Nokia LUNA 8600 User Manual

Nokia 8600 Luna User Guide  
9200818  
Issue 2  
Export controls  
This device may contain commodities, technology or software subject to export laws and regulations from  
the US and other countries. Diversion contrary to law is prohibited.  
FCC NOTICE  
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to  
receiving equipment). The FCC can require you to stop using your telephone if such interference cannot be  
eliminated. If you require assistance, contact your local service facility. This device complies with part 15  
of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) this device must accept any interference received, including interference  
that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could  
void the user's authority to operate this equipment.  
9200818/Issue 2  
C o n t e n t s  
Contents  
For your safety...................................................................................... 5  
General information............................................................................. 8  
1. Get started..................................................................................... 11  
2. Your phone .................................................................................... 18  
3. Call functions ................................................................................ 23  
4. Navigate the menus...................................................................... 25  
5. Write text........................................................................................ 26  
6. Messaging...................................................................................... 28  
7. Contacts......................................................................................... 46  
8. Call log........................................................................................... 52  
9. Settings.......................................................................................... 53  
10. Gallery........................................................................................... 68  
11. Media............................................................................................ 69  
12. Organiser...................................................................................... 75  
13. Applications ................................................................................. 79  
14. Web............................................................................................... 81  
15. SIM services.................................................................................. 88  
16. PC connectivity............................................................................ 89  
17. Battery information..................................................................... 90  
Care and maintenance ....................................................................... 93  
Additional safety information........................................................... 95  
Index.................................................................................................... 99  
4
F o r y o u r s a f e t y  
For your safety  
Read these simple guidelines. Not following them may be dangerous or illegal.  
Read the complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the phone on when wireless phone use is prohibited or  
when it may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the  
vehicle while driving. Your first consideration while driving should be  
road safety.  
INTERFERENCE  
All wireless phones may be susceptible to interference, which could  
affect performance.  
SWITCH OFF IN HOSPITALS  
Follow any restrictions. Switch the phone off near medical  
equipment.  
SWITCH OFF IN AIRCRAFT  
Follow any restrictions. Wireless devices can cause interference in  
aircraft.  
SWITCH OFF WHEN REFUELLING  
Do not use the phone at a refuelling point. Do not use near fuel or  
chemicals.  
SWITCH OFF NEAR BLASTING  
Follow any restrictions. Do not use the phone where blasting is in  
progress.  
USE SENSIBLY  
Use only in the normal position as explained in the product  
documentation. Do not touch the antenna unnecessarily.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and batteries. Do not connect  
incompatible products.  
5
 
F o r y o u r s a f e t y  
WATER-RESISTANCE  
Your phone is not water-resistant. Keep it dry.  
BACK-UP COPIES  
Remember to make back-up copies or keep a written record of all  
important information stored in your phone.  
CONNECTING TO OTHER DEVICES  
When connecting to any other device, read its user guide for detailed  
safety instructions. Do not connect incompatible products.  
EMERGENCY CALLS  
Ensure the phone is switched on and in service. Press the end key as  
many times as needed to clear the display and return to the start  
screen. Enter the emergency number, then press the call key. Give  
your location. Do not end the call until given permission to do so.  
About your device  
The wireless device described in this guide is approved for use on the EGSM 850,  
900, 1800, and 1900 networks. Contact your service provider for more  
information about networks.  
When using the features in this device, obey all laws and respect local customs,  
privacy and legitimate rights of others, including copyrights.  
Copyright protections may prevent some images, music (including ringing tones),  
and other content from being copied, modified, transferred, or forwarded.  
Your device supports internet connections and other methods of connectivity.  
Like computers, your device may be exposed to viruses, malicious messages and  
applications, and other harmful content. Exercise caution and open messages,  
accept connectivity requests, download content, and accept installations only  
from trustworthy sources. To increase the security of your device, consider  
installing antivirus software with a regular update service and using a firewall  
application.  
Warning: To use any features in this device, other than the alarm clock,  
the device must be switched on. Do not switch the device on when  
wireless device use may cause interference or danger.  
Network services  
To use the phone you must have service from a wireless service provider. Many of  
the features in this device depend on features in the wireless network to  
function. These network services may not be available on all networks or you may  
6
 
F o r y o u r s a f e t y  
have to make specific arrangements with your service provider before you can  
utilise network services. Your service provider may need to give you additional  
instructions for their use and explain what charges will apply. Some networks  
may have limitations that affect how you can use network services. For instance,  
some networks may not support all language-dependent characters and services.  
Your service provider may have requested that certain features be disabled or not  
activated in your device. If so, they will not appear on your device menu. Your  
device may also have been specially configured for your network provider. This  
configuration may include changes in menu names, menu order and icons.  
Contact your service provider for more information.  
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP  
protocols. Some features of this device, such as multimedia messaging (MMS),  
browsing, e-mail application, instant messaging, presence enhanced contacts,  
remote synchronization, and content downloading using the browser or MMS,  
require network support for these technologies.  
Shared memory  
The following features in this device may share memory: gallery, contacts, text  
messages, multimedia messages, and instant messages, e-mail, calendar, to-do  
notes, JavaTM games and applications, and note application. Use of one or more of  
thesefeaturesmayreducethememoryavailablefortheremainingfeaturessharing  
memory. For example, saving many Java applications may use all of the available  
memory. Your device may display a message that the memory is full when you try  
to use a shared memory feature. In this case, delete some of the information or  
entries stored in the shared memory features before continuing. Some of the  
features, such as text messages, may have a certain amount of memory specially  
allotted to them in addition to the memory shared with other features.  
Enhancements  
A few practical rules about accessories and enhancements are:  
Keep all accessories and enhancements out of the reach of small children.  
When you disconnect the power cord of any accessory or enhancement, grasp  
and pull the plug, not the cord.  
Check regularly that enhancements installed in a vehicle are mounted and  
are operating properly.  
Installation of any complex car enhancements must be made by qualified  
personnel only.  
7
   
G e n e r a l i n f o r m a t i o n  
Overview of functions  
Your phone provides many functions that are practical for daily use,  
such as text and multimedia messaging, calendar, clock, alarm clock,  
radio, music player, and built-in camera. Your phone also supports the  
following functions:  
• Plug and play online service to get the configuration settings. See  
Plug and play service p. 15, and Configuration settings service p. 9.  
• Active standby. See Active standby p. 20.  
• Audio messaging. See Nokia Xpress audio messaging p. 33.  
• Instant messaging. See Instant messaging p. 37.  
• E-mail application. See E-mail application p. 34.  
• Enhanced voice dialling. See Enhanced voice dialling p. 23 and Voice  
commands p. 57.  
• Presence-enhanced contacts. See My presence p. 48.  
• Java 2 Platform, Micro Edition (J2METM). See Applications p. 79.  
Access codes  
Security code  
The security code (5 to 10 digits) helps to protect your phone against  
unauthorised use. The preset code is 12345. To change the code, and to  
set the phone to request the code, see Security p. 65.  
PIN codes  
The personal identification number (PIN) code and the universal  
personal identification number (UPIN) code (4 to 8 digits) help to  
protect your SIM card against unauthorised use. See Security p. 65.  
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is  
required for some functions.  
8
         
G e n e r a l i n f o r m a t i o n  
The module PIN is required to access the information in the security  
module. See Security module p. 87.  
The signing PIN is required for the digital signature. See Digital  
signature p. 88.  
PUK codes  
The personal unblocking key (PUK) code and the universal personal  
unblocking key (UPUK) code (8 digits) is required to change a blocked  
PIN code and UPIN code, respectively. The PUK2 code (8 digits) is  
required to change a blocked PIN2 code. If the codes are not supplied  
with the SIM card, contact your local service provider for the codes.  
Barring password  
The barring password (4 digits) is required when using Call barring  
service. See Security p. 65.  
Configuration settings service  
To use some network services, such as mobile internet services, MMS,  
Nokia Xpress audio messaging, or remote internet server  
synchronization, the phone needs the correct configuration settings.  
You may be able to receive the settings directly as a configuration  
message. After receiving the settings, save them on your phone. Your  
service provider may provide a PIN number needed to save the settings.  
For more information on availability, contact your network operator,  
service provider, nearest authorised Nokia dealer, or visit the support  
area on the Nokia Web site, www.nokia.com/support.  
When you have received the settings as a configuration message, and  
the settings are not automatically saved and activated, Configuration  
settings received is displayed.  
To save the settings, select Show > Save. If the phone requests Enter  
settings' PIN:, enter the PIN code for the settings, and select OK. To  
receive the PIN code, contact the service provider that supplies the  
settings. If no settings are saved yet, these settings are saved and set as  
9
     
G e n e r a l i n f o r m a t i o n  
default configuration settings. Otherwise, the phone asks Activate saved  
configuration settings?.  
To discard the received settings, select Exit or Show > Discard.  
Download content  
You may be able to download new content (for example, themes) to the  
phone (network service). Select the download function (for example, in  
Gallery). To access the download function, see the respective menu  
descriptions.  
You may also be able to download updates of phone software (network  
service). See Phone p. 63, Phone updates.  
For the availability of different services, pricing, and tariffs, contact your  
service provider.  
Important: Use only services that you trust and that offer adequate  
security and protection against harmful software.  
Nokia support  
Check www.nokia.com/support or your local Nokia website for the latest  
version of this guide, additional information, downloads, and services  
related to your Nokia product.  
On the website, you can get information on the use of Nokia products  
and services. If you need to contact customer service, check the list of  
local Nokia Care contact centres at www.nokia.com/customerservice.  
For maintenance services, check your nearest Nokia service centre at  
www.nokia.com/repair.  
10  
   
G e t s t a r t e d  
1. Get started  
Important: The display cover (1) and keymat  
cover (2) of your device are fragile components  
made from specialised hardened glass that  
must be handled with care. Use the protective  
leather pouch included in the sales package.  
Install the SIM card and battery  
Always switch the device off and disconnect the charger before removing the  
battery.  
Keep all SIM cards out of the reach of small children.  
For availability and information on using SIM card services, contact your SIM  
card vendor. This may be the service provider, network operator, or other vendor.  
This device is intended for use with BP-5M battery. Always use original  
Nokia batteries. See Nokia battery authentication p. 91.  
The SIM card and its contacts can easily be damaged by scratches or  
bending, so be careful when handling, inserting, or removing the card.  
To remove the back cover of  
the phone, open the slide,  
press the cover release  
button (1) and slide the cover  
(2) as shown.  
11  
   
G e t s t a r t e d  
Remove the battery as  
shown.  
Insert the SIM card properly  
into the holder.  
Replace the battery with the  
gold-coloured contact end  
aligned with the gold-  
coloured contacts in the  
battery slot (1).  
Press the battery down into  
the battery slot (2).  
12  
G e t s t a r t e d  
Slide the back cover into  
place.  
Charge the battery  
Check the model number of any charger before use with this device. This device is  
intended for use when supplied with power from an AC-6 or DC-6 micro USB  
charger.  
Warning: Use only batteries, chargers, and enhancements approved by  
Nokia for use with this particular model. The use of any other types may  
invalidate any approval or warranty, and may be dangerous.  
For availability of approved enhancements, please check with your dealer. When  
you disconnect the power cord of any enhancement, grasp and pull the plug, not  
the cord.  
1. Connect the charger to  
a wall socket.  
2. Connect the lead from  
the micro USB charger  
to the micro USB socket  
on the lower right side  
of your phone.  
If the battery is completely  
discharged, it may take a  
few minutes before the  
charging indicator appears  
on the display or before any  
calls can be made.  
13  
 
G e t s t a r t e d  
The charging time depends on the charger used. Charging a BP-5M  
battery with the AC-6 charger takes approximately 2 hours and  
15 minutes while the phone is in the standby mode.  
Charge the battery with the CA-101 data cable  
The CA-101 data cable,  
included in the sales  
package, is used for data  
transfer and slow charging  
the battery while connected  
to a PC or laptop.  
See USB data cable, 62 for  
more information. You must  
download Nokia PC Suite  
6.83 to use with your  
device. Updated versions can be added after version 6.83. Go to  
www.nokia.com/support for more information.  
1. Connect the lead from the CA-101 to the micro USB socket on the  
lower right side of your phone.  
2. Connect the CA-101 to your PC or laptop. USB data cable connected.  
Select mode. appears on the display screen of your phone.  
3. Select OK and Default mode.  
The AC-6 charges the battery much faster than the CA-101. Charging  
with the AC-6 is recommended when short charging times are needed.  
14  
 
G e t s t a r t e d  
Switch the phone on and off  
Warning: Do not switch the phone  
on when wireless phone use is  
prohibited or when it may cause  
interference or danger.  
To switch the phone on or off, press and  
hold the power key.  
If the phone asks for a PIN or a UPIN  
code, enter the code (displayed as ****),  
and select OK.  
Set the time, time zone, and date  
Enter the local time, select the time zone of your location in terms of the  
time difference with respect to Greenwich Mean Time (GMT), and enter  
the date. See Time and date p. 56.  
Plug and play service  
When you switch on your phone for the first time, and the phone is in  
the standby mode, you are asked to get the configuration settings from  
your service provider (network service). Confirm or decline the query.  
See "Connect to serv. support," p. 65, and Configuration settings service  
p. 9.  
Digital rights management  
Content owners may use different types of digital rights management  
(DRM) technologies to protect their intellectual property, including  
copyrights. This device uses various types of DRM software to access  
DRM-protected content. With this device you may be able to access  
content protected with WMDRM 10, OMA DRM 1.0 forward lock, and  
OMA DRM 2.0. If certain DRM software fails to protect the content,  
content owners may ask that such DRM software’s ability to access the  
new DRM-protected content be revoked. Revocation may also prevent  
renewal of such DRM-protected content already in your device.  
Revocation of such DRM software does not affect the use of content  
15  
     
G e t s t a r t e d  
protected with other types of DRM or the use of non-DRM-protected  
content.  
Digital rights management (DRM) protected content comes with an  
associated activation key that defines your rights to use the content. If  
your device has OMA DRM protected content, to back up the content,  
use the backup feature of Nokia PC Suite. If your device has WMDRM  
protected content, both the activation keys and the content will be lost  
if the device memory is formatted. You may also lose the activation keys  
and the content in case the files on your device get corrupted. Losing the  
activation keys or the content may limit your ability to use the same  
content on your device again. For more information, contact your  
service provider.  
Connect a headset  
To connect an HS-47 stereo headset, an HS-40, HS-60, or HS-81  
headset to your device, you must use the microUSB-Nokia AV audio  
adapter AD-55. Connect the AD-55 adaptor to your device and a  
headset to the adaptor as shown.  
16  
G e t s t a r t e d  
Antenna  
Your device has an internal antenna located at the bottom of  
the device. Use the phone with the slide open to avoid contact  
with the antenna area.  
Note: As with any other radio  
transmitting device, do not touch the  
antenna unnecessarily when the device is  
switched on. Contact with the antenna  
affects call quality and may cause the  
device to operate at a higher power level  
than otherwise needed. Avoiding contact  
with the antenna area when operating  
the device optimises the antenna  
performance and the battery life.  
17  
 
Y o u r p h o n e  
2. Your phone  
Keys and parts  
1) Wrist strap eyelet  
2) Earpiece  
8) End key and power key  
9) Keypad  
3) Volume key  
4) Loudspeaker  
5) Display  
10) Battery cover release button  
11) Microphone  
12) Micro USB charger connection  
13) Call key  
TM  
6) Navi key  
7) Right selection key  
14) Left selection key  
18  
   
Y o u r p h o n e  
Open and close the phone  
To open the phone, push the slide up using the tab  
located just above the 4-way scroll key.  
To close the phone, push the tab down to the closed  
position.  
To answer calls by opening the slide and end calls by  
closing the slide, see Slide call handling in Call p. 62.  
Standby mode  
When the phone is ready for use, and you have not  
entered any characters, the phone is in the standby  
mode.  
Display  
1 Signal strength of the cellular network  
2 Battery charge status  
3 Indicators  
4 Name of the network or the operator logo  
5 Clock  
6 Main screen  
7 Function of the left selection key is Go to  
or a shortcut to another function. See Left  
selection key p. 56.  
8 Function of the middle selection key is Menu  
9 Function of the right selection key is Names or a shortcut to another  
function. See Right selection key p. 57.  
Operator variants may have an operator-specific name to access an  
operator-specific website.  
19  
         
Y o u r p h o n e  
Active standby  
In the active standby mode there is a list of selected phone features and  
information on the screen that you can directly access in the standby  
mode. To switch on the mode, select Menu > Settings > Main display >  
Standby mode settings > Active standby > My active standby. In the  
standby mode, scroll up or down to activate navigation in the list. To  
start the feature, select Select; or to display the information, select  
View. Left and right arrows at the beginning and end of a line indicate  
that further information is available by scrolling left or right. To end the  
active standby navigation mode, select Exit.  
To organise and change the active standby mode, activate the  
navigation mode, and select Options > Active standby > My active  
standby > Options and the following options:  
Personalise — Assign or change phone features in the standby mode.  
Organise — Move the position of features in the standby mode.  
Enabling active standby — Select keys to activate the standby  
navigation mode. To change the settings, see Standby mode settings  
p. 54.  
To switch off the active standby mode select Options > Active  
standby > Off; or select Menu > Settings > Display > Standby mode  
settings > Active standby > Off.  
Shortcuts in the standby mode  
• To access the list of dialled numbers, press the call key once. Scroll to  
the number or name that you want; and to call the number, press the  
call key.  
• To open the web browser, press and hold 0.  
• To call your voice mailbox, press and hold 1.  
• Use the navigation key as a shortcut. See My shortcuts p. 56.  
• In camera mode press the volume keys to zoom in or out.  
• To open the Nokia website, press and hold *.  
• To switch calls when line 1 and 2 are active, press #.  
20  
   
Y o u r p h o n e  
Indicators  
You have unread messages in the Inbox folder.  
You have unsent, canceled or failed messages in the Outbox  
folder.  
The phone registered a missed call.  
,
Your phone is connected to the instant messaging service, and  
the availability status is online or offline.  
You received one or several instant messages, and you are  
connected to the instant messaging service.  
The keypad is locked.  
The phone does not ring for an incoming call or text message.  
The alarm clock is set to On.  
The countdown timer is running.  
The stopwatch is running in the background.  
The phone is in flight mode.  
,
The phone is registered to the GPRS or EGPRS network.  
A GPRS or EGPRS connection is established.  
,
,
The GPRS or EGPRS connection is suspended (on hold), for  
example, if there is an incoming or outgoing call during an  
EGPRS dial-up connection.  
A Bluetooth connection is active.  
If you have two phone lines, the second phone line is selected.  
All incoming calls are diverted to another number.  
The loudspeaker is activated.  
21  
 
Y o u r p h o n e  
Calls are limited to a closed user group.  
The timed profile is selected.  
A headset or handsfree enhancement is connected to the  
phone.  
Keypad lock (keyguard)  
To prevent the keys from being accidentally  
pressed, select Menu, and press * within  
3.5 seconds to lock the keypad. When the  
slide is open, close the slide and select Lock.  
To unlock the keypad, select Unlock, and  
press * within 1.5 seconds. If the Security  
keyguard is set On, enter the security code if  
requested.  
To unlock the keypad with the slide closed, select Unlock > OK, or open  
the slide to automatically unlock the keypad.  
To answer a call when the keyguard is on, press the call key. When you  
end or reject the call, the keypad automatically locks.  
For Security keyguard, see Phone p. 63.  
When the keyguard is on, calls still may be possible to the official emergency  
number programmed into your device.  
Functions without a SIM card  
Several functions of your phone may be used without installing a SIM  
card (for example, the data transfer with a compatible PC or another  
compatible device). Note that when you use the phone without a SIM  
card, some functions appear dimmed in the menus and cannot be used.  
Synchronizing with a remote internet server is not possible without a  
SIM card.  
For an emergency call, some networks may require that a valid SIM card is  
properly inserted in the device.  
22  
   
C a l l f u n c t i o n s  
3. Call functions  
Make a call  
1. Enter the phone number, including the area code.  
For international calls, press * twice for the international prefix (the  
+ character replaces the international access code), enter the  
country code, the area code without the leading 0, if necessary, and  
the phone number.  
2. To call the number, press the call key.  
3. To end the call or to cancel the call attempt, press the end key.  
To search for a name or phone number that you have saved in Contacts,  
see Search for a contact p. 46. Press the call key to call the number.  
To access the list of dialled numbers, press the call key once in the  
standby mode. To call the number, select a number or name, and press  
the call key.  
Speed dialling  
Assign a phone number to one of the speed-dialling keys, 2 to 9. See  
Speed dials p. 51. Call the number in either of the following ways:  
• Press a speed-dialling key, then the call key.  
• If Speed dialling is set to On, press and hold a speed-dialling key until  
the call begins. See Speed dialling in Call p. 62.  
Enhanced voice dialling  
You can make a phone call by saying the name that is saved in the  
contact list of the phone. A voice command is added automatically to all  
entries in the contact list of the phone.  
If an application is sending or receiving data using a packet data  
connection, end the application before you use voice dialling.  
Voice commands are language-dependent. To set the language, see  
Voice playback language in Phone p. 63.  
23  
       
C a l l f u n c t i o n s  
Note: Using voice tags may be difficult in a noisy environment or  
during an emergency, so you should not rely solely upon voice dialling  
in all circumstances.  
1. In the standby mode, press and hold the right selection key or press  
and hold the volume down key. A short tone is played, and Speak now  
is displayed.  
If you are using a compatible headset with the headset key, press and  
hold the headset key to start the voice dialling.  
2. Say the voice command clearly. If the voice recognition is successful,  
a list with matches is shown. The phone plays the voice command of  
the match on the top of the list. After about 1.5 seconds, the phone  
dials the number. If the result is not the correct one, scroll to another  
entry, and select to dial the entry.  
Using voice commands to carry out a selected phone function is  
similar to voice dialling. See Voice commands in My shortcuts p. 56.  
Answer or reject a call  
To answer an incoming call, press the call key, or open the phone. To end  
the call, press the end key or close the phone.  
To reject an incoming call, press the end key, or select Silence > Reject.  
To mute the ringing tone, select Silence.  
Tip: If the Divert if busy function is activated to divert the calls  
(for example, to your voice mailbox), rejecting an incoming call  
also diverts the call. See Call p. 62.  
If a compatible headset supplied with the headset key is connected to  
the phone, to answer and end a call, press the headset key.  
Call waiting  
To answer the waiting call during an active call, press the call key. The  
first call is put on hold. To end the active call, press the end key.  
To activate the Call waiting function, see Call p. 62.  
24  
   
N a v i g a t e t h e m e n u s  
Options during a call  
Many of the options that you can use during a call are network services.  
For availability, contact your service provider.  
During a call, select Options and from the following options:  
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,  
Loudspeaker or Handset.  
Network services options are Answer or Reject, Hold or Unhold, New  
call, Add to conference, End call, End all calls, and the following:  
Send DTMF — to send tone strings  
Swap — to switch between the active call and the call on hold  
Transfer — to connect a call on hold to an active call and disconnect  
yourself  
Conference — to make a conference call that allows up to five persons to  
take part in a conference call  
Private call — to discuss privately in a conference call  
Warning: Do not hold the device near your ear when the loudspeaker is  
in use, because the volume may be extremely loud.  
4. Navigate the menus  
The phone offers you an extensive range of functions, which are  
grouped into menus.  
1. To access the menu, select Menu.  
To change the menu view, select Options > Main menu view > List,  
Grid, Grid with labels, or Tab.  
To rearrange the menu, scroll to the menu you want to move, and  
select Options > Organise > Move. Scroll to where you want to  
move the menu, and select OK. To save the change, select Done >  
Yes.  
2. Scroll through the menu, and select an option (for example,  
Settings).  
25  
   
W r i t e t e x t  
3. If the selected menu contains further submenus, select the one that  
you want (for example, Call).  
4. If the selected menu contains further submenus, repeat step 3.  
5. Select the setting of your choice.  
6. To return to the previous menu level, select Back. To exit the menu,  
select Exit.  
5. Write text  
You can enter text (for example, when writing messages) using  
traditional or predictive text input. When you write text, text input  
indicators appear at the top of the display.  
input. indicates predictive text input. Predictive text input allows  
you to write text quickly using the phone keypad and a built-in  
indicates traditional text  
dictionary. You can enter a letter with a single keypress.  
predictive text input with Word suggestions. The phone predicts and  
completes the word before you enter all the characters.  
indicates  
,
, or  
appears next to the text input indicator, indicating  
the character case. To change the character case, press #.  
indicates number mode. To change from the letter to number mode,  
press and hold #, and select Number mode.  
To set the writing language while writing text, select Options > Writing  
language. Or, press an hold # and select Writing language.  
Predictive text input  
To set predictive text input on, select Menu > Messaging > Create  
message. Select the type of message and Options > Prediction on.  
Tip: To quickly set predictive text input on or off when writing  
text, press # twice, or select and hold Options.  
1. Start writing a word using the 2 to 9 keys. Press each key only once  
for one letter. The entered letters are displayed underlined.  
26  
   
W r i t e t e x t  
The phone starts to predict the word you are writing. After you enter  
a few letters, and if these entered letters are not a word, the phone  
tries to predict longer words. Only the entered letters are displayed  
underlined.  
To insert a special character, press and hold *, or select Options >  
Insert symbol. Scroll to a character, and select Use.  
To write compounds words, enter the first part of the word; to  
confirm it, press the navigation key right. Write the next part of the  
word and confirm the word.  
To enter a full stop, press 1.  
2. When you finish writing the word and it is correct, to confirm it,  
press 0 to add space.  
If the word is not correct, press * repeatedly, or select Options >  
Matches. When the word that you want appears, select the word.  
If the ? character is displayed after the word, the word you intended  
to write is not in the dictionary. To add the word to the dictionary,  
select Spell. Complete the word (traditional text input is used), and  
select Save.  
Traditional text input  
To set traditional text input on, select Options > Prediction off.  
Press a number key, 1 to 9, repeatedly until the desired character  
appears. Not all characters available under a number key are printed on  
the key. The characters available depend on the selected writing  
language.  
If the next letter you want is located on the same key as the present one,  
wait until the cursor appears, or briefly press any of the scroll keys and  
enter the letter.  
The most common punctuation marks and special characters are  
available under the 1 key. For more characters, press *.  
27  
 
M e s s a g i n g  
6. Messaging  
You can read, write, send, and save text, multimedia, e-  
mail, audio, and flash messages and postcards. All messages are  
organised into folders.  
Text messages (SMS)  
With the short message service (SMS) you can send and receive text  
messages, and receive messages that can contain pictures (network  
service).  
Before you can send any text or SMS e-mail message, you must save  
your message centre number. See Message settings p. 43.  
To check SMS e-mail service availability and to subscribe to the service,  
contact your service provider. To save an e-mail address in Contacts, see  
Save details p. 47.  
Your device supports the sending of text messages beyond the character limit for  
a single message. Longer messages will be sent as a series of two or more  
messages. Your service provider may charge accordingly. Characters that use  
accents or other marks, and characters from some language options like Chinese,  
take up more space limiting the number of characters that can be sent in a single  
message.  
The message length indicator at the top of the display shows the total  
number of characters left and the number of messages needed for  
sending. For example, 673/2 means that there are 673 characters left  
and that the message will be sent as a series of two messages.  
Write and send a SMS message  
1. Select Menu > Messaging > Create message > Text message.  
2. Enter the recipient’s phone number or e-mail address in the To: field.  
To retrieve a phone number or e-mail address from Contacts, select  
Add > Contact. To send the message to multiple recipients, add the  
desired contacts one by one. To send the message to persons in a  
group, select Contact group and the desired group. To retrieve the  
contacts to which you recently sent messages, select Add > Recently  
28  
         
M e s s a g i n g  
used. To retrieve contacts from previously incoming calls, select  
Add > Open Log.  
3. For a SMS e-mail, enter a subject in the Subject: field.  
4. Write your message in the Message: field. See Write text p. 26. To  
insert a template into the message, select Options > Use template.  
To see how the message will look to the recipient, select Options >  
Preview.  
5. To send the message, select Send. See Message sending p. 31.  
Read and reply to an SMS message  
When you have received a message, 1 message received or the number  
of new messages with messages received are shown.  
1. To view a new message, select Show. To view it later, select Exit.  
To read the message later, select Menu > Messaging > Inbox. If more  
than one message is received, select the message you want to read.  
is shown if you have unread messages in Inbox.  
2. To view the list of available options while reading a message, select  
Options.  
3. To reply to a message, select Reply > Text message, Multimedia,  
Flash message, or Audio message.  
To send a text message to an e-mail address, enter the e-mail  
address in the To: field.  
Scroll down, and write your message in the Message: field. See Write  
text p. 26.  
If you want to change the message type for your reply message,  
select Options > Change message type.  
4. To send the message, select Send. See Message sending p. 31.  
SIM messages  
SIM messages are text messages that are saved to your SIM card. You  
can copy or move those messages to the phone memory, but not vice  
versa. Received messages are saved to the phone memory.  
29  
 
M e s s a g i n g  
To read SIM messages, select Menu > Messaging > Options > SIM  
messages.  
Multimedia messages  
Note: Only devices that have compatible features can receive and  
display multimedia messages. The appearance of a message may vary  
depending on the receiving device.  
To check availability and to subscribe to the multimedia messaging  
service (MMS), contact your service provider. See Multimedia messages  
p. 44.  
A multimedia message can contain text, sound, pictures, video clips, a  
business card, and a calendar note. If the message is too large, the  
phone may not be able to receive it. Some networks allow text messages  
that include an internet address where you can view the multimedia  
message.  
You cannot receive multimedia messages during a call or an active  
browsing session over GSM data. Because delivery of multimedia  
messages can fail for various reasons, do not rely solely upon them for  
essential communications.  
Write and send a MMS message  
The wireless network may limit the size of MMS messages. If the inserted picture  
exceeds this limit, the device may make it smaller so that it can be sent by MMS.  
1. Select Menu > Messaging > Create message > Multimedia.  
2. Enter your message.  
Your phone supports multimedia messages that contain several  
pages (slides). A message can contain a calendar note and a business  
card as attachments. A slide can contain text, one image, and one  
sound clip; or text and a video clip. To insert a slide in the message,  
select New; or select Options > Insert > Slide.  
To insert a file in the message, select Insert; or select Options >  
Insert.  
3. To view the message before sending it, select Options > Preview.  
30  
   
M e s s a g i n g  
4. To send the message, select Send. See Message sending p. 31.  
5. Enter the recipient’s phone number in the To: field. To retrieve a  
phone number from Contacts, select Add > Contact. To send the  
message to multiple recipients, add the desired contacts one by one.  
To send the message to persons in a group, select Contact group and  
the desired group. To retrieve the contacts to which you recently sent  
messages, select Add > Recently used.  
Message sending  
Copyright protections may prevent some images, music (including ringing tones),  
and other content from being copied, modified, transferred or forwarded.  
When you finish writing your message, to send the message, select  
Send. The phone saves the message in the Outbox folder, and the  
sending starts. If you select Save sent messages > Yes, the sent message  
is saved in the Sent items folder. See General settings p. 43.  
Note: When the phone sends the message, the animated  
is shown.  
This is an indication that the message has been sent by your device to  
the message centre number programmed into your device. This is not  
an indication that the message has been received at the intended  
destination. For more details about messaging services, check with your  
service provider.  
It takes more time to send a multimedia message than to send a text  
message. While the message is being sent, you can use other functions  
on the phone. If an interruption occurs while the message is being sent,  
the phone tries to resend the message a few times. If these attempts fail,  
the message remains in the Outbox folder. You can try to resend it later.  
Cancel message sending  
To cancel the sending of the messages in the Outbox folder, scroll to the  
desired message, and select Options > Cancel sending.  
Read and reply to a MMS message  
Important: Exercise caution when opening messages. Multimedia  
message objects may contain malicious software or otherwise be  
harmful to your device or PC.  
31  
     
M e s s a g i n g  
When you receive a new multimedia message, Multimedia message  
received or the number of new messages with messages received is  
shown.  
1. To read the message, select Show. To view it later, select Exit.  
To read the message later, select Menu > Messaging > Inbox. Scroll  
to the message that you want to view, and select it.  
is shown if  
you have unread messages in Inbox.  
2. To view the whole message if the received message contains a  
presentation, select Play.  
To view the files in the presentation or the attachments, select  
Options > Objects or Attachments.  
3. To reply to the message, select Options > Reply > Text message,  
Multimedia, Postcard, Flash message, or Audio message. Write the  
reply message.  
If you want to change the message type for your reply message,  
select Options > Change message type. The new message type may  
not support all the content that you have added.  
4. To send the message, select Send. See Message sending p. 31.  
Memory full  
When you receive a message, and the memory for the messages is full,  
Memory full. Unable to receive messages. is shown. To first delete old  
messages, select OK > Yes and the folder. Scroll to the desired message,  
and select Delete. If more messages are to be deleted, select Mark. Mark  
all the messages you want to delete, and select Options > Delete  
marked.  
Folders  
The phone saves received messages in the Inbox folder.  
Messages that have not yet been sent are saved in the Outbox folder.  
To set the phone to save the sent messages in the Sent items folder, see  
Save sent messages in General settings p. 43.  
32  
   
M e s s a g i n g  
To save the message that you write and want to send later in the Drafts  
folder, select Options > Save message > Drafts.  
You can move your messages to the Saved items folder. To organise your  
Saved items sub folders, select Menu > Messaging > Saved items. To  
add a folder, select Options > Add folder. To delete or rename a folder,  
scroll to the desired folder, and select Options > Delete folder or  
Rename folder.  
Your phone has templates. To create a new template, save a message as  
a template. To access the template list, select Menu > Messaging >  
Saved items > Templates.  
Flash messages  
Flash messages are text messages that are instantly displayed upon  
reception. Flash messages are not automatically saved.  
Write a flash message  
Select Menu > Messaging > Create message > Flash message. Enter the  
recipient’s phone number in the To: field. Scroll down, and write your  
message in the Message: field. The maximum length of a flash message  
is 70 characters. To insert a blinking text into the message, select  
Options > Insert blink character to set a marker. The text behind the  
marker blinks until a second marker is inserted.  
Receive a flash message  
A received flash message is indicated with Message: and a few words  
from the beginning of the message. To read the message, select Show.  
To extract phone numbers, e-mail addresses, and website addresses  
from the current message, select Options > Use detail. To save the  
message, select Save and the folder in which you want to save it.  
Nokia Xpress audio messaging  
You can use MMS to create and send a audio message in a convenient  
way. MMS must be activated before you can use audio messages.  
33  
   
M e s s a g i n g  
Create an audio message  
1. Select Menu > Messaging > Create message > Audio message. The  
recorder opens. To use the recorder, see Voice recorder p. 73.  
2. Speak your message.  
3. Enter the recipient’s phone number in the To: field. To retrieve a  
phone number from Contacts, select Add > Contact. To send the  
message to multiple recipients, add the desired contacts one by one.  
To send the message to persons in a group, select Contact group and  
the desired group. To retrieve the contacts to which you recently sent  
messages, select Add > Recently used.  
4. To send the message, select Send.  
Receive an audio message  
When your phone receives an audio message, 1 audio message received  
is displayed. To open the message, select Play; or if more than one  
message is received, select Show > Play. To listen to the message later,  
select Exit. To see the available options, select Options.  
E-mail application  
The e-mail application uses a packet data connection (network service)  
to allow you to access your e-mail account from your phone when you  
are not in the office or at home. This e-mail application is different from  
the SMS e-mail function. To use the e-mail function on your phone, you  
need a compatible e-mail system.  
You can write, send, and read e-mail with your phone. You can also save  
and delete the e-mail on a compatible PC. Your phone supports POP3  
and IMAP4 e-mail servers.  
Before you can send and retrieve any e-mail messages, you must do the  
following:  
• Obtain a new e-mail account or use your current account. To check  
the availability of your e-mail account, contact your e-mail service  
provider.  
34  
   
M e s s a g i n g  
• Check your e-mail settings with your network operator or e-mail  
service provider. You may receive the e-mail configuration settings  
as a configuration message. See Configuration settings service, 9.  
You can also enter the settings manually. See Configuration, 65.  
To activate the e-mail settings, select Menu > Messaging > Message  
settings > E-mail messages. See E-mail messages, 45.  
This application does not support keypad tones.  
Setting wizard  
The setting wizard will start automatically if no e-mail settings are  
defined in the phone. To enter the settings manually, select Menu >  
Messaging > E-mail > Options > Manage accounts > Options > New.  
The Manage accounts options allow you to add, delete, and change the  
e-mail settings after they are defined. Make sure that you have defined  
the correct preferred access point for your operator. See Configuration  
p. 65.  
The e-mail application requires an internet access point without a  
proxy. WAP access points normally include a proxy and do not work with  
the e-mail application.  
Write and send an e-mail  
You can write your e-mail message before connecting to the e-mail  
service; or connect to the service first, then write and send your e-mail.  
1. Select Menu > Messaging > E-mail > Write new e-mail.  
2. If more than one e-mail account is defined, select the account from  
which you want to send the e-mail.  
3. Enter the recipient’s e-mail address.  
4. Write a subject for the e-mail.  
5. Write the e-mail message. See Write text p. 26.  
To attach a file to the e-mail, select Options > Attach file and a file  
from Gallery.  
6. To send the e-mail message immediately, select Send > Send now.  
35  
M e s s a g i n g  
To save the e-mail in the Outbox folder to be sent later, select  
Send > Send later.  
To edit or continue writing your e-mail later, select Options > Save  
as draft. The e-mail is saved in Outboxes > Drafts.  
To send an e-mail after saving a draft in the outbox, select Menu >  
Messaging > E-mail > Options > Send now or Send and check for  
e-mail.  
Download e-mail  
1. To download e-mail messages that have been sent to your e-mail  
account, select Menu > Messaging > E-mail > Check new e-mail.  
If more than one e-mail account is defined, select the account from  
which you want to download the e-mail.  
The e-mail application only downloads e-mail headers at first.  
2. Select Back.  
3. Select Inboxes, the account name, and the new message, and select  
Retrieve to download the complete e-mail message.  
To download new e-mail messages and to send e-mail that has been  
saved in the Outbox folder, select Options > Send and check for e-mail.  
Read and reply to e-mail  
Important: Exercise caution when opening messages. E-mail messages  
may contain malicious software or otherwise be harmful to your device  
or PC.  
Select Menu > Messaging > E-mail > Inboxes, the account name, and the  
desired message. While reading the message, select Options to view the available  
options. To reply to an e-mail, select Reply > Original text or Empty message. To  
reply to many, select Options > Reply to all. Confirm or edit the e-mail address  
and subject, then write your reply. To send the message, select Send > Send now.  
E-mail folders  
Your phone saves e-mail that you have downloaded from your e-mail  
account in the Inboxes folder. The Inboxes folder contains the following  
folders: “Account name” for incoming e-mail, Archive for archiving  
36  
M e s s a g i n g  
e-mail, Custom 1 Custom 3 for sorting e-mail, Junk where all spam  
e-mail is stored, Drafts for saving unfinished e-mail, Outbox for saving  
e-mail that has not been sent, and Sent items for saving e-mail that has  
been sent.  
To manage the folders and their e-mail content, select Options to view  
the available options of each folder.  
Spam filter  
The e-mail application allows you to activate a built-in spam filter. To  
activate and define this filter, select Options > Spam filter > Settings in  
the main e-mail idle screen. The spam filter allows the user to put  
specific senders on a black or white list. Black list sender messages are  
filtered to the Junk folder. Unknown and White list sender messages are  
downloaded into the account inbox. To blacklist a sender, select the  
e-mail message in the Inboxes folder and Options > Blacklist sender.  
Instant messaging  
You can take text messaging to the next level by experiencing instant  
messaging (IM) (network service) in a wireless environment. You can  
engage in IM with friends and family, regardless of the mobile system or  
platform (like the internet) they are using, as long as you all use the  
same IM service.  
Before you can start using IM, you must first subscribe to your wireless  
service provider’s text messaging service and register with the IM service  
you want to use. You must also obtain a user name and password before  
youcanuseIM. SeeRegister with an IM service p. 38 formoreinformation.  
Note: Depending on both your IM service provider and your  
wireless service provider, you may not have access to all of the  
features described in this guide.  
To set the required settings for the IM service, see Connection settings in  
Access p. 38. The icons and texts on the display may vary, depending on  
the IM service.  
While you are connected to the IM service, you can use the other  
functions of the phone, and the IM conversation remains active in the  
37  
   
M e s s a g i n g  
background. Depending on the network, the active IM conversation may  
consume the phone battery faster, and you may need to connect the  
phone to a charger.  
Register with an IM service  
You can do this by registering over the internet with the IM service  
provider you have selected to use. During the registration process, you  
will have the opportunity to create the user name and password of your  
choice. For more information about signing up for IM services, contact  
your wireless service provider.  
Access  
To access the Instant messages menu while still offline, select Menu >  
Messaging > Instant messages (Instant messages may be replaced by  
another term depending on the service provider). If more than one set of  
connection settings for IM service is available, select the one you want.  
If there is only one set defined, it is selected automatically.  
The following options are shown:  
Login — to connect to the IM service. To set the phone to automatically  
connect to the IM service when you switch on the phone; in the login  
session, scroll to Automatic login: and select Change >On, or select  
Menu > Messaging > Instant messages, connect to the IM service, and  
select Options > Settings > Automatic login > On.  
Saved conversations — to view, erase, or rename the conversations that  
you saved during an IM session  
Connection settings — to edit the settings needed for messaging and  
presence connection  
Connect  
To connect to the IM service, access the Instant messages menu, select  
the IM service, if needed, and select Login. When the phone has  
successfully connected, Logged in is displayed.  
To disconnect from the IM service, select Options > Logout.  
38  
   
M e s s a g i n g  
Sessions  
When connected to the IM service your status as seen by others is  
shown in a status line: My status: Online, My status: Busy or Status:  
Appear offline — to change own status, select Change.  
Below the status line there are three folders containing your contacts  
and showing their status: Conversations (), Online () and Offline (). To  
expand the folder highlight it and select Expand (or press scroll right), to  
collapse the folder select Collapse (or press scroll left).  
Conversations — shows the list of new and read instant messages or  
invitations to IM during the active IM session.  
indicates a new group message.  
indicates a read group message.  
indicates a new instant message.  
indicates a read instant message.  
indicates an invitation.  
The icons and texts on the display may vary, depending on the IM service  
you have selected.  
Online () — shows the number of contacts that are online  
Offline () — shows the number of contacts that are offline  
To start a conversation, expand the Online () or the Offline () folder,  
scroll to the contact with whom you would like to chat, and select Chat.  
To answer an invitation or to reply to a message, expand the  
Conversations folder, scroll to the contact to whom you would like to  
chat, and select Open. To add contacts, see Add IM contacts p. 41.  
Groups > Public groups — the list of bookmarks to public groups  
provided by the service provider is displayed, but not visible if groups are  
not supported by the network. To start an IM session with a group, scroll  
to a group, and select Join. Enter the screen name that you want to use  
as your nickname in the conversation. When you have successfully  
joined the group conversation, you can start a group conversation. You  
can create a private group. See Groups p. 41.  
39  
M e s s a g i n g  
Search > Users or Groups — to search for other IM users or public groups  
on the network by phone number, screen name, e-mail address, or name.  
If you select Groups, you can search for a group by a member in the  
group, or by group name, topic, or ID.  
Options > Chat or Join group — to start the conversation when you have  
found the user or the group that you want.  
Accept or reject an invitation  
In the standby mode, when you are connected to the IM service and you  
receive a new invitation, New invitation received is displayed. To read it,  
select Read. If more than one invitation is received, scroll to the  
invitation you want, and select Open. To join the private group  
conversation, select Accept, and enter the screen name you want to use  
as your nickname. To reject or delete the invitation, select Options >  
Reject or Delete.  
Read an instant message  
In the standby mode, when you are connected to the IM service, and you  
receive a new message that is not a message associated with an active  
conversation, New instant message is displayed.To read it, select Read.  
If you receive more than one message, N new instant messages appears  
in the display, where N is the number of new messages. Select Read,  
scroll to a message, and select Open.  
New messages received during an active conversation are held in  
Instant messages > Conversations. If you receive a message from  
someone who is not in IM contacts, the sender ID is displayed. To save a  
new contact that is not in the phone memory, select Options > Save  
contact.  
Participate in a conversation  
To join or start an IM session, write your message; and select Send, or  
press the call key. Select Options to view the available options.  
If you receive a new message during a conversation from a person who  
is not taking part in the current conversation,  
phone sounds an alert tone.  
is displayed, and the  
40  
M e s s a g i n g  
Write your message; select Send, or press the call key. Your message is  
displayed, and the reply message is displayed below your message.  
Add IM contacts  
When connected to the IM service, in the IM main menu select  
Options > Add contact.  
Select By mobile number, Enter ID manually, Search from server, or Copy  
from server (depending on service provider). When the contact is  
successfully added, the phone confirms it.  
Scroll to a contact. To start a conversation, select Chat.  
Block or unblock messages  
When you are in a conversation and want to block messages, select  
Options > Block contact. A confirmation query is shown, select OK to  
block messages from this contact.  
To block messages from a specific contact in your contacts list, scroll to  
the contact in Conversations, Online () or Offline () and select Options >  
Block contact > OK.  
To unblock a contact, in the IM main menu select Options > Blocked list.  
Scroll to the contact you want to unblock and select Unblock > OK.  
Groups  
You can create your own private groups for an IM conversation, or use  
the public groups provided by the service provider. The private groups  
exist only during an IM conversation, and the groups are saved on the  
server of the service provider. If the server you are logged into does not  
support group services, all group-related menus are dimmed.  
Public  
You can bookmark public groups that your service provider may  
maintain. Connect to the IM service, and select Groups > Public groups.  
Scroll to a group with which you want to chat, and select Join. If you are  
not in the group, enter your screen name as your nickname for the  
41  
   
M e s s a g i n g  
group. To delete a group from your group list, select Options > Delete  
group.  
To search for a group, select Groups > Public groups > Search groups.  
You can search for a group by a member in the group, by group name,  
topic, or ID.  
Private  
Connect to the IM service, and from the main menu select Options >  
Create group. Enter the name for the group and the screen name that  
you want to use as your nickname. Mark the private group members in  
the contacts list, and write an invitation.  
Voice messages  
The voice mailbox is a network service and you may need to subscribe to  
it. For more information and for your voice mailbox number, contact  
your service provider.  
To call your voice mailbox, select Menu > Messaging > Voice  
messages > Listen to voice messages. To enter, search for, or edit your  
voice mailbox number, select Voice mailbox number.  
If supported by the network,  
indicates new voice messages. To call  
your voice mailbox number, select Listen.  
Info messages  
With Info messages (network service), you can receive messages on  
various topics from your service provider. To check availability, topics,  
and the relevant topic numbers, contact your service provider.  
Service commands  
Select Menu > Messaging > Service commands. Write and send service  
requests (also known as USSD commands), such as activation  
commands for network services, to your service provider.  
42  
     
M e s s a g i n g  
Delete messages  
To delete messages, select Menu > Messaging > Delete messages > By  
message to delete single messages, By folder to delete all messages from  
a folder, or All messages. If a folder contains unread messages, the  
phone asks whether you want to delete them also.  
Message settings  
General settings  
General settings are common for text and multimedia messages.  
Select Menu > Messaging > Message settings > General settings and  
from the following options:  
Save sent messages > Yes — to set the phone to save the sent messages  
in the Sent items folder  
Overwriting in Sent items > Allowed — to set the phone to overwrite the  
old sent messages with the new ones when the message memory is full.  
This setting is shown only if you set Save sent messages > Yes.  
Font size — to select the font size used in messages  
Graphical smileys > Yes — to set the phone to replace character-based  
smileys with graphical ones  
Text messages  
The text message settings affect the sending, receiving, and viewing of  
text and SMS e-mail messages.  
Select Menu > Messaging > Message settings > Text messages and  
from the following options:  
Delivery reports > Yes — to ask the network to send delivery reports  
about your messages (network service)  
Message centres > Add centre — to set the phone number and name of  
the message centre that is required for sending text messages. You  
receive this number from your service provider.  
Message centre in use — to select the message centre in use  
43  
       
M e s s a g i n g  
E-mail message centres > Add centre — to set the phone numbers and  
name of the e-mail centre for sending SMS e-mails  
E-mail centre in use — to select the SMS e-mail message centre in use  
Message validity — to select the length of time for which the network  
attempts to deliver your message  
Messages sent via — to select the format of the messages to be sent:  
Text, Paging, or Fax (network service)  
Use packet data > Yes — to set GPRS as the preferred SMS bearer  
Character support > Full — to select all characters in the messages to be  
sent as viewed. If you select Reduced, characters with accents and other  
marks may be converted to other characters. When writing a message,  
you can preview it to see how the message will look to the recipient. See  
Write and send a SMS message p. 28.  
Reply via same centre > Yes — to allow the recipient of your message to  
send you a reply using your message centre (network service)  
Multimedia messages  
The message settings affect the sending, receiving, and viewing of  
multimedia messages.  
You may receive the configuration settings for multimedia messaging as  
a configuration message. See Configuration settings service p. 9. You  
can also enter the settings manually. See Configuration p. 65.  
Select Menu > Messaging > Message settings > Multimedia messages  
and from the following options:  
Delivery reports > Yes — to ask the network to send delivery reports  
about your messages (network service)  
Image size (multimedia) — to set the image size in multimedia messages.  
Before sending, images will be reduced to the selected size.  
Default slide timing — to define the default time between slides in  
multimedia messages  
Allow multimedia recept. — to receive or block the multimedia message,  
select Yes or No. If you select In home network, you cannot receive  
multimedia messages when outside your home network. The default  
44  
 
M e s s a g i n g  
setting of the multimedia message service is generally In home network.  
The availability of this menu depends on your phone.  
Incoming multim. msgs. — to allow the reception of multimedia  
messages automatically, manually after being prompted, or to reject the  
reception. This setting is not shown if Allow multimedia recept. is set to  
No.  
Allow adverts — to receive or reject advertisements. This setting is not  
shown if Allow multimedia recept. is set to No or Incoming multim.  
msgs. is set to Reject.  
Configuration settings > Configuration — only the configurations that  
support multimedia messaging are shown. Select a service provider,  
Default, or Personal configuration for multimedia messaging. Select  
Account and an MMS service account contained in the active  
configuration settings.  
E-mail messages  
The settings affect the sending, receiving, and viewing of e-mail.  
You may receive the configuration settings for the e-mail application as  
a configuration message. See Configuration settings service p. 9. You  
can also enter the settings manually. See Configuration p. 65.  
To activate the settings for the e-mail application, select Menu >  
Messaging > Message settings > E-mail messages and from the  
following options:  
Configuration — to select the set that you want to activate  
Account — to select an account provided by the service provider  
My name — to enter your name or nickname  
E-mail address — to enter your e-mail address  
Include signature — to define a signature that is automatically added to  
the end of your e-mail when you write your message  
Reply-to address — to enter the e-mail address to which you want the  
replies to be sent  
SMTP user name — to enter the name that you want to use for outgoing  
mail  
45  
 
C o n t a c t s  
SMTP password — to enter the password that you want to use for  
outgoing mail  
Display terminal window > Yes — to perform manual user  
authentication for intranet connections  
Incoming server type > POP3 or IMAP4 — to select the type of e-mail  
system that you are using. If both types are supported, select IMAP4  
Incoming mail settings — to select available options for POP3 or IMAP4  
7. Contacts  
You can save names and phone numbers (contacts) in the  
phone memory and in the SIM card memory.  
The phone memory may save contacts with additional details, such as  
various phone numbers and text items. You can also save an image for a  
limited number of contacts.  
The SIM card memory can save names with one phone number attached  
to them. The contacts saved in the SIM card memory are indicated  
by  
.
Search for a contact  
Select Menu > Contacts > Names. Scroll through the list of contacts, or  
enter the first characters of the name you are searching for.  
Save names and phone numbers  
Names and numbers are saved in the used memory. To save a name and  
phone number, select Menu > Contacts > Names > Options > Add new  
contact. Enter the last name, first name, the phone number; and select  
Save.  
46  
   
C o n t a c t s  
Save details  
In the phone memory for contacts you can save different types of phone  
numbers, and short text items per name. You can also select a tone or a  
video clip for a contact.  
The first number you save is automatically set as the default number,  
and it is indicated with a frame around the number type indicator (for  
example,  
). When you select a name from contacts (for example, to  
make a call), the default number is used unless you select another  
number.  
1. Make sure that the memory in use is Phone or Phone and SIM. See  
Settings p. 51.  
2. Search for the contact to which you want to add a detail, and select  
Details > Options > Add detail. Select from the options available.  
To search for an ID from the server of your service provider if you  
have connected to the presence service, select User ID > Search. See  
My presence p. 48. If only one ID is found, it is automatically saved.  
Otherwise, to save the ID, select Options > Save. To enter the ID,  
select Enter ID manually. Enter the ID, and select OK to save it.  
Copy contacts  
To copy a name and phone number from the phone contact memory to  
the SIM card memory, or vice versa, select Menu > Contacts > Names >  
Options > Copy contact. To move all contacts from the SIM card to  
phone memory, or vice versa, select Menu > Contacts > Move contacts  
or Copy contacts > From phone to SIM card or From SIM card to phone.  
To copy more than one contact, but not all contacts, select Menu >  
Contacts > Names > Options > Mark. Scroll and mark the contacts you  
want to move and select Move marked or Copy marked.  
Edit contact details  
Search for the contact you want to edit, and select Details. To edit a  
name, number, text item, or to change the image, select Options > Edit.  
To change the number type, scroll to the desired number, and select  
Options > Change type. To set the selected number as the default  
47  
 
C o n t a c t s  
number, select Set as default. You cannot edit an ID when it is on the IM  
contacts or Subscribed names list.  
Delete contacts  
To delete all the contacts and the details attached to them from the  
phone or SIM card memory, select Menu > Contacts > Delete all  
contacts > From phone memory or From SIM card. Confirm with the  
security code.  
To delete a contact, search for the desired contact, and select Options >  
Delete contact.  
To delete a number, text item, or an image attached to the contact,  
search for the contact, and select Details. Scroll to the desired detail,  
and select Options > Delete and from the options available. Deleting an  
image or video clip from contacts does not delete it from Gallery.  
My presence  
With the presence service (network service), you can share your presence  
statuswithotheruserswithcompatibledevicesandaccesstotheservice,  
such as your family, friends, and colleagues. Presence status includes  
your availability, status message, and personal logo. Other users who  
have access to the service and who request your information are able to  
see your status. The requested information is shown in Subscribed names  
in the viewers’ Contacts menu. You can personalise the information that  
you want to share with others and control who can see your status.  
Before you can use presence, you must subscribe to the service. To check  
the availability and costs, and to subscribe to the service, contact your  
network operator or service provider, from whom you also receive your  
unique ID, password, and the settings for the service. See Configuration  
p. 65.  
While you are connected to the presence service, you can use the other  
functions of the phone, and the presence service is active in the  
background. If you disconnect from the service, your presence status is  
shown for a certain amount of time to viewers, depending on the service  
provider.  
48  
 
C o n t a c t s  
Select Menu > Contacts > My presence and from the following options:  
Connect to 'My presence' or Disconnect from service — to connect to or  
disconnect from the service  
View my presence > Private presence or Public presence — to view your  
presence status  
Edit my presence > My availability, My presence message, My presence  
logo, or Show to — to change your presence status  
My viewers > Current viewers, Private list, or Blocked list — to view the  
persons who are subscribed to or blocked from your presence  
information  
Settings > Show pres. in standby, Connection type, or Presence settings.  
Subscribed names  
You can create a list of contacts whose presence status information you  
want to be aware of. You can view the information if it is allowed by the  
contacts and the network. To view these subscribed names, scroll  
through the contacts, or use the Subscribed names menu.  
Ensure that the memory in use is Phone or Phone and SIM. See Settings  
page 51.  
To connect to the presence service, select Menu > Contacts > My  
presence > Connect to 'My presence'.  
Add contacts to the subscribed names  
1. Select Menu > Contacts > Subscribed names. If you have not  
connected to the presence service, the phone asks if you want to  
connect now.  
2. If you have no contacts on your list, select Add. Otherwise, select  
Options > Subscribe new. Your list of contacts is shown.  
3. Select a contact from the list. If the contact has a saved ID, the  
contact is added to the subscribed names list. If there is more than  
one ID, select one of them. After subscription to the contact,  
Subscription activated is shown.  
49  
 
C o n t a c t s  
Tip: To subscribe to a contact from the Contacts list, search for  
the contact you want, and select Details > Options > Request  
presence > As subscription.  
If you only want to view the presence information but not to subscribe  
to a contact, select Request presence > One time only.  
View the subscribed names  
To view the presence information, see also Search for a contact p. 46.  
1. Select Menu > Contacts > Subscribed names.  
The status information of the first contact on the subscribed names  
list is displayed. The information that the person wants to make  
available to others may include text and an icon.  
,
, or indicates that the person is available, not visible to  
others, or not available.  
indicates that the person’s presence information is not available.  
2. Select Options > View details to view the details of the selected  
contact or Options > Subscribe new, Send message, Send business  
card, or Unsubscribe.  
Unsubscribe a contact  
To unsubscribe a contact from the Contacts list, select the contact and  
Options > Unsubscribe > OK.  
To unsubscribe from the Subscribed names menu, see View the  
subscribed names p. 50.  
Business cards  
You can send and receive a person’s contact information from a  
compatible device that supports the vCard standard as a business card.  
To send a business card, search for the contact whose information you  
want to send, and select Details > Options > Send business card > Via  
multimedia, Via text message, or Via Bluetooth.  
50  
   
C o n t a c t s  
When you have received a business card, select Show > Save to save the  
business card in the phone memory. To discard the business card, select  
Exit > Yes.  
Settings  
Select Menu > Contacts > Settings and from the following options:  
Memory in use — to select the SIM card or phone memory for your  
contacts. Select Phone and SIM to recall names and number from both  
memories. In that case, when you save names and numbers, they are  
saved in the phone memory.  
Contacts view — to select how the names and numbers in Contacts are  
displayed  
Name display — to select whether the contact’s first or last name is  
displayed first  
Font size — to set the font size for the list of contacts  
Memory status — to view the free and used memory capacity  
Groups  
Select Menu > Contacts > Groups to arrange the names and phone  
numbers saved in the memory into caller groups with different ringing  
tones and group images.  
Speed dials  
To assign a number to a speed-dialling key, select Menu > Contacts >  
Speed dials, and scroll to the speed-dialling number that you want.  
Select Assign, or if a number has already been assigned to the key,  
select Options > Change. Select Search and the contact you want to  
assign. If the Speed dialling function is off, the phone asks whether you  
want to activate it. See also Speed dialling in Call p. 62.  
To make a call using the speed-dialling keys, see Speed dialling p. 23.  
51  
   
C a l l l o g  
8. Call log  
The phone registers your missed, received, and dialed calls  
if the network supports it and the phone is switched on and within the  
network service area.  
To view the information on your calls, select Menu > Log > Missed calls,  
Received calls, or Dialled numbers. To view your recent missed and  
received calls and the dialed numbers chronologically, select Call log. To  
view the contacts to whom you most recently sent messages, select  
Message recipients.  
To view the approximate information on your recent communications,  
select Menu > Log > Call duration, Packet data counter, or Packet data  
timer.  
To view how many text and multimedia messages you have sent and  
received, select Menu > Log > Message log.  
Note: The actual invoice for calls and services from your service  
provider may vary, depending on network features, rounding off for  
billing, taxes, and so forth.  
Some timers may be reset during service or software upgrades.  
Positioning information  
The network may send you a location request. You can ensure that the  
network will deliver location information of your phone only if you  
approve it (network service). Contact your service provider to subscribe  
and to agree upon the delivery of location information.  
To accept or reject the location request, select Accept or Reject. If you  
miss the request, the phone automatically accepts or rejects it  
according to what you have agreed with your network operator or  
service provider. The phone displays 1 missed position request. To view  
the missed location request, select Show.  
To view or delete the information on the 10 most recent privacy  
notifications and requests, select Menu > Log > Positioning > Position  
log > Open folder or Delete all.  
52  
   
S e t t i n g s  
9. Settings  
Profiles  
Your phone has various setting groups called profiles, for which you can  
customise the phone tones for different events and environments.  
Select Menu > Settings > Profiles, the desired profile, and from the  
following options:  
Activate — to activate the selected profile  
Personalise — to personalise the profile. Select the setting you want to  
change, and make the changes.  
Timed — to set the profile to be active until a certain time up to  
24 hours, and set the end time. When the time set for the profile expires,  
the previous profile that was not timed becomes active.  
Themes  
A theme contains many elements for personalizing your phone, such as  
wallpaper, screen saver, colour scheme, and a ringing tone.  
Select Menu > Settings > Themes and from the following options:  
Select theme — to set a theme in your phone. A list of folders in Gallery  
opens. Open the Themes folder, and select a theme.  
Theme downloads — to open a list of links to download more themes  
Tones  
You can change the tone settings of the selected active profile.  
Select Menu > Settings > Tones. You can find the same settings in the  
Profiles menu. See Personalise in Profiles p. 53.  
To set the phone to ring only for calls from phone numbers that belong  
to a selected caller group, select Alert for. Scroll to the caller group you  
want or All calls, and select Mark.  
Select Options > Save to save the settings or Cancel to leave the  
settings unchanged.  
53  
       
S e t t i n g s  
If you select the highest ringing tone level, the ringing tone reaches its highest  
level after a few seconds.  
A theme may contain a tone that sounds when you open and close the  
phone. To switch off the tone, change the setting in Other tones:. Please  
note that this setting also switches off the warning tones.  
Display  
Select Menu > Settings > Display and from the available options.  
Standby mode settings  
Select Standby mode settings and from the following options:  
Active standby — to switch the active standby mode on or off and to  
organise and personalise the active standby mode. See Active standby  
p. 20.  
Wallpaper — to add the background image to the display in the standby  
mode  
Slide animation — to set your phone to display an animation when you  
open and close the phone  
Standby font colour — to select the colour for the texts on the display in  
the standby mode  
Navigation key icons — to display the icons of the current navigation key  
shortcuts in the standby mode when active standby is off  
Operator logo — to set your phone to display or hide the operator logo.  
The menu is dimmed, if you have not saved the operator logo. For more  
information on availability of an operator logo, contact your network  
operator.  
Cell info display > On — to display the cell identity, if available from the  
network  
Screensaver  
Select Screen saver and from the following options:  
On — to activate the screen saver for the display  
54  
           
S e t t i n g s  
Screen savers > Image — to choose an image or a graphic from the  
Gallery  
Screen savers > Slide set and a folder in the Gallery — to use the images  
in the folder as a slide set  
Screen savers > Video clip and a video clip from the Gallery — to run a  
video clip as screensaver  
Screen savers > Open camera — to take a new photo as screensaver  
Screen savers > Analogue clock or Digital clock — to use a clock as  
screensaver  
Graphic downloads — to download more images for the screen saver  
Time-out — to set the time after which the screen saver is activated  
Powersaver  
To automatically activate the screen saver time-out to optimise battery  
life, select Menu > Settings > Display > Power saver.  
Sleep mode  
To turn the phone display off during inactivity, select Menu > Settings >  
Display > Sleep mode.  
Light indicator  
To set the LED lights on the display when the phone is in the standby  
mode, select Menu > Settings > Display > Light indicator and the  
duration of time. When Sleep mode is activated, the keymat lights are  
activated after the screensaver time-out.  
Your device must have an activated SIM card installed for the Light  
indicator to operate.  
Note: Turning on the Light indicator consumes battery power  
and reduces the overall battery life of your device.  
55  
     
S e t t i n g s  
Font size  
To set the font size for reading and writing messages, and viewing  
contacts and web pages, select Menu > Settings > Display > Font size.  
Time and date  
To change the time, time zone, and date settings, select Menu >  
Settings > Time and date > Clock, Date, or Auto-update of date/time  
(network service).  
When traveling to a different time zone, select Menu > Settings > Time  
and date > Clock > Time zone and the time zone of your location in  
terms of the time difference with respect to Greenwich Mean Time  
(GMT) or Universal Time Coordinated (UTC). The time and date are set  
according to the time zone and enable your phone to display the correct  
sending time of received text or multimedia messages. For example,  
GMT -5 denotes the time zone for New York (USA), 5 hours west of  
Greenwich/London (UK).  
My shortcuts  
With personal shortcuts you get quick access to often used functions of  
the phone.  
Left selection key  
To select a function from the list for the left selection key, select  
Menu > Settings > My shortcuts > Left selection key. See also Standby  
mode p. 19.  
If the left selection key is Go to to activate a function, in the standby  
mode, select Go to > Options and from the following options:  
Select options — to add a function to the shortcut list or to remove one.  
Scroll to the function, and select Mark or Unmark.  
Organise — to rearrange the functions on your personal shortcut list.  
Scroll to the function you want to move, and select Move. Scroll to  
where you want to move the function, and select OK.  
56  
     
S e t t i n g s  
Right selection key  
To select a function from the list for the right selection key, select  
Menu > Settings > My shortcuts > Right selection key. See also Standby  
mode p. 19.  
Shortcut bar  
Tochooseandreorderapplicationsshownbytheshortcutbarintheactive  
standby mode, select Menu > Settings > My shortcuts > Shortcut bar.  
Select Select links, and mark the desired application in the list or in a  
folder. Select Done > Yes to confirm the selection.  
Select Organise links to reorder the applications in the shortcut bar.  
Select an application, Move, and move it to an other position. Select OK  
to confirm. Select Done > Yes to save the shortcut sequence.  
Navigation key  
To select shortcut functions for the scroll keys, select Menu >  
Settings > My shortcuts > Navigation key. Scroll to the desired key, and  
select Change and a function from the list. To remove a shortcut  
function from the key, select (empty). To reassign a function for the key,  
select Assign. See Shortcuts in the standby mode p. 20.  
Voice commands  
To call contacts and carry out phone functions, say the voice commands.  
Voice commands are language-dependent. To set the language, see  
Voice playback language in Phone p. 63.  
To select the phone functions to activate with a voice commands, select  
Menu > Settings > My shortcuts > Voice commands and a folder. Scroll  
to a function.  
indicates that the voice tag is activated. To activate  
the voice tag, select Add. To play the activated voice command, select  
Play. To use voice commands, see Enhanced voice dialling p. 23.  
To manage the voice commands, scroll to a phone function, and select  
from the following options:  
Edit or Remove — to change or deactivate the voice command of the  
selected function  
57  
     
S e t t i n g s  
Add all or Remove all — to activate or deactivate voice commands to all  
functions in the voice commands list  
Enabling active standby — to select a navigation key for active standby  
Connectivity  
You can connect the phone to a compatible device using a Bluetooth  
wireless technology or a USB data cable connection. You can also define  
the settings for EGPRS dial-up connections.  
Bluetooth wireless technology  
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the  
following profiles: audio/video remote control profile, advanced audio  
distribution profile, audio/video distribution transfer protocol, general audio/  
visual distribution profile, generic access, generic object exchange, hands-free,  
headset, object push, file transfer, dial-up networking, SIM access, and serial  
port. To ensure interoperability between other devices supporting Bluetooth  
technology, use Nokia approved enhancements for this model. Check with the  
manufacturers of other devices to determine their compatibility with this device.  
There may be restrictions on using Bluetooth technology in some locations.  
Check with your local authorities or service provider.  
Features using Bluetooth technology or allowing such features to run in the  
background while using other features, increase the demand on battery power  
and reduce the battery life.  
Bluetooth technology allows you to connect the phone to a compatible  
Bluetooth device within 10 meters (32 feet). Since devices using  
Bluetooth technology communicate using radio waves, your phone and  
the other devices do not need to be in direct line-of-sight, although the  
connection can be subject to interference from obstructions such as  
walls or from other electronic devices.  
Set up a Bluetooth connection  
Select Menu > Settings > Connectivity > Bluetooth and from the  
following options:  
Bluetooth > On or Off — to activate or deactivate the Bluetooth  
function.  
indicates that Bluetooth is activated.  
58  
     
S e t t i n g s  
Search for audio enhanc. — to search for compatible Bluetooth audio  
devices. Select the device that you want to connect to the phone.  
Paired devices — to search for any Bluetooth device in range. Select New  
to list any Bluetooth device in range. Scroll to a device, and select Pair.  
Enter an agreed Bluetooth passcode of the device (up to 16 characters)  
to associate (pair) the device to your phone. You must only give this  
passcode when you connect to the device for the first time. Your phone  
connects to the device, and you can start data transfer.  
Bluetooth wireless connection  
Select Menu > Settings > Connectivity > Bluetooth. To check which  
Bluetooth connection is currently active, select Active devices. To view a  
list of Bluetooth devices that are currently paired with the phone, select  
Paired devices.  
Select Options to access available options depending on the status of  
the device and the Bluetooth connection.  
Bluetooth settings  
To define how your phone is shown to other Bluetooth devices, select  
Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My  
phone's visibility or My phone's name.  
If you are concerned about security, turn off the Bluetooth function, or set My  
phone's visibility to Hidden. Always accept only Bluetooth communication from  
others with whom you agree.  
Packet data (GPRS)  
General packet radio service (GPRS) is a network service that allows  
mobile phones to send and receive data over an internet protocol (IP)  
based network. It enables wireless access to data networks such as the  
internet.  
The applications that may use packet data are MMS, video streaming,  
browsing sessions, e-mail, remote SyncML, Java application  
downloading, and the PC dial-up.  
59  
 
S e t t i n g s  
To define how to use the service, select Menu > Settings >  
Connectivity > Packet data > Packet data connection and from the  
following options:  
When needed — to set the packet data connection to established when  
an application needs it. The connection will be closed when the  
application is terminated.  
Always online — to set the phone to automatically connect to a packet  
data network when you switch the phone on. or indicates that the  
GPRS or EGPRS service is available. If you receive a call or a text  
message or make a call during a packet data connection,  
or  
indicates that the GPRS or EGPRS connection is suspended (on hold).  
Modem settings  
You can connect the phone using Bluetooth wireless technology or USB  
data cable connection to a compatible PC and use the phone as a  
modem to enable EGPRS connectivity from the PC.  
To define the settings for EGPRS connections from your PC, select  
Menu > Settings > Connectivity > Packet data > Packet data settings >  
Active access point, and activate the access point you want to use.  
Select Edit active access point > Alias for access point, enter a name to  
change the access point settings, and select OK. Select Packet data  
access point, enter the access point name to establish a connection to  
an EGPRS network, and select OK.  
You can also set the EGPRS dial-up service settings (access point name)  
on your PC using the Nokia Modem Options software. See Nokia PC  
Suite p. 89. If you have set the settings both on your PC and on your  
phone, the PC settings are used.  
Data transfer  
Synchronise your calendar, contacts data, and notes with another  
compatible device (for example, a mobile phone), a compatible PC, or a  
remote internet server (network service).  
Your phone allows data transfer with a compatible PC or another  
compatible device when using the phone without a SIM card. Note that  
when you use the phone without a SIM card, some functions appear  
60  
   
S e t t i n g s  
dimmed in the menus and cannot be used. Synchronizing with a remote  
internet server is not possible without a SIM card.  
Transfer contact list  
To copy or synchronise data from your phone, the name of the device  
and the settings must be in the list of transfer contacts. If you receive  
data from another device (for example, a compatible mobile phone), the  
corresponding transfer contact is automatically added to the list, using  
the contact data from the other device. Server synchronisation and PC  
synchronisation are the original items in the list.  
To add a new transfer contact to the list (for example, a mobile phone),  
select Menu > Settings > Connectivity > Data transfer > Options > Add  
transfer contact > Phone synchronisation or Phone copy, and enter the  
settings according to the transfer type.  
To edit the copy and synchronise settings, select a contact from the  
transfer contact list and Options > Edit.  
Note: Every individual device must have its own entry in the  
transfer contact list. Using one transfer contact for several  
devices is not possible.  
To delete a transfer contact, select it from the transfer contact list,  
select Options > Delete, and confirm Delete transfer contact?. You  
cannot delete Server synchronisation or PC synchronisation.  
Data transfer with a compatible device  
For synchronization, Bluetooth wireless technology or a cable  
connection is used. The other device is in the standby mode.  
To start data transfer, select Menu > Settings > Connectivity > Data  
transfer and the transfer contact from the list, other than Server  
synchronisation or PC synchronisation. According to the settings, the  
selected data is copied or synchronised. The other device also must be  
activated for receiving data.  
Synchronise from a compatible PC  
Before you synchronise data from calendar, notes, and contacts from a  
compatible PC, you must install the Nokia PC Suite software of your  
61  
S e t t i n g s  
phone on the PC. Use Bluetooth wireless technology or a USB data cable  
for the synchronization, and start the synchronization from the PC.  
Synchronise from a server  
To use a remote internet server, you must subscribe to a synchronization  
service. For more information and the settings required for this service,  
contact your service provider. You may receive the settings as a  
configuration message. See Configuration settings service p. 9 and  
Configuration p. 65.  
If you have saved data on the remote internet server, to synchronise  
your phone, start the synchronization from your phone.  
Select Menu > Settings > Connectivity > Data transfer > Server  
synchronisation. Depending on the settings, select Initialising  
synchronisation or Initialising copy.  
Synchronizing for the first time or after an interrupted synchronization  
may take up to 30 minutes to complete, if the contacts or calendar are  
full.  
USB data cable  
You can use the CA-101 USB data cable to transfer data between the  
phone and a compatible PC with Nokia PC Suite. To activate the phone  
for data transfer, connect the data cable to the phone and PC. See  
Charge the battery with the CA-101 data cable p. 14 for more  
information on connecting the data cable. The phone detects the data  
cable automatically.  
Call  
Select Menu > Settings > Call and from the following options:  
Call divert — to divert your incoming calls (network service). You may  
not be able to divert your calls if some call barring functions are active.  
See Call barring service in Security p. 65.  
Anykey answer > On — to answer an incoming call by briefly pressing  
any key, except the power key, the camera key, the left and right  
selection keys, or the end key  
62  
   
S e t t i n g s  
Slide call handling > Open slide to answer calls — to answer an incoming  
call by opening the slide  
Automatic redial > On — to make a maximum of 10 attempts to connect  
the call after an unsuccessful call attempt  
Speed dialling > On — to dial the names and phone numbers assigned to  
the speed-dialling keys, 2 to 9, by pressing and holding the  
corresponding number key  
Call waiting > Activate — to have the network notify you of an incoming  
call while you have a call in progress (network service). See Call waiting  
p. 24.  
Summary after call > On — to briefly display the approximate duration  
and cost (network service) of the call after each call  
Send my caller ID > Yes — to show your phone number to the person you  
are calling (network service). To use the setting agreed upon with your  
service provider, select Set by network.  
Line for outgoing calls — to select the phone line 1 or 2 for making calls  
if supported by your SIM card (network service). To switch calls with two  
phone lines active, press #  
Slide call handling — to select to answer and end calls by opening and  
closing the slide  
Phone  
Select Menu > Settings > Phone and from the following options:  
Language settings — to set the display language of your phone, select  
Phone language. If you select Automatic, the phone selects the  
language according to the information on the SIM card. To select the  
USIM card language, select SIM language. To set a language for the  
voice playback, select Voice playback language. See Enhanced voice  
dialling p. 23 and Voice commands in My shortcuts p. 56.  
Security keyguard — to set the phone to ask for the security code when  
you unlock the keyguard. Enter the security code, and select On.  
Automatic keyguard — to set a time to automatically activate the  
keyguard  
63  
   
S e t t i n g s  
Welcome note — to write the note you would like to be shown briefly  
when the phone is switched on  
Flight query > On — The phone asks every time when it is switched on  
whether the flight profile shall be used. With flight profile all radio  
connections are switched off. The flight profile should be used in areas  
sensitive to radio emissions.  
Phone updates — to receive phone software updates from your service  
provider (network service). This option may not be available, depending  
on your phone. See Phone software updates p. 66.  
Operator selection > Automatic — To set the phone to automatically,  
select one of the cellular networks available in your area. With Manual  
you can select a network that has a roaming agreement with your  
service provider.  
Confirm SIM serv. actions — See SIM services p. 88.  
Help text activation — to select whether the phone shows help texts  
Start-up tone > On — The phone plays a tone when it is switched on.  
Enhancements  
This menu or the following options are shown only if the phone is or has  
been connected to a compatible mobile enhancement.  
Select Menu > Settings > Enhancements, an enhancement, and  
depending on the enhancement, from the following options:  
Default profile — to select the profile that you want to be automatically  
activated when you connect to the selected enhancement  
Automatic answer — to set the phone to answer an incoming call  
automatically after 5 seconds. If Incoming call alert is set to Beep once  
or Off, automatic answer is off.  
Lights — to set the lights permanently On. Select Automatic to set the  
lights on for 15 seconds after a key press.  
64  
     
S e t t i n g s  
Configuration  
You can configure your phone with settings that are required for certain  
services to function correctly. The services are multimedia messaging,  
IM, synchronization, e-mail application, streaming, and browser. Your  
service provider may also send you these settings. See Configuration  
settings service p. 9.  
Select Menu > Settings > Configuration and from the following  
options:  
Default config. settings — to view the service providers saved in the  
phone. Scroll to a service provider, and select Details to view the  
applications that the configuration settings of this service provider  
support. To set the configuration settings of the service provider as  
default settings, select Options > Set as default. To delete configuration  
settings, select Delete.  
Activ. default in all apps. — to activate the default configuration settings  
for supported applications  
Preferred access point — to view the saved access points. Scroll to an  
access point, and select Options > Details to view the name of the  
service provider, data bearer, and packet data access point or GSM  
dial-up number.  
Connect to serv. support — to download the configuration settings from  
your service provider  
Personal config. settings — to add new personal accounts for various  
services manually, and to activate or delete them. To add a new personal  
account if you have not added any, select Add; otherwise, select  
Options > Add new. Select the service type, and select and enter each of  
the required parameters. The parameters differ according to the selected  
service type. To delete or activate a personal account, scroll to it, and  
select Options > Delete or Activate.  
Security  
When security features that restrict calls are in use (such as call barring, closed  
user group, and fixed dialling) calls still may be possible to the official emergency  
number programmed into your device.  
65  
     
S e t t i n g s  
Select Menu > Settings > Security and from the following options:  
PIN code request and UPIN code request — to set the phone to ask for  
your PIN or UPIN code every time the phone is switched on. Some SIM  
cards do not allow the code request to be turned off.  
PIN2 code request — to select whether the PIN2 code is required when  
using a specific phone feature which is protected by the PIN2 code.  
Some SIM cards do not allow the code request to be turned off.  
Call barring service — to restrict incoming calls to and outgoing calls  
Fixed dialling — to restrict your outgoing calls to selected phone  
numbers if this function is supported by your SIM card  
who can call you (network service)  
Security level > Phone — to set the phone to ask for the security code  
whenever a new SIM card is inserted into the phone. If you select  
Memory, the phone asks for the security code when the SIM card  
memory is selected, and you want to change the memory in use.  
Access codes — to change the security code, PIN code, UPIN code, PIN2  
code, or barring password  
Code in use — to select whether the PIN code or UPIN code should be  
active  
Authority certificates or User certificates — to view the list of the  
authority or user certificates downloaded into your phone. See  
Certificates p. 87.  
Security module settings — to view Security module details, activate  
Module PIN request, or change the module PIN and signing PIN. See also  
Access codes p. 8.  
Phone software updates  
Your service provider may send phone software updates over the air  
directly to your device. This option may not be available, depending on  
your phone.  
66  
 
S e t t i n g s  
Warning: If you install a software update, you cannot use the  
device, even to make emergency calls, until the update is  
completed and the device is restarted. Be sure to backup data  
before accepting a software update.  
Settings  
To allow or disallow phone software updates, select Menu > Settings >  
Configuration > Device manager settings > Service prov. sw updates and  
following options:  
Always allow — to perform all software downloads and updates  
automatically  
Confirm first — to perform software downloads and updates only after  
your confirmation (default setting)  
Always reject — to reject all software updates  
Depending on your settings you will be notified that a software update  
is available for download or has been downloaded and installed  
automatically.  
Request a software update  
Select Menu > Settings > Phone > Phone updates to request available  
phone software updates from your service provider. Select Current  
software details to display the current software version and check  
whether an update is needed. Select Download phone softw. to  
download and install a phone software update. Follow the instructions  
on the display.  
Install a software update  
To start the installation when the installation was cancelled after the  
download, select Install software update.  
The software update may take several minutes. If there are problems  
with the installation, contact your service provider.  
67  
 
G a l l e r y  
Restore factory settings  
To reset some of the menu settings to their original values, select  
Menu > Settings > Restore factory sett.. Enter the security code. The  
names and phone numbers saved in Contacts are not deleted.  
10. Gallery  
In this menu you can manage images, video clips, music  
files, themes, graphics, tones, recordings, and received files. These files  
are stored in the phone memory and may be arranged in folders.  
Your phone supports an activation key system to protect acquired  
content. Always check the delivery terms of any content and activation  
key before acquiring them, as they may be subject to a fee.  
Copyright protections may prevent some images, music (including ringing tones),  
and other content from being copied, modified, transferred or forwarded.  
To see the list of folders, select Menu > Gallery.  
To see the available options of a folder, select a folder > Options.  
To view the list of files in a folder, select a folder > Open.  
To see the available options of a file, select a file > Options.  
Print an image using Bluetooth connectivity  
Images saved in the gallery can be printed using Bluetooth connectivity.  
To send an image to a compatible Bluetooth printer, select Menu >  
Gallery > Images and the image your want to print. Select Options >  
Send > Via Bluetooth. Scroll to the Bluetooth printer shown in the list of  
active devices and press the center selection key.  
68  
   
M e d i a  
11. Media  
When taking and using images or video clips, obey all laws and  
respect local customs as well as privacy and legitimate rights of others.  
Camera  
You can take photos or record video clips with the built-in camera.  
Take a photo  
To start the camera, press the scroll up key, or select Menu > Media >  
Camera.  
To take a picture in  
landscape format, hold  
the phone ina horizontal  
position. Scroll left or  
right to change between  
camera (still image) and  
video mode.  
To zoom in and out in  
the camera mode, scroll  
up and down, or press  
the volume keys.  
To take a photo, select Capture. The phone saves the photo in Gallery >  
Images.  
Select Options to set Night mode on if the lighting is dim, Self-timer on  
to activate the self-timer, or Img. sequence on to take photos in a fast  
sequence. With the highest image size setting three photos are taken in  
a sequence. With other size settings five photos are taken.  
Select Options > Settings >Image preview time and a preview time to  
display the taken photo on the display. During the preview time, select  
Back to take another photo or Send to send the photo as a multimedia  
message.  
Your device supports an image capture resolution up to 1600 x 1200 pixels. The  
image resolution in these materials may appear different.  
69  
     
M e d i a  
Record a video clip  
To record a video, select Menu >Options > Media > Video. To start the  
video recording, select Record. To pause the recording, select Pause; to  
resume the recording, select Continue. To stop the recording, select  
Stop. The phone saves the recording in Gallery > Video clips.  
Camera and video options  
To use a filter with the camera or video, select Options >  
Effects >Normal > False colours, Greyscale, Sepia, Negative, or Solarise.  
To change the camera or video settings, select Options > Settings.  
Media player  
With the media player you can view, play, and download files, such as  
images, audio, video, and animated images. You can also view  
compatible streaming videos from a network server (network service).  
To select or download media, select Menu > Media > Media player >  
Open gallery, Bookmarks, Go to address, or Media downloads.  
To set the step width for fast forward or rewind, select Menu > Media >  
Media player > FF/Rew interval.  
Configuration for a streaming service  
You may receive the configuration settings required for streaming as a  
configuration message from the service provider. See Configuration  
settings service p. 9. You can also enter the settings manually. See  
Configuration p. 65. To activate the settings, do the following:  
1. Select Menu > Media > Media player > Streaming settings >  
Configuration. Only the configurations that support streaming are  
shown.  
2. Select a service provider, Default, or Personal configuration for  
streaming.  
3. Select Account and a streaming service account contained in the  
active configuration settings.  
70  
     
M e d i a  
Music player  
Your phone includes a music player for listening to music tracks,  
recordings, or other mp3 or aac sound files that you have transferred to  
the phone with the Nokia Audio Manager application, which is part of  
Nokia PC Suite. See Nokia PC Suite p. 89.  
Music files stored in a folder in the phone memory are automatically  
detected and added to the default track list.  
To open the music player, select Menu > Media > Music player.  
Play the music tracks  
Warning! Listen to music at a moderate level. Continuous exposure to  
high volume may damage your hearing.  
When you open the Music player menu, the details of the first track on  
the default track list are shown. To play, select  
To adjust the volume level, use the volume keys on the side of the phone.  
To stop the playing, select  
To skip to the next track, select  
previous track, select  
To rewind the current track, select and hold  
.
.
. To skip to the beginning of the  
.
. To fast forward the  
. Release the key at the position you  
current track, select and hold  
want.  
Settings for the music player  
In Music player the following options may be available:  
Track list — View all the tracks available on the track list and play the  
desired track. To play a track, scroll to the desired track, and select Play.  
If you select Options, you can refresh the track list (for example, after  
adding new tracks to the list) and change the track list that is shown  
when you open the Music player menu if several track lists are available  
in the phone. You also may send a track to another phone.  
71  
 
M e d i a  
Play options — Select Random to play the tracks on the track list in  
random order. Select Repeat to play the current track or the entire track  
list repeatedly. Select Music source to select a folder with music tracks.  
Media equaliser — Select or define an equaliser setting. See Equaliser  
p. 74.  
Loudspeaker/Headset — Listen to the music player using the phone  
loudspeaker or headset. (Only if a headset is attached).  
Tip: When using a headset, press the headset key to skip to the  
next track.  
Web page — to access a web page associated with the currently played  
track. This option is dimmed if no web page is available.  
Music downloads — to connect to a browser service related to the  
current track. This function is only available when the address of the  
service is included in the track.  
Radio  
The FM radio depends on an antenna other than the wireless device antenna. A  
compatible headset or enhancement needs to be attached to the device for the  
FM radio to function properly.  
Warning: Listen to music at a moderate level. Continuous exposure to  
high volume may damage your hearing. Do not hold the device near  
your ear when the loudspeaker is in use, because the volume may be  
extremely loud.  
Select Menu > Media > Radio.  
To use the graphical keys  
,
,
, or  
on the display, scroll left or  
right to the desired key, and select it.  
Save radio frequencies  
1. To start the search, select and hold  
or . To change the radio  
frequency in 0.05 MHz steps, briefly press  
or  
.
2. To save a frequency to a memory location, 1 to 9, press and hold the  
corresponding number key. To save a frequency to a memory location  
72  
 
M e d i a  
from 10 to 20, press briefly 1 or 2, and press and hold the desired  
number key, 0 to 9.  
3. Enter the name of the radio station.  
Listen to the radio  
Select Menu > Media > Radio. To scroll to the desired frequency, select  
or  
, or press the headset key. To select a radio station, briefly  
press the corresponding number keys. To adjust the volume, press the  
volume keys.  
Select from the following options:  
Switch off — to turn off the radio  
Save station — to save a new radio station  
Stations — to select the list of saved stations. To delete or rename a  
station, scroll to the desired station, and select Options > Delete station  
or Rename.  
Mono output or Stereo output — to listen to the radio in monophonic  
sound or in stereo  
Loudspeaker or Headset — to listen to the radio using the loudspeaker or  
headset. Keep the headset connected to the phone. The lead of the  
headset functions as the radio antenna.  
Set frequency — to enter the frequency of the desired radio station  
You can normally make a call or answer an incoming call while listening  
to the radio. During the call, the volume of the radio is muted.  
When an application using a packet data or HSCSD connection is  
sending or receiving data, it may interfere with the radio.  
Voice recorder  
You can record pieces of speech, sound, or an active call, and save them  
in Gallery. This is useful when recording a name and phone number to  
write down later.  
The recorder cannot be used when a data call or GPRS connection is active.  
73  
 
M e d i a  
Record sound  
1. Select Menu > Media > Voice recorder.  
To use the graphical keys  
,
, or  
on the display, scroll left or  
right to the desired key, and select it.  
2. To start the recording, select . To start the recording during a call,  
select Options > Record. While recording a call, all parties to the call  
hear a faint beeping sound. When recording a call, hold the phone in  
the normal position near to your ear. To pause the recording,  
select  
.
3. To end the recording, select  
. The recording is saved in Gallery >  
Recordings.  
To listen to the latest recording, select Options > Play last recorded.  
To send the last recording, select Options > Send last recorded.  
To see the list of recordings in Gallery, select Options > Recordings  
list > Recordings.  
Equaliser  
To control the sound quality, use the music player to amplify or diminish  
frequency bands.  
Select Menu > Media > Equaliser.  
To activate a set, scroll to one of the equaliser sets, and select Activate.  
To view, edit, or rename a selected set, select Options > View, Edit, or  
Rename. Not all sets can be edited or renamed.  
Stereo widening  
Stereo widening enhances the audio output of the phone by enabling a  
wider stereo sound effect. To change the setting, select Menu >  
Media > Stereo widening.  
74  
     
O r g a n i s e r  
12. Organiser  
Alarm clock  
You can set the phone to alarm at a desired time. Select Menu >  
Organiser > Alarm clock.  
To set the alarm, select Alarm time, and enter the alarm time. To change  
the alarm time when the alarm time is set, select Alarm time > On and  
change the time.  
To set the phone to repeat the alert on selected days of the week, select  
Repeat alarm.  
To select the alarm tone or set the radio as the alarm tone, select Alarm  
tone. If you select the radio as an alarm tone, connect the headset to the  
phone. The phone uses the last radio station you listened to as the alarm,  
and the alarm plays through the loudspeaker. If you remove the headset  
or switch off the phone, the default alarm tone replaces the radio.  
To set a snooze time-out, select Snooze time-out and the time.  
Stop the alarm  
The phone sounds an alert tone and flashes Alarm! and the current time  
on the display in the standby mode, even if the phone was switched off.  
To stop the alarm, select Stop. If you let the phone continue to sound  
the alarm for a minute or select Snooze, the alarm stops for the time you  
set in Snooze time-out, then resumes.  
If the alarm time is reached while the device is switched off, the device switches  
itself on and starts sounding the alarm tone. If you select Stop, the device asks  
whether you want to activate the device for calls. Select No to switch off the  
device or Yes to make and receive calls. Do not select Yes when wireless phone  
use may cause interference or danger.  
Calendar  
Select Menu > Organiser > Calendar.  
The current day is indicated by a frame. If there are any notes set for the  
day, the day is in bold type, and the beginning of the note is shown  
75  
     
O r g a n i s e r  
below the calendar. To view the day notes, select View. To view a week,  
select Options > Week view. To delete all notes in the calendar, select  
the month or week view, and select Options > Delete all notes.  
Other options for the day view may be to make a note; delete, edit,  
move, or repeat a note; copy a note to another day; send a note with  
Bluetooth technology; or send a note to the calendar of another  
compatible phone as a text message or multimedia message. To set the  
date, time, time zone, date or time format, date separator, default view,  
or the first day of the week, select Settings. To set the phone to delete  
old notes automatically after a specified time, select Auto-delete notes.  
Make a calendar note  
Select Menu > Organiser > Calendar. Scroll to the date, and select  
Options > Make a note and one of the following note types:  
Meeting,  
Call,  
Birthday,  
Memo, or  
Reminder. Fill in  
the fields.  
Note alarm  
The phone displays the note and if set, sounds a tone. With a call note  
(
) on the display, to call the displayed number, press the call key. To  
stop the alarm and to view the note, select View. To stop the alarm for  
10 minutes, select Snooze.  
To stop the alarm without viewing the note, select Exit.  
To-do list  
To save a note for a task that you must do, select Menu > Organiser >  
To-do list.  
To make a note if no note is added, select Add; otherwise, select  
Options > Add. Fill in the fields, and select Save.  
To view a note, scroll to it, and select View. While viewing a note, you  
can select an option to edit the attributes. You can also select an option  
to delete the selected note and delete all the notes that you have  
marked as done.  
76  
 
O r g a n i s e r  
You can sort the notes by priority or by deadline, send a note to another  
phone as a text message or a multimedia message, save a note as a  
calendar note, or access the calendar.  
Notes  
To write and send notes, select Menu > Organiser > Notes.  
To make a note if no note is added, select Add; otherwise, select  
Options > Make a note. Write the note, and select Save.  
Other options include deleting and editing a note. While editing a note,  
you can also exit the text editor without saving the changes. You can  
send the note to compatible devices by Bluetooth wireless technology,  
text message, or a multimedia message.  
Calculator  
The calculator in your phone provides basic arithmetic and  
trigonometric functions, calculates the square and the square root, the  
inverse of a number, and converts currency values.  
Note: This calculator has limited accuracy and is designed for simple  
calculations.  
Select Menu > Organiser > Calculator. When 0 is displayed on the  
screen, enter the first number in the calculation. Press # for a decimal  
point. Scroll to the desired operation or function or select it from  
Options. Enter the second number. Repeat this sequence as many times  
as it is necessary. To start a new calculation, first select and hold Clear.  
To perform a currency conversion, select Menu > Organiser >  
Calculator. To save the exchange rate, select Options > Exchange rate.  
Select either of the displayed options. Enter the exchange rate, press #  
for a decimal point, and select OK. The exchange rate remains in the  
memory until you replace it with another one. To perform the currency  
conversion, enter the amount to be converted, and select Options > In  
domestic or In foreign.  
Note:Whenyouchangetoadifferentbasecurrency, youmustenternew  
exchange rates because all previously set exchange rates are cleared.  
77  
   
O r g a n i s e r  
Countdown timer  
Select Menu > Organiser > Countdown timer. Enter the alarm time in  
hours, minutes, and seconds, and select OK. If you wish, write your own  
note text that is displayed when the time expires. To start the  
countdown timer, select Start. To change the countdown time, select  
Change time. To stop the timer, select Stop timer.  
If the alarm time is reached when the phone is in the standby mode, the  
phone sounds a tone and flashes the note text if it is set or displays  
Countdown time up. To stop the alarm, press any key. If no key is  
pressed, the alarm automatically stops within 60 seconds. To stop the  
alarm and delete the note text, select Exit. To restart the countdown  
timer, select Restart.  
Stopwatch  
You can measure time, take intermediate times, or take lap times using  
the stopwatch. During timing, the other functions of the phone can be  
used. To set the stopwatch timing in the background, press the end key.  
Using the stopwatch or allowing it to run in the background when using other  
features increases the demand on battery power and reduces the battery life.  
Select Menu > Organiser > Stopwatch and from the following options:  
Split timing — to take intermediate times. To start the time observation,  
select Start. Select Split every time that you want to take an  
intermediate time. To stop the time observation, select Stop.  
To save the measured time, select Save.  
To start the time observation again, select Options > Start. The new  
time is added to the previous time. To reset the time without saving it,  
select Reset.  
Lap timing — to take lap times. Select Lap again each time you want to  
take an intermediate time  
Continue — to view the timing that you have set in the background  
Show last — to view the most recently measured time if the stopwatch is  
not reset  
View times or Delete times — to view or delete the saved times  
78  
   
A p p l i c a t i o n s  
13. Applications  
Applications appears as Apps. in the main menu.  
In this menu you can manage applications and games. These files are  
stored in the phone memory and may be arranged in folders.  
Launch a game  
Your phone software includes some games.  
Select Menu > Apps. > Games. Scroll to the desired game, and select  
Open.  
To set sounds, lights, and shakes for the game, select Menu > Apps. >  
Options > Application settings.  
Launch an application  
Your phone software includes some Java applications.  
Select Menu > Apps. > Collection. Scroll to an application, and select  
Open.  
Some application options  
Delete — to delete the application from the phone  
Details — to give additional information about the application  
Update version — to check if a new version of the application is available  
for download from Web (network service)  
Application access — to restrict the application from accessing the  
network. Different categories are shown. Select in each category one of  
the available permissions.  
Web page — to provide further information or additional data for the  
application from an internet page (network service). It is only shown if  
an internet address has been provided with the application.  
79  
     
A p p l i c a t i o n s  
Download an application  
Your phone supports J2ME Java applications. Make sure that the  
application is compatible with your phone before downloading it.  
Important: Only install and use applications and other software from  
sources that offer adequate security and protection against harmful  
software.  
You can download new Java applications and games in different ways.  
Use the Nokia Application Installer from PC Suite to download the  
applications to your phone, or select Menu > Apps. > Options >  
Downloads > Application downloads; the list of available bookmarks is  
shown. See Bookmarks p. 84.  
For the availability of different services, pricing, and tariffs, contact your  
service provider.  
Your device may have some bookmarks loaded for sites not affiliated with Nokia.  
Nokia does not warrant or endorse these sites. If you choose to access them, you  
should take the same precautions, for security or content, as you would with any  
internet site.  
Presenter  
The presenter enables you to control slide presentations (compatible  
with Microsoft Office PowerPoint), a software DVD, an MP3 player, or  
other PC applications remotely from your device.  
To use applications other than slide presentations and desktop mode,  
you must create a corresponding custom profile on the PC application.  
Before you can use the application you must do the following:  
1. Install the Nokia Presenter PC application on your PC. This  
component is available for download on the Nokia website. See  
Nokia support p. 10.  
2. Launch and configure the PC component. Make sure that the  
selected incoming Bluetooth serial port (COM port) corresponds to  
the one defined in the Bluetooth software settings on the Bluetooth  
device of your PC. For details, refer to the PC component  
documentation and Set up a Bluetooth connection p. 58.  
80  
 
W e b  
3. Open the slide presentation, or start the application you want to  
control remotely from your phone.  
Select Apps. > Collection > Presenter > Connect and the device you  
want to connect to.  
When the Bluetooth Connection Successful dialog appears on your PC  
screen, you must click on it to confirm the Bluetooth connection.  
The list of available application types is displayed. Select Open to access  
the desired application. Select Options > Settings to set the Speaker  
notes size for the speaker notes, and Presentation timer (in minutes) to  
optimise the slide presentation time available. To save the settings,  
select Options > Back.  
After you select the slide presentation, browse or skip slides, or jump  
ahead by using the scroll key. To view your speaker notes, select Notes.  
To point things out on the slides, select Pointer to activate a small black  
round marker that you control with the scroll key. Select Options >  
Slide list to return to the slide list. Select Options > Applications list to  
return to the list of applications.  
To control the mouse pointer (the cursor) remotely from the phone,  
select the desktop mode. After you open the desktop, the phone  
automatically controls your mouse pointer. To return to the list of  
applications, select Options > Applications list.  
To quit the presenter, select Options > Exit.  
14. Web  
You can access various mobile internet services with your  
phone browser.  
Important: Use only services that you trust and that offer adequate  
security and protection against harmful software.  
Check the availability of these services, pricing, tariffs, and instructions  
with your service provider.  
81  
 
W e b  
With the phone browser you can view the services that use wireless  
markup language (WML) or extensible hypertext markup language  
(XHTML) on their pages. Appearance may vary due to screen size. You  
may not be able to view all details of the internet pages.  
Set up browsing  
You may receive the configuration settings required for browsing as a  
configuration message from the service provider that offers the service  
that you want to use. See Configuration settings service p. 9. You can  
also enter all the configuration settings manually. See Configuration  
p. 65.  
Connect to a service  
Ensure that the correct configuration settings of the service are  
activated.  
1. To select the settings for connecting to the service, select Menu >  
Web > Settings > Configuration settings.  
2. Select Configuration. Only the configurations that support the  
browsing service are shown. Select a service provider, Default, or  
Personal configuration for browsing. See Set up browsing p. 82.  
3. Select Account and a browsing service account contained in the  
active configuration settings.  
4. Select Display terminal window > Yes to perform manual user  
authentication for intranet connections.  
Make a connection to the service in one of the following ways:  
• Select Menu > Web > Home; or in the standby mode, press and hold  
0.  
• To select a bookmark of the service, select Menu > Web >  
Bookmarks.  
• To select the last URL, select Menu > Web > Last web address.  
• To enter the address of the service, select Menu > Web > Go to  
address. Enter the address of the service, and select OK.  
82  
     
W e b  
Browse pages  
After you make a connection to the service, you can start browsing its  
pages. The function of the phone keys may vary in different services.  
Follow the text guides on the phone display. For more information,  
contact your service provider.  
Browse with phone keys  
To browse through the page, scroll in any direction.  
To select a highlighted item, press the call key, or select Select.  
To enter letters and numbers, press the 0 to 9 keys. To enter special  
characters, press *.  
Options while browsing  
Select from the following options:  
Home — to return to your start page  
Shortcuts — to open a new list of options that are specific to the page.  
This option is only available if the page contains shortcuts.  
Add bookmark — to save the page as a bookmark  
Bookmarks — to access the list of bookmarks. See Bookmarks p. 84.  
Page options — to show the list of options for the active page  
History — to get a list showing the last visited URLs  
Downloads — to show the list of bookmarks for downloading  
Other options — to show a list of other options  
Reload — to reload and update the current page  
The service provider may also offer other options.  
Direct calling  
While browsing, you can make a phone call and save a name and a  
phone number from a page.  
83  
 
W e b  
Bookmarks  
You can save page addresses as bookmarks in the phone memory.  
1. While browsing, select Options > Bookmarks; or in the standby  
mode, select Menu > Web > Bookmarks.  
2. Scroll to a bookmark, and select it, or press the call key to make a  
connection to the page associated with the bookmark.  
3. Select Options to view, edit, delete, or send the bookmark; to create  
a new bookmark; or to save the bookmark to a folder.  
Your device may have some bookmarks loaded for sites not affiliated with Nokia.  
Nokia does not warrant or endorse these sites. If you choose to access them, you  
should take the same precautions, for security or content, as you would with any  
internet site.  
Receive a bookmark  
When you have received a bookmark that is sent as a bookmark, 1  
bookmark received is displayed. To view the bookmark, select Show.  
Appearance settings  
While browsing, select Options > Other options > Appearance settings;  
or in the standby mode, select Menu > Web > Settings > Appearance  
settings and from the following options:  
Text wrapping > On — to set the text to continue on the next line on the  
display. If you select Off, the text is abbreviated.  
Font size — to set the font size  
Show images > No — to hide pictures on the page. This can speed up the  
browsing of pages that contain a lot of pictures.  
Alerts > Alert for unsecure conn. > Yes — to set the phone to alert when  
a secure connection changes to an unsecure one during browsing  
Alerts > Alert for unsecure items > Yes — to set the phone to alert when  
a secure page contains an unsecure item. These alerts do not guarantee  
a secure connection. For more information, see Browser security p. 87.  
84  
   
W e b  
Character encoding > Content encoding — to select the encoding for the  
browser page content  
Character encoding > Unicode (UTF-8) web add. > On — to set the  
phone to send a URL as a UTF-8 encoding. You may need this setting  
when you access a web page created in foreign language.  
Screen size > Full or Small — to set the screen layout  
JavaScript > Enable — to enable the Java scripts  
Security settings  
Cookies  
A cookie is data that a site saves in the cache memory of your phone.  
Cookies are saved until you clear the cache memory. See Cache memory  
p. 86.  
While browsing, select Options > Other options > Security > Cookie  
settings; or in the standby mode, select Menu > Web > Settings >  
Security settings > Cookies. To allow or prevent the phone from  
receiving cookies, select Allow or Reject.  
Scripts over secure connection  
You can select whether to allow the running of scripts from a secure  
page. The phone supports WML scripts.  
While browsing, to allow the scripts, select Options > Other options >  
Security > WMLScript settings; or in the standby mode, select Menu >  
Web > Settings > Security settings > WMLScripts in sec. conn. > Allow.  
Download settings  
To automatically save all downloaded files in Gallery, select Menu >  
Web > Settings > Downloading settings > Automatic saving > On.  
Service inbox  
The phone is able to receive service messages sent by your service  
provider (network service). Service messages are notifications (for  
85  
       
W e b  
example, news headlines), and they may contain a text message or an  
address of a service.  
To access the Service inbox in the standby mode, when you have  
received a service message, select Show. If you select Exit, the message  
is moved to the Service inbox. To access the Service inbox later, select  
Menu > Web > Service inbox.  
To access the Service inbox while browsing, select Options > Other  
options > Service inbox. Scroll to the message you want. To activate the  
browser and download the marked content, select Retrieve. To display  
detailed information on the service notification or to delete the  
message, select Options > Details or Delete.  
Service inbox settings  
Select Menu > Web > Settings > Service inbox settings.  
To set whether you want to receive service messages, select Service  
messages > On or Off.  
To set the phone to receive service messages only from content authors  
approved by the service provider, select Message filter > On. To view the  
list of the approved content authors, select Trusted channels.  
To set the phone to automatically activate the browser from the standby  
mode when the phone has received a service message, select Automatic  
connection > On. If you select Off, the phone activates the browser only  
after you select Retrieve when the phone has received a service  
message.  
Cache memory  
A cache is a memory location that is used to store data temporarily. If you have  
tried to access or have accessed confidential information requiring passwords,  
empty the cache after each use. The information or services you have accessed is  
stored in the cache.  
To empty the cache while browsing, select Options > Other options >  
Clear the cache; in the standby mode, select Menu > Web > Clear the  
cache.  
86  
   
W e b  
Browser security  
Security features may be required for some services, such as online  
banking or shopping. For such connections you need security  
certificates and possibly a security module, which may be available on  
your SIM card. For more information, contact your service provider.  
Security module  
The security module improves security services for applications  
requiring a browser connection, and allows you to use a digital  
signature. The security module may contain certificates as well as  
private and public keys. The certificates are saved in the security module  
by the service provider.  
To view or change the security module settings, select Menu >  
Settings > Security > Security module settings.  
Certificates  
Important: Even if the use of certificates makes the risks involved in  
remote connections and software installation considerably smaller,  
they must be used correctly in order to benefit from increased security.  
The existence of a certificate does not offer any protection by itself; the  
certificate manager must contain correct, authentic, or trusted  
certificates for increased security to be available. Certificates have a  
restricted lifetime. If Expired certificate or Certificate not valid yet is  
shown even if the certificate should be valid, check that the current  
date and time in your device are correct.  
Before changing any certificate settings, you must make sure that you  
really trust the owner of the certificate and that the certificate really  
belongs to the listed owner.  
There are three kinds of certificates: server certificates, authority  
certificates, and user certificates. You may receive these certificates  
from your service provider. Authority certificates and user certificates  
may also be saved in the security module by the service provider.  
To view the list of the authority or user certificates downloaded into  
your phone, select Menu > Settings > Security > Authority certificates  
or User certificates.  
87  
     
S I M s e r v i c e s  
is displayed during a connection, if the data transmission between  
the phone and the content server is encrypted.  
The security icon does not indicate that the data transmission between the  
gateway and the content server (or place where the requested resource is stored)  
is secure. The service provider secures the data transmission between the  
gateway and the content server.  
Digital signature  
You can make digital signatures with your phone if your SIM card has a  
security module. Using the digital signature can be the same as signing  
your name to a paper bill, contract, or other document.  
To make a digital signature, select a link on a page, for example, the title  
of the book you want to buy and its price. The text to sign, which may  
include the amount and date, is shown.  
Check that the header text is Read and that the digital signature icon  
(
) is shown.  
If the digital signature icon does not appear, there is a security breach,  
and you should not enter any personal data such as your signing PIN.  
To sign the text, read all of the text first, and select Sign.  
The text may not fit within a single screen. Therefore, make sure to scroll  
through and read all of the text before signing.  
Select the user certificate you want to use. Enter the signing PIN (see  
Access codes p. 8), and select OK. The digital signature icon disappears,  
and the service may display a confirmation of your purchase.  
15. SIM services  
Your SIM card may provide additional services. You can  
access this menu only if it is supported by your SIM card. The name and  
contents of the menu depend on the available services.  
For availability and information on using SIM card services, contact your SIM  
card vendor. This may be the service provider, network operator, or other vendor.  
88  
   
P C c o n n e c t i v i t y  
To set the phone to show you the confirmation messages sent between  
your phone and the network when you are using the SIM services, select  
Menu > Settings > Phone > Confirm SIM serv. actions > Yes.  
Accessing these services may involve sending messages or making a  
phone call for which you may be charged.  
16. PC connectivity  
You can send and receive e-mail, and access the internet when your  
phone is connected to a compatible PC through a Bluetooth or a data  
cable connection. You can use your phone with a variety of PC  
connectivity and data communications applications.  
Nokia PC Suite  
With Nokia PC Suite you can synchronise contacts, calendar, notes, and  
to-do notes between your phone and the compatible PC or a remote  
internet server (network service). You can find more information and PC  
Suite on the Nokia website at www.nokia.com/support. Download  
version 6.83 or higher for your device.  
EGPRS, HSCSD, and CSD  
With your phone you can use the enhanced GPRS (EGPRS), general  
packet radio service (GPRS), high-speed circuit switched data (HSCSD),  
and circuit switched data (CSD, GSM data) data services.  
For availability and subscription to data services, contact your network  
operator or service provider.  
The use of HSCSD services consumes the phone battery faster than  
normal voice or data calls. You may need to connect the phone to a  
charger for the duration of data transfer.  
See Modem settings p. 60.  
89  
       
B a t t e r y i n f o r m a t i o n  
Data communication applications  
For information on using a data communication application, refer to the  
documentation provided with it.  
Making or answering phone calls during a computer connection is not  
recommended, as it might disrupt the operation.  
For better performance during data calls, place the phone on a  
stationary surface with the keypad facing downward. Do not move the  
phone by holding it in your hand during a data call.  
17. Battery information  
Charging and discharging  
Your device is powered by a rechargeable battery. The full performance of a new  
battery is achieved only after two or three complete charge and discharge cycles.  
The battery can be charged and discharged hundreds of times, but it will  
eventually wear out. When the talk and standby times are noticeably shorter  
than normal, replace the battery. Use only Nokia approved batteries, and  
recharge your battery only with Nokia approved chargers designated for this  
device.  
If a replacement battery is being used for the first time or if the battery has not  
been used for a prolonged period, it may be necessary to connect the charger and  
then disconnect and reconnect it to start the charging.  
Unplug the charger from the electrical plug and the device when not in use. Do  
not leave fully charged battery connected to a charger, since overcharging may  
shorten its lifetime. If left unused, a fully charged battery will lose its charge over  
time.  
If the battery is completely discharged, it may take a few minutes before the  
charging indicator appears on the display or before any calls can be made.  
Use the battery only for its intended purpose. Never use any charger or battery  
that is damaged.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object such as a coin, clip, or pen causes direct connection of the  
positive (+) and negative (-) terminals of the battery. (These look like metal strips  
on the battery.) This might happen when you carry a spare battery in your pocket  
90  
     
B a t t e r y i n f o r m a t i o n  
or purse. Short-circuiting the terminals may damage the battery or the  
connecting object.  
Leaving the battery in hot or cold places, such as in a closed car in summer or  
winter conditions, will reduce the capacity and lifetime of the battery. Always try  
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot  
or cold battery may not work temporarily, even when the battery is fully charged.  
Battery performance is particularly limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also  
explode if damaged. Dispose of batteries according to local regulations. Please  
recycle when possible. Do not dispose as household waste.  
Nokia battery authentication  
Always use original Nokia batteries for your safety. To check that you are getting  
an original Nokia battery, purchase it from an authorised Nokia dealer, look for  
the Nokia Original Enhancements logo on the packaging, and inspect the  
hologram label using the following steps:  
Successful completion of the four steps is not a total assurance of the  
authenticity of the battery. If you have any reason to believe that your battery is  
not an authentic original Nokia battery, you should refrain from using it, and take  
it to the nearest authorised Nokia service point or dealer for assistance. Your  
authorised Nokia service point or dealer will inspect the battery for authenticity.  
If authenticity cannot be verified, return the battery to the place of purchase.  
Authenticate hologram  
1. When looking at the hologram on the label, you  
should see the Nokia connecting hands symbol from  
one angle and the Nokia Original Enhancements  
logo when looking from another angle.  
2. When you angle the hologram left, right, down, and  
up, you should see 1, 2, 3, and 4 dots on each side  
respectively.  
91  
 
B a t t e r y i n f o r m a t i o n  
3. Scratch the side of the label to reveal a 20-digit  
code, for example, 12345678919876543210. Turn  
the battery so that the numbers are facing upwards.  
The 20-digit code reads starting from the number at  
the top row followed by the bottom row.  
4. Confirm that the 20-digit code is valid by following  
the instructions at www.nokia.com/batterycheck.  
To create a text message, enter the 20-digit code, for  
example, 12345678919876543210, and send to +44  
7786 200276.  
National and international operator charges will apply.  
You should receive a message indicating whether the code can be authenticated.  
What if your battery is not authentic?  
If you cannot confirm that your Nokia battery with the hologram on the label is  
an authentic Nokia battery, please do not use the battery. Take it to the nearest  
authorised Nokia service point or dealer for assistance. The use of a battery that  
is not approved by the manufacturer may be dangerous and may result in poor  
performance and damage to your device and its enhancements. It may also  
invalidate any approval or warranty applying to the device.  
To find out more about original Nokia batteries, visit  
www.nokia.com/batterycheck.  
92  
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The suggestions below will help you protect your warranty  
coverage.  
Keep the device dry. Precipitation, humidity and all types of liquids or  
moisture can contain minerals that will corrode electronic circuits. If your  
device does get wet, remove the battery and allow the device to dry  
completely before replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean  
the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
Do not touch the display with hard or angular materials. Objects like earrings  
or jewelry may scratch the display.  
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity  
sensor, and light sensor lenses).  
Use only the supplied or an approved replacement antenna. Unauthorised  
antennas, modifications, or attachments could damage the device and may  
violate regulations governing radio devices.  
Use chargers indoors.  
Always create a backup of data you want to keep (such as contacts and  
calendar notes) before sending your device to a service facility.  
All of the above suggestions apply equally to your device, battery, charger, or any  
enhancement. If any device is not working properly, take it to the nearest  
authorised service facility for service.  
93  
 
C a r e a n d m a i n t e n a n c e  
Disposal  
The crossed-out wheeled-bin symbol on your product, literature, or  
packaging reminds you that in the European Union all electrical and  
electronic products, batteries, and accumulators must be taken to  
separate collection at the end of their working life. Do not dispose of  
these products as unsorted municipal waste.  
Return the products to collection to prevent possible harm to the  
environment or human health from uncontrolled waste disposal and to  
promote the sustainable reuse of material resources. Collection  
information is available from the product retailer, local waste authorities,  
national producer responsibility organizations, or your local Nokia  
representative. For more information, see product Eco-Declaration or  
country-specific information at www.nokia.com.  
94  
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Additional safety information  
Small children  
Your device and its enhancements may contain small parts. Keep them out of the  
reach of small children.  
Operating environment  
Remember to follow any special regulations in force in any area, and always  
switch off your device when its use is prohibited or when it may cause  
interference or danger. Use the device only in its normal operating positions. This  
device meets RF exposure guidelines when used either in the normal use position  
against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from  
the body. When a carry case, belt clip or holder is used for body-worn operation,  
it should not contain metal and should position the device the above-stated  
distance from your body.  
To transmit data files or messages, this device requires a quality connection to  
the network. In some cases, transmission of data files or messages may be  
delayed until such a connection is available. Ensure that the above separation  
distance instructions are followed until the transmission is completed.  
Parts of the device are magnetic. Metallic materials may be attracted to the  
device. Do not place credit cards or other magnetic storage media near the  
device, because information stored on them may be erased.  
Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may  
interfere with the functionality of inadequately protected medical devices.  
Consult a physician or the manufacturer of the medical device to determine if  
they are adequately shielded from external RF energy or if you have any  
questions. Switch off your device in health care facilities when any regulations  
posted in these areas instruct you to do so. Hospitals or health care facilities may  
be using equipment that could be sensitive to external RF energy.  
Implanted medical devices  
Manufacturers of medical devices recommend that a minimum separation of  
15.3 centimeters (6 inches) should be maintained between a wireless device and  
an implanted medical device, such as a pacemaker or implanted cardioverter  
defibrillator, to avoid potential interference with the medical device. Persons  
who have such devices should:  
95  
     
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Always keep the wireless device more than 15.3 centimeters (6 inches) from  
the medical device when the wireless device is turned on.  
Not carry the wireless device in a breast pocket.  
Hold the wireless device to the ear opposite the medical device to minimize  
the potential for interference.  
Turn the wireless device off immediately if there is any reason to suspect that  
interference is taking place.  
Read and follow the directions from the manufacturer of their implanted  
medical device.  
If you have any questions about using your wireless device with an implanted  
medical device, consult your health care provider.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids. If  
interference occurs, consult your service provider.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles such as electronic fuel injection systems, electronic  
antiskid (antilock) braking systems, electronic speed control systems, and air bag  
systems. For more information, check with the manufacturer or its representative  
of your vehicle or any equipment that has been added.  
Only qualified personnel should service the device, or install the device in a  
vehicle. Faulty installation or service may be dangerous and may invalidate any  
warranty that may apply to the device. Check regularly that all wireless device  
equipment in your vehicle is mounted and operating properly. Do not store or  
carry flammable liquids, gases, or explosive materials in the same compartment  
as the device, its parts, or enhancements. For vehicles equipped with an air bag,  
remember that air bags inflate with great force. Do not place objects, including  
installed or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If in-vehicle wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device  
before boarding an aircraft. The use of wireless teledevices in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the wireless telephone  
network, and may be illegal.  
96  
   
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Potentially explosive environments  
Switch off your device when in any area with a potentially explosive atmosphere  
and obey all signs and instructions. Potentially explosive atmospheres include  
areas where you would normally be advised to turn off your vehicle engine.  
Sparks in such areas could cause an explosion or fire resulting in bodily injury or  
even death. Switch off the device at refueling points such as near gas pumps at  
service stations. Observe restrictions on the use of radio equipment in fuel  
depots, storage, and distribution areas; chemical plants; or where blasting  
operations are in progress. Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include below deck on boats, chemical  
transfer or storage facilities, vehicles using liquefied petroleum gas (such as  
propane or butane), and areas where the air contains chemicals or particles such  
as grain, dust, or metal powders.  
Emergency calls  
Important: Wireless phones, including this device, operate using radio  
signals, wireless networks, landline networks, and user-programmed  
functions. Because of this, connections in all conditions cannot be  
guaranteed. You should never rely solely on any wireless device for  
essential communications like medical emergencies.  
To make an emergency call:  
1. If the device is not on, switch it on. Check for adequate signal strength.  
Some networks may require that a valid SIM card is properly inserted in the  
device.  
2. Press the end key as many times as needed to clear the display and ready the  
device for calls.  
3. Enter the official emergency number for your present location. Emergency  
numbers vary by location.  
4. Press the call key.  
If certain features are in use, you may first need to turn those features off before  
you can make an emergency call. Consult this guide or your service provider for  
more information.  
When making an emergency call, give all the necessary information as accurately  
as possible. Your wireless device may be the only means of communication at the  
scene of an accident. Do not end the call until given permission to do so.  
97  
   
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Certification information (SAR)  
This mobile device meets guidelines for exposure to radio waves  
Your mobile device is a radio transmitter and receiver. It is designed not to  
exceed the limits for exposure to radio waves recommended by international  
guidelines. These guidelines were developed by the independent scientific  
organization ICNIRP and include safety margins designed to assure the  
protection of all persons, regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known  
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP  
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests  
for SAR are conducted using standard operating positions with the device  
transmitting at its highest certified power level in all tested frequency bands. The  
actual SAR level of an operating device can be below the maximum value  
because the device is designed to use only the power required to reach the  
network. That amount changes depending on a number of factors such as how  
close you are to a network base station. The highest SAR value under the ICNIRP  
guidelines for use of the device at the ear is 0.88 W/kg.  
Use of device accessories and enhancements may result in different SAR values.  
SAR values may vary depending on national reporting and testing requirements  
and the network band. Additional SAR information may be provided under  
product information at www.nokia.com.  
98  
 
Index  
A
access codes 8  
accessories. See enhancements.  
active standby 20, 54  
alarm clock 75  
answer calls 24  
antenna 17  
applications  
care 93  
certificates 87  
character case 26  
circuit switched data 89  
codes 8, 9  
collection 79  
download 10  
audio messages 33  
configuration 65  
setting service 9  
settings 15  
CSD. See circuit switched data.  
B
barring password 9  
battery  
authentication 91  
charging 13, 90  
discharging 90  
installation 11  
blacklist 37  
D
Bluetooth 58  
bookmarks 84  
browser  
data  
transfer 60  
appearance settings 84  
bookmarks 84  
browsing pages 83  
cache memory 86  
certificates 87  
cookies 85  
digital signature 88  
security 85  
security module 87  
set up 82  
data cable 62  
date settings 56  
delete messages 43  
digital signature 88  
display 19, 54  
downloads  
applications 10  
content 10  
settings 85  
business cards 50  
E
C
EGPRS 59  
cache memory 86  
calculator 77  
calendar 75  
call  
EGPRS. See packet data.  
e-mail application 34  
emergency calls 97  
end  
functions 23  
log 52  
call 23  
enhancements 7, 64  
equaliser 74  
explosive environments 97  
options 25  
settings 62  
waiting 24  
call log 52  
99  
 
F
M
factory settings 68  
flash messages 33  
FM radio 72  
menu 25  
G
message  
gallery 68  
games 79  
GPRS 59  
folder 32  
message settings  
e-mail 45  
general settings 43  
H
handsfree. See loudspeaker.  
hearing aid 96  
high-speed circuit switched data 89  
HSCSD. See high-speed circuit switched  
data.  
delete 43  
flash message 33  
info messages 42  
I
IMAP4 34  
indicators 21  
info messages 42  
installation  
battery 11  
MMS. See multimedia messages.  
multimedia messages  
create 30  
SIM card 11  
instant messaging 37  
Internet  
J
read 31  
junk folder 37  
reply 31  
send 30  
write 30  
K
music player 71  
keyguard 22  
keypad lock 22  
keys  
N
keyguard 22  
keypad lock 22  
selection keys 19  
navigation 25  
navigation key 57  
network  
name on display 19  
services 6  
L
Nokia contact information 10  
notes 77  
language settings 63  
light indicator 55  
lights 64  
O
location information 52  
log 52  
offline mode 22  
organiser 75  
overview functions 8  
loudspeaker 25  
100  
SAR 98  
P
pacemakers 95  
packet data 59, 89  
parts 18  
PC connectivity 89  
PC Suite 89  
phone  
module 87  
settings 65  
selection keys 19  
care 93  
configuration 65  
keys 18  
maintenance 93  
open 19  
services  
parts 18  
settings 55  
settings 63  
call 62  
updates 64, 67  
phone lock. See keypad lock.  
PictBridge 62  
PIN codes 8, 15  
plug and play service 15  
POP3 34  
clock 56  
configuration 65  
connectivity 58  
data transfer 60  
date 56  
positioning 52  
powersaver 55  
predictive text input 26  
presence 48  
display 54  
messages 43  
my shortcuts 56  
presenter 80  
profiles 53  
PUK codes 9  
pushed messages 85  
restore factory settings 68  
screen saver 54  
security 65  
service inbox 86  
slide animation 54  
standby mode 54  
themes 53  
time 56  
tones 53  
R
radio 72  
record sound 74  
recorder 73  
reject calls 24  
repair service 10  
ringing tones 53  
USB data cable 62  
wallpaper 54  
shared memory 7  
shortcuts 20, 56  
signal strength 19  
SIM  
S
safety  
additional information 95  
certification information 98  
emergency calls 97  
explosive environments 97  
guidelines 5  
card 22  
card installation 11  
messages 29  
services 88  
hearing aid 96  
medical devices 95  
operating environment 95  
pacemakers 95  
sleep mode 55  
slide animation 54  
SMS. See text messages  
software updates 64, 67  
spam filter 37  
SAR 98  
vehicles 96  
101  
speed dialling 23, 51  
standby mode 19, 56  
status indicators 19  
stereo widening 74  
stopwatch 78  
U
unlock keypad 22  
UPIN 15  
streaming service 70  
subscribed names 49  
support 10  
V
vehicles 96  
voice  
switch on and off 15  
synchronisation 60  
commands 57  
messages 42  
recorder 73  
T
text  
W
character case 26  
message 28  
wallpaper 54  
Web  
predictive text input 26  
traditional text input 27  
writing 26  
bookmarks 84  
connect 82  
wireless markup language 82  
write text 26  
themes 53  
time settings 56  
to-do list 76  
X
tones 53  
traditional text input 27  
XHTML 82  
102  

Technicolor Thomson LAD870U User Manual
Sony SCD 555ES User Manual
Sony CDX C6850R User Manual
Siemens Mux_guide_v06 User Manual
Sharp SCH R850 User Manual
Seagate SV355 SERIES SATA ST31000525SV User Manual
Seagate MOMENTUS ST9160314ASG User Manual
Roberts Radio CR9986 User Manual
Philips 659 User Manual
Oricom PMR3000 User Manual