G4050
User Guide
Cost Settings
Call Cost’s Limit
Set Tariff
54 Security Settings
54 PIN Code Request
55 Call Barring Service
55 Fixed Dial Number (FDN)
Change Codes
65
65
65
66
66
Fun & Tools
Game
79 Java
79 Applications
Download
79 View Information
79 Memory Status
80 Java Version
80
92
92
93
94
94
94
Auto Display
My Folder
Picture
Animation
Sound
GPRS Information
WAP Information
External Device
Total Data
55
55 Network Settings
55 Automatic
55 Manual
67
67
67
67
Camera
95
95
96
97
Unit Converter
Calculator
World Time
Voice Recorder
Infrared
81 Capture Mode
82 My Album
82 Memory Status
83
84 Q & A
Accessories
85 Safety Guidelines
87 Glossary
87 Index
Preferred
Profiles
Settings
Alarm Clock
Date & Time Settings
Date & Time
Auto Update
56
58 GPRS Settings
58 Attach
59 External Device
59
68
68
69
98
101
103
117
120
Internet
Home
Bookmarks
Push Messages
Inbox
59 Reset Settings
69
Phone Settings
Display Settings
Languages
60 Organizer
60 Schedule
60 Memo
Phonebook
61 Search
61 Add New
62 Speed Dials
62 Voice List
62 Caller Groups
63 Copy All
63 Delete All
64 Settings
64 Information
64
70
70
72
73
73
74
75
75
76
76
77
77
78
89
89
89
Receive
Call Settings
Call Divert
Profiles
Go to URL
Cache Settings
Clear Cache
Cache Check
90
90
90
91
91
Answer Mode
Send My Number
Call Waiting
Minute Minder
Voice Dial
Auto Redial
Select Line
Closed User Group
6
Security Certificates
Reset Profiles
WAP Information
91
91
91
7
Unpacking
For Your Safety
Check to make sure that you have all the parts shown below.
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information carefully for
optimal performance and to prevent any damage to, or misuse of,
the phone. Any changes or modifications not expressly approved in
this user guide could void your warranty for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the bathroom,
swimming pool, etc.
Always store your phone away from heat. Never store
your phone in settings that may expose it to temperatures less than
32°F or greater than 104°F, such as outside during a snowstorm or
in your car on a hot day. Exposure to excessive cold or heat will
result in malfunction, damage and/or catastrophic failure.
Be careful when using your phone near other
electronic devices. RF emissions from your mobile phone may
affect nearby inadequately shielded electronic equipment. You
should consult with manufacturers of any personal medical devices
such as pacemakers and hearing aides to determine if they are
susceptible to interference from your mobile phone. Turn off your
phone in a medical facility or at a gas station.
Handset
Standard
Battery
Never place your phone in a microwave oven as this will cause the
battery to explode.
IMPORTANT! Please read the TIA SAFETY INFORMATION on
page 103 before using your phone.
Travel Adapter
User Guide
8
9
For Your Safety
For Your Safety
]
]
Do not hold or let the antenna come in contact with your body
during a call.
Safety Information
Please read and observe the following information for the safe and
proper use of your phone and to prevent any unanticipated
damage. Also, keep the user’s manual in an accessible place at all
times after reading it.
Talking on your phone for a long period of time may reduce the
call quality due to heat generated during the use of the phone.
]
]
Do not allow excessive vibration or impact to the phone.
]
Unplug the power cord and charger during a lightning storm to
When you do not plan to use the phone for a long period of time,
store it in a safe area with the power cord unplugged.
avoid electric shock or fire.
]
Do not use your phone in high explosive areas as the phone may
FCC RF Exposure Information
generate sparks.
WARNING! Read this information before operating the phone.
]
Do not put your phone in a place subject to excessive dust, and
keep the minimum required distance between the power cord
and heat sources.
In August 1996, the Federal Communications (FCC) of the United
States, with its action in Report and Order FCC 96-326, adopted an
updated safety standard for human exposure to radio frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies.
]
Do not damage the power cord by bending, twisting, pulling, or
subjecting it to heat. Do not use the plug if it is loose as it may
cause fire or electric shock.
]
Hold the power cord plug firmly to plug and unplug the power
cord. Ensure the plug is firmly connected. If it is not firmly
connected, it may cause excessive heat or fire.
The design of this phone complies with the FCC guidelines and
these international standards.
]
Do not place a heavy item on the power cord. Do not allow the
power cord to be crimped as it may cause fire or electric shock.
]
Be careful not to let the battery contact metal conductors such
as a necklace or coins. When shorted, it may cause an
explosion.
]
Do not disassemble or impact the battery as it may cause
electric shock, short-circuit, and fire. Store the battery in a place
out of reach of children.
]
Using a damaged battery or placing a battery in your mouth may
cause serious injury.
]
Do not place items containing magnetic components such as a
credit card, phone card, bank book or a subway ticket, near
your phone. The magnetic strip can be damaged by the phone.
10
11
For Your Safety
For Your Safety
CAUTION
FCC Part 15 Class B Compliance
Use only the supplied and approved antenna. Use of unauthorized
antennas or modifications could impair call quality, damage the
phone, void your warranty and/or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with skin, a minor burn may result.
Contact your local dealer for a replacement antenna.
This device and its accessories comply with part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device
and its accessories may not cause harmful interference, and (2)
this device and its accessories must accept any interference
received, including interference that may cause undesired
operation.
Cautions for Battery
Body-worn Operation
]
Do not disassemble.
This device was tested for typical body-worn operations with the
back of the phone kept 10mm between the use's body and the
back of the phone. To comply with FCC RF exposure requirements,
a minimum separation distance of 10mm must be maintained
between the user’s body and the back of the phone. Third-party
belt-clips, holsters, and similar accessories containing metallic
components should not be used. Body-worn accessories that
cannot maintain 3/4 inch (2 cm) separation distance between the
user’s body and the back of the phone, and have not been tested
for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
]
Do not short-circuit.
]
Do not expose to high temperature: 60°C (140°F).
]
Do not incinerate.
Battery Disposal
]
Please dispose of your battery properly or bring to your local
wireless carrier for recycling.
]
Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
Vehicle Mounted External Antenna (optional,
if available)
]
Using the wrong battery charger could damage your phone and
void your warranty.
A minimum separation distance of 8 inches (20 cm) must be
maintained between the user/bystander and the vehicle mounted
external antenna to satisfy FCC RF exposure requirements.
]
The adapter or battery charger is intended for indoor use only.
Do not expose the adapter or battery charger to direct sunlight or
use it in places with high humidity, such as the bathroom.
For more information about RF exposure, visit the FCC website at
12
13
Your Phone
Your Phone
Your Phone’s Features
Phone Components
1. Earpiece
2,11. Left soft key / Right soft key: Each of these keys
perform the functions indicated by the text on the display
immediately above them.
1. Earpiece
3. Side keys: These keys are used to control the volume of key
7. Active flip
tone in standby mode and speaker volume during a call.
4. Send key: You can dial a phone number and answer incoming
calls. Press this key in standby mode to quickly access the most
recent incoming, outgoing and missed calls.
8. Display screen
9. Navigation key
5. Alphanumeric keys: These keys are used to dial a number in
standby mode and to enter number or characters in edit mode.
6. Microphone: Can be muted during a call for privacy.
7. Active flip: Open the flip to answer an incoming call and close
to end the call.
10. Confirmation
key
2. Left soft key
8. Display screen: Displays phone status icons, menu items,
Web information, pictures and more in full color.
11. Right soft key
16. Message key
9. Navigation key: Use for quick access to phone functions.
10. Confirmation key: Long press will launch the WAP browser.
Allows you to select and confirm menu options.
12. Voice memo key
13. End / Power key
3. Side keys
4. Send key
12. Voice memo key: Press and hold this key to use the voice
memo feature.
14. Clear key
13. End/Power key: Allows you to power the phone on or off,
15. Infrared port
end calls, or return to Standby Mode.
5. Alpha numeric
keys
14. Clear key: Allows you to delete the characters entered or
return you to the previous screen.
15. Infrared port: Indicates that you have activated the infrared
features to communicate with an IrDA-compliant device and to
send or receive data.
6. Microphone
16. Message key: Use to retrieve or send voice and text
messages.
14
15
Your Phone
Your Phone
Sub LCD
Display Information
Organic Electro
Luminescent Display
The table below describes various display indicators or icons that
appear on the phone’s display screen.
You can view the icon for text and voicemail message status
indicator without opening the flip. In addition, you can check the
name and number of the incoming calls.
On-Screen Icons
Icon
Description
Indicates the strength of the network signal.
Indicates a call is in progress.
Note! If the name or the number of the entry is not saved in the
phonebook, then ‘New call’ will be displayed when
receiving a call.
Indicates that you are roaming off the network.
Indicates that GPRS service is available.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates the receipt of a text message.
Indicates the receipt of a voice message.
Indicates that the vibration ringer has been set.
Indicates the receipt of an e-mail message.
Indicates the Loud menu in Profiles.
Antenna
Handstrap Hole
Battery Lock
SIM Card
Socket
Indicates the Quiet menu in Profiles.
Battery
Terminals
Indicates the Headset menu in Profiles.
Indicates the Car menu in Profiles.
Battery
Indicates the General menu in Profiles.
Indicates that you can use the push message service.
Indicates the Schedule function.
Handsfree
Portable Jack
Cable Connector/
Battery Charging Connector
16
17
Getting Started
Getting Started
Removing the Battery
Using the Battery, Charger and SIM
Card
Turn the power off. (If power is left on, there is a chance you could
lose the stored telephone numbers and messages.)
Installing and Removing the Battery
Pressing the release latch upwards will detach the battery from the
phone.
]
To install, insert the battery into the opening on the back of the
phone and gently press down until the latch snaps into place.
]
To remove, first make sure the power is off. Press the battery
release latch up and remove the battery from the phone at a 45-
degree angle.
Installing the Battery
To install the battery, insert the bottom of the battery into the
opening on the back of the phone. Then push the battery down
until the latch clicks.
Charging the Battery
Use of unauthorized accessories could damage your phone and
invalidate your warranty.
To use the travel adapter provided with your phone:
1. With the battery in position on the phone, connect the lead from
the travel adapter to the bottom of the phone. Check that the
arrow on the lead connector is facing towards the front of the
phone.
2. Connect the adapter to a standard AC wall outlet. Only use the
travel adapter that comes included with the package.
Warning Do not force the connector as this may damage the phone
and/or the travel adapter.
18
19
Getting Started
Getting Started
Disconnecting the Charger
Installing the SIM Card
When charging is finished, disconnect the adapter from the power
outlet and from the phone by pressing on the gray tabs on both
sides of the connector while pulling the connector out.
When you subscribe to a cellular network, you are provided with a
plug-in SIM card loaded with your subscription details (PIN,
optional services available and so on).
Locate the SIM card socket in the back of the phone. Follow the
steps below to install the SIM card.
1. Remove the battery if attached.
2. Slide the SIM card into the SIM card holder so that the holder
locks the card in position.
Notice
SIM
]
The battery delivered with your phone has to be fully charged
before using it.
]
Do not remove the battery or the SIM card while charging.
]
If your phone is powered on while charging, you’ll see the bars in
the battery indicator icon cycle.
Notice When you need to remove the SIM card, slide it towards
the top of the phone and take it out of the holder.
When the battery is fully charged, the bars in the battery indicator
icon will flash on and off
]
If your phone is powered off, the display will show the charging
status. ‘Charging’ or ‘Full’ will be displayed.
SIM
Sub LCD
Sub LCD
Notice
]
Before installing always make sure that the phone is switched off
If the battery fails to charge completely:
and remove the battery.
]
]
After turning the phone on and off, please attempt to recharge the
The metal contact of the SIM card can be easily damaged by
battery.
scratches. Pay special attention to the SIM card while handling and
installing. Follow the instructions supplied with the SIM card.
]
After detaching and reattaching the battery, please attempt to
recharge the battery.
20
21
Getting Started
Getting Started
Turning Your Phone On and Off
Barring Password
The barring password is required when you use the Call Barring
function. The password is obtained from the service provider when
you subscribe to this function. See page 65 for further details.
Turning Your Phone On
1. Install a charged battery pack or connect the phone to an
external power source such as the vehicle power adapter or car
kit.
2. Press
for more than five seconds.
3. Depending on the status of the PIN Code Request setting you
may or may not need to enter it.
Notice Like any other radio device, avoid any unnecessary contact
with the antenna while your phone is on.
Turning Your Phone Off
1. Press
for a few seconds.
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be
changed by using the Change Codes feature [Menu 4.5.4].
Security code (4 to 8 digits)
The security code protects the unauthorized use of your phone.
The default security code is set to ‘0000’ and the security code is
required to delete all phone entries and to activate the Restore
Factory Settings menu. The security code default setting can be
modified from the Security Settings menu.
22
23
General Functions
General Functions
Making a Call From the Phonebook
Making and Answering Calls
You can store names and phone numbers dialed frequently in the
SIM card as well as the phone memory known as the Phonebook.
Making a Call
1. Make sure your phone is powered on.
You can dial a number by simply looking up a name in the
phonebook. For more details on the Phonebook feature, please refer
to page 73.
2. Enter a phone number including the area code. To edit a
number on the display screen, press the right/left navigation
keys to move the cursor to desired position or simply press
to erase one digit at a time.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the side
keys of the phone.
In idle mode with the flip cover open, you can adjust the key volume
using the side keys.
]
Press and hold
to erase the entire number.
3. Press
to call the number.
4. When finished, press
.
Answering a Call
Making a Call by Send Key
When you receive a call, the phone rings and the flashing phone
icon appears on the screen. If the caller can be identified, the
caller’s phone number(or name if stored in your phonebook) is
displayed.
1. Press
, and the most recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press
.
1. Open the flip and press the
an incoming call. If the Any key menu option(Menu 4.4.2) has
been set to , any key press will answer a call except for the
key or the right soft key.
key or the left soft key to answer
Making International Calls
1. Press and hold the
key for the international prefix. The ‘+’
character can be replaced with the international access code.
Notice
]
2. Enter the country code, area code, and the phone number.
To reject an incoming call, press and hold the side keys on the left
side of the phone without opening the flip.
3. Press
.
]
If the Flip open menu option(Menu 4.4.2) is set to
, you do not
need to press any key. You can answer the call simply by opening
the flip.
Ending a Call
When you have finished a call, press the
key.
2. End the call by closing the phone or pressing the
key.
Notice You can answer a call while using the phonebook or other
menu features.
24
25
General Functions
General Functions
Symbolic Mode
Manner Mode (Quick)
This mode allows you to enter special characters.
When the flip is closed, Manner Mode can be activated by
pressing and holding down side keys.
Notice You can select a different T9 language from the menu option.
The default setting on the phone is T9 enabled mode.
Signal Strength
To turn it off, select the T9 Off option from the menu.
Since the antenna is fixed, it does not extend. If you are inside a
building, being near a window may give you better reception. You
Changing the Text Input Mode
1. When you are in a field that allows characters to be entered, you
will notice the text input mode indicator in the upper right corner
of the display.
can see the strength of your signal by the signal indicator (
your phone’s display screen.
) on
Write message
Write message
Write message
Entering Text
1
914
Enter
Enter
Subject
Subject
You can enter alphanumeric characters by using the phone’s
keypad. For example, storing names in the phonebook, writing a
message, creating a personal greeting or scheduling events in the
calendar all require entering text.
OK
Hi
En T9
En T9
en T9
OK
Back
OK
Back
Options Attach
Following text input methods are available in the phone.
2. If you want to change modes, press the
key. The available
T9 Mode
modes are displayed.
This mode allows you to enter words with only one keystroke per
letter. Each key on the keypad has more than one letter. The T9
mode automatically compares your keystrokes with an internal
linguistic dictionary to determine the correct word, thus requiring
far fewer keystrokes than the traditional ABC mode.
Using the T9 Mode
The T9 predictive text input mode allows you to enter words easily
with a minimum number of key presses. As you press each key, the
phone begins to display the characters that it thinks you are typing
based on a built-in dictionary. As new letters are added, the word
changes to reflect the most likely candidate from the dictionary.
ABC Mode
This mode allows you to enter letters by pressing the key labeled
with the required letter once, twice, three or four times until the
letter is displayed.
1. When you are in the T9 predictive text input mode, start entering
a word by pressing keys
to
. Press one key per letter.
]
The word changes as letters are typed - ignore what's on the
screen until the word is typed completely.
123 Mode(Numbers Mode)
Type numbers using one keystroke per number. To change to 123
]
If the word is still incorrect after typing completely, press the
down navigation key once or more to cycle through the other
word options.
mode in a text entry field, press
displayed.
key until 123 mode is
26
27
General Functions
General Functions
Notice Refer to the table below for more information on the
Example: Press
Press
to type Good
[down navigation key] to type
characters available using the keys.
Home
Characters in the Order Display
Key
]
If the desired word is missing from the word choices list, add it
by using the ABC mode.
Upper Case
Lower Case
¡
¡
¿
¿
1
2
3
4
5
6
7
8
9
0
. , -
?
!
1
. , -
?
!
1
@
@
2. Enter the whole word before editing or deleting any keystrokes.
A B C Á Ã Ç 2
D E F É 3
a b c á ã ç 2
d e f é 3
3. Complete each word with a space by pressing the
key.
To delete letters, press
entire words.
. Press and hold down
to erase
G H I Í 4
g h i í 4
Notice To exit the text input mode without saving your input, press
.
The phone returns to the previous menu level.
J K L 5
j k l 5
Using the ABC Mode
M N O Ó Ñ 6
P Q R S 7
T U V Ú Ü 8
W X Y Z 9
Space Key
m n o ó ñ 6
p q r s 7
Use the
to
keys to enter your text.
1. Press the key labeled with the required letter:
t u v ú ü 8
w x y z 9
Space Key
]
Once for the first letter
Twice for the second letter
And so on
]
]
2. To insert a space, press the
key once. To delete letters,
press the
key. Press and hold down the key to clear
the display.
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text message
(a telephone number, for example).
Press the keys corresponding to the required digits before
manually switching back to the appropriate text entry mode.
Using the Symbol Mode
The Symbol Mode enables you to enter various symbols or special
characters.
To enter a symbol, press the
key. Use the navigation keys to
select the desired symbol and press the [OK] key.
28
29
General Functions
General Functions
In-Call Menu
Phonebook
You can store phone numbers and their corresponding names in
the memory of your SIM card.
Your phone provides a number of control functions that you can
use during a call. To access these functions during a call, press
the left soft key [Options].
In addition, you can store up to 255 numbers and names in the
phone memory.
During a Call
The SIM card and phone memory, although physically separate,
are utilized like a single entity known as the Phonebook. (See page
73 for details)
The menu displayed on the handset screen during a call is different
than the default main menu displayed when in idle screen, and the
options are described below.
Making a Second Call
You can get a number you wish to dial from the phonebook to
make a second call. Press the right soft key then select Search. To
save the dialed number into the phonebook during a call, press the
right soft key then select Add New.
Swapping Between Two Calls
To switch between two calls, press the left soft key, and then select
Swap.
Answering an Incoming Call
To answer an incoming call when the handset is ringing, simply
press the
key. The handset is also able to warn you of an
incoming call while you are already on a call. A tone sounds in the
earpiece, and the display will show that a second call is waiting.
This feature, known as Call Waiting, is only available if your
network supports it. For details of how to activate and deactivate it
see Call Waiting [Menu 4.4.4].
If Call Waiting is on, you can put the first call on hold and answer
the second, by pressing
or by pressing the left soft key, and
then selecting the Hold & Answer. You can end the current call and
answer the waiting call by pressing the left soft key and then
selecting End & Answer.
30
31
General Functions
General Functions
Rejecting an Incoming Call
Making a Second Call
You can reject an incoming call without answering by simply
pressing the key.
You can make a second call while currently on a call. Enter the
second number and press the . When the second call is
connected, the first call is automatically placed on hold. You can
swap between calls, by selecting the left soft key and then
selecting Swap.
During a call, you can reject an incoming call by pressing the left
soft key, which is the [Menu] key and selecting the
Conference/Reject or by pressing the
key.
Setting Up a Conference Call
Muting the Microphone
To set up a conference call, place one call on hold and while the
active call is on, press the left soft key and then select the
Conference/Join all.
You can mute the microphone during a call by pressing the
[Menu] key then selecting Mute on. The handset can be
unmuted by pressing the Mute off menu. When the handset is
muted, the caller cannot hear you, but you can still hear them.
Putting a Conference Call on Hold
To put a conference call on hold, press the left soft key, and then
select the Conference/Hold all.
Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, press the left soft key, and
then select DTMF on. DTMF tones can be turned off the same
way. DTMF tones allow your phone to make use of an automated
switchboard.
Activate the Conference Call on Hold
To activate a conference call on hold, press the left soft key, and
then select the Conference/Join all.
Multiparty or Conference Calls
Adding Calls to the Conference Call
The multiparty or conference service provides you with the ability to
have a simultaneous conversation with more than one caller, if your
network service provider supports this feature. A multiparty call can
only be set up when you have one active call and one call on hold,
both calls having been answered. Once a multiparty call is set up,
calls may be added, disconnected or separated (that is, removed
from the multiparty call but still connected to you) by the person
who set up the multiparty call. These options are all available from
the In-Call menu. The maximum callers in a multiparty call are five.
Once started, you are in control of the multiparty call, and only you
can add calls to the multiparty call.
To add a call to an existing conference call, press the left soft key,
and then select the Conference/Join all.
Displaying Callers in a Conference Call
To scroll through the numbers of the callers who make up a
conference call on the handset screen, press the up/down
navigation keys.
Private Call in a Conference Call
To have a private call with one caller from a conference call,
display the number of the caller you wish to talk to on the screen,
then press the left soft key. Select the Conference/Private to put all
the other callers on hold.
32
33
General Functions
Menu Tree
The following illustration shows the available menu structure and
indicates the:
Ending a Conference Call
Currently displayed caller from a conference call can be
]
Number assigned to each menu option.
Page where you can find the feature description.
disconnected by pressing the
key. To end a conference call,
]
press the left soft key, and then select the Conference/End
multiparty. Selecting the left soft key then Conference/End all, will
end all the active and on-hold calls.
1. Messages (continued)
1.5 Templates
1.5.1 Text
1. Messages (see page 39)
1.1 Text messages
1.1.1 Write message
1.1.2 Inbox
1.5.2 Multimedia
1.6 Name card
1.7 Check memory
1.7.1 Text
1.1.3 Outbox
1.1.4 Draft
1.1.5 Settings
1.7.2 Multimedia
1.1.6 Delete
2. Call register (see page 52)
2.1 Missed calls
2.2 Received calls
2.3 Dialed calls
2.4 Delete recent calls
2.5 Call durations
2.5.1 Last call
1.2 Multimedia messages
1.2.1 Write
1.2.2 Inbox
1.2.3 Outbox
1.2.4 Draft
1.2.5 Settings
2.5.2 Received calls
2.5.3 Dialed calls
*
1.3 Voice messages
1.3.1 Listen to voice messages
1.3.2 Voice mailbox number
2.5.4 All calls
*
2.6 Call costs
2.6.1 Last call’s cost
2.6.2 All calls’ cost
*
1.4 Info service
1.4.1 Receive
1.4.2 Inbox
*
2.7 Cost settings
2.7.1 Call cost’s limit
2.7.2 Set tariff
1.4.3 Topics
1.4.4 Alert
2.7.3 Auto display
1.4.5 Auto display
1.4.6 Languages
2.8 GPRS information
2.8.1 WAP information
2.8.2 External device
2.8.3 Total data
:
Shown only if supported by CPHS(Common PCS Handset
Specification)
*
34
35
Menu Tree
Menu Tree
3. Profiles (see page 56)
3.1 Vibrate only
3.1.1 Activate
4. Settings (continued)
5. Organizer (see page 70)
5.1 Schedule
5.2 Memo
7. Internet (see page 85)
4.4 Call settings
7.1 Home
*
4.4.1 Call divert
7.2 Bookmarks
Inbox
3.2 Silent
4.4.2 Answer mode
5.3 Phonebook
5.3.1 Search
*
3.2.1 Activate
4.4.3 Send my number
Home
*
3.2.2 Personalize
3.2.3 Rename
3.3 General
3.3.1 Activate
4.4.4 Call waiting
4.4.5 Minute minder
4.4.6 Voice dial
5.3.2 Add new
Tone Download
Graphic Downld
E-mail server
5.3.3 Speed dials
5.3.4 Voice list
4.4.7 Auto redial
5.3.5 Caller groups
5.3.6 Copy all
Delete all
*
3.3.2 Personalize
3.3.3 Rename
3.4 Loud
4.4.8 Select line
7.3 Push messages
7.3.1 Inbox
*
4.4.9 Closed user group
4.5 Security settings
4.5.1 PIN code request
5.3.7 Delete all
5.3.8 Settings
7.3.2 Receive
3.4.1 Activate
5.3.9 Information
7.4 Profiles
*
3.4.2 Personalize
3.4.3 Rename
3.5 Headset
3.5.1 Personalize
3.6 Car
4.5.2 Call barring service
7.5 Go to URL
7.6 Cache settings
7.6.1 Clear cache
7.6.2 Cache check
7.7 Security certificates
7.8 Reset profiles
7.9 WAP information
4.5.3 Fixed dial number
4.5.4 Change codes
6. Fun & Tools (see page 79)
6.1 Game
*
4.6 Network settings
4.6.1 Automatic
6.2 My folder
6.2.1 Picture
3.6.1 Personalize
4.6.2 Manual
6.2.2 Animation
4.6.3 Preferred
6.2.3 Sound
4 Settings (see page 58)
4.1 Alarm clock
4.7 GPRS settings
4.7.1 Attach
6.3 Unit converter
6.4 Calculator
6.5 World time
6.6 Voice recorder
6.7 Infrared
8. Java (see page 92)
4.2 Date & Time settings
4.2.1 Date & Time
4.7.2 External device
4.8 Reset settings
8.1 Applications
8.2 Download
4.2.2 Auto update
8.3 View information
8.3.1 Memory status
8.3.2 Java version
4.3 Phone settings
4.3.1 Display settings
*
4.3.2 Languages
9. Camera (see page 95)
9.1 Capture mode
9.2 My album
9.3 Memory status
:
Shown only if supported by CPHS(Common PCS Handset Specification)
*
36
37
Selecting Functions and Options
Messages
Your phone offers a set of functions that allow you to customize the
phone. These functions are arranged in menus and sub-menus,
Text Messages
Menu 1.1
Your phone receives voice mail notification messages and Short
Message Service (SMS) messages.
Voice mail and SMS are network services. Please contact your
service provider for more information.
accessed via the two soft keys marked
and . Each menu and
sub-menu allows you to view and alter the settings of a particular
function.
The roles of the soft keys vary according to the current context; the
label on the bottom line of the display just above each key
indicates its current role.
When the
When the
icon appears, you have received a new voice mail.
icon appears, you have received a new text
message. If the message memory is full, an error message is
displayed, the icon flashes and you cannot receive any new
messages. Use the Delete option in the Inbox (Menu 1.1.2) to
delete obsolete messages. Once there is space in the memory any
undelivered SMS messages will be received (provided sufficient
space is available).
(Menu 1.1.1)
Write Message
You can write and edit text messages of up to 918 characters.
1. Type in a message using key presses. For details on how to
enter text, refer to page 26 (Entering Text).
2. After completing the message select the required option by
pressing the left soft key [Options].
The following options are available.
]
Send to number: Enter the phone number or select the
number from the phone book.
]
Send to email: Enter the email or select the email from the
phone book.
*
]
Save to draft: Save the message so that it can be sent later.
Press the left soft key
to access the
available menu.
Press the right soft
key to access the
available names.
]
Edit Subject: Yon can edit the subject of a message.
]
T9 languages: Choose between English or Spanish T9
language. For details on how to enter text, refer to page 27
(Using the T9 Mode).
]
Clear text: Deletes the written message.
]
Exit: Exit the text editor.
:
38
Shown only if supported by SIM card
39
*
Messages
Messages
The following options are available. (Press the right soft key [Attach])
The following options are available.
]
• Symbol: Attach special characters.
Reply: Replies to the received message.
]
• Picture: Send and receive text messages that contain pictures,
known as ‘picture messages’. Several preset pictures are
available in the phone and they can be replaced with new ones
received from other sources.
Forward: Forwards a received message to other recipients.
After recipients are entered, the message can be forwarded.
]
]
Return call: Call back the sender.
Extract: Extract picture, sound, text webpage and email
address from the message. They will be saved in My Folder,
phonebook or bookmarks.
• Animation: Attaching an animation in a message can be
done through EMS(Enhanced Messaging Service).
• Sound: Attach sounds that are available for short message.
]
Delete: Deletes the selected message from the Inbox.
• Text template: Use the text templates already set in the
phone.
(Menu 1.1.3)
Outbox
• Phone number: Attach a phone number.
View lists and contents of sent messages in this menu and also
verify if transmission was successful.
• Name card: Attach your name card.
The following options are available.
(Menu 1.1.2)
Inbox
]
Forward: Forwards the current message to other recipients.
Received text messages, page messages, and email lists may be
searched and the contents may be viewed.
]
Delete: Deletes the selected message from the Outbox.
Received messages are displayed from newest to oldest.
Icon directive
1. Press the left soft key [Menu].
[
[
] Sent SIM email
] Sent email
[
[
] Sent SIM message
] Sent message
2. Press
.
3. Select
.
(Menu 1.1.4)
Draft
Icon directive
[
[
[
[
[
] Read SIM email
] Unread SIM email
] Read email
[
[
[
[
[
] Unread SIM message
] Read message
This menu option shows the preset message list. Scroll through the
list using the up/down navigation keys.
] Unread message
The following options are available.
] Unread email
] Read delivery report
] Unread delivery report
]
Send: Sends the current message to other recipients.
] Read SIM message
]
Delete: Deletes the selected preset message.
40
41
Messages
Messages
Settings
(Menu 1.1.5)
Menu 1.2
Multimedia Messages
This menu allows you to set up default SMS information.
A multimedia message can contain text, images, and/or sound
clips. This feature can be used only if it is supported by your
network operator or service provider. Only devices that offer
compatible multimedia message or e-mail features can receive and
multimedia messages. Attach to add Symbol, Picture, Sound,
Recorded Voice, Text Template.
]
Message types: Allows you to set the default message type
*
*
*
*
(Text, Voice, Fax, Paging, X.400, E-mail, ERMES). The network
can convert the messages into the selected format. The type of
message you desire can be set to Text Type.
]
Valid period: Allows you to set the length of time for which
your text messages will be stored at the SMS center while
attempts are made to deliver them to the recipient. Possible
values are Maximum, 30minutes, 1hour, 6hours, 1day and
1week which can be authorized by your service provider.
(Menu 1.2.1)
Write
The following options are available.
• Send: Support mutiple number and email addresses.
• Preview: To see the multimedia message you wrote.
]
]
]
Delivery reports: Allows you to activate or deactivate the
report function. When this function is activated, the network
informs you whether or not your message has been delivered.
*
*
• Save: Allows you to save multimedia messages in draft or as
templates.
Reply with same service: Allows the recipient of your SMS
message to send you a reply via your message center, if the
service is provided by the network.
• Delete: Allows you to delete the image or sound.
• Settings: Allows you to set timer for slide and text. Or, allows
you to make the message contents aligned right, left, top and
bottom.
Message center number: Allows you to store or change the
number of your email gateway required when sending text
messages. You must obtain this number from your service
provider.
• Add Slide: Allows you to add a slide before or after current
slide.
]
Email gateway: Allows you to store or change the number of
your email gateway required when sending text messages.
*
*
• Remove Slide: Allows you to move to previous or next slide.
• Add Image: Allows you to add a image before or after current
image.
]
]
Subject: If you set it to on, allows you to enter the subject.
Bearer setting: You can select GPRS or GSM. Contact your
network operator or service provider for information related to
setting a selected bearer, pricing and connection speed.
GSM Only/GPRS Only
• Add Sound: Allows you to add a sound before or after current
sound.
(Menu 1.1.6)
Delete
Allows you to delete read and all messages.
Read messages/All messages
:
42
Shown only if supported by SIM card
43
*
Messages
Messages
(Menu 1.2.2)
(Menu 1.2.3)
Inbox
Outbox
You will be alerted when you have received messages. They will be
stored in the Inbox. In the Inbox, you can identify each message by
icons. For detail, see the icon directive below.
Allows you to see sent messages here. For sent message, you can
see the delivery status.
Icon directive
Icon directive
[
] Sent
[
[
]
]
Read multimedia message
Unread multimedia message
[
[
]
]
Read notified multimedia message
Unread notified multimedia message
• Timer stop: Timer stop menu is displayed when you receive
the message including various pictures. Usually, the pictures
slide automatically. However, if you select this menu, you can see
the next picture by pressing the left soft key manually.
If the phone has ‘no space for message’, you can make space in
each repository by deleting messages, media and applications.
• Previous slide: View the previous page.
• Timer stop: Timer stop menu is displayed when you receive
the message including various pictures. Usually, the pictures
slide automatically. However, if you select this menu, you can see
the next picture by pressing the left soft key manually.
• Restart: Allows you to replay current messages.
• Save Message: Allows you to save multimedia message in
draft or as template.
• Previous slide: View the previous page.
• Save Items: Save the item such as image or sound as an
• Restart: Allows you to replay multimedia messages.
attachment in a message.
• Save Message: Allows you to save a multimedia message in
draft or as template.
• Details: Allows you to view information about outbox messages;
Subject (only for multimedia message), Message date & time,
Message type, Message size.
• Save Items: Allows you to extract picture and sound. They will
be saved in My Folder or phonebook.
• Reply: Allows you to reply to the current message.
• Reply all: Allows you to reply to the all messages.
• Delete Message: Allows you to delete the current message.
• Details: Allows you, to view information about received
messages; Sender’s address, Subject (only for multimedia
message), Message date & time, Message type, Message size.
• Forward: Allows you to forward the current message to other
recipients.
• Reply: Allows you to reply to the sender.
• Reply all: Allows you to reply to the senders.
• Delete Message: Allows you to delete the current message.
• Forward: Allows you to forward the selected message to other
recipients.
44
45
Messages
Messages
(Menu 1.2.5)
(Menu 1.2.4)
Draft
Settings
Using this menu, you can preset up to five multimedia messages
that you use most frequently. This menu shows the preset
multimedia message list.
Via this menu, you can set up default multimedia message
information.
The following options are available:
]
The following options are available.
Message title: Allows you to enter the message title.
]
• Send: Support mutiple number and email addresses.
• Preview: To see the multimedia message you wrote.
Slide duration: Display the duration of each page when
writing the message (MMS supports multi-message).
]
Alignment: Set the position of a message and text message.
• Save: Allows you to save multimedia messages in draft or as
templates.
• Image bottom
• Image top
• Delete: Allows you to delete the image or sound.
• Settings: Allows you to set timer for slide or text. Or, allows you
• Image left
to make the message contents aligned right, left, top and bottom.
• Image right
• Add Slide: Allows you to add a slide before or after current
slide.
]
Valid period: Set the duration to keep the message in server.
]
Auto download
• Remove Slide: Allows you to move to previous or next slide.
• On: Download the message automatically on receiving it.
• Add Image: Allows you to add a image before or after current
image.
• Confirm: Download after confirmation of the receipt of a
message.
• Add Sound: Allows you to add a sound before or after current
sound.
• Off: Defer receiving a message.
]
Message center url: Enter the address of MMS server to use
MMS service.
]
Profiles: For further details, see page 90.
46
47
Messages
Messages
Menu 1.3
Menu 1.4
Voice Messages
Info Service
*
*
This menu provides you with a quick way of accessing your voice
mailbox (if provided by your network).
Before using this feature, you must enter the voice server number
obtained from your service provider.
Info service messages are text messages sent by the network to
GSM phone users. They provide general information such as
weather reports, traffic news, taxis, pharmacies, and stock prices.
Each type of information is associated with a number, which can be
obtained from the service provider. When you receive an info
service message, a popup message will indicate a new message
receipt or the info service message will be displayed directly. In
standby mode, the following options are available when viewing the
info service message.
When new voicemail is received, the symbol will be displayed on
the screen. Please check with your network service provider for
details of their service in order to configure the handset
accordingly.
(Menu 1.3.1)
Listen to Voice Messages
(Menu 1.4.1)
Receive
Once this option has been selected, simply press the left soft key
[OK] to listen to voicemail messages. You may also hold down the
key in standby mode to listen to voicemail messages.
Ability to enable or disable the reception of broadcast messages.
(Menu 1.4.2)
Inbox
(Menu 1.3.2)
Voice Mailbox Number
The list of received broadcast messages can be searched and the
contents viewed.
You can input and set the number of voice mail.
(Menu 1.4.3)
Topics
To create new topics, press the left soft key[OK] and then select
the new topics menu by pressing the left soft key [Options].
You can Deactivate, Edit, Delete and Add new topics by
pressing the left soft key [OK].
(Menu 1.4.4)
Alert
Ability to select the alert type for a new message.
(Menu 1.4.5)
Auto Display
This option will automatically display all broadcast messages
received. Scroll through the messages using the up/down
navigation keys.
:
48
Shown only if supported by SIM card
49
*
Messages
Messages
(Menu 1.4.6)
• Send: Support mutiple number and email addresses.
Languages
• Preview: To see the multimedia message you wrote.
This option allows you to select the language preferred. The cell
broadcast message will be displayed in the language selected.
If you use all languages supported by phone, select
‘Automatic’ at the bottom of the list.
• Save: Allows you to save multimedia messages in draft or as
templates.
• Delete: Allows you to delete the image or sound.
• Settings: Allows you to set timer for slide or text. Or, allows you
to make the message contents aligned right, left, top and bottom.
Templates
Menu 1.5
There are 6 predefined messages in the list. You can view and edit
the template messages or create new messages. Two options are
available: Text and Multimedia.
• Add Slide: Allows you to add a slide before or after current
slide.
• Remove Slide: Allows you to move to previous or next slide.
• Add Image: Allows you to add a image before or after current
image.
(Menu 1.5.1)
Text
• Please call me back
• I’m late. I will be there at
• Where are you now?
• I’m on the way.
• Top urgent. Please contact.
• I love you
• Add Sound: Allows you to add a sound before or after current
sound.
Name Card
Menu 1.6
This option allows you to make your own name card. Key in the
Name, Mobile number, Office number,Fax number and E-mail
address.
The following options are available.
]
Edit: Allows you to write a new message or edit the selected
]
Edit: Allows you to write a new message or edit the selected
template message.
name card.
]
Delete: Allows you to delete the selected template message.
]
Delete: Allows you to delete the selected name card.
]
Send via text message: Sends the selected template
]
Send via text message: Sends the selected name card by
message by SMS.
SMS.
]
Send via multimedia message: Sends the selected
]
Send via multimedia message: Sends the selected name
template message by MMS.
card by MMS.
]
Add new: Allows you to create new messages.
Check Memory
You can check how many free locations are in the phonebook, two
options are available : Text and Multimedia
Menu 1.7
(Menu 1.5.2)
Multimedia
For further details, see page 43.
50
51
Call Register
Call Register
You can check the record of missed, received, and dialed calls
only if the network supports the Calling Line Identification (CLI)
within the service area.
Menu 2.3
Dialed Calls
This option lets you view the last 10 outgoing calls(called or
attempted). You can also:
The number and name (if available) are displayed together with the
date and time at which the call was made. You can also view call
times and costs.
• View the number if available and call it or save it in the
phonebook
• Enter new name for the number and save both in the phonebook
• Send a message by this number
Missed Calls
Menu 2.1
This option lets you view the last 10 unanswered calls. You can
also:
• Delete the call from the list
• Delete all incoming calls from the list
• View the number if available and call it, or save it in the
phonebook
Menu 2.4
Delete Recent Calls
Allows you to delete Missed, Received and Dialed call lists.
• Enter a new name for the number and save both in the
phonebook
You can delete all call lists at one time.
• Send a message by this number
• Delete the call from the list
Menu 2.5
Call Durations
Allows you to view the duration of your incoming and outgoing
calls. You can also reset the call times.
• Delete all missed calls from the list
The following timers are available:
Received Calls
Menu 2.2
(Menu 2.5.1)
Last Call
This option lets you view the last 10 incoming calls. You can also:
• View the number if available and call it, or save it in the
phonebook
Length of the last call.
(Menu 2.5.2)
Received Calls
• Enter a new name for the number and save both in the
phonebook
Length of the incoming calls.
• Send a message by this number
• Delete the call from the list
(Menu 2.5.3)
Dialed Calls
Length of the outgoing calls.
• Delete all incoming calls from the list
(Menu 2.5.4)
All Calls
Total length of all calls made and incoming calls since the timer
was last reset.
52
53
Call Register
Call Register
(Menu 2.7.2)
Notice The actual time invoiced for calls by your service provider
Set Tariff
may vary, depending upon network features, rounding-off
for billing, and so forth.
You can set the currency type and the unit price. Contact your
service providers to obtain charging unit prices. To select the
Currency or 1 Unit in this menu, you need the PIN2 code.
Menu 2.6
Call Costs
*
Call costs allows you to check the cost of the last call or all calls.
The call costs are displayed separately for each SIM card. To reset
the cost, you need the PIN2 code.
Note When all units have been used, no calls can be made except
emergency calls. Depending on the SIM card, you need the
PIN2 code to set a call cost limit.
(Menu 2.7.3)
Auto Display
The following options are available:
This network service allows you to see automatically the cost of
your last calls. If you select On in Auto Display menu, you can
see the cost of the last call when the call is released.
(Menu 2.6.1)
Last Call’s Cost
Cost of the last call made.
(Menu 2.6.2)
All Calls’ Cost
Menu 2.8
GPRS Information
Total cost of all calls made since the cost counter was last reset. If
the total cost exceeds the maximum cost set, you will no longer be
able to make any calls, except calls to the emergency services,
until you reset the counter.
You can check the amount of data transferred over the network
through the GPRS information option. In addition, you can also view
how much time you are online.
Notice GPRS General Packet Radio Service
Notice The actual cost invoiced for calls by your service provider
may vary, depending upon network features, rounding-off
for billing, tax, and so forth.
(Menu 2.8.1)
WAP Information
You can check the data volume and the duration through WAP.
Cost Settings
Menu 2.7
*
(Menu 2.8.2)
External Device
(Menu 2.7.1)
Call Cost’s Limit
You can check the data volume and the duration through GPRS by
using an external device such as a serial port.
This network service allows you to limit the cost of your calls by
selected charging units. If you select Read, the number of
remaining unit is shown. If you select Change, you can change
your charge limit.
(Menu 2.8.3)
Total Data
You can check the total amount of data through WAP and an
external device.
:
54
Shown only if supported by SIM card
55
*
Profiles
Profiles
In Profiles, you can adjust and customize the phone tones for
different events, environments, or caller groups.
There are six preset profiles: Vibrate only, Silent, General,
Loud, Headset and Car. Silent, General and Loud profiles can
be customized to meet your needs.
The following options are available:
Off: The phone will not answer automatically.
After 5 sec: The phone will answer automatically after 5
seconds.
After 10 sec: The phone will answer automatically after 10
Changing the profile
seconds.
1. A list of profiles opens.
2. In the Profiles list, scroll to a desired profile and select
‘Activate’.
Customizing profiles (Rename)
1. To modify a profile, scroll to the desired profile in the Profiles list
and select ‘Rename’.
Customizing profiles (Personalize)
2. You can rename a profile and give it any name you want. The
1. To modify a profile, scroll to the desired profile in the Profiles list
Vibrate only, Headset and Car profiles cannot be renamed.
and select ‘Personalize’. A list of profile settings opens.
2. Scroll to the setting you want to change and press the up/down
navigation keys to open the following choices:
• Incoming call alert: To set the alert type for incoming call.
• Ringing tone: To set the ringing tone for voice calls, choose
one from the list. Scroll through the list and listen to the desired
tone prior to making a selection. Press any key to stop the
sound.
• Ringing volume: To set the volume level for the ringing
tones.
• Message alert type: To set the alert type for messages.
• Message alert tone: To set the alert tone for messages.
• Key volume: To set the volume level for keypad tones.
• Automatic answer: This function will be activated only
when your phone is connected to the handsfree kit or headset.
56
57
Settings
Settings
Alarm Clock
Date & Time Settings
Menu 4.1
Menu 4.2
Set the alarm to ring at a specific time. In the Alarm Clock menu,
the following options are available:
(Menu 4.2.1)
Date & Time
On: Set the time(hour and minute) for activating the alarm.
This option allows you to change the current time and date
displayed.
1. Enter the menu.
2. Select [On] by pressing the right/left navigation keys.
3. If you want to set the time for activating the alarm, press the
down navigation key.
The following options are available:
]
Set date: Allows you to enter the day, month and year. You
can change the date format via the Date Format menu option.
4. Enter the required time, press the down navigation key.
5. The following options are available.
Format : Allows you to change the time and date formats.
]
Date format
• Once: The alarm rings only once and is then deactivated.
• Daily: The alarm rings every day at the same time.
YYYY/MM/DD(year/month/day)
DD/MM/YYYY(day/month/year)
MM/DD/YYYY(month/day/year)
• Weekly: The alarm rings every week on the same day and at
the same time.
]
Set time: Allows you to enter the current time. You can choose
the time format via the Time Format menu option.
• Monthly: The alarm rings every month on the same day and
at the same time.
]
Time format
6. Allows you to select the alarm melody by using the right/left
navigation keys.
24 hours/12 hours
7. Press the left soft key [Set].
(Menu 4.2.2)
Auto Update
Off: Cancel the alarm.
Select On to set the phone to automatically update the time and
Notice If this option is set to On, the alarm will ring at the specified
time, even when the phone is switched off.
date according to the current time zone.
To stop the alarm when it rings, open the phone and press
the right soft key[Quit].
58
59
Settings
Settings
Phone Settings
Call Settings
Menu 4.3
Menu 4.4
Many different features of your phone can be customized to suit
your preferences. All of these features are accessed via the
Phone Settings menu.
To change the settings for call diverting:
Call Divert
(Menu 4.4.1)
*
(Menu 4.3.1)
Display Settings
When this network service is activated, you can direct your
incoming calls to another number, for example, to your voice
mailbox number. For details, contact your service provider. Select
one of the divert options, for example, select If busy to divert
voice calls when your number is busy or when you reject incoming
calls.
]
Wallpaper: You can set up the screen displayed on the LCD
screen in the standby mode.
]
Backlight: You can select whether or not the phone uses the
backlight. A marginal increase in the standby/talk time can be
achieved by turning the backlight off.
The following options are available:
• Main LCD
]
All voice calls: Diverts voice calls unconditionally.
- Off means that the backlight is never on.
]
If busy: Diverts voice calls when the phone is in use.
- 10 seconds turns the backlight off 10 seconds after the
last key was pressed.
]
If no reply: Diverts voice calls which you do not answer.
]
If out of reach: Diverts voice calls when the phone is
switched off or out of coverage.
- 30 seconds turns the backlight off 30 seconds after the
last key was pressed.
- 60 seconds turns the backlight off 60 seconds after the
last key was pressed.
]
All data calls: Diverts to a number with a PC connection
unconditionally.
- Always on turns the backlight always on while flip is
]
All fax calls: Diverts to a number with a fax connection
unconditionally.
opened.
• Sub OEL
• Activate: Activates the corresponding service.
Off/10 seconds/30 seconds/60 seconds/Always on
- To voice mail: Forwards to voice mail center. This function
does not include All Data Calls and All Fax Calls menus.
]
Contrast: This option allows you to adjust the contrast of the
LCD screen by pressing the navigation key.
- To other number: Inputs the number for diverting.
• Cancel: Cancels the corresponding service.
• View status: Checks the status of the service.
(Menu 4.3.2)
Languages
*
You can select the display language. When the language option is
set to Automatic, the language is automatically selected according
to the language of the SIM card used. English will be set if the
language on the SIM card is not supported in the phone.
]
Cancel all: Cancels all call divert service.
:
60
Shown only if supported by SIM card
61
*
Settings
Settings
(Menu 4.4.5)
(Menu 4.4.2)
Minute Minder
Answer Mode
This option allows you to specify whether the phone must beep
every minute during an outgoing call to keep you informed of the
length of the call.
Allows you to determine when to answer the phone.
]
Flip open: This option allows you to answer a call simply by
opening the flip.
]
]
(Menu 4.4.6)
Any key: You can answer an incoming call by pressing any
Voice Dial
key, except the
Only send key: You can answer an incoming call by only
pressing the key.
key.
You can make a phone call by saying a voice tag that has been
added to a contact card. Any spoken word(s) can be a voice tag.
Before using voice dialing, note that:
• Voice tags are not language dependent. They are dependent on
the speaker’s voice.
(Menu 4.4.3)
Send My Number
*
*
This network service allows you to set your phone number to be
displayed (On) or hidden (Off) from the person to whom you are
calling. Select Set by network to reset the phone to the setting
that you have agreed upon with your service provider.
• Voice tags are sensitive to background noise. Record them and
make calls in a quiet environment.
• When recording a voice tag or making a call by using a voice tag,
the loudspeaker is in use. Hold the phone at a short distance
away from your mouth and face so that the proximity sensor does
not turn the loudspeaker off.
(Menu 4.4.4)
Call Waiting
The network will notify you of a new incoming call while you have a
call in progress. Select Activate to request the network to
activate call waiting, Cancel to request the network to deactivate
call waiting, or View status, to check if the function is active or
not.
• Very short names are not accepted. Use long names and avoid
similar names for different numbers.
]
Automatic: You can enter the voice dial mode whenever you
open the flip.
]
Manual: You can enter the voice dial mode by holding down
the
key.
Note You must say the name exactly as you said when you
recorded it. This may be difficult in, for example, a noisy
environment or during an emergency, so you should not rely
solely upon voice dialing in all circumstances.
:
62
Shown only if supported by SIM card
63
*
Settings
Settings
(Menu 4.4.7)
Auto Redial
Menu 4.5
Security Settings
Select On, and your phone will make a maximum of three attempts
to connect the call after an unsuccessful call attempt.
Various codes and passwords are used to protect the features of
your phone. They are described in the following sections (see
pages 22~23)
(Menu 4.4.8)
Select Line
*
*
(Menu 4.5.1)
PIN Code Request
This setting is shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (Line 1
or Line 2) you want to use for making calls and sending short
messages. Calls on both lines can be answered irrespective of the
selected line.
When the PIN code request feature is enabled, you must enter your
PIN each time you switch the phone on. Consequently, any person
who does not have your PIN cannot use your phone without your
approval.
Note Before disabling the PIN code request feature, you must enter
your PIN
Note You will not be able to make calls if you select Line 2 and
have not sbscribed to this network service.
The following options are available:
• Enable: You must enter the PIN each time the phone is switched
(Menu 4.4.9)
Closed User Group
on.
Closed user group is a network service that specifies the group of
people whom you can call and who can call you. For more
information contact your network operator or service provider. If a
group index is specified, it is used for all outgoing calls. If no group
index is specified, the network will use the preferential index
(a specific index that is stored in the network).
• Disable: The phone connects directly to the network when you
switch it on.
(Menu 4.5.2)
Call Barring Service
*
Call barring allows you to restrict from making and receiving calls
with your phone. For this function, you need the barring password,
which you can obtain from your service provider.
]
Preset: Setting the selected CUG Index.
]
On: Activating and editing the CUG Index.
The following options are available:
]
Off: Deleting the selected CUG.
]
All outgoing: Calls cannot be made.
]
Outgoing international: International calls cannot be made.
]
Outgoing international except home country: When
abroad, calls can be made only to numbers within the current
country and to your home country, which is where your home
network provider is located.
]
All incoming: Calls cannot be received.
]
Incoming when abroad: Calls cannot be received when you
are using your phone outside your home service area.
:
64
Shown only if supported by SIM card
65
*
Settings
Settings
]
]
Cancel all barrings: All call barring settings are deactivated;
Menu 4.6
Network Settings
*
calls can be made and received normally.
The Network Settings feature enables you to indicate whether the
network used when roaming(outside your home area) is selected
Automatic, Manual, and Preferred.
Change password: You can set and change the call barring
password obtained from your service provider using this option.
You must enter the current password before you can specify a
new one.Once you have entered a new password, you are
asked to confirm it by entering it again.
Note You can select a network other than your home network only if
it has a valid roaming agreement with your home network.
Note To use Call Barring service, you must input the network
password. When calls are barred, calls may be possible to
certain emergency numbers in some networks.
(Menu 4.6.1)
Automatic
Allows you to set the phone to automatically search for and select
one of the cellular networks available in your area.
The phone will be set to Automatic even though the power is off
and on.
(Menu 4.5.3)
Fixed Dial Number (FDN)
Allows you to restrict your outgoing calls to selected phone
numbers, if this function is supported by your SIM card. The PIN2
code is required.
(Menu 4.6.2)
The following options are available:
Manual
]
Enable: You can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Allows you to select the desired network manually from a list of
networks. If the connection to the manually selected network is lost,
the phone will sound an error tone and ask you to select a network
again. The selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card is in your
phone. The phone lets you select another network if the phone fails
to access the selected network. If you switch off the phone, the
phone will be reset to Automatic.
]
Disable: You can call any number.
]
Number list: You can view the number list saved as fixed dial
number.
Note Not all SIM cards have a PIN2. If your SIM card does not, this
menu option is not displayed.
(Menu 4.6.3)
Preferred
Change Codes
(Menu 4.5.4)
You can set a list of preferred networks the handset should attempt
to register with first, before attempting to register to any other
networks. This list is created from the handset’s predefined list of
known networks.
The Change codes feature allows you to change your current
password to a new one. You must enter the current password
before you can specify a new one.
You can change the access codes: Security code, PIN1 code,
PIN2 code
Note PIN: Personal Identification Number.
:
66
Shown only if supported by SIM card
67
*
Settings
Settings
External Device
(Menu 4.7.2)
Menu 4.7
GPRS Settings
When you use Internet via GPRS by using an external device, you
can set the following six profiles: Rename, APN, IP address,
DNS, User ID, and Password.
GPRS (General Packet Radio Service) is a technology that allows
mobile phones to be used for sending and receiving data over the
mobile network. GPRS is a data bearer that enables wireless
access to data network such as the Internet.
The applications which use GPRS are WAP, MMS and SMS
messages.
Menu 4.8
Reset Settings
Before you can use GPRS technology
You can easily reset your phone to its default configuration. To do
so, proceed, as follows.
• You need to subscribe to the GPRS service. For availability and
subscription to GPRS service, contact your network operator or
service provider.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
• You need to save the GPRS settings for the applications used
over GPRS.
Note The password is preset to 0000.
Fees for GPRS and applications:
Both the active GPRS connection and the applications used over
GPRS, for example WAP service, sending and receiving data and
SMS messages, require a fee. For more detailed information on
fees, contact your network operator or service provider.
(Menu 4.7.1)
Attach
If you select Power on and you are in a network that supports
packet data, the phone registers to the GPRS network and sending
short messages will be done via GPRS. Also, starting an active
packet data connection, for example, to send and receive e-mail, is
quicker. If you select When needed, the phone will use a packet
data connection only if you start an application or action that needs
it. The GPRS connection is closed after it is not used by any
application.
Note If there is no GPRS coverage and you have chosen Power
on, the phone will periodically try to establish a packet data
connection.
68
69
Organizer
Organizer
• Scheduler tone
Menu 5.1
Schedule
The phone can sound an alarm tone when the scheduled date for
an event has been reached with this option.
When you enter this menu a calendar will be displayed. Top of the
screen indicates sections for date. Square cursor is used to locate
a particular day. The under bar on the calendar indicates a
schedule or memo on that day. This function helps to remind you of
the schedule and memo. The phone will sound an alarm tone if it
has been set for a specific note.
• View all schedules
Shows the notes that are set for all days. Use the up/down
navigation keys to browse through the note lists. You can use the
menu by press the left soft key [Options].
For changing the day, month, and year.
• Go to date
Key
Description
Weekly
Allows you to jump to a specific date.
up/down navigation key
left/right navigation key
• Delete past
Daily
Delete past schedule event that has already been notified.
• Delete all
Note Your phone should be switched on to use this function.
Delete all schedules. You are asked to confirm your action.
• View
Press [Options] to delete or edit the note you selected.
• Edit
Note You can see Edit, Delete,View all schedules, Delete
past, and Delete all menus dependent on setting of the
schedule.
Allows you to edit the schedule.
• Delete
Allows you to delete the schedule.
• Add new
You can edit maximum of 30 characters and create up to 30
notes.
• Calendar
Allows you to consult the calendar.
70
71
Organizer
Organizer
Memo
Phonebook
Menu 5.2
Menu 5.3
You can store phone numbers and their corresponding names in
the memory of your SIM card. In addition, you can store up to 255
numbers and names in the phone memory. The SIM card and
phone memories, although physically separate, are used as if they
were a single entity, called the phonebook.
To write, edit and delete a memo on a specific date, proceed as
follows.
1. Scroll to highlight Memo.
2. Press the left soft key [Add].
3. Input the memo and press the left soft key [Options].
1. To use the Phonebook, press the right soft key [Names] in
the standby mode.
The following options are available.
2. To use the Phonebook, press the left soft key [Menu] in the
]
Save: Allows you to save the memo.
standby mode and select the Organizer.
]
T9 languages: Allows you to select the T9 language to use in
memo.
Note To use the Phonebook, press the right soft key [Names] in
standby mode or press the left soft key [Menu],
,
.
]
Exit editor: Allows you to exit in memo editor.
Or
(Menu 5.3.1)
Search
1. Select a Memo.
2. Press the left soft key [Select].
3. Press the left soft key [Options].
1. When the idle screen is displayed, press the right soft key
[Names]. You are asked to enter a name.
2. Enter the start of the name that you wish to find and press
The following options are available.
the left soft key [Search].
]
Edit: If you select a memo that already exists, you can press
the left soft key [Options ꢀ Edit] to edit the memo displayed.
Note You can also scroll through the phonebook from the
beginning, by pressing the left soft key [Search] directly.
]
Delete: Allows you to delete the memo. You can press the left
soft key [Options ꢀ Delete] to edit the memo displayed.
3. If you want to edit, delete, copy an entry, or to add the voice to
one, select [Options].
]
Add new: Add a new memo, up to 20 memos and 40
characters per each memo.
4. Once you have found the required entry, press the
to dial
the number.
• View detail: To view in detail the selected name.
]
Delete all: Allows you to delete all memos. You are asked to
confirm your action.
• Edit: You can edit the name, number, E-mail group and memo
by press the left soft key [OK].
• Delete: You can delete an entry.
• Write text message: You can write a text message. For
further details, see page 39.
• Write multimedia message: You can write a multimedia
message. For further details, see page 43.
72
73
Organizer
Organizer
(Menu 5.3.3)
• Copy: You can copy an entry from SIM to phone or from phone
to SIM.
Speed Dials
You can assign any of the keys,
to
with a name list entry.
You can call directly by pressing this key for 2-3 seconds.
• Voice: You can add voice to the entry or change the voice tag.
• Main number: You can select the main number out of your
mobile, home or office numbers. Choose the one that is most
often used. The main number will be displayed first, if you set
this.
1. Open the phonebook first by pressing the right soft key
[Names] in a standby mode.
2. Scroll to Speed Dials, then press the left soft key [OK].
3. If you want to add a number to speed dial, select <Empty>.
(Menu 5.3.2)
Add New
Then, you can search the name from the phonebook.
You can add a phonebook entry by using this function. Phone
memory capacity is 255 entries. SIM card memory capacity
depends on the cellular service provider. You can also save 20
characters of name in the phone memory, and save characters in
the SIM card. The number of characters is dependent on the SIM.
4. Select the name from the speed dial. You can change and
delete the name. In addition, you can call by this number, write
text message, and multimedia message.
(Menu 5.3.4)
Voice List
1. Open the phonebook first by pressing the right soft key
You can see all the phone numbers which contain voice. You can
[Names] in standby mode.
also call directly by pressing the
key. After selecting the
phone number by using the up/down navigation keys, press the left
soft key [Options] and it will offer the following submenus:
2. Scroll to highlight Add New, and press the left soft key [OK].
3. Select the memory you want to save: SIM or Phone.
a. Enter a name and then press the down navigation key.
b. Enter a number and then press the down navigation key.
• Play: You can play back the voice attached to a phone number.
• Change: You can change the voice attached to a phone
number.
• Delete: You can delete the voice attached to a phone number.
• Call: You can call by selecting this submenu.
c. You can set a group for the entry by pressing the right/left
navigation key.
d. Press left soft key [Save].
• Add new: You can add a new voice to phone number.
You should say the words within 2 seconds, and the phone asks
you to say it again to ensure the accuracy of voice recognition.
• Delete all: You can delete all the voice attached to a phone
number.
Note The voice can only be attached to the main number which you
set. For example, if you change the main number, voice will be
automatically attached to the changed number. This means that
you cannot attach voice to mobile, office and home numbers
simultaneously. You can add a voice tag to a phone number in
the SIM card. The voice tag can be erased if you remove or
change the SIM card.
74
75
Organizer
Organizer
The following options are available:
(Menu 5.3.5)
Caller Groups
• Keep original: When copying, Original Dial Number is kept.
There are 7 predefined groups as well as one additional group
labeled Others where you can create your own lists.
• Delete original: When copying, Original Dial Number will
be erased.
1. You can set the phone to ring in a specific way and display a
preselected graphic icon when a particular person calls you.
(Menu 5.3.7)
Delete All
2. Scroll to Caller Groups then press the left soft key [OK] to enter
You can delete all entries in the SIM, Phone and Voice list. This
this menu.
function requires the security code except for Voice.
3. Every Group list will be displayed : Family, VIP, Friends,
Press the
key to return to the standby mode.
Colleague, Group 1, Group 2, Others.
4. Select the Group name that you want to manage by pressing
(Menu 5.3.8)
Settings
the left soft key [Options].
1. Set memory: Scroll to highlight the Set memory option,
5. You will see the following submenus under the predefined groups
then press the left soft key [OK].
except for the Others group.
• If you select Variable when adding entry, the phone will ask
where to store.
• Member list: Allows you to see the member list in the group.
• Group ring tone: Allows you to select the ring tone to be used
when you receive a voice phone call from a person in the group.
• If you select SIM or Phone, the phone will store an entry to
the SIM or the phone.
• Group icon: Allows you to select the graphic icon to be
displayed when you receive a call from a person in the group.
2. Search by: Scroll to highlight the Search by option, then
press the left soft key [OK].
• Add member: Allows you to add the member to the group.
• If you select Variable, the phone will ask how to search.
• If you select Name or Number, the phone will search an
entry by Name or the Number.
• Delete member: Allows you to delete the member in the
group.
• Rename: Allows you to assign a name to the group.
(Menu 5.3.6)
Copy All
You can copy or move entries from the SIM card memory to the
phone memory and vice versa.
]
SIM to Phone: You can copy the entry from the SIM card to
phone memory.
]
Phone to SIM: You can copy the entry from the phone memory
to the SIM card.
76
77
Organizer
Fun & Tools
(Menu 5.3.9)
Information
Menu 6.1
Game
Service dial number: You can view the list of Service Dialing
Numbers (SDN) assigned by your network provider(If supported
by the SIM card). Such numbers include the emergency,
directory assistance and voice mail numbers.
]
When you select this game, the following options are available.
*
Note The control keys are different depending on the game.
Each game includes an introduction on the main control keys.
The common keys are listed below.
1. Select the Service dial number option.
2. The names of the available services will be shown.
3. Use the up/down navigation keys to select a service. Press the
key
[Common Key Function]
left/right soft keys : Game menu
: Game start
]
Check memory: You can check how many names and
: Pause or resume a game
numbers are stored in the phonebook (SIM card and phone
memories).
]
Own number: Allows you to display your phone number in the
SIM card.
*
New game: Allows you to start a game.
High score: Enables you to view the highest score recorded for
the selected game.
Instruction: Help text on how to play the game.
Key info: Describes the buttons used by the game.
Continue: Allows you to continue playing the game.
My Folder
Menu 6.2
Enables you to download pictures or sounds which can be used as
ringtone. You can view, listen, delete or rename downloaded data.
In the My folder menu, the following options are available:
(Menu 6.2.1)
Picture
If you get a picture from a WAP site or camera, you can view the
sub-menus as follow:
1. Send via multimedia message
2. Set as wallpaper
3. Edit title
4. Delete
5. Delete all
:
78
Shown only if supported by SIM card
79
*
Fun & Tools
Fun & Tools
If you get a picture from EMS, you can view the sub-menus as
follow:
4. Edit title
5. Delete
6. Delete all
1. Send via text message
2. Edit title
3. Delete
4. Delete all
Send via text message: You can send the title for each
downloaded content.
Send via multimedia message: You can send the title for
each downloaded content.
(Menu 6.2.2)
Animation
Set as wallpaper: You can set downloaded pictures as
wallpaper.
If you get an animation from WAP site, you can view the sub-menus
as follow:
Set as ring tone: You can set downloaded sounds as ring tone.
Edit title: You can edit the title for each downloaded content.
Delete: You can delete each downloaded content.
1. Send via multimedia message
2. Edit title
3. Delete
4. Delete all
Delete all: You can delete all downloaded content.
If you get an animation from EMS or SMS, you can view the sub-
menus as follow:
Menu 6.3
Unit Converter
1. Send via text message
2. Edit title
3. Delete
4. Delete all
This converts any measurement into a unit you want.
There are 4 types that can be converted into units: Length,
Surface, Weight, and Volume.
1. You can select one of four unit types by pressing the left soft key
(Menu 6.2.3)
Sound
[Unit].
2. Select the standard value by using the left/right navigation keys.
If you get a sound from a WAP site, you can view the sub-menus as
follow:
3. Select the unit you want to convert by pressing the up/down
1. Send via multimedia message
2. Set as ring tone
3. Edit title
navigation keys.
4. You can check the converted value for the unit you want. Also,
you can input a decimal number by pressing the
key.
4. Delete
5. Delete all
If you get a sound from EMS, you can view the sub-menus as
follow:
1. Send via text message
2. Send via multimedia message
3. Set as ring tone
80
81
Fun & Tools
Fun & Tools
Menu 6.4
Menu 6.6
Calculator
Voice Recorder
Using this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions: addition,
subtraction, multiplication and division(Can enter numbers up to the
second decimal place).
Allows you to record a memo. You can record up to 10 voice
messages with each message up to 30 seconds.
You can use the Voice Memo feature to:
• Play the recorded voice memos
• Delete one or all voice memos
Using the Calculator
Note To use voice recorder, press the
key in standby mode or
.
1. Enter the first number using the numeric keys.
press the left soft key[Menu],
,
2. Use the navigation keys to select a sign for calculation.
1. Press and hold down the
key in standby mode.
Note To include a decimal point, press the
key.
2. Once recording is started, the message ‘Recording...’ and the
remaining time is displayed.
3. To calculate the result, press the left soft key [Result]or
key.
3. If you want to finish recording, press the left soft key [Save].
Menu 6.5
World Time
Note If all memo locations are full, you must delete an old memo
before recording a new one.
Allows you to check the current Greenwich Mean Time(GMT) and
51 major cities around the world, using the left/right navigation
keys.
• Play: Allows you to play back all memos recorded, starting with
the most recent memo. The screen displays the date and time
when the memo was recorded.
The screen shows the city name, current date and time.
• Delete: Allows you to delete a specific memo. All memos
recorded are played back, starting with the most recent one.
To select the time zone in which you are located, proceed as
follows:
• Record now: Allows you to record a memo.
1. Select the city corresponding to your time zone by pressing the
left/right navigation keys one or more times. The local date and
time are displayed.
]
Delete all: Allows you to delete all memos. Press the left soft
key[OK] to confirm.
2. Press the left soft key [Options].
3. If you want to set, press
key.
4. If you want to set Summer time, press the
key in
Options menu.
Note The time zone setting of each city in World time menu may be
affected by network condition.
82
83
Fun & Tools
Internet
You can access various WAP(Wireless Application Protocol)
services such as banking, news, weather reports, and flight
information. These services are specially designed for mobile
phones and they are maintained by the WAP service providers.
Menu 6.7
Infrared
This feature allows you to send or receive data/fax through the
infrared port. To use an infrared connection:
• Install the modem driver for receiving or sending the data/fax.
Check the availability of WAP services, pricing and tariffs with your
network operator and/or the service provider whose service you
wish to use. Service providers will also give you instructions on how
to use their services.
• Install the network dial-up software supplied by your service
provider or fax application program for a fax call on your PC.
• Configure and activate an IrDA-compliant infrared port on your
PC.
Please contact your service provider to open an Internet account.
To use the Web Browser, you must indicate your phone number via
the Own number menu option (See page 78 for further details.)
• Activate the infrared feature on the phone; the
on the right side at the bottom of the display.
symbol appears
To launch the browser in standby mode, press and hold down the
key.
• Dial the network service number given to you by the service
provider.
Once connected, the homepage is displayed. The content
depends on the service provider.
If there is no communication between your phone and the IrDA-
compliant device within 30 seconds after activation of the feature, it
is automatically deactivated.
You can open any WWW page by entering its URL address.
To exit the browser at any time, press the
is displayed.
key. The idle screen
For further details, contact your service provider.
Navigating with the WAP Browser
You can surf the Internet using either the phone keys or the WAP
Browser menu.
IrDA port
Using the Phone Keys
When surfing the Internet, the phone keys function differently from
the phone mode.
IrDA port
Key
Description
up/down navigation key
left navigation key
Scroll each line of the content area
Return to the previous page
Return to the startup homepage
PC Sync PC Sync is a program for data exchange between PC
and the phone by a data cable. Therefore, if you want to
use this function, you have to buy the accessory kit.
84
85
Internet
Internet
Using the WAP Browser Menu
Menu 7.1
Home
There are various menu options available when surfing the Wireless
Web.
Connect to a homepage. The homepage may be the site which is
defined in the activated profile. It will be defined by the Service
Provider if you have not defined it in the activated profile.
Note The WAP Browser menus may vary, depending on your
version of the browser.
Bookmarks
Menu 7.2
]
Home: Connect the homepage which was set in active profile.
Your phone may have some pre-installed bookmarks for sites not
affiliated with LG. LG does not warrant or endorse these sites. If
you choose to access them, you should take the same precautions,
for security or content, as you would with any site.
]
Bookmarks: Set the current homepage as a new bookmark or
move the established bookmark.
]
Forward: Move to previous page.
The following example shows the functionality of browser menu
‘Forward’.
Options in the Bookmarks view
Options available in the Bookmarks are: Open, New bookmark,
New folder, Connect, View, Edit, Move, Delete, New bookmark, and
New folder.
1. Navigation Page A ꢀ Page B ꢀ Page C ꢀ Page D
2. On Page D, select a menu ‘Back’, it will place a user in Page C.
3. On Page C, if select a menu ‘Back’, move to Page B. else if
]
Inbox
select a menu ‘Forward’, move to Page D again.
A subfolder in which URLs extracted from SMS messages is saved.
• Open: View the list in inbox.
]
Go to URL: Connect to the specific URL after editing.
]
History: View all URL lists which have connected so far.
• New bookmark: Add new URL as a bookmark.
• New folder: Create new folder for bookmark.
]
Save items: Save the item in current page which you connect.
]
Snapshots: Save current page.
]
Home
]
Messages: Save the short message or push message.
Home has URL information defined by Cingular. This menu is set
as a default.
Each bookmark supports option menus as follows:
]
Reload: Connect the server again and then bring back the
page.
]
Clear Cache: Remove all contexts saved in cache.
• Connect: Connect the bookmark.
• View: Check the bookmark setting.
• Edit: Modify the bookmark setting.
• Move: Move the bookmark to the other folder.
• Delete: Delete current bookmark.
]
Mail server: Set or move to the mail server.
]
Advanced: Set the specific item related to connect or display
the browser.
]
About: View the information of S/W version.
86
87
Internet
Internet
• New bookmark: Create new bookmark in current folder.
Menu 7.3
Push Messages
• New folder: Create new sub-folder.
(Menu 7.3.1)
Inbox
]
Tone Download: Download the ringtone from the selected
URL address.
You can order push messages from WAP service providers.
Push messages are notifications of, for example, news headlines
and they may contain a text message or address of a WAP service.
For availability and subscription, contact your WAP service
provider.
• Connect: Connect to the URL address to download the
ringtone.
• View: Check the settings of profile.
• Edit: Modify the settings of profile.
Service providers can update an existing push message every time
a new push message is received. Messages can be updated even
if you have moved them to another folder. Push messages expire
and they are deleted automatically.
• Move: Move the ringtone to the other folder.
• Delete: Delete the URL address.
• New bookmark: Create new bookmark in current folder.
• New folder: Create new sub-folder.
• Information: Shows the information of received push
messages.
• Load: Allows you to connect to a specific site using the
information in the received push message.
]
Graphic Download: Download the graphic from the selected
URL address.
• Delete: Delete the selected push message.
• Connect: Connect to the URL address to download the
graphic.
(Menu 7.3.2)
Receive
• View: Check the settings of profile.
You can set the option whether you will receive the message or not.
• Edit: Modify the settings of profile.
• Move: Move the graphic to the other folder.
• Delete: Delete the URL address.
• New bookmark: Create new bookmark in current folder.
• New folder: Create new sub-folder.
E-mail server
]
]
• Connect: Connect to the E-mail server that you configured.
• Edit address: Edit the E-mail address.
Delete all: Allows you to erase all bookmarks.
88
89
Internet
Internet
(Menu 7.6.1)
(Menu 7.6.2)
Clear Cache
Menu 7.4
Profiles
Remove all contexts saved in cache.
A Profile is the network information used to connect to the internet.
Cingular supports three kinds of profiles: Express, Home and Roam.
Express is used to connect to the internet using GPRS,
Home uses CSD (Circuit Switched Data) with Cingular gateways,
and Roam uses CSD without the Cingular network.
Because Cingular also selects a bearer automatically according to
the current network status, the user doesn’t need to select any of
them.
Cache Check
Set a value whether a connection attempt is made through cache
or not.
Note A cache is a buffer memory, which is used to store data
temporarily.
Express
Home
Roam
Menu 7.7
Security Certificates
A list of the available certificates is shown.
1. Activate
2. Settings
3. Rename
4. Delete
1. Activate
2. Settings
3. Rename
4. Delete
1. Activate
2. Settings
3. Rename
4. Delete
Menu 7.8
Reset Profiles
You can reset profiles to return to original settings.
5. New profile
5. New profile
5. New profile
Menu 7.9
WAP Information
The WAP Browser version is displayed.
Each profile has submenus as follows:
]
Activate: Set a current profile as a default.
]
Settings: Edit the various items of the current profile.
Rename: Revise the name of profile.
Delete: Delete the profile.
]
]
]
New profile: Create new profile.
Menu 7.5
Go to URL
You can directly connect to the site you want. You need to enter a
specific URL.
Menu 7.6
Cache Settings
The information or services you have accessed are stored in the
cache memory of the phone.
90
91
Java
Java
Java is a technology developed by Sun Microsystems. Similar to
the way you would download the Java Applet using the standard
Netscape or MS Internet Explorer browsers, Java MIDlet can be
downloaded using the WAP enabled phone. Depending on the
service provider, all Java based programs such as Java games
can be downloaded and run on a phone. Once downloaded, the
Java program can be viewed within the Applications menu where
you can select, execute, update or delete. The Java program files
saved in the phone are in .JAD and .JAR formats.
Warning In order to update a program, the WAP Access Point (also
known as Profile in Java) data connection is activated.
For more information, please contact your service
provider or network operator.
Menu 8.2
Download
When a new Java program is downloaded using the WAP, the
address from which a download takes place is known as a
bookmark. The Java menu includes a bookmark list for
downloading Java programs and this bookmark list can be viewed
from the Download menu. You can connect, view, edit, delete, and
add new bookmarks.
Note The JAR file is a compressed format of the Java program and
the JAD file is a description file that includes all detailed
information. From the network, prior to download, you can view
all detailed file descriptions from the JAD file.
Warning Only J2ME (Java 2 Micro Edition) based programs will run
in a phone environment.
]
Connect: Selected address in the bookmark is used for data
connection. After successful connection, desired Java program
can be downloaded from the list.
The J2SE (Java 2 Standard Edition) based programs will
only run in a PC environment.
]
View: Detailed information on a bookmark can be viewed such
as name of bookmark, address of bookmark, and user ID
Applications
Menu 8.1
Application menu displays the list of Java programs downloaded
using the WAP. All previous downloaded programs can be
selected, deleted, updated or viewed in detail within the
Application menu. From the list within the Application menu, the
following options are available:
required for connecting to certain sites.
]
Edit: Selected bookmark can be edited. Editing a bookmark is
done in the order of URL ꢀ Title ꢀ Profile(Access Point) ꢀ User
ID ꢀ Password. When creating a new bookmark, same order is
followed. The service provider can require user ID and password
information, but if none is provided, no input is necessary.
]
Open: Open the selected program. The list includes all Java
programs installed in the phone.
]
Delete: Selected bookmark is deleted. All bookmarks can be
]
Delete: Delete the selected program. Once deleted, you will
deleted completely from the bookmark list screen. Deleted
bookmark cannot be restored so caution is required when
deleting bookmarks.
not be able to restore the program unless it is downloaded again
using the WAP.
]
Update: Update the selected program. Updating means
]
Add new: New bookmark is added. The same order used
accessing the Internet for upgrade version of the selected
program. From this menu option, a data connection is made with
the appropriate server and all necessary updated program
information will be obtained.
during Edit bookmark applies to Add new bookmark. Select the
Add new option from the bookmark menu or when no bookmark
exists, then the Add new can be selected from the bookmark list
screen.
]
Details: Display detailed information on the selected program.
This includes the program name, program size, program
version, vendor information and the website address or the URL.
92
93
Java
Camera
This feature offers the capability to use the external camera to take
photos with the phone. The phone supports 3 modes that can be
set to capture images and they are 128x96, 160x120 and 320x240.
However Zoom, Brightness, Color/Gray setting, Video Mode and
Continuous Capture functions are not supported except for
Up/Down Display switching.
Note After selecting the Connect function to access the Java MIDlet
Provider's server, you may choose one of many Java
programs to download and install into your phone. Once
connected to the server, the Go button can be pressed to view
the JAD information on a desired program. The Get button will
begin the download and install process. The download and
install process will take place simultaneously and once
download is complete you can immediately run the Java
program. The installed Java program can be selected to run at
a later time from the Application menu.
Within the camera feature, there are Capture Mode, My Album, and
Memory Status options.
Menu 8.3
Capture Mode
Menu 9.1
View Information
The downloaded programs using the WAP are stored in the phone
memory. There is a maximum memory capacity in a phone and
once you exceed this memory, you will not be able to store any
more programs. The View Information menu allows you to check
the available memory capacity in a phone.
In the Capture mode, the ‘Detecting’ message will be displayed.
This process takes a maximum of 7 seconds to verify if the camera
has been installed properly.
The ‘No Camera’ message indicates an improperly installed
camera. When the external camera is attached, the phone checks
for available memory capacity.
If not enough memory is available, the ‘No Memory’ message is
displayed. If the camera can't take photos at the current image size
setting, then the next maximum available image size can be
selected by using the up/down navigation key within the capture
(Menu 8.3.1)
Memory Status
Displays maximum memory capacity and total available memory
information.
mode function. If the
photos taken will be automatically stored in the memory.
is pressed during the capture mode, all
(Menu 8.3.2)
Java Version
Displays current Java version.
When you press the left soft key from the capture mode function,
following options appear.
1. Set size: To change the image size.
2. Shutter sound: To change the shutter sound.
Sound 1 / Sound 2 / Sound 3 / No sound
3. Album: To go to the Album mode.
4. Exit: To exit the Capture mode.
When the OK key is pressed from the Capture (Preview) mode, it
will take you to the Capture mode where photos can be taken.
The right soft key will delete current captured photo image.
94
95
Camera
Camera
The left soft key[Options] will bring up the following options.
1. Capture mode: Capture (Preview) mode.
2. Rename: Change the title of selected image.
3. Delete: Delete captured photo image.
Menu 9.3
Memory Status
This indicates the available memory capacity. The total available
memory is 300KB and the remaining capacity is displayed.
To switch image size within the
Capture mode
4. Send via multimedia message: Send MMS picture
message using current image.
5. Set as wallpaper: Set current photo image as a wallpaper.
6. Album: Album mode.
Options Reverse
7. Exit: Exit to Camera mode.
photo 001
Auto save status after taking
the photo.
Menu 9.2
My Album
This feature offers the ability to store all captured photo images in
an album. When no images have been captured, the ‘No image’
message will be displayed.
The Album mode will display the last image viewed. The title of the
image will be displayed on top as well as the total number of
images and the index number of the displayed image. The
Left/Right navigation key is used to view previous or next image.
Options Delete
When memory is full.
Left soft key will bring up following options.
1. List view: Lists the titles of the images. When you press the
OK key or the left soft key, then you will be in the Album mode.
No Memory
Options Reverse
2. Delete: Delete current image.
3. Send via multimedia message: Send MMS picture
message using current image.
4. Set as wallpaper: Set selected photo image as a wallpaper.
5. Picture information: Displays Title, Size, Date and Time
information on selected image.
6. Rename: Change the title of selected image.
7. Delete all: Delete all images in the album.
96
97
Q&A
&
Q A
Please check to see if any problems you have encountered with the
phone are described in this section before taking the phone in for a
service or calling a service engineer.
Q Why is there an echo when a connection is made with certain
telephones in a certain area?
A This is called the ‘Echo Phenomenon’, where it occurs if
connection volume is too high or caused by special properties
(semi electronic telephone exchange) of the equipment on the
other end.
Q How do I view the list of outgoing calls, incoming calls and
missed calls?
A Press the
key.
Q Why does the phone heat up?
A The phone may get hot when there is a very long call duration or
when games are played or even when surfing the Internet for a
long time. This has no effect upon the life of the product or
performance.
Q How do I clear all call history?
A Press the left soft key[Menu] and then the
key.
Q How do I view all numbers stored in memory?
A Press right soft key[Names] and then
.
Q Why is there no ring tone, but only a blinking LCD screen?
A Phone may be set to ‘Vibrate only’ or in ‘Silent’ mode. In the
Profiles menu, please select ‘General’ or ‘Loud’.
Q Why is the connection abrupt or not audible in certain areas?
A When frequency environment is unstable in a certain area,
connection may be abrupt and not audible. Relocate to another
area and try again.
Q Why does the battery life get shorter in standby mode?
A The battery is worn out. As time passes, the battery life
gradually becomes shorter. If the battery lasts about half the
amount of time as when first purchased, it’s time to purchase a
new battery.
Q Why is the connection not consistent or abrupt even when
established?
A When frequency is unstable or weak or if there are too many
users, connection may be cut off even after it was established.
Please try again later or attempt after relocating to other areas.
Q Why does the battery run out so quickly during normal use?
A It is due to the user environment or a large number of calls or
weak signal.
Q Why does the LCD not turn on?
A Remove the battery and turn on the power after placing it back
Q Why is no number dialed when you recall a phonebook entry?
on. If there is no change, fully charge the battery and try again.
A Check that the number has been stored correctly by using the
Phone book Search feature. Re-store them, if necessary.
98
99
Q&A
Accessories
There are a variety of accessories available for your mobile phone.
You can select these options according to your personal
communication requirements. Consult your local dealer for
availability.
Q Why can’t my correspondent reach me?
A Is you phone switched on (
pressed for more than three
seconds)? Are you accessing the right cellular network? Or, you
may have set an incoming call barring option.
Travel Adapter
Q I cannot find the lock, PIN, or PUK code. What is my password?
This adapter allows you to charge the
battery.
It supports standard U.S. 120 Volt 60Hz
outlets.
A The default lock code is ‘0000’. If you forget or lose the lock
code, contact your phone dealer. If you forget or lose a PIN or
PUK code, or if you have not received such a code, contact
your network service provider
It takes 5 hours to charge a completely
discharged battery.
Battery
Standard battery is available.
Vehicle Power Adapter
You can operate the phone and trickle
charge the phone battery from your
vehicle by using the vehicle power
adapter.
It takes 5 hours to charge a completely
discharged battery.
Headset
Connects to your phone, allowing hands-
free operation. Includes earpiece,
microphone, and integrated call
answer/termination button.
100
101
Accessories
Safety Guidelines
Data Cable Kit
TIA Safety Information
Connects your phone to a PC.
Provided herein is the complete TIA Safety Information for Wireless
Handheld phones. Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices is required in the owner’s
manual for CTIA Certification. Use of the remaining TIA language is
encouraged when appropriate.
Exposure to Radio Frequency Signal
Your wireless handheld portable telephone is a low-power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
Camera
In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over
120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available
body of research to develop the ANSI Standard (C95.1).
*American National Standards Institute; National Council on
Radiation Protection and Measurements; International Commission
on Non-Ionizing Radiation Protection
The design of your phone complies with the FCC guidelines (and
those standards).
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
102
103
Safety Guidelines
Safety Guidelines
]
]
Should not carry the phone in a breast pocket.
Phone Operation
Should use the ear opposite the pacemaker to minimize the
potential for interference.
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
]
If you have any reason to suspect that interference is taking
place, turn your phone OFF immediately.
Tips on Efficient Operation
For your phone to operate most efficiently:
Hearing Aids
]
Do not touch the antenna unnecessarily when the phone is in
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider.
use. Contact with the antenna affects call quality and may cause
the phone to operate at a higher power level than otherwise
needed.
Driving
Other Medical Devices
Check the laws and regulations on the use of wireless phones in
the areas where you drive. Always obey them. Also, if using your
phone while driving, please:
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
]
Give full attention to driving — driving safely is your first
responsibility;
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
]
Use hands-free operation, if available;
]
Pull off the road and park before making or answering a call if
driving conditions so require.
Vehicles
Electronic Devices
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer
or its representative regarding your vehicle.
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
You should also consult the manufacturer of any equipment that
has been added to your vehicle.
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of six (6’) inches be maintained between a
handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations
of Wireless Technology Research.
Posted Facilities
Turn your phone OFF in any facility where posted notices so
require.
Aircraft
FCC regulations prohibit using your phone while in the air. Turn
your phone OFF before boarding an aircraft.
Persons with pacemakers:
]
Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON;
104
105
Safety Guidelines
Safety Guidelines
Blasting Areas
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for Devices and
Radiological Health Consumer Update on Mobile Phones.
To avoid interfering with blasting operations, turn your phone OFF
when in a ‘blasting area’ or in areas posted: ‘Turn off two-way
radio’. Obey all signs and instructions.
1.Do wireless phones pose a health hazard?
Potentially Explosive Atmosphere
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death.
Wireless phones emit low levels of radiofrequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the standby mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
Areas with a potentially explosive atmosphere are often, but not
always, marked clearly. Potential areas may include: fueling areas
(such as gasoline stations); below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal powders); and
any other area where you would normally be advised to turn off
your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
2.What is the FDA's role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level
that is hazardous to the user. In such a case, the FDA could
require the manufacturers of wireless phones to notify users of
the health hazard and to repair, replace, or recall the phones so
that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the wireless phone industry to take a
number of steps, including the following:
106
107
Safety Guidelines
Safety Guidelines
]
Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
3.What kinds of phones are the subject of this
update?
]
]
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
The term ‘wireless phone’ refers here to handheld wireless
phones with built-in antennas, often called ‘cell’, ‘mobile’, or ‘PCS’
phones. These types of wireless phones can expose the user to
measurable radiofrequency energy (RF) because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety guidelines that
were developed with the advice of the FDA and other federal
health and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called ‘cordless
phones,’ which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels, and
thus produce RF exposures far below the FCC safety limits.
Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
The FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF safety
to ensure coordinated efforts at the federal level. The following
agencies belong to this working group:
o National Institute for Occupational Safety and Health
o Environmental Protection Agency
o Occupational Safety and Health Administration
o National Telecommunications and Information Administration
4.What are the results of the research done
already?
The National Institutes of Health participates in some interagency
working group activities, as well.
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research methods.
Animal experiments investigating the effects of radiofrequency
energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have suggested that
low levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been
genetically engineered or treated with cancer-causing chemicals
so as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22
hours per day. These conditions are not similar to the conditions
under which people use wireless phones, so we don’t know with
certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
The FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on the FDA and
other health agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base
stations are thus not the subject of the safety questions discussed
in this document.
108
109
Safety Guidelines
Safety Guidelines
possible association between the use of wireless phones and
The FDA has been a leading participant in the World Health
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term exposures,
since the average period of phone use in these studies was around
three years.
Organization International Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The project has also helped develop a series of
public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through
contracts with independent investigators. The initial research will
include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
5.What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the
data that are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time tumors
develop — if they do — may be many, many years. The
7.How can I find out how much radio frequency
energy exposure I can get by using my
wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC established these
guidelines in consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF exposure from
wireless telephones is set at a Specific Absorption Rate (SAR) of
1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with
the safety standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes
into consideration the body’s ability to remove heat from the
tissues that absorb energy from the wireless phone and is set
well below levels known to have effects. Manufacturers of
wireless phones must report the RF exposure level for each
model of phone to the FCC. The FCC website
interpretation of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day use of wireless
phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model of phone is used.
6.What is the FDA doing to find out more about
the possible health effects of wireless phone
RF?
The FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radiofrequency energy
(RF).
110
111
Safety Guidelines
Safety Guidelines
If you must conduct extended conversations by wireless phone
FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless
phone use.
8.What has the FDA done to measure the radio
frequency energy coming from wireless
phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio
frequency energy (RF) exposure from wireless phones and other
wireless handsets with the participation and leadership of FDA
scientists and engineers. The standard, ‘Recommended Practice
for Determining the Spatial-Peak Specific Absorption Rate (SAR)
in the Human Body Due to Wireless Communications Devices:
Experimental Techniques,’ sets forth the first consistent test
methodology for measuring the rate at which RF is deposited in
the heads of wireless phone users. The test method uses a
tissue-simulating model of the human head. Standardized SAR
test methodology is expected to greatly improve the consistency
of measurements made at different laboratories on the same
phone. SAR is the measurement of the amount of energy
absorbed in tissue, either by the whole body or a small part of the
body. It is measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone
complies with safety guidelines.
10.What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want
to take steps to lower exposure to radiofrequency energy (RF),
the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and
the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists that
using a wireless phone causes brain tumors or other ill effects.
Their recommendation to limit wireless phone use by children
was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
9.What steps can I take to reduce my exposure
to radiofrequency energy from my wireless
phone?
If there is a risk from these products — and at this point we do
not know that there is — it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
11.What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, the FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
112
113
Safety Guidelines
Safety Guidelines
part of a standard sponsored by the Association for the
Consumer Information on SAR
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by the FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard
will allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI.
(Specific Absorption Rate)
This Model Phone Meets the Government’s
Requirements for Exposure to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a ‘compatible’ phone
and a ‘compatible’ hearing aid at the same time. This standard
was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should harmful
interference be found to occur, the FDA will conduct testing to
assess the interference and work to resolve the problem.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are
conducted using standard operating positions specified by the
FCC with the phone transmitting at its highest certified power level
in all tested frequency bands. Although SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. Because
the phone is designed to operate at multiple power levels to use
only the power required to reach the network, in general, the closer
you are to a wireless base station antenna, the lower the power
output.
12.Where can I find additional information?
For additional information, please refer to the following
resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested for
use at the ear is 0.714 W/kg and when worn on the body, as
114
115
Safety Guidelines
Glossary
described in this user’s manual, is 0.482 W/kg. (Body-worn
To help you understand the main technical terms and abbreviations
used in this booklet and take full advantage of the feature on your
mobile phone, here are a few definitions.
measurements differ among phone models, depending upon
available accessories and FCC requirements.) While there may be
differences between SAR levels of various phones and at various
positions, they all meet the government requirement for safe
exposure.
Call Barring
Ability to restrict outgoing and incoming calls.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
FCC ID BEJG4050.
Call Divert
Ability to reroute calls to another number.
Call waiting
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
Ability to inform users that they have an incoming call when
engaged on another call.
GPRS (General Packet Radio Service)
*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
GPRS guaranties continuous connection to the Internet for mobile
phone and computer users. It is based on the Global System for
Mobile Communication (GSM) circuit-switched cellular phone
connections and the Short Message Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication, guaranteeing
compatibility between the various network operators. GSM covers
most European countries and many other parts of the world.
Java
Programming language generating applications that can run on all
hardware platforms, whether small, medium or large, without
modification. It has been promoted for and geared heavily to the
Web, both for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java applet. When it
is run on a mobile phone or pager, it is called a MIDlet.
116
117
Glossary
Glossary
Line Identification Services (Caller ID)
SMS (Short Message Service)
Service allowing subscribers to view or block the telephone
numbers of callers.
Network service sending and receiving messages to and from
another subscriber without having to speak to the correspondent.
The message created or received (up to 160 characters long) can
be displayed, received, edited or sent.
Multiparty Calls
Ability to establish a conference call involving up to five additional
parties.
Phone Password
Security code used to unlock the phone when you have selected
the option to lock it automatically each time it switches on.
Roaming
Use of your phone when you are outside your home area (when
traveling for example).
SDN (Service Dial Number)
Telephone numbers supplied by your network provider and giving
access to special services, such as voice mail, directory inquiries,
customer support and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to operate
the phone (network and memory information, as well as the
subscriber's personal data). The SIM card fits into a small slot on
the back of the phone and is protected by the battery.
Patent Information
This product was manufactured under one or more of the following U.S.
patents: 5276765 5749067 6061647
P/N: MMBB0102401 (1.0)
DATE: 2003.09.09
118
119
Index
Index
Call cost’s limit
Call divert
54
61
Last call’s cost
54
29
A
F
FDN
Fixed dial number
Lower case
Access codes
Accessories
Active flip
22
101
14,15
74
66
66
Call durations
Call register
Call waiting
53
M
52
Flip open
62
Making a Call
24
24
31,62,117
95,102
66
Add new
G
Game
Making international calls
Manner Mode
Menu tree
Camera
Add member
Adjusting the volume
Alarm clock
Album
76
26
79
56
Cancel all barrings
Change password
Check memory
Clear cache
Clear key
25
35
General
66
58
Memo
72
Go to URL
GPRS
86,90
117
55
51,78
91
96
Member list
76
All calls’ cost
Answering a call
Answer mode
Auto display
Auto redial
54
Memory status
Message center url
Message key
Message types
Microphone
94,97
47
GPRS information
GPRS settings
Group icon
Group ring tone
14,15
64
25
68
Closed user group
Conference calls
Contrast
62
14,15
42
76
32
49,55
64
76
60
14,15
63
Copy all
76
H
Headset
Minute minder
Missed calls
CPHS
35,36
B
Backlight
56,57,101
52
60
23
D
Mute off
32
Barring password
I
Delete recent calls
Delivery reports
Dialed calls
53
42
Mute on
32
Battery
8,13,16,18,19,101
Inbox
In-call menu
40,44,49,87,89
31
Muting the microphone
Multimedia messages
Mutiparty calls
32
Bearer setting
Bookmarks
42
87
53
43
Infrared
Infrared port
Internet
IrDA
84
14,15
85
Display screen
Display information
14,15
17
32
C
Cache check
Calculator
Calendar
Caller groups
91
82
70
76
N
84
E
End key
Name card
Navigation Key
Network settings
New call
40,51
14,15
67
14,15
24
L
Ending a call
Entering text
E-mail server
Languages
50, 60
53
26
Call barring service
Call costs
120
65
54
16
Last call
88
121
Index
Sub LCD
16
O
Outbox
41, 45
78
T
Own number
Templates
Text messages
Time format
Travel adapter
50
39
P
Phonebook
Phone to SIM
Power key
Private call
30, 73
76
59
101
14,15
33
U
Unit converter
81
29
Upper case
R
Received Calls
52,53
83
V
Recorder
Valid period
42
56
S
Search
Vibrate
View all schedules
Voice dial
71
73
63
Security code
22,66
Voice list
75
Send
14,15,41,43,46,51
Voice mailbox mumber
Voice memo key
Voice messages
48
Send my number
Set memory
Service dial number
Schedule
62
77
14,15
48
78,118
70
W
Wallpaper
Scheduler tone
Shutter sound
Side keys
71
60, 96
86
95
WAP browser
WAP information
World time
Write message
14,15
26
91
Signal strength
Silent
82
56
39
SIM to phone
Speed dials
76
75
122
|