Samsung SCH R261 User Manual

SCH-R261  
P O R T A B L E  
T R I - B A N D  
M O B I L E  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
®
®
Nuance , VSuite, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its  
affiliates in the United States and/or other countries.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered  
trademarks and are wholly owned by the Bluetooth SIG.  
microSD™ and the microSD logo are Trademarks of the SD Card Association.  
Open Source Software  
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General  
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open  
source licenses, please visit:  
.
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE  
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
Table of Contents  
1
2
Section 1: Getting Started  
This section explains how to start using your Samsung  
SCH-R261 phone by activating your service, setting up your  
Voicemail, or getting an understanding of how this manual is put  
together.  
Important: Points out important information about the current feature  
that could affect performance, or even damage your phone.  
Caution: Warns of potential damage to the phone.  
Text Conventions  
This manual provides condensed information about how to use  
your phone. To make this possible, the following terms and icon  
display in place of repeatedly-used procedural steps:  
Understanding this Manual  
The chapters of this guide generally follow the same order as the  
menus and sub-menus in your phone. A robust index for quick  
reference to most features begins on page 127.  
This manual provides condensed information about how to use  
your phone. To make this possible, the following terms and icon  
display in place of repeatedly-used procedural steps:  
Also included is important safety information that you should  
know before using your phone. Most of this information is near  
the back of the guide, beginning on page 99.  
Notes and Tips  
highlight Use the Navigation key (  
) to move a  
highlighting effect onto a menu item or screen  
item of interest.  
Throughout this guide there is text that is set apart from the rest.  
These are intended to point out important information, quick  
methods for activating features, to define terms, and more. The  
definitions for these methods are as follows:  
select  
After “highlighting” a menu item or screen item,  
press the OK key (  
) to launch, access, or save  
Notes: Explain alternative options within the current feature, menu, or  
sub-menu.  
a highlighted menu item or screen field of  
interest.  
Tips: Provide quick or innovative methods for performing functions  
related to the subject at hand.  
4
     
Used in place of “select” in long “drill down”  
procedure steps.  
Example: Select Settings  
Call Settings  
Call Answer.  
Installing the Battery  
Note: Your phone comes packaged with a partially charged rechargeable  
standard Li-Ion battery and travel adapter.  
Important!: You must fully charge the battery the first time you use your  
phone, otherwise you could damage the battery.  
3. Insert the top end of the battery first, aligning the gold  
1. Grasp the device firmly and locate the cover release latch.  
contacts on the inside of the battery to those on the phone.  
2. Place your fingernail in the opening and firmly “pop” the  
4. Press lightly on the bottom end of the battery down into the  
cover off the device.  
phone until it slips into place.  
Getting Started  
5
   
Removing the Battery  
1. Press and hold  
to turn off the phone.  
2. Grasp the device firmly and locate the cover release latch.  
3. Place your fingernail in the opening and firmly “pop” the  
cover off the device.  
5. Place the battery cover back over the battery (1) and press  
down lightly (2) until it clicks into place.  
6
   
41.  
Lift the bottom of the battery up (1) and away (2) from the  
phone.  
                         
                          
                           
                             
                              
                                
                                   
                                     
                                      
                                       
                                         
                                          
                                              
                                                
                                                  
                                                   
                                                     
                                                        
                                                          
                                                            
                                                             
                                                              
                                                                
                                                                 
                                                                    
                                                                      
                                                                         
                                                                          
                                                                            
                                                                              
                                                                                
                                                                                  
                                                                                     
                                                                                       
                                                                                         
                                                                                           
                                                                                              
                                                                                               
                                                                                                 
                                                                                                   
                                                                                                    
                                                                                                     
                                                                                                       
                                                                                                           
                                                                                                            
                                                                                                              
Caution!: For connection to an electrical supply not located in North America,  
you must use an adaptor of the proper configuration for the power  
outlet. Use of the wrong adapter could damage your phone and  
void your warranty.  
2. Insert the smaller end of the Travel Adapter into the  
charger/accessory connector on the right side of your  
phone.  
Charging the Battery  
Incorrect  
Your phone is powered by a rechargeable standard Li-Ion battery.  
Only use Samsung-approved charging devices and batteries.  
Samsung accessories are designed to maximize battery life. Use  
of other accessories may invalidate your warranty and may cause  
damage.  
Correct  
Use the Travel Adapter  
The travel adapter included with your phone is a convenient,  
light-weight charger that rapidly charges your phone from any  
120/220 VAC outlet.  
Caution!: You must unplug the adapter before removing the battery from the  
1. Plug the large end of the Travel Adapter into a standard  
phone during charging to avoid damage.  
120 VAC or 220 VAC wall outlet.  
Getting Started  
7
     
Low Battery Indicator  
Note: If you are outside of your carrier’s coverage or roaming area, the No  
Service icon (  
) displays at the top of the phone’s screen. If you  
The battery indicator (  
display indicates power level. Monitor the battery strength and  
ensure your battery is adequately charged.  
) in the upper-right corner of the  
cannot place or receive calls, try later when service is available, or at  
another location.  
Turning Off Your Phone  
Three bars (  
) indicate a full charge.  
1. If closed, open your phone.  
An empty battery icon (  
) indicates a near empty battery.  
) and a tone sounding  
2. Press and hold  
for two or more seconds. Your phone  
A blinking empty battery icon (  
indicate you have two to three minutes before the battery is too  
low to operate the phone.  
powers off.  
Note: If your phone is on and you press  
for less than one second, the  
phone will not power off. This prevents your phone from being turned  
off accidentally.  
If you continue to use your phone without charging its battery, the  
phone will shut down.  
Activating Your Phone  
Setting Up Your Voicemail  
Contact your Wireless Carrier and follow their instructions for  
obtaining service, if necessary. We suggest that you read this  
guide to fully understand the services your phone supports.  
Voicemail allows callers to leave voice messages, which are  
retrievable any time.  
Note: Once your Voicemail account has been set up, you can use the  
Voicemail folder (under the Message menu) to view details of voice  
messages in your Voicemail box.  
Turning On Your Phone  
1. If closed, open your phone, as shown.  
2. Press  
. The display lights.  
To dial Voicemail:  
The phone begins searching for a network signal.  
1. In standby mode, press and hold  
or dial your own  
Once the phone finds a signal, the time, date, and day display at  
the top of the screen.  
mobile number.  
You can place and receive calls.  
8
           
2. Follow the prompts in the new user tutorial to setup your  
mail box.  
Listen to Voicemail  
In standby mode, press and hold  
or dial your own  
mobile number to dial Voicemail. After connecting, you will  
hear your voice greeting. You are prompted to enter your  
password.  
Getting Started  
9
 
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also  
describes the screen format and the icons that display when the  
phone is in use.  
Open View (Front) of the Phone  
Features of Your Phone  
Domestic and international voice and text messaging service (available  
on participating networks).  
High speed data (CDMA 2000 1x Technology)  
Bluetooth® Wireless Technology (see Note)  
Global Positioning System (GPS) Technology  
PIM Functions  
Picture (MMS) Messaging  
Text (SMS) Messaging  
Email Messaging  
Built-in VGA Digital Camera  
Voice Dial  
Note: The R261 phone supports the wireless Headset, Handsfree, Object  
Push, File Transfer, and Phone Access profiles for Bluetooth® wireless  
0
10  
     
Features  
9. Voice Recognition Key: Used to launch Voice SVC voice  
recognition system.  
1. Earpiece: Lets you hear ringing and alert tones, alarm  
tones, and other parties during calls.  
10. Alpha-numeric Keys: Use these keys to enter numbers,  
letters, and characters.  
2. Main Display: Indicates the status of your phone, including  
numbers dialed, feature and function screens, status  
icons, message indicators and contents, signal strength,  
and so on.  
11. CLR Key: Deletes characters from the display when you are  
in text entry mode. Press this key to return to the previous  
menu or screen when navigating features on the phone.  
3. OK Key: Pressing when navigating through a menu accepts  
12. END Key: Ends a call. If you press and hold the END key, the  
power turns On or Off. When you receive an incoming call,  
press to send the call to voicemail.  
the highlighted choice in a menu.  
4. Left Soft Key: Used to navigate through menus and  
applications and to select the choice indicated at the  
bottom left corner of the Main LCD.  
13. Right Soft Key: Used to navigate through menus and  
applications and to select the choice indicated at the  
bottom right corner of the Main Display.  
5. SEND Key: Lets you place or receive a call. In standby  
mode, press the key once to access the recent calls log.  
14. Navigation Key: In Menu mode, lets you scroll through the  
phone menu options. In Standby mode, lets you access  
preset functions and one user-defined function.  
6. Voicemail Key: Lets you speed dial your Voicemail account  
to review your voice messages.  
7. Special Function Keys: Enter special characters. Perform  
various functions.  
8. Microphone: Lets the other caller hear you clearly when  
you are speaking to them.  
Understanding Your Phone  
11  
 
Closed View (Front) of Your Phone Features  
Side Views of Your Phone  
4
3
2
1
2
1
1. Volume Key: Lets you adjust the ring volume in standby  
mode, adjust the voice volume during a call, or mute the  
ringer during an incoming call.  
1. Camera lens: Used to focus the subject when taking a  
picture.  
2. Front Display: Indicates the status of your phone, including  
status icons, message indicators, signal strength, and  
so on.  
2. Power / Accessory Connector: Used to connect an optional  
headset (for hands free operation), or optional TTY device,  
charging accessories, or optional accessory cables to your  
phone.  
12  
   
3. Camera Key: Launches the Camera feature of your phone  
OK Key  
In standby mode, press the OK key (  
In a menu, press  
) to launch the Main menu.  
to accept the highlighted selection.  
to take a photo or to create a Picture  
and takes photos.  
4. Accessory slot: Used to connect a carrying strap to the  
In camera mode, press  
message.  
phone.  
Command Keys  
Functions for the soft keys are defined by what displays above  
When the OK key function is Edit, press the Edit key (  
Draft message.  
) to edit a  
each on the screen. There are two soft keys, Left (  
Right ( ).  
) and  
Send Key  
The Send key (  
recall the last number(s) dialed, received, or missed.  
) is used to answer calls, dial calls, and to  
Left Soft Key  
Press  
Enter a number and briefly press  
Briefly press in standby mode to display a list of recent calls to  
and from your phone.  
once to answer calls.  
Some functions of the Left soft key (  
) are as follows:  
to make a call.  
In standby mode, press the Messages soft key (  
) to launch the  
Messages menu.  
When the Left soft key function is Edit, press the Edit soft key (  
) to  
edit a Contacts entry.  
Press  
Press  
to the other call.  
twice in standby mode to call the most recent number.  
to pick up a waiting call. Press  
again to switch back  
Right Soft Key  
Some functions of the Right soft key (  
) are as follows:  
) to launch the  
Clear Key  
In standby mode, press the Contacts soft key (  
Contacts Find screen.  
When the Right soft key function is Options, press the Options soft key  
) and a pop-up menu displays.  
The CLR key (  
) is used to erase or clear numbers, text, or  
symbols from the display. You can also use the key to return to a  
previous menu or to return to standby mode from any menu.  
(
If you enter an incorrect character, briefly press  
(and delete) the character.  
to backspace  
Understanding Your Phone  
13  
   
Press and hold  
Briefly press  
t
o erase the entire sentence.  
Understanding the Display Screen  
1. The top line of your phone’s  
screen contains icons that  
to back up one menu level.  
End Key  
Press and hold the End key  
to turn your phone on or off.  
indicate network status,  
Briefly press  
Press  
once to disconnect a call.  
battery power, signal strength,  
connection type, and more.  
to return to standby mode from any menu, or to cancel the  
last input.  
2. The Main Clock displays the  
Navigation Key  
day, date, and time.  
Use the directional keys on the Navigation key (  
menus, sub-menus, and lists. Each directional key also acts as a  
shortcut to launch applications.  
) to browse  
3. The center portion of the  
screen displays information such as call progress  
information, messages, and photos.  
Camera Key  
4. The bottom line of the screen displays current soft key  
Use the Camera key (  
) on the right side of the phone to  
activate the camera built into your phone and to take pictures.  
functions.  
The sample screen displays the Left (Messages) soft key  
launches the Messages menu, pressing Menu  
(
)
launches the Widget highlighted in the quick access menu,  
and pressing the Right (Contacts) soft key displays the  
Contacts Find screen.  
14  
   
Display Screen Icons  
Menu Navigation  
Your R261 phone displays a table of definitions for the icons that  
display on the top line of the screen.  
Access the menus and sub menus in your phone using the  
navigation key (  
shortcut.  
) and soft keys (  
), or use a  
To access the Icon Glossary:  
1. In standby mode, press  
Menu. The first of several  
In standby mode, press  
Info Icon Glossary. A table of icons and definitions for the  
icons that display on the top line of the screen displays.  
, then select Settings  
Phone  
menus displays on the screen.  
Tip: You can launch any of the Main Menus by using a voice command — In  
standby mode, press and hold  
until the phone prompts, “Say a  
Dialogue Boxes  
command.” Say “Go to” followed by a Main Menu name into the  
microphone. For example, Say “Go to Multimedia” to access the  
Multimedia menu.  
Dialogue boxes prompt for action, inform you of status, or warn  
of situations such as low battery. Example: “Save Message?”  
2. Use the navigation key to browse through the menus.  
Backlights  
Backlights illuminate the display and the keypad. When you press  
any key or open the phone, the backlights display. The backlight  
turns off when there is no keypad activity, or the screen is idle for  
a period of time set in the Backlight menu.  
3. Press  
the screen.  
to enter the menu or sub menu that displays on  
4. Press the Back soft key to return to the previous menu.  
Return to the Previous Menu  
Note: During a phone call, the display backlight dims after 10 seconds and  
turns off after 30 seconds to conserve battery power, regardless of the  
Backlight setting.  
Press the Back soft key to return to a previous menu.  
Press to return to the previous menu when Back does not  
display on the screen.  
Understanding Your Phone  
15  
       
Navigation Key Shortcuts  
Your Phone’s Modes  
In standby mode, press a navigation key to launch the key’s  
corresponding application.  
Standby Mode  
Standby mode is the state of the phone once it has found service  
and is idle. The phone goes into standby mode:  
Create Txt Msg  
After you power on the phone.  
When you press after a call or from within a menu.  
All Calls  
Messages  
In standby mode, you will see the time, day, and date as well as  
all phone status icons.  
Calendar  
Navigate Using a Shortcut  
Placing Calls in Standby Mode  
1. To place a call while in standby mode, enter a phone  
You can also access menus and sub menus using menu  
numbers. After pressing Menu, press the menu number to go  
directly to the menu or sub menu of your choice. Before you can  
navigate using a shortcut, you’ll need the menu or sub-menu  
number that you wish to access.  
number, and press  
.
2. Press to return to standby mode.  
Receiving Messages in Standby Mode  
You can receive messages in standby mode. An alert tone sounds  
and a notification message displays on the screen when a new  
message arrives. The following call message options display:  
1. In standby mode, press  
Menu.  
2. Press the number of the menu, sub menu, and so on for  
View Now: This selection allows you to view the messages now.  
View Later: This selection allows you to view the messages at a  
later date.  
the feature that you wish to access.  
Example: Press  
Menu, then press 8, 1, 2. This takes you to the Tools  
(8) menu, Bluetooth (1) menu, Bluetooth Settings (2) submenu.  
Highlight the desired viewing option and then press  
.
16  
             
Adjusting Your Phone’s Master Volume  
Call Answer Mode  
In standby mode, press the Volume key up or down.  
1. In standby mode, press the Volume key up or down to set  
the call ringer volume as desired.  
You can choose to answer a call by pressing any key except  
or  
, by pressing only  
, or by opening the phone’s flip.  
Talk Mode  
Options are:  
You can place and receive calls only when your phone is on.  
While in a call, your phone is in talk mode. Press the Options soft  
key to display a list of menu options. (For more information, refer  
• Silence All  
• Vibrate  
• Low  
• Medium  
• Medium/High  
• High  
• Low/Medium  
Enter/Exit Vibrate Mode  
Tip: You can add vibration to Master Volume settings Low  
Vib.on  
High. Just press  
Silences the tones your phone plays and vibrates your phone,  
instead.  
.
To set to Vibrate Mode:  
2. When you are satisfied with the setting, press SET. Your  
In standby mode, press and hold  
. “Entering Vibrate  
phone returns to standby mode.  
Mode” briefly displays on the screen and your phone  
Tip: You can also access the Master Volume setting by pressing Menu  
Settings Sound Settings Master Volume. Press the left or right  
navigation key until the desired setting displays, then press Set  
returns to standby mode with the Vibrate icon (  
displaying on the screen.  
)
.
To exit Vibrate Mode:  
Note: The Vibrate icon (  
Vibrate mode. The Vibrate/Ring icon (  
when you press Vib.on with Master Volume set to Low  
) displays on the screen when the phone is in  
) displays on the screen  
High  
While in Vibrate mode and standby mode, press and hold  
. “Exit Vibrate Mode” briefly displays on the screen  
and your phone returns to standby mode.  
.
Understanding Your Phone  
17  
     
The Ring icon (  
) displays on the screen.  
To place your phone in Handsfree mode, do one of the following:  
Connect an optional wired headset.  
– or –  
Tip: You can also set your phone to Vibrate by pressing the Volume key  
) down until “Vibrate” displays on the screen.  
(
Pair and connect with an optional Bluetooth technology headset or  
Speakerphone Mode  
Speakerphone mode increases the sound volume through the  
earpiece during a call. This lets you conduct a call handsfree,  
and/or lets you share a call with others.  
Camera Mode  
Camera mode lets you take pictures with your phone’s camera.  
In Camera mode, you can also adjust the resolution and  
appearance of your pictures.  
To enter Speakerphone Mode:  
1. During a call, press  
SPK.  
2. At the prompt press Yes to turn on the speakerphone.  
Entering Camera Mode: In standby mode, press and hold the Camera  
key ( ).  
Exiting Camera Mode: Press  
Caution!: While in Speakerphone mode, hold your phone away from your ear.  
(For more information, refer to “Responsible Listening” on  
page 111.)  
.
Note: You can also enter Camera mode by pressing  
selecting Multimedia Camera  
Menu and  
.
To exit Speakerphone Mode:  
1. During a call, press  
SPK.  
Input mode  
2. At the prompt press Yes to turn off the speakerphone.  
Input mode determines how you enter text, numbers, and  
symbols. While viewing any text entry screen, press the Left soft  
key, then choose the input mode from the pop-up menu using the  
Handsfree Mode  
Handsfree mode lets you operate your phone remotely, without  
touching it other than to turn it on or off.  
Navigation key. Optional input modes are T9 Word Abc, 123, and  
,
18  
       
Tip: You can cycle between T9 Word  
,
Abc, and 123 by repeatedly pressing  
and holding  
until the phone beeps.  
Lock Mode  
When the phone is in Lock Mode, restrictions are placed on  
phone use. You can receive calls and messages, but cannot place  
outgoing calls (except for emergency numbers) until you unlock  
the phone. Lock Mode also restricts access to menus and the  
Volume key. Unlock your phone by entering the lock code when  
Understanding Your Phone  
19  
 
Section 3: Call Functions  
This section explains how to make and answer calls. This section  
also includes the features and functionality associated with  
making or answering calls.  
You can specify other numbers as emergency numbers using the  
Number Entry Dialing  
1. Turn on the phone and enter the number to call.  
Important!: Emergency number 911 is preset into your phone. You can dial  
this number almost any time, even when the phone is locked or  
restricted.  
2. Press  
to place the call.  
If you call 911 an audible tone plays and an Emergency prompt  
displays on the screen for the duration of the call.  
Dialing Emergency Numbers  
Because of various transmission methods, network parameters,  
and user settings necessary to complete a call from your wireless  
phone, a connection cannot always be guaranteed. Therefore,  
emergency calling may not be available on all wireless networks  
at all times.  
Dialing International Numbers  
Call Another Country — Manual Method  
1. In standby mode, enter 011 (the three-digit exit code for  
the United States).  
2. Enter the country code for the country you are calling.  
Important!: DO NOT depend on this phone as a primary method of calling  
3. Enter the number to dial then press  
.
911 or for any other essential or emergency communications.  
Note: Puerto Rico and Canada are on the North American dialing plan.  
Making calls to Puerto Rico and Canada is similar to making calls  
within the United States, no unique country codes are necessary.  
To place an emergency call:  
1. Turn on the phone and enter 911.  
2. Press  
to place the call.  
20  
       
Call Another Country — Shortcut Method  
To manually call a number with pause(s) without storing to your  
Contacts list:  
1. In standby mode, press and  
1. Enter the number to call.  
hold  
until a plus sign (+)  
2. Press Options. A pop-up menu displays the following  
displays on the screen.  
Note: When you press  
your phone automatically  
manual pause options:  
,
2-Sec Pause: a two-second pause.  
Wait: a hard pause (awaits input from you).  
replaces the + with 011, the  
three-digit exit code for the  
United States.  
3. Highlight the desired pause option and press  
to enter  
the highlighted pause into your number sequence.  
Note: If you select 2-Sec Pause, P displays on the screen. If you select Wait,  
2. Enter the country code for the country that you are calling.  
W displays on the screen.  
3. Enter the number that you wish to call, then press  
.
4. Press  
to call the number.  
Manual Pause Calling  
Pause Dialing From a Contacts Entry  
When you call automated systems (like banking services), you  
are often required to enter a password or account number.  
Instead of manually entering the numbers each time, you can  
store the numbers in your Contacts along with special characters  
called pauses.  
If you speed dial a contact that contains (two-second)  
simply wait for the pauses to pass and the dialing to complete.  
If you speed dial a contact that contains (hard) pause(s), wait for the  
appropriate prompt(s) from the number you are calling (credit card  
number, bank account number, and so on) and enter the appropriate  
response(s).  
P
pause(s)  
W
2-Sec Pause: P pause — A two-second pause stops the calling  
sequence for two seconds and then automatically sends the remaining  
digits.  
Wait: W pause — A hard pause stops the calling sequence until you  
press  
.
Call Functions  
21  
 
Three-Touch Dialing  
Speed Dialing  
Once you store phone numbers to the Contacts List, you can set  
up to 8 speed dial entries and then dial them simply by touching  
the associated numeric key.  
Memory locations 100 through 999 are special Three-Touch  
dialing locations.  
Example: For location number 113, briefly press  
again, then press and hold until the name and number display  
on the screen and the number is dialed.  
, briefly press  
One-Touch Dialing  
Speed Dial numbers 2 through 9 are special One-Touch dialing  
numbers. You can call the phone numbers stored in your phone’s  
Contacts list and assigned Speed Dial numbers 2 through 9 by  
pressing and holding a single key.  
Quick Search Dialing  
Use the Quick Search feature to dial  
any number stored in your Contacts  
list by pressing the number keys that  
correspond to the first few letters of a  
Example: For Speed Dial number 3, press and hold  
until the name and  
number display on the screen and the number is dialed.  
Two-Touch Dialing  
Memory locations 10 through 99 are special Two-Touch dialing  
locations.  
Voice Dialing  
Your R261 mobile phone includes  
voice recognition software that lets  
you dial numbers using your voice.  
Example: For location number 13, briefly press  
until the name and number display on the screen and the  
number is dialed.  
, then press and hold  
Using Voice Dial  
There are two types of voice dialing available:  
Name Dialing  
Digit Dialing  
22  
               
Name Dialing dials any number stored in your Contacts list by  
saying the name of the contact. Digit Dialing dials any valid  
telephone number, as well as numbers not stored to your  
Contacts list by speaking the digits of the number.  
5. Press Repeat to say the name again.  
– or –  
Press Settings, then press Exit to exit Voice Dial without  
dialing.  
Dialing by Name  
If the recognized name has multiple numbers stored for it  
(that is, Home, Work, Mobile, and so on), Voice Dial  
displays the possible choices and prompts you with  
Which number?”  
To dial a name, do the following:  
1. In standby mode, press and hold  
.
Say a Command” displays on the screen and is  
pronounced through the earpiece.  
6. Say one of the following number types:  
2. Say, “Call”.  
Home  
Work  
Mobile  
You are prompted to “Say the name or #”.  
3. Speak clearly and say the name of a person in your  
Voice Dial dials the specified number.  
Contacts list, first name followed by last name.  
Dialing by Number  
If the name is recognized, Voice Dial repeats the name and  
dials the number.  
To dial a number, do the following:  
If Voice Dial is not sure which name you said, it displays a  
choice list of up to three names and prompts you with “Did  
you say?” followed by the first name on the list.  
1. In standby mode, press and hold  
.
Say a Command” displays on the screen and is  
pronounced through the speaker.  
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
2. Say “Call”.  
You are prompted to “Say the name or #”.  
3. Speak clearly and say the telephone number of the person  
you want to call.  
Call Functions  
23  
If the number is recognized, Voice Dial repeats and dials  
the number. If Voice Dial is not sure it has recognized the  
number, it displays a choice list of up to three numbers and  
prompts you with “Did you say?” followed by the first  
number on the list.  
• Speaker On / Off: Enables/disables Speakerphone mode during  
this call.  
• Messages: The Messages menu displays on the screen.  
• Contacts: The Contacts Find screen displays on the screen.  
• Recent Calls: The All Calls Log screen displays on the screen.  
• Send DTMF: Send your phone number as DTMF tones.  
4. Say “Yes” to confirm the number or “No” to hear the next  
one, or use the keypad to select the correct number from  
• Voice Privacy: A safety feature to protect you from unauthorized  
use.  
• Location: Lets you change your phone’s Location setting.  
Press Repeat to say the name again.  
Press o exit Voice Dial without dialing.  
2. Press  
to exit the menu.  
t
Answering a Call  
Open the flip on your phone and press  
Ignoring a Call  
When you ignore an incoming call, the call is immediately  
forwarded to voice mail.  
.
Tip: You can set your phone to automatically answer calls  
or to answer calls when you press any key except the  
key or automatically, as indicated by the Auto Answer icon  
Press Ignore during an incoming call. The call forwards to  
voice mail.  
(
Adjusting the Call Volume  
In standby mode, press the Volume key (  
) down until the  
Call Volume Level dial displays on the screen.  
The In-Call Options Menu  
Calls Log  
You can access numerous menus and features during a call.  
1. Press Options during a call and select one of the following  
options:  
The Calls log displays information about Outgoing, Incoming, and  
Missed calls. You can also view times for your last call and the  
time totals for all calls.  
24  
             
Viewing the Calls Log  
1. In standby mode, press  
2. Highlight a call, then press  
OPEN to view the Name of  
the called party (if in the Contacts list), the number dialed,  
the time and date the call was placed, and the duration of  
the call (in minutes and seconds).  
Menu Calls. The following  
Calls logs and options display:  
• Outgoing Calls  
3. Press Options. A pop-up menu containing the following  
• Incoming Calls  
options displays on the screen:  
• Missed Calls  
Save: Save the number to your Contacts.  
• All Calls  
Details: Calls to Contacts Only — Displays the entry for the called  
Contact.  
• Call Timer  
• Data Counter  
Erase: Erase the selected call from your Outgoing call log.  
Lock/Unlock: Protect the selected call from being erased.  
Erase All: Erase all calls from your Outgoing call log.  
2. Select the Calls log to view or the function you want to use.  
Outgoing Calls  
View Timer: Displays the number of calls and/or the total time  
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming  
Calls, All Calls, Last Reset, or Lifetime Call.  
Your phone retains information about the last 90 outgoing calls  
and stores them in the Outgoing calls log. You can review the  
Outgoing calls log for the time and date of a call, as well as other  
information.  
4. Press Msgs to launch the Send Message menu. The  
following options display on the screen:  
Note: To quickly view your most recent calls, briefly press  
in standby  
Text Message: Lets you send a text message to the selected  
number called.  
mode.  
Picture Message: Lets you send a picture message to the  
selected number called.  
1. At the Calls menu, select Outgoing Calls. A list of your  
outgoing calls displays on the screen.  
5. Select the desired message type to compose a message.  
Call Functions  
25  
Your phone retains information about the last 90 Incoming calls  
and stores them in the Incoming call log. You can review the  
Incoming call log for the time and date of the call, as well as  
other information.  
Picture Message: Lets you send a picture message to the  
selected calling number.  
1. At the Calls menu, select Incoming Calls. A list of your  
5. Select an option to perform its function.  
Incoming calls displays on the screen.  
Missed Calls  
2. Highlight a call, then press  
OPEN to view the Name of  
Your phone retains information about the last 90 missed calls  
(calls that were never picked up) and stores them in the Missed  
call log. You can review the Missed call log for the time and date  
of the call, as well as other information.  
the caller (if in the Contacts list), the originating number,  
the time and date the call was received, and the duration  
of the call (in minutes and seconds).  
3. Press Options. A pop-up menu containing the following  
1. At the Calls menu, select Missed Calls. A list of your  
options displays on the screen:  
missed calls displays on the screen.  
Save: Save the number to your Contacts.  
2. Highlight a call, then press  
OPEN to view the Name of  
Details: Calls from Contacts Only — Displays the entry for the  
calling Contact.  
the caller (if in the Contacts list), the originating number,  
and the time and date the call was received.  
Erase: Erase the selected call from your Incoming calls log.  
Lock/Unlock: Protect the selected call from being erased.  
Erase All: Erase all calls from your Incoming calls log.  
3. Press Options. A pop-up menu containing the following  
options displays on the screen:  
Save: Save the number to your Contacts.  
View Timer: Displays the number of calls and/or the total time  
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming  
Calls, All Calls, Last Reset, or Lifetime Calls.  
Details: Calls from Contacts Only — Displays the entry for the  
calling Contact.  
Erase: Erase the selected call from your Missed call log.  
Lock/Unlock: Protect the selected call from being erased.  
Erase All: Erase all calls from your Missed call log.  
4. Press Msgs. The following options display on the screen:  
Text Message: Lets you send a text message to the selected  
calling number.  
26  
View Timer: Displays the number of calls and/or the total time  
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming  
Calls, All Calls, Last Reset, or Lifetime Calls.  
Details: Calls from Contacts Only — Displays the entry for the  
calling/called Contact.  
Erase: Erase the selected call from your Calls log.  
Lock/Unlock: Protect the selected call from being erased.  
Erase All: Erase all calls from your Calls log.  
4. Press Msgs. The following options display on the screen:  
Text Message: Lets you send a text message to the selected  
called number.  
View Timer: Displays the number of calls and/or the total time  
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming  
Calls, All Calls, Last Reset, or Lifetime Calls.  
Picture Message: Lets you send a picture message to the  
selected called number.  
4. Press Msgs. The following options display on the screen:  
Text Message: Lets you send a text message to the selected  
calling/called number.  
5. Select an option to perform its function.  
Picture Message: Lets you send a picture message to the  
All Calls  
selected calling/called number.  
You can review all of the calls log entries (outgoing, incoming,  
and missed calls) for the time and date of a call, as well as other  
information.  
5. Select an option to perform its function.  
1. At the Calls menu, select All Calls. A list of all logged calls  
displays on the screen.  
Call Timer  
2. Highlight a call, then press  
OPEN to view further  
View the duration of your last call, total calls, and calls made  
during the life cycle of you phone using the Call Timer feature.  
information about the call.  
3. Press Options. A pop-up menu containing the following  
Note: Call Timer is not for billing purposes.  
options displays on the screen:  
Save: Save the number to your Contacts.  
1. At the Calls menu, select Call Timer. The following timers  
display on the screen:  
Call Functions  
27  
Last Call: View the duration of your last call.  
Note: Data Counter is not for billing purposes.  
Outgoing Calls: View the duration of the total outgoing calls made  
on your phone, in your home zone, since the last erasure.  
1. At the Calls menu, select Data Counter. The following  
Incoming Calls: View the duration of the total incoming calls  
received on your phone, in your home zone, since the last erasure.  
options display on the screen:  
Transmit: View the total amount of data transmitted by your phone  
since the last reset.  
Received: View the total amount of data received by your phone  
since the last reset.  
Total: View the total amount of data sent or received by your phone  
since the last reset.  
Roaming Calls: View the total calls duration on your phone while  
roaming since the last erasure.  
All Calls: View the duration of the total call, incoming, outgoing,  
and data calls made on your phone since the last erasure.  
Last Reset: View the time and date all timers were last reset.  
Last Reset: View the time and date all timers were last reset.  
Lifetime Data Counter: View the total amount of data sent or  
received by your phone since activation (Lifetime Data Counter  
cannot be reset).  
Lifetime Calls: View the duration of all calls since your phone was  
activated.  
2. Press Reset to reset a selected counter (except Last Reset  
and Lifetime Calls), highlight the desired counter.  
2. Highlight the desired counter and press Reset to reset a  
selected counter (except Last Reset and Lifetime Data  
Counter).  
3. Press Reset All to reset all counters except Lifetime Calls.  
4. Press  
to exit the Call Timer list.  
3. Press Reset All to reset all counters except Lifetime Data  
Note: Although most call timers can be erased, the Lifetime call timer can  
Counter.  
never be erased.  
4. Press  
or  
to exit the Call Timer list.  
Data Counter  
Note: Although most data counters can be erased, the Lifetime Data Counter  
View the amount of Transmit data, Receive data, and Total data  
transmitted or received since the last time you reset the data  
counters, and the Lifetime amount of data transmitted or  
received.  
can never be erased.  
28  
Roaming  
What is Roaming?  
Roaming lets you use your R261 phone when you travel outside  
of your Wireless Carrier’s coverage area. The Roaming icon (  
)
displays in the top line of the screen when Roaming is active, and  
extra charges may apply when making or receiving calls.  
Note: Some features may be unavailable while roaming. Roaming also  
consumes additional power from the battery requiring more frequent  
recharging. Contact your Wireless Carrier for more information about  
Roaming.  
How Roaming Works  
Roam Option lets you set roaming preferences if you move in and  
out of your home network. The following roaming options are  
available:  
Home Only: Your phone is available for normal operation only in the  
designated coverage area.  
Automatic: Your Wireless Carrier’s Preferred Roaming List (PRL) of  
networks is used to acquire service. If no preferred networks are  
found, any digital system is acquired.  
Call Functions  
29  
   
Section 4: Entering Text  
This section outlines how to select the desired text entry mode  
when entering characters using the phone keypad. This section  
also describes how to use the T9 predictive text entry system to  
reduce the number of key strokes needed to enter text.  
Symbols: Using the phone keypad, enter a symbol into your message  
by pressing the number to the left of the symbol in the SYMBOLS pop-  
up window.  
Emoticons: Using the phone keypad, enter an emoticon into your  
message by pressing the number to the left of the emoticon in the  
EMOTICONS pop-up window.  
Changing the Text Entry Mode  
Text messages can be made up of alphabetical characters,  
numbers, and symbols. You can use the following text entry  
modes to simplify text entry:  
The current text entry mode (T9 Word Abc, ABC, 123, or Symbols)  
is indicated in the lower part of a text entry screen. To change the  
text entry mode while composing a text message:  
,
T9 Word: Press each phone key only once to enter the letter of the  
Repeatedly press and hold  
to toggle between Abc,  
word that you’re spelling. T9 WORD mode letter options are:  
123, and T9Word modes.  
T9 word: Enter all lower case letters  
T9 Word: Enter initial capital letters  
T9 WORD: Enter all upper case letters  
Or, do the following:  
1. Press the Left soft key.  
Abc: Enter letters by repeatedly pressing each phone key until the  
desired character (as shown on the key) displays on the screen. ABC  
mode letter options are:  
2. Highlight one of the following text entry modes:  
• T9Word  
• Abc  
abc: Enter all lower case letters  
Abc: Enter initial capital letters  
ABC: Enter all upper case letters  
• 123  
• Symbols  
• Emoticons  
123: Enter numbers by pressing the corresponding keys on the phone  
keypad.  
3. Press  
.
30  
     
®
Using T9 Mode  
Using Abc Mode  
1. While composing a text message, press the Left soft key,  
T9 Word recognizes commonly used words for the numeric  
sequence of key presses and inserts the word into your message.  
T9 Word is much faster than the traditional method of text entry  
(Abc) and requires only one key press per letter of the word that  
you’re spelling.  
then select Abc or ABC  
.
2. Enter characters while in Abc mode by pressing a key  
repeatedly until the desired character displays on the  
screen.  
1. While composing a text message, press the Left soft key,  
Example: Press  
once for “G” and twice for “H”.  
then select T9Word  
.
2. For practice, enter the word “Samsung” by pressing each  
3. Pause briefly and the displayed character is accepted and  
of the following keys only once:  
inserted into your message.  
4. Press  
to enter a space. Press  
to enter a period.  
Entering Numbers  
Enter numbers into a text message while in 123 mode.  
S
A
M
S
U
N
G
1. While composing a text message, press the Left soft key,  
T9 Word recognizes that the most commonly used word for  
the numeric sequence you just entered is “Samsung.”  
then select 123  
.
2. Enter numbers while in 123 mode by pressing the key  
labeled with the corresponding number that you wish to  
insert into your message.  
If more than one word shares the same numeric sequence,  
T9 Word pops-up the most commonly used. Press the  
Navigation key Up or Down to display other words, if  
available.  
Note: Press  
to enter a space. Press  
to enter a period. These key  
functions apply to both T9 Word and Abc modes. (For other symbols,  
Entering Text  
31  
           
Entering Symbols  
Example: Press  
for  
D.  
Enter symbols such as “@” or “%” into a text message.  
4. Repeat these steps to insert additional emoticon into your  
1. While composing a text message, press the Left soft key,  
then select Symbols. The first of three symbol screens  
displays on the screen.  
message.  
Adding Words to the T9 Dictionary  
1. While composing a text message, press the Left soft key,  
2. Use the Prev and Next soft keys to page through the other  
symbols, if desired.  
then select Add T9 Word  
.
3. Press the key that corresponds with the symbol that you  
2. Type the word to add to the dictionary and press  
.
wish to enter.  
The T9 word is added to the T9 dictionary.  
Example: Press  
for an exclamation point (!).  
4. Repeat these steps to insert additional symbols into your  
message.  
Entering Emoticons  
Enter symbols such as “:)” or “;-)” into a text message.  
1. While composing a text message, press the Left soft key,  
then select Emoticons. The first of two emoticon screens  
displays on the screen.  
2. Use the Prev and Next soft keys to page through the other  
emoticons, if desired.  
3. Press the key that corresponds with the emoticon that you  
wish to enter.  
32  
         
Section 5: Understanding Contacts  
This section details how you can manage your daily contacts by  
storing their names and numbers in your Contacts list. You can  
have your Contacts entries sorted by name.  
Open Contacts  
1. In standby mode, press Contacts  
.
Tip: To launch the Contacts menu using a voice command — In standby  
Contacts  
mode, press and hold  
until the phone prompts, “Say a command.”  
Say “Go to Contacts” into the microphone.  
Up to 1000 entries can be stored in Contacts. Each entry can  
have up to three associated phone numbers and one Email  
address. Each phone number can be up to 32 digits in length,  
page 21.) Associated names can be up to 32 characters in  
length. You can assign the Speed Dial numbers of your choice for  
each entry. You can also mark your Contacts list as Restricted to  
prevent unauthorized viewing. (For more information, refer to  
2. Select one of the following:  
• Go To: Locates and displays a list of name(s) or number(s) that  
match the entered characters or digits.  
• Edit: Edits the selected contact information.  
• View: Displays the selected contact information.  
• Options: Displays a list of configurable contact options.  
Tip: You can also access the Find option from standby mode, by pressing  
Tip: Speed Dial One-Touch Dialing Two-Touch Dialing, and Three-Touch  
,
Contacts or press and hold  
until the phone prompts, “Say a  
Dialing allow you to call numbers stored in Contacts faster. (For more  
command.” Say “Lookup” followed by a Contact name into the  
microphone.  
Understanding Contacts  
33  
     
New Contact: Add a new entry to Contacts.  
Finding a Contacts Entry  
Shortcut Key Method  
Erase: Erase the name and associated information.  
Send Txt Msg: Create and send a text message to the selected  
Contact.  
If you’ve stored a name entry in Contacts, Find allows you to find  
it quickly by entering the first few letters of a Contact’s name.  
Send Pic Msg: Create and send a picture message to the selected  
Contact.  
1. In standby mode, press Contacts  
.
Call: Dial the number associated with the name.  
The Find screen displays on the screen with a grayed Go To  
field displayed, followed by the first few names in your  
Contacts list.  
Send Name Card Via Bluetooth: Send selected Contacts to another  
Bluetooth device.  
Voice Method  
Tip: You can also locate a contacts entry by pressing and holding  
until  
the phone prompts, “Say a command” then say “Lookup” followed by  
Use the Voice SVC Lookup command to view contact information  
for any named contact stored in your Contacts list by saying the  
name.  
a Contact name.  
2. Enter the first few characters of a name as entered in  
Contacts. For example, if you saved the name as “Amy  
Smith”, begin the search by pressing (for “A”).  
Note: The Lookup command displays the requested contact information in  
the display but does not dial any phone numbers for the contact.  
As you enter letters, the names of the closest matches  
display on the screen.  
To look up information for a specific contact:  
1. In standby mode, press and hold  
Say a Command” displays on the screen and is  
pronounced through the speaker.  
to launch Voice SVC.  
3. When the desired entry displays, highlight the entry.  
Press  
Press Edit to add or change information for this entry.  
Press View to show information about the entry.  
to dial the number associated with the name.  
2. Say “Lookup”, and when prompted, speak clearly and say  
the full name of the person you want to look up, exactly as  
it is entered in your Contacts list.  
Press Options and select the desired option to access its sub-menu  
on the screen:  
34  
       
Send Txt Msg: Create and send a text message to the selected  
Contact.  
If Voice SVC recognizes the name you said, the Contact entry  
information for that name displays on the screen.  
Send Pic Msg: Create and send a picture message to the selected  
Contact.  
If Voice SVC does not recognize the name you said, a choice list of  
up to three names displays on the screen, and Voice SVC prompts  
you with “Did you say?” followed by the first name on the list.  
Call: Dial the number associated with the Contact name.  
Send Name Card Via Bluetooth: Send the select Contact’s  
information to another Bluetooth device.  
3. Say “Yes” to confirm the name or “No” to hear the next  
name.  
Select the desired option.  
– or –  
Quick Search Method  
Use the keypad to select the correct name from the list.  
For information on enabling Quick  
– or –  
Press Repeat to say the name again.  
1. In standby mode and with  
Quick Search enabled, press  
the first few numeric keys that  
correspond to the letters of the  
Contact’s name.  
– or –  
Press Settings and press Exit to exit Voice SVC without  
dialing.  
The contact information for the name you selected displays  
on the screen.  
Example: To search for “Sally” you would enter 725  
.
2. Press the Up navigation key. A list of Contact names that  
begin with letters corresponding to the number keys you  
pressed displays on the screen.  
Press  
Press Erase to remove this entry from your Contacts list.  
Press Edit to add or change information for this entry.  
Press Options to access the following options.  
to dial the number associated with the name.  
Understanding Contacts  
35  
3. Highlight the searched for Contact.  
Menu Method  
Press  
Press  
to call the Contact.  
1. In standby mode, press  
Menu Contacts  
Add New  
Entry  
.
to view the Contact information.  
The New Contact screen displays on the screen with the  
Name field highlighted.  
Adding a New Contacts Entry  
You can use either of two methods to add an entirely new entry to  
Contacts.  
2. Enter the name of the new entry using the keypad. (For  
Dial Method  
3. Select the number type that matches your new entry  
1. Using the keypad, enter the number you wish to add to  
(Mobile, Home, Work, Pager, @Email, Group, Ringtone, or Fax).  
your Contacts.  
4. Enter a phone number or Email address in the highlighted  
2. Press Save. The following options display on the screen:  
field.  
• Create New: Creates a new Contacts entry.  
5. Repeat steps 3 and 4 as needed.  
• Update Existing: Adds the number you entered to an existing  
Contacts entry.  
6. Press  
to save the new entry.  
Editing a Contacts Entry  
Editing Contacts Name and Numbers  
1. In standby mode, press Contacts and locate the Contacts  
3. Select Create New  
4. Select the number type that matches your new entry  
Mobile, Home, Work, Pager, or Fax). The New Contact screen  
.
(
displays on the screen.  
5. Enter a name to associate with the Contacts entry.  
6. Press  
Save to save the entry.  
2. Press  
View to view the contact details. The View  
Contact screen displays on the screen showing the  
highlighted entry’s information.  
36  
             
Add Pauses to Contacts Numbers  
3. Use the Navigation key to review the information for the  
entry that you wish to change, then press  
Edit Contact screen displays on the screen.  
Edit. The  
Calls to automated systems such as banking services often  
require a password or account number. Instead of manually  
entering these numbers, you can store them in a Contacts entry  
with the phone number and with special characters called  
pauses, up to a maximum of 32 digits.  
4. Highlight the particular information you want to add or  
change.  
Press  
to backspace and delete numbers or letters.  
Wait: Stops the calling sequence until the phone receives further input.  
2-Sec Pause: Stops the calling sequence for two seconds, then sends  
the remaining digits.  
Press and hold  
highlighted field.  
to clear all numbers or letters in the  
Press Options and select one of the following:  
Set Speed Dial Remove speed dial: Assign/remove a speed dial  
/
Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.  
For example, two consecutive 2-Sec Pauses cause a total pause time  
of four seconds. Keep in mind that pauses count as digits towards the  
32-digit maximum.  
Set as default: Set the number the phone will dial when Contacts  
dialing or speed dialing.  
Wait: A hard pause (waits for input from you).  
To add pauses to a Contacts entry number, do the following:  
2-Sec Pause: A 2-second pause after which dialing resumes. (For  
more information, refer to “Add Pauses to Contacts Numbers”  
on page 37.)  
1. In standby mode, press Contacts and locate the Contacts  
entry associated with the number in which to include one  
5. Press  
to save your changes.  
– or –  
2. Select and edit the desired number. (For more information,  
Press  
to discard your changes and press No at the  
prompt.  
Understanding Contacts  
37  
   
3. Press Options and select the pause option to add to the  
number sequence.  
4. Use the keypad to edit the Email address. (For more  
• Wait: A hard pause (waits for input from you).  
5. Press  
to save your changes.  
• 2-Sec Pause: A 2-second pause after which dialing resumes.  
Assigning a Ringtone to a Contacts Entry  
4. Press  
to store the number to Contacts.  
When you assign a ringtone to a Contacts entry, the phone plays  
the ringtone that you assigned to the entry when you receive a  
call from that Contact instead of the ringtone currently assigned  
to Voice Calls.  
Pause Dial from Contacts  
1. If you stored the number using 2-second pause(s), simply  
find the Contacts entry, highlight the number, and press  
1. In standby mode, press Contacts, locate the Contacts entry,  
then press  
View to view the contact details. (For more  
2. If you stored the number using Wait(s), find and dial the  
number from Contacts and wait for the appropriate prompt  
from the dialed number.  
The Edit Contact screen displays on the screen.  
3. Press  
to resume dialing the number.  
2. Highlight the Ringtone field, then press  
Edit. The Edit  
Contact menu displays on the screen.  
Edit an Existing Email Address  
3. Press Set, select the ringtone or sound you want to assign  
1. In standby mode, press Contacts and locate the Contacts  
to the Contacts entry, then press OK  
.
The Edit Contact screen re-displays on the screen with the  
name of the selected file in the Ringtone field.  
2. Highlight the desired Contacts entry, then press  
View  
to view the contact details.  
4. Press  
to save the ringer assignment to the selected  
Contacts entry.  
3. Highlight the Email field.  
38  
   
3. Press Yes to confirm erasure of the selected Contact.  
Saving a Number After a Call  
Once you finish a call, you can store the caller’s number to your  
Contacts list.  
– or –  
Press No to retain the Contact.  
Speed Dial  
Note: If the call was incoming and Caller ID information was unavailable,  
then the Save option is also unavailable.  
A Contacts entry’s Speed Dial number corresponds to the number  
keys you press to speed dial one of that entry’s numbers.  
1. Press  
to end your call. The call time, length of call,  
Example:  
phone number, and name of the party (if available) display  
on the screen.  
To speed dial the Contacts entry assigned to Speed Dial 5, press and  
hold , (1-touch dialing).  
To speed dial the Contacts entry assigned to Speed Dial 35, press  
then press and hold , (2-touch dialing).  
To speed dial the Contacts entry assigned to Speed Dial 235, press  
, press , then press and hold , (3-touch dialing).  
2. Press Save. The Save menu displays on the screen  
showing the following options:  
• Create New: Lets you create a new Contacts entry.  
• Update Existing: Lets you add the number you entered to an  
existing Contacts entry.  
3. Follow the instructions in the upcoming sections  
depending on whether the number is a new entry or you  
wish to add it to an existing entry.  
You can assign one or more Speed Dial numbers to a Contacts  
entry during new entry creation or by editing an existing entry.  
Assignment During Entry Creation  
Deleting a Contacts Entry  
To assign a Speed Call number to a new Contacts entry number,  
do the following:  
1. In standby mode, press Contacts  
.
2. Locate the Contacts entry to delete, then press Options  
1. Follow either of the New Contacts entry procedures until  
you enter a name for the entry (see “Adding a New  
Entry” on page 34.) The phone prompts to confirm the  
erasure.  
Understanding Contacts  
39  
         
2. After entering the Contacts entry name, do not press  
.
Note: Press No to discard the assignment and return to the Speed Dial  
Instead, highlight a number field.  
screen.  
3. Press Options. The following options display on the screen:  
8. Press  
to save your changes.  
• Set Speed Dial: Assign a speed dial number.  
Assignment to an Existing Entry  
1. In standby mode, press Contacts, locate the Contacts entry,  
• Set as default: Set the number the phone will dial when Contacts  
dialing, speed dialing, or voice dialing.  
• Wait: A hard pause (waits for input from you).  
then press  
View to view the contact details.  
• 2-Sec Pause: A 2-second pause after which dialing resumes. (For  
more information, refer to “Add Pauses to Contacts  
Numbers” on page 37.)  
2. Locate the Contacts entry to assign, then press Edit. (For  
4. Select Set Speed Dial. The Speed Dial screen displays on  
the screen.  
3. Highlight the number field you wish to assign a Speed Dial  
number.  
5. Select an Unassigned Speed Dial number or enter an  
Unassigned Speed Dial number in the Go To field using the  
keypad.  
4. Press Options. The following options display on the screen:  
• Set Speed Dial: Assign a speed dial number.  
• Set as default: Set the number the phone will dial when Contacts  
Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.  
These numbers are already assigned to Voicemail (001), to  
Information (411), to Customer Care (611), and to emergency use  
(911).  
dialing, speed dialing, or voice dialing.  
• Wait: A hard pause (waits for input from you).  
• 2-Sec Pause: A 2-second pause after which dialing resumes. (For  
more information, refer to “Add Pauses to Contacts  
Numbers” on page 37.)  
6. Press  
Set. You are prompted to confirm your Speed  
Dial number assignment.  
5. Select Set Speed Dial. The Speed Dial screen displays on  
7. Press Yes to save your Speed Dial assignment and return  
to the New Contact screen.  
the screen.  
40  
6. Select an Unassigned Speed Dial number or enter an  
Unassigned Speed Dial number in the Go To field using the  
keypad.  
• Wait: A hard pause (waits for input from you).  
• 2-Sec Pause: A 2-second pause after which dialing resumes. (For  
more information, refer to “Add Pauses to Contacts  
Numbers” on page 37.)  
Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.  
These numbers are already assigned to Voicemail (001), to  
Information (411), to Customer Care (611), and to emergency use  
(911).  
4. Select Remove speed dial. “Remove speed dial?” pops up in  
the display to confirm your desire to remove the entry.  
5. Press Yes to remove the Speed Dial assignment. “Speed  
Dial Removed” displays, and you are returned to the Edit  
Contact screen.  
7. Press  
Set. You are prompted to confirm your Speed  
Dial number assignment.  
6. Perform steps 4 through 7 of “Assignment During Entry  
8. Press Yes to save your Speed Dial assignment and return  
Creation” on page 39.  
to the New Contact screen.  
Contacts Groups  
Changing a Speed Dial Location  
Contact Groups let you easily send messages to multiple,  
selected Contacts. You can also use Groups to find Contact  
entries and to add/remove Contacts names in a Group or to  
create or rename a Group.  
1. In standby mode, press Contacts, locate the Contacts entry,  
then press  
View to view the contact details. (For more  
page 34.) The Edit Contact screen displays on the screen.  
Add Contacts Entry to a Group  
Using Add New/Edit Contact Option  
2. Highlight the number field marked by the Speed Dial  
icon ( ) and press  
Edit.  
To add a Contact to a Group using either the Add New Contact  
option or the Edit Contact option, do the following:  
3. Press Options. The following options display on the screen:  
• Remove speed dial: Unassign the current speed dial number.  
1. Create a Contacts entry or find a Contacts entry that you  
• Set as default: Set the number the phone will dial when Contacts  
dialing, speed dialing, or voice dialing.  
want to add to a Group.  
2. View the Contacts entry.  
Understanding Contacts  
41  
       
3. Highlight the Group field, then press Edit  
Set  
.
• Family  
• Friends  
The Select Group screen displays on the screen showing  
Groups similar to the following:  
• No Groups  
2. Highlight a Group, then press Options. The following  
options popup in the display:  
• Send Txt Msg: Send a text message to the selected Group.  
• Business  
• Send Pic Msg: Send a picture message to the selected Group.  
• Colleague  
• Rename: Change the name of the selected Group.  
• Family  
• Erase: Delete the selected Group, and send the Contacts back to  
• Friends  
No Group.  
4. Select the Group to which you want to assign the selected  
• Add: Add one or more Contacts to the selected Group.  
Contact and press  
You are returned to the New Contact  
and the selected Group name populates the Group field.  
5. Press Save to save your changes.  
.
3. Select Add. The Add Contacts screen displays on the  
/
Edit Contact screen  
screen showing a list of Contacts entries.  
4. Do one of the following:  
Use the Navigation key to highlight an entry you want to add to the  
Using Group Add Option  
group, then press  
check box.  
Mark. A check mark displays in the entry’s  
The Add option lets you add one or more existing Contacts to a  
Group.  
Repeat as needed to check all the desired Contacts.  
1. In standby mode, press  
Menu  
Contacts  
Group.  
Press Options, then select Mark All  
.
The Group List screen displays on the screen showing  
Groups similar to the following:  
• No Groups  
Note: Highlight the Contact and press  
Mark to clear the check mark.  
• Business  
• Colleague  
42  
5. Press Done when you have marked the Contacts you want  
to add to the group. “Contact added to group” displays on  
the screen, followed by the selected Group list including  
the added Contacts.  
The Group List screen displays on the screen.  
2. Highlight the Group name other than No Group that you  
wish to change, then press Options  
Rename.  
The Rename Group screen displays on the screen.  
Remove Contacts Entry from a Group  
3. Enter changes to the group name using the keypad. (For  
1. In standby mode, press  
The Group List screen displays on the screen.  
2. Highlight the Group (other than No Group) from which you  
want to remove a Contact, then press View  
Menu Contacts  
Group.  
4. Press  
Save when you complete renaming.  
The group name is renamed to the new name.  
.
Erase a Group  
A list of the Contacts assigned to the selected Group  
displays on the screen.  
The Erase option lets you delete a Group, freeing you to reassign  
the Contacts formerly in the Group.  
3. Highlight the Contact you wish to remove.  
1. In standby mode, press  
The Group List screen displays on the screen.  
2. Highlight the Group that you wish to delete, press Options  
Erase  
Menu Contacts  
Group.  
4. Press Remove. You are prompted to confirm the removal of  
the selected Contact.  
5. Press Yes to remove the selected Contact from this Group  
.
and return it to No Group.  
– or –  
You are prompted to confirm the Group erasure.  
3. Press Yes to confirm erasure of the Group.  
Press No to keep the selected Contact in this Group.  
– or –  
Rename a Group  
Press No to retain the Group.  
The Rename option lets you change the name any of the Groups,  
except No Group.  
1. In standby mode, press  
Menu Contacts  
Group.  
Understanding Contacts  
43  
   
Memory Info  
The Memory Info menu option lets you view the amount of  
memory you have used to store Contacts entries, as well as the  
memory remaining to store more Contacts entries.  
In standby mode, press  
Info  
Menu Contacts  
Memory  
.
The Memory Info Contacts screen displays on the screen  
showing the Total amount of memory in your phone, the  
amount of memory Used to store Contacts entries, and the  
remaining (Free) for Contacts entries.  
44  
   
Section 6: Messages  
This section explains how to send or receive different types of  
messages. This section also describes the features and  
functionality associated with messaging.  
2. Enter the phone number or Email address of the recipient  
and press  
– or –  
.
Types of Messages  
Your phone is able to send and receive Text messages to  
compatible phones and devices. Text messages can be up to 160  
characters in length.  
3. Press Add and select a Contact entry, a Contacts Group, or  
the originator of Recent Calls, then press  
field displays on the screen.  
. The Text:  
4. Enter the text content of your message using the keypad.  
Note: Available memory is shared between all messages. You can store up to  
100 messages. However, the exact number is dependent upon  
message length.  
5. Press Options to complete the message text and set  
message send options.  
Create and Send Text Messages  
6. Select one of the following options:  
Menu Method  
1. In standby mode, press Messages  
• Edit Send To: Displays the Create Txt Msg screen and allows you to  
enter another recipient phone number or email address.  
Send Message  
Text  
• Add Quick Text: Inserts a preformatted string of text in the body of  
the message.  
Message. The Create Txt Msg screen displays.  
Tip: To launch the Create Txt Msg screen using a voice command — In  
standby mode, press and hold  
• Save As Draft: Save the message to your Draft folder.  
until the phone prompts, “Say a  
command.” Say “Send Text” into the microphone. You are then prompted  
to say a Contact name or a number for the first recipient of the  
message.  
• Priority Level: Choose High or Normal.  
• Validity Period: Allows you to set the length of time your text  
messages are stored at the message center while attempts are  
made to deliver them.  
Messages  
45  
           
• Deferred Delivery: Sets a delay time before the phone sends a  
4. Enter the text content of your message using the keypad.  
message.  
• Delivery Ack: Choose On or Off — Requests confirmation when  
your message is received.  
5. Press Options to complete the message text and set  
message send options. The following options display on  
the screen:  
• Add To Contacts: Save the recipient’s number or Email address as  
a Contacts list entry.  
• Cancel Message: End composition of this message. You are  
prompted to choose whether to save this message to your Drafts  
folder.  
• Edit Send To: Allows you to edit the Send To field.  
• Add Quick Text: Insert pre-composed text in your message.  
• Save As Draft: Save the message to your Draft folder.  
7. Press  
Send when finished entering your message.  
Priority Level: Choose High, or Normal.  
Chat Method  
Validity Period: Enter the Date when this message will cease to be  
valid, then use the Left and Right navigation keys to choose the  
Using the chat method, you can quickly and easily send a new  
message to a Contact or number with whom you’ve already  
exchanged messages.  
Time  
.
• Deferred Delivery: Sets a delay time before the phone sends a  
message.  
1. In standby mode, press Messages  
stored incoming messages displays.  
2. Select a message from the person you wish to contact and  
press Open. The Chat with... screen displays on the  
Inbox. A list of your  
• Delivery Ack: Choose On or Off — Requests confirmation when  
your message is received.  
• Add To Contacts: Save the recipient’s number or Email address as  
a Contacts list entry.  
screen, showing the text of your previous message  
• Cancel Message: Cancels the message you were composing.  
6. Press  
Send when finished entering your message.  
3. Press Reply, then select Text Message. The Reply – Txt Msg  
screen displays on the screen.  
46  
View a Text Message Now  
Receive Text Messages  
1. After you select the View Now option, the new text  
message displays on the screen in Chat View. (For more  
When you receive a message in standby mode, the ringer sounds  
(unless turned off) and New Message displays on the screen  
along with the closed envelope icon (  
).  
2. Press Options while viewing your message. The following  
options display on the screen:  
Select one of the following, displayed options.  
View Now: Opens the message, where you have the option to  
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,  
Message Info, or Extract.  
• View Last Message: Displays the last message from this recipient.  
• Forward: Send a copy of this message to another recipient.  
• Reply With Copy: Compose and send a reply message to the  
originator of the received message and include a copy of the  
original message.  
View Later: Saves the message to your Inbox, where you can view it  
later, then returns your phone to standby mode.  
Receive Messages During a Call  
• Save Quick Text: Save the text in this message as a new  
precomposed message text.  
When you receive a message while in a call, New Message  
displays on the screen along with the closed envelope icon  
• Lock / Unlock: Block/permit erasure of the highlighted message.  
(
). The date and time of the message also display on the  
• Add To Contacts: Save the sender’s number to your Contacts.  
screen along with the following options:  
• Message Info: Displays message delivery status, addressee, size,  
and so on.  
View Now: Opens the message, where you have the option to  
Forward, Reply With Copy, Save as Preset, Lock, Add To Contacts,  
Message Info, or Extract.  
• Extract: Lets you call the originator of the highlighted message.  
• Add To Contacts: Save the sender’s number to your Contacts.  
3. Select an option to perform its function.  
View Later: Saves the message to your Inbox, where you can view it  
later, and returns your phone to call mode.  
Note: For more information on received message options, see “Inbox” on  
page 53.  
Messages  
47  
   
View a Text Message Later  
Send Picture Messages in Camera Mode  
1. In standby mode, press Messages  
Inbox. The Inbox  
Picture messages can be sent to recipients with compatible  
phones or devices. You can even accompany a Picture message  
with a voice memo or preloaded sound.  
screen displays on the screen.  
2. Select the new message. The new text message displays  
on the screen in Chat View. (For more information, refer to  
Tip: You can send a Picture message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate Send to field of the  
Picture message composer.  
Chat View  
Chat View mode is the default format for viewing text messages.  
In Chat View mode, you can view a series of text messages  
exchanged between your phone and another phone as if the  
messages were a chat session, instead of viewing only the  
incoming messages individually.  
1. In standby mode, press and hold the Camera key (  
).  
The camera viewfinder screen displays on the screen.  
2. Using the display as a viewfinder, when the image that you  
wish to send displays on the screen, press  
take a picture.  
Take to  
Note: To disable/enable Chat View mode, change the Message View setting.  
Note: For more information about using the camera feature in your phone,  
3. Press  
Send to save the picture and begin the picture  
Tip: To simplify the exchange of messages with Message View setting to  
message delivery process. The Create Pic Msg screen  
displays with the Send To list highlighted.  
Chat, you might want to change the Auto Save setting to On  
.
The following icons indicate which responses are incoming and  
outgoing:  
4. Enter the phone number or Email address of the recipient  
of the Picture message, then press  
.
Incoming Message  
Outgoing Message  
Tip: Press Add to display a pop-up menu containing: Contacts Groups, and  
,
Recent Calls. These options allow you to find and add recipients to the  
Send To: list.  
48  
       
5. Enter a subject for the Picture message using the keypad.  
10. Press Options to complete the message text and set  
message send options. The following options display on  
the screen:  
• Preview: View the picture as the recipient will see it.  
6. Press the Navigation key Down then enter the message  
text in the Text field using the keypad. (For more  
Your new picture displays in the Picture field.  
• Add Quick Text: Add precomposed text to your message.  
• Save As Draft: Save the message to your Draft folder.  
• Priority Level: Choose High Normal, or Low.  
,
7. Highlight the Sound field if you wish to insert a sound into  
your Picture message, and do the following; otherwise,  
proceed to step 11.  
• Validity Period: Enter the Date when this message will cease to be  
valid, then use the Left and Right navigation keys to choose the  
Time  
.
8. Press Sound. and select one of the following options:  
• Deferred Delivery: Sets a delay time before the phone sends a  
message.  
• Record New: Record a new memo to insert into the message.  
• Delivery Ack: Choose On or Off — Requests confirmation when  
Note: You can record and insert a voice memo of up to 60 seconds in length,  
if you record first before attaching a picture. If a picture is attached  
before recording, the size of the voice memo is limited to the amount  
of remaining memory.  
your message is received.  
• Cancel Message: Cancels composing this message and closes the  
screen.  
• Remove Pic: Remove the picture from your message.  
• Audio files list: Select from the list of previously recorded voice  
memos and preloaded audio files on your phone.  
Remove Sound: Removes the sound file from your message.  
• Add Slide/Erase Slide: Inserts a blank page or erases the inserted  
9. Select an option, a sound file, and insert the sound into  
slide in this message.  
your message.  
– or –  
• Add To Contacts: Adds the number entered to the Contacts list.  
11. Press  
to send the message. “Sending Message”  
Press  
to exit the pop-up menu without inserting a  
displays on the screen and a progress bar indicates the  
send status.  
sound.  
Messages  
49  
3. The Subject field displays on the screen. Enter a subject for  
the Picture message using the keypad. (For more  
Send Picture Messages in Standby Mode  
Send Picture messages to recipients with a compatible phone or  
other device, and accompany the Picture message with a voice  
memo, ring tone, or downloaded melody.  
4. Press the Navigation key Down until the Text field is  
highlighted, then enter the message text using the keypad.  
Tip: You can send a Picture message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate Send To field of the  
Picture message composer.  
5. Press the Down navigation key until the Picture field is  
highlighted, then press Picture. A photo gallery of  
thumbnail images displays on the screen.  
1. In standby mode, press Messages  
Picture Message  
Send Message  
.
6. Highlight a picture to add to the message.  
The Create Pic Msg screen displays on the screen showing  
the Send To list.  
7. Press View to expand the highlighted picture to full-screen  
size.  
Tip: To launch the Create Pic Msg screen using a voice command — In  
standby mode, press and hold  
until the phone prompts, “Say a  
8. Press Camera if you want to include a new picture.  
command.” Say “Send Picture” into the microphone. You are then  
prompted to say a Contact name or a number for the first recipient of the  
message.  
Note: For more information about using the camera feature in your phone,  
2. Enter the phone number or Email address of the recipient  
9. Press  
to add the highlighted picture to your message.  
using the keypad, then press  
.
You are returned to the Create Pic Msg screen with the  
selected picture in the Picture field.  
Tip: Press Add to display a pop-up menu containing: Contacts Groups, and  
,
Recent Calls. These options allow you to find and add recipients to the  
Send To list.  
50  
   
10. If you wish to insert a sound into your Picture message,  
use the Down navigation key to highlight the Sound: field  
press Sound; otherwise, proceed to step 12.  
• Validity Period: Enter the Date when this message will cease to be  
valid, then use the Left and Right navigation keys to choose the  
Time  
.
• Delivery Ack: Choose On or Off — Requests confirmation when  
your message is received.  
The My Ringtones screen displays on the screen showing  
the following options:  
• Cancel Message: Cancels composing this message and closes the  
screen.  
• Record New: Record a new memo to insert into the message.  
• Add Slide/Erase Slide: Inserts a blank page or erases the inserted  
Note: You can record and insert a voice memo of up to 60 seconds in length,  
if you record first before attaching a picture. If a picture is attached  
before recording, the size of the voice memo is limited to the amount  
of remaining memory.  
slide in this message.  
• Remove Pic: Remove the picture from your message.  
• Remove Sound: Remove the sound file from your message.  
• Add To Contacts: Save the recipient’s number or Email address as  
a Contacts list entry.  
• Audio files list: Select from the list of previously recorded voice  
memos and preloaded audio files on your phone.  
14. Press  
to send the message. “Sending Message”  
11. Select an option and a sound file, and insert the sound into  
displays on the screen and a progress bar indicates the  
send status.  
your message.  
12. Press  
to exit the pop-up menu without inserting a  
Receive Picture Messages  
When you receive a Picture Message in standby mode, the ringer  
sound.  
13. Press Options to complete the message text and set  
message send options. Select one of the following:  
• Preview: View the picture as the recipient will see it.  
sounds (unless turned off) and New Pic Message displays on the  
screen along with the closed envelope icon (  
).  
The date and time of the message also display on the screen.  
• Add Quick Text: Add precomposed text to your message.  
• Save As Draft: Save the message to your Draft folder.  
Priority Level: Choose High  
,
Normal, or Low  
.
Messages  
51  
     
Select one of the following options:  
View a Picture Message Now  
1. After you select the View Now option, “Connecting  
• View Now: Retrieves and opens the message, where you have the  
option to Erase, Reply, Forward, Save Pic, Save Sound, Save Quick  
Text, Lock or Add to Contexts.  
displays on the screen followed by “Receiving Message  
and a progress bar indicating that the message is  
downloading to your phone.  
• View Later: Saves the message to your inbox, where you can view  
it later, then returns your phone to standby mode.  
2. After the Picture message has downloaded, an alert  
• Reject: Rejects the picture message.  
sounds, and the new Picture message displays on the  
View a Picture Message Later  
1. In standby mode, press Messages  
screen. If the message includes a sound file, the phone  
begins playing it.  
Inbox. The Inbox  
3. Press Options while viewing your message. The following  
displays on the screen.  
options display on the screen:  
2. If the new picture message is not highlighted, select the  
new message. “Connecting” displays on the screen  
followed by “Receiving Message” and a progress bar  
indicating that the message is downloading to your phone.  
• Play Again: Play the sound file included in the picture message  
again.  
• Forward: Send a copy of this message to another recipient.  
• Save Pic: Save the picture included in this message to the My  
3. Once a Picture message has been downloaded to your  
phone, the new Picture message displays on the screen. If  
the message includes a sound file, the phone begins  
playing it.  
Images folder.  
• Save Sound: Save the sound file included in this message to the  
My Sounds folder.  
• Save Quick Text: Save the text in this message as a new pre-  
composed message text.  
Note: For more information on viewing and managing received picture  
messages, see “Inbox” on page 53.  
• Lock Unlock: Block/permit erasure of the highlighted message.  
/
• Add To Contacts: Save the sender’s number to your Contacts.  
• Message Info: Displays message delivery status, addressee, size,  
and so on.  
52  
 
• Extract: Calls the sender of the received message.  
• Chat view:  
View Last Message: Displays the most recent message exchanged  
with this sender/addressee in Normal mode.  
4. Select an option to invoke its function.  
Note: For more information on received picture message options, see  
Add To Contacts: Save the sender’s number to your Contacts.  
“Inbox” on page 53.  
• Normal view:  
Message Boxes  
Your phone stores messages in any one of five message boxes.  
The subsections that follow describe each message box in detail.  
Forward: Send a copy of this message to another recipient.  
Reply With Copy: (Text Msg only) Compose and send a reply message  
to the originator of the received message and include a copy of the  
original message.  
Inbox  
Save Quick Text: Save the text in this message as a new pre-  
composed message text.  
Received messages of all types (except Voicemail) are stored in  
the Inbox.  
Lock Unlock: Block/permit erasure of the highlighted message.  
/
Add To Contacts: Save the sender’s number to your Contacts.  
1. In standby mode, press Messages  
Inbox. A list of  
Message Info: Displays message delivery status, addressee, size, and  
so on.  
incoming messages displays on the screen.  
Tip: While in a call, press Options, then select Messages to open the  
Extract: Calls the sender of the received message.  
Messages menu.  
Managing Inbox Messages  
1. In standby mode, press Messages  
Inbox. A list of  
2. Select the message that you wish to view. The contents of  
incoming messages displays on the screen.  
the highlighted message display on the screen.  
2. Highlight a message in the list.  
3. While viewing your message press Options and select on of  
the following options:  
3. Press Erase to remove the highlighted message from the  
Inbox.  
Messages  
53  
   
4. Press Options and select one of the following:  
3. While viewing your message, press Options and select one  
of the following:  
• Reply: Compose and send a reply message to the originator of the  
received message.  
• Play Again: (Picture message only) Repeats playback of a sound  
file attached to this message.  
• Reply With Copy: Compose and send a reply message to the  
originator of the received message and include a copy of the  
original message.  
• Forward: Send the highlighted message to another recipient.  
• Erase: (Picture message only) Remove this message from the  
Outbox folder.  
• Forward: Send a copy of this message to another recipient.  
• Lock Unlock: Block/permit erasure of the highlighted message.  
/
• Lock Unlock: Block/permit erasure of the highlighted message.  
/
• Add To Contacts: Save the sender’s number to your Contacts.  
• Save Quick Text: Save the text in this message as a new pre-  
composed message text.  
• Erase Inbox: Delete all unlocked messages from the Inbox.  
• Add To Contacts: Save the recipient’s number to your Contacts.  
• Message Info: Displays message delivery status, addressee, size,  
and so on.  
• Message Info: Displays message delivery status, addressee, size,  
and so on.  
Outbox  
• Extract: Calls recipient of this message.  
Your phone stores messages in the Outbox, regardless of  
whether the message was successfully transmitted. Verify if and  
when a message or Email was successfully received by enabling  
the Delivery Ack feature.  
Messages and Lock Mode  
Your phone can still receive messages while in Lock Mode. The  
time and date of the message display on the screen, but you  
cannot access the message until you enter the lock code.  
Review Messages in the Outbox  
Managing Outbox Messages  
1. In standby mode, press Messages  
sent messages display on the screen.  
2. Highlight a message that you wish to review, then press  
Open  
Outbox. Your list of  
1. In standby mode, press Messages  
Outbox. Your list of  
sent messages display on the screen.  
.
2. Highlight a message, then press Erase to remove the  
highlighted message from the Outbox.  
54  
View and Edit Draft Messages  
3. Press Options and select one of the following:  
• Forward: Send the highlighted message to another recipient.  
• Resend: Re-send the highlighted message to the original recipient.  
1. In standby mode, press Messages  
Drafts. A list of any  
draft messages that you’ve saved displays on the screen.  
• Lock  
/
Unlock: Block/permit erasure of the highlighted message.  
2. Highlight a message that you wish to view or edit, then  
press  
the screen.  
Edit. The message creation screen displays on  
• Add To Contacts: Save the recipient’s number to your Contacts.  
• Erase Outbox: Delete all unlocked messages from the Outbox.  
3. Enter or change the recipient’s number and/or Email  
address, message subject, and the message text using the  
• Message Info: Displays message delivery status, addressee, size,  
and so on.  
4. Select an option to perform its function.  
Draft Box  
4. Press Options to complete the message and set message  
send options. Select one of the following:  
Messages in the Draft Box are those that have been composed  
but never sent. You can return to the Draft Box at any time to  
view, edit, or send a draft message.  
• Preview (pic msg only): Displays a preview of the message.  
• Edit Send To: Displays the Create Txt Msg screen and allows you to  
enter another recipient phone number or email address.  
Create a Draft Message  
1. In standby mode, Messages  
Message. The Create Txt Msg screen displays.  
2. Enter the phone Number or Email address of a recipient,  
then press  
Send Message  
Text  
• Add Quick Text: Inserts a preformatted string of text in the body of  
the message.  
• Save As Draft: Save the message to your Draft folder.  
.
• Priority Level: Choose High Normal, or Low (picture only).  
,
3. Compose your message using the keypad, then press  
Options and select Save As Draft. The message saves to  
the Drafts box.  
• Validity Period: Allows you to set the length of time your text  
messages are stored at the message center while attempts are  
made to deliver them.  
• Deferred Delivery: Sets a delay time before the phone sends a  
message.  
Messages  
55  
 
• Delivery Ack: Choose On or Off — Requests confirmation when  
4. Press Options and select one of the following:  
your message is received.  
• Send: Send the highlighted message to the original recipient, if the  
recipient’s number and/or Email address is included with the draft  
message.  
• Add To Contacts: Save the recipient’s number or Email address as  
a Contacts list entry.  
• Lock Unlock: Block/permit erasure of the highlighted message.  
/
• Remove Pic (Pic Msg only): Remove the picture from your  
message.  
• Add To Contacts: Save the recipient’s number and/or Email  
address to your Contacts.  
• Remove Sound (Pic Msg only): Remove the sound file from your  
message.  
• Save Quick Text: Saves this text to the Quick Text folder as a Quick  
Text message.  
• Add Slide/Erase Slide (Pic Msg only): Inserts a blank page or  
erases the inserted slide in this message.  
• Erase Drafts: Delete all unlocked draft messages.  
• Cancel Message: End composition of this message. You are  
prompted to choose whether to save this message to your Drafts  
folder.  
Voicemail  
New messages in your voice mailbox are indicated by the  
voicemail icon ( ) and are logged in the Voicemail box of the  
Messages menu. Open the Voicemail box to view the Callback #  
(if available), Urgency, and other details of the Voicemail  
message.  
5. Press  
Send when finished composing the message.  
Managing Draft Messages  
1. In standby mode, press Messages  
Drafts. A list of any  
draft messages that you’ve composed displays on the  
screen.  
Listen to Voicemail Now  
Once you’ve received a new voicemail message, you have the  
option to listen to the message now, or listen to the message  
later.  
2. Highlight a message.  
3. Press Erase to remove the highlighted message from the  
Drafts box. At the prompt:  
Select one of the following options:  
Press Yes to erase this draft message.  
Listen Now: Calls your voice mailbox and allows you to listen to your  
Press No to keep this draft message in your Drafts box.  
messages.  
56  
Listen Later: Returns you to standby mode where you can later  
• Outbox: Deletes all unlocked messages stored in the Outbox.  
choose to call your mailbox and review your messages.  
• Drafts: Deletes all unlocked messages stored in the Drafts box.  
Listen to Voicemail Later  
• All Messages: Deletes all unlocked messages stored in all of the  
message boxes, except Voicemail.  
If you choose to review your voicemail messages at a later time:  
2. Select the messages that you wish to delete. You’re  
prompted to confirm the erasure of all messages in the  
selected box or in all boxes.  
1. In standby mode, press Messages  
Voicemail. The  
Voicemail screen displays on the screen, showing the  
number of new voicemail messages received and the date  
and time the latest message was received.  
3. Press Yes to delete the messages.  
– or –  
2. Highlight a voice message.  
Press No to cancel deleting the messages.  
3. Press  
or  
to call your voice mailbox and listen to  
the message.  
Message Settings  
Use the Msg Settings sub-menus to define general settings and  
Tip: Press and hold  
to dial your voice mailbox.  
text message settings.  
Erase Messages  
Using Erase Messages, you can erase all of the messages in  
each of your boxes from one convenient location.  
1. In standby mode, press Messages  
select the type of message settings General  
or Picture Message  
General Msg Settings  
• Auto Save: Choose whether your messages are saved  
automatically when you exit them (On, Off Prompt).  
Msg Settings and  
,
Text Message  
,
:
Note: This function erases all messages in a selected box. To delete a single  
message, open the box from the Messages menu, highlight a message,  
,
open the message if you want, then press Erase  
.
• Auto Erase: Choose to automatically erase (On) or not erase (Off)  
old received messages after you view them and new messages  
require storage space.  
1. In standby mode, press Messages  
Erase Messages.  
The following options display on the screen:  
• Quick Text: Allows you to configure the Quick Text messages.  
• Inbox: Deletes all unlocked messages stored in the Inbox.  
Messages  
57  
       
• Voicemail #: Enter the voicemail number to the voice mailbox  
answering this dialed number.  
• Entry Mode: Choose the default method for entering text into  
messages.  
• callback #: Choose whether to include a callback phone number  
with your outgoing messages, and enter the number to include.  
• Signature: Choose whether to include a text signature in  
outgoing message text, and enter the text to include.  
• Reminder: Choose a time period to have your phone repeat an  
alert, from Once, Every 2 Minutes, Every 15 minutes, or Off for  
no reminders  
.
Text Message Settings  
• Auto View: Choose to automatically view new messages when  
they are received (On) or access new message content later in the  
Inbox folder (Off).  
• Signature: Choose whether to include a text signature in outgoing  
message text, and enter the text to be included.  
• Auto Scroll: Choose to automatically scroll through new message  
content when received (On) or manually scroll through it (Off).  
• Message View: Choose whether to view text messages as a Chat  
session or individually (Normal).  
Picture Message Settings  
• Auto Receive: Automatically receives picture messages without  
confirmation.  
• Signature: Adds your signature to the Picture Message.  
58  
Section 7: Camera  
Use your R261 phone to take full color digital pictures, display  
them on your phone’s vivid color display, and instantly share  
them with family and friends. It’s fun, and as easy to use as a  
traditional point-and-click camera. This section explains how you  
can do the following:  
Taking Single Shots  
To take a single picture using the current camera settings, do the  
following:  
1. In standby mode, press and hold the Camera key (  
)
to activate the camera. The message “Please, Wait...  
Take pictures with the phone’s built-in digital camera.  
Send pictures to others in Picture messages.  
Set the options associated with the camera that help you take crisp,  
clear pictures.  
displays on the screen followed by a camera view finder  
Note: You can also activate the camera by pressing  
Menu, then  
Taking Pictures  
selecting Multimedia Camera.  
Taking pictures with the built-in  
camera is as simple as launching  
the camera, choosing a subject,  
pointing the lens (located on the  
front of your phone’s flip, near the  
hinge), and pressing a button.  
2. Using the display as a viewfinder, point the camera lens at  
your subject.  
3. When the image that you wish  
to capture displays on the  
screen, press  
Take.  
4. Press Save to save the picture to  
memory.  
– or –  
Press Cancel to erase the photo.  
Camera  
59  
       
2. Press Options. The options  
menu bar displays at the top of  
the camera screen.  
Tip: You can change a number of the camera’s settings to suit particular  
uses for your pictures. See “Picture Options” on page 63 for more  
information.  
3. Highlight Shot Type.  
The following Shot Type  
options display:  
Pictures  
When taking pictures of moving subjects or subjects you cannot  
pose, such as children and pets, the camera’s Multi Shot mode  
simplifies the process of taking multiple pictures in quick  
succession. After taking Multi Shot pictures, the camera  
automatically displays thumbnail views of the pictures you have  
just taken so you can select the best picture(s) and discard the  
rest.  
Single Shot  
:
: Lets you take  
1 photo at a time.  
Series Shot  
:
: Lets you take  
a series of 5 separate photos.  
Mosaic Shot  
4 or 9 shots.  
:
: Lets you take a 2x2 or 3x3 mosaic photo of  
1. In standby mode, press and hold the Camera key (  
The message “Please, Wait...” displays on the screen  
followed by a camera view finder screen. Your phone is  
).  
Frame Shot  
around your photos.  
:
: Lets you select a colorful frame to include  
4. Select Series Shot or Mosaic Shot and select the desired  
setting.  
A Series Shot progress bar (  
) or  
a Mosaic Shot icon (  
while pictures are taken) displays on the screen.  
) (which acts as a progress bar  
Tip: You can also activate the camera by pressing  
Menu, then selecting  
Multimedia Camera.  
5. Using the display as a viewfinder, point the camera lens at  
your subject.  
60  
6. Press  
Take when the image that you wish to capture  
Camera Screen Layout  
displays on the screen. The camera takes one picture  
(Single Shot or Frame Shot) or multiple pictures in quick  
succession (Series Shot or Mosaic Shot). The picture  
displays on the screen.  
When you activate your phone’s camera, the bottom portion of  
the screen contains menu selections or options while the center  
of the screen displays a viewfinder image of the subject at which  
the camera is pointed.  
Series Shot  
Camera Screen Soft Keys  
1. Press Done to save the pictures  
The soft key labels on the bottom line of the display change to  
the following:  
to memory.  
2. Press Mark  
/
Unmark to select/  
Gallery: Pressing the Left soft key opens the My Images multimedia  
folder so you can view or manage your stored pictures. (See “Gallery”  
on page 63 for more information.)  
deselect pictures for erasure.  
3. Press Erase to discard the  
Take: Press  
to take a picture of the subject.  
pictures.  
Options: Pressing the Right soft key opens a menu bar of camera  
options and settings.  
Camera Options  
Mosaic Shot  
1. Press Save to save the picture  
to memory.  
The Camera Options let you temporarily adjust default camera  
settings to suit available lighting, the subject of the photo, or the  
purpose of the photo, for the current camera session.  
2. Press Send  
(
) to send the  
To access Camera Options, do the following:  
picture in a picture message.  
In camera mode, press Options. The Camera Options  
3. Press Cancel to discard the  
menu displays, containing the following sub-menus: Single  
picture.  
Shot: Takes one photo each time you press  
Take.  
Camera  
61  
     
• Series Shot: Takes a series (  
photos automatically or manually when you press  
) of  
Take  
• White Balance: Indicates camera’s white balance setting. (You  
can change the camera white balance setting. Selections are:  
.
The number of photos taken depends upon the Series Shot  
setting.  
Auto: The camera automatically adjusts picture quality to available light.  
Sunny: Use this setting when taking pictures in full sun.  
• Mosaic Shot: Takes multiple shots individually when you  
Cloudy: Use this setting when taking pictures in cloudy conditions.  
press  
Take. The number of shots taken depends upon  
Tungsten: Use this setting when taking pictures under incandescent  
lights.  
the Divided Shot setting. All shots are combined into a single,  
mosaic photo.  
Fluorescent: Use this setting when taking pictures under fluorescent  
lights.  
• FrameShot: Takes one photo each time you press  
Each photo is surrounded by a selected, colorful frame.  
Take.  
• Color Effect: Changes the effects of your shots. Selections are:  
• Resolution: Indicates camera’s current resolution setting. (You  
can change the camera resolution setting. Resolution settings  
are:  
Normal: Subjects and pictures display with a normal hue.  
Black&White: Subjects and pictures display in black and white.  
Sepia: Subjects and pictures display in a brownish-gray hue.  
Negative: Subjects and pictures display in inverted colors.  
Green: Subjects and pictures display in a greenish hue.  
Aqua: Subjects and pictures display in a blue-greenish hue.  
640 X 480 (pixels)  
320 X 240 (pixels)  
128 X 96 (pixels)  
Note: The Resolution setting affects Zoom capabilities. When Resolution is  
• Settings  
:
set to 640 X 480, Zoom is not available. When Resolution is set to any  
value lower than 640 X 480, Zoom settings  
1
8
are available.  
Auto Save  
this feature.  
Icon Display: Options include:  
:
On activates the Auto Save feature, while Off deactivates  
• Night Shot: Lets you take photos in low light.  
-
-
-
Display All: Displays camera icons.  
• Self Timer: Delays the camera shutter for 2, 5, or 10 seconds  
Guideline: Displays a cross hatch pattern in the view finder screen.  
No Icons: Displays a nearly full-display subject image and without  
icons.  
after you press  
.
• Quality: Indicates camera’s picture quality setting. (You can  
change the picture quality setting. Selections are: SuperFine  
Fine, or Normal  
,
.
62  
View Mode: Selections are:  
Brightness  
-
-
Landscape: Your pictures are wider than they are tall.  
Portrait: Your pictures are taller than they are wide.  
Brightness lets you temporarily lighten the pictures you take.  
Increasing the Brightness (-4 – +4) lightens your pictures (0 is  
normal).  
Shutter Sound: makes a sound when you press the Camera key to  
take a photo. Selections are: Off Shutter OK, or DingDong  
,
,
.
In camera mode, press the Navigation key Left or Right to  
adjust the Brightness (the screen image lightens or  
darkens to show the affects of your changes).  
Reset Settings: Yes resets the camera settings to default values. No  
maintains the current camera settings.  
Picture Options  
After you take a picture, the following options are available (if  
Auto Save is set to Off):  
Save: Press Save to save this shot.  
The next time you press  
or darker picture according to your selected Brightness  
setting.  
, the camera takes a lighter  
Gallery  
Pictures are stored in the My Images folder, which is part of the  
phone’s memory and/or card memory devoted to storing, browsing,  
and viewing saved pictures. (See “Gallery” on page 63 for more  
information.)  
Saved pictures are stored in the My Images folder. You can  
browse the pictures one at a time (expanded mode), or view  
several pictures at once in thumbnail format.  
Send to someone else by pressing  
Send.  
1. In camera mode, press Gallery. Any saved pictures display  
on the screen.  
Tip: You can also access the My Images folder by pressing Menu and  
Cancel to discard the picture.  
selecting Multimedia  
Note: If Auto Save is set to On, these options are not available.  
After pressing Take, the picture automatically saves.  
2. Use the Navigation key to browse pictures in the gallery.  
3. Press Options while viewing pictures in the Gallery and  
select the desired option to perform the function.  
4. Select the automatic save value of your choice. You’re  
returned to the camera viewfinder screen.  
Camera  
63  
           
Send: Send the currently displayed or highlighted picture as a  
Picture message.  
Set As: Assign the currently displayed or highlighted picture to be  
standby screen Main Wallpaper, as a Picture ID for someone in your  
Contacts list, or as Front Wallpaper.  
Send Pictures  
Take a picture and send it to anyone with a compatible device in  
a few easy steps.  
1. Press  
Take in camera mode to take a picture.  
Erase Images: Erase selected unlocked pictures in the Picture  
Gallery. Locked pictures must be unlocked before you can erase  
them.  
2. Press  
Send. The Create Pic Msg screen displays.  
3. Enter or Add the recipient’s phone number or Email  
address using the keypad.  
Rename: Rename the currently displayed or highlighted picture.  
Lock Unlock: Lock the currently displayed or highlighted picture  
/
4. Press  
OK. The address(es) save and the Subject field  
so that it cannot be deleted, or unlock the picture so that it can be  
deleted.  
displays on the Create Pic Msg screen. Use the Navigation  
key to move to the other message fields. (For more  
• Slide Show: View your photos and other images as an automatic  
slide show.  
5. Press  
Send to send the Picture message to the  
intended recipients When you are finished composing your  
message.  
Image Info: View the Title, time and date created, size, and  
resolution of the currently highlighted or displayed picture.  
Switch From Expanded to Thumbnail Mode  
1. Highlight a picture that you wish to view full size, then  
press  
VIEW  
.
2. Press  
LIST to return to the thumbnail view of your  
photos.  
64  
   
Section 8: Brew  
The Brew application allows you to download full featured  
applications over the air including games, personalized ring  
tones, pictures, and more. You can send and receive instant  
messages and email, or browse the web to catch up on all the  
latest news.  
For more information, contact your Wireless Carrier.  
Launching Brew  
1. In standby mode, press  
Menu  
Brew  
Brew.  
The Brew menu displays on the screen as shown.  
Applications Shopping and Downloading (Brew)  
Download games, ring tones, e-mail, and more using Mobile  
Shop.  
Note: For information on airtime charges, contact your Wireless Carrier.  
At the Brew menu, highlight MobileShop, then  
press Catalog and follow the instructions in your  
phone’s display.  
Note: Please check with your Wireless Carrier for availability of applications.  
Brew  
65  
         
Section 9: Multimedia and Web  
This section outlines your phone’s multimedia and web functions.  
My Images  
Accessing Multimedia  
1. In standby mode, press  
My Images lets you choose the  
pictures that display on your phone’s  
screen while in standby mode  
(Wallpaper) and as picture IDs for your  
contacts.  
Menu, then select  
Multimedia. The following sub-menus display on the  
screen:  
Camera: Lets you launch and set up your phone’s camera. (For  
1. From the Multimedia menu,  
select My Images. A matrix of  
thumbnail images of your  
My Images: Lets you choose the pictures that display on your  
phone’s screen or in picture messages.  
pictures displays on the screen.  
My Ringtones: Lets you assign ringtones for Ringtone (calls),  
Contact ID, and Alert Tone.  
Tip: You can also access My Images from:  
Tip: To launch the Multimedia menu using a voice command — In standby  
– The Camera screen by pressing Gallery  
mode, press and hold  
until the phone prompts, “Say a command.”  
Say “Go to Multimedia” into the microphone.  
– The Edit Contact screen by selecting the picture ID field and pressing  
Set.  
2. Select the desired sub-menu. The following sections  
2. Highlight an image, then do one of the following:  
describe the above listed sub-menus in greater detail.  
Press Camera to the Camera viewfinder screen and take a picture.  
Press VIEW to expand the highlighted image to fill the screen.  
Press the Options to access the following options:  
Send: Send a copy of the selected image in a Picture message or to  
another device over a Bluetooth connection.  
66  
       
Set As: Assign the selected picture as the Main Wallpaper, as the  
Picture ID for a Contact, or as the Front Wallpaper  
Erase Images Erases one or more selected images.  
Rename: Change the file name of the selected image.  
Lock Unlock: Prevent/permit deletion of the selected image.  
Tip: You can also access My Ringtones from:  
.
:
–A Set Alarm screen by selecting the Ringer option, highlighting the  
second (file name) field, pressing the Left or Right navigation key, and  
selecting My Ringtones.  
/
Slide Show: View your images as an automatic slide show.  
–The Edit Contact screen by selecting the Ringtone field, pressing Set,  
and selecting My Ringtones.  
Image Info: Displays information about the selected image, such as  
the file Name, creation Date and Time  
,
Resolution, and the data  
Size.  
3. Press  
to return to the previous menu.  
to return to standby mode.  
2. Highlight a ringtone or recorded voice memo. The  
– or –  
following options are available:  
Press Set As to assign the highlighted ringtone. The following  
options display on the screen:  
Press  
My Ringtones  
Ringtone: Lets you assign the selected ringtone to incoming voice  
calls.  
My Ringtones lets you assign  
ringtones (preloaded, recorded, and  
downloaded) for Ringtone, Contact ID,  
and as Alert Tone.  
Contact ID: Lets you assign the selected ringtone as the distinctive  
ringer for a Contact.  
Alert Tone: Lets you assign the selected ringtone to All Msg  
Msg Picture Msg, or Voicemail Msg  
Press Play to hear the selected file.  
,
Text  
,
.
1. From the Multimedia menu,  
select My Ringtones. A list of  
ringtones and recorded voice  
memos displays on the screen.  
Press Options, to access the following additional options:  
Note: The Send  
,
Lock  
/
Unlock, Erase, and Rename options are not available  
for preloaded ringtones.  
Send: Send a copy of the highlighted file in a Picture message.  
Multimedia and Web  
67  
 
Lock Unlock: Prevent/permit deletion of the highlighted file.  
/
1. From the Multimedia menu,  
select My Ringtones ➔  
Erase: Delete the highlighted file.  
Record New. The Record New  
screen displays on the screen.  
Rename: Change the name of the highlighted file.  
Ringtone Info: Displays information about the selected file, such as the  
file name, the file type, and the data size.  
2. Press  
Rec, then start  
3. Press  
to return to the previous menu.  
speaking. As it is recording the  
phone displays a countdown  
timer that displays the seconds  
remaining for the recording.  
– or –  
Press  
to return to standby mode.  
Record New Voice Memo  
3. Press Pause to pause the  
memo.  
You can use your phone to record voice memos for later  
playback.  
4. Press Resume to continue recording when a memo is  
paused.  
Note: The maximum length for a single voice memo is 60 seconds.  
5. Press  
Save once you’re finished recording. The new  
The maximum number of voice memos you can record is limited by  
available (unused) memory in your phone.  
recording is automatically saved.  
6. Press  
to discard a recording.  
Brew  
The Brew application allows you to download full featured  
applications over the air including games, personalized ring  
tones, pictures, and more. You can send and receive instant  
messages and email, or browse the web to catch up on all the  
latest news.  
68  
   
Note: For more information, contact your Wireless Carrier.  
Note: Air time charges may apply. Please check with your Wireless Carrier.  
Launching Brew  
2. Press Continue and browse.  
In standby mode, press  
Menu  
Brew  
Brew.  
The Brew menu displays on the screen as shown.  
Applications Shopping and Downloading (Brew)  
Download games, ring tones, e-mail, and more using Mobile  
Shop.  
Note: For information on airtime charges, contact your Wireless Carrier.  
At the Brew menu, highlight MobileShop, then  
press Catalog and follow the instructions in your  
phone’s display.  
Note: Please check with your Wireless Carrier for availability of applications.  
Web Browser  
Use your phone’s Browser to conveniently surf the web and  
download ringtones and wallpapers.  
1. In standby mode, press  
Get In Web  
Menu  
Browser  
.
Multimedia and Web  
69  
       
Section 10: Tools  
This section explains how to use your phone’s productivity  
assistance tools and utilities to schedule events, set reminders,  
perform calculations, and more.  
Bluetooth  
Bluetooth is a short-range wireless communications technology  
capable of exchanging information over a distance of about 30  
feet without requiring a physical connection.  
Tools Menu  
Tools is a suite of Personal Information Manager (PIM)  
applications such as a Calendar, and Memo Pad that run on your  
phone. You can use your phone to schedule events, set  
reminders, perform calculations, and more with the functions  
provided by this useful feature.  
Unlike infrared, you don't need to line up the devices to beam  
information with Bluetooth. If the devices are within a range of  
one another, you can exchange information between them, even  
if they are located in different rooms.  
The Bluetooth wireless technology settings menu provides the  
ability to view and change the device name, show the visibility,  
and set the security for the device.  
Opening Tools Menu  
1. In standby mode, press  
Menu Tools. The Tools  
menu displays on the screen.  
Turn Bluetooth On/Off  
When your phone’s Bluetooth function is turned on, you can use  
the Bluetooth features available. When the Bluetooth function is  
turned off, you cannot send or receive information via Bluetooth.  
Tip: To launch the Tools menu using a voice command — In standby mode,  
press and hold  
until the phone prompts, “Say a command.” Say  
Go to Tools” into the microphone.  
2. Select the desired Tool sub-menu.  
To save battery life or in situations where Bluetooth use is  
prohibited, such as airline traveling, you can turn off the  
Bluetooth wireless technology function.  
The following sections provide detailed descriptions of the  
Tools and how to use their functions.  
(For more information, refer to “Bluetooth Settings” on page 72.)  
70  
       
Registered List  
Place device you are connecting to in discoverable mode  
displays on the screen.  
Registered List provides a list of  
Bluetooth wireless technology  
devices previously connected to your  
handset.  
3. Place the Bluetooth device with which you are connection  
in discoverable mode. (For more information, refer to the  
device user manual.)  
4. Press  
. Names of the  
In standby mode, press  
Menu Tools Bluetooth ➔  
Registered List. The Bluetooth  
screen displays on the screen  
showing a list of devices  
previously connected to your  
device.  
available devices display on  
the screen.  
5. Highlight the device you want  
to pair with your phone and  
press  
selected device with the  
phone. Your phone attempts to  
automatically connect with the  
selected device.  
Pair to pair the  
Add New Device  
To search for available Bluetooth devices:  
1. In standby mode, press  
Menu Tools Bluetooth  
Registered List Add New Device.  
Note: If automatic connecting fails, you are prompted to enter the passkey or  
PIN for the selected device. (For more information, refer to the device  
user manual.)  
If Bluetooth is off, you are prompted to “Turn Bluetooth  
on?”.  
If you are pairing with another handset, both devices prompt you to  
accept an automatically generated PIN. To pair the two handsets, press  
Yes on both devices.  
2. Press Yes to turn Bluetooth on.  
– or –  
Press No to leave Bluetooth off.  
6. The Bluetooth function pairs with the selected device, then  
prompts you to confirm that you want to connect with the  
device now.  
Tools  
71  
 
7. Press Yes to connect with the device now.  
• Supported Profiles: Lists and explains the Bluetooth profiles  
supported by your phone.  
– or –  
• Device Info: Displays the Bluetooth Type, Status, and Address of  
your phone.  
Press No to connect with the device at a later time.  
Connecting to a Bluetooth Device  
Calendar  
From the Registered List,  
Calendar lets you view the current, past, or future month in a  
monthly calendar layout. While viewing the calendar, the current  
date is highlighted and days with scheduled events are  
surrounded by a box.  
1. In standby mode, press  
Menu Tools Bluetooth  
Registered List.  
2. Select the desired device.  
View an event  
Note: If you are unable to pair with the device a pop-up displays on the  
1. In standby mode, press  
screen. Press Yes to retry.  
Menu Tools Calendar.  
A calendar displays on the  
screen with the current date  
highlighted. The month and  
year also display.  
Bluetooth Settings  
1. In standby mode, press  
Menu Tools Bluetooth  
Bluetooth Settings.  
2. Select the desired option to perform the related process.  
• Enable Disable: Turns Bluetooth on or off.  
2. Use the following keys to  
navigate your calendar and  
highlight a desired date.  
/
• Discovery Mode: Lets other devices “see” (access) your device.  
Select On so other devices can see your device, or Off for no  
visibility.  
Use the Left/Right navigation keys to move from one day to another.  
Use the Up/Down navigation keys to move from one week to  
another.  
• Device Name: Displays the handset name. Enter text changes and  
press  
to save them.  
Press the Volume Up key to view previous months.  
Press the Volume Down key to view future months.  
72  
     
3. Press Options while viewing the calendar to access other  
Add a New Event  
options:  
1. In standby mode, press  
Menu Tools Calendar.  
Go to Date: Lets you jump to any date you specify.  
A calendar displays on the  
screen with the current date  
highlighted. The month and  
year also display.  
Go to Today: Lets you jump to today’s date.  
• Weekly: Switches from a full month calendar to a single week  
calendar.  
Erase Old: Lets you erase past events.  
2. Highlight the date of the new  
Erase All: Lets you erase all events.  
event.  
Select the desired option to perform  
the related process.  
3. Press Add. The New Event screen displays on the screen.  
4. Use the Navigation key and the keypad to select and enter  
4. Press  
to open the  
highlighted date. A list of  
scheduled events displays on  
the screen.  
5. Enter the Appointment Name for this event.  
5. Select the desired event.  
Information for the selected  
event displays on the screen.  
6. Enter the dates and times for the event using the following  
formats:  
• Date: mm/dd/yyyy.  
• Time: hh:mm.  
Use the Left and Right navigation keys to change between AM and PM.  
7. When you’re finished entering the dates and times,  
highlight the Recurrence field and select a recurrence  
frequency.  
8. Highlight the Alert field and select a type of alert.  
Tools  
73  
9. Highlight the Reminder field, and set the Reminder to Off  
View, Edit, and Erase Memos  
1. In standby mode, press  
or to select a reminder interval.  
Menu Tools Memo Pad.  
10. Highlight the Alert time field, then select the amount of  
A list of your stored memos displays on the screen.  
time before the event occurs that you wish to be notified.  
2. Highlight the desired memo.  
11. Press  
alert notifies you prior to the event, if one was selected.  
Memo Pad  
Save to store the event in your calendar. An  
3. To view the memo, press  
View.  
4. To edit the memo you are viewing, press Edit.  
Enter text changes using the keypad. (For more  
You can create a notes and store them in Memo Pad. You can’t  
prioritize or set an alert for stored notes. Return to Memo Pad  
anytime you wish to review and edit your notes.  
5. To erase the memo you are viewing, press Options, then  
select Erase. You are prompted to verify the erasure.  
Add a Memo  
1. In standby mode, press  
Press Yes to erase the memo.  
Menu Tools Memo Pad.  
Press No to keep the memo.  
If you have any stored memos, a list of memos display on  
the screen. If this is your first time to view the Memo Pad,  
No memos” displays on the screen.  
Alarm Clock  
Your phone has an alarm clock that can be set to go off once, or  
daily at a specified time. Once set, the alarm clock is easy to  
change or turn off completely.  
2. Press Add to add a new memo.  
3. Enter memo text using the keypad and press  
to save  
Note: The alarm doesn’t function when the phone is turned off. If the time for  
an alarm that was set for Once has elapsed and the phone is off, the  
alarm occurs at the same time on the following day.  
1. In standby mode, press  
Menu Tools Alarm  
Clock. The Alarm Clock screen displays on the screen.  
74  
           
2. Press Add and create a new  
alarm. A Set Alarm 1 screen  
displays the following:  
The alarm icon remains at the top of the display under  
these conditions:  
If the alarm was set as a Daily alarm.  
Alarm  
If the alarm was set as a Mon.-Fri. alarm.  
If the alarm was set as a Weekends only alarm.  
Time  
Frequency  
Ringer  
The alarm icon does not display at the top of the screen if:  
The alarm was set as a Once only alarm.  
3. Highlight the options you wish  
to change, then select values  
for the options.  
Turn Off the Alarm  
Turning off an Alarm stops it from sounding when the set time is  
reached while retaining the Alarm settings for your reuse.  
Use the keypad to enter the Time for the alarm.  
4. Press  
values for the alarm. The Alarm Clock icon (  
at the top of the screen.  
when you’re finished entering and selecting  
1. In standby mode, press  
Menu Tools Alarm  
) displays  
Clock.  
2. Highlight an Alarm.  
Note: If you have enabled Bluetooth on your phone, the Bluetooth icon blocks  
3. Press Options and select Off. The highlighted Alarm is  
turned off, but the alarm settings are retained for later  
reuse.  
the Alarm Clock icon.  
When an Alarm Sounds  
Alarm Options  
An animated alarm clock displays on the screen with the options  
Snooze or Dismiss, and an alert sounds when the specified time  
for the alarm arrives.  
Resetting one or all Alarms erases all of your Alarm settings and  
restores the default settings.  
1. In standby mode, press  
Menu Tools Alarm  
To silence the alarm, select Dismiss.  
Clock.  
Tools  
75  
2. Highlight an existing alarm.  
2. Press the Navigation key Left or  
Right to display the time zone  
and city that you wish to view.  
3. Press Options. Select from the following options:  
• On Off: Enables or disables the highlighted alarm while retaining  
/
the current settings.  
– or –  
• Add new alarm: Define a new alarm.  
• Erase this alarm: Deletes the highlighted alarm.  
• Erase All: Deletes all alarms.  
Press Options and select Go to  
City, then press the Navigation  
key or the Volume key Up or  
Down.  
World Time  
The following time zones/cities  
are supported:  
World Time lets you view the time of  
day or night in another part of the  
world. World Time displays time in  
the 24 different time zones around  
the world.  
Denver  
Miami  
Phonenix  
New York  
Dallas  
Chicago  
La Paz  
Caracas  
Newfoundland BuenosAires Brasilia  
Mid Atlantic  
Paris  
1. In standby mode, press  
Menu Tools World Time.  
A world map displays on the  
screen.  
Cape Verde  
Rome  
Lisbon  
London  
Athens  
Moscow  
Kabul  
Berlin  
Istanbul  
Helsinki  
Tehran  
Nairobi  
Abu Dhabi  
New Delhi  
Bangkok  
Seoul  
Jiddah  
Tashkent  
Kathmandu  
Hong Kong  
Adelaide  
Wellington  
Honolulu  
Mumbai  
Alma-ata  
Beijing  
Colombo  
Jakarta  
Tokyo  
Guam  
Sydney  
Samoa  
Okhotsk  
Midway  
Auckland  
76  
   
Press  
to enter a decimal point. (Calculator only accepts up to 3  
Hawaii  
Alaska  
SanFrancisco Los Angeles  
digits after a decimal point.)  
3. Do one of the following:  
Press to change the sign for a number to a negative.  
Press DST On [the DST on icon ( ) displays] to display Daylight  
Savings Time (DST) for the displayed time zone or press DST Off to  
display standard time.  
3. Use the Navigation key to set the type of calculation that  
you wish to perform. Your choices are as follows:  
Up navigation key: [  
Left navigation key: [  
OK key: [ ] Equals/Total  
Right navigation key: [  
Down navigation key: [  
x] Multiplication  
Press Options and select Set as Home Zone to set the displayed  
time zone as the home time zone for your phone. You are prompted  
to confirm the Home Zone change. Press Yes to save your change.  
The Home Zone marker moves to the displayed time zone.  
-] Subtraction  
=
+] Addition  
Press  
to keep the displayed time zone as a second, default  
÷] Division  
time zone. You are returned to the Tools menu.  
For nested operations [such as (1.81 + 9.34) / 5.22] and to  
calculate powers (such as 3 ), press Operator. The  
Press  
to discard the displayed time zone and close the World  
2
Time screen. You are returned to the Tools menu.  
following options display on the screen:  
Calculator  
(
: Beginning of nested operation  
: Ending of nested operation  
Power: Raise the current number to the power of your next entry  
You can perform calculations,  
including addition, subtraction,  
multiplication, and division using your  
phone.  
)
4. Use the keypad to enter the next number in your  
calculation.  
1. In standby mode, press  
Menu Tools Calculator.  
The Calculator displays on the  
screen.  
5. Repeat steps 3 and 4 as needed.  
6. Press  
to perform the calculation and view the result.  
to clear your last operation or number entry.  
7. Press  
2. Enter the first number in your calculation (numbers can be  
8. Press Clear to clear all of your entries.  
up to 15 digits long).  
Tools  
77  
   
Area  
Stop Watch  
You can use this menu to set a stop  
watch.  
Temperature  
To convert a currency, length, weight, volume, area, or  
temperature, do the following:  
1. In standby mode, press  
Menu Tools Stop Watch.  
1. In standby mode, press  
Menu Tools Converter.  
2. Press  
to Start, Stop, and  
continue the stopwatch count.  
2. Select the conversion feature  
to use. The selected  
conversion feature screen  
displays with the From unit  
field highlighted.  
3. Press Record at the start of  
each succeeding event/lap to  
record the completion time for  
the previous event/lap.  
3. Use the Left and Right  
navigation keys to select the  
unit to convert From.  
4. Press Reset to erase all stop  
watch (lap) times recorded.  
4. Highlight the From quantity field.  
5. Enter the quantity you want converted in the From  
quantity field.  
Converter  
6. Highlight the To unit field and select the units to convert To.  
The converted quantity displays in the To quantity field.  
The conversion menu provides the following conversion features:  
Currency  
Length  
Weight  
Volume  
Note: Press  
to include a decimal point.  
78  
   
Currency — Reviewing/Editing Exchange Rates  
7. Press Cancel to discard your changes and return to the  
Currency Converter screen.  
The Currency Converter includes long-term average exchange  
rates as default values. To review and/or change a default  
exchange rate to the current exchange rate, do the following:  
Currency — Adding Exchange Rates  
You can use the Currency Converter to convert from and to  
obscure currencies by adding exchange rates for these  
currencies. To add a currency and its exchange rate to the  
Currency Converter, do the following:  
1. In standby mode, press  
Menu Tools Converter  
Currency.  
2. Press Rate. The Exchange  
Rate list for the USD (U.S.  
Dollars) currency displays on  
the screen.  
1. In standby mode, press  
Menu Tools Converter  
Currency.  
2. Press Rate. The Exchange Rate list for the USD (U.S.  
3. Highlight the currency  
exchange rate you want to  
review or change.  
Dollars) currency displays on the screen.  
3. Press Add. The Add Exchange  
Rate screen displays on the  
screen with the Base field  
highlighted.  
4.  
P
ress  
Edit to change the  
4. Select the Base currency from  
highlighted exchange rate.  
which to convert.  
5. Use the keypad to change the  
current exchange rate. (For  
more information, refer to  
“Entering Numbers” on  
5. Highlight the Currency field.  
6. Enter an identifier of up to 5  
characters for the new  
6. Press  
to save the  
changed exchange rate.  
Tools  
79  
7. Highlight the Exchange Rate field and enter a decimal  
exchange rate for the new currency using the keypad. (For  
2. Use the keypad to enter the total amount of the bill.  
Note: Press  
to include a decimal point.  
3. Highlight the Tip field and use the keypad to change the tip  
percentage (if needed).  
Note: Press  
to enter the decimal point.  
4. Highlight the # Paying field and use the keypad to change  
The Exchange Rate field only accepts up to 5 digits after the decimal  
point.  
the number of persons paying (if needed).  
The amount of the Tip, the bill Total, and the amount each  
person should pay display on the lower half of the screen.  
8. Press  
to save the new exchange rate. The Exchange  
Rate list for the USD (U.S. Dollars) currency displays on the  
screen with your new exchange rate at the bottom of the  
list.  
Voice SVC  
Voice SVC is state-of-the-art voice recognition software for your  
mobile phone that lets you dial numbers, lookup contact  
information, and open applications using your voice. To access  
your phone’s voice settings, do the following:  
Tip Calculator  
Tip Calculator automatically  
calculates the following amounts:  
Gratuity (tip)  
1. In standby mode, press  
Menu Voice SVC.  
Individual payment (for groups)  
The following options display on the screen:  
Calculations are based on the total  
amount of the check, a selected  
percentage, and the number of  
people paying.  
Voice Commands: Lets you place calls, access your Contacts  
List, review your appointments, and more by speaking commands  
into your phone. (Also see “Voice Dialing” on page 22 and  
“Using Voice Dial” on page 22 for more information.)  
Voice Settings: Lets you adjust Voice SVC to better suit your  
needs.  
1. In standby mode, press  
Menu Tools Tip  
Calculator. The Tip Calculator screen displays on the  
screen with the Bill field highlighted.  
2. Select the desired sub-menu.  
80  
     
Lookup: Lets you look up and display contact information for any name  
stored in your Contacts list by saying the name. (For more information,  
Go to: Lets you access all of the Main Menus on your phone.  
Check: Lets you check your phone's status (that is, network coverage,  
signal strength, and battery in the same report), network coverage,  
signal strength, battery, and phone number.  
Voice Commands  
To start Voice SVC, do one of the following:  
In standby mode, press and hold  
Say a Command” displays on the screen and is pronounced through  
the earpiece, followed by a list of available commands.  
In standby mode, press Menu Voice SVC Voice  
Command  
.
.
Note: Speaking clearly, say the command that you want to use.  
Note: You can also set your phone to start Voice SVC when you open the  
If, after a few seconds, the device has not recognized a command, it  
prompts you to repeat the command.  
phone. (For more information, refer to “Voice Launch” on page 84.)  
If, after a few more seconds, it still has not recognized a command, it  
Voice SVC includes the following commands:  
tells you “Sorry, no match found,” and cancels voice recognition.  
Call: Lets you dial the phone by saying any name stored in your contact  
list, without ever having to record, or “train” that name. Voice SVC  
automatically voice-activates all your contacts, even if you have  
hundreds of them stored on your phone. You can also dial any  
telephone number, even if it is not stored in your contact list, by saying  
Voice Command Tips:  
Make sure you wait for the beep before speaking.  
Speak clearly at a normal volume, as if you were talking on the phone.  
Voice-Activating Your Contacts List  
When you first start Voice SVC, it reads your Contacts list and  
voice-activates all the names stored there. When you have add or  
change contacts, Voice SVC automatically reloads and voice-  
activates the entire list.  
Send Text: Lets you launch the Create Txt Msg screen. (For more  
Send Picture: Lets you launch the Create Pic Msg screen. (For more  
Tools  
81  
 
Ending Calls Before Restarting Voice SVC  
Always On—Voice SVC always displays a choice list, even when  
there is only one choice.  
When you use Voice SVC to make a call, you must end that call  
before you can use Voice SVC again.  
Always Off—Voice SVC never displays a choice list.  
Sensitivity  
Voice Settings  
Choice Lists  
1. In standby mode, press  
Menu Voice SVC, then  
select Voice Settings Sensitivity. The Sensitivity  
Voice SVC uses choice lists when it is not confident it has  
correctly recognized a name or number. In this case, it can  
display a list of up to three possible choices, and prompt you to  
confirm the correct one.  
screen displays on the screen.  
2. Use the Navigation key to adjust the selected Sensitivity  
setting toward Reject More spoken commands or names  
or toward Reject Less spoken commands or names.  
You can change the way that Voice SVC uses choice lists with  
name dialing, digit dialing, and contacts. For each feature, you  
can choose to always see a choice list (even if there is only one  
choice), or never see a choice list (even if there are multiple  
choices). If you leave the setting at “Automatic,” Voice SVC  
displays a choice list only when it is not confident it has correctly  
recognized the name or number.  
3. Press  
to accept the new setting.  
Digit Dialing  
If you regularly have trouble with Voice SVC not recognizing the  
numbers you say, try adapting digit dialing to your voice.  
Adapting can improve the accuracy of digit recognition,  
especially for people with strong regional accents.  
To change the way Voice SVC uses choice lists:  
Note: After you adapt Digit Dial, your phone is customized to your voice, and  
your voice only. Others will not be able to use it unless they reset the  
Digit Dialing to factory defaults. (For more information, refer to “Reset  
Digits” on page 83.)  
1. In standby mode, press  
Menu Voice SVC and  
select Voice Settings Choice Lists.  
2. Select the preferred Choice List behavior:  
Adaptation involves recording several sequences of four digits  
each. The recording process takes about a minute.  
Automatic—Voice SVC displays a choice list only when it is not  
sure if it has correctly recognized the name or number.  
82  
     
Tips for Adapting Digit Dialing  
If you need to re-record, say “No.”  
Use Adapt Digits in a quiet place.  
If you say “No,” the phone prompts you to pronounce the  
digits again. Wait for the beep and then say the digits.  
Make sure you wait for the beep before starting to speak.  
Speak clearly, and say each digit distinctly.  
Repeat this step until you’re satisfied with the recording.  
If you make a mistake while recording a sequence of digits, or if there  
is an unexpected noise that spoils the recording, re-record that  
sequence.  
4. After confirming that the recording sounds “ok”, continue  
the recording process with the next set of digits.  
5. After six sets of digits, the phone asks whether you want to  
Only adapt digits if you are regularly having problems with digit dialing.  
Once you adapt, digit dialing will not work as well for other people  
using your phone. (You can always reset digit adaptation to its original  
state, as described below.)  
do more adaptation. Answer “Yes.”  
6. Repeat steps 4 and 5 for another six sets of digits. After  
the second group of six sets of digits, “Adaptation  
complete” plays through the speaker and you are returned  
to the Adapt Digits menu.  
Adapt Digits  
To adapt digit dialing, do the following:  
Reset Digits  
1. In standby mode, press  
Menu Voice SVC, then  
To reset digit dialing to factory default settings, do the following:  
select Voice Settings Digit Dialing Adapt Digits.  
1. In standby mode, press  
Menu Voice SVC  
2. Press OK to begin the adapt digits process.  
sub-menu, select Voice Settings Digit Dialing ➔  
Reset Digits.  
Your phone displays the first digit sequence and “Please  
say” plays through the speaker followed by the four digits  
displaying on the screen.  
The phone prompts you to confirm digit reset.  
2. Press the OK soft key to reset your digit adaptation.  
3. Wait for the beep and say the digits using your normal tone  
of voice. After a moment, the phone plays back the  
recording and prompts “Did the recording sound ok?”  
If the recording was good, say “Yes.”  
Tools  
83  
Sound  
About Voice SVC  
Sound lets you specify what (if any) text prompts you want your  
phone to read to you through the earpiece.  
This option causes the About Nuance screen to display on the  
screen, showing version and build information about the Voice  
SVC software included on your phone.  
1. In standby mode, press  
Menu Voice SVC, then  
select Voice Settings Sound.  
In standby mode, press  
Menu Voice SVC, then  
2. Select the desired option and setting:  
select Voice Settings About.  
Prompts: Enables (On) or disables (Off) playing of prompts.  
Digits: Enables (On) or disables (Off) playing of digits.  
Names: Enables (On) or disables (Off) playing of names.  
The About Nuance screen displays on the screen showing  
the version level of the Voice SVC (Vsuite) software  
currently installed on your phone.  
Name Settings: Lets you adjust the speed and volume of your  
phone’s audio name playback.  
Voice Launch  
To set the key or action that launches Voice SVC, do the  
following:  
1. In standby mode, press  
Menu Voice SVC, then  
select Voice Settings Voice Launch. The following  
options display on the screen:  
Key Only: Press and hold  
to activate Voice SVC for one call.  
Key/Ear Mic: Attach a headset to your phone. Press and hold  
to activate Voice SVC. Push the button on the headset to  
make and end calls using Voice SVC.  
2. Select the Voice Launch option you want.  
84  
     
Section 11: Changing the Phone Settings  
This section explains how to customize your call and phone  
settings to suit your needs and preferences.  
Phone Info: Access information about your phone, such as your  
phone number, meanings of phone status icons, hardware and  
software versions, and more. (Some of this information is valuable  
to you if you need to call for customer support.)  
Accessing Your Phone’s Settings  
1. In standby mode, press  
Menu Settings.  
Location  
This function identifies your location to the network via the Global  
Positioning System (GPS). You can set this function for  
continuous operation or to operate only in the event that you dial  
and Emergency Number, such as 911. (For more information,  
refer to “Emergency #” on page 94.)  
Tip: To launch the Settings menu using a voice command — In standby  
mode, press and hold  
until the phone prompts, “Say a command.”  
Say “Go to Settings” into the microphone.  
2. Select one of the following options:  
Location: Set your phone to send location data continually or only  
when you dial 911.  
Note: Contact your Wireless Provider to determine whether, when, or where  
location-based services are available.  
• Display Settings: Set your phone’s menu appearance, display  
brightness and contrast, and display content.  
1. In standby mode, press  
Menu Settings ➔  
• Sound Settings: Set your phone’s volume, ringers, keypad tones,  
alerts, and more.  
Location.  
2. Select the desired Locatio setting:  
Call Settings: Set how your phone handles voice and data calls.  
Location On: GPS location is on whenever you make or receive a  
call, wherever the feature is available.  
Phone Settings: Set your phone’s safety, network, and security  
options.  
911 Only: GPS location is on only when you dial 911.  
Memory Info: Select where photos are stored, manage your  
phone’s memory, and format and manage Memory Card storage.  
Changing the Phone Settings  
85  
       
Display Settings  
This section shows you how to change your phone’s menu  
appearance, display brightness and contrast, and display content  
to better meet your needs.  
Note: When you select Front Display, your Wallpaper selection automatically  
changes the Clock Format setting for the Front Clock to Samsung. (For  
more information, refer to “Clock Format” on page 86.)  
3. Select an image type:  
To access the Display Settings sub-menu, do the following:  
My Images: Lets you select a photo you’ve taken or an image that  
you’ve downloaded from the Internet as a wallpaper image.  
In standby mode, press  
Menu Settings ➔  
Display Settings. The Display Settings sub-menu  
displays on the screen.  
Preset Images: Lets you select an image that came preloaded  
with your phone as a wallpaper image.  
4. Select an image from the screen to use and save to your  
The following sub-sections detail the available Display Settings.  
selection.  
Wallpaper  
Clock Format  
Wallpaper lets you choose the images that appear in the  
background of your phone’s front and main displays while your  
phone is closed or in standby mode.  
Clock Format lets you choose the format your phone will use to  
present the current time in your phone’s front display.  
1. In standby mode, press  
Menu Settings Display  
1. In standby mode, press  
Menu Settings Display  
Settings Clock Format  
Settings Wallpaper.  
2. Select either the Main Clock or the Front Clock  
.
2. Select the Display whose Wallpaper you wish to change:  
3. Select one of the formats to display:  
• Main Display  
• Front Display  
86  
       
2. Select the desired theme, then press  
to save  
your setting.  
Samsung  
Celestial  
Dialing Font Size  
Lets you select the size of your dialing font.  
1. In standby mode, press  
Menu Settings Display  
Settings menu, select Dialing Font Size.  
2. Select the desired setting:  
Note: The Clock Format setting for the Front Clock automatically changes to  
Samsung when you change the Wallpaper setting for the Front Display  
.
Normal  
Large  
(For more information, refer to “Wallpaper” on page 86.)  
Banner  
A “Clock Format Set” message displays on the screen, and  
you are returned to the Clock Format menu.  
Create your own 16-character personal greeting that displays on  
the screen when the phone is in Standby mode.  
Theme  
1. In standby mode, press  
Menu Settings ➔  
Lets you select the color theme used to display menu screens  
and popup menus and messages. You can choose from a variety  
of themes.  
Banner.  
2. Press  
, enter the new banner text, then press OK to  
confirm your input.  
1. In standby mode, press  
Menu Settings Display  
Settings menu, select Theme.  
Changing the Phone Settings  
87  
   
Front Contrast  
Backlight  
You can set the backlight for your display or keypad to remain on  
for a specified period of time or remain on as long as the folder is  
open.  
Front Contrast lets you choose the display contrast to suit  
yourself.  
1. In standby mode, press  
Settings Front Contrast  
Menu Settings Display  
.
Note: Prolonged backlight use drains your battery faster.  
2. Use the Left/Right navigation keys to sample any of the 21  
display contrast settings from -50 to +50. The screen  
displays the effects of each new setting.  
1. In standby mode, press  
Menu Settings Display  
Settings Backlight.  
To save the new setting and return to the Display Settings menu,  
press  
2. Select the desired sub menu, then select the desired  
.
setting.  
To return to the Display Settings menu and discard the new  
setting, press  
.
Main Display: Sets the time the internal display backlight remains  
on after a period of inactivity. Optional settings are: 7 seconds 15  
seconds 30 seconds Always On, and Always Off  
,
Sound Settings  
This section shows you how to customize your phone’s audio  
properties, such as ringers, keypad tones, alerts, and more.  
,
,
.
Keypad: Sets the amount of time the keypad backlight remains on  
after a period of inactivity. Optional settings are: 7 seconds  
15 seconds 30 seconds Always On, and Always Off  
,
,
,
.
To access the Sound Settings sub-menu, do the following:  
• Charging: Sets the time the internal display backlight remains on  
In standby mode, press  
Settings. The Sound Settings sub-menu displays on the  
screen.  
Menu Settings Sound  
while connected to a charger and after a period of inactivity.  
Optional settings are: 7 seconds  
,
15 seconds, 30 seconds,  
Always On, and Always Off  
.
Brightness: Sets the brightness of the backlight to one of five  
possible settings.  
88  
       
The following sub-sections detail the available Sound Settings:  
Ringer Type  
Master Volume  
You can assign ringtones or sounds for calls, alarms, and other  
alerts in the Ringer Type sub menu.  
Use the Master Volume option to set the volume for incoming  
1. In standby mode, press  
Menu Settings Sound  
calls and alarms.  
Settings Ringer Type. The following Ringer Types  
display on the screen:  
1. In standby mode, press  
Menu Settings Sound  
Settings Master Volume.  
Voice Calls  
Messages  
2. Use the Navigation key or the Volume key (on the left side  
of your phone) to change the volume level (Silence All,  
Vibrate, Low, Low/Medium, Medium, Medium/High,  
High).  
Text Message  
Picture Message  
Voicemail  
Tip: You can add vibration to Master Volume settings Low  
Vib.on ).  
High. Just press  
2. Select the desired Ringer Type. The My Ringtones screen  
(
displays on the screen.  
Note: The Vibrate icon (  
Vibrate mode. The Vibrate/Ring icon ( ) displays on the screen when  
you press Vib.on ) with Master Volume set to Low High  
) displays on the screen when the phone is in  
Note: Your phone includes preloaded ringtones and recorded sounds. You  
can download additional ringtones using the browser.  
(
.
You can record your own sounds by accessing My Ringtones through  
the Multimedia menu. Select Menu  
Multimedia  
My Ringtones  
Tip: To preview the selected ringtone or alert tone while adjusting the volume  
setting, press Play ( ).  
3. Use the Navigation key to scroll through the ringtones and  
3. Press  
to set the volume level/vibrate mode.  
sounds for the preferred ringer.  
4. Press Play to play each ringtone or sound.  
5. Press  
to save the desired ringtone or sound selection.  
Changing the Phone Settings 89  
     
Alerts  
2. Select one of the following options:  
Tone Level:  
You can set your phone to sound an alert whenever you enter or  
leave your service area, connect or disconnect a call, and other  
options.  
Use the Volume key or Navigation key to set the keypad Tone Level.  
Press to save your Tone Level setting. You are returned to the Key  
Tone sub-menu.  
Tone Length  
Select Short or Long. You are returned to the Key Tone sub menu.  
Call Settings  
1. In standby mode, press  
Menu Settings Sound  
:
Settings Alerts.  
2. Select the desired option:  
Minute Beep: Sound an alert ten seconds before each elapsed  
minute of a call.  
The Call Settings options let you select how your phone handles  
voice and data calls.  
Roam/SVC Alert: Sound an alert when you leave your home  
service area while on a call.  
To access the Call Settings sub-menu, do the following:  
Call Connect: Sound an alert when you connect a call.  
In standby mode, press  
Settings. The Call Settings sub-menu displays on the  
screen.  
Menu Settings Call  
Power On/Off: Play melodies when you turn your phone on or off.  
• Voice Privacy Alert: Sound an alert when Voice Privacy is  
turned on.  
The following sub-sections detail the available Call Settings.  
3. Select one of the settings:  
Call Answer  
On  
• Off  
Key Tone  
You can select a specific answer mode when you receive an  
incoming call. Your phone can be preset to answer when you do  
any of the following:  
Key Tone allows you to adjust the volume level and length of the  
tone that the keypad generates each time you press a key.  
Press Any Key  
Press the Send key  
Flip Open the phone  
1. In standby mode, press  
Menu Settings Sounds  
Key Tone.  
90  
           
1. In standby mode, press  
Menu Settings Call  
Auto Retry  
Settings Call Answer.  
Auto Retry automatically re-dials a number if the connection fails.  
Depending upon your location, the number of times your phone  
automatically dials the number may vary.  
2. Select a Call Answer method:  
Any Key: Press any key except the  
answer an incoming call.  
,
, or Left soft key to  
1. In standby mode, press  
Menu Settings Call  
Send Key: Press  
to answer an incoming call.  
Settings Auto Retry. The Auto Retry sub-menu with  
the following options displays on the screen:  
Flip Open: Flip open the phone to answer an incoming call.  
Off: Disables automatic redialing of numbers  
Tip: You can set your phone to answer calls automatically, without any input  
Every 10 Seconds: Phone automatically redials a number every  
10 seconds  
from you. (For more information, refer to “Auto Answer” on page 91.)  
Every 30 Seconds: Phone automatically redials a number every  
Auto Answer  
30 seconds  
Auto Answer enables your phone to automatically answer calls  
after a period of time that you specify.  
Every 60 Seconds: Phone automatically redials a number every  
60 seconds  
1. In standby mode, press  
Menu Settings Call  
2. Select the desired setting.  
Settings Auto Answer. The following options display  
on the screen:  
Off: Disables automatic answering of calls  
After 1 Second: Phone automatically answers calls after 1 second  
After 3 Seconds: Phone automatically answers calls after 3  
seconds  
After 5 Seconds: Phone automatically answers calls after 5  
seconds  
2. Select the desired setting.  
Changing the Phone Settings  
91  
   
TTY Mode  
TTY + Talk (VCO): Enables TTY mode and microphone  
TTY + Hear (HCO): Enables TTY mode and earpiece  
TTY Off: Disables TTY mode  
Your phone is fully TTY compatible.  
TTY equipment is connected to your  
phone through the headset connector  
on the right side of the phone. TTY  
Mode must be enabled before you can  
use your phone with a TTY device.  
Note: The TTY icon (  
) displays at the top of the screen when the phone is  
in standby mode.  
Voice Privacy  
1. In standby mode, press  
Voice Privacy lets you choose what level of voice security  
(Standard or Enhanced) your phone uses. When set to Enhanced,  
your phone sounds an alert tone if the network’s voice security  
level drops to Standard.  
Menu Settings Call  
Settings TTY Mode. You are  
prompted to confirm you want  
to change the current TTY Mode setting.  
1. In standby mode, press for Menu Settings ➔  
Note: The “Enabling TTY may impair headset use and non-TTY  
accessory performance” message pops up when you select TTY  
Mode.  
Call Settings  
Voice Privacy.  
2. Select a Voice Privacy setting:  
• Standard: Voice privacy is disabled.  
2. Press the Yes soft key to access the TTY Mode options.  
• Enhanced: Voice privacy is enabled.  
– or –  
Press the No soft key to return to the Call Settings  
sub-menu.  
3. If you pressed Yes, select the desired TTY Mode setting:  
TTY Full: Enables TTY mode and disables microphone and  
earpiece  
92  
   
Language  
Phone Settings  
The Phone Settings options let you tailor your phones basic  
operations. To access the Phone Settings sub-menu, do the  
following:  
The language option on your phone can change the language of  
voice prompts, menus, and key-input.  
1. In standby mode, press  
Menu Settings Phone  
In standby mode, press  
Menu Settings Phone  
Settings Language. The following options display on  
Settings. The Phone Settings sub-menu displays on the  
the screen:  
screen.  
English  
Español  
The following sub-sections detail the available Phone Settings.  
2. Select your language preference.  
Airplane Mode  
Security  
When set to On, Airplane Mode disables all radio functions of  
your phone. This prevents you from receiving or making calls  
(except emergency calls), but allows you to use other features  
(such as the camera and the Tools) safely in sensitive  
environments, such as on board an aircraft.  
Use the Security sub-menu to lock your phone, set up emergency  
numbers, enable or disable voice privacy, set restrictions, and  
other security options.  
To access the Security menu, do the following:  
1. In standby mode, press  
Menu Settings Phone  
1. In standby mode, press  
Settings Security  
Menu Settings Phone  
Settings Airplane Mode.  
.
2. Select the desired Airplane Mode setting:  
The “Enter Code” prompt displays on the screen.  
On: Disables the radio transmitter and receiver in your phone.  
2. Enter the four-digit lock code using the keypad.  
Off: Enables the radio transmitter and receiver in your phone.  
Note: The default lock code is the last four digits of your mobile phone  
number.  
The “Enter Code” prompt disappears and the Security  
menu displays on the screen.  
Changing the Phone Settings  
93  
         
Lock Phone  
2. Enter the new lock code. You’re prompted to re-enter the  
new lock code for verification.  
Locking the phone limits all outgoing calls except calls to 911  
emergency and the three user-programmable emergency  
numbers. You can lock the phone manually during use, or set the  
phone to lock automatically when it is turned on. With the phone  
in lock mode, you can answer incoming calls, but you must  
unlock the phone to place outgoing calls (except to emergency  
and secret numbers).  
3. Enter the new lock code again. Your changes are stored.  
Note: Your phone does not allow you to view the lock code for obvious  
security reasons. If you change the lock code, be sure to write down or  
memorize the new code.  
Emergency #  
Your phone provides the option of storing three emergency  
numbers. Each number can be up to 32 digits in length. All  
emergency numbers can be manually called at any time, even  
when your phone is locked or restricted. This can be a useful  
feature for controlling outgoing calls from your phone.  
1. In standby mode, press  
Settings Security Lock Phone.  
2. Select a Device Lock Mode option:  
Menu Settings Phone  
Lock: Locks the phone immediately. (The phone stays locked until  
you enter the lock code.)  
Unlock: Unlocks the phone.  
Important!: DO NOT depend on this phone as a primary method of calling  
911 or for any other essential or emergency communications.  
On Power up: The phone locks automatically the next time your  
phone is powered on. (The phone stays locked until you enter the  
lock code.)  
Remember to always turn your phone on and check for adequate  
signal strength before placing a call.  
Change Lock  
The default lock code for your phone is generally the last four  
digits of your phone number. It is advisable to change the default  
lock code to a secret code for security purposes.  
Important!: Because of various transmission methods, network parameters,  
and user settings necessary to complete a call from your  
wireless phone, a connection cannot always be guaranteed.  
Therefore, emergency calling may not be available on all  
wireless networks at all times.  
1. In standby mode, press  
Settings Security Change Lock. You’re prompted to  
enter the new lock code.  
Menu Settings Phone  
94  
     
Store Emergency Numbers  
Erase all entries  
Erase all entries erases all information from your Contacts list.  
Note: Emergency number 911 is hard-coded into the phone. 911 is available  
any time, even when the phone is locked or restricted. If you call 911 a  
tone plays and an Emergency prompt displays for the call duration.  
Note: To completely remove any personal information stored on your device,  
1. At the Security sub-menu, select Emergency #.  
2. Select one of three emergency number entries.  
3. Enter an emergency number (up to 32 digits in length).  
1. In standby mode, press  
Menu Settings Phone  
Settings Security Erase All Entries. You’re prompted  
to enter the lock code again.  
4. Press  
to save the number entered.  
2. Enter the four-digit lock code using the keypad.  
Call Emergency Numbers in Lock Mode  
Note: The default lock code is the last four digits of your mobile phone  
number.  
In standby mode, enter the emergency number, then press  
to place the call.  
The “Erase all entries?” prompt displays on the screen.  
3. Press Yes to erase all Contacts list entries.  
– or –  
Resetting the Phone  
Reset Phone returns all setup options to their factory default.  
1. In standby mode, press  
Menu Settings Phone  
Press No to keep the current Contacts list entries.  
Settings Security Reset Phone. At the prompt,  
confirm to restore default settings (except Contacts and  
Voice Dial).  
2. Press Yes to restore default settings.  
– or –  
Press No to retain current settings. The Security sub-menu  
displays.  
Changing the Phone Settings  
95  
 
Restriction  
Note: Default setting for all Restrictions is Allow All  
.
Restriction lets you limit the use of your phone to make outgoing  
calls and/or to receive incoming calls to any numbers, to no  
numbers, or to calls from/to your Contacts.  
NAM Selection  
The NAM Selection option lets you select your preferred system  
(NAM 1 or NAM 2), provided your phone has a NAM 2 number  
programmed.  
1. In standby mode, press  
Menu Settings Phone  
Settings Security Restriction.  
2. Select the type of calls or messages you want to allow or  
restrict.  
Note: For more information, contact your Wireless Provider.  
• Calls: Select restrictions for Incoming and Outgoing voice calls.  
1. In standby mode, press  
Menu Settings Phone  
• SMS Messages: Select restrictions for Incoming and Outgoing Text  
Settings NAM Selection.  
messages.  
2. Select NAM1 or NAM2 and press OK  
.
• MMS Messages: Select restrictions for Incoming and Outgoing  
Picture messages.  
System Select  
• Data: Allow All data calls or Allow None.  
The System Select menu allows you to select the roaming  
setting for your phone.  
3. Select one of the options that display:  
• Incoming: Restrict/allow incoming calls.  
• Outgoing: Restrict/allow outgoing calls.  
1. In standby mode, press  
Menu Settings Phone  
Settings System Select.  
4. Select the call direction you want to allow or restrict.  
• Allow All: No restriction on calls.  
2. Select the desired roaming option:  
• HomeOnly: Your phone is available for normal operation only within  
your designated coverage area.  
• Allow Contacts: (except Data) No restriction on calls to and from  
Contacts only.  
• Automatic: The Preferred Roaming List (PRL) is used to acquire  
service. If no preferred systems are found, any digital system is  
acquired.  
• Allow None: Restrict (block) calls.  
96  
   
Set Time  
Speed Dial  
Use the Set Time option to set the current date and time.  
Enable or disable Speed Dialing of selected Contacts.  
Note: In digital service mode, the Set Time feature is disabled. The network  
Tip: Disabling Speed Dial also disables the Voicemail key function. (For more  
information, refer to “Voicemail Key” on page 11 and to “Setting Up Your  
adjusts time and date automatically.  
1. In standby mode, press  
Menu Settings Phone  
1. In standby mode, press  
Menu Settings Phone  
Settings Set Time.  
Settings Speed Dial.  
2. Select an option:  
2. Select one of the following options:  
Set Date: sets the date for the front display in the following format:  
mm/dd/yyyy.  
• On: Enable Speed Dial (default setting).  
• Off: Disable Speed Dial.  
Set Time sets the time for the front display.  
:
Quick Search  
Note: The hour and minute must be entered using two digits each and in 12-hour  
format.  
Quick Search is an easy way to locate Menu items and Contacts.  
1. In standby mode, press  
Menu Settings Phone  
Setting the Date  
Settings Quick Search.  
1. Enter the current date using your keypad in the following  
format: mm/dd/yyyy.  
2. Select the desired Quick Search setting:  
On: Quick Search is enabled  
2. Press  
to confirm the date setting.  
Off: Quick Search is disabled  
Setting the Time  
Searching for a Contact  
1. Use the Left and Right navigation keys to select am or pm.  
2. Press to confirm the time setting.  
1. In standby mode, press the first few numeric keys that  
correspond to the letters of the Contacts name.  
Changing the Phone Settings  
97  
       
For example, to search for “Sally” you could enter:  
2. Press  
to return to the Settings menu.  
Phone Info  
The Phone Info options show you the hardware and software  
versions of your phone, definitions of the icons that display at the  
tops of the phone screens, and the phone number assigned to  
your phone.  
S
A
L
2. Press the Up navigation key. The Find screen displays on  
the screen showing the Contacts entries with names that  
correspond to your key entries.  
1. In standby mode, press  
Menu Settings Phone  
Settings Security Phone Info.  
3. Highlight the desired Contacts entry.  
2. Select one of the following options:  
4. Press  
to call the highlighted Contact.  
Memory Info  
• Phone Number — Display your phone number.  
• Icon Glossary — Display a list of all icons used on your phone’s  
status bar.  
The Memory Info screen lets you review your phone’s available  
memory and helps you manage your files stored there.  
• Version — Display the phone’s hardware and software versions.  
1. In standby mode, press  
Menu Settings Phone  
3. Press  
to return to the Settings menu.  
Settings Security Memory Info. The Memory Info  
screen displays on the screen showing the following  
information:  
Total Used memory  
• Available unused memory  
• My Images memory usage  
• My Ringtones memory usage  
• Applications memory usage  
• Pic Msg memory usage  
98  
     
Section 12: Health and Safety Information  
This section outlines the safety precautions associated with using  
your phone. The terms “mobile device” or “cell phone” are used  
in this section to refer to your phone. Read this information before  
The low levels of RF cell phones emit while in use are in the  
microwave frequency range. They also emit RF at substantially  
reduced time intervals when in the stand-by mode. Whereas high  
levels of RF can produce health effects (by heating tissue),  
exposure to low level RF that does not produce heating effects  
causes no known adverse health effects.  
using your mobile device  
.
Exposure to Radio Frequency (RF) Signals  
The U.S. Food and Drug Administration (FDA) has published  
information for consumers relating to Radio Frequency (RF)  
exposure from wireless phones. The FDA publication includes the  
following information:  
The biological effects of radio frequency energy should not be  
confused with the effects from other types of electromagnetic  
energy.  
Very high levels of electromagnetic energy, such as is found in  
X-rays and gamma rays, can ionize biological tissues. Ionization  
is a process where electrons are stripped away from their normal  
locations in atoms and molecules. It can permanently damage  
biological tissues including DNA, the genetic material.  
Do cell phones pose a health hazard?  
Many people are concerned that cell phone radiation will cause  
cancer or other serious health hazards. The weight of scientific  
evidence has not linked cell phones with any health problems.  
Cell phones emit low levels of Radio Frequency (RF) energy. Over  
the past 15 years, scientists have conducted hundreds of studies  
looking at the biological effects of the radio frequency energy  
emitted by cell phones. While some researchers have reported  
biological changes associated with RF energy, these studies have  
failed to be replicated. The majority of studies published have  
failed to show an association between exposure to radio  
frequency from a cell phone and health problems.  
The energy levels associated with radio frequency energy,  
including both radio waves and microwaves, are not great  
enough to cause ionization of atoms and molecules. Therefore,  
RF energy is a type of non-ionizing radiation. Other types of  
non-ionizing radiation include visible light, infrared radiation  
(heat), and other forms of electromagnetic radiation with  
relatively low frequencies.  
Health and Safety Information  
99  
         
While RF energy does not ionize particles, large amounts can  
increase body temperatures and cause tissue damage. Two  
areas of the body, the eyes and the testes, are particularly  
vulnerable to RF heating because there is relatively little blood  
flow in them to carry away excess heat.  
Results of this study did NOT show that cell phones caused brain  
cancer. In this study, most people had no increased risk of brain  
cancer from using cell phones. For people with the heaviest use  
of cell phones (an average of more than ½ hour per day, every  
day, for over 10 years) the study suggested a slight increase in  
brain cancer. However, the authors determined that biases and  
errors prevented any conclusions being drawn from this data.  
Additional information about Interphone can be found at  
Research Results to Date: Is there a connection between RF  
and certain health problems?  
The results of most studies conducted to date say no. In addition,  
attempts to replicate and confirm the few studies that have  
shown a connection have failed.  
Interphone is the largest cell phone study to date, but it did not  
answer all questions about cell phone safety. Additional research  
is being conducted around the world, and the FDA continues to  
monitor developments in this field.  
The scientific community at large therefore believes that the  
weight of scientific evidence does not show an association  
between exposure to Radio Frequency (RF) from cell phones and  
adverse health outcomes. Still the scientific community has  
supported additional research to address gaps in knowledge.  
Some of these studies are described below.  
International Cohort Study on Mobile Phone Users (COSMOS)  
The COSMOS study aims to conduct long-term health monitoring  
of a large group of people to determine if there are any health  
issues linked to long-term exposure to radio frequency energy  
from cell phone use. The COSMOS study will follow  
Interphone Study  
Interphone is a large international study designed to determine  
whether cell phones increase the risk of head and neck cancer. A  
report published in the International Journal of Epidemiology  
(June, 2010) compared cell phone usage for more than 5,000  
people with brain tumors (glioma and meningioma) and a similar  
number of healthy controls.  
approximately 300,000 adult cell phone users in Europe for 20 to  
30 years. Additional information about the COSMOS study can be  
.
100  
RiskofBrainCancerfromExposuretoRadioFrequencyFields  
in Childhood and Adolescence (MOBI-KIDS)  
Support-needed research on possible biological effects of RF for  
the type of signal emitted by cell phones;  
Design cell phones in a way that minimizes any RF exposure to the  
user; and  
MOBI-KIDS is an international study investigating the relationship  
between exposure to radio frequency energy from  
Cooperate in providing users of cell phones with the current  
information on cell phone use and human health concerns.  
communication technologies including cell phones and brain  
cancer in young people. This is an international multi-center  
study involving 14 European and non-European countries.  
Additional information about MOBI-KIDS can be found at  
The FDA also is working with voluntary standard-setting bodies  
such as the Institute of Electrical and Electronics Engineers  
(IEEE), the International Commission on Non-Ionizing Radiation  
Protection (ICNIRP), and others to assure that safety standards  
continue to adequately protect the public.  
.
Surveillance, Epidemiology, and End Results (SEER) Program  
of the National Cancer Institute  
Reducing Exposure: Hands-Free Kits and Other  
Accessories  
Steps to Reduce Exposure to Radio Frequency Energy  
The National Cancer Institute (NCI) actively follows cancer  
statistics in the United States to detect any change in rates of  
new cases for brain cancer. If cell phones play a role in risk for  
brain cancer, rates should go up, because heavy cell phone use  
has been common for quite some time in the U.S. Between 1987  
and 2005, the overall age-adjusted incidence of brain cancer did  
not increase. Additional information about SEER can be found at  
If there is a risk from being exposed to radio frequency energy  
(RF) from cell phones - and at this point we do not know that  
there is - it is probably very small. But, if you are concerned  
about avoiding even potential risks, you can take a few simple  
steps to minimize your RF exposure.  
.
Reduce the amount of time spent using your cell phone;  
Use speaker mode or a headset to place more distance between your  
head and the cell phone.  
Cell Phone Industry Actions  
Although the existing scientific data do not justify FDA regulatory  
actions, the FDA has urged the cell phone industry to take a  
number of steps, including the following:  
Health and Safety Information  
101  
 
Hands-Free Kits  
advertised. Unlike “hands-free” kits, these so-called “shields”  
may interfere with proper operation of the phone. The phone may  
be forced to boost its power to compensate, leading to an  
increase in RF absorption.  
Hands-free kits may include audio or Bluetooth® headsets and  
various types of body-worn accessories such as belt-clips and  
holsters. Combinations of these can be used to reduce RF energy  
absorption from cell phones.  
Children and Cell Phones  
Headsets can substantially reduce exposure because the phone  
is held away from the head in the user's hand or in approved  
body-worn accessories. Cell phones marketed in the U.S. are  
required to meet RF exposure compliance requirements when  
used against the head and against the body.  
The scientific evidence does not show a danger to any users of  
cell phones from RF exposure, including children and teenagers.  
The steps adults can take to reduce RF exposure apply to  
children and teenagers as well.  
Reduce the amount of time spent on the cell phone;  
Use speaker mode or a headset to place more distance between the  
head and the cell phone.  
Because there are no known risks from exposure to RF emissions  
from cell phones, there is no reason to believe that hands-free  
kits reduce risks. Hands-free kits can be used for convenience  
and comfort. They are also required by law in many states if you  
want to use your phone while driving.  
Some groups sponsored by other national governments have  
advised that children be discouraged from using cell phones at  
all. For example, The Stewart Report from the United Kingdom  
made such a recommendation in December 2000. In this report,  
a group of independent experts noted that no evidence exists that  
using a cell phone causes brain tumors or other ill effects. Their  
recommendation to limit cell phone use by children was strictly  
precautionary; it was not based on scientific evidence that any  
health hazard exists.  
Cell Phone Accessories that Claim to Shield the Head from RF  
Radiation  
Because there are no known risks from exposure to RF emissions  
from cell phones, there is no reason to believe that accessories  
which claim to shield the head from those emissions reduce  
risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing  
more than a metallic accessory attached to the phone. Studies  
have shown that these products generally do not work as  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations  
(updated 10/1/2010):  
102  
 
FCC RF Safety Program:  
Radio Frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. Government.  
Environmental Protection Agency (EPA):  
These FCC exposure limits are derived from the  
recommendations of two expert organizations: the National  
Council on Radiation Protection and Measurement (NCRP) and  
the Institute of Electrical and Electronics Engineers (IEEE).  
Occupational Safety and Health Administration (OSHA):  
(Note: This web address is case sensitive.)  
In both cases, the recommendations were developed by scientific  
and engineering experts drawn from industry, government, and  
academia after extensive reviews of the scientific literature  
related to the biological effects of RF energy.  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
The exposure limit set by the FCC for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate (SAR). The SAR is a measure of the rate of  
absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to  
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).  
International Commission on Non-Ionizing Radiation Protection:  
Health Protection Agency:  
US Food and Drug Administration:  
http://www.fda.gov/Radiation-EmittingProducts/  
RadiationEmittingProductsandProcedures/  
The FCC exposure limit incorporates a substantial margin of  
safety to give additional protection to the public and to account  
for any variations in measurements.  
Specific Absorption Rate (SAR) Certification  
Information  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the exposure limits for  
SAR tests are conducted using standard operating positions  
accepted by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual  
SAR level of the phone while operating can be well below the  
Health and Safety Information  
103  
   
maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
FCC ID number which is usually printed somewhere on the case  
of the phone.  
Sometimes it may be necessary to remove the battery pack to  
find the number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website and it  
should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be  
Before a new model phone is available for sale to the public, it  
must be tested and certified to the FCC that it does not exceed  
the exposure limit established by the FCC. Tests for each model  
phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC.  
.
Smart Practices While Driving  
For body-worn operation, this phone has been tested and meets  
FCC RF exposure guidelines when used with an accessory that  
contains no metal and that positions the mobile device a  
minimum of 1.5 cm from the body.  
On the Road - Off the Phone  
The primary responsibility of every driver is the safe operation of  
his or her vehicle.  
Responsible drivers understand that no secondary task should be  
performed while driving whether it be eating, drinking, talking to  
passengers, or talking on a mobile phone - unless the driver has  
assessed the driving conditions and is confident that the  
secondary task will not interfere with their primary responsibility.  
Do not engage in any activity while driving a moving vehicle which  
may cause you to take your eyes off the road or become so  
absorbed in the activity that your ability to concentrate on the act  
of driving becomes impaired. Samsung is committed to promoting  
responsible driving and giving drivers the tools they need to  
understand and address distractions.  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. The maximum SAR values  
for this model phone as reported to the FCC are:  
Head: 0.32 W/Kg.  
Body-worn: 0.66 W/Kg.  
SAR information on this and other model phones can be viewed  
online at http://www.fcc.gov/oet/ea. To find information that  
pertains to a particular model phone, this site uses the phone  
104  
   
Check the laws and regulations on the use of mobile devices and  
their accessories in the areas where you drive. Always obey them.  
The use of these devices may be prohibited or restricted in certain  
areas. For example, only hands-free use may be permitted in  
certain areas.  
automobile. Be sure to consult the state and local laws or  
ordinances where you drive before mounting this device in an  
automobile. Failure to comply with these restrictions could result  
in fines, penalties, or other damages.  
Never mount this device in a manner that will obstruct the  
driver's clear view of the street and traffic.  
Before answering calls, consider your circumstances. Let the call  
go to voicemail when driving conditions require. Remember,  
driving comes first, not the call!  
Never use wireless data services such as text messaging, Web  
browsing, or e-mail while operating a vehicle.  
If you consider a call necessary and appropriate, follow these  
tips:  
Never watch videos, such as a movie or clip, or play video games  
while operating a vehicle.  
Use a hands-free device;  
For more information, go to http://www.ctia.org  
.
Secure your phone within easy reach;  
Place calls when you are not moving;  
Plan calls when your car will be stationary;  
Do not engage in stressful or emotional conversations;  
Battery Use and Safety  
Important!: Handle and store batteries properly to avoid injury or damage  
.
Most battery issues arise from improper handling of batteries  
and, particularly, from the continued use of damaged batteries.  
Let the person with whom you are speaking know that you are driving  
and will suspend the call if necessary;  
Do not disassemble, crush, puncture, shred, or otherwise attempt  
to change the form of your battery. Do not put a high degree of  
pressure on the battery. This can cause leakage or an internal short-  
circuit, resulting in overheating.  
Do not take notes or look up phone numbers while driving;  
Notice regarding legal restrictions on mounting this device in an  
automobile:  
Do not let the phone or battery come in contact with liquids.  
Liquids can get into the phone's circuits, leading to corrosion. Even  
when the phone appears to be dry and appears to operate normally,  
the circuitry could slowly corrode and pose a safety hazard. If the  
Laws in some states may prohibit mounting this device on or  
near the windshield of an automobile. In other states, the law  
may permit mounting this device only in specific locations in the  
Health and Safety Information  
105  
   
phone and/or battery get wet, have them checked by your service  
provider or contact Samsung, even if they appear to be working  
properly.  
a spare battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Important!: Use only Samsung-approved batteries, and recharge your battery  
only with Samsung-approved chargers which are specifically  
designed for your phone.  
Do not place your battery in or near a heat source. Excessive  
heating can damage the phone or the battery and could cause the  
phone or the battery to explode. Do not dry a wet or damp battery with  
an appliance or heat source such as a microwave oven, hair dryer,  
iron, or radiator. Avoid leaving your phone in your car in high  
temperatures.  
Warning!: Use of a non-Samsung-approved battery or charger may present a  
risk of fire, explosion, leakage, or other hazard. Samsung's  
warranty does not cover damage to the phone caused by non-  
Samsung-approved batteries and/or chargers.  
Do not dispose of the phone or the battery in a fire. The phone or  
the battery may explode when overheated.  
Do not use incompatible cell phone batteries and chargers. Some  
websites and second-hand dealers not associated with reputable  
manufacturers and carriers, might be selling incompatible or even  
counterfeit batteries and chargers. Consumers should purchase  
manufacturer or carrier-recommended products and accessories. If  
unsure about whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Do not handle a damaged or leaking battery. Do not let leaking  
battery fluid come in contact with your eyes, skin or clothing. For safe  
disposal options, contact your nearest Samsung-authorized service  
center.  
Avoid dropping the cell phone. Dropping the phone or the battery,  
especially on a hard surface, can potentially cause damage to the  
phone and battery. If you suspect damage to the phone or battery, take  
it to a service center for inspection.  
Misuse or use of incompatible phones, batteries, and charging  
devices could result in damage to the equipment and a possible  
risk of fire, explosion, or leakage, leading to serious injuries,  
Never use any charger or battery that is damaged in any way.  
Do not allow the battery to touch metal objects. Accidental  
short-circuiting can occur when a metallic object (coin, key, jewelry,  
clip, or pen) causes a direct connection between the + and - terminals  
of the battery (metal strips on the battery), for example when you carry  
damages to your phone, or other serious hazard  
.
106  
regarding specific locations may be found at:  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its  
customers to recycle Samsung mobile devices and genuine  
Samsung accessories.  
.
Mail It In  
The Samsung Mobile Take-Back Program will provide Samsung  
customers with a free recycling mailing label. Just go to  
yle_your_phone_page and follow the instructions to print out a  
free pre-paid postage label and then send your old mobile  
device or battery to the address listed, via U.S. Mail, for  
recycling.  
Proper disposal of your mobile device and its battery is not only  
important for safety, it benefits the environment. Batteries must  
be recycled or disposed of properly.  
Recycling programs for your mobile device, batteries, and  
accessories may not be available in your area.  
We've made it easy for you to recycle your old Samsung mobile  
device by working with respected take-back companies in every  
state in the country.  
Dispose of unwanted electronics through an approved recycler.  
To find the nearest recycling location, go to our website:  
Drop It Off  
You can drop off your Samsung-branded mobile device and  
batteries for recycling at one of our numerous Samsung  
Recycling Direct (SM) locations. A list of these locations may be  
Or call, (877) 278-0799.  
Follow local regulations regarding disposal of mobile devices  
and batteries  
.
Dispose of your mobile device and batteries in accordance with  
local regulations. In some areas, the disposal of these items in  
household or business trash may be prohibited. Help us protect  
the environment - recycle!  
Samsung-branded devices and batteries will be accepted at  
these locations for no fee.  
Consumers may also recycle their used mobile device or  
batteries at many retail or carrier-provided locations where  
mobile devices and batteries are sold. Additional information  
Health and Safety Information  
107  
   
Display / Touch-Screen  
Warning!: Never dispose of batteries in a fire because they may explode.  
Please note the following information when using your mobile  
device:  
UL Certified Travel Charger  
The Travel Charger for this phone has met applicable UL safety  
requirements. Please adhere to the following safety instructions  
per UL guidelines:  
WARNING REGARDING DISPLAY  
The display on your mobile device is made of glass or  
acrylic and could break if your mobile device is dropped or  
if it receives significant impact. Do not use if screen is  
broken or cracked as this could cause injury to you.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY  
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE  
PROPERTY DAMAGE.  
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN  
MOBILE DEVICE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
If your mobile device has a touch-screen display, please  
note that a touch-screen responds best to a light touch  
from the pad of your finger or a non-metallic stylus. Using  
excessive force or a metallic object when pressing on the  
touch-screen may damage the tempered glass surface  
and void the warranty. For more information, please refer  
to the “Standard Limited Warranty” on page page 42.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH  
AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF  
THE PROPER CONFIGURATION FOR THE POWER  
OUTLET.  
THIS POWER UNIT IS INTENDED TO BE CORRECTLY  
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR  
MOUNT POSITION.  
108  
       
applications providers, Samsung, and other third-parties  
providing services.  
GPS & AGPS  
Certain Samsung mobile devices can use a Global Positioning  
System (GPS) signal for location-based applications. A GPS uses  
satellites controlled by the U.S. Government that are subject to  
changes implemented in accordance with the Department of  
Defense policy and the 2008 Federal Radio navigation Plan (FRP).  
Changes may affect the performance of location-based  
technology on your mobile device.  
Use of AGPS in Emergency Calls  
When you make an emergency call, the cellular network may  
activate AGPS technology in your mobile device to tell the  
emergency responders your approximate location.  
AGPS has limitations and might not work in your area. Therefore:  
Always tell the emergency responder your location to the best of your  
ability; and  
Certain Samsung mobile devices can also use an Assisted Global  
Positioning System (AGPS), which obtains information from the  
cellular network to improve GPS performance. AGPS uses your  
wireless service provider's network and therefore airtime, data  
charges, and/or additional charges may apply in accordance with  
your service plan. Contact your wireless service provider for  
details.  
Remain on the mobile device for as long as the emergency responder  
instructs you.  
Navigation  
Maps, directions, and other navigation data may contain  
inaccurate or incomplete data, and circumstances can and do  
change over time. In some areas, complete information may not  
be available. Therefore, you should always visually confirm that  
the navigational instructions are consistent with what you see  
before following them. All users should pay attention to road  
conditions, closures, traffic, and all other factors that may impact  
Your Location  
Location-based information includes information that can be  
used to determine the approximate location of a mobile device.  
Mobile devices which are connected to a wireless network  
transmit location-based information. Additionally, if you use  
applications that require location-based information (e.g. driving  
directions), such applications transmit location-based  
safe driving or walking. Always obey posted road signs  
.
information. The location-based information may be shared with  
third-parties, including your wireless service provider,  
Health and Safety Information  
109  
   
Remember that your mobile device may be the only means of  
communication at the scene of an accident; do not cut off the call  
until given permission to do so.  
Emergency Calls  
This mobile device, like any wireless mobile device, operates  
using radio signals, wireless and landline networks, as well as  
user-programmed functions, which cannot guarantee connection  
in all conditions, areas, or circumstances. Therefore, you should  
never rely solely on any wireless mobile device for essential  
communications (medical emergencies, for example). Before  
traveling in remote or underdeveloped areas, plan an alternate  
method of contacting emergency services personnel. Remember,  
to make or receive any calls, the mobile device must be switched  
on and in a service area with adequate signal strength.  
Care and Maintenance  
Your mobile device is a product of superior design and  
craftsmanship and should be treated with care. The suggestions  
below will help you fulfill any warranty obligations and allow you  
to enjoy this product for many years:  
Keep your Samsung Mobile Device away from:  
Liquids of any kind  
Keep the mobile device dry. Precipitation, humidity, and liquids  
contain minerals that will corrode electronic circuits. If the  
mobile device does get wet, do not accelerate drying with the  
use of an oven, microwave, or dryer, because this may damage  
the mobile device and could cause a fire or explosion. Do not  
use the mobile device with a wet hand. Doing so may cause an  
electric shock to you or damage to the mobile device.  
Emergency calls may not be possible on all wireless mobile  
device networks or when certain network services and/or mobile  
device features are in use. Check with local service providers.  
To make an emergency call:  
1. If the mobile device is not on, switch it on.  
2. Enter 911.  
Extreme heat or cold  
3. Press  
to place the call.  
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.  
If certain features are in use (call blocking, for example), you may  
first need to deactivate those features before you can make an  
emergency call. Consult your User Manual and your local cellular  
service provider. When making an emergency call, remember to  
give all the necessary information as accurately as possible.  
Microwaves  
Do not try to dry your mobile device in a microwave oven.  
Doing so may cause a fire or explosion.  
110  
       
Dust and dirt  
cell phones, at high volume settings for long durations may lead  
to permanent noise-induced hearing loss. This includes the use  
of headphones (including headsets, earbuds, and Bluetooth® or  
other wireless devices). Exposure to very loud sound has also  
been associated in some studies with tinnitus (a ringing in the  
ear), hypersensitivity to sound, and distorted hearing. Individual  
susceptibility to noise-induced hearing loss and potential hearing  
problem varies. Additionally, the amount of sound produced by a  
portable audio device varies depending on the nature of the  
sound, the device settings, and the headphones that are used. As  
a result, there is no single volume setting that is appropriate for  
everyone or for every combination of sound, settings, and  
equipment.  
Do not expose your mobile device to dust, dirt, or sand.  
Cleaning solutions  
Do not use harsh chemicals, cleaning solvents, or strong  
detergents to clean the mobile device. Wipe it with a soft cloth  
slightly dampened in a mild soap-and-water solution.  
Shock or vibration  
Do not drop, knock, or shake the mobile device. Rough  
handling can break internal circuit boards.  
Paint  
Do not paint the mobile device. Paint can clog the device’s  
moving parts or ventilation openings and prevent proper  
operation.  
You should follow some common sense recommendations when  
using any portable audio device:  
Always turn the volume down before plugging the earphones into an  
audio source.  
Responsible Listening  
Caution!: Avoid potential hearing loss  
.
Set the volume in a quiet environment and select the lowest volume at  
which you can hear adequately.  
Damage to hearing occurs when a person is exposed to loud  
sounds over time. The risk of hearing loss increases as sound is  
played louder and for longer durations. Prolonged exposure to  
loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that  
using portable audio devices, such as portable music players and  
Be aware that you can adapt to higher volume settings over time, not  
realizing that the higher volume may be harmful to your hearing.  
When using headphones, turn the volume down if you cannot hear the  
people speaking near you or if the person sitting next to you can hear  
what you are listening to.  
Health and Safety Information  
111  
   
Do not turn the volume up to block out noisy surroundings. If you  
choose to listen to your portable device in a noisy environment, use  
noise-cancelling headphones to block out background environmental  
noise. By blocking background environment noise, noise cancelling  
headphones should allow you to hear the music at lower volumes than  
when using earbuds.  
Do not listen at any volume that causes you discomfort. If you  
experience ringing in your ears, hear muffled speech, or experience  
any temporary hearing difficulty after listening to your portable audio  
device, discontinue use and consult your doctor.  
You can obtain additional information on this subject from the  
following sources:  
Limit the amount of time you listen. As the volume increases, less time  
is required before you hearing could be affected.  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Avoid using headphones after exposure to extremely loud noises, such  
as rock concerts, that might cause temporary hearing loss. Temporary  
hearing loss might cause unsafe volumes to sound normal.  
Voice: (800) 222-2336  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
112  
Using Your Mobile Device Near Other Electronic Devices  
National Institute for Occupational Safety and Health (NIOSH)  
395 E Street, S.W.  
Most modern electronic equipment is shielded from Radio  
Frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
mobile device. Consult the manufacturer to discuss alternatives.  
Suite 9200  
Patriots Plaza Building  
Implantable Medical Devices  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4674)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
A minimum separation of six (6) inches should be maintained  
between a handheld wireless mobile device and an implantable  
medical device, such as a pacemaker or implantable cardioverter  
defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
1-888-232-6348 TTY  
Should ALWAYS keep the mobile device more than six (6) inches from  
their implantable medical device when the mobile device is turned ON;  
Should not carry the mobile device in a breast pocket;  
Should use the ear opposite the implantable medical device to  
minimize the potential for interference;  
Operating Environment  
Remember to follow any special regulations in force in any area,  
and always switch your mobile device off whenever it is  
forbidden to use it, or when it may cause interference or danger.  
When connecting the mobile device or any accessory to another  
device, read its user's guide for detailed safety instructions. Do  
not connect incompatible products.  
Should turn the mobile device OFF immediately if there is any reason  
to suspect that interference is taking place;  
Should read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
your wireless mobile device with an implantable medical device,  
consult your health care provider.  
Health and Safety Information  
113  
   
Potentially Explosive Environments  
For more information see: http://www.fcc.gov/oet/rfsafety/rf-  
.
Switch your mobile device off when in any area with a potentially  
explosive atmosphere and obey all signs and instructions. Sparks  
in such areas could cause an explosion or fire resulting in bodily  
injury or even death. Users are advised to switch the mobile  
device off while at a refueling point (service station). Users are  
reminded of the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution areas),  
chemical plants, or where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust, or metal  
powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
Other Medical Devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately  
shielded from external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch your mobile  
device off in health care facilities when any regulations posted in  
these areas instruct you to do so. Hospitals or health care  
facilities may be using equipment that could be sensitive to  
external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle before  
using your mobile device in a motor vehicle. You should also  
consult the manufacturer of any equipment that has been added  
to your vehicle.  
FCC Hearing Aid Compatibility (HAC)  
Regulations for Wireless Devices  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the  
exception of wireless mobile devices under the Hearing Aid  
Compatibility Act of 1988 (HAC Act) to require digital wireless  
mobile devices be compatible with hearing aids.  
Posted Facilities  
Switch your mobile device off in any facility where posted notices  
require you to do so.  
114  
   
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing  
disabilities. While some wireless mobile devices are used near  
some hearing devices (hearing aids and cochlear implants),  
users may detect a buzzing, humming, or whining noise. Some  
hearing devices are more immune than others to this  
interference noise, and mobile devices also vary in the amount of  
interference they generate.  
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements  
and are likely to generate less interference to hearing devices  
than mobile devices that are not labeled. T4 is the better/higher  
of the two ratings.  
Hearing devices may also be rated. Your hearing device  
manufacturer or hearing health professional may help you find  
this rating. Higher ratings mean that the hearing device is  
relatively immune to interference noise. The hearing aid and  
wireless mobile device rating values are then added together.  
The wireless telephone industry has developed a rating system  
for wireless mobile devices to assist hearing device users find  
mobile devices that may be compatible with their hearing  
devices. Not all mobile devices have been rated. Mobile devices  
that are rated have the rating on their box or a label located on  
the box.  
A sum of 5 is considered acceptable for normal use. A sum of 6  
is considered for best use.  
The ratings are not guarantees. Results will vary depending on  
the user's hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated mobile device successfully. Trying out the mobile  
device with your hearing device is the best way to evaluate it for  
your personal needs.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
In the above example, if a hearing aid meets the M2 level rating  
and the wireless mobile device meets the M3 level rating, the  
sum of the two values equal M5. This is synonymous for T  
ratings. This should provide the hearing aid user with “normal  
M-Ratings: Mobile devices rated M3 or M4 meet FCC  
requirements and are likely to generate less interference to  
hearing devices than mobile devices that are not labeled. M4 is  
the better/higher of the two ratings.  
Health and Safety Information  
115  
usage” while using their hearing aid with the particular wireless  
mobile device.  
to stop using the mobile device if such interference cannot be  
eliminated. Vehicles using liquefied petroleum gas (such as  
propane or butane) must comply with the National Fire Protection  
Standard (NFPA-58). For a copy of this standard, contact the  
National Fire Protection Association.  
“Normal usage” in this context is defined as a signal quality that  
is acceptable for normal operation. The M mark is intended to be  
synonymous with the U mark. The T mark is intended to be  
synonymous with the UT mark. The M and T marks are  
recommended by the Alliance for Telecommunications Industries  
Solutions (ATIS). The U and UT marks are referenced in Section  
20.19 of the FCC Rules.  
Cautions  
Any changes or modifications to your mobile device not expressly  
approved in this document could void your warranty for this  
equipment and void your authority to operate this equipment.  
Only use approved batteries, antennas, and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
mobile device warranty if said accessories cause damage or a  
defect to the mobile device. Although your mobile device is quite  
sturdy, it is a complex piece of equipment and can be broken.  
Avoid dropping, hitting, bending, or sitting on it.  
The HAC rating and measurement procedure are described in the  
American National Standards Institute (ANSI) C63.19 standard.  
Restricting Children's Access to Your  
Mobile Device  
Your mobile device is not a toy. Do not allow children to play with  
it because they could hurt themselves and others, damage the  
mobile device, or make calls that increase your mobile device  
bill.  
Other Important Safety Information  
Only qualified personnel should service the mobile device or install the  
mobile device in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty applicable to the device.  
Keep the mobile device and all its parts and accessories out of  
the reach of small children.  
Ensure that any mobile devices or related equipment installed in your  
vehicle are securely mounted.  
FCC Notice and Cautions  
FCC Notice  
Check regularly that all wireless mobile device equipment in your  
vehicle is mounted and operating properly.  
The mobile device may cause TV or radio interference if used in  
close proximity to receiving equipment. The FCC can require you  
116  
           
Do not store or carry flammable liquids, gases, or explosive materials  
in the same compartment as the mobile device, its parts, or  
accessories.  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including installed or  
portable wireless equipment near or in the area over the air bag or in  
the air bag deployment area. If wireless equipment is improperly  
installed and the air bag inflates, serious injury could result.  
Switch your mobile device off before boarding an aircraft. The use of  
wireless mobile devices in aircraft is illegal and may be dangerous to  
the aircraft's operation. Check with appropriate authorities before  
using any function of a mobile device while on an aircraft.  
Failure to observe these instructions may lead to the suspension or  
denial of cell phone services to the offender, or legal action, or both.  
Health and Safety Information  
117  
Section 13: Warranty Information  
Standard Limited Warranty  
dents and cosmetic damage, unless caused by SAMSUNG; (c) defects or  
damage resulting from excessive force or use of a metallic object when  
pressing on a touch screen; (d) equipment that has the serial number or  
the enhancement data code removed, defaced, damaged, altered or  
made illegible; (e) ordinary wear and tear; (f) defects or damage  
resulting from the use of Product in conjunction or connection with  
accessories, products, or ancillary/peripheral equipment not furnished or  
approved by SAMSUNG; (g) defects or damage resulting from improper  
testing, operation, maintenance, installation, service, or adjustment not  
furnished or approved by SAMSUNG; (h) defects or damage resulting  
from external causes such as collision with an object, fire, flooding, dirt,  
windstorm, lightning, earthquake, exposure to weather conditions, theft,  
blown fuse, or improper use of any electrical source; (i) defects or  
damage resulting from cellular signal reception or transmission, or  
viruses or other software problems introduced into the Product; or (j)  
Product used or purchased outside the United States. This Limited  
Warranty covers batteries only if battery capacity falls below 80% of  
rated capacity or the battery leaks, and this Limited Warranty does not  
cover any battery if (i) the battery has been charged by a battery charger  
not specified or approved by SAMSUNG for charging the battery; (ii) any  
of the seals on the battery are broken or show evidence of tampering; or  
(iii) the battery has been used in equipment other than the SAMSUNG  
phone for which it is specified.  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")  
warrants that SAMSUNG's handsets and accessories  
("Products") are free from defects in material and workmanship  
under normal use and service for the period commencing upon  
the date of purchase by the first consumer purchaser and  
continuing for the following specified period of time after that  
date:  
Phone  
1 Year  
1 Year  
90 Days  
1 Year  
Batteries  
Case/Pouch/Holster  
Other Phone Accessories  
What is Not Covered?  
This Limited Warranty is conditioned upon proper use of the Product.  
This Limited Warranty does not cover: (a) defects or damage resulting  
from accident, misuse, abnormal use, abnormal conditions, improper  
storage, exposure to liquid, moisture, dampness, sand or dirt, neglect, or  
unusual physical, electrical or electromechanical stress; (b) scratches,  
118  
       
What are SAMSUNG's Obligations?  
SAMSUNG determines that any Product is not covered by this  
Limited Warranty, you must pay all parts, shipping, and labor  
charges for the repair or return of such Product.  
During the applicable warranty period, provided the Product is  
returned in accordance with the terms of this Limited Warranty,  
SAMSUNG will repair or replace the Product, at SAMSUNG'S sole  
option, without charge. SAMSUNG may, at SAMSUNG's sole  
option, use rebuilt, reconditioned, or new parts or components  
when repairing any Product, or may replace the Product with a  
rebuilt, reconditioned or new Product. Repaired/replaced cases,  
pouches and holsters will be warranted for a period of ninety (90)  
days. All other repaired/replaced Products will be warranted for  
a period equal to the remainder of the original Limited Warranty  
on the original Product or for ninety (90) days, whichever is  
longer. All replaced Products, parts, components, boards and  
equipment shall become the property of SAMSUNG. Except to  
any extent expressly allowed by applicable law, transfer or  
assignment of this Limited Warranty is prohibited.  
You should keep a separate backup copy of any contents of the  
Product before delivering the Product to SAMSUNG for warranty  
service, as some or all of the contents may be deleted or  
reformatted during the course of warranty service.  
What Are The Limits On SAMSUNG’s liability?  
THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF SAMSUNG'S  
RESPONSIBILITIES, AND THE EXCLUSIVE REMEDY REGARDING THE  
PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS  
LIMITED WARRANTY. IN NO EVENT SHALL SAMSUNG BE LIABLE FOR  
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR  
FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF  
USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS OR  
SAVINGS; INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL OR  
PUNITIVE DAMAGES; OR DAMAGES ARISING FROM THE USE OR  
INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS  
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY  
LASTS, OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND  
DISCLAIMERS MAY NOT APPLY TO YOU.  
What must you do to obtain warranty service?  
To obtain service under this Limited Warranty, you must return  
the Product to an authorized phone service facility in an adequate  
container for shipping, accompanied by the sales receipt or  
comparable proof of sale showing the original date of purchase,  
the serial number of the Product and the seller's name and  
address. To obtain assistance on where to deliver the Product,  
please call SAMSUNG Customer Care at 1-888-987-4357. If  
Warranty Information  
119  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS  
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY  
THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH  
THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT, WHETHER SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT  
DISTRIBUTED BY SAMSUNG OR OTHERWISE. RESPONSIBILITY FOR THE  
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY  
OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT RESTS SOLELY  
WITH THE USER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF  
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.  
What is the procedure for resolving disputes?  
ALL DISPUTES WITH SAMSUNG ARISING IN ANY WAY FROM THIS  
LIMITED WARRANTY OR THE SALE, CONDITION OR  
PERFORMANCE OF THE PRODUCTS SHALL BE RESOLVED  
EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND  
NOT BY A COURT OR JURY. Any such dispute shall not be  
combined or consolidated with a dispute involving any other  
person's or entity's Product or claim, and specifically, without  
limitation of the foregoing, shall not under any circumstances  
proceed as part of a class action. The arbitration shall be  
conducted before a single arbitrator, whose award may not  
exceed, in form or amount, the relief allowed by the applicable  
law. The arbitration shall be conducted according to the  
American Arbitration Association (AAA) Commercial Arbitration  
Rules applicable to consumer disputes. This arbitration provision  
is entered pursuant to the Federal Arbitration Act. The laws of  
the State of Texas, without reference to its choice of laws  
principles, shall govern the interpretation of the Limited Warranty  
and all disputes that are subject to this arbitration provision. The  
arbitrator shall decide all issues of interpretation and application  
of this arbitration provision and the Limited Warranty.  
Nothing in the Product instructions or information shall be construed to  
create an express warranty of any kind with respect to the Products. No  
agent, employee, dealer, representative or reseller is authorized to  
modify or extend this Limited Warranty or to make binding  
representations or claims, whether in advertising, presentations or  
otherwise, on behalf of SAMSUNG regarding the Products or this Limited  
Warranty.  
This Limited Warranty gives you specific legal rights, and you may also  
have other rights that vary from state to state.  
For any arbitration in which your total damage claims, exclusive  
of attorney fees and expert witness fees, are $5,000.00 or less  
("Small Claim"), the arbitrator may, if you prevail, award your  
reasonable attorney fees, expert witness fees and costs as part  
120  
of any award, but may not grant SAMSUNG its attorney fees,  
expert witness fees or costs unless it is determined that the claim  
was brought in bad faith. In a Small Claim case, you shall be  
required to pay no more than half of the total administrative,  
facility and arbitrator fees, or $50.00 of such fees, whichever is  
less, and SAMSUNG shall pay the remainder of such fees.  
Administrative, facility and arbitrator fees for arbitrations in  
which your total damage claims, exclusive of attorney fees and  
expert witness fees, exceed $5,000.00 ("Large Claim") shall be  
determined according to AAA rules. In a Large Claim case, the  
arbitrator may grant to the prevailing party, or apportion among  
the parties, reasonable attorney fees, expert witness fees and  
costs. Judgment may be entered on the arbitrator's award in any  
court of competent jurisdiction.  
number; and (d) the IMEI or MEID or Serial Number, as applicable, if  
you have it (the IMEI or MEID or Serial Number can be found (i) on  
the Product box; (ii) on the Product information screen, which can  
be found under "Settings;" (iii) on a label on the back of the  
Product beneath the battery, if the battery is removable; and (iv) on  
the outside of the Product if the battery is not removable).  
Alternatively, you may opt out by calling 1-888-987-4357 no later  
than 30 calendar days from the date of the first consumer  
purchaser's purchase of the Product and providing the same  
information. These are the only two forms of notice that will be  
effective to opt out of this dispute resolution procedure. Opting out  
of this dispute resolution procedure will not affect the coverage of  
the Limited Warranty in any way, and you will continue to enjoy the  
benefits of the Limited Warranty.  
This arbitration provision also applies to claims against  
SAMSUNG'S employees, representatives and affiliates if any  
such claim arises from the Product's sale, condition or  
performance.  
Severability  
If any portion of this Limited Warranty is held to be illegal or  
unenforceable, such partial illegality or unenforceability shall not  
affect the enforceability of the remainder of the Limited Warranty.  
You may opt out of this dispute resolution procedure by providing  
notice to SAMSUNG no later than 30 calendar days from the date of  
the first consumer purchaser's purchase of the Product. To opt out,  
you must send notice by e-mail to [email protected], with  
the subject line: "Arbitration Opt Out." You must include in the opt  
out e-mail (a) your name and address; (b) the date on which the  
Product was purchased; (c) the Product model name or model  
Samsung Telecommunications America, LLC  
1301 E. Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2011 Samsung Telecommunications America, LLC. All rights reserved.  
Warranty Information  
121  
No reproduction in whole or in part allowed without prior written  
approval.  
computer or a mobile device at a time, and you may not make  
the Software available over a network where it could be used by  
multiple computers at the same time. You may make one copy of  
the Software in machine-readable form for backup purposes  
only; provided that the backup copy must include all copyright or  
other proprietary notices contained on the original.  
Specifications and availability subject to change without notice.  
[060111]  
End User License Agreement for Software  
IMPORTANT. READ CAREFULLY: This End User License Agreement  
("EULA") is a legal agreement between you (either an individual  
or a single entity) and Samsung Electronics Co., Ltd. for software  
owned by Samsung Electronics Co., Ltd. and its affiliated  
companies and its third party suppliers and licensors that  
accompanies this EULA, which includes computer software and  
may include associated media, printed materials, "online" or  
electronic documentation ("Software"). BY CLICKING THE "I  
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE  
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,  
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO  
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT  
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE  
"DECLINE" BUTTON, AND DISCONTINUE USE OF THE SOFTWARE.  
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves  
all rights not expressly granted to you in this EULA. The Software  
is protected by copyright and other intellectual property laws and  
treaties. Samsung or its suppliers own the title, copyright and  
other intellectual property rights in the Software. The Software is  
licensed, not sold.  
3. LIMITATIONS ON END USER RIGHTS. You may not reverse  
engineer, decompile, disassemble, or otherwise attempt to  
discover the source code or algorithms of, the Software (except  
and only to the extent that such activity is expressly permitted by  
applicable law notwithstanding this limitation), or modify, or  
disable any features of, the Software, or create derivative works  
based on the Software. You may not rent, lease, lend, sublicense  
or provide commercial hosting services with the Software.  
1. GRANT OF LICENSE. Samsung grants you the following rights  
provided that you comply with all terms and conditions of this  
EULA: You may install, use, access, display and run one copy of  
the Software on the local hard disk(s) or other permanent storage  
media of one computer and use the Software on a single  
4. CONSENT TO USE OF DATA. You agree that Samsung and its  
affiliates may collect and use technical information gathered as  
part of the product support services related to the Software  
provided to you, if any, related to the Software. Samsung may  
122  
 
use this information solely to improve its products or to provide  
customized services or technologies to you and will not disclose  
this information in a form that personally identifies you.  
comply with all applicable international and national laws that  
apply to the Software, including the U.S. Export Administration  
Regulations, as well as end user, end use, and destination  
restrictions issued by U.S. and other governments.  
5. UPGRADES. This EULA applies to updates, supplements and  
add-on components (if any) of the Software that Samsung may  
provide to you or make available to you after the date you obtain  
your initial copy of the Software, unless we provide other terms  
along with such upgrade. To use Software identified as an  
upgrade, you must first be licensed for the Software identified by  
Samsung as eligible for the upgrade. After upgrading, you may  
no longer use the Software that formed the basis for your  
upgrade eligibility.  
8. TERMINATION. This EULA is effective until terminated. Your  
rights under this License will terminate automatically without  
notice from Samsung if you fail to comply with any of the terms  
and conditions of this EULA. Upon termination of this EULA, you  
must cease all use of the Software and destroy all copies, full or  
partial, of the Software.  
9. THIRD-PARTY APPLICATIONS. Certain third-party applications  
may be included with, or downloaded to this mobile device.  
SAMSUNG makes no representations whatsoever about any of  
these applications. Since SAMSUNG has no control over such  
applications, Purchaser acknowledges and agrees that  
6. SOFTWARE TRANSFER. You may not transfer this EULA or the  
rights to the Software granted herein to any third party unless it  
is in connection with the sale of the mobile device which the  
Software accompanied. In such event, the transfer must include  
all of the Software (including all component parts, the media and  
printed materials, any upgrades, this EULA) and you may not  
retain any copies of the Software. The transfer may not be an  
indirect transfer, such as a consignment. Prior to the transfer, the  
end user receiving the Software must agree to all the EULA  
terms.  
SAMSUNG is not responsible for the availability of such  
applications and is not responsible or liable for any content,  
advertising, products, services, or other materials on or available  
from such applications. Purchaser expressly acknowledges and  
agrees that use of third-party applications is at Purchaser's sole  
risk and that the entire risk of unsatisfactory quality,  
performance, accuracy and effort is with Purchaser. It is up to  
Purchaser to take precautions to ensure that whatever Purchaser  
selects to use is free of such items as viruses, worms, Trojan  
horses, and other items of a destructive nature. References on  
7. EXPORT RESTRICTIONS. You acknowledge that the Software is  
subject to export restrictions of various countries. You agree to  
Warranty Information  
123  
this mobile device to any names, marks, products, or services of  
any third-parties are provided solely as a convenience to  
Purchaser, and do not constitute or imply an endorsement,  
sponsorship, or recommendation of, or affiliation with the third-  
party or its products and services. Purchaser agrees that  
SAMSUNG shall not be responsible or liable, directly or indirectly,  
for any damage or loss caused or alleged to caused by, or in  
connection with, use of or reliance on any such third-party  
content, products, or services available on or through any such  
application. Purchaser acknowledges and agrees that your use  
of any third-party application is governed by such third-party  
application provider's Terms of Use, License Agreement, Privacy  
Policy, or other such agreement and that any information or  
personal data you provide, whether knowingly or unknowingly, to  
such third-party application provider, will be subject to such  
third-party application provider's privacy policy, if such a policy  
exists. SAMSUNG DISCLAIMS ANY RESPONSIBILITY FOR ANY  
DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF  
ANY THIRD-PARTY APPLICATION PROVIDER.  
SUCH THIRD-PARTY APPLICATION IS INCLUDED WITH THE  
PRODUCT DISTRIBUTED BY SAMSUNG, IS DOWNLOADED, OR  
OTHERWISE OBTAINED. USE OF ANY THIRD-PARTY APPLICATION  
IS DONE AT PURCHASER'S OWN DISCRETION AND RISK AND  
PURCHASER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO  
YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM  
THE DOWNLOADING OR USE OF SUCH THIRD-PARTY  
APPLICATIONS. SAMSUNG EXPRESSLY DISCLAIMS ANY  
WARRANTY REGARDING WHETHER PURCHASER'S PERSONAL  
INFORMATION IS CAPTURED BY ANY THIRD-PARTY APPLICATION  
PROVIDER OR THE USE TO WHICH SUCH PERSONAL  
INFORMATION MAY BE PUT BY SUCH THIRD-PARTY APPLICATION  
PROVIDER. ANY THIRD-PARTY APPLICATIONS PROVIDED WITH  
THIS MOBILE DEVICE ARE PROVIDED "AS IS" AND ON AN "AS  
AVAILABLE" BASIS, WITHOUT WARRANTIES OF ANY KIND FROM  
SAMSUNG, EITHER EXPRESS OR IMPLIED. TO THE FULLEST  
EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, SAMSUNG  
DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR  
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED  
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR  
WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE,  
RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES,  
QUIET ENJOYMENT, NON-INFRINGEMENT OF THIRD PARTY  
RIGHTS OR OTHER VIOLATION OF RIGHTS. SAMSUNG DOES NOT  
WARRANT AGAINST INTERFERENE WITH YOUR ENJOYMENT OF  
10. Disclaimer of Warranty Regarding Third-Party Applications.  
SAMSUNG DOES NOT WARRANT OR MAKE ANY  
REPRESENTATIONS REGARDING THE AVAILABILITY, USE,  
TIMELINESS, SECURITY, VALIDITY, ACCURACY, OR RELIABILITY OF,  
OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING,  
THE CONTENT OF ANY THIRD-PARTY APPLICATION WHETHER  
124  
THE THRID-PARTY APPLICATION, THAT THE FUNCTIONS  
CONTAINED IN THE THIRD-PARTY APPLICATION WILL MEET  
PURCHASER'S REQUIREMENTS, THAT THE OPERATION OF THE  
THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR  
ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY  
APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE  
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR  
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW  
EXCLUSIONS OR LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS  
MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION,  
WHETHER ORAL OR WRITTEN, OBTAINED BY PURCHASER FROM  
SAMSUNG SHALL BE DEEMED TO ALTER THIS DISCLAIMER OF  
WARRANTY REGARDING THIRD-PARTY APPLICATIONS, OR TO  
CREATE ANY WARRANTY.  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME  
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION  
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE  
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
NOTWITHSTANDING THE FOREGOING, SAMSUNG'S TOTAL  
LIABILITY TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES  
OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON  
CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF  
PURCHASER'S USE OF THIRD-PARTY APPLICATIONS ON THIS  
MOBILE DEVICE, OR ANY OTHER PROVISION OF THIS EULA,  
SHALL NOT EXCEED THE AMOUNT PURCHASER PAID  
SPECIFICALLY FOR ANY SUCH THIRD-PARTY APPLICATION THAT  
WAS INCLUDED WITH THIS MOBILE DEVICE. THE FOREGOING  
LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING  
SECTIONS 9, 10, AND 11) SHALL APPLY TO THE MAXIMUM  
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY  
FAILS ITS ESSENTIAL PURPOSE.  
11. Limitation of Liability. SAMSUNG WILL NOT BE LIABLE FOR  
ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO  
THE USE OR THE INABILITY TO USE ANY THIRD-PARTY  
APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT  
NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO  
ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN  
OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO  
CONNECT, NETWORK CHARGES, AND ALL OTHER DIRECT,  
INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR  
12. U.S. GOVERNMENT END USERS. The Software is licensed  
only with "restricted rights" and as "commercial items"  
consisting of "commercial software" and "commercial software  
documentation" with only those rights as are granted to all other  
end users pursuant to the terms and conditions herein.  
13. APPLICABLE LAW. This EULA is governed by the laws of  
TEXAS, without regard to conflicts of laws principles. This EULA  
shall not be governed by the UN Convention on Contracts for the  
CONSEQUENTIAL DAMAGES EVEN IF SAMSUNG HAS BEEN  
Warranty Information  
125  
International Sale of Goods, the application of which is expressly  
excluded. If a dispute, controversy or difference is not amicably  
settled, it shall be finally resolved by arbitration in Seoul, Korea in  
accordance with the Arbitration Rules of the Korean Commercial  
Arbitration Board. The award of arbitration shall be final and  
binding upon the parties.  
default settings. Please contact the Samsung Customer Care  
Center for details.  
Important!: Please provide warranty information (proof of purchase) to  
Samsung’s Customer Care Center in order to provide this service  
at no charge. If the warranty has expired on the device, charges  
may apply.  
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire  
agreement between you and Samsung relating to the Software  
and supersedes all prior or contemporaneous oral or written  
communications, proposals and representations with respect to  
the Software or any other subject matter covered by this EULA. If  
any provision of this EULA is held to be void, invalid,  
unenforceable or illegal, the other provisions shall continue in full  
force and effect.  
Customer Care Center:  
1000 Klein Rd.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Samsung Telecommunications America, LLC:  
1301 East Lookout Drive  
Richardson, Texas 75082  
Precautions for Transfer and Disposal  
Phone: 1-800-SAMSUNG (726-7864)  
If data stored on this device is deleted or reformatted using the  
standard methods, the data only appears to be removed on a  
superficial level, and it may be possible for someone to retrieve  
and reuse the data by means of special software.  
Important!: If you are using a handset other than a standard numeric keypad,  
dial the numbers listed in brackets.  
Phone: 1-888-987-HELP (4357)  
To avoid unintended information leaks and other problems of this  
sort, it is recommended that the device be returned to Samsung’s  
Customer Care Center for an Extended File System (EFS) Clear  
which will eliminate all user memory and return all settings to  
©2011 Samsung Telecommunications America. All rights  
reserved.  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change  
without notice.  
126  
 
Index  
Browser  
introduction 69  
Adding Speed Dial Numbers 39  
Contacts Groups 41  
Deleting 39  
Editing 36  
Finding 34  
Memory Info 44  
Open Menu 33  
Saving a Number After a Call 39  
Contacts Groups  
Add Contacts 41  
Erase 43  
Numerics  
2-Sec Pause 37  
C
A
Call Functions  
Activating Your Phone 8  
Adding Contacts  
Dial Method 36  
Menu Method 36  
Adjust  
Adjusting the Call Volume 24  
Call Settings 90  
Auto Answer 91  
Auto Retry 91  
Call Answer 90  
TTY Mode 92  
key beep 90  
Ringer Setting 17  
Alerts 90  
Camera  
My Images 63  
Rename 43  
B
Create a Draft Message 55  
Create and Send Text Messages 45  
D
Dialing Font Size 87  
Display / Touch-Screen 108  
Display Setting  
Dialing Font 87  
Display Settings  
Backlight 88  
Picture Options 63  
Camera Mode 18  
Camera Options  
Brightness 63  
Care and Maintenance 110  
Charging the Battery 7  
Travel Adapter 7  
Children and Cell Phones 102  
Clock Format 86  
Contacts  
Battery  
Charging 7  
Installing 5  
Low Battery Indicator 8  
Removing 6  
Battery Use & Safety 105  
Brew  
Applications Shopping and  
Downloading 65, 69  
Launching 65, 69  
Clock Format 86  
Dialing Font Size 87  
Adding 36  
127  
   
Front Contrast 88  
Theme 87  
Wallpaper 86  
Do cell phones pose a health hazard?  
GPS & AGPS 109  
Text Input 18  
My Images 63  
H
N
Health and Safety Information 99  
Navigation Key Shortcuts 16  
I
O
Installing the Battery 5  
International Calls 20  
L
E
Operating Environment 113  
Other Important Safety Information 116  
P
Personal Organizer  
Alarm Clock 74  
Calculator 77  
Calendar 72  
Memo Pad 74  
World Time 76  
Phone  
Command Keys 13  
Display Screen 14  
Display Screen Icons 15  
Modes 16  
Turning Off 8  
Turning On 8  
Phone Info 98  
Phone Settings  
Airplane Mode 93  
Language 93  
Editing Contacts  
Add Pauses 37  
Language Setting 93  
Assigning a Ringtone 38  
Changing Speed Dial Numbers 41  
Email Address 38  
Name and Numbers 36  
Names and Numbers 36  
Emergency Calls 20, 110  
Exposure to Radio Frequency (RF) Sig-  
nals 99  
M
Memo Pad  
Add a Memo 74  
Review, Edit, and Erase Memos 74  
Messages  
Create a Draft Message 55  
Create and Send 45  
Message Boxes 53  
Receive 47  
Settings 57  
Types 45  
Mode  
Call Answer 17  
Camera 18  
F
FCC Hearing Aid Compatibility (HAC)  
Regulations for Wireless Devices 114  
FCC Notice and Cautions 116  
Finding Contacts  
Shortcut Key Method 34  
Voice Method 34  
Handsfree 18  
Lock 19  
Standby 16  
G
Go back one menu 15  
128  
Security 93  
Key Tone 90  
Master Volume 89  
Ringer Type 89  
S
Samsung Mobile Products and Recy-  
cling 107  
Security Settings 93  
Change Lock 94  
Picture Messages  
Online Viewing 52  
Receiving 51  
Send in Camera Mode 48  
Powering the Phone  
Off 8  
Specific Absorption Rate (SAR) Certifi-  
cation Information 103  
Speed Dialing  
One-Touch Dialing 22  
Three Touch Dialing 22  
Two-Touch Dialing 22  
Standard Limited Warranty  
Emergency # 94  
Lock Phone 94  
On 8  
Resetting Your Phone 95  
Restriction 96  
Send Picture Messages 64  
Send Text Messages 45  
Set Time 97  
Q
Quick Search  
contact search 97  
T
R
Settings  
Call Settings 90  
Taking Pictures 59  
Text  
Receive Pic. Messages 51  
Receive Text Messages 47  
Reducing Exposure  
Hands-Free Kits and Other  
Accessories 101  
Removing the Battery 6  
Responsible Listening 111  
Restricting Children's Access to Your  
Mobile device 116  
Return to Last Menu 15  
Ringer Types, Assigning 89  
Roaming 29  
Camera Options 61  
Display Settings 86  
Phone Settings 93  
Security Settings 93  
Sound Settings 88  
Setup  
Entering Emoticons 32  
Entering Numbers 31  
Entering Symbols 32  
Using Abc Mode 31  
Using T9® Mode 31  
Time, Set 97  
Tools  
Tools Menu 70  
Travel Adapter 7  
TTY Mode 92  
Location 85  
Shortcut to menus 16  
Smart Practices While Driving 104  
Sound Settings  
Alerts 90  
129  
U
UL Certified Travel Charger 108  
Use the Travel Adapter 7  
V
Vibrate Mode 17  
Voice SVC 80  
About Voice SVC 84  
Choice Lists 82  
Digit Dialing 82  
Sensitivity 82  
Sound 84  
Voice Commands 81  
Voice Launch 84  
Voicemail  
Listen 9, 57  
Setup 8  
W
Wallpaper 86  
Warranty Information 118  
130  

West Bend L5613B User Manual
Toshiba IK 528A User Manual
Toshiba Computer Drive SD R1312 User Manual
Teac CD Player CD H750 User Manual
Seagate Constellation ST9500620SS User Manual
SanDisk Computer Drive User Manual
Samsung GH68 23417A User Manual
Radio Shack CR 320 User Manual
Philips Xenium CT9A9RBLK User Manual
Philips CT0392BLK User Manual