* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
SAMSUNG ELECTRONICS
Printed in Korea
Code No.:GH68-06047A
English. 07/2005. Rev 1.2
World Wide Web
http://www.samsungmobile.com
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Important
safety
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
precautions
Switch off the phone near all medical
equipment
Failure to comply with the following
precautions may be dangerous or illegal.
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Qualified service
Only qualified service personnel may repair your
phone.
Emergency call
For more detailed safety information, see "Health and
safety information" on page 87.
Key in the emergency number for your present
location, then press
.
1
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started.”
In this guide, the following instruction icons appear:
Special
features of your phone
Indicates that you need to pay careful attention
to the subsequent information regarding safety or
phone features.
•
MP3 player
Play MP3 music files using your
phone as an MP3 player.
Indicates that you can get more information on
the referenced page.
ꢀ
•
Bluetooth
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
→
Send photos, images, videos, and
other personal data, and connect
to other devices using free,
wireless Bluetooth technology.
Indicates a key on the phone. For example,
[
]
[
]
•
IrDA
Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu
<
>
Send and receive Phonebook and
Organiser data via an infrared port.
>
2
•
Plug-in speaker
•
•
Multimedia Message Service (MMS)
Deliver MMS messages with a combination of
text, images, video, and audio.
Use the included external speaker
to talk without having to hold the
phone.
E-mail
•
Voice clarity
Deliver e-mails with images, video, and audio
attachments.
Use the voice clarity feature to increase the
volume and clarity of an incoming call, even in the
midst of a crowd.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
•
Get Personal with photo caller
ID
See who’s calling you when their
very own photo displays.
•
Organiser
Keep track of your daily, weekly,
and monthly schedule.
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•
Voice recorder
Record memos or sounds.
3
Play games.......................................................... 16
Browse WAP........................................................ 16
Use Phonebook .................................................... 17
Send messages.................................................... 18
View messages .................................................... 19
Use Bluetooth wireless.......................................... 20
Contents
Unpack
6
6
7
Make sure you have each item
Your phone
Enter text
21
23
28
85
Buttons, features, and locations
Get started
ABC, T9, Number, and Symbol modes
Call functions
First steps to operate your phone
Advanced calling features
Menu functions
Install and charge the phone ................................... 7
Power on or off...................................................... 8
Keys and display.................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/answer calls................................................ 13
All menu options listed
Solve problems
Help and personal needs
Health and safety information
Step outside the phone
14
87
94
Begin with your camera, music, games, and other special
features
Index
Use camera......................................................... 14
Play MP3s ........................................................... 15
4
Overview of menu functions
To access Menu mode, press <Menu> from in idle mode.
1 Call records
ꢀp.28
3 Applications (continued)
6 Funbox
ꢀp.60
9 Settings
ꢀp.74
1 All calls
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p.28
p.29
p.29
p.29
p.29
p.29
p.30
7 Convertor
8 Timer
9 Stopwatch
10 SIM-AT*
ꢀ
ꢀ
ꢀ
ꢀ
p.40
p.41
p.41
p.41
Images
Videos
Music
Sounds
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p.60
p.61
p.61
p.62
p.62
1 Time & Date
2 Phone settings
3 Display settings
4 Sound settings
5 Network services
6 Connectivity
7 Security
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p.74
p.75
p.76
p.77
p.78
p.80
p.83
p.84
p.85
2 Dialled calls
3 Received calls
4 Missed calls
5 Delete all
6 Call time
Memory status
4 Browser
ꢀp.42
7 Organiser
ꢀp.62
7 Call costs*
1 Home
ꢀp.42
ꢀp.43
ꢀp.43
ꢀp.43
ꢀp.43
ꢀp.44
2 Bookmarks
3 Go to URL
4 Clear cache
5 Profile settings
6 Current proxy
1 Month view
2 Week view
3 Day view
ꢀp.63
ꢀp.65
ꢀp.65
ꢀp.65
ꢀp.65
ꢀp.66
ꢀp.66
ꢀp.66
ꢀp.66
ꢀp.67
8 Memory status
9 Reset settings
2 Phonebook
ꢀp.30
1 Contact list
2 Add new contact
3 Group
ꢀp.30
ꢀp.31
ꢀp.32
ꢀp.32
ꢀp.33
ꢀp.33
ꢀp.33
ꢀp.34
4 Schedule
* Shows only if supported by your
SIM card.
5 Anniversary
6 Miscellaneous
7 To do
8 Missed alarm events
9 Memo
4 Speed dial
5 Messages
ꢀp.45
5 My name card
6 Own number
7 Management
8 Service number*
1 Short messages
2 Multimedia messages
3 Email
4 Push messages
5 Voice mail
6 Text template
7 Broadcast messages
8 Memory status
ꢀp.45
ꢀp.48
ꢀp.53
ꢀp.59
ꢀp.59
ꢀp.59
ꢀp.60
ꢀp.60
10 Memory status
3 Applications
ꢀp.34
8 Camera
ꢀp.67
1 Java world
2 MP3 Player
3 Voice recorder
4 World time
5 Alarm
ꢀp.34
ꢀp.36
ꢀp.38
ꢀp.39
ꢀp.39
ꢀp.40
1 Take a photo
2 Record video
3 Photos
4 My photos
5 Video clips
6 My video clips
ꢀp.67
ꢀp.70
ꢀp.72
ꢀp.73
ꢀp.73
ꢀp.74
6 Calculator
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Camera
lens
Flash
Earpiece
Display
Phone
Travel Adapter
Navigation keys
(Up/Down/Left/
Right)
Headset
jack
WAP access/
Confirm key
Right soft key
Volume keys
Camera
key
Battery
User’s Manual
External
Speaker
Left soft key
Dial key
Power on/off/
Menu exit key
You can obtain various accessories from
your local Samsung dealer.
Cancel/Correct
key
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
Alphanumeric
keys
IrDA port
Special
function keys
Microphone
6
Install the battery.
Plug the travel adapter
into the phone.
Get started
First steps to operate your phone
3
4
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
1
2
5
6
When the phone is completely charged (the battery
icon stops blinking), unplug the adapter from the
power outlet.
If the phone is already
on, first turn it off by
Make sure that the gold-
coloured contacts on the
card face down into the
phone.
holding [
].
7
Get started
Remove the adapter from the phone.
Power on or off
7
Power on
1. Open the phone.
2. Press and hold
the phone.
[
]
to turn on
Do not turn on
the phone when
mobile phone
3. If necessary, enter the PIN and
press <OK
>
use is prohibited.
Power off
1. Open the phone.
2. Press and hold
Low battery indicator
[
].
When the battery is low:
•
•
•
a warning tone sounds,
Keypad lock
the battery low message displays, and
When you close the phone, the keypad lock feature
locks the exposed keys so that nothing will happen if
the keys are accidentally pressed.
the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
To unlock the keypad, press and hold the left soft key
and press <OK>.
8
Keys and display
Key(s) Description
Key(s) Description
Enter numbers, letters, and some special
characters.
Perform the function indicated on the bottom
line of the display.
In Idle mode, hold [1] down to access your
voicemail.
In Idle mode, access menu options
Enter special characters.
directly.ꢀpage 75
Hold [
]
down to activate or deactivate
In Menu mode, scroll through the menu
options.
Quiet mode.
Adjusts the phone volume.
In Idle mode, launches the Wireless
Application Protocol (WAP) browser.
In Menu mode, selects the highlighted menu
option.
In Idle mode, with the phone open, adjusts
the keypad tone volume. With the phone
closed, hold down to turn on the backlight.
In Menu mode, scrolls through the menu
options.
(on the left)
Sends or answers a call.
In Idle mode, retrieves the last number
dialled, missed, or received.
In Idle mode, hold down to turn on the
camera.
In Camera mode, takes a photo or starts
recording a video.
(on the right)
Deletes characters from the display.
In Menu mode, returns to the previous menu
level.
Ends a call. Hold down to switch the phone
on and off.
In Menu mode, cancels input and returns the
phone to Idle mode.
9
Get started
Display
Layout
New e-mail received or being sent
One of the message Inboxes is full
Call diverting feature is active
Icons
(continued)
The display has the three areas.
Icons
displays various icons.
ꢀpage 78
IrDA port is active
ꢀ
page 83
Text and graphics
displays messages,
instructions, and
Bluetooth feature is active
information you enter.
ꢀpage 80
Synchronised with a PC
GPRS network
Soft key function
Menu Contacts
indicators
shows the current
functions assigned to the
two soft keys.
Home Zone, if you have
registered for the appropriate
service
Received signal strength
Icons
Office Zone, if you have
registered for the appropriate
service
Call in progress
Out of your service area; you
cannot send or receive calls
Set to vibrate call ringer
Alarm set
ꢀpage 77
New text message
New voicemail message
New multimedia message
Quiet mode is active
ꢀpage 77
Battery power level
10
Access menu functions
Select an
option
1. Press the appropriate soft key.
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
2. Press the Navigation keys to
move to the next or previous
option.
display indicates their current role.
3. Press <Select> or [
] to
confirm the function displayed or
option highlighted.
Menu
Contacts
4. To exit, choose either of the
following methods:
•
Press <Back> or [
move up one level.
Press to return to Idle
mode.
C] to
•
[
]
Press the left soft
key to access
Menu mode.
Press the right soft
key to access
Contact list in the
Phonebook menu.
Use shortcuts Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
You can set a wallpaper for the idle
screen.
Idle mode
Wallpaper
1. In Idle mode, press <Menu
>
Display
1. In Idle mode, press <Menu
>
and select Settings
settings Language
2. Select a language.
→
Phone
language
and select Settings
settings
→
Display
.
→
.
→
Wallpaper
2. Select an image category.
1. In Idle mode, press <Menu
>
3. Press scroll keys to select an
image.
Call ringer
melody
and select Settings
settings
Ring tone
→
Sound
→
.
Incoming call
→
You can change the colour for the
display components, such as title
bars and highlight bars.
Menu mode
Skin colour
2. Press [Left] or [Right] to select
a ringer category.
1. In Idle mode, press <Menu
and select Settings Display
settings Skin
2. Select a colour pattern.
>
3. Press [Up] or [Down] to select a
ringer melody.
→
→
.
4. Press Save
.
You can switch the phone to Quite
mode to avoid disturbing other
people with your phone sounds.
Quiet mode
Press and hold
[
]
in Idle mode.
12
Make/answer calls
You can protect the phone against
unauthorised use with a phone
password.
Phone lock
1. Enter an area code and phone
Make a call
number.
1. In Idle mode, press <Menu
and select Settings
Security Change
password
2. Enter the default password,
>
2. Press [ ].
→
3. To end the call, press
[
].
→
.
1. When the phone is ringing,
press [ ].
Answer a call
“00000000” and press <OK>.
2. To end the call, press
[
].
3. Enter a new 4- to 8- digit
password and press <OK>.
Press [ / ].
4. Enter the new password again
Adjust the
volume during
a call
and press <OK>.
5. Select Phone lock
6. Select Enable
7. Enter the password and press
OK>.
.
.
<
13
Step outside the phone
Begin with your camera, music, games, and other special
features
1. In Idle mode, press and hold
] to turn on the camera.
Record a video
[
2. Press [1] to switch to Record
mode.
Use camera
3. Press [ ] to start recording.
4. Press [ ] to stop recording.
The video is saved
1. Open the phone.
Take a photo
2. In Idle mode, press and hold
automatically.
[
] to turn on the camera.
5. Press [C] to record another
3. Aim the lens at the subject and
adjust the image.
video.
4. Press [ ] to take a photo. The
photo is saved automatically.
1. In Idle mode, press [ ] and
select Video clips
Play a video
.
5. Press [C] to take another
2. Select the thumbnail image of
the video you want.
photo.
1. In Idle mode, press [ ] and
select Photos
2. Select the photo you want.
View a photo
.
14
Play MP3s
1. From the MP3 player screen,
Play MP3 music
press
[
].
Use these methods:
Copy MP3 files
to the phone
2. During playback, use the
following onscreen keys:
•
Download from the wireless
web page 42
ꢀ
•
•
•
pauses playback.
resumes.
goes back to the
•
Download from a computer
using Samsung PC Studio II
ꢀSamsung PC Studio II User’s
Guide
previous file.
skips to the next file.
changes
the repeat mode.
stops playback.
•
Receive via IrDA or Bluetooth
•
•
ꢀpage 80
/
/
Options
Back
1. In Idle mode, press <Menu
and select Applications
MP3 player
2. Press <Options> and select
Add to list Add all or Add a
file
>
•
Create a play
list
→
To select a key, press [Left] or
[Right], then press
.
[
].
To adjust the volume, use [ /
].
→
.
3. For Add a file, scroll to a file
and press <Add>. Repeat from
step 2.
15
Step outside the phone
Play games
Browse WAP
1. In Idle mode, press <Menu>
and select Applications
Java world Downloads
In Idle mode, press
[
].
Launch the
browser
Select a game
→
→
→
Forgotten Warrior or
Freekick
•
To scroll through browser items,
press [Up] or [Down].
To select an item, press <
To return to the previous page,
press <Back> or [ ].
To return to the home page,
hold down [ ].
Navigate the
web
2. Press any key once or twice to
launch the game.
•
•
>.
C
1. Press <Play>.
Play Forgotten-
Warrior
•
2. Select StartGame
.
C
1. Select Game
you want a team
2. Press
→
the game mode
Play Freekick
→
→
a player.
[
].
16
Use Phonebook
1. In Idle mode, press
Contacts>.
Find an entry
<
To the phone’s memory
Add an entry
2. Select an entry.
1. In Idle mode, enter a phone
3. Select a number and press [
]
number and press <Save>.
to dial, or <Options> to access
options.
2. Select Phone
→
a number type.
3. Specify the contact information:
Last name, First name, Mobile,
Home, Office, Fax, Other, E-
mail, Graphic ID, Alert, Group,
and Notes.
1. In Idle mode, press <Menu
and select Phonebook My
name card
>
Create and
send a name
card
→
.
2. Specify your contact
information.
4. Press
[
]
to save the entry.
To the SIM card
3. Press <Save> to save the
1. In Idle mode, enter a phone
name card.
number and press <Save>.
4. To send the name card to other
2. Select SIM
3. Enter a name.
4. Press to save the entry.
.
people, press <Options> and
select Send
→
via SMS
/MMS/
Email Bluetooth
/
/infrared.
[
]
17
Step outside the phone
Send messages
5. Add a media file.
6. Select Message
.
1. In Idle mode, press <Menu
>
Send a text
message (SMS)
and select Messages
messages Create
2. Enter the message text.
3. Press <Options> and select
→
Short
7. Enter the message text and
→
.
press
8. Press <Options> and select
Send
[
].
.
Send and save or Send only
4. Enter destination numbers.
5. Press <Options> and select
.
9. Enter destination numbers or
e-mail addresses.
10.Press <Options> and select
Send
.
Send
.
1. In Idle mode, press <Menu
>
1. In Idle mode, press <Menu
and select Messages
Multimedia messages
Create
2. Select Subject
3. Enter the message subject and
press
4. Select Picture & video or
Sound
>
Send an e-mail
Send a
and select Messages
Create
2. Select Subject
3. Enter the e-mail subject and
press
4. Select Message
5. Enter the e-mail text and press
→
Email
→
multimedia
message
(MMS)
→
.
→
.
.
.
[
].
[
].
.
.
[
].
18
When a notification appears:
6. Select File Attach
.
View a
multimedia
message
1. Press <View>.
7. Add image, video, music, or
sound files.
2. Press <Options> and select
Retrieve. The message
displays.
8. Press <Options> and select
Send
.
9. Enter e-mail addresses.
From the Inbox:
10.Press <Options> and select
1. In Idle mode, press <Menu
and select Messages
Multimedia messages
Inbox
2. Select a message.
>
Send
.
→
→
View messages
.
When a notification appears:
View a text
message
Press <View>. The message
displays.
1. In Idle mode, press <Menu
>
View an e-mail
and select Messages
Inbox
2. Select Check new mail.
→
Email
From the Inbox:
→
.
1. In Idle mode, press <Menu
>
and select Messages
messages Inbox
2. Select a message.
→
Short
3. Select an e-mail or header.
→
.
4. If you selected a header, press
<Options> and select
Retrieve
.
19
Step outside the phone
Use Bluetooth wireless
1. Access an application,
Phonebook Funbox
Camera, or Organiser
Send data
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
,
,
.
2. Select the item you want to
send.
3. Press <Options> and select
In Idle mode, press <Menu> and
Turn on
Bluetooth
Send
→
via Bluetooth.
select Settings
→
Connectivity
On
→
Bluetooth Activation
→
→
.
4. Select a device.
5. If necessary, enter the
1. In Idle mode, press <Menu>
and select Settings
Connectivity Bluetooth
My devices Search new
device
2. Select a device.
Bluetooth PIN and press <OK>.
Search for and
pair with a
Bluetooth
device
→
→
→
→
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
Receive data
.
If necessary, press <Yes> to
confirm the reception.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth PIN
code, if it has one, and press
<OK>. When the owner of the
other device enters the same
code, the pairing is complete.
20
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
Enter text
ABC, T9, Number, and Symbol modes
You can enter text for some features such as
messaging, Phonebook, or Organiser, using ABC
mode, T9 mode, Number mode, and Symbol mode.
Characters in order displayed
Key
Upper case
Lower case
1
2
3
4
5
6
7
8
9
0
.
,
-
?
!
’
@
:
1
A
D
G
J
B
C
F
I
2
3
4
5
a
d
g
j
b
e
h
k
c
f
i
2
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
E
H
K
N
Q
U
3
4
5
L
l
Press the right soft key to change the input mode.
M
P
T
O
6
m
p
t
n
o
6
Example: Writing a text message
R
V
Y
S
8
7
9
q
r
s
7
u
v
8
W X
0
Z
w
x
y
z
9
ABC mode
T9 mode
Tips for using ABC mode
Number mode
Symbol mode
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Text input mode
Options
indicator
21
Enter text
•
Press
Press
[
[
]
]
to insert a space.
3. When the word displays correctly, go to step 4.
Otherwise, press [ ] to display alternative word
choices for the keys that you have pressed.
For example, OF and ME use [ ] and [ ].
Depending on your country, the [ ] may be not
available for scrolling alternative word choice.
0
•
to change case. Lower case (No
indicator), Initial capital ( ), and Capital lock (
are available.
)
6
3
•
•
Press [Left] or [Right] to move the cursor.
0
Press [
C
] to delete characters one by one. Press
and hold [
C
] to clear the display.
4. Press
word.
[
]
to insert a space and enter the next
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Tips for using T9 mode
•
Press [
automatically.
Press to change case. Lower case (No
1] to enter periods or apostrophes
Entering a word in T9 mode
•
[
]
1. Press [
each key once for each letter.
For example, press [ ], [ ], [
enter HELLO in T9 mode.
2] to [9] to start entering a word. Press
indicator), Initial capital ( ), and Capital lock (
are available.
)
4
3
5], [5], and [6] to
•
•
Press [Left] or [Right] to move the cursor.
Press [
and hold [
C
] to delete characters one by one. Press
T9 predicts the word that you are typing, and it
may change with each key that you press.
C] to clear the display.
Adding a new word to the T9 dictionary
2. Enter the whole word before editing or deleting
characters.
This feature may not be available for some languages.
1. Enter the word that you want to add.
22
2. Press [0] to display alternative words for your key
Call functions
Advanced calling features
presses. When there are no more alternative
words, Spell displays on the bottom line.
3. Press <Spell>.
Making a call
1. In Idle mode, enter the area code and phone
number.
4. Enter the word you want using ABC mode and
press <OK>.
Using Number mode
2. Press [ ].
Number mode enables you to enter numbers.
Press [C] to clear the last digit or press and hold [C]
to clear the whole display. You can move the cursor
to edit an incorrect digit.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
Making an international call
1. In Idle mode, press and hold
appears.
[0]. The
+
character
To
Press
2. Enter the country code, area code, and phone
number, then press [ ].
display more symbols
select a symbol
[Up] or [Down].
the corresponding
number key.
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
clear the symbol(s)
insert the symbol(s)
[C].
2. Scroll to the number you want and press [ ].
<OK>.
23
Call functions
Making a call from Phonebook
Tips for answering a call
•
When Anykey answer in the Extra settings
menu is active, you can press any key to answer a
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
call, except for [ ] and <Reject>.
ꢀp. 76
Phonebook.ꢀp. 30
•
•
Press <Reject> or [ ] to reject a call.
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
Press and hold [ / ] to mute the ringer.
keys.
ꢀp. 32
Viewing missed calls
Dialling a number from the SIM card
If you have missed calls, the screen displays how
many calls you have missed.
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
1. Press <View>.
2. Press [Left] or [Right] to scroll through other
numbers.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
Using the headset
Close the phone or press [ ].
Use the headset to make or answer calls without
holding the phone.
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Connect the headset to the jack on the right side of
the phone.
Press [ ] or <Accept> to answer the call.
24
The buttons on the headset work as listed below:
Options during a call
To
Press
You can access a number of functions during a call.
redial the last call
answer a call
end a call
the button once and hold.
and hold the button.
and hold the button.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Using the external speaker
Use the external speaker that came with your phone
to talk and listen with the phone a short distance
away. First, you must plug the speaker into the phone.
Placing a call on hold/Retrieving
Press <Hold> or <Retrieve> to place the call on hold
or retrieve the call.
Making a second call
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
1. During a call, press [
] to listen and talk to the
icon appears.
the call on hold.
other person hands-free. The
5. To end the current call, press [ ].
2. Press [
The
] again to return to normal phone mode.
icon appears.
25
Call functions
Answering a second call
Using the voice clarity feature
You can answer an incoming call while already on the
phone, if your network supports it and you have
This feature removes extraneous noise and increases
call quality so that the person with whom you are
speaking can hear you clearly even if you are in a
noisy place.
activated the call waiting feature.ꢀp. 79
1. Press [ ] to answer the call. The first call is
automatically put on hold.
Press <Options> and select Voice clarity on or
Voice clarity off
.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
Switching off the microphone (Mute mode)
the call on hold.
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
4. To end the current call, press [ ].
Using a Bluetooth headset
Press <Options> and select Mute or Unmute
.
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
Muting or sending key tones
You can turn the key tones off or on.
and connect it to the phone.
Press <Options> and select Switch to headset or
Switch to phone
ꢀp. 80
Press <Options> and select Mute keys or Send
keys
.
.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
26
Using Phonebook
Using SIM services
You can access the Phonebook menu to locate or
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
store entries.ꢀp. 30
Press <Options> and select Phonebook
.
Sending a sequence of DTMF tones
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
Your service provider must support multi-party calls
for you to use this feature.
1. When connected with a teleservice system, press
Setting up a multi-party call
1. Call the first participant.
<
Options> and select Send DTMF
2. Enter the number you need to send and press
OK>.
.
2. Call the second participant. The first call is
automatically put on hold.
<
3. Press <Options> and select Join. The first
Using the message service
You can access the Messages menu to read an
incoming message and send a new message.
participant is added to the multi-party call.
4. If desired, call another person or answer an
incoming call.
ꢀp. 45
Press <Options> and select Message
.
27
5. Press <Options> and select Join
.
Menu functions
6. Repeat steps 4 and 5 as desired.
All menu options listed
Having a private conversation with one
participant
Call records (Menu 1)
1. Press <Options> and select Split
.
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
To access this menu, press <Menu> in Idle mode and
3. To return to the multi-party call, press <Options
>
select Call records
.
and select Join
.
Dropping one participant
1. Press <Options> and select Remove
All calls (Menu 1.1)
.
This menu displays the 20 most recent calls dialled,
received, or missed.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
Accessing a call record
1. Press [Left] or [Right] to select a call type.
2. Press [Up] or [Down] to scroll through the call list.
3. Close the phone or press [ ] to end the multi-
party call.
3. Press [ ] to dial a number, or [
details of a call.
] to view the
28
Using call record options
Missed calls (Menu 1.4)
While viewing the call list, press <Options> to access
the following options:
This menu displays the 20 most recently received calls
that you did not answer.
•
•
•
•
•
•
Details: view the details of the selected call.
Call back: dial the number.
Delete all (Menu 1.5)
Use this menu to delete all of the records in each call
type.
Paste: save the number in Phonebook.
Send message: send an SMS or MMS message.
Delete: delete the selected call record.
1. Press [
] to check the call type(s) to clear.
2. Press <Delete>.
Delete all: delete all dialled, received, and missed
call records.
3. Press <Yes> to confirm the deletion.
Call time (Menu 1.6)
Dialled calls (Menu 1.2)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
This menu displays the 20 most recent calls you have
dialled.
Received calls (Menu 1.3)
•
•
Last call time: check the length of your last call.
This menu displays the 20 most recent calls you have
received.
Total sent: check the total length of all the calls
you have dialled.
•
Total received: check the total length of all the
you have calls received.
29
Menu functions
•
Reset timers: reset the call timers. You need to
enter the phone password.
•
Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated. You need
to enter your PIN2.
The password is preset to 00000000. You can
change this password.ꢀp. 84
Phonebook (Menu 2)
Call costs (Menu 1.7)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
To access this menu, press <Menu> in Idle mode and
select Phonebook
.
•
•
Last call cost: check the cost of your last call.
Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
Contact list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Press <Contacts> in Idle mode to quickly access
this menu.
•
•
•
Max cost: check the maximum cost limit set in
Set max cost
.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
Reset counters: reset the cost counters. You
need to enter your PIN2.
Set max cost: set the maximum cost authorised
for your calls. You need to enter your PIN2.
2. Select the name you want from the list.
30
3. Press [ ] to dial the number, or <Options> to
•
•
Last name
Mobile Home
number in any category.
/
First name: assign a name.
access Phonebook options.
/
/
Office Fax Other: add a
/
/
Using Phonebook options
•
•
Email: assign an e-mail address.
While viewing a contact in Phonebook, press
Graphic ID: assign an image as a caller ID
image to alert you to a call from the number.
Alert: assign a unique ringer melody to alert
you to a call from the number.
Group: assign the number to a caller group.
Notes: add a memo about the person.
<Options> to access the following options:
•
Edit: edit the contact information.
•
•
Send message: send an SMS, MMS, or e-mail
message.
•
•
•
•
•
Copy: copy the number to the phone’s memory or
SIM card.
3. Press [
] to save the contact.
Send: send the contact via SMS, MMS, e-mail,
Bluetooth, or infrared port.
Storing a number on the SIM card
1. Select SIM and enter a name.
Delete: delete the contact.
2. Press [Down] and enter a phone number.
Add new contact (Menu 2.2)
3. If necessary, press [Down] and change the location
number.
Use this menu to add a new contact to Phonebook.
4. Press [
] to save the contact.
Storing a number in the phone’s memory
1. Select Phone
.
2. Press [Down] and change the settings or enter
information about the contact.
31
Menu functions
•
•
•
•
View: display the members of the selected group.
Add: add a new group.
Group (Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Edit: change the properties of the selected group.
Delete: delete the group, but the members of the
group are not deleted from Phonebook.
Creating a new caller group
1. Press <Options> and select Add
.
2. Enter a name for your group.
Speed dial (Menu 2.4)
3. Select the graphic ID line and select an image.
4. Select the alert line and select a melody.
5. Press <Save> to save the group.
Use this menu to assign speed dial numbers (2 to 9)
for eight of your most frequently called numbers.
Assigning speed dial entries
Adding members to a caller group
1. Select a group.
1. Select a key location from
for your voice mail server.
2
to
9. Key
1
is reserved
2. Press [
] to open the Contact list screen.
2. Select the contact you want from the contact list.
3. Select the contact you want to add to the group.
Managing speed dial entries
4. To add more members, press <Options> and
While viewing the Speed dial screen, press
select Add
→
a contact.
<Options> to access the following options:
5. Repeat step 4 as desired.
•
Add: assign a number to an unassigned key.
Managing caller groups
•
Change: assign a different number to an assigned
key.
From the group list, press <Options> to access the
following options:
•
Remove: clear all speed dial settings.
32
Dialling speed dial entries
Own number (Menu 2.6)
Press and hold the appropriate key in Idle mode.
Use this feature to check your phone numbers, or to
assign a name to each of the numbers.
My name card (Menu 2.5)
Changes made here do not affect the actual subscriber
numbers on your SIM card.
Use this menu to create a name card and send it to
other people.
Management (Menu 2.7)
Saving your name card
Use this menu to manage Phonebook.
The procedure for creating your name card is the
same as the one for saving a number in the phone’s
•
Default saving: select a default memory location
memory.ꢀp. 31
to save contacts.
If you select Ask on saving, the phone will ask
you to select a memory location when saving a
number.
Using name card options
After saving your name card, press <Options> to
access the following options:
•
•
Copy all to phone: copy all of the contacts stored
on the SIM card to the phone’s memory.
•
•
Edit: edit the name card.
Send: send the name card via SMS, MMS, e-mail,
Bluetooth, or infrared port.
Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
•
•
Exchange name card: exchange the name card
with another person’s name card via the Bluetooth
feature.
1. Press [
] to check the location(s) to clear.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Delete: delete the name card.
33
Menu functions
4. Enter the phone password and press <OK>.
Java world (Menu 3.1)
The password is preset to 00000000. You can
Use this menu to access and play Java games and to
change the network settings required for accessing
Java services.
change this password.ꢀp. 84
•
Memory status: display the number of contacts
you have stored in Phonebook.
Using Java game options
From the Java world screen, select Downloads and
press <Options> to access the following options:
Service number (Menu 2.8)
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
•
•
Launch: launch the selected MIDlet.
Application Settings: set a game to be continued
when a call comes in or an alarm sounds during
the game. You can also set the phone to exchange
game information with the network while playing
an online game or when you need to connect to
the Internet.
Scroll to the number you want and press <Dial> or
[
].
•
•
Delete: delete the MIDlet.
Applications (Menu 3)
Properties: view the MIDlet properties.
Use this menu to play Java games, to play MP3 music
files, to record a voice memo, to set time zones and
alarms, or to use the phone as a calculator, timer, or
stopwatch.
Playing Forgotten Warrior
1. From the Java world menu, select Downloads
→
Forgotten Warrior
.
2. Press any key twice.
To access this menu, press <Menu> in Idle mode and
3. Press <PLAY>.
select Applications
.
34
Menu functions
Checking memory status
Creating a play list
You can view the amount of total and used memory for
Java games.
Add the MP3 files to the play list so you can play them.
1. From the MP3 player screen, press <Options
and select Add to list
2. Select either of the following options:
>
.
From the Java world menu, select Memory status
.
MP3 Player (Menu 3.2)
•
Add all: add all of the files in the phone’s
memory to the play list.
Use this menu to enjoy music. First, you need to save
MP3 files in your phone’s memory.
•
Add a file: add one file to the play list.
3. If you selected Add a file, scroll to a file and press
Add>. Repeat from step 1.
Downloading or receiving MP3 music files
<
Use these methods to save MP3 files to your phone:
4. Press <Back> to go back to the MP3 player
•
•
Download from the wireless web
ꢀp. 42
screen.
Download from a computer using the Samsung PC
Playing MP3 files
Studio II programmeꢀSamsung PC Studio II
User’s Guide
From the MP3 player screen, press [
During playback:
].
•
Via an active IrDA or Bluetooth connection
p. 80
The downloaded or received files are stored in the
Music folder. p. 61
ꢀ
•
Use the following buttons on the display:
Buttons
Function
Pauses
ꢀ
Resumes
36
•
Settings: change the default settings for playing
MP3 files.
Buttons
Function
Stops
Repeat: select a repeat mode.
Shuffle: select a playing order.
Volume: select a volume level.
Returns to the previous file
Skips to the next file
Changes the repeat mode
Lock volume key: lock [ / ] so that you can
prevent an accidental press of the keys from
affecting playback.
/
/
To select a button, press [Left] or [Right] to
highlight it and press [ ].
Equalizer value: select an equalizer setting.
•
•
Press [ / ] to adjust the volume.
•
Properties: view the properties of the file.
Press <Stop> to stop playback.
Changing the play list
Using MP3 file options
1. From the MP3 player screen, press <Options
>
and select Open play list to access the play list.
From the MP3 player screen, press <Options> to
access the following options:
2. Press <Options> to access the following options:
•
•
Play/Pause: begin/pause playback.
•
•
•
Play: play the currently selected file.
Add to list: add files to the play list.
Move list: move the selected file to the
position you want within the play list.
Remove: remove the file from the play list.
Remove all: remove all files from the play list.
Send: send the currently selected file via e-mail,
Bluetooth, or infrared port.
•
•
Open play list: go to the play list.
•
•
Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
•
Delete: delete the file.
37
Menu functions
Playing a voice memo
Voice recorder (Menu 3.3)
1. From the Voice record screen, press <Options
>
Use this menu to record voice memos. A voice memo
can be up to one hour long.
and select Go to voice list
.
2. Select a voice memo. The memo plays.
During playback:
Recording a voice memo
1. Press [
] to start recording.
•
Use the following buttons on the display.
2. Speak into the microphone.
Buttons
Function
Pauses
•
•
Select
Select
to pause the recording.
to resume the recording.
3. When you finish, press <Stop> or select
. The
Resumes
Stops
voice memo is automatically saved.
4. Press <Options> to access the following options:
•
•
Play: play back your voice memo.
Send: send the voice memo via MMS, e-mail,
Bluetooth, or infrared port.
Rename: change the name of the voice memo.
Delete: delete the voice memo.
Protection: protect the voice memo from
being deleted.
To select a button, press [Left] or [Right] to
highlight it and press [ ].
•
•
Press [ / ] to adjust the volume.
•
•
•
Press <Stop> to stop playback.
Using voice memo options
From the Voice record screen, press <Options> to
access the following options:
•
Properties: view the properties of the voice
mail.
•
Record: record a new voice memo.
38
•
•
Settings: change the default settings for
recording a voice memo.
Viewing and setting a foreign time zone
1. From the world map, press [Down].
Recording time: select a recording time.
2. Press [Left] or [Right] to select the foreign time
zone you want to view.
Volume: select a volume level.
3. Press [
] to save the time zone.
Default name: change the default prefix of the
voice memo.
Applying Daylight Savings Time
1. From the world map, press <Options> and select
Equalizer value: select an equalizer setting.
Go to voice list: go to the list of voice memos you
have recorded.
Set daylight saving time
.
2. Press [ ] to check the time zone(s) you want.
3. Press <Save>.
World time (Menu 3.4)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Alarm (Menu 3.5)
Use this menu to set alarms to ring at a specific time.
Setting your local time zone
Setting an alarm
1. Select the type of alarm.
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home time
zone. As the time line moves, the time and date of
the given zone display.
2. Press [Left] or [Right] to select On on the Alarm
line and press [Down].
3. Enter the time for the alarm to sound and press
[Down].
2. Press [
] to save the time zone.
39
Menu functions
4. Select AM or PM in 12-hour time format.
Calculator (Menu 3.6)
Your phone is preset to a 24-hour format. You
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
can change the time format.ꢀp. 74
5. Select the Alarm day line.
1. Enter the first number.
6. Press [
] to check the day(s) for the alarm.
Press [ ] to insert a decimal point.
2. Press [ ] to access the math function you want.
3. Enter the second number.
7. Press <OK>.
8. Select the Alarm tone line and select an alarm
melody.
4. Press <Equal> to view the result.
9. Press <Save> and then <Yes>.
Stopping an alarm
Convertor (Menu 3.7)
When the alarm sounds, choose either of the following
options to stop the alarm:
Use this menu for common conversions, such as
temperature.
•
•
Press <Confirm>.
1. Select the converter type you want.
Press <Snooze> or any key to stop the alarm for
5 minutes. You can do this a maximum of 5 times.
2. Press [Left] or [Right] to select the original unit
and press [Down].
Setting the alarm to ring even if the phone is
off
3. Enter the value to be converted and press [Down].
•
•
Press [ ] to insert a decimal point.
Press [ ] to change the temperature to above
zero (+) or below zero (-).
From the Alarm screen, select Auto power
→
On.
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
40
4. Press [Left] or [Right] to select the unit you want
to convert to.
Stopwatch (Menu 3.9)
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
The maximum measurement time is 10 hours.
The equivalent value for the amount you entered
displays.
1. Press [
2. Press [
] to start the timer.
Timer (Menu 3.8)
] to check an interval. You can repeat
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
this step for a total of 4 intervals.
SIM-AT (Menu 3.10)
Starting the timer
1. Press <Set>.
This menu is available if you use a SIM-AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services. Available
services may vary, depending on your service
provider’s plans.
2. Enter the length of time you want to count down.
3. Press [
] to start counting down.
Stopping the timer
For details, see your SIM card instructions or contact
your service provider.
•
•
Press any key to stop the timer when it rings.
Press [ ] on the Timer screen to stop the timer
before it rings.
41
Menu functions
Selecting and using browser menu options
1. Press <Menu> and select Menu. Or select the
Browser (Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access updated
information and a wide variety of media content, such
as wallpapers, ring tones, and music files.
on the top of the screen.
2. Select one of the following browser options:
•
•
•
•
•
Back: go back to the previous page.
Home: go back to the homepage.
Exit: exit the WAP browser.
Reload: reload the current page.
Show URL: display the URL address of the
current web page. You can also set the current
page as the homepage for the WAP browser.
About...: view version information for your
WAP browser.
To access this menu, press <Menu> in Idle mode and
select Browser
.
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [
•
] in Idle mode.
Navigating with the WAP browser
Using WAP page options
From any WAP page, press [
following options:
] to access the
To
Press
scroll through browser items
select a browser item
return to the previous page
return to the homepage
[Up] or [Down].
•
•
Go to URL: enter a URL address manually.
Bookmarks: switch to the Bookmarks menu.
Menu 4.2
Messages: check the Inbox
box in the Short messages menu. You can also
create and send a new SMS message. p. 45
<
<
>.
ꢀ
Back> or [C].
•
,
Outbox, and Draft
and hold [C].
ꢀ
42
•
Funbox: switch to the Funbox menu.
ꢀp. 60
•
Delete: delete the bookmark.
Exiting the WAP browser
Go to URL (Menu 4.3)
Press [ ] to exit the browser.
Use this menu to manually enter the URL address of a
website and access the website.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses to quickly access
a website.
Clear cache (Menu 4.4)
Use this menu to clear the cache, which is the
temporary memory that stores the web pages you
have recently accessed.
Adding a bookmark
1. Select an empty location.
2. Enter a name for the bookmark and press [Down].
3. Enter a URL address.
Profile settings (Menu 4.5)
Use this menu to set up servers for the WAP browser.
Contact your service provider for details about your
settings options.
4. Press [
] to save the bookmark.
Accessing a bookmarked page
Scroll to a bookmark item and press [
].
For each server, the following options are available:
Using bookmark options
•
•
•
Profile name: assign a name to the server profile.
After saving an item, press <Options> to access the
following options:
Home URL: set the address of your homepage.
Bearer: select a bearer for each type of network
•
•
Go: access the website.
address accessed.
Edit: edit the address and name of the bookmark.
43
Menu functions
•
Proxy: select whether or not the phone uses a
proxy server to launch the WAP browser. Your
service provider can tell you if your network
requires a proxy server, and they can give you the
appropriate settings.
•
GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable
:
IP address: enter the WAP gateway address.
Port: enter the port number.
•
GPRS settings: customise the following GPRS
network settings:
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
When the proxy is set to Enable
:
Password: enter the password.
IP address: enter the WAP gateway address.
Data call type: select a data call type.
Port: enter the port number.
When the proxy is set to Disable
:
APN: enter the access point name of the GPRS
DNS 1: enter the primary address.
DNS 2: enter the secondary address.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
network gateway.
Login ID: enter the User ID.
Password: enter the password.
When the proxy is set to Disable
:
Password: enter the password.
DNS 1: enter the primary address.
Data call type: select a data call type.
DNS 2: enter the secondary address
.
APN: enter the access point name of the GPRS
network gateway.
Current proxy (Menu 4.6)
Use this menu to activate one of the proxy servers you
have set up.
Login ID: enter the user ID
.
Password: enter the password
.
44
3. Press <Options> to access the following options:
Messages (Menu 5)
•
•
Text style: change the text attributes.
Add media: add a picture, animated image, or
a melody to the message.
Use the Messages menu to send and receive short
messages, multimedia messages, and e-mails. You
can also use WAP push message, Voice mail, and Cell
broadcast message features.
•
•
Text template: retrieve a text template.
Save message: save the message in the
Draft box.
To access this menu, press <Menu> in Idle mode and
select Messages
.
•
Language select: change the language used
in T9 input mode.
Short messages (Menu 5.1)
4. When you finish, press <Options> and select
Send and save or Send only
Short Message Service (SMS) allows you to send or
receive text messages including pictures, audio clips,
and animated images.
.
5. Enter a destination number.
To send the message to more than one recipient,
press [Down] and fill in the destination fields.
The maximum number of characters allowed in a
short message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
6. Press <Options> and select Send
.
Viewing received SMS messages
1. From the Short messages menu, select Inbox
.
Creating an SMS message
1. From the Short messages menu, select Create
2. Select a message.
.
While viewing the message list, press <Options> to
access the following options:
2. Enter your message.
You can enter up to 160 standard characters, or
approximately 70 Unicode characters, such as ‘â’.
•
View: display the message.
45
Menu functions
•
Reply: reply to the sender.
Send: forward the message.
Delete: delete the message.
Delete all: delete all messages.
Call back: call the sender.
•
•
Block number: add the sender’s number to the
Blocked number list.
•
•
•
•
•
Protection: protect the message from being
deleted.
Viewing sent or saved SMS messages
1. From the Short messages menu, select Outbox
Block number: add the sender’s number to the
Blocked number list.
or Draft
.
2. Select a message.
While viewing a message, press <Options> to access
While viewing the message list, press <Options> to
the following options:
access the following options:
•
•
•
•
•
•
Reply: reply to the sender.
Send: forward the message.
Call back: call the sender.
Edit: edit the message.
•
•
•
•
•
View: open the message.
Send: send or resend the message.
Edit: edit the message.
Delete: delete the message.
Delete all: delete all messages.
Delete: delete the message.
Cut media: save media items from the message
to your phone’s memory.
While viewing a message, press <Options> to access
the following options:
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
•
•
Send: send or resend the message.
Edit: edit the message.
Transfer: move the message between the SIM
card and the phone’s memory.
Delete: delete the message.
46
•
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
•
Character support: select a character
encoding type. If you select Auto, the phone
switches the encoding type from GSM-alphabet
to Unicode if you enter a unicode character. Use
of Unicode encoding will reduce the maximum
number in a message to about half.
Validity period: set the length of time your
messages are stored in the message centre
while the network attempts to deliver them.
Message type: set the default message type.
Service centre: store or change the number
of your message centre.
Transfer: move the message between the SIM
card and the phone’s memory.
Protection: protect the message from being
deleted.
Changing SMS settings
1. From the Short messages menu, select
Settings
.
•
•
2. Select a setting profile to be customised. The last
setting profile accessed will be activated for
sending subsequent messages.
Setting up the Blocked number list
3. Change the following settings:
Use the Blocked number list to reject SMS messages
from specific phone numbers.
The setting options available in this menu may
vary depending on your service provider.
1. From the Short messages menu, select Block
number
.
•
•
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform
you when your message has been delivered.
2. Enter the phone number you want to block.
Press [Down] and add up to ten phone numbers.
3. Press <Options> and select Save
.
47
Menu functions
4. Select the Message line and enter the text.
Clearing SMS message boxes
1. From the Short messages menu, select Delete
5. Press <Options> to access the following options:
all
.
•
•
Edit: edit the subject or text of your message.
Add media sound: add more photos, videos,
or sounds to the message.
2. Press [
cleared.
] to check the message box(es) to be
/
3. Press <Delete>.
•
•
Preview: display the message you have
created.
Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
Page timing: specify how long a page
displays. After the specified time, the display
automatically scrolls to the next page.
Text style: format the text colour, size, or
attributes.
4. Press <Yes> to confirm the deletion.
Multimedia messages (Menu 5.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
•
Creating an MMS message
1. From the Multimedia messages menu, select
•
•
Create
.
Clear subject/Picture & Video/sound/
message: clear the subject, images, audio, or
text.
Delete page: delete an added page.
Save message: save the message in the
2. Select the Subject line and enter the subject.
3. Select the Picture & Video or Sound line and add
•
•
an image, a video, or an audio file.
The maximum size allowed for an MMS message
can differ depending on the country. If you
cannot attach another file, add another page.
Draft
6. When you have finished, press <Options> and
select Send
,
My folder, or Template box.
.
48
7. Enter a phone number or e-mail address.
•
•
Reply all: send a reply to the sender and all of the
recipients in the To and Cc fields.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
Forward: forward the message to another person.
If the message contains media purchased on the
Internet, forwarding is not available.
8. Press <Options> and select Send
.
•
•
•
•
Call back: call the sender.
Viewing received MMS messages
Delete: delete the message.
Delete all: delete all messages.
1. From the Multimedia messages menu, select
Inbox
.
Save as template: save a copy of the message in
the Template folder.
This menu displays MMS messages that you have
received. The following icons tell you the message
status:
•
Properties: view the message properties.
•
•
•
•
•
has been read
has not been read
is being retrieved from the server
Notification that you have read
Notification that you have not read
When you select a notification, you can access
Retrieve to retrieve the message from the MMS
server.
While viewing a message, press <Options> to access
the following message options:
2. Select a message.
•
•
Replay: replay the message.
While viewing the message list, press <Options> to
access the following options:
Reply: send a message to the sender.
•
•
View: open the message.
Reply: send a reply to the sender.
49
Menu functions
•
Reply all: send a reply to the sender and all of the
recipients in the To and Cc fields.
While viewing the message list, press <Options> to
access the following options:
•
Forward: forward the message to another person.
If the message contains media content purchased
on the Internet, forwarding is not available.
•
•
•
•
•
•
View: open the message.
Send: send or resends the message.
Edit: edit the message.
•
•
•
Call back: call the sender.
Delete: delete the message.
Delete all: delete all of messages.
Delete: delete the message.
Cut media: save media items from the message
to your phone’s memory.
Properties: (except Draft) display the message
properties.
•
•
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
While viewing a message, press <Options> to access
the following options:
Move to My folder: move the message to the My
folder box.
•
•
•
•
•
Replay: replay the message.
Send: send or resends the message.
Edit: edit the message.
Save as template: save a copy of the message in
the Template box.
Delete: delete the message.
Properties: view the message properties.
Cut media: (for My folder) save media items
from the message to your phone’s memory.
Viewing sent or saved MMS messages
1. From the Multimedia messages menu, select
•
•
Cut address: (except Draft) extract a URL, e-mail
address, or phone number from the message.
Outbox
,
Draft, or My folder
.
2. Select a message.
Move to My folder: (except My folder) move the
message to the My folder box.
50
•
•
Save as template: (except Draft
save a copy of the message in the Template box.
,
My folder
)
•
•
•
Send: send the template.
Edit: edit the template.
Properties: (except Draft) display the message
properties.
Delete: delete the template.
Changing MMS settings
Using MMS templates
You can customise the settings for sending and
receiving MMS messages.
Your phone has 11 preset messages that you can use
when composing a message.
1. From the Multimedia messages menu, select
1. From the Multimedia messages menu, select
Settings
.
Template
.
2. Select a setting category and change the settings.
2. Select an MMS template.
Send settings
While viewing the template list, press <Options> to
access the following options:
•
•
Priority: set the priority level of your messages.
Validity period: set the length of time your
messages are stored in the message centre.
•
•
•
•
•
•
View: display the template.
Send: send the template.
Edit: edit the template.
•
•
•
•
Delivery after: set the time delay before
messages are sent.
New: add a new template.
Delete: delete the template.
Delete all: delete all of templates.
Address hiding: hide your phone number on the
recipient’s phone.
Delivery report: set the network inform to you
when your message has been delivered.
While viewing a message, press <Options> to access
the following options:
Read reply: request a reply from the recipient.
•
Replay: replay the template.
51
Menu functions
Receive settings
MMS profiles
•
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
You can configure required network settings for MMS.
The last profile accessed is automatically activated for
sending or receiving subsequent messages.
•
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Check with your service provider before you change
any MMS settings on your phone.
•
•
Current profile: select a profile.
Home reception and Roaming reception have the
following options:
Profile setting: customise the following options
for each profile:
Automatic: the phone automatically retrieves
messages from the server.
Profile name: assign a name to the MMS profile.
Reject: the phone rejects all messages.
Server URL: enter the address of your MMS
server.
Manual: the phone displays notifications. Use the
Retrieve option to manually download new
messages.
Proxy: connect to the GPRS network using the
proxy server.
•
Anonymous reject: reject messages from
anonymous senders.
GPRS settings: customise the settings required
for connecting to the GPRS network.
•
•
Adverts reject: reject advertisements.
-
-
IP address: (when the proxy is set to Enable)
enter the gateway address.
Report allowed: send a delivery report from the
network to the sender.
Port: (when the proxy is set to Enable) enter
the port number.
52
-
-
-
DNS1: (when the proxy is set to Disable) enter
the primary address.
Email (Menu 5.3)
You can send and receive e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
profile and account.
Creating an e-mail
1. From the Email menu, select Create
DNS2: (when the proxy is set to Disable) enter
the secondary address.
APN: enter the access point name used for the
address of the GPRS network.
ꢀp. 58, p. 57
-
-
Login ID: enter the user ID.
.
Password: enter the password.
2. Select the Subject line and enter the subject of
Version: select an available OMA version and
maximum size limit for sending or receiving
messages.
your e-mail.
3. Select the Message line and enter the e-mail text.
4. Select the File attach line.
Depending on your service provider, it may not
be possible to support the maximum limit
295KB. In this case, try again after changing the
setting to 100KB.
5. Add Images
,
Videos, Music, or Sound.
6. Press <Options> to access the following options:
•
•
•
•
Add: add a subject, text, or media files.
Edit: edit the subject or text.
View: open the attached file.
Save Email: save the e-mail in the Draft or
My folder box.
Clearing MMS message boxes
1. From the Multimedia messages menu, select
Delete all
2. Press [
cleared.
.
] to check the message box(es) to be
•
Clear subject/message: clear the subject or
text.
3. Press <Delete>.
4. Press <Yes> to confirm the deletion.
53
Menu functions
•
•
Remove attachment: delete the selected
attachment.
Remove all attachments: delete all
attachments.
• The icon changes to an open envelope when
you read the e-mail.
• An
!
icon shows that an e-mail was sent with
high priority. A grey icon means that the
e-mail is of low priority.
7. When you finish, press <Options> and select
Send
.
8. Enter an e-mail address.
3. Scroll to an e-mail or header and press [
].
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
4. If the e-mail has more than one page, press [ / ]
to scroll through pages one by one.
Press [ ] or [ ] to move to the first or last page.
5. Select an attached file to view or play it.
9. Press <Options> and select Send
.
Viewing received e-mails
1. From the Email menu, select Inbox
While viewing the e-mail list, press <Options> to
access the following options:
.
2. Select Check new mail to get new mails from
Options may vary depending on the status of the
e-mail.
your server.
The phone checks for new e-mails and retrieves
received e-mails. The icons tell you the status of
each e-mail:
•
•
View: open the selected item.
Retrieve: retrieve one or all e-mails from the
e-mail server.
•
•
•
retrieved from the e-mail server
retrieved e-mail with attachment.
not retrieved
•
Reply: send a reply to the sender or to all of the
recipients.
54
•
•
•
•
Forward: forward the e-mail.
•
•
•
Block address: add the sender’s e-mail address
to the Blocked address list.
Delete: delete the currently selected item.
Delete all: delete all e-mails.
Move to My folder: move the e-mail to the My
folder box.
Sort: sort the e-mails by size, subject, data, or
senders’ e-mail addresses.
Properties: display the properties of the e-mail.
•
•
Block address: add the sender’s e-mail address
to the Blocked address list.
Viewing sent or saved e-mails
1. From the Email menu, select Outbox Draft, or
,
My folder
.
Properties: display the properties of the e-mail.
2. Select an e-mail.
While viewing a header or e-mail, press <Options> to
access the following options:
While viewing the e-mail list, press <Options> to
access the following options:
•
•
•
Retrieve: retrieve one or all e-mails.
•
•
•
•
•
•
•
View: open the e-mail.
Open file: open the attached file.
Send: send or resends the e-mail.
Cancel: (for Outbox) stop sending the e-mail.
Edit: edit the e-mail.
Save file: save the attached file in your phone’s
memory.
•
Reply: send a reply to the sender or to the sender
and all of the recipients.
Delete: delete the e-mail.
•
•
•
Forward: forward the e-mail.
Delete all: delete all e-mails.
Delete: delete the e-mail.
Sort: sort the e-mails by size, subject, data, or
senders’ e-mail addresses.
Cut address: extract e-mail addresses, URLs, and
phone numbers.
•
Properties: display the properties of the e-mail.
55
Menu functions
While reading a message, press <Options> to access
the following options:
•
•
Delivery confirm: set the network to inform you
when your e-mail has been delivered.
•
•
Open file: open the attached file.
Read confirm: send a request for a reply along
with your e-mail.
Save file: save the attached file in your phone’s
memory.
•
•
Priority: select the priority level of your e-mail.
•
•
•
•
•
Cancel: (for Outbox) stop sending the e-mail.
Send: send or resent the e-mail.
Edit: edit the e-mail.
Include signature: attach your name, phone
number, a simple memo, or tag line to your e-mail.
Receive settings
•
Check interval: determine how often the phone
checks the server for incoming e-mails.
Delete: delete the e-mail.
Cut address: (for My folder) extract e-mail
addresses, URLs, and phone numbers.
If you set this option to Not used, you can use the
Check new mail feature to check your e-mail
manually.
•
•
Move to My folder: (except My folder) move the
e-mail to the My folder box.
•
Read reply: determine whether or not the phone
sends a read-reply request.
Properties: view the properties of the e-mail.
Changing e-mail settings
1. From the Email menu, select Settings
When this option is set to Announce, the phone
reminds you to send a read-reply request with
your e-mail address.
.
2. Select a setting category and change the settings.
Send settings
•
•
Retrieve option: determine whether the phone
retrieves headers only or the entire e-mail.
•
Send copy to self: send a copy of your e-mail to
your own e-mail address.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
56
•
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Reply address: enter the reply address.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
E-mail account
SMTP port: enter the SMTP port number.
Set up your e-mail account(s) and select the one to be
used:
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
You cannot change e-mail account settings while an
e-mail is being sent or retrieved. Your e-mail
service provider can give you the information
needed for the below settings.
When the protocol type is POP3
:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
•
•
Current account: select an account.
APOP login: connect to the server by using the
APOP login scheme when this option is selected.
Account settings: configure up to five e-mail
accounts using different e-mail servers. The
following options are available for each account:
User ID: enter your e-mail ID.
Password: enter your e-mail password.
Account name: enter a name for the currently
selected account.
When the protocol type is IMAP4
:
In use: select this option to use the account and
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
to display the account in the Inbox
.
User name: enter a name to be displayed as the
sender’s name in your outgoing e-mails.
IMAP4 port: enter the IMAP4 port number.
Retrieve headers: set the number of headers you
will retrieve from the server.
Email address: enter your e-mail address.
57
Menu functions
Retrieve attachments: select this option to
DNS2: enter the secondary address.
receive attachments with e-mails.
Setting up the Blocked address and subject list
User ID: enter your e-mail ID.
Password: enter your e-mail password.
Email profile
Use the Blocked address list to reject messages from
e-mail addresses that you specify.
1. From the Email menu, select Block list
.
You can configure the network settings required to
send or receive e-mails.
2. Select Block address or Block subject
.
3. Enter an e-mail address or subject you want to
block.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
4. Add as many as ten items.
5. Press <Options> and select Save
.
The following options are available:
•
•
Current profile: select a profile.
Clearing e-mail boxes
1. From the Email menu, select Delete all.
Profile settings: configure up to five e-mail
profiles. For each profile, the following options are
required to connect to the GPRS network:
2. Press [
cleared.
] to check the message box(es) to be
Profile name: enter a name for the e-mail profile.
3. Press <Delete>.
APN: enter the access point name used for the
GPRS network address.
4. Press <Yes> to confirm the deletion.
You cannot clear the Inbox or Outbox while an
e-mail is being sent or retrieved.
Login ID: enter the User ID.
Password: enter the password.
DNS1: enter the primary address.
58
•
•
Connect to voice mail: connect to the voice
server to allow you to listen to your messages. You
can also connect to the voice mail server by
Push messages (Menu 5.4)
Use this menu to access messages from the WAP
server.
pressing and holding [1] in Idle mode.
•
•
Inbox: view push messages you have received.
Voice server number: change the voice mail
server name or number.
Settings: determine whether or not your phone
receives push messages.
Always: the phone receives push messages.
Text template (Menu 5.6)
Never: the phone rejects push messages.
Use this menu to preset a maximum of ten frequently
used messages.
Optional: the phone receives push messages from
the service centre set in this option.
Adding a text template
1. Select an empty location.
•
Delete all: delete all of push messages.
2. Enter the message and press [
].
Voice mail (Menu 5.5)
Using template options
Use this menu to store the number of the voice mail
server and access your voice mails.
From the template list, press <Options> to access
the following options:
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
•
•
Edit: add a template or change the selected one.
Send message: send the template as an SMS,
MMS or e-mail message.
•
Delete: delete the template.
59
Menu functions
Broadcast messages (Menu 5.7)
Memory status (Menu 5.8)
The Cell Broadcast service delivers short messages on
various topics such as the weather or traffic.
Use this menu to view the memory status for text,
multimedia, e-mail, or push messages.
Use this menu to change the settings for the service
and to access broadcast messages.
Funbox (Menu 6)
•
Read: open received messages.
The Funbox menu allows you to access images,
videos, voice memos, music files, and sounds stored in
the phone’s memory.
The Temporary box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press <Options> and select Save
when a text notification appears to save to the
Archive box.
To access this menu, press <Menu> in Idle mode and
select Funbox
.
Images (Menu 6.1)
•
•
•
Receive: enable or disable the reception of
broadcast messages.
This menu displays photos you have taken and images
downloaded or received in messages.
Channel: specify the channels from which you
receive broadcast messages.
Viewing an image
1. Select an image folder, Photos
,
My photos, or
Language: select the language in which broadcast
messages display.
Downloaded images
.
A list of images displays. For downloaded images,
the icons tell you the status of the files:
Please contact your service provider for details.
•
•
you can forward to other people
you are unable to forward to other people
60
2. Scroll to an image and press [
].
Music (Menu 6.3)
Using image options
This menu displays MP3 music files you have
downloaded or imported from your computer.
While viewing the image list or an image, press
Options> to access the options. p. 72
<
ꢀ
Playing a music file
Scroll to a file and press [
].ꢀp. 36
Videos (Menu 6.2)
Using music options
This menu displays video clips you have recorded,
downloaded, or received in messages.
While viewing the music list, press <Options> to
access the following options:
Playing a video clip
1. Select a video folder, Video clips
Available options vary depending on whether or not
playback is in progress.
,
My video clips,
or Downloaded videos
.
•
•
Play/Pause: begin/pause playback.
A list of videos displays. For downloaded videos,
the icons tell you the status of the files:
Send: send the currently selected file via e-mail,
Bluetooth, or infrared port.
•
•
you can forward to other people
you are unable to forward to other people
•
•
•
Add play list: add a file to the play list.
2. Scroll to a video clip and press [
].ꢀp. 73
Open play list: go to the play list.
Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
Using video options
While viewing the video list, press <Options> to
access the options. p. 74
•
•
Rename: change the file name.
ꢀ
Delete: delete the file.
61
Menu functions
•
Settings: change the default settings for playing
files.
A list of sound clips displays. For downloaded
sounds, the icons tells you the status of the files:
Repeat: select a repeat mode.
Shuffle: select a playing order.
Volume: select a volume level.
•
•
you can forward to other people
you are unable to forward to other people
2. Scroll to a sound clip and press [
].ꢀp. 38
Lock volume key: lock [ / ] so that you can
prevent an accidental press of the keys from
affecting playback.
Using sound options
While viewing the sound list, press <Options> to
access the options. p. 38
ꢀ
Equalizer value: select an equalizer setting.
Delete all: delete all of files.
Memory status (Menu 6.5)
•
•
•
Protection: protect the file from being deleted.
Properties: display the properties of the file.
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
Sounds (Menu 6.4)
Organiser (Menu 7)
The Organiser feature enables you to keep track of
your schedule and tasks, to view missed alarm events,
and to make a memo.
This menu displays the sound files you have recorded,
downloaded, or received in messages.
Playing a sound clip
1. Select a sound folder, Voice list or Downloaded
To access this menu, press <Menu> in Idle mode and
sounds
.
select Organiser
.
62
Preceding events: delete events on past dates.
Month view (Menu 7.1)
•
Delete all: delete all of scheduled events.
Use this menu to keep track of your monthly schedule.
Consulting the calendar
You can schedule up to 400 events on the calendar,
and schedule more than one event per day.
When you select Month view to display the calendar,
today’s date is marked with a red box.
Entering a new scheduled event
1. Select a date on the calendar.
The number of events displays at the bottom of the
calendar. The following icons indicate the type of
event:
2. Press <Options> and select Create
or Miscellaneous
→
Schedule
.
3. Enter information or change the settings in the
following entry fields:
•
•
Scheduled events
Tasks
•
•
Anniversaries
Miscellaneous events
•
•
•
Subject: enter the title of the event.
Details: enter event details.
Press <Options> to access the following options:
Start date and End date: enter the starting
and ending dates for the event.
Start time and End time: enter the starting
and ending times for the event.
AM/PM: select AM or PM in 12-hour time
format.
•
•
View: access the stored memo(s) for that date.
Create: add a new event, anniversary,
miscellaneous event, or task.
•
•
•
•
•
•
•
•
Week view: switch to the week view screen.
Go to today: access the current date.
Go to date: enter a specific date.
Location: (for Schedule) enter information
about the event location.
Delete: access the following deleting options:
Selected date: delete items stored on the
Alarm: set an alarm for the event.
currently selected date.
63
Menu functions
•
•
•
Before: set the time for the alarm.
•
•
Alarm time: enter the time for the alarm to
sound.
AM/PM: select AM or PM in 12-hour time
format.
Alarm tone: select an alarm tone.
Repeat: (for Schedule) set the event to recur,
and set a repeat unit.
•
•
Alarm tone: select an alarm tone.
Repeat every year: you can set the phone to
remind you of the anniversary every year.
•
Until: (for Schedule) if the event will recur,
set the ending date.
4. Press <Save> to save the event.
4. Press <Save> to save the event.
Entering a new anniversary
1. Select a date on the calendar.
Entering a task
1. Select a date on the calendar.
2. Press <Options> and select Create
2. Press <Options> and select Create
→
Anniversary
.
→
To do.
3. Enter information or change the settings in the
following entry fields:
3. Enter information or change the settings in the
following entry fields:
•
Occasion: enter information about the
anniversary.
Date: enter the date.
Alarm: set an alarm for the anniversary.
Before: set the time for the alarm. Select day
•
•
•
•
To do: enter information about the task.
Start date: enter the starting date.
Due date: enter the ending date.
Priority: select a priority level.
•
•
•
4. Press <Save> to save the event.
or week
.
64
Viewing an event
Week View (Menu 7.2)
Square brackets on a calendar date indicate the
following type of events scheduled for that day:
Use this menu to view events for the selected week.
The current date is marked in red. Blue boxes indicate
scheduled events, and green boxes indicate
miscellaneous events. Select the cell that contains the
event you want.
•
•
Blue: scheduled
Red: task
•
•
Orange: anniversary
Green: miscellaneous event
1. Select a date on the calendar to display the events
for that day.
Day view (Menu 7.3)
2. Select an event to view its details.
Use this menu to view events for the selected date.
Select an event to view its details.
3. Press <Options> to access the following options:
•
•
•
View: access the selected event.
Edit: edit the event.
Send: send the event via SMS, MMS, e-mail,
Bluetooth, or infrared port.
Create: add a new event.
Month view: switch to the month view screen.
Week view: switch to the week view screen.
Schedule (Menu 7.4)
This menu displays the scheduled events. If you have
set the Repeat and Alarm options, the
are activated. Select an event to view its details.
and
icons
•
•
•
•
Anniversary (Menu 7.5)
Done/Undone: change the status of the
This menu displays anniversaries you have created. If
you have set the Repeat and Alarm options, the
event.
•
•
Delete: delete the event.
Delete all: delete all of the events for the
selected date.
and
details.
icons are activated. Select an event to view its
65
Menu functions
Viewing a missed event alarm
Miscellaneous (Menu 7.6)
1. From the Organiser menu, select Missed alarm
This menu displays miscellaneous events you have
event
.
created. If you have set the Alarm option, the
is activated. Select an event to view its details.
icon
2. Select an event.
3. Press <Confirm> to confirm and delete the event.
To do (Menu 7.7)
Using missed alarm options
Use this menu to display tasks you have created. The
colours of status check boxes indicate the importance:
From the event list, press <Options> to access the
following options:
•
•
•
Red
!
for high priority
•
•
•
View: access the event.
Delete: delete the event.
Delete all: delete all events.
Blue for normal priority
Grey for low priority.
A check mark appears in the status check box if the
task has been completed. The options you can use are
the same as in Day view.
Memo (Menu 7.9)
Use this menu to create memos and view memos you
have stored.
Missed alarm events (Menu 7.8)
Creating a new memo
When you are unable to acknowledge an alarm, the
phone displays a missed alarm notification.
1. Press [
].
2. Enter the memo text and press [
].
Press <View> to view the corresponding event.
66
Viewing a memo
• Do not take photos of people without their
permission.
Select a memo to view its details.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Using memo options
From the memo list, press <Options> to access the
following options:
•
•
•
•
Edit: edit the memo.
Create: add a new memo.
Delete: delete the selected memo.
Delete all: delete all memos.
Take a photo (Menu 8.1)
The camera produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Memory status (Menu 7.10)
Taking a photo
1. If the phone is closed, open the phone.
This menu displays the total amount of memory for
the calendar, the number of events you have created,
and the total number of events you can store.
2. Press and hold [ ]. The image to be captured
appears on the display.
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
3. Adjust the image by aiming the camera lens at the
subject.
•
Press the left soft key to use the camera
options. p. 68
Use the keypad to change the camera settings
or switch to other modes. p. 69
ꢀ
To access this menu, press <Menu> in Idle mode and
select Camera, or press [ ].
•
ꢀ
67
Menu functions
4. Press [ ] to take a photo. The photo is saved in
Mosaic shot: take several stills and save them in
one frame. Select the number of still images the
camera will take.
the Photos folder.
Hold the phone still for one or two seconds after
pressing the camera shutter key to allow the
image data to process.
Night shot: take a high quality photo in low
lighting conditions.
Automatic save: set the phone to automatically
save a photo after taking the photo.
5. To
use photo options
Press
•
Effects: change the colour tone or apply a special
effect to the photo.
<Options>.ꢀp. 70
delete the photo
<Delete>.
•
•
Frames: apply a decorative frame.
return to Capture mode
[C] or [
].
Timer: set a time delay before the camera takes a
photo.
•
•
Go to photo album: display the photos stored in
the Photos or My photos folder.
Using camera options in Capture mode
In Capture mode, press the left soft key to access the
following options:
Settings: change the default settings for taking a
photo.
•
Shooting mode: take a photo in the following
modes:
Size: select an image size.
Quality: select an image quality.
Single shot: take a photo in the normal mode.
Shutter sound: select the sound that you hear
Multi shot: take a series of action stills. Select the
number of photos the camera will take.
when you press the shutter, [ ] or [
].
68
Spot focus: adjust the exposure based on a
specific area of the image. Select On to display the
spot focus frame in the middle of the image, and
change the exposure according to the brightness of
the image fragment in the frame.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
lower the ISO number to increase the quality.
Flips the image vertically.
Shows the mirror image.
Adjusts the brightness of the image.
Left/
Right
The higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
Up/
Down
Zooms in or out.
Default name: change the default prefix of the
photo name.
1
2
3
4
5
Switches to Record mode.
ꢀp. 70
Changes the image size.
•
•
Flash: turn the flash on or off.
Changes the image quality.
Changes the camera mode.
Camera short cuts: view the functions of the
keys you can use.
Changes the colour tone or applies a special
effect to the photo.
6
Reduces the distortion on the image to
maximise detail and sharpness.
69
Menu functions
•
Properties: view the properties of the photo.
Key
7
Function
Selects a decorative frame.
Sets the timer.
Record video (Menu 8.2)
8
You can record a video of what is displayed on the
camera screen and save it as a .3gp file.
9
Shows the photos stored in the Photos or
My photos folder.
Recording a video
0
Turns the flash on or off.
1. Turn the camera on, and aim the lens at the
subject. Adjust the image.
Shows the real image size to be captured.
•
Press the left soft key to use the camera
options. p. 71
Use the keypad to change the camera settings
or switch to other modes. p. 71
2. Press [ ] to start recording.
ꢀ
Using photo options
•
After saving a photo, press <Options> to access the
following options:
ꢀ
•
•
Take another: return to Capture mode.
3. Press <Stop> or [ ]. The video is automatically
Send: send the photo via MMS, e-mail, Bluetooth,
or infrared port.
saved in the Video clips folder.
.
•
•
Set as: set the photo as your wallpaper or as a
caller ID image for a Phonebook entry.
4. To
play back the video clip
Press
[
].
Go to photo album: display the photos stored in
the Photos or My photos folder.
use the video options
delete the video clip
return to Record mode
<
Options>.
Delete>.
].
ꢀp. 72
•
•
Rename: change the name of the photo.
<
Protection: protect the photo from being deleted.
[C
70
•
•
Flash: turn the flash on or off.
Using camera options in Record mode
Camcorder short cuts: view the functions of the
keys you can use.
In Record mode, press <Options> to access the
following options:
•
•
•
•
Effects: change the colour tone or apply a special
effect to a video.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Timer: set a time delay before the camera starts
recording a video.
Key
Function
Go to video album: display the video clips stored
in the Video clips or My video clips folder.
Flips the image vertically.
Shows the mirror image.
Zooms in or out.
Settings: change the following settings for
recording a video:
Up/
Down
Recording mode: select a video recording mode.
Select Limit of MMS to record a video suitable for
an MMS message.
Left/
Adjusts the brightness of the image.
Right
Select Normal to record a video within the limit of
the currently available memory.
1
2
3
4
Switches to Capture mode.
ꢀp. 67
Size: select an image size.
Changes the frame size.
Quality: select an image quality.
Audio rec.: record audio with a video clip.
Changes the image quality.
Changes the video recording mode.
Default name: change the default prefix of the
video name.
71
Menu functions
•
•
Rename: change the name of the video clip.
Key
5
Function
Protection: protect the video clip from being
deleted.
Changes the colour tone or applies a special
effect to the photo.
•
Properties: view the properties of the video clip.
6
Reduces the distortion on the image to
maximize detail and sharpness.
Photos (Menu 8.3)
7
8
9
Mutes or unmutes the audio.
Sets the timer.
Use this menu to access a list of photos you have
taken.
Viewing the photos
Shows the video clips stored in the Video
clips or My video clips folder.
1. Scroll to a photo and press [
].
2. To go back to the photo list, press [
] or Back.
0
Turns the flash on or off.
Using photos options
Using video options
Press <Options> to access the following options:
Press <Options> after saving a video clip to access
the following options:
Available options vary depending on whether you
are looking at the photo list or viewing a photo.
•
•
Record another: return to Record mode.
•
•
•
View: open the photo.
Send: send the video clip via MMS, e-mail,
Bluetooth, or infrared port.
List: return to the photo list.
Send: send the photo via MMS, e-mail, Bluetooth,
or infrared port.
•
Go to video album: move to the Video clips or
My video clips folder.
72
•
•
•
Move to My photos: move the photo to the My
photos folder.
Video clips (Menu 8.5)
Use this menu to access a list of videos you have
recorded.
Set as: set the photo as your wallpaper or as a
caller ID image for a Phonebook entry.
Playing a video clip
Edit: access the following options:
Scroll to a video clip and press [
During playback:
].
Emoticons: add an emoticon to the photo. Select
one and move it by pressing the Navigation keys.
•
Use the following buttons on the display:
Frames: select a decorative frame.
Effects: change the colour tone or apply a special
effect to the photo.
Buttons
Function
Pauses
•
Slide show: set all photos to display as a slide
show. You can select a time interval between
photos.
Resumes
Stops
•
•
•
•
•
Rename: change the name of the photo.
Delete: delete the photo.
Skips backward through a file
Skips forward through a file
Repeats the file
Delete all: delete all of photos.
Protection: protect the photo from being deleted.
Properties: view the properties of the photo.
To select a button, press [Left] or [Right] to
highlight it and press [ ].
Press [ / ] to adjust the volume.
My photos (Menu 8.4)
•
Use this menu to view photos you have moved from
the Photos folder.
73
Menu functions
Using video options
Settings (Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
Press <Options> to access the following options:
•
•
Play: play the video clip.
Send: send the video clip via MMS, e-mail,
Bluetooth, or infrared port.
To access this menu, press <Menu> in Idle mode and
select Settings
.
•
Move to My video clips: move the video clip to
the My video clips folder.
Time & Date (Menu 9.1)
•
•
•
Rename: change the name of the video clip.
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
Delete: delete the video clip.
specify your time zone in the World time menu.
ꢀp.
Delete all: delete all video clips. This option
appears on the video clip list.
39
•
Set time: enter the current time using the number
keys.
•
•
Protection: protect the video clip from being
deleted.
•
•
AM/PM: select AM or PM in 12-hour time format.
Properties: view the properties of the video clip.
Time format: select 12-hour or 24-hour time
My video clips (Menu 8.6)
format.
•
•
Set date: enter the current date using the number
keys.
Use this menu to access video clips you have moved
from the Video clips folder.
Date format: select a date format.
74
Short cut (Menu 9.2.4)
Phone settings (Menu 9.2)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to change these shortcut assignments.
Many different features of your phone’s system can be
customised to suit your preferences.
Language (Menu 9.2.1)
Assigning a shortcut to a key
Use this menu to select one of several languages for
the display text.
1. Select the key to be used as a shortcut key.
2. Scroll to the menu that will be assigned to the key.
3. Press <Save>.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Using shortcut options
Press <Options> to access the following options:
Slide settings (Menu 9.2.3)
•
•
Change: change a shortcut menu.
Use this menu to set how the phone reacts when you
open it for an incoming call, and when you close it
while using a function.
Remove: deactivate the shortcut assignment to
the selected key.
•
Remove all: deactivate all shortcut assignments.
•
Up: set whether or not to answer a call by opening
the phone.
Extra settings (Menu 9.2.5)
•
Down: set whether or not the phone maintains
the menu you are using when you close the phone.
You can turn the automatic redialing or answering
features on or off.
When you set Down to Continue operation, the
keypad lock works only in Idle mode.
•
Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
75
Menu functions
•
Anykey answer: answer an incoming call by
pressing any key, except [ ] or <Reject>.
Text display (Menu 9.3.2)
You can change the display settings for the text
displayed on the idle screen.
When this option is set to Off, you must press [
or <Accept> to answer a call.
]
•
Text position: select a position. If you do not
want text to display in Idle mode, select Off
•
Voice clarity: removes extraneous noise and
.
increases call quality so that the person with whom
you are speaking can hear you clearly even if you
are in a noisy place.
•
•
Text style: select a style.
Text colour: select a colour.
Skin (Menu 9.3.3)
Display settings (Menu 9.3)
You can select a skin colour pattern for Menu mode.
Use this menu to change settings for the display and
light.
LCD brightness (Menu 9.3.4)
You can adjust the brightness of the display for
varying lighting conditions.
Wallpaper (Menu 9.3.1)
You can change the background image that is
displayed in Idle mode.
Backlight (Menu 9.3.5)
You can select the length of time the backlight and the
display stay on.
Select an image from the following image categories.
•
•
•
Default wallpapers: select one of preset images.
•
On: select the length of time the backlight is on at
times of inactivity.
Photos: select one of the photos you have taken.
My photos: select one of the photos stored in the
My photos folder.
•
Dim: select the length of time the display is in
Dimming mode after the backlight turns off. After a
specified time, the display turns off and the clock
displays.
•
Downloaded images: select one of the images
you have downloaded.
76
Message tone (Menu 9.4.3)
Sound settings (Menu 9.4)
Use this menu to set up the ringer for incoming SMS
messages, MMS messages, and e-mails.
Use this menu to customise various sound settings.
Incoming call (Menu 9.4.1)
•
•
Tone: select one of several message tones.
Use this menu to select a volume level and alert type
for incoming calls.
Alert type: specify how you are informed of any
incoming messages.
•
•
•
Ring tone: select a ring tone for the call ringer.
•
Repetition: specify how often the phone informs
you of a new message.
Volume: select a ringer volume.
Alert type: specify how you are to be informed of
incoming calls.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Melody: the phone rings using the selected ring
tone.
Slide tone (Menu 9.4.5)
Vibration: the phone vibrates but not rings.
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Vibration then melody: the phone vibrates three
times and then starts ringing.
Quiet mode (Menu 9.4.6)
Keypad tone (Menu 9.4.2)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using [ / ]
in Idle mode.
•
•
Vibration: set the phone to vibrate.
Mute: mute all sound settings.
77
Menu functions
1. Select a call diverting option:
Extra tones (Menu 9.4.7)
•
•
Divert always: divert all calls.
Busy: divert calls when you are on another
call.
No reply: divert calls when you do not answer
the phone.
Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
Cancel all: cancel all call diverting options.
Use this menu to customise additional tones for the
phone.
•
Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
•
•
•
•
Connection tone: set the phone to beep when it
is connected to the system.
Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
•
2. Select the type of calls to be diverted.
3. To activate call diverting, select Activate
.
•
Indicative tones: set the phone to beep when a
pop-up window displays.
Otherwise, select Deactivate
.
4. Move to the Divert to line.
Network services (Menu 9.5)
5. Enter the number to which calls are to be diverted
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
and press <OK>.
6. If you selected No reply, move to the Sec line and
select the length of time the network delays before
diverting a call.
Call diverting (Menu 9.5.1)
This network service reroutes incoming calls to a
phone number that you specify.
78
4. Enter the call barring password supplied by your
Call barring (Menu 9.5.2)
service provider and press <OK>.
This network service allows you to restrict your calls.
1. Select a call barring option:
Call waiting (Menu 9.5.3)
•
•
•
All outgoing: prohibit all outgoing calls.
International: prohibit international calls.
International except to home: only allow
calls to numbers within the current country
when you are abroad, and to your home
country, defined as where your home network
provider is located.
All incoming: prohibit incoming calls.
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <Activate>. To deactivate call waiting,
press <Deactivate>.
Network Selection (Menu 9.5.4)
•
•
This network service allows you to either automatically
or manually select the network used when roaming
outside of your home area.
•
•
Cancel all: cancel all call barring settings,
allowing to be sent and received normally.
Change barring password: change the call
barring password obtained from your service
provider.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
•
Automatic: connect to the first available network
when roaming.
2. Select the type of calls to be barred.
•
Manual: select the network you want.
3. Press <Activate>. To deactivate call barring,
press <Deactivate>.
79
Menu functions
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
Active line (Menu 9.5.7)
•
•
•
Default: use the default setting provided by the
network.
Some SIM cards may be used with two subscriber
numbers. If your SIM card supports it, use this menu
to select the line that is used to make calls. Calls can
be answered on both lines, regardless of the selected
line.
Hide number: ensure your number does not
display on the other person’s phone.
Send number: send your number each time you
make a call.
Connectivity (Menu 9.6)
Band selection (Menu 9.5.6)
Use this menu to activate the IrDA port or the
Bluetooth feature.
For the phone to make and receive phone calls, it
must register with an available network.
You cannot use the Bluetooth and IrDA features
while using multimedia features such as voice
recorder, camera, and MP3 player, or vice versa.
Your phone can handle any of the following types of
networks: GSM 1900, Combined GSM 900/1800, and
GSM 900/1800/1900.
Bluetooth (Menu 9.6.1)
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the phone
remotely.
80
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 metres. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices
.
2. Select Search new device
.
Setting up the Bluetooth feature
If you have searched for devices before, the phone
displays More devices along with the devices you
have searched for previously. To search for new
The Bluetooth menu provides the following options:
•
•
•
•
Activation: activate or deactivates the Bluetooth
feature.
devices, select More devices
.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
My devices: search for connectable Bluetooth
devices.
ꢀp. 81
My phone’s visibility: allow other Bluetooth
devices to connect to your phone.
•
•
•
•
•
Hands-free or headset
Mobile phone
Computer
PDA
Unknown device
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
•
•
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
The colour of the icon indicates the status of the
device:
•
•
Grey for unpaired devices
Blue for paired devices
Bluetooth services: display available Bluetooth
services.
81
Menu functions
•
Red for devices that are currently connected to
your phone
•
Authorise device/Unauthorise device:
determine if the phone asks you to permit
connection when other devices try to connect to
your phone.
3. Select a device.
4. Enter a Bluetooth PIN code of up to 16 digits and
press <OK>. This code is used just once and you
don’t need to memorise it.
•
•
Delete: delete the device.
Delete all: delete all devices.
When the owner of the other device enters the
same code, pairing is finished.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has one, you must enter
the code.
3. Scroll to the item you want and press <Options>.
4. Select Send
→
via Bluetooth.
Using device options
The phone searches for devices within range and
displays a list of available devices.
From the device list, press <Options> to access the
following options:
5. Select a device.
•
Connect: connect to the currently selected device.
You need to enter the Bluetooth PIN.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
•
•
Disconnect: end the connection with the device.
Receiving data via Bluetooth
Browse files: search for data from the device and
import data directly to your phone.
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
•
Rename: rename the paired device.
82
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Security (Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
Infrared (Menu 9.6.2)
Use this feature to send and receive data through the
infrared port. To use an infrared connection, you must
do the following:
If you enter an incorrect PIN /PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
•
•
•
Configure and activate an IrDA-compliant infrared
port on the other device.
Activate the infrared feature on your phone (the
PIN check (Menu 9.7.1)
IrDA icon
displays on the top line).
The 4-to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Align the IrDA port on the
phone with the IrDA port on
the other device.
If there is no communication
between your phone and the
other IrDA-compliant device
within 60 seconds of activating
the feature, it is automatically
deactivated.
Change PIN (Menu 9.7.2)
Use this menu to change your PIN. The PIN Check
feature must be enabled to use this feature.
Phone Lock (Menu 9.7.3)
The Phone Lock feature locks the phone from
unauthorised use.
83
Menu functions
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
SIM Lock (Menu 9.7.6)
The SIM Lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
The password is preset to 00000000. To change the
password, use the Change password menu.
FDN mode (Menu 9.7.7)
Change Password (Menu 9.7.4)
If supported by your SIM card, Fixed Dialing Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in
Phonebook. To use this feature, you must enter your
PIN2.
Use this menu to change your phone password. The
password is preset to 00000000
.
Privacy (Menu 9.7.5)
Use this menu to lock your media contents, including
MMS messages, e-mails, images, videos, music files,
and sounds.
Change PIN2 (Menu 9.7.8)
1. Press [
] to check the item(s) to lock.
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
2. Press <Save> to lock the marked items.
3. Enter the phone password and press <OK>.
Memory status (Menu 9.8)
To access a locked item, you need to enter the phone
password.
Use this menu to check the amount of memory being
used for storing data in Shared Memory
,
Messages,
Funbox Organiser Phonebook, and Java world.
,
,
84
Reset settings (Menu 9.9)
Solve problems
Help and personal needs
Use this menu to reset the phone settings, display
settings, and sound settings individually. You can also
reset all the settings in your phone at the same time.
To save the time and expense of an unnecessary
service call, perform the simple checks in this section
before contacting a service professional.
1. Press [
be reset.
] to check the setting category(ies) to
2. Press <Reset> to reset the marked items.
3. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
When you switch on your phone, the following
messages may appear:
“Insert SIM”
change this password
ꢀp. 84
•
Be sure that the SIM card is correctly installed.
“Phone lock”
The automatic locking function has been enabled.
•
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
•
You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
•
The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
85
Solve problems
“Enter PUK”
Your correspondent cannot reach you
•
The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
•
•
•
Be sure your phone is switched on. ([ ] pressed
for more than one second.)
Be sure you are accessing the correct cellular
network.
“No Service,” “Network Failure,” or “Not
Done” displays
•
Be sure that you have not set an outgoing call
barring option.
The network connection has been lost. You may be
in a weak signal area. Move and try again.
Your correspondent cannot hear you speaking
•
•
•
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Be sure you have switched off the microphone.
Be sure you are holding the phone close enough to
your mouth. The microphone is located at the
bottom of the phone.
You have entered a number but it was not
dialled
•
•
The phone starts beeping and “Battery low”
flashes on the display
•
Be sure that you have pressed [ ].
Be sure you have accessed the right cellular
network.
Your battery is insufficiently charged. Recharge the
battery.
•
Be sure that you have not set an outgoing call
barring option.
The audio quality of the call is poor
Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong ( ) to weak ( ).
•
(
86
•
Try moving the phone slightly or moving closer to a
window if you are in a building.
Health and safety information
SAR certification information
No number is dialled when you re-call a
Contacts entry
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
•
Use the Contact Search feature to ensure the
number has been stored correctly.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
•
Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take note of:
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
•
•
•
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/
kg.*
The highest SAR value for this model phone was 0.310 W/
kg.
87
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Precautions when using batteries
•
Never use a charger or battery that is damaged in any
way.
•
•
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
•
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
•
•
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
*
The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body tis-
sue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary,
depending on national reporting requirements and the network
band.
88
•
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged. Li-
ion batteries are particularly affected by temperatures
below 0°C (32°F).
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone while driving, follow local
regulations in the country or region you are in.
•
•
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
89
Health and safety information
Other medical devices
Electronic devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Your physician may be able to assist you in obtaining this
information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Hearing aids
Posted facilities
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Switch off your phone in any facility where posted notices
require you to do so.
90
Potentially explosive environments
Emergency calls
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
communications like medical emergencies.
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
91
Health and safety information
Other important safety information
Care and maintenance
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
Keep the phone and all its parts and accessories out of
the reach of small children.
•
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
•
•
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
•
•
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•
•
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
92
•
•
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
•
•
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
•
•
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
93
Connection tone • 78
Conversion • 40
Creating messages
e-mail • 53
MMS • 48
SMS • 45
Creating organiser
anniversaries • 64
events • 63
language • 75
settings • 76
Diverting, calls • 78
DTMF tones, send • 27
C
Index
A
ABC mode, text input • 21
Active line • 80
Alarm • 39
Calculator • 40
Call costs • 30
Call records
dialled • 29
E
missed • 29
received • 29
Call time • 29
Caller group
creating • 32
managing • 32
Caller ID • 80
Calls
answering • 24
barring • 79
diverting • 78
holding • 25
redialling • 23
rejecting • 24
waiting • 79
Camera
E-mails
Answering
creating/sending • 53
deleting • 55
setting • 56
call • 24
second call • 26
Anykey answer • 76
Auto redial • 75
memos • 66
tasks • 64
viewing • 54, 55
Emergency calls • 91
D
B
F
Deleting
Backlight time, set • 76
Band selection • 80
Barring, calls • 79
Battery
FDN (Fixed Dialling Number)
mode • 84
Forwarding
e-mails • 54
MMS messages • 50
Funbox • 60
call records • 28
e-mails • 55
events • 65
memos • 67
charging • 7
missed alarms • 66
MMS messages • 49, 50
phonebook 33
photos • 73
low indicator • 8
precautions • 88
Bluetooth
G
receiving, data • 82
sending, data • 82
settings • 81
Games • 34
Greeting message • 75
photos • 67
videos • 70
SMS messages • 46
video clips • 74
Delivery reports, message •
47, 51
Dialled calls • 29
Display
CB (Cell Broadcast) messages •
60
Characters, enter • 21
Conference call • 27
H
Broadcast messages • 60
Browser, WAP • 42
Health and safety • 87
Holding, call • 25
94
messages • 60
phonebook 34
scheduled events • 67
unpacking • 6
Phonebook
I
N
Icons, description • 10
Images, downloaded • 60
Inbox, messages
e-mail • 54
Names
copying • 31
deleting • 33
editing • 31
managing • 33
options • 31
entering • 21
searching • 30
Message tone • 77
Messages
cell broadcast • 60
Network band, select • 80
Network selection • 79
Network services • 78
MMS • 49
SMS • 45
e-mail • 53
greeting • 75
MMS • 48
SMS • 45
voice • 59
speed-dialling • 32
Infrared, connect • 83
International calls • 23
Internet • 42
O
Photos
Organiser • 62
Outbox, messages
e-mail • 55
MMS • 50
deleting • 73
taking • 67
viewing • 72
K
web • 59
Key tone volume • 77
Keypad tones
selecting • 77
sending • 26
Minute minder • 78
missed alarm events • 66
Missed calls • 29
MMS messages
creating/sending • 48
deleting • 49, 50
setting • 51
viewing • 49, 50
MP3 player • 36
Multi-party calls • 27
Music, downloaded • 61
Muting
PIN, change • 83
PIN2, change • 84
Power on/off tone • 77
Privacy • 84
SMS • 46
Own number • 33
P
Problems, solve • 85
L
Password
Language, select • 75
Last number, redial • 23
Locking
call barring • 79
phone • 84
Phone
R
Received calls • 29
Received messages
e-mail • 54
media contents • 84
phone • 83
SIM card • 84
care and maintenance •
92
display • 10
icons • 10
locking • 83
password • 84
resetting • 85
switching on/off • 8
MMS • 49
SMS • 45
Recording
videos • 70
voice memos • 38
Redialling
Loudspeaker • 25
Low battery indicator • 8
key tones • 26
microphone • 26
My name card • 33
M
Memory status
automatically • 75
downloaded items • 62
95
Index
manually • 23
Resetting phone • 85
Ringer
incoming calls • 77
messages • 77
Road safety • 89
Roaming • 79
Stopwatch • 41
Switching on/off
playing • 38
recording • 38
Voicemail server • 59
microphone • 26
phone • 8
W
T
Waiting call • 79
WAP browser
access • 42
bookmarks • 43
cache, clear • 43
World time • 39
Templates
MMS • 51
S
text • 59
Text input mode, change • 21
Text, enter • 21
Timer • 41
Safety
information • 87
Security, calls • 83
Sent messages
e-mail • 55
Tone
connect • 78
MMS • 49, 50
SMS • 46
SIM card
keypad • 77
message • 77
minute minder • 78
power on/off • 77
slide • 77
inserting • 7
locking • 84
Slide settings • 75
SMS messages
creating/sending • 45
deleting • 46
setting • 47
viewing • 45, 46
Sound settings • 77
Sounds, downloaded • 62
Speed-dial • 32
V
Videos
deleting • 74
playing • 73
recording • 70
Voice clarity, microphone • 26
Voice mail • 59
Voice memos
96
|