Kenwood KDC 5047U User Manual

CD-RECEIVER  
KDC-BT50U  
KDC-5047U  
KMR-440U  
INSTRUCTION MANUAL  
Before reading this manual, click the button below to check the latest edition  
and the modified pages.  
Check the latest edition  
© 10Stepup_IM304_Ref_En_03_E  
Before use  
Notes  
2WARNING  
• If you experience problems during installation,  
consult your Kenwood dealer.  
• When you purchase optional accessories, check with  
your Kenwood dealer to make sure that they work  
with your model and in your area.  
• Characters that conform to ISO 8859-1 can be  
displayed.  
• Characters that conform to ISO 8859-5 or ISO 8859-  
1 can be displayed. Refer to 38 Russian language  
To prevent injury or fire, take the following  
precautions:  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools) inside  
the unit.  
Before using this unit for the first time  
This unit is initially set on the Demonstration mode.  
When using this unit for the first time, cancel the  
Demonstration mode. Refer to <Exit Demonstration  
• The RDS feature won’t work where the service is not  
supported by any broadcasting station.  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on the  
display on the actual equipment, and some of the  
illustrations on the display may be inapplicable.  
How to reset your unit  
• If the unit fails to operate properly, press  
the Reset button. The unit returns to factory  
settings when the Reset button is pressed.  
Reset button  
Handling CDs  
• Do not touch the recording surface of the CD.  
• Do not stick tape etc. on the CD, or use a CD with  
tape stuck on it.  
• Do not use disc type accessories.  
• Clean from the center of the disc and move  
outward.  
• When removing CDs from this unit, pull them out  
horizontally.  
• If the CD center hole or outside rim has burrs,  
use the CD only after removing the burrs with a  
ballpoint pen etc.  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it with a  
clean soft dry cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off with  
a cloth moistened with a neutral cleaner, then wipe it  
again with a clean soft dry cloth.  
Applying spray cleaner directly to the unit may affect  
its mechanical parts. Wiping the faceplate with a  
hard cloth or using a volatile liquid such as thinner or  
alcohol may scratch the surface or erase characters.  
CDs that cannot be used  
• CDs that are not round cannot be used.  
• CDs with coloring on the recording surface or CDs  
that are dirty cannot be used.  
• This unit can only play the CDs with  
This unit may not correctly play discs which do not  
have the mark.  
• You cannot play a CD-R or CD-RW that has not  
been finalized. (For the finalization process refer to  
your CD-R/CD-RW writing software, and your CD-R/  
CD-RW recorder instruction manual.)  
Unit and Faceplate Terminals  
• To prevent deterioration, do not touch the terminals  
of the unit and faceplate with your fingers.  
.
• If the terminals on the unit or faceplate get dirty,  
wipe them with a clean soft dry cloth.  
Lens Fogging  
When you turn on the car heater in cold weather,  
dew or condensation may form on the lens in the  
CD player of the unit. Called lens fogging, this  
condensation on the lens may not allow CDs to play.  
In such a situation, remove the disc and wait for the  
condensation to evaporate. If the unit still does not  
operate normally after a while, consult your Kenwood  
dealer.  
• 3 inch CD cannot be used. Attempt to insert using  
an adapter can cause malfunction.  
English  
|
3
 
Basic Operations  
KDC-BT50U  
[
] [SRC]  
[
]
USB Terminal  
0
Release Microphone  
Disc slot  
KDC-5047U KDC-5047U  
Control  
Knob  
KMR-440U  
[DISP]  
KDC-BT50U KDC-BT50U  
KMR-440U  
[AUDIO]  
Auxiliary input  
[
] [FNC]  
[ENTER] [FAVORITE]  
[
]
[
]
Before Using  
Common Operation  
Exit Demonstration Mode  
Power and source selection  
Turn off the demonstration mode when you use it  
for the first time after installation.  
Turns the power ON by pressing the [SRC]  
button.  
When the power is ON, select a source.  
Press the [SRC] button and then turn the Control  
knob. To determine the selected source, press the  
[ENTER] button.  
1 Press the [ENTER] button to quit the  
demonstration mode when the messages “To  
Cancel DEMO Press the ENTER Key” are displayed  
(approx. 15 seconds).  
Tuner (“TUNER”) Bluetooth Audio (“BT AUDIO”)  
(KDC-BT50U only) USB (“USB”) or iPod (“iPod”)  
CD (“CD”) Auxiliary Input (“AUX”) Standby  
(“STANDBY”) Tuner...  
Press the [SRC] button for at least 1 second to  
turn the power OFF.  
2 Turn the Control knob to select “YES, and then  
press the [ENTER] button.  
The demonstration mode can also be canceled  
in the Function setting mode. Refer to 47 Demo  
Adjusting the Date  
1 Press the [FNC] button to enter the Function  
setting mode.  
You can select the source selection mode to switch  
between sources each time you press the [SRC] button. Set  
The source “iPod” and “CD” can be selected when each  
source is ready to play.  
When an optional accessory is connected, the source name  
for each device appears.  
The power will be turned off automatically after about 20  
minutes have lapsed in standby mode. (KMR-440U only)  
2 The item can be selected and determined as  
follows.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
3 Turn the Control knob to adjust the year, and  
then press the [ENTER] button.  
Volume  
4 Turn the Control knob to adjust the month, and  
then press the [ENTER] button.  
Turn the Control knob to adjust the sound  
volume.  
5 Turn the Control knob to adjust the day, and then  
press the [ENTER] button.  
Display scroll  
KDC-5047U KMR-440U  
6 Turn the Control knob to select “Date Mode, and  
Keep the [DISP] button pressed down to scroll  
through the CD, audio file, or Radio text display.  
KDC-BT50U  
then press the [ENTER] button.  
7 Turn the Control knob to select Date format, and  
then press the [ENTER] button.  
Keep the Control knob pushed towards up to  
scroll through the CD, audio file, or Radio text  
8 Press the [  
] button for at least 1 second to  
exit the Function setting mode.  
|
4
KDC-BT50U/ KDC-5047U/ KMR-440U  
     
For the playable audio files, devices, iPod, see <Appendix>  
display.  
Auxiliary input  
Portable audio device can be connected with the  
stereo mini-plug (3.5 mm ø).  
Listening to Radio  
Selecting a Tuner source  
1 Press the [SRC] button.  
Playing Music (CD/USB/iPod)  
2 Turn the Control knob to select “TUNER, and  
Playing Disc  
then press the [ENTER] button.  
Insert the disc in the Disc slot.  
When inserted, the source is switched  
automatically and a song starts playing.  
Selecting the Band  
Push the Control knob towards up to change the  
band in the order of FM1 FM2 FM3.  
Push the Control knob towards down to change  
the band to AM.  
Playing USB device  
Connect a USB device or iPod to the USB  
terminal.  
When connected, the source is switched  
automatically and a song starts playing.  
Selecting a Station  
Push the Control knob leftward and rightward to  
select the station you want to listen to.  
Selecting an Audio file folder  
Push the Control knob towards up or down to  
select a folder.  
Details of the station selecting in operation are set in the 25  
Selecting a Song  
Traffic information  
Push the Control knob towards right or left to  
select a song (track or file).  
Press the [ ] button for at least 1 second to  
turn on or off the traffic information function  
alternately.  
If traffic bulletin starts when the function is ON,  
“Traffic INFO” is displayed and traffic information  
is received.  
Fast Forwards or Fast Backwards the music  
Push and hold the Control knob towards right or  
left to fast-forward or fast-backward the audio file  
containing songs (tracks or files).  
Pause and play  
Press the [  
] button to pause or resume  
playing a song (track or file).  
Removing Disc and USB device  
Press the [0] button to eject a disc.  
Keeping the button pressed for at least 2 seconds  
enters the USB Remove mode (“USB REMOVE” is  
displayed) and the USB device can be removed  
safely.  
CA-U1EX (optional accessory) is  
recommended to connect a USB  
device.  
CA-U1EX  
KCA-iP101 (optional accessory) is recommended to connect  
an iPod.  
English  
|
5
General opreration  
Function of KDC-5047U/ KMR-440U  
Muting the audio upon reception of  
phone call  
Removing the Faceplate  
The faceplate of the unit can be detached and taken  
with you, helping to deter theft.  
The audio system automatically mutes when a call  
comes in.  
Detaching the Faceplate  
Press the Release button.  
When a call comes in  
“CALLis displayed.  
The audio system pauses.  
Listening to the audio during a call  
Press the [SRC] button.  
The “CALLdisplay disappears and the audio system  
comes back ON.  
When the call ends  
Hang up the phone.  
The “CALLdisplay disappears and the audio system  
comes back ON.  
Reattaching the Faceplate  
Refer to the following diagram when  
reattaching the faceplate.  
To use the TEL Mute feature, you need to hook up the MUTE  
wire to your telephone using a commercial telephone  
accessory. Refer to <Connecting Wires to Terminals> (Quick  
Start Guide).  
¤
Remove the faceplate at once after pressing the Release  
button; otherwise it can fall down due to vibration.  
The faceplate is a precision piece of equipment and can be  
damaged by shocks or jolts.  
Keep the faceplate in its faceplate case while detached.  
Do not place the faceplate (and the faceplate case) in areas  
exposed to direct sunlight, excessive heat or humidity. Also  
avoid places with too much dust or the possibility of water  
splashing.  
|
6
KDC-BT50U/ KDC-5047U/ KMR-440U  
Audio Adjustments  
About Supreme  
Audio Control  
Technology to extrapolate and supplement with proprietary  
algorithm, the high-frequency range that is cut off when  
encoding at low bit rate (less than 128Kbps, Sampling  
frequency is 44.1kHz).  
Supplementing is optimized by compression format (AAC,  
MP3 or WMA) and processed according to bit rate.  
The effect is negligible with music that is encoded at high  
bit rate, variable bit rate or has minimal high frequency  
range.  
You can adjust following Audio Control items;  
Display  
Audio item  
Range  
“SubWoofer”  
“Bass Boost”  
“System Q”  
Subwoofer output OFF/ON  
Bass Boost  
Preset Equalizer  
curve  
Level1/Level2/OFF  
“Rock”/“Pops”/“Easy”/  
“Top40”/Jazz”/ ”Game”/  
“Natural”/“User”‡  
“Bass Adjust”  
About Dual Zone System  
“Bass Center FRQ” Bass Center  
40/50/60/70/80/100/  
120/150 (Hz)  
–8 — +8 (dB)  
1.00/1.25/1.50/2.00  
OFF/ON  
Main source and sub source (Auxiliary input) output Front  
channel and Rear channel separately.  
- When “2Zone” is set to “ON, the main source sound and  
AUX input sound are output to the front speakers and rear  
speakers separately.  
Frequency  
Bass level  
“Bass Level”  
“Bass Q Factor” Bass Q Factor  
“Bass EXT”  
Bass Extend  
- Set up the channel of sub source by “2Zone.  
- Select Main source by [SRC] button.  
- Adjust the volume of Front channel by Control knob.  
- Adjust the volume of Rear channel by “2Zone Rear  
Volume.  
- The Audio Control has no effect on sub source.  
- When Bluetooth audio source is selected, set “2Zone F/R  
Select” to “Rear. 2Zone” cannot be turned “ON” when this  
is set to “Front. While “2Zone” is turned “ON, 2Zone F/R  
Select” function is disabled.  
“Middle Adjust”  
“Middle Center  
FRQ”  
“Middle Level”  
Middle Center  
Frequency  
Middle level  
0.5/1.0/1.5/2.0 (kHz)  
–8 — +8 (dB)  
1.00/2.00  
“Middle Q Factor” Middle Q Factor  
“Treble Adjust”  
“Treble Center FRQ” Treble Center  
Frequency  
“Treble Level”  
“Balance”  
“Fader”  
“2Zone Rear Volume” Rear volume during 0 — 35  
Dual zone  
“SubWoofer Level”  
“Detailed Settings”  
“HPF Front”  
10.0/12.5/15.0/17.5 kHz  
Treble level  
Balance  
Fader  
–8 — +8 (dB)  
Left 15 — Right 15  
Rear 15 — Front 15  
1 Select the source to adjust  
Press the [SRC] button.  
For how to select source item, refer to <Power and  
Subwoofer level  
–15 — +15 (dB)  
2 Enter Audio Control mode  
KDC-5047U KMR-440U  
Front High Pass  
Filter  
Rear High Pass Filter Through/40/60/80/100/  
120/150/180/220 (Hz)  
Through/40/60/80/100/  
120/150/180/220 (Hz)  
Press the [AUDIO] button.  
KDC-BT50U  
“HPF Rear”  
1) Press the [FNC] button.  
2) Turn the Control knob to select “Audio  
Control, and then press the [ENTER] button.  
“LPF SubWoofer” Low Pass Filter  
50/60/80/100/120/  
Through (Hz)  
“Subwoofer Phase” Subwoofer Phase Reverse (180°)/  
Normal (0°)  
3 Select the Audio item to adjust  
Turn the Control knob to select the audio item  
for adjustment and then press the [ENTER]  
button.  
“2Zone”  
Dual Zone System ON/OFF  
“2Zone F/R Select” Dual Zone output Rear/Front  
channel  
“Supreme”  
Supreme setting ON/OFF  
Press the [  
item.  
] button to return to the previous  
“Audio Preset”  
Audio Preset  
Recall/Memory  
memoy†  
“Volume Offset  
ADJ”  
Volume offset  
–8 — 0 (dB)  
(AUX: -8 — +8)  
4 Adjust the Audio item  
Turn the Control knob.  
5 Determine the setting value  
Press the [ENTER] button.  
The previous item is displayed.  
“User”: The customized Bass, Middle, and Treble levels are  
effective.  
You can set Bass, Middle, and Treble for each source.  
6 Exit Audio Control mode  
Press the [  
] button for at least 1 second.  
English  
|
7
 
Audio Adjustments  
Audio Preset Memory  
Audio Preset Recall  
Registering the value setup by Audio Control.  
Recalling the sound setup registered by <Audio  
1 Setup Audio Control  
1 Select the source  
Press the [SRC] button.  
For how to select source item, refer to <Power and  
2 Enter Audio Control mode  
KDC-5047U KMR-440U  
Press the [AUDIO] button.  
KDC-BT50U  
2 Enter Audio Control mode  
KDC-5047U KMR-440U  
1) Press the [FNC] button.  
2) Turn the Control knob to select “Audio  
Control, and then press the [ENTER] button.  
Press the [AUDIO] button.  
KDC-BT50U  
1) Press the [FNC] button.  
2) Turn the Control knob to select “Audio  
Control, and then press the [ENTER] button.  
3 Select Audio preset memory mode  
The item can be selected and determined as  
follows.  
“Detailed Settings” “Audio Preset”  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
3 Select Audio preset memory mode  
The item can be selected and determined as  
follows.  
“Detailed Settings” “Audio Preset”  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
4 Select the Audio Preset Memory  
Turn the Control knob to select “Memory, and  
then press the [ENTER] button.  
4 Select the Audio Preset Recall  
Turn the Control knob to select “Recall, and  
then press the [ENTER] button.  
5 Turn the Control knob to select “YES, and then  
press the [ENTER] button.  
“Memory Completed” is displayed.  
5 Turn the Control knob to select “YES, and then  
press the [ENTER] button.  
“Recall Completed” is displayed.  
6 Exit Audio Control mode  
Press the [  
] button for at least 1 second.  
6 Exit Audio Control mode  
To use this function, this unit must be powered for more  
than one hour.  
Press the [  
] button for at least 1 second.  
Register 1 pair of Audio Preset Memory. You cannot register  
by the source.  
When you press the Reset, all the sources will be the setting  
value which is registered.  
The following items can be registered.  
“Bass Center FRQ, Bass Level, Bass Q Factor, Bass EXT,  
“Middle Center FRQ, Middle Level, Middle Q Factor,  
Treble Center FRQ, Treble Level, SubWoofer Level, HPF  
Front, HPF Rear, LPF SubWoofer, Subwoofer Phase”  
|
8
KDC-BT50U/ KDC-5047U/ KMR-440U  
   
Music disc/Audio file Operation  
Function of Audio file/ Internal CD source  
Function of iPod source  
Music Search  
Music Search for iPod  
Selecting the music you want to listen to from the  
device or media being played now.  
Searching for the song (in iPod) you want to play.  
1 Enter Music Search mode  
Press the [ ] button.  
“MUSICSEARCH” is displayed.  
1 Enter Music Search mode  
Press the [ ] button.  
“MUSICSEARCH” is displayed.  
2 Search for music  
Operation type  
2 Search for music  
Operation  
Movement between items Turn the Control knob.  
Audio file  
Selection of item  
Press the [ENTER].  
Operation type  
Movement between  
folders/files  
Operation  
Turn the Control knob.  
Return to previous item  
Return to Top menu  
Press the [ ] button.  
Push the Control knob towards up for at  
least 1 second.  
Selection of folder/flie Press the [ENTER].  
Return to previous folder Press the [ ] button.  
Cancelling the Music Search mode  
Press the [ ] button for at least 1 second.  
Return to root folder  
Push the Control knob towards left for at  
least 1 second.  
Cancel the Music Search Press the [ ] button for at least 1 second.  
mode  
If no characters included in a song name can be displayed,  
the browse item name and digits are displayed.  
¡ indicator: Audio file  
] indicator: Folder with a folder or file in the lower  
Items  
Playlists  
Artists  
Albums  
Songs  
Display  
“PLIST***” Podcasts  
“ART***”  
“ALB***”  
“PRGM***”  
Items  
Display  
“PDCT***”  
“GEN***”  
“COM***”  
layer  
Genres  
Composers  
^ indicator: Folder without a folder or file in the  
lower layer  
CD source  
Operation type  
Operation  
Movement between track Turn the Control knob.  
Selection of track  
Press the [ENTER].  
Return to first track  
Push the Control knob towards left for at  
least 1 second.  
Cancel the Music Search Press the [ ] button.  
mode  
English  
|
9
   
Music disc/Audio file Operation  
Function of iPod source  
Function of iPod source/ Music Editor media  
Alphabet Search  
Skip Search  
You can select an alphabetic character from the  
list in the browse item (artist, album, etc.) currently  
selected.  
The number of songs to be skipped is determined  
by the ratio of the total number of songs in the list  
which is selected.  
1 Enter Music Search mode  
Press the [ ] button.  
1 Enter Music Search mode  
Press the [ ] button.  
“MUSICSEARCH” is displayed.  
“MUSICSEARCH” is displayed.  
2 Select browse item  
2 Enter Search select mode  
Turn the Control knob to select browse item,  
and then press the [ENTER] button.  
Press the [ ] button.  
3 Select Skip Search mode  
Turn the Control knob to select “Skip Search,  
and then press the [ENTER] button.  
3 Enter Search select mode  
Press the [ ] button.  
4 Select Alphabet Search mode  
Turn the Control knob to select “Alphabet  
Search, and then press the [ENTER] button.  
4 Search for music  
Operation type  
Operation  
Movement between items Turn the Control knob.  
Skip Search  
Push the Control knob towards up or  
down.  
Press the [ENTER].  
Press the [ ] button.  
5 Select the character to be searched for  
Operation type  
Operation  
Selection of item  
Return to previous item  
Select the characters  
Turn the Control knob.  
Move the cursor to the enter Push the Control knob towards up or  
character position down.  
Cancelling the Music Search mode  
Press the [ ] button for at least 1 second.  
6 Determine the selected character  
Press the [ENTER] button.  
Start search. When search is completed, the music  
search mode is selected again at the selected  
character position.  
Set the ratio with 32 Skip Search in <Function setting>  
Keep pushing Control knob for 3 seconds or longer skips  
songs at 10% regardless of the setting.  
Cancelling the Music Search mode  
Press the [  
] button for at least 1 second.  
The time of Alphabet search may become long depending  
on the number of items (songs) in iPod.  
To search for a character other than A to Z and 1 to 9, enter  
“*.  
If the first character string begins with an article “a, an,  
or “the” in the alphabet search mode, it is searched for in  
defiance of the article.  
|
10 KDC-BT50U/ KDC-5047U/ KMR-440U  
 
Function of iPod source  
Function of iPod source  
Direct Search  
Related Search  
Searching for music by selecting a browse item and  
an alphabetic character(s).  
Browsing for music of the same artist or genre as  
the one being played.  
1 Enter Music Search mode  
Press the [ ] button.  
1 Enter Music Search mode  
Press the [ ] button.  
“MUSICSEARCH” is displayed.  
“MUSICSEARCH” is displayed.  
2 Enter Search select mode  
Press the [ ] button.  
2 Enter Search select mode  
Press the [ ] button.  
3 Select Direct Search mode  
3 Select Related Search mode  
Turn the Control knob to select “Direct Search,  
and then press the [ENTER] button.  
Turn the Control knob to select “Related  
Search, and then press the [ENTER] button.  
“Related Search” is displayed.  
4 Select browse item  
Turn the Control knob to select browse item,  
and then press the [ENTER] button.  
4 Select browsing item  
Turn the Control knob and press the [ENTER]  
button when the desired browse item is  
selected.  
Display  
Browses item  
Playlists  
Display  
Browses music  
Artists  
“Search Artist”  
“Search Album”  
Displays the album of the same artist.  
Displays music in the album in which the one  
being played is included.  
Albums  
Songs  
“Search Genre”  
Displays the artist of the same genre.  
“Search Composer” Displays the album including music created by the  
same composer.  
Podcasts  
Genres  
5 Search for music  
Composers  
Operation type  
Operation  
Movement between items Turn the Control knob.  
5 Select the character to be searched for  
Turn the Control knob to select character, and  
then press the [ENTER] button.  
Selection of item  
Press the [ENTER] button.  
Return to previous item  
Push the Control knob towards up.  
You can select up to three characters.  
Cancelling the Related Search  
Press the [ ] button for at least 1 second.  
6 Search for music  
Turn the Control knob to select ”DONE, and  
then press the [ENTER] button.  
A search result list is displayed.  
Related search cannot be performed while playing a  
Podcast.  
7 Select the music  
Turn the Control knob to select music, and then  
press the [ENTER] button.  
When the music being played has no information on  
browsing items or no music was found, “Not Found” is  
displayed.  
Cancelling the Music Search mode  
Press the [  
] button for at least 1 second.  
English  
|
11  
Music disc/Audio file Operation  
Function of iPod source  
3 Turn the Control knob to select “One” or “All,  
and then press the [ENTER] button.  
Selecting “All” deletes all songs.  
My Playlist for iPod  
You can register your favorite songs to make a  
playlist. You can register up to ten songs in the  
playlist.  
4 Turn the Control knob to select “YES, and then  
press the [ENTER] button.  
“Completed” is displayed.  
Registering a song in the playlist  
1 Play the song you want to register  
Push the Control knob towards up, down, right,  
and left.  
All songs in the playlist can also be deleted by selecting 33  
2 Register the song  
Press the [ENTER] button for at least 2 seconds.  
“## (registration number) Stored” is displayed. You  
can register up to ten songs.  
Function of KDC-5047U/ KMR-440U with disc  
changers  
Basic Operation of Disc Changer  
(Optional)  
When creating a playlist, you can register the songs stored  
in one iPod. If you attempt to register a song by connecting  
an unregistered iPod, “My Playlist Delete” is displayed.  
Selecting “YES” deletes the playlist.  
Selecting CD changer source  
Press the [SRC] button.  
Select the “CD CH” display.  
For how to select source item, refer to <Power and  
The song displayed during music search can be registered  
in the same manner. For the music search procedure, refer  
If you attempt to register the eleventh song, “Memory Full”  
is displayed and you cannot register the song. To register it,  
delete an unnecessary song.  
Music search  
Push the Control knob towards right or left.  
Do not register Podcasts. Songs may be registered or played  
improperly. For example, unintended songs are registered.  
Disc Search  
Push the Control knob towards up or down.  
Playing the playlist  
1 Display the playlist  
Press the [ENTER] button.  
“My Playlist” is displayed.  
2 Play a song in the playlist  
Turn the Control knob to select the song you  
want to play and then press the [ENTER] button.  
“LIST” indicator is displayed.  
To stop playing the song in the playlist, turn the power off.  
If a song does not end with 1 second or longer silence, its  
last portion may not be played.  
Songs cannot be played at random during playback of the  
songs in playlist.  
Deleting a song from the playlist  
1 Display the playlist  
Press the [ENTER] button.  
“My Playlist” is displayed.  
2 Turn the Control knob to select the song you  
want to delete and then press the [ENTER]  
button for at least 2 seconds.  
|
12 KDC-BT50U/ KDC-5047U/ KMR-440U  
Tuner Operation  
Station Preset Memory  
Preset Tuning  
Putting a station in the memory.  
Recalling the stations in the memory.  
1 Select the frequency to put in the memory  
Push the Control knob towards right or left.  
1 Enter Preset Tuning mode  
Press the [ ] button.  
2 Enter Preset Memory mode  
2 Recall the station  
Press the [ ] button.  
Turn the Control knob to select recall number  
(“P1” – “P6”), and then press the [ENTER].  
3 Preset the station  
Turn the Control knob to select preset number  
(“P1” – “P6”), and then press the [ENTER] button  
for at least 2 seconds.  
Cancelling Preset Tuning  
Press the [  
] button.  
Cancelling the Preset Memory mode  
Press the [  
] button.  
English  
|
13  
Tuner Operation  
PTY (Program Type)  
Program Type Preset  
Selecting the Program Type below and searching  
for a station;  
Putting the Program Type in the Preset button  
memory and quick recall.  
Program Type Display  
Program Type Display  
Serious Classical “Classics”  
Presetting the Program Type  
1 Select the Program Type to preset  
Speech  
Music  
News  
“Speech”  
“Music”  
“News”  
Other Music  
Weather  
Finance  
“Other M”  
“Weather”  
“Finance”  
2 Enter Program Type Preset mode  
Press the [ ] button.  
Current Affairs  
Information  
Sport  
“Affairs”  
“Info”  
“Sport”  
Children’s programs “Children”  
Social Affairs  
Religion  
Phone In  
“Social”  
3 Preset the Program Type  
Education  
Drama  
Culture  
Science  
Varied  
Pop Music  
Rock Music  
Easy Listening  
Music  
“Educate”  
“Drama”  
“Culture”  
“Science”  
“Varied”  
“Pop M”  
“Rock M”  
“Easy M”  
“Religion”  
“Phone In”  
“Travel”  
Turn the Control knob to select preset number  
(“P1” – “P6”), and then press the [ENTER] button  
for at least 1 second.  
Travel  
Leisure  
“Leisure”  
“Jazz”  
“Country”  
“Nation M”  
“Oldies”  
Jazz Music  
Country Music  
National Music  
Oldies Music  
Folk Music  
Documentary  
Recalling the preset Program Type  
1 Enter PTY mode  
Press the [ ] button twice.  
“Folk M”  
“Document”  
2 Enter Program Type Preset mode  
Press the [ ] button.  
Light Classical  
“Light M”  
Speech and Music include the Program type shown below.  
Music: Black character item.  
Speech: White character item.  
3 Recall the Program Type  
Turn the Control knob to select recall number  
(“P1” – “P6”), and then press the [ENTER]  
button.  
1 Enter PTY mode  
Press the [ ] button twice.  
2 Select the Program Type  
Turn the Control knob.  
Changing Language for PTY Function  
3 Search for the selected Program Type station  
Push the Control knob towards right or left.  
Selecting the Program Type display language as  
follows;  
4 Exit PTY mode  
Press the [  
] button.  
Language  
English  
French  
Display  
“English”  
“French”  
“German”  
This function cannot be used during a traffic bulletin or AM  
reception.  
German  
When the selected Program Type is not found, “No PTY” is  
displayed. Select another Program Type.  
1 Enter PTY mode  
Press the [ ] button twice.  
2 Enter Changing Language mode  
Press the [ENTER] button.  
3 Select the language  
Turn the Control knob to select language, and  
then press the [ENTER].  
|
14 KDC-BT50U/ KDC-5047U/ KMR-440U  
 
Favorite Control  
Favorite Preset Memory  
Favorite Preset Recall  
You can register frequently used items such as  
broadcast stations, iPod Playlist or Artists, Function  
setting items, or Audio control items.  
Retrieving an item registered to Favorite.  
1 Enter Favorite Preset Recall mode  
Press the [FAVORITE] button.  
1 Display the item you want to register  
2 Select the number to recall in the Favorite  
memory  
Turn the Control knob.  
Registerable items are as follows:  
Source  
TUNER  
Registerable items  
Frequency  
3 Recall the Favorite Preset  
Press the [ENTER] button.  
iPod  
Browse item such as Playlists/Artists/Albums  
Function setting item  
Audio control item  
Display control item  
Telephone number retrieval.  
Function setting  
Audio control*  
Display control*  
Hands-free phone  
Cancelling the Favorite Preset Recall mode  
Press the [  
] button.  
* Function of KDC-5047U/ KMR-440U  
(For the KDC-BT50U, Audio control item and Display control  
item are contained in Function setting.)  
Deleting Favorite Preset Memory  
When selecting registerable items, the “  
indicator is lit for 5 seconds.  
FAV  
Deleting an item registered to Favorite.  
1 Select Standby  
Press the [SRC] button.  
Go through step 2 and later by the item which the  
” indicator is lit.  
FAV  
Select the “STANDBY” display.  
For how to select source item, refer to <Power and  
When a setting operation of each item can be  
done in the Function setting, the “ ” indicator  
goes out and you cannot register to the Favorite.  
FAV  
2 Enter Function setting mode  
2 Enter Favorite Preset Memory mode  
Press the [FAVORITE] button for at least 1  
second.  
Press the [FNC] button.  
3 Select Favorite Delete mode  
The item can be selected and determined as  
follows.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
3 Select the number to put in the memory  
Turn the Control knob.  
4 Put the Favorite Preset in the memory  
Press the [ENTER] button.  
Cancelling the Favorite Preset Memory mode  
4 Select the number you want to delete  
Turn the Control knob to select memory  
number, and then press the [ENTER] button.  
“Favorite Delete” is displayed.  
Press the [  
] button.  
Register 6 pairs of Favorite Preset Memory.  
“Register your favorite functions” is displayed for numbers  
available for preset.  
Select “All” if you want to delete all.  
5 Turn the Control knob to select “YES, and then  
press the [ENTER] button.  
“Completed” is displayed.  
The memory cannot be erased by the Reset button.  
Registering the operation procedure to an existing preset  
number overwrites the existing procedure.  
The registered item can be deleted by selecting 43 Favorite  
6 Exit Function setting mode  
Press the [  
] button for at least 1 second.  
If the items in the second or lower hierarchy are changed,  
the list in iPod will be changed by adding or deleting  
songs after the FAVORITE registration. Due to this, the list  
registered in this unit will be different from the list in iPod.  
The FAVORITE registration should be performed again after  
editing the items in iPod.  
To use this function, this unit must be powered for more  
than one hour.  
English  
|
15  
 
Function setting  
Configure the functions of this unit using the  
following procedure:  
Function item  
Example:  
1 Search for the item to set  
Pick up the item to set according to <Function  
No. Function name: “Display of each function on  
this unit” “Setting value 1”*, “Setting value 2...  
Provides a functional overview of the function  
item. The source that displays this function can be  
found according to the numbers (00) in <Function  
2 Select the source  
Press the [SRC] button.  
Switch to the source that displays the item to set  
according to <Function list> (page 20).  
For how to select source item, refer to <Power and  
The underscored setting value is a factory setting.  
3 Enter Function setting mode  
Music Play Mode  
Press the [FNC] button.  
 01  iPod Control by Hand: “Hands Mode” “ON,  
“OFF”  
When set to “ON”, allows you to operate iPod with  
the control on the iPod.  
file) “ON, OFF”  
When set to “ON”, plays the intro of the music in  
the disc/folder successively.  
Random” (Audio file/ iPod) “ON, OFF”  
When set to “ON”, plays the music in the disc/  
folder randomly.  
 04  All Random play: “All Random” “ON, OFF”  
When set to “ON”, all songs in iPod are played at  
random.  
4 Select the Function item  
Turn the Control knob to select the item to set.  
5 Enter the selected Function item  
Press the [ENTER] button.  
Press the [  
item.  
] button to return to the previous  
Repeat steps 4 and 5 until you get to the item to  
set.  
6 Set the Function item  
Turn the Control knob to select a desired  
setting value.  
7 Determine the setting value  
Press the [ENTER] button.  
 05  Track/File Repeat play: “Track Repeat” (CD)/  
“File Repeat” (Audio file/ iPod) “ON, OFF”  
When set to “ON”, plays the music repeatedly.  
 06  Disc/Folder Repeat: “Disc Repeat” (CD  
”OFF”  
The previous item is displayed.  
8 Exit Function setting mode  
Press the [  
] button for at least 1 second.  
When set to “ON”, plays the music in the disc/  
folder repeatedly.  
 07  Magazine Random: “MGZN Random” “ON,  
”OFF”  
When set to “ON”, plays the music in the disc  
changer randomly.  
Function of KDC-5047U/ KMR-440U.  
|
16 KDC-BT50U/ KDC-5047U/ KMR-440U  
                 
Display Control  
Display & Illumination Settings  
 08  Display Type Selection: “Display Control” 5  
 16  Faceplate Color Settting: “Color SEL”  
Sets the faceplate illumination color. Refer to  
Function of KDC-BT50U/ KDC-5047U.  
 17  Display ON/OFF: “DISP OFF Mode” “ON,  
“OFF”  
types  
Sets the display pattern.  
Display type  
Type A  
Type B  
Display information  
Displays 2 lines of text.  
Displays a line of text.  
Displays the status.  
Type C  
If this unit is not operated at least 5 seconds with  
“ON” selected, the display turns off. During a  
setup mode, the display will not turn off even if 5  
seconds lapse.  
Type D  
Displays the clock.  
Type E  
Displays the spectrum analyzer.  
 09  Display Side Selection: “DISP Side Select” ➤  
2 types  
Sets the Type A, B, D, and E side display to ON/  
 10  Display Text Selection: “DISP Text Select”  
Sets the Type A and B text display. Refer to  
Function of KDC-BT50U/ KDC-5047U.  
 18  Display Dimmer: “Display Dimmer” “Auto,  
“Manual1, Manual2, OFF”  
Dims the display part in conjunction with the light  
switch of the vehicle.  
 19  Text Scroll: Text Scroll” “Auto, Manual”  
Setting to “Auto” scrolls the displayed text  
automatically.  
 11  Display Graphic Selection: “DISP GRPHC  
Select” 6 types  
 20  Display Bluetooth device Status: “BT DVC  
Sets the Type E spectrum analyzer display. Refer to  
You can display the connection status, signal  
strength, and battery level.  
: Battery level of cell-phone.  
: Signal strength of cell-phone.  
Function of KDC-BT50U/ KCA-BT200 (Optional  
Accessory).  
Clock & Date Settings  
 12  Adjusting the Clock: “Clock Adjust”  
Sets the clock.  
1. Turn the Control knob to adjust the hour, and  
then press the [ENTER] button.  
2. Turn the Control knob to adjust the minute, and  
then press the [ENTER] button.  
 21  Illumination Dimmer: “ILLUMI Dimmer” ➤  
“Auto, Manual1, Manual2, OFF”  
Reduces the key Illumination brightness.  
Auto: Dims the illumination in conjunction with  
the Light switch of the vehicle.  
You can do this adjustment when 13  
Synchronizing the Time is set to “OFF”.  
 13  Synchronizing the Time: “Time Synchronized”  
“ON, OFF”  
Synchronizing the RDS station time data and this  
unit’s clock.  
 14  Adjusting the Date: “Date Adjust”  
Sets the date. Refer to <Adjusting the Date>  
Manual1: Dims the illumination constantly.  
Manual2: Dims the illumination darker than  
Manual1.  
OFF: Does not dim the illumination.  
 22  Illumination Effect: “ILLUMI Effect” “ON,  
”OFF”  
Sets whether the key illumination color is  
changed in conjunction with the key operation.  
 23  Music-linked Illumination Effect: “ILLUMI Music  
SYNC” “ON, OFF”  
 15  Selecting Date Mode: “Date Mode” 7 types  
Sets the date display mode. Refer to <Adjusting  
Sets whether the key illumination color is  
changed in conjunction with the sound volume.  
English  
|
17  
                               
Function setting  
Tuner Settings  
iPod Settings  
 24  Local Seek: “Local Seek” “ON, OFF”  
Only stations whose reception is good are  
searched in auto seek tuning.  
 25  Seek Mode: “Seek Mode” “Auto1, ”Auto2,  
”Manual”  
 32  Skip Search: “Skip Search” “0.5%, 1%, 5%,  
“10%”  
Sets the ratio of skip performed with <Skip  
 33  My Playlist Delete: “My Playlist Delete”  
Deletes the songs registered in My Playlist.  
Turn the Control knob to select “YES” and then  
press the [ENTER] button to delete My Playlist.  
Selects the tuning mode of the radio.  
Tuning mode  
Display Operation  
Auto seek  
“Auto1” Automatic search for a station.  
Preset station seek “Auto2” Search in order of the stations in  
the Preset memory.  
AUX Settings  
Manual  
“Manual” Normal manual tuning control.  
 34  Name Set: “Name Set” “AUX, DVD,  
“PORTABLE, GAME, VIDEO, TV”  
 26  Auto Memory: “Auto Memory”  
Memorizes six stations with good reception  
automatically.  
Sets the display when switched to AUX source.  
Turn the Control knob to select “YES” and then  
press the [ENTER] button to start the auto  
memory operation.  
Audio Settings  
 35  Audio Control: “Audio Control”  
Sets the sound quality and speaker system. Refer  
 27  Monaural reception: “MONO” “ON, OFF”  
You can reduce the noise when stereo broadcasts  
are received as monaural.  
Function of the KDC-BT50U.  
 28  News Bulletin with Timeout Setting: “News  
Interrupt” “OFF, 00MIN” – “90MIN”  
Automatically receives news bulletin when it  
starts. Set the time during which interrupt is to be  
disabled after start of another news bulletin.  
Changing “00MIN” to “90MIN” turns this function  
ON.  
Initial Settings  
 36  Source Select Mode: “SRC Select” “1, 2”  
Sets the source selection method.  
 37  Beep: “Key Beep” “ON, OFF”  
Setting the operation check sound (beep sound)  
ON/OFF.  
If news bulletin starts when this function is  
ON, “NEWS” is displayed and news is received.  
If “20MIN” is has been set, reception of another  
news bulletin will not start for 20 minutes.  
The news bulletin volume is the same level that  
was set for Traffic Information.  
 38  Russian language setting: “Russian” “ON,  
“OFF”  
When this is set to ON, the following character  
strings are displayed in Russian:  
Folder name/ File name/ Song title/ Artist name/  
Album name/ KCA-BT200 (optional accessory)  
 39  Function setting display language: “Function  
Language” “English, French, Spanish,  
“German, Italian, Russian”  
 29  Alternatove Frequency: “AF” “ON, OFF”  
When the reception is poor, automatically  
alternate to another frequency broadcasting the  
same program in the same RDS network with  
better reception.  
Changes the display language of items in  
Function setting.  
 30  RDS Regional: “RDS Regional” “ON, OFF”  
Sets whether to switch to the station only in the  
specific region using the “AF SET” control.  
 31  Auto TP Seek: “Auto TP Seek” “ON, OFF”  
When traffic information station reception is poor,  
automatically searches for a station that can be  
received better.  
 40  Power OFF timer : “Power OFF Wait” “OFF,  
“20MIN, 40MIN, 60MIN”  
Setting the timer to turn this unit’s power OFF  
automatically when Standby mode continues.  
Using this setting can save the vehicle’s battery  
power.  
OFF: Power OFF Timer function is OFF.  
20MIN: Turns the power OFF after 20 minutes.  
(Factory setting)  
40MIN: Turns the power OFF after 40 minutes.  
|
18 KDC-BT50U/ KDC-5047U/ KMR-440U  
                             
60MIN: Turns the power OFF after 60 minutes.  
Function of the KDC-BT50U/ KDC-5047U.  
 41  Built in AUX: “Built-in AUX” “ON, OFF”  
Sets whether to display AUX during source  
selection.  
Function of KDC-BT50U/ KCA-BT200 (Optional  
Accessory)  
Bluetooth Settings  
 48  Phone Selection: “Phone Selection”  
Select a cell-phone subject to hands-free  
connection. Refer to <Selecting the Bluetooth  
 49  Audio Selection: “Audio Selection”  
Select the Bluetooth audio player to be  
connected. Refer to <Selecting the Bluetooth  
 50  SMS Download: “SMS Download”  
Download a short message. Refer to  
 42  CD Read: “CD Read” “1, 2”  
Sets the method for reading CD.  
When unable to play special format CD, set this  
function to “2” to force playing. Note that some  
music CDs may be unplayable even when set to  
“2”.  
In addition, audio files cannot be played when set  
to “2”. Normally, keep this set to “1”.  
1 : Automatically distinguishes between audio file  
disc and music CD when playing disc.  
2 : Forces playing as music CD.  
 51  SMS Inbox display: “SMS Inbox”  
Display the received short message. Refer to  
Function of KCA-BT200 (Optional Accessory).  
 52  Adding a voice command: “PB Name Edit”  
Registers voice for voice recognition. Refer to  
Function of KCA-BT200 (Optional Accessory).  
 53  Voice command category setting: “PN Type  
 43  Favorite Delete: “Favorite Delete” Preset No.,  
All”  
Deletes Favorite Preset Memory.  
 44  Built in Amp setting: “Built-in AMP” “ON,  
“OFF”  
Selecting “OFF” turns off the built-in amplifier.  
Turning off the built-in amplifier improves the  
quality of the sound from Preout.  
 45  Speaker Select: “Speaker Select” “OFF,  
”5/4inch, 6x9/6inch, O.E.M”  
Registers voice to select the Phone number  
category in Phonebook. Refer to <Setting a Voice  
Function of KCA-BT200 (Optional Accessory).  
 54  Device Regist: “Device Regist.”  
Fine-tuning so that the System Q value is optimal  
when setting the speaker type as follows;  
Register a Bluetooth device (pairing). Refer to  
 55  Special Device Regist: “SPCL DVC Select”  
Allow registration of a special device that cannot  
be registered normally. Refer to <Registering  
Speaker type  
OFF  
Display  
“OFF”  
For 5 & 4 in. speaker  
For 6 & 6x9 in. speaker  
For the OEM speaker  
“5/4inch”  
“6x9/6inch”  
“O.E.M”  
 56  Device Delete: “Device Delete”  
 46  Firmware Upgrade: “F/W Update #.##” “USB,  
”CD”  
Cancel registration of the Bluetooth device. Refer  
Upgrades the firmware.  
Selecting “YES” and then pressing [ENTER] button  
starts upgrading the firmware.  
For how to update the firmware, access our web  
site.  
 57  PIN Code Edit: “PIN Code Edit”  
Specify the PIN code required when registering  
this unit using the Bluetooth device. Refer to  
Demo Mode Settings  
 47  Demo Mode: “DEMO Mode” “ON, OFF”  
Specifies whether to enable demonstration.  
English  
|
19  
                                 
Function setting  
 58  Setting the Time Interval for Automatic  
Answer: “Auto Answer” ”OFF, 0SEC” – “8SEC”  
– “99SEC”  
Function list  
Function items that appear when any  
source is selected  
This function automatically answers (responds  
to) a call after lapse of the preset time interval for  
automatic answer.  
“OFF” : Does not answer the phone call  
automatically.  
Function item list  
No.  
“Settings”  
“Clock & Date”  
“Clock Adjust”  
“Time Synchronized”  
“Date Adjust”  
“0” : Automatically answers the phone call at once.  
“1s” – “99s” : Automatically answers the phone call  
after lapse of 1 – 99 seconds.  
“Date Mode”  
“Color SEL”  
“DISP & ILLUMI”  
“DISP OFF Mode”  
“Display Dimmer”  
“Text Scroll”  
“BT DVC Status”  
“ILLUMI Dimmer”  
“ILLUMI Effect”  
“ILLUMI Music SYNC”  
 59  Speaker Select: “Bluetooth HF/Audio” “Front,  
All”  
You can specify output speakers for hands-free  
voice communication and Bluetooth audio sound.  
“Front” : Outputs sound from the front speakers.  
“All” : Outputs sound from the front and rear  
speakers.  
“Display Control” (“DISP SELECT”)  
“DEMO Mode”  
“DISP Side Select”  
“DISP Text Select”  
“DISP GRPHC Select”  
 60  Setting the Beep of the Incoming Call: “Call  
Beep” “ON, OFF”  
You can output a beep from the speaker when a  
call comes in.  
“ON” : Beep is heard.  
Function items that appear during  
standby  
“OFF” : Beep is canceled.  
 61  BT F/W Update: “BT F/W Update”  
Displays the firmware version and update the  
firmware. Refer to <Displaying the Firmware  
 62  MIC Gain: “MIC Gain” “-3” – ”0” – “+3”  
Adjusts the sensitivity of the built-in microphone  
for a telephone call. Adjust the voice of caller.  
Setting to “+” increases the voice volume.  
Function of the KDC-BT50U.  
 63  Noise Cancel: “NR Level” “-3” – ”0” – “+3”  
Reduces the noises generated by surrounding  
environment without changing the built-in  
microphone volume. Adjust the voice of caller  
when it is not clear. Setting to “+” increases the  
noise reduction.  
Function item list  
“Initial Settings” “SRC Select”  
“Key Beep”  
No.  
“Russian”  
“Function Language”  
“Power OFF Wait”  
“Built-in AUX”  
“CD Read”  
“Favorite Delete”  
“Built-in AMP”  
“Speaker Select”  
“F/W Update #.##”  
Function of the KDC-BT50U.  
 64  Echo Cancel Level: “Echo Cancel” “-2” – ”0”  
– “+2”  
Sets the echo cancellation level.  
Function of the KDC-BT50U.  
 65  MIC Select: “MIC Select” “Builtin, External”  
Determines whether the built-in or external  
microphone is to be used when the receiver  
incorporates a microphone.  
Builtin: Use the built-in microphone.  
External: Use the external microphone.  
Function of the KDC-BT50U.  
|
20 KDC-BT50U/ KDC-5047U/ KMR-440U  
                                                                               
Function items that appear during  
playback of a CD, audio file, or iPod  
Function items that appear in the BT  
mode  
Function item list  
“Audio Control”  
No.  
Function item list  
No.  
“Settings”  
“Phone Selection”  
“Audio Selection”  
“SMS Download”  
“SMS Inbox”  
“Play Mode”  
“Hands Mode”(iPod)  
“Track Scan(CD)/“File Scan”(Audio file)  
“Disc Random”(CD)/“Folder Random”(Audio  
file/ iPod)  
“All Random”(iPod)  
“Track Repeat”(CD)/“File Repeat”(Audio  
file/ iPod)  
“Voice Tag”  
“PB Name Edit”  
“PN Type Edit”  
“Device Regist.”  
“SPCL DVC Select”  
“Device Delete”  
“PIN Code Edit”  
“Auto Answer”  
“Bluetooth HF/  
Audio”  
“Call Beep”  
“BT F/W Update”  
“MIC Gain”  
“NR Level”  
“Echo Cancel”  
“MIC Select”  
“Detailed Settings”  
“Disc Repeat”(CD changer)/“Folder Repeat”  
(Audio file)  
“MGZN Random”(Disc changer)  
“Skip Search”(iPod/ Music Editor media)  
“My Playlist Delete”(iPod)  
“News Interrupt”  
“Settings”  
“RDS Settings”  
“AF”  
“RDS Regional”  
“Auto TP Seek”  
Function items that appear when the  
tuner source is selected  
Function item list  
“Audio Control”  
No.  
The Bluetooth Function setting items can be set while in  
the Bluetooth mode without selecting the Function setting  
mode.  
“Settings”  
“Local Seek”(FM)  
“Seek Mode”  
“Auto Memory”  
“MONO”(FM)  
“News Interrupt”  
“AF(FM)  
“RDS Regional”(FM)  
“Auto TP Seek”(FM)  
1. Press the [  
] button ( KDC-BT50U )/ [FNC] button for  
at least 1 second ( KDC-5047U KMR-440U ) to enter the  
Bluetooth mode.  
2. Turn the Control knob to select “BT Setting, and then  
press the [ENTER] button.  
3. Turn the Control knob to select desired item, and then  
press the [ENTER] button.  
4. Turn the Control knob to select value, and then press the  
[ENTER] button.  
Function items that appear when the  
AUX source is selected  
Function item list  
“Audio Control”  
No.  
“Settings”  
“RDS Settings”  
“Name Set”  
“News Interrupt”  
“AF”  
“RDS Regional”  
“Auto TP Seek”  
English  
|
21  
                                                                   
Display Settings  
Selecting Display Type  
Selecting Text Display  
Shown below are examples of display types.  
Changes displayed information on each of the  
following sources:  
Display  
Type A  
Type B  
Type C  
Type D  
Type E  
Display Type  
Displays 2 lines of text.  
Displays a line of text.  
Displays the status (ON/OFF indicator for each function).  
Displays the clock.  
In Tuner source  
Information  
Display  
Frequency & Program Service name (FM)  
Title & Artist name* (FM)  
Station name* (FM)  
“Frequency/PS”  
“Title/Artist”  
“Station Name”  
“Radio Text Plus”  
“Radio Text”  
“Frequency”  
“Speana/Clock”  
“Date”  
Displays the spectrum analyzer.  
Radio text plus* (FM)  
1 Enter Display control mode  
KDC-5047U KMR-440U  
Radio text (FM)  
*
Frequency (MW, LW)  
Spectrum analyzer & Clock  
Date  
Press the [DISP] button.  
KDC-BT50U  
1) Press the [FNC] button.  
2) Turn the Control knob to select “Display  
Control, and then press the [ENTER] button.  
Displays the status (Type A display only)  
Blank  
“Indicator”  
“Blank”  
*Information of Radio text plus is displayed.  
2 Select Display type  
Turn the Control knob to select Display type,  
and then press the [ENTER] button.  
In CD & External disc source  
Information  
Disc title  
Display  
“Disc Title”  
“Track Title”  
“P-Time”  
“Speana/Clock”  
“Date”  
Track title  
Play time  
Spectrum analyzer & Clock  
Date  
3 Select Display information item  
Turn the Control knob to select Display  
information item, and then press the [ENTER]  
button.  
Displays the status (Type A display only)  
Blank  
“Indicator”  
“Blank”  
The following display information items can be set:  
• Side display selection (When selecting Display  
type A, B, D, or E.)  
Select the “DISP Side Select” display.  
• Text display selection (When selecting Display  
type A or B.)  
Select the “DISP Text Select” display.  
• Graphic selection (When selecting Display type  
E.)  
In Audio file/ iPod source  
Information  
Title & Artist name  
Album & Artist name  
Folder name  
Display  
“Title/Artist”  
“Album/Artist”  
“Folder Name”  
“File Name”  
“P-Time”  
“Speana/Clock”  
“Date”  
“Indicator”  
“Blank”  
File name  
Play time  
Spectrum analyzer & Clock  
Date  
Displays the status (Type A display only)  
Blank  
Select the “DISP GRPHC Select” display.  
In Bluetooth Audio “BT Audio” (KDC-BT50U)/  
“BT Audio EXT” (KCA-BT200; Optional  
accessory) source  
4 Exit Function setting mode  
Press the [  
] button for at least 1 second.  
Information  
Display  
Source name  
“Source Name”  
“Title/Artist”  
“Album/Artist”  
“Speana/Clock”  
“Date”  
Title & Artist name (KDC-BT50U only)  
Album & Artist name (KDC-BT50U only)  
Spectrum analyzer & Clock  
Date  
Displays the status (Type A display only)  
Blank  
“Indicator”  
“Blank”  
|
22 KDC-BT50U/ KDC-5047U/ KMR-440U  
   
In Standby/ Auxiliary input source  
Function of KDC-BT50U/ KDC-5047U  
Information  
Source name  
Spectrum analyzer & Clock (AUX only)  
Clock (Standby only)  
Display  
Illumination Color Selection  
“Source Name”  
“Speana/Clock”  
“Clock”  
“Date”  
“Indicator”  
“Blank”  
Selecting the Illumination Color of the panel.  
1 Enter Function setting mode  
Press the [FNC] button.  
Date  
Displays the status (Type A display only)  
Blank  
2 Select Color select mode  
The item can be selected and determined as  
follows.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
1 Enter Display control mode  
KDC-5047U KMR-440U  
Press the [DISP] button.  
KDC-BT50U  
1) Press the [FNC] button.  
2) Turn the Control knob to select “Display  
Control, and then press the [ENTER] button.  
3 Select the part where you want to set the  
Illumination Color  
Part  
All  
Display  
“All”  
2 Select the Display type  
Turn the Control knob to select Display type A  
or B, and then press the [ENTER] button.  
Button  
“Key”  
Control knob  
USB/ Auxiliary Terminal  
“Rotary”  
“USB & AUX”  
3 Select Text display selection mode  
Turn the Control knob to select “DISP Text  
Select, and then press the [ENTER] button.  
Turn the Control knob to select part, and then  
press the [ENTER] button.  
4 Select the text display part (Display type A  
only)  
Push the Control knob towards up or down.  
The selected text display part blinks.  
4 Select the Illumination Color  
Turn the Control knob to select color, and then  
press the [ENTER] button.  
Select the color from “Variable Scan”/ “Color1” —  
“Color 24.  
5 Select the text  
Turn the Control knob.  
5 Exit Function setting mode  
Press the [  
] button for at least 1 second.  
6 Exit Function setting mode  
Press the [  
] button for at least 1 second.  
If the selected display item does not have any information,  
alternative information is displayed.  
Some items cannot be selected depending on the display  
type and row.  
When selecting “Folder name” while playing with iPod,  
names will be displayed depending on currently selected  
browsing items.  
If the iPod Control by Hand Mode is set to on while playing  
the iPod, “iPod By Hand Mode” is displayed.  
If all characters cannot be displayed while playing with iPod,  
the file number in the list is displayed.  
Information  
Music title  
Folder name  
File name  
Display  
“TITLE***”  
“FLD***”  
“FILE***”  
English  
|
23  
 
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)  
Operation of hands-free phoning  
Before Use  
• For details on the Bluetooth cell-phone with the  
hands-free function, see <About the Cell-Phone>  
• You need to register your cell-phone before using  
it with this unit. For more details, see <Registering  
4 Search for the Name  
Press the [ENTER] button.  
5 Select the phone number  
Turn the Control knob.  
Pushing the Control knob towards right or left sorts  
the Phone Book by name  
6 Make a call  
• If you have registered two or more cell-phones,  
you need to select one of them. For more details,  
• To use the Phone Book, it must be downloaded to  
this unit in advance. For details, see <Downloading  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [ENTER] button.  
The display changes in name, telephone number, and time-  
stamp whenever pressing the [ENTER] button. ( KDC-BT50U )  
During search, a non-accent character such as “u” is  
searched for instead of an accent character such as “ü.  
Receiving a call  
Answering a Phone Call  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [ENTER] button.  
Dialing a number  
1 Enter Bluetooth mode  
KDC-BT50U  
The following operations disconnect the line:  
- Insering a CD.  
Press the [ ] button.  
KDC-5047U KMR-440U  
- Connecting a USB device.  
The name of the calling party is displayed if it has already  
been registered in the Phone Book.  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
Rejecting an Incoming Call  
2 Select the Number dial mode  
Turn the Control knob to select “Number Dial,  
and then press the [ENTER] button.  
KDC-BT50U  
Press the [  
KDC-5047U KMR-440U  
] button.  
Press the [SRC] button.  
3 Enter a phone number  
Turn the Control knob to select number, and  
then Push the Control knob towards right.  
Calling a number in the Phone Book  
4 Make a call  
1 Enter Bluetooth mode  
KDC-BT50U  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [ENTER] button.  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
To erase the entered phone number digit by  
digit:  
Push the Control knob towards left.  
2 Select the Name search mode  
Turn the Control knob to select “Name Search,  
and then press the [ENTER] button.  
You can input a maximum of 32 digits.  
3 Enter the initial of name  
Operation type  
Operation  
Select the characters.  
Move the character page.  
Turn the Control knob.  
Push the Control knob towards up or  
down.  
|
24 KDC-BT50U/ KDC-5047U/ KMR-440U  
 
KDC-5047U KMR-440U  
Calling a number in the call log  
Press the [ENTER] button.  
1 Enter Bluetooth mode  
KDC-BT50U  
You need to register the preset dial number. Refer to  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
Registering to the Preset Dial Number  
List  
2 Select the call log mode  
Turn the Control knob to select “Incoming  
Calls, Outgoing Calls, or “Missed Calls, and  
then press the [ENTER] button.  
“Incoming Calls: Incoming calls  
1 Enter the phone number you wish to register  
Enter the phone number with reference to the  
following:  
Dialing a number/ Calling a number in the call log/  
Calling a number in the Phone Book  
“Outgoing Calls: Outgoing calls  
“Missed Calls: Missed calls  
3 Select a name or phone number  
Turn the Control knob.  
2 Enter Preset Memory mode  
Press the [ ] button.  
4 Make a call  
3 Select a number and store it in the memory  
Turn the Control knob to select memory  
number (“P1” – “P6”), and then press the  
[ENTER] button for at least 2 second.  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [ENTER] button.  
Cancelling the Preset Memory mode  
Press the [  
] button.  
The display changes in name, telephone number, and time-  
stamp whenever pressing the [ENTER] button. ( KDC-BT50U )  
The outgoing call list, the incoming call list, and the missed  
call list, are the lists of calls originated from and received  
at this unit. They are not the ones stored in the cell-phone  
memory.  
During a call  
Disconnecting a Call  
Press the [SRC] button.  
Switching to the Private Mode  
Push the Control knob towards right or left.  
Switches between Private talk (“PRIVATE”) and  
Hands-free talk each time this button is pressed.  
Speed dialing (Preset dial)  
1 Enter Bluetooth mode  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Depending on the type of your cell-phone, switching  
to the private talk mode may select the source that was  
used before commencing the hands-free connection. If  
this happens, the source cannot be switched back to the  
hands-free talk mode by operating this unit. Operate your  
cell-phone to return to the hands-free talk mode.  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
2 Select the number you want to recall from the  
memory  
Turn the Control knob to select recall number  
(“P1” – “P6”), and then press the [ENTER]  
button.  
Adjusting the Voice Volume during a Call  
Turn the Control knob.  
3 Make a call  
KDC-BT50U  
Press the [ ] button.  
English  
|
25  
 
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)  
Operation of hands-free phoning  
Function of KCA-BT200 (Optional Accessory)  
Call waiting  
Making a voice dialing call  
Answering Another Incoming Call with the  
Current Call Suspended  
1 Enter Bluetooth mode  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
2 Enter voice recognize mode  
1) Press the [FNC] button for at least 1 second.  
2) Turn the Control knob to select “Answer, and  
then press the [ENTER] button.  
Press the [AUDIO] button for at least 1 second.  
3 Have the unit recognize your spoken name  
Press the [ENTER] button. If you hear a beep,  
speak a registered name within 2 seconds.  
Answering another Incoming Call after  
Terminating the Current Call  
Press the [SRC] button.  
4 Have the unit recognize the spoken category  
When you hear a beep, speak the category  
within 2 seconds.  
The recognized phone number (name) is displayed.  
When you want to change the displayed phone  
number (name), press the [DISP] button.  
Continuing the Current Call  
KDC-BT50U  
Press the [  
] button.  
KDC-5047U KMR-440U  
1) Press the [ENTER] button.  
2) Turn the Control knob to select “Reject, and  
then press the [ENTER] button.  
5 Make a call  
Press the [ENTER] button.  
Answering the Waiting Call after Terminating  
the Current Call  
If your voice cannot be recognized, a message is displayed.  
Pressing the [ENTER] button allows you to retry voice input.  
Both the name and category requires registration of a voice  
Press the [SRC] button.  
Switching between the Current Call and Waiting  
Call  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [ENTER] button.  
Each pressing of this knob switches the calling  
party.  
Displays of phone number type  
(category)  
The category items in the Phone Book are displayed  
as follows:  
Display  
General”/“  
Information  
General  
Clearing the Disconnection Message  
KDC-BT50U  
Home”/“  
Office”/“  
Mobile”/“  
Other”/“  
Home  
Office  
Mobile  
Other  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [FNC] button for at least 1 second.  
“HF Disconnect” disappears.  
|
26 KDC-BT50U/ KDC-5047U/ KMR-440U  
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)  
Bluetooth Audio Operation  
Before Use  
• For details on the Bluetooth Audio player which  
can be connected, see <About the Bluetooth Audio  
• You need to register your Bluetooth Audio player  
before using it with this unit. For more details, see  
• You need to select the Bluetooth audio player you  
wish to connect. Refer to <Selecting the Bluetooth  
Basic Operation  
Selecting Bluetooth Audio source  
Press the [SRC] button.  
Select the “BT AUDIO” ( KDC-BT50U )/ “BT AUDIO  
EXT” ( KDC-5047U KMR-440U ) display.  
For how to select source item, refer to <Power and  
Pause and play  
Press the [  
] button.  
Music Search  
Push the Control knob towards right or left.  
All or some of the operations above cannot be performed if  
the Bluetooth audio player is not ready for remote control.  
Switching between Bluetooth audio sources does not start  
or stop playback automatically. Perform the operation for  
starting or stopping playback.  
Some audio players cannot be controlled remotely or  
reconnected after Bluetooth disconnection. Operate the  
main unit of the audio player to connect Bluetooth.  
When “2Zone” is set to “ON” and “2Zone F/R Select” is set to  
“Front” of <Audio Control> (page 7), Bluetooth Audio source  
cannot be selected.  
English  
|
27  
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)  
Bluetooth Setup  
KDC-5047U KMR-440U  
Registering Bluetooth device  
Input the PIN code (steps 5 and 6).  
To make your Bluetooth device (cell-phone) usable  
with this unit, you need to register it (pairing). You  
can register up to five Bluetooth devices to this unit.  
5 Input the PIN code  
Operation type  
Operation  
Select the numbers.  
Move to the next digit.  
Delete the last digit.  
Turn the Control knob.  
Push the Control knob towards right.  
Push the Control knob towards left.  
When registering from Bluetooth devices  
1 Turn on the this unit.  
2 Start registering a unit by operating the  
Bluetooth device  
By operating the Bluetooth device, register the  
hands-free unit (pairing). Select “KENWOOD  
BT CD/R-4P1” or “KCA-BT200” from the list of  
connected units.  
6 Transmit the PIN code  
Press the [ENTER] button.  
If “Pairing Success” is displayed, registration is  
complete.  
7 Return to the device list  
Press the [ENTER] button.  
3 Enter a PIN code  
Input the PIN code registered as mentioned in  
Check that registration is complete on the  
Bluetooth device.  
8 Exit Bluetooth mode  
Press the [SRC] button.  
This unit allows up to eight digits to be input for a PIN code.  
If a PIN code cannot be input from this unit, it can be input  
from the Bluetooth device.  
4 By operating the Bluetooth device, start hands-  
free connection.  
If there are 5 or more Bluetooth devices registered, you  
cannot register a new Bluetooth device.  
When registering from this unit  
If the error message appears even though the PIN code is  
1 Enter Bluetooth mode  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
Registering Special Bluetooth device  
Allow registration of a special device that cannot be  
registered normally (pairing).  
2 Enter Function setting mode  
Press the [FNC] button.  
3 Select Bluetooth device registration mode  
The item can be selected and determined as  
follows.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
Search for the Bluetooth device.  
1 Enter Bluetooth mode  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
2 Enter Function setting mode  
Press the [FNC] button.  
When search is completed, “Finished” is displayed.  
3 Select Special device registration mode  
The item can be selected and determined as  
follows.  
4 Select the Bluetooth device  
Turn the Control knob to select desired  
Bluetooth device, and then press the [ENTER]  
button.  
KDC-BT50U  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
When “Paring Success” is displayed, PIN code input  
(steps 5 and 6) is not required. When “Pin Code NG”  
is displayed, press the [ENTER] button. Then enter  
the PIN code (steps 5 and 6).  
4 Select a device name  
Turn the Control knob to select desired device  
|
28 KDC-BT50U/ KDC-5047U/ KMR-440U  
   
name, and then press the [ENTER] button.  
If “Completed” is displayed, registration is  
completed.  
Downloading the Phone Book  
Download the phone book data from the cell-  
phone to this unit so that you can use the Phone  
Book of this unit.  
5 Go through the procedure of <Registering  
Bluetooth device> (page 28) and complete the  
registration (pairing).  
Downloading automatically  
If the cell-phone supports a phone book  
synchronization function, the phone book is  
downloaded automatically after Bluetooth  
connection.  
Cancelling Bluetooth mode  
Press the [FNC] button.  
If the device name is not in the list, select “Other Phones.  
Setting on the cell-phone may be required.  
If no phone book data is found in the unit even after  
“Completed” is displayed, your cell-phone may not support  
automatic download of phone book data. In this case, try  
downloading manually.  
Registering PIN Code  
By operating the Bluetooth device, specify the PIN  
code necessary for registering this unit.  
Downloading from the cell-phone manually  
1 Operate the cell-phone to end the hands-free  
connection.  
1 Enter Bluetooth mode  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
2 Operate the cell-phone to send the phone  
book data to this unit  
By operating the cell-phone, download the phone  
book data to this unit.  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
• During downloading:  
“Downloading” is displayed.  
2 Enter Function setting mode  
Press the [FNC] button.  
• After completion of downloading:  
“Completed” is displayed.  
3 Select PIN code edit mode  
The item can be selected and determined as  
follows.  
3 Operate the cell-phone to start the hand-sfree  
connection.  
Clearing the downloading completion message  
Press any button.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
4 Input the PIN code  
Up to 1000 phone numbers can be registered for each  
registered cell-phone.  
Operation type  
Operation  
Up to 32 digits can be registered for each phone number  
along with up to 50* characters representing a name.  
(* 50: Number of alphabetic alphabetical characters.  
Fewer characters can be input depending on the type of  
characters.)  
Select the numbers.  
Move to the next digit.  
Delete the last digit.  
Turn the Control knob.  
Push the Control knob towards right.  
Push the Control knob towards left.  
5 Register a PIN code  
Press the [ENTER] button.  
If “Completed” is displayed, registration is complete.  
To cancel downloading of the phone book data, operate  
the cell-phone.  
6 Exit Bluetooth mode  
Press the [SRC] button.  
By default, “0000” is specified.  
A PIN code can be specified with up to eight digits.  
English  
|
29  
   
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)  
Bluetooth Setup  
Selecting the Bluetooth device You  
Wish to Connect  
Deleting a Registered Bluetooth  
device  
When two or more Bluetooth devices have already  
been registered, you need to select the Bluetooth  
device you wish to use.  
You can delete a registered Bluetooth device.  
1 Enter Bluetooth mode  
KDC-BT50U  
1 Enter Bluetooth mode  
KDC-BT50U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [ ] button.  
KDC-5047U KMR-440U  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
2 Enter Function setting mode  
Press the [FNC] button.  
2 Enter Function setting mode  
3 Select Bluetooth device deletion mode  
The item can be selected and determined as  
follows.  
Press the [FNC] button.  
3 Select Bluetooth device selection mode  
The item can be selected and determined as  
follows.  
”Settings” “Phone Selection” (to select the  
cellphone) or “Audio Selection” (to select the  
audio player)  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
Device name is displayed.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
“(name)” is displayed.  
4 Delete the selected Bluetooth device  
Turn the Control knob to select desired device  
name, and then press the [ENTER] button.  
4 Select the Bluetooth device  
Turn the Control knob.  
5 Turn the Control knob to select “YES, and then  
press the [ENTER] button.  
“Completed” is displayed.  
5 Set up the Bluetooth device  
Press the [ENTER] button.  
6 Exit Bluetooth mode  
Press the [SRC] button.  
(name)’ or ‘-(name)’ is displayed.  
”: The selected Bluetooth device is busy.  
“-”: The selected Bluetooth device is on standby.  
“ “ (blank): The Bluetooth device is deselected.  
When a registered cell-phone is deleted, its Phone Book,  
log, SMS, and voice tag are also deleted.  
6 Exit Bluetooth mode  
Press the [SRC] button.  
If a cell-phone is already selected, deselect it, and then  
select a different one.  
If you cannot select a device using the audio player,  
connect the device with the audio player.  
|
30 KDC-BT50U/ KDC-5047U/ KMR-440U  
   
Displaying the Firmware Version  
5 Select a mode  
Turn the Control knob.  
Display the version of the firmware of this unit.  
Display  
Operation  
Register a voice tag.  
Play a voice tag.  
1 Enter Bluetooth mode  
KDC-BT50U  
“Register”  
“Check”*  
“Delete”*  
Press the [ ] button.  
KDC-5047U KMR-440U  
Delete a voice tag.  
*Displayed only when a name for which a voice tag has  
been registered is selected.  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
Selecting “Register” (Regist)  
2 Enter Function setting mode  
Press the [FNC] button.  
6 Register a voice tag (first)  
Press the [ENTER] button. When you hear a  
beep, speak the voice tag within 2 seconds.  
3 Select Bluetooth Firmware update mode  
The item can be selected and determined as  
follows.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
The firmware version appears.  
7 Confirm the voice tag (second)  
Press the [ENTER] button. When you hear a  
beep, speak the same voice tag again within 2  
seconds.  
“Completed” is displayed.  
8 Exit Function setting mode  
Press the [  
Return to step 2. You can register another voice tag  
continuously.  
] button for at least 1 second.  
4 Exit Bluetooth mode  
Press the [SRC] button.  
For how to update the firmware, access our web site.  
If your voice cannot be recognized, a message is displayed.  
Pressing the [ENTER] button allows you to retry voice input.  
Selecting “Check” (Play)  
Function of KCA-BT200 (Optional Accessory)  
6 Press the [ENTER] button.  
Play the registered voice and return to step 2.  
Adding a voice dialing command  
Add a voice tag to the phonebook for voice dialing.  
You can register up to 35 voice tags.  
Selecting “Delete” (Delete)  
6 Delete a voice tag  
Press the [ENTER] button.  
1 Enter Bluetooth mode  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
7 Turn the Control knob to select “YES, and then  
press the [ENTER] button.  
2 Enter Function setting mode  
Press the [FNC] button.  
Exit Bluetooth mode  
Press the [SRC] button.  
3 Select Phonebook name edit mode  
The item can be selected and determined as  
follows.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
4 Search for the name to register  
Turn the Control knob to select name, and then  
press the [ENTER] button.  
If a voice tag has already been registered for a  
name, “*” is displayed before the name.  
English  
|
31  
   
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)  
Bluetooth Setup  
Function of KCA-BT200 (Optional Accessory)  
Setting a Voice Command for  
Category  
Add a voice tag to the phone number category  
(type) for voice calling.  
1 Enter Bluetooth mode  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
2 Enter Function setting mode  
Press the [FNC] button.  
3 Select Phone Number type edit mode  
The item can be selected and determined as  
follows.  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
4 Enter Phone Number type edit mode  
Press the [ENTER] button.  
5 Select the category (type) you wish to set  
Turn the Control knob to select desired  
category name, and then press the [ENTER]  
button.  
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”  
6 Select a mode  
Turn the Control knob.  
Display  
Operation  
“Register”  
“Check”*  
“Delete”*  
Register a voice tag.  
Play a voice tag.  
Delete a voice tag.  
*Displayed only when a name for which a voice tag has  
been registered is selected.  
7 Register the category (type) by performing  
8 Exit Bluetooth mode  
Press the [SRC] button.  
Set the voice tag for all the 5 categories. If the voice tag is  
not registered for all the categories, the Phonebook may  
not be recalled by voice command.  
|
32 KDC-BT50U/ KDC-5047U/ KMR-440U  
 
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)  
SMS (Short Message Service)  
Displaying the SMS  
Downloading the SMS  
The SMS received by the cell-phone is displayed on  
the receiver.  
Download the short message (SMS) received by the  
cell-phone so that it can be read on this unit.  
A newly received message is displayed.  
1 Enter Bluetooth mode  
KDC-BT50U  
¤
To prevent car accidents, the driver should not read the  
Press the [ ] button.  
KDC-5047U KMR-440U  
SMS while driving.  
Press the [FNC] button for at least 1 second.  
“BT MODE” is displayed.  
When a new message arrives  
“SMS Received” is displayed.  
The display disappears with any operations.  
2 Enter Function setting mode  
Press the [FNC] button.  
Displaying the SMS  
3 Select SMS download mode  
The item can be selected and determined as  
follows.  
”Settings” “SMS Download”  
To select the item, turn the Control knob. To  
determine the item, press the [ENTER] button.  
1 Enter SMS Inbox mode  
KDC-BT50U  
Press the [  
] button for at least 1 second.  
KDC-5047U KMR-440U  
1) Press the [FNC] button for at least 1 second.  
2) Press the [FNC] button.  
3) The item can be selected and determined as  
follows.  
”Settings” “SMS Inbox”  
To select the item, turn the Control knob.  
To determine the item, press the [ENTER]  
button.  
4 Start downloading  
Press the [ENTER] button.  
“SMS Downloading” is displayed.  
When the downloading finishes, “Completed” is  
displayed.  
5 Exit Bluetooth mode  
Press the [SRC] button.  
2 Select a message  
Turn the Control knob.  
Each press of the [ENTER] button ( KDC-BT50U )/  
[DISP] button ( KDC-5047U KMR-440U ) switches  
between displaying the telephone number or  
name and message reception date.  
The cell-phone must be able to transmit the SMS using  
Bluetooth. Setting on the cell-phone may be required. If  
the cell-phone does not support SMS function, the SMS  
download item in Function Control mode is not displayed.  
When the SMS is downloaded from the cell-phone, the  
unopened messages in the cell-phone are opened.  
The up to 75 already-read and unread short messages  
respectively can be downloaded.  
3 Display the text  
Press the [ENTER] button.  
Turn the Control knob to scroll through the  
message.  
Press the [ENTER] button to return to the message  
list screen.  
4 Exit Bluetooth mode  
Press the [SRC] button.  
The unopened message is displayed at the beginning of the  
list. Other messages are displayed in the order of reception.  
The SMS that are received when the cell-phone is not linked  
with Bluetooth cannot be displayed. Download the SMS.  
The short message cannot be displayed during  
downloading the SMS.  
English  
|
33  
   
Appendix  
• When connecting the USB device, usage of the  
CA-U1EX (option) is recommended.  
Normal playback is not guaranteed when a cable  
other than the USB compatible cable is used.  
Connecting a cable whose total length is longer  
than 5 m can result in abnormal playback.  
About Audio file  
Playable Audio file  
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)  
Playable disc media  
CD-R/RW/ROM  
Playable disc file format  
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.  
iPod/iPhone that can be connected to this  
unit  
Made for  
• iPod nano (1st generation) • iPod nano (2nd generation)  
• iPod nano (3rd generation) • iPod nano (4th generation)  
• iPod nano (5th generation) • iPod with video  
Playable USB device  
USB mass storage class  
Playable USB device file system  
FAT16, FAT32  
Even if the audio files comply with the standards listed  
above, the play may be impossible depending on the  
types or conditions of media or device.  
• iPod classic  
• iPod touch (1st generation)  
• iPod touch (2nd generation)  
Works with  
Playing order of the Audio file  
In the example of folder/file tree shown below, the  
files are played in the order from to .  
^
¡
: Folder  
Folder  
CD  
(1)  
:
A
udiofile  
¡!  
2
• Update iPod/iPhone software to the latest version.  
• Type of control available varies depending  
on the type of connected iPod. See  
3
¡"  
¡#  
4
www.kenwood.com/cs/ce/ipod/ for further details.  
¡$  
5
• The word “iPod” appearing in this manual indicates  
the iPod or the iPhone connected with the iPod  
connection cable* (optional accessory).  
¡%  
¡P  
* Not supported model KCA-iP500.  
• Refer to the web site for connectable iPod and iPod  
connection cable.  
An online manual about audio files is put on the site,  
manual, detailed information and notes which are not  
written in this manual are provided. Make sure to read  
through the online manual as well.  
If you start playback after connecting the iPod, the music  
that was playing on the iPod is played first.  
In this case, “RESUMING” is displayed without displaying a  
folder name, etc. Changing the browse item will display a  
correct title, etc.  
In this manual, the word “USB device” is used for flash  
memories and digital audio players which have USB  
terminals.  
You cannot operate iPod if “KENWOOD” or “” displayed on  
iPod.  
About USB device  
• When the USB device is connected to this unit,  
it can be charged up provided that this unit is  
powered.  
• Install the USB device in the place where it will not  
prevent you from driving your vehicle properly.  
• You cannot connect a USB device via a USB hub and  
Multi Card Reader.  
• Save backups of the audio files used with this unit.  
The files can be erased depending on the operating  
conditions of the USB device.  
We shall have no compensation for any damage  
arising out of erasure of the stored data.  
• No USB device comes with this unit. You need to  
purchase a commercially available USB device.  
|
34 KDC-BT50U/ KDC-5047U/ KMR-440U  
   
KDC-BT50U  
About “KENWOOD Music Editor”  
About the Cell-Phone  
This unit conforms to the following Bluetooth  
specifications:  
• This unit supports the PC application “KENWOOD  
Music Editor Lite ver1.0” or later.  
• When you use the audio file with database  
information added by the “KENWOOD Music Editor  
Lite ver1.0, you can search a file by title, album or  
artist name using the <Music Search> (page 9).  
Version  
Profile  
Bluetooth Standard Ver. 2.1 + EDR  
HFP (Hands Free Profile)  
OPP (Object Push Profile)  
PBAP (Phonebook Access Profile)  
SYNC (Synchronization Profile)  
• In the Instruction manual, the term “Music Editor  
media” is used to mean the device that contains  
audio files with database information added with  
KENWOOD Music Editor.  
• “KENWOOD Music Editor Lite ver1.0” is available from  
the following web site:  
For the cell-phones verified for compatibility, access  
the following URL:  
• For further information on “KENWOOD Music Editor  
Lite ver1.0, refer to the site above or the application  
help.  
The units supporting the Bluetooth function have been  
certified for conformity with the Bluetooth Standard  
following the procedure prescribed by Bluetooth  
SIG. However, it may be impossible for such units to  
communicate with your cell-phone depending on its type.  
HFP is a profile used to make a hands-free call.  
OPP is a profile used to transfer data such as a phone book  
between units.  
KDC-BT50U  
About the Bluetooth Audio player  
This unit conforms to the following Bluetooth  
specifications:  
Version  
Profile  
Bluetooth Standard Ver. 2.1 + EDR  
A2DP (Advanced Audio Distribution Profile)  
AVRCP (Audio/Video Remote Control Profile)  
A2DP is a profile designed to transfer the music from an  
audio player.  
AVRCP is a profile designed to control playback and  
selection of music by an audio player.  
English  
|
35  
     
Troubleshooting Guide  
Some functions of this unit may be disabled by  
some settings made on this unit.  
The messages shown below display your  
systems condition.  
TOC Error:  
• No disc has been loaded in the disc  
magazine.  
• The CD is quite dirty. The CD is upside-  
down. The CD is scratched a lot.  
!
!
• Cannot set up Display.  
set to Off.  
Error 05:  
Error 77:  
The disc is unreadable.  
• Cannot set up the subwoofer.  
• Cannot set up the low pass filter.  
• No output from the subwoofer.  
“SubWoofer” of <Audio Control> (page 7) is not set to  
On.  
The unit is malfunctioning for some reason.  
Press the reset button on the unit. If the  
“Error 77” code does not disappear, consult  
your nearest service center.  
Error 99:  
Something is wrong with the disc magazine.  
Or the unit is malfunctioning for some reason.  
Check the disc magazine. And then press  
the reset button on the unit. If the “Error  
99” code does not disappear, consult your  
nearest service center.  
!
Cannot set up the subwoofer Phase.  
“LPF SubWoofer ADJ” of <Audio Control> (page 7) is  
set to “Through.  
What might seem to be a malfunction in your unit  
may just be the result of slight misoperation or  
miswiring. Before calling service, first check the  
following table for possible problems.  
IN (Blink):  
The CD player section is not operating  
properly.  
Reinsert the CD. If the CD cannot be  
ejected or the display continues to flash  
even when the CD has been properly  
reinserted, please switch off the power  
and consult your nearest service center.  
General  
? The Key beep does not sound  
The preout jack is being used.  
The Key beep cannot be output from the preout  
jack.  
Protect (Blink): The speaker wire has a short-circuit or  
touches the chassis of the vehicle, and then  
the protection function is activated.  
Tuner source  
Wire or insulate the speaker cable properly  
and press the reset button. If the “Protect”  
code does not disappear, consult your  
nearest service center.  
? Radio reception is poor.  
The car antenna is not extended.  
Pull the antenna out all the way.  
Unsupported File:  
Disc source  
An Audio file is played with a format that this  
unit can’t support.  
? The specified disc does not play, but another one  
plays instead.  
Copy Protection:  
The specified CD is quite dirty.  
A copy-protected file is played.  
Clean the CD, referring to the CD cleaning of the  
Read Error:  
The file system of the connected USB device  
is broken.  
Copy the files and folders for the USB  
device again. If the error message is still  
displayed, initialize the USB device or use  
other USB devices.  
The disc is severely scratched.  
Try another disc instead.  
Audio file source  
? The sound skips when an Audio file is being  
No Device:  
N/A Device:  
The USB device is selected as a source  
although no USB device is connected.  
Change the source to any source other  
than USB. Connect an USB device, and  
change the source to USB again.  
played.  
The media is scratched or dirty.  
Clean the media, referring to the CD cleaning of  
the section on <Handling CDs> (page 3).  
The recording condition is bad.  
Record the media again or use another media.  
• An unsupported USB device is connected.  
• Connection to the iPod has failed.  
Check that the connected iPod is an iPod  
that is supported. See <About Audio file>  
(page 34) for information on supported  
iPods.  
|
36 KDC-BT50U/ KDC-5047U/ KMR-440U  
 
No Music Data/Error 15:  
• The connected USB device contains no  
Too Long:  
The word or utterance is too long to be  
recognized.  
playable audio file.  
• Media was played that does not have data  
recorded that the unit can play.  
No Phonebook: Data is not contained in the phone book.  
No Message: No short message in In Box.  
USB ERROR:  
iPod Error:  
Some trouble may have occurred to the  
connected USB device.  
Remove the USB device, then cycle the  
power switch to ON. If the same display is  
repeated, use another USB device.  
No Record:  
The voice tag is not registered in the  
phonebook.  
Memory Full: The number of voice tags reaches the  
maximum number to be registered in the  
phonebook.  
Connection to the iPod has failed.  
Remove the USB device and then  
reconnect it.  
Confirm that the software for the iPod is  
the latest version.  
Favorite: No Memory:  
The procedure is not registered to Favorite  
Preset Memory  
No Access:  
No Voice:  
The procedure preset with Favorite Control  
cannot be available. The preset content may  
not be recalled depending on the selected  
source or mode.  
USB REMOVE (Blink):  
The Remove mode has been selected for the  
USB device/iPod. You can remove the USB  
device/iPod safely.  
No call.  
No Number:  
No Data:  
• The calling party does not notify a caller ID.  
• There is no phone number data.  
• There is no outgoing call list.  
• There is no incoming call list.  
• There is no missed call list.  
• There is no phone book list.  
No Entry:  
The cell-phone has not been registered  
(pairing).  
HF Disconnect: The unit cannot communicate with the cell-  
phone.  
HF Error 07:  
The memory cannot be accessed.  
Turn off the power and on again. If this  
message still appears, press the reset  
button on the control unit.  
HF Error 68:  
The unit cannot communicate with the cell-  
phone.  
Turn off the power and on again. If this  
message still appears, press the reset  
button on the control unit.  
Unknown:  
The Bluetooth device cannot be detected.  
Device Full:  
5 Bluetooth device have already been  
registered. No more Bluetooth devices are  
registered.  
PIN Code NG: The PIN code is wrong.  
Connect NG: The unit cannot be connected to the device.  
Pairing Failed: Pairing error.  
Err No Matching:  
The voice tag is wrong. Voice cannot be  
recognized because of an unregistered voice  
tag, etc.  
Too Soft:  
Voice is too small and cannot be recognized.  
Voice is too large to be recognized.  
Too Loud:  
English  
|
37  
Specifications  
FM tuner section  
CD player section  
Frequency range (50 kHz step)  
: 87.5 MHz – 108.0 MHz  
Laser diode  
: GaAlAs  
Usable sensitivity (S/N = 26dB)  
: 0.7 μV/75 Ω  
Digital filter (D/A)  
: 8 Times Over Sampling  
Quieting Sensitivity (S/N = 46dB)  
: 1.6 μV/75 Ω  
D/A Converter  
: 24 Bit  
Frequency response ( 3.0 dB)  
: 30 Hz – 15 kHz  
Spindle speed  
: 500 – 200 rpm (CLV)  
Signal to Noise ratio (MONO)  
: 65 dB  
Wow & Flutter  
: Below Measurable Limit  
Selectivity (DIN) ( 400 kHz)  
: ≥ 80 dB  
Frequency response ( 1 dB)  
: 10 Hz – 20 kHz  
Stereo separation (1 kHz)  
: 35 dB  
Total harmonic distortion (1 kHz)  
: 0.008 %  
Signal to Noise ratio (1 kHz)  
: 110 dB  
Dynamic range  
: 93 dB  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
WMA decode  
: Compliant with Windows Media Audio  
AAC decode  
: AAC-LC .m4a” files  
MW tuner section  
Frequency range (9 kHz step)  
: 531 kHz – 1611 kHz  
Usable sensitivity (S/N = 20dB)  
: 25 µV  
LW tuner section  
Frequency range  
: 153 kHz – 279 kHz  
Usable sensitivity (S/N = 20dB)  
USB Interface  
USB Standard  
: USB1.1/ 2.0 (Full speed)  
File System  
: FAT16/ 32  
Maximum Supply current  
: 500 mA  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
WMA decode  
: Compliant with Windows Media Audio  
AAC decode  
: AAC-LC .m4a” files  
: 45 µV  
Bluetooth section (KDC-BT50U)  
Version  
: Bluetooth Ver. 2.1 + EDR Certified  
Frequency range  
: 2.402 – 2.480 GHz  
Output Power  
: +4dBm (MAX), 0dBm (AVE) Power Class 2  
Maximum Communication range  
: Line of sight approx.10m (32.8 ft)  
Profiles  
: HFP (Hands Free Profile)  
: HSP (Headset Profile)  
: SPP (Serial Port Profile)  
Audio section  
Maximum output power  
: 50 W x 4  
PWR DIN45324,+B=14.4V  
: 30 W x 4  
: A2DP (Advanced Audio Distribution Profile)  
: AVRCP (Audio/Video Remote Control Profile)  
: PBAP (Phonebook Access Profile)  
: OPP (Object Push Profile)  
: SYNC (Synchronization Profile)  
: MAP (Message Access Profile )  
Speaker Impedance  
: 4 – 8 Ω  
Tone action  
Bass : 100 Hz 8 dB  
Middle : 1 kHz 8 dB  
Treble : 12.5 kHz 8 dB  
Preout level / Load (CD)  
: 2500 mV/10 kΩ  
Preout impedance  
: ≤ 600 Ω  
|
38 KDC-BT50U/ KDC-5047U/ KMR-440U  
Auxiliary input  
Frequency response ( 3 dB)  
: 20 Hz – 20 kHz  
Input Maximum Voltage  
: 1200 mV  
Input Impedance  
: 10 kΩ  
General  
Operating voltage  
KDC-BT50U : 14.4 V (10.5 – 16V allowable)  
KDC-5047U/ KMR-440U  
: 14.4 V (11 – 16V allowable)  
Maximum Current consumption  
: 10 A  
Installation Size (W x H x D)  
: 182 x 53 x 155 mm  
Weight  
: 1.3 kg  
Specifications subject to change without notice.  
English  
|
39  
This Product is not installed by the manufacturer of a vehicle on the  
production line, nor by the professional importer of a vehicle into an EU  
Member State.  
The Bluetooth word mark and logos are owned by  
the Bluetooth SIG, Inc. and any use of such marks  
by Kenwood Corporation is under license. Other  
trademarks and trade names are those of their  
respective owners.  
Information on Disposal of Old Electrical and Electronic  
Equipment and Batteries (applicable for EU countries  
that have adopted separate waste collection systems)  
The “AAC” logo is a trademark of Dolby Laboratories.  
iTunes is a trademark of Apple Inc.  
iPod is a trademark of Apple Inc., registered in the U.S.  
and other countries.  
Products and batteries with the symbol (crossed-out  
wheeled bin) cannot be disposed as household waste.  
Old electrical and electronic equipment and batteries  
should be recycled at a facility capable of handling these  
items and their waste byproducts.  
Contact your local authority for details in locating a recycle  
facility nearest to you.  
Proper recycling and waste disposal will help conserve  
resources whilst preventing detrimental effects on our  
health and the environment.  
iPhone is a trademark of Apple Inc.  
“Made for iPod” means that an electronic accessory  
has been designed to connect specifically to iPod and  
has been certified by the developer to meet Apple  
performance standards.  
“Works with iPhone” means that an electronic  
accessory has been designed to connect specifically  
to iPhone and has been certified by the developer to  
meet Apple performance standards.  
Notice: The sign “Pb” below the symbol for batteries  
indicates that this battery contains lead.  
The marking of products using lasers  
Apple is not responsible for the operation of this  
device or its compliance with safety and regulatory  
standards.  
CLASS 1  
LASER PRODUCT  
The label is attached to the chassis/case and says that the component  
uses laser beams that have been classified as Class 1. It means that the  
unit is utilizing laser beams that are of a weaker class. There is no danger  
of hazardous radiation outside the unit.  
This symbol mark indicates that Kenwood  
manufactured this product so as to  
decrease harmful influence on the  
environment.  
|
40 KDC-BT50U/ KDC-5047U/ KMR-440U  
Magyar  
Declaration of Conformity with regard to  
the EMC Directive 2004/108/EC  
Alulírott, Kenwood, kijelenti, hogy a jelen KDC-BT50U megfelel az 1999/5/EC  
irányelvben meghatározott alapvető követelményeknek és egyéb vonatkozó  
előírásoknak.  
Svenska  
For KDC-BT50U:  
Declaration of Conformity with regard to  
the R&TTE Directive 1999/5/EC  
Härmed intygar Kenwood att denna KDC-BT50U stär l överensstämelse med de  
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av  
direktiv 1999/5/EG.  
Suomi  
Manufacturer:  
Kenwood vakuuttaa täten että KDC-BT50U tyyppinen laite on direktiivin  
Kenwood Corporation  
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan  
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen  
mukainen.  
EU Representative's:  
Kenwood Electronics Europe BV  
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands  
Slovensko  
S tem Kenwood izjavlja, da je ta KDC-BT50U v skladu z osnovnimi zahtevami in  
ostalimi ustreznimi predpisi Direktive 1999/5/EC.  
Slovensky  
Spoločnosť Kenwood týmto vyhlasuje, že KDC-BT50U spĺňa zákldné požiadavky  
a ďalšie prislušné ustanovenia Direktĺvy 1999/5/EC.  
English  
Dansk  
Undertegnede Kenwood erklærer harved, at følgende udstyr KDC-BT50U  
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.  
Ελληνικά  
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Kenwood ΔΗΛΩΝΕΙ ΟΤΙ KDC-BT50U ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ  
ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ  
1999/5/EK.  
Hereby, Kenwood declares that this unit KDC-BT50U is in compliance with the  
essential requirements and other relevant provisions of Directive 1999/5/EC.  
Français  
Par la présente Kenwood déclare que l’appareil KDC-BT50U est conforme aux  
exigences essentielles et aux autres dispositions pertinentes de la directive  
1999/5/CE.  
Par la présente, Kenwood déclare que ce KDC-BT50U est conforme aux  
exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui  
lui sont applicables.  
Eesti  
Sellega kinnitab Kenwood, et see KDC-BT50U vastab direktiivi 1999/5/EC  
põhilistele nõudmistele ja muudele asjakohastele määrustele.  
Deutsch  
Latviešu  
Hiermit erklärt Kenwood, dass sich dieser KDC-BT50U in Übereinstimmung mit  
den grundlegenden Anforderungen und den anderen relevanten Vorschriften  
der Richtlinie 1999/5/EG befindet. (BMWi)  
Ar šo, Kenwood, apstiprina, ka KDC-BT50U atbilst Direktīvas 1999/5/EK  
galvenajām prasībām un citiem tās nosacījumiem.  
Lietuviškai  
Hiermit erklärt Kenwood die Übereinstimmung des Gerätes KDC-BT50U mit den  
grundlegenden Anforderungen und den anderen relevanten Festlegungen der  
Richitlinie 1999/5/EG. (Wien)  
Šiuo, Kenwood, pareiškia, kad šis KDC-BT50U atitinka pagrindinius Direktyvos  
1999/5/EB reikalavimus ir kitas svarbias nuostatas.  
Malti  
Nederlands  
Hawnhekk, Kenwood, jiddikjara li dan KDC-BT50U jikkonforma mal-ħtiġijiet  
essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/  
EC.  
Hierbij verklaart Kenwood dat het toestel KDC-BT50U in overeenstemming  
is met de essentiële eisen en de andere relevante bepalingen van richtlijn  
1999/5/EG.  
Bij deze verklaat Kenwood dat deze KDC-BT50U voldoet aan de essentiële eisen  
en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.  
Українська  
Компанія Kenwood заявляє, що цей виріб KDC-BT50U відповідає ключовим  
вимогам та іншим пов’язаним положенням Директиви 1999/5/EC.  
Italiano  
Con la presente Kenwood dichiara che questo KDC-BT50U è conforme ai  
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva  
1999/5/CE.  
Turkish  
Kenwood, işbu belge ile KDC-BT50U numaralı bu ünitenin 1999/5/EC  
Direktifi’nin özel gereksinimlerine ve ilgili diğer hükümlerine uygun olduğunu  
beyan eder.  
Español  
Por medio de la presente Kenwood declara que el KDC-BT50U cumple con los  
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de  
la Directiva 1999/5/CE.  
Português  
Kenwood declara que este KDC-BT50U está conforme com os requisitos  
essenciais e outras disposições da Directiva 1999/5/CE.  
Polska  
Kenwood niniejszym oświadcza, że KDC-BT50U spełnia zasadnicze wymogi  
oraz inne istotne postanowienia dyrektywy 1999/5/EC.  
For Turkey  
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli  
ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının  
Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.  
Český  
Kenwood timto prohlasuje, ze KDC-BT50U je ve shode se zakladnimi pozadavky  
a s dalsimi prislusnymi ustanoveni Narizeni vlady c. 426/2000 Sb.  
This product complies with Directive, Number 26891  
regarding “REGULATION ON THE RESTRICTION OF THE USE  
OF CERTAIN HAZARDOUS SUBSTANCES IN LECTRICAL AND  
ELECTRONIC EQUIPMENT.  
English  
|
41  

Nokia 6102 User Manual
Motorola international 2700 User Manual
Miele CVA 2662 User Manual
Lenoxx Electronics CD109 User Manual
Lenovo THINKCENTRE 8084 User Manual
Kenwood KDC W4737U User Manual
Intel X18 M User Manual
Hitachi Travelstar 5K500B User Manual
Echo Bear Cat SC3270 70380 User Manual
Antec Quiet Computing 0761345 15250 1 NA User Manual