
•
•
•
•
•
Available unused memory.
Used memory usage.
Total memory.
Pictures memory usage.
Ringtones memory usage.
Applications memory usage.
Multimedia Msg memory usage.
Freeing Memory
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up memory
on your phone for reuse.
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Memory Manager
➔ Phone Memory ➔ Pictures Ringtones. A list of all files in
/
the related folder displays on the screen.
Files are listed by name, and each file entry displays the name
and size of each file.
Changing Your Settings
172
To erase files:
1. Press Erase
.
2. Tap a file to mark the file for erasure. (Tap Mark All to mark all
files for erasure.)
3. Tap Done. You are prompted to confirm erasure of the selected
file(s).
4. Tap Yes to erase all marked files, or tap No to return to the
Erase screen.
To move files to the Memory Card:
1. Press Move.
2. Tap a file to mark the file for moving. (Tap Mark All to mark all
files to move.)
3. Tap Done.
4. Tap Yes at the prompt to move all marked files.
– or –
Tap No to return to the Move screen.
Card Memory
Card Memory allows you to review a removable, microSD Memory
Card’s available memory, manage your files stored there, and format
new microSD Memory Cards.
173
Memory Usage
Memory Usage allows you to review your usage of your Memory
Card.
1. In Standby mode, tap Menu ➔ Settings ➔ Memory Manager
➔ Card Memory ➔ Memory Usage. The Memory Usage
screen displays the following information:
•
•
•
•
•
Available unused memory
Used memory
Total memory
Pictures memory usage
Music memory usage
2. Press
to return to the Card Memory menu.
Freeing Memory
Card Memory sub-menus let you list files in your multimedia folders
and let you erase or move files as needed to free up space on your
Memory Card for reuse.
ᮣ
In Standby mode, tap Menu ➔ Settings ➔ Memory Manager
➔ Card Memory ➔ Pictures Music. A list of all files in the
/
folder displays on the screen.
Files are listed by name, and each file entry displays the name
and size of each file.
Changing Your Settings
174
To erase files:
1. Tap Erase.
2. Tap a file you want to erase to mark the file for erasure. (Tap
Mark All to mark all files for erasure.)
3. Tap Done. You are prompted to confirm erasure of the selected
file(s).
4. Tap Yes to erase all marked files, or tap No to return to the
Erase screen.
To move files to the phone:
1. Tap Move.
2. Tap an image file to mark the file for moving. (Press Mark All
to mark all files for moving.)
3. Tap Done. You are prompted to confirm moving or copying the
selected file(s) to the phone.
4. Tap Yes to move all marked files.
– or –
Press No to return to the Move screen.
5. Press
to return to the Pictures / Music / Format Card
to return to Standby mode.
sub-menu. Press
175
Formatting a Memory Card
Tip: Memory Cards written to and/or formatted by other devices are likely to slow
your phone’s response to commands and produce other unwanted results. To
avoid such problems, format a used microSD Memory Card after inserting it
in your handset.
Formatting a microSD or microSDHC Memory Card erases any data
currently on the card and creates multimedia directories compatible
with your phone.
Caution!: Repeated formatting of a microSD card reduces its service life. So, don’t
reformat a Memory Card just to free up storage space.
To regain space on a microSD card already formatted by your phone,
1. In Standby mode, tap Menu ➔ Settings ➔ Memory Manager
➔ Card Memory ➔ Format Card. You are prompted to
confirm formatting of the Memory Card.
2. Tap Yes at the prompt to format the Memory Card.
– or –
3. Tap No at the prompt to cancel.
Changing Your Settings
176
Phone Info
Phone Info options let you identify important information about your
phone, such as the hardware and software versions of your phone,
the meanings of your phones status icons, and the phone number
assigned to your phone.
Tip: This information can be very important to you when contacting Customer
Care personnel.
1. In Standby mode, tap Menu ➔ Settings ➔ Phone Info.
2. Tap the desired Phone Info option:
• My Number: Displays the ten-digit number assigned to your phone by
your Wireless Provider.
• SW/HW Version: Displays both the software and hardware versions of
your phone.
• Icon Glossary: Displays and defines the status icons available on this
phone.
177
Section 12: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. The terms “mobile device” or “cell phone” are used in
this section to refer to your phone. Read this information before using
your mobile device
.
Exposure to Radio Frequency (RF) Signals
The U.S. Food and Drug Administration (FDA) has published
information for consumers relating to Radio Frequency (RF) exposure
from wireless phones. The FDA publication includes the following
information:
Do cell phones pose a health hazard?
Many people are concerned that cell phone radiation will cause
cancer or other serious health hazards. The weight of scientific
evidence has not linked cell phones with any health problems.
Cell phones emit low levels of Radio Frequency (RF) energy. Over the
past 15 years, scientists have conducted hundreds of studies looking
at the biological effects of the radio frequency energy emitted by cell
phones. While some researchers have reported biological changes
associated with RF energy, these studies have failed to be replicated.
The majority of studies published have failed to show an association
between exposure to radio frequency from a cell phone and health
problems.
Health and Safety Information
178
The low levels of RF cell phones emit while in use are in the
microwave frequency range. They also emit RF at substantially
reduced time intervals when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue), exposure
to low level RF that does not produce heating effects causes no
known adverse health effects.
The biological effects of radio frequency energy should not be
confused with the effects from other types of electromagnetic energy.
Very high levels of electromagnetic energy, such as is found in X-rays
and gamma rays, can ionize biological tissues. Ionization is a process
where electrons are stripped away from their normal locations in
atoms and molecules. It can permanently damage biological tissues
including DNA, the genetic material.
The energy levels associated with radio frequency energy, including
both radio waves and microwaves, are not great enough to cause
ionization of atoms and molecules. Therefore, RF energy is a type of
non-ionizing radiation. Other types of non-ionizing radiation include
visible light, infrared radiation (heat), and other forms of
electromagnetic radiation with relatively low frequencies.
While RF energy does not ionize particles, large amounts can
increase body temperatures and cause tissue damage. Two areas of
the body, the eyes and the testes, are particularly vulnerable to RF
heating because there is relatively little blood flow in them to carry
away excess heat.
179
Research Results to Date: Is there a connection between
RF and certain health problems?
The results of most studies conducted to date say no. In addition,
attempts to replicate and confirm the few studies that have shown a
connection have failed.
The scientific community at large therefore believes that the weight
of scientific evidence does not show an association between
exposure to Radio Frequency (RF) from cell phones and adverse
health outcomes. Still the scientific community has supported
additional research to address gaps in knowledge. Some of these
studies are described below.
Interphone Study
Interphone is a large international study designed to determine
whether cell phones increase the risk of head and neck cancer. A
report published in the International Journal of Epidemiology (June,
2010) compared cell phone usage for more than 5,000 people with
brain tumors (glioma and meningioma) and a similar number of
healthy controls.
Results of this study did NOT show that cell phones caused brain
cancer. In this study, most people had no increased risk of brain
cancer from using cell phones. For people with the heaviest use of
cell phones (an average of more than ½ hour per day, every day, for
over 10 years) the study suggested a slight increase in brain cancer.
However, the authors determined that biases and errors prevented
any conclusions being drawn from this data. Additional information
Health and Safety Information
180
about Interphone can be found at
Interphone is the largest cell phone study to date, but it did not
answer all questions about cell phone safety. Additional research is
being conducted around the world, and the FDA continues to monitor
developments in this field.
International Cohort Study on Mobile Phone Users (COSMOS)
The COSMOS study aims to conduct long-term health monitoring of a
large group of people to determine if there are any health issues
linked to long-term exposure to radio frequency energy from cell
phone use. The COSMOS study will follow approximately 300,000
adult cell phone users in Europe for 20 to 30 years. Additional
information about the COSMOS study can be found at http://
.
Risk of Brain Cancer from Exposure to Radio Frequency Fields in
Childhood and Adolescence (MOBI-KIDS)
MOBI-KIDS is an international study investigating the relationship
between exposure to radio frequency energy from communication
technologies including cell phones and brain cancer in young people.
This is an international multi-center study involving 14 European and
non-European countries. Additional information about MOBI-KIDS can
be found at
.
181
Surveillance, Epidemiology, and End Results (SEER) Program of
the National Cancer Institute
The National Cancer Institute (NCI) actively follows cancer statistics in
the United States to detect any change in rates of new cases for brain
cancer. If cell phones play a role in risk for brain cancer, rates should
go up, because heavy cell phone use has been common for quite
some time in the U.S. Between 1987 and 2005, the overall age-
adjusted incidence of brain cancer did not increase. Additional
information about SEER can be found at
.
Cell Phone Industry Actions
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the cell phone industry to take a number
of steps, including the following:
•
•
•
Support-needed research on possible biological effects of RF for the type of
signal emitted by cell phones;
Design cell phones in a way that minimizes any RF exposure to the user;
and
Cooperate in providing users of cell phones with the current information on
cell phone use and human health concerns.
The FDA also is working with voluntary standard-setting bodies such
as the Institute of Electrical and Electronics Engineers (IEEE), the
International Commission on Non-Ionizing Radiation Protection
(ICNIRP), and others to assure that safety standards continue to
adequately protect the public.
Health and Safety Information
182
Reducing Exposure: Hands-Free Kits and Other Accessories
Steps to Reduce Exposure to Radio Frequency Energy
If there is a risk from being exposed to radio frequency energy (RF)
from cell phones - and at this point we do not know that there is - it is
probably very small. But, if you are concerned about avoiding even
potential risks, you can take a few simple steps to minimize your RF
exposure.
•
•
Reduce the amount of time spent using your cell phone;
Use speaker mode or a headset to place more distance between your head
and the cell phone.
Hands-Free Kits
Hands-free kits may include audio or Bluetooth® headsets and
various types of body-worn accessories such as belt-clips and
holsters. Combinations of these can be used to reduce RF energy
absorption from cell phones.
Headsets can substantially reduce exposure because the phone is
held away from the head in the user's hand or in approved body-worn
accessories. Cell phones marketed in the U.S. are required to meet
RF exposure compliance requirements when used against the head
and against the body.
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that hands-free kits
reduce risks. Hands-free kits can be used for convenience and
183
comfort. They are also required by law in many states if you want to
use your phone while driving.
Cell Phone Accessories that Claim to Shield the Head from
RF Radiation
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that accessories which
claim to shield the head from those emissions reduce risks. Some
products that claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that these
products generally do not work as advertised. Unlike “hands-free”
kits, these so-called “shields” may interfere with proper operation of
the phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption.
Health and Safety Information
184
Children and Cell Phones
The scientific evidence does not show a danger to any users of cell
phones from RF exposure, including children and teenagers. The
steps adults can take to reduce RF exposure apply to children and
teenagers as well.
•
•
Reduce the amount of time spent on the cell phone;
Use speaker mode or a headset to place more distance between the head
and the cell phone.
Some groups sponsored by other national governments have advised
that children be discouraged from using cell phones at all. For
example, The Stewart Report from the United Kingdom made such a
recommendation in December 2000. In this report, a group of
independent experts noted that no evidence exists that using a cell
phone causes brain tumors or other ill effects. Their recommendation
to limit cell phone use by children was strictly precautionary; it was
not based on scientific evidence that any health hazard exists.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations (updated
10/1/2010):
•
FCC RF Safety Program:
•
Environmental Protection Agency (EPA):
185
•
Occupational Safety and Health Administration (OSHA):
(Note: This web address is case sensitive.)
•
•
•
•
•
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
Health and Safety Information
186
Specific Absorption Rate (SAR) Certification
Information
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the exposure limits for Radio
Frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
These FCC exposure limits are derived from the recommendations of
two expert organizations: the National Council on Radiation Protection
and Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific and
engineering experts drawn from industry, government, and academia
after extensive reviews of the scientific literature related to the
biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific Absorption
Rate (SAR). The SAR is a measure of the rate of absorption of RF
energy by the human body expressed in units of watts per kilogram
(W/kg). The FCC requires wireless phones to comply with a safety
limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of safety to
give additional protection to the public and to account for any
variations in measurements.
187
SAR tests are conducted using standard operating positions accepted
by the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at
the highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the lower the
power output.
Before a new model phone is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
exposure limit established by the FCC. Tests for each model phone
are performed in positions and locations (e.g. at the ear and worn on
the body) as required by the FCC.
For body-worn operation, this phone has been tested and meets FCC
RF exposure guidelines when used with an accessory that contains
no metal and that positions the mobile device a minimum of 1.5 cm
from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
Health and Safety Information
188
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. The maximum SAR values for
this model phone as reported in the FCC equipment authorization
grant are:
•
•
Head: 0.50 W/Kg
Body-worn: 0.97 W/Kg
SAR information on this and other model phones can be viewed
a particular model phone, this site uses the phone FCC ID number
which is usually printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find
the number. Once you have the FCC ID number for a particular phone,
follow the instructions on the website and it should provide values for
typical or maximum SAR for a particular phone. Additional product
specific SAR information can also be obtained at www.fcc.gov/cgb/sar
.
189
Smart Practices While Driving
On the Road - Off the Phone
The primary responsibility of every driver is the safe operation of his
or her vehicle.
Responsible drivers understand that no secondary task should be
performed while driving whether it be eating, drinking, talking to
passengers, or talking on a mobile phone - unless the driver has
assessed the driving conditions and is confident that the secondary
task will not interfere with their primary responsibility. Do not engage
in any activity while driving a moving vehicle which may cause you to
take your eyes off the road or become so absorbed in the activity that
your ability to concentrate on the act of driving becomes impaired
.
Samsung is committed to promoting responsible driving and giving
drivers the tools they need to understand and address distractions.
Check the laws and regulations on the use of mobile devices and their
accessories in the areas where you drive. Always obey them. The use of
these devices may be prohibited or restricted in certain areas. For
example, only hands-free use may be permitted in certain areas.
Before answering calls, consider your circumstances. Let the call go
to voicemail when driving conditions require. Remember, driving
comes first, not the call!
If you consider a call necessary and appropriate, follow these tips:
•
•
Use a hands-free device;
Secure your phone within easy reach;
Health and Safety Information
190
•
•
•
•
Place calls when you are not moving;
Plan calls when your car will be stationary;
Do not engage in stressful or emotional conversations;
Let the person with whom you are speaking know that you are driving and
will suspend the call if necessary;
•
Do not take notes or look up phone numbers while driving;
Notice regarding legal restrictions on mounting this device in an
automobile:
Laws in some states may prohibit mounting this device on or near the
windshield of an automobile. In other states, the law may permit
mounting this device only in specific locations in the automobile. Be
sure to consult the state and local laws or ordinances where you drive
before mounting this device in an automobile. Failure to comply with
these restrictions could result in fines, penalties, or other damages.
Never mount this device in a manner that will obstruct the driver's
clear view of the street and traffic.
Never use wireless data services such as text messaging, Web
browsing, or e-mail while operating a vehicle.
Never watch videos, such as a movie or clip, or play video games while
operating a vehicle.
.
191
Battery Use and Safety
Important!: Handle and store batteries properly to avoid injury or damage. Most
battery issues arise from improper handling of batteries and,
particularly, from the continued use of damaged batteries.
•
Do not disassemble, crush, puncture, shred, or otherwise attempt to
change the form of your battery. Do not put a high degree of pressure on
the battery. This can cause leakage or an internal short-circuit, resulting in
overheating.
•
Do not let the phone or battery come in contact with liquids. Liquids
can get into the phone's circuits, leading to corrosion. Even when the phone
appears to be dry and appears to operate normally, the circuitry could
slowly corrode and pose a safety hazard. If the phone and/or battery get
wet, have them checked by your service provider or contact Samsung,
even if they appear to be working properly.
•
Do not place your battery in or near a heat source. Excessive heating
can damage the phone or the battery and could cause the phone or the
battery to explode. Do not dry a wet or damp battery with an appliance or
heat source such as a microwave oven, hair dryer, iron, or radiator. Avoid
leaving your phone in your car in high temperatures.
•
•
Do not dispose of the phone or the battery in a fire. The phone or the
battery may explode when overheated.
Do not handle a damaged or leaking battery. Do not let leaking battery
fluid come in contact with your eyes, skin or clothing. For safe disposal
options, contact your nearest Samsung-authorized service center.
Health and Safety Information
192
•
Avoid dropping the cell phone. Dropping the phone or the battery,
especially on a hard surface, can potentially cause damage to the phone
and battery. If you suspect damage to the phone or battery, take it to a
service center for inspection.
•
•
Never use any charger or battery that is damaged in any way.
Do not allow the battery to touch metal objects. Accidental
short-circuiting can occur when a metallic object (coin, key, jewelry, clip, or
pen) causes a direct connection between the + and - terminals of the
battery (metal strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
Important!: Use only Samsung-approved batteries, and recharge your battery only
with Samsung-approved chargers which are specifically designed for
your phone.
Warning!: Use of a non-Samsung-approved battery or charger may present a risk of
fire, explosion, leakage, or other hazard. Samsung's warranty does not
cover damage to the phone caused by non-Samsung-approved
batteries and/or chargers.
•
Do not use incompatible cell phone batteries and chargers. Some
websites and second-hand dealers not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier-recommended products and accessories. If unsure
193
about whether a replacement battery or charger is compatible, contact the
manufacturer of the battery or charger.
•
Misuse or use of incompatible phones, batteries, and charging
devices could result in damage to the equipment and a possible risk
of fire, explosion, or leakage, leading to serious injuries, damages to
your phone, or other serious hazard
.
Health and Safety Information
194
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to
recycle Samsung mobile devices and genuine Samsung accessories.
Proper disposal of your mobile device and its battery is not only
important for safety, it benefits the environment. Batteries must be
recycled or disposed of properly.
Recycling programs for your mobile device, batteries, and
accessories may not be available in your area.
We've made it easy for you to recycle your old Samsung mobile
device by working with respected take-back companies in every
state in the country.
Drop It Off
You can drop off your Samsung-branded mobile device and
batteries for recycling at one of our numerous Samsung Recycling
Direct (SM) locations. A list of these locations may be found at: http:/
.
Samsung-branded devices and batteries will be accepted at these
locations for no fee.
Consumers may also recycle their used mobile device or batteries
at many retail or carrier-provided locations where mobile devices
and batteries are sold. Additional information regarding specific
locations may be found at:
195
.
Mail It In
The Samsung Mobile Take-Back Program will provide Samsung
customers with a free recycling mailing label. Just go to
our_phone_page and follow the instructions to print out a free pre-
paid postage label and then send your old mobile device or battery
to the address listed, via U.S. Mail, for recycling.
Dispose of unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
Or call, (877) 278-0799.
Follow local regulations regarding disposal of mobile devices and
batteries
Dispose of your mobile device and batteries in accordance with local
regulations. In some areas, the disposal of these items in household
or business trash may be prohibited. Help us protect the environment
- recycle!
Warning!: Never dispose of batteries in a fire because they may explode.
Health and Safety Information
196
UL Certified Travel Charger
The Travel Charger for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions per
UL guidelines:
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA,
USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
197
Display / Touch-Screen
Please note the following information when using your mobile device:
WARNING REGARDING DISPLAY
The display on your mobile device is made of glass or acrylic
and could break if your mobile device is dropped or if it
receives significant impact. Do not use if screen is broken or
cracked as this could cause injury to you.
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN
MOBILE DEVICE
If your mobile device has a touch-screen display, please note
that a touch-screen responds best to a light touch from the pad
of your finger or a non-metallic stylus. Using excessive force or
a metallic object when pressing on the touch-screen may
damage the tempered glass surface and void the warranty. For
Health and Safety Information
198
GPS & AGPS
Certain Samsung mobile devices can use a Global Positioning System
(GPS) signal for location-based applications. A GPS uses satellites
controlled by the U.S. Government that are subject to changes
implemented in accordance with the Department of Defense policy
and the 2008 Federal Radio navigation Plan (FRP). Changes may
affect the performance of location-based technology on your mobile
device.
Certain Samsung mobile devices can also use an Assisted Global
Positioning System (AGPS), which obtains information from the
cellular network to improve GPS performance. AGPS uses your
wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with
your service plan. Contact your wireless service provider for details.
Your Location
Location-based information includes information that can be used to
determine the approximate location of a mobile device. Mobile
devices which are connected to a wireless network transmit location-
based information. Additionally, if you use applications that require
location-based information (e.g. driving directions), such applications
transmit location-based information. The location-based information
may be shared with third-parties, including your wireless service
provider, applications providers, Samsung, and other third-parties
providing services.
199
Use of AGPS in Emergency Calls
When you make an emergency call, the cellular network may activate
AGPS technology in your mobile device to tell the emergency
responders your approximate location.
AGPS has limitations and might not work in your area. Therefore:
•
Always tell the emergency responder your location to the best of your
ability; and
•
Remain on the mobile device for as long as the emergency responder
instructs you.
Navigation
Maps, directions, and other navigation data may contain inaccurate
or incomplete data, and circumstances can and do change over time.
In some areas, complete information may not be available. Therefore,
you should always visually confirm that the navigational instructions
are consistent with what you see before following them. All users
should pay attention to road conditions, closures, traffic, and all other
factors that may impact safe driving or walking. Always obey posted
road signs
.
Health and Safety Information
200
Emergency Calls
This mobile device, like any wireless mobile device, operates using
radio signals, wireless and landline networks, as well as user-
programmed functions, which cannot guarantee connection in all
conditions, areas, or circumstances. Therefore, you should never rely
solely on any wireless mobile device for essential communications
(medical emergencies, for example). Before traveling in remote or
underdeveloped areas, plan an alternate method of contacting
emergency services personnel. Remember, to make or receive any
calls, the mobile device must be switched on and in a service area
with adequate signal strength.
Emergency calls may not be possible on all wireless mobile device
networks or when certain network services and/or mobile device
features are in use. Check with local service providers.
To make an emergency call:
1. If the mobile device is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number). Emergency
numbers vary by location.
3. Press the “Send” key (
).
If certain features are in use (call blocking, for example), you may first
need to deactivate those features before you can make an emergency
call. Consult your User Manual and your local cellular service
201
provider. When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that your
mobile device may be the only means of communication at the scene
of an accident; do not cut off the call until given permission to do so.
Health and Safety Information
202
Care and Maintenance
Your mobile device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help you
fulfill any warranty obligations and allow you to enjoy this product for
many years:
Keep your Samsung Mobile Device away from:
Liquids of any kind
Keep the mobile device dry. Precipitation, humidity, and liquids
contain minerals that will corrode electronic circuits. If the mobile
device does get wet, do not accelerate drying with the use of an
oven, microwave, or dryer, because this may damage the mobile
device and could cause a fire or explosion. Do not use the mobile
device with a wet hand. Doing so may cause an electric shock to
you or damage to the mobile device.
Extreme heat or cold
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.
Microwaves
Do not try to dry your mobile device in a microwave oven. Doing so
may cause a fire or explosion.
Dust and dirt
Do not expose your mobile device to dust, dirt, or sand.
203
Cleaning solutions
Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the mobile device. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
Shock or vibration
Do not drop, knock, or shake the mobile device. Rough handling
can break internal circuit boards.
Paint
Do not paint the mobile device. Paint can clog the device’s moving
parts or ventilation openings and prevent proper operation.
Health and Safety Information
204
Responsible Listening
Caution!: Avoid potential hearing loss
.
Damage to hearing occurs when a person is exposed to loud sounds
over time. The risk of hearing loss increases as sound is played
louder and for longer durations. Prolonged exposure to loud sounds
(including music) is the most common cause of preventable hearing
loss. Some scientific research suggests that using portable audio
devices, such as portable music players and cell phones, at high
volume settings for long durations may lead to permanent noise-
induced hearing loss. This includes the use of headphones (including
headsets, earbuds, and Bluetooth® or other wireless devices).
Exposure to very loud sound has also been associated in some
studies with tinnitus (a ringing in the ear), hypersensitivity to sound,
and distorted hearing. Individual susceptibility to noise-induced
hearing loss and potential hearing problem varies. Additionally, the
amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the
headphones that are used. As a result, there is no single volume
setting that is appropriate for everyone or for every combination of
sound, settings, and equipment.
205
You should follow some common sense recommendations when
using any portable audio device:
•
•
•
•
Always turn the volume down before plugging the earphones into an audio
source.
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Be aware that you can adapt to higher volume settings over time, not
realizing that the higher volume may be harmful to your hearing.
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear what
you are listening to.
•
Do not turn the volume up to block out noisy surroundings. If you choose to
listen to your portable device in a noisy environment, use noise-cancelling
headphones to block out background environmental noise. By blocking
background environment noise, noise cancelling headphones should allow
you to hear the music at lower volumes than when using earbuds.
•
•
Limit the amount of time you listen. As the volume increases, less time is
required before you hearing could be affected.
Avoid using headphones after exposure to extremely loud noises, such as
rock concerts, that might cause temporary hearing loss. Temporary hearing
loss might cause unsafe volumes to sound normal.
Health and Safety Information
206
•
Do not listen at any volume that causes you discomfort. If you experience
ringing in your ears, hear muffled speech, or experience any temporary
hearing difficulty after listening to your portable audio device, discontinue
use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Internet: http://www.nidcd.nih.gov/
207
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4674)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
1-888-232-6348 TTY
Health and Safety Information
208
Operating Environment
Remember to follow any special regulations in force in any area, and
always switch your mobile device off whenever it is forbidden to use
it, or when it may cause interference or danger. When connecting the
mobile device or any accessory to another device, read its user's
guide for detailed safety instructions. Do not connect incompatible
products.
Using Your Mobile Device Near Other Electronic Devices
Most modern electronic equipment is shielded from Radio Frequency
(RF) signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless mobile device.
Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless mobile device and an implantable
medical device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
•
Should ALWAYS keep the mobile device more than six (6) inches from their
implantable medical device when the mobile device is turned ON;
•
•
Should not carry the mobile device in a breast pocket;
Should use the ear opposite the implantable medical device to minimize the
potential for interference;
209
•
•
Should turn the mobile device OFF immediately if there is any reason to
suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using your
wireless mobile device with an implantable medical device, consult your
health care provider.
For more information see: http://www.fcc.gov/oet/rfsafety/rf-faqs.html#
.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately shielded
from external RF energy. Your physician may be able to assist you in
obtaining this information. Switch your mobile device off in health
care facilities when any regulations posted in these areas instruct you
to do so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer or
its representative regarding your vehicle before using your mobile
device in a motor vehicle. You should also consult the manufacturer
of any equipment that has been added to your vehicle.
Posted Facilities
Switch your mobile device off in any facility where posted notices
require you to do so.
Health and Safety Information
210
Potentially Explosive Environments
Switch your mobile device off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks in
such areas could cause an explosion or fire resulting in bodily injury
or even death. Users are advised to switch the mobile device off while
at a refueling point (service station). Users are reminded of the need
to observe restrictions on the use of radio equipment in fuel depots
(fuel storage and distribution areas), chemical plants, or where
blasting operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. They include
below deck on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or butane), areas
where the air contains chemicals or particles, such as grain, dust, or
metal powders, and any other area where you would normally be
advised to turn off your vehicle engine.
211
FCC Hearing Aid Compatibility (HAC) Regulations
for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the exception
of wireless mobile devices under the Hearing Aid Compatibility Act of
1988 (HAC Act) to require digital wireless mobile devices be
compatible with hearing aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing disabilities.
While some wireless mobile devices are used near some hearing
devices (hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and mobile devices
also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system for
wireless mobile devices to assist hearing device users find mobile
devices that may be compatible with their hearing devices. Not all
mobile devices have been rated. Mobile devices that are rated have
the rating on their box or a label located on the box.
Health and Safety Information
212
The ratings are not guarantees. Results will vary depending on the
user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to use
a rated mobile device successfully. Trying out the mobile device with
your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Mobile devices rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing devices than
mobile devices that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements and
are likely to generate less interference to hearing devices than mobile
devices that are not labeled. T4 is the better/higher of the two ratings.
Hearing devices may also be rated. Your hearing device manufacturer
or hearing health professional may help you find this rating. Higher
ratings mean that the hearing device is relatively immune to
interference noise. The hearing aid and wireless mobile device rating
values are then added together.
213
A sum of 5 is considered acceptable for normal use. A sum of 6 is
considered for best use.
T3
+
T2
=
5
M3
+
M2
=
5
In the above example, if a hearing aid meets the M2 level rating and
the wireless mobile device meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This should
provide the hearing aid user with “normal usage” while using their
hearing aid with the particular wireless mobile device.
“Normal usage” in this context is defined as a signal quality that is
acceptable for normal operation. The M mark is intended to be
synonymous with the U mark. The T mark is intended to be
synonymous with the UT mark. The M and T marks are
recommended by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced in Section 20.19
of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Health and Safety Information
214
Restricting Children's Access to Your
Mobile Device
Your mobile device is not a toy. Do not allow children to play with it
because they could hurt themselves and others, damage the mobile
device, or make calls that increase your mobile device bill.
Keep the mobile device and all its parts and accessories out of the
reach of small children.
FCC Notice and Cautions
FCC Notice
The mobile device may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to stop
using the mobile device if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane)
must comply with the National Fire Protection Standard (NFPA-58).
For a copy of this standard, contact the National Fire Protection
Association.
Cautions
Any changes or modifications to your mobile device not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment. Only
use approved batteries, antennas, and chargers. The use of any
unauthorized accessories may be dangerous and void the mobile
device warranty if said accessories cause damage or a defect to the
mobile device. Although your mobile device is quite sturdy, it is a
215
complex piece of equipment and can be broken. Avoid dropping,
hitting, bending, or sitting on it.
Other Important Safety Information
•
Only qualified personnel should service the mobile device or install the
mobile device in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty applicable to the device.
•
•
•
•
Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted.
Check regularly that all wireless mobile device equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials in the
same compartment as the mobile device, its parts, or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including installed or portable
wireless equipment near or in the area over the air bag or in the air bag
deployment area. If wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
•
•
Switch your mobile device off before boarding an aircraft. The use of
wireless mobile devices in aircraft is illegal and may be dangerous to the
aircraft's operation. Check with appropriate authorities before using any
function of a mobile device while on an aircraft.
Failure to observe these instructions may lead to the suspension or denial
of cell phone services to the offender, or legal action, or both.
Health and Safety Information
216
Section 13: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants that SAMSUNG's handsets and accessories ("Products") are
free from defects in material and workmanship under normal use and
service for the period commencing upon the date of purchase by the
first consumer purchaser and continuing for the following specified
period of time after that date:
Phone
1 Year
1 Year
90 Days
1 Year
Batteries
Case/Pouch/Holster
Other Phone Accessories
What is Not Covered?
This Limited Warranty is conditioned upon proper use of the Product. This
Limited Warranty does not cover: (a) defects or damage resulting from
accident, misuse, abnormal use, abnormal conditions, improper storage,
exposure to liquid, moisture, dampness, sand or dirt, neglect, or unusual
physical, electrical or electromechanical stress; (b) scratches, dents and
cosmetic damage, unless caused by SAMSUNG; (c) defects or damage
resulting from excessive force or use of a metallic object when pressing on a
217
touch screen; (d) equipment that has the serial number or the enhancement
data code removed, defaced, damaged, altered or made illegible; (e) ordinary
wear and tear; (f) defects or damage resulting from the use of Product in
conjunction or connection with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (g) defects or damage
resulting from improper testing, operation, maintenance, installation, service,
or adjustment not furnished or approved by SAMSUNG; (h) defects or damage
resulting from external causes such as collision with an object, fire, flooding,
dirt, windstorm, lightning, earthquake, exposure to weather conditions, theft,
blown fuse, or improper use of any electrical source; (i) defects or damage
resulting from cellular signal reception or transmission, or viruses or other
software problems introduced into the Product; or (j) Product used or
purchased outside the United States. This Limited Warranty covers batteries
only if battery capacity falls below 80% of rated capacity or the battery leaks,
and this Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by SAMSUNG for
charging the battery; (ii) any of the seals on the battery are broken or show
evidence of tampering; or (iii) the battery has been used in equipment other
than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations?
During the applicable warranty period, provided the Product is
returned in accordance with the terms of this Limited Warranty,
SAMSUNG will repair or replace the Product, at SAMSUNG'S sole
option, without charge. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product, or may replace the Product with a rebuilt,
Warranty Information
218
reconditioned or new Product. Repaired/replaced cases, pouches
and holsters will be warranted for a period of ninety (90) days. All
other repaired/replaced Products will be warranted for a period equal
to the remainder of the original Limited Warranty on the original
Product or for ninety (90) days, whichever is longer. All replaced
Products, parts, components, boards and equipment shall become
the property of SAMSUNG. Except to any extent expressly allowed by
applicable law, transfer or assignment of this Limited Warranty is
prohibited.
What must you do to obtain warranty service?
To obtain service under this Limited Warranty, you must return the
Product to an authorized phone service facility in an adequate
container for shipping, accompanied by the sales receipt or
comparable proof of sale showing the original date of purchase, the
serial number of the Product and the seller's name and address. To
obtain assistance on where to deliver the Product, please call
SAMSUNG Customer Care at 1-888-987-4357. If SAMSUNG
determines that any Product is not covered by this Limited Warranty,
you must pay all parts, shipping, and labor charges for the repair or
return of such Product.
You should keep a separate backup copy of any contents of the
Product before delivering the Product to SAMSUNG for warranty
service, as some or all of the contents may be deleted or reformatted
during the course of warranty service.
219
What Are The Limits On SAMSUNG’s liability?
THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF SAMSUNG'S
RESPONSIBILITIES, AND THE EXCLUSIVE REMEDY REGARDING THE
PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL SAMSUNG BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR FOR, WITHOUT
LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF USE, TIME, DATA,
REPUTATION, OPPORTUNITY, GOODWILL, PROFITS OR SAVINGS;
INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES; OR DAMAGES ARISING FROM THE USE OR INABILITY TO USE THE
PRODUCT. SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE DISCLAIMER OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS AND DISCLAIMERS MAY NOT APPLY TO YOU.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY
SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH THE PRODUCT, OR
THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS
INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE.
RESPONSIBILITY FOR THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
Warranty Information
220
EQUIPMENT RESTS SOLELY WITH THE USER AND THE DIRECT VENDOR,
OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.
Nothing in the Product instructions or information shall be construed to create
an express warranty of any kind with respect to the Products. No agent,
employee, dealer, representative or reseller is authorized to modify or extend
this Limited Warranty or to make binding representations or claims, whether
in advertising, presentations or otherwise, on behalf of SAMSUNG regarding
the Products or this Limited Warranty.
This Limited Warranty gives you specific legal rights, and you may also have
other rights that vary from state to state.
What is the procedure for resolving disputes?
ALL DISPUTES WITH SAMSUNG ARISING IN ANY WAY FROM THIS
LIMITED WARRANTY OR THE SALE, CONDITION OR PERFORMANCE
OF THE PRODUCTS SHALL BE RESOLVED EXCLUSIVELY THROUGH
FINAL AND BINDING ARBITRATION, AND NOT BY A COURT OR JURY.
Any such dispute shall not be combined or consolidated with a
dispute involving any other person's or entity's Product or claim, and
specifically, without limitation of the foregoing, shall not under any
circumstances proceed as part of a class action. The arbitration
shall be conducted before a single arbitrator, whose award may not
exceed, in form or amount, the relief allowed by the applicable law.
The arbitration shall be conducted according to the American
Arbitration Association (AAA) Commercial Arbitration Rules applicable
to consumer disputes. This arbitration provision is entered pursuant
to the Federal Arbitration Act. The laws of the State of Texas, without
221
reference to its choice of laws principles, shall govern the
interpretation of the Limited Warranty and all disputes that are
subject to this arbitration provision. The arbitrator shall decide all
issues of interpretation and application of this arbitration provision
and the Limited Warranty.
For any arbitration in which your total damage claims, exclusive of
attorney fees and expert witness fees, are $5,000.00 or less ("Small
Claim"), the arbitrator may, if you prevail, award your reasonable
attorney fees, expert witness fees and costs as part of any award, but
may not grant SAMSUNG its attorney fees, expert witness fees or
costs unless it is determined that the claim was brought in bad faith.
In a Small Claim case, you shall be required to pay no more than half
of the total administrative, facility and arbitrator fees, or $50.00 of
such fees, whichever is less, and SAMSUNG shall pay the remainder
of such fees. Administrative, facility and arbitrator fees for
arbitrations in which your total damage claims, exclusive of attorney
fees and expert witness fees, exceed $5,000.00 ("Large Claim") shall
be determined according to AAA rules. In a Large Claim case, the
arbitrator may grant to the prevailing party, or apportion among the
parties, reasonable attorney fees, expert witness fees and costs.
Judgment may be entered on the arbitrator's award in any court of
competent jurisdiction.
This arbitration provision also applies to claims against SAMSUNG'S
employees, representatives and affiliates if any such claim arises
from the Product's sale, condition or performance.
Warranty Information
222
You may opt out of this dispute resolution procedure by providing notice
to SAMSUNG no later than 30 calendar days from the date of the first
consumer purchaser's purchase of the Product. To opt out, you must
send notice by e-mail to [email protected], with the subject
line: "Arbitration Opt Out." You must include in the opt out e-mail (a)
your name and address; (b) the date on which the Product was
purchased; (c) the Product model name or model number; and (d) the
IMEI or MEID or Serial Number, as applicable, if you have it (the IMEI or
MEID or Serial Number can be found (i) on the Product box; (ii) on the
Product information screen, which can be found under "Settings;" (iii)
on a label on the back of the Product beneath the battery, if the battery
is removable; and (iv) on the outside of the Product if the battery is not
removable). Alternatively, you may opt out by calling 1-888-987-4357
no later than 30 calendar days from the date of the first consumer
purchaser's purchase of the Product and providing the same
information. These are the only two forms of notice that will be
effective to opt out of this dispute resolution procedure. Opting out of
this dispute resolution procedure will not affect the coverage of the
Limited Warranty in any way, and you will continue to enjoy the benefits
of the Limited Warranty.
Severability
If any portion of this Limited Warranty is held to be illegal or
unenforceable, such partial illegality or unenforceability shall not
affect the enforceability of the remainder of the Limited Warranty.
223
Samsung Telecommunications America, LLC
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America, LLC. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval.
Specifications and availability subject to change without notice.
[060111]
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual or a
single entity) and Samsung Electronics Co., Ltd. for software owned
by Samsung Electronics Co., Ltd. and its affiliated companies and its
third party suppliers and licensors that accompanies this EULA, which
includes computer software and may include associated media,
printed materials, "online" or electronic documentation ("Software").
BY CLICKING THE "I ACCEPT" BUTTON (OR IF YOU BYPASS OR
OTHERWISE DISABLE THE "I ACCEPT", AND STILL INSTALL, COPY,
DOWNLOAD, ACCESS OR OTHERWISE USE THE SOFTWARE), YOU
AGREE TO BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE "DECLINE"
BUTTON, AND DISCONTINUE USE OF THE SOFTWARE.
Warranty Information
224
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this EULA:
You may install, use, access, display and run one copy of the
Software on the local hard disk(s) or other permanent storage media
of one computer and use the Software on a single computer or a
mobile device at a time, and you may not make the Software
available over a network where it could be used by multiple
computers at the same time. You may make one copy of the Software
in machine-readable form for backup purposes only; provided that
the backup copy must include all copyright or other proprietary
notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves all
rights not expressly granted to you in this EULA. The Software is
protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and other
intellectual property rights in the Software. The Software is licensed,
not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse engineer,
decompile, disassemble, or otherwise attempt to discover the source
code or algorithms of, the Software (except and only to the extent that
such activity is expressly permitted by applicable law notwithstanding
this limitation), or modify, or disable any features of, the Software, or
create derivative works based on the Software. You may not rent,
lease, lend, sublicense or provide commercial hosting services with
the Software.
225
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as part
of the product support services related to the Software provided to
you, if any, related to the Software. Samsung may use this
information solely to improve its products or to provide customized
services or technologies to you and will not disclose this information
in a form that personally identifies you.
5. UPGRADES. This EULA applies to updates, supplements and add-
on components (if any) of the Software that Samsung may provide to
you or make available to you after the date you obtain your initial
copy of the Software, unless we provide other terms along with such
upgrade. To use Software identified as an upgrade, you must first be
licensed for the Software identified by Samsung as eligible for the
upgrade. After upgrading, you may no longer use the Software that
formed the basis for your upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it is in
connection with the sale of the mobile device which the Software
accompanied. In such event, the transfer must include all of the
Software (including all component parts, the media and printed
materials, any upgrades, this EULA) and you may not retain any
copies of the Software. The transfer may not be an indirect transfer,
such as a consignment. Prior to the transfer, the end user receiving
the Software must agree to all the EULA terms.
Warranty Information
226
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that apply
to the Software, including the U.S. Export Administration Regulations,
as well as end user, end use, and destination restrictions issued by
U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your rights
under this License will terminate automatically without notice from
Samsung if you fail to comply with any of the terms and conditions of
this EULA. Upon termination of this EULA, you must cease all use of
the Software and destroy all copies, full or partial, of the Software.
9. THIRD-PARTY APPLICATIONS. Certain third-party applications may
be included with, or downloaded to this mobile device. SAMSUNG
makes no representations whatsoever about any of these
applications. Since SAMSUNG has no control over such applications,
Purchaser acknowledges and agrees that SAMSUNG is not
responsible for the availability of such applications and is not
responsible or liable for any content, advertising, products, services,
or other materials on or available from such applications. Purchaser
expressly acknowledges and agrees that use of third-party
applications is at Purchaser's sole risk and that the entire risk of
unsatisfactory quality, performance, accuracy and effort is with
Purchaser. It is up to Purchaser to take precautions to ensure that
whatever Purchaser selects to use is free of such items as viruses,
worms, Trojan horses, and other items of a destructive nature.
References on this mobile device to any names, marks, products, or
227
services of any third-parties are provided solely as a convenience to
Purchaser, and do not constitute or imply an endorsement,
sponsorship, or recommendation of, or affiliation with the third-party
or its products and services. Purchaser agrees that SAMSUNG shall
not be responsible or liable, directly or indirectly, for any damage or
loss caused or alleged to caused by, or in connection with, use of or
reliance on any such third-party content, products, or services
available on or through any such application. Purchaser
acknowledges and agrees that your use of any third-party application
is governed by such third-party application provider's Terms of Use,
License Agreement, Privacy Policy, or other such agreement and that
any information or personal data you provide, whether knowingly or
unknowingly, to such third-party application provider, will be subject
to such third-party application provider's privacy policy, if such a
policy exists. SAMSUNG DISCLAIMS ANY RESPONSIBILITY FOR ANY
DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF ANY
THIRD-PARTY APPLICATION PROVIDER.
10. Disclaimer of Warranty Regarding Third-Party Applications.
SAMSUNG DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS
REGARDING THE AVAILABILITY, USE, TIMELINESS, SECURITY,
VALIDITY, ACCURACY, OR RELIABILITY OF, OR THE RESULTS OF THE
USE OF, OR OTHERWISE RESPECTING, THE CONTENT OF ANY THIRD-
PARTY APPLICATION WHETHER SUCH THIRD-PARTY APPLICATION IS
INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG, IS
DOWNLOADED, OR OTHERWISE OBTAINED. USE OF ANY THIRD-
PARTY APPLICATION IS DONE AT PURCHASER'S OWN DISCRETION
Warranty Information
228
AND RISK AND PURCHASER IS SOLELY RESPONSIBLE FOR ANY
DAMAGE TO YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS
FROM THE DOWNLOADING OR USE OF SUCH THIRD-PARTY
APPLICATIONS. SAMSUNG EXPRESSLY DISCLAIMS ANY WARRANTY
REGARDING WHETHER PURCHASER'S PERSONAL INFORMATION IS
CAPTURED BY ANY THIRD-PARTY APPLICATION PROVIDER OR THE
USE TO WHICH SUCH PERSONAL INFORMATION MAY BE PUT BY SUCH
THIRD-PARTY APPLICATION PROVIDER. ANY THIRD-PARTY
APPLICATIONS PROVIDED WITH THIS MOBILE DEVICE ARE PROVIDED
"AS IS" AND ON AN "AS AVAILABLE" BASIS, WITHOUT WARRANTIES
OF ANY KIND FROM SAMSUNG, EITHER EXPRESS OR IMPLIED. TO
THE FULLEST EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW,
SAMSUNG DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR
WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE,
RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES, QUIET
ENJOYMENT, NON-INFRINGEMENT OF THIRD PARTY RIGHTS OR
OTHER VIOLATION OF RIGHTS. SAMSUNG DOES NOT WARRANT
AGAINST INTERFERENE WITH YOUR ENJOYMENT OF THE THRID-
PARTY APPLICATION, THAT THE FUNCTIONS CONTAINED IN THE
THIRD-PARTY APPLICATION WILL MEET PURCHASER'S
REQUIREMENTS, THAT THE OPERATION OF THE THIRD-PARTY
APPLICATION WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT
DEFECTS IN THE THIRD-PARTY APPLICATION WILL BE CORRECTED.
PURCHASER ASSUMES THE ENTIRE COST OF ALL NECESSARY
229
SERVICING, REPAIR, OR CORRECTION. SOME JURISDICTIONS DO
NOT ALLOW EXCLUSIONS OR LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION,
WHETHER ORAL OR WRITTEN, OBTAINED BY PURCHASER FROM
SAMSUNG SHALL BE DEEMED TO ALTER THIS DISCLAIMER OF
WARRANTY REGARDING THIRD-PARTY APPLICATIONS, OR TO CREATE
ANY WARRANTY.
11. Limitation of Liability. SAMSUNG WILL NOT BE LIABLE FOR ANY
DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO THE USE
OR THE INABILITY TO USE ANY THIRD-PARTY APPLICATION, ITS
CONTENT OR FUNCTIONALITY, INCLUDING BUT NOT LIMITED TO
DAMAGES CAUSED BY OR RELATED TO ERRORS, OMISSIONS,
INTERRUPTIONS, DEFECTS, DELAY IN OPERATION OR
TRANSMISSION, COMPUTER VIRUS, FAILURE TO CONNECT, NETWORK
CHARGES, AND ALL OTHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES EVEN IF SAMSUNG HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
NOTWITHSTANDING THE FOREGOING, SAMSUNG'S TOTAL LIABILITY
TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES OF ACTION,
INCLUDING BUT NOT LIMITED TO THOSE BASED ON CONTRACT,
TORT, OR OTHERWISE, ARISING OUT OF PURCHASER'S USE OF
THIRD-PARTY APPLICATIONS ON THIS MOBILE DEVICE, OR ANY
Warranty Information
230
OTHER PROVISION OF THIS EULA, SHALL NOT EXCEED THE AMOUNT
PURCHASER PAID SPECIFICALLY FOR ANY SUCH THIRD-PARTY
APPLICATION THAT WAS INCLUDED WITH THIS MOBILE DEVICE. THE
FOREGOING LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS
(INCLUDING SECTIONS 9, 10, AND 11) SHALL APPLY TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY
REMEDY FAILS ITS ESSENTIAL PURPOSE.
12. U.S. GOVERNMENT END USERS. The Software is licensed only
with "restricted rights" and as "commercial items" consisting of
"commercial software" and "commercial software documentation"
with only those rights as are granted to all other end users pursuant
to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of TEXAS,
without regard to conflicts of laws principles. This EULA shall not be
governed by the UN Convention on Contracts for the International Sale
of Goods, the application of which is expressly excluded. If a dispute,
controversy or difference is not amicably settled, it shall be finally
resolved by arbitration in Seoul, Korea in accordance with the
Arbitration Rules of the Korean Commercial Arbitration Board. The
award of arbitration shall be final and binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software and
supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to the
Software or any other subject matter covered by this EULA. If any
231
provision of this EULA is held to be void, invalid, unenforceable or
illegal, the other provisions shall continue in full force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve and
reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear which
will eliminate all user memory and return all settings to default
settings. Please contact the Samsung Customer Care Center for
details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s
Customer Care Center in order to provide this service at no charge. If
the warranty has expired on the device, charges may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
Warranty Information
232
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad, dial
the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change without
notice.
233
Camera
Brightness 108
Options 101
Save Pictures 101
Screen Icons 100
Zoom 109
Card Memory
Formatting 176
Management 173
Care and Maintenance 203
Changing Your Settings 149
Children and Cell Phones 185
Contacts 62
Adding a New Contacts Entry 63
Edit Name and Numbers 67
Opening 63
Save a Number After a Call 73
Contacts List
Memory 78
Create Messages 79
236
Creating and Sending New Messages
Text 79
D
Dialed calls log 54
Display / Touch-Screen 198
Display Screen Icons 27
Backlight 156
Banner 155
Wallpaper 157
Do cell phones pose a health hazard? 178
E
Emergency Calls 201
Erase Logs 58
Exposure to Radio Frequency (RF) Signals 178
F
FCC Hearing Aid Compatibility (HAC) Regulations for Wireless
Devices 212
FCC Notice and Cautions 215
237
Phone
View, Camera 23
View, Front 21
View, Side 22
Phone Memory
Phone Settings 159
Airplane Mode 159
Language 160
System Select 166
Photos
Sending 113
Picture Messages
Receiving 86
Send in Camera Mode 81
Q
R
Quality, pictures 106
Receive Messages in Call 81
Receive Picture Messages 86
Receive Text Messages 81
Reducing Exposure
Hands-Free Kits and Other Accessories 183
241
Responsible Listening 205
Restricting Children's Access to Your Mobile device 215
Return to Previous Menu 32
Review Calls 59
S
Samsung Mobile Products and Recycling 195
Save a Number After a Call 73
Security Settings 161
Emergency # 163
Lock Phone 164
Resetting Your Phone 165
Restriction 162
Settings
Alerts 153
Auto Retry 168
Backlight 156
Banner 155
Call 168
Call Settings 168
Dialing Font Size 157
Display 155
Keypad Volume 154
242
Smart Practices While Driving 190
Sound Settings
Alerts 153
Keypad Volume 154
Ringer Type 152
Volume/Vibrate 151
Specific Absorption Rate (SAR) Certification Information 187
Standard Limited Warranty
217
Standby Mode 35
T
Taking pictures 95
Talk Mode 35
Three-Way Calling 41
Timers
Tip, description 6
Tools 134
Tools Menu 134
TTY Mode 169
244
|