Getting Started
Getting Started
Turning phone on & off
Helpful Functions
Volume control
Use the side keys +/– to adjust the sound volume.
The volume level is indicated on the display. When
a call is in progress, the volume control adjusts the
earpiece volume. When the phone is ringing, the
volume control adjusts the ringer volume.
PhoneEasy
Charging
Press and hold the red button
on the phone
Warning!
410gsm
to turn it on/off. It takes several seconds so keep
holding until you hear the sound.
Only use batteries, charger and accessories that have
been approved for use with this particular model.
Connecting other accessories may be dangerous and
may invalidate the phone’s warranty.
Quick Start Guide
ꢀ
Setting the language, time and date
These are all set for you. The menu language will
default to English. See the full manual if you
would like to change this setting.
To charge the battery, connect the AC power
adapter to a wall socket and to the charging
Soft keys
The soft keys
have multiple functions. The
y
socket
on the right side of the phone.
current key function is shown above the soft key on
the display.
ꢁ
The date and time are automatically set to the
local time for the area you are in when the phone
is powered on.
It takes approximately 3 hours to fully charge the
battery.
Call log
ꢀꢄ
ꢀꢃ
is displayed on the screen when charging is
completed.
Answered, missed, and outgoing calls (20) are saved
in a combined call log.
Making a call
1. Enter the phone number.
q
screen.
1. Press
with no numbers entered on the
q
L
2. Press
3. Press
Note!
to start the call.
to end the call.
Note
ꢀꢀ
ꢀꢉ
ꢈ
Before removing the battery cover, turn off the phone
and disconnect the charger.
ꢂ
2. Use the arrow keys
/
to scroll through
the call list.
There is no dial tone. Simply have the phone turned
on and it is ready for use.
ꢃ
ꢄ
ꢅ
= Incoming call
= Outgoing call
Receiving a call
= Missed call
q
L
1. Press
2. Press
to answer.
to end the call.
ꢀꢂ
q
3. Press
to dial the highlighted number or
ꢇ
press Options for the following settings:
ꢆ
ꢀꢁ
ꢀꢁ
Installing the SIM card and battery
View
Delete
Show details for the selected call
Delete the call
Display Symbols
17
18
The SIM card and battery are normally pre-
installed for you. Follow these instructions should
you ever need to access them yourself.
20
ꢀꢄ
ꢂꢃ
ꢂꢀ
Delete all Delete all calls in the call log
Save Save the number in the Phonebook
Create new Creates new contact in the Phonebook
21
Signal strength
Bluetooth on
ꢀꢅ
The SIM card holder is located behind the battery.
Ring only
Vib & ring
Vib only
Bluetooth connected
Battery level
1. Remove the battery cover by pressing it carefully
down and sliding away from the emergency call key.
2. Remove the battery if it is already installed.
3. Press lightly on the cardholder and carefully slide it
towards the emergency call key.
ꢀꢆ
Update
Update an existent contact in the
Phonebook
Headset
New SMS
When a headset is connected, the internal
microphone in the phone is disconnected. You can
use the answer key (if it has one) on the headset
cable to receive and end calls.
4. The SIM card holder can now be folded into an
upright position.
Headset
1. Loudspeaker
2. Display
13. Charging contacts, for
use with charging stand
(not included)
Alarm active
5. Placing the SIM-card on the marked area of the
compartment. Make sure that the SIM card’s
contacts are facing downwards and that the cut-off
corner is placed accordingly with the marked area.
See picture. Take care not to scratch or bend the
contacts on the SIM card.
6. Fold the SIM-card holder down and carefully slid it
away from the emergency call key until it “clicks”
into place.
connected
3. Left soft key
4. Call key
14. Led light (new message/
Silent
missed call)
5. 1 / Voice mail
6. Numeric keypad
7. Microphone
15. Led light
Attaching a lanyard to the phone
(battery level low)
16. Emergency call key
17. Charging socket
18. Headset socket
19. Battery cover
20. Side key +
8. # / Silent mode on/off
9. End call/Power on/off
10. Arrow keys
11. Right soft key
7. Insert the battery by sliding it into the battery
compartment with the contacts facing towards the
emergency call key.
12. For lanyard attaching
21. Side key -
8. Replace the battery cover until it “clicks” into place.
The complete User Guide can be downloaded at
OR
You may also view helpful how-to videos at
2.
3.
4.
Using Phonebook
Text Messaging
Other Call Options
Useful Tools
The Phonebook can store 100 entries with 3 phone
numbers in each entry.
Text input tips
Voice mail
Calendar
Each time you press a key you will scroll through
the three letter options. Once the letter you would
like is highlighted, pause for a moment and it will
be selected. You can then begin pressing a key to
select the next letter.
The voice mailbox can be called by pressing and
holding
Use the Calendar to store tasks to help you keep
track of important events.
Creating a Phonebook entry
.
1
1. Press Menu, scroll to Phonebook
and
->Menu->
->Options->Add task
Speed dial
The numerical keys
speed dialing.
press OK.
and
–
2 9
can be used for
0
Use the arrow keys
/
to enter the date
2. Select -New contact- and press Add.
3. Enter a name. Delete with Clear.
and time for the task. Press Edit to add text for
the task and then press �one. Press Save to
save the task.
Press * for a list of special characters. Select the
desired character and press OK to enter it.
Adding speed dial numbers
->Menu->Settings->Speed dial
Note! Each time you press a key you will scroll
through the letter options. Once the letter you
would like is highlighted, pause for a moment
and it will be selected. You can then begin
pressing a key to select the next letter.
Use the + keys – on the side of the phone to
move the cursor within the text you have entered.
At the recorded date/time, an alert tone will be
played and the task description will be shown on
the display.
Select
and press Add.
0
Press # to switch the text entry between upper
case, lower case and numbers.
Select an entry from the Phonebook and press OK.
4. Use
/
to select Mobile, Home
Repeat to add speed dial entries for keys – .
2 9
Note!
number or Office number, and enter the
The tasks function will work even when the phone
is switched off.
To speed dial an entry, press and hold the
corresponding number key.
phone number(s), then press Save.
5. Press
L
to return to standby.
Calculator
->Menu->
Deleting entries in Phonebook
->Menu->Phonebook->Scroll to desired
entry->Options->Scroll to �elete->OK
The Calculator can perform basic math
operations. Use the arrow keys
/
to
Press Yes to confirm or No to Cancel.
scroll between the math options along the
Making a call from the Phonebook
right and select OK when the proper option is
highlighted.
Press the key
Phonebook.
under Name to open the
Use
/
to scroll through the Phonebook.
Press the send key
highlighted entry.
under Call to dial the
Text Messaging
Custom Settings
Useful Tools
Additional Information
Creating and sending messages
Silent mode
Alarm
SOS/911 calls
When the phone is turned on, the right soft key
shows SOS before the SIM card is activated or if
the phone lock is on.
->Menu->Messages->Write message
Use Silent to silence your ring tones.
Vibration and key tone settings are unchanged.
Use the Alarm feature to set wake-up call or help
you keep track of an important time.
1. Type the message you would like to send. See
Text input tips for help.
Press and hold
to activate/deactivate Silent.
->Menu->
#
Press SOS, then Yes to automatically call 911.
Press No to return to the activation screen.
If you pressed Yes by mistake, press Cancel
immediately to cancel the call.
2. When message is ready press �one.
Hightlight desired send option and press OK.
3. Enter in phone number to send to or press
Search to select an entry in your Phonebook
and press OK.
Toggle it on/off with the arrow keys
/
Changing ring tones
and then select OK. Turning on an alarm will take
you to the edit screen where you will enter the
time you wish the alarm to sound. After entering
the time, select OK to reach the screen where
you can switch between am and pm. Select
Repeated and press OK or Single and press
Save.
You can select from 20 different ring tone options
Follow this sequence to reach the ring tone
customization.
As long as the phone is on and you are within
reach of cellular service, you can always place an
->Menu->Settings->Tone settings
->Tone setup->Ring tone
Reading an incoming message
When you receive a message while your phone is
on, the screen will display . Press Read to read
the message.
q
SOS call by entering 911 followed by
.
Use the arrow keys
/
to scroll between
Note!
If Repeated is selected scroll through the list of
weekdays and press On/Off to enable/disable the
alarm for each weekday, then press Save.
ring tone options. When you pause on a melody,
you will hear its sound. Once you have found the
ring tone you wish to use, press OK to select.
Sometimes an emergency call cannot be placed
due to network, environment or interference
issues.
You can also read messages by accessing the
inbox.
->Menu->Messages->Inbox
Note!
You can use this same process to customize
the tones for your the Alarm, Opening tone,
Closing tone, Message tone and Keypad
tone in the same way.
Emergency Call key
The alarm function will work even when the phone
is switched off.
The Emergency Call key on the back of the
phone will automatically dial one number for
you. This can be used as a easy way to reach a
family member or friend if you need help. The
Emergency Call function must be activated before
use. See the full manual at
To read messages you have sent and saved
enter.
->Menu->Messages->Outbox
Game
->Menu->
->OK
Display background (wallpaper)
You can select from 8 different display
backgrounds.
Select a game (e.g., Robot), then press OK for
settings.
www.doro.com for instructions.
->Menu->Settings->User setup
->Wallpaper
Select Help to learn how to play each game.
5.
6.
7.
8.
|