About this manual
•
•
Default applications that come with the device are subject to updates and may no longer
be supported without prior notice. If you have questions about an application provided
with the device, contact a Samsung Service Centre. For user-installed applications,
contact service providers.
Modifying the device’s operating system or installing softwares from unofficial sources
may result in device malfunctions and data corruption or loss. These actions are violations
of your Samsung licence agreement and will void your warranty.
Instructional icons
Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Note: notes, usage tips, or additional information
Copyright
Copyright © 2013 Samsung Electronics
This guide is protected under international copyright laws.
No part of this guide may be reproduced, distributed, translated, or transmitted in any form or
by any means, electronic or mechanical, including photocopying, recording, or storing in any
information storage and retrieval system, without the prior written permission of Samsung
Electronics.
3
About this manual
Trademarks
•
SAMSUNG and the SAMSUNG logo are registered trademarks of Samsung Electronics.
•
The Android logo, Google , Google Maps , Google Mail , YouTube , Google Play
™
™
™
™
™
Store, and Google Talk are trademarks of Google, Inc.
™
•
•
Bluetooth is a registered trademark of Bluetooth SIG, Inc. worldwide.
®
Wi-Fi , Wi-Fi Protected Setup , Wi-Fi Direct , Wi-Fi CERTIFIED , and the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
®
™
™
™
•
All other trademarks and copyrights are the property of their respective owners.
4
Getting started
Device layout
Earpiece
Power button
Touch screen
Home button
Menu button
Back button
Microphone
Multipurpose jack
GPS antenna
Rear camera
Speaker
Headset jack
Volume button
Back cover
Main antenna
7
Getting started
•
Do not cover the antenna area with your hands or other objects. This may cause
connectivity problems or drain the battery.
•
•
Do not use a screen protector. This causes sensor malfunctions.
Do not allow water to contact the touch screen. The touch screen may malfunction
in humid conditions or when exposed to water.
Buttons
Button
Function
•
•
Press and hold to turn the device on or off.
Press and hold for 8-10 seconds to reset the device if it has
fatal errors or hang-ups, or freezes.
Power
•
Press to lock or unlock the device. The device goes into lock
mode when the touch screen turns off.
•
•
•
•
Tap to open a list of options available for the current screen.
Tap and hold on the Home screen to launch Google search.
Press to return to the Home screen.
Menu
Home
Back
Press and hold to open the list of recent applications.
•
Tap to return to the previous screen.
•
Volume
Press to adjust the device volume.
8
Getting started
Package contents
Check the product box for the following items:
•
•
•
Device
Battery
Quick start guide
Use only Samsung-approved software. Pirated or illegal software may cause damage
or malfunctions, which are not covered by the warranty.
•
The items supplied with the device and any available accessories may vary
depending on the region or service provider.
•
The supplied items are designed only for this device and may not be compatible
with other devices.
•
•
Appearances and specifications are subject to change without prior notice.
You can purchase additional accessories from your local Samsung retailer. Make
sure they are compatible with the device before purchase.
•
•
Other accessories may not be compatible with your device.
Use only Samsung-approved accessories. Malfunctions caused by using
unapproved accessories are not covered by the warranty service.
•
Availability of all accessories is subject to change depending entirely on
manufacturing companies. For more information about available accessories, refer
to the Samsung website.
9
Getting started
Installing the SIM or USIM card and battery
Insert the SIM or USIM card provided by the mobile telephone service provider, and the
included battery.
Only microSIM cards work with the device.
Remove the back cover.
1
Be careful not to damage your fingernails when you remove the back cover.
Do not bend or twist the back cover excessively. Doing so may damage the cover.
Insert the SIM or USIM card with the gold-coloured contacts facing downwards.
2
10
Getting started
•
•
Do not remove the protective tape covering the antenna, as this can damage the
antenna.
Do not insert a memory card into the SIM card slot. If a memory card happens to
be lodged in the SIM card slot, take the device to a Samsung Service Centre to
remove the memory card.
•
Use caution not to lose or let others use the SIM or USIM card. Samsung is not
responsible for any damages or inconveniences caused by lost or stolen cards.
Insert the battery.
3
4
2
1
Replace the back cover.
11
Getting started
Removing the SIM or USIM card and battery
Remove the back cover.
1
Pull out the battery.
2
Pull out the SIM or USIM card.
3
12
Getting started
Charging the battery
Use the charger to charge the battery before using it for the first time. A computer can be also
used to charge the device by connecting them via the USB cable.
Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or
cables can cause the battery to explode or damage the device.
•
When the battery power is low, the device emits a warning tone and displays a low
battery power message.
•
If the battery is completely discharged, the device cannot be turned on
immediately when the charger is connected. Allow a depleted battery to charge for
a few minutes before turning on the device.
Charging with the charger
Connect the USB cable to the USB power adaptor and then plug the end of the USB cable into
the multipurpose jack.
Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
13
Getting started
•
•
•
The device can be used while it is charging, but it may take longer to fully charge
the battery.
If the device receives an unstable power supply while charging, the touch screen
may not function. If this happens, unplug the charger from the device.
While charging, the device may heat up. This is normal and should not affect the
device’s lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
•
If the device is not charging properly, take the device and the charger to a
Samsung Service Centre.
After fully charging, disconnect the device from the charger. First unplug the charger from the
device, and then unplug it from the electric socket.
Do not remove the battery before removing the charger. This may damage the
device.
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The device should remain close to the electric socket
while charging.
Checking the battery charge status
When you charge the battery while the device is off, the following icons will show the current
battery charge status:
Charging
Fully charged
14
Getting started
Reducing the battery consumption
Your device provides options that help you save battery power. By customising these options
and deactivating features in the background, you can use the device longer between charges:
•
•
•
•
•
•
•
When you are not using the device, switch to sleep mode by pressing the Power button.
Close unnecessary applications with the task manager.
Deactivate the Bluetooth feature.
Deactivate the Wi-Fi feature.
Deactivate auto-syncing of applications.
Decrease the backlight time.
Decrease the brightness of the display.
Inserting a memory card
Your device accepts memory cards with maximum capacities of 32 GB. Depending on the
memory card manufacturer and type, some memory cards may not be compatible with your
device.
•
Some memory cards may not be fully compatible with the device. Using an
incompatible card may damage the device or the memory card, or corrupt the data
stored in it.
•
•
Use caution to insert the memory card right-side up.
The device supports only the FAT file system for memory cards. When inserting a
card formatted in a different file system, the device asks to reformat the memory
card.
•
•
Frequent writing and erasing of data shortens the lifespan of memory cards.
When inserting a memory card into the device, the memory card’s file directory
appears in the extSdCard folder under the internal memory.
15
Getting started
Remove the back cover.
1
2
Insert a memory card with the gold-coloured contacts facing downwards.
Replace the back cover.
3
Removing the memory card
Before removing the memory card, first unmount it for safe removal. On the Home screen, tap
→
→
→
Settings Storage Unmount SD card
.
Remove the back cover.
Pull out the memory card.
Replace the back cover.
1
2
3
Do not remove the memory card while the device is transferring or accessing
information. Doing so can cause data to be lost or corrupted or damage to the
memory card or device. Samsung is not responsible for losses that result from the
misuse of damaged memory cards, including the loss of data.
16
Getting started
Formatting the memory card
A memory card formatted on a computer may not be compatible with the device. Format the
memory card on the device.
→
→
→
→
On the Home screen, tap
Settings Storage Format SD card Format SD card
→
Erase everything
.
Before formatting the memory card, remember to make backup copies of all
important data stored on the device. The manufacturer’s warranty does not cover loss
of data resulting from user actions.
Turning the device on and off
When turning on the device for the first time, follow the on-screen instructions to set up your
device.
Press and hold the Power button for a few seconds to turn on the device.
•
•
Follow all posted warnings and directions from authorised personnel in areas
where the use of wireless devices is restricted, such as aeroplanes and hospitals.
Press and hold the Power button and tap Flight mode to disable the wireless
features.
To turn off the device, press and hold the Power button, and then tap Power off
.
17
Getting started
Holding the device
Do not cover the antenna area with your hands or other objects. This may cause connectivity
problems or drain the battery.
Locking and unlocking the device
When not in use, lock the device to prevent unwanted operation. Pressing the Power button
turns off the screen and puts the device into lock mode. The device automatically gets locked
if it is not used for a specified period.
To unlock the device, press the Power button or the Home button when the touch screen is
turned off, tap anywhere on the screen, and then flick your finger in any direction.
Adjusting the volume
Press the Volume button up or down to adjust the ringtone volume, or to adjust the sound
volume when playing music or video.
Switching to silent mode
Use one of the following methods:
•
•
•
Press and hold the Volume button down until it switches to silent mode.
Press and hold the Power button, and then tap Mute or Vibrate
.
Open the notifications panel at the top of the screen, and then tap Sound or Vibrate
.
18
Basics
Indicator icons
The icons displayed at the top of the screen provide information about the status of the
device. The icons listed in the table below are most common.
Icon
Meaning
No signal
Signal strength
Roaming (outside of normal service area)
GPRS network connected
EDGE network connected
UMTS network connected
HSDPA network connected
Wi-Fi connected
Bluetooth feature activated
GPS activated
Call in progress
Missed call
Synced with the web
Connected to computer
No SIM or USIM card
New text or multimedia message
Alarm activated
Silent mode activated
Vibration mode activated
Flight mode activated
19
Basics
Icon
Meaning
Error occurred or caution required
Battery power level
Using the touch screen
Use only fingers to use the touch screen.
•
•
•
•
Do not allow the touch screen to come into contact with other electrical devices.
Electrostatic discharges can cause the touch screen to malfunction.
Do not allow the touch screen to contact water. The touch screen may malfunction
in humid conditions or when exposed to water.
To avoid damaging the touch screen, do not tap it with anything sharp or apply
excessive pressure to it with your fingertips.
Leaving the touch screen idle for extended periods may result in afterimages
(screen burn-in) or ghosting. Turn off the touch screen when you do not use the
device.
Finger gestures
Tapping
To open an application, to select a menu item, to press an on-screen button, or to enter a
character using the on-screen keyboard, tap it with a finger.
20
Basics
Dragging
To move an icon, thumbnail, or preview to a new location, tap and hold it and drag it to the
target position.
Double-tapping
Double-tap on a webpage, map, or image to zoom in a part. Double-tap again to return.
21
Basics
Flicking
Flick left or right on the Home screen or the Applications screen to see another panel. Flick up
or down to scroll through a webpage or a list, such as contacts.
Pinching
Spread two fingers apart on a webpage, map, or image to zoom in a part. Pinch to zoom out.
22
Basics
Control motions
Simple motions allow easy control of the device.
Before using motions, make sure the motion feature is activated. On the Home screen, tap
→
→
Settings Motion, and then drag the Motion switch to the right.
Excessive shaking or impact to the device may result in unintended inputs. To learn
→
→
→
how to control motions properly, tap
Settings Motion Learn about
Rotating the screen
Many applications allow display in either portrait or landscape orientation. Rotating the
device causes the display to automatically adjust to fit the new screen orientation.
To prevent the display from rotating automatically, open the notifications panel and deselect
Screen rotation
.
•
•
Some applications do not allow screen rotation.
Some applications display a different screen depending on the orientation. The
calculator turns into a scientific calculator when rotated to landscape.
23
Basics
Turning over
Turn over the device to mute ringtone, pause media playback, or mute the FM radio (when
using the speaker).
Shaking
•
Shake the device to search for Bluetooth devices.
•
Shake the device to update the list of emails or information from AccuWeather.
Updates will not work for widgets on the Home screen.
24
Basics
Notifications
Notification icons appear on the status bar at the top of the screen to report missed calls, new
messages, calendar events, device status, and more. Drag down from the status bar to open
the notifications panel. Scroll the list to see additional alerts. To close the notifications panel,
drag up the bar that is at the bottom of the screen.
From the notifications panel, you can view your device’s current status and use the following
options:
•
•
•
Wi-Fi: Activate or deactivate the Wi-Fi feature.
GPS: Activate or deactivate the GPS feature.
Sound: Activate or deactivate silent mode. You can vibrate or mute your device in silent
mode.
•
•
•
•
Screen rotation: Allow or prevent the interface from rotating when you rotate the device.
Bluetooth: Activate or deactivate the Bluetooth feature.
Mobile data: Activate or deactivate the data connection.
Blocking mode: Activate or deactivate blocking mode. In blocking mode, the device will
→
block notifications. To select which notifications will be blocked, tap Settings Blocking
mode
.
•
Sync: Activate or deactivate auto-syncing of applications.
The available options may vary depending on the region or service provider.
25
Basics
Home screen
The Home screen is the starting point to access all of the device’s features. It displays indicator
icons, widgets, shortcuts to applications, and others.
The Home screen can have multiple panels. To view other panels, scroll left or right.
Rearranging items
Adding an application icon
On the Home screen, tap , tap and hold an application icon, and then drag it into a panel
preview.
Adding an item
Customise the Home screen by adding widgets or folders.
Tap and hold the empty area on the Home screen, and then select one of the following
categories:
•
•
Apps and widgets: Add widgets or applications to the Home screen.
Folder: Create a new folder.
Moving an item
Tap and hold an item and drag it to a new location. To move it to another panel, drag it to the
side of the screen.
Removing an item
Tap and hold an item, and drag it to the rubbish bin that appears at the top of the Home
screen. When the rubbish bin turns red, release the item.
26
Basics
Rearranging panels
Adding a new panel
→
→
Tap
Edit page
.
Moving a panel
→
Tap
Edit page, tap and hold a panel preview, and then drag it to a new location.
Removing a panel
→
Tap
Edit page, tap and hold a panel preview, and then drag it to the rubbish bin at the
bottom of the screen.
Setting wallpaper
Set an image or photo stored in the device as wallpaper for the Home screen.
→
→
On the Home screen, tap
following:
Set wallpaper Home screen, and then select one of the
•
Gallery: See photos taken by the device’s camera or images downloaded from the
Internet.
•
•
Live wallpapers: See animated images.
Wallpapers: See wallpaper images.
Then, select an image and tap Set wallpaper. Or, select an image, resize it by dragging the
frame, and then tap Done
.
27
Basics
Using applications
This device can run many different types of applications, ranging from media to Internet
applications.
Opening an application
On the Home screen or the Applications screen, select an application icon to open it.
Opening from recently-used applications
Press and hold the Home button to open the list of recently-used applications.
Select an application icon to open.
Closing an application
Close applications not in use to save battery power and maintain device performance.
Press and hold the Home button, tap , and then tap End next to an application to close it.
To close all running applications, tap End all. Alternatively, press and hold the Home button,
and then tap
.
Applications screen
The Applications screen displays icons for all applications, including any new applications
installed.
On the Home screen, tap to open the Applications screen.
To view other panels, scroll left or right.
Rearranging applications
This feature is available only in the customisable grid view.
→
Tap
Edit, tap and hold an application, and then drag it to a new location. To move it to
another panel, drag it to the side of the screen.
28
Basics
Organising with folders
Put related applications together in a folder for convenience.
→
Tap
Edit, tap and hold an application, and then drag it to Create folder. Enter a folder
name and then tap OK. Put applications into the new folder by dragging, and then tap Save
to save the arrangement.
Rearranging panels
Pinch on the screen, tap and hold a panel preview, and then drag it to a new location.
Installing applications
Use application stores, such as Samsung Apps, to download and install applications.
Uninstalling applications
→
Tap
Uninstall, and then select an application to uninstall it.
Default applications that come with the device cannot be uninstalled.
Sharing applications
Share downloaded applications with other users via email, Bluetooth, or other methods.
→
Tap
Share apps, select applications, tap Done, and then select a sharing method. The
next steps vary depending on the method selected.
29
Basics
Entering text
Use the Samsung keyboard or the voice input feature to enter text.
Text entry is not supported in some languages. To enter text, you must change the
input language to one of the supported languages.
Changing the keyboard type
Tap any text field, open the notifications panel, tap Choose input method, and then select
the type of keyboard to use.
Using the Samsung keyboard
Changing the keyboard layout
→
Tap
Portrait keyboard types, and then tap Qwerty keyboard or 3x4 keyboard.
On the 3x4 keyboard, a key has three or four characters. To enter a character, tap
repeatedly the key corresponding to the character.
Set options for the Samsung
keyboard.
Delete a preceding character.
Enter uppercase.
Break to the next line.
Enter numerals and punctuation
marks.
Enter a space.
Entering uppercase
Tap before entering a character. For all caps, tap it twice.
Changing language keyboards
Add languages to the keyboard, and then slide the space key left or right to change language
keyboards.
30
Basics
Entering text by voice
Activate the voice input feature and then speak into the microphone. The device displays
what you speak.
If the device does not recognise your words correctly, tap the underlined text and select an
alternative word or phrase from the dropdown list.
To change the language or add languages for the voice recognition, tap the current language.
Copying and pasting
Tap and hold over text, drag or to select more or less text, and then tap to copy or
to cut. The selected text is copied to the clipboard.
To paste it into a text entry field, tap and hold at the point where it should be inserted, and
then tap Paste
.
Connecting to a Wi-Fi network
Connect the device to a Wi-Fi network to use the Internet or share media files with other
Turning Wi-Fi on and off
Open the notifications panel, and then tap Wi-Fi to turn it on or off.
Turn off Wi-Fi to save the battery when not in use.
Joining Wi-Fi networks
→
On the Applications screen, tap Settings Wi-Fi, and then drag the Wi-Fi switch to the right.
Select a network from the list of detected Wi-Fi networks, enter a password if necessary, and
then tap Connect. Networks that require a password appear with a lock icon. After the device
connects to a Wi-Fi network, the device will automatically connect to it any time it is available.
31
Basics
Adding Wi-Fi networks
If the desired network does not appear in the networks list, tap Add Wi-Fi network at the
bottom of the networks list. Enter the network name in Network SSID, select the security
type and enter the password if it is not an open network, and then tap Save
.
Forgetting Wi-Fi networks
Any network that has ever been used, including the current network, can be forgotten so the
device will not automatically connect to it. Select the network in the networks list, and then
tap Forget
.
Setting up accounts
Google applications, such as Play Store, require a Google account, and Samsung Apps
requires a Samsung account. Create Google and Samsung accounts to have the best
experience with the device.
Adding accounts
Follow the instructions that appear when opening a Google application without signing in to
set up a Google account.
→
To sign in with or sign up for a Google account, on the Applications screen, tap Settings
→
Add account Google. After that, tap New to sign up, or tap Existing, and then follow on-
screen instructions to complete the account setup. More than one Google account can be
used on the device.
Set up a Samsung account as well.
Removing accounts
On the Applications screen, tap Settings, select an account name under Accounts, select the
account to remove, and then tap Remove account
.
32
Basics
Transferring files
Move audio, video, image, or other types of files from the device to the computer, or vice
versa.
The following file formats are supported by some applications. Some file formats are
not supported depending on the version of the device’s software or the computer
operating system.
•
•
•
•
Music: mp3, m4a, mp4, 3gp, 3ga, ogg, oga, aac, and flac
Image: bmp, gif, jpg, and png
Video: 3gp, mp4, mkv, and webm
Document: doc, docx, docm, dot, dotx, dotm, xls, xlsx, xlsm, xla, xlam, xlt, xltm, xltx,
ppt, pptx, pot, potx, potm, ppsx, ppsm, pdf, and txt
Connecting with Samsung Kies
Samsung Kies is a computer application that manages media libraries, contacts, and
calendars, and syncs them with Samsung devices. Download the latest Samsung Kies from
the Samsung website.
Connect the device to the computer using the USB cable.
1
Samsung Kies launches on the computer automatically. If Samsung Kies does not launch,
double-click the Samsung Kies icon on the computer.
Transfer files between your device and the computer.
2
Refer to the Samsung Kies help for more information.
Connecting with Windows Media Player
Ensure that Windows Media Player is installed on the computer.
Connect the device to the computer using the USB cable.
1
Open Windows Media Player and sync music files.
2
33
Basics
Connecting as a media device
Connect the device to the computer using the USB cable.
1
→
Open the notifications panel, and then tap Connected as a media device Media
2
device (MTP)
.
Tap Camera (PTP) if your computer does not support Media Transfer Protocol (MTP) or
not have any appropriate driver installed.
Transfer files between your device and the computer.
3
Securing the device
Prevent others from using or accessing personal data and information stored in the device by
using the security features. The device requires an unlock code whenever unlocking it.
Setting a pattern
→
→
→
On the Applications screen, tap Settings Lock screen Screen lock Pattern
.
Draw a pattern by connecting four dots or more, and then draw the pattern again to verify it.
Set a backup unlock PIN to unlock the screen when you forget the pattern.
34
Basics
Setting a PIN
→
→
→
On the Applications screen, tap Settings Lock screen Screen lock PIN
.
Enter at least four numbers, and then enter the password again to verify it.
Setting a password
→
→
→
On the Applications screen, tap Settings Lock screen Screen lock Password
.
Enter at least four characters including numbers and symbols, and then enter the password
again to verify it.
Unlocking the device
Turn on the screen by pressing the Power button or the Home button, and enter the unlock
code.
If the unlock code is forgotten, take the device to a Samsung Service Centre to reset it.
Upgrading the device
The device can be upgraded to the latest software.
This feature may not be available depending on the region or service provider.
35
Basics
Upgrading with Samsung Kies
Launch Samsung Kies and connect the device to the computer. Samsung Kies automatically
recognises the device and shows available updates in a dialogue box, if any. Click the Update
button in the dialogue box to start upgrading. Refer to the Samsung Kies help for details on
how to upgrade.
•
Do not turn off the computer or disconnect the USB cable while the device is
upgrading.
•
While upgrading the device, do not connect other media devices to the computer.
Doing so may interfere with the update process.
Upgrading over the air
The device can be directly upgraded to the latest software by the firmware over-the-air
(FOTA) service.
→
→
→
On the Applications screen, tap Settings About device Software update Update
.
36
Communication
Phone
Use this application to make or answer a call.
Tap Phone on the Applications screen.
Making calls
Making a call
Use one of the following methods:
•
•
•
•
Keypad: Enter the number using the keypad, and then tap
.
Logs: Make a call from the history of incoming and outgoing calls and messages.
Favourites: Make a call from the list of favourite contacts.
Contacts: Make a call from the contacts list.
Speed dial numbers
For speed dial numbers, tap and hold the corresponding digit.
Number prediction
When entering numbers on the keypad, automatic predictions appear. Select one of these to
make a call.
37
Communication
Finding contacts
Enter a name, phone number, or email address to find a contact in the contacts list. As
characters are entered, predicted contacts appear. Select one to place a call to it.
Making an international call
Tap and hold 0 until the + sign appears. Enter the country code, area code, and phone
number, and then tap
.
During a call
The following actions are available:
•
•
•
Add call: Dial a second call.
Keypad: Open the keypad.
Speaker: Activate the speakerphone. Keep the device away from your ears when using
the speakerphone.
•
•
•
•
Mute: Turn off the microphone so that the other party cannot hear you.
Headset: Switch to a Bluetooth headset if it is connected to the device.
Swap: Switch between two calls.
Merge: Make a multiparty call when connected to two calls. Repeat this to add more
parties. This feature is available only if the multiparty call service is active.
•
•
•
•
→
→
→
→
Contacts: Open the contacts list.
Message: Send a message.
Memo: Create a memo.
Transfer: Connect the first party to the second party. This disconnects you from
the conversation.
•
→
Manage conference call: Have a private conversation with one party during a
multiparty call or disconnect one party form the multiparty call.
38
Communication
Adding contacts
To add a phone number to the contacts list from the keypad, enter the number and tap Add
to Contacts
.
Viewing call logs
Tap Logs to view the history of incoming and outgoing calls.
→
To filter a call log, tap
View by, and then select an option.
Fixed dialling number
The device can be set to restrict outgoing calls only to numbers with specified prefixes. Those
prefixes are stored in the SIM or USIM card.
→
→
→
→
Tap
Call settings Additional settings Fixed Dialling Numbers Enable FDN,
and then enter the PIN2 supplied with the SIM or USIM card. Tap FDN list and add numbers.
Call barring
The device can be set to prevent certain calls from being made. For example, international
calling can be disabled.
→
→
→
Tap
Call settings Additional settings Call barring, select a call barring option,
and then enter a password.
Receiving calls
Answering a call
When a call comes in, drag outside the large circle, or press the headset button.
If the call waiting service is active, another call can be made. When the second call is
answered, the first call is put on hold.
39
Communication
Rejecting a call
When a call comes in, drag outside the large circle, or press and hold the headset button.
To send a message when rejecting an incoming call, tap Reject call with message. To create
→
→
the rejection message, tap
Call settings Set reject messages.
Automatically rejecting calls from unwanted numbers
→
→
Tap
Call settings Call rejection, drag the Auto reject mode switch to the right, and
then tap Auto reject list. Tap Create, enter a number, assign a category, and then tap Save
.
Missed calls
If a call is missed,
missed calls.
appears on the status bar. Open the notifications panel to view the list of
Call waiting
Call waiting is a service provided by the service provider. A user can use this service to
suspend a current call and switch to an incoming call.
→
→
→
To make use of this service, tap
Call settings Additional settings Call waiting.
Call forwarding
The device can be set to send incoming calls to a specified number.
→
→
Tap
Call settings Call forwarding, and then select a condition. Enter a number and
tap Enable
.
Ending a call
Tap End call to end a call. Or press the headset button.
40
Communication
Contacts
Use this application to manage contacts, including phone numbers, email addresses, and
others.
Tap Contacts on the Applications screen.
Managing contacts
Creating a contact
Tap and enter contact information.
•
•
: Add an image.
: Add or delete a contact field.
/
Editing a contact
Select a contact to edit, and then tap
.
Deleting a contact
→
Tap
Delete.
Setting a speed dial number
→
Tap
Speed dial setting, select a speed dial number, and then select a contact for it. To
remove a speed dial number, tap and hold it, and then tap Remove
.
Searching for contacts
Use one of the following search methods:
•
•
Scroll up or down the contacts list.
Use the index at the right side of the contacts list for quick scrolling, by dragging a finger
along it.
•
Tap the search field at the top of the contacts list and enter search criteria.
41
Communication
Once a contact is selected, take one of the following actions:
•
•
•
•
: Add to favourite contacts.
: Make a voice call.
: Compose a message.
: Compose an email.
Moving contacts
Moving contacts to Google
→
Tap
Merge with Google.
Contacts moved to Google Contacts appear with in the contacts list.
Moving contacts to Samsung
→
Tap
Merge with Samsung.
Contacts moved to Samsung Contacts appear with in the contacts list.
Importing and exporting contacts
Importing contacts
→
→
Tap
Import/Export Import from USB storage, Import from SD card, or Import
from SIM card
.
Exporting contacts
→
→
Tap
Import/Export Export to USB storage, Export to SD card, or Export to SIM
card
.
Sharing contacts
→
→
Tap
Import/Export Share namecard via, select contacts, tap Done, and then select
a sharing method.
42
Communication
Favourite contacts
Tap , and then take one of the following actions:
•
•
•
•
Search: Search for contacts.
Add to Favourites: Add contacts to favourites.
Remove from favourites: Remove contacts from favourites.
Grid view List view: View contacts in grid or list form.
/
Contact groups
Adding contacts to a group
Select a group, and then tap . Select contacts to add, and then tap Done
.
Managing groups
Tap , and then take one of the following actions:
•
•
•
Create: Make a new group.
Search: Search for contacts.
Change order: Tap and hold next to the group name, drag it up or down to another
position, and then tap Done
.
•
Delete groups: Select user-added groups, and then tap Delete. Default groups cannot be
deleted.
Sending a message or email to a group’s members
→
Select a group, tap
Send message or Send email, select members, and then tap Done.
Business card
Create a business card and send it to others.
Tap Set up my profile, enter details, such as phone number, email address, and postal
address, and then tap Save. If user information has been saved when you set up the device,
select the business card in ME, and then tap to edit.
→
Tap
Share namecard via, and then select a sharing method.
43
Communication
Messaging
Use this application to send text messages (SMS) or multimedia messages (MMS).
Tap Messaging on the Applications screen.
You may incur additional charges for sending or receiving messages while you are
outside your home service area. For details, contact your service provider.
Sending messages
Tap , add recipients, enter a message, and then tap
.
Use the following methods to add recipients:
•
•
Enter a phone number.
Tap , select contacts, and then tap Done
.
Use the following methods to make a multimedia message:
•
•
Tap and attach images, videos, contacts, memos, events, and others.
→
Tap
Add subject to enter a subject.
Viewing incoming messages
Incoming messages are grouped into message threads by contact.
Select a contact to view the person’s message.
Listening to a voice message
Tap and hold 1 on the keypad, and then follow the instructions from your service provider.
44
Communication
Email
Use this application to send or view email messages.
Tap Email on the Applications screen.
Setting up email accounts
Set up an email account when opening Email for the first time.
Enter the email address and password. Tap Next for a private email account, such as Google
Mail, or tap Manual setup for a company email account. After that, follow on-screen
instructions to complete the setup.
→
→
To set up another email account, tap
Settings
.
Sending messages
Tap the email account to use, and then tap
subject, and message, and then tap
Tap to add a recipient from the contacts list.
at the top of the screen. Enter recipients,
.
→
Tap
Tap to attach images, videos, contacts, memos, events, and others.
Tap to insert images, events, contacts, location information, and others into the message.
Add Cc/Bcc to add more recipients.
Sending scheduled messages
→
While composing a message, tap
Schedule sending. Tick Schedule sending, set a
time and date, and then tap Done. The device will send the message at the specified time and
date.
•
•
If the device is turned off at the scheduled time, is not connected to the network,
or the network is unstable, the message will not be sent.
This feature is based on the time and date set on the device. The time and date
may be incorrect if you move across time zones and the network does not update
the information.
45
Communication
Reading messages
Select an email account to use, and new messages are retrieved. To manually retrieve new
messages, tap
.
Tap a message to read.
Reply to the message.
Forward the message.
Delete the message.
Add this email address to the
contacts list.
Mark the message as a reminder.
Open attachments.
Tap the attachment tab to open attachments, and then tap next to an attachment to save
it.
Google Mail
Use this application to quickly and directly access the Google Mail service.
Tap Google Mail on the Applications screen.
•
•
This application may not be available depending on the region or service provider.
This application may be labelled differently depending on the region or service
provider.
46
Communication
Sending messages
In any mailbox, tap , enter recipients, a subject, and a message, and then tap
.
→
→
→
→
→
Tap
Tap
Tap
Tap
Tap
Attach picture to attach images.
Attach video to attach videos.
Add Cc/Bcc to add more recipients.
Save draft to save the message for later delivery.
Discard to start over.
Reading messages
Mark the message as a reminder.
Reply to this message.
Add this email address to the
contacts list.
Reply to all recipients or forward
this message to others.
Preview attachment.
Keep this message for long-term
storage.
Mark the message as unread.
Add a label to this message.
Delete this message.
Labels
Google Mail does not use actual folders, but uses labels instead. When Google Mail is
launched, it displays messages labelled Inbox.
Tap to view messages in other labels.
To add a label to a message, select the message, tap , and then select the label to assign.
47
Communication
Talk
Use this application to chat with others via Google Talk.
Tap Talk on the Applications screen.
This application may not be available depending on the region or service provider.
Public profile
Tap the account ID at the top of the friends list to change the availability status, image, or
status message.
Adding friends
Tap , enter the email address of the friend to add, and then tap DONE
.
Chatting with friends
Select a friend from the friends list, enter a message in the field at the bottom of the screen,
and then tap
To add a friend to chat, tap
.
→
Add to chat
.
→
To end the chat, tap
End chat
.
Switching between chats
Scroll left or right.
Deleting chat history
→
Chats are automatically saved. To delete chat history, tap
Clear chat history.
48
Communication
Google+
Use this application to stay connected with people via Google’s social network service.
Tap Google+ on the Applications screen.
This application may not be available depending on the region or service provider.
Tap All circles to change the category, and then scroll up or down to view posts from your
circles.
Tap to use other social network features.
Messenger
Use this application to chat with others via Google+ instant messaging service.
Tap Messenger on the Applications screen.
This application may not be available depending on the region or service provider.
Select a friend from the friends list, enter a message in the field at the bottom of the screen,
and then tap
.
ChatON
Use this application to chat with any device. To use this application, you must sign in to your
Samsung account.
Tap ChatON on the Applications screen.
This application may not be available depending on the region or service provider.
Create a buddies list by entering phone numbers or Samsung account email addresses, or by
selecting buddies from the list of suggestions. Alternatively, tap Contact sync to manually
sync contacts from the device.
→
Tap Chats Start chat and select a buddy to start chatting.
49
Web & network
Internet
Use this application to browse the Internet.
Tap Internet on the Applications screen.
Viewing webpages
Tap the address field, enter the web address, and then tap Go
.
Tap
to share, save, or print the current webpage while viewing a webpage.
Opening a new page
→
Tap
New window.
To go to another webpage, tap , scroll left or right, and tap the page to select it.
Searching the web by voice
Tap the address field, tap , speak a keyword, and then select one of the suggested keywords
that appear.
This feature may not be available depending on the region or service provider.
50
Web & network
Bookmarks
→
To bookmark the current webpage, tap
Add bookmark.
To open a bookmarked webpage, tap , and then select one.
History
→
Tap
History to open a webpage from the list of recently-visited webpages. To clear the
→
history, tap
Clear history
.
→
→
Tap
History Most visited to open a webpage from the list of most visited webpages.
Saved pages
→
To view saved webpages, tap
Saved pages.
Links
Tap and hold a link on the webpage to open it in a new page, save, or copy.
→
To view saved links, tap
Downloads.
Sharing webpages
→
To share a webpage address with others, tap
Share page.
→
To share a part of a webpage, tap and hold the desired text, and then tap
Share
.
51
Web & network
Bluetooth
Bluetooth creates a direct wireless connection between two devices over short distances. Use
Bluetooth to exchange data or media files with other devices.
•
Samsung is not responsible for the loss, interception, or misuse of data sent or
received via the Bluetooth feature.
•
Always ensure that you share and receive data with devices that are trusted
and properly secured. If there are obstacles between the devices, the operating
distance may be reduced.
•
•
Some devices, especially those that are not tested or approved by the Bluetooth
SIG, may be incompatible with your device.
Do not use the Bluetooth feature for illegal purposes (for example, pirating copies
of files or illegally tapping communications for commercial purposes).
Samsung is not responsible for the repercussion of illegal use of the Bluetooth
feature.
→
To activate Bluetooth, on the Applications screen, tap Settings Bluetooth, and then drag
the Bluetooth switch to the right.
Pairing with other Bluetooth devices
→
→
On the Applications screen, tap Settings Bluetooth Scan, and detected devices are
listed. Select the device you want to pair with, and then accept the auto-generated passkey
on both devices to confirm.
Sending and receiving data
Many applications support data transfer via Bluetooth. An example is Gallery. Open Gallery
,
→
select an image, tap
Bluetooth, and then select one of the Bluetooth devices. After
that, accept the Bluetooth authorisation request on the other device to receive the image.
The transferred file is saved in the Bluetooth folder. If a contact is received, it is added to the
contacts list automatically.
52
Media
Music Player
Use this application to listen to music.
Tap Music Player on the Applications screen.
•
•
Some file formats are not supported depending on the device’s software version.
Some files may not play properly depending on the encoding used.
Playing music
Select a music category, and then select a song to play.
Scan DLNA-enabled devices.
Adjust the volume.
Change the repeat mode.
Turn on shuꢀe.
Open Music square.
Open the playlist.
Select a sound eꢁect.
Restart the currently-playing
song or skip to the previous
song. Tap and hold to move
backwards quickly.
Skip to the next song. Tap and
hold to move forwards quickly.
Pause and resume playback.
Setting a song as ringtone
→
→
To use the currently-playing song as ringtone, tap
Set as Phone ringtone.
53
Media
Creating playlists
Make an own selection of songs.
→
Tap Playlists, and then tap
Create playlist. Enter a title and tap OK. Tap Add music,
select songs to include, and then tap Done
.
→
To add the currently-playing song to a playlist, tap
Add to playlist.
Playing music by mood
Play music grouped by mood. The playlist is automatically created by the device. When a new
→
→
song is added, tap Music square
Library update.
Tap Music square and select a cell of mood. Or select multiple cells by dragging your finger.
Camera
Use this application to take photos or videos.
Use Gallery to view photos and videos taken with the device’s camera. (p. 60)
Tap Camera on the Applications screen.
The camera automatically shuts off when unused.
Camera etiquette
•
•
•
Do not take photos or videos of other people without their permission.
Do not take photos or videos where legally prohibited.
Do not take photos or videos in places where you may violate other people’s privacy.
54
Media
Taking photos
Taking a photo
Tap
to take the photo.
Change the shooting
mode.
Indicates which storage is
in use.
Switch between still and
video mode.
Select among various
eꢀects that are available.
Adjust the brightness.
Change the camera
settings.
Open the image viewer to
display photos.
Scene mode
Predefined settings make point-and-shoot photos easier to take.
→
Tap
Scene mode.
•
Landscape: Use this setting to take photos of blue skies and landscapes with richer
colours.
•
•
•
•
•
•
•
Party/Indoor: Use this setting for well-lit indoor scenes.
Sunset: Use this setting for richer colours and sharper contrasts.
Dawn: Use this setting for very subtle colours.
Autumn colour: Use this setting for red-shifted background scenery.
Candlelight: Use this setting for images of bright light against a dark background.
Backlight: Use this setting for subjects with bright lights behind them.
Night: Use this setting for images taken in darker conditions.
55
Media
Shooting mode
Several photo effects are available.
→
Tap
Shooting mode.
•
•
•
•
Single shot: Take a single photo.
Panorama: Take a photo composed of many photos strung together.
Share shot: Send a photo directly to another device via Wi-Fi Direct.
Smile shot: Take a photo when a subject smiles.
Panoramic photos
A panoramic photo is a wide landscape image consisting of multiple shots.
→
→
Tap
Shooting mode Panorama
.
Tap
and move the camera in any direction. When the blue frame aligns with the
viewfinder, the camera automatically takes another shot in a panoramic sequence. To stop
shooting, tap again.
Taking videos
Taking a video
Slide the still-video switch to the video icon, and then tap
to take a video. To stop
recording, tap
.
The zoom function may not be available when recording at the highest resolution.
56
Media
Recording mode
Indicates which storage is
in use.
Change recording mode.
Switch between still and
video mode.
Select among various
eꢀects that are available.
Adjust the brightness.
Change the camera
settings.
Open the video player to
play videos.
Tap
to change recording mode.
Normal: Use this mode for normal quality.
Limit for MMS: Use this mode to lower quality for sending via messaging.
•
•
Zooming in and out
57
Media
Use one of the following methods:
•
•
Use the Volume button to zoom in or out.
Spread two fingers apart on the screen to zoom in, and pinch to zoom out.
•
•
The zoom function may not be available when shooting at the highest resolution.
The zoom in/out effect is available when using the zoom feature while shooting
video.
Configuring settings for Camera
Tap to configure settings for Camera. Not all of the following options are available in both
still camera and video camera modes. The available options vary depending on the mode
used.
•
•
Edit shortcuts: Reorganise shortcuts to frequently-used options.
GPS tag: Attach a GPS location tag to the photo.
•
To improve GPS signals, avoid shooting in locations where the signal may be
obstructed, such as between buildings or in low-lying areas, or in poor weather
conditions.
•
Your location may appear on your photos when you upload them to the Internet.
To avoid this, deactivate the GPS tag setting.
•
•
•
•
•
Shooting mode: Change the shooting mode.
Recording mode: Change recording mode.
Effects: Select among various effects that are available.
Scene mode: Change the scene mode.
Brightness: Change the brightness.
58
Media
•
•
Timer: Use this for delayed-time shots.
Resolution: Select a resolution. Use higher resolution for higher quality. But it takes up
more memory.
•
•
White balance: Select an appropriate white balance, so images have a true-to-life colour
range. The settings are designed for specific lighting situations. These settings are similar
to the heat range for white-balance exposure in professional cameras.
Metering: Select a metering method. This determines how light values are calculated.
Centre-weighted measures background light in the centre of the scene. Spot measures
the light value at a specific location. Matrix averages the entire scene.
•
•
Guidelines: Display viewfinder guides to help composition when selecting subjects.
Image quality: Set the quality level for photos. Higher quality images require more
storage space.
•
•
•
Video quality: Set the quality level for videos.
Storage: Select the memory location for storage.
Reset: Reset the camera settings.
Shortcuts
Reorganise shortcuts for easy access to the camera’s various options.
→
Tap
Edit shortcuts.
Tap and hold an option and drag it to a slot at the left of the screen. The other icons can be
moved within the list by tapping and dragging them.
59
Media
Gallery
Use this application to view images and videos.
Tap Gallery on the Applications screen.
•
Some file formats are not supported depending on the software installed on the
device.
•
Some files may not play properly depending on how they are encoded.
Viewing images
Launching Gallery displays available folders. When another application, such as Email, saves
an image, the Download folder is automatically created to contain the image. Likewise,
capturing a screenshot automatically creates the Screenshots folder. Select a folder to open
it.
In a folder, images are displayed by creation date. Select an image to view it in full screen.
Scroll left or right to view the next or previous image.
Zooming in and out
Use one of the following methods to zoom in an image:
•
•
Double-tap anywhere to zoom in.
Spread two fingers apart on any place to zoom in. Pinch to zoom out, or double-tap to
return.
Playing videos
Video files show the icon on the preview. Select a video to watch it and tap
.
60
Media
Editing images
When viewing an image, tap
and use the following functions:
•
•
•
•
•
•
•
Delete: Delete the image.
Copy to clipboard: Copy to clipboard.
Rotate left: Rotate anticlockwise.
Rotate right: Rotate clockwise.
Crop: Resize the blue frame to crop and save the image in it.
Set as: Set the image as a wallpaper or a contact image.
Print: Print via a USB or Wi-Fi connection. The device is only compatible with some
Samsung printers.
•
•
Rename: Rename the file.
Details: View image details.
Deleting images
Use one of the following methods:
•
•
→
→
In a folder, tap
Select item, select images, and then tap
Delete.
→
When viewing an image, tap
Delete
.
Sharing images
Use one of the following methods:
•
•
→
In a folder, tap
Select item, select images, and then tap to send them to others.
When viewing an image, tap to send it to others or share it via social network services.
Setting as wallpaper
→
When viewing an image, tap
Set as to set the image as wallpaper or to assign it to a
contact.
61
Media
Video Player
Use this application to play video files.
Tap Video Player on the Applications screen.
•
•
Some file formats are not supported depending on the device's software.
Some files may not play properly depending on how they are encoded.
Playing videos
Select a video to play.
Scan DLNA-enabled
Adjust the volume.
devices.
Move forwards or
backwards by dragging the
bar.
Skip to the next video. Tap
and hold to move forwards
quickly.
Change screen ratio.
Restart the current video or
skip to the previous video.
Tap and hold to move
backwards quickly.
Pause and resume
playback.
Deleting videos
→
Tap
Delete, select videos by ticking, and then tap Delete.
Sharing videos
→
Tap
Share via, select videos by ticking, tap Done, and then select a sharing method.
62
Media
YouTube
Use this application to watch videos from the YouTube website.
Tap YouTube on the Applications screen.
This application may not be available depending on the region or service provider.
Watching videos
Tap , and then enter a keyword. Select one of the returned search results to watch a video.
Rotate the device to landscape orientation to display full screen.
Add the video to the
playlist.
Search for videos.
Pause or resume
playback.
Send the URL to others.
Move forwards or
backwards by dragging
the bar.
Rotate the screen to
portrait orientation.
Change display quality.
Sharing videos
Select the video to view, tap , and then select a sharing method.
Uploading videos
Select your account, tap , select a video, enter information for the video, and then tap
.
63
Media
FM Radio
Listen to music and news on the FM radio. To listen to the FM radio, you must connect a
headset, which serves as the radio antenna.
Tap FM Radio on the Applications screen.
Listening to the FM radio
Plug a headset into the device before launching the FM radio.
The FM radio scans and saves available stations automatically when running for the
first time.
Tap to turn on the FM radio. Select the radio station you want from the stations list and tap
to return to the FM radio screen.
Record a song from the FM radio.
Turn the FM radio on or oꢀ.
Adjust the volume.
Access services for the current
station.
Search for an available radio
station.
Add the current radio station to
the favourites list.
64
Media
Scanning radio stations
→
Tap
Scan, and then select a scan option. The FM radio scans and saves available
stations automatically.
Select the radio station you want from the stations list and tap
screen.
to return to the FM radio
Adding stations to the favourites list
Scroll to a radio station, and then tap to add the station to the favourites list.
65
Application & media stores
Play Store
Use this application to purchase and download applications and games that are able to run
on the device.
Tap Play Store on the Applications screen.
This application may not be available depending on the region or service provider.
Installing applications
Browse applications by category, or tap to search with a keyword.
Select an application to view information. To download it, tap Install. If there is a charge for
the application, tap the price, and follow on-screen instructions to complete the purchase
process.
•
When a new version is available for any installed application, an update icon
appears at the top of the screen to alert you to the update. Open the notifications
panel and tap the icon to update the application.
•
To install applications that you downloaded from other sources, on the
→
→
Applications screen, tap Settings Security Unknown sources
.
Uninstalling applications
Uninstall the applications purchased from Play Store
.
→
Tap
My Apps, select an application to delete in the list of installed applications, and
then tap Uninstall
.
66
Application & media stores
Samsung Apps
Use this application to purchase and download dedicated Samsung applications. For more
Tap Samsung Apps on the Applications screen.
This application may not be available depending on the region or service provider.
Installing applications
Browse applications by category. Tap to select a category.
To search for an application, tap at the top of the screen, and then enter a keyword in the
search field.
Select an application to view information. To download it, tap Get or Buy
.
When a new version is available for any installed application, an update icon appears
at the top of the screen to alert you to the update. Open the notifications panel and
tap the icon to update the application.
Game Hub
Use this application to access games.
Tap Game Hub on the Applications screen.
This application may not be available depending on the region or service provider.
Scroll left or right and select a game to download from Samsung Apps
.
67
Application & media stores
Play Music
Use this application to listen to music from the device or stream music from the Google cloud
service.
Tap Play Music on the Applications screen.
This application may not be available depending on the region or service provider.
Play music by selecting a music category or share songs with others by uploading them to
the Google cloud storage.
68
Utilities
Memo
Use this application to record important information to save and view at a later date.
Tap Memo on the Applications screen.
Composing memos
Tap , enter a memo, and then tap Save
.
→
To change the background colour, tap
.
→
To lock the memo so that others cannot view it, tap
.
Browsing memos
Browse memo thumbnails by scrolling up or down.
To edit the memo, tap
.
→
To search for a memo, tap
To delete memos, tap
Search
.
→
Delete
.
→
To send memos to others, tap
To sort memos by date or colour, tap
Send.
→
Sort by
.
→
To sync memos with an online service, tap
To set a PIN to lock or unlock a memo, tap
Sync memo
.
→
PIN lock
.
69
Utilities
Viewing a memo
Tap the memo thumbnail to open it. Scroll left or right to see more memos.
Tap and use the following:
•
•
•
•
: Delete the memo.
: Change the background colour.
: Lock the memo so that others cannot view it.
: Print the memo via a USB or Wi-Fi connection. The device is only compatible with
some Samsung printers.
S Planner
Use this application to manage events and tasks.
Tap S Planner on the Applications screen.
Creating events or tasks
Tap , and then use one of the following methods:
•
Quick add: Create an event or task from a memo. This feature is available only for English
and Korean.
•
•
Add event: Enter an event with an optional repeat setting.
Add task: Enter a task with an optional priority setting.
To add an event or task more briefly, tap a date to select it and tap it again.
70
Utilities
Enter a title and specify which calendar to use or sync with. Then tap Edit event details or
Edit task details to add more details, such as how often the event repeats, when it has an
advance alert, or where it takes place.
Attach a map showing the location of the event. Enter the location in the Location field, tap
next to the field, and then pinpoint the precise location by tapping and holding on the
map that appears.
Attach an image. Tap Images, and then take a photo or select one of the existing images.
Syncing with Google Calendar
→
On the Applications screen, tap Settings Google under Accounts, select the Google
account, and then tick Sync Calendar. To manually sync for updating, on the Applications
→
→
screen, tap S Planner
To display synced events or tasks, tap
account, and then tap Done
Sync.
→
→
Settings Calendars, select the Google
.
Changing calendar type
Tap the top left of the screen, and then select one from among different types of calendars
including month, week, and others. A pinch gesture can be used to change calendar type.
For example, pinch to change from the weekly calendar to the monthly calendar, and spread
apart to change monthly calendar back to weekly calendar.
Searching for events
→
Tap
Search, and then enter a keyword to search for.
To view today’s events, tap Today at the top of the screen.
Deleting events
→
Select a date or event, and then tap
Delete.
Sharing events
→
Select an event, tap
Share via, and then select a sharing method.
71
Utilities
Quickoffice
Use this application to view documents in various formats, including spreadsheets and
presentations.
Tap Quickoffice on the Applications screen.
Reading documents
→
→
Tap Browse or select a Quickoffice program Internal Storage or Recent Documents
a
document.
Searching documents
Tap Search and then enter search criteria.
Clock
Use this application to set alarms, check the time in any location in the world, measure the
duration of an event, set a timer, or use as the desk clock.
Tap Clock on the Applications screen.
Turn this alarm on or off.
72
Utilities
Alarm
Setting alarms
Tap Create alarm, set a time for the alarm to go off, select days for the alarm to repeat, and
then tap Save
.
•
Snooze: Set an interval and the number of times for the alarm to repeat after the preset
time.
•
Smart alarm: Set a time for the alarm to go off before the preset time.
Stopping alarms
Drag outside the large circle to stop an alarm. Drag
the alarm after a specified length of time.
outside the large circle to repeat
Deleting alarms
Tap and hold the alarm, and then tap Delete
.
World clock
Creating clocks
Tap Add city, and then enter a city name or select a city from the cities list.
To apply summer time, tap and hold a clock, and then tap DST settings
.
Deleting clocks
→
Tap
Delete, select clocks, and then tap Delete.
73
Utilities
Stopwatch
Tap Start to time an event. Tap Lap to record lap times.
Tap Reset to clear lap time records.
Timer
Set the duration, and then tap Start
.
Drag outside the large circle when the timer goes off.
Desk clock
Tap to view in full screen.
Calculator
Use this application for simple or complex calculations.
Tap Calculator on the Applications screen.
Rotate the device to landscape orientation and tap to display the scientific calculator. If
→
Screen rotation is disabled, tap
Scientific calculator
.
To see calculation history, tap
to hide the keypad.
→
To clear history, tap
Clear history.
→
To change the character size for history, tap
Text size
.
74
Utilities
Voice Recorder
Use this application to record or play voice memos.
Tap Voice Recorder on the Applications screen.
Recording voice memos
Tap to start recording. Speak into the microphone at the bottom of the device. Tap to
pause recording. Tap to finish recording.
Recording elapsed time
Start recording.
Display the list of voice memos.
Playing voice memos
Select a voice memo to play.
•
•
•
•
•
: Adjust the playback speed.
: Trim the voice memo.
: Adjust the volume by dragging the volume bar up or down.
: Stop playback.
: Pause playback.
→
To send a voice memo to others, tap
then select a sharing method.
Share via, select a voice memo, tap Done, and
75
Utilities
Managing voice memos
In the list of voice memos, tap
and select one of the following:
•
•
•
•
Share via: Select voice memos to send, and then select a sharing method.
Delete: Select voice memos to delete.
Settings: Change the voice recorder settings.
End: Close the voice recorder.
Google
Use this application to search not only the Internet, but also applications and their contents
on the device as well.
Tap Google on the Applications screen.
Searching the device
Tap the search field, and then enter a keyword. Alternatively, tap , speak a keyword, and
then select one of the suggested keywords that appear.
If no results are returned from the applications, the web browser appears, displaying the
search results.
Search scope
→
→
To select what applications to search, tap
Settings Phone search, and then tick the
items to search for.
Google Now
Launch Google search to view Google Now cards that show the current weather, public
transit info, your next appointment, and more when you are most likely to need it.
Join Google Now when opening Google search for the first time. To change Google Now
→
→
settings, tap
Settings Google Now.
This feature may not be available depending on the region or service provider.
76
Utilities
Voice Search
Use this application to search webpages by speaking.
Tap Voice Search on the Applications screen.
This application may not be available depending on the region or service provider.
Speak a keyword or phrase when Speak now appears on the screen. Select one of the
suggested keywords that appear.
My Files
Use this application to access all kinds of files stored in the device, including images, videos,
songs, and sound clips.
Tap My Files on the Applications screen.
Select a category, and then select a folder to open it. To go back to the parent folder, tap
To return to the root directory, tap
In a folder, tap , and then use one of the following options:
.
.
•
•
•
•
•
•
Select all: Select all files to apply the same option to them at once.
Create folder: Create a folder.
Search: Search for files.
View by: Change the view mode.
Sort by: Sort files or folders.
Settings: Change the file manager settings.
77
Utilities
Downloads
Use this application to see what files are downloaded through the applications.
Tap Downloads on the Applications screen.
This application may not be available depending on the region or service provider.
To see the files downloaded from the Internet, tap Internet downloads, otherwise, tap Other
downloads to see the files downloaded from other applications, such as Email
.
Select a file to open it with an appropriate application.
78
Travel & local
Maps
Use this application to pinpoint the location of the device, search for places, or get directions.
Tap Maps on the Applications screen.
This application may not be available depending on the region or service provider.
Searching for locations
Tap , enter an address, and then tap . Select a location to view the detailed location
information. To search for nearby locations, tap
.
Once the location is found, tap and use one of the following functions:
•
•
•
•
•
•
Clear Map: Clear the map.
Make available offline: Save the map of a specified area to view it offline.
Directions: Get directions for the location.
Layers: Overlay multiple layers including satellite images, traffic information, and more.
Settings: Change the map settings.
Help: View information about using the map.
To view current location, tap
.
79
Travel & local
Getting directions for a destination
Tap
.
1
2
Tap , and then select a method to enter starting and ending locations:
•
•
•
•
My current location: Use current location for starting location.
Contacts: Select from the contacts list.
Point on map: Pinpoint by tapping on the map.
My Places: Select from the list of favourite places.
Select a travel method, such as driving, public transit, or walking, and then tap GET
3
4
DIRECTIONS
.
Select one of the routes that appear, and then tap MAP VIEW to view details.
Local
Use this application to search for nearby restaurants, banks, bus stops, and more.
Tap Local on the Applications screen.
This application may not be available depending on the region or service provider.
Select a place category, and then select a place from the list of search results.
•
Map: Pinpoint the place on the map.
Directions: Search for a route to the place.
Call: Call the place’s phone number.
•
•
→
To add a place category, tap
Add a search on the category list, and then enter a
keyword to search into the text field.
80
Travel & local
Navigation
Use this application to search for a route to a destination.
Tap Navigation on the Applications screen.
•
Navigation maps, your current location, and other navigational data may differ
from actual location information. You should always pay attention to road
conditions, traffic, and any other factors that may affect your driving. Follow all
safety warnings and regulations while driving.
•
This application may not be available depending on the region or service provider.
Specify the destination by using one of the following methods:
•
•
•
•
Speak the destination address.
Enter the destination address.
Select the destination address from the contacts list.
Select the destination from the list of starred places.
Once a route is found, follow on-screen instructions to navigate to the destination.
81
Settings
About Settings
Use this application to configure the device, set application options, and add accounts.
Tap Settings on the Applications screen.
Wi-Fi
Activate the Wi-Fi feature to connect to a Wi-Fi network and access the Internet or other
network devices.
To use options, tap
.
•
•
•
Advanced: Customise Wi-Fi settings.
WPS push button: Connect to a secured Wi-Fi network with a WPS button.
WPS PIN entry: Connect to a secured Wi-Fi network with a WPS PIN.
Setting Wi-Fi sleep policy
→
→
→
On the Settings screen, tap Wi-Fi
Advanced Keep Wi-Fi on during sleep.
When the screen is turned off, the device automatically turns off Wi-Fi connections.
When this happens, the device automatically accesses data networks if it is set to use
them. This may incur data transfer fees. To avoid data-usage bills, set this option to
Always
.
82
Settings
Setting Network notification
The device can detect open Wi-Fi networks and display an icon on the status bar to notify
when available.
→
→
On the Settings screen, tap Wi-Fi
Advanced and tick Network notification to
activate this feature.
Wi-Fi Direct
Wi-Fi Direct connects two devices directly via a Wi-Fi network without requiring an access
point.
→
On the Settings screen, tap Wi-Fi Wi-Fi Direct
.
Bluetooth
Activate the Bluetooth feature to exchange information over short distances.
Data usage
Keep track of your data usage amount, and customise the settings for the limitation.
•
•
•
Mobile data: Set the device to use data connections on any mobile network.
Set mobile data limit: Set a limit for the mobile data usage.
Data usage cycle: Enter monthly reset date to monitor your data usage.
To use more options, tap
.
•
•
Data roaming: Set the device to use data connections when you are roaming.
Restrict background data: Set the device to disable sync in the background while using
a mobile network.
•
Auto sync data: Set the device to sync contact, calendar, email, bookmark, and social
network image data automatically.
•
•
Show Wi-Fi usage: Set the device to show your data usage via Wi-Fi.
Mobile hotspots: Search for and use another device’s mobile network.
83
Settings
More settings
Customise settings to control connections with other devices or networks.
Flight mode
This disables all wireless functions on your device. You can use only non-network services.
Mobile networks
•
Mobile data: Use to allow packet switching data networks for network services.
•
Data roaming: Use the device to connect to another network when you are roaming or
your home network is not available.
•
•
•
Access Point Names: Set up access point names (APNs).
Network mode: Select a network type.
Network operators: Search for available networks and select a network for roaming.
Tethering and portable hotspot
•
Portable Wi-Fi hotspot: Use the portable Wi-Fi hotspot to share the device’s mobile
network connection with computers or other devices through the Wi-Fi network.
•
USB tethering: Use USB tethering to share the device’s mobile network connection with
a computer via USB. When connected to a computer, the device is used as a wireless
modem for the computer.
•
•
Bluetooth tethering: Use the Bluetooth tethering to share the device’s mobile network
connection with computers via Bluetooth.
Help: Learn more about USB, Wi-Fi, and Bluetooth tethering.
VPN
Set up and connect to virtual private networks (VPNs).
Home screen mode
Select a Home screen mode (basic or easy).
84
Settings
Blocking mode
Select which notifications will be blocked or set to allow notifications for calls from specified
contacts in blocking mode.
Sound
Change settings for various sounds on the device.
•
Volume: Adjust the volume level for call ringtones, music and videos, system sounds, and
notifications.
•
•
•
Device ringtone: Select a ringtone to alert you to incoming calls.
Device vibration: Select a vibration pattern.
Default notifications: Select a ringtone for events, such as incoming messages and
alarms.
•
•
•
Vibrate when ringing: Set the device to vibrate and play a ringtone for incoming calls.
Dialling keypad tone: Set the device to sound when tapping the buttons on the keypad.
Touch sounds: Set the device to sound when selecting an application or option on the
touch screen.
•
Screen lock sound: Set the device to sound when locking or unlocking the touch screen.
Display
Change the settings for the display.
•
Wallpaper
:
–
–
–
Home screen: Select a background image for the Home screen.
Lock screen: Select a background image for the locked screen.
Home and lock screens: Select a background image for the Home screen and the
locked screen.
•
•
•
Brightness: Set the brightness of the display.
Auto-rotate screen: Set the content to rotate automatically when the device is turned.
Screen timeout: Set the length of time the device waits before turning off the display’s
backlight.
85
Settings
•
•
•
Font style: Change the font type for display text.
Font size: Change the font size.
Increase legibility: Sharpen the text to make it easier to read.
Storage
View memory information for your device and memory card, or format a memory card.
Formatting a memory card permanently deletes all data from it.
The actual available capacity of the internal memory is less than the specified
capacity because the operating system and default applications occupy part of the
memory.
Battery
View the amount of battery power consumed by your device.
Application manager
View and manage the applications on your device.
Location services
Change settings for location information permissions.
•
Use wireless networks: Set the device to use Wi-Fi and/or mobile networks for finding
the current location.
•
•
Use GPS satellites: Set the device to use the GPS satellite for finding the current location.
Location and Google search: Set the device to use your current location for Google
search and other Google services.
86
Settings
Lock screen
Change settings for the locked screen.
•
•
Screen lock: Activate the screen lock feature.
Lock screen options: Change the settings for the locked screen. These settings are
applied only when you set the swipe lock option.
–
Shortcuts: Set the device to show and edit application shortcuts on the locked screen.
This feature may not be available depending on the region or service provider.
–
–
–
Clock: Set the device to show the clock on the locked screen.
Dual clock: Set the device to show the dual clock on the locked screen.
Help text: Set the device to show the help text on the locked screen.
•
Owner information: Enter your information that is shown on the locked screen.
Security
Change settings for securing the device and the SIM or USIM card.
•
Encrypt device: Set a password to encrypt data saved on the device. You must enter the
password each time you turn on the device.
Charge the battery before enabling this setting because it may take more than an
hour to encrypt your data.
•
Encrypt external SD card
:
–
–
–
Encrypt: Set the device to encrypt files when you save them to a memory card.
Full encryption: Set the device to encrypt all files on a memory card.
Exclude multimedia files: Set the device to encrypt all files on a memory card, except
for media files.
If you reset your device to the factory defaults with this setting enabled, the device
will not be able to read your encrypted files. Disable this setting before resetting the
device.
87
Settings
•
Remote controls: Set the device to allow control of your lost or stolen device remotely
via the Internet. To use this feature, you must sign in to your Samsung account.
–
–
Account registration: Add or view your Samsung account.
Use wireless networks: Set the device to allow location data collection and to
determine the location of your lost or stolen device via Wi-Fi or mobile network.
•
•
SIM Change Alert: Activate or deactivate the Find my mobile feature which helps locate
the device when lost or stolen.
Find my mobile web page: Access the Find my mobile website
Find my mobile website.
•
Set up SIM card lock
:
–
–
Lock SIM card: Activate or deactivate the PIN lock feature to require the PIN before
using the device.
Change SIM PIN: Change the PIN used to access SIM or USIM data.
•
•
Make passwords visible: Set the device to display passwords as they are entered.
Device administrators: View device administrators installed on the device. You can allow
device administrators to apply new policies to the device.
•
•
Unknown sources: Choose to install applications from any source. If not chosen,
download applications only from Play Store
.
Trusted credentials: Use certificates and credentials to ensure secure use of various
applications.
•
•
Install from device storage: Install encrypted certificates stored on the USB storage.
Clear credentials: Erase the credential contents from the device and reset the password.
88
Settings
Language and input
Change the settings for text input.
Language
Select a display language for all menus and applications.
Default
Select a default keyboard type for text input.
Google voice typing
To change the voice input settings, tap
.
•
•
Choose input languages: Select input languages for text input.
Block offensive words: Set the device to prevent the device from recognising offensive
words in voice inputs.
Samsung keyboard
To change the Samsung keyboard settings, tap
.
The available options may vary depending on the region or service provider.
•
•
•
Portrait keyboard types: Change the keyboard layout.
Input languages: Select languages for text input.
Predictive text: Activate predictive text mode to predict words based on your input and
show word suggestions. You can also customise the word prediction settings.
•
•
Continuous input: Set the device to enter text by sweeping on the keyboard.
Keyboard swipe: Enable or disable the keyboard sweeping feature for the text input
mode. Switch between input modes by scrolling left or right on the keyboard.
This feature may not be available depending on the region or service provider.
89
Settings
•
Advanced
:
–
Auto capitalisation: Set the device to automatically capitalise the first character after
a final punctuation mark, such as a full stop, question mark, or exclamation mark.
–
–
Auto spacing: Set the device to automatically insert a space between words.
Auto-punctuate: Set the device to insert a full stop when you double-tap the space
bar.
–
–
Character preview: Set the device to display a large image of each character tapped.
Key-tap sound: Set the device to sound when a key is touched.
•
•
Tutorial: Learn how to enter text with the Samsung keyboard.
Reset settings: Reset Samsung keyboard settings.
Voice search
•
Language: Select a language for the voice recognition.
•
Speech output: Set the device to provide voice feedback to alert you to the current
action.
•
•
Block offensive words: Hide offensive words from voice search results.
Bluetooth headset: Set the device to allow a voice search with a Bluetooth headset,
when it is connected to the device.
Text-to-speech output
•
Preferred TTS engine: Select a speech synthesis engine. To change the settings for
speech synthesis engines, tap
.
•
•
•
Speech rate: Select a speed for the text-to-speech feature.
Listen to an example: Listen to the spoken text for an example.
Driving mode: Activate driving mode to set the device to read contents aloud and
specify applications to use in driving mode.
Pointer speed
Adjust the pointer speed for the mouse or trackpad connected to your device.
90
Settings
Cloud
Change settings for syncing data or files with your Samsung account.
Backup and reset
Change the settings for managing settings and data.
•
Back up my data: Set the device to back up settings and application data to the Google
server.
•
•
Backup account: Set up or edit your Google backup account.
Automatic restore: Set the device to restore settings and application data when the
applications are reinstalled on the device.
•
Factory data reset: Reset settings to the factory default values and delete all data.
Add account
Add email or SNS accounts.
Motion
Activate the motion recognition feature and change the settings that control motion
recognition on your device.
•
•
Shake to update: Set the device to search for Bluetooth devices by shaking it.
Turn over to mute/pause: Set the device to mute incoming calls, alarms, music, and the
FM radio by placing the device face down.
•
Learn about motions: View the tutorial for controlling motions.
91
Settings
Date and time
Access and alter the following settings to control how the device displays the time and date.
If the battery remains fully discharged or removed from the device, the time and date
is reset.
•
Automatic date and time: Automatically update the time and date when moving across
time zones.
•
•
•
Set date: Set the current date manually.
Set time: Set the current time manually.
Automatic time zone: Set the device to receive time zone information from the network
when you move across time zones.
•
•
•
Select time zone: Set the home time zone.
Use 24-hour format: Display time in 24-hour format.
Select date format: Select a date format.
Accessibility
Accessibility services are special features for those with certain physical disabilities. Access
and alert the following settings to improve accessibility to the device.
•
•
Auto-rotate screen: Set the interface to rotate automatically when you rotate the device.
Screen timeout: Set the length of time the device waits before turning off the display’s
backlight.
•
•
Speak passwords: Set the device to read aloud passwords you enter with Talkback.
Answering/ending calls
:
–
–
The home key answers calls: Set the device to answer an incoming call when
pressing the Home button.
The power key ends calls: Set the device to end a call when pressing the Power
button.
92
Settings
•
Accessibility shortcut: Add a shortcut to Accessibility on the quick menu that appears
when you press and hold the Power button.
•
•
•
TalkBack: Activate Talkback, which provides voice feedback.
Font size: Change the font size.
Text-to-speech output
:
–
Preferred TTS engine: Select a speech synthesis engine. To change the settings for
speech synthesis engines, tap
.
–
–
–
Speech rate: Select a speed for the text-to-speech feature.
Listen to an example: Listen to the spoken text for an example.
Driving mode: Activate driving mode to set the device to read contents aloud and
specify applications to use in driving mode.
•
Enhance web accessibility: Set applications to install web scripts to make their web
content more accessible.
•
•
•
Mono audio: Enable mono sound when listening to audio with one earbud.
Turn off all sounds: Mute all device sounds.
Tap and hold delay: Set the recognition time for tapping and holding the screen.
Developer options
Change the settings for application development.
•
•
•
Desktop backup password: Set a password to secure your backup data.
Stay awake: Set the screen to remain on while you are charging the battery.
Protect SD card: Set the device to request a confirmation when reading data from a
memory card.
•
•
•
USB debugging: Activate USB debugging mode to connect your device to a computer
with a USB cable.
Allow mock locations: Allow mock locations and service information to be sent to a
Location Manager service for testing.
Select debug app: Select applications to debug and prevent errors when you pause
debugging.
93
Settings
•
Wait for debugger: Set the device to prevent the selected application from loading until
the debugger is ready.
•
•
Show touches: Set the device to show the pointer when you touch the screen.
Show pointer location: Set the device to show the coordinates and traces of the pointer
when you touch the screen.
•
•
Show layout boundaries: Set the device to show boundaries.
Show GPU view updates: Set the device to flash areas of the screen when they are
updated with the GPU.
•
•
•
•
•
•
Show screen updates: Set the device to flash areas of the screen when they are updated.
Window animation scale: Select a speed for opening and closing pop-up windows.
Transition animation scale: Select a speed for switching between screens.
Animator duration scale: Select how long pop-up windows will be shown.
Disable hardware overlays: Set the device to hide hardware overlays.
Force GPU rendering: Set the device to use 2D hardware acceleration to improve graphic
performance.
•
Strict mode: Set the device to flash the screen when applications perform long
operations.
•
•
•
•
Show CPU usage: Set the device to list all active processes.
Profile GPU rendering: Set the device to check the time of GPU rendering time.
Enable traces: Set the device to capture traces of application and system performance.
Do not keep activities: Set the device to end a running application when you launch a
new application.
•
•
Limit background processes: Set the device to limit the number of processes that can
run in the background.
Show all ANRs: Set the device to alert you to unresponsive applications that are running
in the background.
About device
Access device information and update device software.
94
Troubleshooting
When you turn on your device or while you are using the device, it
prompts you to enter one of the following codes:
•
Password: When the device lock feature is enabled, you must enter the password you set
for the device.
•
PIN: When using the device for the first time or when the PIN requirement is enabled, you
must enter the PIN supplied with the SIM or USIM card. You can disable this feature by
using the Lock SIM card menu.
•
•
PUK: Your SIM or USIM card is blocked, usually as a result of entering your PIN incorrectly
several times. You must enter the PUK supplied by your service provider.
PIN2: When you access a menu requiring the PIN2, you must enter the PIN2 supplied with
the SIM or USIM card. For details, contact your service provider.
Your device displays network or service error messages
•
When you are in areas with weak signals or poor reception, you may lose reception. Move
to another area and try again.
•
You cannot access some options without a subscription. Contact your service provider for
more details.
The touch screen responds slowly or improperly
If your device has a touch screen and the touch screen is not responding properly, try the
following:
•
Remove any protective covers from the touch screen. Protective covers may prevent the
device from recognising your inputs and are not recommended for touch screen devices.
•
•
•
•
Ensure that your hands are clean and dry when tapping the touch screen.
Restart your device to clear any temporary software bugs.
Ensure that your device software is upgraded to the latest version.
If the touch screen is scratched or damaged, take it to your local Samsung Service Centre.
95
Troubleshooting
Your device freezes or has fatal errors
If your device freezes or hangs, you may need to close programs or reset the device to regain
functionality. If your device is frozen and unresponsive, press and hold the Power button for
8-10 seconds. The device reboots automatically.
If this does not solve the problem, perform a factory data reset. On the Applications
→
→
→
→
screen, tap Settings Backup and reset Factory data reset Reset device Erase
everything
.
Calls are being dropped
When you are in areas with weak signals or poor reception, you may lose your connection to
the network. Move to another area and try again.
Outgoing calls are not connected
•
•
•
Ensure that you have pressed the Dial key.
Ensure that you have accessed the right cellular network.
Ensure that you have not set call barring for the phone number you are dialling.
Incoming calls are not connected
•
•
•
Ensure that your device is turned on.
Ensure that you have accessed the right cellular network.
Ensure that you have not set call barring for the incoming phone number.
Others cannot hear you speaking on a call
•
•
•
Ensure that you are not covering the built-in microphone.
Ensure that the microphone is close to your mouth.
If using a headset, ensure that it is properly connected.
96
Troubleshooting
Audio quality is poor
•
•
Ensure that you are not blocking the device’s internal antenna.
When you are in areas with weak signals or poor reception, you may lose reception. Move
to another area and try again.
When dialling from contacts, the call is not connected
•
•
•
Ensure that the correct number is stored in the contact list.
Re-enter and save the number, if necessary.
Ensure that you have not set call barring for the contact’s phone number.
The device beeps and the battery icon is empty
Your battery is low. Recharge or replace the battery to continue using the device.
The battery does not charge properly or the device turns off
•
The battery terminals may be dirty. Wipe both gold-coloured contacts with a clean, soft
cloth and try charging the battery again.
•
If the battery no longer charges completely, dispose of the old battery properly
and replace it with a new battery (refer to your local ordinances for proper disposal
instructions).
Your device is hot to the touch
When you use applications that require more power or use applications on your device for an
extended period of time, your device may feel hot to the touch. This is normal and should not
affect your device’s lifespan or performance.
97
Troubleshooting
Error messages appear when launching the camera
Your Samsung device must have sufficient available memory and battery power to operate
the camera application. If you receive error messages when launching the camera, try the
following:
•
•
•
Charge the battery or replace it with a battery that is fully charged.
Free some memory by transferring files to a computer or deleting files from your device.
Restart the device. If you are still having trouble with the camera application after trying
these tips, contact a Samsung Service Centre.
Error messages appear when launching the FM radio
The FM radio application on your Samsung device uses the headset cable as an antenna.
Without a headset connected, the FM radio cannot receive radio stations. To use the FM radio,
first ensure that the headset is properly connected. Next, scan for and save the available radio
stations.
If you still cannot use the FM radio after performing these steps, try accessing your desired
station with another radio receiver. If you can hear the station with another receiver, your
device may require service. Contact a Samsung Service Centre.
Error messages appear when opening music files
Some music files may not play on your Samsung device for a variety of reasons. If you receive
error messages when opening music files on your device, try the following:
•
•
Free some memory by transferring files to a computer or deleting files from your device.
Ensure that the music file is not Digital Rights Management (DRM)-protected. If the file is
DRM-protected, ensure that you have the appropriate licence or key to play the file.
•
Ensure that your device supports the file type.
98
Troubleshooting
Another Bluetooth device is not located
•
•
Ensure that the Bluetooth wireless feature is activated on your device.
Ensure that the Bluetooth wireless feature is activated on the device you wish to connect
to, if necessary.
•
Ensure that your device and the other Bluetooth device are within the maximum
Bluetooth range (10 m).
If the tips above do not solve the problem, contact a Samsung Service Centre.
A connection is not established when you connect the device to a
computer
•
•
•
Ensure that the USB cable you are using is compatible with your device.
Ensure that you have the proper drivers installed and updated on your computer.
If you are a Windows XP user, ensure that you have Windows XP Service Pack 3 or higher
installed on your computer.
•
Ensure that you have Samsung Kies 2.0 or Windows Media Player 10 or higher installed
on your computer.
A small gap appears around the outside of the device case
•
This gap is a necessary manufacturing feature and some minor rocking or vibration of
parts may occur.
•
Over time, friction between parts may cause this gap to expand slightly.
99
Some content may differ from your device depending on the region, service provider, or
software version, and is subject to change without prior notice.
English (EU). 05/2013. Rev. 1.0
|
