Meridian Digital
Telephones
M2006
M2008/M2008HF
M2616
User Guide
Enterprise Solutions Documentation
While you are away from your desk: Call Forward
38
Contents
Contents
Introducing your Meridian Digital Telephone
1
Meridian Digital Telephones ................................................................... 1
M2616 ................................................................................................. 1
M2008/M2008HF ................................................................................ 2
M2006 ................................................................................................. 3
Selecting a position for your Meridian Digital Telephone .......................... 4
Parts of your Meridian Digital Telephone ................................................. 5
Your telephone’s display
6
Idle screen format .................................................................................. 6
Calling party information ....................................................................... 6
Display options ..................................................................................... 6
Using Display Options ........................................................................... 7
Your telephone’s features
10
Initiating Calls ..................................................................................... 10
To call using the dial pad ..................................................................... 10
Answering Calls .................................................................................. 11
Placing a call on hold .......................................................................... 11
Call Transfer ....................................................................................... 12
On-hook dialing .................................................................................. 13
Predial ................................................................................................ 13
Last Number Redial ............................................................................. 14
Handsfree ........................................................................................... 14
Group Listening ................................................................................... 15
Making a call
16
Auto Dial ............................................................................................ 16
Ring Again ......................................................................................... 16
Speed Call .......................................................................................... 17
Speed Call on Private Lines .................................................................. 18
System Speed Call ............................................................................... 19
Call Page ............................................................................................ 19
Override ............................................................................................. 20
i
Contents
Override, Enhanced .............................................................................20
Stored Number ....................................................................................21
Buzz ...................................................................................................21
Forced Camp-on ..................................................................................22
Call Charge/Forced Charge .................................................................22
Hot Line ...............................................................................................24
Radio Paging .......................................................................................24
Voice Call ...........................................................................................26
Receiving a call
27
31
Call Waiting ........................................................................................27
Call Pickup (for Meridian 1) ..................................................................28
Call Pickup (for Meridian SL-100) .........................................................29
Timed Recall Reminder .........................................................................30
Automatic Answerback .........................................................................30
During a call
Call Transfer ........................................................................................31
Timed Reminder Recall .........................................................................31
Auto Dial Transfer ................................................................................32
Call Park .............................................................................................33
Attendant Recall ...................................................................................34
Meridian 1 Display/MSL-100 Inspect ....................................................34
Call Charge .........................................................................................35
On Hold on Loudspeaker ......................................................................35
Malicious Call Trace .............................................................................37
Centrex/Exchange Switchhook Flash .....................................................37
While you are away from your desk
38
Call Forward .......................................................................................38
Call Forward - Internal .........................................................................39
Remote Call Forward ............................................................................40
Call Forward Destination Deactivation ...................................................42
Electronic Lock .....................................................................................42
Intercom ..............................................................................................44
ii
Contents
To talk with more than one person
45
Conference ......................................................................................... 45
Selectable Conferee Display and Disconnect .......................................... 46
Group Call .......................................................................................... 47
Call Join ............................................................................................. 48
Privacy Release ................................................................................... 48
Working without interruption
49
51
Call Forward ....................................................................................... 49
Make Busy .......................................................................................... 50
Hospitality features
Automatic Wake-Up on Your Own Telephone ....................................... 51
Message Registration ........................................................................... 52
Maid Identification .............................................................................. 53
Room Status ........................................................................................ 54
Automatic Wake-Up for a Guest (Option 11C Compact) ........................ 56
Controlled Class Of Service (Option 11C Compact) ............................... 57
Options
58
59
60
61
61
Your Telephone’s Controls
Terms you should know
Special Prefix Code (SPRE)
Flexible Feature Codes (FFCs)
iii
Contents
iv
Introducing your Meridian Digital Telephone
Introducing your Meridian Digital Telephone
This guide introduces you to your new Meridian Digital Telephone. It provides you
with a description of the controls, and a description of the features that are
available to you.
Meridian Digital Telephones
There are three basic models of the Meridian Digital Telephone and the following
are features of each type:
M2616
Handsfree
On-Hook Dialing
Message Waiting Indicator
Wall Mount Capability
13 configurable Feature Keys
Volume Control Bar for:
•
•
•
•
•
Ringing Tone
Buzz Tone
Speaker
Handset/Headset
Handsfree
Support for the following set options:
•
•
2 x 24 Character Display
MCA data option to provide
integrated voice and data transmission
External Alerter Interface for high
ambient noise environments
Add-on 22 configurable Feature Key
Expansion Modules (2 maximum)
Analog Terminal Adapter (ATA) for
simultaneous use of a fax, modem or
other analog device through the ATA’s
RJ-11 connection.
•
•
•
1
Introducing your Meridian Digital Telephone
M2008/M2008HF
Handsfree (on the M2008HF only)
On-Hook Dialing
Message Waiting Indicator
Wall Mount Capability
8 configurable Feature Keys
(7 on the M2008HF)
Volume Control Bar for:
•
•
•
•
•
Ringing Tone
Buzz Tone
Speaker
Handset/Headset
Handsfree (M2008HF)
Support for the following set options:
•
•
2 x 24 Character Display
MCA data option to provide
integrated voice and data transmission
External Alerter Interface for high
ambient noise environments
Analog Terminal Adapter (ATA) for
simultaneous use of a fax, modem or
other analog device through the ATA’s
RJ-11 connection
•
•
2
Introducing your Meridian Digital Telephone
M2006
On-Hook Dialing
Message Waiting Indicator
Wall Mount Capability
6 configurable Feature Keys
Volume Control Bar for:
•
•
•
•
Ringing Tone
Buzz Tone
Speaker
Handset/Headset
Support for the following set options:
•
•
•
MCA data option to provide
integrated voice and data transmission
External Alerter Interface for high
ambient noise environments
Analog Terminal Adapter (ATA) for
simultaneous use of a fax, modem or
other analog device through the ATA’s
RJ-11 connection
3
Introducing your Meridian Digital Telephone
Selecting a position for your Meridian Digital Telephone
•
On Your Desk: Your Meridian Digital
Telephone can be placed on your desk
so that it is tilted upwards making it
easier to see the display.
Desk Position (Default)
•
On the wall: The wall mount lets you
attach your telephone on the wall by
rotating the base. All three Meridian
Digital Telephone models can be wall
mounted.
Wall Mount
•
Contact your System Administrator if
you wish to change the position of
your Meridian Digital Telephone.
4
Introducing your Meridian Digital Telephone
Parts of your Meridian Digital Telephone
Message Waiting Light
The Message Waiting light turns on to indicate that a message has been left for you.
LCD Indicator
A steady º means the feature or line is active. A flashing º means the line is on hold
or the feature is being programmed.
Meridian Display Option
The Meridian Display Option, with adjustable angle and contrast, shows you
features, instructions, and incoming call information. It attaches to the
M2008/M2008HF or M2616, and is standard on the M2216ACD.
Release key (Rls)
By pressing ®, you can disconnect an active call
You may also hang up the handset. ® is especially
useful for disconnecting handsfree calls.
Hold
By pressing ˙, you can put an active call
on hold. Return to the caller by pressing the
extension key beside the flashing º.
Microphone
A microphone is an integral part of the M2616 and M2008HF
telephone, allowing you to have a telephone conversation without using
the handset (Handsfree calling).
Volume Bar
Use ® to control the volume of the handset and the speaker. Raise
the volume by pressing the right side of the bar. Lower it by pressing the left side.
Feature keys
You access telephone features and telephone
lines with the feature keys. The keys are labeled for your convenience.
Main Extension key/Primary Directory Number (DN) key
By pressing the lower right-hand key (or lifting the handset), you can make a call on your primary
line. The telephone may also have other line keys (The M2006 has only one line key).
The preceding figure shows the location of the control buttons on your Meridian
Digital Telephone. Please refer to the section titled Your Telephone’s Controls,
located near the back of this guide, for information on the functions performed by
each of these buttons.
5
Your telephone’s display
Your telephone’s display
Idle screen format
The Meridian M2616 and M2008/M2008HF can be equipped with a 2 x 24
character display module. The idle display, as shown below, gives the current
date and time.
24 APR 7:45 P
When you go off hook, the time and date disappear and information about your
call is displayed.
Calling party information
When your phone rings, information about the incoming call is displayed. The
phone number and name of the person calling may appear in the display module
if this information is available.
Display options
An additional function of the display is using it to show information when
programming various functions. By pressing the Program Key, you can scroll
through different adjustable features on your telephone. Scroll by using the
Volume Control Bar.
You may select the following adjustable features:
00 VOLUME ADJUSTMENT
01 PREDIAL RECALL
04 IDLE SCREEN FORMAT
05 LANGUAGE SELECTION
07 DISPLAY DIAGNOSTICS
09 KEY CLICK
02 CONTRAST ADJUSTMENT
03 CALL TIMER ENABLE
Under each of the above possible adjustable features on your display, it will read
SELECT OR SCROLL <<< >>>. For instance, if you are displaying
03 CALL TIMER ENABLE, you may select this feature to program it by pushing
‚‹, or you may push the right side of the volume control bar once to scroll to
04 IDLE SCREEN FORMAT or push the left side of the volume control bar once to get
to 02 CONTRAST ADJUSTMENT.
Note: Additional adjustable features and screens will be displayed on telephones
equipped with the optional Meridian Communications Adapter.
6
Your telephone’s display
Using Display Options
Volume Adjustment
It is easy to adjust the volume on your
telephone by following these steps:
P
1. Press the Program Key.
2. Press ‚ then ‚. Follow by pressing
⁄ to adjust the ringing tone. Pressing
¤ allows you to adjust the buzzer
tone. Press ‹ to adjust the speaker
volume. Press › to adjust the
volume of the handset and press fi
“handsfree” (if it is configured.)
®
P
3. Press the Volume Control Bar on the
left to reduce the volume; press the
volume control bar on the right to
increase the volume.
4. Press the Program Key.
Predial recall
To display the last number predialed:
P
1. Press the Program Key.
2. Press ‚ then ⁄.
To dial the predialed number, press the
Program Key then Lift the handset or press
a DN Key to place the call.
Contrast Adjustment
You may need to adjust how light/dark the
text is in your display depending on the tilt
of your display and the lighting in the
environment where the phone is located.
Follow these steps to make adjustments:
P
1. Press the Program Key.
2. Press ‚ then ¤.
7
Your telephone’s display
®
3. Use the Volume Control Bar to
increase or decrease the contrast .
P
4. Press the Program Key.
Call Timer Enable
Sometimes it is interesting to see how long
we stay on the phone with certain
customers or fellow employees. Follow
these steps to enable the call timer.
P
®
P
1. Press the Program Key.
2. Press ‚ then ‹.
3. Press the Volume Control Bar to toggle
between CALL TIMER ON and CALL
TIMER OFF.
4. Press the Program Key when the
desired status is visible.
Idle Screen Format
Follow these steps to determine how your
idle screen will look:
P
1. Press the Program Key.
2. Press ‚ then ›. IDLE FORMAT is
displayed along with your current
selection.
®
P
3. Press the Volume Control Bar to scroll
though the various formats until you
find the one that you like best.
4. Press the Program Key.
8
Your telephone’s display
Language Selection
The information on your display can be
displayed in one of several languages.
Follow these steps to change your display
to a different language:
P
1. Press the Program Key.
2. Press ‚ then fi.
®
P
3. Use the Volume Control Bar to scroll to
a the desired language.
4. Press the Program Key.
Display Diagnostics
P
Select Display Diagnostics by following
these steps:
1. Press the Program Key.
2. Press ‚ then ‡.
®
P
3. Scroll through the various test screens
using the Volume Control Bar.
4. Press the Program Key to set
diagnostics mode.
Introducing your Meridian Telephone
Key Click
Follow these steps if you want to hear a
tone each time you press a dial pad key:
P
®
P
1. Press the Program Key.
2. Press ‚ then ·.
3. Press the Volume Control Bar to toggle
between KEY CLICK ON and KEY CLICK
OFF.
4. Press the Program Key when the
desired status is visible.
9
Your telephone’s features
Your telephone’s features
Your telephone system administrator assigns features to your programmable
feature keys. Whenever this guide describes a procedure that requires special
codes or passwords, ask your telephone system administrator to provide these to
you.
To use a feature, you will be instructed to press a feature key, or enter an FFC
code. You may be provided with Flexible Feature Codes (FFCs), which you will
need in order to use some features. A table is located conveniently in the back of
this guide for you to note FFCs.
Not all features are available in your area, and some require additional
equipment.
Initiating Calls
There are several ways to initiate a call from your Meridian Digital Telephone
depending on the model:
∫ 2637
•
•
Via the DN Key
©
Via the Handsfree Mute Key
•
Via the Handset
Whenever you read “Lift the handset,” in
this guide, you may alternatively press a
DN Key, or Handsfree Mute Key (if so
equipped). Each of these actions will give
you dial tone.
To call using the dial pad
or
1. Lift the handset or press a DN Key.
∫ 2637
Press a DN Key if no free line is selected
automatically.
2. Dial the number.
10
Your telephone’s features
Answering Calls
When you receive an incoming call, your telephone rings and the LCD indicator
º flashes.
To answer a call, perform one of the
following
•
•
Lift the handset
©
∫ 2637
Press the Handset Mute Key (Main DN
only)
•
Press the DN Key beside the flashing
LCD indicator º.
Placing a call on hold
Use the Hold feature to place a call on hold. An example of where hold would be
useful would be to answer a call on a second line without disconnecting from your
original call.
To place a call on hold:
˙
Press Hold. The LCD indicator º flashes
beside the line on hold.
º
The LCD indicator flashes slowly.
The caller may hear music if this is
programmed on your system.
o retrieve a call on hold:
∫ 2637
Press the DN Key beside the flashing LCD
indicator º.
11
Your telephone’s features
Call Transfer
Use the Transfer feature to redirect a call to a third party.
To transfer a call to another number:
†
º
1. Press Transfer. The other party is on
hold and you hear dial tone. The LCD
indicator lights steadily.
2. Dial the DN that you want to transfer
the call to.
†
3. Press Transfer again, either when you
hear ringing, or after you talk privately
to the person you are transferring the
call to.
º
The LCD indicator goes from steady to off.
If the person you are calling is not
available:
∫ 2637
Press the DN Key beside the flashing LCD
indicator º. You will be reconnected with
the call.
º
º
The LCD indicator goes from flashing to
steady.
12
Your telephone’s features
On-hook dialing
On-hook dialing allows you to dial a number without lifting the handset.
To use On-hook dialing:
∫ 2637
1. Press a DN Key.
2. Upon hearing dial tone, Dial the
number.
3. Lift the handset when the called party
answers or, if using handsfree, begin
talking.
If the number you are calling is busy:
® or ¶
Press Release to release the line, or Ring
Again if desired.
Predial
Predial allows you to enter and preview a number, making corrections if required,
before dialing the number. Not recommended for use on telephones not equipped
with a display.
To use Predial:
1. Without lifting the handset or pressing
a DN Key, Dial the number.
2. Preview the number.
®
3. Use the Volume Control Bar to
backspace if you need to correct the
number.
∫ 2637
4. Press a free DN Key to dial the
number.
5. Lift the handset when the called party
answers, or if using handsfree, begin
talking.
13
Your telephone’s features
Last Number Redial
Last Number Redial allows you to automatically redial the last number you dialed.
To use Last Number Redial:
•
Lift the handset.
√or
∫ 2637
•
Press Last Number Key or your
Primary DN Key.
or
for Handsfree operation:
∫ 2637
∫ 2637
•
Press your Primary DN Key twice.
©
∫ 2637
•
Press the Handsfree Mute Key
followed by your Primary DN Key
To use Last Number Redial on an
MSL-100 system:
or
•
•
Lift the handset or press a DN Key.
∫ 2637
££
Press the Pound Sign Key twice.
Handsfree
If your telephone is an M2616 or an M2008HF, you can use the built-in
microphone and speaker instead of the handset. At any time during a call, you
can switch to the handset by picking it up.
To use Handsfree on a call:
©
Press the Handsfree Mute Key.
To discontinue a Handsfree call:
®
Press Release to end your call.
14
Your telephone’s features
To mute a handsfree call:
©
1. Press the Handsfree Mute Key. The
LCD indicator º flashes.
©
2. Press the Handsfree Mute Key again
to return to a two-way conversation.
To switch from the handset to
Handsfree:
©
1. Press the Handsfree Mute Key.
2. Replace the handset.
Group Listening
The group listening feature allows you to listen to a call through the speaker while
speaking through the handset, thus allowing a third party(ies) to listen to both
sides of the conversation. This feature is not available in all market regions or on
MSL-100 systems. Check with your system administrator for availability and
information on local laws governing the use of this feature.
To activate group listening:
∫Group Listen
While on a call, press the Group Listen
Key.
To turn group listening off:
∫Group Listen or
Press the Group Listen Key again or
Replace the handset.
15
Making a call: Auto Dial - Ring Again
Making a call
This chapter describes features that you can use when making a call.
Auto Dial
Auto Dial lets you dial a specific telephone number by pressing a feature key.
To store an Auto Dial number:
ç
ç
1. Without lifting the handset, press
Auto Dial. The associated LCD
Indicator flashes º.
2. Dial the number.
3. Press Auto Dial again.
To use Auto Dial:
1. Lift the handset or press a DN Key.
ç
2. Press Auto Dial. The stored number is
dialed automatically.
To display the Auto Dial number:
œor
∫Inspect
1. Press Display.
On an MSL-100 system, Press Inspect.
ç
2. Press Auto Dial. The number is
displayed.
Ring Again
If you receive a busy tone or the person does not answer when trying to reach
someone in your office, or in your private network, Ring Again automatically
redials that number and lets you know when that person is free, or that the person
has used his set.
To use Ring Again:
¶
1. You dial a DN and receive a busy tone
or no answer. Press Ring Again.
16
Making a call: Ring Again - Speed Call
2. Replace the handset or press Release.
When the number you want to reach is
free, or the person has re-used his set, you
hear the Ring Again signal.
3. Lift the handset or press a DN Key.
¶
4. Press Ring Again to automatically
redial the number.
To cancel Ring Again:
¶
Press Ring Again.
Speed Call
Speed Call allows you to dial frequently-called telephone numbers using a brief
code to represent the number. The codes are one, two, or three digits long (i.e.
000-999). See your telephone system administrator for a list of the Speed Call
codes.
Only a telephone that has been designated as a Speed Call Controller telephone
can program the numbers to be stored.
To store a Speed Call number:
•
1. Press Speed Call.
2. Dial the code to be added to the
Speed Call list.
3. Dial the access code (if required),
internal, external, or long-distance
telephone number.
•
4. Press Speed Call again.
To change a Speed Call number:
•
1. Press Speed Call.
2. Dial the Speed Call code that you
want to change.
17
Making a call: Speed Call - Speed Call on Private Lines
3. Dial the new access code (if required),
internal, external, or long-distance
telephone number.
•
4. Press Speed Call again.
To delete a Speed Call number:
•
1. Press Speed Call.
2. Dial the Speed Call code that you
want to delete.
•
3. Press Star.
•
4. Press Speed Call again.
To make a Speed Call:
1. Lift the handset or press a DN Key.
•
2. Press Speed Call.
3. Dial the Speed Call code.
Speed Call on Private Lines
Speed Call on Private Lines allows you to access a Private Line trunk and make a
speed call.
To use Speed Call on Private Lines:
∫Private Line
1. Press Private Line.
2. Lift the handset or press a DN Key.
3. Press Speed Call.
•
4. Dial the Speed Call code of the
number you want to dial.
18
Making a call: System Speed Call - Call Page
System Speed Call
System Speed Call lets you dial Speed Call codes and override all restrictions on
the telephone during the call. See Speed Call for more information on setting up
speed call codes.
To make a System Speed Call:
1. Lift the handset or press a DN Key.
–
2. Press Sys Speed Call.
3. Dial the Speed Call code of the
number you want to dial.
Call Page
Call Page allows you to make an announcement over your paging system by
dialing the page trunk access code.
Attendant consoles using the Page Key override telephones, which are then
disconnected and must re-access the paging trunk.
To use the Call Page feature:
1. Lift the handset or press a DN Key.
2. Dial the paging trunk access code.
You are connected to the paging system.
To disconnect:
or ®
Replace the handset or press Release.
19
Making a call: Override - Override, Enhanced
Override
You can override a busy signal and interrupt another call. This feature is called
Busy Override on the MSL-100.
To override a busy/engaged signal:
1. You dial a telephone number and hear
busy signal.
£
2. Press Override. The people on the call
in progress hear a tone for
approximately one second; the three
of you are then connected together. A
short tone repeats every 16 seconds.
Override, Enhanced
Enhanced Override allows you to override an ongoing call after you have
attempted a Forced Camp-on. Use Enhanced Override when making either a
simple call or a consultation call (i.e., place a call on hold and call another party).
To use Enhanced Override:
1. You dial a telephone number and hear
a busy signal.
£
£
2. Press Override to initiate a Forced
Camp-on. If either of the people on the
call disconnects at this time, you
receive a fast busy signal.
3. Press Override. The people on the call
in progress hear a tone for
approximately one second; the three
of you are then connected together. If
anyone disconnects, the other two
persons will remain connected.
20
Making a call: Stored Number - Buzz
Stored Number
The Stored Number feature allows you to store a single telephone number that
you can dial quickly. You can easily change the stored number.
To store a number when you're not
on a call:
º
1. Without lifting the handset, press
Stored No.
2. Dial the number.
º
3. Press Stored No again. Any number
previously stored is replaced.
To store a number when you're on a
call:
º
After you dial the number, press Stored
No.
To display the stored number:
œ
1. Press Display.
º
2. Press Stored No. The number is
displayed.
To call the stored number:
1. Lift the handset or press a DN Key .
º
2. Press Stored No.
Buzz
Two telephones may be linked, allowing one person to notify another person. The
person to whom your telephone is linked hears a “buzz”. Use this feature to
indicate a call, a visitor, or a request.
To buzz the person whose telephone
is linked to yours:
∂
Press Buzz The other telephone buzzes as
long as you hold down the key.
21
Making a call: Forced Camp-on - Call Charge/Forced Charge
Forced Camp-on
Forced Camp-on allows your telephone to automatically ring another telephone
as soon as it disconnects from its current call. Forced Camp-on allows both
internal and external calls to be camped on; Camp-on allows only external calls
to be camped on.
To use Forced Camp-on:
1. Dial a telephone number and hear a
busy signal.
£
2. Press Override to initiate a Forced
Camp-on. If either of the persons on
the call disconnect at this time, you will
hear a busy tone People on the call
will hear a tone and you will receive
ringback.
When the person you are trying to reach
ends the current call, their set will ring.
3. The person lifts the handset and the
call is connected.
Call Charge/Forced Charge
Call Charge allows you to charge a call to a specific account. Forced Charge
allows you to charge long distance calls from telephones that are restricted to
local calls.
To charge a local or long distance
call to an account before you dial:
1. Lift the handset or press a DN Key.
µ
2. Press Charge, or enter the Call Detail
Recording FFC, or enter the SPRE code
followed by fi.
3. Dial the charge account number.
4. Upon hearing dial tone, Dial your call.
22
Making a call: Call Charge/Forced Charge
To charge a call in progress:
† or ø
1. Press Transfer or Conference.
µ or
2. Press Charge, or enter the Call Detail
Recording FFC, or enter the SPRE code
followed by fi.
3. Dial the charge account number.
∫ 2637
4. Press the DN Key to return to your call.
To charge a call to an account when
you transfer a call:
†
1. Press Transfer. The call is on hold.
µ or
2. Press Charge, or enter the Call Detail
Recording FFC, or enter the SPRE code
followed by fi.
3. Dial the charge account number.
4. When you hear dial tone, Dial the
number you want the call transferred
to.
†
5. Press Transfer when you hear ringing,
or after you talk privately to the person
you are transferring the call to.
To charge a call to an account when
you add someone to a conference
call:
ø
1. Press Conference. The call is on hold.
µ or
2. Press Charge, or enter the Call Detail
Recording FFC, or enter the SPRE code
followed by fi.
3. Dial the charge account number.
23
Making a call: Hot Line - Radio Paging
4. Dial the party you want to add to the
conference.
ø
5. Press Conference.
Hot Line
The system administrator can program a Hot Line telephone number that is dialed
automatically.
To use Hot Line:
¥
Press Hot Line. The Hot Line number is
dialed automatically.
or
If your main DN is a Hot Line, Lift the
handset. The Hot Line number is dialed
automatically.
Radio Paging
Your Meridian 1 system may be equipped with an on-site Radio Paging system. If
you stay on the line, the paged person may answer the call by entering a special
Paging “Meet - me” code from any DN.
Note: This feature is not available in all areas or on all systems.
Radio Paging Access
Automatic Pre - selection
(“Meet - me” paging).
You wish to contact a person. They are
either busy on a call or you wish to page
someone without calling their DN. You
wish to directly alert their radio paging
device.
1. Lift the handset or press a DN Key.
2. Dial the Radio Paging FFC. You hear
paging dial tone.
3. Dial the DN of the party to be paged.
You hear ringback tone.
24
Making a call: Radio Paging
While ringback is heard, the person you
have paged may proceed to any DN and
enter a Radio Paging Answer code plus
their own DN to be connected directly to
you.
If your call is not answered within a preset
time period you will hear a continuous
high pitched tone for fifteen seconds, then
silence. Replace the handset or press
Release and try again later.
Automatic Post - selection
The called party is either busy on the
telephone or away from the desk.
To page the called party there is no need to
make a new call.
∫Radio Page
1. Press Radio Page. You hear special
dial tone.
2. Dial the Radio Paging Access FFC. You
hear ringback.
There is no need to redial the DN number
of the called party in order to page them.
While ringback is heard, the person you
have paged may proceed to any DN and
enter a Radio Paging Answer code plus
their own DN to be connected directly to
you.
If your call is not answered within a preset
time period you will hear a continuous
high pitched tone for fifteen seconds, then
silence. Replace the handset or press
Release and try again later.
Special Radio Paging Features
If you carry a Radio Pager, you will receive
a paging indication when another
telephone user accesses the Radio Paging
system and dials your DN.
If the Radio Paging system is set up to
function in “Meet - me” mode, you may
answer the paging call from any DN and
25
Making a call: Radio Paging - Voice Call
be connected to the person who has paged
you.
1. Lift the handset or press a DN Key on
any telephone on the system (as long
as it is not a hotline, private line, or a
manual line telephone). You hear dial
tone.
2. Dial the Radio Paging Answer FFC.
You hear paging tone.
3. Dial your own DN. You are connected
to the paging caller. If the paging
caller has hung up you will hear a
steady high pitched tone (Number
Unavailable tone).
Voice Call
You can page another person or make an announcement through another
telephone's speaker.
To make a voice call:
1. Lift the handset or press a DN Key.
“
2. Press Voice Call.
3. Make your announcement.
4. Replace the handset or press Release.
To respond to a voice call:
Your telephone rings once and you hear
the caller's voice through the speaker. Lift
the handset or press a DN Key and begin
speaking.
26
Receiving a call: Call Waiting
Receiving a call
This chapter describes features that you can use when receiving a call.
Call Waiting
If the attendant routes an outside call to you when you are already on a call, Call
Waiting lets you put your current call on hold, allowing you to answer the outside
call.
Note: If your system is equipped with the Autohold feature, use of the hold key is
not required.
To answer an incoming call during a
telephone call:
˙
1. Press Hold when you hear a tone and
the call waiting indicator flashes dur-
ing a telephone call.
∆
2. Press Call Wait to answer the
incoming call.
To return to your first telephone call:
˙ or ®
1. Press Hold if you want to put the
second call on hold, or Release to end
the second call.
∫ 2637
2. Press the DN Key associated with the
first call.
To answer an incoming call during a
telephone call without the Call
Waiting Key:
®
1. If you don't have a Call Wait Key and
you hear the Call Waiting tone, end
your current call and Replace the
handset or press Release.
∫ 2637
2. When the telephone rings, press the
DN Key beside the flashing LCD
indicator º to answer the incoming
call.
27
Receiving a call: Call Pickup (for Meridian 1)
Call Pickup (for Meridian 1)
Using Call Pickup, you can answer a ringing telephone from any telephone in
your Pickup Group or another Pickup Group.
To answer a ringing call in your own
Call Pickup group:
1. Lift the handset or press a DN Key.
ƒ or
2. Press Call Pickup, or enter your SPRE
code followed by ‹, or enter the
Call Pick Up FFC.
To answer a ringing call in another
Call Pickup group:
1. Lift the handset or press a DN Key.
‘ or
2. Press Group Pickup, or enter your
SPRE code followed by ·›, or
enter the Group Pick Up FFC.
3. Dial the pickup group number of the
ringing telephone.
To answer a ringing call at a specific
extension in any pickup group:
1. Lift the handset or press a DN Key.
ß or
2. Press DN Pickup, or enter your
SPRE code followed by ·fi, or
enter the DN Pick Up FFC.
3. Dial the DN of the ringing telephone.
28
Receiving a call: Call Pickup (for Meridian SL-100)
Call Pickup (for Meridian SL-100)
Using Call Pickup, you can answer a ringing telephone from any telephone in
your Pickup Group or another Pickup Group.
To answer a ringing call in your own
Call Pickup Group:
and
1. Lift the handset and press a DN Key.
∫ 2637
ƒ or
2. Press Call Pickup, or enter your Call
Pickup feature access code.
To answer a ringing call in another
Call Pickup Group:
and
1. Lift the handset and press a DN Key.
∫ 2637
ƒor
2. Press Call Pickup, or enter your Call
Pickup feature access code.
3. Dial the call pickup group number of
the ringing telephone.
To answer a ringing call at a specific
extension in any pickup group:
and
1. Lift the handset and press a DN Key.
∫ 2637
2. Enter your Directed Call Pickup
feature access code.
3. Dial the call pickup group number or
the DN of the ringing telephone.
29
Receiving a call: Timed Recall Reminder - Automatic Answerback
Timed Recall Reminder
Timed Reminder Recall rings your telephone after a period of time to remind you
of a transferred call that has not yet been answered.
To use the Timed Reminder Recall:
†
1. Press Transfer. The call is placed on
hold and you hear dial tone.
2. Dial the number to which you want to
transfer the call.
†
3. When you hear ringback tone, press
Transfer again.
If the transferred call is not answered, your
telephone rings.
To Answer a recall:
1. When your telephone rings, Lift the
handset or press a DN Key. You are
connected to the original caller.
†
2. Press Transfer to repeat the transfer, if
desired.
Automatic Answerback
When Automatic Answerback is activated, your set automatically answers in
Handsfree mode after one ring.
This feature is not supported on the M2006 and M2008/M2008HF.
To activate Automatic Answerback:
∫
Press Auto Ans. The LCD indicator º turns
on.
When Automatic Answerback is active,
calls are not routed to your voice message
service, if provided.
To deactivate Automatic
Answerback:
∫
Press Auto Ans again. The LCD Indicator
º turns off.
30
During a call: Call Transfer - Timed Reminder Recall
During a call
This chapter describes features that you can use during your call.
Call Transfer
Call Transfer allows you to transfer a call to another number.
To transfer a call while on a call:
†
1. Press Transfer. The call is placed on
hold and you hear dial tone.
2. Dial the number to which you want to
transfer the call.
†
3. Press Transfer again, either when you
hear ringback, or after you talk
privately to the person to whom you
are transferring the call.
If the person you are calling is not
available:
®
1. Press Release.
∫ 2637
2. Press the DN Key beside the flashing
LCD indicator º.
Timed Reminder Recall
Timed Reminder Recall rings your telephone after a period of time to remind you
of a transferred call that has not yet been answered. (Not available on MSL-100)
To use Timed Reminder Recall:
†
1. Press Transfer. The call is placed on
hold and you hear dial tone.
2. Dial the number to which you want to
transfer the call.
31
During a call: Timed Reminder Recall - Auto Dial Transfer
†
3. Press Transfer again or replace the
handset before the extension answers.
This starts the recall timer
Note: If the person to whom the call is
transferred answers, the recall timer stops.
If the transferred call is not
answered, your telephone rings:
1. Lift the handset or press a DN Key.
You are connected to the original
caller. The extension to which you
transferred the call will continue to
ring.
†
2. Press Transfer and repeat the transfer
(to a different DN), if desired.
If the person to whom you are transferring the call answers while you are on the
line, a conference call is set up between the three of you. Replace the handset or
press Release to complete the transfer. Check with your system administrator
about the length of your recall timer.
Auto Dial Transfer
Auto Dial Transfer allows you to use your Auto Dial Key to transmit digits to the
central office after a Trunk Switchhook Flash. You must be on a central
office/exchange (CO) trunk call from or to a CO which offers Centrex- or
exchange line-type features.
To use Auto Dial Transfer when you
pick up an incoming trunk call:
1. Press Trunk Switchhook Flash and
Trunk Switchook Flash
wait for interrupted dial tone.
ç
2. Press Auto Dial to call the number
desired.
3. Replace the handset or press Release
to end the call.
32
During a call: Call Park
Call Park
Call Park allows a call to be held temporarily, then to be retrieved from any other
DN. You can park an incoming call and then page the called party, without tying
up a line. Your office may have a System Park DN where most calls are
automatically parked.
If configured networkwide, Call Park can be used across networks.
To park a call on the System Park
Extension or your own DN:
¢
¢
Press Park twice. If there is a System Park
DN, the call is parked on it. Otherwise, it is
parked on your DN.
Note: for MSL-100 Press Park once and
the call is parked
To park a call on a DN other than the
System Park Extension or your own
DN:
¢
1. Press Park.
2. Dial the DN.
¢
3. Press Park again.
Note: MSL-100 uses Directed Call Park
(DCPK)
To park a call using the SPRE code
or FFC:
† or ø
1. Press Transfer or Conference.
2. Dial the SPRE code followed by
‡⁄, or enter the Call Park FFC.
3. If you don't want the System Park
Extension or your own DN, Dial a DN.
† or ø
4. Press Transfer or Conference again.
Note: MSL-100 uses Conference only.
33
During a call: Call Park - Attendant Recall - Display/Inspect
To retrieve a parked call:
1. Lift the handset or press a DN Key.
¢
2. Press Park, or enter the SPRE code
followed by ‡¤, or enter the
Call Park FFC.
3. Dial the DN where the call is parked.
If you park a call and it isn’t answered within a specified period of time, it rings
back to your telephone or to the attendant. Check with your system administrator
to determine your specified period of time.
Attendant Recall
The Attendant Recall feature allows you to contact an attendant during a call and
connect the call to the attendant.
To contact the attendant during a
call:
å
1. Press Attendant Recall during a call.
2. Stay on the line until the attendant
answers.
3. When you Replace the handset or
Press Release, the caller remains
connected to the attendant.
Meridian 1 Display/MSL-100 Inspect
When you are on an active call, you can identify a second incoming caller with
the Display (Meridian 1)/Inspect (MSL-100) feature. Meridian 1 systems may be
equipped with "Automatic Set Display". This feature automatically updates your
telephone’s display with the information on the incoming call.
To view the name or number of a
second caller while on a call in
progress:
1. While on a call, you hear the call
waiting tone.
œor
∫Inspect
2. Press Display.
On MSL-100, press Inspect.
34
During a call: Call Charge - On Hold on Loudspeaker
∫ 2637
3. Press the DN Key beside the flashing
LCD indicator º. Information about
the call is displayed in the Display
Module.
Displaying the second caller's name does not interfere with the current call in
progress. You can also press the Display Key followed by the Forward Key or an
Auto Dial Key to view the number stored on the key.
Call Charge
With the Call Charge feature, you can create a charge account record and/or
charge a call to an incoming number.
While on a call, to record the caller’s
number for accounting purposes:
∫Call Charge
1. Press Call Charge. You hear three
beeps followed by dial tone. The other
party is on hold.
2. Dial a charge account number or the
caller’s number.
∫Call Charge
3. Press Call Charge again to return to
the call.
On Hold on Loudspeaker
The On Hold on Loudspeaker feature allows users such as commodities brokers to
monitor one (with the optional Loudspeaker) or several (with the Speech Monitor)
stock markets, for example, while talking to one or more customers using the
handset. (A Speech Monitor works like a Loudspeaker, but can handle up to eight
channels.) At any time, the user can enter the call being monitored on the
Loudspeaker or Speech Monitor unit.
This feature requires additional equipment.
To use On Hold On Loudspeaker:
˙
∫Loudspeaker
∫ 2637
1. Place the call on Hold.
2. Press Loudspeaker.
3. Press the DN Key associated with the
call on hold. The call on hold is put on
the Loudspeaker and is heard publicly.
35
During a call: On Hold on Loudspeaker
To talk privately to the party on the
Loudspeaker:
Use the handset on the Loudspeaker (if
provided).
While the Loudspeaker is active, any other
call is maintained on the handset. More
than one call can be put on hold, but only
one call at a time can be placed on the
Loudspeaker.
To use On Hold On Loudspeaker on
the Speech Monitor:
∫Hot Line
1. Make a call from Hot DN or the DN of
the Speech Monitor.
˙
2. Place the call on Hold. The Speech
Monitor is automatically activated.
To talk privately to one of the parties
on the Speech Monitor
Take the call on the handset of the phone.
This conversation will not be heard on the
Loudspeaker. Any other user with a Speech
Monitor DN on their set can enter the call
by establishing a Multiple Appearance
Conference.
To disconnect a call from the Speech
Monitor:
Replace the handset or press Release
while the call is active.
To disconnect from the Speech
Monitor:
Switch off the Speech Monitor.
36
During a call: Malicious Call Trace - Centrex Switchhook Flash
Malicious Call Trace
Malicious Call Trace provides a way for you to trace nuisance calls within your
system.
While you are on a call:
≠
Press Trace.
If you do not have a trace button:
† or ø
1. Press Transfer or Conference.
2. Dial the Trace FFC, or SPRE code
followed by °‹.
∫ 2637
3. Press the DN Key beside the flashing
LCD indicator to return to the call.
Centrex/Exchange Switchhook Flash
Centrex/Exchange Switchhook Flash allows you to signal the Central
Office/Exchange (CO) during an established call to use a Centrex service such as
call transfer or three-way calling. Since CO features are designed into the
MSL-100 PBX, this feature is not applicable to the MSL-100.
To use Centrex/Exchange Line
Switchhook Flash:
1. Press Trunk Switchhook Flash. You
Trunk Switchook Flash
hear special dial tone.
2. Dial the codes for your custom Centrex
feature.
37
While you are away from your desk: Call Forward
While you are away from your desk
This chapter describes features that you may wish to use when you are away from
your desk.
Call Forward
Call Forward allows you to transfer all your calls so that they ring at another DN.
You cannot forward calls while your telephone is ringing.
To forward all your calls:
∑
1. Press Forward. The LCD indicator º
flashes.
2. Dial the DN that you want to forward
your calls to.
∑
3. Press Forward. The LCD indicator º
remains on.
To cancel Call Forward:
∑
Press Forward. The LCD indicator º turns
off.
To reinstate Call Forward to the same
number:
∑
∑
Press Forward twice. The LCD indicator º
turns on again.
To display the number to which you are currently forwarding your internal calls (on
telephones equipped with an appropriate display):
œor
∫Inspect
1. Press Display.
On the MSL-100, press Inspect.
∑
2. Press Forward. The number is
displayed.
You can forward calls to Meridian Mail by
using the Meridian Mail DN as your Call
Forward DN.
38
While you are away from your desk: Call Forward - Internal
Call Forward - Internal
Call Forward—Internal allows only calls originating at internal DNs to ring at
another DN. Calls originating outside your Meridian 1 system will still ring at your
telephone. You cannot forward calls while your telephone is ringing.
To forward your internal calls:
∫Int Forward
1. Press Internal Call Forward. The LCD
indicator º flashes.
2. Dial the DN that you want to forward
your calls to.
∫Int Forward
3. Press Internal Call Forward. The LCD
indicator º remains on.
Receiving a call:
To cancel Internal Call Forward:
∫Int Forward
Press Internal Call Forward. The LCD
indicator º turns off.
To reinstate Call Forward to the same
number:
∫Int Forward
∫Int Forward
Press Internal Call Forward twice. The LCD
indicator º turns on again.
To display the number to which you are currently forwarding your internal calls (on
telephones equipped with an appropriate display):
œor
∫Inspect
1. Press Display.
On MSL-100, press Inspect.
∫Int Forward
2. Press Internal Call Forward. The
number is displayed.
You can forward calls to Meridian Mail by
using the Meridian Mail DN as your Call
Forward DN.
39
While you are away from your desk: Remote Call Forward
Remote Call Forward
Remote Call Forward allows you (from any telephone other than your own) to
forward your calls to any telephone.
To activate Remote Call Forward:
1. Lift the handset or press a DN Key.
2. If you are calling from a telephone
outside the system, first Dial the Direct
Inward System Access (DISA) number
and wait for the dial tone.
3. Dial the Remote Call Forward
Activate FFC.
4. Dial your Electronic Lock password .
(See “Electronic Lock” on page 42.)
5. Dial your DN.
6. Dial the number of the telephone to
which you want your calls forwarded.
If the number you are forwarding calls
to is invalid, you will hear a fast busy
signal.
£
7. Press the Pound Sign Key.
If you want to forward calls to a previously
programmed telephone number, skip step
6, above.
To cancel Remote Call Forward:
1. Lift the handset or press a DN Key.
2. If you are calling from a telephone
outside the system, first Dial the Direct
Inward System Access (DISA) number
and wait for the dial tone.
40
While you are away from your desk: Remote Call Forward
3. Enter the Remote Call Forward
Deactivate FFC.
4. Dial your Electronic Lock password.
(See “Electronic Lock” on page 42.)
5. Dial your DN.
£
6. Press the Pound Sign Key.
To verify Remote Call Forward:
1. Lift the handset or press a DN Key.
2. If you are calling from a telephone
outside the system, first Dial the Direct
Inward System Access (DISA) number
and wait for the dial tone.
3. Enter the Remote Call Forward Verify
FFC.
4. Dial your Electronic Lock password.
(See “Electronic Lock” on page 42.)
5. Dial your DN.
6. Dial the DN of the telephone you are
forwarding to.
£
7. Press the Pound Sign Key.
41
Away from your desk: Call Forward Deactivation - Electronic Lock
Call Forward Destination Deactivation
Call Forward Destination Deactivation allows you to deactivate the Call Forward
All Calls feature on a telephone which has been forwarded to your telephone.
To lock your telephone:
1. Lift the handset or press a DN Key.
2. Dial the Call Forward Destination
Deactivation FFC.
3. Dial the DN of the telephone for which
you wish to deactivate Call Forward
All Calls.
£
4. Press the Pound Sign key.
You will receive confirmation tone
indicating that you were successful in
deactivating Call Forward at the other
telephone.
Electronic Lock
You can lock your telephone with a password so that no one can make external
calls from your office. This feature does not prohibit calls to internal extensions.
The lock consists of a password which you may change.
To lock your telephone:
1. Lift the handset or press a DN Key.
2. Dial the Lock FFC.
3. Dial your electronic lock password.
4. If you are using someone else’s
telephone, Dial your DN.
5. Replace the handset or press Release.
42
While you are away from your desk: Electronic Lock
To unlock your telephone:
1. Lift the handset or press a DN Key.
2. Dial the Unlock FFC.
3. Dial your electronic lock password.
4. If you are using someone else’s
telephone, Dial your DN.
5. Replace the handset or press Release.
To change your electronic lock
password:
1. Lift the handset or press a DN Key.
2. Dial the Electronic Lock Password
Change FFC.
3. Dial the current password for your
telephone.
4. Dial the new password you wish to
use.
5. Dial the new password again.
If you hear a fast busy signal you
may have misdialed:
Replace the handset or press Release and
try again.
You can only change your password from
your telephone. Password change is not
supported from a remote set.
43
While you are away from your desk: Intercom
Intercom
You can use the Intercom feature to call a member of your intercom group.
To make an Intercom call:
1. Lift the handset or press a DN Key.
Ω
2. Press Intercom.
3. Dial the one- or two-digit code for the
intercom group member you wish to
call.
To answer an intercom call when you are on a line other than your intercom group line:
˙ or ®
1. Press Hold to put the current call on
hold, or press Release to terminate the
call.
Ω
2. Press Intercom and begin speaking.
44
To talk with more than one person: Conference
To talk with more than one person
This chapter describes features which allow you to talk with more than one person
at the same time.
Conference
You can set up a conference call for up to three (or six) people, including yourself.
Contact your telephone system administrator to find out the maximum number of
persons you can join in a conference call on your system.
To set up a conference call:
ø
1. While on a call, press Conference. The
other party is on hold and you hear
dial tone.
2. Dial the next number to add to the
conference. When the call is
answered, you may talk privately with
the person before they join the
conference.
ø
3. Press Conference again to join all
callers.
If necessary, repeat the procedure to
include up to six people in the conference.
If the person you are adding to the
conference is not available:
®
1. Press Release.
∫ 2637
2. Press the DN Key with the flashing º .
45
To talk with more than one person: Conferee Display & Disconnect
Selectable Conferee Display and Disconnect
You can view the list of active conferees by using the Conferee Selectable Display
key and disconnect any party that has been added to the conference call. This
feature is not available on the MSL-100.
To view active conferees:
∫Conf Display
1. While on a conference call, press the
Conferee Selectable Display key. The
LCD indicator º turns on. With each
key press, the screen changes to show
a different active conferee.
Note: This action has no effect on
the displays of the other telephones
involved in the conference.
®
2. Press the Release key . If configured,
the Conference Count Display returns.
The LCD indicator º turns off.
To disconnect a conferee:
∫Conf Display
1. While on a conference call, press the
Conferee Selectable Display key. The
LCD indicator º turns on. Continue to
press the key until the conferee that is
to be disconnected is displayed on the
screen.
∫ 2637
2. Press the DN Key on which the
conference call is established. The
selected conferee is disconnected from
the call.
∫Conf Display
3. If there are additional conferees to be
disconnected, press the Conferee
Selectable Display key until the
conferee that is to be disconnected is
displayed on the screen.
®
4. Press the Release key . If configured,
the Conference Count Display returns
and is updated to reflect the revised
total count of conferees. The LCD
indicator º turns off.
46
To talk with more than one person: Group Call
Group Call
Group Call automatically calls members of a predefined group, one at a time,
until they have all answered. Ask your system administrator for details on creating
a conference call group.
To call group members:
1. Lift the handset or press a DN Key.
≈
2. Press Group Call or enter the Group
Call FFC. The group members are
called automatically. The LCD indicator
º beside the Group Call Key flashes
until all members have answered.
Their phone numbers appear on the
display as they answer. When the last
person answers, the Group Call indicator
lights steadily.
When a person in your group is on
another call on the DN the incoming group
call is on, the group call is put in Camp-on
or Call Waiting mode.
When a person in your group is on a
conference call or another group call, he
or she is not connected to your group call.
After all the people in the group
have answered, only the person who made
the group call can put the call on hold.
To answer a Group Call:
Lift the handset or press a DN Key.
If you are on a call and you hear three
10-second tones through the handset or
speaker, you are being notified of an
incoming group call on your current DN.
If you are on a call on another telephone in
your group when a group call is made,
you hear a long tone through the handset
or speaker.
47
To talk with more than one person: Call Join - Privacy Release
If you are on a conference call or a group
call when another group call comes in, you
are not notified of the second call.
To end a Group Call:
Replace the handset or press Release.
When the person who made the group call
disconnects, all the members of the group
are disconnected from the call. However,
the other members can disconnect at any
time during the call without affecting the
call.
Call Join
To connect a call on hold (on a
different line) to your current call:
1. You are currently on a call.
ø
2. Press Conference.
∫Call Wait
3. Press the key that has the other call on
hold, e.g. Call Wait, or DN Key.
ø
4. Press Conference.
The person on hold joins your
conversation.
Privacy Release
Privacy Release allows one or more people who share your DN to join your call.
This feature is not available on the MSL-100.
To use Privacy Release:
§
Press Privacy Release during a call. One
person can now join in by pressing the DN
Key beside the flashing º.
Repeat Step 1 above to join additional
appearances of the DN.
To talk with more than one person
48
Working without interruption: Call Forward
Working without interruption
This chapter describes features that allow you to avoid receiving calls.
Call Forward
Call Forward allows you to transfer all your calls so that they ring at another DN.
You cannot forward calls while your telephone is ringing.
To forward all your calls:
∑
1. Press Forward. The LCD indicator º
flashes.
2. Dial the DN that you want to forward
your calls to.
∑
3. Press Forward. The LCD indicator º
remains on.
To cancel Call Forward:
∑
Press Forward. The LCD indicator º turns
off.
To reinstate Call Forward to the same number:
∑
∑
Press Forward twice. The LCD indicator º
turns on again.
To display the number to which you are currently forwarding your internal calls (on
telephones equipped with an appropriate display):
œor
∫Inspect
1. Press Display.
On the MSL-100, press Inspect.
∑
œ
2. Press Forward. The number is
displayed.
3. If you want to clear the display, press
Display again.
You can forward calls to Meridian Mail by
using the Meridian Mail DN as your Call
Forward DN.
49
Working without interruption: Make Busy
Make Busy
Make Busy allows you to make your telephone appear busy to all callers.
To make your telephone appear
busy:
¡
Press Make Busy.
To receive calls again:
¡
Press Make Busy again.
50
Hospitality features: Automatic Wake-Up on Your Own Telephone
Hospitality features
These hospitality features are intended primarily for hotel operations use.
Automatic Wake-Up on Your Own Telephone
Although normally used as a hotel feature, Automatic Wake-up may be useful to
business users who require a timed reminder call feature. From your telephone
you may program the Meridian 1 system to automatically place a call to you at a
predetermined time. When you answer the call, you will hear recorded music for
up to thirty seconds followed by a prerecorded announcement, or the attendant.
To enter the time for a wake-up call:
1. Lift the handset or press a DN Key.
2. Dial the Wake-Up Request FFC.
3. Dial the wake-up time in a 24-hour
format (hh mm).
Note: In 24-hour format, 7:30 AM is
entered as 0730; 9:45 PM is 2145.
4. Replace the handset or press Release.
To cancel a wake-up call:
1. Lift the handset or press a DN Key.
2. Dial the Wake-Up Cancel FFC.
3. Replace the handset or press Release.
To verify the time for the wake-up
call:
1. Lift the handset or press a DN Key.
51
Hospitality features: Automatic Wake-Up - Message Registration
2. Dial the Wake-Up Verify FFC.
3. Dial the wake-up time in a 24 hour
format (hh mm). If it is correct, you
hear a confirmation tone.
Note: In 24-hour format, 7:30 AM is
entered as 0730; 9:45 PM is 2145.
4. Replace the handset or press Release.
Message Registration
If your telephone is equipped with a display, you can read, change, or reset
meters that log hotel telephone calls.
To read meters:
™
1. Press Message Registration.
2. Dial the room DN.
™
3. Press Message Registration again.
To change a meter:
™
1. Press Message Registration.
2. Dial the room DN.
3. Dial the correct meter count.
•
4. Press Star.
™
5. Press Message Registration.
To reset a meter to zero:
™
1. Press Message Registration.
52
Hospitality features: Maid Identification
2. Dial the room DN number.
•
3. Press Star.
™
Press Message Registration.
Maid Identification
Maid ID makes it easier to keep track of which maids clean which rooms. The
maid enters the information from the telephone in each room.
To enter cleaning status:
1. Lift the handset or press a DN Key.
2. Dial the Maid ID FFC.
3. Dial one of the following cleaning
status codes:
⁄ = cleaning requested
¤ = cleaning in progress
‹ = room cleaned
› = room passed inspection
fi = room failed inspection
fl = cleaning skipped
‡ = not for sale
You hear interrupted dial tone.
•
£
4. Press Star.
5. Dial the Maid ID. If you enter the
wrong Maid ID, press Pound Sign and
then reenter the ID.
6. Press Pound Sign.
53
Hospitality features: Room Status
7. Replace the handset or press Release.
Room Status
Room Status lets you read the status of a room using the Display Module.
To read the status of a room:
ª
1. Press Status.
2. Dial the DN for the room. The DN is
displayed followed by a two-digit
code.
The first digit indicates the occupancy
status:
0 = room vacant
1 = room occupied
The next digit indicates the cleaning status
of the room:
1 = cleaning requested
2 = cleaning in progress
3 = room cleaned
4 = room passed inspection
5 = room failed inspection
6 = cleaning skipped
7 = not for sale
ª
3. Press Status again.
54
Hospitality features: Room Status
To change the status of a room:
ª
1. Press Status.
2. Dial the DN for the room. The DN is
displayed followed by a two-digit
code.
The first digit indicates the occupancy
status:
0 = room vacant
1 = room occupied
The next digit indicates the cleaning status
of the room:
1 = cleaning requested
2 = cleaning in progress
3 = room cleaned
4 = room passed inspection
5 = room failed inspection
6 = cleaning skipped
7 = not for sale
3. Dial the status code you want to
assign to the room. A three-digit code
appears. The first digit indicates the
occupancy status. The second digit is
the old cleaning status, and the third is
the new cleaning status you just
entered.
ª
4. Press Status again.
55
Hospitality features: Automatic Wake-Up for a Guest
Automatic Wake-Up for a Guest (Option 11C Compact)
From your telephone you may program the Meridian 1 Option 11C Compact
telephone system to automatically place a call to your guest at a predetermined
time. When the guest answers the call, they will hear recorded music for up to
thirty seconds followed by a prerecorded announcement, or the attendant.
To enter the time for a wake-up call:
∫Wake-Up
1. Press the Wake-Up key.
2. Dial the guest’s extension number.
£
3. Press Pound Sign.
4. Dial the wake-up time in a 24-hour
format (hh mm).
∫Wake-Up
5. Press the Wake-Up key.
To cancel a wake-up call:
∫Wake-Up
1. Press the Wake-Up key.
2. Dial the guest’s extension number.
£
3. Press Pound Sign.
∫Wake-Up
4. Press the Wake-Up key.
To verify the time for the wake-up
call:
∫Wake-Up
1. Press the Wake-Up key.
2. Dial the guest’s extension number.
£
3. Press Pound Sign.
56
Hospitality features: Controlled Class Of Service
4. Look at the display to verify the
wake-up time programmed.
®
5. Press the Release key.
Note: In 24-hour format, 7:30 AM is
entered as 0730; 9:45 PM is 2145.
Controlled Class Of Service (Option 11C Compact)
With the Controlled Class Of Service (COS) feature, you may program the
Meridian 1 Option 11C Compact telephone system to restrict specific room
extensions from making long distance extensions.
To activate Controlled Class Of
Service (COS):
∫Cont COS
1. Press the Cont COS key.
2. Dial the guest’s extension number.
∫Cont COS
3. Press the Cont COS key again. The
LCD indicator is on.
®
4. Press the Release key.
To deactivate Controlled Class Of
Service (COS):
∫Cont COS
1. Press the Cont COS key.
2. Dial the guest’s extension number.
∫Cont COS
3. Press the Cont COS key again. The
LCD indicator flashes.
®
4. Press the Release key.
57
Options
Options
Optional items are available for use with your Meridian Digital Telephone. Please
contact your System Administrator for further details.
Key Expansion Module
The Key Expansion Module provides 22
additional feature keys for the M2616. You
can add up to two Key Expansion
modules, for a total of 62 feature keys.
External Alerter Interface
The External Alerter Interface lets you
connect a remote ringer to your telephone.
It can be used with all three models. The
remote ringer is provided by your supplier.
Meridian Communications Adapter
(MCA)
The MCA lets you connect your telephone
to a personal computer or terminal. You
can then use your telephone to exchange
data between your computer and other
computers. The MCA can be used with all
three models.
Analog Terminal Adapter (ATA)
Meridian Display Option
The ATA allows you to connect an analog
device such as a modem or fax machine to
your telephone, and allows you to use
these devices while you are on a telephone
call. The ATA can be used with all three
models.
The Meridian Display Option provides
status information and also assists you in
programming options and features on your
Meridian Digital Telephone. The Display
Module Option in not available on the
M2006.
58
Your Telephone’s Controls
Your Telephone’s Controls
Volume bar
Use ® to control the volume of the handset, the speaker, and the ringer.
Raise the volume by pressing the right side of the bar. Lower it by pressing the left
side.
Microphone
A microphone is integrated into the M2616 and M2008HF telephones, allowing
you to have a telephone conversation without using the handset (known as
Handsfree calling).
Release
You can terminate an active call by pressing ®, or by hanging up the
handset. ® is especially useful for disconnecting handsfree calls.
LCD indicator
A steady º appearing in one of the LCD indicators means that the feature or line
beside it is active. A flashing º means the line is on hold or the feature is being
programmed.
Hold
By pressing ˙, you can put an active call on hold. Return to the caller by
pressing the extension key beside the flashin gº.
Handset
Lift the handset to place or answer a call.
Feature keys
You access telephone features and telephone lines with the feature keys. The keys
are labeled for your convenience.
Main extension key or Directory Number (DN) key
The lower right-hand key is the main extension key, also known as a Directory
Number (DN) key. When you pick up the handset, the line associated with this key
is ready for you to make a call. You may have more than one DN key assigned to
your telephone. (This does not apply to the M2006 since it only supports one line.)
Message Waiting light
The Message Waiting light turns on to indicate that a message has been left for
you.
Program
The P key gives you access to several parameters through the Display
Module Option. You can adjust the volume of the ringer, buzzer, speaker, and
handset. You can turn key clicking on or off, adjust the display contrast, choose
the display language, set the format of the date and time, and turn the call timer
on or off. If you also have a Meridian 1 Communications Adapter, (see “MCA”),
you can also set your data parameters.
59
Terms you should know
Terms you should know
Attendant — the attendant is a telephone operator in your organization.
Directory Number (DN) — a DN is any extension on a telephone.
Flexible Feature Codes (FFCs) - your system may use FFCs to access some of your
telephone’s features. For your convenience, the FFCs for your system can be
printed on a page located at the back of this guide.
Meridian 1 — the Meridian 1 PBX is an office communications system.
Meridian SL-100 (MSL-100) — the MSL-100 is a large scale office
communications system.
Private Line — a Private Line may be assigned to your telephone. With this line,
you may reach any outside number without dialing the digit(s) which you
normally use to get an outside line. Internal extensions cannot be dialed from a
private line.
Paging tone—tone heard when using the Radio Paging feature. You hear two
beeps followed by dial tone.
Primary Directory Number (DN) Key—the key on your telephone which
corresponds to the main number for the telephone.
Ringback/ring tone— ringback/ring tone is the sound you hear when a call
you’ve made is ringing at its destination.
Interrupted dial tone— a broken, or pulsed dial tone that you will hear when
accessing some of your telephone’s features.
Special dial tone— three consecutive tones followed by dial tone that you will
hear when accessing some of your telephone’s features.
Shared Directory Numbers — a DN (extension) that is shared by two or more
persons.
Special Prefix Code (SPRE) — the Special Prefix Code is a number you will need
to enter to activate many of the features on your telephone. For example, when
you read "Enter the SPRE code plus 87", first enter the SPRE code then press 87.
For your convenience, the SPRE code and FFCs for your system can be printed in
the tables located on page 61.
Note: Meridian SL-100 codes can be different from customer to customer.
Check with your communications group for feature code prefixes.
Switchhook — the switchhook is the button which the handset presses down,
disconnecting your call when you replace the handset.
60
Special Prefix Code (SPRE) and Flexible Feature Codes (FFCs)
Special Prefix Code (SPRE)
Special Prefix Code (SPRE)
Flexible Feature Codes (FFCs)
Radio Paging
Trace
Radio Paging Access
Radio Paging Answer
Call Park
Group Call
Call Pick Up
DN Pick Up
Maid ID
Group Pick Up
Wake-Up Request
Wake-Up Verify
Wake-Up Cancel
Remote Call Forward Activate
Remote Call Forward Verify
Remote Call Forward Deactivate
Electronic Lock Password
Change
Call Forward Destination
Deactivation
Lock
Call Detail Recording
Unlock
61
Index
Index
Index
A
Attendant 60
Attendant Recall 34
Auto Dial 16
Auto Dial Transfer 34
Automatic Answerback 30
Automatic Wake-up for a Guest 56
Automatic Wake-Up on Your Own Telephone 51
B
Buzz 21
C
Call Charge 35
Call Forward 38, 49
Call Forward, Internal 39
Call Join 48
Call Page 19
Call Park 33
Call Pickup 30
Call timer Enable 8
Call Transfer 12, 31
Call Waiting 30
Camp-on, Forced 22
Conference 45
Contrast Adjustment 7
Controlled Class Of Service (Option 11C Compact) 57
62
Index
Controls, telephone 6, 59
Index
D
Dial Tone
interrupted 60
special 60
Direct Inward System Access 40, 41
Directory Number 60
Display 16, 21, 35, 38, 39, 49
Display Diagnostics 9
DN 60
E
Enhanced Override 20
External Alerter Interface 58
F
Feature keys 59
Features, telephone 10
Flexible Feature Codes (FFCs) 61
Forced Camp-on 22
G
Group Call 47
Group Listening 15
H
Handset 59
Handsfree 14
HOLD 59
63
Index
Index
Hold 11, 27
Hot Line 24
I
Idle Screen Format 8
Intercom 44
Internal Call Forward 39
Interrupted dial tone 60
K
Key Click 9
Key Expansion Module 58
L
Language Selection 9
Last Number Redial 14
LCD indicator 59
M
Main extension key 59
Make Busy 50
Making Calls 10
Malicious Call Trace 35
Meridian 1 60
Meridian Communications Adapter 58
Meridian SL-100 (MSL-100) 60
Message Registration 52
Message Waiting light 59
Microphone 59
64
Index
Index
O
On Hold on Loudspeaker 35
On-hook dialing 13
Options 58
Override 20
Override, Enhanced 20
P
Paging tone 60
Predial Recall 7, 13
Primary Directory Number (DN) key 60
Privacy Release 48
Private Line 60
R
Radio Paging 24
Release 14
Remote Call Forward 40
Ringback/ring tone 60
RLS 59
Rls 14
Room Status 54
S
Shared Directory Numbers 60
Special dial tone 60
Special Prefix Code (SPRE) 60, 61
Speed Call 17
Speed Call on Private Lines 18
Speed Call, System 19
65
Index
Stored Number 21
Switchhook 60
System Speed Call 19
T
Terms 60
Timed Recall Reminder 30
V
Voice Call 26
Volume adjustment 7
Volume bar 59
66
While you are away from your desk: Call Forward
38
Title to and ownership of Meridian SL-1 software shall at all times
remain with Northern Telecom. Meridian SL-1 software shall not be
sold outright and the use thereof by the customer shall be subject
to the parties entering into software agreements as specified
by Northern Telecom.
Information contained in this document is subject to change.
Northern Telecom reserves the right, without notice, to make
changes in equipment design or program components as progress
in engineering, manufacturing or technology may warrant.
Reordering number:NT5F50AC A0773347
(c/o 15 each per package P0902627)
Internal Manufacturing part number:
P0902627
Issue 1.00
Printed in the United States of America
March 1999
|