Nokia N2610 User Manual

User’s Guide for Nokia N2610

Java is a trademark of Sun Microsystems, Inc.

Nokia operates a policy of continuous development. Nokia reserves the

right to make changes and improvements to any of the products described

in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or

income or any special, incidental, consequential or indirect damages

howsoever caused.

The contents of this document are provided "as is". Except as required by

applicable law, no warranties of any kind, either express or implied,

including, but not limited to, the implied warranties of merchantability

and fitness for a particular purpose, are made in relation to the accuracy,

reliability or contents of this document. Nokia reserves the right to revise

this document or withdraw it at any time without prior notice.The

availability of particular products may vary by region. Please check with

the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to

export laws and regulations from the US and other countries. Diversion

contrary to law is prohibited.

Issue 1

Contents

Settings ........................................ 19

Operator menu........................... 24

Gallery........................................... 24

Media............................................ 25

Organiser...................................... 25

Applications ................................ 28

Web ............................................... 29

SIM services ................................ 32

For your safety................. iv

General information...... viii

Access codes............................... viii

Nokia support and contact

information .................................. ix

1. Get started.................... 1

Install the SIM card

and battery..................................... 1

Charge the battery....................... 3

Normal operating position ........ 4

6. Battery information... 33

Charging and discharging....... 33

Nokia battery authentication

guidelines..................................... 35

2. Your phone ................... 5

Keys and parts............................... 5

Standby mode ............................... 6

Demo mode.................................... 7

Keypad lock.................................... 7

7. Genuine

Enhancements............ 39

Power............................................ 40

Audio............................................. 43

3. Call functions............... 8

Make and answer a call ............. 8

Loudspeaker................................... 8

Care and maintenance... 44

Additional safety

information .................... 46

4. Write text ..................... 9

Index............................... 54

5. Menu functions......... 10

Messaging .................................... 10

Contacts........................................ 16

Log.................................................. 18

iii

For your safety

Read these simple guidelines. Not following them may be

dangerous or illegal. Read the complete user guide for further

information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use

is prohibited or when it may cause interference or

danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to

operate the vehicle while driving. Your first

consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to

interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near

medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause

interference in aircraft.

SWITCH OFF WHEN REFUELLING

Do not use the phone at a refuelling point. Do not

use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where

blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the

product documentation. Do not touch the antenna

unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this

product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries.

Do not connect incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written

record of all important information stored in your

phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user

guide for detailed safety instructions. Do not

connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

the end key as many times as needed to clear the

display and return to the start screen. Enter the

emergency number, then press the call key. Give

your location. Do not end the call until given

permission to do so.

■ About your device

The wireless device described in this guide is approved for use on

the GSM900 and GSM1800 network. Contact your service

provider for more information about networks.

When using the features in this device, obey all laws and respect

privacy and legitimate rights of others.

Warning: To use any features in this device, other than

the alarm clock, the device must be switched on. Do not

switch the device on when wireless device use may

cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service

provider. Many of the features in this device depend on features

in the wireless network to function. These network services may

not be available on all networks or you may have to make

specific arrangements with your service provider before you can

utilize network services. Your service provider may need to give

you additional instructions for their use and explain what

charges will apply. Some networks may have limitations that

affect how you can use network services. For instance, some

networks may not support all language-dependent characters

and services.

Your service provider may have requested that certain features

be disabled or not activated in your device. If so, they will not

appear on your device menu. Your device may also have been

specially configured. This configuration may include changes in

menu names, menu order and icons. Contact your service

provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run

on TCP/IP protocols. Some features of this device, such as text

messages, multimedia messages and content and application

download require network support for these technologies.

General information

■ Access codes

The security code supplied with the phone protect your phone

against unauthorized use. The preset code is 12345.

The PIN code supplied with the SIM card, protect the card

against unauthorized use. The PIN2 code supplied with some

SIM cards, is required to access certain services. If you enter the

PIN or PIN2 code incorrectly three times in succession, you are

asked for the PUK or PUK2 code. If you do not have them,

contact your local service provider.

The module PIN is required to access the information in the

security module of your SIM card. The signing PIN may be

required for the digital signature. The barring password is

required when using the Call barring service.

Select Menu > Settings > Security to set how your phone uses

the access codes and security settings.

■ Nokia support and contact information

For the latest version of this guide, downloads, services and

additional information related to your Nokia product, please

visit www.nokia-asia.com/N2610/support or your local Nokia

web site. You may also download free configuration settings

such as MMS, GPRS, e-mail, and other services for your phone

model at www.nokia-asia.com/phonesettings.

Should you still require assistance, please refer to

www.nokia-asia.com/contactus.

To check for the nearest Nokia care center location for

maintenance services, you may like to visit

www.nokia-asia.com/repair

G e t s t a r t e d

1. Get started

■ Install the SIM card and battery

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services,

contact your SIM card vendor. This may be the service provider,

network operator, or other vendor.

Always switch the device off and disconnect the charger before

removing the battery.

Note: Always switch off the power and disconnect the

charger and any other device before removing the

covers. Avoid touching electronic components while

changing the covers. Always store and use the device

with the covers attached.

1. Press and slide the back cover toward the bottom of the

phone to remove the cover (1).

2. Remove the battery by lifting it as shown (2).

3. Carefully lift the SIM card holder from the finger grip of the

phone, and open the flip cover (3).

G e t s t a r t e d

4. Insert the SIM card, so that the bevelled corner is on the

upper right side and the gold-colored contact area

downward (4). Close the SIM card holder, and press it to lock

it into place (5).

5. Insert the battery into the battery slot (6).

6. Align the back cover with the back of the phone, and slide it

upwards. Push the back cover up to the top of the phone to

lock it (7).

G e t s t a r t e d

■ Charge the battery

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this

particular model. The use of any other types may

invalidate any approval or warranty, and may be

dangerous.

Check the model number of any charger before use with this

device. This device is intended for use when supplied with power

from ACP-7, ACP-12 or AC-2 charger. This device is intended to

use the BL-5C battery. For availability of approved

enhancements, please check with your dealer.

1. Connect the charger to an ac wall

outlet.

2. Connect the charger to the phone.

G e t s t a r t e d

■ Normal operating position

Your device has an internal

antenna.

Note: As with any

other radio transmitting device, do not touch the

antenna unnecessarily when the device is switched

on. Contact with the antenna affects call quality and

may cause the device to operate at a higher power

level than otherwise needed. Avoiding contact with

the antenna area when operating the device optimizes

the antenna performance and the battery life.

Y o u r p h o n e

2. Your phone

■ Keys and parts

Note: The keymat may vary

according to different markets.

•

Earpiece (1)

Loudspeaker (2)

Selection key (3)

Navigation key (scroll key) (4)

Call key (5), press the call key

once to access the recently

dialed numbers

•

End key and power key (6), long

press to switch the phone on or

off, briefly press ends an active call, or exit from any

functions

•

Charger connector (7)

Headset connector (8)

Y o u r p h o n e

Note: Do not touch this connector as it is

intended for use by authorized service

personnel only.

Warning: The scroll key in this

device may contain nickel. It is not intended to come

into prolonged contact with the skin. Continuous

exposure to nickel on the skin may lead to nickel

allergy.

■ Standby mode

When the phone is ready for use, before you enter any

characters, the phone is in the standby mode:

Network name or the operator logo (1)

Network signal strength (2)

Battery charge level (3)

The left selection key is Go to (4) for you to

view the functions in your personal

shortcut list. Select Options > Select

options to view the list of available functions that you can add in

Y o u r p h o n e

the options list. Select the function Organise > Move and the

location to rearrange the functions of your shortcut list.

Menu (5) and Audio (6)

■ Demo mode

You can start up the phone without the SIM card by accepting

Start up phone without SIM card? and use those features of the

phone that do not require the SIM card.

■ Keypad lock

Select Menu > * quickly to lock or unlock the keypad to prevent

the keys from being accidentally pressed. To answer a call when

the keyguard is on, press the call key. When you end or reject the

call, the keypad remains locked.

Select Menu > Settings > Phone settings > Automatic keyguard >

On to set the keypad to lock automatically after a preset time

delay when the phone is in the standby mode and no function of

the phone has been used.

When the keypad lock is on, calls still may be possible to the

official emergency number programmed into your device.

C a l l f u n c t i o n s

3. Call functions

■ Make and answer a call

To make a call, enter the phone number including the area code

if necessary. The country code should be included, if necessary.

Press the call key to call the number. Scroll right to increase or

left to decrease the volume of the earpiece or headset during the

phone call.

To answer an incoming call, press the call key. To reject the call

without answering, press the end key.

■ Loudspeaker

If available, you may select Loudsp. or Normal to use the

loudspeaker or the earpiece of the phone during a call.

Warning: Do not hold the device near your ear when

the loudspeaker is in use, because the volume may be

extremely loud.

W r i t e t e x t

4. Write text

You can enter text in predictive text

and traditional text

input

. To use traditional text input, press the key

repeatedly until the letter appears. To turn on predictive text

input when writing, select Options > Prediction on; to turn it

off, select Options > Prediction off.

When using predictive text input to enter the word you want,

press each key once for a single letter, if the displayed word is

the one you want, press 0, and start writing the next word. To

change the word, press * repeatedly until the word you want

appears. If ? is displayed after the word, the word is not in the

dictionary. To add the word to the dictionary, select Spell, enter

the word (using traditional text input), and select Save.

Tips for writing text: to add a space, press 0. To quickly change

the text input method, press # repeatedly and check the

indicator at the top of the display. To add a number, press and

hold the desired number key. To get a list of special characters

when using traditional text input, press *; when using predictive

text input, press and hold *.

M e n u f u n c t i o n s

5. Menu functions

The phone functions are grouped into menus. Not all menu

functions or option items are described here.

In the standby mode, select Menu and the desired menu and

submenu. Select Exit or Back to exit the current level of menu.

Press the end key to return to the standby mode directly. To

change the menu view, select Options > Main menu view > List

or Grid.

■ Messaging

The message services can only be used if they are

supported by your network or service provider.

Settings for text and multimedia messages

Select Menu > Messaging > Message settings > Text messages >

Message centres. Your SIM card supports more than one

message center, select or add the one you want to use, you may

need to get the center number from your service provider.

M e n u f u n c t i o n s

Select Menu > Messaging > Message settings > Multimedia,

and the following settings:

Image size (multimedia), you can define the image size when

you insert the image into the multimedia message.

Allow multimedia reception, select No, Yes, or In home network

to use the multimedia service.

Configuration settings, select the default service provider for

retrieving multimedia messages. Scroll to Account to see the

accounts provided by the service provider and to select the one

you want to use. You may receive the settings as a configuration

message from the service provider.

Allow adverts, to choose whether you allow the reception of

messages defined as advertisements. This setting is not shown

if Allow multimedia reception is set to No.

Text messages (network service)

Select Menu > Messaging > Create message > Text message.

Using the short message service (SMS) your phone can send and

receive multipart messages, which consist of several ordinary

text messages. Invoicing may be based on the number of

ordinary messages that are required for a multipart message.

M e n u f u n c t i o n s

Note that using special (Unicode) characters take up more space.

The blinking

indicates that the message memory is full.

Before you can receive new messages, delete some of your old

messages.

Multimedia messages (MMS) (network service)

Select Menu > Messaging > Create message > Multimedia msg.

Note: Only devices that have compatible features can

receive and display multimedia messages. The

appearance of a message may vary depending on the

receiving device.

The wireless network may limit the size of MMS messages. If the

inserted picture exceeds this limit, the device may make it

smaller so that it can be sent by MMS.

A multimedia message can contain text, sound, and a picture.

You can not receive any multimedia messages if you have a

call in progress, or a game or another Java application running.

Because delivery of multimedia messages can fail for a variety

of reasons, do not rely solely upon them for essential

communications.

M e n u f u n c t i o n s

including ringing tones, and other content from being copied,

modified, transferred or forwarded.

Your phone supports the sending and receiving of multimedia

messages that contain several pages (slides). To insert a slide in

the message, select Options > Insert > Slide. To set the interval

between the slides, select Slide timing.

When you have a new multimedia message waiting and the

memory for the messages is full,

blinks and Memory full.

Unable to receive msgs. is shown. To receive the message, select

OK > Yes and the folder to delete old messages.

Flash messages (network service)

Flash messages are text messages that are instantly displayed.

Select Menu > Messaging > Create message > Flash message.

Note: Only devices that offer compatible flash message

features can receive and display blinking flash messages.

M e n u f u n c t i o n s

Audio message

You can use the multimedia message service to create and send

a voice message. Multimedia messaging service must be

activated before you can use audio messages.

Select Menu > Messaging > Create message > Audio message.

The recorder opens. When you finish recording an audio

message, enter the recipient’s phone number in the To: field to

send the message. To view the available options, select Options.

To retrieve a phone number from Contacts, select Add >

Contact.

When your phone receives audio messages, 1 audio message

received or the number of messages and the text messages

received is shown. To open the message, select Play; or if more

than one message is received, select Show > Play. To listen to

the message later, select Exit. Select Options to see the

available options. The audio message is played through earpiece

by default, select Options > Loudspeaker to choose loudspeaker

to play if you want.

M e n u f u n c t i o n s

Voice messages

The voice mailbox is a network service and you may need to

subscribe to it. Contact your service provider for voice mailbox

number and detailed information.

Select Menu > Messaging > Voice messages.

E-mail application

The e-mail application (network service) allows you to access

your compatible e-mail account from your phone. Before you

can send and retrieve any e-mail, you may need to obtain an

e-mail account and the settings required. You may receive the

e-mail configuration settings as a configuration message.

To write and send an e-mail, select Menu > Messaging >

E-mail > Write new e-mail. If more than one e-mail account is

defined, select the account from which you want to send the

e-mail. To attach a file to the e-mail, select Options > Attach

file and the file in Gallery. When you finish entering the e-mail

message, select Send > Send now.

To download e-mail messages that have been sent to you, select

Menu > Messaging > E-mail > Check new e-mail and the

account you want, only e-mail headers are downloaded at first.

To download the complete e-mail message, select Back >

M e n u f u n c t i o n s

Inboxes and the account you want, select the new message and

Retrieve.

Important: Exercise caution when opening messages.

E-mail messages may contain malicious software or

otherwise be harmful to your device or PC.

Your phone saves e-mail that you have downloaded from your

e-mail account in the Inboxes folder, other folders may be:

Drafts for saving unfinished e-mail, Archive for organizing and

saving your e-mail, Outbox for saving e-mail that has not been

sent, and Sent items for saving e-mail that has been sent. To

manage the folders and their e-mail content, select Options to

view the available options of each folder.

■ Contacts

You can save names and phone numbers in

the phone memory and in the SIM card

memory. The phone memory may save

contacts with numbers and text items. Names and numbers

saved in the SIM card memory, are indicated by

M e n u f u n c t i o n s

To search a contact, select Menu> Contacts > Names > Options >

Search. Scroll through the list of contacts or enter the first letter

of the name you are searching for. To add a new contact, select

Menu > Contacts > Names > Options > Add new contact. To add

more details to a contact, make sure that the memory in use is

either Phone or Phone and SIM. Scroll to the name which you

want to add a new number or text item, and select Details >

Options > Add detail. To copy a contact, select Options > Copy

contact. You can copy names and phone numbers between the

phone contact memory and the SIM card memory. The SIM card

memory can save names with one phone number attached to

them. To assign a number to a speed-dialing key, select Menu >

Contacts > Speed dials, and scroll to the speed-dialing number

that you want.

You can send and receive a person’s contact information from a

compatible device that supports the vCard standard as a

business card. To send a business card, search for the contact

whose information you want to send, and select Options > Send

bus. card > Via multimedia or Via text message. When you

receive a business card, select Show > Save to save the business

card in the phone memory. To discard the business card, select

Exit > Yes.

M e n u f u n c t i o n s

Select Menu > Contacts > Settings to set the following for

contacts: Memory in use to select SIM card or phone memory for

your contacts. To recall names and number from both memories,

select Phone and SIM. To select how the names and numbers in

contacts are displayed, select Contacts view. To view the free

and used memory capacity, select Memory status.

■ Log

The phone registers the missed, received,

and dialed call numbers, and the

approximate length of your calls (network

service). The network must support these functions, and the

phone must be switched on and inside the network service area.

Select Menu > Log > Call duration, Packet data counter, or

Packet data connection timer for approximate information on

your recent communications.

Note: The actual invoice for calls and services from

your service provider may vary, depending upon

network features, rounding off for billing, taxes and so

forth.

M e n u f u n c t i o n s

Select Menu > Log and the appropriate list: Missed calls displays

the list of phone numbers from which somebody has tried to call

you and the amount of calls from that caller, Received calls

displays the list of recently accepted or rejected calls, Dialled

numbers displays the list of recently called.

Clear log lists deletes the recent calls lists. You cannot undo this

operation.

You can view the date and the time of the call, edit or delete

the phone number from the list, save the number in Contacts,

or send a message to the number.

■ Settings

You can adjust various phone settings in this

menu. To reset some of the menu settings to

their original values, select Menu > Settings >

Restore factory sett..

Tone settings

Select Menu > Settings > Tones, and change any of the available

options. Your phone supports MP3 format ringing tones, you can

also set your recordings as ringing tones.

M e n u f u n c t i o n s

Select Alert for to set the phone to ring only a selected caller

group. Scroll to the caller group you want to select or choose

All calls > Mark.

My shortcuts

With personal shortcuts you get quick access to frequently used

phone functions.

Select Menu > Settings > My shortcuts > Right selection key to

allocate one phone function to the right selection key.

Select Menu > Settings > My shortcuts > Navigation key to

select shortcut functions for the navigation key. Scroll to the

desired navigation key, select Change and a function from the

list. To remove a shortcut function from the key, select (empty).

To reassign a function for the key, select Assign.

Call and phone settings

Select Menu > Settings > Call and one of the options:

Call divert (network service) to divert your incoming calls. For

details, contact your service provider

Automatic redial > On to make ten attempts to connect the call

after an unsuccessful attempt

M e n u f u n c t i o n s

Call waiting > Activate so that the network will notify you of an

incoming call while you have a call in progress (network service).

Send my caller ID (network service) > Set by network, Yes or No.

Select Menu > Settings > Phone > Language settings > Phone

language to set the display language of your phone. If you select

Automatic the phone selects the language according to the

information on the SIM card.

Display, time and date settings

Select Menu > Settings > Display > Power saver > On to save

some battery power. A digital clock is displayed when no

function of the phone is used for a certain time.

Select Menu > Settings > Time and date. Scroll to Clock to

select to show the clock in the standby mode, adjust the clock,

and select the time zone and the time format. Scroll to Date to

show the date in the standby mode, set the date, and select the

date format and date separator. Scroll to Auto-update of date

& time (network service) to set the phone to update the time

and date automatically according to the current time zone.

M e n u f u n c t i o n s

Connectivity - GPRS connection

General Packet Radio Service (GPRS) (network service) is a data

bearer that enables wireless access to data networks such as the

Internet. The applications that may use GPRS are MMS,

browsing, and Java application downloading.

Before you can use GPRS technology, contact your network

operator or service provider for availability of and subscription

to the GPRS service. Save the GPRS settings for each of the

applications used over GPRS. For information on pricing, contact

your network operator or service provider.

Select Menu > Settings > Connectivity > Packet data > Packet

data connection. Select Always online to set the phone to

automatically register to a GPRS network when you switch the

phone on. Select When needed, and the GPRS registration and

connection are established when an application using GPRS

needs it and closed when you end the application.

Enhancement settings

The compatible mobile enhancement item is shown only if the

phone is or has been connected to it.

M e n u f u n c t i o n s

Select Menu > Settings > Enhancement settings and the

available enhancement. If available, for example, you once

connected headset to your phone, you may select Automatic

answer to set the phone to answer an incoming call

automatically. If the Incoming call alert is set to Beep once or

Off, automatic answer will not be in use.

Configuration settings

Some of the network services need to have the correct

configuration settings on your phone. Get the settings from your

SIM card, a service provider as a configuration message, or enter

your personal settings manually.

Select Menu > Settings > Configuration and the following:

Default configu- ration settings to view the list of service

providers stored on the phone (the default service provider is

highlighted) and to select another service provider as default.

Scroll to a provider and select Details to view the list with

supported applications; Activate default in all applications to

set the applications to use the settings from the default service

provider; Preferred access point to select another access point,

normally the access point from your preferred network

operator is to be used; Connect to service provider support to

download the configuration settings from your service

provider.

M e n u f u n c t i o n s

To enter, view, and edit the settings manually, select Menu >

Settings > Configuration > Personal configu- ration settings.

■ Operator menu

This menu lets you access a portal to services provided by your

network operator. This menu is operator specific. The name and

the icon depend on the operator. The operator can update this

menu with a service message. For more information, contact

your network operator.

■ Gallery

In this menu, you can manage themes,

graphics, recordings, and tones. These files

are arranged in folders.

Your phone supports a digital rights management (DRM) system

to protect acquired content. Always check the delivery terms of

any content and activation key before acquiring them, as they

may be subject to a fee.

Select Menu > Gallery, Themes, Graphics, Tones, Music files,

Recordings and Receiv. files are the original folders.

M e n u f u n c t i o n s

■ Media

Voice recorder

You can record pieces of speech, sound, or

an active call. This is useful for recording a name and phone

number to write them down later. The recorder cannot be used

when a data call or GPRS connection is active.

Select Menu > Media > Recorder > Voice recorder to start

recording. To start the recording during a call, select Options >

Record. When you record a call, hold the phone in the normal

position near to your ear. The recording is saved in Gallery >

Recordings. To listen to the latest recording, select Options >

Play last recorded. To send the last recording using a multimedia

message, select Options > Send last recorded.

■ Organiser

Alarm clock and calendar

You can set the phone to sound an alarm at a desired time.

Select Menu > Organiser > Alarm clock, scroll to Alarm time to

set the time for the alarm. Scroll to Repeat alarm to set the

M e n u f u n c t i o n s

phone to alert you on selected days of the week and Alarm tone

to select or personalize the alarm tone. To set the time out for

the snooze alert, select Snooze time-out and the time.

The phone will sound an alert tone, and flash Alarm! and the

current time on the display, even if the phone was switched off.

Select Stop to stop the alarm. If you let the phone continue to

sound the alarm for a minute or select Snooze, the alarm stops

for about 10 minutes then resumes.

If the alarm time is reached while the device is switched off, the

device switches itself on and starts sounding the alarm tone. If

you select Stop, the device asks whether you want to activate

the device for calls. Select No to switch off the device or Yes to

make and receive calls. Do not select Yes when wireless phone

use may cause interference or danger.

Select Menu > Organiser > Calendar, the current day is

indicated by a frame. If there are any notes set for the day, the

day is in bold type. To view the notes, select View. To delete all

notes in the calendar, select the month, and Options > Delete all

notes. Other options may be creating, deleting, editing, moving a

note, or copying a note to another day, sending a note directly to

another compatible phone calendar, as a text message or a

multimedia message.

M e n u f u n c t i o n s

Calculator

The calculator in your phone adds, subtracts, multiplies, divides,

calculates the square and the square root, and converts currency

values.

Note: This calculator has limited accuracy and is

designed for simple calculations.

Select Menu > Organiser > Calculator. When 0 is displayed on

the screen, enter the first number in the calculation. Press # for

a decimal point. Select Options > Add, Subtract, Multiply,

Divide, Square, Square root, or Change sign. Enter the second

number. To get the answer, select Equals. To start a new

calculation, first press and hold Clear.

To perform a currency conversion, select Menu > Organiser >

Calculator. To save the exchange rate, select Options >

Exchange rate. Select either of the displayed options. Key in the

exchange rate, press # for a decimal point, and select OK. To

perform the currency conversion, key in the amount to be

converted, select Options > In domestic or In foreign.

Note: When you change base currency, you must enter

new exchange rates because all previously set exchange

rates are cleared.

M e n u f u n c t i o n s

■ Applications

Your phone software may include some

games and Java applications specially

designed for this Nokia phone.

To view the amount of memory available for game and

application installations, select Menu > Applications > Options >

Memory status. To launch a game or an application, select

Menu > Applications > Games, or Collection. Scroll to a game or

an application, and select Open. To download a game or an

application, select Menu > Applications > Options > Downloads >

Game downloads or App. downloads. Your phone supports

J2ME^TMJava applications. Make sure that the application is

compatible with your phone before downloading it.

Important: Only install applications from sources that

offer adequate protection against harmful software.

Note that when downloading an application, it may be saved in

the Games menu instead of the Applications menu.

M e n u f u n c t i o n s

■ Web

You can access various mobile Internet

services with your phone browser. Check the

availability of these services, pricing, and tariffs with your

network operator or the service provider.

Important: Use only services that you trust and that

offer adequate security and protection against harmful

software.

Service connection and browse the service pages

Make sure that service settings are saved and activated.

Make a connection to the service, open the start page, for

example, the home page of the service provider Menu > Web >

Home, or in the standby mode press and hold 0. You can select a

bookmark Menu > Web > Bookmarks. If the bookmark does not

work with the current active service settings, activate another

set of service settings and try again. You can also select the last

URL Menu > Web > Last web addr., or enter the address of the

service by selecting Menu > Web > Go to address and select OK.

To quit browsing and to end the connection, select Options >

Quit. Alternatively, press the end key twice, or press and hold the

end key.

M e n u f u n c t i o n s

After you connect to the service, you can browse its pages. The

function of the phone keys may vary in different services. Follow

the text guides on the phone display.

Note that if GPRS is selected as the data bearer, the indicator

is shown on the top left of the display during browsing. If you

receive a call or a text message, or make a call during a GPRS

connection, the indicator

will be shown on the top left of the

display to indicate that the GPRS connection is suspended (on

hold). After a call, the phone tries to reconnect the GPRS

connection.

While you are browsing, options such as Home and Bookmarks

may be available. The service provider may offer additional

options.

Your device may have some bookmarks loaded for sites not

affiliated with Nokia. Nokia does not warrant or endorse these

sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any

Internet site.

Browser appearance settings

In the standby mode, select Menu > Web > Settings >

Appearance settings. Select Text wrapping > On to allow the text

to continue on the next line. If you select Off, the text will be

M e n u f u n c t i o n s

abbreviated. Select Show images > No, and any pictures

appearing on the page are not shown. Select Alerts > Alert for

unsecure connection > Yes to set the phone to alert when a

secure connection changes to an insecure one during browsing.

Select Alert for unsecure items > Yes to set the phone to alert

when a secure page contains an insecure item. These alerts do

not guarantee a secure connection. Select Character encoding

to select the character set for showing browser pages that do

not include that information or to select whether to always use

UTF-8 encoding when sending a Web address to a compatible

phone.

Cookies and cache memory

A cookie is data that a site saves in your phone browser cache

memory. The data can be your user information or your

browsing preferences. Cookies are saved until you clear the

cache memory. In the standby mode, select Menu > Web >

Settings > Security settings > Cookies. Select Allow or Reject to

allow or prevent the phone from receiving cookies.

If you have tried to access or have accessed confidential

information requiring passwords, empty the cache after each

use. To empty the cache, in the standby mode, select Menu >

Web > Clear the cache.

M e n u f u n c t i o n s

Service inbox (network service)

The phone can receive service messages (pushed messages) sent

by your service provider. To read this service message, select

Show. If you select Exit the message is moved to the Service

inbox. Select Menu > Web > Settings > Service inbox settings >

Service messages > On (orOff )to set the phone to receive (or not

to receive) service messages.

Browser security

Security features may be required for some services, such as

banking services or online shopping. For such connections you

need security certificates and possibly a security module which

may be available on your SIM card. For more information,

contact your service provider.

■ SIM services

Your SIM card may provide additional services.

For information, contact your service provider.

B a t t e r y i n f o r m a t i o n

6. Battery information

■ Charging and discharging

Your device is powered by a rechargeable battery. The full

performance of a new battery is achieved only after two or three

complete charge and discharge cycles. The battery can be

charged and discharged hundreds of times, but it will eventually

wear out. When the talk and standby times are noticeably

shorter than normal, replace the battery. Use only Nokia

approved batteries, and recharge your battery only with Nokia

approved chargers designated for this device.

If a replacement battery is being used for the first time or if the

battery has not been used for a prolonged period, it may be

necessary to connect the charger then disconnect and reconnect

it to begin charging the battery.

Unplug the charger from the electrical plug and the device when

not in use. Do not leave a fully charged battery connected to a

charger, since overcharging may shorten its lifetime. If left

unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take a few

minutes before the charging indicator appears on the display or

before any calls can be made.

B a t t e r y i n f o r m a t i o n

Use the battery only for its intended purpose. Never use any

charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can

occur when a metallic object such as a coin, clip, or pen causes

direct connection of the positive (+) and negative (-) terminals

of the battery. (These look like metal strips on the battery.) This

might happen, for example, when you carry a spare battery in

your pocket or purse. Short-circuiting the terminals may

damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car

in summer or winter conditions, will reduce the capacity and

lifetime of the battery. Always try to keep the battery between

15°C and 25°C (59°F and 77°F). A device with a hot or cold

battery may not work temporarily, even when the battery is fully

charged. Battery performance is particularly limited in

temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode.

Batteries may also explode if damaged. Dispose of batteries

according to local regulations. Please recycle when possible.

Do not dispose as household waste.

B a t t e r y i n f o r m a t i o n

■ Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check

that you are getting an original Nokia battery, purchase it from

an authorized Nokia dealer, look for the Nokia Original

Enhancements logo on the packaging and inspect the hologram

label using the following steps:

Successful completion of the four steps is not a total assurance

of the authenticity of the battery. If you have any reason to

believe that your battery is not an authentic original Nokia

battery, you should refrain from using it, and take it to the

nearest authorized Nokia service point or dealer for assistance.

Your authorized Nokia service point or dealer will inspect the

battery for authenticity. If authenticity cannot be verified, return

the battery to the place of purchase.

Authenticate hologram

1. When looking at the hologram on

the label, you should see the Nokia

connecting hands symbol from one

angle and the Nokia Original

Enhancements logo when looking

from another angle.

B a t t e r y i n f o r m a t i o n

2. When you angle the hologram left,

right, down, and up, you should see

1, 2, 3, and 4 dots on each side

respectively.

3. Scratch the side of the label to

reveal a 20-digit code, for example,

12345678919876543210. Turn the

battery so that the numbers are

facing upwards. The 20-digit code

reads starting from the number at

the top row followed by the bottom

row.

4. Confirm that the 20-digit code is

valid by following the instructions at

www.nokiaoriginals.com/check.

B a t t e r y i n f o r m a t i o n

To create a text message enter the 20-digit code, for example,

12345678919876543210, and send to +44 7786 200276.

To create a text message,

•

For countries in Asia Pacific, excluding India: Enter the

20-digit code, for example, 12345678919876543210, and

send to +61 427151515.

•

For India only: Enter Battery followed by the 20-digit battery

code, for example, Battery 12345678919876543210, and

send to 5555.

National and international operator charges will apply.

You should receive a message indicating whether the code can

be authenticated.

If you need assistance confirming the battery code, contact your

local Nokia Care Centres listed at

www.nokia-asia.com/carecentrelocator

B a t t e r y i n f o r m a t i o n

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram

on the label is an authentic Nokia battery, please do not use the

battery. Take it to the nearest authorized Nokia service point or

dealer for assistance. The use of a battery that is not approved by

the manufacturer may be dangerous and may result in poor

performance and damage to your device and its enhancements.

It may also invalidate any approval or warranty applying to the

device.

To find out more about original Nokia batteries, visit

www.nokiaoriginals.com/battery.

G e n u i n e E n h a n c e m e n t s

7. Genuine Enhancements

A new extensive range of enhancements is

available for your phone. Select the

enhancements which accommodate your

specific communication needs.

Some of the enhancements are described

in detail below.

For availability of the enhancements, please check with your

local dealer.

A few practical rules about accessories and enhancements.:

•

Keep all accessories and enhancements out of the reach of

small children.

When you disconnect the power cord of any accessory or

enhancement, grasp and pull the plug, not the cord.

Check regularly that enhancements installed in a vehicle are

mounted and are operating properly.

Installation of any complex car enhancements must be made

by qualified personnel only.

G e n u i n e E n h a n c e m e n t s

Use only batteries, chargers and enhancements approved by

the phone manufacturer. The use of any other types may

invalidate any approval or warranty applying to the phone,

and may be dangerous.

■ Power

Type

Tech

Talk time*

Stand by time*

BL-5C

Li-ion Min 3 hours Min 300 hours

* Variation in operation times may occur depending on SIM card,

network and usage settings, usage style and environments. Use

of FM radio and integrated hands-free will affect talktime and

standby.

G e n u i n e E n h a n c e m e n t s

Standard Charger (ACP-7)

Small, lightweight and durable charger ACP-7 provides and

easy and convenient way to charge the phone. It is easy to

connect to phone or desktop stand.

Note: The plug types vary according to different markets.

G e n u i n e E n h a n c e m e n t s

Travel Charger (ACP-12)

Small, lightweight travel charger with multivoltage (100 - 240V)

switcher technology. Provides easy and convenient way to

charge the phone.

Note: The plug types vary according to different markets.

Nokia Mobile Charger LCH-12

Multi-voltage charger plugs into the cigarette lighter and

charges your phone battery.

G e n u i n e E n h a n c e m e n t s

■ Audio

Nokia Dual Headset HS-7

Comfortable handsfree operation with a remote control button

for answering and ending calls makes this headset convenient

and easy-to-use.

C a r e a n d m a i n t e n a n c e

Care and maintenance

Your device is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will

help you protect your warranty coverage.

•

Keep the device dry. Precipitation, humidity and all types of

liquids or moisture can contain minerals that will corrode

electronic circuits. If your device does get wet, remove the

battery and allow the device to dry completely before

replacing it.

•

Do not use or store the device in dusty, dirty areas. Its moving

parts and electronic components can be damaged.

Do not store the device in hot areas. High temperatures can

shorten the life of electronic devices, damage batteries, and

warp or melt certain plastics.

•

Do not store the device in cold areas. When the device

returns to its normal temperature, moisture can form inside

the device and damage electronic circuit boards.

•

Do not attempt to open the device other than as instructed

in this guide.

Do not drop, knock, or shake the device. Rough handling can

break internal circuit boards and fine mechanics.

C a r e a n d m a i n t e n a n c e

•

Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean the device.

Do not paint the device. Paint can clog the moving parts and

prevent proper operation.

Use only the supplied or an approved replacement antenna.

Unauthorized antennas, modifications, or attachments could

damage the device and may violate regulations governing

radio devices.

•

Use chargers indoors.

Always create a backup of data you want to keep (such as

contacts and calendar notes) before sending your device to a

service facility.

All of the above suggestions apply equally to your device,

battery, charger, or any enhancement. If any device is not

working properly, take it to the nearest authorized service

facility for service.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

Additional safety information

Your device and its enhancements may contain small parts.

Keep them out of the reach of small children.

■ Operating environment

Remember to follow any special regulations in force in any area,

and always switch off your device when its use is prohibited or

when it may cause interference or danger. Use the device only in

its normal operating positions. This device meets RF exposure

guidelines when used either in the normal use position against

the ear or when positioned at least 2.2 cm (7/8 Inch) from the

body. When a carry case, belt clip or holder is used for

body-worn operation, it should not contain metal and should

position the device the above-stated distance from your body.

In order to transmit data files or messages, this device requires a

good quality connection to the network. In some cases,

transmission of data files or messages may be delayed until such

a connection is available. Ensure the above separation distance

instructions are followed until the transmission is completed.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

Parts of the device are magnetic. Metallic materials may be

attracted to the device. Do not place credit cards or other

magnetic storage media near the device, because information

stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including

wireless phones, may interfere with the functionality of

inadequately protected medical devices. Consult a physician or

the manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any

questions. Switch off your device in health care facilities when

any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that

could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum

separation of 15.3 centimeters (6 inches) be maintained

between a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are

consistent with the independent research by and

recommendations of Wireless Technology Research. Persons

with pacemakers should:

A d d i t i o n a l s a f e t y i n f o r m a t i o n

•

Always keep the device more than 15.3 centimeters

(6 inches) from the pacemaker

•

Not carry the device in a breast pocket

Hold the device to the ear opposite the pacemaker to

minimize the potential for interference.

If you suspect interference, switch off your device and move the

device away.

Hearing aids

Some digital wireless devices may interfere with some hearing

aids. If interference occurs, consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles such as electronic

fuel injection systems, electronic antiskid (antilock) braking

systems, electronic speed control systems, air bag systems. For

more information, check with the manufacturer or its

representative of your vehicle or any equipment that has been

added.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

Only qualified personnel should service the device, or install the

device in a vehicle. Faulty installation or service may be

dangerous and may invalidate any warranty that may apply to

the device. Check regularly that all wireless device equipment in

your vehicle is mounted and operating properly. Do not store or

carry flammable liquids, gases, or explosive materials in the

same compartment as the device, its parts, or enhancements. For

vehicles equipped with an air bag, remember that air bags

inflate with great force. Do not place objects, including installed

or portable wireless equipment in the area over the air bag or in

the air bag deployment area. If in-vehicle wireless equipment is

improperly installed and the air bag inflates, serious injury could

result.

Using your device while flying in aircraft is prohibited. Switch

off your device before boarding an aircraft. The use of wireless

teledevices in an aircraft may be dangerous to the operation of

the aircraft, disrupt the wireless telephone network, and may be

illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially

explosive atmosphere and obey all signs and instructions.

Potentially explosive atmospheres include areas where you

A d d i t i o n a l s a f e t y i n f o r m a t i o n

would normally be advised to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting in

bodily injury or even death. Switch off the device at refuelling

points such as near gas pumps at service stations. Observe

restrictions on the use of radio equipment in fuel depots,

storage, and distribution areas, chemical plants or where

blasting operations are in progress. Areas with a potentially

explosive atmosphere are often but not always clearly marked.

They include below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas (such as

propane or butane), and areas where the air contains chemicals

or particles such as grain, dust, or metal powders.

■ Emergency calls

Important: Wireless phones, including this device,

operate using radio signals, wireless networks, landline

networks, and user-programmed functions. Because of

this, connections in all conditions cannot be

guaranteed. You should never rely solely on any

wireless device for essential communications like

medical emergencies.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate

signal strength.

Some networks may require that a valid SIM card is properly

inserted in the device.

2. Press the end key as many times as needed to clear the

display and ready the device for calls.

3. Enter the official emergency number for your present

location. Emergency numbers vary by location.

4. Press the call key.

If certain features are in use, you may first need to turn those

features off before you can make an emergency call. If the

device is in the offline or flight mode, you must change the

profile to activate the phone function before you can make an

emergency call. Consult this guide or your service provider for

more information.

When making an emergency call, give all the necessary

information as accurately as possible. Your wireless device may

be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

■ Certification information (SAR)

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR

EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is

designed and manufactured not to exceed the limits for

exposure to radio frequency (RF) recommended by international

guidelines (ICNIRP). These limits are part of comprehensive

guidelines and establish permitted levels of RF energy for the

general population. The guidelines were developed by

independent scientific organizations through periodic and

thorough evaluation of scientific studies. The guidelines include

a substantial safety margin designed to assure the safety of all

persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of

measurement known as the Specific Absorption Rate, or SAR.

The SAR limit stated in the international guidelines is 2.0 watts/

kilogram (W/kg)*. Tests for SAR are conducted using standard

operating positions with the device transmitting at its highest

certified power level in all tested frequency bands. Although the

SAR is determined at the highest certified power level, the

actual SAR of the device while operating can be well below the

maximum value. This is because the device is designed to

operate at multiple power levels so as to use only the power

A d d i t i o n a l s a f e t y i n f o r m a t i o n

required to reach the network. In general, the closer you are to a

base station, the lower the power output of the device.

The highest SAR value for this device when tested for use at the

ear is 0.56 w/kg.

SAR values may vary depending on national reporting and

testing requirements and the network band. Use of device

accessories and enhancements may result in different SAR

values. Additional SAR information may be provided under

product information at www.nokia-asia.com.

* The SAR limit for mobile devices used by the public is

2.0 W/kg averaged over 10 grams of body tissue. The guidelines

incorporate a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. SAR values may vary depending on national

reporting requirements and the network band. For SAR

information in other regions, please look under product

information at www.nokia.com.

Index

contact information ix

Contacts 16

About your device vi

Access codes viii

Additional safety

information 46

Applications 28

Audio 43

customer service ix

Demo mode 7

audio messages 14

Emergency calls 50

Battery 40

battery

For your safety iv

charging 33

discharging 33

information 33

Battery information

type 40

Gallery 24

General information viii

Genuine Enhancements 39

Get started 1

Call functions 8

Care and maintenance 44

Certification information

(SAR) 52

Install the SIM card and

battery 1

Charge the battery 3

Text messages (network

service) 11

Voice messages 15

Keypad lock 7

Keys and parts 5

Network services vii

Log 18

Nokia battery authentication

guidelines 35

Loudspeaker 8

Nokia contact information ix

Nokia Dual Headset HS-7 43

Nokia support ix

maintenance service ix

Make and answer a call 8

Medical devices 47

Hearing aids 48

Nokia support and contact

information ix

Normal operating position 4

Pacemakers 47

Menu functions 10

messages

audio messages 14

Messaging 10

Operating environment 46

Operator menu 24

Organiser 25

Audio message 14

E-mail application 15

Flash messages

(network service) 13

Multimedia messages

(MMS)

(network service) 12

Settings for text and

multimedia messages 10

Alarm clock

and calendar 25

Calculator 27

Potentially explosive

environments 49

repair service ix

Web 29

Browser appearance

settings 30

Browser security 32

Cookies and

Settings 19

Call and phone settings 20

Configuration settings 23

Connectivity - GPRS

connection 22

cache memory 31

Service connection and

browse the

service pages 29

Service inbox

Display, time and date

settings 21

(network service) 32

Enhancement settings 22

My shortcuts 20

Write text 9

Tone settings 19

SIM services 32

Standard Charger (ACP-7) 41

Standby mode 6

Your phone 5

support ix

Travel Charger (ACP-12) 42

Vehicles 48

Xpelair XIM100+ User Manual
Wadia Digital 830 User Manual
Sprint Nextel LX160 User Manual
Sony Xperia ZL 1270 6439 User Manual
Sony SCD XA777ES User Manual
Sony MZ M10 User Manual
Samsung T749 User Manual
Research In Motion Blackberry Cell Phone 8530 User Manual
Philips AJ 3950 User Manual
Palsonic CD6990DM3UC User Manual