JVC KD SH9103 User Manual

CD RECEIVER

CD-RECEIVER

RECEPTEUR CD

CD-RECEIVER

KD-SH9104/KD-SH9103/

KD-SH9102/KD-SH9101

ATT

ANGLE

DAB

DISC

PRESET

KD-SH9101

MOSFET

SRC

DISC

DISP

T/P

AUX

SEL

ATT

VOLUME

MODE

SEL

RM-RK100

This unit is equipped with the display demonstration. To cancel it, see page 8.

Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf

Seite 8 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.

Cet appareil est équipé d’une démonstration des affichages. Pour l’annuler, référez-

vous à la page 8.

Dit toestel heeft een display-demonstratiefunctie. Zie bladzijde 8 voor het annuleren

van deze functie.

For installation and connections, refer to the separate manual.

Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.

Pour l’installation et les raccordements, se référer au manuel séparé.

Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het

toestel.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

LVT1005-001B

[E/EX]

Position And Reproduction Of Labels

Bottom panel of the main unit

CAUTION: Invisible laser ADVARSEL: Usynlig laser- VARNING: Osynlig laser- VARO: Avattaessa ja

radiation when open and stråling ved åbning, når strålning när denna del är suojalukitus ohitettaessa

interlock failedor defeated. sikkerhedsafbrydere er ude öppnad och spärren är olet alttiina näkymättö-

AVOIDDIRECT EXPOSURE af funktion. Undgåudsæt- urkopplad. Betrakta ej mälle lasersäteilylle.

TO BEAM.

(e) telse for stråling.

(d) strålen.

(s) Älä katso säteeseen. (f)

IMPORTANT FOR LASER PRODUCTS

Precautions:

Name/Rating plate

1.CLASS 1 LASER PRODUCT

2.CAUTION: Invisible laser radiation when open and

interlock failed or defeated. Avoid direct exposure to

beam.

3.CAUTION: Do not open the top cover. There are no

user-serviceable parts inside. Leave all servicing to

qualified service personnel.

CLASS

LASER

PRODUCT

4.CAUTION: This CD player uses invisible laser radiation

and is equipped with safety switches to prevent

radiation emission when unloading CDs. It is dangerous

to defeat the safety switches.

Caution:

This product contains a laser component

of higher laser class than Class 1.

5.CAUTION: Use of controls, adjustments or performance

of procedures other than those specified herein may

result in hazardous radiation exposure.

Note:

For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on

the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.

CAUTION:

NEVER insert

How to reset your unit

Press the reset button on the control panel using a

your finger in

ball-point pen or similar tool.

between the

This will reset the built-in

microcomputer.

control panel and

the unit, as it may get

caught or hurt.

(See page 52.)

T/P

Note:

MODE

Your preset adjustments—such as

preset channels or sound

adjustments—will also be erased.

BEFORE USE

*For safety....

*Temperature inside the car....

If you have parked the car for a long time in hot or

cold weather, wait until the temperature in the car

becomes normal before operating the unit.

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ..............................

SOUND ADJUSTMENTS .................. 37

Performing the basic sound settings ........ 37

LOCATION OF THE BUTTONS ...........

Control panel............................................

Remote controller.....................................

Preparing the remote controller ................

GRAPHIC DISPLAYS ...................... 39

Downloading images and animations ...... 40

Deleting unwanted files ............................ 42

Activating the downloaded images and

BASIC OPERATIONS ......................

Turning on the power ...............................

Canceling the display demonstration .......

Setting the clock.......................................

Selecting the level meter..........................

animations ............................................. 44

OTHER MAIN FUNCTIONS ............... 46

Changing the general settings (PSM) ...... 46

Selecting the dimmer mode ..................... 50

Assigning names to the sources .............. 51

Changing the control panel angle ............ 52

Detaching the control panel ..................... 53

RADIO OPERATIONS ..................... 10

Listening to the radio................................ 10

Storing stations in memory ...................... 12

Tuning in to a preset station ..................... 13

Changing the display pattern ................... 14

CD CHANGER OPERATIONS ............. 54

Playing discs ............................................ 54

Locating a folder on a disc ....................... 57

Selecting a disc/folder/track using

RDS OPERATIONS ........................ 15

What you can do with RDS ...................... 15

Other convenient RDS functions and

the name lists ........................................ 58

Selecting playback modes ....................... 59

adjustments ........................................... 20

EXTERNAL COMPONENT OPERATIONS .... 61

CD OPERATIONS .......................... 22

Playing an external component................ 61

About MP3 and WMA discs ..................... 22

Playing a disc ........................................... 22 DAB TUNER OPERATIONS ............... 62

Locating a particular portion on a track ..... 24

Locating a track on a disc ........................ 25

Locating a folder on a disc ....................... 26

Selecting a folder and a track using the

name lists .............................................. 28

Selecting playback modes ....................... 29

Prohibiting disc ejection ........................... 30

Changing the display pattern ................... 31

Tuning in to an ensemble and one of the

services ................................................. 62

Storing DAB services in memory ............. 64

Tuning in to a preset DAB service ........... 64

What you can do more with DAB ............. 66

Changing the display pattern ................... 70

ADDITIONAL INFORMATION ............ 71

TROUBLESHOOTING ..................... 72

DSP OPERATIONS ........................ 32

Selecting the DSP modes ........................ 32

MAINTENANCE ............................ 74

EQUALIZER OPERATIONS ............... 35

Selecting preset sound modes

Handling discs.......................................... 74

SPECIFICATIONS .......................... 75

(iEQ: intelligent equalizer) ..................... 35

Storing your own sound modes ............... 36

Caution:

If the temperature inside the car is below 0°C, the

movement of animation and text scroll will be

halted on the display to prevent the display from

CAUTION on Volume Setting:

Discs produce very little noise compared with

other sources. If the volume level is adjusted for

the tuner, for example, the speakers may be

damaged by the sudden increase in the output

level. Therefore, lower the volume before playing a

disc and adjust it as required during playback.

being blurred.

(LOW TEMP.) indicator

appears on the display.

When the temperature increases, and the operating

temperature is resumed, these functions will start

working again.

LOCATION OF THE BUTTONS

Control panel

SRC

DISP

T/P

ATT

MODE

SEL

1 SRC (source) button

8 •

(standby/on/attenuator) button

2 DISP (D) (display) button

• Control dial

3 5 (up) button

9 Remote sensor

p ∞ (down) button

q SEL (select) button

w Number buttons

e MODE (M) button

4/¢

5 Display window

6 • 0 (eject) button

(angle) button

buttons

•

7 T/P (traffic programme/programme type)

(control panel release) button

button

t Reset button

Illumination Navigation for easy operations:

If you use MODE (M) or SEL (select), the display and some controls (such as the number buttons,

4/¢ , 5 / ∞, and control dial) enter the corresponding control mode, then the controls

start flashing to lead you to the next operational steps. (Illumination Navigation)

• The display show how these buttons function during this period.

Ex. When you press number button 1 after pressing MODE (M), to operate the FM tuner.

Time countdown indicator

Appear only when selecting

the FM band

MODE

To use these controls for original functions again, wait until the controls stop flashing without

using these controls.

• Pressing MODE (M) again also restores original functions. However, pressing SEL (select)

makes the unit into a different mode.

7 • Searches stations while listening to the

radio.

Remote controller

• Selects ensembles while listening to the

DAB tuner.

• Fast-forwards or reverses the track if

pressed and held while listening to a disc.

• Skips to the beginning of the next track or

goes back to the beginning of the current (or

previous) tracks if pressed briefly while

listening to a disc.

ATT

ANGLE

DAB

DISC

8 • Selects services while listening to the DAB

tuner.

PRESET

• Changes the disc number while listening to

the CD changer. Each time you press and

hold the button, the disc number changes,

and the selected disc starts playing.

• Skips to the first track of a folder on a higher

hierarchy level or on a lower hierarchy level

if pressed briefly while listening to an MP3

or a WMA disc. (This does not function for

WMA discs on the MP3-compatible CD

changer).

DISC

AUX

SEL

VOLUME

RM-RK100

• Adjusts the fader level on the fader/balance

adjustment screen.

1 • Turns on the unit if pressed when the unit is

turned off.

9 • Changes the preset channel number while

listening to the radio (or the DAB tuner).

Each time you press the button, the preset

channel number changes, and the selected

station (or service) is tuned in.

• Turns off the unit if pressed and held for a

few seconds.

• Drops the volume level in a moment if

pressed briefly.

• Skips to the first track of the next folder or

the first track of the previous folder if

pressed and held while listening to an MP3

or a WMA disc.

• Skips to the first track of the next folder or

the first track of the previous folder on the

same hierarchy level if pressed briefly while

listening to an MP3 or a WMA disc. (This

does not function for WMA discs on the

MP3-compatible CD changer).

Press again to resume the volume.

2 Changes the angle of the control panel to four

positions.

3 Skips to the root while listening to an MP3

disc.

4 • CD: Selects CD player.

• FM/DAB:

– Selects FM tuner if pressed briefly.

Each time you press the button, FM band

(FM1, FM2 and FM3) changes.

– Selects DAB tuner if pressed and held.*¹

Each time you press and hold the button,

DAB band (DAB1, DAB2 and DAB3)

changes.

• Adjusts the balance level on the fader/

balance adjustment screen.

p*³Turns on or off the fader/balance adjustment

screen. Then you can adjust them using the

buttons explained above (8 and 9).

• AM: Selects AM tuner.

• CH: Selects CD changer.*¹

• AUX: Selects the external component

(LINE IN).*²

Without connecting the DAB tuner or CD

changer, you cannot select it as the source to

play.

If the “Line In” setting is changed to “Off,” you

cannot select “LINE IN” (see pages 48 and 49).

These buttons do not function in the preferred

setting mode (PSM) adjustment.

5*³• Changes the volume.

6 Selects the sound (iEQ) mode.

Each time you press the button, the sound

(iEQ) mode changes.

3. Return the battery holder.

Preparing the remote controller

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

Insert again the battery holder pushing it until

you hear a clicking sound.

(back side)

SRC

DISP

ATT

SEL

WARNING:

• Store the battery in a place where children cannot

reach.

Remote sensor

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not recharge, short, disassemble or heat the

battery or dispose of it in a fire.

Doing any of these things may cause the battery

to give off heat, crack or start a fire.

• Do not leave the battery with other metallic

materials.

• Do not expose the remote sensor to strong light

(direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the

remote controller decreases, replace the battery.

Doing this may cause the battery to give off heat,

crack or start a fire.

• When throwing away or saving the battery, wrap

it in tape and insulate; otherwise, the battery may

start to give off heat, crack or start a fire.

• Do not poke the battery with tweezers or similar

tools.

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point

pen or a similar tool.

2) Remove the battery holder.

Doing this may cause the battery to give off heat,

crack or start a fire.

(back side)

CAUTION:

DO NOT leave the remote controller in a place

(such as dashboards) exposed to direct sunlight

for a long time. Otherwise, it may be damaged.

2. Place the battery.

Slide the battery into the holder with the + side

facing upwards so that the battery is fixed in

the holder.

Lithium coin battery

(product number:

CR2025)

This receiver is equipped with the steering

wheel remote control function.

If your car is equipped with the steering

wheel remote controller, you can operate this

receiver using the controller.

• See the Installation/Connection Manual

(separate volume) for connection to utilize

this function.

BASIC OPERATIONS

Display indication:

SRC

If you have changed

some PSM items (see

pages 47 and 48), the

indications on the

display you see may be

different from those used

in this manual.

DISP

T/P

ATT

MODE

SEL

2 1, 3

3 Adjust the volume.

Turning on the power

ATT

1 Turn on the power.

ATT

Clock time

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

Current DSP mode (see page 32)

Current sound (iEQ) mode (see page 35)

2 Select the source.

4 Select the DSP mode and sound

Each time you press the button,

SRC

the source changes as follows.

mode as you want.

To drop the volume in a moment

TUNER

DAB

CD-CH

(DAB tuner)

Press

briefly while listening to any

(CD changer)

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial, you can also restore

the sound.

LINE IN

*¹Without connecting the DAB tuner or CD

changer, you cannot select it as the source to

play.

*²If a disc is not in the loading slot, you cannot

select CD as the source to play.

*³When “Line In” is set to “Off” in the PSM

setting, you cannot select “LINE IN” as the

source (see page 49).

To turn off the power

Press

for more than 1 second.

• If you turn off the power while listening to a

disc, playback will start from where playback

has been stopped previously, next time you

turn on the power.

To activate the display demonstration, repeat

the same procedure and select “Int Demo” or

“All Demo” in step 3.

• For more details, see “To show the graphics on

the display—Graphics” on page 48.

Canceling the display

demonstration

When shipped from the factory, display

demonstration has been activated, and starts

automatically when no operations are done for

about 20 seconds.

• It is recommended to cancel the demonstration

before you use the unit for the first time.

Setting the clock

You can also set the clock system to 24 hours or

12 hours.

To cancel the display demonstration, follow

the procedure below:

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

SEL

2 Press number button 2 to select

“CLOCK”—Clock category of the

PSM settings.

2 Press number button 1 to select

“MOVIE”—Movie category of the PSM

settings.

The “Clock Hr” setting screen appears on

the display.

3 Adjust the hour.

The “Graphics” setting screen appears on

the display.

ATT

3 Select “Off.”

ATT

4 Set the minute.

1 Select “Clock Min (minute).”

2 Adjust the minute.

4 Finish the setting.

ATT

SEL

5 Set the clock system.

1 Select “24H/12H.”

4 Select the level meter pattern you

want.

2 Adjust “24Hours” or “12Hours.”

As you turn the control

ATT

dial, the level meters

change as follows:

ATT

Meter 1

Meter 2

Standard

Meter 3

6 Finish the setting.

5 Finish the setting.

SEL

To check the current clock time when the unit

is turned off, press DISP (D).

The power turns on and the clock time is shown

for about 5 seconds, then the power turns off.

Standard:

No level meter appears on the display. (Initially

selected when shipped from the factory.)

Meter 1:

Selecting the level meter

The left and right audio level meters appear.

You can show the level meters on the display

while playing any source. This unit is equipped

with three level meter patterns.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

Meter 2:

Level meters fluctuate horizontally from center to

both sides as audio levels changes.

SEL

2 Press number button 3 to select

“DISP”—Display category of the PSM

settings.

Meter 3:

Signal waves fluctuate at the center and spread

outward.

3 Select “Theme.”

RADIO OPERATIONS

SRC

DISP

T/P

ATT

MODE

SEL

Note:

Listening to the radio

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

You can use either automatic searching or manual

searching to tune in to a particular station.

2 Start searching a station.

Searching a station automatically:

Auto search

Press ¢

to search

stations of higher

frequencies.

1 Select the band (FM1 – 3, AM).

1 Press SRC (source)

Press

4 to search

SRC

repeatedly to select the tuner.

stations of lower

frequencies.

2 Press and hold SRC for more

than 1 second.

The band indication on the

display starts flashing.

FM1

3 Within about 5 seconds (while

the band indication is

FM3 FM2

Ex. When the band is FM

flashing), press SRC again.

Each time you press the

button, the band changes.

When a station is received, searching stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

Last received station of the selected band is

tuned in.

Programme type (PTY)

(see page 14)

Program station (PS)

name (see page 14)

Lights up when receiving an FM stereo broadcast

with sufficient signal strength.

Searching a station manually:

Manual search

To tune in FM stations only with strong

signals—LO/DX (Local/Distant)

While searching FM stations (including SSM—

see page 12), this unit stops searching whenever

it detects signals (DX mode: The DX indicator is

lit—initial setting). If received signals are weak,

you may only hear noises.

By setting LO/DX to “Local,” you can make this

unit detects only stations with sufficient signal

strength.

1 Select the band (FM1 – 3, AM).

SRC

1 Press SRC (source)

repeatedly to select the tuner.

2 Press and hold SRC for more

than 1 second.

FM1

3 Within about 5 seconds, press

SRC again.

MODE

Each time you press the

button, the band changes.

1 Press MODE (M) while listening to

FM3 FM2

an FM stereo broadcast.

“Mode” appears on the display, and

the number buttons start flashing.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

2 Press and hold ¢

4 until

“Manual Search” appears on the

See page 40 for this function.

display.

2 Press number button 2, while “Mode” is still

on the display.

Each time you press the button, the “LO/DX”

setting alternates between “Local” and “DX.”

3 Tune in to a station you want while

“Manual Search”is still on the display.

Press ¢

to tune in to

stations of higher

frequencies.

Press

4 to tune in to

stations of lower

frequencies.

After about

5 seconds

• If you release your finger from the button,

the manual mode will automatically turn off

after about 5 seconds.

The display returns to the source indication

screen.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for FM

and 9 kHz intervals for AM—MW/LW) until

you release the button.

LO indicator appears

When an FM stereo broadcast is hard to

receive:

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

Set the FM reception mode to “Mono On.”

MODE

1 Press MODE (M) while listening to

an FM stereo broadcast.

“Mode” appears on the display, and

the number buttons start flashing.

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band

(FM1, FM2 and FM3).

2 Press number button 1, while “Mode” is still

on the display.

Each time you press the button, “Mono On”

and “Mono Off” alternately appears.

1 Select the FM band (FM1 – 3) you want

to store FM stations into.

1 Press SRC (source)

SRC

repeatedly to select the tuner.

2 Press and hold SRC for more

than 1 second.

The band indication on the

display starts flashing.

FM1

3 Within about 5 seconds (while

the band indication is

After about

5 seconds

FM3 FM2

flashing), press SRC again.

Each time you press the

button, the band changes.

The display returns to the source indication

screen.

2 Start SSM.

MODE

1 Press MODE (M).

“Mode” appears on the

display, and the number

buttons start flashing.

MO indicator appears

2 Press and hold number

button 5 until “– SSM –”

appears.

If the sound quality decreases and the

stereo effect is lost while listening to an

FM station

In some areas, adjacent stations may

interfere with each other. If this interference

occurs, this unit can automatically reduce this

interference noise (initial factory setting).

However, in this case, the sound quality will

be degraded and the stereo effect will be also

lost.

If you do not want to degrade the sound

quality and to lose the stereo effect, rather

than to eliminate the interference noise, see

“To change the FM tuner selectivity—IF

Filter” on page 49.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons —

No.1 (lowest frequency) to No.6 (highest

frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Notes:

Manual preset

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Tuning in to a preset station

1 Press SRC (source)

SRC

You can easily tune in to a preset station.

Remember that you must store stations first. If you

have not stored them yet, see “Storing stations in

memory” on pages 12 and 13.

repeatedly to select the tuner.

2 Press and hold SRC for more

than 1 second.

3 Within about 5 seconds, press

FM1

SRC again.

Selecting a preset station directly

Each time you press the

button, the band changes.

FM3 FM2

1 Select the band (FM1 – 3, AM).

1 Press SRC (source)

SRC

repeatedly to select the tuner.

2 Tune in to a station (in this example,

2 Press and hold SRC for more

than 1 second.

of 92.5 MHz).

Press ¢

stations of higher

frequencies.

to tune in to

The band indication on the

display starts flashing.

FM1

3 Within about 5 seconds (while

the band indication is

FM3 FM2

flashing), press SRC again.

Each time you press the

button, the band changes.

Press

4 to tune in to

stations of lower frequencies.

3 Press and hold the number button (in

this example, 1) for more than 2

seconds.

2 Select the number (1 – 6) for the preset

station you want.

The selected preset number

flashes for a while.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Selecting a preset station using the

preset station list

If you forget what stations are stored in what

preset numbers, you can check the preset station

list, then select your desired station on the list.

Changing the display pattern

By pressing DISP (D), you can change the

information shown on the display.

Each time you press the button, the

display patterns change as follows:

DISP

1 Select the band (FM1 – 3, AM).

1 Press SRC (source)

SRC

• Initial display pattern:

repeatedly to select the tuner.

2 Press and hold SRC for more

than 1 second.

3 Within about 5 seconds, press

FM1

SRC again.

Each time you press the

button, the band changes.

FM3 FM2

2 Press and hold 5 (up) or ∞ (down) until

the preset station list for the current

band (FM1, FM2, FM3, or AM) appears

on the display.

• Programme station (PS) name is

emphasized:

The currently received station will

be highlighted on the display.

*¹“No Name” always appears for AM or FM non-RDS

stations (see the following pages).

*²Appears only when selecting a preset station.

*³PTY code appears only when receiving an RDS

station.

Notes:

• If one of FM band preset station lists (FM1,

FM2, or FM3) is shown on the display, you

can show the other lists by pressing 5 (up) or

∞ (down).

• If a preset station is an FM RDS station with

PS signal, PS name will be shown instead of

the station frequency.

3 Select the number (1 – 6) for the preset

station you want.

RDS OPERATIONS

To use Network-Tracking Reception

What you can do with RDS

You can select the different modes of network-

tracking reception to continue listening to the

same programme in its finest reception.

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals. For example, the stations

send their station names, as well as information

about what type of programme they broadcast,

such as sports or music, etc.

Another advantage of RDS function is called

“Enhanced Other Networks.” By using the

Enhanced Other Networks data sent from a

station, you can tune in to a different station of a

different network broadcasting your favorite

programme or traffic announcement while

listening to another programme or to another

source such as CD.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

activated without Regionalization.

With this setting, the unit switches to

another station within the same

network when the receiving signals

from the current station become

weak. (In this mode, the programme

may differ from the one currently

received.)

The AF indicator lights up.

By receiving the RDS data, this unit can do the

following:

• AF Reg: Network-Tracking Reception is

activated with Regionalization.

With this setting, the unit switches to

another station, within the same

network, broadcasting the same

programme when the receiving

signals from the current station

become weak.

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search

• Programme search

• And some other functions

The REG indicator lights up.

• Off:

Network-Tracking Reception is

deactivated.

Neither the AF nor the REG indicator

lights up.

Tracing the same programme

automatically (Network-Tracking

Reception)

When driving in an area where FM reception is

not good, the tuner built in this unit automatically

tunes in to another RDS station, broadcasting the

same programme with stronger signals. So, you

can continue to listen to the same programme in

its finest reception, no matter where you drive.

(See the illustration on page 21.)

Two types of the RDS data are used to make

Network-Tracking Reception work correctly

—PI (Programme Identification) and AF

(Alternative Frequency).

AF or REG indicator lights up.

Note:

If a DAB tuner is connected and Alternative Reception

(for DAB services) is activated, Network-Tracking

Reception is also activated (“AF”) automatically. On

the other hand, Network-Tracking Reception cannot

be deactivated without deactivating Alternative

Reception. (See page 69.)

Without receiving these data correctly from the

RDS station you are listening to, Network-

Tracking Reception will not operate.

Using TA Standby Reception

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

the current source (another FM station, CD, or

other connected components).

• TA Standby Reception will not work if you are

listening to an AM station.

SEL

Press T/P to activate TA Standby

Reception.

Each time your press the button,

this function is turned on and off

alternately.

T/P

2 Press number button 4 to select

“TUNER”—Tuner category of the

PSM settings.

The “PTY Stnby” (standby) setting screen

appears on the display.

TP indicator appears

(either lights up or flashes)

• When the DAB tuner is connected, this also

turns on and off Road Traffic Flash Standby

Reception (see page 66).

3 Select “AF-Regn’l” (alternative

frequency/regionalization

reception).

7 When the current source is FM, the TP

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

If a station starts broadcasting a traffic

announcement, “Traffic Flash” appears on

the display, and this unit automatically tunes

in to the station. The volume changes to the

preset TA volume level (see page 20) and

the traffic announcement can be heard.

• If the TP indicator flashes, TA Standby

Reception is not yet activated since the

station being received does not provide the

signals used for TA Standby Reception.

To activate TA Standby Reception, you need

to tune in to another station providing these

4 Select the desired mode—“AF,”

“AF Reg,”or “Off.”

ATT

signals. Press ¢

for such a station.

When a station providing these signals is

tuned in, the TP indicator stops flashing and

remains lit. Now TA Standby Reception is

activated.

4 to search

5 Finish the setting.

SEL

7 When the current source is other than FM,

the TP indicator lights up.

If a station starts broadcasting a traffic

announcement, “Traffic Flash” appears on the

display, and this unit automatically changes the

source and tunes in to the station.

3 Select one of the twenty-nine PTY

codes. (See page 21.)

Selected code name

appears on the display

ATT

and is stored into

memory.

Using PTY Standby Reception

4 Finish the setting.

PTY Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) from any source except AM

stations.

SEL

To select your favorite PTY code for PTY

Standby Reception

When shipped from factory, PTY Standby

Reception has been set to work for searching for

“News” programmes.

You can select your favorite programme type for

PTY Standby Reception.

To set PTY Standby Reception

When the DAB tuner is connected, the following

operations will set PTY Standby Reception both

for the FM tuner and the DAB tuner. (See page

69.)

MODE

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

1 Press MODE (M) while listening to

an FM stereo broadcast.

“Mode” appears on the display, and

the number buttons start flashing.

SEL

2 Press number button 4 to select

“TUNER”—Tuner category of the

PSM settings.

The “PTY Stnby” (standby) setting screen

appears on the display.

CONTINUED ON THE NEXT PAGE

2 Press number button 3 repeatedly to activate

PTY Standby Reception while “Mode” is still

on the display.

Each time you press the button, PTY Standby

Reception turns on and off alternately.

Note:

After turning on PTY Standby Reception, you can

change the source without canceling PTY Standby

Reception. In this case, the PTY indicator stops

flashing if it was. If a station starts broadcasting the

selected PTY programme, this unit automatically

changes the source and tunes in to the station.

• If you change the source to AM, PTY Standby

Reception will be temporarily canceled.

• You can only deactivate the PTY Standby Reception

when the source is FM.

Searching your favorite programme

Ex.: When the currently selected PTY code

You can search any one of the PTY codes.

In addition, you can store your 6 favorite

programme types in the number buttons.

When shipped from the factory, the following

6 programme types have been stored in the

number buttons (1 to 6).

for PTY Standby Reception is “News”

After about

5 seconds

The display returns to the source indication

screen.

To store your favorite programme types, see

below and page 19.

To search your favorite programme type, see

page 19.

Pop M

Rock M

Easy M

PTY indicator appears

(either lights up or flashes)

Classics

Affairs

Varied

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

To store your favorite programme types

If a station starts broadcasting the selected

PTY programme, this unit automatically tunes

in to the station.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated since the station

being received does not provide the signals

used for PTY Standby Reception.

1 Press and holdT/P for more than 2

seconds while listening to an FM

station.

T/P

To activate PTY Standby Reception, you need

to tune in to another station providing these

signals. Press ¢

4 to search for

such a station.

When a station providing these signals is tuned

in, the PTY indicator stops flashing and

remains lit. Now PTY Standby Reception is

activated.

The last selected PTY code appears.

2 To select one of your favorite

2 Select one of the twenty-nine PTY

codes. (See page 21.)

programme type

Selected code name

appears on the display.

ATT

To select any one of the twenty-nine

PTY codes

3 Press and hold the number button

for more than 2 seconds to store the

PTY code selected into the preset

number you want.

ATT

Selected preset number flashes for a while.

4 Press and holdT/P for more than 2

Ex.: When “Rock M” is selected

seconds to exit from this mode.

How to use the 5 (up) or ∞ (down) button

By pressing 5 (up) or ∞ (down) repeatedly,

you can show the list of your preset PTY codes

and all twenty-nine PTY codes (six PTY codes

at a time). First, the list of your stored PTY

codes appears, then all twenty-nine PTY codes

(six PTY codes at a time) appears in sequence.

Press the number button to select your desired

PTY code on the list currently shown on the

display.

T/P

To search your favorite programme type

1 Press and hold T/P for more than 2

seconds while listening to an FM

station.

T/P

3 Start PTY search for your favorite

programme.

• If there is a station broadcasting a programme

of the same PTY code as you selected, that

station is tuned in.

The last selected PTY code appears.

• If there is no station broadcasting a

programme of the same PTY code as you

selected, the station will not change.

Note:

In some areas, the PTY search will not work correctly.

Setting the TA volume level

Other convenient RDS

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

the volume level automatically changes to the

preset level.

• See also “Changing the general settings

(PSM)” on page 46.

functions and adjustments

Automatic selection of the station

when using the number buttons

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting. (Programme search)

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press number button 4 to select “TUNER”—

Tuner category of the PSM settings.

3 Press ¢

Volume.”

4 to select “TA

4 Turn the control dial to set to the desired

volume.

You can set it from “Volume 0” to “Volume 50.”

5 Press SEL (select) to finish the setting.

• The unit takes some time to tune in to another

station using programme search.

To activate programme search, follow the

procedure below.

• See also “Changing the general settings

(PSM)” on page 46.

Automatic clock adjustment

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically

using the CT (Clock Time) data in the RDS

signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

• See also “Changing the general settings

(PSM)” on page 46.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press number button 4 to select “TUNER”—

Tuner category of the PSM settings.

3 Press ¢

4 to select

“P(Programme)-Search.”

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press number button 2 to select “CLOCK”—

Clock category of the PSM settings.

4 Turn the control dial clockwise to select “On.”

Now programme search is activated.

5 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same

procedure and select “Off” in step 4 by turning

the control dial counterclockwise.

3 Press ¢

4 to select “Auto Adj”

(adjustment).

4 Turn the control dial counterclockwise to select

“Off.”

Now automatic clock adjustment is canceled.

5 Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the

same procedure and select “On” in step 4 by

turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “Auto Adj” to “On.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

PTY codes

News:

News

Social:

Programmes on social activities

Affairs:

Topical programmes expanding on

current news or affairs

Programmes which impart advice

on a wide variety of topics

Sport events

Religion: Programmes dealing with any

aspect of belief or faith, or the

nature of existence or ethics

Phone In: Programmes where people can

express their views either by

Info:

Sport:

Educate: Educational programmes

phone or in a public forum

Drama:

Culture:

Radio plays

Programmes on national or

regional culture

Travel:

Programmes about travel

destinations, package tours, and

travel ideas and opportunities

Programmes concerned with

recreational activities such as

gardening, cooking, fishing, etc.

Jazz music

Science: Programmes on natural science

and technology

Varied:

Leisure:

Other programmes like comedies

or ceremonies

Jazz:

Pop M:

Pop music

Country:

Country music

Rock M:

Easy M:

Light M:

Rock music

Easy-listening music

Light music

Nation M: Current popular music from

another nation or region, in that

country’s language

Classics: Classical music

Other M: Other music

Oldies:

Folk M:

Classic pop music

Folk music

Weather: Weather information

Finance: Reports on commerce, trading, the

Stock Market, etc.

Document: Programmes dealing with factual

matters, presented in an

investigative style

Children: Entertainment programmes for

children

The same programme can be received on different frequencies.

Programme 1

broadcasting on

frequency A

Programme 1

broadcasting on

frequency E

Programme 1

broadcasting on

frequency B

Programme 1

broadcasting on

frequency C

Programme 1

broadcasting on

frequency D

CD OPERATIONS

SRC

DISP

T/P

ATT

MODE

SEL

This unit has been designed to reproduce CDs,

CD-Rs (Recordable), CD-RWs (Rewritable), and

CD Texts.

• This unit is also compatible with MP3 and

WMA discs. For details about these discs,

refer to “A Guide to MP3/WMA” (separate

volume).

Playing a disc

1 Open the control panel.

2 Insert a disc into the loading slot.

About MP3 and WMA discs

MP3 and WMA (Windows Media^®Audio) “tracks”

(word “file” is not used to indicate MP3 or WMA

files, “track” is used in this manual) are recorded

in “folders.”

During recording, the tracks and folders can be

arranged in a way similar to arranging files and

folders of computer data.

“Root” is similar to the root of a tree. Every track

and folder can be linked to and be accessed from

the root.

The unit draws the

disc, the control panel

goes back to the

previous position (see

page 52), and playback

starts automatically.

All tracks will be played repeatedly until you stop

playback.

Notes:

• MP3 or WMA discs require a longer readout time.

(It differs due to the complexity of the folder/track

configuration.)

• For details on playable discs and other related

information, see page 74.

Hierarchy

Level 1

ROOT

Level 2

Level 3

Level 4

Level 5

To stop play and eject the disc

Press 0.

Playback stops, the control panel moves down,

and the disc automatically ejects from the loading

slot.

: Folders and their playback order

If you change the source, the disc play also stops

(without ejecting the disc this time).

: MP3/WMA tracks and their playback

order

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• Display indications when inserting an

audio CD or a CD Text:

• Display indications when inserting an

MP3 or a WMA disc

2 3

1 Total track number

2 Total playback time of the disc

3 Disc title/performer (if no title is recorded or

assigned*, “No Name” appears.)

4 Track title (if no title is recorded, “No Name”

appears.)

5 Current track number

6 Elapsed playing time of the current track

1 Total folder number

2 Total track number

3 Disc type—MP3 or WMA

4 Album name/performer (or folder name

“Tag” is set to “Off”—see page 49, or when no Tag

* If a name has been assigned to the audio CD (see

page 51), it will be shown on the display.

when

is recorded)

5 Track title (or track name

when “Tag” is set to

“Off”—see page 49, or when no Tag is recorded)

6 Current folder number

7 Current track number

8 Elapsed playing time of the current track

Notes:

• When a disc is already in the loading slot, selecting “CD” as the source starts disc play.

• The unit cannot read or play an MP3 track without the extension code <mp3>, and a WMA track

without the extension code <wma>.

• When a disc is inserted upside down, the disc automatically ejects.

• If you change the source, playback also stops (without ejecting the disc).

Next time you select “CD” as the source, disc play starts from where it has been stopped previously.

To return the control panel to its previous

position, press 0 again.

• If you keep the loading slot open for about 1

minute, (beeps sound when the “Beep” setting

is turned “On”—see page 49) the control panel

returns to its previous position.

Note:

If the ejected disc is not removed within 15 seconds,

the disc is automatically inserted again into the

loading slot to prevent it from dust. (Disc will not play

this time.)

Be careful not to get the disc or your finger

caught in between the control panel and the

unit.

What is ImageLink

Locating a particular portion

on a track

When an MP3 or a WMA folder includes an

image <jml> file edited by Image Converter

(supplied in the CD-ROM), you can show the

image on the display while the tracks in the

folder are played back.

To fast-forward or reverse the track

• While reading an image <jml> file, no

sounds come out (the preset image of a

coffee cup is shown on the display during

this period).

Press and hold ¢

playing a disc, to fast-forward the

track.

, while

Press and hold

playing a disc, to reverse the

track.

4 , while

Display window

Album 1

Music001.mp3

Music002.mp3

Music003.mp3

(Folder 1)

Photo1.jml

Note:

Album 2

(Folder 2)

Display window

Music004.wma

Music005.mp3

Music006.wma

During this operation on an MP3 or WMA disc, you

can only hear intermittent sounds. (The elapsed

playing time also changes intermittently on the

display.)

Photo2.jml

Photo3.jml

If there are more than one <jml> file in a folder, a

<jml> file with younger playback order number

will be shown on the display (in the above

To go to the next or previous tracks

Press ¢

briefly, while

example, “Photo2.jml” will be used for Album 2).

playing a disc, to go ahead to

the beginning of the next track.

Each time you press the button

consecutively, the beginning of

the next tracks is located and

played back.

To activate ImageLink, follow the procedure

below

• See also “Changing the general settings

(PSM)” on page 46.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display.

2 Press number button 1 to select “MOVIE” —

Movie category of the PSM settings.

The “Graphics” setting screen appears on

the display.

Press

4 briefly, while playing a disc, to go

back to the beginning of the current track.

Each time you press the button consecutively, the

beginning of the previous tracks is located and

played back.

3 Turn the control dial to select “ImageLink.”

4 Press SEL (select) to finish the setting.

ImageLink starts functioning when the next

folder starts playing.

Note:

ImageLink will not work in the following cases:

• If no <jml> file is included in an MP3/WMA

folder.

• If Intro Scan is activated.

• If the source is changed to another from “CD,” or

• If you turn off then on the unit while the preset

image of a coffee cup is shown on the display.

2 Press 5 (up) or ∞ (down), while

“Mode” is still on the display.

Locating a track on a disc

First time you press 5 (up) or ∞

(down), the track skips to the

nearest higher or lower track

To go to a particular track directly

(ONLY for CD and CD Text discs)

with a track number of multiple ten (ex. 10th,

20th, 30th).

Then, each time you press the button, you

can skip 10 tracks (see “How to go to the

desired track quickly” that follows).

• After the last track, the first track will be

selected, and vice versa.

Press the number button corresponding to the

track number to start its playback.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• While playing an MP3 or a WMA disc, this

operation is possible only within a folder.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

How to go to the desired track quickly

• Ex. 1: To select track number 32 while

playing track number 6

To go to a track quickly

MODE

1 Press MODE (M) while playing a

disc.

“Mode” appears on the display, and

the number buttons and 5 (up)/ ∞

(down) buttons start flashing.

(Three times)

(Twice)

Track 6

\ 10 \ 20 \ 30

\ 31 \ 32

• Ex. 2 :To select track number 8 while

While playing an audio CD or a CD Text disc:

playing track number 36

MODE

(Three times)

(Twice)

\ 9 \ 8

Current track number

Track 36 \ 30 \ 20 \ 10

See page 40 for this function.

While playing an MP3 or a WMA disc:

Current folder number

Current track number

To skip to the next or previous folder

(either on the same or different hierarchy levels)

Locating a folder on a disc

The following operations are only possible

when playing an MP3 or a WMA disc.

See the hierarchy diagram on page 22.

To go to a folder directly

IMPORTANT:

On the control panel:

To directly select the folders using the number

button(s), it is required that folders are

assigned 2 digit numbers at the beginning of

their folder names. (This can only be done

during the recording of CD-Rs or CD-RWs.)

Ex.: If folder name is “01 ABC”

= Press 1 to go to Folder “01 ABC.”

If folder name is “1 ABC,” pressing 1

does not work.

Press 5 (up) while playing a disc

to skip to the next folder.

Each time you press the button

consecutively, the next folder is

located and the first track in the

folder starts playing.

Press ∞ (down) while playing a disc to skip back

to the previous folder.

If folder name is “12 ABC”

= Press and hold 6 (12) to go to Folder

“12 ABC.”

Each time you press the button consecutively,

the previous folder is located and the first track in

the folder starts playing.

Press the number button corresponding to the

folder number to start playing the first track in the

selected folder.

On the remote controller:

PRESET

Press and hold 3 (right) while

playing a disc to skip to the next

folder.

Each time you press and hold the

button consecutively, the next

folder is located and the first track

in the folder starts playing.

• To select a folder number from 01 – 06:

Press 1 (7) – 6 (12) briefly.

• To select a folder number from 07 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

Press and hold 2 (left) while playing a disc to

skip back to the previous folder.

Each time you press and hold the button

consecutively, the previous folder is located and

the first track in the folder starts playing.

Notes:

• If the folder does not contain any MP3 or WMA

tracks, playback will not start (“No Music” appears

on the display). Select another folder.

• You cannot directly select a folder with a number

greater than 12.

Note:

If the folder does not contain any MP3 or WMA

tracks, it is skipped.

To select a particular track in a folder, press

4 after selecting the folder.

To skip to the folders on the lower or on

the higher hierarchy levels

To skip to the next or previous folder

within a folder (on the same hierarchy level)

Example 1

ROOT

Example 2

See the hierarchy diagram on page 22.

ONLY on the remote controller:

DISC

PRESET

Press 5 (up) while playing a disc to

skip to a folder on the higher

hierarchy level.

Press 3 (right) while playing a disc

to skip to the next folder.

Each time you press the button

consecutively, the next folder

included within the same folder (on

the same hierarchy level) is

DISC

Each time you press the button

consecutively, a folder on the higher

hierarchy level is located (and the

first track in the folder starts playing

if recorded).

located (and the first track in the

folder starts playing if recorded).

Press 2 (left) while playing a disc to skip back to

the previous folder.

Press ∞ (down) while playing a disc to skip to a

folder on the lower hierarchy level.

Each time you press the button consecutively, a

folder on the lower hierarchy level is located (and

the first track in the folder starts playing if

recorded).

• If there are more than one folder on the lower

or higher hierarchy level, a folder with younger

playback order number will be located.

Each time you press the button consecutively,

the previous folder included within the same

folder (on the same hierarchy level) is located

(and the first track in the folder starts playing if

recorded).

Note:

If the folder does not contain any MP3 or WMA

tracks, playback will not start (“No Music” appears

on the display). Select another folder.

Note:

If the folder does not contain any MP3 or WMA

tracks, playback will not start (“No Music” appears

on the display). Select another folder.

•

To go back to the root directly, press R D on

the remote controller. You can go back to the root

from any folder.

• If tracks are recorded on the disc directly

without putting them into a folder, this unit

starts playing the tracks.

To select a track and start playback

Selecting a folder and a track

using the name lists

1 Press and hold 5 (up) or ∞ (down) so

that the folder name list of the inserted

disc appears on the display.

The following operations are only possible

when playing an MP3 or a WMA disc.

The currently playing folder will

be highlighted on the display.

You can show the folder name and track name

lists on the display while playing a disc, then

select a folder or a track you want to play.

To select a folder and start playback

1 Press and hold 5 (up) or ∞ (down) so

that the folder name list of the inserted

disc appears on the display.

The currently playing folder will

2 Show the track name list of the current

folder.

be highlighted on the display.

Each time you press the button,

the lists on the display changes

as follows:

Track name

list

Folder name

list

Notes:

•

The display can show only six names at a

time. You can show the other names on the

next lists by pressing 5 (up) or ∞ (down).

The currently playing track (or folder) will be

highlighted on the display.

•

If you press ¢

4 , the track

name list of the current playing folder

appears. Each time you press the button, the

folder name list and track name list

alternately appears.

Only folders including MP3 or WMA tracks

will be listed.

Note:

The display can show only six names at a time.

You can show the other names on the next lists by

pressing 5 (up) or ∞ (down).

•

2 Select the number (1 – 6) for the folder

3 Select the number (1 – 6) for the track

you want to play.

Selecting playback modes

Mode

Plays randomly

Random Folder*:All tracks of the current folder,

then moves to the next folder and

so on.

To play back tracks at random (Random Play)

You can play back tracks on a disc (or in a folder

• While playing,

up on the display.

lights

for MP3 and WMA discs) at random.

MODE

1 Press MODE (M) while playing a

Random Disc: All tracks on the disc.

• While playing,

disc.

lights

“Mode” appears on the display, then

the number buttons and the 5 (up)/

∞ (down) buttons start flashing.

up on the display.

* “Random Folder” can be used for MP3 and WMA

discs only.

While playing an audio CD or a CD Text disc:

To cancel Random Play, select “Random Off” by

pressing number button 3 repeatedly or press

number button 4 in step 2.

Current track number

To play back tracks repeatedly (Repeat Play)

You can play back a track (or a folder for MP3 and

WMA discs) repeatedly.

While playing an MP3 or a WMA disc:

MODE

1 Press MODE (M) while playing a

disc.

“Mode” appears on the display, then

the number buttons and the 5 (up)/

∞ (down) buttons start flashing.

Current folder number

Current track number

2 Press number button 3, while “Mode” is still

on the display.

2 Press number button 2, while “Mode” is still

on the display.

Each time you press the button, random play

mode changes as follows:

Each time you press the button, repeat play

mode changes as follows:

For audio CD and CD Text discs:

Random Disc

Random Off

For MP3 and WMA discs:

Random Folder

Random Disc

Random Off

For audio CD and CD Text discs:

Repeat Track

For MP3 and WMA discs:

Repeat Track

Intro Track

Repeat Off

Intro Off

For MP3 and WMA discs:

Intro Track

Intro Off

Intro Folder

Repeat Folder

Repeat Off

Mode

Plays repeatedly

Mode

Plays the beginnings of

Repeat Track : Current (or specified) track.

• While playing,

Intro Track :

All tracks of the disc.

• While playing,

up on the display.

lights

up on the display.

Repeat Folder*: All tracks of the current (or

specified) folder.

Intro Folder* : First tracks of all folders.

• While playing,

up on the display.

* “Intro Folder” can be used for MP3 and WMA discs

* “Repeat Folder” can be used for MP3 and WMA

only.

discs only.

To cancel Intro Scan, select “Intro Off” by

pressing number button 1 repeatedly or press

number button 4 in step 2.

To cancel Repeat Play, select “Repeat Off” by

pressing number button 2 repeatedly or press

number button 4 in step 2.

Prohibiting disc ejection

To play back only intros (Intro Scan)

You can play back the first 15 seconds of each

track sequentially.

You can prohibit disc ejection and can lock a disc

in the loading slot.

MODE

1 Press MODE (M) while playing a

While pressing SEL (select), press and

hold 0 for more than 2 seconds.

disc.

“Mode” appears on the display, then

the number buttons and the 5 (up)/

∞ (down) buttons start flashing.

SEL

2 Press number button 1, while “Mode” is still

on the display.

“No Eject” flashes on the display for about 5

seconds, and the disc is locked and cannot be

ejected.

Each time you press the button, intro scan

mode changes as follows:

To cancel the prohibition and unlock the disc

While pressing SEL (select), press and hold 0

again for more than 2 seconds.

“Eject OK” flashes on the display for about 5

seconds, and the disc is unlocked.

While playing an MP3 or a WMA disc:

Changing the display pattern

• Initial display

By pressing DISP (D), you can change the

information shown on the display.

Each time you press the button, the

display patterns change as follows:

DISP

While playing an audio CD or a CD Text disc:

• Initial display

• Album name/performer or folder name is

emphasized:

• Disc title/performer or your assigned

disc name is emphasized:

• Track title or track name is emphasized:

• Track title is emphasized:

• Clock time is emphasized:

Notes:

*¹If “Tag” is set to “Off” (see page 49), folder name

appear with

*²If “Tag” is set to “Off” (see page 49), track name

appear with

Notes:

*¹If no name is assigned to the audio CD, or if no disc

title/performer is recorded for the CD Text, “No

Name” will appear.

Display indication:

• When the title is emphasized at the center of the

display, it is shown entirely by scrolling if it

cannot be shown at a time. See also “To select

the scroll mode—Scroll” on page 48.

• Some characters or symbols will not be shown

(will be blanked or substituted) on the display.

To assign a name to an audio CD, see page 51.

*²“No Name” appears for an audio CD. If no track

title is recorded for the CD Text, “No Name” will

also appear.

DSP OPERATIONS

Selecting the DSP modes

1 Press SEL (select) once to show the

DSP mode selection screen.

Using the DSP (Digital Signal Processor) modes

built in this unit, you can create a more acoustic

sound field in your car compartment.

The last selected DSP mode

SEL

screen appears.

Available DSP modes:

THEATER: Reminds you of the intensity

reproducing a theater.

• If you press the button twice or more, the

unit enters different sound adjustment

modes.

HALL:

Reminds you of a large concert

hall with a being-there feeling.

DSP

SEL/BBE

iEQ

CLUB:

DOME:

STUDIO:

Reminds you of powerfulness

reproduced in a dance club.

Reminds you of a dome with a

high ceiling.

Canceled

• For iEQ (sound mode) settings, see pages

35 and 36.

• For SEL/BBE (basic sound) settings, see

pages 37 and 38.

Reminds you of live sounds in a

recording studio.

V. CANCEL:Reduces the vocal sounds (Voice

Cancel). Good for mastering your

favorite songs—Karaoke.

2 Press the number button to select

one of the DSP modes listed on the

display.

• This unit has two DSP mode selection

screens. To move to the other screen,

press 5 (up) or ∞ (down).

DEFEAT: Cancels the DSP modes.

Note:

Effectiveness of “V.CANCEL” depends on the

recording condition of the sources. Especially, if you

play back the following sources you cannot get the

satisfactory results.

• Monaural sources such as AM and monaural FM

broadcasting programs,

• Multiplex sound sources, and

• Sources recorded with duets, strong echo, a chorus,

or only a few instruments.

Press 5 (up) or ∞ (down).

To make further precise settings for the

DSP modes

You can also make further precise settings to

make the best sound field in your car

3 Adjust the DSP effect level—1, 2, or

The selected DSP effect

ATT

level is valid for all DSP

modes except “V.CANCEL.”

• As the number increases,

the effect level becomes

stronger.

compartment. These settings you make are valid

for all DSP modes except “V.CANCEL.”

Setting items:

The number of the built-in speakers :

Select the number of the speakers built

in your car—“2ch” or “4ch.”

• When you have four speakers (4ch)

built in your car, select your car size

(see step 5 on page 34).

Ex. When “Dome” is selected in the previous step

To cancel the DSP modes, select “DEFEAT” in

step 2.

Listening seat position:

Select the listening seat position where

you want to locate the sound image.

To exit from the DSP mode selection screen,

press SEL (select) repeatedly or wait for about 15

seconds.

1 Press SEL (select) once to show the

DSP mode selection screen.

The currently activated DSP

mode appears on the display.

SEL

Ex. When “Dome” is selected previously

• If the DSP mode is not activated

(“DEFEAT” is selected), you cannot go to

the next step. Select one of the DSP

modes first.

CONTINUED ON THE NEXT PAGE

2 Press number button 6 to enter the

5 If you select “4ch,” rotate the control

dial to select your car size.

further precise setting screen.

As you rotate it, the car size

changes as follows:

ATT

Compact

Middle

Large

3 Select your listening seats position.

•

Compact: Select when the distance from

the rear speakers to the listening

seat position is shorten than that

from the front speakers.

• Middle: Select when the distance from

the rear speakers to the listening

seat position is almost equal to

that from the front speakers.

• Large: Select when the distance from

the rear speakers to the listening

seat position is longer than that

from the front speakers.

• Press number button 1 to select “LEFT

(front left)” seat.

• Press number button 2 to select “RIGHT

(front right)” seat.

• Press number button 3 to select “FRONT”

seats.

Note:

If you have selected “2ch” in the previous step,

you cannot select the car size.

• Press number button 4 to select “ALL”

seats.

To go back to the DSP mode selection screen,

press number button 6.

Note:

To exit from the DSP mode selection screen,

press SEL (select) repeatedly or wait for about 15

seconds.

If fader or balance has been set close to its

extreme, appropriate effect may not be obtained.

4 Press number button 5 to set the

number of the built-in speakers.

• Select “4ch” for the four

speaker system, and “2ch” for

the two speaker system.

Note:

When “4ch” is selected, rear speakers are used

only to reproduce reflections and reverberations

in order to creates a being-there feeling in your

car compartment.

EQUALIZER OPERATIONS

Selecting preset sound modes 2 Press the number button to select

one of the sound modes listed on

the display.

• This unit has two sound mode selection

(iEQ: intelligent equalizer)

You can select a preset sound mode (iEQ:

screens. To move to the other screen,

intelligent equalizer) suitable to the music genre.

press 5 (up) or ∞ (down).

Available sound modes:

H. ROCK (Hard Rock)

R & B (Rhythm and Blues)

POP (Popular music)

JAZZ (Jazz)

DANCE (Dance music)

Country (Country music)

REGGAE (Reggae)

Press 5 (up) or ∞ (down).

CLASSIC (Classical music)

USER 1, USER 2, USER 3

FLAT (No sound mode is applied)

To cancel the sound mode, select “FLAT” in

step 2.

1 Press SEL (select) twice to show the

sound selection screen.

The last selected sound mode is

called up.

SEL

To exit from the sound mode selection

screen, press SEL (select) repeatedly or wait for

about 15 seconds.

Notes:

• For details about the preset settings of each sound

mode, see page 71.

• If “V.CANCEL” is selected for the DSP mode, you

cannot change the sound modes.

• If you press the button more than twice,

the unit enters different sound adjustment

modes.

DSP

SEL/BBE

iEQ

Canceled

• For DSP mode settings, see pages 32

to 34.

• For SEL/BBE (basic sound) settings, see

pages 37 and 38.

4 Make adjustments as you like.

Storing your own sound modes

You can adjust the sound modes to your preference

and store your own adjustments in memory

(USER 1, USER 2 and USER 3).

1 Press SEL (select) twice to show the

sound mode selection screen.

Buttons used for adjustments

The last selected sound mode is

SEL

called up.

1) Press ¢

4 to select the

frequency band—60Hz, 150Hz, 400Hz,

1kHz, 2.4kHz, 6kHz, 12kHz.

2) Press 5 (up) or ∞ (down) to adjust the

level of the selected band within the

range of –05 to +05.

Ex. When “R & B” is selected previously

3) Repeat steps 1) and 2) to adjust the

other frequency bands.

2 Press the number button to select

one of the sound modes listed on

the display.

5 Store the adjustment you made.

The confirmation message

SEL

appears—whether you want to

store the adjustment.

• This unit has two sound mode selection

screens. To move to the other screen,

press 5 (up) or ∞ (down).

3 Enter the sound adjustment mode.

The following sound mode

adjustment screen appears

on the display.

If you want to cancel the adjustment,

press DISP (D).

• Adjustment you made remains effective

until you select another sound mode.

6 Press number button 1, 2 or 3 to

select one of the user sound modes

(USER 1, USER 2, or USER 3) you

want to store into.

Ex. When you select “USER 1.”

SOUND ADJUSTMENTS

Performing the basic sound

2 Adjust the level.

settings

To adjust fader and balance—Fad, Bal:

Make these two adjustments at the same

time.

You can set the speaker output balance,

subwoofer output level, and input level of each

source.

• If you are using a two-speaker system, set

the fader level to “00.”

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

• Press 5 (up) or ∞

(down) to adjust the

fader.

• Press ¢

4 to adjust the

balance.

1 Press SEL (select) repeatedly to

show one of the basic sound setting

(SEL) screens.

Each time you press the button,

the adjustable items change as

SEL

follows:

Fad/Bal

DSP

iEQ

To adjust subwoofer output—Sub Out:

This takes effect only when a subwoofer is

connected.

Basic sound settings

Canceled

Sub Out

Vol Adj

BBE

To increase the level.

ATT

• For DSP mode settings, see pages 32

to 34.

To decrease the level.

• For iEQ (sound mode) settings, see pages

35 and 36.

Indication

To do:

Range

Fad

Adjust the front

and rear speaker

balance.

R06 (Rear only)

F06 (Front only)

You can also set an appropriate cutoff

frequency level according to the subwoofer

connected.

Bal

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

• Press ¢

4 to select “Low,”

Sub Out

Adjust the

00 (min.)

08 (max.)

Low/Mid/High

“Mid,” or “High.”

subwoofer output

level and cutoff

frequency level.

Low: Frequencies higher than 50 Hz are

cut off to the subwoofer.

Mid: Frequencies higher than 80 Hz are

cut off to the subwoofer.

High: Frequencies higher than 115 Hz are

cut off to the subwoofer.

BBE

Make sounds

natural.

BBE Off, BBE 1,

BBE 2, BBE 3

Vol Adj

Adjust and store –05 (min.)

the input level

of each source.

+05 (max.)

To adjust the input level of each source

—Vol Adj:

This setting is required for each source

except FM. Before making an adjustment,

select an appropriate source for which you

want to make an adjustment.

Once you have made an adjustment, it is

memorized, and you will not need to adjust

the volume level each time you change the

source.

To make sounds natural—BBE:

BBEDigital* is a new digital processing

method to restore the brilliance and clarity of

the original live sound in recording,

broadcasts, etc.

When a speaker reproduces sound, it

introduces frequency-dependent phase

shifting, causing high-frequency sounds to

take longer to reach the ear than low

frequency sounds. BBE Digital adjusts the

phase relationship between the low, mid and

high frequencies by adding a progressively

longer delay time to the low and mid

frequencies, so that all frequencies reach

the listener’s ears at the proper time.

Adjust to match the input level to the FM

sound level.

To increase the level.

ATT

Select the effect level.

To increase the level.

To decrease the level.

ATT

To decrease the level.

If the

(INPUT OVER) indicator appears

on the display, and sounds are distorted

The input level through the external component (LINE

IN) is set at a high level (more than 1.5 Vrms).

If this happens, adjust the output level on the

connected component so that the

BBE 1

BBE 2

BBE 3

BBE Off

(Canceled)

(INPUT OVER) indicator will not appear.

As the number gets higher, the effect level

becomes stronger.

When shipped from the factory, the effect

level is set to “BBE Off” (BBE Digital is

canceled).

Note:

If “V.CANCEL” is selected for the DSP mode, you

cannot change the BBE level.

(INPUT OVER) indicator

* Manufactured under license from BBE Sound,

Inc.

Licensed by BBE Sound , Inc. under USP4638258

and 4482866. BBE and BBE symbol are

registered trademarks of BBE Sound, Inc.

Downloading images and

animations

1 Open the control panel.

Before starting the following procedure, prepare a

CD-ROM including still images (pictures) and

animations (movies).

• The supplied Image Converter CD-ROM

includes sample images and animations, so

you can use this disc as your first trial.

2 Insert a CD-ROM with the files (images

and animations) into the loading slot.

The unit draws the

disc, the control panel

goes back to the

previous position (see

page 52).

IMPORTANT:

• Still images (pictures) should have <jml>,

and animations (movies) should have <jma>

as their extension code in their file names.

• Downloading a file can be done only while

selecting “CD” as the source; on the other

hand, deleting a file can be done while

selecting any source.

• If the disc includes playable audio files

such as MP3 tracks, playback starts

automatically.

• Before you download or erase the files,

observe the following:

3 Press MODE (M) after the disc is

detected.

– Do not download a file while driving.

– Do not turn off the ignition key of the car

while downloading or erasing a file.*

– Do not detach the control panel while

downloading or erasing a file.*

* If you do it, the file download or erasure will

not be done correctly. In this case, perform

the same procedure again.

MODE

“Mode” appears on the

display, then the number

buttons and the 5 (up)/

∞ (down) buttons start

flashing.

• If you have already downloaded an

animation for “PowerOn,” “PowerOff,” or

“Movie,” downloading a new animation

deletes the previously stored animation.

• It takes a long time for the unit to download

an animation.

– About 6 to 7 seconds for a still image (one

frame).

– About 3 to 4 minutes for an animation of 30

frames.

4 Press number button 6 to show the

download selection screen.

– About 10 minutes for an animation of 90

frames.

• While a station (or service for the DAB tuner)

is being tuned in by one of the Standby

Reception modes such as TA, PTY, or

Announcement, you cannot download or

delete a file. On the other hand, while you

are downloading or deleting a file, no

Standby Reception mode will work to have

this unit tune in a station (or service). It only

works after download or deletion is over.

5 Select (highlight) one of the listed

items for which you want to download

a file.

Notes:

• On this list, the folders including the target

files—<jml> files for “Picture” and <jma>

files for the others—are shown.

• The display can show only six names at a time.

You can show the other names on the next lists

by pressing 5 (up) or ∞ (down).

• If a disc inserted does not include any <jml>

and <jma> files, beeps sound and you cannot

go to the next step.

• PowerOn : Opening screen

To download an animation to be shown

after the unit is turned on. (You can store

only one animation consisting of 30 frames

maximum.)

If you want to cancel the procedure, press

DISP (D).

• PowerOff : Ending screen

To download an animation to be shown

before the unit is turned off. (You can store

only one animation consisting of 30 frames

maximum.)

7 Select (highlight) a folder in which a

file you want is included.

• Picture : Graphic screen*

To download a still image to be shown

while playing a source. (You can store 90

still images—each one frame.)

• Movie : Graphic screen*

To download an animation to be shown

while playing a source. (You can store only

one animation consisting of 90 frames

maximum.)

8 Show the name list of the files

included in the selected folder.

Each time you press the button,

the lists on the display changes

as follows:

* Graphic screen will appear only if no operation

is done for about 20 seconds.

File name

list

Folder name

list

If you want to cancel the procedure, press

number button 5, the download selection

screen goes off.

6 Show the name list of the folder

included in the inserted CD-R.

“File Check....” appears for a

Ex. When you have selected “Picture” in step 5.

Note:

while, then the folder list

appears.

The display can show only six names at a time.

You can show the other names on the next lists by

pressing 5 (up) or ∞ (down).

The currently selected folder will be

highlighted on the display.

CONTINUED ON THE NEXT PAGE

9 Select a file you want to download.

Deleting unwanted files

• When “BACK” is shown on the display above

number button 5, you can go back to the

previous screen by pressing number button 5.

To delete all the stored files at a time

1 Press MODE (M) while playing any

MODE

The file name appears, and the unit will

ask you “Download OK?”

source.

“Mode” appears on the display, and

the number buttons and 5 (up)/ ∞

(down) buttons start flashing.

10 If it is OK, press number button 1 to

start downloading.

2 Press number button 6 to show the

Downloading starts, and

download selection screen.

“Downloading...” appears on the

display.

If it is over, the file name list

appears again.

If it is not OK, press number button 5, the

file selection screen appears again. Repeat

from step 8 again.

3 Press 5 (up) or ∞ (down) to

select (highlight) all the listed

items.

11 Repeat steps 8 to 10 if you are

downloading files for “Picture” and

want to store more files.

12 Finish the download procedure.

4 Press number button 4.

DISP

The unit asks you “All File Delete

OK?”

5 Press number button 4 again.

“Now Deleting...” appears while

erasing the files. When erasure is

over, the download selection

screen appears again.

To download a file for another item listed on the

download selection screen, repeat from step 3

again.

Notes:

• If you try to store the 91st image for picture screen,

“Picture Full” appears and you cannot start

downloading. In this case, delete unwanted files

before downloading.

6 Press number button 5 to resume

the source indication screen.

• If the total frame number of an animation

downloaded exceeds the following number, the

frames exceeding that numbers are ignored.

– For opening and ending screens: 30

– For movie screen: 90

To delete the stored files for “Picture”

To delete the files stored for “PowerOn,”

“PowerOff,” “Picture (all stored images at

a time),” and “Movie”

(one by one)

MODE

1 Press MODE (M) while playing any

MODE

source.

1 Press MODE (M) while playing any

“Mode” appears on the display, and

the number buttons and 5 (up)/ ∞

(down) buttons start flashing.

source.

“Mode” appears on the display, and

the number buttons and 5 (up)/ ∞

(down) buttons start flashing.

2 Press number button 6 to show the

download selection screen.

2 Press number button 6 to show the

download selection screen.

3 Press 5 (up) or ∞ (down) to

select (highlight) “Picture.”

3 Press 5 (up) or ∞ (down) to

select (highlight) one of the

listed items.

Ex. When selecting “Picture”

4 Press number button 3.

The unit shows the name list of the

stored files.

Appears when “Picture” is selected (highlighted)

4 To delete the file stored in

“PowerOn,”“PowerOff,” and

“Movie,” press number button 3.

The file name of the previously stored

animation appears, and the unit asks you

“Delete OK?”

Note:

The display can show only six names at a time. You

can show the other names by pressing 5 (up) or ∞

(down) repeatedly.

To delete all the files stored in

“Picture” at a time, press number

button 4.

The unit asks you “All Picture Delete

OK?”

5 Press the number buttons for the file you want

to delete.

5 To delete the file stored in

“PowerOn,”“PowerOff,” and

“Movie,” press number button 3

again.

To delete all the files stored in

“Picture” at a time, press number

button 4 again.

Selected file name appears, and the unit asks

you “Delete OK?”

6 Press number button 3 to start

“Now Deleting...” appears while erasing the

selected file. When erasure is over, the

download selection screen appears again.

erasure.

“Now Deleting...” appears while

erasing the selected file. When

erasure is over, the name list of the stored

file appears again.

6 Press number button 5 to resume

the source indication screen.

CONTINUED ON THE NEXT PAGE

7 To delete more files, repeat from steps 5 and

3 Select “Opening” (opening screen

setting) or “Ending” (ending screen

setting).

8 Press DISP (D) to resume the

source indication screen.

DISP

Activating the downloaded

images and animations

Ex. When you select “Opening”

4 Select “User.”

To activate the animations stored for

opening and ending screens

ATT

After the unit turns on or before the unit turns off,

you can see preset animations on the display.

These are called opening screen and ending

screen. You can use your own edited animations

for these opening and ending screens.

• Opening and ending screens will not be shown

if the “KeyIn CFM” setting is set to “Short" or

“Off.” (See page 48).

• Default: Factory-preset animation is used.

• User:

Your own edited animation is

used.

5 Finish the setting.

• If no animation is stored in “PowerOn” and

“PowerOff,” “Opening” and “Ending” will not be

selected as a PSM item.

SEL

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

To activate the graphic screen using either

picture or movie

Using this setting, you can change the graphic

displays. These graphic screen appears if no

operation is done for about 20 seconds.

• If no image is stored in “Picture,” or no

animation in “Movie,” “UserPict.” will not be

selected as a PSM item.

SEL

2 Press number button 1 to select

“MOVIE”—Movie category of the PSM

settings.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

SEL

The “Graphics” setting screen appears on

the display.

2 Press number button 1 to select

“MOVIE”—Movie category of the PSM

settings.

To select a still image for graphic

display—User Picture

You cannot select “UserPict.” as a PSM item in

the following cases:

• If no image is stored in “Picture,” or

• “UserPict.” is not selected for the “Graphics”

setting (see the left column).

The “Graphics” setting screen appears on

the display.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

3 Select “UserMovie,”“UserSlide,” or

“UserPict.”

SEL

ATT

2 Press number button 1 to select

“MOVIE”—Movie category of the PSM

settings.

Ex. When you select “UserPict.”

•

UserMovie: Your edited animation stored in

“Movie” is activated as your

graphic screen.

• UserSlide: Your edited still images stored

in “Picture” are activated and

shown in sequence as your

graphic screen.

The “Graphics” setting screen appears on

the display.

• UserPict.: One of your edited still image

stored in “Picture” is activated

as your graphic screen.

3 Select “UserPict.”

Select one of the stored images

(see the next column).

4 Finish the setting.

File name of the currently selected image also

appears.

SEL

4 Select a file you want.

To cancel all graphic displays, select “Off” in

ATT

step 3.

Note:

For the “Graphics” setting, you can also select “All

Demo,” “Int Demo,” and “ImageLink.”

— See pages 8 and 48 for “All Demo” and “Int

Demo.”

5 Finish the setting.

SEL

— See pages 24 and 48 for “ImageLink.”

OTHER MAIN FUNCTIONS

Changing the general settings

(PSM)

3 Select the PSM item you want to

adjust.

You can change the items listed on the table on

the next page by using the PSM (Preferred

Setting Mode) control.

• The PSM items are grouped into five

categories—MOVIE, CLOCK, DISP (display),

TUNER, and AUDIO.

Basic Procedure

Ex. To change “Contrast”

• By pressing ¢

repeatedly, you can also move to another

category.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See pages 47 and 48.)

4 Adjust the PSM item selected.

ATT

The number buttons ,

4 /

SEL

, and control dial start

flashing to teach you that they

can be used for the next

operational steps.

5 Repeat steps 2 to 4 to adjust the

Ex. When you have selected “Graphics” previously

other PSM items if necessary.

2 Press number button (in this

example, 3) to select one of the PSM

categories.

6 Finish the setting.

SEL

The first-listed item in the selected category

appears.

Preferred Setting Mode (PSM) items

Indications

Selectable values

Initial settings Page

Int Demo

Long

See page 48.

Graphics

KeyIn CFM

Opening^*1

Ending^*1

UserPict.^*2

Clock Hr

Clock Min

24H/12H

Auto Adj

Scroll

Movie demonstration

Key-in confirmation

Opening animation

Ending animation

User Picture

Long

Short

Off

Default

User

Default

From the stored files

First stored

0 (0:00)

0 – 23 (1 – 12)

Hour adjustment

Minute adjustment

24 hours or 12 hours

Automatic clock setting

Scroll mode

00 – 59

00 (0:00)

8,9

12Hours

24Hours

12Hours

Off

Once

Auto

Once

Auto

Off

Auto

Time Set

Off

Dimmer

Dimmer mode

From– To*³

Contrast

LCDType

Font Type

Tag

Dimmer time setting

Contrast

Any time – Any time

18 – 7

1 – 10

Auto

Positive

Negative

Auto

Display type

Font type

Off

Tag display

Standard

Meter 3

Meter 1

Meter 2

Standard

News

Theme

Theme—Level meter

PTY standby

See page 21.

PTY Stnby

AF-Regn’l

AF Reg

Alternate frequency/

Regionalization reception

Off*⁴

TA Volume

P-Search

Traffic announcement

volume

Volume 0 — Volume 50

Volume 20

Off

Program search

Displayed only after a downlaodable file is stored in memory.

Displayed only after a downlaodable file is stored in memory and while selecting “UserPict.” for “Graphics.”

Displayed only when “Dimmer” is set to “Time Set.”

Displayed only when “DAB AF” is set to “Off.”

CONTINUED ON THE NEXT PAGE

Indications

Selectable values

Initial settings Page

IF Filter

Intermediate frequency

filter

Wide

Auto

DAB AF*⁵

Alternative frequency

Off

Announce*⁵Announcement standby

See page 68.

Travel

Beep

Key-touch tone

Off

Line In*⁶

Telephone

PowerAmp

Line Input switch

Telephone muting

Power amplifier switch

Off

Muting1

Muting2

Off

Displayed only when the DAB tuner is connected.

Not displayed when the current source is “LINE IN.”

To show the graphics on the display—

Graphics

To select the source animation on the

display—KeyIn CFM

You can change the graphics shown on the

display. These graphics appear if no operation is

done for about 20 seconds (except for

“ImageLink”).

When changing the source, the display shows

the source animation. You can select the source

animation on the display according to your

preference.

• All Demo: Display demonstration (animation)

appears (see page 8).

• Int Demo: Display demonstration (animation)

and playback source indication

• Long:

• Short:

• Off:

A long source animation appears.

A short source animation appears.

Cancels the source animation.

appears alternately (see page 8).

UserMovie: Your edited animation appears (see

pages 44 and 45).

• UserSlide: Your edited still images appears in

sequence (see pages 44 and 45).

• UserPict.: One of your edited still image

appears (see pages 44 and 45).

• ImageLink: To show a still image while playing

back an MP3/WMA tracks (see

To select the scroll mode—Scroll

When a disc information is emphasized at the

center of the display, it is shown entirely by

scrolling if it cannot be shown at a time.

•

• Once:

Scrolls only once.

• Auto:

Repeats the scroll (in 5-second

intervals).

• Off:

Cancels scroll mode.

page 24).

• Off:

Cancels all graphic display above.

Note:

Even if the scroll mode is set to “Off,” you can scroll

the display by pressing DISP (D) for more than 1

second.

Note:

You can select “UserMovie,” “UserSlide,” and

“UserPict.” only after downloading the appropriate

files in memory. (See page 40.)

To adjust the display contrast level

—Contrast

You can adjust the display contrast level among

1 to 10.

Adjust it to make the display indications clear

and legible.

• Auto: When this type of interference occurs,

this unit automatically increases the

tuner selectivity so that interference

noise will be reduced. (But the stereo

effect will also be lost.)

To select the display illumination pattern

—LCD Type

You can select the display illumination patterns

according to your preference.

• Wide: Subject to the interference from adjacent

stations, but sound quality will not be

degraded and the stereo effect will not

be lost.

• Auto:

Positive pattern will be selected

during the day time (depending on

the “Dimmer” setting); on the other

hand, negative pattern will be used

during the night time (depending on

the “Dimmer” setting).

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do

not want it to beep each time you press a button.

• Positive: Positive (normal) pattern of the

display.

• Negative: Negative pattern of the display.

• On: Activates the key-touch tone.

• Off: Deactivates the key-touch tone.

To select the font on the display

—Font Type

You can change the font types used on the

display. Select either “1” or “2” according to your

preference.

To select the telephone muting—

Telephone

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “Muting1” or “Muting2,”

whichever mutes the sounds from this unit.

• Muting1: Selects this if this setting can mute

the sounds when using the cellular

phone.

• Muting2: Selects this if this setting can mute

the sounds when using the cellular

phone.

To turn the tag display on or off—Tag

An MP3 and WMA track can contain track

information called “Tag” where its album name,

performer, track title, etc. are recorded.

• On: Turns on the Tag display while playing

MP3 or WMA tracks.

• If a track does not have Tags, folder

name and track name appear.

• Off: Turns off the Tag display while playing

MP3 or WMA tracks. (Only the folder

name and track name appear.)

• Off:

Cancels the telephone muting.

To turn on/off the line input switch

—Line In

You can switch off the line input when no external

component is connected to the LINE IN plugs.

Notes:

• If you change the setting from “Off” to “On” while

playing a track, the tag display will be activated

when the next track starts playing.

• For MP3 tracks only: There are two versions—ID3v1

(ID3 Tag version 1) and ID3v2 (ID3 Tag version 2).

When both ID3v1 and ID3v2 are recorded, ID3v2

will be shown.

• On: You can select “LINE IN” as the playback

source.

• Off: You cannot select “LINE IN” as the

playback source.

To turn on/off the power amplifier switch—

PowerAmp

You can switch off the built-in amplifier and send

the audio signals only to the external amplifier(s) to

get clear sounds and to prevent internal heat buildup

inside this unit.

To change the FM tuner selectivity

—IF Filter

In some areas, adjacent stations may interfere

with each other. If this interference occurs, noise

may be heard.

• On: When not using external amplifier(s).

• Off: When using external amplifier(s).

4 Set the dimmer mode as you like.

Selecting the dimmer mode

ATT

You can dim the display at night automatically or

as you set the timer.

When shipped from the factory, Auto Dimmer

mode is activated.

Note:

• Auto:

Activates Auto Dimmer.

When you turn on the car

head lights, the display

automatically dims.

Cancels Auto Dimmer.

Always dims the display.

Auto Dimmer equipped with this unit may not work

correctly on some vehicles, particularly on those

having a control dial for dimming.

In this case, select any other than “Auto.”

• Off:

• On:

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

• Time Set: Used to set the timer for the

dimmer mode.

Note:

Selecting “Auto” or “Time Set” may change the

display pattern to the “Negative” or “Positive”

pattern if “LCD Type” is set to “Auto.”

SEL

2 Press number button 3 to select

“DISP”—Display category of the

PSM settings.

• If you select “Time Set,” go to the following

steps to set the timer.

• If you select any other than “Time Set,” go

to step 7 to finish the setting.

5 Select “From– To” to set the timer for

the dimmer mode.

3 Press ¢

4 to select

“Dimmer.”

6 Set the timer.

1 Turn the control dial to select the start

time.

2 Press ¢

once.

3 Turn the control dial to select the end

time.

7 Finish the setting.

SEL

3 Select the character set you want

while the first character position is

flashing.

Assigning names to the sources

You can assign names to CDs (both in this unit

and in the CD changer), and the external

component.

After assigning a name, it will appears on the

display when you select the source.

Each time you press the button,

the character set changes as

follows:

DISP

A – Z

(Upper case)

a – z

(Lower case)

0 – 9 & symbols

(Numbers)

Maximum number of

Sources

Accented letters

(Lower case)

Accented letters

(Upper case)

characters

CDs*

Up to 32 characters (up to

40 discs)

4 Select a character.

• About the available

characters, see page

71.

ATT

External component Up to 8 characters

* You cannot assign a name to CD Text, MP3, and

WMA discs.

1 Select a source you want to assign a

5 Move the cursor to the next

name to.

(or previous) character position.

When you select a source, the

SRC

power automatically comes on.

2 While holding DISP (D), press and

hold SEL (select) for more than

2 seconds.

6 Repeat steps 3 to 5 until you finish

entering the name.

SEL

7 Finish the procedure while the last

selected character is flashing.

DISP

SEL

To erase the entered characters

Ex.: When you select CD as the source

Insert spaces using the same procedure

described above.

Notes:

• When you try to assign a name to the 41st disc,

“Name Full” appears on the display, and you

cannot enter the text entry mode. In this case, delete

unwanted names before assignment.

• When the CD changer is connected, you can assign

names to CDs in the CD changer. These names can

also be shown on the display if you insert the CDs

in this unit.

The control panel angles changes as follows:

Changing the control panel

angle

You can change the angle of the control panel to

four positions.

1 Press and hold 0 ( ) until the

angle adjustment screen appears.

The 5 (up) and ∞ (down)

Adj.1

buttons start flashing to teach

you that they can be used for the

next operational steps.

2 Adjust the angle to the position you

want.

Adj.2

Adj.3

Adj.4

CAUTION:

NEVER insert your finger in between the

control panel and the unit, as it may get

caught or hurt.

When using the remote controller

You can change the angle position simply by

pressing ANGLE 5 or ANGLE ∞.

Attaching the control panel

Detaching the control panel

1 Insert the left side of the control

panel into the groove on the panel

holder.

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

2 Press the right side of the control

1 Unlock the control panel.

panel to fix it to the panel holder.

The control panel

comes out toward you.

2 Move the control panel to the right,

Note on cleaning the connectors:

If you frequently detach the control panel, the

then pull it out of the unit.

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

CD CHANGER OPERATIONS

SRC

DISP

T/P

ATT

MODE

SEL

We recommend that you use the JVC MP3-

compatible CD changer with your unit.

Playing discs

Select the CD automatic changer

(CD-CH).

By using this CD changer, you can play back

your original CD-Rs (Recordable) and CD-RWs

(Rewritable) recorded either in audio CD format

or in MP3 format.

• You can also connect other CH-X series

CD changers (except CH-X99 and CH-X100).

However, they are not compatible with MP3

discs, so you cannot play back MP3 discs.

• You cannot use the KD-MK series CD

changers with this unit.

Each time you press the button,

SRC

the source changes as described

on page 7. When you select a

source, the power automatically

comes on.

Playback starts from the first track of the first

disc, and all tracks of all discs are played back.

• When the current disc is an audio CD or a

CD Text disc:

Before operating your CD changer:

• Refer also to the Instructions supplied with

your CD changer.

• If no discs are in the magazine of the CD

changer or the discs are inserted upside

down, “No Disc” will appear on the display. If

this happens, remove the magazine and set

the discs correctly.

• If no magazine is loaded in the CD changer,

“No Magazine” appears on the display. If this

happens, insert the magazine in the CD

changer.

• If “Reset 01” – “Reset 08” appears on the

display, something is wrong with the

connection between this unit and the CD

changer. If this happens, check the

connection and make sure the cords are

connected firmly. Then, press the reset

button of the CD changer.

1 Disc number

2 Disc title/performer (if no title is recorded or assigned,

“No Name” appears.)

3 Track title (if no title is recorded, “No Name”

appears.)

4 Current track number

5 Elapsed playing time of the current track

Note:

You cannot control and play any WMA disc on the CD

changer.

• When the current disc is an MP3 disc:

To go to a particular disc directly

Press the number button corresponding to the

disc number to start its playback (while the CD

changer is playing).

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

To fast-forward or reverse the track

Press and hold ¢

playing a disc, to fast-forward

the track.

, while

1 Disc number

2 Disc type—MP3

3 Album title/performer (or folder name

is set to “Off”—see page 49, or when no Tag is

recorded)

Press and hold

playing a disc, to reverse the

track.

4, while

when “Tag”

4 Track title (or track name

when “Tag” is set to

“Off”—see page 49, or when no Tag is recorded)

5 Current folder number

6 Current track number

Note:

During this operation on an MP3 disc, you can only

hear intermittent sounds. (The elapsed playing time

also changes intermittently on the display.)

7 Elapsed playing time of the current track

To go to the next track or the previous

tracks

To change the display pattern

By pressing DISP (D), you can change the

information shown on the display.

Press ¢

briefly, while

playing a disc, to go ahead to

the beginning of the next track.

Each time you press the button

consecutively, the beginning of

the next tracks is located and

played back.

Each time you press the button, the

display patterns change.

• For details, see page 31.

DISP

If you change the source or turn off the unit

Disc play also stops.

Press

4 briefly, while playing a disc, to go

Next time you select “CD-CH” as the source, disc

play starts from where it has been stopped

previously.

back to the beginning of the current track. Each

time you press the button consecutively, the

beginning of the previous tracks is located and

played back.

To go to a track quickly

This operation is only possible when using

JVC MP3-compatible CD changer CH-X1500.

How to go to the desired track quickly

• Ex. 1: To select track number 32 while

playing track number 6

MODE

1 Press MODE (M) while playing

MODE

a disc.

“Mode” appears on the display,

and the number buttons and 5 (up)/

∞ (down) buttons start flashing.

(Three times)

(Twice)

\ 31 \ 32

Track 6

\ 10 \ 20 \ 30

While playing an audio CD or a CD Text disc:

• Ex. 2 :To select track number 8 while

playing track number 36

MODE

Current track number

See page 40 for this function.

(Three times)

(Twice)

\ 9 \ 8

While playing an MP3 disc:

Track 36 \ 30 \ 20 \ 10

Current folder number

Current track number

2 Press 5 (up) or ∞ (down),

while “Mode” is still on the

display.

First time you press 5 (up) or

∞ (down), the track skips to

the nearest higher or lower track with a track

number of multiple ten (ex. 10th, 20th, 30th).

Then, each time you press the button, you

can skip 10 tracks (see “How to go to the

desired track quickly” that follows).

• After the last track, the first track will be

selected, and vice versa.

• While playing an MP3 disc, this operation is

possible only within a folder.

To skip to the next or previous folder

within a folder (on the same hierarchy level)

Locating a folder on a disc

The following operations are only possible

when playing an MP3 disc using a JVC MP3-

compatible CD changer, CH-X1500.

Example 1

To skip to the next or previous folder

(either on the same or different hierarchy levels)

Example 2

See the hierarchy diagram on page 22.

ONLY on the remote controller:

On the control panel:

PRESET

Press 5 (up) while playing a disc

to skip to the next folder.

Press 3 (right) while playing a disc

to skip to the next folder.

Each time you press the button

consecutively, the next folder

included within the same folder (on

the same hierarchy level) is

Each time you press the button

consecutively, the next folder is

located and the first track in the

folder starts playing.

located (and the first track in the

folder starts playing if recorded).

Press ∞ (down) while playing a disc to skip back

to the previous folder.

Each time you press the button consecutively,

the previous folder is located and the first track in

the folder starts playing.

Press 2 (left) while playing a disc to skip back to

the previous folder.

Each time you press the button consecutively,

the previous folder included within the same

folder (on the same hierarchy level) is located

(and the first track in the folder starts playing if

recorded).

On the remote controller:

PRESET

Press and hold 3 (right) while

playing a disc to skip to the next

folder.

Each time you press and hold the

button consecutively, the next

folder is located and the first track

in the folder starts playing.

Note:

If the folder does not contain any MP3 tracks,

playback will not start (“No Music” appears on the

display). Select another folder.

•

To go back to the root directly, press R D on

Press and hold 2 (left) while playing a disc to

skip back to the previous folder.

the remote controller. You can go back to the

root from any folder.

Each time you press and hold the button

consecutively, the previous folder is located and

the first track in the folder starts playing.

• If tracks are recorded on the disc directly

without putting them into a folder, this unit

starts playing the tracks.

Note:

If the folder does not contain any MP3 tracks, it is

skipped.

While playing an MP3 disc, you can also show

the folder list(s) and track list(s) on the display,

then select a folder or track.

Selecting a disc/folder/track

using the name lists

1 While playing an MP3 disc,

press and hold 5 (up) or

To select a disc using the disc lists

If you forget what discs are loaded in the CD

changer, you can show the disc name list and

select a disc in the list shown on the display.

• The display can show only six names at a time.

∞ (down) until a disc name list

appears on the display.

1 While playing a disc, press and hold

5 (up) or ∞ (down) until a disc name

list appears on the display.

2 Press ¢

4 to

show a folder list of the

current disc or track list of the

current folder.

Each time you press the button, the lists on

the display change as follows:

Note:

If a disc has a disc title (CD Text) or an assigned

disc name, it will be shown on the display.

However, if the disc has not been played before,

its disc number will appear.

Ex. When folder list is selected

2 Press 5 (up) or ∞ (down) to show

the other disc name list, if

necessary.

Ex. When track list is selected

Note:

The display can show only six names at a time. You

can show the other names on the next lists by pressing

5 (up) or ∞ (down).

3 Select the number (1 – 6) for the disc

you want to play.

3 Press the number button for the disc, folder or

track you want to play.

For audio CD and CD Text discs:

Random Disc Random All

Random Off

Selecting playback modes

To play back tracks at random (Random

Play)

You can play back tracks on a disc, on all loaded

discs (or in a folder for MP3 discs) at random.

For MP3 discs:

Random Folder

Random Off

Random Disc

Random All

1 Press MODE (M) while playing a

disc.

MODE

Mode

Plays randomly

“Mode” appears on the display,

then the number buttons and the 5

(up)/∞ (down) buttons start

flashing.

Random Folder*:All tracks of the current folder,

then moves to the next folder and

so on.

• While playing,

lights

While playing an audio CD or a CD Text disc:

up on the display.

Random Disc: All tracks on the disc.

• While playing,

lights

up on the display.

Random All: All tracks of all discs inserted in

the magazine.

• While playing,

Current track number

lights

up on the display.

While playing an MP3 disc:

* “Random Folder” can be used for MP3 discs only.

To cancel Random Play, select “Random Off” by

pressing number button 3 repeatedly or press

number button 4 in step 2.

Current folder number

Current track number

2 Press number button 3, while “Mode” is still

on the display.

Each time you press the button, random play

mode changes as follows:

To play back tracks repeatedly (Repeat Play) To play back only intros (Intro Scan)

You can play back a track, a disc (or a folder for You can play back the first 15 seconds of each

MP3 discs) repeatedly.

track sequentially.

MODE

1 Press MODE (M) while playing a

disc.

1 Press MODE (M) while playing a

disc.

“Mode” appears on the display, then

the number buttons and the 5 (up)/

∞ (down) buttons start flashing.

“Mode” appears on the display, then

the number buttons and the 5 (up)/

∞ (down) buttons start flashing.

2 Press number button 2, while “Mode” is still

on the display.

2 Press number button 1, while “Mode” is still

on the display.

Each time you press the button, repeat play

mode changes as follows:

Each time you press the button, intro scan

mode changes as follows:

For audio CD and CD Text discs:

Repeat Track Repeat Disc

Repeat Off

For audio CD and CD Text discs:

Intro Track

Intro Disc

Intro Off

For MP3 discs:

Intro Track

Intro Off

Intro Folder

Intro Disc

Repeat Folder

Repeat Disc

Repeat Track

Repeat Off

Mode

Plays the beginnings of

Mode

Plays repeatedly

Intro Track :

All tracks of the disc.

• While playing,

up on the display.

Repeat Track : Current (or specified) track.

• While playing,

lights

up on the display.

Intro Folder* : First tracks of all folders of the

Repeat Folder* :All tracks of the current (or

specified) folder.

current disc.

• While playing,

up on the display.

lights

• While playing,

up on the display.

Intro Disc :

First tracks of all inserted discs.

• While playing,

up on the display.

Repeat Disc : All tracks of the current (or

specified) disc.

lights

• While playing,

up on the display.

* “Intro Folder” can be used for MP3 discs only.

* “Repeat Folder” can be used for MP3 discs only.

To cancel Intro Scan, select “Intro Off” by

pressing number button 1 repeatedly or press

number button 4 in step 2.

To cancel Repeat Play, select “Repeat Off” by

pressing number button 2 repeatedly or press

number button 4 in step 2.

EXTERNAL COMPONENT OPERATIONS

SRC

DISP

T/P

ATT

MODE

SEL

Playing an external component

3 Adjust the volume.

You can connect an external components to the

LINE IN plugs on the rear.

ATT

• If you cannot select “LINE IN” as the source,

change the “Line In” setting to “On.” (See page

49.)

4 Select the DSP mode and sound

mode as you want.

1 Select the external component

(LINE IN).

• For the DSP modes, see page 32.

• For the sound (iEQ) modes, see page 35.

Each time you press the

button, the source changes

SRC

Note:

as described on page 7.

When you select a source,

the power automatically

comes on.

When the source is “LINE IN,” the DISP (D) button

will not work.

If you have assigned a different name to the

external component, it will appear.

2 Turn on the connected component

and start playing the source.

DAB TUNER OPERATIONS

SRC

DISP

T/P

ATT

MODE

SEL

We recommend that you use DAB (Digital Audio

Broadcasting) tuner KT-DB1500 or KT-DB1000

with your unit.

If you have another DAB tuner, consult your JVC

IN-CAR ENTERTAINMENT dealer.

• Refer also to the Instructions supplied with

your DAB tuner.

Tuning in to an ensemble and

one of the services

A typical ensemble has 6 or more programmes

(services) broadcast at the same time. After

tuning in to an ensemble, you can select a

service you want to listen to.

1 Select the DAB tuner.

What is DAB system?

Each time you press the button,

DAB is one of the digital radio broadcasting

systems available today. It can deliver CD

quality sound without any annoying

interference and signal distortion.

Furthermore, it can carry text, pictures, and

data.

SRC

the source changes as described

on page 7. When you select a

source, the power automatically

comes on.

Channel number

Ensemble label

In contrast to FM broadcast, where each

programme is transmitted on its own

frequency, DAB combines several

programmes (called “services”) to form one

“ensemble.”

In addition, each “service”—called “primary

service”—can also be divided into its

components (called “secondary service”).

Last received ensemble (service) of the

selected band is tuned in.

2 Select the DAB band (DAB1, DAB2,

or DAB3).

With the DAB tuner connected with this unit,

you can enjoy these DAB services.

1 Press and hold SRC for more

SRC

than 1 second.

The band indication on the

display starts flashing.

2 Within about 5 seconds (wile

DAB1

the band indication is

DAB3

flashing), press SRC again.

Each time you press the

button, the band changes.

DAB2

Note:

This receiver has three DAB bands (DAB1,

DAB2, DAB3). You can use any of them to tune

in to an ensemble.

When noises generated while running

interfere with your listening

3 Start searching for an ensemble.

Press ¢

to search for

While driving, surrounding sounds will interfere

with your listening. Especially the low level

sounds will be hard to listen.

ensembles of higher

frequency.

If this happens, you can reinforce the low level

sounds to improve your listening.

For this purpose, some service provides

Dynamic Range Control signals together with

their regular program signals.

Press

ensembles of lower

frequency.

4 to search for

When an ensemble is received, searching

stops.

MODE

1 Press MODE (M) while listening to

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

a DAB service.

“Mode” appears on the display, and

the number buttons start flashing.

4 Select a service (either primary or

2 Press number button 1 repeatedly to activate

the DRC function while “Mode” is still on the

display.

secondary) you want to listen to.

Press 5 (up) to select the

next service. (If a primary

service has some secondary

services, they are selected

before the next primary

service is selected.)

Press ∞ (down) to select the

previous service (either

primary or secondary).

Each time you press the button, the DRC

function will be set as follows:

To tune in to a particular ensemble

without searching

1 Press SRC repeatedly to select DAB tuner as

the source.

2 Press and hold SRC for more than 1 second.

3 Press SRC repeatedly to select the DAB

band (DAB1, DAB2, or DAB3).

DRC 1

DRC 2

DRC 3

DRC Off

As the number increases, the DRC effect level

also increases.

After about

5 seconds

4 Press and hold ¢

4 for more

The display returns to the source indication

screen.

than one second.

5 Press ¢

4 repeatedly until the

ensemble you want is reached.

• If you hold down the button, the frequency

keeps changing until you release the button.

6 Press 5 (up) or ∞ (down) to select a service

(either primary or secondary) you want to

listen to.

DRC indicator appears

• The DRC indicator will be highlighted

(

) only when the unit received DRC

signals from the tuned service.

To cancel the DRC effect, select “DRC Off.”

Storing DAB services in

memory

5 Press and hold the number button

(in this example, 1) you want to store

the selected service into for more

than 2 seconds.

You can preset up to 6 DAB services in each

DAB band (DAB1, DAB2, and DAB3) manually.

1 Select the DAB tuner.

Each time you press the button,

the source changes as described

SRC

on page 7. When you select a

source, the power automatically

comes on.

The display pattern automatically changes

to the initial display pattern and the preset

number flashes (then the previous display

pattern resumes).

2 Select the DAB band (DAB1, DAB2,

or DAB3).

1 Press and hold SRC for more

SRC

than 1 second.

The band indication on the

display starts flashing.

6 Repeat the above procedure to store

other DAB services into other preset

numbers.

2 Within about 5 seconds (wile

the band indication is

DAB1

flashing), press SRC again.

Each time you press the

button, the band changes.

Notes:

DAB3

• You can only preset primary DAB services. If you

store a secondary service, its primary service will

be stored instead.

DAB2

• A previously preset DAB service is erased when a

new DAB service is stored in the same preset

number.

3 Tune in to an ensemble you want.

Tuning in to a preset DAB

service

4 Select a service of the ensemble you

want to listen to.

Press 5 (up) to select the next

service.

You can easily tune in to a preset DAB service.

Remember that you must store services first. If

you have not stored them yet, “Storing DAB

services in memory.”

Press ∞ (down) to select the

previous service.

1 Select the DAB tuner.

Each time you press the button,

SRC

the source changes as described

on page 7. When you select a

source, the power automatically

comes on.

2 Select the DAB band (DAB1, DAB2,

or DAB3).

1 Press and hold SRC for more

SRC

than 1 second.

The band indication on the

display starts flashing.

The band indication on the

display starts flashing.

2 Within about 5 seconds (while

DAB1

DAB2

the band indication is

DAB3

flashing), press SRC again.

Each time you press the

button, the band changes.

DAB3

flashing), press SRC again.

Each time you press the

button, the band changes.

DAB2

3 Select the number (1 – 6) for the

preset DAB service (primary) you

want.

3 Press and hold 5 (up) or ∞ (down)

until the preset ensemble (primary

service) list for the current band

(DAB1, DAB2, or DAB3) appears on

the display.

Note:

If the selected primary service has some secondary

services, pressing the same number button repeatedly

will tune in to the secondary services.

Selecting a preset service using the

preset service list

If you forget what services are stored in what

preset number, you can check the preset service

list, then select your desired service on the list.

Note:

You can show the other DAB band preset

ensemble (primary service) lists (DAB1, DAB2,

or DAB3) by pressing 5 (up) or ∞ (down).

1 Select the DAB tuner.

4 Select the number (1 – 6) for a

Each time you press the button,

service you want.

SRC

the source changes as described

on page 7. When you select a

source, the power automatically

comes on.

• If you press the button while listening to

any other source than AM

What you can do more with

DAB

– The TP indicator comes to light up when a

service supporting Road Traffic Flash signal

(or an FM RDS station supporting TA signal)

is tuned in by the built-in tuner. This receiver

now stands by for the Road Traffic Flash

signal (or TA signal) reception.

– The TP indicator keeps flashing when a

service supporting Road Traffic Flash signal

(or an FM RDS station supporting TA signal)

is NOT tuned in by the built-in tuner. In this

case, this receiver cannot stand by for Road

Traffic Flash signal (or TA signal) reception.

With the DAB tuner connected, you can use the

following convenient functions.

• Road Traffic Flash Standby Reception

• Standby Reception of 9 types of

Announcement signals

• PTY Standby Reception

• PTY search

• Tracing the same program (service)

automatically while driving where the same

DAB ensemble is not received

How Road Traffic Flash Standby Reception

works:

Road Traffic Flash Standby Reception

If a Road Traffic Flash (or Traffic Announcement)

starts broadcasting while the Road Traffic Flash

Standby Reception is activated, “Traffic Flash”

appears and the unit tunes into the service (or

FM RDS station) broadcasting Road Traffic Flash

(or Traffic Announcement). The volume

increases to the preset TA volume level and the

Road Traffic Flash (or Traffic Announcement) can

be heard.

Press T/P briefly to activate

Road Traffic Flash Standby

Reception.

Each time you press the button,

Road Traffic Flash Standby

Reception turns on and off.

• When this function is turned

on, the TP indicator lights up or

flashes (as follows).

T/P

Using Announcement Standby

Reception

Announcement Standby Reception allows the

unit to switch temporarily to your favorite service

(Announcement type).

TP indicator appears

(either lights up or flashes)

• If you press the button while listening to a

service supporting Road Traffic Flash

signal, the TP indicator lights up.

This receiver now stands by for the Road

Traffic Flash signal reception.

To select your favorite announcement type

for Announcement Standby Reception

When shipped from factory, Announcement

Standby Reception has been set to work for

searching for “Travel” services.

You can select your favorite announcement type

for Announcement Standby Reception.

• If you do not want to change the announcement

type (from “Travel” to another one), go to page

68.

• If you press the button while listening to a

service NOT supporting Road Traffic Flash

signal, the TP indicator flashes.

In this case, Road Traffic Flash Standby

Reception does not work.

– If an FM RDS station supporting TA signal is

tuned in by the built-in tuner. This receiver

stands by for the TA signal reception and the

TP indicator lights up.

To activate Announcement Standby

Reception

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 47 and 48.)

MODE

1 Press MODE (M) while listening to a

DAB service.

“Mode” appears on the display, and

the number buttons start flashing.

SEL

2 Press number button 2 repeatedly to activate

Announcement Standby Reception while

“Mode” is still on the display.

Each time you press the button,

Announcement Standby Reception turns on

and off alternately.

2 Press number button 4 to select

“TUNER”—Tuner category of the

PSM settings.

The “PTY Stnby” (standby) setting screen

appears on the display.

See page 40 for this

function.

Ex.: When the currently selected

announcement type for Announcement

Standby Reception is “Travel”

3 Select “Announce” (announcement).

After about

5 seconds

The display returns to the source indication

screen.

4 Select one of the 9 announcement

types. (See page 68.)

Selected announcement

type appears on the

ATT

display and is stored into

memory.

ANN indicator appears

(either lights up or flashes)

5 Finish the setting.

SEL

CONTINUED ON THE NEXT PAGE

The ANN (announcement) indicator either lights

up or flashes.

• If the ANN indicator lights up, Announcement

Standby Reception is activated.

If a service starts broadcasting a programme of

the selected announcement type, this unit

automatically tunes in to the service.

• If the ANN indicator flashes, Announcement

Standby Reception is not yet activated since

the service being received does not provide

the signals used for Announcement Standby

Reception.

How Announcement Standby Reception

works:

If a service of the selected Announcement type

starts broadcasting while the Announcement

Standby Reception is activated, selected

announcement type appears and the unit tunes

into the service.

Announcement type

To activate Announcement Standby Reception,

you need to tune in to another service

Travel:

Programmes about travel

providing these signals. Press ¢

destinations, package tours, and

travel ideas and opportunities

4 to search for such a service.

When a service providing these signals is

tuned in, the ANN indicator stops flashing and

remains lit. Now Announcement Standby

Reception is activated.

Warning: Warnings about earthquakes,

tsunami, etc.

News:

News

Weather: Weather information

Event:

Information about events, concerts,

etc.

Note:

After turning on Announcement Standby Reception,

you can change the source without canceling

Announcement Standby Reception. In this case, the

ANN indicator stops flashing if it was. If a service

starts broadcasting the selected announcement type,

this unit automatically changes the source and tunes

in to the service.

Special:

Special programmes expanding

on current news or affairs

Radio information

Sport events

Rad Inf:

Sports:

Finance: Reports on commerce, trading,

the Stock Market, etc.

Using PTY Standby Reception

Tracing the same program

automatically (Alternative Reception)

PTY Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) from any source except AM

stations

• Operations are exactly the same as explained

on pages 17 and 18 for FM RDS stations. You

cannot use PTY Standby Reception separately

for the DAB tuner and for the FM tuner.

• PTY Standby Reception works for the DAB

tuner only using a Dynamic PTY, but not a

Static PTY.

You can keep listening to the same program.

• While receiving a DAB service:

When driving in an area where a service

cannot be received, this unit automatically

tunes in to another ensemble or FM RDS

station, broadcasting the same program.

• While receiving an FM RDS station:

When driving in an area where a DAB service

is broadcasting the same program as the

FM RDS station is broadcasting, this unit

automatically tunes in to the DAB service.

To select your favorite PTY code for PTY

Standby Reception, see page 17.

To use Alternative Reception

When shipped from the factory, Alternative

Reception is activated.

• See also “Changing the general settings

(PSM)” on page 46.

1 Press and hold SEL (select) for more than

2 seconds so that one of the PSM items

appears on the display.

2 Press number button 4 to select “TUNER”—

Tuner category of the PSM settings.

To set PTY Standby Reception, see pages 17

and 18.

• You can set PTY Standby Reception when the

source is either “FM” or “DAB.”

Searching your favorite service

You can search any one of the PTY codes (either

Dynamic or Static PTY).

In addition, you can store your 6 favorite

programme types in the number buttons (see

page 18).

3 Press ¢

4 to select “DAB AF”

(alternative frequency).

4 Turn the control dial to select the desired

mode.

• Operations are exactly the same as explained

on pages 18 and 19 for FM RDS stations.

However, you cannot store PTY codes in the

number buttons separately for the DAB tuner

and for the FM tuner.

• On: Traces the program among DAB

services and FM RDS stations

—Alternative Reception. The AF

indicator lights up on the display (see

page 15).

• Off: Alternative Reception is deactivated.

5 Press SEL (select) to finish the setting.

To store your favorite programme (service)

types, see pages 18 and 19.

Note:

To search your favorite programme (service)

type, see page 19.

When Alternative Reception (for DAB services) is

activated, Network-Tracking Reception (for RDS

stations: see page 15) is also activated automatically.

On the other hand, Network-Tracking Reception

cannot be deactivated without deactivating

Alternative Reception.

• Search will be performed on the DAB tuner

only.

Changing the display pattern

By pressing DISP (D), you can change the information shown on the display.

Each time you press the button, the display patterns change as follows:

DISP

• Initial display pattern:

*¹Ensemble label (primary service) indicator: The

different indicator (

) will be displayed when

the secondary service is selected.

TEXT indicator: implies the current service

received is providing DLS (Dynamic Label

Segment—DAB radio text information).

• Ensemble label (name) is emphasized

*³Each service can have several PTY codes. If a

service have several PTY codes, they will be shown

in turn.

• Service label (name) is emphasized

• Dynamic Label Segment (DLS) is display

ADDITIONAL INFORMATION

Sound modes (preset frequency level settings)

The list below shows the preset frequency level settings for each sound mode.

• You can adjust the preset sound modes temporarily. However, your temporary adjustments will

be reset when you select another sound mode.

Sound

Mode

Preset equalizing values

60 Hz

150 Hz

400 Hz

1 kHz

2.4 kHz

6 kHz

12 kHz

Flat

Hard Rock

R & B

+03

+02

+01

+02

+01

+03

+01

+02

+01

+03

+02

+01

+02

+03

+01

–01

Pop

Jazz

+03

+04

+02

+03

+02

+01

–02

DanceMusic

Country

Reggae

Classic

User 1

User 2

User 3

+01

+02

+03

+01

Available characters

In addition to the alphabets (A – Z, a – z), you can use the following characters to assign names to

CDs, and external component. (See page 51.)

• These characters can be also used to show other information such as disc title/performer, RDS,

and DAB on the display.

Accented letters

Numbers and symbols

Lower case

Upper case

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Remedies

Symptoms

Causes

Stop playback while driving on

rough roads.

• Sound is sometimes

interrupted.

You are driving on rough

roads.

Change the disc.

Disc is scratched.

Check the cords and

connections.

Connections are incorrect.

Set it to “On” (see page 49).

• Sound cannot be heard

from the speakers.

The “PowerAmp” setting is set

to “Off.”

Check the cords and

connections.

Connections are incorrect.

Insert the disc correctly.

• CD-R/CD-RW cannot be

Disc is inserted upside down.

played back.

• Insert a finalized

CD-R/CD-RW.

• Tracks on the CD-R/CD-RW CD-R/CD-RW is not finalized.

cannot be skipped.

• Finalize the CD-R/CD-RW

with the component which

you used for recording.

Unlock the disc (see page 30.)

• Disc cannot be ejected.

Disc is locked.

While holding

for more than 2 seconds to eject

the disc.

, press 0

• Disc cannot be recognized

(“No Disc,” “Loading Error,”

or “Eject Error” flashes).

The CD player may function

incorrectly.

Press the reset button on the

control panel using a ball-point

pen (see page 2).

• This unit does not work at

all.

The built-in microcomputer

may have functioned

incorrectly due to noise, etc.

Press the reset button on the

control panel using a ball-point

pen (see page 2). If the reset

button does not work. Check the

installation. (Ex. you have used a

screws which are longer than

specified.)

• When “Reset P00” to “Reset There is something is blocking

P44” appears on the

the control panel movement.

display.

Adjust the output level on the

external component.

•

(INPUT

OVER) indicator appears

on the display.

Input level through the

external component (LINE

IN) is too high.

Remove the control panel, wipe

the connectors, then attach it

again (see page 53).

• “Panel Connect Error”

appears on the display.

The control panel is not

attached correctly and firmly.

Store stations manually.

• SSM automatic preset

Signals are too weak.

does not work.

Connect the antenna firmly.

• Static noise while listening

to the radio.

The antenna is not connected

firmly.

Symptoms

Remedies

Causes

• Download does not seem to

finish.

This is normal (see page 40).

You are trying to download an

animation of many frames.

• Animation does not move.

Wait until the operating

temperature resumes—until

(LOW TEMP.) indicator goes off.

Temperature in the car

compartment is very low—

(LOW TEMP.) indicator

appears.

• “Movie” category settings in

the PSM do not take effect.

• “No Disc” flashes on the

display .

Insert a disc.

No disc in the magazine.

• “Reset 08” flashes on the

display .

Connect this unit and the CD

changer correctly and press the

reset button of the CD changer.

This unit is not connected to a

CD changer correctly.

• “Reset 01” – “Reset 07”

flashes on the display.

Press the reset button of the CD

changer.

• Disc cannot be played back.

Add the extension code—mp3 or

wma to their file names.

MP3/WMA tracks do not have

the extension code—mp3 or

wma in their file names.

Change the disc.

(Record MP3/WMA tracks using

a compliant application.)

MP3/WMA tracks are not

recorded in the format

compliant with ISO 9660 Level

1, ISO 9660 Level 2, Romeo,

or Joliet.

• “Unplayable File” appears

and tracks skip.

Insert a disc that contains tracks

encoded in an appropriate

format.

Tracks are not encoded in an

appropriate format.

This is normal. Copy-protected

tracks cannot be played back.

WMA tracks are copy-

protected.

• Noise is generated.

Skip to another track or change

the disc. (Do not add the

extension code—mp3 or wma to

non-MP3 or WMA files.)

The track played back is not

an MP3/WMA file (although it

has the extension code—mp3

or wma).

• Elapsed playing time is not

correct.

Select another folder.

This sometimes occurs during

play. This is caused by how

the tracks are recorded on the

disc.

• “No Files” appears on the

display for a while, then the

disc ejects.

Insert a disc that contains MP3/

WMA tracks.

The current MP3/WMA disc

does not contain any MP3/

WMA tracks.

• “No Music” appears on the

display.

Select another folder including

MP3/WMA tracks.

No MP3/WMA tracks are

included in the folder.

Insert a disc including MP3 or

WMA tracks.

Only <jml> and/or <jma> files

are recorded on the disc.

• Correct characters are not

displayed. (e.g. album name)

This unit can only display

alphabets (capital: A–Z, small:

a–z), numbers, and a limited

number of symbols.

MAINTENANCE

Handling discs

When playing a CD-R or CD-RW

Before playing back CD-Rs or CD-RWs, read

their instructions or cautions carefully.

• Use only “finalized” CD-Rs or CD-RWs.

• Some CD-Rs or CD-RWs may not play back

on this unit because of their disc

characteristics, and for the following reasons:

– Discs are dirty or scratched.

This unit has been designed to reproduce CDs,

CD-Rs (Recordable), CD-RWs (Rewritable), and

CD Texts.

• This unit is also compatible with MP3 and

WMA discs.

– Moisture condensation on the lens inside the

unit.

– The pickup lens inside the unit is dirty.

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower than

that of regular CDs.

• CD-Rs or CD-RWs are susceptible to high

temperatures or high humidity, so do not leave

them inside your car.

• Do not use following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

How to handle discs

When removing a disc from its

case, press down the center

Center holder

holder of the case and lift the

disc out, holding it by the edges.

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

– Discs on which labels can be directly printed

by an ink jet printer.

To keep discs clean

Using these discs under high temperatures or

high humidity may cause malfunctions or

damage to discs. For example,

– Stickers or labels may shrink and warp a

disc.

– Stickers or labels may peel off so discs

cannot be ejected.

– Print on discs may get sticky.

A dirty disc may not play correctly.

If a disc does become dirty, wipe it

with a soft cloth in a straight line

from center to edge.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

unit may reject the disc.

To remove these rough spots, rub

the edges with a pencil or ball-point pen, etc.

Read instructions or cautions about labels and

printable discs carefully.

CAUTIONS:

• Do not insert 8 cm discs (single CDs) into the

loading slot. (Such discs cannot be ejected.)

• Do not insert any disc of unusual shape—like a

heart or flower; otherwise, it will cause a

malfunction.

• Do not expose discs to direct sunlight or any

heat source or place them in a place subject to

high temperature and humidity. Do not leave

them in a car.

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and leave

the unit turned on for a few hours until the

moisture evaporates.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean discs.

Sticker

Stick-on

Sticker

residue

Warped

disc

Disc

label

SPECIFICATIONS

CD PLAYER SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Type: Compact disc player

Front:

Rear:

50 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Continuous Power Output (RMS):

Front:

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Dynamic Range:

98 dB

Signal-to-Noise Ratio: 102 dB

Wow and Flutter: Less than measurable limit

MP3 (MPEG Audio Layer 3)

Max. Bit rate: 320 Kbps

WMA (Windows Media^®Audio)

Max. Bit rate: 192 Kbps

Rear:

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Equalizer Control Range:

Frequencies: 60 Hz, 150 Hz, 400 Hz,

1 kHz, 2.4 kHz, 6 kHz, 12 kHz

GENERAL

Level:

10 dB

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance:

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature:

0°C to +40°C

LINE IN: 1.5 V/20 kΩ load

Line-Out Level/Impedance:

4.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Dimensions (W × H × D):

Installation Size:

182 mm × 52 mm × 161 mm

Panel Size:

188 mm × 58 mm × 17 mm

Mass: 1.8 kg (excluding accessories)

TUNER SECTION

Frequency Range:

FM: 87.5 MHz to 108.0 MHz

AM: (MW)

(LW)

522 kHz to 1 620 kHz

144 kHz to 279 kHz

Design and specifications are subject to change

without notice.

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity: 16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Haben Sie PROBLEME mit dem Betrieb?

Bitte setzen Sie Ihr Gerät zurück

Siehe Seite Zurücksetzen des Geräts

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

Hebt u PROBLEMEN met de bediening?

Stel het apparaat terug

Zie de pagina met de paragraaf Het apparaat terugstellen

VICTOR COMPANY OF JAPAN, LIMITED

EN, GE, FR, NL

0603MNMMDWJEIN

KD-SH9104/KD-SH9103/

KD-SH9102/KD-SH9101

Installation/Connection Manual

Einbau/Anschlußanleitung

Manuel d’installation/raccordement

Handleiding voor installatie/aansluiting

LVT1005-004B

[E/EX]

0603MNMMDWJEIN

EN, GE, FR, NL

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

• This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems.

• Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt.

• Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE.

• Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met negatieve

aarding.

INSTALLATION

EINBAU

INSTALLATION (MONTAGE

INSTALLATIE (INBOUW IN

(IN-DASH MOUNTING)

(IM ARMATURENBRETT)

DANS LE TABLEAU DE BORD) HET DASHBOARD)

• The following illustration shows a typical installation. • Die folgende Abbildung zeigt einen typischen

• L’illustration suivante est un exemple d’installation

typique. Cependant, vous devez faire les

ajustements correspondant à votre voiture

particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation,

consulter votre revendeur d’autoradios JVC ou une

compagnie d’approvisionnement.

• Op de volgende afbeelding kunt u zien hoe de installatie,

However, you should make adjustments

corresponding to your specific car. If you have any

questions or require information regarding

installation kits, consult your JVC IN-CAR

ENTERTAINMENT dealer or a company supplying

kits.

Einbau. Dennoch müssen Sie entsprechend Ihrem

jeweiligen Auto Anpassungen vornehmen. Bei

irgendwelchen Fragen oder wenn Sie Informationen

hinsichtlich des Einbausatzes brauchen, wenden

Sie sich an ihren JVC Autoradiohändler oder ein

Unternehmen das diese Einbausätze vertreibt.

normaal gesproken, in zijn werk gaat. U moet echter bij

de installatie rekening houden met de bijzonderheden

van uw eigen auto. Neem bij vragen of voor meer

bijzonderheden over inbouwpakketten contact op met uw

JVC car audio dealer of een dealer of een bedrijf dat

inbouwpakketten levert.

1 Before mounting: Press

(control panel

release button) to detach the control panel if

already attached.

1 Vor dem Einbau: Drücken Sie

(Freigabe der 1 Avant le montage: Appuyer sur

(déblocage

du panneau de commande) pour éventeullement

détacher le panneau de commande.

1 Voordat u aan de montage van het apparaat

Schalttafel), um die Arretierung der Schalttafel zu

lösen, sofern diese bereits angebracht ist.

begint: Druk op

(het bedieningspaneel

vrijgeven) als u het bedieningspaneel wilt

loskoppelen indien dit aan de eenheid is

vastgekoppeld.

* Standaard wordt het bedieningspaneel bij het

verlaten van de fabriek los verpackt meegeleverd.

* When shipped from the factory, the control

panel is packed in the hard case.

* Bei der Auslieferung ab Werk ist die Schalttafel

im Etui verpackt.

2 Den Frontrahmen herausnehmen.

* Lorsque ce panneau de commande sort d’usine,

il est rangé dans un étui de transport.

2 Remove the trim plate.

2 Retirer la plaque d’assemblage.

3 Remove the sleeve after disengaging the sleeve 3 Die Halterung nach dem Entriegeln der

3 Libérer les verrous du manchon et retirer le manchon.

2 Verwijder de sierplaat.

locks.

Halterungensperren abnehmen.

1 Das Gerät aufstellen.

1 Poser l’appareil à la verticale.

3 Verwijder het huis nadat u de klemmen hebt

1 Stand the unit.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

losgemaakt.

Note: When you stand the unit, be careful

not to damage the fuse on the rear.

2 Insert the 2 handles between the unit and

the sleeve, as illustrated, to disengage the

sleeve locks.

Hinweis: Beim Aufstellen des Geräts darauf

achten, daß die Sicherung auf der Rückseite

nicht beschädigt wird.

1 Zet het apparaat rechtop.

Opmerking: Wanneer u het apparaat rechtop

zet, moet u erop letten dat u de zekering aan de

achterkant niet beschadigt.

2 Insérer les 2 poignées entre l’appareil et le

manchon comme indiqué pour désengagé les

verrous de manchon.

2 Die 2 Griffe zwischen dem Gerät und der

Halterung wie abgebildet einstecken und die

Halterungensperren entriegeln.

2 Plaats de 2 hendels, zoals afgebeeld, tussen het

apparaat en het huis, om de klemmen los te

maken.

3 Remove the sleeve.

3 Retirer le manchon.

3 Die Halterung entfernen.

Note: Be sure to keep the handles for future

use after installing the unit.

Remarque: S’assurer de garder les poignées

pour une utilisation ultérieur, après l’installation

de l’appareil.

Hinweis: Sicherstellen, daß die Griffe für

künftigen Gebrauch nach dem Einbau des

Geräts aufbewahrt werden.

3 Verwijder het huis.

4 Install the sleeve into the dashboard.

Opmerking: Bewaar de hendels nadat u het

apparaat hebt geïnstalleerd, zodat u ze ook in de

toekomst kunt gebruiken.

4 Installer le manchon dans le tableau de bord.

* After the sleeve is correctly installed into the

dashboard, bend the appropriate tabs to hold

the sleeve firmly in place, as illustrated.

4 Die Halterung im Armaturenbrett einbauen.

* Après installation correcte du manchon dans le

tableau de bord, plier les bonnes pattes pour

maintenir fermement le manchon en place,

comme montré.

* Nach dem korrekten Einbau der Halterung im

Armaturenbrett, die entsprechenden Riegel

umknicken, um die Halterung an ihrem Platz zu

sichern, siehe Abbildung.

4 Installeer het huis in het dashboard.

5 Fix the mounting bolt to the rear of the unit’s

body and place the rubber cushion over the end

of the bolt.

* Nadat het huis op de juiste wijze in het dashboard

is geplaatst, moet u de palletjes, zoals afgebeeld,

stevig op hun plaats duwen.

5 Monter le boulon de montage sur l’arrière du corps

de l’appareil puis passer l’amortisseur en

caoutchouc sur l’extrémité du boulon.

5 Die Befestigungsschraube an der Rückseite des

Gerätekörpers befestigen und das Ende der

Schraube mit einem Gummipuffer abdecken.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

8 Attach the trim plate.

5 Maak de bevestigingsbout aan de achterkant van het

apparaat vast en plaats de rubberdop over het uiteinde

van de bout.

6 Réalisez les connexions électriques.

6 Nehmen Sie die erforderlichen elektrischen

7 Faire glisser l’appareil dans le manchon jusqu’à ce

Anschlüsse vor.

6 Breng de vereiste elektrische verbindingen tot stand.

7 Schuif het apparaat in het huis totdat het vergrendeld is.

8 Bevestig een sierplaat.

9 Attach the control panel.

qu’il soit verrouillé.

7 Das Gerät in die Halterung schieben, bis es einrastet.

8 Befestigen Sie den Frontrahmen.

9 Die Schalttafel anbringen.

8 Attachez la plaque d’assemblage.

9 Remonter le panneau de commande.

9 Bevestig het bedieningspaneel.

Dashboard

3 ^Handle

Griff

Rubber cushion

Gummipuffer

Amortisseur en

caoutchouc

Armaturenbrett

Tableau de bord

Dashboard

Poignée

Hendel

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Rubberdop

184 mm

Sleeve

53 mm

Halterung

Manchon

Mounting bolt

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Huis

Slot

Schlitz

Fente

Fuse

Sicherung

Fusible

Trim plate

Sleeve

Halterung

Manchon

Huis

Frontrahmen

Plaque d’assemblage

Sierplaat

Sleuf

See “ELECTRICAL CONNECTIONS.”

Zekering

Siehe „ELEKTRISCHE ANSCHLÜSSE“.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Lock Plate

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Arretierplättchen

Plaque de verrouillage

Vergrendelingsplaat

Trim plate

Zie “ELEKTRISCHE VERBINDINGEN”.

Frontrahmen

Plaque d’assemblage

Sierplaat

TROUBLESHOOTING

* Are the red and black leads connected correctly?

• Power cannot be turned on.

* Is the yellow lead connected?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded

in common?

• Unit becomes hot.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded

in common?

FEHLERSUCHE

EN CAS DE DIFFICULTES

* Les fils rouge et noir sont-ils racordés correctement? * Zijn de rode en de zwarte draden op de juiste manier

PROBLEMEN OPLOSSEN

• The fuse blows.

• Die Sicherung brennt durch.

* Sind die roten und schwarzen Leitungen richtig

angeschlossen?

• Le fusible saute.

• De zekering slaat door.

aangesloten?

• De stroom kan niet worden ingeschakeld.

* Is de gele draad aangesloten?

• Er komt geen geluid uit de speakers.

* Is de uitgaande speakerdraad kortgesloten?

• Het geluid wordt vervormd.

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

• L’appareil ne peut pas être mise sous tension.

• Stromversorgung kann nicht eingeschaltet werden. * Le fil jaune est-elle raccordée?

* Ist die gelbe Leitung angeschlossen?

• Kein Ton aus den Lautsprechern.

Ist die Lautsprecherausgangsleitung kurzgeschlossen?

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

• Le son est déformé.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

• Ton verzerrt.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• L’appareil devient chaud.

• Gerät wird heiß.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

• Het apparaat raakt verhit.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

D Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant /

Verbinden met de stuurwiel-afstandsbediening

OE remote adapter (not supplied)

Steering wheel remote input

Radio-Lenkrad-Fernbedienungsadaption

Eingang für Lenkradfernbedienung

Entrée de la télécommande de volant

Ingang stuurwiel-afstandsbediening

If your car is equipped with the steering wheel remote controller, you can operate this receiver using the

controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult

your JVC IN-CAR ENTERTAINMENT dealer for details.

(nicht im Lieferumfang enthalten)

Adaptateur pour télécommande au volant (non fourni)

Adapter voor stuurwiel-afstandsbediening (niet bijgeleverd)

Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver steuern.

Hierfür ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC (nicht im

Lieferumfang enthalten) erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC Autoradiohändler.

Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant la

télécommande. Pour le faire, un adaptateur pour télécommande au volant (non fourni) correspondant à votre

voiture est nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.

Indien uw auto een stuurwiel-afstandsbediening heeft, kunt u deze receiver met die afstandsbediening bedienen. Hiervoor

heeft u echter een JVC adapter voor stuurwiel-afstandsbediening (niet bijgeleverd) nodig die geschikt is voor uw auto.

Raadpleeg uw JVC car audio dealer voor details.

KD-SH9104/

KD-SH9103/

KD-SH9102/

KD-SH9101

Steering wheel remote controller (equipped in the car)

Lenkradfernbedienung (im Fahrzeug installiert)

Télécommande de volant (installée dans la voiture)

Stuurwiel-afstandsbediening (in de auto)

• When using the optional stay / Beim Verwenden der

Anker-Option / Lors de l’utilisation du hauban en option

/ Wanneer u de steun gebruikt (facultatief)

• When installing the unit without using the sleeve / Beim Einbau des Geräts ohne

Halterung / Lors de l’installation de l’appareil scans utiliser de manchon / Wanneer u

het apparaat zonder huis installeert

Fire wall

Stay (option)

In a Toyota for example, first remove the car radio and install the unit in its place.

Feuerwand

Anker (Option)

Hauban (en option)

Steun (facultatief)

Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.

Cloison

Washer

Unterlegscheibe

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.

* Not included with this unit.

* Nicht Teil dieses Geräts.

* Non fourni avec cet appareil.

Brandscherm

Rondelle

Sluitring

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Lock nut

Sicherungsmutter

Ecrou d’arrêt

Contra-moer

* Niet meegeleverd.

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Bracket*

Konsole*

Support*

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Screw (option)

Schraube (Option)

Vis (en option)

Console*

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Schroef (facultatief)

Pocket

Taschen

Poche

Zak

Bracket*

Konsole*

Support*

Console*

Mounting bolt

Sleeve

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Halterung

Manchon

Huis

Note

: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws are

used, they could damage the unit.

Install the unit at an angle of less than 30˚.

Stellen Sie das Gerät mit einem Winkel von

weniger als 30˚ auf.

Installez l’appareil avec un angle de moins de 30˚.

Installeer het toestel met een hoek kleiner dan 30˚.

Hinweis

: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben verwendet werden. Werden

längere Schrauben verwendet, können sie das Gerät beschädigen.

Less than 30˚

Weniger als 30˚

Moins de 30˚

Kleiner dan 30˚

Remarque : Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une longueur de 6 mm. Si

des vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Opmerking : Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven gebruiken. Als u langere

schroeven gebruikt, kan het apparaat worden beschadigd.

Removing the unit

^•1^BeR^foe^rm^eo^reve^mt^oh^veⁱⁿc^gon^thtr^eo^ul pⁿa^it,n^re^el.^{lease the rear section.}

Ausbau des Geräts

• Vor dem Ausbau des Geräts den hinteren Teil

Retrait de l’appareil

Verwijderen van het apparaat

• Voordat u het apparaat verwijdert, moet u het

1^achV^te^er^rw^geij^dd^ee^er^lth^ee^lt^ob^se^md^aie^kn^eiⁿn^.gspaneel.

^•1^AvR^aeⁿt^tir^de^er l^re^etp^ira^en^rn^l’e^aa^pu^pad^re^eic^l,o^lm^ibém^ra^en^rd^lae.^{section arrière.}

1^freD^ige^en^bS^ecⁿh^.alttafel abnehmen.

Remove the trim plate.

Retirer la plaque d’assemblage.

Den Frontrahmen herausnehmen.

Verwijder de sierplaat.

Insert the 2 handles into the slots, as shown.

Introduire les 2 poignées dans les fentes, comme

montré. Puis, tout en tirant doucement les

poignées écartées, faire glisser l’appareil pour le

sortir. (S’assurer de conserver les poignées

après l’installation de l’appareil.)

Then, while gently pulling the handles away from 3 Die 2 Griffe in die Schlitze wie gezeigt stecken.

Plaats de 2 hendels, zoals afgebeeld, in de sleuven.

Daarna duwt u de hendels zachtjes uit elkaar en kunt u

het apparaat naar buiten schuiven. (Bewaar de

hendels nadat u het apparaat hebt

geïnstalleerd!)

each other, slide out the unit. (Be sure to keep

Dann die Griffe behutsam auseinander ziehen

und das Gerät herausziehen. (Die Griffe nach

dem Einbau auf jeden Fall aufbewahren.)

the handles after installing it.)

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Handle

Griff

Poignée

Hendel

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Parts list for installation and

Teileliste für den Einbau und

Liste des pièces pour l’installation et Lijst van onderdelen die u bij

connection

Anschluß

raccordement

installatie en aansluiting nodig hebt

De volgende onderdelen worden bij het apparaat geleverd.

Installeer ze op de juiste wijze, nadat u ze hebt

The following parts are provided with this unit.

After checking them, please set them correctly.

Die folgenden Teile werden zusammen mit diesem

Gerät geliefert.

Nach ihrer Überprüfung, die Teile richtig einsetzen.

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

gecontroleerd.

Remote controller

Hard case/Control panel

Etui/Schalttafel

Etui de transport/Panneau

de commande

Power cord

Stromkable

Cordon d’alimentation

Stroomkabel

Sleeve

Trim plate

Fernbedienung

Télécommande

Afstandsbediening

Halterung

Manchon

Huis

Frontrahmen

Plaque d’assemblage

Sierplaat

Behuizing/Bedieningspaneel

Battery

Batterie

Pile

CR2025

Batterij

Lock nut (M5)

Mounting bolt (M5 x 20 mm)

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Washer (ø5)

Sicherungsmutter (M5)

Ecrou d’arrêt (M5)

Contra-moer (M5)

Befestigungsschraube (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Bevestigingsbout (M5 x 20 mm)

Unterlegscheibe (ø5)

Rondelle (ø5)

Sluitring (ø5)

CD-ROM (Image Converter)

Handles

Griffe

Poignées

Hendels

CD-ROM (Image Converter)

ELECTRICAL CONNECTIONS

ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN

To prevent short circuits, we recommend that you

Zur Vermeidung von Kurzschlüssen empfehlen wir,

Pour éviter tout court-circuit, nous vous

Om kortsluiting te voorkomen adviseren wij u om de

minpool van de accu los te maken en alle elektrische

verbindingen tot stand te brengen voordat u het apparaat in

disconnect the battery’s negative terminal and make all daß Sie den negativen Batterieanschluß abtrennen

recommandons de débrancher la borne négative de

la batterie et d’effectuer tous les raccordements

electrical connections before installing the unit. If you

are not sure how to install this unit correctly, have it

installed by a qualified technician.

und alle elektrischen Anschlüsse herstellen, bevor

das Gerät eingebaut wird. Sind Sie sich über den

richtigen Einbau des Geräts nicht sicher, lassen Sie

es von einem qualifizierten Techniker einbauen.

électriques avant d’installer l’appareil. Si l’on n’est pas de auto installeert. Als u niet zeker weet hoe u dit apparaat

sûr de pouvoir installer correctement cet appareil, le

faire installer par un technicien qualifié.

moet installeren, kunt u dit beter door een daartoe

gekwalificeerde technicus laten doen.

Note:

This unit is designed to operate on 12 V DC,

Hinweis:

Remarque:

Opmerking:

NEGATIVE ground electrical systems. If your vehicle Dieses Gerät ist für einen Betrieb in elektrischen

Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE. Si votre véhicule n’offre pas ce type

d’alimentation, il vous faut un convertisseur de

tension, que vous pouvez acheter chez un revendeur

d’autoradios JVC.

Dit apparaat mag worden gebruikt bij elektrische systemen

die werken op 12 V gelijkstroom met negatieve

aarding. Als uw auto niet is uitgerust met een dergelijk

systeem, is een spanningsomzetter vereist. Dit instrument

kan worden aangeschaft bij JVC car audio dealers.

does not have this system, a voltage inverter is

required, which can be purchased at JVC IN-CAR

ENTERTAINMENT dealers.

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt. Verfügt Ihr Fahrzeug nicht über diese

Anlage, ist ein Spannungsinverter erforderlich, der

bei JVC Autoradiohändler erworben werden kann.

• Die Sicherung mit einer der entsprechenden

Nennleistung ersetzen. Brennt die Sicherung

häufig durch, wenden Sie sich an ihren JVC

Autoradiohändler.

• Replace the fuse with one of the specified rating. If

the fuse blows frequently, consult your JVC IN-CAR

ENTERTAINMENT dealer.

• If noise is a problem...

This unit incorporates a noise filter in the power

• Vervang de zekering door een exemplaar met het

aangegeven vermogen. Als de zekering vaak doorslaat,

moet u uw JVC car audio dealer raadplegen.

• Als u geluidsproblemen hebt…

De krachtschakeling van dit apparaat heeft een ingebouwd

geluidsfilter. In sommige voertuigen zijn tikgeluiden of

andere ongewenste geluiden te horen. Als dit gebeurt,

moet u de massaklem aan de achterkant (zie

aansluitingsschema) aan het chassis van de auto

vastmaken met behulp van een kortere en dikkere kabel,

zoals kopermanteldraad of tellerkabel. Als het geluid niet

verdwijnt, moet u contact opnemen met uw JVC car audio

dealer.

• Remplacer le fusible par un de la valeur précisée. Si

le fusible saute souvent, consulter votre revendeur

d’autoradios JVC.

circuit. However, with some vehicles, clicking or other • Sind Störgeräusche ein Problem...

• Si le bruit est un problème...

unwanted noise may occur. If this happens, connect

the unit’s rear ground terminal (see connection

diagram) to the car’s chassis using shorter and

thicker cords, such as copper braiding or gauge wire.

If noise still persists, consult your JVC IN-CAR

ENTERTAINMENT dealer.

Dieses Gerät enthält ein Störfilter im Stromkreis. Bei

Cet appareil incorpore un filtre de bruit dans le

circuit d’alimentation. Cependant, avec certains

véhicules, quelques claquements ou autres bruits

non désirés risquent de se produire. Si cela arrive,

raccorder la borne arrière de masse de l’appareil

au châssis de la voiture (voir le diagramme de

raccordement) en utiliscant des cordons les plus

gros et les plus courts possibles telle qu’une barre

de cuivre ou une tresse. Si le bruit persiste,

consulter votre revendeur d’autoradios JVC.

• La puisscance admissible des enceintes devrait

manchen Fahrzeugen kann jedoch ein Klicken

oder andere unerwünschte Störgeräusche

auftreten. Sollte das der Fall sein, die hintere

Erdungscanschlußklemme (siehe Schaltplan) des

Geräts am Fahrwerk des Fahrzeugs anschließen,

dabei kürzere und dickere Kabel wie

• Maximum input of the speakers should be more than

50 W at the rear and 50 W at the front, with an

impedance of 4 Ω to 8 Ω.

beispielsweise Kupfergeflechtdraht oder Stahldraht

verwenden. Bleibt Störgeräusch bestehen, wenden

Sie sich an Ihren JVC Autoradiohändler.

• Het maximum ingangsvermogen van de speakers moet

achterin meer dan 50 W zijn en voorin 50 W, met een

impedantie van 4 Ω tot 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be careful • Die maximale Eingangsleistung der Lautsprecher

not to touch it when removing this unit.

sollte mehr als 50 W hinten und 50 W vorn bei einer

Impedanz von 4 Ω bis 8 Ω betragen.

supérieure à 50 W à l’arrière et à 50 W l’avant, avec • Zorg ervoor dat dit apparaat door middel van een

une impédance de 4 Ω à 8 Ω.

aardkabel is verbonden met het chassis van de

auto.

• De warmte-opnemer kan na gebruik erg heet worden.

Raak de warmte-opnemer niet aan wanneer u dit apparaat

van zijn plaats haalt.

• Sicherstellen, daß das Gerät am Fahrwerk

geerdet wird.

• S’assurer de raccorder la mise à la masse de

cet appareil au châssis de la voiture.

• Le dissipateur de chaleur devient très chaud après

usage. Faire attention de ne pas le toucher en

retirant cet appareil.

Heat sink

Abstrahlblech

Dissipateur de chaleur

Warmte-opnemer

• Das Abstrahlblech wird nach dem Gebrauch sehr

heiß. Beim Ausbau des Geräts darauf achten, das

Abstrahlblech nicht zu berühren.

Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden

Twist the core wires when connecting.

Die Kerndrähte beim Anschließen verdrehen.

Torsader les âmes des fils en les raccordant.

Draai de kerndraden om elkaar heen

Solder the core wires to connect them

securely.

Die Kerndrähte anlöten, um sie fest

anzuschließen.

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT VERWENDETEN Leitungen

mit Isolierklebeband umwickeln.

wanneer u ze wilt aansluiten.

• Pour éviter les court-circuits, couvrir les bornes des fils

qui ne sont PAS UTILISÉS avec de la bande isolante.

• Om kortsluiting te voorkomen, moet u de

aansluitklemmen van ONGEBRUIKTE

gekleurde draden met isolatieband bedekken.

Souder les âmes des fils pour les raccorder

entre eux de façon sûre.

Soldeer de kerndraden zodat ze stevig vast

zitten.

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

For some VW/Audi or Opel (Vauxhall) automobile

Für manche VW/Audi oder Opel (Vauxhall) Fahrzeuge

Pour certaine voiture VW/Audi ou Opel (Vauxhall)

Voor bepaalde modellen VW/Audi of Opel (Vauxhall) geldt

You may need to modify the wiring of the supplied power cord as illustrated.

• Contact your authorized car dealer before installing this unit.

Sie müssen evtl. die Verdrahtung des mitgelieferten Stromkabels wie abgebildet ändern.

• Wenden Sie sich an Ihre Vertragswerkstatt, bevor Sie das Gerät einbauen.

Vous aurrez peut-être besoin de modifier le câblage du cordon d’alimentation fourni comme montré sur l’illustration.

• Contactez votre revendeur automobile autorisé avant d’installer l’appareil.

A If your car is equipped with the ISO connecter

Wenn Ihr Auto mit ISO-Steckern ausgestattet ist

Si votre voiture est équippée d’un connecteur ISO

Indien uw auto is uitgerust met de ISO-connector

• Connect the ISO connectors as illustrated.

• Die ISO-Stecker wie abgebildet anschließen.

• Connectez les connecteurs ISO comme montré sur l’illustration.

• Sluit de ISO-connectoren aan zoals op het voorbeeld is aangegeven.

From the car body

Wellicht moet u de bedrading van het meegeleverde snoer als in het voorbeeld aanpassen.

• Neem contact op met uw offici’le autodealer alvorens dit apparaat te installeren.

Von der Karosserie

De la carrosserie de la voiture

Yellow/Gelb/Jaune/Geel

Vanaf de auto

Original wiring

Originalverdrahtung

Câblage original

Originele bedrading

Red/

Rot/

Red/Rot/Rouge/Rood

ISO connector

ISO-Stecker

Connecteur ISO Rood

Rouge/

Red/Rot/Rouge/Rood

ISO-connector

ISO connector of the supplied power cord

ISO-Stecker am Stromkabel

Yellow/Gelb/Jaune/Geel

Use modified wiring 2 if the unit does not turn on.

Geänderte Verdrahtung 2 verwenden, wenn das

Gerät so nicht an geht.

Utilisez le câblage modifié 2 si l’appareil ne se met

pas sous tension.

Pas de bedrading 2aan indien het apparaat niet reageert

bij inschakelen.

Yellow/Gelb/Jaune/Geel

Red/Rot/Rouge/Rood

Yellow/Gelb/Jaune/Geel

Modified wiring 1

Geänderte

Connecteur ISO pour le cordon

d’alimentation fourni

Verdrahtung 1

ISO-connector van het meegeleverde snoer

Câblage modifié 1

Aangepaste bedrading 1

Red/Rot/

Rouge/Rood

Red/Rot/Rouge/Rood

Yellow/Gelb/Jaune/Geel

Modified wiring 2

Geänderte

View from the lead side

Ansicht von der Leitungsseite

Vue à partir du côté des fils

Aanzicht vanaf het snoer

Verdrahtung 2

Câblage modifié 2

Aangepaste bedrading 2

Red/Rot/

Rouge/Rood

Red/Rot/Rouge/Rood

B Connections without using the ISO connecters / Anschlüsse ohne ISO-Stecker / Connexions sans l’utilisation des connecteurs ISO / Verbindingen

zonder ISO-connectoren

Before connecting: Check the wiring in the vehicle

carefully. Incorrect connection may cause serious

damage to this unit.

Vor dem Anschließen: Die Verdrahtung im Fahrzeug

sorgfältig überprüfen. Falsche Anschlüsse können

ernsthafte Schäden am Gerät hervorrufen.

Die Leiter des Stromkabels und die Leiter des

Anschlusses im Fahrzeug können sich farblich

unterscheiden.

Avant de commencer la connexion: Vérifiez

Alvorens de verbindingen tot stand te brengen:

Moet u de bedrading in de auto zorgvuldig. Het apparaat kan

door verkeerde verbindingen ernstige schade oplopen.

attentivement le câblage du véhicule. Une connexion

incorrecte peut endommager sérieusement l’appareil.

The leads of the power cord and those of the connector

from the car body may be different in colour.

Le fil du cordon d’alimentation et ceux des connecteurs De draden van het stroomsnoer verschillen mogelijk van

du châssis de la voiture peuvent être différents en couleur. kleur metde aansluitingen op het chassis van de auto.

1 Cut the ISO connector.

1 Coupez le connecteur ISO.

1 Knip de ISO-connector los.

1 Den ISO-Stecker abschneiden.

2 Connect the colored leads of the power cord to the

car battery, speakers and power aerial (if any) in the

following sequence.

2 Connectez les fils de couleur du cordon

d’alimentation à la batterie de la voiture, aux

enceintes et à l’antenne automatique (s’il y en a

une) dans l’ordre suivant.

2 Sluit de gekleurde snoerdraden van de stroomkable in de

hierna genoemde volgorde aan op de accu van de auto,

de luidsprekers en de antenne (indien aanwezig).

2 Die farbigen Leitungen des

Spannunsgversorgungskabels an der Autobatterie,

den Lautsprechern und dem Motorantenne (sofern

vorhanden) in folgender Reihenfolge anschließen.

1 Schwarz: Erdung

1 Black: ground

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to the remote lead of other

equipment or power aerial if any (200 mA max.)

5 Orange with white stripe: to car light control

switch

6 Brown: to cellular phone system (for details, refer

to the instructions of the cellular phone.)

7 Others: to speakers

1 Zwart: aarde

1 Noir: à la masse

2 Geel: naar de accu van de auto (constant 12 V)

3 Rood: naar de aansluitklem van de accessoire

4 Blauw met witte streep: naar afstandsdraad van

andere apparatuur of antenne met circuit indien

aanwezig (200 mA max.)

2 Jaune: à la batterie de la voiture (12 V constant)

3 Rouge: à une borne accessoire

4 Bleu avec bande blanche: au fil de

télécommande de l’autre appareil ou à l’antenne

automatique s’il y en a une (200 mA max.)

5 Orange avec bande blanche: à l’interrupteur

d’éclairage de la voiture

2 Gelb: an Autobatterie (konstant 12 V)

3 Rot: zur einer Zubehöranschlußklemme

4 Blau mit weißem Streifen: zum Zusatzkabel des

anderen Geräts oder der Motorantenne, sofern

vorhanden (max. 200 mA)

5 Oranje met witte streep: naar de schakelaar voor de

autoverlichting

5 Orange mit weißem Streifen: zur Autolichtschalter

6 Braun: zur Mobiltelefon (weitere informationen

entnehmen Sie bitte der Bedienungscanleitung

des Mobiltelefons.)

6 Bruin: naar het mobiele-telefoonsysteem (lees voor

meer informatie de instructies die bij de mobiele

telefoon worden geleverd.)

6 Marron: à un système de téléphone cellulaire

(pour les détails, se référer aux instructions du

téléphone cellulaire.)

3 Connect the aerial cord.

7 Andere: naar de speakers

4 Finally connect the wiring harness to the unit.

7 Andere: zur Lautsprecher

7 Autres: aux enceintes

3 Sluit de antenne aan.

3 Das Antennenkabel anschließen.

3 Connectez le cordon d’antenne.

4 Verbind de draadbundel daarna met het apparaat.

4 Die Kabelbäume am Gerät anschließen.

4 Finalement, connectez le faisceau de fils à l’appareil.

Cut the ISO connector

Den ISO Stecker abscheiden

Coupez le connecteur ISO

Knip de connector ISO

To aerial

Zur Antenne

JVC CD changer or DAB

tuner

We recommend you to connect the JVC MP3 compatible CD changer. You can also connect other CH-X series CD

changers (except CH-X99 and CH-X100). See diagram C .

CD-Wechsler von JVC oder

DAB-Tuner

• You cannot use the KD-MK series CD changers with this unit.

Changeur CD JVC ou Tuner

DAB

JVC CD-wisselaar of DAB-tuner

Wir empfehlen Ihnen, den MP3-kompatiblen CD-Wechsler von JVC anzuschließen. Sie können auch andere CD-Wechsler

der Serie CH-X anschließen (außer CH-X99 und CH-X100). Siehe Schaltplan C .

• CD-Wechsler der Serie KD-MK können mit diesem Gerät nicht verwendet werden.

A l’antenne

Naar de antenne

Aerial terminal

Antennenanschlußklemme

Borne de l’antenne

Aansluitpunt antenne

Nous vous recommandons de connecter le changeur de CD compatible MP3 JVC. Vous pouvez aussi connecter d’autres

changeurs de CD de la série CH-X (sauf le CH-X99 et le CH-X100). Voir le diagramme C .

• Vous ne pouvez pas utiliser les changeurs de CD de la série KD-MK avec cet appareil.

Sluit bij voorkeur de JVC, MP3 compatibele CD-wisselaar aan. U kunt tevens bepaalde andere CD-wisselaars uit de CH-X serie aansluiten

(uitgezonderd de CH-X99 en CH-X100). Zie schema C .

• U kunt CD-wisselaars uit de KD-MK serie niet met dit toestel gebruiken.

15 A fuse

Rear ground

terminal

Hintere

Erdungscan–

schlußklemme

Borne arrière de

masse

Massaklem aan de

achterkant

15 A Sicherung

Fusible 15 A

Zekering 15 A

Black

Schwarz

Noir

Ignition switch

Zündschalter

Interrupteur d’allumage

Contactschakelaar

Not included with this unit / Wird nicht mit Gerät mitgeliefert /

LINE IN

LINE OUT

Non fourni avec cet appareil / Niet bij het apparaat inbegrepen

To metallic body or chassis of the car

SUBWOOFER OUT

(see diagram C )

(siehe Schaltplan C )

(voir le diagramme C )

(zie schema C )

Zwart

Zur metallenen Karosserie oder zum Fahrwerk des Autos

Au corps métallique ou châssis de la voiture

Naar metalen ondergrond of chassis van de auto

Yellow

Gelb*¹

Jaune*¹

Geel *¹

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch)

Zur einer stromführenden Anschlußklemme im Sicherungsblock zum

To steering wheel remote controller (see diagram D )

An Lenkradfernbedienung (siehe Schaltplan D )

Anschließen an die Autobatterie (Umgehen des Zündschalters)

À une borne sous tension du porte-fusible connectée à la batterie de la

voiture (en dérivant l’interrupteur d’allumage)

^{Pour la télécommande de volant (voir le diagramme D )}2

Red

Rot

Rouge

Rood

Naar stuurwiel-afstandsbediening (zie schema D )

Naar een onder spanning staande aansluitklem in het zekeringblok die is

aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)

Fuse block

^O3

To an accessory terminal in the fuse block

Sicherungsblock

Porte-fusible

Zekeringblok

Zur einer Zubehöranschlußklemme im Sicherungsblock

Before checking the operation of this unit prior to installation,

this lead must be connected, otherwise power cannot be

turned on.

Vor der Überprüfung der Funktionsfähigkeit des Geräts vor

dem Einbau, muß diese Leitung angeschlossen werden, da

sonst die Stromversorgung nicht eingeschaltet werden

kann.

Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil ne peut

pas être mis sous tension.

Voordat u controleert of het apparaat werkt (alvorens het te

installeren), moet deze draad aangesloten zijn. Als dit niet het

geval is, kan de stroom niet worden ingeschakeld.

À une borne accessoire du porte-fusible

Naar een aansluitklem in het zekeringblok

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To the remote lead of other equipment or power aerial if any

Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig

Orange with white stripe

Orange mit weißem Streifen

Orange avec bande blanche

Oranje met witte streep

To car light control switch

Zur Autolichtschalter

À l’interrupteur d’éclairage de la voiture

(ILLUMINATION)

Naar de schakelaar voor de autoverlichting

To cellular phone system

Zur Mobiltelefon

À un système de téléphone cellulaire

Naar het mobiele-telefoonsysteem

Brown / Braun / Marron / Bruin

Gray with black stripe

White with black stripe

Weiß mit schwarzem Streifen

Blanc avec bande noire

Wit met zwarte streep

White

Weiß

Blanc

Wit

Gray

Green with black stripe

Green Purple with black stripe

Purple

Lila

Violet

Paars

Grau mit schwarzem Streifen

Gris avec bande noire

Grijs met zwarte streep

Grau Grün mit schwarzem

Grün Lila mit schwarzem

Gris

Grijs

Streifen

Vert avec bande noire

Groen met zwarte streep

Vert

Streifen

Groen Violet avec bande noire

Paars met zwarte streep

Right speaker (rear)

Rechter Lautsprecher

(hinten)

Enceinte droit (arrière)

Rechterspeaker (achterin)

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Linker Lautsprecher (vorne)

Enceinte gauche (avant)

Linkerspeaker (voorin)

Rechter Lautsprecher (vorne)

Enceinte droit (avant)

Rechterspeaker (voorin)

Linker Lautsprecher (hinten)

Enceinte gauche (arrière)

Linkerspeaker (achterin)

Instal_SH9101_004A_2[F].p65

03.3.3, 10:48

PRECAUTIONS on power supply and VORSICHTSMASSREGELN beim

PRECAUTIONS sur l’alimentation et

VOORZORGSMAATREGELEN bij het

verbinden van de

speaker connections:

Anschließen der Stromversorgung

la connexion des enceintes:

• NE CONNECTEZ PAS les fils d’enceintes du

cordon d’alimentation à la batterie; sinon,

l’appareil serait sérieusement endommagé.

• Connectez correctement le fil noir (a la masse), le fil

jaune (a la batterie de la voiture,12 V constant) et le

fil rouge (à la prise accessoire).

• DO NOT connect the speaker leads of the power

cord to the car battery; otherwise, the unit will

be seriously damaged.

• Connect the black lead (ground), yellow lead (to car

battery, constant 12 V), and red lead (to an

accessory terminal) correctly.

• BEFORE connecting the speaker leads of the

power cord to the speakers, check the speaker

wiring in your car.

– If the speaker wiring in your car is as

illustrated in Fig. 1 and Fig. 2 below, DO NOT

connect the unit using that original speaker

wiring. If you do, the unit will be seriously

damaged.

Redo the speaker wiring so that you can connect

the unit to the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as

illustrated in Fig. 3, you can connect the unit

using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your car,

consult your car dealer.

und Lautsprecher:

stroomkabeldraad met de speakers:

• Verbind de speakerdraden van de stroomkabel

NIET met de accu van de auto; als u dit wel doet,

zal het apparaat ernstige schade oplopen.

• Sluit de zwarte draad (aarde), de gele draad (naar de accu

van de auto, constant 12 V) en de rode draad (naar de

aansluitklem van de accessoire) op de juiste wijze aan.

• VOORDAT u de speakerdraden van de stroomkabel met

de speakers verbindt, moet u de bedrading van de

speakers in uw auto controleren.

• Die Lautsprecherleitungen des Netzkabels

NICHT an der Autobatterie anschließen, da

sonst das Gerät schwer beschädigt wird.

• Die schwarze Leitung (Erdung), die gelbe Leitung

(zur Autobatterie, konstant 12 V) und die rote

Leitung (zur Zubehöranschlußklemme) richtig

anschließen.

• AVANT de connecter les fils d’enceintes du cordon

d’alimentation aux enceintes, vérifiez le câblage

des enceintes de votre voiture.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 1 ou Fig. 2

ci-dessous, NE CONNECTEZ PAS l’appareil en

utiliscant ce câblage original des enceintes. Si

vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de façon

que vous puissiez connecter l’appareil aux

enceintes comme montré sur la Fig. 3.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 3, vous pouvez

connecter l’appareil en utiliscant ce câblage

original d’enceintes pour votre voiture.

• VOR dem Anschließen der Lautsprecherleitungen

des Spannunsgversorgungskabels an die

Lautsprecher, die Lautsprecherverdrahtung in Ihrem

Auto überprüfen.

– Ist die Lautsprecherverdrahtung wie unten in

“Fig. 1” und “Fig. 2” abgebildet, das Gerät

NICHT mit der Originalverdrahtung der

Lautsprecher anschließen, da sonst das Gerät

schwer beschädigt wird.

Die Lautsprecherverdrahtung erneuern, so daß Sie

das Gerät an den Lautsprechern wie in “Fig. 3”

abgebildet anschließen können.

– Ist die Lautsprecherverdrahtung in Ihrem Auto

wie in “Fig. 3” abgebildet, können Sie das Gerät

mit der Originalverdrahtung der Lautsprecher in

Ihrem Auto anschließen.

– Als de bedrading van de speakers eruitziet

zoals hieronder staat afgebeeld in Fig. 1 en

Fig. 2, mag het apparaat NIET worden aangesloten

met behulp van deze oorspronkelijke

speakerbedrading. Als u dat wel doet, zal het apparaat

ernstige schade oplopen.

Pas de bedrading van de speakers aan, zodat u het

apparaat met de speakers kunt verbinden, zoals staat

afgebeeld in Fig. 3.

– Als de bedrading van de speakers eruitziet

zoals staat afgebeeld in Fig. 3, kunt u het

apparaat aansluiten met behulp van de oorspronkelijke

speakerbedrading in uw auto.

– Si vous n’êtes pas sûrs du câblage d’enceintes de

votre voiture, consulter le concessionnaire de

votre voiture.

– Als u twijfels hebt over de speakerbedrading in uw

auto, moet u contact opnemen met uw autodealer.

– Sind Sie sich über die Lautsprecherverdrahtung

in Ihrem Auto nicht sicher, wenden Sie sich an

Ihren Autohändler.

Fig. 1

Fig. 2

Fig. 3

C Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /

Aansluitingen voor het toevoegen van andere apparatuur

Amplifier / Verstärker / Amplificateur / Versterker

You can connect an amplifier and other equipment to

Sie können einen Verstärker oder ein anderes Gerät

anschließen, um Ihre Autostereoanlage zu erweitern.

• Schließen Sie das Fernbedienungskabel (blau mit

weißem Streifen) an das Fernbedienungskabel des

anderen Geräts an, so daß es über dieses Gerät

gesteuert werden kann.

Vous pouvez connecter un amplificateur ou autre

appareil pour améliorer votre système autoradio.

• Connectez le fil de commande à distance (bleu

avec bande blanche) au fil de commande à distance

de l’autre appareil de façon qu’il puisse être

commandé via cet appareil.

Het is mogelijk om uw autostereosysteem uit te breiden met

een versterker of andere apparatuur.

• Verbind de externe kabel (blauw met witte streep) met de

externe kabel van het andere apparatuur zodat deze op

afstand vanaf deze apparaat kan worden bediend.

• Alleen voor een versterker:

upgrade your car stereo system.

• Connect the remote lead (blue with white stripe) to

the remote lead of the other equipment so that it can

be controlled through this unit.

• For amplifier only:

– Disconnect the speakers from this unit,

connect them to the amplifier. Leave the

speaker leads of this unit unused.

• Nur für den Verstärker:

• Pour l’amplificateur seulement:

– Koppel de speakers van dit apparaat los en

verbind ze aan de versterker.

– Die Lautsprecher von diesem Gerät abtrennen

und am Verstärker anschließen. Die

Lautsprecherleitungen dieses Geräts unbenutzt

lassen.

– Déconnectez les enceintes de cet appareil et

connectez-les à l’amplificateur. Laissez les fils

d’enceintes de cet appareil inutilisés.

– Vous pouvez désactiver l’amplificateur intégré et

envoyer les signaux audio uniquement à un ou

plusieurs amplificateurs extérieurs afin d’obtenir un

son clair et pour éviter un échauffement interne de

l’appareil. Référez-vous à la page 49 du mode

d’emploi (volume séparé).

– Le niveau de sortie de ligne de cet appareil est

maintenu àun niveau élevépour maintenir une qualité

Hi-Fi pour les sons reproduits par cet appareil.

Lors de la connexion d’un amplificateur extérieur

à cet appareil, diminuez le réglage du gain sur

l’amplificateur extérieur pour obtenir les meilleures

performances de cet appareil.

– U kunt de ingebouwde versterker uitschakelen zodat de

audiosignalen uitsluitend via de externe versterker(s)

worden gestuurd voor een helder geluid en het

voorkomen van oververhitting van het toestel. Zie

bladzijde 49 van de Gebruiksaanwijzing (apart boekje).

– Het uitgangsniveau van het geluid is hoog om het hifi-

geluid van deze eenheid te behouden.

Wanneer u een extern apparaat op deze

eenheid aansluit, moet u erop letten dat u de

versterkingsfactor van de externe versterker laag houdt,

zodat deze eenheid de beste prestaties levert.

– You can switch off the built-in amplifier and send the

audio signals only to the external amplifier(s) to get

clear sounds and to prevent internal heat built-up – Sie können den eingebauten Verstärker

inside the unit. See page 49 of the Instructions

(separate volume).

– The line output level of this unit is kept high to maintain

the hi-fi sounds reproduced from this unit.

When connecting an external amplifier to this

unit, turn down the gain control on the external

amplifier to obtain the best performance from this unit. – Der Ausgangspegel dieses Geräts wird auf einem

hohen Wert gehalten, um den Hifi-Klang zu

ausschalten und die Audio-Signale nur an die

externe Komponente senden, um ein klares

Klangbild zu erhalten und um eine interne

Wärmeentwicklung innerhalb des Geräts zu

verhindern. Siehe Seite 49 der Anweisungen

(separates Dokument).

unterstützen, den dieses Gerät reproduziert.

Wenn Sie einen externen Verstärker an dieses

Gerät anschließen, stellen Sie den

Verstärkungsregler des externen Verstärkers

herunter, um die bestmögliche Leistung dieses

Geräts zu erzielen.

Signal cord (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

Remote lead

Fernbedienungsleitung

Fil d’alimentation à distance

Antennedraad

Y-connector (not supplied with this unit)

Y-Anschluß (nicht mitgeliefert)

Connecteur Y (non fourni avec cet appareil)

Y-connector (niet meegeleverd)

INPUT

JVC Amplifier

JVC Verstärker

JVC Amplificateur

JVC Versterker

Remote lead (Blue with white stripe)

Fernbedienungsleitung (Blau mit weißem Streifen)

Fil d’alimentation à distance (Bleu avec bande blanche)

Antennedraad (Blauw met witte streep)

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

To power aerial if any

Zur Motorantenne, sofern vorhanden

À l’antenne automatique, s’il y en a une

Naar de antenne (indien aanwezig)

KD-SH9104/

LINE OUT (REAR)

LINE OUT (FRONT)

KD-SH9103/

KD-SH9102/

KD-SH9101

Cut the rear speaker leads of the car’s ISO connector and connect them to the amplifier.

Die Leitungen des ISO-Steckers der hinteren Lautsprecher durchtrennen und am Verstärker anschließen.

Coupez les fils des enceintes arrière du connecteur ISO de la voiture et connectez-les à l’amplificateur.

Knip de draden van de achterste luidspreker van de ISO-connector van de auto door en sluit deze draden aan op de versterker.

JVC Amplifier

JVC Verstärker

JVC Amplificateur

JVC Versterker

Front speakers

INPUT

Vordere Lautsprecher

Enceintes avant

Voorspeakers

*²Firmly attach the ground wire to the metallic body or to the chasis of the car—to the place not coated with paint

(if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the

unit.

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

*²Verbinden Sie den Erdungsleiter mit der Karosserie oder dem Rahmen des Fahrzeugs. Die Kntaktstelle darf

nicht lackiert sein (sollte die Kontaktstelle lackiert sein, entfernen Sie den Lack der Kontaktstelle, bevor Sie

den Leiter befestigen). Wenn der Erdungsleiter nicht ordnungsgemäß angeschlossen wird, kann dieses

Gerät beschädigt werden.

You can connect another power amplifier for front speakers.

Front speakers

Vordere Lautsprecher

Enceintes avant

Voorspeakers

Sie können einen anderen Leistungsverstärker für die

vorderen Lautsprecher anschließen.

*²Attachez solidement le fil de mise à la masse au châssis métallique de la voiture—à un endroit qui n’est

pas recouvert de peinture (s’il est recouvert de peinture, enlevez d’abord la peinture avant d’attacher le fil).

L’appareil peut être endommagé si cela n’est pas fait correctement.

Vous pouvez connecter un autre amplificateur de puissance

pour les enceintes avant.

*²Bevestig de aardedraad goed met een metalen onderdeel of het chassis van de auto—bevestig op een

niet-gelakt gedeelte (indien gelakt, schuur dan af alvorens de draad te bevestigen). Het toestel kan worden beschadigd

indien de aardedraad niet goed is aangesloten.

U kunt nog een eindversterker voor de voorspeakers aansluiten.

CD changer and DAB tuner / CD-Wechsler und DAB-Tuner / Changeur CD et tuner DAB / CD-wisselaar en DAB-tuner

Connecting cord supplied with your DAB tuner or CD changer

Connecting cord supplied with your DAB tuner

Verbindungskabel, das zum Lieferumfang des DAB-

Tuners gehört

Cordon de connexion fourni avec votre tuner DAB

Verbindingskabel die met de DAB-tuner wordt meegeleverd

Connecting cord supplied with your CD changer

Verbindungskabel, das zum Lieferumfang des

CD-Wechsler gehört

Cordon de connexion fourni avec votre changeur CD

Verbindingskabel die met de CD-wisselaar wordt meegeleverd

Verbindungskabel, das zum Lieferumfang des DAB-Tuners oder CD-Wechslers gehört

Cordon de connexion fourni avec votre tuner DAB ou changeur CD

Verbindingskabel die met de DAB-tuner of CD-wisselaar wordt meegeleverd

KD-SH9104/

KD-SH9103/

KD-SH9102/

KD-SH9101

JVC DAB tuner

DAB-Tuner von JVC

Tuner DAB JVC

JVC DAB-tuner

oder

JVC CD changer

CD-Wechsler von JVC

Changeur CD JVC

JVC CD-wisselaar

KD-SH9104/

KD-SH9103/

KD-SH9102/

KD-SH9101

JVC DAB tuner

JVC CD changer

DAB-Tuner von JVC

CD-Wechsler von JVC

Changeur CD JVC

JVC CD-wisselaar

Tuner DAB JVC

JVC DAB-tuner

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• Before connecting the CD changer and/or the DAB tuner, make sure that the unit is turned off.

• Bevor Sie den CD-Wechsler und/oder den DAB-Tuner anschließen, vergewissern Sie sich, daß das Gerät

ausgeschaltet ist.

• You can connect both components in series as illustrated above.

• Es ist möglich, beide Komponenten in einer Serienschaltung entsprechend der obigen Darstellung

anzuschließen.

• Vous pouvez connecter les deux appareils en série comme montré ci-dessus.

• Beide apparaten zijn volgens bovenstaande illustratie in serie aan te sluiten.

• Avant de connecter le changeur CD et/ou le tuner DAB, s’assurer que l’unité est éteinte.

• Zorg ervoor dat de apparaat is uitgeschakeld alvorens u de en/of DAB-tuner CD-wisselaar aansluit.

External Component / Externe Komponente / Appareil extérieur / Extern apparaat

Subwoofer / Subwoofer / Caisson de grave / Subwoofer

Signal cord (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (niet meegeleverd)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

Subwoofer

Caisson de

grave

External component

KD-SH9104/

JVC Amplifier

KD-SH9104/

Externe Komponente

Appareil extérieur

Extern apparaat

KD-SH9103/

KD-SH9102/

KD-SH9101

JVC Verstärker

JVC Amplificateur

JVC Versterker

KD-SH9103/

KD-SH9102/

KD-SH9101

Subwoofer

LINE IN

SUBWOOFER OUT

Motorola MOTORAZR V3xx User Manual
Motorola MOTO 68000202973 B User Manual
Moeller Marine EASY 400 User Manual
LG Electronics 5550 User Manual
Kenwood KDC MP235 User Manual
JVC KD AR800J User Manual
Hitachi Travelstar HTS725025A9A360 User Manual
Grindmaster AM 344 04 User Manual
Black & Decker TCM1000KT User Manual
Audiovox CDC MCR2 User Manual