P O R T A B L E
M O B I L E
T R I - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its
affiliates in the United States and/or other countries.
®
Openwave is a registered Trademark of Openwave, Inc.
®
RSA is a registered Trademark RSA Security, Inc.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open
source licenses, please visit:
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
1
FCC Hearing Aid Compatibility (HAC) Regulations
2
3
Section 1: Getting Started
This section explains how to start using your phone by activating
your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 106.
•
•
•
Notes: Explain alternative options within the current feature, menu, or
sub-menu.
Tips: Provide quick or innovative methods for performing functions
related to the subject at hand.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 75.
Important: Points out important information about the current feature
that could affect performance, or even damage your phone.
Getting Started
4
Text Conventions
Battery
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Your phone is powered by a rechargeable, standard Li-Ion
battery. A USB cable and Charging Head are included with the
phone, for charging the battery.
highlight Use the Navigation Key
(
) to move a highlighting
Note: The battery comes partially charged. You must fully charge the battery
before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
After the first charge, you can use the phone while charging.
press the Center Select Key
(
) to launch, access,
or save a highlighted menu item or screen field of
interest.
Warning!: Use only Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Using
other accessories may invalidate your warranty and may cause
damage.
➔
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
5
Installing the battery cover
Battery Cover
ᮣ
Align the cover and slide it into place, making sure it snaps
securely at all four corners.
The battery is under a removable cover on the back of the phone.
Removing the battery cover
ᮣ
Press down on the top of the cover and on the arrow at the
bottom of the cover, while sliding the cover off in the
direction of the arrow.
Getting Started
6
Installing the Battery
Removing the Battery
2. Insert the top end of the battery into the phone housing,
aligning the gold contacts on the battery with the gold
contacts in the phone. Push down on the bottom of the
battery down until it snaps into place.
2. Lift the battery up by the slot provided.
3. Lift the battery up and out of the phone.
3. Install the battery cover.
7
Charging the Battery
2. Insert the USB cable into the port at the base of the device.
Your phone comes with a USB cable and charging head to rapidly
charge your phone from any 120/220 VAC outlet.
Note: The battery comes partially charged. You must fully charge the battery
before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
After the first charge, you can use the phone while charging.
1. Connect the USB cable to the charging head.
Charging Head
3. Plug the charging head into a standard AC power outlet.
USB Cable
4. When charging is complete, the indicator on the charging
head turns green. Unplug the charging head from the
power outlet and remove the USB cable from the phone.
A
L I N K C A B L E
T
A
D
Important!:
Incorrect
Getting Started
8
Battery indicator
Activating Your Phone
The battery indicator
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
(
) in the upper-right corner of the
Contact your Wireless Provider and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
•
•
•
Five bars
(
)
indicate a full charge.
Warning!: Your touch screen responds best to a light touch from the pad of
your finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
An empty battery icon (
) indicates a near empty battery.
A blinking empty battery icon (
you have two to three minutes before the battery is too low to operate
the phone.
) and a tone sounding indicate
Turning Your Phone On
If you continue to operate the phone without charging, the phone
will power off.
ᮣ
Press and hold End
(
) until the display lights.
Note: As with any other radio-transmitting device, do not touch the antenna
while using your phone as this can affect call quality and can cause the
phone to operate at a higher power level than is necessary.
Turn Your Phone Off
ᮣ
Press and hold End
(
) for two or more seconds. Your
phone powers off.
9
Voicemail
Memory Card
Setting Up Your Voicemail
Your phone supports optional, removable microSD™ memory
cards of up to 16GB capacity (not included). You can store music,
pictures, and other files on a memory card.
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Installing a Memory Card
1. Pull the memory card cover out and turn it to expose the
card slot.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Messages menu) to view details of voice
messages in your Voicemail box.
1. In standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
1. In standby mode, press and hold
or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting.
2. You are prompted to enter your password.
Incorrect
2. Push the memory card into the slot until it locks into place.
Getting Started
10
Removing a Memory Card
1. Pull the memory card cover out and turn it to expose the
memory card in the card slot.
2. Press on the memory card to release the lock, then remove
the card.
Formatting
Formatting erases all content from the memory card and
prepares it for use with your phone.
Formatting a Memory Card using Your Phone
1. In standby mode, press Menu (
Memory Info Card Memory
2. At the prompt, press Yes
)
➔
Settings
Format Card
, then press the OK
➔
➔
➔
➔
.
(
)
(
) .
Formatting a Memory Card using Your PC
3. For best playback of songs stored on a microSD™
memory card, use the PC file system FAT32. Consult your
PC and/or memory card reader documentation for
information about formatting memory cards.
11
Section 2: Understanding Your Phone
This section outlines some key features of your Samsung
Freeform II phone. It also describes the screen format.
Your Phone’s Features
Domestic and international voice and text messaging service (available
on participating networks).
•
•
•
•
•
•
•
•
•
•
•
•
Large 2.2 inch (diagonally) color screen (220 x 176 pixel resolution)
High speed data (CDMA 2000 1x Technology)
®
Bluetooth Wireless Technology (see Note)
Global Positioning System (GPS) Technology
Digital Assistant Tools
QWERTY Keypad
Text (SMS), Picture (MMS), Email, and Instant (IM) Messaging
Built-in 1.3 Megapixel Digital Camera
Voice Dial
Music Player (requires an optional Memory Card)
Memory Card Slot (microSD™ and microSDHC™ up to 16 Gb)
Note: The Freeform II phone supports the wireless headset, hands-free,
A2DP, phonebook access, file transfer, and object push profiles for
Bluetooth® wireless technology.
Understanding Your Phone
12
3. Left Soft Key: Press to the command displayed at the left
Front Views of Your Phone
of the bottom line of the display.
4. Send Key: Press to place or receive a call. Press in standby
1
mode to launch the Recent Calls list.
5. Speakerphone Key: Press and hold to enable/disable
2
speakerphone.
6. Center Select Key: Press to select the command displayed
at the center of the bottom line of the display.
10
7. Back Key: In a text entry field, press to delete characters. In
menu mode, press to return to a previous screen or menu.
3
8. End/Power Key: Ends a call. When navigating, press to
return to the Home screen. Press and hold to power the phone
On or Off. When you receive an incoming call, press to send the
call to Voicemail.
9
8
7
4
5
9. Right Soft Key: Press to select the command displayed at
6
the right of the bottom line of the display.
10. Navigation Key: In menu mode, press to scroll through the
phone menu. From standby mode, press up or down to
browse the Quick Launcher, or press left or right for
shortcuts.
Features
1. Earpiece: Allows you to hear callers and alerts.
2. Display: Displays information to operate your phone.
13
Keypad
3. Fn Key: Toggles the text input mode to let you use the
QWERTY keypad to enter numbers and symbols as well as
letters.
1
4. Sym/Lock Key: When entering text, press to launch a
Symbols screen for selecting symbols. From standby
mode, press and hold this key to lock the keypad.
10
9
2
8
5. Voice SVC Key: From standby mode, press and hold to
3
4
7
5
6
6. Space/Vibrate Mode Key: Lets you enter spaces between
words and characters. In standby mode, press and hold to
activate Vibrate mode.
7. Calendar Key: Launches you phone’s Calendar tool.
8. Messaging Key: Launches the Messages menu.
9. Enter Key: Press to move the insertion point to the next line
in a message.
Features
10. BACK Key: In text entry mode, deletes characters from the
display. In menu mode, returns you to the previous menu
or screen.
1. Voicemail Key: In standby mode, press and hold to dial
voicemail.
2. Shift Key: Toggles capitalization for text input.
Capitalization remains as selected until you press the Shift
key again.
Understanding Your Phone
14
Features
Side Views of Your Phone
1. Volume Key: In standby mode, lets you adjust the System
Volume. When receiving a call, lets you temporarily mute
the ringer.
2. microSD (Memory Card) Slot: Lets you install and remove
optional microSD Memory Card for additional image/photo
storage and for music storage.
3. Camera Key: From standby mode, lights the front display
backlight and launches the Camera feature of your phone.
In Camera mode, takes pictures.
1
2
3
15
Features
Rear View of Your Phone
1. Headset Connector: Used to connect an optional headset
1
(for hands-free operation and/or music playback) or an
optional TTY device.
2. Camera Lens: The lens of your built-in camera.
3. Power/USB Connector: Used to connect charging
4
2
accessories or optional USB Data cable to your phone.
4. Speaker: Reproduces music and other sounds played by
your phone.
3
Understanding Your Phone
16
Send Key
Command Keys
Left Soft Key
The Send Key
(
) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
Some functions of the Left Soft Key
(
) are as follows:
•
•
When receiving a call, press the Send Key once to answer the call.
In standby mode, enter a number and press the Send Key to make a
call.
•
•
In standby mode, press the left soft key to open the Main Menu.
In text input fields, press the Left soft key to select the text input
method.
•
•
•
In standby mode, press the Send Key to display the All Calls list of
calls to and from your phone.
Right Soft Key
Some functions of the Right Soft Key
(
) are as follows:
Press the Send Key twice in standby mode to call the most recent
number.
•
From the standby mode, press the Right Soft Key functionContacts to
open your Contacts list.
With two active calls, press the Send Key to pick up a waiting call.
Press the Send Key again to switch back to the original call.
•
When the Right Soft Key function is Options, press to choose options
for the current item.
Volume Key
Center Select Key
Use the Volume Key
(
) to adjust volume:
Some functions of the Center Select Key
(
) are:
•
•
In standby mode, press the Volume Key to adjust Master Volume.
In standby mode, press and hold the Volume Key down to activate
Sounds Off.
•
•
•
In a list, press the Center Select Key to view, select, launch, or play a
highlighted item.
In a menu, press the Center Select Key to accept the highlighted
selection.
•
•
•
During calls, press the Volume Key to adjust voice volume.
During music playback, press the Volume Key to adjust audio volume.
Press the Volume Key to mute the ringtone of an incoming call.
In camera mode, press the Center Select Key to take a photo.
17
BACK Key
Camera Key
ᮣ
In standby mode, press and hold the Camera Key
located on the right side of your phone.
When in camera mode, pressing the Camera Key takes a
picture.
(
)
The Back Key
(
) is used to return to a previous menu or
screen. In some screens, you can also use the key to erase or
clear numbers, text, or symbols from the display.
•
Press the Back Key to back up one menu level.
Shift Key
Del Key
ᮣ
When in a text entry field, press the Shift Key
(
)
to
The Delete Key
symbols from the display.
(
) is used to erase or clear numbers, text, or
switch between Abc (initial case), ABC (upper case), and
abc (lower case) modes. Press twice quickly to lock ABC
mode, then press again to unlock.
•
If you enter an incorrect character, briefly press
delete) the character.
to backspace (and
Fn Key
•
To erase the entire sentence, press and hold
.
•
While in input mode, the Fn (Function) Key
input modes between Abc and 123/Sym
While in standby mode, press and hold the Fn (Function) key to
(
) lets you toggle text
End Key
.
•
•
•
Press and hold the End Key
Briefly press to disconnect a call.
to return to standby mode from any menu, or to cancel the
(
) to turn your phone on or off.
•
activate/deactivate Vibrate Mode.
Press
last input.
Understanding Your Phone
18
Using Menu Shortcuts
Navigation Key
In standby mode, press the Navigation key up or down to launch
the corresponding applications in the pattern shown here.
Use menu shortcuts to quickly access menus and sub-menus.
From a numbered menu, press the number to the left of the
menu label to jump to the desired menu, sub-menu, or feature.
Shortcut Bar
Example: To access the Games & Apps sub-menu: Press the right soft key
Menu
➔
Games & Apps
➔
for Games & Apps.
Browser
Messages
Using Shortcut Icons
You can also access menus and sub-menus using Shortcut Icons,
and without the menu-based drill down.
Shortcut Bar
ᮣ
In standby mode, press the Navigation Key up or down to
highlight the desired shortcut icon and press OK to launch
the related application.
• Press the Navigation key up or down to display the Quick
Launcher menu (if not displayed) and highlight the previous/
next Shortcut icon.
Spacebar/Vibrate Mode Key
Menu Navigation
• In standby mode, press and hold the Spacebar/Vibration Key
(
)
Access the menus and sub-menus in your phone using the
Navigation key and soft keys or use a shortcut.
on the QWERTY keyboard to activate or deactivate Vibrate Only mode.
In a text entry field press the Spacebar/Vibration Key to insert a space
between character or words.
•
1. In standby mode, press the right soft key Menu. The Main
Menu (the first of several menus) appears in the display.
Calendar Key
2. Use the Navigation key to browse through the menus.
ᮣ
In standby mode, press the Calendar Key
QWERTY keyboard to quickly open Calendar function.
(
)
on the
3. Press OK
appearsin the display.
4. Press to return to the previous menu.
(
)
to enter the menu or sub-menu that
19
Message Key
Dialogue Boxes
ᮣ
In standby mode, press the Message Key
QWERTY keyboard to quickly open the Messages menu.
(
)
on the
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
Voice Command Key
•
•
•
•
•
•
•
Choice
ᮣ
In standby mode, press and hold the Voice Command Key
to activate the Voice recognition feature.
–
Example: “Save Message?”
(
)
Reconfirm
Speakerphone Key
–
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
ᮣ
In standby mode, press the Speakerphone Key
switch between the earpiece and the speakerphone,
before or during a call.
(
) to
–
Lock/Symbol Key
In standby mode, press and hold the Lock/Symbol Key
or unlock the keypad.
–
•
(
) to lock
–
•
When in a text entry field press the Lock/Symbol Key to enter
symbols. Press the Navigation key left or right to scroll through the
symbols.
–
Example: “System Error!”
Warning
–
Example: “Low Battery,” “Memory Full!”
Understanding Your Phone
20
Section 3: Home Display
1. Annuciator Line: The top line of your phone’s display
contains icons that indicate network status, battery power,
signal strength, and more.
Understanding the Display Screen
1
2
2. Shortcut Bar: Allows quick access to web base application.
3. Left Soft Key Function: The bottom line of the display shows
current soft key function. The sample screen shows that
pressing the Left Soft Key (Menu) will display the Main
Menu
4. Clock Display: Displays the day, date and time.
5. Right Soft Key Functions: The bottom line of the display
shows current soft key functions. The sample screen
shows that pressing pressing the Right Soft Key
(Contacts) will show the Contacts-Find screen.
Display Screen Icons
3
5
4
Your phone can show you definitions of the icons that appear on
the top line of the display.
To access the Icon Glossary:
ᮣ
In standby mode, press Menu (
Phone Info Icon Glossary. A list appears showing the
icons that can appear on the top line of the displays.
)
➔
Settings
➔
➔
21
Shortcut Bar
Weather: Displays the current weather.
Weblinks: Displays links to popular sites.
Horoscope:Displays daily horoscopes.
News:Displays news topics.
Mocospace:Mobilecommunitywhereyoucanmeetpeople,
chat, share pics and videos and play games on your cell
phone.
Local Search: Search for local businesess or resturants.
Personalize:Configure widgets or download widgets.
My Account: Displays information about your Cricket
account.
Storefront: Purchase Ringback Tones, Graphics, Widgets,
Tones or Games & Apps.
Home Display
22
Section 4: Entering Text
Entering Text
Your phone has a QWERTY keypad to support quick and easy text
input. You can enter text as you would when using a computer
keyboard.
While in a text entry field press Symbols to enter special
characters. Press the Navigation key left or right to scroll
through symbols. Press Symbols to exit and return to the
previous screen.
The keys are labeled with a letter on the lower half and a number
or symbol on the upper half. Press the key corresponding to the
character you want to enter. Enter text by pressing the
appropriate keys on the QWERTY keyboard.
When in a text entry field press the Left Soft Key
to display the following:
Entry Mode
•
T9 Word: T9 Word is a predictive text entry mode that recognizes
common words matching the sequence of your key presses and
inserts the most common word into your text. T9 Word requires only
one key press per letter of the word, and is much faster than traditional
text entry.
Use these keys to enter special characters:
Backspace: Press to delete the previous character.
Press and hold to delete the previous word.
•
•
Abc: Abc mode is standard text entry mode for mobile telephones, and
is the default text entry mode when using the external keypad.
123/Sym: Use 123 mode to enter numbers into a text field.
Enter: Press to move to the next line of text.
Shift: Press to switch between Abc (initial case), ABC
(upper case), and abc (lower case) modes. Press
twice quickly to lock ABC mode, then press again to
unlock.
Space: Press to insert a space.
Function:Press tocyclethroughtextentrymodesabc
or 123/SYM.
23
•
Symbols: Use Symbols mode to enter common symbols into a text
field.
Note: To enter, press the key for the number corresponding to a symbol.
Shortcuts: Use shortcut to quickly enter a domain name.
Note: To enter, press the key for the number corresponding to a shortcut.
•
•
Emoticons: Use Emoticons mode to enter smiley symbols into a text
field.
Note: To enter, press the key for the number corresponding to a emoticon.
Entering Text
24
Section 5: Call Functions
This section provides procedures for making and answering
calls. This section also describes features, such as call logs and
call timers, that help you make calls and manage your call time.
Manual Pause Calling
To manually call a number with pause(s) without storing it in your
Contacts list:
Making a Call
1. In standby mode, enter the number you wish to call.
1. With the phone on, enter the number you wish to call using
2. Press Options
(
). The following options appear in the
the keypad.
display:
2. Press Send
(
) to place the call.
• 2-Sec Pause: A 2-second pause after which dialing resumes.
Wait: A hard pause (waits for input from you).
Three-way Calling
•
3. Highlight and press the Center Select Key
(
) to select
Call two other numbers and connect them to your call using
three-way calling.
the desired option.
4. Press Send
(
) to call the number.
1. In standby mode, enter the number for the first party in
your call, then press Send
2. When connected, ask the other party to remain on the line.
Press Send ) to place them on hold.
3. Enter the second party’s phone number and press Send
).
(
).
Tip: Press Save to store pauses along with the number if you plan to call the
number frequently.
(
(
4. When the second party answers, press Send
(
) to
connect all three parties.
25
3-Touch Dialing
Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
2. Press the number key representing the second digit of the
desired Contact’s speed dial number.
ᮣ
In standby mode, press and hold the number key
3. Press and hold the number key representing the third digit
corresponding to the desired Contact’s speed dial number.
of the desired Contact’s speed dial number.
2-Touch Dialing
Answering a Call
Use 2-touch dialing to speed dial Contacts from 10 through 99.
ᮣ
Press Send
(
) to answer an incoming call.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2. Press and hold the number key representing the second
Sending Calls to Voicemail
digit of the desired Contact’s speed dial number.
Use one of these methods to ignoring an incoming call and send
it directly to voicemail:
•
Press Ignore
(
)
to send the call to voicemail.
Tip: To silence the ringer on an incoming call, press Quiet (
the down on the Volume key ) .
), or press
(
Call Functions
26
Answering Call-Waiting Calls
Voice Commands
When you receive a call while on a call:
Voice Commands is advanced speech recognition software that
recognizes your spoken commands to dial phone numbers,
create messages, and launch phone features such as Contacts,
Calendar and My Music.
•
Press Send
call.
(
)
to place the first call on hold and answer the new
•
Press Send
(
)
again to return to the first call.
To use Voice Commands, speak naturally into your phone, at a
distance of 3-12 inches. There is no need to “train” Voice
Commands, it is designed to recognize natural speech.
Call In-Progress Options
You can access menus and features while in a call:
ᮣ
Press Options
(
) for these options.
ᮣ
In standby mode, press and hold Voice Commands
(
).
• Messages: Display the Messages menu.
• Contacts: Diplay the Contacts menu.
• Recent Calls: View Recent Calls log.
Note: At each step, Voice Commands displays a list of available commands.
If Voice Commands does not recognize your command, it will prompt
you to confirm.
• Send DTMF: Send your phone number as DTMF tones to the other
person on the call.
• Location: Turn your GPS location or set GPS location for emergency
calls only.
Tip: Press the Right Soft Key
Help at any time to display helpful tips for
using Voice Commands.
ᮣ
To control whether the other caller can hear you, press the
The following is a list of functions that you can perform with
Voice Commands:
Mute
/
Unmute
(
).
•
Call <Name or Number>: Place a call to a saved contact, to a
telephone number, or to voicemail.
•
Send Text <Name or Number>: Create a text message to a saved
contact, or to a telephone number.
27
•
Send Picture <Name or Number>: Create a picture message to a
saved contact, or to a telephone number.
Send Text <Name or Number>
Create a new message by speaking the type of message and the
recipient(s).
•
•
•
Lookup <Name>: Search for items in your phone’s memory.
Go To <Menu>: Open any application installed on your device.
Check <Item>: View details about your phone’s status
1. In standby mode, press and hold Voice Commands
(
).
The audio prompt “Please say a command.”sounds and the
Call <Name or Number>
Voice Commands display.
Place a call by speaking a contact name or telephone number.
2. Say “Send Text”.
1. In standby mode, press and hold Voice Commands
(
).
3. At the prompt, say the contact name, telephone number, or
The audio prompt “Please say a command.”sounds and the
contact group.
Voice Commands display.
4. The new message opens, with the To: field populated with
2. Say “Call”, followed by:
your selection(s). Continue creating the message.
•
“< A Contact Name>”, to call the default telephone number for a
contact. Or, say “Call”, followed by the type of number, Mobile 1,
Home, or Business.
•
•
“<Telephone Number>” to dial phone number.
“Voicemail” to access voicemail.
3. Follow the prompts to confirm your selection and place the
call.
Call Functions
28
Send Picture <Name or Number>
Go To <Menu>
Create a new message by speaking the type of message and the
recipient(s).
Access a menu item by speaking the menu’s name.
1. In standby mode, press and hold Voice Commands
(
).
1. In standby mode, press and hold Voice Commands
(
).
The audio prompt “Please say a command.”sounds and the
The audio prompt “Please say a command.”sounds and the
Voice Commands display.
Voice Commands display.
2. Say “Go to”, followed by the name of a menu item, for
2. Say “Send Picture”.
example, “Contacts”, “Recent Calls“, “Messaging“,
3. At the prompt, say the contact name, telephone number, or
“
Multimedia“, “Settings”, “Navigator”, “Tools“, “Browser“,
contact group.
or “Games & Apps“. The item opens.
4. The new message opens, with the To: field populated with
your selection(s). Continue creating the message.
Look Up
Search for information on your phone by saying the name of the
searched item.
1. In standby mode, press and hold Voice Commands
(
).
The audio prompt “Please say a command.”sounds and the
Voice Commands display.
2. Say "Look up".
3. Say the name of the item to be search, and follow the
Voice Commands prompts.
29
Check <Item>
Voice Commands Settings
Access device information by speaking the command.
Configure the Voice Commands feature of your phone.
1. In standby mode, press and hold Voice Commands
(
).
1. In standby mode, press Menu (
Voice SVC Voice Settings
2. Select a setting for customization:
)
➔
Tools
➔
The audio prompt “Please say a command.”sounds and the
➔
.
Voice Commands display.
2. Say “Check”, followed by a command:
• Choice Lists: When voice recognition is not confident it has
recognized a name or number correctly, it will show you a list of up
to three choices.
• Status: Displays and announces all phone status indicators.
• Signal Strength: Displays and announces the current 1x signal
strength level.
• Sensitivity: Controls how voice recognition determines when a
spoken word is a match. If you frequently experience the
messages “Please repeat...” or “No Match Found,” adjust the
sensitivity.
• Coverage: Displays coverage status.
• Battery: Displays and announces the current battery level.
• My Phone #: Displays and announces your phone number.
• Digit Dialing:Use the Digit Dialing menu to adapt digit dialing to
your voice.
• Sound: Set sounds for voice command features.
• Voice Launch: Select the method for launching Voice Commands.
–
–
Choose Voice Key Only to launch with the Voice Commands key.
Choose Voice Key/Ear Mic to launch with the Voice Commands key,
OR with headset controls when you attach an optional headset.
• About: View information about Voice Commands.
Call Functions
30
Section 6: Recent Calls
The Recent Calls menu retains information about Outgoing,
Incoming, and Missed calls. You can also view times for your last
call and the time totals for all calls.
Creating or Updating Contacts Using Recent
Calls
1. In standby mode, press Menu (
)
➔
Recent Calls
Accessing Recent Calls
.
ᮣ
In standby mode, press Menu (
)
➔
Recent Calls
– or –
.
In standby mode, press Send
2. Find a call from Outgoing Calls
Calls, or All Calls
3. Highlight a call record, then press Options
4. Use the Directional Keys to highlight Create New or Update
(
).
– or –
,
Incoming Calls
,
Missed
In standby mode, press Send
(
).
.
(
) ➔ Save.
Making Calls Using Recent Calls
1. In standby mode, press Menu (
Existing, then press the Center Select Key
(
).
)
➔
Recent Calls
.
5. Continue entering contact information.
– or –
In standby mode, press Send
2. Find a call from Outgoing Calls
Calls, or All Calls
3. Highlight a call record, then press Send
(
).
,
Incoming Calls Missed
,
.
(
).
31
Deleting Recent Calls Records
1. In standby mode, press Menu (
)
➔
Recent Calls
.
– or –
In standby mode, press Send
2. Find a call from Outgoing Calls
Calls, or All Calls
3. Highlight a call record, then press Options
4. At the Erase entry? prompt, press Yes
the Center Select Key ).
Deleting All Recent Calls Records
(
).
,
Incoming Calls
,
Missed
.
(
) ➔ Erase.
(
), then press
(
1. In standby mode, press Menu (
)
➔
Recent Calls
.
– or –
In standby mode, press Send
2. Find a call from Outgoing Calls
Calls, or All Calls
3. Highlight a call record, then press Options
all
4. At the Erase all entries? prompt, press Yes
press the Center Select Key ).
(
).
,
Incoming Calls Missed
,
.
(
) ➔ Erase
.
(
), then
(
Recent Calls
32
Section 7: Messages
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Create and Send Text Messages
1. IIn standby mode, press Menu (
➔ Send Message ➔ Text Message
2. Enter the phone number or e-mail address of the recipient
or press Add to select recipients from:
)
➔
Messages
.
Accessing Messages
ᮣ
In standby mode, press Menu (
)
➔
Messages
.
(
)
• Contacts: Choose contacts from the Contacts List.
• Groups: Choose a contacts Group.
– or –
In standby mode, use the Message Key
(
) on the
QWERTY keyboard to quickly open the Messages menu.
• Recent Calls: Choose numbers from Recent Calls.
3. Press the Center Select Key
(
). The Text: appears in the
Types of Messages
Your phone can send and receive:
display. Enter the text content of your message using the
keypad.
•
•
Text Messages
Picture Messages
33
4. At any point while composing a message:
Creating and Sending Picture Messages
Send Picture messages to recipients with a compatible phone or
other device, and accompany a Picture message with a voice
memo, ringtone, or downloaded melody.
•
To change the text entry mode, press Abc
desired text entry mode.
(
)
and select the
•
To complete the message text and set message send options,
press Options . The following options appear in the display:
Add Preset Msg: Insert pre-composed text into your message.
(
)
–
–
–
–
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send To field of the
Picture message composer.
Save As Draft: Save the message to your Drafts box.
Save As Preset Save the message as a preset message.
Add To Contacts: Save the recipient’s number or e-mail address as a
1. In standby mode, press Menu (
➔ Send Message ➔ Picture Message
2. Enter the phone number or e-mail address of the recipient
using the keypad, then press the Center Select Key ).
)
➔
Messages
Contacts list entry.
.
–
–
Delivery: Set delivery paremeters.
Cancel Msg: Cancels message or save the message to the Drafts
(
folder.
Tip: Press Add to display a pop-up menu containing: Contact Groups, and
,
5. Once you’re finished entering your message, press Send
).
Recent Calls. These options allow you to find and add recipients to the
(
To: list.
3. The Subject: field appears in the display. Enter a subject
for the Picture message using the keypad.
4. Highlight the Text: field, then enter the message text using
either keypad.
Messages
34
5. Highlight the PIC: field, then press Picture (
). A photo
Receiving Messages
gallery of thumbnail images appears in the display.
When you receive a message in standby mode or in a call, the
ringer sounds (unless turned off) and New Message appears in
the display. The date and time of the message also appear in the
display along with the following options:
•
•
•
Press View
(
)
to expand the highlighted picture for easier
viewing.
Highlight a picture and press the Center Select Key
the picture into your message.
(
) to insert
•
View Now: Opens the message, where you have the option to
Forward, Reply With Copy, Save As Preset, Lock, Add To Contacts,
Message Info, or Extract.
Press Camera
message.
(
)
to capture a photo to insert into the picture
6. Highlight the Sound: field, then press Sounds
(
). The
•
View Later: Saves the message to your inbox, where you can view it
My Ringtones screen appears in the display.
later, then returns your phone to standby mode.
•
Highlight and ringtone and press the Center Select Key
insert the preloaded or recorded ringtone.
(
) to
) to
Select the option of your choice.
•
Highlight Record New and press the Center Select Key
(
record a new voice memo, then select the new recorded sound file
to add it to the message.
35
•
•
Save Sound (Picture Messages Only): Save the audio file (sound)
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
included in this message to the My Sounds folder.
Save As Preset: Save the text in this message as a new Quick
Text.
Inbox
•
•
•
Lock/Unlock: Block/permit erasure of the message.
Received messages of all types (except Voicemail) are stored in
the Inbox.
Add To Contacts: Save the sender’s number to your Contacts.
Message Info: Shows message delivery status, addressee, size,
and so on.
1. In standby mode, press Menu (
)
➔
Messages
➔ Inbox.
•
Extract: Call the sender of the received message. Extract
4. Select an option to perform its function.
Tip: While in a call, press Options, then select Messages
.
Messages and Lock Mode
2. Highlight the message you wish to view, then press OPEN
to view contents of the highlighted message.
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
(
)
3. While viewing your message, press Options (
). The
following options may appear in the display:
• Play again (Picture Messages Only): Replay the sound attached to
the message.
•
•
Forward: Send a copy of this message to another recipient.
Reply With Copy (Text Messages Only): Compose and send a
reply message to the originator of the received message and
include a copy of the original message.
•
Save Pic (Picture Messages Only): Save the picture included in
this message to the My Images folder.
Messages
36
Managing Inbox Messages
Outbox
1. In the Messages menu, select Inbox. The Inbox appears in
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or e-mail was successfully received by enabling
the Enh. Delivery Ack/Delivery Ack feature.
the display showing a list of received messages.
2. Highlight a message in the list. You have the following
options:
Managing Outbox Messages
•
To remove the highlighted message from the Inbox, press Erase
(
).
1. In the Messages menu, select Outbox. Your list of sent
•
•
To review the highlighted message, press OPEN
(
).
messages appear in the display.
For more options, press Options
appear in the display:
(
). The following options
2. Highlight a message in the list. You have the following
options:
–
–
Reply: Compose and send a reply message to the originator of the
received message.
•
To remove the highlighted message from the Inbox, press Erase
(
).
Reply With Copy (Text Messages Only): Compose and send a reply
message to the originator of the received message and include a copy
of the original message.
•
•
To review the highlighted message, press OPEN
(
).
For more options, press Options
appear in the display:
(
). The following options
–
–
–
–
–
Forward: Send a copy of this message to another recipient.
–
–
Forward: Send the highlighted message to another recipient.
Lock/Unlock: Block/permit erasure of the highlighted message.
Resend: Send another copy of the highlighted message to the original
Add To Contacts: Save the sender’s number to your Contacts.
recipient.
Erase Multiple: Delete selected unlocked messages from the Inbox.
–
–
–
–
Lock/Unlock: Block/permit erasure of the highlighted message.
Message Info: Shows message delivery status, addressee, size, and
Add To Contacts: Save the recipient’s number to your Contacts.
so on.
Erase Multiple: Select unlocked messages for deletion.
Select an option to perform its function.
Message Info: Shows message delivery status, addressee, size, and
so on.
Select an option to perform its function.
37
View and Edit Draft Text Messages
Draft Box
1. In the Messages menu, select Drafts. A list of draft
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
messages appears in the display.
2. Highlight a text message that you wish to view or edit, then
press EDIT
display.
(
). The Create Txt Msg screen appears in the
Create a Draft Message
1. In the Messages menu, select Send Message and then
3. Enter or change the recipient’s number and/or e-mail
select one of the following Send Message options:
address and the message text using the keypad.
•
•
Text Message
4. Press OK
(
)
to move to the next field.
Picture Message
5. To complete the message text and set message send
options, press Options. The following options appear in
the display:
The Create Txt Msg/Create Pic Msg screen appears in
the display showing the To: list.
2. Enter the phone Number or Email address of a recipient,
• Add Preset Msg: Insert pre-composed text into your message.
then press OK
(
).
• Save As Draft: Save the message to your Drafts box.
Tip: Press Add to display a pop-up menu containing: Contacts Groups, and
,
• Save As Preset: Save message as a preset message.
Recent Calls. These options allow you to find and add recipients to the
Send To: list.
• Add To Contacts: Save the recipient’s number or e-mail address to
your Contacts.
3. Compose your message using the keypad, press Options,
• Delivery: Set delivery paremeters.
then select Save As Draft. “Message saved in drafts
”
• Cancel Msg: Cancels message or save the message to the Drafts
folder.
appears in the display and your message is saved to the
Drafts box.
6. Select an option to perform its function.
7. When you have completed composing your message,
press SEND to send it.
Messages
38
View and Edit Draft Pic. Messages
4. Select an option to perform its function.
5. When you have completed composing your message,
1. In the Messages menu, select Drafts. A list of any draft
press SEND to send it.
messages appears in the display.
Managing Draft Messages
2. Highlight the picture message that you wish to view, then
press EDIT
the display.
(
). The Create Pic Msg screen appears in
1. In the Messages menu, select Drafts. A list of any draft
messages appears in the display.
3. Make any needed changes and press Options (
). The
2. Highlight a message, then do one of the following:
following options appear in the display:
•
To remove the highlighted message from the Drafts box, press
Erase
•
Preview: Shows the message contents.
(
).
• Add Preset Msg: Insert pre-composed text into your message.
•
To access other options, press Options
(
). The following
options appear in the display:
•
•
•
Save As Draft: Saves the changed message to the Draft Box.
Priority Level: Choose Urgent Normal, or Low
–
Send: Send the highlighted message to the number or e-mail address
currently included with the message.
Lock Unlock: Block/permit erasure of the highlighted message.
,
.
Validity Period: Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
–
–
/
Add To Contacts: Save the recipient’s number and/or e-mail address
Time
.
to your Contacts.
•
Delivery Ack: Requests confirmation when your message is
received.
–
–
Save As Preset: Save the message text as Quick Text for insertion into
other messages.
•
•
Remove Pic: Remove image included in draft message.
Erase Multiple: Delete selected unlocked draft messages.
Remove Sound: Remove sound file included in draft message.
Select an option to perform its function.
• Add Slide: Add another picture, text, and sound to this message.
• Erase Slide: Remove a slide added to this message.
•
Add To Contacts: Save the recipient’s number or e-mail address
to your Contacts.
39
Voicemail
Erase Messages
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
details of the Voicemail message.
You can erase all of the messages in any or all of message boxes
using one convenient sub-menu.
Note: This function erases all messages in the selected message box. To
delete a single message, go to the respective message box, highlight
the message, and press Erase. (For more information, refer to
When you’re notified of a new voicemail message by an alert
tone and the new message icon, the following options pop:
•
Listen Now: Calls your voice mailbox and lets you listen to your
messages.
1. In standby mode, press Menu (
)
➔
Messages
•
Listen Later: Returns you to standby mode where you can choose to
call your mailbox and review your messages at a later time.
➔ Erase Messages. The following options appear in the
display:
Tip: You can also access your voicemail from standby mode, by pressing and
holding to speed call your voice mailbox.
•
•
•
•
Inbox: Deletes all unlocked messages stored in the Inbox.
Outbox: Deletes all unlocked messages stored in the Outbox.
Drafts: Deletes all unlocked messages stored in the Drafts box.
Social Networking
Social Networking provides a single point for accessing online
communities and content. You can save your usernames (but not
All Messages: Deletes all unlocked messages stored except
Voicemail.
passwords) to allow faster sign-in to Facebook
Twitter
In standby mode, press Menu (
Social Networking
,
MySpace and
2. Select the message box containing the messages you
want to delete and press theCenter Select Key ) .
You’re prompted to confirm the erasure of all messages in
the selected box or in all boxes. Press Yes ( ) t o delete
.
(
ᮣ
)
➔
Messages
➔
.
the messages or press No (
)
to cancel deleting the
messages.
Messages
40
• Message View: Choose a message view. With Message View set
to Chat, multiple text messages exchanged with a single addressee
appear as a chat session. With Message View set to Normal, view
messages individually.
Msg Settings
In standby mode, press Menu (
ᮣ
)
➔
Messages
➔ Msg Settings. The following options appear in the
display.
•
•
•
•
•
•
Notification: Allows you to set how you are notified of new
messages.
Auto Save: Choose whether your messages are saved
automatically when you exit them.
Auto Erase Choose to receive or not to receive a warning
:
message when you delete a message.
Auto View: Allows you to view the full content of a text message
as the messages is received.
Entry Mode: Choose the default method for entering text into
messages.
CB #: Choose or create a callback phone number to be included
with outgoing messages.
•
•
VM #: Edit or view your Voicemail number.
Signature: Choose to include a text signature in outgoing
messages.
•
•
Preset Msgs: View preloaded messages or create new messages.
Auto Scroll: Allows you to view the full content of a text message
automatically rolls upward on the display.
• Messaging Font Size: Choose a message font size.
41
Section 8: Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Finding a Contacts Entry
1. In standby mode, press Contacts
– or –
(
).
Accessing Contacts
In standby mode, press Menu (
)
➔
Contacts
➔
ᮣ
In standby mode, press Menu (
)
➔
Contacts
.
Find
.
– or –
The Find screen appears in the display with the Go To field
In standby mode, press Contacts (
).
and the first Contacts entry highlighted.
2. Enter a name. As you enter letters, the closest match
appears in the display.
3. When the desired entry is listed in the display, highlight the
entry or use the navigation key to scroll through the
contacts numbers and press Send
(
) to the selected dial
the number.
•
Press Edit
(
)
to add or change information for this entry.
•
Press VIEW
(
)to show information about this entry.
Contacts
42
•
Press Options
(
)
for additional options that may appear in
Adding a New Contacts Entry
the display.
You can use either of two methods to add an entirely new entry to
Contacts.
–
–
–
New Contact: Add a new entry to Contacts.
Dial Method
Erase Multiple: Erase one or more selected Contacts entries.
Send Txt Msg: Create and send a Text message to the selected
1. In standby mode, enter the number you wish to add to your
Contact.
contacts.
–
Send Pic Msg: Create and send a Picture message to the selected
2. Press Save (
)
➔ Create New. The Create New screen
Contact.
appears in the display showing the following icons:
–
–
Call: Dial the number associated with the name.
Send Name Card Via Bluetooth: Send a copy of a Contacts entry to
Mobile
Pager
Home
Fax
Work
another Bluetooth device.
3. Select the number type that matches your new entry.
4. Enter a name to associate with the Contacts entry.
Press SAVE
(
) to save the new entry.
43
Menu Method
Editing a Contacts Entry
1. In standby mode, press Menu (
)
➔
Contacts
➔
1. In standby mode, press Menu (
)
➔
Contacts
➔
Add New Contacts
.
Find
.
The Add New Entry screen appears in the display with the
2. Highlight the entry and press VIEW
(
). The View
Name field highlighted.
Contact screen appears in the display showing the
highlighted entry’s information.
2. Enter the name of the new entry using the keypad.
3. Press EDIT (
). The Edit Contact screen appears in the
Highlight one of the following fields:
display.
Mobile
Home
Work
Pager
Email
Group
Ringtone
Fax
4. Highlight the particular information you want to edit
•
•
To backspace and delete numbers or letters, press
To clear all numbers or letters in the highlighted field, press and
hold
Press Options
.
Picture
.
•
(
), the following options appear in the display:
3. Enter a phone number e-mail address or picture in the
–
Set Speed Dial/Remove speed dial: Assign/remove a speed dial
highlighted field.
4. Repeat steps 3 and 4 as needed.
–
Set as default: Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
5. Press SAVE
(
) to save the new entry.
–
–
Wait: A hard pause (waits for input from you).
2-Sec Pause: A 2-second pause after which dialing resumes.
Select the desired option.
5. When you’re finished changing the contents of a field,
press SAVE ). Your changes are saved and a
(
Contacts
44
Create a New Entry
Saving a Number After a Call
4. From the Save screen, select Create New. The Create
New screen appears in the display showing the following
number type options:
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
Mobile
Pager
Home
Fax
Work
1. Press End
(
) to end your call. The call time, length of
call, phone number, and name of the party (if available)
appear in the display.
1. Select the number type that matches your new entry.
2. Enter a name for the new entry.
2. Press Save. The Save screen appears in the display
showing the following options:
3. Press SAVE to save the new entry to your Contacts list.
•
•
Create New: Lets you create a new Contacts entry.
Update Existing: Lets you add the number you entered to an
existing Contacts entry.
3. Select the desired option, then follow the instructions in
the upcoming sub-sections depending on whether the
number is a new entry or you are adding it to an existing
entry.
45
Add to an Existing Entry
Speed Dial
1. From the Save screen, select Update Existing. The
Update Existing screen appears in the display showing
your Contacts list with the Go To field and the first
Contacts entry highlighted.
Speed Dials are 1-, 2- or 3-digit shortcuts you assign to contacts,
to allow you to quickly call the contact.
Note: Some Speed Dials are reserved by default, and cannot be assigned:
Speed Dial 1 is reserved for Voicemail. Speed Dial 211 is reserved for
information about health and human services, 311 for non-
emergency municipal services; 411 for directory assistance; 611 for
customer service access; and 911 for emergencies.
2. Find and select the Contacts entry to which you want to
add the new number. (For more information, refer to
3. The following number type options appear in the display:
•
•
•
To speed dial the Contacts entry assigned to Location 5, press and hold
, (1-touch dialing).
Mobile
Pager
Home
Fax
Work
To speed dial the Contacts entry assigned to Location 35, press
then press and hold , (2-touch dialing).
To speed dial the Contacts entry assigned to Location 235, press
press , then press and hold , (3-touch dialing).
,
,
Number types that are already assigned a number show
the number instead of the number type label.
4. Select the desired unassigned number type. The Contacts
entry information appears in the display with the new
number posted in the appropriate number type field.
5. Press SAVE to save your changes to the existing entry.
Contacts
46
Assigning a Speed Dial Location
Removing a Speed Dial Location
1. In standby mode, press Menu (
)
➔
Contacts
➔
To assign a Speed Call number to a new Contacts entry number,
do the following:
Find
2. Highlight the desired entry, then press Edit (
3. Highlight the number field marked by the Speed Dial icon
).
4. Press Options (
.
).
1. In standby mode, press Menu (
Speed Dial
2. Highlight a speed dial location, or enter the speed dial
digits into the Go To field, then press SET ( ).
)
➔
Contacts
➔
.
(
)
➔
Remove speed dial. “Remove
speed dial?” prompts you to confirm your desire to
remove the entry.
3. At the Set Speed Dial screen, highlight a contact, or enter
the first few characters into the Go To field.
5. Press Yes (
)
to remove the Speed Dial assignment.
4. At the Set speed dial to contact? prompt, highlight
“Speed Dial Removed” pops up in the display, and you
Yes
(
).
are
47
Add Contacts Entry to a Group
Groups
Using Add New/Edit Contact Option
Groups let you easily send messages to multiple, selected
Contacts. You can also use Groups to find Contact entries and to
add/remove Contacts names in a Group or to create or rename a
Group.
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
1. In standby mode, press Menu (
)
➔
Contacts
.
Viewing Groups
2. Higlight and contact and press VIEW
(
) ➔
EDIT
(
).
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
3. Highlight the Group field, then press Set (
).
the phone and slide it open to access the QWERTY keyboard.
The Select Group screen appears in the display showing
groups similar to the following:
1. In standby mode, press Menu (
)
➔
Contacts
➔
Group.
•
•
•
•
•
No Group
Business
Colleague
Family
2. Available groups appear in the display. These groups are
available by default:
•
•
•
•
•
No Group
Business
Colleague
Family
Friends
4. Select the Group to which you want to assign the selected
Contact.
You are returned to the Add New Entry/Edit Contact
screen and the selected Group name populates the Group
field.
Friends
3. Highlight a group, then press VIEW
(
) to display a list of
group members.
5. Press
to save your changes.
Contacts
48
Using Group Add Option
3. When you have marked the Contacts you want to add to
the group, press Done. “Contact added to group”
appears in the display, followed by the selected Group list
including the added Contacts.
The Add option lets you add one or more existing Contacts to a
Group.
1. In standby mode, press Menu (
)
➔
Contacts
➔
Rename a Group
Group.
The Rename option lets you change the name any of the Groups,
The Group List screen appears in the display showing
except No Group.
Groups similar to the following:
•
•
•
•
•
No Group
Business
Colleague
Family
1. In standby mode, press Menu (
)
➔
Contacts
➔
Group. The Group List screen appears in the display.
2. Highlight a Group name (other than No Group) that you
wish to change, then press Options (
)
➔ Rename.
The Rename Group screen appears in the display.
3. Enter changes to the group name using either keypad.
4. When you have completed your changes to the Group
Friends
2. Highlight a Group, then press Options (
)
➔ Add. The
Add Contacts screen appears in the display showing all
name, press SAVE (
).
Contacts entries.
•
Highlight a Contacts entry you want to add to the group, then press
MARK . A checkmark appears in the entry’s checkbox.
“Group Renamed” appears in the display followed by the
Group List screen showing your renamed Group.
(
)
Repeat as needed to check all the desired Contacts.
Press Options Mark All to mark all Contacts.
•
➔
Note: To unmark a marked Contact, highlight the Contact and press MARK
) to clear the checkmark. To unmark Contacts, press Options
Mark All
(
➔
49
Add a New Group
Deleting a Contacts Entry
1. In standby mode, press Menu (
)
➔
Contacts
➔
1. In standby mode, press Menu (
)
➔
Contacts
➔
Group. The Group List screen appears in the display.
find the Contacts entry you want to delete.
2. Press New (
). The New Group screen appears in the
2. Highlight the desired entry, then press Options (
)
➔
display.
Erase Multiple.
3. Enter a new group name using either keypad.
4. Press SAVE ( ). “Group Saved” appears in the display
followed by the Group List screen showing your new
3. Highlight and press the Center Select Key
(
) to select
the Contact entry you want to erase.
4. Press Done
(
). You are prompted to confirm the
Group.
erasure.
5. Press Yes (
)
to confirm erasure of the selected
to retain the Contact.
Erase a Group
Contact. Press No (
)
The Erase option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
1. In standby mode, press Menu (
Group. The Group List screen appears in the display.
2. Highlight the Group you wish to delete, then press Options
➔ Erase.
You are prompted to confirm the Group erasure.
3. Press Yes ( to confirm erasure of the highlighted
Group. Press No ( to retain the Group.
4. The deleted Group entries entries return to No Group
)
➔
Contacts
➔
ᮣ
In standby mode, press Menu (
)
➔
Contacts
➔
(
)
Memory Info.
The Memory Info Contacts screen appears in the display
showing the amount of memory Used and remaining for
Contacts entries.
)
)
.
Contacts
50
Section 9: Multimedia
Use your Comment to take full color digital pictures, display them
on your phone’s vivid color display, and instantly share them with
family and friends.
Point, Click, and Send Pictures
1. In standby mode, press and hold the Camera Key
(
)
on the right side of the phone.
Accessing Multimedia
2. Press the Camera Key
(
) or press the Center Select
ᮣ
In standby mode, press Menu (
)
➔
Multimedia
.
Key ) to capture a photo.
(
The picture is saved and the Create Pic Msg screen
appears in the display.
– or –
In standby mode, press and hold the Camera Key
on the right side of the phone.
(
)
3. Enter the phone number or e-mail address of the recipient
or press Add
(
)
to select recipients from:
Camera
Taking Snap Shots
• Contacts: Choose contacts from the Contacts List.
• Groups: Choose a contacts Group.
To take a single picture using the current camera settings, do the
following:
• Recent Calls: Choose numbers from Recent Calls.
4. Press OK
(
).
1. In standby mode, press and hold the Camera Key
(
)
5. Select other message fields as needed.
on the right side of the phone.
6. When you are finished composing your message, press
2. Using the display as a viewfinder, point the camera at your
SEND
(
) to send the Picture message to the intended
subject.
recipient(s).
3. When the image that you wish to capture appears in the
display, press the Camera Key
Select Key ).
(
) or the Center
(
51
Camera Options
Self Timer: Set a timer for a delay between pressing
ᮣ
In standby mode, press and hold the Camera Key
on the right side of the phone.
(
)
the Camera Key and the taking of the photo. Choose
a timer of 2 Seconds
,
5 Seconds, or 10 Seconds, or
choose Off
.
•
•
•
Press My Images
Press the Center Select Key
Press to display camera options.
Shooting Mode
to display the image gallery.
(
) to take a picture.
Color Effect: Set the Camera to replace photo colors with
Normal colors, Black&White Sepia Negative Green, or
Aqua
,
,
,
.
Reset Settings: Returns camera setting to the
•
Single Shot: Takes one photo.
defaults.
•
•
Series Shot: Takes a series of of pictures.
•
•
•
•
•
Memory: Set the Camera to save photos to Phone or
Card memory.
Mosaic Shot Combines from 4 to 9 shots into a
:
single picture, depending upon which one of 18
available Mosaic layouts you select.
Auto Save: Set the Camera to automatically save (On
photos when taken or Off
Icon Display: Set the Camera to Display All icons,
display a Guideline grid, or No Icons
Shutter Sound: Set the Camera’s shutter sound to Off
Shutter OK, or DingDong
Reset Settings: Reset all Camera settings to default
values (Yes) or No
)
.
Resolution:Choosea resolution for newphotos, from
1280x960 640x480 320x240 or 176x144
,
,
.
.
,
Quality: Set image quality, from SuperFine
Normal
,
Fine or
,
.
.
White Balance: Choose a setting for the light source,
from Auto Sunny Cloudy Tungsten, or Fluorescent
.
,
,
,
.
Night Shot: Select On to enable infrared light sensing
for low light conditions, or Off to use available light.
Multimedia
52
After taking a picture, the following options appear in the
display:
Music Player
.
Music Player lets you play MP3 and unprotected AAC, AAC+,
WMA music files, loaded onto an optional microSD™ Memory
Card using a personal computer. (For information on loading
Save: Press right soft key to save the image.
Send:PresstheCenterSelectKey
(
)tosendthe
image in a picture message.
Launching the Music Library Menu
Delete: Press to delete the image.
1. In standby mode, press Menu (
)
➔
Multimedia
➔ Music Player ➔ Library
(
). The following options
appear in the display:
• NowPlaying: Music Player mode only : Indicates number of music
files currently playing. Select this option (or press Back) to return to
the Music Player screen.
• All: Lists all music files on the Memory Card.
• Artists: Lists artist names for music files on the Memory Card.
• Albums: Lists album titles for music files on the Memory Card.
• Genres: Lists music files by their music types.
• Recently Added: Lists music files most recently added to your
Memory Card.
• Playlists: Lists any playlists you have saved and lets you create,
save, and manage playlists.
2. Select the desired option and press OPEN
(
). A list of
music files appears in the display.
53
Music Player Controls
3. Highlight a music file, then:
•
•
•
Press Play
Press MARK
Press Options
(
)
to play the highlight music file.
•
Volume Key:
–
Press the Volume key Up to play a music file louder.
(
)
to select the file for playing or other options.
–
Press the Volume key Down to play a music file softer.
(
)
to display the following options:
•
Navigation Key
:
–
–
–
–
Mark All: Marks all listed music files for playing, removal, or
assignment of player settings.
–
–
–
Press the Center Select Key
to pause/resume playing a music file.
Press the Navigation key Down to stop playing a music file.
Press the Navigation key Left to skip to an earlier music file in the
selected list.
Erase: Deletes highlighted or marked music file(s) from the Memory
Card.
Add to Playlist: Lets you add a marked music file to an existing
playlist.
–
–
Press the Navigation key Right to skip to a later music file in the
selected list.
Press the Navigation key Up to return to the selected list and choose
another music file to play..
Song Info: Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, Duration, File Size, and Date of the highlighted music
file.
Playing Music
•
Library soft key: Returns you to the Library screen.
1. In standby mode, press Menu (
)
➔
Multimedia
). A list of
➔ Music Player ➔ Library
(
).
2. Select the desired option and press OPEN
(
music files appears in the display.
3. Highlight a music file and press Play
(
).
Multimedia
54
•
Options soft key: Shows the following sub-menus and options:
Loading Music Files
–
Background Music: If a music file or playlist is playing, returns you to
the Home screen (standby mode) while continuing to play the music file
or playlist. Music continues playing while you use other phone
functions. To end the music, return to the Home screen and press
In addition to downloading music to your phone, you can also
transfer (“sideload”) music from a personal computer to the
Memory Card in your phone.
1. Install a microSD™ or microSDHC™ Memory Card into
End
(
).
your phone.
–
–
–
–
–
–
Play Mode: Lets you change the play mode from Normal, Shuffle,
Repeat One, or Repeat All.
Add to Playlist: Moves you to the Playlists menu to let you add the
selected music file to a playlist.
Remove From List: Deletes the selected music file from the Memory
Card
Visual Supplements: Lets you change the Music Player visualization to
Simple View, Equalizer, Album Art, or Lyrics.
Memory Info: Displays the Memory Usage screen which lists Memory
Card usage and availability amounts.
2. Power your phone on.
3. Connect the microUSB end of the USB Data Cable to the
power-accessory connector on your phone.
4. Check that the PC Connection setting is set to USB Mass
Storage
.
Song Info: Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, Duration, File Size, and Date of the highlighted music
file.
55
5. Connect the USB end of the USB Data Cable to a matching
connector on your personal computer. A new “Removable
Disk” window should open on your computer screen.
My Images
My Images lets you manage your photos and pictures you
download, and lets you choose the pictures that appear in your
phone’s display while in standby mode (wallpaper), and as image
IDs for your contacts.
6. Select the Open folder to view files option. A new
®
Windows Explorer window should open on your
computer screen.
1. In standby mode, press Menu (
)
➔
Multimedia
7. Drag or download music (MP3) files into the “My_Music”
➔ My Images.
folder.
2. Highlight an image or photo.
•
•
Press Camera
(
)
to take new photos.
Note: You can also insert the Memory Card into a compatible card reader.
Card readers vary, so follow the installation instructions included with
your card reader and personal computer.
Press VIEW
(
)
to expand the highlighted image to fill the
screen.
•
Press Options
(
)
the following options appear in the display:
–
Send: Send the currently highlighted or displayed image as part of a
Picture message, Via a Bluetooth connection, To Facebook, or To
MySpace.
–
–
–
Set As: Assign the currently highlighted or displayed image as the Main
Wallpaper or as the Picture ID for a Contact.
Erase Files: Delete one or more marked images from the My Images
folder.
Move: Relocate the currently highlighted or displayed image from
phone memory to a Memory Card or from a Memory Card to phone
memory.
–
Copy: Copy the currently highlighted or displayed image from phone
memory to a Memory Card or from a Memory Card to phone memory.
Multimedia
56
–
View by Location: Lets you view All images or only those images
stored in Phone Memory or Card Memory.
Assigning Ringtones
1. In standby mode, press Menu (
)
➔
Multimedia
–
–
Rename: Change the name of the picture file.
➔ My Ringtones. The following options appear in the
display:
Lock/Unlock: Prevent/allow erasure of the currently highlighted or
displayed image.
2. Highlight a file. You have the following options:
–
–
Slide Show: View all of your images in sequence as a slide show.
•
Press Set As
(
)
to assign the highlighted as a Ringtone, a
Picture Info: View the Name, Date and Time created, Resolution, and
Size of the currently highlighted or displayed image.
Contact ID, or an Alert Tone
.
•
•
Press PLAY to playback the highlighted file.
Press Options the following options appear in the display:
Unlock : Prevent/allow erasure of the selected voice memo file.
(
)
–
Get More Graphics: Dowload graphics from the web.
(
)
My Ringtones
My Ringtones lets you record voice memos and assign them or
ringtones, melodies, or music files as ringtones for calls, alarms,
and other alerts.
–
–
–
–
–
–
Lock/
Erase: To erase the selected voice memo file.
Rename: Change the name of the voice memo file.
Ringtone Info: Shows the title, size, type, and date for the file.
Get More Tones: Download tones from the web.
Recording Voice Memos
ᮣ
In standby mode, press Menu (
➔ My Ringtones. The following options appear in the
display:
)
➔
Multimedia
Send via Bluetooth: Sends a copy of this file to another device over a
•
Record New: Lets you record voice memos.
–
Send Pic Msg: Send to someone as part of a Picture message.
–
–
–
Press REC
Press Pause
Press SAVE
(
) to start recording a voice memo.
) to pause/resume recording.
(
(
) to stop recording and save the voice memo.
•
A list of recorded voice memos, ringtones, melodies, and music
files.
57
Ringback Tones
Ringback tones replace the standard ringing that callers hear as
they wait for you to answer. Instead, callers can hear your
favorite tune as they wait patiently for you to answer.
ᮣ
In standby mode, press Menu (
)
➔
Multimedia
➔ Ringback Tones. Follow the prompts to download.
Multimedia
58
Section 10: Browser
This section outlines how to launch the browser and navigate to
other pages within the browser, and how the keys on the
QWERTY keypad are used with web application. Additionally,
links to other sites are briefly discussed.
Using the Browser
When you use the browser, some of the keys operate differently
than during a normal phone call. Browser presents on-screen
items in any of the following ways:
Launching the Browser
•
•
•
•
Text or numeric input.
ᮣ
In standby mode, press Menu (
)
➔
Browser
.
Links (embedded in content).
Numbered options (some may not be numbered).
Simple text.
Exit the Browser
ᮣ
Press End
(
).
You can act upon options or links by using the soft keys.
Browser soft keys
At the bottom of the browser display is a bar that contains
browser commands. The Left and Right soft keys (
) on the
keypad are used to execute the commands that appear in their
respective corners of the display. These are called “soft keys”
because their functions change depending on the application.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key (
) to select a link when it is highlighted.
59
How Browser Keys Work
The following table lists browser keys and their functions.
Right Soft Key: Press to activate the
command that appears above it in the
display.
Navigation Key: Use to browse lists and
options.
Games & Apps
With Games and Apps, you can download full featured
applications over the air including games, personalized ring
tones, pictures, and more.
Back Key: Press once to back up one
page. Press and hold to go back to home
page. Press once to clear the last number,
letter, or symbol entered. Press and hold to
completely clear the entry.
ᮣ
In standby mode, press Menu (
)
➔
Games & Apps
.
SHIFT Key: Press before entering text to
enable uppercase characters.
Spacebar: Press to insert a space when
entering text.
Number 1 thru 0: Use the number keys to
select items in a menu if they are
numbered.
End Key: Press to exit the browser and
return the phone to standby mode.
Left Soft Key: Press to activate the
command that appears above it in the
display.
Browser
60
Navigator
Cricket Navigator is a downloadable application that turns your
handset into a powerful GPS navigation tool with audible turn-by-
turn driving directions, local search and maps—just like an
advanced GPS navigation system but at a fraction of the cost.
And it’s all in your phone!
Cricket Navigator gives you audible, turn-by-turn directions to
any destination, along with detours if traffic’s heavy, and re-
routing if you miss a turn. You can perform a local search by
business category, address, intersection or airport code and then
call found locations with a press of the send key! Cricket
Navigator points out landmarks along your route, like
restaurants, gas stations (with prices) and more. Color 3D maps
with pan and zoom options show you where you are, at any given
moment.
ᮣ
In standby mode, press Menu (
)
➔
Navigator
.
61
Section 11: Tools
This section explains how you can use your phone's productivity
tools to view today’s calendar, schedule appointments, set an
alarm, perform simple math calculations, and more.
Add New Device
1. In standby mode, press Menu (
)
➔
Tools
➔
Bluetooth. ➔ Registered List ➔ Add New Device
.
Accessing Tools
Note: If prompted with “Turn bluetooth on?”, press Yes
.
ᮣ
In standby mode, press Menu (
Cricket 411
In standby mode, press Menu (
Cricket 411
Bluetooth
)
)
➔
➔
Tools
Tools
.
2. Place the new Bluetooth device in discovery mode.
3. On your phone, press OK ). Your phone will search for
(
ᮣ
➔
discoverable devices and display them.
.
4. Tap the device you want to pair with your phone, the phone
will attempt to automatically pair with the selected device.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
If automatic pairing fails, you are prompted to enter the
passkey or PIN for the selected device. (For other wireless
handsets, choose a passkey or PIN and enter the same one
on both devices. For more information on headsets and
handsfree units, refer to the user manual for the other
device.)
ᮣ
In standby mode, press Menu (
Bluetooth
Turn Bluetooth On/Off
)
➔
Tools
➔
.
ᮣ
In standby mode, press Menu (
Bluetooth ➔ Bluetooth Settings ➔ Enable or Disable
)
➔
Tools
➔
5. Except for other wireless handsets, you are prompted to
confirm whether you want to connect your phone with the
other device. To connect with the other device, press Yes
.
(
).
Tools
62
Registered List
Voice SVC
The Registered List contains paired Bluetooth devices, and
allows you to connect/disconnect from a device or modify
settings for paired devices.
Your device includes Nuance Vsuite, state-of-the-art voice
recognition software that lets you use your voice to dial numbers,
access your Contacts list, and open Tools. The following options
are available:
Bluetooth Settings
ᮣ
In standby mode, press Menu (
Voice SVC
)
➔
Tools
➔
Bluetooth Settings allow you to set your phone’s Bluetooth
availability, and view and set information about your phone’s
Bluetooth capabilities.
.
• Voice Commands: Lets you place calls, access your Contacts List,
review your appointments, and more by speaking commands into
your phone.
ᮣ
In standby mode, press Menu (
Bluetooth Bluetooth Settings.
• Enable Disable: Turns Bluetooth power On / Off.
)
➔
Tools
➔
➔
• Voice Settings: Lets you tailor Vsuite to better respond to your
voice and your phone use preferences.
/
• Discovery Mode: Makes your phone “visible” to other Bluetooth
devices for pairing and connecting.
• Device Name: Lets you review and/or change the Bluetooth name
of your device.
• Supported Profiles: Lists and describes the Bluetooth profiles your
phone supports (Headset, Handsfree, A2DP (stereo audio),
Phonebook Access, Object Push, Dial Up Networking and File
Transfer).
• Device Info: Lists the Bluetooth Type, Status, and Address of your
phone.
63
Calendar
World Time
Calendar allows you to view the current, past, or future month in
calendar format, and schedule events. While viewing the
calendar, the current date is highlighted, and days with
scheduled events are surrounded by a box.
World Clock lets you view the time of day or night in any two of
the 24 different time zones around the world you choose. You
select your time zones by city and/or country name.
Note: World Clock requires your Wireless Provider’s digital service.
In standby mode, press Menu (
)
➔
Tools
➔
Calendar.
Memo Pad
ᮣ
In standby mode, press Menu (
World Time
Calculator
)
➔
Tools
➔
.
Create notes and store them in Memo Pad. Return to Memo Pad
anytime to review and edit your notes.
ᮣ
In standby mode, press Menu (
Memo Pad
Alarm Clock
)
➔
Tools
➔
You can perform calculations, including addition, subtraction,
multiplication, and division using your phone.
.
ᮣ
In standby mode, press Menu (
Calculator
Stop Watch
)
➔
Tools
➔
.
Set up to 10 alarm clocks for various times, days of the week, or
ringers. You can turn these alarm clocks On and Off without
affecting their settings.
Stop Watch provides a timer that you can use to record event
times and/or to record lap times.
ᮣ
In standby mode, press Menu (
Alarm Clock
)
➔
Tools
➔
.
ᮣ
In standby mode, press Menu (
Stop Watch
)
➔
Tools
➔
.
Tools
64
Converter
The Converter converts values for currency, length, weight,
volume, area, or temperature. In the currency converter, you can
edit or add currency exchange rates.
ᮣ
In standby mode, press Menu (
Converter
Tip Calculator
)
➔
Tools
➔
.
Tip Calculator allows you to calculate a percentage amount for a
tip, and the total due for multiple payers.
ᮣ
In standby mode, press Menu (
Calculator
)
➔
Tools
➔
Tip
.
65
Section 12: Settings
This section explains how to configure your phone’s language,
network preferences, security options, and other settings.
Display Settings
Display settings let you change your phone’s menu appearance,
display brightness and contrast, and display content to better
meet your needs.
Accessing Your Phone’s Settings
ᮣ
In standby mode, press Menu (
)
➔
Settings
.
ᮣ
In standby mode, press Menu (
Display Settings
Wallpaper
)
➔
Settings
➔
Location
.
Choose whether your phone’s GPS (Global Positioning System)
location is available to the network at all times, or only when
you’ve dialed an Emergency Number, such as 911
Wallpaper lets you choose an image to appear in the background
on your phone’s Main display while in standby mode.
ᮣ
In standby mode, press Menu (
)
➔
Settings
➔
Location. Select Location On or 911 Only
.
ᮣ
In standby mode, press Menu (
Display Settings Wallpaper Select from dowloaded
images in My Images or preloaded images in Preset
Images
)
➔
Settings
➔
➔
.
Note: Check with your Wireless Carrier to determine if/when/where location-
based services are available.
.
Settings
66
Backlight
Ringer Type
You can set the brightness of the backlight for your display or
keypad.
Use the Ringer Type sub-menu to select ringtones, melodies, or
recorded sounds to play as ringers for Voice Call or Messages
alerts.
ᮣ
In standby mode, press Menu (
Display Settings Backlight
You can set the Main Display
backlight to remain on for 10, 15 or 30 seconds; to be
)
➔
Settings
➔
➔
.
ᮣ
In standby mode, press Menu (
Sound Settings Ringer Type
)
➔
Settings
➔
➔
.
,
Keypad and Charging
Alerts
Always On; or to be Always Off. Set the Brightness of the
display by pressing the navigation keys up or down.
You can set your phone to sound an alert for each elapsed minute
during a call, whenever you enter or leave your service area, or
whenever you connect or disconnect a call, power your phone on
or off, and/or when Enhanced Voice Privacy becomes available or
unavailable.
Note: Prolonged backlight use drains your battery faster.
Sound Settings
Sound Settings let you customize your phone’s audio properties,
ᮣ
In standby mode, press Menu (
Sound Settings Alerts
Key Tone
)
➔
Settings
➔
➔
.
such as ringers, keypad tones, alerts, start up melody, and more.
ᮣ
In standby mode, press Menu (
Sound Settings
Master Volume
)
➔
Settings
➔
.
Lets you adjust the volume level and duration of the tones that
the keypad generates when you press the keys.
ᮣ
In standby mode, press Menu (
Sound Settings Key Tones
)
➔
Settings
➔
Set the Master Volume for all the sounds on your phone.
In standby mode, press Menu ( Settings
Sound Settings Master Volume
➔
.
ᮣ
)
➔
➔
➔
.
67
Auto Answer
Call Settings
The Call Settings sub-menu lets you set call options such as Auto
Retry, Data rates for data calls, and more.
Auto Answer lets you set your phone to automatically answer
calls after 1, 3, or 5 seconds.
ᮣ
In standby mode, press Menu (
Call Settings
Call Answer
)
➔
Settings
➔
ᮣ
In standby mode, press Menu (
Call Settings Auto Answer
Auto Retry
)
➔
Settings
➔
.
➔
.
You can set your phone to answer incoming calls only when
you press Send ) or when you press any key on the keypad
except End ), Volume Key ), or Camera Key
In standby mode, press Menu ( Settings
Call Settings Call Answer
Call Alert
Auto Retry automatically re-dials a number at an interval you
select, when there is no answer or the dialed party is busy.
Depending upon your location, the number of times your phone
re-dials a number may vary.
(
(
(
(
).
ᮣ
)
➔
➔
ᮣ
In standby mode, press Menu (
Call Settings Auto Retry
)
➔
Settings
➔
➔
.
➔
.
Call Alert lets you set your phone plays to notify you of incoming
calls by playing the voice calls ringer only, by reading any Caller
ID information and playing the ringer, or by reading the Caller ID
or Contact name only.
ᮣ
In standby mode, press Menu (
Call Settings Call Alert
)
➔
Settings
➔
➔
.
Settings
68
TTY Mode
Phone Settings
Your phone is fully TTY-compatible, allowing you to connect a TTY
device to the phone’s headset jack. Before you can use your
phone with a TTY device, you’ll need to enable TTY Mode.
You can set or reset the operating characteristics of your phone
to suit your location and/or to limit access to your phone.
ᮣ
In standby mode, press Menu (
Phone Settings
Airplane Mode
)
➔
Settings
➔
ᮣ
In standby mode, press Menu (
Call Settings TTY Mode read the prompt and select Yes
). Select TTY Full TTY + Talk (VCO) TTY + Hear (HCO)
or TTY Off
)
➔
Settings
➔
.
➔
➔
(
,
,
When set to On, Airplane Mode disables all radio functions of
.
your phone. This blocks you from making or receiving calls other
than Emergency (911) calls, but allows you to use other features
(such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
Note: TTY Mode must be enabled before you can use your phone with TTY/
TDD equipment.
The TTY Mode option has no effect on the phone’s earpiece,
microphone, or speaker. When you select TTY Full, all currently
enabled sound functions remain enabled.
ᮣ
In standby mode, press Menu (
Phone Settings Airplane Mode
)
➔
Settings
➔
➔
.
Tip: If you need to make an emergency call with Airplane mode enabled, just
dial the emergency number and press
.
Language
Choose the Language for the phone’s operation and displays.
In standby mode, press Menu ( Settings
Phone Settings Language. Select English or Español
ᮣ
)
➔
➔
➔
.
69
Change Lock
Security
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
The Change Lock option lets you replace your phone’s default
lock code (the last four digits of your phone number) with one of
your own choosing.
To access the Security sub-menu, you are prompted to enter your
phone’s four-digit lock code.
It is advisable to change the default lock code to a secret code for
security purposes.
ᮣ
In standby mode, press Menu (
Phone Settings Security
)
➔
Settings
➔
When you select Change Lock, your are prompted to enter the
current lock code followed by entering your new lock code, and
then re-entering it, for verification.
➔
.
Note: The default lock code is the last four digits of your mobile phone
number.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Lock Phone
The Lock Phone option lets you Lock or Unlock your phone
immediately or set your phone to lock itself On Power Up.
Emergency #
The Emergency # option lets you enter and store up to three
emergency numbers in your phone. Each number can be up to 32
digits long. You can dial your emergency numbers any time, even
when your phone is locked or restricted.
Locking the device blocks all outgoing calls except those to 911
and to any other user-programmed emergency numbers. You can
lock the phone manually, or set the phone to lock automatically
when turned on. In Lock mode, you can answer calls, but you
must unlock the phone to place calls (except to emergency
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 you will hear audible tone and an Emergency prompt will
appear in the display for the duration of the call.
Settings
70
Important!: Because of various transmission methods, network parameters,
and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
Caution!: Before selecting Reset Phone, contact your Wireless Carrier.
Invoking Reset Phone may erase settings made by your Wireless
Carrier from your phone, resulting in loss of service.
Erase All Entries
The Erase All Entries option deletes all entries from the Contacts
list.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for essential or emergency calls.
Restrictions
Remember to always turn your phone on and check for adequate
signal strength before placing an emergency call.
The Restrictions option settings let you Allow All Calls/Allow calls
only to/from your Contacts/Allow No Calls (Incoming and
Outgoing), Allow All/None SMS (Text) Messages, Allow All/None
MMS (Picture) Messages, and/or Allow All/Allow None Data calls.
Note: When you dial an emergency number, you phone locks itself to the
emergency location that answered the call and locks itself in 911-Only
mode, blocking from dialing any number but an emergency number.
Note: All default restriction settings are Allow All (unrestricted).
•
To store emergency numbers: Select the Emergency # option, then
select one of the three emergency number options, and enter and save
your new emergency number.
•
To call emergency numbers (even in lock mode): Simply enter 911 or
one of your emergency numbers and press
to place the call.
Reset Phone
The Reset Phone option returns all settings on your phone (except
for Contacts entries) to their factory default values.
71
System Select
Set Time
System Select allows you to set system selections for roaming.
Use the Set Time options to set the current time and date
displayed on your phone and used by your phone’s Tools.
ᮣ
In standby mode, press Menu (
)
➔
Settings
➔
Phone Settings System Select. Select one of the following:
➔
ᮣ
In standby mode, press Menu (
Phone Settings Set Time
)
➔
Settings
➔
➔
.
• Home Only: Your phone is only active in your home network’s
coverage area. When outside the coverage area, your phone will
not roam, and call functions and other features will not be available.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
• Automatic: Your phone automatically acquires service based on
default settings, using the Cricket network and the networks of
roaming partners.
With Airplane Mode set to On, the Set Time feature is enabled.
•
•
Select Set Time to enter the current time using your keypad:
–
The hour and minute must be entered using two digits each. You must
enter the hour in 12-hour format.
–
Use the Left and Right navigation keys to select am or pm
.
Select Set Date to enter the current date using your keypad:
–
The month and day must be entered using two digits each.
–
The year must be entered with all four digits.
Settings
72
Quick Search
Auto Key Lock
Quick Search allows easy searching for contacts and menus in
standby mode, by pressing keys on the QWERTY keyboard
The Auto Key Lock setting controls whether the external keypad
locks automatically when the backlight goes out.
ᮣ
In standby mode, press Menu (
Phone Settings Quick Search. Select On or Off
In standby mode, just enter the first few letters of a
)
➔
Settings
➔
ᮣ
In standby mode, press Menu (
Phone Settings Auto Key Lock. Select On or Off
With Auto Key Lock set to On, your phone automatically
)
➔
Settings
➔
➔
.
➔
.
Contact name, then press the Navigation key Up to find a
matching Contact.
disables its keys when the screen backlight goes out with
the phone closed.
Press a key to turn the screen backlight on, then press
PC Connection
Unlock
(
)
➔
Spacebar/Vibration Key
(
).
The PC Connection option lets you enable (USB Mass Storage
setting) or disable (No Connection setting) the Freeform II’s ability
to act as a USB flash drive, provided you have installed an
optional microSD or microSDHC Memory Card and an optional
USB Data Cable.
ᮣ
In standby mode, press Menu (
Phone Settings PC Connection
)
➔
Settings
➔
➔
.
With PC Connection set to USB Mass Storage, you can
transfer music, sound, ringtone, and image files to and
from a microSD or microSDHC Memory Card.
73
Memory Info
In standby mode, press Menu (
Memory Info
Memory Info allows you to:
Phone Info
Phone Info allow you to view information about your device.
ᮣ
)
➔
Settings
➔
.
ᮣ
In standby mode, press Menu (
Phone Settings Phone Info
)
➔
Settings
➔
➔
.
•
•
•
•
Save Options: Allow you to select a default storage location for
images taken with your phone’s Camera.
Phone Memory: Allows you to review the amount of available and
used phone memory.
Card Memory: Allows you to review the amount of available and used
card memory (if installed).
Format an optional microSD or microSDHC memory card.
Note: This option prepares used microSD™ or microSDHC™Memory Cards
for use with your phone. Repeated formatting of a Memory Card can
shorten its service life. Erase files rather that format the Memory Card.
Settings
74
Section 13: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. The terms “mobile device” or “cell phone” are used
in this section to refer to your phone. Read this information before
The majority of studies published have failed to show an
association between exposure to radio frequency from a cell
phone and health problems.
using your mobile device
.
The low levels of RF cell phones emit while in use are in the
microwave frequency range. They also emit RF at substantially
reduced time intervals when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects.
Exposure to Radio Frequency (RF) Signals
The U.S. Food and Drug Administration (FDA) has published
information for consumers relating to Radio Frequency (RF)
exposure from wireless phones. The FDA publication includes the
following information:
The biological effects of radio frequency energy should not be
confused with the effects from other types of electromagnetic
energy.
Do cell phones pose a health hazard?
Many people are concerned that cell phone radiation will cause
cancer or other serious health hazards. The weight of scientific
evidence has not linked cell phones with any health problems.
Very high levels of electromagnetic energy, such as is found in
X-rays and gamma rays, can ionize biological tissues. Ionization
is a process where electrons are stripped away from their normal
locations in atoms and molecules. It can permanently damage
biological tissues including DNA, the genetic material.
Cell phones emit low levels of Radio Frequency (RF) energy. Over
the past 15 years, scientists have conducted hundreds of studies
looking at the biological effects of the radio frequency energy
emitted by cell phones. While some researchers have reported
biological changes associated with RF energy, these studies have
failed to be replicated.
The energy levels associated with radio frequency energy,
including both radio waves and microwaves, are not great
enough to cause ionization of atoms and molecules. Therefore,
RF energy is a type of non-ionizing radiation.
75
Other types of non-ionizing radiation include visible light, infrared
radiation (heat), and other forms of electromagnetic radiation
with relatively low frequencies.
(June, 2010) compared cell phone usage for more than 5,000
people with brain tumors (glioma and meningioma) and a similar
number of healthy controls.
While RF energy does not ionize particles, large amounts can
increase body temperatures and cause tissue damage. Two
areas of the body, the eyes and the testes, are particularly
vulnerable to RF heating because there is relatively little blood
flow in them to carry away excess heat.
Results of this study did NOT show that cell phones caused brain
cancer. In this study, most people had no increased risk of brain
cancer from using cell phones. For people with the heaviest use
of cell phones (an average of more than ½ hour per day, every
day, for over 10 years) the study suggested a slight increase in
brain cancer. However, the authors determined that biases and
errors prevented any conclusions being drawn from this data.
Additional information about Interphone can be found at
Research Results to Date: Is there a connection between RF
and certain health problems?
The results of most studies conducted to date say no. In addition,
attempts to replicate and confirm the few studies that have
shown a connection have failed.
Interphone is the largest cell phone study to date, but it did not
answer all questions about cell phone safety. Additional research
is being conducted around the world, and the FDA continues to
monitor developments in this field.
The scientific community at large therefore believes that the
weight of scientific evidence does not show an association
between exposure to Radio Frequency (RF) from cell phones and
adverse health outcomes. Still the scientific community has
supported additional research to address gaps in knowledge.
Some of these studies are described below.
International Cohort Study on Mobile Phone Users (COSMOS)
The COSMOS study aims to conduct long-term health monitoring
of a large group of people to determine if there are any health
issues linked to long-term exposure to radio frequency energy
from cell phone use. The COSMOS study will follow
approximately 300,000 adult cell phone users in Europe for 20 to
30 years. Additional information about the COSMOS study can be
Interphone Study
Interphone is a large international study designed to determine
whether cell phones increase the risk of head and neck cancer. A
report published in the International Journal of Epidemiology
found at http://www.ukcosmos.org/index.html
.
Health and Safety Information
76
RiskofBrainCancerfromExposuretoRadioFrequencyFields
in Childhood and Adolescence (MOBI-KIDS)
Cell Phone Industry Actions
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the cell phone industry to take a
number of steps, including the following:
MOBI-KIDS is an international study investigating the relationship
between exposure to radio frequency energy from
communication technologies including cell phones and brain
cancer in young people. This is an international multi-center
study involving 14 European and non-European countries.
Additional information about MOBI-KIDS can be found at
•
•
•
Support-needed research on possible biological effects of RF for
the type of signal emitted by cell phones;
Design cell phones in a way that minimizes any RF exposure to the
user; and
Cooperate in providing users of cell phones with the current
information on cell phone use and human health concerns.
.
Surveillance, Epidemiology, and End Results (SEER) Program
of the National Cancer Institute
The FDA also is working with voluntary standard-setting bodies
such as the Institute of Electrical and Electronics Engineers
(IEEE), the International Commission on Non-Ionizing Radiation
Protection (ICNIRP), and others to assure that safety standards
continue to adequately protect the public.
The National Cancer Institute (NCI) actively follows cancer
statistics in the United States to detect any change in rates of
new cases for brain cancer. If cell phones play a role in risk for
brain cancer, rates should go up, because heavy cell phone use
has been common for quite some time in the U.S. Between 1987
and 2005, the overall age-adjusted incidence of brain cancer did
not increase. Additional information about SEER can be found at
.
77
Reducing Exposure: Hands-Free Kits and Other
Accessories
Steps to Reduce Exposure to Radio Frequency Energy
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that hands-free
kits reduce risks. Hands-free kits can be used for convenience
and comfort. They are also required by law in many states if you
want to use your phone while driving.
If there is a risk from being exposed to radio frequency energy
(RF) from cell phones - and at this point we do not know that
there is - it is probably very small. But, if you are concerned
about avoiding even potential risks, you can take a few simple
steps to minimize your RF exposure.
Cell Phone Accessories that Claim to Shield the Head from RF
Radiation
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that accessories
which claim to shield the head from those emissions reduce
risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike “hands-free” kits, these so-called “shields”
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption.
•
•
Reduce the amount of time spent using your cell phone;
Use speaker mode or a headset to place more distance between your
head and the cell phone.
Hands-Free Kits
Hands-free kits may include audio or Bluetooth® headsets and
various types of body-worn accessories such as belt-clips and
holsters. Combinations of these can be used to reduce RF energy
absorption from cell phones.
Headsets can substantially reduce exposure because the phone
is held away from the head in the user's hand or in approved
body-worn accessories. Cell phones marketed in the U.S. are
required to meet RF exposure compliance requirements when
used against the head and against the body.
Health and Safety Information
78
Children and Cell Phones
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(updated 10/1/2010):
The scientific evidence does not show a danger to any users of
cell phones from RF exposure, including children and teenagers.
The steps adults can take to reduce RF exposure apply to
children and teenagers as well.
•
•
•
FCC RF Safety Program:
Environmental Protection Agency (EPA):
•
•
Reduce the amount of time spent on the cell phone;
Use speaker mode or a headset to place more distance between the
head and the cell phone.
Occupational Safety and Health Administration (OSHA):
(Note: This web address is case sensitive.)
Some groups sponsored by other national governments have
advised that children be discouraged from using cell phones at
all. For example, The Stewart Report from the United Kingdom
made such a recommendation in December 2000. In this report,
a group of independent experts noted that no evidence exists that
using a cell phone causes brain tumors or other ill effects. Their
recommendation to limit cell phone use by children was strictly
precautionary; it was not based on scientific evidence that any
health hazard exists.
•
•
•
•
•
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
79
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Specific Absorption Rate (SAR) Certification
Information
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
Radio Frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
These FCC exposure limits are derived from the
recommendations of two expert organizations: the National
Council on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
For body-worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the mobile device a
minimum of 1.5 cm from the body.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
Health and Safety Information
80
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
800 MHz (Cellular) CDMA
obtained at www.fcc.gov/cgb/sar
.
•
•
Head: 0.66 W/kg
Smart Practices While Driving
Body-worn: 0.64 W/kg
On the Road - Off the Phone
1700 MHz (AWS) CDMA
The primary responsibility of every driver is the safe operation of
his or her vehicle.
•
•
Head: 0.79 W/kg
Body-worn: 0.40 W/kg
Responsible drivers understand that no secondary task should be
performed while driving whether it be eating, drinking, talking to
passengers, or talking on a mobile phone - unless the driver has
assessed the driving conditions and is confident that the
secondary task will not interfere with their primary responsibility.
Do not engage in any activity while driving a moving vehicle which
may cause you to take your eyes off the road or become so
absorbed in the activity that your ability to concentrate on the act
of driving becomes impaired. Samsung is committed to promoting
responsible driving and giving drivers the tools they need to
understand and address distractions.
1900 MHz (PCS) CDMA
•
•
Head: 0.94 W/kg
Body-worn: 0.32 W/kg
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
81
Check the laws and regulations on the use of mobile devices and
their accessories in the areas where you drive. Always obey them.
The use of these devices may be prohibited or restricted in certain
areas. For example, only hands-free use may be permitted in
certain areas.
Laws in some states may prohibit mounting this device on or
near the windshield of an automobile. In other states, the law
may permit mounting this device only in specific locations in the
automobile. Be sure to consult the state and local laws or
ordinances where you drive before mounting this device in an
automobile. Failure to comply with these restrictions could result
in fines, penalties, or other damages.
Before answering calls, consider your circumstances. Let the call
go to voicemail when driving conditions require. Remember,
driving comes first, not the call!
Never mount this device in a manner that will obstruct the
driver's clear view of the street and traffic.
If you consider a call necessary and appropriate, follow these
tips:
Never use wireless data services such as text messaging, Web
browsing, or e-mail while operating a vehicle.
•
•
•
•
•
•
Use a hands-free device;
Secure your phone within easy reach;
Place calls when you are not moving;
Plan calls when your car will be stationary;
Do not engage in stressful or emotional conversations;
Never watch videos, such as a movie or clip, or play video games
while operating a vehicle.
.
Let the person with whom you are speaking know that you are driving
and will suspend the call if necessary;
•
Do not take notes or look up phone numbers while driving;
Notice regarding legal restrictions on mounting this device in an
automobile:
Health and Safety Information
82
•
•
Do not handle a damaged or leaking battery. Do not let leaking
battery fluid come in contact with your eyes, skin or clothing. For safe
disposal options, contact your nearest Samsung-authorized service
center.
Battery Use and Safety
Important!: Handle and store batteries properly to avoid injury or damage
.
Most battery issues arise from improper handling of batteries
and, particularly, from the continued use of damaged batteries.
Avoid dropping the cell phone. Dropping the phone or the battery,
especially on a hard surface, can potentially cause damage to the
phone and battery. If you suspect damage to the phone or battery, take
it to a service center for inspection.
•
•
Do not disassemble, crush, puncture, shred, or otherwise attempt
to change the form of your battery. Do not put a high degree of
pressure on the battery. This can cause leakage or an internal short-
circuit, resulting in overheating.
•
•
Never use any charger or battery that is damaged in any way.
Do not let the phone or battery come in contact with liquids.
Liquids can get into the phone's circuits, leading to corrosion. Even
when the phone appears to be dry and appears to operate normally,
the circuitry could slowly corrode and pose a safety hazard. If the
phone and/or battery get wet, have them checked by your service
provider or contact Samsung, even if they appear to be working
properly.
Do not allow the battery to touch metal objects. Accidental
short-circuiting can occur when a metallic object (coin, key, jewelry,
clip, or pen) causes a direct connection between the + and - terminals
of the battery (metal strips on the battery), for example when you carry
a spare battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
Important!: Use only Samsung-approved batteries, and recharge your battery
only with Samsung-approved chargers which are specifically
designed for your phone.
•
Do not place your battery in or near a heat source. Excessive
heating can damage the phone or the battery and could cause the
phone or the battery to explode. Do not dry a wet or damp battery with
an appliance or heat source such as a microwave oven, hair dryer,
iron, or radiator. Avoid leaving your phone in your car in high
temperatures.
Warning!: Use of a non-Samsung-approved battery or charger may present a
risk of fire, explosion, leakage, or other hazard. Samsung's
warranty does not cover damage to the phone caused by non-
Samsung-approved batteries and/or chargers.
•
Do not dispose of the phone or the battery in a fire. The phone or
the battery may explode when overheated.
83
•
•
Do not use incompatible cell phone batteries and chargers. Some
websites and second-hand dealers not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier-recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
Drop It Off
You can drop off your Samsung-branded mobile device and
batteries for recycling at one of our numerous Samsung
Recycling Direct (SM) locations. A list of these locations may be
.
Samsung-branded devices and batteries will be accepted at
these locations for no fee.
Misuse or use of incompatible phones, batteries, and charging
devices could result in damage to the equipment and a possible
risk of fire, explosion, or leakage, leading to serious injuries,
Consumers may also recycle their used mobile device or
batteries at many retail or carrier-provided locations where
mobile devices and batteries are sold. Additional information
regarding specific locations may be found at:
damages to your phone, or other serious hazard
.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile devices and genuine
Samsung accessories.
.
Mail It In
Proper disposal of your mobile device and its battery is not only
important for safety, it benefits the environment. Batteries must
be recycled or disposed of properly.
The Samsung Mobile Take-Back Program will provide Samsung
customers with a free recycling mailing label. Just go to
yle_your_phone_page and follow the instructions to print out a
free pre-paid postage label and then send your old mobile
device or battery to the address listed, via U.S. Mail, for
recycling.
Recycling programs for your mobile device, batteries, and
accessories may not be available in your area.
We've made it easy for you to recycle your old Samsung mobile
device by working with respected take-back companies in every
state in the country.
Health and Safety Information
84
Dispose of unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH
AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
Or call, (877) 278-0799.
Follow local regulations regarding disposal of mobile devices
and batteries
THIS POWER UNIT IS INTENDED TO BE CORRECTLY
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
Dispose of your mobile device and batteries in accordance with
local regulations. In some areas, the disposal of these items in
household or business trash may be prohibited. Help us protect
the environment - recycle!
Display / Touch-Screen
Please note the following information when using your mobile
device:
Warning!: Never dispose of batteries in a fire because they may explode.
WARNING REGARDING DISPLAY
UL Certified Travel Charger
The display on your mobile device is made of glass or
acrylic and could break if your mobile device is dropped or
if it receives significant impact. Do not use if screen is
broken or cracked as this could cause injury to you.
The Travel Charger for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines:
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
85
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN
MOBILE DEVICE
Certain Samsung mobile devices can also use an Assisted Global
Positioning System (AGPS), which obtains information from the
cellular network to improve GPS performance. AGPS uses your
wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with
your service plan. Contact your wireless service provider for
details.
If your mobile device has a touch-screen display, please
note that a touch-screen responds best to a light touch
from the pad of your finger or a non-metallic stylus. Using
excessive force or a metallic object when pressing on the
touch-screen may damage the tempered glass surface
and void the warranty. For more information, please refer
to the “Standard Limited Warranty” on page page 44.
Your Location
Location-based information includes information that can be
used to determine the approximate location of a mobile device.
Mobile devices which are connected to a wireless network
transmit location-based information. Additionally, if you use
applications that require location-based information (e.g. driving
directions), such applications transmit location-based
information. The location-based information may be shared with
third-parties, including your wireless service provider,
applications providers, Samsung, and other third-parties
providing services.
GPS & AGPS
Certain Samsung mobile devices can use a Global Positioning
System (GPS) signal for location-based applications. A GPS uses
satellites controlled by the U.S. Government that are subject to
changes implemented in accordance with the Department of
Defense policy and the 2008 Federal Radio navigation Plan (FRP).
Changes may affect the performance of location-based
technology on your mobile device.
Health and Safety Information
86
Use of AGPS in Emergency Calls
Emergency Calls
When you make an emergency call, the cellular network may
activate AGPS technology in your mobile device to tell the
emergency responders your approximate location.
This mobile device, like any wireless mobile device, operates
using radio signals, wireless and landline networks, as well as
user-programmed functions, which cannot guarantee connection
in all conditions, areas, or circumstances. Therefore, you should
never rely solely on any wireless mobile device for essential
communications (medical emergencies, for example). Before
traveling in remote or underdeveloped areas, plan an alternate
method of contacting emergency services personnel. Remember,
to make or receive any calls, the mobile device must be switched
on and in a service area with adequate signal strength.
AGPS has limitations and might not work in your area. Therefore:
•
Always tell the emergency responder your location to the best of your
ability; and
•
Remain on the mobile device for as long as the emergency responder
instructs you.
Navigation
Maps, directions, and other navigation data may contain
inaccurate or incomplete data, and circumstances can and do
change over time. In some areas, complete information may not
be available. Therefore, you should always visually confirm that
the navigational instructions are consistent with what you see
before following them. All users should pay attention to road
conditions, closures, traffic, and all other factors that may impact
Emergency calls may not be possible on all wireless mobile
device networks or when certain network services and/or mobile
device features are in use. Check with local service providers.
To make an emergency call:
1. If the mobile device is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
safe driving or walking. Always obey posted road signs
.
3. Press
to place the call.
87
If certain features are in use (call blocking, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult your User Manual and your local cellular
service provider. When making an emergency call, remember to
give all the necessary information as accurately as possible.
Remember that your mobile device may be the only means of
communication at the scene of an accident; do not cut off the call
until given permission to do so.
Extreme heat or cold
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.
Microwaves
Do not try to dry your mobile device in a microwave oven.
Doing so may cause a fire or explosion.
Dust and dirt
Do not expose your mobile device to dust, dirt, or sand.
Care and Maintenance
Cleaning solutions
Your mobile device is a product of superior design and
craftsmanship and should be treated with care. The suggestions
below will help you fulfill any warranty obligations and allow you
to enjoy this product for many years:
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the mobile device. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
Shock or vibration
Keep your Samsung Mobile Device away from:
Liquids of any kind
Do not drop, knock, or shake the mobile device. Rough
handling can break internal circuit boards.
Keep the mobile device dry. Precipitation, humidity, and liquids
contain minerals that will corrode electronic circuits. If the
mobile device does get wet, do not accelerate drying with the
use of an oven, microwave, or dryer, because this may damage
the mobile device and could cause a fire or explosion. Do not
use the mobile device with a wet hand. Doing so may cause an
electric shock to you or damage to the mobile device.
Paint
Do not paint the mobile device. Paint can clog the device’s
moving parts or ventilation openings and prevent proper
operation.
Health and Safety Information
88
•
•
•
•
Always turn the volume down before plugging the earphones into an
audio source.
Responsible Listening
Caution!: Avoid potential hearing loss
.
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cell phones, at high volume settings for long durations may lead
to permanent noise-induced hearing loss. This includes the use
of headphones (including headsets, earbuds, and Bluetooth® or
other wireless devices). Exposure to very loud sound has also
been associated in some studies with tinnitus (a ringing in the
ear), hypersensitivity to sound, and distorted hearing. Individual
susceptibility to noise-induced hearing loss and potential hearing
problem varies. Additionally, the amount of sound produced by a
portable audio device varies depending on the nature of the
sound, the device settings, and the headphones that are used. As
a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings, and
equipment.
Be aware that you can adapt to higher volume settings over time, not
realizing that the higher volume may be harmful to your hearing.
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
•
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech, or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You should follow some common sense recommendations when
using any portable audio device:
89
You can obtain additional information on this subject from the
following sources:
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: (800) 222-2336
Voice: 1-800-35-NIOSH (1-800-356-4674)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Email: [email protected]
National Institute on Deafness and Other Communication
Disorders
1-888-232-6348 TTY
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Operating Environment
Remember to follow any special regulations in force in any area,
and always switch your mobile device off whenever it is
forbidden to use it, or when it may cause interference or danger.
When connecting the mobile device or any accessory to another
device, read its user's guide for detailed safety instructions. Do
not connect incompatible products.
Internet: http://www.nidcd.nih.gov/
Health and Safety Information
90
Using Your Mobile Device Near Other Electronic Devices
•
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless mobile device with an implantable medical device,
consult your health care provider.
Most modern electronic equipment is shielded from Radio
Frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
mobile device. Consult the manufacturer to discuss alternatives.
For more information see: http://www.fcc.gov/oet/rfsafety/rf-
.
Implantable Medical Devices
Other Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless mobile device and an implantable
medical device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your mobile
device off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Persons who have such devices:
•
Should ALWAYS keep the mobile device more than six (6) inches from
their implantable medical device when the mobile device is turned ON;
•
•
Should not carry the mobile device in a breast pocket;
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle before
using your mobile device in a motor vehicle. You should also
consult the manufacturer of any equipment that has been added
to your vehicle.
•
Should turn the mobile device OFF immediately if there is any reason
to suspect that interference is taking place;
91
Posted Facilities
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless mobile devices under the Hearing Aid
Compatibility Act of 1988 (HAC Act) to require digital wireless
mobile devices be compatible with hearing aids.
Switch your mobile device off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your mobile device off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death. Users are advised to switch the mobile
device off while at a refueling point (service station). Users are
reminded of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas),
chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities. While some wireless mobile devices are used near
some hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and mobile devices also vary in the amount of
interference they generate.
The wireless telephone industry has developed a rating system
for wireless mobile devices to assist hearing device users find
mobile devices that may be compatible with their hearing
devices. Not all mobile devices have been rated. Mobile devices
that are rated have the rating on their box or a label located on
the box.
Health and Safety Information
92
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated mobile device successfully. Trying out the mobile
device with your hearing device is the best way to evaluate it for
your personal needs.
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use.
M-Ratings: Mobile devices rated M3 or M4 meet FCC
requirements and are likely to generate less interference to
hearing devices than mobile devices that are not labeled. M4 is
the better/higher of the two ratings.
T3
+
T2
=
5
M3
+
M2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless mobile device meets the M3 level rating, the
sum of the two values equal M5. This is synonymous for T
ratings. This should provide the hearing aid user with “normal
usage” while using their hearing aid with the particular wireless
mobile device.
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements
and are likely to generate less interference to hearing devices
than mobile devices that are not labeled. T4 is the better/higher
of the two ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless mobile device rating values are then added together.
“Normal usage” in this context is defined as a signal quality that
is acceptable for normal operation. The M mark is intended to be
synonymous with the U mark. The T mark is intended to be
synonymous with the UT mark. The M and T marks are
recommended by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced in Section
20.19 of the FCC Rules.
93
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Only use approved batteries, antennas, and chargers. The use of
any unauthorized accessories may be dangerous and void the
mobile device warranty if said accessories cause damage or a
defect to the mobile device. Although your mobile device is quite
sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending, or sitting on it.
Restricting Children's Access to Your
Mobile Device
Your mobile device is not a toy. Do not allow children to play with
it because they could hurt themselves and others, damage the
mobile device, or make calls that increase your mobile device
bill.
Other Important Safety Information
•
Only qualified personnel should service the mobile device or install the
mobile device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
Keep the mobile device and all its parts and accessories out of
the reach of small children.
•
•
•
Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted.
FCC Notice and Cautions
FCC Notice
Check regularly that all wireless mobile device equipment in your
vehicle is mounted and operating properly.
The mobile device may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can require you
to stop using the mobile device if such interference cannot be
eliminated. Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association.
Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the mobile device, its parts, or
accessories.
•
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including installed or
portable wireless equipment near or in the area over the air bag or in
the air bag deployment area. If wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Cautions
Any changes or modifications to your mobile device not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment.
Health and Safety Information
94
•
•
Switch your mobile device off before boarding an aircraft. The use of
wireless mobile devices in aircraft is illegal and may be dangerous to
the aircraft's operation. Check with appropriate authorities before
using any function of a mobile device while on an aircraft.
Failure to observe these instructions may lead to the suspension or
denial of cell phone services to the offender, or legal action, or both.
95
Section 14: Warranty Information
Standard Limited Warranty
scratches, dents and cosmetic damage, unless caused by SAMSUNG; (c)
defects or damage resulting from excessive force or use of a metallic
object when pressing on a touch screen; (d) equipment that has the
serial number or the enhancement data code removed, defaced,
damaged, altered or made illegible; (e) ordinary wear and tear; (f)
defects or damage resulting from the use of Product in conjunction or
connection with accessories, products, or ancillary/peripheral equipment
not furnished or approved by SAMSUNG; (g) defects or damage resulting
from improper testing, operation, maintenance, installation, service, or
adjustment not furnished or approved by SAMSUNG; (h) defects or
damage resulting from external causes such as collision with an object,
fire, flooding, dirt, windstorm, lightning, earthquake, exposure to
weather conditions, theft, blown fuse, or improper use of any electrical
source; (i) defects or damage resulting from cellular signal reception or
transmission, or viruses or other software problems introduced into the
Product; or (j) Product used or purchased outside the United States. This
Limited Warranty covers batteries only if battery capacity falls below
80% of rated capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been charged by a
battery charger not specified or approved by SAMSUNG for charging the
battery; (ii) any of the seals on the battery are broken or show evidence
of tampering; or (iii) the battery has been used in equipment other than
the SAMSUNG phone for which it is specified.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the first consumer purchaser ("Purchaser") that
SAMSUNG's handsets and accessories ("Products") are free from
defects in material and workmanship under normal use and
service for the period commencing upon the date of purchase
and continuing for the following specified period of time after that
date:
Phone
1 Year
1 Year
90 Days
1 Year
Batteries
Case/Pouch/Holster
Other Phone Accessories
What is Not Covered?
This Limited Warranty is conditioned upon proper use of Product by
Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abnormal use, abnormal conditions,
improper storage, exposure to liquid, moisture, dampness, sand or dirt,
neglect, or unusual physical, electrical or electromechanical stress; (b)
Warranty Information
96
What are SAMSUNG's Obligations?
Product, please call SAMSUNG Customer Care at 1-888-987-
4357. If SAMSUNG determines that any Product is not covered
by this Limited Warranty, Purchaser must pay all parts, shipping,
and labor charges for the repair or return of such Product.
During the applicable warranty period, provided the Product is
returned in accordance with the terms of this Limited Warranty,
SAMSUNG will repair or replace the Product, without charge to
Purchaser, or at SAMSUNG'S sole option, refund the purchase
price. SAMSUNG may, at SAMSUNG's sole option, use rebuilt,
reconditioned, or new parts or components when repairing any
Product, or may replace Product with a rebuilt, reconditioned or
new Product. Repaired/replaced cases, pouches and holsters will
be warranted for a period of ninety (90) days. All other repaired/
replaced Products will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product
or for 90 days, whichever is longer. All replaced Products, parts,
components, boards and equipment shall become the property of
SAMSUNG. This Limited Warranty is extended to the Purchaser
and is not transferable or assignable to any other person or
entity.
Purchaser should keep a separate backup copy of any contents
of the Product before delivering the Product to SAMSUNG for
warranty service, as some or all of the contents may be deleted
or reformatted during the course of warranty service.
What Are The Limits On SAMSUNG’s liability?
THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF SAMSUNG'S
RESPONSIBILITIES, AND THE EXCLUSIVE REMEDY REGARDING THE
PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL SAMSUNG BE LIABLE FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR
FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF
USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS OR
SAVINGS; INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
PUNITIVE DAMAGES; OR DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR
What must you do to obtain warranty service?
To obtain service under this Limited Warranty, Purchaser must
return the Product to an authorized phone service facility in an
adequate container for shipping, accompanied by the sales
receipt or comparable proof of sale showing the original date of
purchase, the serial number of the Product and the seller's name
and address. To obtain assistance on where to deliver the
97
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND
DISCLAIMERS MAY NOT APPLY TO YOU.
What is the procedure for resolving disputes?
ALL DISPUTES WITH SAMSUNG ARISING IN ANY WAY FROM THIS
LIMITED WARRANTY OR THE SALE, CONDITION OR
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH
THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE. RESPONSIBILITY FOR THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT RESTS SOLELY
WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.
PERFORMANCE OF THE PRODUCTS SHALL BE RESOLVED
EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND
NOT BY A COURT OR JURY. Any such dispute shall not be
combined or consolidated with a dispute involving any other
person's or entity's Product or claim, and specifically, without
limitation of the foregoing, shall not under any circumstances
proceed as part of a class action. The arbitration shall be
conducted before a single arbitrator, whose award may not
exceed, in form or amount, the relief allowed by the applicable
law. The arbitration shall be conducted according to the
American Arbitration Association (AAA) Commercial Arbitration
Rules applicable to consumer disputes. This arbitration provision
is entered pursuant to the Federal Arbitration Act. The laws of the
State of Texas, without reference to its choice of laws principles,
shall govern the interpretation of the Limited Warranty and all
disputes that are subject to this arbitration provision. The
arbitrator shall decide all issues of interpretation and application
of this arbitration provision and the Limited Warranty.
Nothing in the Product instructions or information shall be construed to
create an express warranty of any kind with respect to the Products. No
agent, employee, dealer, representative or reseller is authorized to
modify or extend this Limited Warranty or to make binding
representations or claims, whether in advertising, presentations or
otherwise, on behalf of SAMSUNG regarding the Products or this Limited
Warranty.
This Limited Warranty gives you specific legal rights, and you may also
have other rights that vary from state to state.
Warranty Information
98
For any arbitration in which the Purchaser's total damage claims,
exclusive of attorney fees and expert witness fees, are $5,000.00
or less ("Small Claim"), the arbitrator may, if the Purchaser
prevails, award the Purchaser's reasonable attorney fees, expert
witness fees and costs as part of any award, but may not grant
SAMSUNG its attorney fees, expert witness fees or costs unless it
is determined that the claim was brought by the Purchaser in bad
faith. In a Small Claim case, the Purchaser shall be required to
pay no more than half of the total administrative, facility and
arbitrator fees, or $50.00 of such fees, whichever is less, and
SAMSUNG shall pay the remainder of such fees. Administrative,
facility and arbitrator fees for arbitrations in which the
Purchaser's total damage claims, exclusive of attorney fees and
expert witness fees, exceed $5,000.00 ("Large Claim") shall be
determined according to AAA rules. In a Large Claim case, the
arbitrator may grant to the prevailing party, or apportion among
the parties, reasonable attorney fees, expert witness fees and
costs. Judgment may be entered on the arbitrator's award in any
court of competent jurisdiction.
Purchaser may opt out of this dispute resolution procedure by
providing notice to SAMSUNG no later than 30 calendar days
from the date of Purchaser's original purchase of the Product. To
opt out, Purchaser must send notice by e-mail to
[email protected], with the subject line: "Arbitration Opt
Out." Purchaser must include in the opt out e-mail (a)
Purchaser's name and address; (b) the date on which the Product
was purchased; (c) the Product model name or model number;
and (d) the IMEI or MEID or Serial Number, as applicable, if
Purchaser has it (the IMEI or MEID or Serial Number can be found
(i) on the Product box; (ii) on the Product information screen,
which can be found under "Settings;" (iii) on a label on the back
of the Product beneath the battery, if the battery is removable;
and (iv) on the outside of the Product if the battery is not
removable). Alternatively, Purchaser may opt out by calling 1-
888-987-4357 and providing the same information. These are
the only two forms of notice that will be effective to opt out of this
dispute resolution procedure. Opting out of this dispute resolution
procedure will not affect the coverage of the Limited Warranty in
any way, and Purchaser will continue to enjoy the benefits of the
Limited Warranty.
This arbitration provision also applies to claims against
SAMSUNG'S employees, representatives and affiliates if any
such claim arises from the Product's sale, condition or
performance.
99
Severability
End User License Agreement for Software
If any portion of this Limited Warranty is held to be illegal or
unenforceable, such partial illegality or unenforceability shall not
affect the enforceability of the remainder of the Limited Warranty.
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, AND DISCONTINUE USE OF THE SOFTWARE.
Samsung Telecommunications America, LLC
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America, LLC. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change without
notice. [050611]
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
Warranty Information
100
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
101
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
must cease all use of the Software and destroy all copies, full or
partial, of the Software.
party or its products and services. Purchaser agrees that
SAMSUNG shall not be responsible or liable, directly or indirectly,
for any damage or loss caused or alleged to caused by, or in
connection with, use of or reliance on any such third-party
content, products, or services available on or through any such
application. Purchaser acknowledges and agrees that your use
of any third-party application is governed by such third-party
application provider's Terms of Use, License Agreement, Privacy
Policy, or other such agreement and that any information or
personal data you provide, whether knowingly or unknowingly, to
such third-party application provider, will be subject to such
third-party application provider's privacy policy, if such a policy
exists. SAMSUNG DISCLAIMS ANY RESPONSIBILITY FOR ANY
DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF
ANY THIRD-PARTY APPLICATION PROVIDER.
9. THIRD-PARTY APPLICATIONS. Certain third-party applications
may be included with, or downloaded to this mobile device.
SAMSUNG makes no representations whatsoever about any of
these applications. Since SAMSUNG has no control over such
applications, Purchaser acknowledges and agrees that
SAMSUNG is not responsible for the availability of such
applications and is not responsible or liable for any content,
advertising, products, services, or other materials on or available
from such applications. Purchaser expressly acknowledges and
agrees that use of third-party applications is at Purchaser's sole
risk and that the entire risk of unsatisfactory quality,
10. Disclaimer of Warranty Regarding Third-Party Applications.
SAMSUNG DOES NOT WARRANT OR MAKE ANY
performance, accuracy and effort is with Purchaser. It is up to
Purchaser to take precautions to ensure that whatever Purchaser
selects to use is free of such items as viruses, worms, Trojan
horses, and other items of a destructive nature. References on
this mobile device to any names, marks, products, or services of
any third-parties are provided solely as a convenience to
Purchaser, and do not constitute or imply an endorsement,
sponsorship, or recommendation of, or affiliation with the third-
REPRESENTATIONS REGARDING THE AVAILABILITY, USE,
TIMELINESS, SECURITY, VALIDITY, ACCURACY, OR RELIABILITY OF,
OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING,
THE CONTENT OF ANY THIRD-PARTY APPLICATION WHETHER
SUCH THIRD-PARTY APPLICATION IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG, IS DOWNLOADED, OR
OTHERWISE OBTAINED. USE OF ANY THIRD-PARTY APPLICATION
IS DONE AT PURCHASER'S OWN DISCRETION AND RISK AND
Warranty Information
102
PURCHASER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO
YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM
THE DOWNLOADING OR USE OF SUCH THIRD-PARTY
APPLICATIONS. SAMSUNG EXPRESSLY DISCLAIMS ANY
WARRANTY REGARDING WHETHER PURCHASER'S PERSONAL
INFORMATION IS CAPTURED BY ANY THIRD-PARTY APPLICATION
PROVIDER OR THE USE TO WHICH SUCH PERSONAL
ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY
APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW
EXCLUSIONS OR LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION,
WHETHER ORAL OR WRITTEN, OBTAINED BY PURCHASER FROM
SAMSUNG SHALL BE DEEMED TO ALTER THIS DISCLAIMER OF
WARRANTY REGARDING THIRD-PARTY APPLICATIONS, OR TO
CREATE ANY WARRANTY.
INFORMATION MAY BE PUT BY SUCH THIRD-PARTY APPLICATION
PROVIDER. ANY THIRD-PARTY APPLICATIONS PROVIDED WITH
THIS MOBILE DEVICE ARE PROVIDED "AS IS" AND ON AN "AS
AVAILABLE" BASIS, WITHOUT WARRANTIES OF ANY KIND FROM
SAMSUNG, EITHER EXPRESS OR IMPLIED. TO THE FULLEST
EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, SAMSUNG
DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR
WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE,
RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES,
QUIET ENJOYMENT, NON-INFRINGEMENT OF THIRD PARTY
RIGHTS OR OTHER VIOLATION OF RIGHTS. SAMSUNG DOES NOT
WARRANT AGAINST INTERFERENE WITH YOUR ENJOYMENT OF
THE THRID-PARTY APPLICATION, THAT THE FUNCTIONS
CONTAINED IN THE THIRD-PARTY APPLICATION WILL MEET
PURCHASER'S REQUIREMENTS, THAT THE OPERATION OF THE
THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR
11. Limitation of Liability. SAMSUNG WILL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO
THE USE OR THE INABILITY TO USE ANY THIRD-PARTY
APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT
NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO
ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN
OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO
CONNECT, NETWORK CHARGES, AND ALL OTHER DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
103
NOTWITHSTANDING THE FOREGOING, SAMSUNG'S TOTAL
LIABILITY TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES
OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON
CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF
PURCHASER'S USE OF THIRD-PARTY APPLICATIONS ON THIS
MOBILE DEVICE, OR ANY OTHER PROVISION OF THIS EULA,
SHALL NOT EXCEED THE AMOUNT PURCHASER PAID
SPECIFICALLY FOR ANY SUCH THIRD-PARTY APPLICATION THAT
WAS INCLUDED WITH THIS MOBILE DEVICE. THE FOREGOING
LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING
SECTIONS 9, 10, AND 11) SHALL APPLY TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY
FAILS ITS ESSENTIAL PURPOSE.
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Warranty Information
104
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
105
Index
Settings 63
Adding 43
Deleting 50
Editing 44
Finding 42
Groups 48
D
Display 66
Display Settings
A
Adding a New Contacts Entry
Adjust
C
Calculator 64
Call Functions
Call Settings
Contacts
Alerts 67
Backlight 67
Wallpaper 66
Do cell phones pose a health hazard?
B
Backlight 67
Battery
charging 8
installing 7
removing 7
Bluetooth 62
E
Add New Device 62
106
Exposure to Radio Frequency (RF) Sig-
nals 75
L
Messages
Creating 33
Messaging
metroWeb
Language 69
M
Memory Card
formatting 11
installing 10
removing 11
Message Folder
Inbox 36
Outbox 37
Voice 40
Voicemail 40
Message folder
outbox 37
Message Folders
F
FCC Hearing Aid Compatibility (HAC)
G
Gallery
Image 56
Getting Started
Voicemail 10
H
Mode
Speakerphone 20
N
Navigator 61
O
I
Icons
107
Restriction 71
Wallpaper 66
Settings Menu
Accessing 66
P
Phone
S
Phone Settings
Language 69
Sound Settings
Specific Absorption Rate (SAR) Certifi-
Standard Limited Warranty
T
Tools
Samsung Mobile Products and Recy-
cling 84
Security Settings
Restriction 71
Settings
Backlight 67
Language 69
Security 70
Photos
Sending 51
Picture Messages
R
Reducing Exposure
Hands-Free Kits and Other
Accessories 78
Bluetooth 62
Calculator 64
Converter 65
Restricting Children's Access to Your
108
|