Miele CVA 2662 User Manual

Operating and Installation

Instructions

Coffee System

CVA 2662

en - US, CA

To prevent accidents

and machine damage

read these instructions

before

installation or use.

M.-Nr. 07 357 080

Contents

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Descaling the coffee system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Removing a jammed capsule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Coffee glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

The Espresso range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

The "Pure Origin" Espresso range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

The Lungo range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances basic safety precautions should always be

followed, including the following:

Read all instructions before installation or use of the coffee system.

Proper use

Please read these instructions

This coffee system is for household

carefully to prevent accidents and

use only, for the preparation of coffee

machine damage.

beverages (espresso, cappuccino and

coffee).

This appliance complies with current

Do not use this machine other than for

safety requirements. Improper use

its intended use. Any other use could

of the appliance can cause personal

be hazardous.

injury and material damage.

Persons which lack physical,

sensory or mental abilities or

Read this safety information carefully

before operating the appliance.

They contain important information

on the safe installation, operation,

and care of your coffee system. To

avoid the risk of personal injury or

damage to the coffee system, it is

important that you carefully read the

instructions.

experience with the machine should not

use it without supervision or instruction

by a responsible person.

Children

Close supervision is necessary

when any appliance is used by or near

children. They could easily be scalded

or burned.

Keep them in a safe place and pass

them on to any future user.

Never let children play with the

coffee system.

IMPORTANT SAFETY INSTRUCTIONS

Technical safety

This appliance must not be installed

or operated outdoors.

Before installing the appliance

check for externally visible damage.

Before service or maintenance

Do not operate a damaged appliance.

disconnect the power supply by either

removing the fuse, “tripping” the circuit

breaker or unplugging the unit.

Before connecting the appliance to

the electrical supply make sure that the

voltage and frequency listed on the

data plate correspond with the

This appliance is not designed for

maritime use or for use in mobile

household electrical supply. If in doubt, installations such as recreational

consult a qualified technician.

vehicles or aircraft. However, under

certain conditions it may be possible for

installation in these applications. Please

contact the Miele Technical Service

Department with specific requirements.

Be certain your appliance is

properly installed and grounded by a

qualified technician. To guarantee the

electrical safety of this appliance,

continuity must exist between the

appliance and an effective grounding

system. It is imperative that this basic

safety requirement be met. If there is

Installation work and repairs must

only be performed by a trained

technician in accordance with national

and local safety regulations. Repairs

any doubt, have the electrical system of and other work by unauthorized

the house checked by a qualified

electrician.

persons could be dangerous and may

void the warranty.

The appliance must be properly

While the appliance is under

installed before operation to ensure that warranty repairs should only be

no electrical components are

accessible. Ensure that power is not

supplied to the appliance while

installation work, repairs or

performed by an authorized service

technician. Otherwise the warranty is

void.

Defective components should be

maintenance is performed.

replaced by Miele original spare parts

only. Only with these parts can the

manufacturer guarantee the safety of

the appliance.

Do not use an extension cord to

connect the appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance

(danger of overheating).

To protect against fire, electric

shock and injury to persons do not

submerge the cord or plugs in water or

other liquids.

IMPORTANT SAFETY INSTRUCTIONS

Do not let the cord hang over the

Use

edge of a table or counter, or touch hot

surfaces.

Use only Nespresso-coffee

capsules with this machine. The use of

Do not operate any appliance with a other products will damage the

damaged cord or plug, or after the

appliance.

appliance malfunctions or has been

damaged in any manner. Contact

Miele.

Caution! Risk of burns when

dispensing hot beverages, they are

extremely hot.

Always attach the cord to the

appliance first, then plug it into the wall

outlet. To disconnect, turn the machine

off, then remove the plug from the wall

outlet.

Caution! Do not look directly or, with

an optical instrument into the

lighting - laser radiation.

Never open the outer casing of the

Do not reach into the brew unit

appliance. Tampering with electrical

connections or components and

mechanical parts is dangerous and

may cause machine damage.

unless the appliance is disconnected

from the power supply. Danger of

injury.

The water lines must be rinsed and

If the machine is installed in

the machine cleaned thoroughly before

the first coffee is prepared. The

cappuccinatore should also be

cleaned.

combination with other appliances, a

protective base should be installed

between the appliance and the unit

(except for combinations with a plate

warmer).

Only fill the water tank with cold,

fresh tap water. Warm or hot water, or

any other liquids may damage the

machine. The water should be changed

daily to prevent bacteria or mold

growth.

Install or locate this appliance only

in accordance with the provided

installation instructions.

Do not use deionized or mineral

water. Mineral water leads to heavy

calcium buildup in the machine that

can damage the unit.

Only use cold plain milk in the

cappuccinatore. Flavored milk products

contain substances that can clog the

machine.

IMPORTANT SAFETY INSTRUCTIONS

Do not place anything other than

To avoid injuries allow the coffee

Nespresso capsules un the capsule

carousel.

system to cool before cleaning or

before putting on or taking off parts.

Turn the machine off at the main switch

when not in use and before cleaning.

Do not use damaged, broken or

dented capsules! They may jam in the

machine and damage it.

The water in the drip tray can be

very hot. Use caution when emptying it.

Danger of burns.

Never place a cup with an

alcohol-coffee mixture underneath the

coffee dispenser. Plastic parts of the

unit could catch fire!

The coffee system must be

descaled regularly with the supplied

descaling tablets. In areas with very

hard water the machine needs to be

descaled more often.

The hot water and steam dispensed

could cause scalding. These functions

must be used carefully. Never hold any

parts of the body under the steam

nozzle or the hot water dispenser. The

machine must never be used to clean

objects.

The capsule plate will soil more or

less depending on the coffee capsule

used. Clean the capsule plate every 1

to 2 months with a cleaning tablet,

available from Miele.

Never use a steam cleaner to clean

the appliance. Pressurized steam could

damage electrical components and

cause a short circuit.

Only use the descaling tablets

provided by Miele and be sure to use

the correct mixture of water and

descaler. Otherwise appliance damage

may occur.

Clean the coffee system daily to

prevent bacterial growth. All parts of

the coffee system are dishwasher-safe

except for the capsule plate and the

plastic drip tray. Failure to properly

maintain machine may cause health

issues.

Do not hang, lean, sit or place heavy

items on the door. The machine may be

damaged.

The use of accessories not

recommended by the appliance

manufacturer may result in fire, electric

shock or injury to persons.

Do not clean inside the capsule

plate opening. Danger on injury.

Do not reach into the perforator.

The appliance is designed for use

Injuries may occur.

in room temperatures between 59°F

and 140°F (15°C and 60°C). Do not use

the appliance outside of this range of

temperatures.

Do not touch hot surfaces. Use

buttons or steam lever.

SAVE THESE INSTRUCTIONS

AND REVIEW THEM

PERIODICALLY

Guide to the coffee system

Front view

aOn/Off s touch control

bDisplay

cLeft arrow <, to scroll through program options

dOK touch control, to confirm selected program options and save settings

eRight arrow >, to scroll through program options

fr Drink selection touch control to select the beverage type (coffee or

espresso)

gDoor grip

hPlastic drip tray

iMetal drip tray

jCoffee dispenser

kInset for Cappuccinatore

lValve / Lever for steam and hot water

Guide to the coffee system

Interior view

mMain Switch

nCapsule plate (replace with descaling funnel when descaling is performed)

oBrew unit

pCapsule carousel

qCarousel tray

rWater tank

sDrip tray with grid

(with no-spill grid for transport)

tWaste container

Display

Touch controls

Display

Select a touch control with your

fingertip to use the machine.

COSI

o Espresso

K1 K2 K3 K4 K5

The main menu in the display shows

the following symbols:

Up to 5 different coffee types

Steam

Hot water

User profile for up to 9 different

users

G Maintenance program - rinse

Maintenance program - descale

Settings - customize appliance

^ Use < or > to select a program item

in the display. When the desired

program item is highlighted, select

OK.

First steps to use

Before the first use

Setting the clock

^ Tap < or > until the desired clock

format (12 or 24-hour clock) is

highlighted. Confirm with OK.

The appliance must be correctly

installed and connected before the

first use. See the "Installation

Instructions".

^ Enter the time of day: Use the arrow

buttons to first set the hour. Confirm

with OK.

Clean the appliance and remove

protective foils before the first use.

See "Cleaning and Care".

^ Use the same process to set the

minutes.

^ Select when you would like the time

to be displayed:

Switching on

^ Select On/Off s to turn the coffee

system on.

– "On": The time of day will be

displayed even if the appliance is off.

The first few times the machine is

turned on with the main switch a

welcome screen will briefly appear in

the display, followed by other

messages. The welcome screen will be

displayed until 5 beverages have been

prepared.

– "On for 60 seconds": When the

appliance is turned off, the time of

day will remain displayed for 60

seconds.

– "Not displayed": When the

appliance is switched off, the time

display immediately goes out.

^ Select OK to confirm.

Míele Welcome

Once the settings have been entered

correctly, the display will show Set-up

successful.

During the very first use, you will be

prompted to select a language.

^ Tap < or > until the desired language

appears in the display.

^ Confirm the message with OK.

^ Confirm by selecting OK.

The desired language is now set.

First steps to use

Filling lines with water

Switching off

The appliance is drained completely

before leaving the factory. Before the

first drink is prepared, you will need to

pump water into the lines.

^ Select On/Off s to turn the coffee

system off.

When a coffee beverage is

prepared, the unit rinses once

before it switches itself off.

^ Place a cup under the coffee

dispenser.

Hot water

K1 K2 K3 K4 K5

o n

^ Select Hot water o using < or >.

^ Confirm with OK.

^ Allow some hot water to run into a

cup.

^ Turn off the water by selecting OK

again.

The lines are now filled with water, and

the appliance is ready to use.

Filling water and coffee capsules

The appliance should be cleaned

before filling it with water and coffee

capsules (see "Cleaning and care").

Be sure to set the water hardness

(see "Settings - Water hardness").

Filling the water tank

^ Lift the water tank a and pull it out

The water tank should be washed and

filled with fresh cold tap water before

each day of use.

^ Fill the container with fresh, cold tap

water to the "Max." mark.

,^{Never put hot water or any other}

liquid except cold water into the

water tank. Do not use mineral water

in the appliance. It causes heavy

lime build-up and will damage the

appliance.

A valve at the tank front prevents leaks.

^ Push the water tank back into the

machine.

^ Open the appliance door.

Filling water and coffee capsules

Filling the coffee capsule

carousel

Only insert Nespresso coffee

capsules in the carousel.

Damaged, broken or dented

capsules should not be used they

may jam in the machine.

^ Pull the carousel tray, a, all the way

out.

There are five chambers, each can hold

four capsules. The coffee types have to

be allocated to their respective

^ Insert the capsules into the

chambers, c of the capsule carousel

b, with the flat, foil side facing down.

The capsule carousel can also be

lifted up and out of the tray for easier

chambers to get the desired coffee

type. You can also fill each chamber

with the same coffee type.

The chambers are factory set for a

coffee type. Fill the chambers

respectively or program other coffee

types according to your preference.

See "Allocating various coffee types".

Take care that the capsules sit

loosely in the chambers so they do

not jam.

^ Insert the carousel into the carousel

tray.

^ Push the carousel all the way into the

machine.

^ Close the door.

The machine aligns the carousel

automatically. A sound will be heard.

Removing the coffee capsules

^ Pull out the carousel tray and lift out

the carousel.

^ Push the carousel ring up and take

out the capsules.

Allocating various coffee types

Twelve different Nespresso coffee

types are available for this coffee

Several options are now available:

system (as well as occasional "Limited

Edition" blends). They differentiate in

terms of acidity, fruitness, bitterness

and roast. Therefore the preparing

times will vary.

Select type

Allows you to select from the coffee

types which have already been

allocated.

^ Use < or > to select the coffee type

you wish to allocate to the selected

chamber. Confirm with OK.

See "The Espresso / Lungo range" for

more information on the coffee types.

Allocating the coffee types

Rename type

Five different coffee types can be filled

in the five chambers of the capsule

carousel. The chambers can be either

allocated to the desired coffee types or

filled with the same coffee type in all

chambers.

Allows you to enter a new type of

coffee.

^ Tap < or > until "Rename type" is

highlighted. Confirm with OK.

In the display you will see letters and

numbers. Use the arrow buttons to

select the desired character.

Settings F

K1 K1 K3 K4 K5

L n

A new word will always be capitalized,

and the appliance will then switch to

lowercase letters.

^ Select "Settings F" from the main

menu. Confirm with OK.

^ Tap an arrow button until "Allocate

type" is highlighted. Confirm with OK.

^ Use < or > to select the desired

characters.

^ Use the arrow buttons to select

"Chamber 1" (for example). Confirm

with OK.

^ Confirm with OK.

You will see the selected text in the

upper line of the display.

If you misspell a word, use the

arrow buttons to select the trash can

symbol. Confirm with OK. The last

entered character will be deleted.

Allocating various coffee types

Saving an entry

You can allocate up to 10 types of

^ When the entry is complete, use < or

> to select OK. Confirm by pressing

OK again.

coffee. If you try to allocate more

than 10 coffee types "Memory full"

will appear in the display. You will

need to first erase a coffee type to

create space.

The menu for the chamber you are

"loading" will appear in the display.

^ To exit the menu, use < or > to select

"back A". Confirm with OK.

Once you allocate a coffee type, it

will be available for use in any

chamber, even if you entered it

under a specific program item, for

example under chamber 1.

Not saving an entry

^ If you do not wish to save an entry,

use < or > to select "back A".

Confirm with OK.

Chamber symbols in the display

Once you have assigned a type of

coffee to a chamber, a coffee bean

symbol K will appear in front of the

chamber number in the main menu.

When you select a chamber the type of

coffee allocated to that chamber will

appear in the top line of the display.

The following options will only

appear once a new coffee type has

been added:

Change type

This option can be used to change the

type of coffee allocated to a chamber.

If the chamber is empty, an

exclamation point will appear after the

bean symbol.

^ Tap < or > until "Change type" is

highlighted. Confirm with OK.

Now continue as you would in "Rename

type".

If the chamber has not been allocated

with a type of coffee a question mark

will appear after the coffee bean

symbol, regardless of whether the

chamber if full or empty. When the

chamber is selected "Empty" will

appear in the top line of the display and

coffee cannot be dispensed from that

chamber.

Delete type

This option can be used to completely

delete a coffee type.

^ Select "Delete type" and confirm with

OK.

^ Use < or > to select the coffee type

to be deleted.

^ Confirm with OK.

A check appears after the coffee type

and it will be erased.

Making coffee / espresso

Pre-warming the cups

Clean the coffee system daily to

prevent bacterial growth. All parts of

the coffee system are dishwasher-

safe except for the capsule plate

and the plastic drip tray. Failure to

properly maintain machine may

cause health issues.

Pre-warming the cups allows the coffee

to fully develop the flavor and aroma.

Use caution. Steam and hot water

are very hot.

^ Place a cup under the steam / hot

water valve.

Rinse the water lines before

preparing the first drink of the day. If

the machine is still cold this will take

place automatically. The heating

system will heat and the water lines

will be rinsed.

To pre-warm with hot water

^ Select hot water "o" using < or >.

^ Confirm with OK.

^ Allow some hot water run into a cup.

^ Select On/Off s to turn the machine

on.

^ Turn off the water by selecting OK

again.

The following message appears:

^ Leave the cup for a few seconds to

warm, then pour the water away.

Heating-up phase

To pre-warm with steam

When the unit is heated, a message

appears:

^ Select heating with steam "L" using

< or >.

^ Press the steam lever down.

Rinsing

The steam supply is temporary. If

the steam stops prematurely push

the steam lever up then down again.

Water will now run out of the coffee

dispenser and a noise will be heard as

the carousel aligns.

^ Push the lever up to stop the steam

from dispensing.

The main menu then appears in the

display:

^ Pour away any excess water.

COSI

o Espresso

K1 K2 K3 K4 K5

Making coffee / espresso

Coffee and Espresso

Double portion

^ Place a cup under the coffee

dispenser.

If you would like a double portion of

coffee or espresso, or to prepare two

portions at the same time,

COSI

o Espresso

^ select OK a second time while the

display still reads "Double portion?".

K1 K2 K3 K4 K5

^ Use < or > to select the desired

coffee type.

The two portions are prepared one after

the other.

^ Use the "Drink selection" touch

control to select Espresso or Coffee.

Interrupting preparation

The beverage type you have

^ Select OK when "Stop" appears in the

display.

selected will appear in the upper

right hand corner of the display.

The drink preparation will stop.

^ Select OK.

The desired beverage will now be

dispensed.

If you prefer to have a portion size that

is larger or smaller than the pre-set

sizes for coffee and espresso, see

"Programming quantities - serving

sizes").

Making coffee / espresso

Preparing hot milk, frothed

milk, and Cappuccino

This appliance includes a

Cappuccinatore, which can be used to

easily prepare warm milk, frothed milk,

and cappuccino.

Pushed in: Milk is frothed into the cup

Before using the cappuccinatore for

the first time, wash it either in the

dishwasher or with hot water and

liquid dish soap.

Pulled out: Milk is frothed into the

cappuccinatore

When milk is frothed in the

cappuccinatore the froth is hotter

and has more volume.

See "Cleaning and care".

When frothing milk into a cup while

dispensing a coffee, the steam

system must be turned on. See

"Settings - Steam system".

The steam supply is temporary. If

the steam stops and there is not

enough froth prepared, push the

steam lever up then down again.

Above the handle on the

cappuccinatore there is a valve a, and

a milk spout b on the side.

Cold milk is best for creating froth.

The steam is regulated by turning the

valve.

Left: hot milk is prepared

Right: froth is prepared

Be sure not to set the valve between

these two settings - this may cause

the milk to splatter.

Making coffee / espresso

Frothing milk into a cup

Preparing a cappuccino

^ Prepare frothed milk in a cup.

^ Place the cup of frothed milk under

the coffee dispenser.

^ Pre-warm the cup before filling with

froth.

^ Push the cappuccinatore spout all

the way into the lid.

^ Use the drink selection "r" touch

control to select Espresso.

^ Turn the valve all the way to the right.

^ Fill the cappuccinatore a no higher

than the upper mark with cold milk

and cover with the lid on.

^ Select OK.

Espresso now flows through the coffee

dispenser and the cappuccino is ready.

^ Place the cappuccinatore in the inset

on the drip tray, and the cup b

under the spout.

^ Slowly press the steam lever down.

The steam lever must click into the

down position - otherwise the valve is

not properly connected to the

cappuccinatore.

^ Push the steam lever up when

enough froth is prepared.

Making coffee / espresso

Frothing milk in the cappuccinatore

Heating milk

^ Fill the cappuccinatore to the upper

mark with cold milk and put the lid

on.

^ Turn the valve all the way to the left

for heating.

^ Push the milk spout all the way in (hot

milk in the cup) or pull the milk spout

out (hot milk in the cappuccinatore)

and place the cappuccinatore into

the recess in the drip tray.

^ Pull the cappuccinatore spout into

the "out" position.

^ Turn the valve all the way to the right

for frothing.

^ Fill the cappuccinatore to the lower

marking a with cold milk and cover

with the lid.

^ Slowly press the steam lever down

and carefully "connect" the valve to

the cappuccinatore.

^ Place the cappuccinatore in the inset

on the drip tray.

^ Slowly press the steam lever down.

The steam lever must click into the

down position - otherwise the valve is

not properly connected to the

cappuccinatore.

^ Push the steam lever up when

enough froth is prepared.

Making coffee / espresso

Rinsing the lid

After use

For a quick cleaning between uses of

the cappuccinatore the lid can be

rinsed with the steam valve.

If you do not wish to rinse the lines

automatically, they should be flushed

manually before turning the machine off

for the day.

This rinsing does not replace the

cleaning of the cappuccinatore in a

dishwasher.

When a coffee beverage is prepared,

the unit always rinses once before it

switches itself off. For this, it is best to

place a container underneath the

beverage nozzle and the steam vent.

Maintenance

K1 K2 K3 K4 K5

G k

The lines can also be rinsed manually

(see "Cleaning and Care" - "Rinsing the

System").

^ Select maintenance "G" using < or

^ Select "Rinse Cappuccinatore" and

confirm with OK button.

^ Push the cappuccinatore spout "in".

^ Place an empty cup under the

cappuccinatore spout.

^ Press the steam lever down.

The following appears in the display.

Cappuccinatore being rinsed

Hot water now runs through the lid and

flushes it clean. The process will stop

automatically when the lid is rinsed.

Setting serving sizes

The flavor of the coffee depends on the Setting the serving sizes using the

coffee type and the quantity of water

used. To ensure the machine uses

exactly the amount of water to suit your

taste and your cup size, use this feature

to program the water amount used.

OK button

^ Place the cup you will be using to set

the portion size under the dispenser

for the corresponding beverage type.

^ Use the drink selection r touch

control to select the desired

You can set the serving sizes for

espresso, coffee, and hot water.

beverage type (coffee or espresso)

or select Hot water o using < or >.

The Espresso is a standard size

espresso, for an espresso cup.

^ Press and hold OK until "Prog. the

amount" appears in the display.

The Coffee is a standard size coffee. It

uses the same quantity of coffee as an

espresso, but adds more water.

^ Once the cup is filled to your desire,

tap OK again to save the portion size.

Regardless of the chamber selected

or the type of coffee being prepared

all drinks will be dispensed using the

programmed serving size.

The programmed amount will now be

dispensed every time the drink set is

prepared, no matter which chamber or

coffee type is selected for the coffee

drinks.

The water flow stops automatically

when it reaches the maximum

amount possible.

The maximum water amount will

then be saved for the drink selected.

If the water tank becomes empty

while setting the serving size, the

process is canceled and the size is

not saved.

Setting serving sizes

Setting the serving sizes via Settings

"C"

^ Place the cup you will be using to set

the portion size under the dispenser

for the corresponding beverage type.

^ Select "Settings" from the main

menu. Confirm with OK.

^ Tap > until "Prog. the amount" is

highlighted, confirm with OK.

Espresso, coffee, and hot water appear

in the display.

^ Use < or > to select the beverage

type you would like to set. Confirm

with OK.

^ For coffee drinks, select the type of

coffee desired. Confirm with OK. (If

the OK button does not respond, the

chamber for the coffee type selected

is empty.)

^ Select "Start".

^ Once the cup is filled to your desire,

tap the OK button to save the portion

size.

The programmed amount will now be

dispensed every time the drink set is

prepared, no matter which chamber or

coffee type is selected for the coffee

drinks.

User profiles

Up to 9 individual user profiles can be

programmed to accommodate different

preferences and serving sizes.

See "Setting serving sizes".

Setting a user profile

To enter a new user profile.

^ Tap the < or > until "Set" is

highlighted. Confirm with OK.

User profile

You can allocate up to 9 user

profiles. If you try to allocate more

than 9 user profiles, the message

"Memory full" will appear in the

display. You will need to first erase a

name to create space for another

user profile.

K1 K1 K3 K4 K5

^ Tap the right arrow > button until user

profile "n" is highlighted. Confirm with

OK.

Several options are now available:

Selecting a user profile

In the display you will see letters and

numbers.

This option allows you to select from

user profiles which are already

allocated.

A new word will always be capitalized,

and the appliance will then switch to

lowercase letters. You can also use a

hyphen and/or empty spaces after the

first letter.

^ Use < or > to select the desired user

profile. Confirm with OK.

To show that a user profile has been

selected, the upper display line will now

show a number after the "n" symbol.

^ Use < or > to select the desired

characters.

^ Confirm each character with OK.

You will see the selected text in the

upper line of the display.

If you misspell a word, use the

arrow buttons to select the trash can

symbol. Confirm with OK. The last

entered character will be deleted.

User profiles

Saving an entry

Revert

^ When the entry is complete, use < or

> to select OK. Confirm by selecting

OK again.

The coffee system can be set so that

after each drink prepared, it will

automatically revert to the standard

user profile or retains the most recently

selected user profile.

The menu for the user profile will

appear in the display.

^ Use the arrow buttons to select the

"Revert".

Not saving an entry

^ If you do not wish to save the entry,

use < or > to select "back A".

Confirm with OK.

Select from the following options:

Manual

The following options will only

appear if you have already added a

new user profile:

The appliance stores and operates

using the selected user profile until

another user profile is selected.

^ Use < or > to select "manual".

Confirm with OK.

Changing a user profile

^ Select the user profile you wish to

change. Confirm with OK.

After each use

After each drink prepared, the

appliance automatically switches back

to the standard user profile.

^ Continue as described in "Setting a

user profile".

Deleting a user profile

^ Use the arrow buttons to select

"Default". Confirm with OK.

^ Select "Delete" and confirm with OK.

^ Use < or > to select the user profile

you wish to delete.

When switched on

Every time the appliance is turned on,

the appliance automatically selects the

standard user profile, regardless of

which user profile was set before the

machine was last turned off.

^ Confirm with OK.

A check appears after the selected

user profile, and it will be erased

shortly.

^ Select "When switched on" using the

arrow buttons. Confirm with OK.

User profiles

Making coffee / espresso with

user profiles

Setting serving sizes for user

profiles

If you have set the machine for specific You can also set different portion sizes

user profiles (see "Setting user profiles") for the remaining 9 user profiles (in

you must first select the desired user

and then the type of drink.

addition to the standard user profile).

^ Use < or > to select user profile "n".

Confirm with OK.

User profile

^ Select "Select" using < or >. Confirm

with OK.

K1 K2 K3 K4 K5

^ Select user profile "n" using < or >.

^ Use < or > to select the user profile

you wish to use to set a serving size

for. Confirm with OK.

^ Confirm with OK.

^ Select "Select" using < or >, then

select OK.

To show that a user profile has been

selected, the upper display line will

show a number after the user profile "n"

symbol.

^ Use < or > to select the desired user

profile, then select OK.

To indicate that a user has been

selected, the upper display line will now

show a number after the "n" symbol.

^ Proceed as described in the

beginning of this section.

The machine can now be operated as

usual.

All serving sizes will then apply only for

the user selected.

Settings

The coffee system can be customized

to suit individual preferences.

Time of day

^ Select "Settings F" from the main

menu. Confirm with OK.

Selecting a language

^ Tap > until "Time of day" is

highlighted, confirm with OK.

Settings F

K1 K1 K3 K4 K5

L n

Clock format

^ Select "Settings F" from the main

^ Select "Clock format" using the arrow

buttons.

menu. Confirm with OK.

"Language" is now highlighted in the

display.

^ Tap > to select a 12 or 24-hour

format.

^ Select OK.

^ Select OK when the desired clock

format is highlighted.

^ Tap < or > until the desired language

is highlighted.

The clock format has now been saved.

A total of 25 languages are available.

Setting the time of day

^ Select "Set" using < or >.

^ Tap < or > to set the hour.

^ Confirm with OK.

The setting will be automatically saved

and the display will go back to the

previous screen.

All displays will now appear in the

selected language.

^ Repeat to set the minutes.

^ Confirm with OK.

If a language is accidentally

selected, follow the flag F to return

to the language setting.

The time is now saved.

Settings

Display

Setting the timer

You can switch the time of day display

on or off:

The machine can be set to turn on or off

to suit your preference.

^ Select "Display" using the arrow

buttons.

^ Select "Settings F" from the main

menu. Confirm with OK.

Select one of the following settings:

^ Tap > until "Timer" is highlighted,

confirm with OK.

– "On": The time of day is displayed

even if the appliance is off.

^ Select "Set", confirm with OK.

– "On for 60 seconds": When the

appliance is turned off, the time of

day will remain displayed for 60

seconds.

Select one of the following options:

Switching on at a preset time

– "Not displayed": When the

appliance is turned off, the time

display immediately goes out.

A specific time can be set to turn the

machine on, e.g. for breakfast.

^ Use < or > to select "Switch on at",

confirm with OK.

A check will appear next to the

currently selected option.

^ Tap < or > to set the hour.

^ Confirm with OK.

^ Select OK when the desired display

format is selected.

^ Repeat to set the minutes.

^ Confirm with OK.

The setting will be automatically saved

and the display will go back to the

previous screen. The coffee system will

turn on at the preset time.

The timer must be activated (see

"Activate") for this function to work.

When the unit is cold, it will always

automatically rinse once when it

turns on.

With the system lock turned on, the

unit does not turn on at the specified

time.

Settings

Switching off at a preset time

If the coffee system turns on

If the coffee system can be set to turn

off automatically.

automatically three times and no

beverage is dispensed, the machine

will not turn on automatically after

that. The preset times will remain

saved and will be activated when

the machine is manually turned on

again. This is a safety measure to

ensure the machine does not turn on

daily during a longer absence.

^ Select "Switch off at" using < or >.

Confirm with OK.

^ Tap < or > to set the hour. Confirm

with OK.

^ Repeat to set the minutes. Confirm

with OK.

The appliance will turn off at the

programmed time each day.

Switching off after

The appliance can be set to turn off

automatically. This can be done via the

"Switch off after" function, a range from

15 minutes to 9 hours can be set.

The timer must be activated (see

"Activate") for this function to work.

When a beverage has been

prepared, the unit always rinses

once before turning off.

If the appliance is not used again after a

drink is prepared it will automatically turn

off after the programmed amount of time.

Activate

^ Select "Switch off after" using < or >,

confirm with OK.

^ Use < or > to select "Activate".

Confirm with OK.

^ Tap < or > to set the hour. Confirm

with OK.

Both program items "Switch on at" and

"Switch off at" are displayed.

^ Repeat to set the minutes. Confirm

with OK.

^ Use < or > to select the desired

option.

For example, if the display shows 1:00,

the appliance will turn off 1 hour after

the last drink is prepared.

Tap the OK button to activate or

deactivate the option. A check mark in

will be shown next to the selected

function.

The setting will be automatically saved

and the display will go back to the

previous screen. The coffee system will

turn off at the preset time.

^ Select "Accept" using < or >. Confirm

with OK.

^ Select "Back" using < or >. Confirm

with OK.

When a beverage has been

prepared, the unit always rinses

once before turning off.

Settings

Steam system

Lighting: Adjusting the

brightness

The appliance is equipped with 2

heating systems allowing you to

prepare steam and coffee/espresso at

the same time. If you do not use steam

frequently, it can be turned off to save

energy.

The brightness of the machine lighting

can be adjusted.

^ Select "Settings F", confirm with OK.

Settings

Lighting

Info

If the steam system is turned Off,

the appliance will only prepare

steam and coffee/espresso one after

the other.

^ Tap < or > until "Lighting" is

highlighted, confirm with OK.

^ Select "Brightness", confirm with OK.

If the steam system is Off and you

operate the steam valve, the

appliance will not product steam

until it has heated up.

^ Tap < or > to select a lighter or

darker setting.

^ Tap OK to save the setting.

If you continue to tap < all the way to

the left until you can no longer see the

small white bars, the lighting will turn

off.

As long as the appliance has not

been turned off completely, the

steam system will remain active.

^ Select "Settings F" from the main

menu. Confirm with OK.

^ Tap > until "Steam system" is

highlighted. Confirm with OK.

^ Use < or > to select "On" or "Off.

Confirm with OK.

Settings

Lighting: Setting the switch-off Display

time

The display contrast and brightness

can be adjusted.

Whenever the machine is On, the

machine lighting is also On. The

^ Select "Settings F" from the main

lighting turns off automatically when the

machine has been idle for 15 minutes.

menu. Confirm with OK.

^ Tap > until "Display" is highlighted.

Confirm with OK.

When the machine is turned off, you

can program the lighting to remain On

and to shut off automatically after a

certain amount of time if the machine is

not used

^ Use < or > to select "Contrast" or

"Brightness" as desired. Confirm with

OK.

You can choose a duration from 15

minutes to 6 hours.

^ Use < or > to set the contrast lower

or higher, or to make the display

brighter or darker.

^ Turn the machine off.

^ Confirm with OK to save the setting.

^ With the machine turned off, tap OK.

^ Select "Lighting", confirm with OK.

^ Select "Switch off after", confirm with

OK.

^ Use < or > to select an switch-off

time, confirm with OK.

^ Select "Brightness" and tap OK.

^ Tap the arrow button to increase or

decrease the brightness. Tap OK to

save the setting (Factory Setting:

Off).

^ Select "Back" symbol twice to exit the

menu.

The machine will now automatically turn

the lighting off after the programmed

amount of time.

Settings

Volume

Info (displaying No. of drinks)

The appliance can be set so a tone will

If the option "Info" is selected, the

sound each time a button touched. The display will show how many drinks the

volume of the signal tones can also be

set.

appliance has prepared to date, or how

many more drinks can be prepared

before the machine needs to be

descaled.

^ Select "Settings F" from the main

menu. Confirm with OK.

^ Select "Settings F" from the main

^ Tap > until "Volume" is highlighted.

Confirm with OK.

menu. Confirm with OK.

^ Tap > until "Info" is highlighted.

Confirm with OK.

^ Use < or > to select "Buzzer tones" or

"Keypad tone" as desired. Confirm

with OK.

^ Use < or > to select from:

"Total no. of coffees"

^ Use < or > to set the volume louder

or softer.

"No. of portions until descaling"

or the total portions of coffee,

If you tap the left arrow button < until no

more white bars are shown, the tone

will turn off.

espresso, hot water or steam.

^ Confirm with OK.

^ Select OK to return to the previous

menu.

^ Confirm with OK to save the setting.

Settings

System lock

Water hardness

The coffee system can be locked so

that it cannot be used by children or

those not familiar with the operating

instructions.

The hardness of the water used in the

coffee system must be determined and

programmed into the appliance. The

water hardness will determine how

frequently the unit must be descaled to

maintain the coffee system properly.

The machine monitors the volume of

water passing through it in conjunction

with the hardness of the water and will

indicate when descaling is necessary.

Your local water authority can tell you

the hardness of your tap water or you

can measure it yourself using the

enclosed test strip.

If the appliance is locked, the

"Switch on at" function will not work.

Activating/Deactivating the system

lock

^ Select "Settings F" from the main

menu. Confirm with OK.

^ Select "Safety" using < or >. Confirm

with OK.

^ Tap < or > until "System lock" is

highlighted. Confirm with OK.

^ Use < or > to select "On". Confirm

with OK.

The appliance is now locked and will

not operate. The display now shows a

closed padlock X and a message

whenever a button is tapped.

^ Dip the test strip in the water for

1 second and shake off any

remaining water. The result is visible

in about 1 minute.

To deactivate the system lock, follow

the same procedure as above,

selecting "Off" instead.

Temporarily deactivating the system

lock

If the water hardness is greater than

40 gr/gal (40°d), the water must be

descaled more often than displayed.

Calcium will build up faster than at a

lower water hardness and may

damage the machine.

^ Press and hold the OK button for

approx. 3 seconds.

The appliance is now temporarily

unlocked and drinks can be prepared.

As soon as you turn the coffee

system off again the lock will

reactivate.

Settings

The appliance can be set to one of 4

hardness levels:

Restore factory default

settings

– Level 1 (soft):

This option allows you to reset all saved

settings to the factory default.

0 - 3 gr/gal (0 - 3 °d)

– Level 2 (moderate):

You can select whether you wish to

reset All settings to the factory default

(Timer, Steam system, Lighting, System

lock, Water hardness, Display, most

recent coffee type selected and all

standard user profile settings) or to

delete the User profile.

4 - 7 gr/gal (4 - 7 °d)

– Level 3 (hard):

7 - 15 gr/gal (7 - 14 °d)

– Level 4 (very hard):

15 - 22 gr/gal (14 - 21 °d)

^ Select "Settings F" from the main

menu. Confirm with OK.

^ Tap < or > until "Water hardness" is

highlighted. Confirm with OK.

^ Tap < or > until "Factory default" is

highlighted. Confirm with OK.

^ Use < or >" to set the desired water

hardness. Confirm with OK.

All settings

If you select "All settings" the factory

default settings will all be restored.

The water hardness selected is now

saved.

^ Under "All settings" select the item

"Reset". Confirm with OK.

All settings will be returned to the

factory default settings.

If you inadvertently select "Reset",

turn off the appliance, the settings

will not be reset.

Settings

The coffee system is delivered with

the following factory default settings:

User profile

All user profiles entered by the user are

deleted, leaving only the standard

profile.

– Steam system (On)

– Time display (on for 60 seconds),

Clock format (24 h),

^ Under "User profile n" select "Reset".

Confirm with OK.

Timer: Turning on at (12:00),

Turning off after (1:00),

The user profiles will now be deleted.

Turning off at (12:00),

Turning on at (deactivated)

Turning off at (deactivated)

If you inadvertently select "Reset",

turn off the appliance, the settings

will not be reset.

– Lighting: Brightness (medium)

– System lock (Off)

– Water hardness (very hard 4)

– Display: Contrast (medium),

Brightness (maximum)

– Volume: Signal tones (maximum)

Button tone (maximum)

– User profile: Revert (when switched

on)

– Allocate type:

Chamber 1 = Volluto

Chamber 2 = Arpeggio

Chamber 3 = Cosi

Chamber 4 = Roma

Chamber 5 = Decaffeinato

Cleaning and care

Overview

Frequency

What needs to be done?

Every time milk is prepared if there Rinse out the lid to the Cappuccinatore

is more than one hour between

uses

Rinse the system (intake lines)

Clean the Cappuccinatore

Everyday

Clean the water tank

(at least at the end of the day,

before you switch off the

Clean the waste container

appliance)

Clean the drip tray

Clean the no spill grid

Clean the cover to the coffee dispenser

Clean capsule carousel and carousel tray

Clean the inside door tray

Once a week

(more often if there is heavy

Clean the interior

soiling)

Clean the steam vent

Clean the front of the appliance (especilly right after

descaling)

Once a month

Clean the capsule plate (use cleaning tablets)

Change the perforator

After approx 15,000 portions

Depending on water hardness

Descale the appliance

Cleaning and care

If the parts are frequently cleaned in the

dishwasher, they may become

Turn the machine off at the main

switch before cleaning.

discolored through contact with food

particles (e.g., tomatoes, etc.). This will

not affect their performance.

Allow the coffee system to cool

before cleaning. Be aware, the water

in the drip tray will be hot.

Danger of burns!

See the following pages for details of

cleaning each part.

Rinsing the System

Do not clean in the capsule plate

opening. Danger of injury.

Before turning off the appliance for an

extended period of time, flush the lines,

the brewing system, the spout and the

steam vent.

Do not clean the unit with a steam

cleaner.

When a beverage is prepared, the unit

always rinses once before turning off.

Never use abrasive cleaning agents.

These will damage the machine.

It is best to place a container

It is very important to clean the coffee

system on a regular basis.

underneath the beverage nozzle and

the steam vent while the unit is rinsing.

The following components of the coffee

system should be cleaned after each

day of use to prevent mold and

bacteria growth.

Maintenance

K1 K2 K3 K4 K5

G k

^ Tap < or > until "Maintenance G" is

highlighted. Confirm with OK.

Dishwasher safe

– Water tank

^ Select "Rinse System" and confirm

with OK.

– Drip tray with grid

– Metal drip tray

Water will now run out of the coffee

dispenser.

– Cappuccinatore (if used)

– Waste container

^ Press the steam lever down.

Water will now run out of the steam

valve.

Hand wash only with warm water and

liquid dish soap

^ Push the steam lever up after a few

seconds.

– Plastic drip tray

– Capsule plate

The lines are rinsed. Drinks can either

be prepared now or the machine may

be turned off.

Cleaning and care

Water tank

Drip tray with grid

Empty the water tank daily, and fill it

with cold fresh water shortly before you

start preparing a beverage.

Do not remove the drip tray from the

appliance for a few minutes after the

final rinse, as water will still run from

the lines.

When cleaning, check to be sure

that there is no debris in or around

the valve. This would prevent the

tank from connecting properly,

causing it to leak.

Use caution when removing the drip

tray, the water may be hot. Danger

of burns.

Clean the drip tray daily.

^ Open the appliance door and

carefully remove the drip tray from

the appliance.

^ Clean the niche of the water tank.

Waste container

^ Wash the drip tray and the grid in the

dishwasher, or by hand with a mild

solution of warm water and liquid

dish soap, then dry thoroughly.

Clean the waste container daily.

Typically there will also be some water

in the container, left over from the

brewing and rinsing processes.

^ Clean and dry the metal sensors at

the back of the drip tray. If the

sensors are soiled or wet the unit

cannot read when the drip tray is full

and needs to be emptied.

^ Slightly lift the waste container, then

pull it out of the appliance.

^ Wash the container in the

dishwasher, or by hand with a mild

solution of warm water and liquid

dish soap, then dry thoroughly.

^ Push the drip tray, with the grid

inserted, along the right hand side of

the opening and to the back of the

machine.

^ Clean the waster container niche. Be

sure to clean the sensors, left and

right, the sensors read if the waste

container is inserted and if it needs to

be emptied.

^ Close the door.

Cleaning and care

Plastic and metal drip trays

^ Lift up the tray slightly a, and pull it

all the way out b.

^ Take the plastic and metal drip trays

out of the appliance and wash them.

^ Wash the capsule carousel and tray

in the dishwasher, or by hand with a

mild solution of warm water and

Wash the plastic drip tray by hand

only.

liquid dish soap, then dry thoroughly.

Capsule carousel and tray

^ Clean the carousel niche as well. Be

sure to clean the sensor, which

selects the proper capsule

compartment, and the recess in the

floor of the niche. Dry with a soft

cloth.

^ Pull the carousel tray a out as far as

possible.

^ Lift the capsule carousel b up and

out.

^ To reinsert the tray, slide the runners

along the guide rails and push them

into the machine until they click into

place.

^ Insert the capsule carousel, the

appliance will align it automatically.

^ Slide the tray and capsule carousel

back into the appliance.

Cleaning and care

Coffee dispenser cover

Interior and appliance door

^ Open the appliance door.

Turn the machine off at the main

switch before cleaning.

^ Once all removable parts have been

taken out, clean the interior with a

mild solution of warm water and

liquid dish soap.

^ Slide the cover, in the middle of the

appliance door, upward.

^ Clean the cover in the dishwasher, or

with a mild solution of warm water

and liquid dish soap. Also clean the

inside of the door with warm water

and a mild solution of liquid dish

soap. Dry thoroughly.

^ Also clean the small drip catch in the

lower part of the inside door.

^ Slide the cover back onto the coffee

dispenser. Be sure that the cover sits

properly on the dispenser.

Cleaning and care

Capsule plate

Steam valve

The capsule plate will soil more or less

depending on the oil content of the

coffee capsule used.

The small rubber sleeve which

connects the steam valve to the

cappuccinatore can be removed for

cleaning. The sleeve as well as the

steam valve tip (underneath the rubber

sleeve) should be cleaned regularly.

Clean the capsule plate as necessary

or when the machine needs to be

descaled with the supplied cleaning

tablets. The cleaning tablets can be

purchased from Miele.

^ Press the steam lever down and pull

off the rubber sleeve.

^ Press the checkered portion, a,

down and pull the capsule plate, b,

out.

^ Clean the rubber sleeve and the

steam valve tip with a mild solution of

warm water and liquid dish soap.

^ Dissolve one cleaning tablet in hot

water.

^ Reattach the rubber sleeve firmly on

the steam valve tip. Be sure it is

seated correctly.

^ Place the capsule plate in the

solution and let it soak for one hour.

^ Rinse thoroughly and dry the capsule

plate.

^ Push the steam lever up

^ Insert the capsule plate back into the

machine until it clicks into place.

If the steam valve is down when the

door is closed, it could cause

damage.

Cleaning and care

Exterior

To better maintain your appliance

avoid the following:

If soiling is not removed promptly it

could cause the surface of the

machine to alter or discolor. Be sure

to remove soiling immediately.

– cleaners containing soda, ammonia,

thinners, or chlorides

– cleaners containing descaling

agents or lime removers,

^ Turn off the machine using the On/Off

button.

– abrasive cleaners,

– stainless steel cleaners,

– caustic (oven) cleaners,

^ The front of the appliance can be

cleaned with a sponge and a solution

of warm water and non abrasive

– scouring pads, steel wool, hard

brushes,

liquid dish soap. Dry with a soft cloth.

Only use a slightly damp sponge

when cleaning the controls. Water

could penetrate into the electronics

and cause damage.

– metal scrapers.

Wipe any spills from descaling im-

mediately!

The external surfaces of the coffee

machine are susceptible to scratching.

Scratches on the glass surface could

also weaken the glass making it more

susceptible to breakages.

Glass cleaners may be used to

clean the exterior. However do not

allow them to sit or "puddle", this can

cause damage to the surface.

Remove the cleaner promptly.

Cleaning and care

Cappuccinatore

Clean the cappuccinatore after every

use, otherwise it may become blocked

with dried milk and hard to clean.

The cappuccinatore can be

disassembled into parts for thorough

cleaning. For best results, use a

dishwasher - all parts are

dishwasher-safe.

^ Re-assemble the lid as shown in the

illustration.

When replacing the valve be sure the

dot is facing the upper right.

^ Separate the lid, remove all parts and

clean.

To remove the valve, the dot needs to

be in the 12 o'clock position

(between the hot milk and froth

symbols).

Be sure that the parts are

assembled properly e.g., no gap

between each half of the lid.

Be sure that the re-assembled lid is

seated correctly on the pitcher. The

valve belongs over the handle of the

cappuccinatore. If the valve is in the

wrong position, the cappuccinatore

will not work properly.

Cleaning and care

Maintenance

The perforator should be changed after

15,000 cups of coffee / espresso. The

perforator can be purchased from Miele.

It is recommended to contact the

Miele Service department for

assistance in performing this

maintenance task.

^ Insert the tool (supplied) up into the

unit, a. Turn it to the left, b, to

loosen and remove the perforator

Settings F

K1 K2 K3 K4 K5

^ Select "Settings F" from the main

menu. Confirm with OK.

^ Tap < or > until "Maintenance" is

highlighted. Confirm with OK.

^ Select "Carry out". Confirm with OK.

The appliance is now lowers the

perforator. The display then reads:

i Remove capsule plate and change

the capsule hopper

^ Screw the new perforator firmly into

the unit. The spring and ball must be

inserted in the perforator opening so

that the ball is on top.

^ Open the appliance door.

^ Pull the capsule plate out.

^ Insert the rubber connector from the

bottom up (with the funnel pointing

downwards).

Do not reach up into the perforator

opening. Danger of injury!

^ Insert the capsule plate and close the

door.

^ Pull the rubber connector down and

out.

Descaling the coffee system

The coffee system must be descaled

regularly. The time period depends on

the water hardness set. The appliance

will display a reminder message and

will eventually lock if not descaled.

Only use the enclosed descaling

tablets for descaling. The descaling

tablets are specially designed for

this coffee system. Descaling tablets

can be purchased from Miele.

Other agents may damage the

machine and affect the taste of the

coffee and hot water.

Once the system is at the point where

only 50 drinks can be prepared before

descaling must be performed, the

display will show the message: No. of

portions until descaling: 50.

Be sure that the correct mixture of

descaling agent and water are used

to prevent damage to the machine.

This message will appear and

countdown after each drink until

descaling needs to be completed.

^ Select OK to acknowledge the

message.

To prevent damage to the exterior

wipe up any descaling solution

spills immediately!

Once the counter reaches 0 the

appliance can only be used again once

descaling is performed, the display

reads "Descale - Start".

Thoroughly clean the water tank and

the drip tray of descaling residue.

Descale

Start

^ Select OK.

To descale the machine, you will need

descaling tablets and the colored

descaling funnel.

Descaling the coffee system

The descaling cannot be interrupted

once the OK button has been

pressed. The process must be

allowed to run through to

completion.

This is a safety feature to ensure the

process will be completed.

^ When the message appears in the

display, remove the capsule plate

and replace it with the colored

descaling funnel.

Descaling is important to increase

the life of the machine and to ensure

the best results possible.

^ Place the waste container under the

steam valve and coffee dispenser to

collect the waste water.

The display will guide you through the

descaling process. Follow the prompts

(for example, empty drip tray, fill water

tank, etc.).

There will be at least 5 minutes

before the descaling process starts.

This time is needed for the

Do not skip any steps or remove a

part unless prompted by the

descaling tablets to completely

dissolve in the water. If the process

takes longer than 5 minutes to start,

the appliance is too warm.

display. This will cause the program

to fault and descaling will restart.

^ Remove the water tank and fill it to

the mark k with lukewarm water.

(Do not under fill the water tank, this

will cause the descaling process to

end prematurely.)

During the descaling process, a small

amount of water and descaling agent

will exit the steam valve and coffee

dispenser. This is followed by an

activation period, before more

^ Add 2 descaling tablets to the

water. Allow the descaling tablets

dissolve completely, before closing

the lid and placing the water tank

back into the appliance.

descaling agent is drained. A message

in the display will appear to let you

know approximately how long the

descaling process will take.

Descaling the coffee system

^ When the display prompts you to add Descaling before prompted

fresh water to tank, rinse the tank

Descale

throughly with fresh water, and fill to

the k mark with fresh water.

Also empty the Waste container at

this time.

K1 K1 K3 K4 K5

^ Use < or > to select Descale "k" .

k C

^ Select OK to begin the descaling

process.

During rinsing, water will flow from both

nozzles. The drip tray will need to be

emptied several times during this

process.

When the descaling process is

complete Program finished will appear

in this display.

The appliance will then run a short

rinse, after which it can be used as

usual.

Frequently asked questions

,^{Repairs to electrical appliances should only be carried out by a suitably}

qualified person in accordance with local and national safety regulations.

Repairs and other work by unqualified persons could be dangerous.

Machine problems

The light does not illuminate when the appliance is turned on.

Possible fault

Solution

The lighting is turned off.

Turn on the lighting, see "Settings - Lighting".

If not, the light bulb has burnt out.

Contact Miele's Technical Service Department.

The display remains dark.

Possible fault

Solution

The unit has no power.

– The main switch is turned off.

– The machine is not plugged in.

– Check that the fuse had not blown or is

defective. If the fuse has blown contact Miele's

Technical Service Department.

The unit suddenly turns off.

Possible fault

Solution

– Is the machine

– The machine goes into standby mode when

not used for a programmed time. See "Settings

Switch off after".

programmed to switch off

after a programmed time?

– Is the machine plugged in? – Plug in the machine.

The lighting suddenly turns off.

The lighting turns off automatically if the machine has not been used for 15

minutes.

Frequently asked questions

The coffee system does not turn on, even though the "Turn on at" setting

has been activated.

Possible fault

Solution

– The system lock has been activated. – Deactivate the system lock, see

"Settings - System lock".

– The machine was not used 3 times in – Turn on the appliance manually and

a row after the automatic turn on.

use as normal.

The display is hard to read.

Adjust the contrast and/or brightness of the display, see "Settings - Display".

The door will not open or close.

Possible fault

Solution

The steam valve is not in the correct

position.

Push the steam valve down, then pull it

upwards as far as it will go.

The time of day needs to be reset.

Possible fault

Solution

The machine was unplugged or a

power failure occurred.

Reset the time of day, see "Settings -

Time of day".

The preset times for turning on or off

automatically are saved and do not

need to be reset.

Frequently asked questions

Preparing / Dispensing problems

No beverage is prepared although there are coffee capsules in the carousel

and there is enough water in the water tank.

Possible fault

Solution

– The water tank is not sitting – Reseat the water tank.

properly in the appliance.

– A coffee capsule is jammed – Open the appliance door.

in the carousel.

– Pull the carousel tray out, lift out the capsule

carousel and make sure all capsules can

move easily.

– Reinsert the carousel in the tray and push it all

the way in.

– Close the door.

No hot water or steam is dispensed from the steam valve.

Possible fault Solution

– The water tank is not sitting – Reseat the water tank.

properly in the appliance.

– The steam valve is blocked. – Open the appliance door.

– Press the steam lever down and pull off the

rubber sleeve.

– Using the small end of the provided tool

unscrew the top of the steam valve

counterclockwise.

– Clean the tip and screw it on again.

Steam and coffee / espresso cannot be prepared simultaneously.

Possible fault

Solution

The steam heating system is

turned off.

If the steam system is turned off steam and

coffee cannot be dispensed at the same time.

To turn the steam system on, see "Settings -

Steam system".

Frequently asked questions

Although the steam heating system is turned off, it is still possible to

simultaneously prepare espresso / coffee and steam.

Possible fault

Solution

Steam can be dispensed as long as Once cooled the system will no longer

the steam heating system is warm.

dispense steam.

The steam smells like rubber.

The rubber odor will wear off with time and usage.

The cappuccinatore does not dispense milk froth.

Possible fault

Solution

– The spout turned to the side so

that froth can only be prepared in

the cappuccinatore.

– Turn the spout to the cup.

– The valve and the froth dispenser – See "Cleaning and care".

of the cappuccinatore are not

properly inserted in the lid.

– Are any single parts of the

cappuccinatore clogged?

– Clean the cappuccinatore.

The coffee dispensing is interrupted.

Possible fault

Solution

If a double espresso / coffee was

selected the machine uses two

coffee capsules.

Dispensing is interrupted when the

carousel chambers are empty. Refill

coffee capsules.

The appliance does not rinse when turned on.

If the appliance is at a temperature of 140°F (60°C) or above, the rinse feature

will not work.

The drip tray is empty but there is still a repeated prompt to empty it.

Possible fault

Solution

– The contacts are wet and or dirty. – Check the drip tray contacts.

– Is the drip tray inserted properly? – Reinsert the drip tray.

– Using the main switch turn the

appliance off the on again.

If the message persists contact Miele

Technical Service Dept.

Frequently asked questions

Coffee results

The dispensed coffee has ground coffee in it.

Possible fault

Solution

The capsule plate is soiled.

Clean the capsule plate, see "Cleaning

and Care".

The water flow stopped while the quantity was being programmed.

Possible fault

Solution

– If the maximum water amount is

reached, the water dispensing stops

automatically. The maximum water

amount is saved.

– There was not enough water in the

tank. The dispensed water amount

will not be saved.

– Refill the water tank and reset the

serving size.

The preparing time and amount of coffee is very different.

Depending on coffee type the grind level will differ between coarse and fine.

Preparing time and amount will vary.

The espresso / coffee is not hot enough.

Possible fault

Solution

– Check if the capsule plate is

clogged.

– Clean the capsule plate.

– Pre-warm the cup.

The coffee is too weak.

Possible fault

Solution

– Check the water amount saved in the – Adjust if necessary.

memory per coffee.

– After 15,000 cups of coffee the

perforator needs to be replaced.

– See "Cleaning and care -

Maintenance".

Frequently asked questions

There is water in the waste container.

This is not a fault. This is residual water from the brewing and rinsing processes.

There is "coffee water" in the waste container.

Possible fault

Solution

The capsule plate is not inserted

correctly.

Reinsert the capsule plate.

The descaling process was started accidently.

The descaling process cannot be stopped once the OK button has been

pressed. The process now needs to be completed as a safety measure.

Descaling is important to increase the life of the machine and to ensure the best

possible results. See, "Descaling".

The heat-up time has gotten longer, the water flow amount is incorrect and

the machine is not performing properly.

The machine needs to be descaled. See, "Descaling before prompted".

Frequently asked questions

"Fault" messages

The message "Push water container right in" appears in the display.

Possible fault Solution

– No water can be pumped – Fill the system with water. See "Before using the

from the water tank.

coffee system for the first time".

– Remove and reinsert the water tank.

– This message also shows – Refill to the mark and restart descaling.

if the water tank was not

– If the message still shows, contact Technical

filled correctly during

Service.

descaling.

One of the messages F 72, F 75 or F 76 appears in the display.

See "Removing a jammed capsule".

One of the messages F 73, F 74 or F 77 appears in the display.

– Follow the instructions in the display if necessary.

– Turn off the appliance, wait a few seconds, then turn it back on.

If the problem persists, contact Miele's Technical Service Department.

Removing a jammed capsule

,Turn the machine off at the main switch in the upper left corner. Danger of

electric shock. The machine must be turned off before performing the next

steps.

What if F 72 appears in the display?

A capsule has jammed between the

capsule plate and the capsule

carousel.

If the carousel cannot be pulled out :

^ Attempt to remove the capsule plate.

^ Look into the brew unit, attempt to

remove and dispose of the damaged

capsule.

^ Open the appliance door.

Turn off the appliance with the main

switch.

^ Push in the capsule plate.

^ Return all parts to the machine, then

use the main switch to turn the

appliance back on again.

^ Attempt to pull out the carousel tray.

If the carousel tray could be pulled

out, remove and dispose of the

damaged capsule.

^ Close the door and follow the

instructions in the display.

^ Clean the carousel tray niche.

Thoroughly clean the sensor and the

recess in the floor. Dry with a soft

cloth.

If the fault still appears in the display or

the damaged capsule could not be

removed easily, contact Technical Ser-

vice.

^ Return all parts to the machine, then

use the main switch to turn the

appliance back on again.

^ Close the door.

Removing a jammed capsule

What if F 75 appears in the display?

The coffee capsule rests on the

capsule plate.

The waste container sensors are dirty.

^ Open the appliance door.

^ Remove the waste container and

clean the niche, paying special

attention to the sensors on the left

and right hand sides.

Turn off the appliance with the main

switch.

^ Remove the carousel tray and the

capsule plate from the machine.

^ Place the waste container back in the

niche.

The coffee capsule was not pushed

onto the capsule plate.

^ Remove the carousel tray and

capsule plate from the machine.

^ Clean the capsule carousel niche.

Thoroughly clean the sensor and the

recess in the floor. Dry with a soft

cloth.

^ On the right side of the capsule plate

is an opening. Check if a coffee

capsule has jammed there.

^ Return all parts to the machine, then

use the main switch to turn the

appliance back on again.

^ Use a wooden spoon handle (only) to

push the capsule into the waster

container.

^ Close the door.

^ Return the capsule plate, carousel

tray and capsule carousel to the

machine.

^ Turn the appliance on with the main

switch.

^ Close the appliance door and follow

the instructions in the display.

If the fault still appears in the display or

the damaged capsule could not be

removed easily, contact Technical Ser-

vice.

Removing a jammed capsule

What if F 76 appears in the display?

No coffee capsule is seen on the

capsule plate, because it is stuck in the

brew unit.

The coffee capsule was not pushed

correctly onto the capsule plate and is

possibly damaged.

^ Open the appliance door.

Turn off the appliance with the main

switch.

Turn off the appliance with the main

switch.

^ Remove the carousel tray, capsule

plate and capsule plate from the

machine.

^ Remove the carousel tray and the

capsule plate from the machine.

^ Check to see if a capsule is lodged in

the top of the brew unit.

^ On the right side of the capsule plate

is an opening. Check if a coffee

capsule has jammed there or further

up in the brew unit.

^ Use a wooden spoon handle (only) to

dislodge the coffee capsule.

^ Return the capsule plate, carousel

tray and capsule carousel to the

machine.

^ Use a wooden spoon handle (only) to

push the capsule into the waster

container.

^ Turn the appliance on with the main

switch.

^ Turn the appliance back on with the

main switch.

^ Close the appliance door and follow

the instructions in the display.

^ Close the door and follow the

instructions in the display.

If the fault still appears in the display or

the damaged capsule could not be

removed easily, contact Technical Ser-

vice.

After sales service

In the event of a fault which you cannot MieleCare

easily fix yourself, please contact the

(USA only)

Miele Technical Service Department at

the contact information on the back of

this booklet.

MieleCare, our Extended Service

Contract program, gives you the

assurance of knowing that your

When contacting the Technical Service

Department, please quote the model

and serial number of your appliance

given on the data plate inside the

appliance.

appliance investment is covered by

5 years of worry free ownership.

MieleCare is the only Extended Service

Contract in the industry that guarantees

repairs by a Miele Authorized Service

Provider using genuine Miele parts.

Only genuine Miele parts installed by

factory trained professionals can

guarantee the safety, reliability, and

longevity of your Miele appliance.

Please note that unless expressly

approved in writing by Miele’s Service

department, Extended Service

Contracts offered by other providers for

Miele products will not be recognized

by Miele. Our goal is to prevent

unauthorized (and untrained) service

personnel from working on your Miele

products, possibly doing further

damage to them, you and/or your

home.

To learn more about MieleCare

Extended Service Contracts, please

contact your appliance dealer or visit

us online at:

http://miele.com/mielecare

Installation instructions

Caring for the environment

Disposal of packing material

Disposal of an old appliance

The cardboard box and packing

materials protect the appliance during

shipping. They have been designed to

be biodegradable and recyclable.

Please recycle.

Old appliances may contain materials

that can be recycled. Please contact

your local recycling authority about the

possibility of recycling these materials.

Ensure that the appliance presents no

danger to children while being stored

for disposal. Before discarding an old

appliance, unplug it from the outlet, cut

off its power cord and remove any

doors to prevent hazards.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of children.

Danger of suffocation!

Electrical connection

Important

Ensure that power is not supplied to

the machine while installation or

maintenance work is performed.

The coffee system comes equipped

with a 6 ft (1.8 m) power cord with a

NEMA 5-15P molded plug for

connection to a 120 V, 15 A, 60 Hz

power supply.

All electrical work should be

performed by a qualified electrician

in strict accordance with national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous.

Verify that the voltage, load and circuit

rating information found on the data

plate match the household electrical

supply before installing the coffee

system.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or contact Miele’s

Technical Service Department. See

back page for contact information.

WARNING:

THIS APPLIANCE MUST BE

GROUNDED

Installation

Installation options

The coffee system is designed to be built into cabinetry.

Miele appliances can be installed flush or proud. Discuss your installation

requirements with your architect, designer and installer.

Installation

A combination with other Miele built in

appliances is possible. If the machine

is installed in combination with other

appliances, it should be installed with a

protective base between the appliance

and the unit (exception: installation with

a built-in plate warmer).

The feet can be turned out up to 3/8"

(10 mm).

^ If your cabinet has 3/4" (19 mm) side

walls, drill four holes for the

mounting.

^ Center the unit and turn the screws a

little bit in and then out again.

A special display cabinet is also

available from your dealer or Miele, as

an installation option.

^ Take the unit out of the niche and drill

four holes at the screw markings

(1/16" [2 mm], diameter 3/16"

[4.5 mm]).

Installation

Make sure power is not supplied to

the appliance while installation or

maintenance work is performed.

Disconnect the power supply to the

work area by unplugging the unit,

tripping the circuit breaker or

removing the fuse. The coffee

system must be properly installed

before being used.

^ Plug the appliance into the electrical

outlet.

This unit should only be used in

room temperatures ranging between

59°F and 140°F (15°C and 60°C).

^ Push the appliance into the niche.

^ Open the door and partially tighten

the screws.

^ Carefully turn the lower screws, a, to

center the machine.

^ To secure the appliance in the

cabinet, tighten the upper screws, b,

by hand. Do not use an electric

screwdriver.

^ Push the appliance all the way back

into the cabinet and center it. If

necessary level the unit with the four

height adjustable feet.

Coffee glossary

Caffè is the Italian term for a standard

Cappuccino scuro is a "dark"

cappuccino with more espresso and

less hot milk.

espresso.

Caffè americano is a thin espresso

with water added.

Cappuccino senza schiuma is a

cappuccino without the froth.

Caffè corretto is espresso with a

splash of liquor.

Crema is the sign of the perfect cup of

espresso - a fine, nut or cinnamon

brown foam on the surface of the

espresso, which is only created when

the pressure is sufficiently high. The

crema contains foamed oils which are

rich in flavor and aroma.

Caffè freddo is iced coffee. An

extended version of espresso served

with ice.

Caffè latte is a double espresso in a

large cup filled with hot milk, topped

with little or no foam.

Espresso, see Caffè.

Caffè moca consists of equal parts of

Espresso corto is a "short", strong

espresso, hot milk and cocoa.

espresso.

Caffè ristretto is the strongest most

concentrated espresso. The water is

reduced to 2 tablespoons (30 ml) per

serving.

Espresso doppio is a double portion of

normal espresso.

Espresso lungo is the longer, less

concentrated version served in a stan-

dard coffee cup.

Caffeine - the caffeine content of

espresso is only a third or half of that

found in coffee. The stronger the roast,

the less caffeine the espresso will

contain.

Espresso ristretto is a double

strength, bitter tasting espresso.

Macchiato is espresso with a dollop of

hot, foamed milk giving a dappled

(macchiato) appearance.

Cappuccino is espresso with frothed

milk. It is equal parts of espresso, hot

milk and foam.

Pre-warming the cup is recommended

to prevent the espresso from cooling

too quickly.

Cappuccino chiaro is a "light"

cappuccino with less espresso and

more hot milk.

The Espresso range

Ristretto (black)

Livanto (copper brown)

is the typical Italian espresso. It is a

short, strong, full-bodied espresso with

a touch of acidity. It has a pleasantly

lingering taste.

A very well balanced blend, Livanto is

characterized by a dense and velvety

aroma. It is a uniquely rounded

espresso.

Strength: 10

Strength: 6

Ideal cup size: Espresso, 1/2 Espresso

or Cappuccino

Ideal cup size: Espresso

Capriccio (dark green)

Arpeggio (dark purple)

is a full-bodied espresso, which is also

creamy, mild and rich. Its crema is very

dense, and so delicate that it reflects

the light.

is a Mediterranean blend par

excellence with a strong character,

intense body and long exquisite

after-taste. Its thick, smooth crema

remains to the last sip.

Strength: 5

Ideal cup size: Espresso

Strength: 9

Volluto (yellow gold)

Ideal cup size: Espresso, 1/2 Espresso

or Cappuccino

Lightly roasted but full-bodied, Volluto’s

flavor is round and fresh with a cereal

hint. Volluto’s character is reinforced by

Roma (dark gray)

With its sweetness and its woody notes, a touch of acidity.

Roma is the ideal coffee for a short

Strength: 4

espresso that is not too strong.

Ideal cup size: Espresso

Strength: 8

Cosi (dark brown)

Ideal cup size: Espresso or 1/2

Espresso

is perfect for espresso lovers who enjoy

a mild, smooth crema coupled with the

refreshing acidity of a hint of lemon.

Decaffeinato Intenso (brick red)

An intense, rich taste with slightly

elevated acidity gives this

Strength: 3

Ideal cup size: Espresso

decaffeinated coffee all the strength of

a true espresso.

Decaffeinato (red)

This is the lighter and creamier

decaffeinated blend, offering a rich and

delicate balance between mildness and

acidity. Decaffeinato’s crema is

distinguished by its hazel color and

consistent texture in the mouth.

Strength: 7

Ideal cup size: Espresso

Strength: 2

Ideal cup size: Espresso

The "Pure Origin" Espresso range

Indriya from India (sage)

Dulsão do Brasil (gold)

This intense bodied espresso is a blend With its sweet notes of cereal, malt,

of Arabica and Robusta from Southern

India. Its sustained but quick roasting

balances its strong character, bringing

out cocoa and spicy notes of clover,

pepper and nutmeg. Indriya expresses

all its passion in a half espresso cup

(25 ml).

honey and maple syrup, Dulsão do

Brasil's combination of separately

roasted yellow and red Brazilian

Bourbon coffees creates a roundness

on the palate. These varieties are

treated with the semi-dry method so

that the mucilage sugars infuse their

sweetness to the coffee beans' heart.

Strength: 10

Ideal cup size: Espresso, 1/2 Espresso

or Cappuccino

Strength: 5

Ideal cup size: Espresso

Rosabaya de Colombia (rose)

On a soft base, this blend of Colombian

Arabicas deploys typical notes of red

fruits jam, and echoes winey flavours.

Grown on small Colombian plantations,

the coffee is handpicked and prepared

using the wet method. Separate

roasting accentuates the fruity notes

and acidity whilst bringing body to the

coffee.

Strength: 6

Ideal cup size: Espresso

The Lungo range

Fortissio Lungo (teal)

Finezzo (butter yellow)

This full-bodied Lungo is characterised

by notes of dark-roasted beans. A

blend of Central and South American

Arabicas with a hint of Robusta,

Fortissio Lungo offers a delicious

bitterness and an exquisite fullness on

the palate.

This light and thirst-quenching Lungo

expressses a floral bouquet of jasmine,

orange flower and bergamot. A lightly

roasted blend of floral East African

Arabicas and scented Arabicas from

South and Central America, Finezzo

Lungo is refreshed by a touch of

acidity.

Strength: 7

Ideal cup size: Lungo

Strength: 3

Ideal cup size: Lungo

Vivalto (sky blue)

is an intense Lungo which combines a

beautifully roasted and floral notes. Its

crema is notable for its smooth texture.

Equally delicious prepared with milk.

Strength: 6

Ideal cup size: Lungo

Decaffeinato Lungo (coral)

has a consistent body and a delicious

texture on the palette. Its slow and

consistent roasting reveals a delicious

roasted flavor.

Strength: 5

Ideal cup size: Lungo

Alteration rights reserved / 1609

CVA 2662

M.-Nr. 07 357 080 / 04

For the most updated manual please see the Miele web site.

Motorola MOTORAZR2 V9x User Manual
Motorola KRZR K1m User Manual
Motorola i425 User Manual
Microsoft Windows Small Business Server 2011 2VG00202 User Manual
LG Electronics VX9400 User Manual
Hamilton Beach 46924 User Manual
Clarion M235 User Manual
Boston Acoustics DSI265 User Manual
Audiovox CE147 User Manual
Alcatel Carrier Internetworking Solutions One Touch 835 User Manual