Nokia NAVIGATOR 6210 User Manual

Electronic user’s guide released subject to "Nokia User’s Guides Terms and Conditions, 7th June, 1998"

User guide

9352375

Issue 1

Quick & easy

Thank you for choosing this phone! These pages give you some tips on using your phone. For more

detailed information, read through the user guide.

✁ Making your first call

Before you can make your first call, see Getting started on page 22 to learn how to

• insert the SIM card,

• install and charge the battery,

• switch on your phone.

1. Key in the area code and phone number and press

2. Press to end the call.

✁ Call functions

Making a call

Key in the area code and phone number and press

Answering a call

Press

Ending / Rejecting a call

Press

Adjusting earpiece volume

Press the volume keys on the side of the phone.

Last number redial

Press

in the standby mode to access the list of last dialled numbers. Scroll with

the desired number and press

Calling your voice mailbox

Press and hold

. If you are asked for the voice mailbox number, key it in and press OK.

Calling by using a voice tag

First you need to add a voice tag to a number, see Voice dialling feature on page 38. Then press and

hold Names and say the voice tag to make a call.

✁ Phone book functions

Quick save

Key in the phone number and press Options. Select Save and key in the name and press OK.

Quick find

In the standby mode, press

, key in the first letter of the name, then scroll with

to the

desired name.

✁ Entering menus

Entering a menu

Press Menu, scroll with

to the desired menu function and press Select.

Exiting a menu

Press

to exit a menu function without changing its settings and return to standby mode.

✁ Other essential functions

Locking / Unlocking the keypad

Press Menu, then

(within 2 seconds). Press Unlock, then

Quick exit

Press

to exit any function and to return to the standby mode.

Contents

Quick & easy ...................................................................................................................................... 3

Contents ............................................................................................................................................. 6

For your safety................................................................................................................................. 13

General information........................................................................................................................ 15

Stickers in the sales package ....................................................................................................................................................... 15

Security code .................................................................................................................................................................................... 15

Network services.............................................................................................................................................................................. 15

Accessories ........................................................................................................................................................................................ 16

Typographics used in this guide.................................................................................................................................................. 16

1. Your phone.................................................................................................................................. 17

The display indicators..................................................................................................................................................................... 18

Standby mode ............................................................................................................................................................................... 18

List of essential indicators in the standby mode ................................................................................................................ 19

The selection keys ........................................................................................................................................................................ 20

Keypad lock (Keyguard).................................................................................................................................................................. 20

To lock the keypad:...................................................................................................................................................................... 21

To unlock the keypad:................................................................................................................................................................. 21

When the keyguard is on:.......................................................................................................................................................... 21

2. Getting started ........................................................................................................................... 22

Installing the SIM card................................................................................................................................................................... 22

Charging the battery ...................................................................................................................................................................... 23

Switching the phone on and off ................................................................................................................................................. 25

If the phone requests a PIN code:........................................................................................................................................... 25

If the phone requests a security code:................................................................................................................................... 25

3. Call functions ............................................................................................................................. 27

Making and answering calls ......................................................................................................................................................... 27

Making calls................................................................................................................................................................................... 27

International calls..................................................................................................................................................................... 27

Making a call using the phone book ................................................................................................................................... 28

Last number redial.................................................................................................................................................................... 28

Calling your voice mailbox..................................................................................................................................................... 28

Speed dialling a phone number ............................................................................................................................................ 28

Answering a call............................................................................................................................................................................ 29

In-call options................................................................................................................................................................................... 29

Call waiting.................................................................................................................................................................................... 30

Call holding .................................................................................................................................................................................... 30

Making a conference call........................................................................................................................................................... 31

Transferring a call......................................................................................................................................................................... 31

4. Phone book (Names).................................................................................................................. 32

About the phone book.................................................................................................................................................................... 32

Entering a phone book function............................................................................................................................................... 32

Selecting the phone book ......................................................................................................................................................... 33

Copying phone books .................................................................................................................................................................. 33

Storing names and numbers...................................................................................................................................................... 34

Setting the type of view for stored names and numbers.............................................................................................. 35

Storing multiple numbers and text items per name .......................................................................................................... 36

Adding a new number or text item to a name:................................................................................................................ 36

To change the default number:............................................................................................................................................. 37

Searching and calling from the phone book......................................................................................................................... 37

Calling service numbers .......................................................................................................................................................... 38

Voice dialling feature .................................................................................................................................................................. 38

Adding a voice tag to a phone number.............................................................................................................................. 39

Making a call by using a voice tag...................................................................................................................................... 40

Replaying a voice tag .............................................................................................................................................................. 41

Changing a voice tag............................................................................................................................................................... 41

Erasing a voice tag................................................................................................................................................................... 41

Assigning a phone number to a speed dial key................................................................................................................... 42

Making a call by using the speed dialling keys................................................................................................................ 42

Organising the phone book....................................................................................................................................................... 43

Editing a name and number .................................................................................................................................................. 43

Erasing a name and number.................................................................................................................................................. 43

Sending and receiving names and phone numbers............................................................................................................ 44

Copying via IR ............................................................................................................................................................................... 44

Copying a name and number from your phone............................................................................................................... 44

Copying a name and phone number to your phone....................................................................................................... 44

Caller groups.................................................................................................................................................................................. 45

Adding a name and phone number in a caller group..................................................................................................... 45

Setting a ringing tone and graphic for a caller group and renaming a caller group............................................ 46

Removing a name and number from a caller group....................................................................................................... 47

Memory status.............................................................................................................................................................................. 47

5. Using the Menu.......................................................................................................................... 48

Accessing a menu function by scrolling ................................................................................................................................... 48

Accessing a menu function by using its shortcut number .................................................................................................. 49

List of menu functions................................................................................................................................................................... 50

6. Menu functions .......................................................................................................................... 53

Messages (Menu 1)......................................................................................................................................................................... 53

Writing and sending text messages........................................................................................................................................ 53

Predictive text input ................................................................................................................................................................ 54

Standard answers and templates ......................................................................................................................................... 57

Inserting pictures ...................................................................................................................................................................... 57

Reading and viewing text and picture messages................................................................................................................ 59

Replying to a message............................................................................................................................................................. 60

Special sending options.............................................................................................................................................................. 61

Sending a message to multiple recipients......................................................................................................................... 61

Sending a message by message profile .............................................................................................................................. 61

Organising your messages.......................................................................................................................................................... 62

Inbox and Outbox folders ....................................................................................................................................................... 62

Archive folder and user-specified folders .......................................................................................................................... 62

Message settings .......................................................................................................................................................................... 63

Settings common to all messages........................................................................................................................................ 64

Message profiles........................................................................................................................................................................ 65

Call register (Menu 2)..................................................................................................................................................................... 65

Missed calls (Menu 2-1)............................................................................................................................................................. 66

Received calls (Menu 2-2) ......................................................................................................................................................... 66

Dialled numbers (Menu 2-3)..................................................................................................................................................... 66

Erase recent call lists (Menu 2-4)............................................................................................................................................ 67

Call duration (Menu 2-5) ........................................................................................................................................................... 67

Call costs (Menu 2-6).................................................................................................................................................................. 67

Profiles (Menu 3) ............................................................................................................................................................................ 68

Activating a user profile............................................................................................................................................................. 68

Customising Profiles.................................................................................................................................................................... 69

Settings you can personalise................................................................................................................................................. 69

Renaming profiles......................................................................................................................................................................... 71

Settings (Menu 4) ............................................................................................................................................................................ 71

Alarm clock (Menu 4-1).............................................................................................................................................................. 71

Clock (Menu 4-2).......................................................................................................................................................................... 72

Call settings (Menu 4-3) ............................................................................................................................................................ 73

Anykey answer (Menu 4-3-1)............................................................................................................................................... 73

Automatic redial (Menu 4-3-2)............................................................................................................................................ 73

Speed dialling (Menu 4-3-3)................................................................................................................................................. 73

Call waiting service (Menu 4-3-4) ...................................................................................................................................... 73

Line for outgoing calls (Menu 4-3-5)................................................................................................................................. 73

Summary after call (Menu 4-3-6) ....................................................................................................................................... 74

Fax or data call (Menu 4-3-7).............................................................................................................................................. 74

Own number sending (Menu 4-3-8)................................................................................................................................... 74

Phone settings (Menu 4-4) ....................................................................................................................................................... 74

Language (Menu 4-4-1) ......................................................................................................................................................... 74

Cell info display (Menu 4-4-2)............................................................................................................................................. 75

Welcome note (Menu 4-4-3)................................................................................................................................................ 75

Network selection (Menu 4-4-4)......................................................................................................................................... 75

Confirm SIM service actions (Menu 4-4-5)...................................................................................................................... 75

Communication settings (Menu 4-5)..................................................................................................................................... 76

Info service (Menu 4-5-1)...................................................................................................................................................... 76

Listen to voice messages (Menu 4-5-2)............................................................................................................................. 76

Voice mailbox number (Menu 4-5-3)................................................................................................................................. 77

Service command editor (Menu 4-5-4) ............................................................................................................................. 77

Security settings (Menu 4-6).................................................................................................................................................... 77

PIN code request (Menu 4-6-1) ........................................................................................................................................... 77

Call barring service (Menu 4-6-2)....................................................................................................................................... 77

Fixed dialling (Menu 4-6-3) .................................................................................................................................................. 78

Closed user group (Menu 4-6-4).......................................................................................................................................... 78

Security level (Menu 4-6-5).................................................................................................................................................. 79

Change of access codes (Menu 4-6-6)............................................................................................................................... 79

Restore factory settings (Menu 4-7)................................................................................................................................... 80

Call divert (Menu 5)........................................................................................................................................................................ 80

Games (Menu 6)............................................................................................................................................................................... 82

To start a new game.................................................................................................................................................................... 82

To start a 2-player game............................................................................................................................................................ 82

Game options................................................................................................................................................................................. 82

Calculator (Menu 7) ........................................................................................................................................................................ 83

Using the calculator..................................................................................................................................................................... 83

To make a currency conversion ................................................................................................................................................ 84

Calendar (Menu 8)........................................................................................................................................................................... 84

Calendar views .............................................................................................................................................................................. 85

Day view ...................................................................................................................................................................................... 85

Note view .................................................................................................................................................................................... 85

Week list...................................................................................................................................................................................... 85

Options list of calendar views................................................................................................................................................... 85

Adding a calendar note............................................................................................................................................................... 86

When the phone alarms for a note...................................................................................................................................... 87

Infrared (Menu 9)............................................................................................................................................................................. 87

To send and receive data via IR................................................................................................................................................ 88

Checking the status of an IR connection .............................................................................................................................. 88

Services (Menu 10)......................................................................................................................................................................... 88

Storing or editing connection settings for a connection set........................................................................................... 89

Saving a homepage address ...................................................................................................................................................... 90

Using services ................................................................................................................................................................................ 91

Activating a connection set................................................................................................................................................... 91

Starting to use a service ......................................................................................................................................................... 91

To quit browsing........................................................................................................................................................................ 92

Saving a service as a bookmark................................................................................................................................................ 92

Using a service saved as a bookmark...................................................................................................................................... 92

Emptying the cache ..................................................................................................................................................................... 93

Security certificates..................................................................................................................................................................... 93

SIM services (Menu 11) ................................................................................................................................................................. 94

7. Data and fax communications................................................................................................... 95

Connecting your phone to a computer ..................................................................................................................................... 95

Installing communications applications and modem drivers.......................................................................................... 95

HSCSD - High Speed Circuit Switched Data..................................................................................................................... 96

Using communications applications....................................................................................................................................... 96

8. Reference information ............................................................................................................... 98

Removing and replacing the Personal badge .......................................................................................................................... 98

Removing the badge ................................................................................................................................................................... 98

Replacing the badge.................................................................................................................................................................... 98

Access codes ..................................................................................................................................................................................... 99

Security code (5 digits)............................................................................................................................................................... 99

PIN code (4 to 8 digits)............................................................................................................................................................. 100

PIN2 code (4 to 8 digits).......................................................................................................................................................... 100

PUK code (8 digits) .................................................................................................................................................................... 100

PUK2 code (8 digit).................................................................................................................................................................... 100

Barring password........................................................................................................................................................................ 100

Battery information ...................................................................................................................................................................... 101

Charging and discharging the battery ................................................................................................................................. 101

Using the batteries................................................................................................................................................................. 102

Care and maintenance................................................................................................................... 103

Important safety information....................................................................................................... 104

For your safety

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed

information is given in this manual.

ROAD SAFETY COMES FIRST

Don’t use a hand-held phone while driving; park the vehicle first.

INTERFERENCE

All wireless phones may get interference which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless phones can cause interference. Using them on aircraft is illegal.

SWITCH OFF WHEN REFUELING

Don’t use phone at a refuelling point. Don’t use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don’t use phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

USE SENSIBLY

Use only in normal position (to ear). Don’t touch the antenna unnecessarily.

USE QUALIFIED SERVICE

Only qualified service personnel must install or repair equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible products.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user’s guide for detailed safety instructions. Do not

connect incompatible products. Remember to make backup copies of all important data.

MAKING CALLS

Ensure the phone is switched on and in service. Enter the phone number, including the area code, then

press

. To end a call press

. To answer a call press

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as needed (e.g. to exit a call,

to exit a menu, etc.) to clear the display. Enter the emergency number, then press

location. Do not end the call until told to do so.

. Give your

INFRARED PRECAUTIONS

Do not point the IR beam at anyones’s eyes or allow it to interfere with other IR devices.

General information

This chapter gives you some general information on your new Nokia phone and this user guide.

✁ Stickers in the sales package

The stickers contain important information for service and customer support purposes.

Attach the sticker on page 2 of this user guide.

Attach the sticker with the text “ITEM” and “IMEI” to the Nokia Club Invitation Card supplied in the

sales package.

✁ Security code

The factory setting for the security code is 12345. To avoid unauthorised use of your phone, change the

code in the Settings menu, see Security level (Menu 4-6-5) on page 79 and Change of access codes

(Menu 4-6-6) on page 79. Keep the new code secret and in a safe place separate from your phone.

✁ Network services

The wireless phone described in this user guide is approved for use on the EGSM 900 and GSM 1800

networks.

Note that Dual band functionality is a network-dependent feature. Check with your local service

provider if you can subscribe to and use the dual band functionality.

A number of features included in this user’s guide are called network services. They are special services

provided by wireless service providers. Before you can take advantage of any of these network services,

you must subscribe to these service(s) from your home service provider and obtain instructions for

their use.

✁ Accessories

The following manufacturer-approved rechargeable batteries are available for your phone: Li-Ion

batteries BLS-2N and BLS-4, NiMH batteries BMS-2S and BMS-2V and Li-Polymer battery BPS-1.

This apparatus is intended for use when supplied with power from ACP-7, ACP-8, ACP-9 and LCH-9

battery chargers. Other usage will invalidate any approval given to this apparatus and may be

dangerous.

Warning! Use only batteries, chargers and accessories approved by the phone

manufacturer for use with this particular phone model. The use of any other types will

invalidate any approval or warranty applying to the phone, and may be dangerous.

For availability of approved accessories, please check with your dealer.

When you disconnect the power cord of any accessory, grasp and pull the plug, not the

cord.

✁ Typographics used in this guide

The display texts that appear on the phone display are indicated in italic type face, for example Calling.

The display texts related to the selection keys are indicated in bold type face, for example Answer. Only

the selection key texts without the key symbols are shown in the text.

In this user guide all key presses are represented by icons such as

and

1. Your phone

The phone is equipped with the keys given below.

Power key: Switches the phone on or off. Pressing this key

briefly while in the standby mode or during a call will result in

the list of profiles being displayed. Pressing the power key

briefly while in the phone book or menu functions will turn

the phone’s display light on for 15 seconds.

Selection keys: Each of these keys performs the function

indicated by the text shown on the display immediately above

it, e.g. Select or OK.

Scroll keys: Use these keys to scroll through names, phone

numbers, menus or setting options.

Dials a phone number and answers a call. When in the

standby mode: shows the most recently dialled number.

1. Power key

Ends or rejects a call. Also exits from any function at any time.

2. Infrared (IR) port

3. Volume keys

Enter numbers and characters.

when pressed and held.

calls your voice mailbox

4. Connectors for exter-

nal devices

Used for various purposes in different functions.

Volume keys: The upper key increases and the lower key

decreases the earpiece volume.

✁ The display indicators

Display indicators and icons inform you about the operation of your phone.

Standby mode

The indicators described below are shown when the phone is ready for use, with

no characters entered by the user. This screen is called standby mode.

xxxxxxx

Indicates in which cellular network the phone is currently used.

Shows the signal strength of the cellular network at your current location. The higher the bar,

the stronger the signal.

Shows the battery charge level. The higher the bar, the more power in the battery.

List of essential indicators in the standby mode

In addition to the above three indicators, one or more of the following icons may be shown when the

phone is in the standby mode:

Indicates that you have received one or several text or picture messages. See Messages (Menu

1) on page 53.

Indicates that you have received one or several voice messages. See Messages (Menu 1) on

page 53.

Indicates that the phone doesn’t ring at an incoming call. See Profiles (Menu 3) on page 68.

Indicates that the phone’s keypad is locked. See Keypad lock (Keyguard) on page 20.

Indicates that you have set the alarm clock to On. See Alarm clock (Menu 4-1) on page 71.

Indicates that all your calls are diverted. See Call divert (Menu 5) on page 80.

Indicates that your calls are limited to a closed user group (network service). See Closed user

group (Menu 4-6-4) on page 78.

The selection keys

Below the display you will find the two selection keys:

The function of these keys depends on the guiding texts shown above the keys. For example, when the

text Menu appears above the

key, pressing this key enters the menu functions.

Similarly, pressing the key under the text Names allows access to he phone book functions.

Pressing and holding Names activates voice dialling.

In this user guide, the selection keys are indicated by the relevant guiding text in bold type.

✁ Keypad lock (Keyguard)

This feature locks the keypad to prevent the keys being accidentally pressed (for example when your

phone is in your pocket or in your purse).

To lock the keypad:

When in the standby mode, press Menu and then

within two

seconds.

When the keypad is locked,

appears at the top of the display.

To unlock the keypad:

Press Unlock and then

When the keyguard is on:

To answer a call, press

. To end or reject a call, press

. During a call, the phone can be operated

in the normal way.

Note: When Keyguard is on, calls may be possible to the emergency number programmed

into your phone (e.g. 112 or other official emergency number).

Key in the emergency number and press

keyed in its last digit.

. The number is displayed only after you have

2. Getting started

✁ Installing the SIM card

• Keep all miniature SIM cards out of the reach of small children.

• The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when

handling, inserting or removing the card.

• Before installing the SIM card, always make sure that the phone is switched off and then remove

the battery.

1. With the back of the phone facing you, press the release button

(1.). Slide the battery off the phone (2.).

2. Release the SIM card holder by sliding it to the right.

3. Insert the SIM card ensuring that the bevelled corner is on the

bottom right and the golden contact area is facing downwards.

4. Slide the card holder to the left to lock the card in its place.

5. Place the battery on the back of the phone and slide it up the

body of the phone until it locks into place.

✁ Charging the battery

1. Attach the lead from the charger to the socket on the bottom of

your phone.

2. Connect the charger to an AC wall outlet. The battery indicator bar starts to scroll.

The text Charging is displayed briefly if the phone is switched on. You can use the phone

while charging.

If the battery is totally flat, it may take a few minutes before the charging indication

appears on the display or any calls can be made.

The charging time depends on the charger and battery used. For example, charging a BLS-

2 battery takes about 4 hours.

3. The battery is fully charged when the battery indicator bar stops scrolling, and the text Battery full

is briefly displayed (if the phone is on).

4. Disconnect the charger first from the AC outlet and then from the phone.

If the text Not charging is displayed, charging has been suspended. Wait for a while, disconnect the

charger, plug it in again and retry. If charging still fails, contact your dealer.

For more information, see Battery informationon page 101.

✁ Switching the phone on and off

Press and hold the

key for a second.

If the phone requests a PIN code:

The PIN code is usually supplied with the SIM card.

• Key in the PIN code (displayed as ****), and press OK.

See also Access codes on page 99.

Warning! Do not switch on the phone when wireless phone use is prohibited or when it

may cause interference or danger.

Note: Your phone has a built-in antenna. As with any other radio-transmitting

device, do not touch the antenna unnecessarily when the phone is switched on.

Contact with the antenna affects call quality and may cause the phone to

operate at a higher power level than otherwise needed. Not touching the

antenna during a call optimizes the antenna performance and the talk-time of

your phone.

3. Call functions

✁ Making and answering calls

Making calls

1. Key in the phone number including the area code.

To edit a number on the display, press

to move the cursor to the right and

to move it to the

left. Press Clear to delete the character to the left of the cursor.

2. Press

3. Press

to call the number.

to end the call (or to cancel the call attempt).

Normal position: Hold the phone as you would hold any other telephone.

Note: When you are using the phone with the car kit CARK-91, you can switch from handsfree mode to

privacy mode by picking up the external handset HSU-1. To switch back to handsfree, first press

Options and then put down the handset within 5 seconds.

International calls

1. Press

code).

twice for the international prefix (the + character replaces the international access

2. Enter the country code, the area code without 0 and the phone number.

3. To call the number, press

Making a call using the phone book

1. Press Names.

2. Press Select when Search is highlighted.

3. Key in the first letter of the name and press Search.

4. Use

and

to reach the desired name.

5. Press

Last number redial

The last ten phone numbers you called or attempted to call are stored in the phone’s memory. To redial

one of these last-dialled numbers:

1. When in the standby mode, press

2. Use or to reach the desired number or name.

Calling your voice mailbox

1. Press and hold when in the standby mode.

once to access the list of the last-dialled numbers.

2. If the phone asks for the voice mailbox number, key it in and press OK. You obtain this number from

your service provider. To edit this number at a later time, see Voice mailbox number (Menu 4-5-3)

on page 77.

Speed dialling a phone number

If you have assigned a phone number to one of the speed dialling keys (

phone number in either of the following ways:

), you can call that

• Press the corresponding speed dialling key and press

• If the Speed dialling function is set to On: Press and hold the corresponding speed dialling key (

to ) until the call is started.

See Assigning a phone number to a speed dial key on page 42 and Speed dialling (Menu 4-3-3) on

page 73.

Note: Pressing and holding

dials your voice mailbox number.

Answering a call

1. To answer the call, press

2. Press

to end the call.

Tip: To reject an incoming call, press

. If the Divert if busy function is activated to

divert the calls, for example to your voice mailbox, rejecting an incoming call will also

divert the call. See Call divert (Menu 5) on page 80.

✁ In-call options

Your phone provides a number of functions that you can use during a call. Many of the in-call options

are network services.

By pressing Options during a call some or all of the following in-call options may be available:

• Hold or Unhold (to put a call on hold or to unhold a call)

• New call (to make a call when you have a call in progress)

• Send DTMF (to send DTMF tone strings stored in the phone book, for example, passwords or bank

account numbers)

• End all calls (to end all calls)

• Phone book (to access the phone book)

• Menu (to access the Menu)

• Mute (to mute the phone’s microphone)

• Swap (to switch between the active call and the call on hold)

• Transfer (to connect a call on hold with an active call and to disconnect yourself from both calls)

Call waiting

This network service allows you to answer an incoming call while you have a call in progress if you

have activated the menu function Call waiting service (Menu 4-3-4).

1. Press Answer or

. The first call is put on hold.

2. To switch between the two calls, press Swap or

3. To end the active call, press

, (or to end both calls at the same time, press Options, scroll to End

all calls and press OK.)

Tip: If you do not want to answer the call, you can ignore it or reject it. To reject the call,

press Options, then scroll to Reject and press OK. If you have activated the call divert

Divert if busy (Menu 5-2), a rejected call will also be diverted.

Call holding

This network service allows you to make another call while you have a call in progress.

1. Press Hold. The first call is put on hold.

2. Make the second call.

3. To switch between the two calls, press Swap or

To end the active call, press

Tip: You can also mute the line for a while. Press Options, scroll with

to Mute.

When you want to resume the muted call, press Unmute.

Making a conference call

This network service allows up to six persons to take part in a conference call.

1. Make a call to the first participant.

2. Press Options and scroll to New call and press Select. Make the call to the second participant. The

first call is put on hold.

3. To join the first participant in the conference call, press Options, choose Conference and press

Select.

4. To add a new person to the call, repeat steps 2 and 3.

5. To have a private conversation with one of the participants:

• Press Options, scroll to Private and press Select, then scroll to the desired participant and press

OK. Once you have finished the private conversation, return to the conference call as described

in step 3.

6. To end the conference call, press

Transferring a call

When you have one call active and one on hold, this network service allows you to connect the two

calls and to disconnect yourself from both calls.

4. Phone book (Names)

✁ About the phone book

You can store names and phone numbers in the phone’s internal phone book or in the memory of the

SIM card. You can only use one memory at a time. For storing names and phone numbers, see Storing

names and numbers on page 34.

• The phone’s internal phone book can store 500 names with 3 numbers and one textual note per

name. However, if you have less than 500 names stored in the phone's internal phone book, you

may be able to store up to 5 numbers and two textual notes per name. See Storing multiple

numbers and text items per name on page 36.

• The phone supports SIM cards that can store up to 250 names and phone numbers.

Entering a phone book function

• When in the standby mode: Press Names, scroll with

to the desired function and press

Select.

During a call: Press Options, scroll with

to Phone book, and press Select. Scroll to the

desired function and press Select.

Tip: To quickly access the list of stored names and numbers, press

when the

phone is in the standby mode.

The header line on top of the display helps you to locate where you are in the phone book.

Selecting the phone book

You can set the phone to use its internal phone book or the memory of the SIM card for storing names

and numbers.

Note: If you want to store multiple numbers and text items per name or attach voice tags to numbers,

you must set the phone to use its internal phone book. If you have the numbers stored in the SIM card,

first copy them to the phone. See Copying phone books on page 33.

1. When in the standby mode, press Names.

2. Scroll with

to Options and press Select.

3. Press Select when Memory in use is displayed.

4. Scroll to Phone (to set the phone to use its internal phone book) or SIM card (to set the phone to

use the memory of the SIM card) and press Select.

Note: After the SIM card is changed, the SIM phone book is automatically selected.

Copying phone books

You can copy names and phone number from the phone’s memory to your SIM card’s memory or vice

versa.

1. In the standby mode, press Names.

2. Scroll to Copy and press Select.

3. Scroll with

to the desired copying direction (From phone to SIM card or From SIM card

to phone) and press Select.

4. Scroll to One by one , All or Default Nos. and press Select.

If you selected One by one, scroll to the name you want to copy and press Copy.

Note that when you copy From SIM card to Phone, the text Default Nos. is not shown.

5. Select whether you want to keep the original names and numbers.

6. If you selected All or Default Nos., press OK when the text Start copying? is displayed.

Storing names and numbers

1. Press Names, scroll to Add name and press Select.

2. Key in the name; press a number key (

number appears. The most common punctuation marks and special characters are available under

the number key . To insert a space, press

) repeatedly until the desired character or

Note: All characters available under a number key are not printed on the key. The characters

available under a number key depend on the language selected in the menu 4-4-1.

Tip: When entering names in the phone book, the phone uses title case, which

automatically writes the first character of a name in upper case and the rest of the word in

lower case.

3. Press OK.

4. Key in an area code and phone number, and press OK. If you wish to add a voice tag, see Adding a

voice tag to a phone number on page 39.

Writing text:

• If the next letter is located on the same key as the present one, press

(or wait until the

cursor appears again) and then key in the letter.

• To switch between upper case and lower case, press

quickly. The symbol ABC or abc shown

at the top of the display indicates the selected case.

• To insert a number, press and hold the key labelled with the desired number. Number mode is

indicated by 123 at the top of the display. To switch between letters and numbers, press and

hold

• Pressing

brings up a list of special characters. Move through the list to the desired

or and press Use to insert it in the name.

• If the character list continues on to another screen, you can scroll between the screens by

pressing

character with

• If you make a mistake, you can remove characters to the left of the cursor by pressing Clear as

many times as necessary. Pressing and holding Clear will clear the screen.

•

and

move the cursor right and left, respectively.

Tip: If you key in the + character for the international prefix (press

twice) in front of

the country code, you will be able to use the same phone number when you are calling

from abroad.

Quick save:

When in the standby mode, key in the phone number, press Options, and select Save. Then,

enter the name and press OK.

Or, if you wish, save the number only: key in the phone number and press and hold Options.

Setting the type of view for stored names and numbers

You can set your phone to show the stored names and numbers in two different ways.

1. Press Names, scroll with

to Options and press Select.

2. Scroll to Type of view and press Select.

3. Scroll to Name list (shows three names at a time) or Name & number (shows one name and phone

number at a time) and press OK.

Storing multiple numbers and text items per name

You can use your phone as a contact manager, since the phone’s internal phone book allows you to

store multiple phone numbers as well as text, such as an E-mail address, a street address or a note

under a name. You can store up to 2 text items per name.

The first number stored under a name is automatically set as the default number. When you select a

name from the phone book, e.g. to make a call or to send a message, the default number is used unless

you select another number. You can store up to 5 numbers per name.

For each number or text item you can select a number type. If you do not select any number type,

will be used as the number type. The default number is indicated by the box around the number type

icon, e.g.

Adding a new number or text item to a name:

Multiple numbers can be stored only in the phone’s memory.

Note: Before storing names and numbers, change the memory in use from SIM card to Phone. For

instructions, see Selecting the phone book on page 33.

1. Enter the names list, for example, by pressing

2. Scroll with

to the name to which you want to add a new number or text item and press

Details.

3. Press Options and scroll to Add number or to Add text and press Select.

4. Scroll to one of the number or text types and press Select.

General (default type when no other type is selected)

Mobile

Home

Office

Fax

E-mail (text type)

Postal add: (text type)

Note (text type)

You can later change the number or text type by using the Change Type option in the option list.

5. Enter the number or enter the text and press OK to save it.

6. Press Options (and then repeat steps 3 - 4) if you wish to continue adding numbers or text items to

the name. Press Back, and then Exit to exit the phone book and to return to the standby mode.

To change the default number:

1. Once in the names list, scroll to the desired name and press Details.

2. Scroll with

to the number you want to set as the default number, press Options.

3. Scroll to Set as default and press Select.

Searching and calling from the phone book

1. In the standby mode, press Names.

2. Scroll to Search and press Select.

3. Key in the first character of the name (or press List to access the list of names) you are searching for

and press Search. The pop-up window appears.

4. Scroll with

to the desired name, or enter more search criteria in the pop-up window and

then scroll to the desired name.

5. Once the desired name is highlighted, press Details to view the details of the highlighted name, or

press

to call the highlighted name.

Tip: To quickly find a name and phone number, press

in the first letter(s) of the name, then scroll with

(when in the standby mode), key

or to the desired name.

Calling service numbers

Using this function you can easily call any of the service numbers your service provider may have

stored in your SIM card. This function is not displayed if there are no service numbers stored in your

SIM card.

1. In the standby mode, press Names.

2. Scroll with

to Service Nos. and press Select.

3. Scroll to the desired service number, and press

to call the number.

Voice dialling feature

The voice dialling feature allows you to make phone calls by saying a voice tag that has been added to

a desired phone number. Any spoken word(s) such as a person’s first name, surname and type of

number (e.g. Mobile) can be a voice tag.

Before using voice dialling, note that:

• Voice tags can be stored only in the phone’s memory. Save or copy the phone numbers, to which you

want to add a voice tag, in your phone’s memory.

• When recording a voice tag or making a call by saying a voice tag, hold the phone in the normal

position near to your ear.

• Voice tags are not language dependent. They are dependent on the speaker’s voice.

• Voice tags are sensitive to the background noise; record voice tags in a quiet environment.

• Very short names are not accepted; use long names and avoid similar names for different numbers.

Note: The phone must be in a service area with adequate cellular signal strength. Also, you must

say the name exactly as you said it when you recorded it. This may be difficult in, for example, a

noisy environment or during an emergency, so you should not rely solely upon voice dialling in all

circumstances.

Adding a voice tag to a phone number

Voice tags can only be added to the phone numbers stored in the phone’s memory. First, change the

memory in use from SIM card to Phone, see Selecting the phone book on page 33 for instructions.

Then, save a name and number(s) in the phone’s memory, see Storing names and numbers on page 34

and Storing multiple numbers and text items per name on page 36 for instructions.

1. Enter the names list, for example, by pressing

2. Scroll with or to the name to which you want to add a voice tag and press Details.

3. Use the scroll keys or to select the number to which you want to add a voice tag.

4. Press Options and scroll with or to Add voice tag and press Select.

5. Press Start when the text Press Start, then speak after tone is displayed: the phone sounds a

starting tone and Please speak now is displayed.

6. Hold the phone near to your ear and say clearly the word(s) you want to record as a voice tag after

you hear the starting tone.

7. After recording, the phone plays the recorded tag and Playing voice tag is displayed. If you do not

want to save the recording, press Stop.

8. When the voice tag has been successfully saved, Voice tag saved is displayed and a beep sounds.

The voice tag is now stored in the phone’s memory and a symbol

appears after the phone

number with the voice tag.

Note: At any given time ten phone numbers can have a voice tag attached. When the memory

becomes full, delete some of the voice tags; use the scroll keys

to find the number you

want to erase a voice tag from.

Making a call by using a voice tag

1. In the standby mode, press and hold Names to start the voice dialling: a short tone is played and

Please speak now is displayed.

2. Hold the phone in the normal position near to your ear and say the voice tag clearly.

3. The phone plays the name and then automatically dials the number of the recognised voice tag

after 1.5 seconds.

• If the text No voice tags saved is displayed after you press and hold Names, make sure that the

phone’s memory is in use.

Making a call using the HDC-9P headset

1. Press the Headset key: a short tone is played.

2. Say the voice tag clearly.

3. The phone plays the recognized tag and then automatically dials the number of the recognized

voice tag after 1.5 seconds.

Replaying a voice tag

You can replay voice tags after they have successfully been associated with a number.

1. In the standby mode, press Names to access the phone book.

2. Search for the name with the voice tag you wish to replay.

3. Press Details. Use the scroll keys

after the phone number with the voice tag.

4. Press Options. Scroll to Voice tag and press Select.

to find the desired number. The symbol

is displayed

5. Scroll to Playback and press Select. Hold the phone near to your ear to listen to the voice tag.

Changing a voice tag

1. In the standby mode, press Names to access the phone book.

2. Search for the name with the voice tag you wish to change.

3. Press Details. Use the scroll keys

to find the desired number. The symbol

is displayed

after the phone number with the voice tag.

4. Press Options. Scroll to Voice tag and press Select.

5. Scroll to Change and press Select: Press Start, then speak after tone is displayed.

6. Press Start: the phone sounds a starting tone and Please speak now is displayed.

7. Say the new voice tag clearly. The phone replays the new voice tag and confirms that the new voice

tag has been stored.

Erasing a voice tag

1. In the standby mode, press Names to access the phone book.

2. Search for the name with the voice tag you wish to erase.

3. Press Details. Use the scroll keys

to find the desired number. The symbol

is displayed

after the phone number with the voice tag.

4. Press Options. Scroll to Voice tag and press Select.

5. Scroll to Erase and press Select: Erase voice tag? is displayed.

6. Press OK to erase the voice tag.

Assigning a phone number to a speed dial key

You can set any of the number keys

to work as a speed dialling key. To do this you need to

assign a phone number to a number key.

1. Press Names and scroll to Speed dials and press Select.

2. Scroll to the desired speed dial key (2 to 9), and press Assign.

3. Press Search, and scroll to the desired name and press Select.

4. Press Select to assign the displayed number. Alternatively, if you have stored more than one

number under the name, scroll with

to the desired number and press Select.

After assigning a number to a speed dial key, you can call, view or change the number or undo the

speed dial.

Making a call by using the speed dialling keys

When a phone number is assigned to one of the speed dialling keys

(

.), you can call the phone number in either of the following two ways:

• Press the corresponding speed dialling key and press

• If you have set the menu function Speed dialling (Menu 4-3-3) to on, press and hold the

corresponding speed dialling key until the call is started.

Tip: Pressing and holding

dials your voice mailbox number.

Organising the phone book

Editing a name and number

1. Recall the name or number you want to edit and press Details. Then press Options.

2. Scroll to Edit name or Edit number and press Select.

3. Edit the name or number and press OK.

Erasing a name and number

You can remove names and phone numbers from the selected phone book one by one or all at once.

To erase a name and number

1. Recall the name and number you want to edit and press Details. Then press Options.

2. Scroll to Erase and press Select.

Note: If you have stored multiple numbers per name, the option Erase deletes the name, all the

numbers and the text types stored under it.

To erase all names and numbers

1. Press Names, scroll to Erase and press Select.

2. Scroll to Erase all and press Select.

3. Scroll to the phone book you want to erase (SIM card or Phone) and press OK.

4. Press OK when the text Are you sure? is displayed and then key in your security code and press OK.

Sending and receiving names and phone numbers

You can send or receive a person’s contact information as a business card either via IR or as an Over

The Air (OTA) message if supported by the network.

To send a business card as an OTA message, find the desired name and number from the phone book

and then use the option Send card.

To send a business card via IR, use the option Send card via IR. See also Copying via IR on page 44.

When you receive a business card, press Show. Then press Options, select Save or Discard, and press

Select.

Copying via IR

Copying a name and number from your phone

Using your phone’s infrared (IR) port, you can send phone book entries as business cards to a

compatible phone or PC which is running an appropriate application.

1. Make sure that the other phone or the PC is set up to receive data via its IR port.

2. Recall the name and phone number to be copied.

3. Press Options, scroll to Send card via IR to copy the phone number and name to another phone or

PC.

4. Press Select.

Copying a name and phone number to your phone

To copy names and phone numbers from another compatible phone.

1. Press Menu, scroll to Infrared (Menu 9) and press Select. Your phone is ready to receive data

through its IR port.

The user of the other phone can now send the name and phone number via Infrared.

2. Once the name and phone number have been copied to your phone, press Show. Then press

Options, select Save or Discard, and press Select.

Caller groups

You can set the phone to sound a specific ringing tone and show a selected graphic on the display

when you receive a call from a particular name and phone number. To do this, first include a name and

number in a caller group. Then, define a ringing tone and graphic for this group.

Note: You can set the phone to ring only upon receiving calls from names and numbers that belong to

a specific caller group by using the Alert for setting under the Profiles menu, see page Customising

Profiles on page 69.

Adding a name and phone number in a caller group

1. Press Names scroll with

to Caller groups, and press Select.

2. Scroll to the desired caller group and press Select.

3. Scroll to Members and press Select.

4. Press OK when Add name is highlighted, then scroll to the desired name and press Add.

If you have already added names and numbers to the group, press Options, scroll to Add name and

press OK. Then scroll to the desired name and press Add.

5. If you have more than one number stored under the name, scroll to the number which you want to

add to the caller group and then press OK.

Tip: You can also add a new name to a caller group by first recalling the desired name and

number from the phone book, then pressing Details, and then Options, then scrolling to

Caller groups and pressing Select, and then scrolling to the desired caller group and

pressing Select.

Setting a ringing tone and graphic for a caller group and renaming a caller group

1. Press Names, scroll to Caller groups and press Select.

2. Scroll to one of the caller groups and press Select.

3. Scroll to one of the following settings and press Select.

• Group title. To rename the caller group, key in a new name and press OK.

• Group ringing tone. To set the phone to ring a specific ringing tone for the group, scroll to the

desired tone and press OK. Default is the tone selected for the currently selected profile.

• Group graphic. To set the phone to display the group graphic, scroll to On and press OK.

The option list includes options for viewing and sending (Send graphic) the graphic as an Over The Air

(OTA) message, if supported by your network.

You can also receive a new group graphic to your phone as an OTA message. When you receive a group

graphic, press Show, then press Options, select Save or Discard and press Select. If you selected Save,

reach the desired caller group and press OK.

Removing a name and number from a caller group

1. Press Names, scroll to Caller groups and press Select.

2. Scroll to the desired caller group and press Select.

3. Scroll to Members and press Select.

4. Scroll to the name you want to remove, press Options and scroll to Remove name and press OK.

Memory status

You can check what percentage of the phone’s internal memory is in use or how many names and

numbers are stored on the SIM card’s memory and how much memory is still free.

1. When in the standby mode, press Names.

2. Scroll with

3. Scroll with

to Options and press Select.

to Memory status and press Select. The status of the SIM card is displayed.

4. Press

to see the status of the phone’s internal memory.

5. Using the Menu

The phone offers you an extensive range of functions which are grouped in menus and submenus. The

menus and submenus can be accessed by scrolling with

or by using the appropriate shortcut

number. The header line on top of the display helps you to locate where you are in the menu.

Most of the menu functions are provided with a brief help text. To view the help text, scroll to the

desired menu function and wait for 15 seconds. To exit the help text, press Back.

✁ Accessing a menu function by scrolling

1. To access the menu facility, press Menu. Press

to reach the desired main menu, e.g.

Settings. Press Select to enter the menu.

2. If the menu contains any submenus, find the one you want by scrolling with

. Press Select

to enter the submenu (e.g. Call settings).

3. If the menu you have selected contains submenus, repeat step 2. Press Select to enter the next

submenu (e.g. Anykey answer).

4. Press

to find the setting of your choice and confirm the chosen setting.

Tip: To return to the previous menu level, press Back. To exit the menu without changing

any settings and to return to the standby mode, press

✁ Accessing a menu function by using its shortcut number

The menu items (menus, submenus and setting options) are numbered and can be accessed quickly by

using their shortcut number. For menu shortcuts, see the list of menu functions.

1. Press Menu.

2. Key in quickly, within two seconds, the index number of the menu function you want to access. For

example, to set the Anykey function to on: Press Menu,

and

• Menu for entering the menu

•

for Settings

for Call settings

for Anykey answer

✁ List of menu functions

1. Messages

1. Write message

2. Inbox

2. All calls’ duration

3. Received calls’ duration

4. Dialled calls’ duration

5. Clear timers

6. Call costs

1. Last call units

2. All calls’ units

3. Outbox

4. Archive

5. Templates

6. My folders

7. Erase all

8. Message settings

1. Message centre number

2. Messages sent as

3. Message validity

4. Default recipient number

5. Delivery reports

3. Profiles

1. General

1. Activate

2. Personalise

1. Incoming call alert

2. Ringing tone

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Keypad tones

7. Warning tones

8. Alert for

6. Reply to you via same centre

7. Message profiles

2. Call register

1. Missed calls

2. Silent

1. Activate

2. Personalise (same submenus as in

General)

2. Received calls

3. Dialled numbers

4. Erase recent call lists

3. Rename

5. Call duration

1. Last call duration

3. Meeting (same submenus as in Silent)

4. Outdoor (same submenus as in Silent)

5. Pager (same submenus as in Silent)

3. Welcome note

4. Network selection

5. Confirm SIM service

actions

5. Communication settings

1. Info service

2. Listen to voice messages

3. Voice mailbox number

4. Service command editor

6. Security settings

1. PIN code request

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

6. Change of access codes

1. Change security code

2. Change PIN code

3. Change PIN2 code

4. Change barring password

6. Handsfree¹(same submenus as in General

plus Automatic Answer and Lights)

7. Headset²(same submenus as in General

plus Automatic Answer.)

4. Settings

1. Alarm clock

2. Clock

3. Call settings

1. Anykey answer

2. Automatic redial

3. Speed dialling

4. Call waiting service

5. Line for outgoing calls

6. Summary after call³

7. Fax or data call

8. Own number sending

4. Phone settings

1. Language

7. Restore factory settings

2. Cell info display

1. This profile is shown only if the phone is or has been used with the CARK-91 car kit.

2. This profile is shown only if the phone is or has been used with the HDC-9P headset.

3. If your SIM card does not support the Line for outgoing calls function, Summary after call is menu 4-2-5.

5. Call divert

6. Games

1. Divert all voice calls

2. Divert if busy

7. Calculator

8. Calendar

9. Infrared

3. Divert if not answered

4. Divert if out of reach

5. Divert if not available

6. Divert all fax calls

7. Divert all data calls

8. Cancel all diverts

10.Services

11.SIM services¹

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM card.

6. Menu functions

✁ Messages (Menu 1)

Within the Messages menu you can read, write and send text and picture

messages or save your own messages in the folders for later use.

Note: Before you can send any text or picture messages, you need to store your message centre

number with the Message centre number option under Message settings of this Messages menu.

Contact your service provider for the message centre number.

Writing and sending text messages

Within the Write message menu you can write and edit text messages of up to 160 characters. You

have two methods of writing messages:

• the method used traditionally in mobile phones, indicated by

• another called “predictive text input”, indicated by

, and

1. When in the standby mode, press Menu, press Select when Messages is displayed.

2. Press Select when Write message is displayed.

3. Key in a message.

Tip: When writing a text message, the phone uses the text case, which automatically

writes the first character of a sentence in upper case.

For inserting templates, see Standard answers and templates on page 57 and for inserting pictures

in your message, see Inserting pictures, 57.

You can use the traditional text input, described in Storing names and numbers on page 34.

Alternatively, use the predictive text input. See Predictive text input on page 54.

4. To send the message, press Options.

5. Press Select when Send is highlighted.

The option list includes options for sending, saving and erasing the message you are writing.

6. Enter the recipient’s phone number, or recall the phone number from the phone book by pressing

Search. Find the desired number and press OK.

7. Press OK to send the message.

Predictive text input

Predictive text input allows you to key in any characters by single keypresses. This text input is based

on a built-in dictionary to which you can add new words.

Selecting language for predictive text input

1. When in the standby mode, press Menu, press Select when Messages is displayed.

2. Press Select when Write message is displayed.

3. Press Options and scroll to Dictionary and press Select.

Note: Predictive text input is only available for the languages listed in the dictionary option list.

4. Scroll to the desired language and press Select. T9 dictionary activated is displayed and the

predictive text input is now on, indicated by

You can change from the predictive text input to the traditional text input by pressing Options

(when in Write message menu) and scrolling to Dictionary. Scroll to Dictionary off and press

Select. T9 dictionary deactivated is displayed.

Tip: Press and hold Options to quickly activate or de-activate the predictive text input.

Writing words with predictive text input

1. Start writing a word by using the keys

. Press each key only once for one letter.

For example, to write Nokia when the English dictionary is selected, press:

(for n)

(for o)

(for k)

(for i)

(for a)

The word changes after each keystroke - do not pay attention to how the word appears on the

display before you have keyed in all its characters.

• To delete a character, press Clear.

• To change the character case, press

• To change between letter and number mode, press and hold

• To insert a word, press Options. Scroll to Insert word and press Select. Write the word and press

Save.

• To insert a single number in character mode, press and hold the respective number key.

• To insert several numbers, press Options. Scroll to Insert number and press Select. Key in the

desired numbers and press OK.

• To insert a symbol, press and hold

. Select the desired symbol and press Use.

Alternatively, press Options, scroll to Insert symbol, and press Select. Scroll to the desired

symbol and press Use.

2. When you have finished writing the word and it is correct , confirm it by pressing

space with

or adding a

3. If the word is correct, start writing the next word.

If the word is not correct, you have the following options:

• Press

repeatedly until the desired word appears and confirm it.

• Press Options, scroll to Next match and press Select.

If the ? character is displayed after the word, the word you intended to write is not in the dictionary.

To add the word to the dictionary, press Spell.

Adding the desired word to the match list

1. If no matches are found in the predictive text input mode, you can insert a new word into the

dictionary. Press Spell and key in the desired word in traditional text input mode.

2. Press Save to save the word.

Note: When the dictionary becomes full, the new word replaces the oldest added one.

Writing compound words

1. Key in the first part of the word and accept it by pressing

2. Write the last part of the compound word and accept the word by pressing

Standard answers and templates

Your phone offers you a list of standard answers and templates which you can use in replying to

messages. You can also use templates when writing messages.

You can find the list of default templates in the Templates folder of the Messages menu. You can edit

the text message templates to your liking, but the original templates will be restored when the Menu

4-7 is selected (Restore Factory Settings).

To insert a template:

1. When in the Write message menu, press Options.

2. Scroll to Insert template and press Select.

3. Scroll to the desired template and press Select.

The icon is displayed in front of text message templates. The

picture message templates.

icon is displayed in front of

Inserting pictures

Your phone offers you 10 picture message templates. You can also save new pictures into the

Templates folder. More pictures can be found on the Nokia website (http://www.club.nokia.com).

Note: This function can be used only if it is supported by your network operator or service provider.

Only phones that offer picture messages feature can receive and display picture message.

To insert a picture in a text message:

1. When in the Write message menu, press Options.

2. Scroll to Attach picture and press Select. The list of picture message templates is displayed.

3. Scroll with

to the desired picture message template and press Select to view it.

Note: picture templates have default titles but you can change them by selecting the option

Rename and keying in the new title.

4. To insert the picture into your message, press Use. When the picture has been attached to your

message, the text Picture attached is displayed and the phone returns to the Write message menu.

The indicator means that the picture has been attached. The number of characters that you can

enter in a picture message depends on the size of the picture.

5. If you want to see the text and the picture together before sending the message, press Options,

scroll to Preview and press Select.

If you want to change the attached picture, select the option Replace picture. If you want to

remove the attached picture, select the option Remove picture.

6. To send the message, press Options and select the option Send.

• Note that each picture message is made up of several text messages. Therefore, sending one picture

message may cost more than sending one text message.

• Since picture messages are saved in the phone’s memory, you cannot view them if you use the SIM

card with another phone.

Reading and viewing text and picture messages

When you have received a text or picture message, the

indicator and the number of new

messages followed by Message(s) received will appear on the display.

1. Press Show to view the message or press Exit to view it later.

To read the text message later:

Once in the Messages menu, scroll to Inbox and press Open. Scroll to the desired message and

press Select to read it. An unread text message is indicated by the

icon in front of it. The

message is stored in the Inbox folder after you have read it.

To view the picture message later:

Once in the Messages menu, scroll to Inbox and press Open. Scroll to the desired message and

press Select to view it. An unviewed picture message is indicated by the icon in front of it.

2. While reading and viewing the message, press Options to scroll through the list of options and

press Select at the highlighted option to select it.

The option list includes options for erasing, replying, forwarding, moving, editing, and renaming the

message you are reading. You can also change the font size of the message you are reading.

• Note that when you are replying to a picture message, only the text is copied to your reply

message. When you are editing a picture message, only the text can be edited, not the picture.

• If you want to save the picture for later use select the option Save picture: the picture is saved

in the Templates folder.

You can also copy the message to your phone’s calendar as a reminder note (Copy to cal.). The

Details option shows you, e.g., the sender’s name and phone number, message centre used for

sending, reception date and time. If you want to extract numbers from the current message, use the

option Use number.

Replying to a message

1. Once in a message you want to reply to, press Options, scroll to Reply or to Reply (text) if you are

replying to a picture message, and press Select.

2. Scroll to one of the following reply types and press Select.

• Empty screen. Original message is not included in the reply message.

• Orig. message. Original message is included in the reply message.

• Standard answers, e.g. Yes, Thank you or Congratulations. Only the selected standard answer is

included in the reply message. The standard answer can also be modified and additional text can

be added.

• Template. The selected template is included in the beginning of the reply message. The template

text can be modified and additional text can be added.

3. If you selected Template, the list of templates, including e.g. Please call or See you in, is displayed.

Scroll to the desired template and press Select.

4. Write your reply message and press Options, scroll to Send and press Select. Press OK to send the

message to the displayed number.

Special sending options

Sending a message to multiple recipients

You can send a message to multiple recipients. When sending a reply message, use the Multiple copies

option under Forw. Options, and when writing and sending a message, use Multiple copies under Send

Options.

1. After you have written the message, press Options, scroll to Send options and press Select.

2. Scroll to Multiple copies and press Select: the list of names is displayed.

3. Scroll to the desired name and press OK to send the message.

4. Then select the next recipient and press OK.

5. When you have sent the message to everyone you want to send it to, press Done.

Sending a message by message profile

You can send or forward a message, for example to a fax number, by using the Message profile option

under Send Options or under Forw. Options if supported by your network.

For example, in order to send a message to a fax, you first need to define one message profile under the

message settings for fax transmissions. See Message settings on page 63.

1. After you have written the message, press Options and scroll to select Send options and press

Select.

2. Scroll to Message profile and press Select.

3. Scroll to the message profile you have defined for fax transmissions and press Select.

4. Enter the fax number or recall it from the phone book and press OK.

Tip: If you have stored the fax number under the Default recipient number setting of the

selected message profile, the phone automatically suggest that number. Press OK to accept

the number.

Organising your messages

All the messages stored in your phone’s message memory are organized in folders.

Inbox and Outbox folders

After you have read an incoming text or picture message, the phone stores the message in the Inbox

folder of the Messages menu.

When you save a message you have written and/or sent, the phone stores the message in the Outbox

folder.

Note: The blinking

icon indicates that the message memory is full. Before you can receive or send

new messages, delete some of your old messages.

Archive folder and user-specified folders

If you want to make sure that certain messages will not be overwritten when the message memory

becomes full, or if you want to further organise your messages, you can move some of your messages

to the Archive folder or you can add new folders under the Messages menu and store some of your

messages there.

Adding a folder:

1. Once in the Messages menu, scroll to My folders and press Open.

2. Press Options and scroll to Add folder and press Select. Enter the name of the new folder and press

OK.

Deleting the contents of a single folder or of all the folders:

1. Once in the Messages menu, scroll to Erase all and press Select.

2. Do either of the following:

Scroll to the folder whose contents you want to delete and press OK. Then press OK at the prompt

Erase all read messages from folder?

Scroll to All read and press OK to erase all read messages from all the folders. Then press OK at the

prompt Erase all read messages from folder?

Deleting a folder:

1. Once in the Messages menu, scroll to My folders and press Open.

2. Scroll to the folder you want to delete and press Options.

3. Scroll to Remove folder and press Select.

Note: When you delete a folder, all the messages contained in that folder will also be deleted.

Moving or erasing a text or picture message:

1. Once in the desired message, press Options.

2. Scroll to Move or to Erase and press Select.

3. If you want to move a message, scroll to the selected folder name and press OK.

Message settings

To access the message settings list:

1. Once in the Messages menu, scroll to Message settings and press Select.

2. Scroll to the setting you want to set and press Select.

There are two kinds of message settings in your phone, message profile specific settings and settings

common to all messages.

A message profile is a group of settings needed for sending messages. The phone uses the settings

Message centre number, Messages sent as and Message validity under the Message settings menu

as a default message profile if you do not select another set when sending a message.

When you, for example, reply to a message and select Send or when you write a message and select

Send, the phone automatically uses the default message profile.

You can also send a message to a fax or to an e-mail address (if supported by your service provider) if

you have defined a message profile with the proper settings for fax or e-mail transmissions. See also

Special sending options on page 61.

Settings common to all messages

The following message settings under the Message settings menu are common to all outgoing

messages, irrespective of the selected set.

• Delivery reports. You can request the network to send delivery reports on your messages (network

service). A delivery report is indicated by an in front of the message header.

•

Reply to you via same centre. This network service allows the recipient of your message to send

you a reply message via your message centre.

Message profiles¹

Within the Message profiles submenu of the Message Settings you can change the settings of a

particular message profile². Each of the message profiles has its own submenu with the following

functions:

• Message centre number. With this submenu you can store the phone number of the message

centre needed for sending messages.

• Messages sent as. For normal messages, select the option Text, for fax transmission, select the

option Fax, etc. Note that you can only use the options Fax, E-mail and Paging, if your messaging

service offers the facility to convert the messages into these alternative formats. Contact your

service provider for availability of this function.

• Message validity. This network service allows you to set the length of time that your messages are

stored at the message centre while attempts are made to deliver them.

• Default recipient number. The phone will suggest the number stored under this option as a default

number for message sending when this message profile is selected.

• Message profile name. Allows you to rename each message profile.

✁ Call register (Menu 2)

Within this menu you can view and delete phone numbers registered by the

phone, and view the approximate length and cost of your calls (network service).

In the options of the missed calls, received calls or dialled numbers you can:

1. The message profiles menu is only displayed if your SIM card supports more than one set. Each set appears in its own

submenu and may have any name.

2. The number of sets depends on how many sets your SIM card offers.

• call the number

• save the number in the phone book

• view the date and time of the call

• view, edit or erase the number from the list.

Note: The phone registers missed and received calls only if the network supports Calling Line

Identification (CLI), the phone is switched on and within the network’s service area.

Missed calls (Menu 2-1)

This function allows you to view a list of the last ten phone numbers from which somebody has tried to

call you with no success (network service).

Tip: When a note about missed calls is being displayed, press List to access the list of

missed calls. To call back immediately, press

Received calls (Menu 2-2)

This function allows you to view a list of the ten phone numbers from which you have most recently

accepted calls (network service).

Dialled numbers (Menu 2-3)

Within this submenu you can view the ten phone numbers that you have most recently called or

attempted to call.

Tip: To quickly access the list of last dialled numbers, press

once when the phone is in

the standby mode.

Erase recent call lists (Menu 2-4)

This menu allows you to erase all the phone numbers listed in the Missed calls, Received calls and

Dialled numbers submenus. Note that you cannot undo the operation.

These phone numbers are also erased in the following cases:

• When you switch on the phone with a SIM card inserted which is not one of the five SIM cards used

most recently with the phone.

• When you change the ‘Security level’ setting (Menu 4-6-5).

Call duration (Menu 2-5)

This function allows you to view the duration of your incoming and outgoing calls in hours, minutes

and seconds. You can also clear the call timers by using the Clear timers function (Menu 2-5-5). To

clear the timers, you need the security code. See Access codes on page 99.

Note: The actual time invoiced for calls by your service provider may vary, depending upon

network features, rounding-off for billing, and so forth.

Call costs (Menu 2-6)

This network service allows you to check the cost of your last call or all calls. The call costs are shown

separately for each SIM card. You can limit the cost of your calls to a certain amount of charging units

or units of currency by using the option Call cost limit. You can make and receive charged calls as long

as the specified cost limit is not exceeded. The number of remaining units is shown in the standby

mode. You may need the PIN2 code to set the cost limit. You can set the phone to show the remaining

talk time (cost limit) in terms of charging units or units of currency by using the option Show cost. You

may need the PIN2 code to select the currency or unit. Contact your service provider for charging unit

prices. The optionClear counters allows you to reset the call cost counters. To clear the counters you

need the PIN2 code. See Access codes on page 99.

Note: When no more charging or currency units are left, only calls to the emergency

number 112 may be possible.

The actual time invoiced for calls by your service provider may vary, depending upon

network features, rounding-off for billing, and so forth.

✁ Profiles (Menu 3)

Within the Profiles menu, you can adjust and customise the phone tones for

different events, environments and caller groups.

Activating a user profile

If you want to change the currently selected profile (General as default), press the

the standby mode). Then scroll with or to the profile you want to activate and press OK.

Tip: Press the key quickly (in the standby mode). Then press the key corresponding to

the number of the profile and wait for three seconds. For example, to activate the Silent

profile, first press the key quickly and then press

key quickly (in

Customising Profiles

1. Press Menu, scroll to Profiles and press Select. The following list of options appears: General,

Silent, Meeting, Outdoor, Pager, Handsfree, Headset.

Note: Handsfree and Headset will not appear in the Profiles list unless the CARK-91 car kit or the

HDC-9P headset are connected to your phone. However, the settings for the Handsfree and

Headset will remain in the menu once connected.

2. Scroll to the desired profile and press Options.

3. Select Personalise and press OK.

Note: Selecting Activate only makes the selected profile the current one, the profile cannot be

customised in this way.

When the phone is connected to the CARK-91car kit or the

HDC-9P headset, the Activate function will not be available.

4. Scroll to the setting you wan to customise and press Select.

5. Scroll to the desired option and press OK.

Settings you can personalise

Once you have selected the Personalise option, you can customise the following settings of the

selected profile:

• Incoming call alert to define how the phone notifies you of an incoming voice call. The options are:

Ringing, Ascending, Ring once, Beep Once and Off.

When Incoming call alert is set to Off, no ringing tone or other alert tones will be heard. This silent

mode is indicated by

• Ringing tone to set the ringing tone type for voice calls.

Tip: If you receive a ringing tone via IR or OTA, you can store five ringing tones at a time in

the ringing tone list. If you receive a ringing tone via IR or OTA, and there is no space for the

ringing tone in the ringing tone list, you can replace one of the tones in the ringing list with

the new ringing tone.

• Ringing volume to set the volume level for the ringing and message alert tones.

• Vibrating alert to set the phone to vibrate at an incoming voice call and at an incoming message.

The vibrating alert does not work when the phone is connected to a charger or desktop stand.

• Message alert tone to set the ringing tone type for messages.

• Keypad tones to set the volume level for keypad tones or to set the keypad tones off.

• Warning tones to set the warning tones on or off. For example, when set to on, the phone sounds a

warning tone when the battery is running out of power.

• Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected

caller group. Use the scroll keys

to reach the desired group and press Mark.

To set a ringing tone and a group graphic for a caller group, see Setting a ringing tone and graphic

for a caller group and renaming a caller group on page 46.

• Automatic answer (in Handsfree and Headset profiles only) to set the phone to answer an

incoming voice call after a few seconds.

Note: This function can only be used when your phone is connected to a headset or to a car kit

equipped with the ignition sense option, with the ignition switched on.

• Lights (in Handsfree profile only) to set the display and keypad lights to On or Automatic.

Renaming profiles

You can rename the profiles to your personal liking except for the General, Handsfree and Headset

profiles.

1. Press Menu, scroll with

to Profiles and press Select.

2. Scroll to the profile you want to rename and press Options, then scroll to Rename and press OK.

3. Enter the new name and press OK. To enter letters, see Storing names and numbers on page 34.

✁ Settings (Menu 4)

Alarm clock (Menu 4-1)

You can set the phone to alarm at a specified time within the Alarm clock menu (menu 4-1). To access

this submenu, press Menu (when in the standby mode) then scroll to Settings and press Select.

The alarm clock uses the time format set for the clock: 12-hour or

24-hour format. In the standby mode, the

indicator in the header line shows that the alarm is set

to On. You can switch the phone off and the alarm clock will still work.

When the alarm time expires

The phone will sound an alert tone. When the phone is alerting, Alarm! is also shown and the phone’s

lights flash.

Press Stop to stop the alarm. If you let the phone alarm for a minute or press Snooze, the alarm stops

for a few minutes and then resumes.

Note: If the alarm time expires while the phone is switched off, the phone starts alarming. If you press

Stop, the phone asks if you want to activate the phone for calls. Press Yes to register or No to keep the

phone switched off.

Note: Do not switch on the phone when wireless phone use is prohibited or when it may

cause interference or danger.

Clock (Menu 4-2)

The phone is provided with a clock. When the phone is set to show the clock, the current time is shown

in the top right of the display when the phone is in the standby mode.

In this menu you can set the time display to On or Off, set the time or select between the 12 -hour or

24 -hour time formats.

Setting the clock:

1. Once in Menu 4-2, press Select.

2. Scroll to Set the time, and press Select.

3. Enter the present time and press OK.

The clock also serves the following functions: Messages (Menu 1), Call register (Menu 2), Alarm clock

(Menu 4-1), and Calendar (Menu 8).

Note: If the battery is removed from the phone for a long time, you may need to set the time again.

Call settings (Menu 4-3)

Anykey answer (Menu 4-3-1)

When this function is set to On, you can answer an incoming call by pressing any key briefly,

except

and

Automatic redial (Menu 4-3-2)

When this function is set to On, your phone will make as many as ten attempts to connect the call

after an unsuccessful call attempt.

Speed dialling (Menu 4-3-3)

When this function is set to On, the names and phone numbers assigned to the speed dial keys

can be dialled by pressing and holding the corresponding number key. Note that pressing and

holding the

key dials your voice mailbox number.

Call waiting service (Menu 4-3-4)

When this network service is activated, the network will notify you of a new incoming call while you

have a call in progress. See Call waiting on page 30.

Line for outgoing calls (Menu 4-3-5)

The SIM card may be used with two subscriber numbers, i.e. two phone lines. However, this is a

network service and the function is available if your SIM card supports it. For more information on

availability, please contact your network operator or service provider.

Within the menu 4-3-5, you can select the desired line for making calls. However, calls on both lines

can be answered regardless of the selected line.

If you select line 2 and have not subscribed to this network service, you will not be able to make calls.

You can prevent this menu function from being used by selecting the option Lock from the option list.

You can get back to phone line 1 by pressing and holding

when in the standby mode.

Summary after call (Menu 4-3-6)

When you set this function to On, the phone will briefly display the duration and cost (network service)

of the last call.

Fax or data call (Menu 4-3-7)

Within this menu, you can make a fax or data call. Before using this function you need to activate the

IR port of your phone within Menu 9 or to connect your phone to a compatible device (for example, a

fax machine).

Own number sending (Menu 4-3-8)

This network service allows you to set your phone number either to be displayed or hidden from the

person you are calling. Set by network resets the phone to the default setting, On or Off, that you have

agreed upon with your service provider.

Note: The numbering of the Summary after call, Fax or data call and Own number sending menus

varies. If your SIM card does not support the Line for outgoing calls function, Summary after call is

menu 4-3-5, Fax or data call menu 4-3-6 and Own number sending 4-3-7.

Phone settings (Menu 4-4)

Language (Menu 4-4-1)

Within this menu you can select the language in which the display texts are shown. If the setting

Automatic is selected, the language used is chosen based on the current SIM card.

Language setting also affects the time and date formats of the following functions: Alarm clock (Menu

4-1), Clock (Menu 4-2), Calendar (Menu 8).

Cell info display (Menu 4-4-2)

This network service allows you to set the phone to indicate when it is used in a cellular network based

on Micro Cellular Network (MCN) technology (network service).

Welcome note (Menu 4-4-3)

This menu allows you to write a message (up to 44 characters in length) that is shown briefly when the

phone is switched on.

Network selection (Menu 4-4-4)

The network to which you are connected can be selected either automatically or manually.

In Automatic mode the phone automatically selects one of the cellular networks available in your

area.

In Manual mode the phone will show a list of the available networks and you can select the network

you wish to use if this network has a roaming agreement with your home network operator. If no such

agreement is in force, the text No access will be displayed and you must select another network. The

phone will stay in manual mode until the automatic mode is selected or another SIM card is inserted

into the phone.

Confirm SIM service actions (Menu 4-4-5)

See SIM services (Menu 11) on page 94.

Communication settings (Menu 4-5)

Info service (Menu 4-5-1)

This network service allows you to receive messages on various topics (such as weather or traffic

conditions) from your service provider. For available topics and relevant topic numbers, contact your

service provider.

By setting this menu to On, you will receive messages on the active topics. You can edit the list of

topics, and mark a topic active or inactive.

Topic Index retrieves a list of available topics from the network. By selecting Topics, you can add a

topic in the topics list. Key in the topic number and name. You can also edit or erase the topic list.

Select Language to set the language for the messages. Only messages in the selected language are

shown.

Tip: You can save info service messages in the Archive folder or in one of the user-specified

folders.

Listen to voice messages (Menu 4-5-2)

When you enter this submenu, the phone automatically calls your voice mailbox at the phone number

stored within Menu 4-5-3. Note that the voice mailbox is a network service and you may need to

subscribe to it first.

Tip: To call your voice mailbox quickly, press and hold

when in the standby mode.

When the display text above the left selection key is Listen, press the key to call your voice

mailbox number.

Voice mailbox number (Menu 4-5-3)

Within this submenu, you can store and edit your voice mailbox number. Voice mailbox is a network

service. For more information and for the voice mailbox number, contact your service provider.

Service command editor (Menu 4-5-4)

From this submenu you can send service requests (also known as USSD commands), for example

activation commands of network services, to your service provider. For more information, contact your

service provider.

Security settings (Menu 4-6)

Your phone is equipped with a versatile security system to prevent unauthorised use of the phone or

the SIM card. See also Access codes on page 99.

PIN code request (Menu 4-6-1)

You can protect your SIM card by setting the phone to ask for your PIN code every time the phone is

switched on. To do this, you need to set the menu PIN code request to On. You will need the PIN code

to turn this request function on. The PIN code is usually supplied with the SIM card. If not, contact your

service provider. You can change your PIN code in the Change of access codes menu (4-6-6).

Note: If you enter an incorrect PIN code three times in succession, the SIM card is blocked and you

need to enter the PUK code to unblock the SIM card. See Access codes on page 99.

Note: Some SIM cards do not allow the PIN code request to be turned off.

Call barring service (Menu 4-6-2)

This network service allows you to restrict incoming calls to and outgoing calls from your phone. A

barring password is required for using this function.

You can select one of the following call restrictions:

• Outgoing calls to bar all outgoing calls.

• International calls to bar all calls to abroad when in the home country.

• International calls except to home country to bar all international calls except to calls to the

home country when abroad.

• Incoming calls to bar all incoming calls.

• Incoming calls when abroad to bar all incoming calls when abroad.

For each of the above settings you can select Activate, Cancel or Check status (to show barred call

types).

Within the submenu Cancel all barrings you can cancel all call restrictions.

Note: When calls are barred, calls may be possible to certain emergency numbers in some

networks (e.g. 112 or other official emergency number).

Fixed dialling (Menu 4-6-3)

This service restricts your outgoing calls to selected phone numbers, if this function is supported by

your SIM card. To save and edit the numbers on the list, you will need to have the PIN2 code.

Note: When Fixed Dial Option is set on, calls may be possible to certain emergency

numbers in some networks (e.g. 112 or other official emergency number).

Closed user group (Menu 4-6-4)

This network service specifies the group of people whom you can call and who can call you. Network

default resets the phone to use a user group the SIM card owner has agreed upon with the service

provider. A closed user group is indicated by the

operator or service provider.

icon. For more information contact your network

Note: When calls are limited to Closed User Groups, calls may be possible to certain

emergency numbers in some networks (e.g. 112 or other official emergency number).

Security level (Menu 4-6-5)

You can protect your phone against unauthorised use with the security code (security code). To do this,

you need to set the menu function Security level to Phone or Memory.

• When set to Phone, the phone will ask for the security code whenever a SIM card is inserted into

the phone that is not one of the five SIM cards used most recently with the phone.

• When set to Memory, the security code is required to enter the phone’s internal phone book.

The security code is also required for using some functions, for example, to clear the phone book or to

restore the factory settings.

The factory setting for the security code is 12345. Change the code within the menu 4-6-6 Change of

access codes. Keep the new code secret and in a safe place which is separate from the phone.

Note: If you enter an incorrect security code five times in succession, the phone is blocked and will not

accept the correct security code for the next five minutes.

Note: When you change the security level, all the recent calls lists are cleared.

Change of access codes (Menu 4-6-6)

With this menu you can change the access codes: security code, PIN code, PIN2 code and barring

password. These codes can only include the characters 0 to 9. The phone prompts you to enter the

current code and the new code. It also prompts you to verify the new code by entering it again.

Note: Avoid using access codes similar to the emergency numbers, such as 112, to prevent

accidental dialling of the emergency number.

Restore factory settings (Menu 4-7)

You can reset some of the menu settings to their original values. The security code is needed for this

function.

✁ Call divert (Menu 5)

This network service allows you to direct your incoming calls to another number

(for example, to your voice mailbox number). For details, contact your service

provider.

Within Menu 5 you can select one of the following diverts:

• Divert all voice calls. All voice calls are diverted and no ringing tone is played at an incoming call.

• Divert if busy. Voice calls are diverted when your number is busy.

Tip: If Divert if busy is activated, rejecting an incoming call will also divert the call.

• Divert if not answered. Voice calls are diverted when you don’t answer a call within the preset

timeout.

• Divert if out of reach. Voice calls are diverted when your phone is switched off or outside of the

network service area.

• Divert if not available. Voice calls are diverted when your number is busy, when you don’t answer a

call, and when your phone is switched off or outside of the network service area.

• Divert all fax calls. All fax calls are diverted.

• Divert all data calls. All data calls are diverted.

Select the option Activate to set the divert setting on if allowed by the network, Cancel to set the

divert setting off or Check status to check whether the divert is activated or not.

To cancel all diverts, select the submenu Cancel all diverts.

Tip: The

voice calls. If you have two phone lines, the divert icon for your first line is

second line is

icon is shown in the standby mode when you have activated the Divert all

and for the

✁ Games (Menu 6)

Your phone offers you three games to play: Snake II, Pairs II and Opposite.

Note: Your phone must be switched on to use this function. Do not

switch on the phone when the use of a wireless phone is prohibited or when it may cause

interference or danger.

To start a new game

1. Press Menu, scroll to Games and press Select.

2. In Pairs II and Opposite, select the option New game. In Snake II select the 1 player option.

To start a 2-player game

You can also play Snake II as a 2-player game via the IR port of your phone with a person who has the

same game on a compatible phone. Before starting the 2-player game, ensure that the IR ports of the

two phones are pointing at each other. See Infrared (Menu 9) on page 87.

To start the game both players should select the option 2 players.

Game options

• New game starts a new game session.

• Level allows you to set the level of difficulty for the selected game. Select the desired level with

and press OK.

• Instructions shows a help text on how to play the game. Scroll through the text with

• Top score shows the highest score.

• Continue allows you to resume a paused game.

• Last view shows the final view of the game immediately after the game ended.

• Settings allows you to set the lights and sounds on or off for a game.

✁ Calculator (Menu 7)

The calculator in your phone adds, subtracts, multiplies, divides, and converts

currency values. This calculator has a limited accuracy and rounding errors may

occur, especially in long divisions.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

Using the calculator

1. Press Menu, scroll to Calculator, and press Select.

2. When ‘0’ is displayed on the screen, enter the first number in the calculation. To change the sign,

press Options, scroll to Change sign and press Select.

To add a decimal, press

3. To add, press

To subtract, press

To multiply, press

To divide, press

once (+ will appear).

twice (- will appear).

three times (* will appear).

four times (/ will appear).

Alternatively, press Options, scroll to the desired option, and press Select.

4. Enter the second number. Repeat these steps as many times as necessary. Press Clear to erase any

mistakes.

5. For a total, press Options. Scroll to Equals and press Select.

6. To start a new calculation, first press and hold Clear.

To make a currency conversion

1. To set the exchange rate, press Options, scroll to Exchange rate and press Select.

2. Scroll to either of the displayed options and press Select. Key in the exchange rate (press

for a

decimal point) and press OK.

3. To make the conversion, key in the amount to be converted, press Options, scroll to In domestic or

In foreign and press Select.

✁ Calendar (Menu 8)

The calendar helps you to keep track of reminders, calls that you need to make,

meetings, and birthdays. The phone sounds an alarm tone when the set date for a

meeting, birthday or a call is reached.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

Calendar views

Day view

The day view shows the date and the icon(s) for each note type you have set for the day. See Adding a

calendar note on page 86.

To access the day view, press Menu, scroll to Calendar and press Select.

Note view

The note view allows you to view the details of the selected note.

To access the note view:

When in the day view, press Options, scroll to View day notes and press Select.

Week list

The week list allows you to scroll the calendar week by week.

To access the week list:

1. When in a day view, press Options.

2. Scroll to View by weeks and press Select.

Tip: In the day list and week list, you can quickly jump to a certain date by entering the

date by using the number keys. For example, if today is the 9th and you key in 3, the phone

jumps to the third day of the following month.

Options list of calendar views

The option list of calendar views includes options for making a note and for sending a note via the text

message service or via IR.

The option list for day view and note view also includes options for erasing, editing, repeating and

moving a note. For notes of type Meeting, Call and Memo, there is also an option for copying the note

to another day and for repeating the note (every day, every week, biweekly or every year).

The Settings option allows you to set the date, time, date format, time format and week format for the

calendar. The option Auto erase allows you to set the phone to delete old notes automatically after a

specified time. However, the repeat notes (for example, birthday notes) will not be deleted.

Adding a calendar note

1. Once in the Calendar menu, scroll with

to the desired date.

2. Press Options, scroll to Make a note and press Select.

3. Scroll to one of the following note types and press Select. For entering letters and numbers, see

Storing names and numbers on page 34.

• Meeting (

)

Enter the note (or search for the name in the phone book) and press OK. Then enter the time and

press OK.

• Call (

)

Enter the desired phone number (or search for it in the phone book) and press OK. Then enter the

desired name (or search for it in the phone book) and press OK. Repeat this with the time.

• Birthday (

)

Enter the person’s name and press OK, then repeat the same with the date of birth and year of birth

(optional). If you enter the year of birth, the note shows the person’s age after the name.

•

Memo (

)

Enter the note and press OK.

4. Scroll with or to the desired alarm option (except for the Memo) and press Select.

The presence of a tone alert is indicated by when you view the notes.

Tip: When you are in the day view or week list, you can quickly go to today’s day view by

pressing

When the phone alarms for a note

The phone flashes its lights, beeps, and displays the note (also when the phone is in the Silent mode).

With a Call note on the display, you can call the displayed number by pressing

. To stop the alarm

and view the note, press View; to stop the alarm without viewing the note, press Exit.

✁ Infrared (Menu 9)

In this menu you can set up your phone to receive data through its infrared (IR)

port. To use an IR connection, the device with which you want to establish a

connection must be IrDA compliant. You can send or receive data such as business cards (names and

numbers stored in the phone book) and calendar notes to or from a compatible phone or data device

(for example, a computer) via the IR port of your phone.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

To send and receive data via IR

1. Ensure that the IR ports of the sending and receiving devices are pointing at each other and that

there are no obstructions between the devices. The preferable distance between the two devices in

an infrared connection is one meter at most.

2. When receiving data via IR, activate the IR port of your phone by entering the Infrared menu (Menu

9).

3. The user of the sending phone selects the desired IR function to start data transfer.

If data transfer is not started within two minutes after the activation of the IR port, the connection is

cancelled and has to be started again.

Note: Your phone is a Class 1 Laser Product.

Checking the status of an IR connection

The status of an IR connection is indicated by

When is shown continuously, the IR connection is activated and your phone is ready to send and

receive data via its IR port.

When

is not shown, no IR connection exists.

blinks, your phone is trying to connect to the other device or a connection has been lost.

✁ Services (Menu 10)

Your phone supports services based on the Wireless Application Protocol (WAP).

The Services menu allows you to access services supported by your network, such

as news, weather reports, flight times, dictionaries, etc. Within the Services menu you can save the

addresses of such services as bookmarks and then you can use the services via the Bookmarks option.

Note that the content of each service depends on the content provider of that service. To use such a

service, follow the instructions provided by the content provider.

Before being able to use services via your phone, you need to store the required connection settings.

Your service provider may send some or all of the required settings. After saving the settings, you can

start using them or you can edit them as described below.

Your phone offers you several connection sets under which you can store the desired connection

settings. You can then use the desired connection settings by simply activating the respective

connection set.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

Storing or editing connection settings for a connection set

1. Press Menu, scroll to the Services and press Select.

2. Scroll to Settings and press Select.

3. Press Select when Connection settings is displayed.

4. Scroll to the desired connection set and press Options.

5. Scroll to Edit and press Select.

Tip: By selecting the setting Rename, you can rename the connection set name to your

personal liking.

6. If you selected Edit, store or edit the desired connection settings.

• Homepage to store the desired homepage address.

• Connection type to select Continuous or Temporary.

• Connection security to set the connection security On or Off. When the connection security is

on, the phone tries to use a secure line when a service is activated. If a secure line is not

available, the connection will not be made. If you wish to connect anyway, with a non-secure

connection, you must set the connection security to Off.

• Bearer to select SMS or Data. When SMS is selected as the bearer, the following settings are

available: Server number and Service number. When Data is selected as the bearer, the

following settings are available: Dial-up number, IP address, Authentication type, Data call

type, Data call speed, User name and Password.

Saving a homepage address

For each connection set you can store a homepage address:

1. Press Menu, scroll to the Services and press Select.

2. Scroll to Settings and press Select.

3. Press Select when Connection settings is displayed.

4. Scroll to the desired connection set and press Options, then scroll to Edit and press Select.

5. Press Select when Homepage is displayed.

6. Key in the homepage address and press OK.

Using services

Once you have stored all the required connection settings you can start using a service. For

information on the required settings, please contact your service provider.

Activating a connection set

Before starting to use a service, you need to activate the connection set for that service.

1. Press Menu, scroll to the Services and press Select.

2. Scroll to Settings and press Select.

3. Press Select when Connection settings is displayed.

4. Scroll to the desired connection set and press Options. Then scroll to Activate and press Select.

Starting to use a service

As the services that are available vary, this user guide can give you only some of the basic guidelines on

how to use services. For more detailed information on using a specific service, please contact the

service provider and follow the guide texts on your phone’s display.

1. Activate the connection set of the service, see Activating a connection set on page 91.

2. When in the standby mode, press Menu, scroll to the Services and press Select.

3. To connect to the homepage of the service, press Select when Home is highlighted.

When connected to the homepage, follow the guiding texts on the phone’s display. While you are

browsing a service, pressing Options displays the currently available option list. If you, for example,

want to extract numbers from the current service, use the option Use number.

Tip: Depending on the service, you may also use the

key for various purposes. It may

be used, e.g., to select the highlighted option.

To quit browsing

1. Press Options.

2. Scroll to Exit and press Select. Then press Yes at the prompt Quit browsing?

You can also quit browsing by pressing

Saving a service as a bookmark

1. Press Menu, scroll to the Services and press Select.

2. Scroll to Bookmarks and press Select.

3. Press Options, then press Select when Add bookmark is displayed.

4. Enter the address of the desired service and press OK. Then enter a title for the service and press

OK.

Tip: While browsing a service, you can save the service as a bookmark by first pressing

Options and then selecting Bookmarks. Then press Select: the name of the service may be

displayed. Press Options and select the option Save as bookm.

Using a service saved as a bookmark

1. Press Menu, scroll to the Services and press Select.

2. Scroll to Bookmarks and press Select.

3. Scroll to the desired bookmark and press Select to connect to the service.

Note that you can only connect to the services saved as bookmarks that use the connection settings of

the activated connection set.

Emptying the cache

The information or services you have accessed are stored in the cache of the phone. A cache is a buffer

memory which is used to store data temporarily.

Note: If you have tried to access or have accessed confidential information requiring

passwords (for example, your bank account), empty the cache of your phone prior to each

use to secure the confidentiality.

1. Press Menu, scroll to the Services and press Select.

2. Scroll to Clear the cache and press Select.

Security certificates

For using some services, you need a security certificate. After you have downloaded the required

security certificate from the Internet, you can view the certificate and then save or erase it. If you save

it, the certificate is added to the list of security certificates under the Services menu.

To view the list of security certificates:

1. Press Menu, scroll to the Services menu and press Select.

2. Scroll to Settings and press Select.

3. Scroll to Security certificate and Select.

Note: Accessing a WAP (connectionless) secure session service, the security icon

displayed in the upper left corner of the display. When the security icon is displayed, the data

transmission between the phone and the gateway (identified by the IP address in the

Connection settings) is encrypted and secure. However, the security icon does not indicate

that the data transmission between the gateway and server (place where the requested

resource is stored) is secure. It is up to the service provider to secure the data transmission

between the gateway and server.

✁ SIM services (Menu 11)

In addition to the functions available in the phone, your SIM card may provide

additional services that you can access in the menu 11. Menu 11 is shown only if

it is supported by your SIM card. The name and contents of the menu depend entirely on the services

available.

For availability, rates and information on using the SIM services, contact your SIM card vendor, e.g.

your network operator, service provider or other third-party vendor.

You can set the phone to show you the confirmation messages sent between your phone and the

network when you are using the SIM services by selecting the option Asked within the menu 4-4-5 (

Confirm SIM service actions).

Note: Accessing these services may involve sending a text message (SMS) or making a phone call for

which you may be charged.

7. Data and fax communications

Your phone allows you to transfer data to other devices when it is connected to a PC via an IR

connection or a serial cable.

To send and receive e-mail and faxes, connect to computers and access the Internet, you also need the

appropriate data and fax communications software installed on your computer. You can use the Nokia

6210 with a variety of commercially available data and fax communications applications.

For using your phone as a modem, you first need to install it as a modem. Detailed installation

instructions and the required system files can be found on the CD-ROM supplied with the phone or on

the Nokia website (www.club.nokia.com or www.forum.nokia.com).

✁ Connecting your phone to a computer

Installing communications applications and modem drivers

1. Ensure that a data communication application is correctly installed on your PC. For information on

how to install an application, please refer to that application’s documentation.

2. Install the necessary drivers on your PC. For convenience, use the applications provided with the

CD-ROM. For instructions, see the modem setup application provided on the CD-ROM or on the

Nokia website (www.club.nokia.com or www.forum.nokia.com).

For troubleshooting, please refer to the Readme.txt file which can be found on the CD-ROM or on

the Nokia website (www.club.nokia.com or www.forum.nokia.com).

HSCSD - High Speed Circuit Switched Data

The Nokia 6210 has a built-in high-speed GSM data communication capability that enables the use of

GSM high-speed data services. You can use high-speed functionality when your phone is connected to

a computer via an IR connection or a serial cable and when the modem drivers supporting high-speed

data software are installed on your computer and selected as an active modem. For availability of

high-speed data services and subscription to services, please contact your network operator or service

provider.

With the GSM high-speed data service you can use the Internet and other services much faster than

usual. When sending and receiving

e-mail, the 14.4 kbps data transmission speed can be doubled up to

28.8 kbps. In Internet connections a download speed of up to 43.2 kbps can be achieved if supported by

the equipment of the network operator and the Internet service provider.

Note: Sending data in HSCSD mode drains your battery faster than normal voice or data calls as the

phone is sending data faster. For continuous usage, connect the phone to a charger.

Using communications applications

Do either of the following:

If you use IR:

• Activate the IR connection of your phone by selecting Menu 9.

• Make sure that the infrared port of the phone faces the infrared port of the PC.

If you use a cable:

• Connect the DLR-3P cable to the serial port on the back of your PC.

• Connect the DLR-3P cable to your phone.

Start using the data communication application on the PC. For information on how to use the

application, please refer to that application’s documentation.

Note: Making or answering phone calls during a PC connection is not recommended as it

might disrupt the operation.

For better performance during data calls, place the phone on a stationary surface with the

keypad facing downward. Do not move the phone by holding it in your hand during a data

call.

8. Reference information

✁ Removing and replacing the Personal badge

The silver-coloured badge on the front of the phone can be replaced with a new badge with your

customised name print. Personal badges are available only through Club Nokia on the web

(www.club.Nokia.com). Availability may vary by country.

Note: Keep badges out of reach of small children.

Removing the badge

1. Press a fingernail between the bottom connector and the badge (1.).

2. Lift up the badge (2.) with your fingernail and then slide the badge off from the phone (3.).

Replacing the badge

1. Place the badge so that the edges match the corresponding place in the phone (1.)

2. Slide the badge into its place (2.).

✁ Access codes

You can use the access codes described in this section to avoid unauthorised use of your phone and

SIM card.

The access codes (except the PUK and PUK2 codes) can be changed by using Menu 4-6-6. See the

following section.

Security code (5 digits)

The security code can be used to avoid unauthorised use of your phone. The factory setting for the

security code is 12345. To avoid unauthorised use of your phone, change the code in the Settings

menu, see Security level (Menu 4-6-5) on page 79 and Change of access codes (Menu 4-6-6) on page

79. Keep the new code secret and in a safe place separate from your phone.

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. The

PIN code is usually supplied with the SIM card. When the PIN code request is enabled (Menu 4-6-1),

the code is requested each time the phone is switched on.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required to access some functions, such as charging

unit counters. These functions are only available if supported by your SIM card.

PUK code (8 digits)

The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK code may

be supplied with the SIM card. If not, contact your local service provider for the code. If you lose the

code, contact your service provider.

PUK2 code (8 digit)

The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you lose

the code, contact your service provider.

Barring password

The barring password is needed when using the ‘Call Barring’ function. You obtain the password from

your service provider.

100

✁ Battery information

Charging and discharging the battery

• Your phone is powered by a rechargeable battery.

• Note that a new battery's full performance is achieved only after two or three complete charge and

discharge cycles!

• The battery can be charged and discharged hundreds of times but it will eventually wear out. When

the operating time (talk time and stand-by time) is noticeably shorter than normal, it is time to buy

a new battery.

• Use only batteries approved by the phone manufacturer and recharge your battery only with the

chargers approved by the manufacturer.

• When a charger is not in use, disconnect it from the power source. Do not leave the battery

connected to a charger for longer than a week, since overcharging may shorten its life. If left

unused a fully charged battery will discharge itself over time.

• For good operation times, discharge the NiMH battery from time to time by leaving your phone

switched on until it turns itself off. Do not attempt to discharge the battery by any other means.

• Temperature extremes will affect the ability of your battery to charge: allow it to cool down or

warm up first.

• When the battery is running out of power and only few minutes of talk time remain, a warning tone

is heard and Battery low is briefly displayed. When no more talk time is left, Battery empty is

displayed and a warning tone is sounded and the phone switches itself off.

101

Using the batteries

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or worn out.

• Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin,

clip or pen) causes direct connection of the + and - terminals of the battery (metal strips on the

back of the battery) for example when you carry a spare battery in your pocket or purse. Short-

circuiting the terminals may damage the battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will

reduce the capacity and lifetime of the battery. Always try to keep the battery between 15 °C and

25 °C (59 F and 77 F). A phone with a hot or cold battery may temporarily not work, even when the

battery is fully charged. Battery performance is particularly limited in temperatures below freezing

point.

• Do not dispose of batteries in a fire!

Batteries must be recycled or disposed of properly.

Must not be disposed of in municipal waste!

102

Care and maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions

below will help you to fulfill any warranty obligations and to enjoy this product for many years. When using your

phone, battery, charger OR any accessory:

•

Keep it and all its parts and accessories out of small children's reach.

Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.

Do not use or store it in dusty, dirty areas. Its moving parts can be damaged.

Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and

warp or melt certain plastics.

•

Do not store it in cold areas. When the phone warms up (to its normal temperature), moisture can form inside

the phone, which may damage electronic circuit boards.

•

Do not attempt to open it. Non-expert handling of the device may damage it.

Do not drop, knock or shake it. Rough handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth slightly

dampened in a mild soap-and-water solution.

•

Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.

If the phone, battery, charger or any accessory are not working properly, take them to your nearest qualified

service facility. The personnel there will assist you, and if necessary, arrange for service.

103

Important safety information

✁ Traffic safety

Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before

conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can

break loose in a collision or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.

Remember road safety always comes first!

✁ Operating environment

Remember to follow any special regulations in force in any area and always switch off your phone whenever it is

forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal

operating position (Held to your ear.).

Do not point the infrared beam at anyone’s eye or allow it to interfere with other infrared devices.

✁ Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals from your wireless phone.

104

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 20 cm (6 inches) be maintained between a

hand-held wireless phone and a pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and recommendations of Wireless Technology

Research.

Persons with pacemaker:

•

Should always keep the phone more than 20 cm (6 inches) from their pacemaker when the phone is switched

on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize the potential for interference.

If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want

to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of

inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to

determine if they are adequately shielded from external RF energy or if you have any questions.

Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g.

electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems,

air bag systems).

105

Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer

of any equipment that has been added to your vehicle.

Posted facilities

Switch your phone off in any facility where posted notices so require.

✁ Potentially explosive atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and

instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone when at a refuelling point (service station). Users are reminded of the

need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas),

chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on

boats; chemical transfer or storage facilities; vehicles using liquified petroleum gas (such as propane or butane);

areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where

you would normally be advised to turn off your vehicle engine.

✁ Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service

may be dangerous and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its

parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects,

including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment

area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

106

Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous

to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, or legal

action or both.

✁ Emergency calls

IMPORTANT! This phone, like any wireless phone, operates using radio signals, wireless and landline

networks as well as user-programmed functions which cannot guarantee connection in all conditions.

Therefore, you should never rely solely upon any wireless phone for essential communications (e.g.

medical emergencies).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate cellular

signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network

services and/or phone features are in use. Check with local cellular service providers.

To make an emergency call:

1. If the phone is not on, switch it on.

Some networks may require that a valid SIM card is properly inserted in the phone.

2. Press

as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display.

3. Key in the emergency number for your present location (e.g. 112 or other official emergency number).

Emergency numbers vary by location.

4. Press the

key.

If certain features are in use (Keypad lock, Fixed Dialling, etc.), you may first need to turn those features off before

you can make an emergency call. Consult this document and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible.

Remember that your wireless phone may be the only means of communication at the scene of an accident - do not

cut off the call until given permission to do so.

107

Timex Clock T235 IB User Manual
Teac CD58E User Manual
Silicon Laboratories SI5369 User Manual
Seagate ST94019A User Manual
Samsung GH68 06047A User Manual
Rosewill RX82 U(JBOD) User Manual
Roberts Radio CR9945 User Manual
Roberts Radio CR966 User Manual
Oregon RM818PA User Manual
Nokia E6 00 User Manual