OWNER'S MANUAL
COMPACT DISC PLAYER WITH
AUXILIARY INPUT AND
SUPER POWER OUTPUT
FOLD DOWN FACE DETACHABLE PANEL
FM-AM FM-MPX RADIO RECEIVER
WITH REMOTE CONTROL
MODEL : LCD97DFX
P / N : 570-991612-06
9. EJECT BUTTON
Press the button to eject the disc inside disc slot.
10. PANEL RELEASE BUTTON (FIGURE A)
To detach the front panel, press the release button so that the panel fold down from vertical position to
horizontal position and then pull it off of the chassis at horizontal position.
To re-attach the panel, push the fold-down metal frame forward until it locks to the original postion. Then, put the
panel at the right side of the position first and then press the left side of the panel until the mechanism lock it
into place.
11. MODE SELECTION
Press this button to select Radio (TUNER), CD (S-CDP), or Auxiliary input (AUX) mode.
12. LOCAL/DISTANT SELECTOR
Press this button to prevent strong local stations from overlapping weaker stations. For normal operation, press
this button again for distance.
13. LOUD CONTROL
Press this button to activate the loudness circuitry which compensates for loss of high and low frequencies
during low volume levels.
14. MUTE CONTROL
Press this button to mute the volume control and “MUT” will appear on LCD display.
15. AUDIO / SETTING SELECT
Briefly press the button to select volume, bass, treble, balance or fader adjustment in cyclical mode.
Whenpressingthebuttonformorethan2seconds, itactivatesasunitsettingselectionincyclicalmodeas
following. Theunitsettingcanbechangedbyusingeither“VOL+”or“VOL–”button.
· DSP OFF/ POP M/ ROCK M/ CLASS M/ FLAT M
· BEEP OFF/ BEEP ON(notavailableforthismodel)
· SEEK 1(tuneup/downbuttonperformsfasttunefunction)/ SEEK 2(performsautotuningfunctionwhentuneup/
downbuttonpressedmorethan1second)
· COLOR1/COLOR2(notavailableforthismodel)
· VOLLAST/VOLADJ(presetvolumelevelwhenunitturnon)
16/17. AUDIO LEVEL DOWN/UP CONTROL ( - Button ) / ( + Button )
Press “SEL” button shortly and then pressing “+” or “-” button to adjust level of volume, bass, treble, balance or fader.
• VOLUME - Press the (+) button to increase, or (-) button to decrease volume level.
• BASS - While “BASS” is being displayed, press (+) button to increase or (-) button to decrease the bass level.
• TREBLE - While “TREB” is being displayed, press (+) button to increase or (-) button to decrease the treble level.
• BALANCE - While “BAL” is being displayed, press (+) or (-) button to level balance of speaker right and left.
• FADER - While “FAD” is being displayed, press (+) or (-) button to level fader of speaker front and rear.
18/19. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL
On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1
second can performs fast tuning function or auto tuning function.
On CD mode, press this button will locate the beginning of the track being played or will locate the beginning
of the next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a specific
position of a CD track.
20. STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each
preset button can store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls
the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing
18FM / 12MW.
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station
frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the
button once.
On CD Mode
• Preset 1 - press this button to pause the disc played.
• Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc.
• Preset 3 - press this button to repeat the current track of the disc.
• Preset 4 - press this button to play disc at random order - Disc shuffle play.
Page. 3
P / N : 570-991612-06
WIRE CONNECTION
RESET FUNCTION
The RESET button is located at the back of the
panel. It is recessed in order to prevent accidental
engagement, and can be activated with the tip of a
ball-point pen or any similar pointed object. This
reset circuitry is provided in order to protect the
unit's microprocessor, and should only be activated
under the following conditions :
a) Initial installation after all wiring is completed.
b) Abnormal operation is encountered such as
numerical indication on display is erratic.
c) Whenever the reset button is activated, all preset
memory content will be erased and must be
reprogrammed.
CAUTION : Do not connect the speaker wires to
chassis or car body. Each speaker wire cannot be
soldered together with other wires. Otherwise, the unit
will be damaged and no sound will come out anymore.
INSTALLATION
REMOTE CONTROL
CAUTION : DO NOT PLACE THE UNIT OVER THE
MAXIMUM INSTALLATION ANGLE OF 30°.
OTHERWISE, THE UNIT MAY NOT WORK
PROPERLY.
WARNING!!
Due to protection of CD Mechanism, two small screws on the top
of the unit must be released before operate the unit. Otherwise, the
CD Mechanism can not be working properly.
UNIT REMOVAL
1. Remove Front Control Panel.
2. Slightly insert the key into the slot and
gently to release.
3. Separate the sleeve from the unit. Keep
release key in a safe place as you may
need for future removal of unit.
P / N : 570-991612-06
Page. 4
P / N : 570-991612-06
|