Samsung JetSet™
( S C H - R 5 5 0
S e r i e s )
P O R T A B L E
M O B I L E
Q U A D - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
Openwave is a registered Trademark of Openwave, Inc.
®
RSA is a registered Trademark RSA Security, Inc.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
™
microSD and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
1
2
FCC Hearing-Aid Compatibility (HAC) Regulations for
3
Section 1: Getting Started
This section explains how this manual is put together, and how to
start using your Samsung Jet Set™ phone by activating your
service and setting up your Voicemail.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly3-used procedural steps:
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 145.
highlight UsetheNavigation key(
) tomoveahighlighting
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
press the OK key ( ) to launch, access, or save a
highlighted menu item or screen field of interest.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 122.
➔
Used in place of “select” in long “drill down”
procedure steps.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
Charging the Battery
•
•
•
Notes: Explain alternative options within the current feature, menu, or
sub-menu.
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
Tips: Provide quick or innovative methods for performing functions
related to the subject at hand.
Important: Points out important information about the current feature
that could affect performance, or even damage your phone.
Getting Started
4
Use the Travel Adapter
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the lower right side of
your phone.
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
1. Plug the large end of the Travel Adapter into a standard
The battery indicator (
) in the upper-right corner of the
120 VAC or 220 VAC wall outlet.
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
•
•
•
Three bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
A blinking empty battery icon (
) and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
5
Remove the Battery
Install the Battery
1. Press and hold
to turn off the phone (if on).
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
2. Press down on the
battery cover release
latch (1) and slide the
cover (2) toward the
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. A fully
discharged battery requires up to 4 hours of charge time.
bottom end of the phone.
1. Insert the top end of the
battery first, matching
the gold contacts on the
inside of the battery to
those on the phone.
3. Lift the battery (3) up and
away from the phone,
bottom end first.
2. Press lightly on the
bottom end of the battery down into the phone until it slips
into place.
3. Place the battery cover
over the battery and slide
the battery cover into
place.
Getting Started
6
Turn Your Phone On
1. Open the flip on your phone,
as shown.
Turn Your Phone Off
ᮣ
Press and hold
powers off.
for two or more seconds. Your phone
2. Press
.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Note: As with any other radio-transmitting
device, do not touch the antenna
while using your phone as this can
affect call quality and can cause the
phone to operate at a higher power
level than is necessary.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
3. The phone begins searching
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
for a network signal.
Press
4. Once the phone finds a
signal, the time, date, and
day appear in the second
line of the display.
1. In standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
5. You’re now ready to place and receive calls.
mail box.
Listen to Voicemail
1. In standby mode, press and hold
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
or dial your own
cannot place or receive calls, try later when service is available, or at
another location.
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting.
7
2. You are prompted to enter your password.
3. Press the memory card up into the slot until the card locks
into place.
Memory Card (Optional)
4. Replace the battery cover.
Your phone has a Memory Card slot on its right side, behind the
battery cover. You can install a microSD card to provide
additional memory for storing files (such as, sound files and
photos) in your phone.
™
Remove a Memory Card
Install a Memory Card
2. Press the memory card up into the slot until the card lock
releases.
3. Remove the memory card from the memory card slot.
2. Insert the memory card — label side facing up and smaller
end pointing toward the phone — into the memory card
slot.
5. Replace the battery cover.
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
3
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
6
7
1
•
•
•
•
•
•
•
•
•
High speed data (CDMA 2000 1x Technology)
4
®
Bluetooth Wireless Technology (see Note)
Global Positioning (GPS) Technology
Personal Information Manager (PIM) Functions
Picture (MMS) Messaging
5
2
8
Text (SMS) Messaging
Built-in 2 Megapixel Digital Camera with Camcorder function
Voice Dial
Speakerphone
Features
1. Volume Key — In standby mode (with the flip open),
Note: The Samsung Jet Set™ supports the wireless handsfree profile and
the serial port profile for Bluetooth® wireless technology. The Jet Set
does not support Bluetooth OBEX profiles.
adjusts the voice call ringer volume, voice volume during a
call, and many option settings in Settings sub-menus.
With an incoming call, mutes the ringer.
9
In standby mode (with the flip closed), switches on the
backlight for the Front Display (shows the time and phone
status icons).
Open View of Your Phone
1
2. microSD™ Memory Card Slot — Lets you install additional
memory for storing pictures, videos, music files, and other
multimedia files.
2
3. Camera Lens — The lens of your phone’s built-in Camera.
4. Front Display — Shows time, date, and phone status
icons.
5. Music Player Keys — Lets you control music play with your
14
13
phone closed.
3
6. Headset Connector — Lets you connect wired headsets
and TTY devices (devices that allow people who are deaf
or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone).
4
5
6
12
11
7. Camera Key — Launches the Camera feature in your
10
phone.
8. Power/Accessory Connector — Lets you connect a
travel adaptor or optional accessories (such as, a Travel
Adapter or an optional Data Cable) to your phone.
9
8
7
Understanding Your Phone
10
Features
8. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
1. Earpiece/Speaker — Lets you hear the other caller,
ringtones, alerts, alarms, and music and videos.
9. Voice Recognition Key — In Idle mode, pressing and
holding this key launches VoiceSignal options.
2. Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators, signal strength, and so
on.
10. Alpha-numeric Keys — Use these keys to enter
numbers, letters, and characters.
11. END/Power/Menu Exit Key — Ends a call. If you press
and hold the END key, the power goes On or Off. When you
receive an incoming call, press to send the call to
voicemail.
3. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
4. OK Key — In standby mode, pressing this key launches
the Main Menu. In Menu mode, pressing this key accepts
the highlighted choice in a menu.
12. BACK Key — Deletes characters from the display when
you are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
5. SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
13. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
6. Voice Mail Hot Key — Pressing and holding this key calls
your Voice Mail account.
14. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
7. Special Function Keys — Enter special characters.
Performs various functions.
11
•
When the MENU/OK key function is EDIT, press the EDIT key ( ) to
edit a Draft message.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the Left soft key
CLR Key
(
) and the Right soft key (
).
The CLR key (
) is used to erase or clear numbers, text, or
to return to a
previous menu or to return to standby mode from any menu.
Left Soft Key
symbols from the display. You can also use
Some functions of the Left soft key are as follows.
1. If you enter an incorrect character, briefly press
to
•
In standby mode, press the Menu (left) soft key (
) to open the Main
backspace (and delete) the character.
Menu.
•
When the left soft key function is Edit, press Edit
Contact.
(
) to edit a
2. To erase the entire sentence, press and hold
.
3. To back up one menu level, briefly press
.
Right Soft Key
4. To return to standby mode, press and hold
until you
Some functions of the Right soft key are as follows.
return to standby mode.
•
•
•
In standby mode, press the Contacts (right) soft key (
Contacts Find list.
When the right soft key function is Options, press Options
pop-up menu appears.
) to open the
) and a
) to back up
END Key
(
1. Press the END key
2. Press and hold the END key
3. Briefly press once to disconnect a call.
4. Press to return to standby mode from any menu, or to
cancel the last input.
to turn your phone on.
to turn your phone off.
When the right soft key function is Back, press Back
one menu level.
(
OK Key
•
In a menu, press the OK key ( ) to accept the highlighted selection.
In camera mode, press the TAKE key ( ) to take a photo or to create
a Pic. message.
•
Understanding Your Phone
12
SEND Key
Understanding the Display Screen
1. The top line of your
phone’s main display
contains icons that
indicate network status,
battery power, signal
strength, connection type,
and more.
The SEND key (
) is used to answer calls, dial calls, and to
1
recall the last number(s) dialed, received, or missed.
1. Press once to answer calls.
2. Enter a number and briefly press
to make a call.
2
3. Briefly press
in standby mode to display a list of
recent calls to and from your phone.
4. Press
number.
5. Press
switch back to the other call.
twice in standby mode to call the most recent
2. The center portion of the
3
main display shows
to pick up a waiting call. Press
again to
information such as call progress information, messages,
and photos.
Navigation Key
3. The bottom line of the main display shows current soft key
Use the directional keys on the Navigation key (
browse menus, sub-menus, and lists. Each key also acts as a
shortcut to launch applications.
) to
functions.
The sample screen shows that pressing the Left soft key
(
) will open the Main Menu, and pressing the Right soft
Camera Key
key ( ) will show the Contacts Find screen.
Use the Camera key (
) — located on the right side of
your phone — to activate the camera built into your phone and to
take pictures.
13
Display Screen Icons
•
•
•
•
•
•
•
Choice
•
Reconfirm
Example: “Save message?”
Your Jet Set phone can show you definitions of the icons that
appear on the top lines of the front and main displays. To access
the Icon Glossary:
•
Example: “Erase message?”
Performing
ᮣ
In idle mode, press the Menu soft key, then select Settings
Phone Info Icon Glossary. A list shows of the icons
that can appear on the top lines of the displays.
•
Example: “Sending...” “Connecting...”
➔
➔
Completed
•
Example: “Message Saved”
Information
•
Error
External Display
Example: “New Voicemails”
Your phone has an external display on the
outside of the flip. When you close the
phone, the external display shows a digital or
analog clock. (For more information, refer to
•
Example: “System Error!”
Warning
Example: “Battery Low,” “Memory Full!”
•
Backlights
Icons that appear in the external display indicate the following:
Backlights illuminate the internal and external displays and the
keypad. When you press any key or open the phone, the
backlights come on. They go off when no keys are pressed within
a period of time set in the Backlight menu.
•
•
•
•
Incoming calls and messages
Alarms and alerts
Battery charge level
Signal strength
Dialogue Boxes
Note: During a phone call, the display backlights dim and turn off after 10
seconds to conserve battery power, regardless of the Backlight setting.
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low memory. Dialogue boxes and their
definitions are outlined below.
Understanding Your Phone
14
Lock Mode
Your Phone’s Modes
Call Answer Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
volume key. Unlock your phone by entering the lock code when
You can select how you wish to answer a call.
1. In standby mode, press the Menu
➔
Settings ➔ Call
Settings ➔ Call Answer. The following call answer
options appear in the display:
• Any Key — Pressing any key except
call.
• Send Key — Only pressing
• Flip Open — Opening the phone’s flip or pressing
call.
or
answers a
answers a
Standby Mode
answers a call.
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
•
•
After you power the phone on.
When you press after a call or from within a menu.
2. Select the desired method for answering calls.
Input Mode
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Input mode determines how you enter text, numbers and
symbols. While at any text entry screen, press the Left soft key
), then choose the input mode from the pop-up menu using
the navigation keys. Optional input modes are T9 Word Abc ABC
1. While in standby mode, enter a phone number, and press
(
to place a call.
,
,
,
2. Press
to return to standby mode.
Receive Messages in Standby Mode
Tip: You can also cycle between T9 Word
,
Abc
/
ABC, and 123 by repeatedly
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
pressing and holding the key until the phone beeps.
15
•
•
View Now — Lets you view the message now.
View Later — Lets you view the message at a later time.
side of the phone up or down. Options are:
• Ringer Off
• Vibrate
• Low
• Low/Medium
• Medium
• Medium/High
• High
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press Options ( ) to
display a list of menu options. (For more information, refer to
Enter/Exit Silent Mode
• Vibrate/High
2. When you are satisfied with the setting, press the
key.
Silence the tones your keypad makes when you press a key.
Your phone returns to standby mode.
•
In standby mode, press and hold
appears in the display and your phone returns to standby mode.
While in Silent mode and standby mode, press and hold Exit
Silent Mode briefly appears in the display and your phone returns to
standby mode.
.
Entering Silent Mode briefly
Tip: You can also enter the Volume/Voice Calls sub-menu by pressing the
•
.
Menu soft key, then selecting Settings
➔
Sound Settings
➔
Volume
➔
Voice Calls. Use the Volume key on the left side of your phone to adjust
the ringer setting.
Vibrate Mode
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The Vibrate plus Ring icon ( ) appears in the display
when the phone is in Vib+Ring mode.
ᮣ
In standby mode, repeatedly press the Volume key (
down until Vibrate appears in the display.
The Volume key is on the upper left side of phone, near the
Left soft key ( ).
)
Adjust the Ringer
1. In standby mode, press the Volume key (
) on the left
Understanding Your Phone
16
Camera Mode
Note: You can also enter Camcorder mode by doing one of the following:
1. Press the Menu soft key, then select Multimedia ➔ Camcorder.
2. Press the Multimedia shortcut (Down navigation key), then select
Camera mode lets you activate your phone’s camera to take
pictures. In Camera mode, you can also adjust the resolution and
appearance of your pictures. (For more information, refer to
Camcorder
.
•
Entering Camera Mode — In standby mode, press the Camera key
) on the upper right side of your phone.
•
Exiting Camcorder Mode — Press the
key.
(
Note: You can also enter Camera mode by doing one of the following:
1. Press the Menu soft key, then select Multimedia ➔ Camera.
2. Press the Multimedia shortcut (Down navigation key), then select
Camera
.
•
Exiting Camera Mode — Press the
key.
Camcorder Mode
Camcorder mode lets you activate your phone’s camcorder
function to record video clips. In Camcorder mode, you can also
adjust the resolution and appearance of your videos. (For more
•
Entering Camcorder Mode — In standby mode, press and hold the
Camera key ( ) on the upper right side of your phone.
17
Section 3: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using
the keypad.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
2. Press
to place the call.
Note: You can specify other numbers than 911 as emergency numbers using
Dialing Emergency Numbers
When you call an Emergency Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
Dialing International Numbers
1. In standby mode, press and hold
until the “+” symbol
appears in the display, or enter the three-digit exit code
(011) for the United States.
1. With the phone on, enter 911 using the keypad.
2. Enter the country code for the country that you are calling.
2. Press
to place the call.
3. Enter the number that you wish to call, then press
.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
Note: Puerto Rico and Canada are on the North American dialing plan. When
making calls to Puerto Rico and Canada it is similar to making calls
within the United States, no unique country codes are necessary.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Call Functions
18
Manual Pause Calling
Making a Call — Speed Dialing
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
dial) numbers for your contacts. (For more information, refer to
•
2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
Wait — A hard pause stops the calling sequence until you press the
key.
One-Touch Dialing
•
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
To manually call a number with pause(s) without storing it to your
Contacts:
1. Enter the number you wish to call.
Example: For Speed Dial number 003, press and hold
until the name
2. Press Options ( ). A pop-up menu containing the
and number appear in the display and the number is dialed.
following options appears in the display:
Two-Touch Dialing
•
•
2-Sec Pause — a two-second pause.
Wait — a hard pause (awaits input from you).
Memory locations 010 through 099 are special Two-Touch
dialing locations.
3. Select the type of pause to be added to your number
sequence.
Example: For Speed Dial number 013, briefly press
until the name and number appear in the display and the
number is dialed.
, then press and hold
4. Press
to call the number.
19
Three-Touch Dialing
to the first few letters of the Contact name, as shown.
Memory locations 100 through 999 are special Three-Touch
dialing locations.
2. Press the Up navigation key. The Contact List screen
appears showing the desired Contact name, as shown.
3. Press
to call the number.
Example: For Speed Dial number 113, briefly press
, briefly press
again, then press and hold
until the name and number appear
Making a Call — Voice Dialing
in the display and the number is dialed.
Your Jet Set mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains (two-second) 2-Sec Pause(s)
Using Voice Dial
simply wait for the pauses to pass and the dialing to complete.
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
•
If you speed dial a contact that contains (hard) Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any number stored in your
Contacts list by pressing the number keys that correspond to the
first few letters of a Contact name.
Voice Dialing Tips:
•
•
Wait for the beep before speaking.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
Quick Search Dialing a Contact
To dial a name, do the following:
To find and dial a Contact, do the following:
1. In standby mode, press the
key.
1. In standby mode, press the number keys that correspond
Call Functions
20
“Say a Command” appears in the display and is
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
pronounced through the earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
5. Say one of the following number types:
3. Speak clearly and say the name of a person in your
•
•
•
“
“
“
Home
Work
Mobile
”
”
”
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
Voice Dial dials the specified number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press the key.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
•
•
Press Repeat
Press Settings
dialing.
(
) to say the name again.
), then press Exit ) to exit Voice Dial without
3. Speak clearly and say the telephone number of the person
(
(
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
21
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
•
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Ringer Off Vibrate Low
Low/Medium Medium Medium/High High, or Vibrate/High
and/or different ring types to distinguish callers.)
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
,
,
,
,
,
,
,
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
•
•
If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
events occurs:
•
•
Press Repeat
Press Settings
dialing.
(
) to say the name again.
), then press Exit ) to exit Voice Dial without
•
•
•
•
You answer the call.
(
(
You ignore the call.
The calling party ends the call.
The call is sent to voicemail.
Pause Dialing From a Contacts Entry
If you voice dial a contact that contains (two-second) 2-Sec Pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
Answering an Incoming Call
ᮣ
Press the
key. The ring tone and/or vibration stop and
•
If you voice dial a contact that contains (hard) Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
the caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but
page 110.)
Answering a Call
Your phone notifies you of a call in the following ways:
Call Functions
22
2. Select the Recent Calls log that you wish to review or the
Ignoring a Call
function you wish to access:
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
Note: In cases where there is a Contacts match for a Recent Calls log entry,
the name associated with the number appears in the display instead of
the number.
ᮣ
During an incoming call, press Ignore
(
). The caller is
forwarded to your voice mail.
Adjusting the Call Volume
In standby mode, repeatedly press the volume key (
down until the Call Volume Level desired appears in the display.
The volume key is on the left side of phone.
Outgoing Calls
)
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Note: To quickly view your most recent calls, briefly press
in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
Review the Calls Log
1. In standby mode, press the Menu soft key, then select
Recent Calls. The following options appear in the display:
1. In standby mode, press the Menu soft key, then select
Recent Calls ➔ Outgoing Calls. A list of your outgoing
calls appears in the display.
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
• Data Counter
2. Highlight a call, then press Open
(
) to view further
information about the call.
3. Press Options ( ). A pop-up menu containing the
following options appears in the display:
23
•
•
Save — Save the number to your Contacts.
Incoming Calls
Details — Calls to Contacts Only — Shows the entry for the called
Contact.
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
•
•
•
•
Erase — Erase the selected call from your Outgoing call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Outgoing call log.
1. In standby mode, press the Menu soft key, then select
Recent Calls ➔ Incoming Calls. A list of your Incoming
calls appears in the display.
View Timers — Shows the number of calls and/or the total time
spent on the Last Call, Home Outgoing, Home Incoming, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
2. Highlight a call, then press Open
(
) to view further
4. Press Message (
). The following options appear in the
information about the call.
display:
3. Press Options ( ). A pop-up menu containing the
•
•
•
Text Message — Lets you send a text message to the selected
number called.
Picture Message — Lets you send a picture message to the
selected number called.
Video Message — Lets you send a video message to the
selected number called.
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
•
•
•
•
Erase — Erase the selected call from your Incoming calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Incoming calls log.
View Timers — Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Home Outgoing, Home Incoming,
Roaming Calls, Lifetime Calls.
5. Select an option to perform the option’s function.
Call Functions
24
4. Press Message (
). The following options appear in the
3. Press Options ( ). A pop-up menu containing the
display:
following options appears in the display:
•
•
•
Text Message — Lets you send a text message to the selected
calling number.
Picture Message — Lets you send a picture message to the
selected calling number.
Video Message — Lets you send a video message to the
selected number called.
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
Erase — Erase the selected call from your Missed call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Missed call log.
View Timers — Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Home Outgoing, Home Incoming,
Roaming Calls, Lifetime Calls.
•
•
•
•
4. Press Message (
). The following options appear in the
5. Select an option to perform its function.
display:
Missed Calls
•
•
•
Text Message — Lets you send a text message to the selected
called number.
Picture Message — Lets you send a picture message to the
selected called number.
Video Message — Lets you send a video message to the
selected number called.
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
1. In standby mode, press the Menu soft key, then select
select Recent Calls ➔ Missed Calls. A list of your missed
calls appears in the display.
2. Highlight a call, then press Open
(
) to view further
5. Select an option to perform its function.
information about the call.
25
All Calls
•
•
•
Text Message — Lets you send a text message to the selected
calling/called number.
Picture Message — Lets you send a picture message to the
selected calling/called number.
Video Message — Lets you send a video message to the
selected number called.
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1. In standby mode, press the Menu soft key, then select
Recent Calls ➔ All Calls. A list of all logged calls appears
in the display.
2. Highlight a call, then press Open
(
) to view further
5. Select an option to perform its function.
information about the call.
Call Timer
3. Press Options ( ). A pop-up menu containing the
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling/called Contact.
Note: Call Timer is not for billing purposes.
•
•
•
•
Erase — Erase the selected call from your Calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Calls log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Home Outgoing, Home Incoming,
Roaming Calls, Lifetime Calls.
1. In standby mode, press the Menu soft key, then select
Recent Calls ➔ Call Timer. The following options appear
in the display:
•
•
Last Call — View the duration of your last call.
Home Outgoing — View the duration of the total outgoing calls
made on your phone since the last erasure.
4. Press Message (
). The following options appear in the
•
Home Incoming — View the duration of the total incoming calls
received on your phone since the last erasure.
display:
Call Functions
26
•
•
Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
Recent Calls ➔ Data Counter. The following options
appear in the display:
All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
Last Reset — View the time and date all timers were last reset.
Lifetime Calls — View the duration of all calls since your phone
was activated.
•
•
•
Transmited — View the total amount of data transmitted by your
phone since the last reset.
Received — View the total amount of data received by your phone
since the last reset.
Total — View the total amount of data sent or received by your
phone since the last reset.
•
•
2. Press the Reset (
) to reset a selected counter except
Last Reset and Lifetime Calls.
•
•
Last Reset — View the time and date all timers were last reset.
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
3. Press the Reset All ( ) to reset all counters except
Lifetime Calls.
2. Press the Reset (
) to reset a selected counter except
4. Press
or
if you wish to exit the list.
Last Reset and Lifetime Data Counter.
Note: Although Total call timers can be erased, the Lifetime call timer can
3. Press the Reset All ( ) to reset all counters except
never be erased.
Lifetime Data Counter.
Data Counter
4. Press
or
if you wish to exit the list.
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note: Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.
Note: Data Counter is not for billing purposes.
1. In standby mode, press the Menu soft key, then select
27
Roaming
What is Roaming?
Roaming lets you use your Jet Set phone when you travel outside
of your Wireless Provider’s coverage area. The Roaming icon
(
) appears in the top line of the display when Roaming is
active, and extra charges may apply when making or receiving
calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
•
Home Only — Your phone is available for normal operation only in the
designated coverage area.
•
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Call Functions
28
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of the menus available with your phone.
Messages
Multimedia
Menu Navigation
Access menus using the Menu soft key, the Navigation key, the
Browser
Games & Apps
soft keys (
), or a shortcut.
1. In standby mode, press the Menu soft key. The Main Menu
appears in the display.
The In-Use Options
2. Use the Navigation key to browse phone menus.
Access numerous menus and features even while in a call.
3. Press
to access a menu or sub-menu highlighted in
Note: If the call is disconnected while accessing the In-Use Option, the In-
Use Option disappears from the display and the phone eventually
returns to standby mode.
the display.
Return to the Previous Menu
1. While in a call, press Options ( ). The following menu
Press
or Back ( ) to return to the previous menu.
items appear in the display:
Navigation Key Shortcuts
• Contacts — The Contacts Find screen appears in the display.
• Call History — The Recent Calls menu appears in the display.
In standby mode, press a navigation key (as illustrated below) to
launch its corresponding application.
•
Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
29
•
Connect Bluetooth — Connect with a Bluetooth headset or
1. In standby mode, press the Menu soft key. The main menu
other Bluetooth device.
appears in the display.
2. Select a menu or feature to open the menu or to activate
2. Press the number of the menu, sub menu, and so on to
the feature.
arrive at the desired feature.
3. To exit this menu, press
4. To conduct this call hands-free, enable Speakerphone
.
Example: To launch the Tip Calculator from standby mode, press the Menu
soft key and
.
(
Using Quick Search
5. To disable the microphone on your phone, press the Mute
You can also access menus, sub-menus, and menu items by
name.
soft key.
Navigate Using Shortcuts
Using Menu Item Number Shortcuts
1. In standby mode and using the alpha-numeric keys, enter
the first few characters of the name to the desired menu,
sub-menu, or menu item.
You can also access menus and sub-menus using menu item
numbers. This method is often called a “shortcut.” To shortcut to
a menu or sub menu, press the Menu soft key, then enter the
menu and/or sub menu number(s) for the feature in question.
2. Press the Down navigation key. The Menu List screen
appears in the display listing the menu(s), sub-menu(s),
and menu item(s) with matching names.
3. Select the menu option you wish to access.
Menu Navigation
30
Section 5: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering
text.
Your current mode of text entry [Abc, 123, or T9 Word] is
indicated in the lower left part of the display when composing a
text message.
Changing the Text Entry Mode
1. While composing a text message, press the Left soft key
Text Entry Modes
(
). A pop-up menu containing the following options
You can compose text messages using alphabetical characters,
symbols, and numbers. Each method of character entry (symbol,
number, and so on) is called a text entry mode. There are four
text entry modes, as indicated:
appears in the display:
•
•
•
•
•
T9 Word
Abc
ABC
123
Symbols
•
Alpha—Alphabetical text entry mode. Options are:
–
–
–
ABC — All upper case
Abc — Initial capital
abc — All lower case
Abc is highlighted. Select any of the other four text entry
modes. Uses of the text entry modes are explained in
•
Symbols — Symbol entry mode. Enter symbols into your message by
pressing the corresponding number that appears above it in the
display.
Entering Text in Alpha (Abc) Mode
1. Enter characters while in Alpha (Abc) mode by pressing
the key with the desired characters (such as, pressing
once for “G”).
•
•
123 — Number entry. Enter numbers by pressing the corresponding
key on the keypad.
T9 Word — Predictive text mode. Press each key only once to enter
the letter of the word that you’re spelling.
31
2. Press the key repeatedly until the desired character
2. When you have completed pressing all the keys for the
desired word, review the word appearing in the text entry
field.
appears in the display (such as, pressing
for “H”).
two times
3. Pause briefly and the displayed character is accepted and
3. If the word in the text entry field is not the one you meant
inserted into your message.
to enter, repeatedly press
appears.
until the word you want
4. Press
to enter a space.
Entering Text in T9 Word Mode
Example: When you press the key sequence
, the word “And”
appears on the screen. Suppose the word you want is “Cod”. Just
T9 Word recognizes commonly used words for a sequence of
keypresses and inserts the word into your message. Using T9
mode is much faster than the more traditional method Alpha
mode, since T9 requires only one key press per letter of the word
that you are spelling.
repeatedly press
until “Cod” is highlighted in the display.
4. Press
to accept the highlighted word.
For practice, enter the word ‘Samsung’ into your message
by pressing each of the following keys only once:
changing text entry modes.
1. While in T9 Word mode, press each key that corresponds
S
a
m
s
u
n
g
to a desired letter, in sequence, one time.
T9 Word recognizes that the most commonly used word
Example: If you press the key sequence
, the word “Bad” is
for the sequence of keys you just pressed is “Samsung.”
likely to appear in the text entry field.
Entering Text
32
Tip: To enter words not likely to be in the T9 Word dictionary, such as
uncommon abbreviations or slang, try changing the text entry mode
from T9 Word to Abc or ABC.
changing text entry modes.
ᮣ
While in 123 mode, press the key containing the
corresponding number that you wish to insert into your
message.
Entering Upper and Lower Case Letters
In Abc and T9 Word modes, you can select to enter only upper
case letters (ABC/T9 WORD), only lower case letters (abc/T9
word), or a mix of the two (Abc/T9 Word).
Entering Symbols
Symbol mode enables you to enter symbols such as @ or % in a
1. While in T9 Word or Abc mode, repeatedly press
to
text message.
change the capitalization setting.
1. In standby mode, press Messages shortcut (Up navigation
key) ➔ Send Message ➔ Text Message to compose a
new text message.
The left soft key label changes to indicate the current
capitalization setting.
For example, if the left soft key label is ABC, and you want
2. Enter the phone number of the recipient, then press
3. Press the Left soft key ( ). A pop-up menu containing
the following options appears in the display:
.
to enter the word “BALL”, press
until the left soft key
label changes to abc, then enter the word “ball”.
Tip: To enter a capital letter within a word, such as “SimTam”, change the
capitalization setting to Abc at the beginning of the word and before
entering the “T”. The capitalization setting will automatically change to
abc after you enter each upper case letter.
•
•
•
•
•
T9 Word
Abc
ABC
123
Symbols
Entering Numbers
4. Select Symbols. The first of three screens of symbols
Enter numbers into a text message while in number mode (123).
appears in the display.
33
5. Use Prev (
symbols, if necessary.
6. Press the key that corresponds with the symbol that you
) and Next ( ) to page through the other
wish to enter. For example, press
point (!).
for an exclamation
Note: Select a symbol to enter it into your message.
7. Repeat steps 3 through 6 to insert as many symbols into
your message as desired.
Entering Text
34
Section 6: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
•
•
•
Speed Dial — Assign speed dial numbers to your Contacts.
Group — Rename one of your five Contacts groups.
Memory Info — View available memory for dial entries.
2. Select the Contacts sub-menu or option of your choice.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
Tip: You can also access a sub-menu or menu option by pressing the
number key corresponds to the menu item number. For example, press
to select Add New Entry.
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
Adding a New Contacts Entry
You can add an new entry to your Contacts list or add information
to an existing entry.
Using the Contacts Add Option
1. In standby mode, press the Menu soft key, then select
Contacts ➔ Add New Entry. The Add New Entry screen
appears in the display with the Name field highlighted.
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call
Open Your Contacts List
2. Enter a name or phrase to associate with the type using
1. In standby mode, press the Menu soft key, then select
Contacts. The following Contacts sub-menus and options
appear in the display:
3. Use the Up/Down navigation keys to highlight each field.
•
•
Find — Find a phone number by entering a Contact name.
Add New Entry — Add a number or e-mail to your Contacts.
35
4. Enter a phone number (Mobile, Home, or Work,) or an e-
Note: If the call was incoming and Caller ID information was unavailable,
mail address (E-Mail) for the new Contacts entry.
then the Save option is also unavailable.
5. If desired, assign the new Contact to a Group. This lets you
send messages to and find this Contact and other related
1. After you press
to end your call, the call time, length
of call, phone number, and name of the other party (if
available) appear in the display.
2. Press Save ( ). The Save screen appears in the display
6. If desired, select a unique Ringtone to identify this new
showing the following options:
•
•
Create New — Lets you create a new Contacts entry.
Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
7. If desired, enter an additional phone number (Pager or
Fax) for the new Contacts entry.
Tip: You can also store a phone number from standby mode by entering the
number, and pressing Save ( ).
8. If desired, choose an identifying image by highlighting the
photo ID field and pressing the Set soft key. The My
Creating a new Contacts entry:
3. Select Create New. The following (number type) icons
appear in the display:
9. Press SAVE ( ) to save the new Contacts entry.
Mobile
Work
Pager
Fax
Home
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
Understanding Your Contacts
36
4. Select the number type that matches your new entry. The
Add New Entry screen appears in the display with the
number being save populating the selected number type
field. (For more information on creating a new Contacts
9. Make any added changes you wish to the Contacts entry.
10. Press SAVE ( ) to save the entry.
Storing Number from a Calls Log
Adding the number to an existing Contacts entry:
You can store numbers from the Calls logs to your Contacts.
1. In standby mode, press the Menu soft key, then select
Recent Calls. The following Calls logs appear in the display:
5. Select Update Existing. The Update Existing screen
appears in the display showing your current Contacts list.
6. Enter the first few charaters of the Contacts entry name
under which you will store the saved number. (For more
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
7. Select the desired Contacts entry. The following (number
• Data Counter
A list of your calls appears in the display.
type) icons appear in the Update Existing screen:
2. Highlight the number you wish to store in Contacts
.
Mobile
Work
Pager
Fax
Home
3. Press Options ( ). The following options appear in the
display:
•
•
Save — Saves the selected number to your Contacts list.
Details — Calls to Contacts Only — Shows the entry for the called
Contact.
8. Select the appropriate unassigned number type. The Edit
Contact screen appears in the display.
•
Erase — Deletes the selected number from the selected Calls log.
37
•
Lock
/
Unlock — Prevents/allows deletion of the selected
“Say a Command” appears in the display and is
number.
pronounced through the speaker.
•
•
Erase All — Deletes all numbers from the selected Calls log.
View Timer — Shows the call times for the Last Call, Home
Outgoing, Home Incoming, Roaming Calls, All Calls, Last Reset,
and Lifetime Calls timers for the selected Calls log.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want
4. Select Save. The following options appear in the display:
to call, exactly as it is entered in your contact list.
•
•
Create New — Lets you create a new Contacts entry.
Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Finding a Contacts Entry
Voice Method
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
•
•
To say the name again, press Repeat
To exit VoiceSignal without dialing, press
(
).
or
.
Note: The Contacts command shows the requested contact information in
5. The contact information for the name you selected appears
the display but does not dial any phone numbers for the contact.
in the display.
To look up information for a specific contact:
1. In standby mode, press and hold
to launch
VoiceSignal.
Understanding Your Contacts
38
Keypad Methods
3. When the desired Contacts entry is listed in the display,
highlight it. Then, do one of the following:
Find by Name
•
Highlight a number listed for the named Contact, then press
dial the highlighted number.
to
If you have stored a named contact in your Contacts list, Find and
Quick Search let you locate the entry quickly.
•
•
•
Press Edit
Press VIEW
Press Options
(
) to change the information about the Contact.
to show information about the Contact.
). The following options appear in the display:
1. In standby mode, do one of the following:
(
)
•
•
Press Contacts
Press the Menu soft key, then select Contacts
(
).
(
➔
Find.
–
New Contact — Lets you add a new number to your Contacts list or to
the selected contact.
The Find screen appears in the display with an alphabetical
–
–
Erase — Lets you delete the highlighted contact.
list of Contacts showing.
Send Text Msg — Lets you send a text message to the selected
contact.
Tip: If you have Quick Search enabled, from standby mode, you can press
number keys that correspond to the first few letters of a Contact name,
press the Up navigation key, then skip to Step 3. (For more information,
–
–
Send PIC Msg — Lets you send a picture message to the selected
contact.
Send Video Msg — Lets you send a video message to the selected
contact.
2. Enter the first few characters of the name of the contact as
–
–
Call — Lets you place a call to the highlighted contact.
it appears in your Contacts list.
Send Name Card With Bluetooth — Lets you send a copy of the
highlighted contact another Bluetooth device.
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.
4. Select the desired option to enter its sub-menu.
Group
Note: As you enter letters, the entry names of the closest matches (thus far)
This option lets you find a Contacts list entry with a specific
Group name.
appear in the display.
1. In standby mode, press the Menu soft key, then select
39
Contacts
➔
Group. The Group List screen appears in the
Contacts list entry you wish to find (such as the area code
or area code and exchange — for example, 888-987).
display.
2. Select the Group you wish to browse. The selected Group
2. Press Options
➔
Search. The Find screen appears in the
list appears in the display.
display listing all phone numbers in your Contacts list that
contain the entered digits.
3. Highlight the desired Contacts entry, then do one of the
following:
3. Highlight the desired Contacts entry, then do one of the
following:
•
•
•
Press the Remove soft key to delete the selected contact from the
Group. (Does not apply to No Group.)
Press to ADD an existing contact entry to the selected Group.
(Does not apply to the General group.)
Press the Options soft key. The following options appear in the
display:
•
•
Press
to dial the highlighted number.
Press to display information about the Contacts entry
associated with the highlighted number. From the View Contact
screen, you can erase or edit the selected Contacts entry.
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
–
–
–
Send Text Msg — Lets you send a text message to the selected
contact.
Send PIC Msg — Lets you send a picture message to the selected
contact.
Send Video Msg — Lets you send a video message to the selected
contact.
Select an option to enter its sub-menu.
Search by Number
2. Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
This option lets you find a Contacts list entry by one of its phone
numbers.
3. Highlight a number stored in this contact entry, then do
1. In standby mode, enter the first few numbers of the
one of the following:
Understanding Your Contacts
40
•
•
Press
to delete one or more numbers.
to clear all numbers in the highlighted field.
Note: Keep in mind that pauses count as digits towards the 32-digit
Press and hold
maximum.
Note: You can also add numbers (such as a Pager number or a Fax number)
Store Pauses in a New Contacts Entry
to the entry, assign it to a Group, and add other information.
1. In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
4. When you’re finished editing the entry, press
. Your
changes are saved and a confirmation message appears in
the display.
2. Press the Options soft key. The following pause options
appear in the display:
Adding Pauses to Contacts Numbers
•
•
2-Sec Pause — Adds a two-second pause.
Wait — Adds a hard pause (awaits input from you).
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
3. Select the pause option of your choice to add it to your
number sequence.
4. When you’re finished entering the number and pauses,
press the Save soft key to store the number in your
Contacts.
•
2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
Wait — A hard pause stops the calling sequence until further input
from you.
•
Add Pauses to an Existing Contacts Entry
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
2. Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
41
3. Highlight a number stored in this contact entry.
2. Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
4. Use the Navigation key to move the cursor to where you
want to add a pause (such as, at the right-hand end of the
number).
3. Highlight a number stored in this contact entry.
Note: If a contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you Speed Dial that Contact.
5. Press the Options soft key. The following pause options
appear in the display:
4. Press the Options soft key, then select Set Speed Dial.
•
•
Wait — a hard pause (awaits input from you).
2-Sec Pause — a two-second pause.
The SPEED DIALS screen appears in the display.
6. Select a pause option to add it to your number sequence.
5. Enter or highlight an unassigned Speed Dial number.
7. When you’re finished entering pauses, press
to save
6. Press
to assign the new Speed Dial number to the
your changes to the number in your Contacts.
selected Contact. You are prompted to confirm the
assignment.
Assigning Speed Dial Numbers
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options pop-
up menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact’s Speed Dial
number.
7. Press the Yes soft key to assign the selected Speed Dial
number. The Edit Contact screen appears in the display.
8. Press
to save the new Speed Dial number assignment.
Add a Number or E-Mail Address to an Existing Entry
Understanding Your Contacts
42
–
–
–
Select Symbols
.
2. Press the Edit soft key. The Edit Contact screen appears
Select the symbol.
@
in the display with the contact name highlighted.
Enter the remainder of the e-mail address using the keypad. (For more
3. Highlight a number field or e-mail field in this contact
entry.
•
To add the domain type to the end of the e-mail address, do the
following:
4. Enter the phone number or e-mail address for the new
–
Press abc
highlighted.
Select Shortcuts
Select the desired shortcut (such as,
to save your changes.
(
). A pop-up menu appears in the display with Abc
Contacts entry.
–
–
.
5. Press
to add the number or e-mail address to the
@,
.com, .net, or .edu).
existing entry.
5. Press
Edit an Existing e-mail Address
Speed Dial Numbers
You can assign and change Speed Dial numbers for Contacts
entries.
1. In standby mode, press the Menu soft key, then select
2. Press the Edit soft key. The Edit Contact screen appears
Contacts
➔
Speed Dial. The SPEED DIALS list appears in the
in the display with the contact name highlighted.
display.
3. Highlight the E-Mail field (labeled with the @ symbol).
Tip: You can also assign a Speed Dial number when creating or editing a
•
To insert the @ symbol, do the following:
2. Enter a Speed Dial number in the Go To field or highlight a
–
Press the abc
(
). A pop-up menu appears in the display with Abc
Speed Dial number.
highlighted.
43
3. Press SET ( ). The Set Speed Dial screen appears in
2. Highlight the group (other than No Group) that you wish to
rename, then press the Options soft key. The following
options appear in the display:
the display.
4. Enter a Contact name or highlight a Contact entry.
•
•
•
Send Text Msg — Lets you send a text message to all contacts in
the selected Group.
Send PIC Msg — Lets you send a picture message to all contacts
in the selected Group.
Send Video Msg — Lets you send a video message to all
contacts in the selected Group.
5. Press
. You are prompted to confirm the new Speed
Dial setting.
6. To save the new setting, press the Yes soft key. To discard
the new setting, press the No soft key.
•
•
Rename — Lets you change the name of the selected Group.
Erase — Lets you delete the selected Group (this does not delete
the related Contacts).
Renaming a Contacts Group
Use this option to rename a group in your Contacts list.
1. In standby mode, press the Menu soft key, then select
•
Add — Lets you add a new Group.
Contacts
➔
Group. A list of group names (like the following
3. Select Rename. The Rename Group screen appears in
the display. The current name of the selected group shows
with a flashing cursor at the end of the name.
list) appears in the display:
•
•
•
•
•
No Group
Business
Colleague
Family
Friends
5. Press
to save the changed group name.
Note: You cannot rename No Group.
Deleting a Contacts Entry
Understanding Your Contacts
44
2. Press the Options soft key, then select Erase. The phone
prompts you to confirm the erasure.
3. To erase the selected Contacts entry, press the Yes soft
key. To retain the Contacts entry, press the No soft key.
Memory Info
Use the Memory sub-menu to view the amount of Contacts
entries you have stored, as well as the remaining memory.
ᮣ
In standby mode, press the Menu soft key, then select
Contacts Memory Info. The amounts of memory used
and remaining for Contacts entries appear in the display.
➔
45
Section 7: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
•
To select a mobile number or e-mail address using your Contacts
list, press the Add soft key. The following options appear in the
display:
–
–
–
Contacts
Groups
Accessing Your Messages
ᮣ
To access the Messages menu from standby mode, do
Recent Calls
one of the following:
Select Contacts. The Add Contacts screen appears in the display.
on finding a contact.)
Use the Up and Down navigation keys to highlight a contact. Use the
Left and Right navigation keys to select a phone Number or E-mail
•
•
Press the Messages shortcut (Up navigation) key.
Press the Menu soft key, then select Messages
.
The Messages menu appears in the display.
address for the highlighted Contact. Press Mark
(
)
to mark your
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text messages, picture messages, and video messages.
selection.
To add the selected contacts to the To list, press the Done soft key. The
Create Text Msg screen appears in the display.
•
To enter recipient e-mail address(es), press and hold
to change
Creating and Sending a Text Message
1. From the Messages menu, select Send Message
➔
Text
Message. The Create Text Msg screen appears in the
3. When you are finished addressing your message, press OK
). The Text field appears in the display.
display showing the To list.
(
2. Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s):
Messaging
46
•
•
To change the text input method, do one of the following:
2. Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s).
–
Repeatedly press and hold
until the desired text input method is
indicated by the left soft key label.
–
Press the Left soft key, use the navigation keys to select the desired text
input method, and press
page 46 for more information on addressing your
message.)
.
Press the Left soft key to select one of the following text entry
methods:
–
–
–
–
–
T9 Word
Abc
3. After addressing your picture message, press OK
(
).
The Subject field becomes highlighted.
ABC
123
4. Enter the Subject text using the keypad.
Symbols
page 46 for more information on choosing a text entry
information on using text entry methods.)
5. At any point while composing a message, you can set
message send options by pressing the Options soft key.
5. Press the Down navigation key. The Text field becomes
6. Once you’re finished composing your message, press
highlighted.
Send ( ) to send your message.
6. Enter the message text using the keypad.
Creating and Sending a Picture Message
1. From the Messages menu, select Send Message ➔ Picture
Message. The Create Pic Msg screen appears in the
display with the first To field highlighted.
page 46 for more information on choosing a text entry
information on using text entry methods.)
47
7. To set message send options, press the Options soft key.
11. Select Record New to record a new sound file, or use the
navigation keys to select a listed sound file.
•
If you select the Record New option, the Record New screen
appears in the display. Press Rec ( ) to begin recording.
8. To add a picture to the message, highlight the Picture
•
Wait for the beep, then start speaking. As it is recording the phone
displays a countdown timer that shows the seconds remaining for
the recording.
field.
•
Press the Images soft key to access the picture gallery. If there are
no pictures in the gallery, press the Camera soft key to launch the
camera, then take a picture. If there are pictures in the gallery,
thumbnail pictures appear in the display. Then, do the following:
–
To pause the memo, press the Pause soft key. When a memo is
paused, press the Resume soft key to continue recording.
•
•
Press Save
(
) to stop recording. The Record New option and a
–
–
Highlight a picture in the gallery.
list of sound files appear in the display with the Record New
option highlighted.
Press the View soft key to expand the highlighted picture to fill the
display.
Select your new sound file. The Create Pic Msg screen appears
in the display with your selected sound file in the Sound field.
–
Press the Camera soft key to activate the phone’s camera and take a
12. Once you’re finished composing your picture message, do
one of the following:
•
•
•
Press Send
(
)
to send the message.
9. Once you have selected a photo, press OK
(
). The
page 50.)
Create Pic Msg screen appears in the display with the
selected photo in the Picture field.
Creating and Sending a Video Message
1. From the Messages menu, select Send Message ➔
Video Message. The Create Video Msg screen appears in
the display with the To field highlighted.
The Sound field becomes highlighted.
10. Press the Sounds soft key. The My Sounds screen
appears in the display.
Messaging
48
2. Address your message by selecting contacts and/or
entering number(s) or email address(es) of message
recipient(s), and press OK ( ).
7. To set message send options, press the Options soft key.
information.)
page 46 for more information on addressing your
message.)
8. To add a video to the message, use the highlight the Video
field.
•
Press the Videos soft key to access the video gallery. If there are no
videos in the gallery, press the Video soft key to launch the
camcorder, then take a video. If there are videos in the gallery,
thumbnail videos appear in the display. Then, do the following:
3. After addressing your picture message, the Subject field
becomes highlighted.
–
–
–
Highlight a video in the gallery.
4. Enter the Subject text using the keypad.
Press the Play soft key to expand and review the video.
page 46 for more information on choosing a text entry
information on using text entry methods.)
Press the Video soft key to activate the phone’s camcorder and take a
information.)
•
page 50 for more information.)
5. Press the Down navigation key. The Text field becomes
9. Once you have selected a video, press OK
(
). The
highlighted.
Create Video Msg screen appears in the display with the
6. Enter the message text using the keypad.
selected video in the Video field.
page 46 for more information on choosing a text entry
information on using text entry methods.)
10. Once you’re finished composing your video message, do
one of the following:
•
Press Send
(
)
to send the message.
49
•
•
•
Validity Period — Lets you set a Date and Time when this
message will no longer be available to the recipient. After the set
period of time, your message is recalled.
Deliver Ack — Set to On to be alerted when your message is
received by the addressee.
Message Send Options
You can set priority, validity, and other options before you send a
message.
•
•
Remove Pic — Removes the picture from a Picture message.
Remove Sound — Removes the sound file from a Picture
message.
1. After you’ve composed a text or picture message, press
the Options soft key. The following are Send Options that
can appear in the display (which options appear depends
on what type of message you composed and what
message field you have highlighted):
•
•
Remove Video — Removes the video clip from a Video message.
Add To Contacts — Lets you add the addressee numbers or E-
mail addresses to your Contacts list.
•
Delivery — Lets you set Message Receipt (On
/
Off), message
Priority (Urgent
/Normal), and whether to include your Callback
• Edit Send To — Lets you change or add addressees for this
Number or Signature in a message.
message.
•
Cancel Msg — Exists your message and prompts you to save it.
•
•
Preview — Lets you view a Picture or Video message as the
recipient will see it.
2. Use the Navigation key to display the various Send
Options for each menu item.
Add Preset Msg — Lets you add pre-composed text to a
message.
3. When the desired send option is highlighted, press OK
•
•
Save As Draft — Saves this message in the Drafts folder.
(
) to confirm the selection or to enter the send option’s
Save As Preset — Saves the text of this message as a Preset
Message.
sub-menu.
•
Priority Level — Lets you assign a Urgent
,
Normal, or Low
priority to the message.
Messaging
50
•
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Receiving New Messages
When you receive a message in standby mode, an alert sounds
Select the desired option.
(unless turned off) and a New Message notification appears in
the display along with the closed envelope icon (
).
Voicemail
The date and time of the message and the following options also
appear in the display:
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
•
View Now — Opens the message where you have the option to Play
Again, Forward, Reply With Copy, Save PIC, Save Sound, Save Video,
Save Preset Msg, Lock/Unlock, Add To Contacts, Callback# or
Message Info.
Voicemail Setup
Before callers can leave voice mail messages, you must first set
•
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Select the desired option.
Checking Your Voicemail
Receive Messages While in a Call
1. In standby mode, press and hold
until you’re
When you receive a message while in a call, a New Message
notification appears in the display along with the closed envelope
icon (
connected to the voice mail system. A recorded message
prompts you for a password.
). The date and time of the message and the following
options also appear in the display:
2. Enter your password, then follow the recorded prompts, to
listen to your voice message, change administrative
options, and so on.
•
View Now — Opens the message where you have the option to Play
Again, Forward, Reply With Copy, Save PIC, Save Sound, Save Video,
Save Preset Msg, Lock/Unlock, Add To Contacts, Callback# or
Message Info.
Tip: You can also access your Voicemail by using the entries in the Voicemail
51
Select the desired option.
Press to return to the Messages menu.
3. While viewing a selected message, do one of the following:
Message Folders
Inbox
•
Received messages of all types (except Voice Mail) are stored in
the Inbox.
•
•
Press the Erase soft key to delete the message.
) to compose and send a message to the sender
of the highlighted message.
Press Reply
(
1. From the Messages menu, select Inbox, to open the
Inbox folder.
•
Press the Options soft key, The following options appear in the
display:
2. Highlight a message, then do one of the following:
–
–
–
–
–
–
Play Again — Picture Messages only — Replay a sound file included
with a Picture message.
•
•
Press the Erase soft key to delete the message.
Press Open
Step 3.
(
) to view the highlighted message, then proceed to
Forward — Lets you forward the message to other e-mail addresses
or mobile phone numbers.
•
Press the Options soft key. The following options appear in the
display:
Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
–
–
Reply — Lets you reply to a message.
Save Preset Msg — Saves the message text as a Preset Message
entry.
Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
Save Pic — Picture Messages only — Saves a copy of the image
included in the selected message to the My Images gallery.
–
Forward — Lets you forward the message to other e-mail addresses
or mobile phone numbers.
Save Sound — Picture Messages only — Saves the sound file in the
message to the My Sounds gallery.
–
–
Lock Unlock — Blocks or allows erasure of the selected message.
/
Add To Contacts — Lets you add the addressee numbers or e-mail
–
–
Lock Unlock — Block or allow changes to the selected message.
/
addresses to your Contacts list.
Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
–
–
Erase Inbox — Deletes all messages from the Inbox folder.
Message Info — Lets you display status information about a
–
Message Info — Lets you display status information about a
message.
message.
Messaging
52
–
Extract — Text Message only — Lets you call the originator of a
message.
•
Press the Options soft key. The following options appear in the
display:
Select the desired option.
Press to return to the Inbox list.
–
–
–
Forward — Send the message to another addressee.
•
Resend — Re-send the message.
Messages and Lock Mode
Lock Unlock — Block a message from being erased or free a
/
message to be erased.
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
–
Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
–
–
Erase Outbox — Erase all messages in the Outbox folder.
Message Info — Lets you display status information about picture
messages.
Outbox
Select the desired option.
Press the key to return to the Messages menu.
3. While viewing a selected message, do one of the following:
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
•
•
•
•
Press the Erase soft key to delete the message.
Press Resend ) to resend a message to the original addressee.
Tip: Verify whether and when a message or e-mail was successfully
(
Press the Options soft key. The following options appear in the
display:
1. From the Messages menu, select Outbox. A list of your
–
Play Again — Picture Messages only — Replay a sound file included
outgoing messages appears in the display.
with a Picture message.
2. Highlight a message, then do one of the following:
–
–
Forward — Send the message to another addressee.
Erase — Picture Messages only — Erase this messages from the
Outbox folder.
•
•
Press the Erase soft key to delete the message.
Press Open
(
) to view the highlighted message, then proceed to
–
Lock
/
Unlock — Block a message from being erased or free a
Step 3.
message to be erased.
53
–
–
–
–
Save Preset Msg — Save the message text as a new Preset
Message.
–
–
Lock Unlock — Block a message from being erased or free a
message to be erased.
/
Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
Add To Contacts — Lets you add the addressee numbers or e-mail
addresses to your Contacts list.
Message Info — Lets you display status information about picture
messages.
–
–
Save Preset Msg — Save the message text in the Preset Msg folder.
Erase Drafts — Erase all messages in the Drafts folder.
Extract — Lets you call the recipient of the message.
Select the desired option.
Press to return to the Messages menu.
Select the desired option.
Press to return to the Outbox list.
•
•
3. If you press Edit ( ), in the To screen/field, do one of the
Drafts Folder
following:
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
•
•
Press OK
(
) to accept the current recipient information.
Change or add recipient information, then press ( ).
1. From the Messages menu, select Drafts. A list of your
draft messages appears in the display.
2. Highlight the message that you wish to edit, then do one of
the following:
•
•
Press the Erase soft key to delete the message.
Press Edit
(
) to view the highlighted message, then proceed to
Step 3.
•
Press the Options soft key. The following options appear in the
display:
–
Send — Send the message to the current addressee(s).
Messaging
54
4. In the Text screen/field, do one of the following:
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
•
Press the Left soft key. The following options appear in the display:
1. From the Messages menu, select Voicemail. A Voicemail
status screen indicating the number of new messages in
your voice mailbox, their urgency, and any callback
numbers appears in the display.
–
–
T9 Word — Predictive, single key press per letter text entry mode.
Abc — Alphabetical, multiple key press text entry mode. The first letter
is capitalized.
–
–
–
ABC — Alphabetical, multiple key press text entry mode. All letters are
capitalized.
2. Press
to call your voice mailbox and listen to your
123 — Enter numbers by pressing the corresponding key on the
keypad.
voice messages.
Symbols — Enter symbols into your message by pressing the
corresponding number that appears above it in the display.
Note: You can, in standby mode, also press and hold
to dial your voice
mailbox.
Select the desired option.
Press Send ) to send the message.
•
•
(
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
page 50 for more information.)
5. Once you’re finished composing your message, do one of
the following:
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messages
menu, open the message folder where the message to be deleted is
stored, then select and delete the message from the Option menu
while viewing the message content.
•
•
Press Send
Press to exit the message. You are prompted to save your
changed message to the Drafts folder.
(
) to send the message.
Voicemail
1. From the Messages menu, select Erase Messages. The
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
following options appear in the display:
•
Inbox — Lets you delete all messages from your Inbox.
55
•
•
•
Outbox — Lets you delete all messages from your Outbox.
• Auto Erase — Automatically erase the oldest read message after
memory is full.
Drafts — Lets you delete all draft messages from the Drafts folder.
• Auto View — Automatically displays the message.
All Messages — Lets you delete all messages from all message
folders.
• Entry Mode — Lets you set the default text entry mode [T9 Word,
Abc/ABC (alphabetical), or 123 (numerical)] for composing
message text.
2. Select the folder containing the messages that you wish to
delete. You are prompted to confirm the erasure of all
messages in the folder.
• CB# — Lets you disable, enable, and update the callback number
that can be inserted in outgoing messages.
• VM# — Lets you update your Voicemail access number.
3. To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.
• Signature — Lets you disable, enable, and update the text
signature that can be inserted in outgoing messages.
• Preset Msgs — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
Message Settings
• Auto Scroll — When set to On, the phone automatically scrolls
message text, letting you see the complete message text without
using the Navigation key.
The Msg Settings menu lets you define numerous message
settings such as notification types and save options.
1. From the Messages menu, select Msg Settings. The
• Messaging Font Size — Lets you set the messaging font size.
following Msg Settings options appear in the display:
2. Select the desired option and setting.
• Notification — Lets you choose whether to be notified of a new
message by the appearance of an on-screen message and the new
message icon or by the Icon Only.
• Auto Save — Lets you set whether to automatically save to the
Outbox folder, to discard, or to prompt you to save unsent
messages when you exit them.
Messaging
56
Section 8: Browser
This section outlines how to launch Browser, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
•
Press the Menu soft key, then select Browser
➔
Go to Web.
Note: The first time you launch Browser, the warning message “Browse &
Download use airtime.” pops up in your display. To have this
message repeat the next time you launch Browser, press Continue
(
). To stop this message repeating, press Remove ( ).
Browser
With Browser, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Browser, your phone connects to the Internet and the
A list of categories (each representing one or more web
sites) appears in the display.
2. Use the navigation keys to browse the categories.
service indicator icon (
) appears in the display.
3. Once the desired category is highlighted, press
(
)
Stored Web Content
to enter the category list.
Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Exit Browser
ᮣ
Press
to exit Browser.
Using Browser
When you use Browser, some of the keys operate differently than
during a normal phone call. Browser presents on-screen items in
any of the following ways:
Launching Browser
1. In standby mode, do one of the following to launch
•
•
•
Text or numeric input.
Links (embedded in content).
Browser:
Numbered options (some may not be numbered).
•
Press the Left navigation key.
57
•
Simple text.
Asterisk/Shift Key — Press before entering text to
You can act upon options or links by using the soft keys.
Browser soft keys
enable uppercase characters.
LastKey—Presstoenterazero(0),ortomovetothe
last item in a menu.
The bottom of the Browser display is a bar that contains browser
commands. The Left and Right (
) soft keys on the
Pound/Space Key — Press to insert a space when
keypad are used to execute the command that appears above
them in the display. These are called “soft keys” because their
function changes depending on the application.
entering text.
Number 1 thru 9 — Use the number keys to select
items in a menu if they are numbered.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
End Key — Press to exit the Browser and return the
phone to standby mode.
Left Soft Key — Press to activatethecommand that
appears above it in the display.
key (
) to select a link when it is highlighted.
How Browser Keys Work
The following table lists Browser keys and their functions.
Right Soft Key — Press to activate the command
that appears above it in the display.
Navigation keys — Use to browselists and options.
BACK Key — A browse, back-up key. Press once to
backuponepage. Pressandhold to gobacktohome
page. Presstoclearthelastnumber, letter, orsymbol
entered. Press and hold to completely clear the
display.
Browser
58
Section 9: Games & Apps
This section explains the Games & Apps features where users
can download multimedia, applications, games, and check news
and sports.
The Games & Apps screen appears in the display with the
Games & Apps icon (
) highlighted. You have the
following options:
Finding Applications
•
•
Press
. The Games & Apps menu appears in the display. You
With Games & Apps, you can
download full featured applications
over the air including games,
personalized ring tones, pictures,
and more.
can use the items in this menu to browse or search for, purchase,
and download applications.
Use the navigation keys to select an application on your phone that
you wish to launch.
1. In standby mode, do one of
the following to launch
Games & Apps:
•
•
Press the Right navigation key.
Press the Menu soft key, then
select Games & Apps
➔
Games & Apps
.
Note: The first time you launch Games & Apps, the warning message
“Browse & Download use airtime.” pops up in your display. To have
this message repeat the next time you launch Games & Apps, press
the Continue soft key. To stop this message repeating, press the
Remove soft key.
59
Section 10: Camera-Camcorder
Use your Jet Set phone to take full color digital pictures and
videos, display them on your phone’s vivid color display, and
instantly share them with family and friends. It’s fun, and as easy
to use as a traditional point-and-click camera or camcorder. This
section explains how you can do the following:
The message “Loading” appears in the display followed
by a camera view finder screen. (See “Screen Layouts” on
Note: You can also activate the camera by pressing Menu ( ), then
selecting Multimedia ➔ Camera.
•
•
•
Take pictures and videos with your phone’s built-in digital camera-
camcorder.
2. Using the display as a viewfinder, point the camera at your
Send and receive pictures and videos taken with your phone’s camera-
camcorder.
subject.
Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.
3. When the image that you wish to capture appears in the
display, press Take
(
).
Taking Pictures and Videos
4. To save the picture to memory, press the Save soft key.
Taking pictures videos with the built-in camera-camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
5. To erase the photo, press the Erase soft key.
Tip: You can change a number of the camera’s settings to suit particular
information.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
Taking Multi Shot Pictures
1. In standby mode, press and hold the Camera key (
)
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
on the right side of the phone.
Camera-Camcorder
60
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
•
Frame — Lets you select to a preferred or characteristic frame to
surround your next photo(s).
4. When you select Multi-shot, the following options appear in
the display:
1. In standby mode, press and hold the Camera key (
on the right side of the phone. The message “Loading”
appears in the display followed by a camera view finder
information.)
)
•
•
3
5
When you select Mosaic-shot, the following options
appear in the display:
•
•
2x2
3x3
Note: You can also activate the camera by pressing Menu ( ), then
selecting Multimedia ➔ Camera.
5. Use the Up and Down navigation keys to highlight 3 or 5
(Multi-shot) or 2x2 or 3x3 (Mosaic Shot), then press the
key.
2. Press the Options soft key. The options menu bar appears
in the display with the Camera Mode icon (
)
The Multi-shot progress bar (
) or
highlighted.
the Mosaic-shot icon ( ) (which acts as a progress
3. Use the Left and Right navigation keys to highlight the
indicator while pictures are being taken) appears in the
display.
Multi Shot icon (
). The following Multi Shot options
appear in the display:
6. Using the display as a viewfinder, point the camera lens at
•
•
•
Single shot — Lets you take one photo.
your subject.
Multi-shot — Lets you take a series of 3 or 5 photos.
Mosaic-shot — Lets you take a mosaic of 4 or 9 photos.
61
7. When the image that you wish to capture appears in the
display, press Take ). The camera takes a series of
2. Press
. The message “Loading” appears in the
(
display followed by the camcorder view finder screen. (See
photos in quick succession (Multi-shot) or one picture at a
time (Mosaic-shot) until the selected number are taken,
then the Multi-shot Select to Save screen or the Mosaic-
shot multiple-photo screen appears in the display.
Note: You can also activate the camcorder by doing one of the following:
1. Pressing Menu ( ), then selecting Multimedia ➔ Camcorder.
2. From the camera screen, by pressing the Options soft key, then
•
Multi-shot:
selecting the Camcorder option.
–
–
To save the pictures to memory, press the Done soft key.
To discard the pictures, press the key.
3. Using the display as a viewfinder, point the camera lens at
•
Mosaic-shot:
your subject.
–
–
To save the pictures to memory, press the Save soft key.
To send the picture to AxcessMyPics.com or in a picture message,
4. When the image that you wish to capture appears in the
display, press Rec ( ). Recording continues until you
press Stop ( ) or until 15 seconds of video has been
recorded, depending on the Recording Mode option.
press Send
(
).
–
To discard the pictures, press the Erase soft key.
Taking Videos
To take a video using the current camcorder settings, do the
following:
5. Press the Save soft key to save the video to memory.
6. Press the Erase soft key to erase the video.
1. In standby mode, press and hold the Camera key (
)
on the right side of the phone. The message “Loading”
appears in the display followed by the camera view finder
information.)
Camera-Camcorder
62
Multi-shot in use — Takes a series of multiple
pictures automatically when you press Take
number of pictures taken depends upon the Multi-shot
setting.
Screen Layouts
Camera Screen
(
). The
When you activate your phone’s
camera, the second line of the
display is reserved for the current
camera resolution setting and the
picture counter. The center of the
display shows a viewfinder image of
the subject at which the camera is
pointed. The soft key labels on the
bottom line of the display change to
the following:
Mosaic-shot in use — Takes multiple pictures when
you press press Take
(
), and presents them in a 2x2
or 3x3 matrix. The number of pictures taken depends
upon the Mosaic Shot setting.
Camera Resolution — Indicates camera’s current
resolution setting. (You can change the camera
resolution setting. See “Camera Options” on page 65.
for more information.)
Night Shot — Indicates the camera is set to take
pictures in low light.
•
Gallery — Pressing the Gallery soft key opens the My Images
multimedia folder so you can view or manage your stored pictures.
(See “The Photo Gallery” on page 76. for more information.)
Self Timer in use — Delays the camera shutter from 3
to 10 seconds after you press Take
(
).
•
•
Take — Pressing the
appearing on the display.
key takes a picture of the image currently
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
information.)
Options — Pressing the Options soft key opens a menu bar of camera
options and settings.
Camera Screen Icons
Photo Count — Indicates the number of photos you
have taken and the maximum number of photos you
can take. (Depending on the camera Resolution,
Quality, and Default storage settings.)
Camera — Indicates the camera is active.
63
Zoom — Enlarges the image from X0 to X9 before
you take a picture. (Depending on the camera
Resolution setting.)
Camcorder Screen Icons
Camcorder — Indicates the camcorder is active.
Brightness — Brightens or darkens the image from
-4 to +4.
Recording Mode — Indicates camcorder is in MMS
mode (as shown) with Quality and recording time limits
or in Normal mode (
).
Self Timer in use — Delays the camcorder from
recording for from 3 to 10 seconds after you press Rec
Camcorder Screen
When you activate your phone’s
camcorder, the first line of the
display is shows current camcorder
setting icons. The center of the
display shows a viewfinder image of
the subject at which the camcorder
is pointed. The soft key labels on the
bottom line of the display change to
the following:
(
).
White Balance — Indicates the camcorder’s white
balance setting. (You can change the camcorder white
more information.)
Zoom — Enlarges the image from X0 to X9 before
you take a video. (Depending on the camcorder
quality setting.)
Brightness — Brightens or darkens the image from
•
Gallery — Pressing the Gallery soft key opens the My Videos
multimedia folder so you can view or manage your stored pictures.
-4 to +4.
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
•
•
Rec — Pressing the
key starts the camcorder recording a video
of the image currently appearing in the display.
Options — Pressing the Options soft key opens a menu bar of
camcorder options and settings.
•
Save the picture or video by pressing the Save soft key.
Camera-Camcorder
64
A picture is stored in the My Images folder. A video is stored in the My
Videos folder. These folders are part of the phone’s memory and/or
part of an optional Memory Card devoted to storing, browsing, and
viewing saved pictures and videos. (See “The Photo Gallery” on
page 76. for more information.)
•
•
•
•
•
Self Timer
White Balance
Color Effect
Shortcuts
Settings
•
•
Send the picture or video to someone else by pressing Send
(
).
3. Highlight the desired option and/or setting, then press
to save the selected setting.
Camcorder
Discard the picture or video by pressing the Erase soft key.
1. In camera mode, press the Options soft key. The options
Camera Options
menu bar appears in the display.
The Camera Options let you adjust the default camera settings to
suite available lighting, the subject of the photo, or the purpose of
the photo. To access Camera Options, do the following:
2. Select Camcorder. The Camcorder view finder screen
appears in the display.
1. In standby mode, press and hold the Camera key (
).
Multi Shot
The camera viewfinder screen appears in the display.
Multi Shot lets you take multiple pictures in succession at the
touch of a key.
2. Press the Options soft key. The following sub-menus
1. In camera mode, press the Options soft key. The options
appear in the display:
menu bar appears in the display.
•
•
•
•
Camera/Camcorder Mode
Multi Shot
Resolution
Night Shot
2. Highlight the Single Shot icon (
). The following
options appear in the display:
•
Single shot — 1 picture taken manually.
65
•
Multi-shot — 3 of the same new picture taken automatically in
succession / 5 of the same new picture taken automatically in
succession.
2. Highlight Single shot, and then select Frame. A preview
screen of the available Frames appears in the display.
3. Use the Left and Right navigation keys to show the various
•
•
Mosaic-shot — 4 pictures taken manually in a 2-by-2 array / 9
pictures taken manually in a 3-by-3 array.
Frames.
Frame — Lets you select to a preferred or characteristic frame to
surround your next photo(s).
4. When you decide on the Frame you wish to use, press
Select ( ). The camera screen appears in the display
with your selected Frame in place.
3. Select the desired option.
Note: When a Multi Shot option is set to a value other than Off, either a
The next time you press Take
(
), the camera includes
Series Shot progress bar (
Shot icon ( ) appears in the viewfinder screen.
) or a Divided
the selected Frame in your picture.
Resolution
The next time you press the
key, the camera takes
Change the size (in bytes) of your pictures using the Resolution
setting.
several pictures in rapid succession.
Frame
1. In camera mode, press the Options soft key. The options
Frame lets you temporarily apply one of the preloaded picture
frames in your phone to characterize or enhance one or more
pictures.
menu bar appears in the display.
2. Highlight one of the following Resolution options:
•
•
•
•
•
1600x1200 (pixels)
1280x960 (pixels)
1024x768 (pixels)
640x480 (pixels)
320x240 (pixels)
Note: The None frame is a blank frame.
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
Camera-Camcorder
66
•
Picture ID — lets you take pictures the correct size and resolution
1. In camera mode, press the Options soft key. The options
for Contacts list picture IDs.
menu bar appears in the display.
3. Press
screen.
. You’re returned to the camera viewfinder
2. Highlight the Self Timer (
) icon. The following
options appear in the display:
•
•
•
•
Off
Note: The Resolution setting affects zoom capabilities. When Resolution is
set to 1600x1200, zoom is not available. When Resolution is set to any
value lower than 1600 X 1200, zoom settings 1 – 8 are available.
3 Seconds
5 Seconds
10 Seconds
Night Shot
3. Select the desired Self Timer option. If you select 3 Sec., 5
sec., or 10 sec., the Self Timer icon appears in the camera
screen in the display.
Night Shot lets you take pictures in low light.
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
The next time you press Take
(
), the countdown timer
2. Highlight the Night Shot (
) icon. The following
indicates the time remaining before the camera takes the
picture. The phone reads the countdown timer value
beginning with two or three and continuing to zero, when
the picture is taken.
options appear in the display:
•
•
Off
On
3. Select the desired option.
Self Timer
Tip: To stop the countdown timer without resetting it, press
.
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
67
White Balance
The next time you press the
key, the camera applies
the selected White Balance to your picture.
White Balance allows you to adjust picture quality according to
available light.
Color Effects
1. In camera mode, press the Options soft key. The options
Change the look of your pictures with Color Effects. Choose from
eight available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
menu bar appears in the display.
2. Highlight the White Balance icon (
). The following
options appear in the display:
1. In camera mode, press the Options soft key. The options
•
Auto — The camera automatically adjusts picture quality to
available light.
menu bar appears in the display.
•
•
Daylight — Use this setting when taking pictures in full sun.
2. Highlight the Color Effects icon (
). The following
Cloudy — Use this setting when taking pictures in cloudy
conditions.
options appear in the display:
Note: Select No Effect to disable Color Effects.
•
•
Tungsten — Use this setting when taking pictures under
incandescent lights.
•
•
•
•
•
•
No Effect — Subjects and pictures appear with a normal hue.
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
Green — Subjects and pictures appear in a greenish hue.
Negative — Subjects and pictures appear in inverted colors.
Sepia — Subjects and pictures appear in a brownish-gray hue.
Black&White — Subjects and pictures appear in black and white.
Aqua — Subjects and pictures appear in an aqua hue.
Each option, as you highlight it, shows the effects it has on
a picture.
3. When you decide on the White Balance you wish to use,
press
. The camera viewfinder screen appears in the
As you highlight a Color Effect, the results are previewed in
the camera viewfinder screen.
display with your selected White Balance applied.
Camera-Camcorder
68
3. Select the color effect of your choice. You’re returned to
2. Select one of the Quality options: High, Normal, or
Economy. You’re returned to the camera viewfinder
screen.
the camera viewfinder screen.
When you take your next picture, the phone’s display
previews your subject image with the selected color effect.
ISO
1. In camera mode, press the Options soft key. The options
Settings
Default storage
menu bar appears in the display.
2. Select Settings ➔ ISO. The following options appear in
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
the display:
•
•
•
•
Auto
100
200
400
2. Select Settings ➔ Memory. The following Memory
options appear in the display:
•
•
Phone Memory — Stores pictures in phone memory.
Card Memory — Stores pictures on an optional microSD Memory
Card.
3. Select the ISO setting of your choice. You’re returned to the
3. Select the memory location setting of your choice. You’re
camera viewfinder screen.
returned to the camera viewfinder screen.
Exposure metering
Quality
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
2. Select Settings ➔ Exposure metering. The following
1. In camera mode, press the Options soft key. The options
options appear in the display:
menu bar appears in the display.
69
Shutter Sound
•
•
•
Normal — Adjusts exposure to the average light level over a large
picture area.
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
Center-weighted — Adjusts exposure to the average light level
over a center portion of the subject.
Spot — Adjusts exposure to the light level over a small portion of
the subject.
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
3. Select the Metering setting of your choice. You’re returned
2. Select Settings ➔ Shutter Sound. Use the Left and Right
navigation key to preview each of the following shutter
sounds:
to the camera viewfinder screen.
When you take your next picture, the phone’s display
previews your subject image with the measured exposure.
•
•
•
•
•
•
Off
Viewfinder Mode
Shutter1
Shutter2
Shutter3
OK
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
2. Select Settings ➔ Viewfinder Mode. The following
options appear in the display:
Melody
•
Landscape — Shows a wider, more panoramic view of the
3. Select the shutter sound of your choice. You’re returned to
subject.
the camera viewfinder screen.
•
Portrait — Shows a narrower, more vertically oriented view of the
subject.
Auto Save
3. Select the viewfinder mode setting of your choice. You’re
returned to the camera viewfinder screen, which now
shows the selected view.
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
2. Select Settings ➔ Auto Save.
Camera-Camcorder
70
The following options appear in the display:
camcorder view finder screen.
•
•
Off
On
2. Press the Options soft key. The following sub-menus
appear in the display:
3. Select the automatic save setting of your choice. You’re
•
•
•
•
•
Camera/Camcorder Mode
Recording Mode
Self Timer
returned to the camera viewfinder screen.
Reset Settings
White Balance
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
Color Effects
• Shortcuts
Settings
3. Select the desired option and/or setting.
2. Select Settings.
•
3. Press the Reset soft key. You are prompted to confirm
reset of all camera settings.
Camera
•
•
Select the Yes option to reset the camera settings to default values.
1. In camcorder mode, press the Options soft key. The
Select the No option to keep the current camera settings.
options menu bar appears in the display.
Camcorder Options
2. Select Camera. The Camera viewfinder screen appears in
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video. To access Camcorder Options, do the
following:
the display.
Recording Mode
1. In camcorder mode, press the Options soft key. The
options menu bar appears in the display.
1. In standby mode, press and hold the Camera key (
).
The camera viewfinder screen appears in the display. The
message “Loading” appears in the display followed by the
71
2. Highlight Recording Mode. The following options appear
The next time you press Rec
(
) key, a countdown timer
in the display:
in the display indicates the time remaining before the
camcorder starts recording the video. The phone reads the
countdown timer value beginning with two or three and
continuing to zero, when recording begins.
•
Limit for Message — Record videos that are a maximum of 15
seconds long. The videos can be included in video messages.
•
Normal — Record videos that are any length, depending on
available memory.
3. Select the desired recording mode setting. The camcorder
Tip: To stop the countdown timer without resetting it, press
.
screen appears in the display.
White Balance
Self Timer
White Balance allows you to adjust video quality according to
available light.
Self Timer lets you delay taking a video long enough to let you
join others in the video.
1. In camcorder mode, press the Options soft key. The
1. In camcorder mode, press the Options soft key. The
options menu bar appears in the display.
options menu bar appears in the display.
2. Highlight White Balance. The name of the current White
Balance setting appears in the second line of the display.
The options are:
2. Highlight Self Timer.
The following options appear in the display:
•
•
•
•
Off
•
Auto — The camcorder automatically adjusts color balance to
available light.
3 Seconds
5 Seconds
10 Seconds
•
•
Daylight — Use this setting when recording videos in full sun.
Cloudy — Use this setting when recording videos in cloudy
conditions.
3. Select the desired delay. The camcorder screen appears in
the display.
Camera-Camcorder
72
•
•
Tungsten — Use this setting when recording videos under
Note: Choose No Effect to disable Color Effects.
incandescent lights.
Fluorescent — Use this setting when recording videos under
fluorescent lights.
•
•
•
•
•
No Effect — Subjects and pictures appear with a normal hue.
Green — Subjects and pictures appear in a greenish hue.
Negative — Subjects and pictures appear in inverted colors.
Sepia — Subjects and pictures appear in a brownish-gray hue.
3. Use the Up and Down navigation keys to show the various
White Balances and the effects they have on a video.
4. When you decide on the White Balance you wish to use,
Black & White — Subjects and pictures appear in black and
white.
press
the display with your selected White Balance applied.
The next time you press Rec ), the camcorder applies
the selected White Balance to your video.
. The camcorder viewfinder screen appears in
•
Aqua — Subjects and pictures appear in an aqua hue.
3. Select the desired Color Effect. You’re returned to the
(
camcorder viewfinder screen.
When you record your next video, the phone’s display
previews your subject image with the selected color effect.
Color Effects
Change the look of your videos with Color Effects. Choose from
eight available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
Settings
Default storage
1. In camcorder mode, press the Options soft key. The
options menu bar appears in the display.
1. In camcorder mode, press the Options soft key. The
options menu bar appears in the display.
2. Select Settings.
2. Highlight the Color Effects icon (
). Use the navigation
3. Highlight Default storage. The following Memory options
keys to preview the following Color Effects:
are available:
73
•
•
Phone Memory — Stores videos in phone memory.
2. Select Settings ➔ Start Sound. The following options
Card Memory — Stores videos on an optional microSD Memory
Card.
appear in the display:
•
•
•
•
Off
4. Select the memory location setting of your choice. You’re
Beep
returned to the camcorder viewfinder screen.
Look Here!
1,2,3!
Quality
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
3. Select the desired start sound. You’re returned to the
camcorder viewfinder screen.
1. In camcorder mode, press the Options soft key. The
End Sound
options menu bar appears in the display.
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
2. Highlight Quality.
3. Select High, Normal, or Economy. You’re returned to the
camcorder viewfinder screen.
1. In camcorder mode, press the Options soft key. The
Start Sound
options menu bar appears in the display.
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
2. Select Settings ➔ End Sound. The following options
appear in the display:
•
•
•
•
Off
1. In camcorder mode, press the Options soft key. The
Beep
OK
options menu bar appears in the display.
Melody
Camera-Camcorder
74
3. Select the desired end sound. You’re returned to the
Zoom
camcorder viewfinder screen.
Zoom lets you temporarily enlarge the pictures/videos you take.
Increasing the Zoom (1 – 9) enlarges your pictures/videos (0 is
normal).
Auto Save
1. In camcorder mode, press the Options soft key. The
ᮣ
In camera or camcorder viewfinder screen, use the Up and
Down navigation keys to adjust the Zoom (the screen
image enlarges to show the affects of your changes).
options menu bar appears in the display.
2. Select Settings ➔ Auto Save. The following options
appear in the display:
The next time you press Take
/
Rec
(
), the camera/
•
•
Off
On
camcorder takes an enlarged picture or the camcorder
takes an enlarged video according to your selected Zoom
setting.
3. Select the automatic save setting of your choice,. You’re
returned to the camcorder viewfinder screen.
Brightness
Reset Settings
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures/videos
(0 is normal).
1. In camcorder mode, press the Options soft key. The
options menu bar appears in the display.
2. Select Settings.
ᮣ
In camera or camcorder viewfinder screen, use the Left
and Right navigation keys to adjust the Brightness (the
screen image lightens or darkens to show the affects of
your changes).
3. Press the Reset soft key. You are prompted to confirm
reset of all camcorder settings.
•
Select the Yes option to reset the camcorder settings to default
values.
•
Select the No option to keep the current camcorder settings.
75
The next time you press Take
/
Rec
(
), the camera/
•
Move — Relocate the currently displayed or highlighted picture
from phone memory to a Memory Card or from a Memory Card to
phone memory.
camcorder takes a lighter or darker picture or the
camcorder records a lighter or darker video according to
your selected Brightness setting.
• View by Location — View All pictures or only those in Phone
Memory or Card Memory.
•
•
Rename — Rename the currently displayed or highlighted picture.
Lock Unlock — Lock the currently displayed or highlighted
image so that it cannot be deleted, or unlock the image so that it
can be deleted.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
/
• Print — Prints file on Bluetooth printer.
1. In the Camera viewfinder screen, press the Gallery soft
•
•
Slide Show — Show the pictures as a full screen slide show.
key. Any pictures that you’ve saved appear in the display.
File Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
Note: You can also access My Images by pressing the Menu soft key, then
•
Get More Graphics — Launches the Browser, letting you find and
download graphics.
selecting Multimedia ➔ My Images.
2. Use the navigation keys to browse pictures in the gallery.
4. Select the desired option to perform the function for the
option or enter its sub menu.
3. Press the Options soft key while viewing pictures in the
Gallery. The following options appear in the display:
Switch From Expanded to Thumbnail Mode
•
Send — Send the currently displayed or highlighted picture as a
1. Highlight a picture that you wish to view full size, then
Picture message.
press View
(
(
).
•
Set As — Assign the currently displayed or highlighted picture to
be standby screen Wallpaper or as a Picture ID for someone in your
Contacts list.
2. Press View
) again to return to the thumbnail view of
your photos.
•
Erase Files — Mark and erase selected unlocked image files.
Camera-Camcorder
76
• Lock
File Info — View the Name, time and date created, resolution,
size, and duration of the currently highlighted or displayed video.
/Unlock — Blocks/permits erasure of this video clip.
The Video Gallery
Saved videos are stored in the My Videos folder. You can view the
videos one at a time (expanded mode), or browse several videos
at once in thumbnail format.
•
4. Select the desired option to perform the function for the
option or enter its sub menu.
1. In the Camcorder viewfinder screen, press the Gallery soft
key. Any videos that you’ve saved appear in the display.
Switch From Expanded to
Thumbnail Mode
1. Highlight a video that you
Note: You can also access My Videos by pressing the Menu soft key, then
selecting Multimedia ➔ My Videos.
wish to play full size, press
2. Use the navigation keys to browse videos in the gallery.
Play
(
). The media player
3. Press the Options soft key while viewing videos in the
launches and begins playing
the selected video.
gallery. The following options appear in the display:
•
Send — Send the currently displayed or highlighted video as a
2. To return to the thumbnail
view of your videos, press the
Up navigation key.
Video message.
•
Set As Wallpaper — Assign the currently displayed or highlighted
video to be standby screen Wallpaper.
Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
•
•
Erase Files — Mark and erase selected unlocked video files.
Move — Relocate the currently displayed or highlighted video from
phone memory to a Memory Card or from a Memory Card to phone
memory.
1. In standby mode, press and hold the Camera key (
)
•
•
View by Location — Select videos in All locations, in Phone
Memory only, or in Card Memory only.
to activate the camera.
Rename — Rename the currently displayed or highlighted video.
- Or -
77
In Camera mode, press the Options soft key and select
Camcorder to activate the camcorder.
Note: To record a video for inclusion in a Video Message, the camcorder
2. Using the display as a viewfinder, take the desired picture
or record the desired video by pressing Take
To stop video recording, Press Stop ).
3. Press Send ( ). The picture or video is saved
/
Rec
(
).
(
autonatically, and the Create Pic Msg or Create Video
Msg screen appears in the display.
4. Enter the recipient’s phone number or email address using
the keypad.
5. Press OK
(
) to save the address(es) and move to the
Subject field. Use the navigation keys to move to the other
6. When you are finished composing your message, press
Send ( ) to send the Picture or Video message to the
intended recipients.
Camera-Camcorder
78
Section 11: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
• Ringback Tones — Launches the Browser so that you can locate
and obtain ringback tones.
2. Select the desired option to launch the desired feature or
open the desired sub-menu. The following sub-sections
describe the above listed options in greater detail.
Accessing Multimedia
1. In standby mode, press the Menu soft key, then select
Multimedia. The following Multimedia options appear in the
display:
Music Player
Music Player lets you play downloaded music files (MP3) stored
on a Memory Card.
• Camcorder — Lets you launch and set up your phone’s
Launching the Music Player Library Menu
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
Music Player.
• Music Player — Lets you play music files and create and manage
Playists stored on an optional microSD™ Memory Card.
2. Press the Library soft key.
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
The Library screen appears
in the display, showing the
following options:
• My Videos — Lets you choose the videos that appear in your
phone’s display.
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• Now Playing — Lists the file(s)
currently being played.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.
• All — Lists all music files on the
Memory Card and lets you play
79
–
Song Info — Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, Duration, File Size, and Date of the highlighted music
file.
individual music files or play multiple music files by creating a
temporary music playlist.
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
Select the desired option.
Playing Music
1. In standby mode, press the
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
• Playlists — Lists any playlists you have saved and lets you create,
Menu soft key, then select
save, and manage playlists.
Multimedia
➔
Music Player.
3. Highlight a music file, then:
2. Press the Library soft key. The
Library screen appears in the
display, showing the following
options:
•
•
•
Press the Play soft key to play
the file.
Press MARK
(
) to select the
file for playing or other options.
Press the Options soft key to
select and apply any of the
following options to the
highlighted or marked music
files(s):
• Now Playing
• All
• Artists
• Albums
• Playlists
–
Mark All — Marks all listed music files for playing, removal, or
assignment of player settings.
–
–
Send Via Bluetooth — Send this file to another Bluetooth device.
Erase — Deletes highlighted or marked music file(s) from the Memory
Card.
–
Add to Playlist — Lets you add this file to a new or existing Playlist.
Multimedia
80
Music Player Controls
3. Highlight the desired option,
press Open ), then do
•
Volume key:
(
–
To play a music file louder, press the
Volume key Up.
To play a music file softer, press the
Volume key Down.
one of the following:
• All option — Use the
Navigation key to highlight a
music file, then press the Play
soft key to play the file.
–
•
Navigation key
To pause/resume playing a music file,
press
:
–
Tip: To play additional files, highlight and
mark additional files for playback.
.
Note: With the flip closed, use the touch key
pad on the front of the phone to pause/resume playing a music file.
• Other options — Highlight an Artist, Album, or Playlist, then press
–
–
To stop playing a music file, press the Down navigation key.
To skip play to an earlier music file in the selected list, press the Left
navigation key.
Open
(
).
Highlight a music file, then press the Play soft key to play the file.
–
–
To skip play to a later music file in the selected list, press the Right
navigation key.
To return to the selected list and choose another music file to play,
press the Up navigation key.
The Music Player screen appears in the display and the
selected music file/playlist begins playing.
•
•
Library soft key — Returns you to the Library screen.
Options soft key — Shows the following sub-menus and options:
–
Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, or Repeat All.
81
–
–
Add to Playlist — Moves you to the Playlists menu to let you add the
selected music file to a playlist.
Remove From List — Temporarily drops the selected music file from
the Library list. To restore the music file to the list, turn your phone off
and back on again.
If there are no pictures stored in your phone or on a
memory card, “No Image” appears in the My Images
screen. [To launch the camera to take a picture, press the
–
–
–
Visual Supplements — Lets you change the Music Player visualization
to Simple View, Spectrum, Album Art, or Lyrics.
If there are pictures stored in your phone or on a memory
card, up to four thumbnail images of your pictures appear
in the display.
Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability (Free) amounts.
Song Info — Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, Duration, File Size, and Date of the highlighted music
file.
Tip: You can also access My Images from:
Select the desired option to launch the option or to access the sub-
menu.
-The Camera screen, by pressing the Gallery soft key.
-The Edit Contact screen, by selecting the picture ID field and pressing
the Set soft key.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (wallpaper) and as picture
IDs for your contacts.
2. Use the navigation keys to highlight a picture.
Press
to expand the selected picture to fill the screen.
1. In standby mode, press the Menu soft key, then select
3. Press the Options soft key. A pop-up menu containing the
Multimedia
➔
My Images
.
following options appears in the display:
• Send — Lets you send the selected image to a specified recipient
in a Picture message.
• Set As — Lets you assign the selected picture as the Main
Wallpaper, the Front Wallpaper, or the Picture ID for a Contact.
Multimedia
82
• Erase Files — Erases one or more selected, unlocked pictures.
My Videos
• Move — Lets you move the image file from the phone to the
My Videos lets you take videos, review your videos, send them as
video messages, and assign your videos as wallpaper on your
phone.
Memory Card or from the Memory Card to the phone.
• View by Location — Lets you view All image files (regardless of
where they are stored), only those image files stored in Phone
Memory, or only those image files stored in Card Memory.
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
My Videos.
• Rename — Lets you rename the selected image file.
If there are no videos stored in your phone or on a memory
• Lock / Unlock — Lets you protect the selected image file from
being deleted.
card, “No Video” appears in the My Videos screen.
• Print — Lets you print a picture to a Bluetooth compatible printer.
If there are videos stored in your phone or on a memory
card, up to four thumbnail images from your videos appear
in the My Videos screen.
• Slide Show — Shows the available images as a sequence of full-
screen pictures.
• File Info — Displays information about the picture, such as the
picture Name, creation Date and Time
,
Resolution, and the data
2. To take a new video, press the Video soft key. The
camcorder view finder screen appears in the display. (For
Size
.
• Get More Graphics — Launches the Browser so you can
download additional graphics files.
4. Select the desired option.
3. To play a video, highlight a video, then press Play
(
).
5. Press
to return to the previous menu, or press
to
return to standby mode.
4. For more My Videos options, press the Options soft key.
The following options appear in the display:
• Send — Lets you send the selected video to a specified recipient in
a Video message.
83
• Set as Wallpaper — Sets the selected video file to play in the
display background when the phone is in standby mode.
Tip: You can also access My Ringtones from:
-A Set Alarm screen by selecting the Ringer option, highlighting the
• Erase Files — Erases one or more selected, unlocked videos.
second (file name) field, pressing the Left or Right navigation key, and
• Move — Lets you move the video from the phone to the Memory
Card or from the Memory Card to the phone.
selecting My Ringtones
.
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
soft key, and selecting My Ringtones
• View by Location — Lets you list All video files (regardless of
where they are stored), only those video files stored in Phone
Memory, or only those video files stored in Card Memory.
.
2. Use the navigation keys to highlight a particular ringtone,
• Rename — Lets you change the name of the video.
the following options are available:
• Lock / Unlock — Lets you protect the video from being deleted.
• File Info — Displays information about the video, such as the video
•
Press the Set As soft key to assign the highlighted ringtone. The
following options appear in the display:
Name, creation Date and Time
,
Resolution, data Size, and the
–
–
–
Ringtone — Lets you assign the selected ringtone to incoming voice
calls.
Duration
.
5. Select the desired option.
6. Press to return to the previous menu, or press
return to standby mode.
My Ringtones
Contact ID — Lets you assign the selected ringtone as the distinctive
ringer for a Contact.
to
Alert Sounds — Lets you assign the selected ringtone to All
Messages
,
Text Message, Pic/Video Message, or Voicemail.
•
•
Press to Play the ringtone.
Press the Options soft key and the following options appear in the
display. Most appear only for downloaded ringtones:
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
–
Send — Lets you send the selected file to a specified recipient in a
message or to another Bluetooth device.
1. In standby mode, press the Menu soft key, then select
–
–
Erase — Erases the selected file.
Multimedia
➔
My Ringtones. A list of ringtones appears in
Move — Lets you move the selected file from the phone to a Memory
the display.
Card or from a Memory Card to the phone.
Multimedia
84
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
soft key, and selecting My Sounds
–
–
–
–
Rename — Lets you change the name of the selected file.
Lock / Unlock — Lets you prevent/permit file deletion.
Erase Files — Erases one or more downloaded ringtones.
.
Note: Recorded sound files (voice memos) do not appear in these lists.
Ringtone Info — Displays information about the selected file, such as
the file name, the file type, and the data size.
–
Get More Tones — Launches the Browser to let you locate and
download additional ringtones.
3. For recorded sound files, press the Options soft key. The
3. Press and/or select the desired option.
4. Press to return to the previous menu, or press
return to standby mode.
following options are available:
to
• Send — Lets you send the selected sound file to a specified
recipient in a Picture message.
• Set As — Lets you assign the highlighted sound file. The following
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
options appear in the display:
–
–
–
Ringtone — Lets you assign the selected ringtone to incoming voice
calls.
Contact ID — Lets you assign the selected ringtone as the distinctive
ringer for a Contact.
1. In standby mode, press the Menu soft key, then select
Alert Sounds — Lets you assign the selected ringtone to All
Multimedia
➔
My Sounds. Record New and a list of sound
Messages
,
Text Message, Pic/Video Message, or Voicemail.
files appears in the display.
• Rename — Lets you rename the sound file.
• Move — Lets you move this sound file between phone and card
Tip: You can also access My Sounds from:
memory.
-A Set Alarm screen by selecting the Ringer option, highlighting the
• Lock / Unlock — Lets you protect the sound file from being
deleted.
second (file name) field, pressing the Left or Right navigation key, and
selecting My Sounds
.
• Erase Files — Erases all or selected sound files.
85
• Sound Info — Displays information about the sound file, such as
3. Once you’re finished recording, press Save
(
). The new
the title, file size, file type, date, and time.
recording is saved, and the standby mode screen appears
in the display.
4. Select the desired option.
5. Press
to return to the previous menu, or press
to
Review Voice Memos
return to standby mode.
If you’ve saved any voice memos, you can review them anytime.
Voice Memo
1. In standby mode, press the Menu soft key, then select
You can use your phone to record voice memos for later
playback.
Multimedia
➔
My Sounds. A list of sound files appears in
the display.
2. Highlight the voice memo you wish to review.
3. Press Play ) to play the voice memo.
Note: The maximum length for a single voice memo is 60 seconds.
(
You can save as many voice memos as will fit in the empty
memory capacity.
•
To stop the memo, press Stop
restart playing the memo.
(
). Press Play
(
)
again to
Record a Voice Memo
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
1. In standby mode, press the Menu soft key, then select
Multimedia
screen appears in the display.
2. Press Rec ), then start speaking. As it is recording, the
➔
My Sounds
➔
Record New. The Record New
Erase One Voice Memo
1. In standby mode, press the Menu soft key, then select
(
Multimedia
➔
My Sounds. A list of sound files appears in
phone displays a countdown timer that shows the seconds
remaining for the recording.
the display.
2. Highlight the voice memo you wish to erase.
•
To pause the memo, press the Pause soft key. When a memo is
paused, select Resume to continue recording.
Multimedia
86
3. Press the Erase soft key. You are prompted to confirm the
erasure of the highlighted file.
4. Press the Yes soft key to erase the selected voice memo, or
press the No soft key to return to the list of sound files.
Erase All Voice Memos at One Time
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
My Sounds. A list of sound files appears in
the display.
2. Highlight a voice memo file.
3. Press the Options soft key.
4. Select Erase Files. A list of all sound files appears in the
display, with check boxes beside the recorded sound
(voice memo) files.
5. Select individual files or press the MarkAll soft key to
select all recorded sound files.
6. Press the Done soft key. You are prompted to confirm your
selected erasures.
7. Press the Yes soft key to erase all of the selected recorded
sound files or press the No soft key to return to the list of
sound files.
87
Section 12: Tools/Utilities
This section explains how to use your phone’s PIM functionality
to schedule events, set reminders, create a “to do” list, perform
calculations, and more.
•
Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
Stop Watch — Lets you view the amount of time.
Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
•
•
Tools/Utilities Menu
Tools/Utilities is a suite of Personal Information Management
(PIM) applications such as a Calendar, To Do List, and Memo Pad
that run on your phone. You can use your phone to schedule
events, set reminders, create a to do list, perform calculations,
and more with the functions provided by this useful feature.
•
Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of keypresses.
2. Select the desired application.
The following sections provide detailed descriptions of the
applications and how to use their functions.
Opening Tools Menu
1. In standby mode, press the Menu soft key, then select
Tools/Utilities. The following sub-menus appear in the
display:
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
•
•
Bluetooth — Lets you access Bluetooth functions.
Calendar — Lets you view the current, past, or future month in a
monthly calendar layout.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
•
•
Memo Pad — Lets you store and review useful information.
Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
•
World Time — Lets you view the current time of day or night in
another part of the world.
Tools/Utilities
88
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
“
Place Device You Are Connecting To In Discovery Mode
”
appears in the display.
3. Place the Bluetooth device in discoverable mode. (See the
Turn Bluetooth On/Off
device user manual for more information.)
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
4. Press OK
(
). Names of the available devices appear in
the display.
5. Highlight the device you want to pair with your phone.
6. Press Pair ( ) to pair the selected device with the phone.
You are prompted to enter the passkey or PIN for the
selected device.
Add New Device
To search for available Bluetooth devices:
Note: When pairing you phone with another Bluetooth device other than a
headset or headphones, the same passkey or PIN must be entered on
both devices (when prompted) for the pairing to succeed.
1. From the Tools/Utilities menu, select Bluetooth. The
following options appear in the display:
•
•
Registered List
Bluetooth Settings
7. Enter the device passkey or PIN and press OK
(
). When
pairing is complete, you are prompted to Connect with the
selected device.
2. Select Registered List ➔ Add New Device.
If Bluetooth is off, you are prompted to “Turn Bluetooth
8. Select Yes to connect your phone with the selected device.
Select No to bypass connection and return to the
Registered List.
Power On?”.
•
To leave Bluetooth off and return to the Bluetooth menu, press the
No soft key.
•
To turn Bluetooth on, press the Yes soft key.
89
Device Name
Registered List
This menu provides a list of Bluetooth wireless technology
devices discovered by your handset.
Shows the handset name. To change this name, enter a new
name and press OK
(
). To keep the current Device Name,
press the Cancel soft key.
1. From the Tools/Utilities menu, select Bluetooth ➔
Registered List. A list of registered devices appears in the
display.
Supported Profiles
Lists and explains the Bluetooth profiles your phone supports.
Device Info
Connecting to a Bluetooth Device
Shows the Bluetooth Type, Status, and Address of your phone.
From the Device list,
Calendar
1. Highlight the device and press OK
(
).
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
2. If you are unable to pair with the device a pop-up appears
in the display. Press the Yes soft key to retry.
Bluetooth Settings
Enable/Disable
View an event
1. From the Tools/Utilities menu, select Calendar.
Selecting this option turns Bluetooth on or off.
Discovery Mode
A calendar appears in the display with the current date
highlighted. The month and year also appear.
Allows other users to see your accessibility. Select On for other
devices to see your device for 1 minute, or Off for no visibility.
2. Use the Navigation key to move around within the calendar
screen. The following controls are also available:
•
•
Press the Add soft key to add an event to the highlighted date.
To view previous months, press the Volume key ( ) Up.
Tools/Utilities 90
•
•
To view future months, press the Volume key (
) Down.
Note: Enter the dates and times for the event using 2 digits for day, month,
Use the Navigation key to move to an individual day, one day or one
week at a time.
hour, and minute entries. Use 4 digits for year entries.
Use the Left/Right navigation keys to change between AM and PM
.
•
•
Press View
(
) to open the highlighted date.
Press the Options soft key while viewing the calendar. The
following options appear in the display:
Tip: You can also press
for AM or press
for PM.
–
Weekly Monthly — Changes the display to a weekly/monthly
format.
/
4. When you’re finished entering event details, press
to
store the event in your calendar.
–
–
–
–
Go to Date — Lets you jump to any date you specify.
Go to Today — Lets you jump to any date you specify.
Erase Old — Lets you erase past events.
Note: If you set a notification Alert, an alert (tone/vibration/light) will notify
you prior to the event.
Erase all — Lets you erase all events.
Memo Pad
Select the desired option to perform the related process.
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
Add a New Event
1. From the Tools/Utilities menu, select Calendar.
A calendar appears in the display with the current date
highlighted. The month and year also appear.
Add a Memo
1. From the Tools/Utilities menu, select Memo Pad
.
2. Highlight the date of the new event, then press the Add
If you have any stored memos, they appear as a list in the
soft key. The New Event screen appears in the display.
display. If this is your first time in Memo Pad, “No Memos
”
3. Use the Navigation key and the keypad to select and enter
details of the event. (For more information, refer to
appears in the display.
91
2. To add a new memo, press the Add soft key. A numbered
Alarm Clock
Memo screen appears in the display.
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
4. When you’re finished entering details for the memo, press
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
Save
(
) to save your memo.
View, Edit, and Erase Memos
1. From the Tools/Utilities menu, select Alarm Clock. The
ᮣ
From the Tools/Utilities menu, select Memo Pad, then
following options appear in the display:
highlight a memo.
•
•
•
Alarm 1
Alarm 2
Alarm 3
•
•
To view the selected memo, press View
(
).
To edit the selected memo, press the Options soft key, then select
2. Select the desired Alarm. A Set Alarm screen appears in
the display containing the following options:
•
•
To erase the selected memo, press the Options soft key, then
select Erase (to erase the highlighted memo) or Erase Notes (to
erase all or selected memos). You are prompted to verify the
erasures.
•
•
Alarm — Turns the alarm Off or On.
Time — Use the numeric keys to enter the time, and use the Left
and Right navigation keys to select AM or PM.
Repeat — Lets you repeat the alarm Daily, Mon – Fri, Weekends,
or Once.
Ringer — Lets you set the alarm ringer to a particular Tone or to
Vibrate.
–
To erase the memos, press the Yes soft key.
•
•
–
To keep the memos, press the No soft key.
For other options, press the Options soft key, you can also:
–
–
Send the selected memo as a Text Msg.
Lock / Unlock the selected memo to prevent/allow its erasure.
Tools/Utilities
92
3. Use the Up and Down navigation keys to select options,
and use the Left and Right navigation keys to select values
for the options.
Disabling Alarms
Turn Off the Alarm
Turning an Alarm to Off allows you to retain the current settings
for later reuse.
4. Use the keypad to enter the time for the alarm.
1. From the Tools/Utilities menu, select Alarm Clock. The
5. When you’re finished, press Save
(
). The alarm is set
following options appear in the display:
and the alarm icon (
display.
) appears in the top line of the
•
•
•
Alarm 1
Alarm 2
Alarm 3
When an Alarm Sounds
2. Highlight an active Alarm.
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
3. Press the Off soft key. The selected alarm is turned off.
Reset the Alarm(s)
ᮣ
Select Dismiss to silence the alarm.
1. From the Tools/Utilities menu, select Alarm Clock. The
following options appear in the display:
•
•
•
•
If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in
the top of the display.
If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
•
•
•
Alarm 1
Alarm 2
Alarm 3
2. Highlight an active alarm.
3. Press the Options soft key. The following options pop-up
in the display:
93
•
•
Reset — Disables the highlighted Alarm and resets its settings to
default values.
Reset All — Disables all Alarms and resets all of their settings to
default values.
The following time zones/cities are supported:
EST/EDT:
Caracas
Brasilia
Mid Atlantic
Detroit
Washington
D.C
New York
Montreal
Boston
4. Select the desired option.
World Time
World Time lets you view the time of
day or night in another part of the
world. World Time displays time in
any of 45 different cities and/or time
zones around the world.
Cape Verde
Berlin
London
Athens
Baku
Paris
Rome
Helsinki
Abu Dhabi
Jakarta
Tokyo
Jerusalem
Tashkent
Hong Kong
Guam
1. From the Tools/Utilities
menu, select World Time.
The World Clock screen
appears in the display.
Moscow
Alma-ata
Beijing
Bangkok
Seoul
Sydney
Okhotsk
Wellington
Samoa
2. To display a time zone and
Midway
HAST/HADT: AKST/AKDT: PST/PDT:
city that you wish to view, do one of the following:
Honolulu
Hawaii
Alaska
Seattle
San Francisco
Los Angeles
•
•
Use the Left/Right navigation keys to browse the World Clock map.
Press the Options soft key and select Go to City, then select a city
from the Go to City list.
Tools/Utilities
94
2. Enter the first number in your
equation using the keypad
(numbers can be up to nine
digits long).
MST/MDT:
CST/CDT:
Denver
Arizona
Dallas
Houston
Mexico City
Chicago
•
•
•
Press
to enter a decimal
point. (Calculator only accepts 3
digits after a decimal point.)
Press
nested calculations with
parentheses.
Press the +/- soft key to change
the sign of an entry.
3. To display Daylight Savings Time (DST) for a selected time
zone, press the DST On soft key. To restore Standard Time,
press the DST Off soft key.
to begin and end
Setting the Home Time Zone
1. In the World Clock screen, use the Left/Right navigation
keys to highlight the desired time zone and/or city.
3. Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
2. Press the Options soft key, then select Set as Home. You are
•
•
•
•
•
Up navigation key — [
Left navigation key — [
OK key — [ ] Equals/Total
Right navigation key — [
Down navigation key — [
x
-
] Multiplication
] Subtraction
prompted to confirm your Home Zone change.
=
3. To change the Home Zone to the selected time zone, select
+] Addition
Yes. To keep the current Home Zone setting, select No
.
÷] Division
Calculator
4. Use the keypad to enter the second number into your
You can perform calculations, including addition, subtraction,
multiplication, and division using your phone.
equation.
5. Press
=
(
) to perform the calculation and view the
1. From the Tools/Utilities menu, press
for Calculator.
result.
The Calculator appears in the display.
95
To perform another calculation, press the Back soft key.
Stop Watch
You can use this menu to set a stop
watch.
•
•
Area
Temperature
To convert a currency, length,
weight, volume, area, or
temperature, do the following:
1. From the Tools/Utilities
1. From the Tools/Utilities
menu, select Converter and
the conversion feature you
wish to use.
menu, select Stop Watch.
2. Press
to start, stop, and
resume the stopwatch count.
3. At the start of each
2. Use the Navigation key to
select the units to be
succeeding event/lap, press
the Record soft key to record
the completion time for the previous event/lap.
converted From and To.
3. Enter the quantity you want converted in the From field.
4. Press the Reset soft key to erase all stop watch (lap) times
The converted quantity appears in the To field.
recorded.
Note: To include a decimal point, press the
key.
Converter
The conversion menu provides the following conversion
categories:
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
•
•
•
•
Currency
Length
Weight
Volume
Tools/Utilities
96
1. From the Tools/Utilities
menu, select Converter ➔
Currency.
7. Press
to return to the Currency Converter screen.
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
2. Press the Rates soft key. The
Exchange Rate list for the
USD currency appears in the
display.
1. From the Tools/Utilities menu, select Converter ➔
Currency.
2. Press the Rates soft key. The Exchange Rate list for the
USD currency appears in the display.
3. Press Edit
(
). The Edit
3. Press the Add soft key. The
Add Exchange Rate screen
appears in the display with
the Base field highlighted.
Exchange Rate screen
appears in the display.
4. Highlight the currency
Exchange Rate to be
changed.
4. Use the Left/Right navigation
keys to select the Base
currency to be converted
from.
5. Use the keypad to change the
exchange rate. (For more
5. Highlight the Currency field.
6. Press
to save the changed exchange rate.
97
6. Enter an identifier of up to 5
characters for the new
1. From the Tools/Utilities menu, select Converter ➔
Currency.
currency using the keypad.
2. Press the Rates soft key. The Exchange Rate list for the
USD currency appears in the display.
3. Highlight the currency exchange rate to be erased.
7. Highlight the Exchange Rate
4. Press the Erase soft key. You are prompted to confirm the
field.
erasure.
8. Enter a decimal exchange
5. To erase the selected exchange rate, press the Yes soft
rate or the new currency
key.
To return to the Exchange Rate list without erasing the
selected exchange rate, press the No soft key.
Note: Press
to enter the decimal point.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
The Exchange Rate field only accepts two digits after the decimal
point.
•
•
Gratuity (tip)
Individual payment (for groups)
9. Press Save
(
) to save the new exchange rate.
Calculations are based on the total amount of the check, a
selected percentage, and the number of people paying.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
1. From the Tools/Utilities menu, select Tip Calculator. The Tip
Calculator screen appears in the display with the Bill field
highlighted.
Tools/Utilities
98
3. If needed, highlight the Tip
field, then use the keypad to
enter a tip percentage. (For
more information, refer to
“Entering Numbers” on
4. If needed, highlight the #
Paying field, then use the
keypad to enter the number of
5. The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
99
Section 13: Voice Service
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
“Say a Command” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
Note: You can also set your phone to start VoiceSignal when you open the
Launching Voice Service
VoiceSignal is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
VoiceSignal includes the following commands:
•
Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
1. In standby mode, press the Menu soft key, then select
Voice Service. The following options appear in the display:
•
Voice Commands—Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
Voice Settings—Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences.
•
•
•
information.)
•
information.)
2. Highlight the desired sub-menu, then press
.
Voice Commands
To start VoiceSignal, do one of the following:
Lookup — Lets you look up and display contact information for any
•
•
In standby mode, press and hold the
key.
From the Voice Service menu, select Voice Commands
.
Voice Service
100
•
•
Go to — Lets you access the Voice Memo, Calendar, and Contacts List
information.)
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
Check — Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you “Sorry, no match found,” and
cancels voice recognition.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
To change the way VoiceSignal uses choice lists:
•
Speak clearly at a normal volume, as if you were talking on the phone.
1. From the Voice Service menu, select Voice Settings ➔
Choice Lists the following options appear in the display:
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voice-
activates the entire list.
•
•
•
Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
Always Off—VoiceSignal never displays a choice list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
101
Tips for Adapting Digit Dialing
Use the navigation keys to highlight the Choice List
•
•
•
•
Use Adapt Digits in a quiet place.
behavior you prefer, then press the
new setting.
key to accept the
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
Sensitivity
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
1. From the Voice Service menu, select Voice Settings ➔
Sensitivity. The Sensitivity screen appears in the display.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
2. Use the Up/Down navigation key to adjust the Sensitivity
setting to Reject More spoken commands or names or to
Reject Less spoken commands or names.
3. To accept the new setting, press the OK soft key.
Adapt Digits
To adapt digit dialing, do the following:
Digit Dialing
1. From the Voice Service menu, press Voice Settings ➔
Digit Dialing. The following options appear in the display:
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
•
•
Adapt Digits
Reset Digits
2. Select Adapt Digits. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Voice Service
102
3. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
2. Select Reset Digits. The phone prompts you to confirm
digit adaptation rest.
Press the OK soft key to reset your digit adaptation, or
press the Back soft key to cancel and retain your digit
adaptation.
•
•
If the recording was good, say “Yes.”
If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
Sound
digits again. Wait for the beep and then say the digits.
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
Repeat this step until you’re satisfied with the recording.
4. After confirming that the recording sounds “ok”, continue
1. From the Voice Service menu, select Voice Settings ➔
the recording process with the next set of digits.
Sound. The following options appear in the display:
5. After 10 sets of digits, “Adaptation complete” plays
through the speaker and you are returned to the Digit
Dialing menu.
•
•
•
•
Prompts — Enables or disables audio prompts.
Digits — Enables or disables audio digit playback.
Names — Enables or disables audio name playback.
Name Settings — Lets you adjust the speed and volume of your
phone’s audio name playback.
Reset Digits
2. Highlight the desired setting.
To reset digit dialing to factory default settings, do the following:
1. From the Voice Service menu, select Voice Settings ➔
Digit Dialing.
3. Press
to accept the new setting.
Voice Launch
The following options appear in the display:
To set the key or action that launches VoiceSignal, do the
following:
•
•
Adapt Digits
Reset Digits
103
1. From the Voice Service menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
•
Key Only — Press and hold
call.
to activate VoiceSignal for one
•
Key / EarMic — Attach a headset to your phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset. Press
to release VoiceSignal.
•
Key / Flip — Press and hold
repeated calls. Open and close the flip to make and end calls using
VoiceSignal. Press to release VoiceSignal.
2. Use the navigation keys to highlight the option you want,
to activate VoiceSignal for
then press
to save and exit.
About VoiceSignal
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on your phone.
ᮣ
From the Voice Service menu, select Voice Settings
About
➔
.
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.
Voice Service
104
Section 14: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
3. Press OK
You’re returned to the Settings menu.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
(
) to select the desired Location setting.
Accessing Your Settings
ᮣ
To access your phone’s settings from standby mode, press
the Menu soft key, then select Settings.
The Settings menu appears in the display.
1. At the Settings menu, select Display Settings. The
Location
following options appear in the display:
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
• Menu Style — Lets you choose whether the Main Menu appears
as a matrix of icons or as a list of menus.
• Wallpaper — Lets you choose the picture(s) that display(s) on your
phone when in standby mode.
• Clock Format — Lets you choose whether to show the time in the
display in digital or analog format.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
• Theme — Lets you select the main menu color scheme.
• Dialing Font — Lets you choose how the number will display on
the display screen.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
• Backlight — Lets you set backlight options for the LCDs, keypad,
and set the brightness.
1. At the Settings menu, select Location.
The following options appear in the display:
• Location On — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
2. Use the navigation keys to highlight the option you want.
105
• Front Contrast — Lets you set contrast level for the Front (Sub)
display:
LCD.
• Main Display
• Front Display
2. Select a sub-menu. The following sections describe the
above listed display sub-menus in greater detail.
Note: When you select Front Display, your Wallpaper selection automatically
changes the Clock Format setting for the Front Clock to Off
.
Menu Style
Menu Style allows you to choose how main menus appear in your
display.
2. Select the desired sub-menu. The following options appear
in the display:
1. At the Settings menu, select Display Settings ➔ Menu
•
•
•
•
My Images — Choose a picture to appear in the display when the
phone is in standby mode.
My Videos — Main Display only — Choose a video to appear in
the display when the phone is in standby mode.
Preset Images — Choose a preset image to appear in the display
when the phone is in standby mode.
Screen Savers — Main Display only — Lets you assign an
animated image to appear in your display when the phone is in
standby mode.
Style. The following options appear in the display:
3. Select the desired option. Up to four pictures, images, or
2. Select the desired Theme.
animations appear in the display.
Wallpaper
4. Highlight a picture, image, or animation; then press
set the highlighted picture, image, animation to display
when the phone is in standby mode.
to
Wallpaper lets you choose the pictures that appear in your
phone’s display while in standby mode.
1. At the Settings menu, select Display Settings ➔
Wallpaper. The following sub-menus appear in the
Changing Your Settings
106
Clock Format
The following options appear in the display:
Clock Format lets you choose whether to show the time in the
display in digital or analog format.
1. From the Settings menu, select Display Settings
➔
Clock
Format. The following clock options appear in the display:
• Main Clock
• Front Clock
2. Select the desired clock. The following clock format
2. Highlight the desired setting, then press
to save the
options appear in the display:
setting.
•
•
Digital — Large numerical time and date display
Analog — 12-hour clock face with moving hour and minute
hands
Dialing Font
Dialing Font lets you select the color used to display dialed
numbers, and enable/disable Zoom-out.
•
Off — Default small digital time and date display
Note: The Clock Format setting for the Front Clock automatically changes to
1. At the Settings menu, select Display Settings ➔ Dialing
Font. The following options appear in the display:
•
•
Monochrome
Size
3. Highlight the desired setting, then press
to save the
setting.
2. When you select Monochrome, the Monochrome screen
appears in the display.
Theme
•
Use the Left and Right navigation keys to preview the dialing font
colors.
Theme lets you select the color scheme your phone uses to
highlight menu items and scroll bar positions.
•
Press OK
(
) to save the previewed color setting.
1. At the Settings menu, select Display Settings ➔ Theme.
107
3. When you select Size, following options appear in the
Backlight
display:
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
• Enable Zoom-out — When you dial more than 10 digits, the font
size automatically reduces to permit all digits to appear in the
display.
Note: Prolonged backlight use drains your battery faster.
• Disable Zoom-out — The font size remains the same, regardless
of the number of digits dialed.
1. At the Settings menu, select Display Settings ➔
4. Select the desired option.
Backlight. The following sub-menus appear in the display:
•
•
•
Main Display — Sets the amount of time the main display
Banner
backlight remains on with the phone idle. Optional settings are
7,
Create your own personalized text greeting that appears in the
display while your phone is in standby mode.
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off
Keypad — Sets the amount of time the keypad backlight remains
on with the phone idle. Optional settings are 15, and 30 Seconds
and Always On (this setting uses much more power than the
timed settings) and Always Off
.
1. At the Settings menu, select Display Settings ➔ Banner.
7,
The Banner text entry screen appears in the display.
.
Note: If necessary, press and hold the
key to erase an existing banner.
Brightness — Use the Navigation key to select between any of 5
optional settings.
2. Enter a word or short phrase (up to 12 characters) to
appear in your phone’s display while in standby mode. (For
2. Select the desired option and the preferred setting.
Front Contrast
Set the Front (Sub) LCD contrast to your preference.
1. At the Settings menu, select Display Settings ➔ Front
Contrast. The Front Contrast screen appears in the
display.
3. Press
to save the new banner.
Changing Your Settings
108
2. Use the Navigation key to adjust the contrast for the Front
Display. The results of your adjustments appear in the
display.
3. Use the Volume key (on the left side of the phone) or the
Navigation key to select a volume level (or vibration mode)
for the selected Volume option.
3. Press OK
(
) to save your new contrast setting.
4. To preview a setting, press the Play soft key. To save the
setting, press Set
(
).
Sound Settings
Ringer Type
The sound menu provides a variety of options to customize audio
properties for such things as ringers, keypad tones alerts, and
more.
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
Volume
1. At the Settings menu, select Sound Settings ➔ Ringer
Use the Volume sub-menu to set the default volume for incoming
calls and alarms, or set the phone to vibrate.
Type. The following options appear in the display:
• Voice Calls — Lets you set which ringtone or sound file plays
when you receive a voice call.
1. At the Settings menu, select Sound Settings ➔ Volume.
• Messages — Lets you set which ringtone or sound file plays when
you receive a Text Message, Picture Message, and/or Voicemail
message.
When you select Messages, the following options appear in the
display:
The following options appear in the display:
• Voice Calls — Lets you set the volume (Ringer off
Medium/Low Medium Medium/High High) and/or vibration
Vibrate or Vibrate/High) for the incoming calls ringer.
Messages — Lets you set the volume (Ringer off Low
Low Medium Medium/High High) and/or vibration (Vibrate or
Vibrate/High) for the incoming messages ringer.
Alarms — Lets you set the volume (Ringer off
Low Medium Medium/High High) and/or vibration (Vibrate or
Vibrate/High) for the alarm ringer.
2. Select a Volume option.
,
Low,
,
,
,
(
•
•
,
,
Medium/
–
–
–
–
Text Message
Pic/Video Message
Voicemail
,
,
,
,
Low, Medium/
Msg Reminder
,
,
,
2. Select the desired sub-menu.
109
The following options appear in the display:
Key Tone
• My Ringtones
• My Sounds
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
3. Select the desired option, highlight a Ringer, then press OK
1. At the Settings menu, select Sound Settings ➔ Key
(
) to save the changed Ringer setting.
Tone. The following options appear in the display:
Alerts
•
•
Tone Level (volume)
Tone Length
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
Tone Level is highlighted.
2. Select Tone Level to adjust the Key Tone volume.
1. At the Settings menu, select Sound Settings ➔ Alerts.
•
•
Use the Volume key or Navigation key to set the Key Tone volume.
Press Set ) when the desired key tone volume setting is
reached. You are returned to the Key Tone sub-menu.
(
The following Alerts sub-menus appear in the display:
•
•
•
•
•
Minute Beep — Sounds an alert ten seconds before each
elapsed minute of a call.
Roaming — Sounds an alert when you leave your home service
area.
Call Connect — When you make a call, an alert sounds when the
call is answered.
Power On/Off — Plays a melody when you turn the phone on or
off.
3. Select Tone Length, then select Short or Long. You are
returned to the Key Tone sub-menu.
Call Settings
You can use Call Settings to select how your phone handles calls,
both voice and data calls.
Call Answer
Charge Alert — Plays a melody when you connect the Travel
Adapter and when the battery is fully recharged.
You can select a specific answer mode when you receive an
incoming call.
2. Select the desired alert, then select On or Off.
Changing Your Settings
110
1. At the Settings menu, select Call Settings ➔ Call
Answer. The following Call Answer options appear in the
display:
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
1. At the Settings menu, select Call Settings ➔ Auto
•
Any Key — Press any key except
, the soft keys (
the Volume key to answer an incoming call.
), or
Answer. The following options appear in the display:
•
•
Send Key — Press
Flip Open — Open the flip or press
call.
to answer an incoming call.
•
•
Off — Disables automatic answering of calls
After 1 Second — Phone automatically answers calls after 1
second
to answer an incoming
•
•
After 3 Seconds — Phone automatically answers calls after 3
Tip: You can set your phone to answer calls automatically, without any input
seconds
After 5 Seconds — Phone automatically answers calls after 5
seconds
2. Select the method you wish to use for answering calls.
2. Select the desired setting.
Call Alert
Auto Retry
You can select how your phone notifies you that you have
received a call.
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1. At the Settings menu, select Call Settings ➔ Call Alert.
The following options appear in the display:
1. At the Settings menu, select Call Settings ➔ Auto Retry.
The Auto Retry sub-menu with the following options
appears in the display:
• Ring Only — Only the ringtone sounds.
• Caller ID + Ring — Displays Caller ID information and plays the
ringtone.
• Name Repeat — Contacts calls only — Displays a calling
Contact’s name repeatedly.
•
•
Off — Disables automatic redialing of numbers
Every 10 Seconds — Phone automatically redials a number
every 10 seconds
2. Select the desired Call Alert setting.
111
•
•
Every 30 Seconds — Phone automatically redials a number
every 30 seconds
Every 60 Seconds — Phone automatically redials a number
every 60 seconds
• TTY + Talk — Enables TTY mode and microphone
• TTY + Hear — Enables TTY mode and earpiece
• TTY Off — Disables TTY mode
4. Select the desired setting.
2. Select the desired setting.
Note: The TTY icon (
) appears in the top of the display.
TTY Mode
Voice Privacy
Your phone is fully TTY compatible. TTY equipment is connected
to your phone through the headset connector on the left side of
the phone. TTY must be enabled before you can use your phone
with a TTY device.
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1. At the Settings menu, select Call Settings ➔ Voice
1. At the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to change the
current TTY Mode setting.
Privacy. The following options appear in the display:
•
•
Standard — Voice privacy is disabled
Enhanced — Voice privacy is enabled
2. Select the Voice Privacy setting of your choice.
Note: The “Enabling TTY May Impair Headset Use and Non-TTY
Accessory Performance.” message pops up when you select TTY
Mode.
Phone Settings
Airplane Mode
2. To access the TTY Mode options, select Yes.
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the Camera-Camcorder and the Tools) safely in sensitive
environments, such as on board an aircraft.
To return to the Call Settings sub-menu, select No.
3. When you select Yes, the following options appear in the
display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece
1. At the Settings menu, select Phone Settings ➔ Airplane
Changing Your Settings
112
Mode.The following options appear in the display:
Security
•
•
On — Disables the radio transmitter and receiver in your phone.
Off — Enables the radio transmitter and receiver in your phone.
Use the Security menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, as well
as other security options.
2. Select the desired option. You are prompted to confirm
Lock Phone
your setting change.
•
When you select On, the “Will disable all incoming and outgoing
call?” prompt appears in the display.
When you select Off, the “Will enable all incoming and outgoing
call?” prompt appears in the display.
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
•
3. Press the Yes soft key to apply your selection, display/
remove the Airplane Mode icon ( ) and/or
), and return to standby mode.
No Service icon (
1. At the Settings menu, select Phone Settings ➔ Security.
Press the No soft key to make another selection.
You’re prompted to enter the lock code.
Language
Note: The default lock code is the last four digits of your telephone number.
The Language option on your phone can change the language of
voice prompts, menus, and key-input.
2. Enter the lock code, then select Lock Phone.
1. At the Settings menu, select Phone Settings ➔
The following Device Lock Mode options appear in the
display:
Language. The following options appear in the display:
•
•
English
Español
•
Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
2. Select the preferred language.
•
Unlock — Unlocks the phone.
113
Emergency #
•
On Power Up — The phone locks automatically the next time your
phone is powered ON. (The phone stays locked until you enter the
lock code.)
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
3. Select the desired Device Lock Mode.
Change Lock Code
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
1. At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, then select Change Lock Code.
You’re prompted to enter the New Lock Code.
3. Enter the New Lock Code. You’re prompted to re-enter the
Important!: DO NOT depend on this phone as a primary method of calling
New Lock Code for verification.
911 or for any other essential or emergency communications.
4. Enter the New Lock Code again. Your changes are stored.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Store Emergency Numbers
1. At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Changing Your Settings
114
3. To reset your Settings to default values, press the Yes soft
Note: The default lock code is the last four digits of your telephone number.
key.
2. Enter the lock code, then select Emergency #.
3. Select one of the three emergency number entries.
4. Enter an emergency number (up to 32 digits in length).
To keep your current Settings and return to the Security
sub-menu, press the No soft key.
Erase All Contacts
Erase All Contacts erases your Contacts list entries and My
Images photos. This feature is useful if you want to give your
phone to someone else.
5. Press OK
(
) to save the number you entered.
Call Emergency Numbers in Lock Mode
1. In standby mode with the phone locked, enter the
emergency number.
1. At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
2. Press
to place the call.
Note: The default lock code is the last four digits of your telephone number.
Resetting Your Phone
2. Enter the lock code, then select Erase All Contacts. You
Reset Phone returns all Settings options to their factory default.
1. At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
are prompted to enter the lock code a second time.
Note: The default lock code is the last four digits of your telephone number.
Note: The default lock code is the last four digits of your telephone number.
3. You are prompted to confirm erasure of all entries.
2. Enter the lock code, then select Reset Phone. You are
prompted to confirm that you wish to reset your phone’s
Settings to default values (except for your Contacts list and
Voice Dial).
4. To erase all entries, Press the Yes soft key. To keep your
Contacts entries and return to the Security sub-menu,
press the No soft key.
115
Restrictions
Select. The following roaming options appear in the
display:
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and access to your Contacts.
•
Home Only — Your phone is available for normal operation only
within your designated coverage area.
1. At the Settings menu, select Phone Settings ➔ Security.
•
Automatic — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Select the desired roaming option. You setting is saved,
and you are returned to the Phone Settings menu.
2. Enter the lock code, then select Restrictions. The
following options appear in the display:
Set Time
• Outgoings — Blocks/allows all outgoing calls.
• Incomings — Blocks/allows all incoming calls.
• Contacts — Blocks/allows all access to Contacts list entries.
Use the Set Time option to set the current date and time while in
3. Select the desired Restriction. The following settings
appear in the display:
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
•
•
On — Enable the selected Restriction.
Off — Disable the selected Restriction.
1. At the Settings menu, select Phone Settings ➔ Set Time.
4. Select the desired setting.
The following options appear in the display:
System Select
•
•
Set Date
Set Time
The System Select menu allows you to select the roaming
setting for your phone.
2. Select the desired option.
1. At the Settings menu, select Phone Settings ➔ System
•
For Set Date, the Set Date screen appears in the display.
Changing Your Settings
116
–
–
Enter the current date in mm/dd/yyyy format using your keypad.
The month and day entries require two digits each. The year must be
entered using all four digits.
For example, to search for “Inbox” you would enter:
Press
to save your Date setting.
I
N
B
O
X
•
For Set Time, the Set Time screen appears in the display.
–
Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12-
hour format.
2. Press the Down navigation key. The Menu List screen
appears in the display showing a list of menu items that
match your entry.
–
–
Highlight the time-of-day setting (AM/PM) field.
Use the Left/Right navigation keys to select AM or PM. [You can also
3. Select the desired menu item to access the content of the
press
(for AM) or
(for PM).]
menu item.
–
Press
to save the your Time setting.
Quick Search
Tip: If the menu item you are searching for does not appear in the Menu List
screen, try expanding your search by pressing the
the last digit of your entry.
key to delete
Quick Search is an easy way to locate Menu items and Contacts.
1. At the Settings menu, select Phone Settings ➔ Quick
Search. The following options appear in the display:
Searching for a Contact
1. In standby mode, press the first few numeric keys that
•
•
On — Quick Search is enabled
Off — Quick Search is disabled
correspond to the letters of the contacts name.
2. Use the Navigation key to highlight the desired Quick
For example, to search for “Sally” you would enter:
Search option, then press the key to save your setting.
Searching for a Menu Item
S
A
L
L
Y
1. In standby mode, press the first few numeric keys that
correspond to the letters of the Menu item name.
117
2. Press the Up navigation key. The Find screen appears in
the display showing a list of Contact names that match
your entry.
Options ➔ Images / Videos. The following storage options
appear in the display:
•
Phone Memory — Saves the selected type of files in your
phone’s memory.
3. Highlight the desired Contact, then press
to call the
•
Card Memory — Saves the selected type of files in a removable
microSD memory card.
highlighted Contact.
2. Select the desired storage location. “Save Options set
”
Memory Manager
Memory Manager lets you quickly and easily review and
manage your phone memory usage. To access Memory
Manager, do the following:
appears in the display, and you are returned to the Save
Options menu.
Phone Memory
1. At the Settings menu, select Memory Manager. The
Lets you review your phone’s available memory and manage your
files stored there.
following options appear in the display:
•
•
•
Save Options — Lets you specify whether your images and
videos will be stored in your phone or on an optional Memory Card.
Phone Memory — Lets you review your phone’s available
memory and manage your files stored there.
Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
Card Memory
Card Memory lets you review a removable, microSD Memory
Card’s available memory, manage your files stored there, and
format new microSD Memory Cards.
Memory Usage
Memory Usage lets you review your usage of your Memory
Card.
Save Options
Lets you specify where you want your Images and Videos stored.
To access Save Options, do the following:
1. At the Settings menu, select Memory Manager ➔
Phone / Card Memory ➔ Memory Usage.
1. At the Settings menu, select Memory Manager ➔ Save
Changing Your Settings
118
The Memory Usage screen appears in the display
• My Ringtones
• My Sounds
showing the following information:
•
•
My Music (Card Memory only)
Format Card (Card Memory only)
•
•
•
•
•
•
•
•
•
Total Used memory usage
Available unused memory
My Images memory usage
My Videos memory usage
My Ringtones memory usage
2. Select the desired folder. A list of all files in the folder
appears in the display.
Files are listed by name, and each file entry shows the
name and size of each file.
My Sound(s) memory usage
My Music memory usage (Card Memory only)
Applications memory usage (Phone Memory only)
Pic/Video Msg memory usage (Phone Memory only)
3. To erase Image, Video, or Music files, do the following:
•
Press the Erase soft key. The Erase Pictures
screen appears in the display.
/Videos/Music
2. Press
to return to the Phone / Card Memory menu.
•
Highlight an Image/Video/Music file you want to erase, then press
to mark the file for erasure. (Press the MarkAll soft key to
mark all Image/Video/Music files for erasure.)
Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
Freeing Memory
Phone Memory / Card Memory sub-menus let you list files in
your multimedia folders and let you erase or move files as
needed to free up space on your phone or Memory Card for
reuse.
•
•
1. At the Settings menu, select Memory Manager ➔ Card
Memory. The Card Memory screen appears in the display
listing the following options:
4. To move Image or Video files to the phone, do the
following:
•
Press the Options soft key. The following options appear in the
display:
•
•
•
Memory Usage
My Images
My Videos
–
Move
–
Sort
119
•
•
•
•
Select Move. The Move Pictures
/
Videos screen appears in the
1. At the Settings menu, select Memory Manager ➔ Card
display.
Memory ➔ Format Card.
Highlight a file you want to move, then press to mark the file for
moving. (Press the Mark All soft key to mark all files for moving.)
Press the Done soft key. You are prompted to confirm moving the
selected file(s) to the phone.
Press the Yes soft key to move all marked files or press the No soft
key to return to the Move screen.
You are prompted to confirm formatting of the Memory
Card.
2. Press the Yes soft key to format the Memory Card or press
the No soft key to return to the Card Memory screen.
5. Press
to return to the My Images / Music sub-menu.
Phone Info
Press
to return to standby mode.
Phone Info options let you identify important information about
your phone, such as the hardware and software versions of your
phone, the meanings of your phones status icons, and the phone
number assigned to your phone.
6. To sort Image, Video, or Music files, do the following:
•
•
Press the Options soft key. The following options appear in the
display:
–
Move
Phone Number
–
Sort
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
Select Sort. The following options pop-up in the display.
–
–
–
By Date
By Name
By Size
1. At the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by your Wireless
Provider appears in the display.
Select the desired Sort option.
Formatting a Memory Card
Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone. To format a Memory Card, do the following:
2. Press
to return to the Phone Info menu.
Changing Your Settings
120
Icon Glossary
The ESN/MEID information displays in Dec and Hex.
2. Press to return to the Phone Info menu.
This option causes the ICON GLOSSARY list to appear in the
display and show the icons that can appear in the display and the
names of the icons.
Warranty Date Code
The device provides a customer warranty date code. The code
(date MM/DD/YYYY and time HH:MM) is populated into the device
after 10 minutes of CDMA usage time. This Date Code value may
be used to determine the device warranty status.
1. At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
of the display shows in the display.
2. Press
to return to the Phone Info menu.
You can view the Warranty data code for your phone.
ᮣ
At the Settings menu, select Phone Info ➔ Warranty Date
Code
Version
.
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
The Warranty Date Code information appears in the
display.
1. At the Settings menu, select Phone Info ➔ Version.
Refurbish
Your phone’s hardware and software version information
appears in the display.
Shows when and the number of times your phone has been
refurbished.
2. Press
to return to the Phone Info menu.
ᮣ
At the Settings menu, select Phone Info ➔ Refurbish.
ESN / MEID
The date and time your phone was last refurbished and the
number of times your phone has been refurbished appears
in the display.
You can view the ESN (Electronic Serial Number)/MEID (Mobile
Equipment Identifier) values for your phone in both Decimal and
Hex values from this menu.
1. At the Settings menu, select Phone Info ➔ ESN/MEID.
121
Section 15: Health and Safety Information
Thissectionoutlinesthesafetyprecautionsassociatedwithusing
yourphone.Thesesafetyprecautionsshouldbefollowedtosafely
use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
122
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
•
•
Head: 1.050 W/Kg.
Body-worn: 0.851 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
123
Do wireless phones pose a health hazard?
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information
124
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
125
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
Health and Safety Information
126
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
127
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
Health and Safety Information
128
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
National Radiation Protection Board (UK):
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
129
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Health and Safety Information
130
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
131
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: [email protected]
You can obtain additional information on this subject from the
following sources:
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
200 Independence Ave., SW
Washington, DC 20201
Voice: (800) 222-2336
Voice: 1-800-35-NIOSH (1-800-356-4647)
Email: [email protected]
Internet: http://www.audiology.org
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Health and Safety Information
132
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
UsingYourPhoneNearOtherElectronicDevices
For more information see:
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
133
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
T3
+
T2
=
5
M3
+
M2
=
5
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
Health and Safety Information
134
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Vehicles
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Emergency Calls
Switch your phone off in any facility where posted notices require
you to do so.
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
135
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
To make an emergency call:
1. If the phone is not on, switch it on.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Health and Safety Information
136
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
If you're inside a building, being near a window may give you
better reception.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Understanding the Power Save Feature
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Understanding How Your Phone Operates
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
137
Maintaining Your Phone's Peak Performance
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
Battery Standby and Talk Time
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
Battery Precautions
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Health and Safety Information
138
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
•
•
If left unused, a fully charged battery will discharge itself over time.
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
139
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
140
Section 16: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
141
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
142
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
143
Precautions for Transfer and Disposal
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information
144
Index
Camera
Brightness 75
A
C
Call Functions
Adjust
Options 65
B
Zoom 75
Camera Options
Resolution 66
Card Memory
Battery 6
Making a Call — Number Entry
Dialing 18
Charging 4
Making a Call — Speed
Removal 6
Bluetooth 88
Connecting 90
Settings 90
Formatting 120
Camcorder
Options 71
Management 118
Open 35
Creating and Sending New Messages
Browser 57
145
D
Backlight 108
F
G
L
M
Banner 108
Gallery
MEID 121
Wallpaper 106
Photo 76
Video 77
Memo Pad
Memory Card
Formatting 120
Getting Started
Voicemail 7
Memory Card (Optional)
Install 8
E
Emergency Calls 18
Entering Text
Inbox 52
Outbox 53
H
HAC 133
Entering Upper and Lower Case
Letters 33
ESN 121
I
K
Voicemail 55
Messaging
146
microSD
Formatting 120
microSDTM 8
Mode
Calendar 90
Q
Quality
Camcorder 74
Camera 69
Phone Info
camera 17
input 15
lock 15
silent 16
standby 15
talk 16
vibrate 16
M-Ratings 134
ESN/MEID 121
Version 121
Phone Memory
Freeing 119
Language 113
R
Roaming 28
S
Restrictions 116
N
P
Photos
Personal Organizer
Sending 77
Calculator 95
147
Settings
Alerts 110
Backlight 108
Restrictions 116
Security 113
Sound 109
Theme 107
Voicemail 51
Volume/Vibrate 109
Wallpaper 106
Silent mode
Alerts 110
Volume/Vibrate 109
Standard Limited Warranty 141
T
Banner 108
Call 110
Call Alert 111
Display 105
Tools/Utilities
Language 113
Location 105
entering 16
exiting 16
148
|